| /* |
| * Copyright 2017 NXP |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/ioport.h> |
| #include <linux/kernel.h> |
| #include <linux/miscdevice.h> |
| #include <linux/module.h> |
| #include <linux/mxc_sim_interface.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/poll.h> |
| #include <linux/sched.h> |
| #include <linux/spinlock.h> |
| #include <linux/time.h> |
| #include <linux/types.h> |
| |
| #define DRIVER_NAME "mxc_emvsim" |
| |
| /* Definitions of the offset of the SIM hardware registers */ |
| #define EMV_SIM_VER_ID 0X00 |
| #define EMV_SIM_PARAM 0X04 |
| #define EMV_SIM_CLKCFG 0X08 |
| #define EMV_SIM_DIVISOR 0X0C |
| #define EMV_SIM_CTRL 0X10 |
| #define EMV_SIM_INT_MASK 0X14 |
| #define EMV_SIM_RX_THD 0X18 |
| #define EMV_SIM_TX_THD 0X1C |
| #define EMV_SIM_RX_STATUS 0X20 |
| #define EMV_SIM_TX_STATUS 0X24 |
| #define EMV_SIM_PCSR 0X28 |
| #define EMV_SIM_RX_BUF 0X2C |
| #define EMV_SIM_TX_BUF 0X30 |
| #define EMV_SIM_TX_GETU 0X34 |
| #define EMV_SIM_CWT_VAL 0X38 |
| #define EMV_SIM_BWT_VAL 0X3C |
| #define EMV_SIM_BGT_VAL 0X40 |
| #define EMV_SIM_GPCNT0_VAL 0X44 |
| #define EMV_SIM_GPCNT1_VAL 0X48 |
| |
| #define SIM_XMT_BUFFER_SIZE 300 |
| #define SIM_RCV_BUFFER_SIZE 400 |
| |
| #define SIM_TX_FIFO_DEPTH 16 |
| #define SIM_RX_FIFO_DEPTH 16 |
| #define TX_FIFO_THRESHOLD 4 |
| |
| #define SIM_STATE_REMOVED 0 |
| #define SIM_STATE_DETECTED 1 |
| #define SIM_STATE_ATR_RECEIVING 2 |
| #define SIM_STATE_ATR_RECEIVED 3 |
| #define SIM_STATE_XMTING 4 |
| #define SIM_STATE_XMT_DONE 5 |
| #define SIM_STATE_XMT_ERROR 6 |
| #define SIM_STATE_RECEIVING 7 |
| #define SIM_STATE_RECEIVE_DONE 8 |
| #define SIM_STATE_RECEIVE_ERROR 9 |
| #define SIM_STATE_RESET_SEQUENCY 10 |
| |
| #define SIM_CNTL_GPCNT_CARD_CLK 1 |
| #define SIM_CNTL_GPCNT_RCV_CLK 2 |
| #define SIM_CNTL_GPCNT_ETU_CLK 3 |
| #define SIM_EMV_NACK_THRESHOLD 5 |
| #define EMV_T0_BGT 16 |
| #define EMV_T1_BGT 22 |
| #define ATR_THRESHOLD_MAX 100 |
| #define ATR_MAX_CWT 10080 |
| #define ATR_MAX_DURATION 20160 |
| #define FCLK_FREQ 4000000 |
| |
| #define ATR_TIMEOUT 5 |
| #define TX_TIMEOUT 10 |
| #define RX_TIMEOUT 100 |
| #define RESET_RETRY_TIMES 5 |
| #define EMV_RESET_LOW_CYCLES 40000 |
| #define ATR_MAX_DELAY_CLK 46400 |
| #define DIVISOR_VALUE 372 |
| |
| #define SIM_CNTL_GPCNT0_CLK_SEL_MASK (3 << 10) |
| #define SIM_CNTL_GPCNT0_CLK_SEL(x) ((x & 3) << 10) |
| #define SIM_CNTL_GPCNT1_CLK_SEL_MASK (3 << 8) |
| #define SIM_CNTL_GPCNT1_CLK_SEL(x) ((x & 3) << 8) |
| |
| /* EMV_SIM_CTRL */ |
| #define IC (1 << 0) |
| #define ICM (1 << 1) |
| #define ANACK (1 << 2) |
| #define ONACK (1 << 3) |
| #define FLSH_RX (1 << 8) |
| #define FLSH_TX (1 << 9) |
| #define SW_RST (1 << 10) |
| #define KILL_CLOCKS (1 << 11) |
| #define RCV_EN (1 << 16) |
| #define XMT_EN (1 << 17) |
| #define RCVR_11 (1 << 18) |
| #define CWT_EN (1 << 27) |
| #define BWT_EN (1 << 31) |
| |
| /* EMV_SIM_INT_MASK */ |
| #define RDT_IM (1 << 0) |
| #define TC_IM (1 << 1) |
| #define ETC_IM (1 << 3) |
| #define TNACK_IM (1 << 5) |
| #define TDT_IM (1 << 7) |
| #define GPCNT0_IM (1 << 8) |
| #define CWT_ERR_IM (1 << 9) |
| #define RNACK_IM (1 << 10) |
| #define BWT_ERR_IM (1 << 11) |
| #define GPCNT1_IM (1 << 13) |
| #define RX_DATA_IM (1 << 14) |
| |
| /* EMV_SIM_RX_THD */ |
| #define SIM_RCV_THRESHOLD_RDT_MASK (0x0f << 0) |
| #define SIM_RCV_THRESHOLD_RDT(x) ((x & 0x0f) << 0) |
| #define SIM_RCV_THRESHOLD_RTH_MASK (0x0f << 8) |
| #define SIM_RCV_THRESHOLD_RTH(x) ((x & 0x0f) << 8) |
| |
| /* EMV_SIM_TX_THD */ |
| #define SIM_XMT_THRESHOLD_TDT_MASK (0x0f << 0) |
| #define SIM_XMT_THRESHOLD_TDT(x) ((x & 0x0f) << 0) |
| #define SIM_XMT_THRESHOLD_XTH_MASK (0x0f << 8) |
| #define SIM_XMT_THRESHOLD_XTH(x) ((x & 0x0f) << 8) |
| |
| /* EMV_SIM_RX_STATUS */ |
| #define RDTF (1 << 5) |
| #define CWT_ERR (1 << 8) |
| #define RTE (1 << 9) |
| #define BWT_ERR (1 << 10) |
| #define BGT_ERR (1 << 11) |
| #define PEF (1 << 12) |
| #define FEF (1 << 13) |
| |
| /* EMV_SIM_TX_STATUS */ |
| #define TNTE (1 << 0) |
| #define ETCF (1 << 4) |
| #define TCF (1 << 5) |
| #define TDTF (1 << 7) |
| #define GPCNT0_TO (1 << 8) |
| #define GPCNT1_TO (1 << 9) |
| |
| /* EMV_SIM_PCSR */ |
| #define SAPD (1 << 0) |
| #define SVCC_EN (1 << 1) |
| #define VCCENP (1 << 2) |
| #define SRST (1 << 3) |
| #define SCEN (1 << 4) |
| #define SPD (1 << 7) |
| #define SPDIM (1 << 24) |
| #define SPDIF (1 << 25) |
| #define SPDP (1 << 26) |
| #define SPDES (1 << 27) |
| |
| struct emvsim_t { |
| s32 present; |
| u8 open_cnt; |
| int state; |
| struct clk *clk; |
| struct clk *ipg; |
| struct resource *res; |
| void __iomem *ioaddr; |
| int irq; |
| |
| int errval; |
| int protocol_type; |
| sim_timing_t timing_data; |
| sim_baud_t baud_rate; |
| int timeout; |
| u8 nack_threshold; |
| u8 nack_enable; |
| u32 expected_rcv_cnt; |
| u8 is_fixed_len_rec; |
| u32 xmt_remaining; |
| u32 xmt_pos; |
| u32 rcv_count; |
| u8 rcv_buffer[SIM_RCV_BUFFER_SIZE]; |
| u8 xmt_buffer[SIM_XMT_BUFFER_SIZE]; |
| struct completion xfer_done; |
| u16 rcv_head; |
| spinlock_t lock; |
| u32 clk_rate; |
| u8 checking_ts_timing; |
| }; |
| |
| static struct miscdevice emvsim_dev; |
| |
| static void emvsim_data_reset(struct emvsim_t *emvsim) |
| { |
| emvsim->errval = SIM_OK; |
| emvsim->protocol_type = 0; |
| emvsim->timeout = 0; |
| emvsim->nack_threshold = SIM_EMV_NACK_THRESHOLD; |
| emvsim->nack_enable = 0; |
| memset(&emvsim->timing_data, 0, sizeof(emvsim->timing_data)); |
| memset(&emvsim->baud_rate, 0, sizeof(emvsim->baud_rate)); |
| |
| emvsim->xmt_remaining = 0; |
| emvsim->xmt_pos = 0; |
| emvsim->rcv_count = 0; |
| emvsim->rcv_head = 0; |
| memset(emvsim->rcv_buffer, 0, SIM_RCV_BUFFER_SIZE); |
