| /* |
| * GSPCA Endpoints (formerly known as AOX) se401 USB Camera sub Driver |
| * |
| * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com> |
| * |
| * Based on the v4l1 se401 driver which is: |
| * |
| * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #define SE401_REQ_GET_CAMERA_DESCRIPTOR 0x06 |
| #define SE401_REQ_START_CONTINUOUS_CAPTURE 0x41 |
| #define SE401_REQ_STOP_CONTINUOUS_CAPTURE 0x42 |
| #define SE401_REQ_CAPTURE_FRAME 0x43 |
| #define SE401_REQ_GET_BRT 0x44 |
| #define SE401_REQ_SET_BRT 0x45 |
| #define SE401_REQ_GET_WIDTH 0x4c |
| #define SE401_REQ_SET_WIDTH 0x4d |
| #define SE401_REQ_GET_HEIGHT 0x4e |
| #define SE401_REQ_SET_HEIGHT 0x4f |
| #define SE401_REQ_GET_OUTPUT_MODE 0x50 |
| #define SE401_REQ_SET_OUTPUT_MODE 0x51 |
| #define SE401_REQ_GET_EXT_FEATURE 0x52 |
| #define SE401_REQ_SET_EXT_FEATURE 0x53 |
| #define SE401_REQ_CAMERA_POWER 0x56 |
| #define SE401_REQ_LED_CONTROL 0x57 |
| #define SE401_REQ_BIOS 0xff |
| |
| #define SE401_BIOS_READ 0x07 |
| |
| #define SE401_FORMAT_BAYER 0x40 |
| |
| /* Hyundai hv7131b registers |
| 7121 and 7141 should be the same (haven't really checked...) */ |
| /* Mode registers: */ |
| #define HV7131_REG_MODE_A 0x00 |
| #define HV7131_REG_MODE_B 0x01 |
| #define HV7131_REG_MODE_C 0x02 |
| /* Frame registers: */ |
| #define HV7131_REG_FRSU 0x10 |
| #define HV7131_REG_FRSL 0x11 |
| #define HV7131_REG_FCSU 0x12 |
| #define HV7131_REG_FCSL 0x13 |
| #define HV7131_REG_FWHU 0x14 |
| #define HV7131_REG_FWHL 0x15 |
| #define HV7131_REG_FWWU 0x16 |
| #define HV7131_REG_FWWL 0x17 |
| /* Timing registers: */ |
| #define HV7131_REG_THBU 0x20 |
| #define HV7131_REG_THBL 0x21 |
| #define HV7131_REG_TVBU 0x22 |
| #define HV7131_REG_TVBL 0x23 |
| #define HV7131_REG_TITU 0x25 |
| #define HV7131_REG_TITM 0x26 |
| #define HV7131_REG_TITL 0x27 |
| #define HV7131_REG_TMCD 0x28 |
| /* Adjust Registers: */ |
| #define HV7131_REG_ARLV 0x30 |
| #define HV7131_REG_ARCG 0x31 |
| #define HV7131_REG_AGCG 0x32 |
| #define HV7131_REG_ABCG 0x33 |
| #define HV7131_REG_APBV 0x34 |
| #define HV7131_REG_ASLP 0x54 |
| /* Offset Registers: */ |
| #define HV7131_REG_OFSR 0x50 |
| #define HV7131_REG_OFSG 0x51 |
| #define HV7131_REG_OFSB 0x52 |
| /* REset level statistics registers: */ |
| #define HV7131_REG_LOREFNOH 0x57 |
| #define HV7131_REG_LOREFNOL 0x58 |
| #define HV7131_REG_HIREFNOH 0x59 |
| #define HV7131_REG_HIREFNOL 0x5a |
| |
| /* se401 registers */ |
| #define SE401_OPERATINGMODE 0x2000 |
