| /* i915_drv.h -- Private header for the I915 driver -*- linux-c -*- |
| */ |
| /* |
| * |
| * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #ifndef _I915_DRV_H_ |
| #define _I915_DRV_H_ |
| |
| #include <uapi/drm/i915_drm.h> |
| #include <uapi/drm/drm_fourcc.h> |
| |
| #include <linux/io-mapping.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c-algo-bit.h> |
| #include <linux/backlight.h> |
| #include <linux/hash.h> |
| #include <linux/intel-iommu.h> |
| #include <linux/kref.h> |
| #include <linux/pm_qos.h> |
| #include <linux/reservation.h> |
| #include <linux/shmem_fs.h> |
| |
| #include <drm/drmP.h> |
| #include <drm/intel-gtt.h> |
| #include <drm/drm_legacy.h> /* for struct drm_dma_handle */ |
| #include <drm/drm_gem.h> |
| #include <drm/drm_auth.h> |
| #include <drm/drm_cache.h> |
| |
| #include "i915_params.h" |
| #include "i915_reg.h" |
| #include "i915_utils.h" |
| |
| #include "intel_uncore.h" |
| #include "intel_bios.h" |
| #include "intel_dpll_mgr.h" |
| #include "intel_uc.h" |
| #include "intel_lrc.h" |
| #include "intel_ringbuffer.h" |
| |
| #include "i915_gem.h" |
| #include "i915_gem_context.h" |
| #include "i915_gem_fence_reg.h" |
| #include "i915_gem_object.h" |
| #include "i915_gem_gtt.h" |
| #include "i915_gem_render_state.h" |
| #include "i915_gem_request.h" |
| #include "i915_gem_timeline.h" |
| |
| #include "i915_vma.h" |
| |
| #include "intel_gvt.h" |
| |
| /* General customization: |
| */ |
| |
| #define DRIVER_NAME "i915" |
| #define DRIVER_DESC "Intel Graphics" |
| #define DRIVER_DATE "20170818" |
| #define DRIVER_TIMESTAMP 1503088845 |
| |
| /* Use I915_STATE_WARN(x) and I915_STATE_WARN_ON() (rather than WARN() and |
| * WARN_ON()) for hw state sanity checks to check for unexpected conditions |
| * which may not necessarily be a user visible problem. This will either |
| * WARN() or DRM_ERROR() depending on the verbose_checks moduleparam, to |
| * enable distros and users to tailor their preferred amount of i915 abrt |
| * spam. |
| */ |
| #define I915_STATE_WARN(condition, format...) ({ \ |
| int __ret_warn_on = !!(condition); \ |
| if (unlikely(__ret_warn_on)) \ |
| if (!WARN(i915.verbose_state_checks, format)) \ |
| DRM_ERROR(format); \ |
| unlikely(__ret_warn_on); \ |
| }) |
| |
| #define I915_STATE_WARN_ON(x) \ |
| I915_STATE_WARN((x), "%s", "WARN_ON(" __stringify(x) ")") |
| |
| bool __i915_inject_load_failure(const char *func, int line); |
| #define i915_inject_load_failure() \ |
| __i915_inject_load_failure(__func__, __LINE__) |
| |
| typedef struct { |
| uint32_t val; |
| } uint_fixed_16_16_t; |
| |
| #define FP_16_16_MAX ({ \ |
| uint_fixed_16_16_t fp; \ |
| fp.val = UINT_MAX; \ |
| fp; \ |
| }) |
| |
| static inline bool is_fixed16_zero(uint_fixed_16_16_t val) |
| { |
| if (val.val == 0) |
| return true; |
| return false; |
| } |
| |
| static inline uint_fixed_16_16_t u32_to_fixed16(uint32_t val) |
| { |
| uint_fixed_16_16_t fp; |
| |
| WARN_ON(val >> 16); |
| |
| fp.val = val << 16; |
| return fp; |
| } |
| |
| static inline uint32_t fixed16_to_u32_round_up(uint_fixed_16_16_t fp) |
| { |
| return DIV_ROUND_UP(fp.val, 1 << 16); |
| } |
| |
| static inline uint32_t fixed16_to_u32(uint_fixed_16_16_t fp) |
| { |
| return fp.val >> 16; |
| } |
| |
| static inline uint_fixed_16_16_t min_fixed16(uint_fixed_16_16_t min1, |
| uint_fixed_16_16_t min2) |
| { |
| uint_fixed_16_16_t min; |
| |
| min.val = min(min1.val, min2.val); |
| return min; |
| } |
| |
| static inline uint_fixed_16_16_t max_fixed16(uint_fixed_16_16_t max1, |
| uint_fixed_16_16_t max2) |
| { |
| uint_fixed_16_16_t max; |
| |
| max.val = max(max1.val, max2.val); |
| return max; |
| } |
| |
| static inline uint_fixed_16_16_t clamp_u64_to_fixed16(uint64_t val) |
| { |
| uint_fixed_16_16_t fp; |
| WARN_ON(val >> 32); |
| fp.val = clamp_t(uint32_t, val, 0, ~0); |
| return fp; |
| } |
| |
| static inline uint32_t div_round_up_fixed16(uint_fixed_16_16_t val, |
| uint_fixed_16_16_t d) |
| { |
| return DIV_ROUND_UP(val.val, d.val); |
| } |
| |
| static inline uint32_t mul_round_up_u32_fixed16(uint32_t val, |
| uint_fixed_16_16_t mul) |
| { |
| uint64_t intermediate_val; |
| |
| intermediate_val = (uint64_t) val * mul.val; |
| intermediate_val = DIV_ROUND_UP_ULL(intermediate_val, 1 << 16); |
| WARN_ON(intermediate_val >> 32); |
| return clamp_t(uint32_t, intermediate_val, 0, ~0); |
| } |
| |
| static inline uint_fixed_16_16_t mul_fixed16(uint_fixed_16_16_t val, |
| uint_fixed_16_16_t mul) |
| { |
| uint64_t intermediate_val; |
| |
| intermediate_val = (uint64_t) val.val * mul.val; |
| intermediate_val = intermediate_val >> 16; |
| return clamp_u64_to_fixed16(intermediate_val); |
| } |
| |
| static inline uint_fixed_16_16_t div_fixed16(uint32_t val, uint32_t d) |
| { |