| memset(emvsim->xmt_buffer, 0, SIM_XMT_BUFFER_SIZE); |
| |
| reinit_completion(&emvsim->xfer_done); |
| }; |
| |
| static void emvsim_set_nack(struct emvsim_t *emvsim, u8 enable) |
| { |
| u32 reg_val; |
| |
| reg_val = __raw_readl(emvsim->ioaddr + EMV_SIM_CTRL); |
| /*Disable overrun NACK setting for now*/ |
| reg_val &= ~ONACK; |
| |
| if (enable) { |
| reg_val |= ANACK; |
| __raw_writel(reg_val, emvsim->ioaddr + EMV_SIM_CTRL); |
| |
| reg_val = __raw_readl(emvsim->ioaddr + EMV_SIM_TX_THD); |
| reg_val &= ~(SIM_XMT_THRESHOLD_XTH_MASK); |
| reg_val |= SIM_XMT_THRESHOLD_XTH(emvsim->nack_threshold); |
| __raw_writel(reg_val, emvsim->ioaddr + EMV_SIM_TX_THD); |
| } else { |
| reg_val &= ~ANACK; |
| __raw_writel(reg_val, emvsim->ioaddr + EMV_SIM_CTRL); |
| } |
| |
| emvsim->nack_enable = enable; |
| } |
| |
| static void emvsim_set_tx(struct emvsim_t *emvsim, u8 enable) |
| { |
| u32 reg_data; |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_CTRL); |
| if (enable) { |
| reg_data |= XMT_EN; |
| reg_data &= ~RCV_EN; |
| } else { |
| reg_data &= ~XMT_EN; |
| } |
| |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_CTRL); |
| } |
| |
| static void emvsim_set_rx(struct emvsim_t *emvsim, u8 enable) |
| { |
| u32 reg_data; |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_CTRL); |
| if (enable) { |
| reg_data |= RCV_EN; |
| reg_data &= ~XMT_EN; |
| } else { |
| reg_data &= ~RCV_EN; |
| } |
| |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_CTRL); |
| } |
| |
| static void emvsim_mask_timer0_int(struct emvsim_t *emvsim) |
| { |
| u32 reg_data; |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_INT_MASK); |
| reg_data |= GPCNT0_IM; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_INT_MASK); |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_TX_STATUS); |
| reg_data |= GPCNT0_TO; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_TX_STATUS); |
| } |
| |
| static void emvsim_mask_timer1_int(struct emvsim_t *emvsim) |
| { |
| u32 reg_data; |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_INT_MASK); |
| reg_data |= GPCNT1_IM; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_INT_MASK); |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_TX_STATUS); |
| reg_data |= GPCNT1_TO; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_TX_STATUS); |
| } |
| |
| static void emvsim_start_timer0(struct emvsim_t *emvsim, u8 clk_source) |
| { |
| u32 reg_data; |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_CLKCFG); |
| reg_data &= ~SIM_CNTL_GPCNT0_CLK_SEL_MASK; |
| reg_data |= SIM_CNTL_GPCNT0_CLK_SEL(clk_source); |
| writel(reg_data, emvsim->ioaddr + EMV_SIM_CLKCFG); |
| } |
| |
| static void emvsim_start_timer1(struct emvsim_t *emvsim, u8 clk_source) |
| { |
| u32 reg_data; |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_CLKCFG); |
| reg_data &= ~SIM_CNTL_GPCNT1_CLK_SEL_MASK; |
| reg_data |= SIM_CNTL_GPCNT1_CLK_SEL(clk_source); |
| writel(reg_data, emvsim->ioaddr + EMV_SIM_CLKCFG); |
| } |
| |
| static int emvsim_reset_low_timing(struct emvsim_t *emvsim, u32 clock_cycle) |
| { |
| int errval = 0; |
| int timeout = 0; |
| u32 fclk_in_khz, delay_in_us, reg_data; |
| |
| fclk_in_khz = emvsim->clk_rate / MSEC_PER_SEC; |
| delay_in_us = EMV_RESET_LOW_CYCLES * USEC_PER_MSEC / fclk_in_khz; |
| |
| emvsim_mask_timer0_int(emvsim); |
| __raw_writel(clock_cycle, emvsim->ioaddr + EMV_SIM_GPCNT0_VAL); |
| emvsim_start_timer0(emvsim, SIM_CNTL_GPCNT_CARD_CLK); |
| emvsim_set_tx(emvsim, 1); |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_INT_MASK); |
| reg_data &= ~GPCNT0_IM; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_INT_MASK); |
| |
| timeout = wait_for_completion_timeout( |
| &emvsim->xfer_done, |
| msecs_to_jiffies(delay_in_us / 1000 * 2)); |
| if (timeout == 0) { |
| dev_err(emvsim_dev.parent, "Reset low GPC timout\n"); |
| errval = -SIM_E_TIMEOUT; |
| } |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_INT_MASK); |
| reg_data |= GPCNT0_IM; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_INT_MASK); |
| |
| return errval; |
| } |
| |
| static void emvsim_set_cwt(struct emvsim_t *emvsim, u8 enable) |
| { |
| u32 reg_val; |
| |
| reg_val = __raw_readl(emvsim->ioaddr + EMV_SIM_CTRL); |
| if (enable && emvsim->timing_data.cwt) |
| reg_val |= CWT_EN; |
| else |
| reg_val &= ~CWT_EN; |
| __raw_writel(reg_val, emvsim->ioaddr + EMV_SIM_CTRL); |
| } |
| |
| static void emvsim_set_bwt(struct emvsim_t *emvsim, u8 enable) |
| { |
| u32 reg_val; |
| |
| reg_val = __raw_readl(emvsim->ioaddr + EMV_SIM_CTRL); |
| if (enable && (emvsim->timing_data.bwt || emvsim->timing_data.bgt)) |
| reg_val |= BWT_EN; |
| else |
| reg_val &= ~BWT_EN; |
| __raw_writel(reg_val, emvsim->ioaddr + EMV_SIM_CTRL); |
| } |
| |
| static int emvsim_reset_module(struct emvsim_t *emvsim) |
| { |
| u32 reg_val; |
| |
| reg_val = __raw_readl(emvsim->ioaddr + EMV_SIM_CTRL); |
| reg_val |= SW_RST; |
| __raw_writel(reg_val, emvsim->ioaddr + EMV_SIM_CTRL); |
| |
| /* Software should allow a minimum of 4 Protocol clock cycles(4MHz)*/ |
| usleep_range(1, 3); |
| |
| return 0; |
| } |
| |
| static void emvsim_receive_atr_set(struct emvsim_t *emvsim) |
| { |
| u32 reg_data; |
| |
| emvsim_mask_timer0_int(emvsim); |
| emvsim_mask_timer1_int(emvsim); |
| __raw_writel(ATR_MAX_DELAY_CLK, emvsim->ioaddr + EMV_SIM_GPCNT0_VAL); |
| __raw_writel(0xFFFF, emvsim->ioaddr + EMV_SIM_GPCNT1_VAL); |
| emvsim_start_timer0(emvsim, SIM_CNTL_GPCNT_CARD_CLK); |
| emvsim_start_timer1(emvsim, SIM_CNTL_GPCNT_ETU_CLK); |
| emvsim_set_rx(emvsim, 1); |
| |
| emvsim_set_nack(emvsim, 0); |
| emvsim->errval = 0; |
| emvsim->rcv_count = 0; |
| emvsim->checking_ts_timing = 1; |
| emvsim->state = SIM_STATE_ATR_RECEIVING; |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_INT_MASK); |
