|  | /* | 
|  | *  Routines for control of the CS8427 via i2c bus | 
|  | *  IEC958 (S/PDIF) receiver & transmitter by Cirrus Logic | 
|  | *  Copyright (c) by Jaroslav Kysela <perex@perex.cz> | 
|  | * | 
|  | * | 
|  | *   This program is free software; you can redistribute it and/or modify | 
|  | *   it under the terms of the GNU General Public License as published by | 
|  | *   the Free Software Foundation; either version 2 of the License, or | 
|  | *   (at your option) any later version. | 
|  | * | 
|  | *   This program is distributed in the hope that it will be useful, | 
|  | *   but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | *   GNU General Public License for more details. | 
|  | * | 
|  | *   You should have received a copy of the GNU General Public License | 
|  | *   along with this program; if not, write to the Free Software | 
|  | *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/slab.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/init.h> | 
|  | #include <asm/unaligned.h> | 
|  | #include <sound/core.h> | 
|  | #include <sound/control.h> | 
|  | #include <sound/pcm.h> | 
|  | #include <sound/cs8427.h> | 
|  | #include <sound/asoundef.h> | 
|  |  | 
|  | static void snd_cs8427_reset(struct snd_i2c_device *cs8427); | 
|  |  | 
|  | MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>"); | 
|  | MODULE_DESCRIPTION("IEC958 (S/PDIF) receiver & transmitter by Cirrus Logic"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | #define CS8427_ADDR			(0x20>>1) /* fixed address */ | 
|  |  | 
|  | struct cs8427_stream { | 
|  | struct snd_pcm_substream *substream; | 
|  | char hw_status[24];		/* hardware status */ | 
|  | char def_status[24];		/* default status */ | 
|  | char pcm_status[24];		/* PCM private status */ | 
|  | char hw_udata[32]; | 
|  | struct snd_kcontrol *pcm_ctl; | 
|  | }; | 
|  |  | 
|  | struct cs8427 { | 
|  | unsigned char regmap[0x14];	/* map of first 1 + 13 registers */ | 
|  | unsigned int rate; | 
|  | unsigned int reset_timeout; | 
|  | struct cs8427_stream playback; | 
|  | struct cs8427_stream capture; | 
|  | }; | 
|  |  | 
|  | static unsigned char swapbits(unsigned char val) | 
|  | { | 
|  | int bit; | 
|  | unsigned char res = 0; | 
|  | for (bit = 0; bit < 8; bit++) { | 
|  | res <<= 1; | 
|  | res |= val & 1; | 
|  | val >>= 1; | 
|  | } | 
|  | return res; | 
|  | } | 
|  |  | 
|  | int snd_cs8427_reg_write(struct snd_i2c_device *device, unsigned char reg, | 
|  | unsigned char val) | 
|  | { | 
|  | int err; | 
|  | unsigned char buf[2]; | 
|  |  | 
|  | buf[0] = reg & 0x7f; | 
|  | buf[1] = val; | 
|  | if ((err = snd_i2c_sendbytes(device, buf, 2)) != 2) { | 
|  | snd_printk(KERN_ERR "unable to send bytes 0x%02x:0x%02x " | 
|  | "to CS8427 (%i)\n", buf[0], buf[1], err); | 
|  | return err < 0 ? err : -EIO; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(snd_cs8427_reg_write); | 
|  |  | 
|  | static int snd_cs8427_reg_read(struct snd_i2c_device *device, unsigned char reg) | 
|  | { | 
|  | int err; | 
|  | unsigned char buf; | 
|  |  | 
|  | if ((err = snd_i2c_sendbytes(device, ®, 1)) != 1) { | 
|  | snd_printk(KERN_ERR "unable to send register 0x%x byte " | 