| uint64_t interm_val; |
| |
| interm_val = (uint64_t)val << 16; |
| interm_val = DIV_ROUND_UP_ULL(interm_val, d); |
| return clamp_u64_to_fixed16(interm_val); |
| } |
| |
| static inline uint32_t div_round_up_u32_fixed16(uint32_t val, |
| uint_fixed_16_16_t d) |
| { |
| uint64_t interm_val; |
| |
| interm_val = (uint64_t)val << 16; |
| interm_val = DIV_ROUND_UP_ULL(interm_val, d.val); |
| WARN_ON(interm_val >> 32); |
| return clamp_t(uint32_t, interm_val, 0, ~0); |
| } |
| |
| static inline uint_fixed_16_16_t mul_u32_fixed16(uint32_t val, |
| uint_fixed_16_16_t mul) |
| { |
| uint64_t intermediate_val; |
| |
| intermediate_val = (uint64_t) val * mul.val; |
| return clamp_u64_to_fixed16(intermediate_val); |
| } |
| |
| static inline uint_fixed_16_16_t add_fixed16(uint_fixed_16_16_t add1, |
| uint_fixed_16_16_t add2) |
| { |
| uint64_t interm_sum; |
| |
| interm_sum = (uint64_t) add1.val + add2.val; |
| return clamp_u64_to_fixed16(interm_sum); |
| } |
| |
| static inline uint_fixed_16_16_t add_fixed16_u32(uint_fixed_16_16_t add1, |
| uint32_t add2) |
| { |
| uint64_t interm_sum; |
| uint_fixed_16_16_t interm_add2 = u32_to_fixed16(add2); |
| |
| interm_sum = (uint64_t) add1.val + interm_add2.val; |
| return clamp_u64_to_fixed16(interm_sum); |
| } |
| |
| static inline const char *yesno(bool v) |
| { |
| return v ? "yes" : "no"; |
| } |
| |
| static inline const char *onoff(bool v) |
| { |
| return v ? "on" : "off"; |
| } |
| |
| static inline const char *enableddisabled(bool v) |
| { |
| return v ? "enabled" : "disabled"; |
| } |
| |
| enum pipe { |
| INVALID_PIPE = -1, |
| PIPE_A = 0, |
| PIPE_B, |
| PIPE_C, |
| _PIPE_EDP, |
| I915_MAX_PIPES = _PIPE_EDP |
| }; |
| #define pipe_name(p) ((p) + 'A') |
| |
| enum transcoder { |
| TRANSCODER_A = 0, |
| TRANSCODER_B, |
| TRANSCODER_C, |
| TRANSCODER_EDP, |
| TRANSCODER_DSI_A, |
| TRANSCODER_DSI_C, |
| I915_MAX_TRANSCODERS |
| }; |
| |
| static inline const char *transcoder_name(enum transcoder transcoder) |
| { |
| switch (transcoder) { |
| case TRANSCODER_A: |
| return "A"; |
| case TRANSCODER_B: |
| return "B"; |
| case TRANSCODER_C: |
| return "C"; |
| case TRANSCODER_EDP: |
| return "EDP"; |
| case TRANSCODER_DSI_A: |
| return "DSI A"; |
| case TRANSCODER_DSI_C: |
| return "DSI C"; |
| default: |
| return "<invalid>"; |
| } |
| } |
| |
| static inline bool transcoder_is_dsi(enum transcoder transcoder) |
| { |
| return transcoder == TRANSCODER_DSI_A || transcoder == TRANSCODER_DSI_C; |
| } |
| |
| /* |
| * Global legacy plane identifier. Valid only for primary/sprite |
| * planes on pre-g4x, and only for primary planes on g4x+. |
| */ |
| enum plane { |
| PLANE_A, |
| PLANE_B, |
| PLANE_C, |
| }; |
| #define plane_name(p) ((p) + 'A') |
| |
| #define sprite_name(p, s) ((p) * INTEL_INFO(dev_priv)->num_sprites[(p)] + (s) + 'A') |
| |
| /* |
| * Per-pipe plane identifier. |
| * I915_MAX_PLANES in the enum below is the maximum (across all platforms) |
| * number of planes per CRTC. Not all platforms really have this many planes, |
| * which means some arrays of size I915_MAX_PLANES may have unused entries |
| * between the topmost sprite plane and the cursor plane. |
| * |
| * This is expected to be passed to various register macros |
| * (eg. PLANE_CTL(), PS_PLANE_SEL(), etc.) so adjust with care. |
| */ |
| enum plane_id { |
| PLANE_PRIMARY, |
| PLANE_SPRITE0, |
| PLANE_SPRITE1, |
| PLANE_SPRITE2, |
| PLANE_CURSOR, |
| I915_MAX_PLANES, |
| }; |
| |
| #define for_each_plane_id_on_crtc(__crtc, __p) \ |
| for ((__p) = PLANE_PRIMARY; (__p) < I915_MAX_PLANES; (__p)++) \ |
| for_each_if ((__crtc)->plane_ids_mask & BIT(__p)) |
| |
| enum port { |
| PORT_NONE = -1, |
| PORT_A = 0, |
| PORT_B, |
| PORT_C, |
| PORT_D, |
| PORT_E, |
| I915_MAX_PORTS |
| }; |
| #define port_name(p) ((p) + 'A') |
| |
| #define I915_NUM_PHYS_VLV 2 |
| |
| enum dpio_channel { |
| DPIO_CH0, |
| DPIO_CH1 |
| }; |
| |
| enum dpio_phy { |
| DPIO_PHY0, |
| DPIO_PHY1, |
| DPIO_PHY2, |
| }; |
| |
| enum intel_display_power_domain { |
| POWER_DOMAIN_PIPE_A, |
| POWER_DOMAIN_PIPE_B, |
| POWER_DOMAIN_PIPE_C, |
| POWER_DOMAIN_PIPE_A_PANEL_FITTER, |
| POWER_DOMAIN_PIPE_B_PANEL_FITTER, |
| POWER_DOMAIN_PIPE_C_PANEL_FITTER, |
| POWER_DOMAIN_TRANSCODER_A, |
| POWER_DOMAIN_TRANSCODER_B, |
| POWER_DOMAIN_TRANSCODER_C, |
| POWER_DOMAIN_TRANSCODER_EDP, |
| POWER_DOMAIN_TRANSCODER_DSI_A, |
| POWER_DOMAIN_TRANSCODER_DSI_C, |
| POWER_DOMAIN_PORT_DDI_A_LANES, |
| POWER_DOMAIN_PORT_DDI_B_LANES, |
| POWER_DOMAIN_PORT_DDI_C_LANES, |
| POWER_DOMAIN_PORT_DDI_D_LANES, |
| POWER_DOMAIN_PORT_DDI_E_LANES, |
| POWER_DOMAIN_PORT_DDI_A_IO, |
| POWER_DOMAIN_PORT_DDI_B_IO, |
| POWER_DOMAIN_PORT_DDI_C_IO, |
| POWER_DOMAIN_PORT_DDI_D_IO, |
| POWER_DOMAIN_PORT_DDI_E_IO, |
| POWER_DOMAIN_PORT_DSI, |
| POWER_DOMAIN_PORT_CRT, |