| reg_data &= ~(RDT_IM | GPCNT0_IM); |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_INT_MASK); |
| } |
| |
| static int32_t emvsim_check_rec_data(u32 *reg_data) |
| { |
| s32 err = 0; |
| |
| if (*reg_data & CWT_ERR) |
| err |= SIM_ERROR_CWT; |
| |
| if (*reg_data & FEF) |
| err |= SIM_ERROR_FRAME; |
| |
| if (*reg_data & PEF) |
| err |= SIM_ERROR_PARITY; |
| |
| return err; |
| } |
| |
| static void emvsim_xmt_fill_fifo(struct emvsim_t *emvsim) |
| { |
| u32 reg_data; |
| u32 bytesleft, i; |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_TX_STATUS); |
| bytesleft = SIM_TX_FIFO_DEPTH - ((reg_data >> 24) & 0x1F); |
| |
| if (bytesleft > emvsim->xmt_remaining) |
| bytesleft = emvsim->xmt_remaining; |
| |
| for (i = 0; i < bytesleft; i++) { |
| __raw_writel(emvsim->xmt_buffer[emvsim->xmt_pos], |
| emvsim->ioaddr + EMV_SIM_TX_BUF); |
| emvsim->xmt_pos++; |
| }; |
| emvsim->xmt_remaining -= bytesleft; |
| }; |
| |
| static void emvsim_rcv_read_fifo(struct emvsim_t *emvsim) |
| { |
| u16 i, count; |
| u32 reg_data; |
| u8 data; |
| |
| count = __raw_readl(emvsim->ioaddr + EMV_SIM_RX_STATUS) >> 24; |
| |
| spin_lock(&emvsim->lock); |
| for (i = 0; i < count; i++) { |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_RX_STATUS); |
| emvsim->errval |= emvsim_check_rec_data(®_data); |
| |
| /* T1 mode and t0 mode no parity error, T1 mode SIM module |
| * will not produce NACK be NACK is disabled. T0 mode to |
| * ensure there is no parity error for the current byte |
| */ |
| if (!(emvsim->nack_enable && (reg_data & PEF))) { |
| data = __raw_readb(emvsim->ioaddr + EMV_SIM_RX_BUF); |
| emvsim->rcv_buffer[emvsim->rcv_head + emvsim->rcv_count] = data; |
| emvsim->rcv_count++; |
| } |
| |
| if (emvsim->rcv_head + emvsim->rcv_count >= |
| SIM_RCV_BUFFER_SIZE) { |
| dev_err(emvsim_dev.parent, |
| "The software fifo is full,head %d, cnt%d\n", |
| emvsim->rcv_head, emvsim->rcv_count); |
| break; |
| } |
| } |
| spin_unlock(&emvsim->lock); |
| } |
| |
| static void emvsim_tx_irq_enable(struct emvsim_t *emvsim) |
| { |
| u32 reg_val; |
| |
| /*Clear the TX&RX status, W1C */ |
| reg_val = __raw_readl(emvsim->ioaddr + EMV_SIM_TX_STATUS); |
| __raw_writel(reg_val, emvsim->ioaddr + EMV_SIM_TX_STATUS); |
| reg_val = __raw_readl(emvsim->ioaddr + EMV_SIM_RX_STATUS); |
| __raw_writel(reg_val, emvsim->ioaddr + EMV_SIM_RX_STATUS); |
| |
| reg_val = __raw_readl(emvsim->ioaddr + EMV_SIM_INT_MASK); |
| reg_val |= CWT_ERR_IM | BWT_ERR_IM | RX_DATA_IM | RDT_IM; |
| |
| if (emvsim->xmt_remaining != 0) { |
| reg_val &= ~TDT_IM; |
| } else { |
| reg_val &= ~TC_IM; |
| reg_val &= ~ETC_IM; |
| } |
| |
| /* NACK interrupt is enabled only when T0 mode*/ |
| if (emvsim->protocol_type == SIM_PROTOCOL_T0 || |
| emvsim->nack_enable != 0) |
| reg_val &= ~TNACK_IM; |
| else |
| reg_val |= TNACK_IM; |
| |
| __raw_writel(reg_val, emvsim->ioaddr + EMV_SIM_INT_MASK); |
| } |
| |
| static void emvsim_tx_irq_disable(struct emvsim_t *emvsim) |
| { |
| u32 reg_val; |
| |
| reg_val = __raw_readl(emvsim->ioaddr + EMV_SIM_INT_MASK); |
| reg_val |= (TDT_IM | TC_IM | TNACK_IM | ETC_IM); |
| __raw_writel(reg_val, emvsim->ioaddr + EMV_SIM_INT_MASK); |
| } |
| |
| static void emvsim_rx_irq_enable(struct emvsim_t *emvsim) |
| { |
| u32 reg_data; |
| |
| /* Ensure the CWT timer is enabled */ |
| emvsim_set_cwt(emvsim, 1); |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_INT_MASK); |
| reg_data |= (TC_IM | TDT_IM | TNACK_IM); |
| reg_data &= ~(RDT_IM | CWT_ERR_IM | BWT_ERR_IM); |
| |
| if (emvsim->protocol_type == SIM_PROTOCOL_T0 || |
| emvsim->nack_enable != 0) |
| reg_data &= ~RNACK_IM; |
| else |
| reg_data |= RNACK_IM; |
| |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_INT_MASK); |
| } |
| |
| static void emvsim_rx_irq_disable(struct emvsim_t *emvsim) |
| { |
| u32 reg_val; |
| |
| reg_val = __raw_readl(emvsim->ioaddr + EMV_SIM_INT_MASK); |
| reg_val |= (RDT_IM | CWT_ERR_IM | BWT_ERR_IM | RNACK_IM); |
| __raw_writel(reg_val, emvsim->ioaddr + EMV_SIM_INT_MASK); |
| } |
| |
| static irqreturn_t emvsim_irq_handler(int irq, void *dev_id) |
| { |
| u32 reg_data, tx_status, rx_status; |
| struct emvsim_t *emvsim = (struct emvsim_t *)dev_id; |
| |
| /* clear TX/RX interrupt status, W1C*/ |
| tx_status = __raw_readl(emvsim->ioaddr + EMV_SIM_TX_STATUS); |
| rx_status = __raw_readl(emvsim->ioaddr + EMV_SIM_RX_STATUS); |
| __raw_writel(tx_status, emvsim->ioaddr + EMV_SIM_TX_STATUS); |
| __raw_writel(rx_status, emvsim->ioaddr + EMV_SIM_RX_STATUS); |
| |
| if (emvsim->state == SIM_STATE_ATR_RECEIVING && |
| emvsim->checking_ts_timing == 1) { |
| if ((tx_status & GPCNT0_TO) && !(rx_status & RDTF)) { |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_CTRL); |
| reg_data &= ~CWT_EN; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_CTRL); |
| |
| reg_data = __raw_readl(emvsim->ioaddr + |
| EMV_SIM_INT_MASK); |
| reg_data |= (GPCNT0_IM | CWT_ERR_IM | RDT_IM); |
| __raw_writel(reg_data, |
| emvsim->ioaddr + EMV_SIM_INT_MASK); |
| |
| emvsim->errval = SIM_ERROR_ATR_DELAY; |
| complete(&emvsim->xfer_done); |
| emvsim->checking_ts_timing = 0; |
| } else if (rx_status & RDTF) { |
| u8 rdt = SIM_RX_FIFO_DEPTH >> 1; |
| |
| emvsim_mask_timer0_int(emvsim); |
| emvsim_rcv_read_fifo(emvsim); |
| |
| /* ATR each received byte will cost 12 ETU */ |
| reg_data = ATR_MAX_DURATION - emvsim->rcv_count * 12; |
| __raw_writel(reg_data, |
| emvsim->ioaddr + EMV_SIM_GPCNT1_VAL); |
| |
| reg_data = __raw_readl(emvsim->ioaddr + |
| EMV_SIM_INT_MASK); |
| reg_data &= ~(GPCNT1_IM | CWT_ERR_IM | RDT_IM); |
| __raw_writel(reg_data, |
| emvsim->ioaddr + EMV_SIM_INT_MASK); |
| |
| reg_data = SIM_RCV_THRESHOLD_RTH(0) | |