|  | "to CS8427\n", reg); | 
|  | return err < 0 ? err : -EIO; | 
|  | } | 
|  | if ((err = snd_i2c_readbytes(device, &buf, 1)) != 1) { | 
|  | snd_printk(KERN_ERR "unable to read register 0x%x byte " | 
|  | "from CS8427\n", reg); | 
|  | return err < 0 ? err : -EIO; | 
|  | } | 
|  | return buf; | 
|  | } | 
|  |  | 
|  | static int snd_cs8427_select_corudata(struct snd_i2c_device *device, int udata) | 
|  | { | 
|  | struct cs8427 *chip = device->private_data; | 
|  | int err; | 
|  |  | 
|  | udata = udata ? CS8427_BSEL : 0; | 
|  | if (udata != (chip->regmap[CS8427_REG_CSDATABUF] & udata)) { | 
|  | chip->regmap[CS8427_REG_CSDATABUF] &= ~CS8427_BSEL; | 
|  | chip->regmap[CS8427_REG_CSDATABUF] |= udata; | 
|  | err = snd_cs8427_reg_write(device, CS8427_REG_CSDATABUF, | 
|  | chip->regmap[CS8427_REG_CSDATABUF]); | 
|  | if (err < 0) | 
|  | return err; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_cs8427_send_corudata(struct snd_i2c_device *device, | 
|  | int udata, | 
|  | unsigned char *ndata, | 
|  | int count) | 
|  | { | 
|  | struct cs8427 *chip = device->private_data; | 
|  | char *hw_data = udata ? | 
|  | chip->playback.hw_udata : chip->playback.hw_status; | 
|  | char data[32]; | 
|  | int err, idx; | 
|  |  | 
|  | if (!memcmp(hw_data, ndata, count)) | 
|  | return 0; | 
|  | if ((err = snd_cs8427_select_corudata(device, udata)) < 0) | 
|  | return err; | 
|  | memcpy(hw_data, ndata, count); | 
|  | if (udata) { | 
|  | memset(data, 0, sizeof(data)); | 
|  | if (memcmp(hw_data, data, count) == 0) { | 
|  | chip->regmap[CS8427_REG_UDATABUF] &= ~CS8427_UBMMASK; | 
|  | chip->regmap[CS8427_REG_UDATABUF] |= CS8427_UBMZEROS | | 
|  | CS8427_EFTUI; | 
|  | err = snd_cs8427_reg_write(device, CS8427_REG_UDATABUF, | 
|  | chip->regmap[CS8427_REG_UDATABUF]); | 
|  | return err < 0 ? err : 0; | 
|  | } | 
|  | } | 
|  | data[0] = CS8427_REG_AUTOINC | CS8427_REG_CORU_DATABUF; | 
|  | for (idx = 0; idx < count; idx++) | 
|  | data[idx + 1] = swapbits(ndata[idx]); | 
|  | if (snd_i2c_sendbytes(device, data, count + 1) != count + 1) | 
|  | return -EIO; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static void snd_cs8427_free(struct snd_i2c_device *device) | 
|  | { | 
|  | kfree(device->private_data); | 
|  | } | 
|  |  | 
|  | int snd_cs8427_create(struct snd_i2c_bus *bus, | 
|  | unsigned char addr, | 
|  | unsigned int reset_timeout, | 
|  | struct snd_i2c_device **r_cs8427) | 
|  | { | 
|  | static unsigned char initvals1[] = { | 
|  | CS8427_REG_CONTROL1 | CS8427_REG_AUTOINC, | 
|  | /* CS8427_REG_CONTROL1: RMCK to OMCK, valid PCM audio, disable mutes, | 
|  | TCBL=output */ | 
|  | CS8427_SWCLK | CS8427_TCBLDIR, | 
|  | /* CS8427_REG_CONTROL2: hold last valid audio sample, RMCK=256*Fs, | 
|  | normal stereo operation */ | 
|  | 0x00, | 
|  | /* CS8427_REG_DATAFLOW: output drivers normal operation, Tx<=serial, | 
|  | Rx=>serial */ | 
|  | CS8427_TXDSERIAL | CS8427_SPDAES3RECEIVER, | 
|  | /* CS8427_REG_CLOCKSOURCE: Run off, CMCK=256*Fs, | 
|  | output time base = OMCK, input time base = recovered input clock, | 
|  | recovered input clock source is ILRCK changed to AES3INPUT | 
