| /* |
| * Copyright (C) 2016 InforceComputing |
| * Author: Vinay Simha BN <simhavcs@gmail.com> |
| * |
| * Copyright (C) 2016 Linaro Ltd |
| * Author: Sumit Semwal <sumit.semwal@linaro.org> |
| * |
| * From internet archives, the panel for Nexus 7 2nd Gen, 2013 model is a |
| * JDI model LT070ME05000, and its data sheet is at: |
| * http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| #include <linux/backlight.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_panel.h> |
| |
| #include <video/mipi_display.h> |
| |
| static const char * const regulator_names[] = { |
| "vddp", |
| "iovcc" |
| }; |
| |
| struct jdi_panel { |
| struct drm_panel base; |
| struct mipi_dsi_device *dsi; |
| |
| struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)]; |
| |
| struct gpio_desc *enable_gpio; |
| struct gpio_desc *reset_gpio; |
| struct gpio_desc *dcdc_en_gpio; |
| struct backlight_device *backlight; |
| |
| bool prepared; |
| bool enabled; |
| |
| const struct drm_display_mode *mode; |
| }; |
| |
| static inline struct jdi_panel *to_jdi_panel(struct drm_panel *panel) |
| { |
| return container_of(panel, struct jdi_panel, base); |
| } |
| |
| static int jdi_panel_init(struct jdi_panel *jdi) |
| { |
| struct mipi_dsi_device *dsi = jdi->dsi; |
| struct device *dev = &jdi->dsi->dev; |
| int ret; |
| |
| dsi->mode_flags |= MIPI_DSI_MODE_LPM; |
| |
| ret = mipi_dsi_dcs_soft_reset(dsi); |
| if (ret < 0) |
| return ret; |
| |
| usleep_range(10000, 20000); |
| |
| ret = mipi_dsi_dcs_set_pixel_format(dsi, MIPI_DCS_PIXEL_FMT_24BIT << 4); |
| if (ret < 0) { |
| dev_err(dev, "failed to set pixel format: %d\n", ret); |
| return ret; |
| } |
| |
| ret = mipi_dsi_dcs_set_column_address(dsi, 0, jdi->mode->hdisplay - 1); |
| if (ret < 0) { |
| dev_err(dev, "failed to set column address: %d\n", ret); |
| return ret; |
| } |
| |
| ret = mipi_dsi_dcs_set_page_address(dsi, 0, jdi->mode->vdisplay - 1); |
| if (ret < 0) { |
| dev_err(dev, "failed to set page address: %d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * BIT(5) BCTRL = 1 Backlight Control Block On, Brightness registers |
| * are active |
| * BIT(3) BL = 1 Backlight Control On |
| * BIT(2) DD = 0 Display Dimming is Off |
| */ |
| ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, |
| (u8[]){ 0x24 }, 1); |
| if (ret < 0) { |
| dev_err(dev, "failed to write control display: %d\n", ret); |
| return ret; |
| } |
| |
| /* CABC off */ |
| ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_POWER_SAVE, |
| (u8[]){ 0x00 }, 1); |
| if (ret < 0) { |
| dev_err(dev, "failed to set cabc off: %d\n", ret); |
| return ret; |
| } |
| |
| ret = mipi_dsi_dcs_exit_sleep_mode(dsi); |
| if (ret < 0) { |
| dev_err(dev, "failed to set exit sleep mode: %d\n", ret); |
| return ret; |
| } |
| |
| msleep(120); |
| |
| ret = mipi_dsi_generic_write(dsi, (u8[]){0xB0, 0x00}, 2); |
| if (ret < 0) { |
| dev_err(dev, "failed to set mcap: %d\n", ret); |
| return ret; |
| } |
| |
| mdelay(10); |
| |
| /* Interface setting, video mode */ |
| ret = mipi_dsi_generic_write(dsi, (u8[]) |
| {0xB3, 0x26, 0x08, 0x00, 0x20, 0x00}, 6); |
| if (ret < 0) { |
| dev_err(dev, "failed to set display interface setting: %d\n" |
| , ret); |
| return ret; |
| } |
| |
| mdelay(20); |
| |