| POWER_DOMAIN_PORT_OTHER, |
| POWER_DOMAIN_VGA, |
| POWER_DOMAIN_AUDIO, |
| POWER_DOMAIN_PLLS, |
| POWER_DOMAIN_AUX_A, |
| POWER_DOMAIN_AUX_B, |
| POWER_DOMAIN_AUX_C, |
| POWER_DOMAIN_AUX_D, |
| POWER_DOMAIN_GMBUS, |
| POWER_DOMAIN_MODESET, |
| POWER_DOMAIN_INIT, |
| |
| POWER_DOMAIN_NUM, |
| }; |
| |
| #define POWER_DOMAIN_PIPE(pipe) ((pipe) + POWER_DOMAIN_PIPE_A) |
| #define POWER_DOMAIN_PIPE_PANEL_FITTER(pipe) \ |
| ((pipe) + POWER_DOMAIN_PIPE_A_PANEL_FITTER) |
| #define POWER_DOMAIN_TRANSCODER(tran) \ |
| ((tran) == TRANSCODER_EDP ? POWER_DOMAIN_TRANSCODER_EDP : \ |
| (tran) + POWER_DOMAIN_TRANSCODER_A) |
| |
| enum hpd_pin { |
| HPD_NONE = 0, |
| HPD_TV = HPD_NONE, /* TV is known to be unreliable */ |
| HPD_CRT, |
| HPD_SDVO_B, |
| HPD_SDVO_C, |
| HPD_PORT_A, |
| HPD_PORT_B, |
| HPD_PORT_C, |
| HPD_PORT_D, |
| HPD_PORT_E, |
| HPD_NUM_PINS |
| }; |
| |
| #define for_each_hpd_pin(__pin) \ |
| for ((__pin) = (HPD_NONE + 1); (__pin) < HPD_NUM_PINS; (__pin)++) |
| |
| #define HPD_STORM_DEFAULT_THRESHOLD 5 |
| |
| struct i915_hotplug { |
| struct work_struct hotplug_work; |
| |
| struct { |
| unsigned long last_jiffies; |
| int count; |
| enum { |
| HPD_ENABLED = 0, |
| HPD_DISABLED = 1, |
| HPD_MARK_DISABLED = 2 |
| } state; |
| } stats[HPD_NUM_PINS]; |
| u32 event_bits; |
| struct delayed_work reenable_work; |
| |
| struct intel_digital_port *irq_port[I915_MAX_PORTS]; |
| u32 long_port_mask; |
| u32 short_port_mask; |
| struct work_struct dig_port_work; |
| |
| struct work_struct poll_init_work; |
| bool poll_enabled; |
| |
| unsigned int hpd_storm_threshold; |
| |
| /* |
| * if we get a HPD irq from DP and a HPD irq from non-DP |
| * the non-DP HPD could block the workqueue on a mode config |
| * mutex getting, that userspace may have taken. However |
| * userspace is waiting on the DP workqueue to run which is |
| * blocked behind the non-DP one. |
| */ |
| struct workqueue_struct *dp_wq; |
| }; |
| |
| #define I915_GEM_GPU_DOMAINS \ |
| (I915_GEM_DOMAIN_RENDER | \ |
| I915_GEM_DOMAIN_SAMPLER | \ |
| I915_GEM_DOMAIN_COMMAND | \ |
| I915_GEM_DOMAIN_INSTRUCTION | \ |
| I915_GEM_DOMAIN_VERTEX) |
| |
| #define for_each_pipe(__dev_priv, __p) \ |
| for ((__p) = 0; (__p) < INTEL_INFO(__dev_priv)->num_pipes; (__p)++) |
| #define for_each_pipe_masked(__dev_priv, __p, __mask) \ |
| for ((__p) = 0; (__p) < INTEL_INFO(__dev_priv)->num_pipes; (__p)++) \ |
| for_each_if ((__mask) & (1 << (__p))) |
| #define for_each_universal_plane(__dev_priv, __pipe, __p) \ |
| for ((__p) = 0; \ |
| (__p) < INTEL_INFO(__dev_priv)->num_sprites[(__pipe)] + 1; \ |
| (__p)++) |
| #define for_each_sprite(__dev_priv, __p, __s) \ |
| for ((__s) = 0; \ |
| (__s) < INTEL_INFO(__dev_priv)->num_sprites[(__p)]; \ |
| (__s)++) |
| |
| #define for_each_port_masked(__port, __ports_mask) \ |
| for ((__port) = PORT_A; (__port) < I915_MAX_PORTS; (__port)++) \ |
| for_each_if ((__ports_mask) & (1 << (__port))) |
| |
| #define for_each_crtc(dev, crtc) \ |
| list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head) |
| |
| #define for_each_intel_plane(dev, intel_plane) \ |
| list_for_each_entry(intel_plane, \ |
| &(dev)->mode_config.plane_list, \ |
| base.head) |
| |
| #define for_each_intel_plane_mask(dev, intel_plane, plane_mask) \ |
| list_for_each_entry(intel_plane, \ |
| &(dev)->mode_config.plane_list, \ |
| base.head) \ |
| for_each_if ((plane_mask) & \ |
| (1 << drm_plane_index(&intel_plane->base))) |
| |
| #define for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) \ |
| list_for_each_entry(intel_plane, \ |
| &(dev)->mode_config.plane_list, \ |
| base.head) \ |
| for_each_if ((intel_plane)->pipe == (intel_crtc)->pipe) |
| |
| #define for_each_intel_crtc(dev, intel_crtc) \ |
| list_for_each_entry(intel_crtc, \ |
| &(dev)->mode_config.crtc_list, \ |
| base.head) |
| |
| #define for_each_intel_crtc_mask(dev, intel_crtc, crtc_mask) \ |
| list_for_each_entry(intel_crtc, \ |
| &(dev)->mode_config.crtc_list, \ |
| base.head) \ |
| for_each_if ((crtc_mask) & (1 << drm_crtc_index(&intel_crtc->base))) |
| |
| #define for_each_intel_encoder(dev, intel_encoder) \ |
| list_for_each_entry(intel_encoder, \ |
| &(dev)->mode_config.encoder_list, \ |
| base.head) |
| |
| #define for_each_intel_connector_iter(intel_connector, iter) \ |
| while ((intel_connector = to_intel_connector(drm_connector_list_iter_next(iter)))) |
| |
| #define for_each_encoder_on_crtc(dev, __crtc, intel_encoder) \ |
| list_for_each_entry((intel_encoder), &(dev)->mode_config.encoder_list, base.head) \ |
| for_each_if ((intel_encoder)->base.crtc == (__crtc)) |
| |
| #define for_each_connector_on_encoder(dev, __encoder, intel_connector) \ |
| list_for_each_entry((intel_connector), &(dev)->mode_config.connector_list, base.head) \ |