|  | (workaround, see snd_cs8427_reset) */ | 
|  | CS8427_RXDILRCK, | 
|  | /* CS8427_REG_SERIALINPUT: Serial audio input port data format = I2S, | 
|  | 24-bit, 64*Fsi */ | 
|  | CS8427_SIDEL | CS8427_SILRPOL, | 
|  | /* CS8427_REG_SERIALOUTPUT: Serial audio output port data format | 
|  | = I2S, 24-bit, 64*Fsi */ | 
|  | CS8427_SODEL | CS8427_SOLRPOL, | 
|  | }; | 
|  | static unsigned char initvals2[] = { | 
|  | CS8427_REG_RECVERRMASK | CS8427_REG_AUTOINC, | 
|  | /* CS8427_REG_RECVERRMASK: unmask the input PLL clock, V, confidence, | 
|  | biphase, parity status bits */ | 
|  | /* CS8427_UNLOCK | CS8427_V | CS8427_CONF | CS8427_BIP | CS8427_PAR,*/ | 
|  | 0xff, /* set everything */ | 
|  | /* CS8427_REG_CSDATABUF: | 
|  | Registers 32-55 window to CS buffer | 
|  | Inhibit D->E transfers from overwriting first 5 bytes of CS data. | 
|  | Inhibit D->E transfers (all) of CS data. | 
|  | Allow E->F transfer of CS data. | 
|  | One byte mode; both A/B channels get same written CB data. | 
|  | A channel info is output to chip's EMPH* pin. */ | 
|  | CS8427_CBMR | CS8427_DETCI, | 
|  | /* CS8427_REG_UDATABUF: | 
|  | Use internal buffer to transmit User (U) data. | 
|  | Chip's U pin is an output. | 
|  | Transmit all O's for user data. | 
|  | Inhibit D->E transfers. | 
|  | Inhibit E->F transfers. */ | 
|  | CS8427_UD | CS8427_EFTUI | CS8427_DETUI, | 
|  | }; | 
|  | int err; | 
|  | struct cs8427 *chip; | 
|  | struct snd_i2c_device *device; | 
|  | unsigned char buf[24]; | 
|  |  | 
|  | if ((err = snd_i2c_device_create(bus, "CS8427", | 
|  | CS8427_ADDR | (addr & 7), | 
|  | &device)) < 0) | 
|  | return err; | 
|  | chip = device->private_data = kzalloc(sizeof(*chip), GFP_KERNEL); | 
|  | if (chip == NULL) { | 
|  | snd_i2c_device_free(device); | 
|  | return -ENOMEM; | 
|  | } | 
|  | device->private_free = snd_cs8427_free; | 
|  |  | 
|  | snd_i2c_lock(bus); | 
|  | err = snd_cs8427_reg_read(device, CS8427_REG_ID_AND_VER); | 
|  | if (err != CS8427_VER8427A) { | 
|  | /* give second chance */ | 
|  | snd_printk(KERN_WARNING "invalid CS8427 signature 0x%x: " | 
|  | "let me try again...\n", err); | 
|  | err = snd_cs8427_reg_read(device, CS8427_REG_ID_AND_VER); | 
|  | } | 
|  | if (err != CS8427_VER8427A) { | 
|  | snd_i2c_unlock(bus); | 
|  | snd_printk(KERN_ERR "unable to find CS8427 signature " | 
|  | "(expected 0x%x, read 0x%x),\n", | 
|  | CS8427_VER8427A, err); | 
|  | snd_printk(KERN_ERR "   initialization is not completed\n"); | 
|  | return -EFAULT; | 
|  | } | 
|  | /* turn off run bit while making changes to configuration */ | 
|  | err = snd_cs8427_reg_write(device, CS8427_REG_CLOCKSOURCE, 0x00); | 
|  | if (err < 0) | 
|  | goto __fail; | 
|  | /* send initial values */ | 
|  | memcpy(chip->regmap + (initvals1[0] & 0x7f), initvals1 + 1, 6); | 
|  | if ((err = snd_i2c_sendbytes(device, initvals1, 7)) != 7) { | 
|  | err = err < 0 ? err : -EIO; | 
|  | goto __fail; | 
|  | } | 
|  | /* Turn off CS8427 interrupt stuff that is not used in hardware */ | 
|  | memset(buf, 0, 7); | 
|  | /* from address 9 to 15 */ | 
|  | buf[0] = 9;	/* register */ | 