| SIM_RCV_THRESHOLD_RDT(rdt); |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_RX_THD); |
| |
| /* ATR has arrived as EMV demands */ |
| emvsim->checking_ts_timing = 0; |
| } else { |
| dev_err(emvsim_dev.parent, |
| "Unexpected irq when delay checking\n"); |
| } |
| } |
| |
| else if (emvsim->state == SIM_STATE_ATR_RECEIVING) { |
| /*CWT ERROR OR ATR_MAX_DURATION TIMEOUT */ |
| if ((rx_status & CWT_ERR) || |
| ((tx_status & GPCNT1_TO) && (emvsim->rcv_count != 0))) { |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_CTRL); |
| reg_data &= ~CWT_EN; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_CTRL); |
| |
| reg_data = __raw_readl(emvsim->ioaddr + |
| EMV_SIM_INT_MASK); |
| reg_data |= (GPCNT1_IM | CWT_ERR_IM | RDT_IM); |
| __raw_writel(reg_data, |
| emvsim->ioaddr + EMV_SIM_INT_MASK); |
| |
| if (tx_status & GPCNT1_TO) |
| emvsim->errval |= SIM_ERROR_ATR_TIMEROUT; |
| |
| if (rx_status & CWT_ERR) |
| emvsim->errval |= SIM_ERROR_CWT; |
| |
| emvsim_rcv_read_fifo(emvsim); |
| emvsim->state = SIM_STATE_ATR_RECEIVED; |
| |
| complete(&emvsim->xfer_done); |
| } else if (rx_status & RDTF) { |
| /* Receive Data Threshold Interrupt */ |
| emvsim_rcv_read_fifo(emvsim); |
| } |
| } |
| |
| else if (emvsim->state == SIM_STATE_XMTING) { |
| /* need to enable CWT timer */ |
| if (tx_status & ETCF) |
| emvsim_set_cwt(emvsim, 1); |
| |
| if (tx_status & TNTE) { |
| emvsim_set_tx(emvsim, 0); |
| |
| /*Disalbe the timers*/ |
| emvsim_set_cwt(emvsim, 0); |
| emvsim_set_bwt(emvsim, 0); |
| |
| /*Disable the NACK interruptand TX related interrupt*/ |
| emvsim_tx_irq_disable(emvsim); |
| |
| /*Update the state and status*/ |
| emvsim->errval |= SIM_ERROR_NACK_THRESHOLD; |
| emvsim->state = SIM_STATE_XMT_ERROR; |
| |
| complete(&emvsim->xfer_done); |
| } else if (tx_status & TDTF && emvsim->xmt_remaining != 0) { |
| emvsim_xmt_fill_fifo(emvsim); |
| if (emvsim->xmt_remaining == 0) { |
| reg_data = __raw_readl(emvsim->ioaddr + |
| EMV_SIM_INT_MASK); |
| reg_data |= TDT_IM; |
| reg_data &= ~(TC_IM | ETC_IM); |
| __raw_writel(reg_data, emvsim->ioaddr + |
| EMV_SIM_INT_MASK); |
| } |
| } else if ((tx_status & TCF) && !emvsim->xmt_remaining) { |
| emvsim_tx_irq_disable(emvsim); |
| emvsim_set_rx(emvsim, 1); |
| emvsim->state = SIM_STATE_XMT_DONE; |
| complete(&emvsim->xfer_done); |
| } |
| } |
| |
| /* |
| * It takes some time to change from SIM_STATE_XMT_DONE to |
| * SIM_STATE_RECEIVING RX would only be enabled after state |
| * becomes SIM_STATE_RECEIVING |
| */ |
| else if (emvsim->state == SIM_STATE_RECEIVING) { |
| if (rx_status & RTE) { |
| emvsim_set_rx(emvsim, 0); |
| |
| /* Disable the BWT timer and CWT timer right now */ |
| emvsim_set_cwt(emvsim, 0); |
| emvsim_set_bwt(emvsim, 0); |
| |
| /* Disable the interrupt right now */ |
| emvsim_rx_irq_disable(emvsim); |
| |
| /* Should we read the fifo or just flush the fifo? */ |
| emvsim_rcv_read_fifo(emvsim); |
| emvsim->errval = SIM_ERROR_NACK_THRESHOLD; |
| emvsim->state = SIM_STATE_RECEIVE_ERROR; |
| complete(&emvsim->xfer_done); |
| } |
| |
| if (rx_status & RDTF) { |
| emvsim_rcv_read_fifo(emvsim); |
| if (emvsim->is_fixed_len_rec && |
| emvsim->rcv_count >= emvsim->expected_rcv_cnt) { |
| emvsim_rx_irq_disable(emvsim); |
| |
| if (emvsim->state == SIM_STATE_RECEIVING) { |
| emvsim->state = SIM_STATE_RECEIVE_DONE; |
| complete(&emvsim->xfer_done); |
| } |
| } |
| } |
| |
| if (rx_status & (CWT_ERR | BWT_ERR | BGT_ERR)) { |
| emvsim_set_cwt(emvsim, 0); |
| emvsim_set_bwt(emvsim, 0); |
| emvsim_rx_irq_disable(emvsim); |
| |
| if (rx_status & BWT_ERR) |
| emvsim->errval |= SIM_ERROR_BWT; |
| if (rx_status & CWT_ERR) |
| emvsim->errval |= SIM_ERROR_CWT; |
| if (rx_status & BGT_ERR) |
| emvsim->errval |= SIM_ERROR_BGT; |
| |
| emvsim_rcv_read_fifo(emvsim); |
| |
| if (emvsim->state == SIM_STATE_RECEIVING) { |
| emvsim->state = SIM_STATE_RECEIVE_DONE; |
| complete(&emvsim->xfer_done); |
| } |
| } |
| } |
| |
| else if ((emvsim->state == SIM_STATE_RESET_SEQUENCY) && |
| (tx_status & GPCNT0_TO)) { |
| complete(&emvsim->xfer_done); |
| emvsim_mask_timer0_int(emvsim); |
| } else if (rx_status & RDTF) { |
| dev_err(emvsim_dev.parent, |
| "unexpected status %d\n", emvsim->state); |
| emvsim_rcv_read_fifo(emvsim); |
| } |
| |
| return IRQ_HANDLED; |
| }; |
| |
| static void emvsim_start(struct emvsim_t *emvsim) |
| { |
| u32 reg_data, clk_rate, clk_div = 0; |
| |
| clk_rate = clk_get_rate(emvsim->clk); |
| clk_div = (clk_rate + emvsim->clk_rate - 1) / emvsim->clk_rate; |
| __raw_writel(clk_div, emvsim->ioaddr + EMV_SIM_CLKCFG); |
| |
| usleep_range(90, 100); |
| /* SPDP=0: SIM Presence Detect pin is low, default PRESENT status */ |
| if (__raw_readl(emvsim->ioaddr + EMV_SIM_PCSR) & SPDP) { |
| emvsim->present = SIM_PRESENT_REMOVED; |
| emvsim->state = SIM_STATE_REMOVED; |
| } else { |
| emvsim->present = SIM_PRESENT_DETECTED; |
| emvsim->state = SIM_STATE_DETECTED; |
| }; |
| |
| /* disabled card interrupt. clear interrupt status*/ |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_PCSR); |
| reg_data |= SPDIM | SPDIF; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_PCSR); |
| }; |
| |
| static void emvsim_cold_reset_sequency(struct emvsim_t *emvsim) |
| { |
| u32 reg_data; |
| |
| emvsim->state = SIM_STATE_RESET_SEQUENCY; |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_PCSR); |
| reg_data &= ~VCCENP; |
| reg_data |= SVCC_EN; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_PCSR); |
| |
| msleep(20); |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_PCSR); |
| reg_data |= SCEN; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_PCSR); |
| |
| emvsim_reset_low_timing(emvsim, EMV_RESET_LOW_CYCLES); |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_PCSR); |