| ret = mipi_dsi_generic_write(dsi, (u8[]){0xB0, 0x03}, 2); |
| if (ret < 0) { |
| dev_err(dev, "failed to set default values for mcap: %d\n" |
| , ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int jdi_panel_on(struct jdi_panel *jdi) |
| { |
| struct mipi_dsi_device *dsi = jdi->dsi; |
| struct device *dev = &jdi->dsi->dev; |
| int ret; |
| |
| dsi->mode_flags |= MIPI_DSI_MODE_LPM; |
| |
| ret = mipi_dsi_dcs_set_display_on(dsi); |
| if (ret < 0) |
| dev_err(dev, "failed to set display on: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static void jdi_panel_off(struct jdi_panel *jdi) |
| { |
| struct mipi_dsi_device *dsi = jdi->dsi; |
| struct device *dev = &jdi->dsi->dev; |
| int ret; |
| |
| dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; |
| |
| ret = mipi_dsi_dcs_set_display_off(dsi); |
| if (ret < 0) |
| dev_err(dev, "failed to set display off: %d\n", ret); |
| |
| ret = mipi_dsi_dcs_enter_sleep_mode(dsi); |
| if (ret < 0) |
| dev_err(dev, "failed to enter sleep mode: %d\n", ret); |
| |
| msleep(100); |
| } |
| |
| static int jdi_panel_disable(struct drm_panel *panel) |
| { |
| struct jdi_panel *jdi = to_jdi_panel(panel); |
| |
| if (!jdi->enabled) |
| return 0; |
| |
| jdi->backlight->props.power = FB_BLANK_POWERDOWN; |
| backlight_update_status(jdi->backlight); |
| |
| jdi->enabled = false; |
| |
| return 0; |
| } |
| |
| static int jdi_panel_unprepare(struct drm_panel *panel) |
| { |
| struct jdi_panel *jdi = to_jdi_panel(panel); |
| struct device *dev = &jdi->dsi->dev; |
| int ret; |
| |
| if (!jdi->prepared) |
| return 0; |
| |
| jdi_panel_off(jdi); |
| |
| ret = regulator_bulk_disable(ARRAY_SIZE(jdi->supplies), jdi->supplies); |
| if (ret < 0) |
| dev_err(dev, "regulator disable failed, %d\n", ret); |
| |
| gpiod_set_value(jdi->enable_gpio, 0); |
| |
| gpiod_set_value(jdi->reset_gpio, 1); |
| |
| gpiod_set_value(jdi->dcdc_en_gpio, 0); |
| |
| jdi->prepared = false; |
| |
| return 0; |
| } |
| |
| static int jdi_panel_prepare(struct drm_panel *panel) |
| { |
| struct jdi_panel *jdi = to_jdi_panel(panel); |
| struct device *dev = &jdi->dsi->dev; |
| int ret; |
| |
| if (jdi->prepared) |
| return 0; |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(jdi->supplies), jdi->supplies); |
| if (ret < 0) { |
| dev_err(dev, "regulator enable failed, %d\n", ret); |
| return ret; |
| } |
| |
| msleep(20); |
| |
| gpiod_set_value(jdi->dcdc_en_gpio, 1); |
| usleep_range(10, 20); |
| |
| gpiod_set_value(jdi->reset_gpio, 0); |
| usleep_range(10, 20); |
| |
| gpiod_set_value(jdi->enable_gpio, 1); |
| usleep_range(10, 20); |
| |
| ret = jdi_panel_init(jdi); |
| if (ret < 0) { |
| dev_err(dev, "failed to init panel: %d\n", ret); |
| goto poweroff; |
| } |
| |
| ret = jdi_panel_on(jdi); |
| if (ret < 0) { |
| dev_err(dev, "failed to set panel on: %d\n", ret); |
| goto poweroff; |
| } |
| |
| jdi->prepared = true; |
| |
| return 0; |
| |
| poweroff: |
| ret = regulator_bulk_disable(ARRAY_SIZE(jdi->supplies), jdi->supplies); |
| if (ret < 0) |
| dev_err(dev, "regulator disable failed, %d\n", ret); |
| |
| gpiod_set_value(jdi->enable_gpio, 0); |
| |
| gpiod_set_value(jdi->reset_gpio, 1); |
| |
| gpiod_set_value(jdi->dcdc_en_gpio, 0); |
| |
| return ret; |
| } |
| |