|  | if ((err = snd_i2c_sendbytes(device, buf, 7)) != 7) | 
|  | goto __fail; | 
|  | /* send transfer initialization sequence */ | 
|  | memcpy(chip->regmap + (initvals2[0] & 0x7f), initvals2 + 1, 3); | 
|  | if ((err = snd_i2c_sendbytes(device, initvals2, 4)) != 4) { | 
|  | err = err < 0 ? err : -EIO; | 
|  | goto __fail; | 
|  | } | 
|  | /* write default channel status bytes */ | 
|  | put_unaligned_le32(SNDRV_PCM_DEFAULT_CON_SPDIF, buf); | 
|  | memset(buf + 4, 0, 24 - 4); | 
|  | if (snd_cs8427_send_corudata(device, 0, buf, 24) < 0) | 
|  | goto __fail; | 
|  | memcpy(chip->playback.def_status, buf, 24); | 
|  | memcpy(chip->playback.pcm_status, buf, 24); | 
|  | snd_i2c_unlock(bus); | 
|  |  | 
|  | /* turn on run bit and rock'n'roll */ | 
|  | if (reset_timeout < 1) | 
|  | reset_timeout = 1; | 
|  | chip->reset_timeout = reset_timeout; | 
|  | snd_cs8427_reset(device); | 
|  |  | 
|  | #if 0	// it's nice for read tests | 
|  | { | 
|  | char buf[128]; | 
|  | int xx; | 
|  | buf[0] = 0x81; | 
|  | snd_i2c_sendbytes(device, buf, 1); | 
|  | snd_i2c_readbytes(device, buf, 127); | 
|  | for (xx = 0; xx < 127; xx++) | 
|  | printk(KERN_DEBUG "reg[0x%x] = 0x%x\n", xx+1, buf[xx]); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if (r_cs8427) | 
|  | *r_cs8427 = device; | 
|  | return 0; | 
|  |  | 
|  | __fail: | 
|  | snd_i2c_unlock(bus); | 
|  | snd_i2c_device_free(device); | 
|  | return err < 0 ? err : -EIO; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(snd_cs8427_create); | 
|  |  | 
|  | /* | 
|  | * Reset the chip using run bit, also lock PLL using ILRCK and | 
|  | * put back AES3INPUT. This workaround is described in latest | 
|  | * CS8427 datasheet, otherwise TXDSERIAL will not work. | 
|  | */ | 
|  | static void snd_cs8427_reset(struct snd_i2c_device *cs8427) | 
|  | { | 
|  | struct cs8427 *chip; | 
|  | unsigned long end_time; | 
|  | int data, aes3input = 0; | 
|  |  | 
|  | if (snd_BUG_ON(!cs8427)) | 
|  | return; | 
|  | chip = cs8427->private_data; | 
|  | snd_i2c_lock(cs8427->bus); | 
|  | if ((chip->regmap[CS8427_REG_CLOCKSOURCE] & CS8427_RXDAES3INPUT) == | 
|  | CS8427_RXDAES3INPUT)  /* AES3 bit is set */ | 
|  | aes3input = 1; | 
|  | chip->regmap[CS8427_REG_CLOCKSOURCE] &= ~(CS8427_RUN | CS8427_RXDMASK); | 
|  | snd_cs8427_reg_write(cs8427, CS8427_REG_CLOCKSOURCE, | 
|  | chip->regmap[CS8427_REG_CLOCKSOURCE]); | 
|  | udelay(200); | 
|  | chip->regmap[CS8427_REG_CLOCKSOURCE] |= CS8427_RUN | CS8427_RXDILRCK; | 
|  | snd_cs8427_reg_write(cs8427, CS8427_REG_CLOCKSOURCE, | 
|  | chip->regmap[CS8427_REG_CLOCKSOURCE]); | 
|  | udelay(200); | 
|  | snd_i2c_unlock(cs8427->bus); | 
|  | end_time = jiffies + chip->reset_timeout; | 
|  | while (time_after_eq(end_time, jiffies)) { | 
|  | snd_i2c_lock(cs8427->bus); | 
|  | data = snd_cs8427_reg_read(cs8427, CS8427_REG_RECVERRORS); | 
|  | snd_i2c_unlock(cs8427->bus); | 
|  | if (!(data & CS8427_UNLOCK)) | 
|  | break; | 
|  | schedule_timeout_uninterruptible(1); | 
|  | } | 
|  | snd_i2c_lock(cs8427->bus); | 
|  | chip->regmap[CS8427_REG_CLOCKSOURCE] &= ~CS8427_RXDMASK; | 
|  | if (aes3input) | 
|  | chip->regmap[CS8427_REG_CLOCKSOURCE] |= CS8427_RXDAES3INPUT; | 