| for_each_if ((intel_connector)->base.encoder == (__encoder)) |
| |
| #define for_each_power_domain(domain, mask) \ |
| for ((domain) = 0; (domain) < POWER_DOMAIN_NUM; (domain)++) \ |
| for_each_if (BIT_ULL(domain) & (mask)) |
| |
| #define for_each_power_well(__dev_priv, __power_well) \ |
| for ((__power_well) = (__dev_priv)->power_domains.power_wells; \ |
| (__power_well) - (__dev_priv)->power_domains.power_wells < \ |
| (__dev_priv)->power_domains.power_well_count; \ |
| (__power_well)++) |
| |
| #define for_each_power_well_rev(__dev_priv, __power_well) \ |
| for ((__power_well) = (__dev_priv)->power_domains.power_wells + \ |
| (__dev_priv)->power_domains.power_well_count - 1; \ |
| (__power_well) - (__dev_priv)->power_domains.power_wells >= 0; \ |
| (__power_well)--) |
| |
| #define for_each_power_domain_well(__dev_priv, __power_well, __domain_mask) \ |
| for_each_power_well(__dev_priv, __power_well) \ |
| for_each_if ((__power_well)->domains & (__domain_mask)) |
| |
| #define for_each_power_domain_well_rev(__dev_priv, __power_well, __domain_mask) \ |
| for_each_power_well_rev(__dev_priv, __power_well) \ |
| for_each_if ((__power_well)->domains & (__domain_mask)) |
| |
| #define for_each_intel_plane_in_state(__state, plane, plane_state, __i) \ |
| for ((__i) = 0; \ |
| (__i) < (__state)->base.dev->mode_config.num_total_plane && \ |
| ((plane) = to_intel_plane((__state)->base.planes[__i].ptr), \ |
| (plane_state) = to_intel_plane_state((__state)->base.planes[__i].state), 1); \ |
| (__i)++) \ |
| for_each_if (plane_state) |
| |
| struct drm_i915_private; |
| struct i915_mm_struct; |
| struct i915_mmu_object; |
| |
| struct drm_i915_file_private { |
| struct drm_i915_private *dev_priv; |
| struct drm_file *file; |
| |
| struct { |
| spinlock_t lock; |
| struct list_head request_list; |
| /* 20ms is a fairly arbitrary limit (greater than the average frame time) |
| * chosen to prevent the CPU getting more than a frame ahead of the GPU |
| * (when using lax throttling for the frontbuffer). We also use it to |
| * offer free GPU waitboosts for severely congested workloads. |
| */ |
| #define DRM_I915_THROTTLE_JIFFIES msecs_to_jiffies(20) |
| } mm; |
| struct idr context_idr; |
| |
| struct intel_rps_client { |
| atomic_t boosts; |
| } rps; |
| |
| unsigned int bsd_engine; |
| |
| /* Client can have a maximum of 3 contexts banned before |
| * it is denied of creating new contexts. As one context |
| * ban needs 4 consecutive hangs, and more if there is |
| * progress in between, this is a last resort stop gap measure |
| * to limit the badly behaving clients access to gpu. |
| */ |
| #define I915_MAX_CLIENT_CONTEXT_BANS 3 |
| atomic_t context_bans; |
| }; |
| |
| /* Used by dp and fdi links */ |
| struct intel_link_m_n { |
| uint32_t tu; |
| uint32_t gmch_m; |
| uint32_t gmch_n; |
| uint32_t link_m; |
| uint32_t link_n; |
| }; |
| |
| void intel_link_compute_m_n(int bpp, int nlanes, |
| int pixel_clock, int link_clock, |
| struct intel_link_m_n *m_n, |
| bool reduce_m_n); |
| |
| /* Interface history: |
| * |
| * 1.1: Original. |
| * 1.2: Add Power Management |
| * 1.3: Add vblank support |
| * 1.4: Fix cmdbuffer path, add heap destroy |
| * 1.5: Add vblank pipe configuration |
| * 1.6: - New ioctl for scheduling buffer swaps on vertical blank |
| * - Support vertical blank on secondary display pipe |
| */ |
| #define DRIVER_MAJOR 1 |
| #define DRIVER_MINOR 6 |
| #define DRIVER_PATCHLEVEL 0 |
| |
| struct opregion_header; |
| struct opregion_acpi; |
| struct opregion_swsci; |
| struct opregion_asle; |
| |
| struct intel_opregion { |
| struct opregion_header *header; |
| struct opregion_acpi *acpi; |
| struct opregion_swsci *swsci; |
| u32 swsci_gbda_sub_functions; |
| u32 swsci_sbcb_sub_functions; |
| struct opregion_asle *asle; |
| void *rvda; |
| void *vbt_firmware; |
| const void *vbt; |
| u32 vbt_size; |
| u32 *lid_state; |
| struct work_struct asle_work; |
| }; |
| #define OPREGION_SIZE (8*1024) |
| |
| struct intel_overlay; |
| struct intel_overlay_error_state; |
| |
| struct sdvo_device_mapping { |
| u8 initialized; |
| u8 dvo_port; |
| u8 slave_addr; |
| u8 dvo_wiring; |
| u8 i2c_pin; |
| u8 ddc_pin; |
| }; |
| |
| struct intel_connector; |
| struct intel_encoder; |
| struct intel_atomic_state; |
| struct intel_crtc_state; |
| struct intel_initial_plane_config; |
| struct intel_crtc; |
| struct intel_limit; |
| struct dpll; |
| struct intel_cdclk_state; |
| |
| struct drm_i915_display_funcs { |
| void (*get_cdclk)(struct drm_i915_private *dev_priv, |
| struct intel_cdclk_state *cdclk_state); |
| void (*set_cdclk)(struct drm_i915_private *dev_priv, |
| const struct intel_cdclk_state *cdclk_state); |
| int (*get_fifo_size)(struct drm_i915_private *dev_priv, int plane); |