| reg_data |= SRST; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_PCSR); |
| }; |
| |
| static void emvsim_deactivate(struct emvsim_t *emvsim) |
| { |
| u32 reg_data; |
| |
| /* Auto powdown to implement the deactivate sequence */ |
| if (emvsim->present != SIM_PRESENT_REMOVED) { |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_PCSR); |
| reg_data |= SAPD | SPD; |
| writel(reg_data, emvsim->ioaddr + EMV_SIM_PCSR); |
| } else { |
| dev_err(emvsim_dev.parent, ">>>No card%s\n", __func__); |
| } |
| }; |
| |
| static void emvsim_cold_reset(struct emvsim_t *emvsim) |
| { |
| if (emvsim->present != SIM_PRESENT_REMOVED) { |
| emvsim->state = SIM_STATE_DETECTED; |
| emvsim->present = SIM_PRESENT_DETECTED; |
| emvsim_cold_reset_sequency(emvsim); |
| emvsim_receive_atr_set(emvsim); |
| } else { |
| dev_err(emvsim_dev.parent, "No card%s\n", __func__); |
| } |
| }; |
| |
| static void emvsim_warm_reset_sequency(struct emvsim_t *emvsim) |
| { |
| u32 reg_data; |
| |
| /*enable power/clk, deassert rst*/ |
| emvsim->state = SIM_STATE_RESET_SEQUENCY; |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_PCSR); |
| reg_data |= (SRST | SCEN); |
| reg_data &= ~VCCENP; |
| reg_data |= SVCC_EN; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_PCSR); |
| |
| usleep_range(20, 25); |
| |
| /* assert rst */ |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_PCSR); |
| reg_data &= ~SRST; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_PCSR); |
| |
| /* rst keep low */ |
| emvsim_reset_low_timing(emvsim, EMV_RESET_LOW_CYCLES); |
| |
| /* deassert rst */ |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_PCSR); |
| reg_data |= SRST; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_PCSR); |
| } |
| |
| static void emvsim_warm_reset(struct emvsim_t *emvsim) |
| { |
| if (emvsim->present != SIM_PRESENT_REMOVED) { |
| emvsim_data_reset(emvsim); |
| emvsim_warm_reset_sequency(emvsim); |
| emvsim_receive_atr_set(emvsim); |
| } else { |
| dev_err(emvsim_dev.parent, "No card%s\n", __func__); |
| } |
| }; |
| |
| static int emvsim_card_lock(struct emvsim_t *emvsim) |
| { |
| int errval; |
| |
| /* place holder for true physcial locking */ |
| if (emvsim->present != SIM_PRESENT_REMOVED) |
| errval = SIM_OK; |
| else |
| errval = -SIM_E_NOCARD; |
| |
| return errval; |
| }; |
| |
| static int emvsim_card_eject(struct emvsim_t *emvsim) |
| { |
| int errval; |
| |
| /* place holder for true physcial locking */ |
| if (emvsim->present != SIM_PRESENT_REMOVED) |
| errval = SIM_OK; |
| else |
| errval = -SIM_E_NOCARD; |
| |
| return errval; |
| }; |
| |
| static int emvsim_check_baud_rate(sim_baud_t *baud_rate) |
| { |
| /* The valid value is decribed in the 8.3.3.1 in EMV 4.3 */ |
| if (baud_rate->fi == 1 && (baud_rate->di == 1 || |
| baud_rate->di == 2 || baud_rate->di == 3)) |
| return 0; |
| |
| return -EINVAL; |
| } |
| |
| static int emvsim_set_baud_rate(struct emvsim_t *emvsim) |
| { |
| u32 reg_data; |
| |
| switch (emvsim->baud_rate.di) { |
| case 1: |
| reg_data = 372; |
| break; |
| case 2: |
| reg_data = 372 >> 1; |
| break; |
| case 3: |
| reg_data = 372 >> 2; |
| break; |
| default: |
| dev_err(emvsim_dev.parent, |
| "Invalid baud Di, Using default 372 / 1\n"); |
| reg_data = 372; |
| break; |
| } |
| |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_DIVISOR); |
| |
| return 0; |
| } |
| |
| static int emvsim_check_timing_data(sim_timing_t *timing_data) |
| { |
| if (timing_data->wwt > 0xFFFF || timing_data->cwt > 0xFFFF || |
| timing_data->bgt > 0xFFFF || timing_data->cgt > 0xFF) { |
| dev_err(emvsim_dev.parent, |
| "The timing value is out of scope of IP\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void emvsim_set_timer_counter(struct emvsim_t *emvsim) |
| { |
| u32 reg; |
| |
| if (emvsim->timing_data.wwt != 0 && |
| emvsim->protocol_type == SIM_PROTOCOL_T0) { |
| emvsim->timing_data.cwt = emvsim->timing_data.wwt; |
| emvsim->timing_data.bwt = emvsim->timing_data.wwt; |
| } |
| |
| if (emvsim->timing_data.bgt != 0) |
| __raw_writel(emvsim->timing_data.bgt, |
| emvsim->ioaddr + EMV_SIM_BGT_VAL); |
| |
| if (emvsim->timing_data.cwt != 0) |
| __raw_writel(emvsim->timing_data.cwt, |
| emvsim->ioaddr + EMV_SIM_CWT_VAL); |
| |
| if (emvsim->timing_data.bwt != 0) |
| __raw_writel(emvsim->timing_data.bwt, |
| emvsim->ioaddr + EMV_SIM_BWT_VAL); |
| |
| /* 11 etu and 12 etu, T0: 12ETU; T1: 11ETU */ |
| if (emvsim->protocol_type == SIM_PROTOCOL_T0) { |
| /* |
| * From EMV4.3 , T0 mode means 12 ETU. TotalETU=12+CGT. |
| * If cgt equals 0xFF, TotalETU = 12 |
| */ |
| reg = __raw_readl(emvsim->ioaddr + EMV_SIM_CTRL); |
| reg &= ~RCVR_11; |
| __raw_writel(reg, emvsim->ioaddr + EMV_SIM_CTRL); |
| |
| /* set Transmitter Guard Time Value in ETU */ |
| if (emvsim->timing_data.cgt == 0xFF) |
| __raw_writel(0, emvsim->ioaddr + EMV_SIM_TX_GETU); |
| else |
| __raw_writel(emvsim->timing_data.cgt, |
| emvsim->ioaddr + EMV_SIM_TX_GETU); |
| } else if (emvsim->protocol_type == SIM_PROTOCOL_T1) { |
| /* From EMV4.3 , T1 mode means 11 ETU. TotalETU=11+CGT */ |
| reg = __raw_readl(emvsim->ioaddr + EMV_SIM_CTRL); |
| reg |= RCVR_11; |
| __raw_writel(reg, emvsim->ioaddr + EMV_SIM_CTRL); |
| __raw_writel(emvsim->timing_data.cgt, |
| emvsim->ioaddr + EMV_SIM_TX_GETU); |
| } |
| } |
| |
| static int emvsim_xmt_start(struct emvsim_t *emvsim) |
| { |
| u32 reg_val; |
| |
| emvsim->state = SIM_STATE_XMTING; |
| |
| emvsim_set_baud_rate(emvsim); |
| if (emvsim->protocol_type == SIM_PROTOCOL_T0) { |
| emvsim_set_nack(emvsim, 1); |
| } else if (emvsim->protocol_type == SIM_PROTOCOL_T1) { |
| emvsim_set_nack(emvsim, 0); |
| } else { |
| dev_err(emvsim_dev.parent, "Invalid protocol not T0 or T1\n"); |