|  | snd_cs8427_reg_write(cs8427, CS8427_REG_CLOCKSOURCE, | 
|  | chip->regmap[CS8427_REG_CLOCKSOURCE]); | 
|  | snd_i2c_unlock(cs8427->bus); | 
|  | } | 
|  |  | 
|  | static int snd_cs8427_in_status_info(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_info *uinfo) | 
|  | { | 
|  | uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | 
|  | uinfo->count = 1; | 
|  | uinfo->value.integer.min = 0; | 
|  | uinfo->value.integer.max = 255; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_cs8427_in_status_get(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_i2c_device *device = snd_kcontrol_chip(kcontrol); | 
|  | int data; | 
|  |  | 
|  | snd_i2c_lock(device->bus); | 
|  | data = snd_cs8427_reg_read(device, kcontrol->private_value); | 
|  | snd_i2c_unlock(device->bus); | 
|  | if (data < 0) | 
|  | return data; | 
|  | ucontrol->value.integer.value[0] = data; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_cs8427_qsubcode_info(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_info *uinfo) | 
|  | { | 
|  | uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES; | 
|  | uinfo->count = 10; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_cs8427_qsubcode_get(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_i2c_device *device = snd_kcontrol_chip(kcontrol); | 
|  | unsigned char reg = CS8427_REG_QSUBCODE; | 
|  | int err; | 
|  |  | 
|  | snd_i2c_lock(device->bus); | 
|  | if ((err = snd_i2c_sendbytes(device, ®, 1)) != 1) { | 
|  | snd_printk(KERN_ERR "unable to send register 0x%x byte " | 
|  | "to CS8427\n", reg); | 
|  | snd_i2c_unlock(device->bus); | 
|  | return err < 0 ? err : -EIO; | 
|  | } | 
|  | err = snd_i2c_readbytes(device, ucontrol->value.bytes.data, 10); | 
|  | if (err != 10) { | 
|  | snd_printk(KERN_ERR "unable to read Q-subcode bytes " | 
|  | "from CS8427\n"); | 
|  | snd_i2c_unlock(device->bus); | 
|  | return err < 0 ? err : -EIO; | 
|  | } | 
|  | snd_i2c_unlock(device->bus); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_cs8427_spdif_info(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_info *uinfo) | 
|  | { | 
|  | uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; | 
|  | uinfo->count = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_cs8427_spdif_get(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_i2c_device *device = snd_kcontrol_chip(kcontrol); | 
|  | struct cs8427 *chip = device->private_data; | 
|  |  | 
|  | snd_i2c_lock(device->bus); | 
|  | memcpy(ucontrol->value.iec958.status, chip->playback.def_status, 24); | 
|  | snd_i2c_unlock(device->bus); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_cs8427_spdif_put(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_i2c_device *device = snd_kcontrol_chip(kcontrol); | 
|  | struct cs8427 *chip = device->private_data; | 
|  | unsigned char *status = kcontrol->private_value ? | 
|  | chip->playback.pcm_status : chip->playback.def_status; | 
|  | struct snd_pcm_runtime *runtime = chip->playback.substream ? | 
|  | chip->playback.substream->runtime : NULL; | 
|  | int err, change; | 
|  |  | 
|  | snd_i2c_lock(device->bus); | 
|  | change = memcmp(ucontrol->value.iec958.status, status, 24) != 0; | 