| int (*compute_pipe_wm)(struct intel_crtc_state *cstate); |
| int (*compute_intermediate_wm)(struct drm_device *dev, |
| struct intel_crtc *intel_crtc, |
| struct intel_crtc_state *newstate); |
| void (*initial_watermarks)(struct intel_atomic_state *state, |
| struct intel_crtc_state *cstate); |
| void (*atomic_update_watermarks)(struct intel_atomic_state *state, |
| struct intel_crtc_state *cstate); |
| void (*optimize_watermarks)(struct intel_atomic_state *state, |
| struct intel_crtc_state *cstate); |
| int (*compute_global_watermarks)(struct drm_atomic_state *state); |
| void (*update_wm)(struct intel_crtc *crtc); |
| int (*modeset_calc_cdclk)(struct drm_atomic_state *state); |
| /* Returns the active state of the crtc, and if the crtc is active, |
| * fills out the pipe-config with the hw state. */ |
| bool (*get_pipe_config)(struct intel_crtc *, |
| struct intel_crtc_state *); |
| void (*get_initial_plane_config)(struct intel_crtc *, |
| struct intel_initial_plane_config *); |
| int (*crtc_compute_clock)(struct intel_crtc *crtc, |
| struct intel_crtc_state *crtc_state); |
| void (*crtc_enable)(struct intel_crtc_state *pipe_config, |
| struct drm_atomic_state *old_state); |
| void (*crtc_disable)(struct intel_crtc_state *old_crtc_state, |
| struct drm_atomic_state *old_state); |
| void (*update_crtcs)(struct drm_atomic_state *state, |
| unsigned int *crtc_vblank_mask); |
| void (*audio_codec_enable)(struct drm_connector *connector, |
| struct intel_encoder *encoder, |
| const struct drm_display_mode *adjusted_mode); |
| void (*audio_codec_disable)(struct intel_encoder *encoder); |
| void (*fdi_link_train)(struct intel_crtc *crtc, |
| const struct intel_crtc_state *crtc_state); |
| void (*init_clock_gating)(struct drm_i915_private *dev_priv); |
| void (*hpd_irq_setup)(struct drm_i915_private *dev_priv); |
| /* clock updates for mode set */ |
| /* cursor updates */ |
| /* render clock increase/decrease */ |
| /* display clock increase/decrease */ |
| /* pll clock increase/decrease */ |
| |
| void (*load_csc_matrix)(struct drm_crtc_state *crtc_state); |
| void (*load_luts)(struct drm_crtc_state *crtc_state); |
| }; |
| |
| #define CSR_VERSION(major, minor) ((major) << 16 | (minor)) |
| #define CSR_VERSION_MAJOR(version) ((version) >> 16) |
| #define CSR_VERSION_MINOR(version) ((version) & 0xffff) |
| |
| struct intel_csr { |
| struct work_struct work; |
| const char *fw_path; |
| uint32_t *dmc_payload; |
| uint32_t dmc_fw_size; |
| uint32_t version; |
| uint32_t mmio_count; |
| i915_reg_t mmioaddr[8]; |
| uint32_t mmiodata[8]; |
| uint32_t dc_state; |
| uint32_t allowed_dc_mask; |
| }; |
| |
| #define DEV_INFO_FOR_EACH_FLAG(func) \ |
| func(is_mobile); \ |
| func(is_lp); \ |
| func(is_alpha_support); \ |
| /* Keep has_* in alphabetical order */ \ |
| func(has_64bit_reloc); \ |
| func(has_aliasing_ppgtt); \ |
| func(has_csr); \ |
| func(has_ddi); \ |
| func(has_dp_mst); \ |
| func(has_reset_engine); \ |
| func(has_fbc); \ |
| func(has_fpga_dbg); \ |
| func(has_full_ppgtt); \ |
| func(has_full_48bit_ppgtt); \ |
| func(has_gmbus_irq); \ |
| func(has_gmch_display); \ |
| func(has_guc); \ |
| func(has_guc_ct); \ |
| func(has_hotplug); \ |
| func(has_l3_dpf); \ |
| func(has_llc); \ |
| func(has_logical_ring_contexts); \ |
| func(has_overlay); \ |
| func(has_pipe_cxsr); \ |
| func(has_pooled_eu); \ |
| func(has_psr); \ |
| func(has_rc6); \ |
| func(has_rc6p); \ |
| func(has_resource_streamer); \ |
| func(has_runtime_pm); \ |
| func(has_snoop); \ |
| func(unfenced_needs_alignment); \ |
| func(cursor_needs_physical); \ |
| func(hws_needs_physical); \ |
| func(overlay_needs_physical); \ |
| func(supports_tv); |
| |
| struct sseu_dev_info { |
| u8 slice_mask; |
| u8 subslice_mask; |
| u8 eu_total; |
| u8 eu_per_subslice; |
| u8 min_eu_in_pool; |
| /* For each slice, which subslice(s) has(have) 7 EUs (bitfield)? */ |
| u8 subslice_7eu[3]; |
| u8 has_slice_pg:1; |
| u8 has_subslice_pg:1; |
| u8 has_eu_pg:1; |
| }; |
| |
| static inline unsigned int sseu_subslice_total(const struct sseu_dev_info *sseu) |
| { |
| return hweight8(sseu->slice_mask) * hweight8(sseu->subslice_mask); |
| } |
| |
| /* Keep in gen based order, and chronological order within a gen */ |
| enum intel_platform { |
| INTEL_PLATFORM_UNINITIALIZED = 0, |
| INTEL_I830, |
| INTEL_I845G, |
| INTEL_I85X, |
| INTEL_I865G, |
| INTEL_I915G, |
| INTEL_I915GM, |
| INTEL_I945G, |
| INTEL_I945GM, |
| INTEL_G33, |
| INTEL_PINEVIEW, |
| INTEL_I965G, |
| INTEL_I965GM, |
| INTEL_G45, |
| INTEL_GM45, |
| INTEL_IRONLAKE, |
| INTEL_SANDYBRIDGE, |
| INTEL_IVYBRIDGE, |
| INTEL_VALLEYVIEW, |
| INTEL_HASWELL, |
| INTEL_BROADWELL, |
| INTEL_CHERRYVIEW, |
| INTEL_SKYLAKE, |
| INTEL_BROXTON, |
| INTEL_KABYLAKE, |
| INTEL_GEMINILAKE, |
| INTEL_COFFEELAKE, |