| static int jdi_panel_enable(struct drm_panel *panel) |
| { |
| struct jdi_panel *jdi = to_jdi_panel(panel); |
| |
| if (jdi->enabled) |
| return 0; |
| |
| jdi->backlight->props.power = FB_BLANK_UNBLANK; |
| backlight_update_status(jdi->backlight); |
| |
| jdi->enabled = true; |
| |
| return 0; |
| } |
| |
| static const struct drm_display_mode default_mode = { |
| .clock = 155493, |
| .hdisplay = 1200, |
| .hsync_start = 1200 + 48, |
| .hsync_end = 1200 + 48 + 32, |
| .htotal = 1200 + 48 + 32 + 60, |
| .vdisplay = 1920, |
| .vsync_start = 1920 + 3, |
| .vsync_end = 1920 + 3 + 5, |
| .vtotal = 1920 + 3 + 5 + 6, |
| .vrefresh = 60, |
| .flags = 0, |
| }; |
| |
| static int jdi_panel_get_modes(struct drm_panel *panel) |
| { |
| struct drm_display_mode *mode; |
| struct jdi_panel *jdi = to_jdi_panel(panel); |
| struct device *dev = &jdi->dsi->dev; |
| |
| mode = drm_mode_duplicate(panel->drm, &default_mode); |
| if (!mode) { |
| dev_err(dev, "failed to add mode %ux%ux@%u\n", |
| default_mode.hdisplay, default_mode.vdisplay, |
| default_mode.vrefresh); |
| return -ENOMEM; |
| } |
| |
| drm_mode_set_name(mode); |
| |
| drm_mode_probed_add(panel->connector, mode); |
| |
| panel->connector->display_info.width_mm = 95; |
| panel->connector->display_info.height_mm = 151; |
| |
| return 1; |
| } |
| |
| static int dsi_dcs_bl_get_brightness(struct backlight_device *bl) |
| { |
| struct mipi_dsi_device *dsi = bl_get_data(bl); |
| int ret; |
| u16 brightness = bl->props.brightness; |
| |
| dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; |
| |
| ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness); |
| if (ret < 0) |
| return ret; |
| |
| dsi->mode_flags |= MIPI_DSI_MODE_LPM; |
| |
| return brightness & 0xff; |
| } |
| |
| static int dsi_dcs_bl_update_status(struct backlight_device *bl) |
| { |
| struct mipi_dsi_device *dsi = bl_get_data(bl); |
| int ret; |
| |
| dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; |
| |
| ret = mipi_dsi_dcs_set_display_brightness(dsi, bl->props.brightness); |
| if (ret < 0) |
| return ret; |
| |
| dsi->mode_flags |= MIPI_DSI_MODE_LPM; |
| |
| return 0; |
| } |
| |
| static const struct backlight_ops dsi_bl_ops = { |
| .update_status = dsi_dcs_bl_update_status, |
| .get_brightness = dsi_dcs_bl_get_brightness, |
| }; |
| |
| static struct backlight_device * |
| drm_panel_create_dsi_backlight(struct mipi_dsi_device *dsi) |
| { |
| struct device *dev = &dsi->dev; |
| struct backlight_properties props; |
| |
| memset(&props, 0, sizeof(props)); |
| props.type = BACKLIGHT_RAW; |
| props.brightness = 255; |
| props.max_brightness = 255; |
| |
| return devm_backlight_device_register(dev, dev_name(dev), dev, dsi, |
| &dsi_bl_ops, &props); |
| } |
| |
| static const struct drm_panel_funcs jdi_panel_funcs = { |
| .disable = jdi_panel_disable, |
| .unprepare = jdi_panel_unprepare, |
| .prepare = jdi_panel_prepare, |
| .enable = jdi_panel_enable, |
| .get_modes = jdi_panel_get_modes, |
| }; |
| |
| static const struct of_device_id jdi_of_match[] = { |
| { .compatible = "jdi,lt070me05000", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, jdi_of_match); |
| |
| static int jdi_panel_add(struct jdi_panel *jdi) |
| { |
| struct device *dev = &jdi->dsi->dev; |
| int ret; |
| unsigned int i; |