|  | memcpy(status, ucontrol->value.iec958.status, 24); | 
|  | if (change && (kcontrol->private_value ? | 
|  | runtime != NULL : runtime == NULL)) { | 
|  | err = snd_cs8427_send_corudata(device, 0, status, 24); | 
|  | if (err < 0) | 
|  | change = err; | 
|  | } | 
|  | snd_i2c_unlock(device->bus); | 
|  | return change; | 
|  | } | 
|  |  | 
|  | static int snd_cs8427_spdif_mask_info(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_info *uinfo) | 
|  | { | 
|  | uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; | 
|  | uinfo->count = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_cs8427_spdif_mask_get(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | memset(ucontrol->value.iec958.status, 0xff, 24); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct snd_kcontrol_new snd_cs8427_iec958_controls[] = { | 
|  | { | 
|  | .iface =	SNDRV_CTL_ELEM_IFACE_PCM, | 
|  | .info =		snd_cs8427_in_status_info, | 
|  | .name =		"IEC958 CS8427 Input Status", | 
|  | .access =	(SNDRV_CTL_ELEM_ACCESS_READ | | 
|  | SNDRV_CTL_ELEM_ACCESS_VOLATILE), | 
|  | .get =		snd_cs8427_in_status_get, | 
|  | .private_value = 15, | 
|  | }, | 
|  | { | 
|  | .iface =	SNDRV_CTL_ELEM_IFACE_PCM, | 
|  | .info =		snd_cs8427_in_status_info, | 
|  | .name =		"IEC958 CS8427 Error Status", | 
|  | .access =	(SNDRV_CTL_ELEM_ACCESS_READ | | 
|  | SNDRV_CTL_ELEM_ACCESS_VOLATILE), | 
|  | .get =		snd_cs8427_in_status_get, | 
|  | .private_value = 16, | 
|  | }, | 
|  | { | 
|  | .access =	SNDRV_CTL_ELEM_ACCESS_READ, | 
|  | .iface =	SNDRV_CTL_ELEM_IFACE_PCM, | 
|  | .name =		SNDRV_CTL_NAME_IEC958("",PLAYBACK,MASK), | 
|  | .info =		snd_cs8427_spdif_mask_info, | 
|  | .get =		snd_cs8427_spdif_mask_get, | 
|  | }, | 
|  | { | 
|  | .iface =	SNDRV_CTL_ELEM_IFACE_PCM, | 
|  | .name =		SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), | 
|  | .info =		snd_cs8427_spdif_info, | 
|  | .get =		snd_cs8427_spdif_get, | 
|  | .put =		snd_cs8427_spdif_put, | 
|  | .private_value = 0 | 
|  | }, | 
|  | { | 
|  | .access =	(SNDRV_CTL_ELEM_ACCESS_READWRITE | | 
|  | SNDRV_CTL_ELEM_ACCESS_INACTIVE), | 
|  | .iface =	SNDRV_CTL_ELEM_IFACE_PCM, | 
|  | .name =		SNDRV_CTL_NAME_IEC958("",PLAYBACK,PCM_STREAM), | 
|  | .info =		snd_cs8427_spdif_info, | 
|  | .get =		snd_cs8427_spdif_get, | 
|  | .put =		snd_cs8427_spdif_put, | 
|  | .private_value = 1 | 
|  | }, | 
|  | { | 
|  | .iface =	SNDRV_CTL_ELEM_IFACE_PCM, | 
|  | .info =		snd_cs8427_qsubcode_info, | 
|  | .name =		"IEC958 Q-subcode Capture Default", | 
|  | .access =	(SNDRV_CTL_ELEM_ACCESS_READ | | 
|  | SNDRV_CTL_ELEM_ACCESS_VOLATILE), | 
|  | .get =		snd_cs8427_qsubcode_get | 
|  | }}; | 
|  |  | 
|  | int snd_cs8427_iec958_build(struct snd_i2c_device *cs8427, | 
|  | struct snd_pcm_substream *play_substream, | 
|  | struct snd_pcm_substream *cap_substream) | 
|  | { | 
|  | struct cs8427 *chip = cs8427->private_data; | 
|  | struct snd_kcontrol *kctl; | 
|  | unsigned int idx; | 
|  | int err; | 
|  |  | 
|  | if (snd_BUG_ON(!play_substream || !cap_substream)) | 
|  | return -EINVAL; | 
|  | for (idx = 0; idx < ARRAY_SIZE(snd_cs8427_iec958_controls); idx++) { | 
