| TI LP873X PMIC MFD driver |
| |
| Required properties: |
| - compatible: "ti,lp8732", "ti,lp8733" |
| - reg: I2C slave address. |
| - gpio-controller: Marks the device node as a GPIO Controller. |
| - #gpio-cells: Should be two. The first cell is the pin number and |
| the second cell is used to specify flags. |
| See ../gpio/gpio.txt for more information. |
| - regulators: List of child nodes that specify the regulator |
| initialization data. |
| Example: |
| |
| pmic: lp8733@60 { |
| compatible = "ti,lp8733"; |
| reg = <0x60>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| regulators { |
| lp8733_buck0: buck0 { |
| regulator-name = "lp8733-buck0"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1400000>; |
| regulator-min-microamp = <1500000>; |
| regulator-max-microamp = <4000000>; |
| regulator-ramp-delay = <10000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| lp8733_buck1: buck1 { |
| regulator-name = "lp8733-buck1"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1400000>; |
| regulator-min-microamp = <1500000>; |
| regulator-max-microamp = <4000000>; |
| regulator-ramp-delay = <10000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| lp8733_ldo0: ldo0 { |
| regulator-name = "lp8733-ldo0"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| lp8733_ldo1: ldo1 { |
| regulator-name = "lp8733-ldo1"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| }; |
| }; |