| return -EINVAL; |
| } |
| |
| emvsim_set_timer_counter(emvsim); |
| |
| if (emvsim->xmt_remaining != 0) { |
| reg_val = __raw_readl(emvsim->ioaddr + EMV_SIM_TX_THD); |
| reg_val &= ~SIM_XMT_THRESHOLD_TDT_MASK; |
| reg_val |= SIM_XMT_THRESHOLD_TDT(TX_FIFO_THRESHOLD); |
| __raw_writel(reg_val, emvsim->ioaddr + EMV_SIM_TX_THD); |
| } |
| |
| emvsim_set_bwt(emvsim, 1); |
| emvsim_set_cwt(emvsim, 0); |
| |
| emvsim_set_tx(emvsim, 1); |
| emvsim_xmt_fill_fifo(emvsim); |
| emvsim_tx_irq_enable(emvsim); |
| |
| return 0; |
| } |
| |
| static void emvsim_flush_fifo(struct emvsim_t *emvsim, u8 flush_tx, u8 flush_rx) |
| { |
| u32 reg_val; |
| |
| reg_val = __raw_readl(emvsim->ioaddr + EMV_SIM_CTRL); |
| |
| if (flush_tx) |
| reg_val |= FLSH_TX; |
| if (flush_rx) |
| reg_val |= FLSH_RX; |
| __raw_writel(reg_val, emvsim->ioaddr + EMV_SIM_CTRL); |
| } |
| |
| static void emvsim_change_rcv_threshold(struct emvsim_t *emvsim) |
| { |
| u32 rx_threshold = 0; |
| u32 reg_val = 0; |
| |
| if (emvsim->is_fixed_len_rec) { |
| rx_threshold = emvsim->expected_rcv_cnt - emvsim->rcv_count; |
| if (rx_threshold > (SIM_RX_FIFO_DEPTH >> 1)) |
| rx_threshold = (SIM_RX_FIFO_DEPTH >> 1); |
| reg_val = __raw_readl(emvsim->ioaddr + EMV_SIM_RX_THD); |
| reg_val &= ~(SIM_RCV_THRESHOLD_RDT_MASK); |
| reg_val |= SIM_RCV_THRESHOLD_RDT(rx_threshold); |
| __raw_writel(reg_val, emvsim->ioaddr + EMV_SIM_RX_THD); |
| } |
| } |
| |
| static void emvsim_start_rcv(struct emvsim_t *emvsim) |
| { |
| int rdt = 1; |
| |
| emvsim->state = SIM_STATE_RECEIVING; |
| |
| emvsim_set_rx(emvsim, 1); |
| emvsim_set_baud_rate(emvsim); |
| emvsim_set_timer_counter(emvsim); |
| emvsim_set_cwt(emvsim, 1); |
| emvsim_set_bwt(emvsim, 1); |
| |
| if (emvsim->protocol_type == SIM_PROTOCOL_T0) |
| emvsim_set_nack(emvsim, 1); |
| else if (emvsim->protocol_type == SIM_PROTOCOL_T1) |
| emvsim_set_nack(emvsim, 0); |
| |
| /*Set RX threshold*/ |
| if (emvsim->protocol_type == SIM_PROTOCOL_T0) |
| __raw_writel(SIM_RCV_THRESHOLD_RTH(emvsim->nack_threshold) | |
| SIM_RCV_THRESHOLD_RDT(rdt), |
| emvsim->ioaddr + EMV_SIM_RX_THD); |
| else |
| __raw_writel(SIM_RCV_THRESHOLD_RDT(rdt), |
| emvsim->ioaddr + EMV_SIM_RX_THD); |
| |
| /*Clear status and enable interrupt*/ |
| emvsim_rx_irq_enable(emvsim); |
| } |
| |
| static void emvsim_polling_delay(struct emvsim_t *emvsim, u32 delay) |
| { |
| u32 reg_data; |
| unsigned long orig_jiffies = jiffies; |
| |
| emvsim_mask_timer1_int(emvsim); |
| |
| __raw_writel(delay, emvsim->ioaddr + EMV_SIM_GPCNT0_VAL); |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_INT_MASK); |
| reg_data &= ~GPCNT1_IM; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_INT_MASK); |
| |
| /* Loop for timeout, add timeout mechanism to avoid dead loop */ |
| while (!(__raw_readl(emvsim->ioaddr + EMV_SIM_TX_STATUS) & GPCNT0_TO)) { |
| if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) { |
| dev_err(emvsim_dev.parent, "polling delay timeout\n"); |
| break; |
| } |
| |
| usleep_range(10, 20); |
| } |
| |
| emvsim_mask_timer1_int(emvsim); |
| } |
| |
| void emvsim_clear_rx_buf(struct emvsim_t *emvsim) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < SIM_RCV_BUFFER_SIZE; i++) |
| emvsim->rcv_buffer[i] = 0; |
| emvsim->rcv_count = 0; |
| emvsim->rcv_head = 0; |
| } |
| |
| static long emvsim_ioctl(struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| int ret, errval = SIM_OK; |
| unsigned long timeout; |
| u32 reg_data; |
| u32 delay; |
| u32 copy_cnt, val; |
| unsigned long flags; |
| unsigned char __user *atr_buffer; |
| unsigned char __user *xmt_buffer; |
| unsigned char __user *rcv_buffer; |
| |
| struct emvsim_t *emvsim = (struct emvsim_t *)file->private_data; |
| |
| switch (cmd) { |
| case SIM_IOCTL_GET_ATR: |
| if (emvsim->present != SIM_PRESENT_DETECTED) { |
| dev_err(emvsim_dev.parent, "NO card ...\n"); |
| errval = -SIM_E_NOCARD; |
| break; |
| } |
| |
| emvsim->timeout = ATR_TIMEOUT * HZ; |
| val = 0; |
| ret = copy_to_user(&(((sim_atr_t *)arg)->size), &val, |
| sizeof((((sim_atr_t *)arg)->size))); |
| |
| timeout = wait_for_completion_interruptible_timeout( |
| &emvsim->xfer_done, emvsim->timeout); |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_CTRL); |
| reg_data &= ~CWT_EN; |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_CTRL); |
| |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_INT_MASK); |
| reg_data |= (GPCNT0_IM | CWT_ERR_IM); |
| __raw_writel(reg_data, emvsim->ioaddr + EMV_SIM_INT_MASK); |
| |
| if (timeout == 0) { |
| dev_err(emvsim_dev.parent, "ATR timeout\n"); |
| errval = -SIM_E_TIMEOUT; |
| break; |
| } |
| |
| ret = copy_to_user(&(((sim_atr_t *)arg)->size), |
| &emvsim->rcv_count, |
| sizeof(emvsim->rcv_count)); |
| if (ret) { |
| dev_err(emvsim_dev.parent, |
| "ATR ACCESS rcv_count Error, %d\n", ret); |
| errval = -SIM_E_ACCESS; |
| break; |
| } |
| |
| __get_user(atr_buffer, &((sim_atr_t __user *)arg)->atr_buffer); |
| ret = copy_to_user(atr_buffer, |
| emvsim->rcv_buffer, emvsim->rcv_count); |
| if (ret) { |
| dev_err(emvsim_dev.parent, |
| "ATR ACCESS buffer Error %d %d\n", |
| emvsim->rcv_count, ret); |
| errval = -SIM_E_ACCESS; |
| break; |
| } |
| |
| ret = copy_to_user(&(((sim_atr_t *)arg)->errval), |
| &emvsim->errval, sizeof(emvsim->errval)); |
| if (ret) { |
| dev_err(emvsim_dev.parent, "ATR ACCESS Error\n"); |
| errval = -SIM_E_ACCESS; |
| break; |
| } |
| emvsim->rcv_count = 0; |
| emvsim->rcv_head = 0; |
| emvsim->errval = 0; |
| |
| break; |
| |
| case SIM_IOCTL_DEACTIVATE: |
| emvsim_deactivate(emvsim); |
| break; |
| |
| case SIM_IOCTL_COLD_RESET: |
| emvsim->present = SIM_PRESENT_REMOVED; |
| emvsim->state = SIM_STATE_REMOVED; |
| emvsim_reset_module(emvsim); |