| |
| jdi->mode = &default_mode; |
| |
| for (i = 0; i < ARRAY_SIZE(jdi->supplies); i++) |
| jdi->supplies[i].supply = regulator_names[i]; |
| |
| ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(jdi->supplies), |
| jdi->supplies); |
| if (ret < 0) { |
| dev_err(dev, "failed to init regulator, ret=%d\n", ret); |
| return ret; |
| } |
| |
| jdi->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); |
| if (IS_ERR(jdi->enable_gpio)) { |
| ret = PTR_ERR(jdi->enable_gpio); |
| dev_err(dev, "cannot get enable-gpio %d\n", ret); |
| return ret; |
| } |
| |
| jdi->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); |
| if (IS_ERR(jdi->reset_gpio)) { |
| ret = PTR_ERR(jdi->reset_gpio); |
| dev_err(dev, "cannot get reset-gpios %d\n", ret); |
| return ret; |
| } |
| |
| jdi->dcdc_en_gpio = devm_gpiod_get(dev, "dcdc-en", GPIOD_OUT_LOW); |
| if (IS_ERR(jdi->dcdc_en_gpio)) { |
| ret = PTR_ERR(jdi->dcdc_en_gpio); |
| dev_err(dev, "cannot get dcdc-en-gpio %d\n", ret); |
| return ret; |
| } |
| |
| jdi->backlight = drm_panel_create_dsi_backlight(jdi->dsi); |
| if (IS_ERR(jdi->backlight)) { |
| ret = PTR_ERR(jdi->backlight); |
| dev_err(dev, "failed to register backlight %d\n", ret); |
| return ret; |
| } |
| |
| drm_panel_init(&jdi->base); |
| jdi->base.funcs = &jdi_panel_funcs; |
| jdi->base.dev = &jdi->dsi->dev; |
| |
| ret = drm_panel_add(&jdi->base); |
| |
| return ret; |
| } |
| |
| static void jdi_panel_del(struct jdi_panel *jdi) |
| { |
| if (jdi->base.dev) |
| drm_panel_remove(&jdi->base); |
| } |
| |
| static int jdi_panel_probe(struct mipi_dsi_device *dsi) |
| { |
| struct jdi_panel *jdi; |
| int ret; |
| |
| dsi->lanes = 4; |
| dsi->format = MIPI_DSI_FMT_RGB888; |
| dsi->mode_flags = MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO | |
| MIPI_DSI_CLOCK_NON_CONTINUOUS; |
| |
| jdi = devm_kzalloc(&dsi->dev, sizeof(*jdi), GFP_KERNEL); |
| if (!jdi) |
| return -ENOMEM; |
| |
| mipi_dsi_set_drvdata(dsi, jdi); |
| |
| jdi->dsi = dsi; |
| |
| ret = jdi_panel_add(jdi); |
| if (ret < 0) |
| return ret; |
| |
| return mipi_dsi_attach(dsi); |
| } |
| |
| static int jdi_panel_remove(struct mipi_dsi_device *dsi) |
| { |
| struct jdi_panel *jdi = mipi_dsi_get_drvdata(dsi); |
| int ret; |
| |
| ret = jdi_panel_disable(&jdi->base); |
| if (ret < 0) |
| dev_err(&dsi->dev, "failed to disable panel: %d\n", ret); |
| |
| ret = mipi_dsi_detach(dsi); |
| if (ret < 0) |
| dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", |
| ret); |
| |
| drm_panel_detach(&jdi->base); |
| jdi_panel_del(jdi); |
| |
| return 0; |
| } |
| |
| static void jdi_panel_shutdown(struct mipi_dsi_device *dsi) |
| { |
| struct jdi_panel *jdi = mipi_dsi_get_drvdata(dsi); |
| |
| jdi_panel_disable(&jdi->base); |
| } |
| |
| static struct mipi_dsi_driver jdi_panel_driver = { |
| .driver = { |
| .name = "panel-jdi-lt070me05000", |
| .of_match_table = jdi_of_match, |
| }, |
| .probe = jdi_panel_probe, |
| .remove = jdi_panel_remove, |
| .shutdown = jdi_panel_shutdown, |
| }; |
| module_mipi_dsi_driver(jdi_panel_driver); |
| |
| MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>"); |
| MODULE_AUTHOR("Vinay Simha BN <simhavcs@gmail.com>"); |
| MODULE_DESCRIPTION("JDI LT070ME05000 WUXGA"); |
| MODULE_LICENSE("GPL v2"); |