|  | kctl = snd_ctl_new1(&snd_cs8427_iec958_controls[idx], cs8427); | 
|  | if (kctl == NULL) | 
|  | return -ENOMEM; | 
|  | kctl->id.device = play_substream->pcm->device; | 
|  | kctl->id.subdevice = play_substream->number; | 
|  | err = snd_ctl_add(cs8427->bus->card, kctl); | 
|  | if (err < 0) | 
|  | return err; | 
|  | if (! strcmp(kctl->id.name, | 
|  | SNDRV_CTL_NAME_IEC958("",PLAYBACK,PCM_STREAM))) | 
|  | chip->playback.pcm_ctl = kctl; | 
|  | } | 
|  |  | 
|  | chip->playback.substream = play_substream; | 
|  | chip->capture.substream = cap_substream; | 
|  | if (snd_BUG_ON(!chip->playback.pcm_ctl)) | 
|  | return -EIO; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(snd_cs8427_iec958_build); | 
|  |  | 
|  | int snd_cs8427_iec958_active(struct snd_i2c_device *cs8427, int active) | 
|  | { | 
|  | struct cs8427 *chip; | 
|  |  | 
|  | if (snd_BUG_ON(!cs8427)) | 
|  | return -ENXIO; | 
|  | chip = cs8427->private_data; | 
|  | if (active) | 
|  | memcpy(chip->playback.pcm_status, | 
|  | chip->playback.def_status, 24); | 
|  | chip->playback.pcm_ctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_INACTIVE; | 
|  | snd_ctl_notify(cs8427->bus->card, | 
|  | SNDRV_CTL_EVENT_MASK_VALUE | SNDRV_CTL_EVENT_MASK_INFO, | 
|  | &chip->playback.pcm_ctl->id); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(snd_cs8427_iec958_active); | 
|  |  | 
|  | int snd_cs8427_iec958_pcm(struct snd_i2c_device *cs8427, unsigned int rate) | 
|  | { | 
|  | struct cs8427 *chip; | 
|  | char *status; | 
|  | int err, reset; | 
|  |  | 
|  | if (snd_BUG_ON(!cs8427)) | 
|  | return -ENXIO; | 
|  | chip = cs8427->private_data; | 
|  | status = chip->playback.pcm_status; | 
|  | snd_i2c_lock(cs8427->bus); | 
|  | if (status[0] & IEC958_AES0_PROFESSIONAL) { | 
|  | status[0] &= ~IEC958_AES0_PRO_FS; | 
|  | switch (rate) { | 
|  | case 32000: status[0] |= IEC958_AES0_PRO_FS_32000; break; | 
|  | case 44100: status[0] |= IEC958_AES0_PRO_FS_44100; break; | 
|  | case 48000: status[0] |= IEC958_AES0_PRO_FS_48000; break; | 
|  | default: status[0] |= IEC958_AES0_PRO_FS_NOTID; break; | 
|  | } | 
|  | } else { | 
|  | status[3] &= ~IEC958_AES3_CON_FS; | 
|  | switch (rate) { | 
|  | case 32000: status[3] |= IEC958_AES3_CON_FS_32000; break; | 
|  | case 44100: status[3] |= IEC958_AES3_CON_FS_44100; break; | 
|  | case 48000: status[3] |= IEC958_AES3_CON_FS_48000; break; | 
|  | } | 
|  | } | 
|  | err = snd_cs8427_send_corudata(cs8427, 0, status, 24); | 
|  | if (err > 0) | 
|  | snd_ctl_notify(cs8427->bus->card, | 
|  | SNDRV_CTL_EVENT_MASK_VALUE, | 
|  | &chip->playback.pcm_ctl->id); | 
|  | reset = chip->rate != rate; | 
|  | chip->rate = rate; | 
|  | snd_i2c_unlock(cs8427->bus); | 
|  | if (reset) | 
|  | snd_cs8427_reset(cs8427); | 
|  | return err < 0 ? err : 0; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(snd_cs8427_iec958_pcm); | 
|  |  | 
|  | static int __init alsa_cs8427_module_init(void) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit alsa_cs8427_module_exit(void) | 
|  | { | 
|  | } | 
|  |  | 
|  | module_init(alsa_cs8427_module_init) | 
|  | module_exit(alsa_cs8427_module_exit) |