| emvsim_data_reset(emvsim); |
| emvsim_start(emvsim); |
| emvsim_cold_reset(emvsim); |
| break; |
| |
| case SIM_IOCTL_WARM_RESET: |
| emvsim_warm_reset(emvsim); |
| break; |
| |
| case SIM_IOCTL_XMT: |
| ret = copy_from_user(&emvsim->xmt_remaining, |
| &(((sim_xmt_t *)arg)->xmt_length), |
| sizeof(uint32_t)); |
| if (ret || emvsim->xmt_remaining > SIM_XMT_BUFFER_SIZE) { |
| dev_err(emvsim_dev.parent, |
| "copy error or to big buffer\n"); |
| errval = -EINVAL; |
| break; |
| } |
| |
| __get_user(xmt_buffer, &((sim_xmt_t *)arg)->xmt_buffer); |
| ret = copy_from_user(emvsim->xmt_buffer, xmt_buffer, |
| emvsim->xmt_remaining); |
| if (ret) { |
| dev_err(emvsim_dev.parent, "Copy Error\n"); |
| errval = ret; |
| break; |
| } |
| |
| emvsim_clear_rx_buf(emvsim); |
| emvsim_set_cwt(emvsim, 0); |
| emvsim_set_bwt(emvsim, 0); |
| /*Flush the tx rx fifo*/ |
| emvsim_flush_fifo(emvsim, 1, 1); |
| emvsim->xmt_pos = 0; |
| emvsim->errval = 0; |
| |
| errval = emvsim_xmt_start(emvsim); |
| if (errval) |
| break; |
| |
| emvsim->timeout = TX_TIMEOUT * HZ; |
| timeout = wait_for_completion_interruptible_timeout( |
| &emvsim->xfer_done, emvsim->timeout); |
| if (timeout == 0) { |
| /*Disable the NACK interruptand TX related interrupt*/ |
| emvsim_tx_irq_disable(emvsim); |
| dev_err(emvsim_dev.parent, "tx timeout\n"); |
| } |
| |
| if (timeout == 0 || emvsim->state == SIM_STATE_XMT_ERROR) { |
| dev_err(emvsim_dev.parent, "TX error\n"); |
| /*Disable timers*/ |
| emvsim_set_cwt(emvsim, 0); |
| emvsim_set_bwt(emvsim, 0); |
| /*Disable TX*/ |
| emvsim_set_tx(emvsim, 0); |
| /*Flush the tx fifos*/ |
| emvsim_flush_fifo(emvsim, 1, 0); |
| if (timeout == 0) |
| errval = -SIM_E_TIMEOUT; |
| else |
| errval = -SIM_E_NACK; |
| |
| ret = copy_to_user(&(((sim_atr_t *)arg)->errval), |
| &emvsim->errval, |
| sizeof(emvsim->errval)); |
| emvsim->errval = 0; |
| break; |
| } |
| |
| /*Copy the error status to user space*/ |
| ret = copy_to_user(&(((sim_atr_t *)arg)->errval), |
| &emvsim->errval, sizeof(emvsim->errval)); |
| emvsim->errval = 0; |
| |
| emvsim_start_rcv(emvsim); |
| |
| break; |
| |
| case SIM_IOCTL_RCV: |
| if (emvsim->present != SIM_PRESENT_DETECTED) { |
| errval = -SIM_E_NOCARD; |
| break; |
| } |
| |
| val = 0; |
| emvsim->is_fixed_len_rec = 0; |
| ret = copy_from_user(&emvsim->expected_rcv_cnt, |
| &(((sim_rcv_t *)arg)->rcv_length), |
| sizeof(emvsim->expected_rcv_cnt)); |
| |
| /*Set the length to be 0 at first*/ |
| ret = copy_to_user(&(((sim_rcv_t *)arg)->rcv_length), &val, |
| sizeof(val)); |
| |
| /*Set error value to be 0 at first*/ |
| ret = copy_to_user(&(((sim_rcv_t *)arg)->errval), &val, |
| sizeof(val)); |
| |
| if (emvsim->expected_rcv_cnt != 0) |
| emvsim->is_fixed_len_rec = 1; |
| |
| if (emvsim->is_fixed_len_rec && |
| emvsim->rcv_count >= emvsim->expected_rcv_cnt) |
| goto copy_data; |
| |
| if (emvsim->state != SIM_STATE_RECEIVING) |
| emvsim_start_rcv(emvsim); |
| |
| spin_lock_irqsave(&emvsim->lock, flags); |
| if (emvsim->is_fixed_len_rec && |
| emvsim->rcv_count < emvsim->expected_rcv_cnt) |
| emvsim_change_rcv_threshold(emvsim); |
| spin_unlock_irqrestore(&emvsim->lock, flags); |
| emvsim->timeout = RX_TIMEOUT * HZ; |
| timeout = wait_for_completion_interruptible_timeout( |
| &emvsim->xfer_done, emvsim->timeout); |
| if (timeout == 0) { |
| dev_err(emvsim_dev.parent, "Receiving timeout\n"); |
| emvsim_set_cwt(emvsim, 0); |
| emvsim_set_bwt(emvsim, 0); |
| emvsim_rx_irq_disable(emvsim); |
| errval = -SIM_E_TIMEOUT; |
| break; |
| } |
| copy_data: |
| if (emvsim->is_fixed_len_rec) |
| copy_cnt = emvsim->rcv_count > emvsim->expected_rcv_cnt |
| ? emvsim->expected_rcv_cnt |
| : emvsim->rcv_count; |
| else |
| copy_cnt = emvsim->rcv_count; |
| |
| ret = copy_to_user(&(((sim_rcv_t *)arg)->rcv_length), |
| ©_cnt, sizeof(copy_cnt)); |
| if (ret) { |
| dev_err(emvsim_dev.parent, "ATR ACCESS Error\n"); |
| errval = -SIM_E_ACCESS; |
| break; |
| } |
| |
| __get_user(rcv_buffer, &((sim_rcv_t *)arg)->rcv_buffer); |
| ret = copy_to_user(rcv_buffer, |
| &emvsim->rcv_buffer[emvsim->rcv_head], |
| copy_cnt); |
| if (ret) { |
| dev_err(emvsim_dev.parent, "ATR ACCESS Error\n"); |
| errval = -SIM_E_ACCESS; |
| break; |
| } |
| |
| ret = copy_to_user(&(((sim_rcv_t *)arg)->errval), |
| &emvsim->errval, sizeof(emvsim->errval)); |
| if (ret) { |
| dev_err(emvsim_dev.parent, "ATR ACCESS Error\n"); |
| errval = -SIM_E_ACCESS; |
| break; |
| } |
| /*Reset the receiving count and errval*/ |
| spin_lock_irqsave(&emvsim->lock, flags); |
| emvsim->rcv_head += copy_cnt; |
| emvsim->rcv_count -= copy_cnt; |
| emvsim->errval = 0; |
| spin_unlock_irqrestore(&emvsim->lock, flags); |
| |
| break; |
| |
| case SIM_IOCTL_SET_PROTOCOL: |
| ret = copy_from_user(&emvsim->protocol_type, (int *)arg, |
| sizeof(int)); |
| if (ret) |
| errval = -SIM_E_ACCESS; |
| break; |
| |
| case SIM_IOCTL_SET_TIMING: |
| ret = copy_from_user(&emvsim->timing_data, (sim_timing_t *)arg, |
| sizeof(sim_timing_t)); |
| if (ret) { |
| dev_err(emvsim_dev.parent, "Copy Error\n"); |
| errval = ret; |
| break; |
| } |
| |
| ret = emvsim_check_timing_data(&emvsim->timing_data); |
| if (ret) |
| errval = ret; |
| |
| break; |
| |
| case SIM_IOCTL_SET_BAUD: |
| ret = copy_from_user(&emvsim->baud_rate, (sim_baud_t *)arg, |
| sizeof(sim_baud_t)); |
| if (ret) { |
| dev_err(emvsim_dev.parent, "Copy Error\n"); |
| errval = ret; |
| break; |
| } |
| |
| emvsim_check_baud_rate(&emvsim->baud_rate); |
| |
| break; |
| case SIM_IOCTL_WAIT: |
| ret = copy_from_user(&delay, (unsigned int *)arg, |
| sizeof(unsigned int)); |
| if (ret) { |
| dev_err(emvsim_dev.parent, "\nWait Copy Error\n"); |
| errval = ret; |
| break; |
| } |
| |
| emvsim_polling_delay(emvsim, delay); |
| break; |