| INTEL_CANNONLAKE, |
| INTEL_MAX_PLATFORMS |
| }; |
| |
| struct intel_device_info { |
| u32 display_mmio_offset; |
| u16 device_id; |
| u8 num_pipes; |
| u8 num_sprites[I915_MAX_PIPES]; |
| u8 num_scalers[I915_MAX_PIPES]; |
| u8 gen; |
| u16 gen_mask; |
| enum intel_platform platform; |
| u8 gt; /* GT number, 0 if undefined */ |
| u8 ring_mask; /* Rings supported by the HW */ |
| u8 num_rings; |
| #define DEFINE_FLAG(name) u8 name:1 |
| DEV_INFO_FOR_EACH_FLAG(DEFINE_FLAG); |
| #undef DEFINE_FLAG |
| u16 ddb_size; /* in blocks */ |
| /* Register offsets for the various display pipes and transcoders */ |
| int pipe_offsets[I915_MAX_TRANSCODERS]; |
| int trans_offsets[I915_MAX_TRANSCODERS]; |
| int palette_offsets[I915_MAX_PIPES]; |
| int cursor_offsets[I915_MAX_PIPES]; |
| |
| /* Slice/subslice/EU info */ |
| struct sseu_dev_info sseu; |
| |
| struct color_luts { |
| u16 degamma_lut_size; |
| u16 gamma_lut_size; |
| } color; |
| }; |
| |
| struct intel_display_error_state; |
| |
| struct i915_gpu_state { |
| struct kref ref; |
| struct timeval time; |
| struct timeval boottime; |
| struct timeval uptime; |
| |
| struct drm_i915_private *i915; |
| |
| char error_msg[128]; |
| bool simulated; |
| bool awake; |
| bool wakelock; |
| bool suspended; |
| int iommu; |
| u32 reset_count; |
| u32 suspend_count; |
| struct intel_device_info device_info; |
| struct i915_params params; |
| |
| /* Generic register state */ |
| u32 eir; |
| u32 pgtbl_er; |
| u32 ier; |
| u32 gtier[4], ngtier; |
| u32 ccid; |
| u32 derrmr; |
| u32 forcewake; |
| u32 error; /* gen6+ */ |
| u32 err_int; /* gen7 */ |
| u32 fault_data0; /* gen8, gen9 */ |
| u32 fault_data1; /* gen8, gen9 */ |
| u32 done_reg; |
| u32 gac_eco; |
| u32 gam_ecochk; |
| u32 gab_ctl; |
| u32 gfx_mode; |
| |
| u32 nfence; |
| u64 fence[I915_MAX_NUM_FENCES]; |
| struct intel_overlay_error_state *overlay; |
| struct intel_display_error_state *display; |
| struct drm_i915_error_object *semaphore; |
| struct drm_i915_error_object *guc_log; |
| |
| struct drm_i915_error_engine { |
| int engine_id; |
| /* Software tracked state */ |
| bool waiting; |
| int num_waiters; |
| unsigned long hangcheck_timestamp; |
| bool hangcheck_stalled; |
| enum intel_engine_hangcheck_action hangcheck_action; |
| struct i915_address_space *vm; |
| int num_requests; |
| u32 reset_count; |
| |
| /* position of active request inside the ring */ |
| u32 rq_head, rq_post, rq_tail; |
| |
| /* our own tracking of ring head and tail */ |
| u32 cpu_ring_head; |
| u32 cpu_ring_tail; |
| |
| u32 last_seqno; |
| |
| /* Register state */ |
| u32 start; |
| u32 tail; |
| u32 head; |
| u32 ctl; |
| u32 mode; |
| u32 hws; |
| u32 ipeir; |
| u32 ipehr; |
| u32 bbstate; |
| u32 instpm; |
| u32 instps; |
| u32 seqno; |
| u64 bbaddr; |
| u64 acthd; |
| u32 fault_reg; |
| u64 faddr; |
| u32 rc_psmi; /* sleep state */ |
| u32 semaphore_mboxes[I915_NUM_ENGINES - 1]; |
| struct intel_instdone instdone; |
| |
| struct drm_i915_error_context { |
| char comm[TASK_COMM_LEN]; |
| pid_t pid; |
| u32 handle; |
| u32 hw_id; |
| int ban_score; |
| int active; |
| int guilty; |
| } context; |
| |
| struct drm_i915_error_object { |
| u64 gtt_offset; |
| u64 gtt_size; |
| int page_count; |
| int unused; |
| u32 *pages[0]; |
| } *ringbuffer, *batchbuffer, *wa_batchbuffer, *ctx, *hws_page; |
| |
| struct drm_i915_error_object **user_bo; |
| long user_bo_count; |
| |
| struct drm_i915_error_object *wa_ctx; |
| |
| struct drm_i915_error_request { |
| long jiffies; |
| pid_t pid; |
| u32 context; |
| int ban_score; |
| u32 seqno; |
| u32 head; |
| u32 tail; |
| } *requests, execlist[2]; |
| |
| struct drm_i915_error_waiter { |
| char comm[TASK_COMM_LEN]; |
| pid_t pid; |
| u32 seqno; |
| } *waiters; |
| |
| struct { |
| u32 gfx_mode; |
| union { |
| u64 pdp[4]; |
| u32 pp_dir_base; |
| }; |
| } vm_info; |
| } engine[I915_NUM_ENGINES]; |
| |
| struct drm_i915_error_buffer { |
| u32 size; |
| u32 name; |
| u32 rseqno[I915_NUM_ENGINES], wseqno; |
| u64 gtt_offset; |
| u32 read_domains; |
| u32 write_domain; |
| s32 fence_reg:I915_MAX_NUM_FENCE_BITS; |
| u32 tiling:2; |
| u32 dirty:1; |
| u32 purgeable:1; |
| u32 userptr:1; |
| s32 engine:4; |
| u32 cache_level:3; |
| } *active_bo[I915_NUM_ENGINES], *pinned_bo; |
| u32 active_bo_count[I915_NUM_ENGINES], pinned_bo_count; |
| struct i915_address_space *active_vm[I915_NUM_ENGINES]; |
| }; |
| |
| enum i915_cache_level { |
| I915_CACHE_NONE = 0, |
| I915_CACHE_LLC, /* also used for snoopable memory on non-LLC */ |
| I915_CACHE_L3_LLC, /* gen7+, L3 sits between the domain specifc |
| caches, eg sampler/render caches, and the |
| large Last-Level-Cache. LLC is coherent with |
| the CPU, but L3 is only visible to the GPU. */ |
| I915_CACHE_WT, /* hsw:gt3e WriteThrough for scanouts */ |