| |
| case SIM_IOCTL_GET_PRESENSE: |
| if (put_user(emvsim->present, (int *)arg)) |
| errval = -SIM_E_ACCESS; |
| break; |
| |
| case SIM_IOCTL_CARD_LOCK: |
| errval = emvsim_card_lock(emvsim); |
| break; |
| |
| case SIM_IOCTL_CARD_EJECT: |
| errval = emvsim_card_eject(emvsim); |
| break; |
| }; |
| |
| return errval; |
| }; |
| |
| static int emvsim_open(struct inode *inode, struct file *file) |
| { |
| int errval = SIM_OK; |
| struct emvsim_t *emvsim = dev_get_drvdata(emvsim_dev.parent); |
| |
| file->private_data = emvsim; |
| spin_lock_init(&emvsim->lock); |
| |
| if (!emvsim->ioaddr) { |
| errval = -ENOMEM; |
| return errval; |
| } |
| |
| if (!emvsim->open_cnt) { |
| clk_prepare_enable(emvsim->ipg); |
| clk_prepare_enable(emvsim->clk); |
| } |
| |
| emvsim->open_cnt = 1; |
| init_completion(&emvsim->xfer_done); |
| errval = emvsim_reset_module(emvsim); |
| emvsim_data_reset(emvsim); |
| |
| return errval; |
| }; |
| |
| static int emvsim_release(struct inode *inode, struct file *file) |
| { |
| u32 reg_data; |
| struct emvsim_t *emvsim = (struct emvsim_t *)file->private_data; |
| |
| /* disable presense detection interrupt */ |
| reg_data = __raw_readl(emvsim->ioaddr + EMV_SIM_PCSR); |
| __raw_writel(reg_data | SPDIM, emvsim->ioaddr + EMV_SIM_PCSR); |
| |
| if (emvsim->present != SIM_PRESENT_REMOVED) |
| emvsim_deactivate(emvsim); |
| |
| if (emvsim->open_cnt) { |
| clk_disable_unprepare(emvsim->clk); |
| clk_disable_unprepare(emvsim->ipg); |
| } |
| |
| emvsim->open_cnt = 0; |
| |
| return 0; |
| }; |
| |
| static const struct file_operations emvsim_fops = { |
| .owner = THIS_MODULE, |
| .open = emvsim_open, |
| .release = emvsim_release, |
| .unlocked_ioctl = emvsim_ioctl, |
| }; |
| |
| static struct miscdevice emvsim_dev = { |
| MISC_DYNAMIC_MINOR, |
| "mxc_sim", |
| &emvsim_fops |
| }; |
| |
| static const struct of_device_id emvsim_imx_dt_ids[] = { |
| { .compatible = "fsl,imx8-emvsim" }, |
| { /* sentinel */ } |
| }; |
| |
| MODULE_DEVICE_TABLE(of, emvsim_imx_dt_ids); |
| |
| static int emvsim_probe(struct platform_device *pdev) |
| { |
| int ret = 0; |
| const struct of_device_id *of_id; |
| struct emvsim_t *emvsim = NULL; |
| |
| emvsim = devm_kzalloc(&pdev->dev, sizeof(struct emvsim_t), |
| GFP_KERNEL); |
| if (!emvsim) |
| return -ENOMEM; |
| |
| of_id = of_match_device(emvsim_imx_dt_ids, &pdev->dev); |
| if (of_id) |
| pdev->id_entry = of_id->data; |
| else |
| return -EINVAL; |
| |
| emvsim->clk_rate = FCLK_FREQ; |
| emvsim->open_cnt = 0; |
| |
| emvsim->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!emvsim->res) { |
| dev_err(emvsim_dev.parent, "Can't get the MEMORY\n"); |
| return -ENOMEM; |
| } |
| emvsim->ioaddr = devm_ioremap_resource(&pdev->dev, emvsim->res); |
| if (IS_ERR(emvsim->ioaddr)) { |
| dev_err(&pdev->dev, |
| "failed to get ioremap base\n"); |
| ret = PTR_ERR(emvsim->ioaddr); |
| return ret; |
| } |
| |
| /* request the emvsim per clk and ipg clk */ |
| emvsim->clk = devm_clk_get(&pdev->dev, "sim"); |
| if (IS_ERR(emvsim->clk)) { |
| ret = PTR_ERR(emvsim->clk); |
| dev_err(emvsim_dev.parent, "Get PER CLK ERROR !\n"); |
| return ret; |
| } |
| |
| emvsim->ipg = devm_clk_get(&pdev->dev, "ipg"); |
| if (IS_ERR(emvsim->ipg)) { |
| ret = PTR_ERR(emvsim->ipg); |
| dev_err(emvsim_dev.parent, "Get IPG CLK ERROR !\n"); |
| return ret; |
| } |
| |
| emvsim->irq = platform_get_irq(pdev, 0); |
| if (emvsim->irq < 0) { |
| dev_err(&pdev->dev, "No irq line provided\n"); |
| return -ENOENT; |
| } |
| |
| if (devm_request_irq(&pdev->dev, emvsim->irq, emvsim_irq_handler, |
| 0, "mxc_emvsim_irq", emvsim)) { |
| dev_err(&pdev->dev, "can't claim irq %d\n", emvsim->irq); |
| return -ENOENT; |
| } |
| |
| platform_set_drvdata(pdev, emvsim); |
| emvsim_dev.parent = &pdev->dev; |
| |
| ret = misc_register(&emvsim_dev); |
| dev_info(&pdev->dev, "emvsim register %s\n", ret ? "fail" : "success"); |
| |
| return ret; |
| } |
| |
| static int emvsim_remove(struct platform_device *pdev) |
| { |
| struct emvsim_t *emvsim = platform_get_drvdata(pdev); |
| |
| if (emvsim->open_cnt) { |
| clk_disable_unprepare(emvsim->clk); |
| clk_disable_unprepare(emvsim->ipg); |
| } |
| |
| misc_deregister(&emvsim_dev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int emvsim_suspend(struct platform_device *pdev, pm_message_t state) |
| { |
| struct emvsim_t *emvsim = platform_get_drvdata(pdev); |
| |
| if (emvsim->open_cnt) { |
| clk_disable_unprepare(emvsim->clk); |
| clk_disable_unprepare(emvsim->ipg); |
| } |
| |
| pinctrl_pm_select_sleep_state(&pdev->dev); |
| |
| return 0; |
| } |
| |
| static int emvsim_resume(struct platform_device *pdev) |
| { |
| struct emvsim_t *emvsim = platform_get_drvdata(pdev); |
| |
| if (!emvsim->open_cnt) { |
| clk_prepare_enable(emvsim->ipg); |
| clk_prepare_enable(emvsim->clk); |
| } |
| |
| pinctrl_pm_select_default_state(&pdev->dev); |
| |
| return 0; |
| } |
| |
| #else |
| #define emvsim_suspend NULL |
| #define emvsim_resume NULL |
| #endif |
| |
| static struct platform_driver emvsim_driver = { |
| .driver = { |
| .name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| .of_match_table = emvsim_imx_dt_ids, |
| }, |
| .probe = emvsim_probe, |
| .remove = emvsim_remove, |
| .suspend = emvsim_suspend, |
| .resume = emvsim_resume, |
| }; |
| |
| static int __init emvsim_drv_init(void) |
| { |
| return platform_driver_register(&emvsim_driver); |
| } |
| |
| static void __exit emvsim_drv_exit(void) |
| { |
| platform_driver_unregister(&emvsim_driver); |
| } |
| |
| module_init(emvsim_drv_init); |
| module_exit(emvsim_drv_exit); |
| |
| MODULE_AUTHOR("Gao Pan <pandy.gao@nxp.com>"); |
| MODULE_DESCRIPTION("NXP EMVSIM Driver"); |
| MODULE_LICENSE("GPL"); |