| }; |
| |
| #define I915_COLOR_UNEVICTABLE (-1) /* a non-vma sharing the address space */ |
| |
| enum fb_op_origin { |
| ORIGIN_GTT, |
| ORIGIN_CPU, |
| ORIGIN_CS, |
| ORIGIN_FLIP, |
| ORIGIN_DIRTYFB, |
| }; |
| |
| struct intel_fbc { |
| /* This is always the inner lock when overlapping with struct_mutex and |
| * it's the outer lock when overlapping with stolen_lock. */ |
| struct mutex lock; |
| unsigned threshold; |
| unsigned int possible_framebuffer_bits; |
| unsigned int busy_bits; |
| unsigned int visible_pipes_mask; |
| struct intel_crtc *crtc; |
| |
| struct drm_mm_node compressed_fb; |
| struct drm_mm_node *compressed_llb; |
| |
| bool false_color; |
| |
| bool enabled; |
| bool active; |
| |
| bool underrun_detected; |
| struct work_struct underrun_work; |
| |
| /* |
| * Due to the atomic rules we can't access some structures without the |
| * appropriate locking, so we cache information here in order to avoid |
| * these problems. |
| */ |
| struct intel_fbc_state_cache { |
| struct i915_vma *vma; |
| |
| struct { |
| unsigned int mode_flags; |
| uint32_t hsw_bdw_pixel_rate; |
| } crtc; |
| |
| struct { |
| unsigned int rotation; |
| int src_w; |
| int src_h; |
| bool visible; |
| } plane; |
| |
| struct { |
| const struct drm_format_info *format; |
| unsigned int stride; |
| } fb; |
| } state_cache; |
| |
| /* |
| * This structure contains everything that's relevant to program the |
| * hardware registers. When we want to figure out if we need to disable |
| * and re-enable FBC for a new configuration we just check if there's |
| * something different in the struct. The genx_fbc_activate functions |
| * are supposed to read from it in order to program the registers. |
| */ |
| struct intel_fbc_reg_params { |
| struct i915_vma *vma; |
| |
| struct { |
| enum pipe pipe; |
| enum plane plane; |
| unsigned int fence_y_offset; |
| } crtc; |
| |
| struct { |
| const struct drm_format_info *format; |
| unsigned int stride; |
| } fb; |
| |
| int cfb_size; |
| } params; |
| |
| struct intel_fbc_work { |
| bool scheduled; |
| u32 scheduled_vblank; |
| struct work_struct work; |
| } work; |
| |
| const char *no_fbc_reason; |
| }; |
| |
| /* |
| * HIGH_RR is the highest eDP panel refresh rate read from EDID |
| * LOW_RR is the lowest eDP panel refresh rate found from EDID |
| * parsing for same resolution. |
| */ |
| enum drrs_refresh_rate_type { |
| DRRS_HIGH_RR, |
| DRRS_LOW_RR, |
| DRRS_MAX_RR, /* RR count */ |
| }; |
| |
| enum drrs_support_type { |
| DRRS_NOT_SUPPORTED = 0, |
| STATIC_DRRS_SUPPORT = 1, |
| SEAMLESS_DRRS_SUPPORT = 2 |
| }; |
| |
| struct intel_dp; |
| struct i915_drrs { |
| struct mutex mutex; |
| struct delayed_work work; |
| struct intel_dp *dp; |
| unsigned busy_frontbuffer_bits; |
| enum drrs_refresh_rate_type refresh_rate_type; |
| enum drrs_support_type type; |
| }; |
| |
| struct i915_psr { |
| struct mutex lock; |
| bool sink_support; |
| bool source_ok; |
| struct intel_dp *enabled; |
| bool active; |
| struct delayed_work work; |
| unsigned busy_frontbuffer_bits; |
| bool psr2_support; |
| bool aux_frame_sync; |
| bool link_standby; |
| bool y_cord_support; |
| bool colorimetry_support; |
| bool alpm; |
| }; |
| |
| enum intel_pch { |
| PCH_NONE = 0, /* No PCH present */ |
| PCH_IBX, /* Ibexpeak PCH */ |
| PCH_CPT, /* Cougarpoint/Pantherpoint PCH */ |
| PCH_LPT, /* Lynxpoint/Wildcatpoint PCH */ |
| PCH_SPT, /* Sunrisepoint PCH */ |
| PCH_KBP, /* Kaby Lake PCH */ |
| PCH_CNP, /* Cannon Lake PCH */ |
| PCH_NOP, |
| }; |
| |
| enum intel_sbi_destination { |
| SBI_ICLK, |
| SBI_MPHY, |
| }; |
| |
| #define QUIRK_LVDS_SSC_DISABLE (1<<1) |
| #define QUIRK_INVERT_BRIGHTNESS (1<<2) |
| #define QUIRK_BACKLIGHT_PRESENT (1<<3) |
| #define QUIRK_PIN_SWIZZLED_PAGES (1<<5) |
| #define QUIRK_INCREASE_T12_DELAY (1<<6) |
| #define QUIRK_INCREASE_DDI_DISABLED_TIME (1<<7) |
| |
| struct intel_fbdev; |
| struct intel_fbc_work; |
| |
| struct intel_gmbus { |
| struct i2c_adapter adapter; |
| #define GMBUS_FORCE_BIT_RETRY (1U << 31) |
| u32 force_bit; |
| u32 reg0; |
| i915_reg_t gpio_reg; |
| struct i2c_algo_bit_data bit_algo; |
| struct drm_i915_private *dev_priv; |
| }; |
| |
| struct i915_suspend_saved_registers { |
| u32 saveDSPARB; |
| u32 saveFBC_CONTROL; |
| u32 saveCACHE_MODE_0; |
| u32 saveMI_ARB_STATE; |
| u32 saveSWF0[16]; |
| u32 saveSWF1[16]; |
| u32 saveSWF3[3]; |
| uint64_t saveFENCE[I915_MAX_NUM_FENCES]; |
| u32 savePCH_PORT_HOTPLUG; |
| u16 saveGCDGMBUS; |
| }; |
| |
| struct vlv_s0ix_state { |
| /* GAM */ |
| u32 wr_watermark; |
| u32 gfx_prio_ctrl; |
| u32 arb_mode; |
| u32 gfx_pend_tlb0; |
| u32 gfx_pend_tlb1; |
| u32 lra_limits[GEN7_LRA_LIMITS_REG_NUM]; |
| u32 media_max_req_count; |
| u32 gfx_max_req_count; |
| u32 render_hwsp; |
| u32 ecochk; |
| u32 bsd_hwsp; |
| u32 blt_hwsp; |
| u32 tlb_rd_addr; |
| |
| /* MBC */ |
| u32 g3dctl; |
| u32 gsckgctl; |
| u32 mbctl; |
| |
| /* GCP */ |
| u32 ucgctl1; |
| u32 ucgctl3; |
| u32 rcgctl1; |
| u32 rcgctl2; |
| u32 rstctl; |
| u32 misccpctl; |
| |
| /* GPM */ |
| u32 gfxpause; |
| u32 rpdeuhwtc; |
| u32 rpdeuc; |
| u32 ecobus; |
| u32 pwrdwnupctl; |
| u32 rp_down_timeout; |
| u32 rp_deucsw; |
| u32 rcubmabdtmr; |
| u32 rcedata; |
| u32 spare2gh; |
| |
| /* Display 1 CZ domain */ |
| u32 gt_imr; |
| u32 gt_ier; |
| u32 pm_imr; |
| u32 pm_ier; |
| u32 gt_scratch[GEN7_GT_SCRATCH_REG_NUM]; |
| |
| /* GT SA CZ domain */ |
| u32 tilectl; |
| u32 gt_fifoctl; |
| u32 gtlc_wake_ctrl; |
| u32 gtlc_survive; |
| u32 pmwgicz; |
| |
| /* Display 2 CZ domain */ |
| u32 gu_ctl0; |
| u32 gu_ctl1; |
| u32 pcbr; |
| u32 clock_gate_dis2; |
| }; |
| |
| struct intel_rps_ei { |
| ktime_t ktime; |
| u32 render_c0; |
| u32 media_c0; |
| }; |
| |
| struct intel_gen6_power_mgmt { |
| /* |
| * work, interrupts_enabled and pm_iir are protected by |
| * dev_priv->irq_lock |
| */ |
| struct work_struct work; |
| bool interrupts_enabled; |
| u32 pm_iir; |
| |
| /* PM interrupt bits that should never be masked */ |
| u32 pm_intrmsk_mbz; |
| |
| /* Frequencies are stored in potentially platform dependent multiples. |
| * In other words, *_freq needs to be multiplied by X to be interesting. |
| * Soft limits are those which are used for the dynamic reclocking done |
| * by the driver (raise frequencies under heavy loads, and lower for |
| * lighter loads). Hard limits are those imposed by the hardware. |
| * |
| * A distinction is made for overclocking, which is never enabled by |
| * default, and is considered to be above the hard limit if it's |
| * possible at all. |
| */ |
| u8 cur_freq; /* Current frequency (cached, may not == HW) */ |
| u8 min_freq_softlimit; /* Minimum frequency permitted by the driver */ |
| u8 max_freq_softlimit; /* Max frequency permitted by the driver */ |
| u8 max_freq; /* Maximum frequency, RP0 if not overclocking */ |
| u8 min_freq; /* AKA RPn. Minimum frequency */ |
| u8 boost_freq; /* Frequency to request when wait boosting */ |
| u8 idle_freq; /* Frequency to request when we are idle */ |
| u8 efficient_freq; /* AKA RPe. Pre-determined balanced frequency */ |
| u8 rp1_freq; /* "less than" RP0 power/freqency */ |
| u8 rp0_freq; /* Non-overclocked max frequency. */ |
| u16 gpll_ref_freq; /* vlv/chv GPLL reference frequency */ |
| |
| u8 up_threshold; /* Current %busy required to uplock */ |
| u8 down_threshold; /* Current %busy required to downclock */ |
| |
| int last_adj; |
| enum { LOW_POWER, BETWEEN, HIGH_POWER } power; |
| |
| bool enabled; |
| struct delayed_work autoenable_work; |
| atomic_t num_waiters; |
| atomic_t boosts; |
| |
| /* manual wa residency calculations */ |
| struct intel_rps_ei ei; |
| |
| /* |
| * Protects RPS/RC6 register access and PCU communication. |
| * Must be taken after struct_mutex if nested. Note that |
| * this lock may be held for long periods of time when |
| * talking to hw - so only take it when talking to hw! |
| */ |
| struct mutex hw_lock; |
| }; |
| |
| /* defined intel_pm.c */ |
| extern spinlock_t mchdev_lock; |
| |
| struct intel_ilk_power_mgmt { |
| u8 cur_delay; |
| u8 min_delay; |
| u8 max_delay; |
| u8 fmax; |
| u8 fstart; |
| |
| u64 last_count1; |
| unsigned long last_time1; |
| unsigned long chipset_power; |
| u64 last_count2; |
| u64 last_time2; |
| unsigned long gfx_power; |
| u8 corr; |
| |
| int c_m; |
| int r_t; |
| }; |
| |
| struct drm_i915_private; |
| struct i915_power_well; |
| |
| struct i915_power_well_ops { |
| /* |
| * Synchronize the well's hw state to match the current sw state, for |
| * example enable/disable it based on the current refcount. Called |
| * during driver init and resume time, possibly after first calling |
| * the enable/disable handlers. |
| */ |
| void (*sync_hw)(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well); |
| /* |
| * Enable the well and resources that depend on it (for example |
| * interrupts located on the well). Called after the 0->1 refcount |
| * transition. |
| */ |
| void (*enable)(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well); |
| /* |
| * Disable the well and resources that depend on it. Called after |
| * the 1->0 refcount transition. |
| */ |
| void (*disable)(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well); |
| /* Returns the hw enabled state. */ |
| bool (*is_enabled)(struct drm_i915_private *dev_priv, |
| struct i915_power_well *power_well); |
| }; |
| |
| /* Power well structure for haswell */ |
| struct i915_power_well { |
| const char *name; |
| bool always_on; |
| /* power well enable/disable usage count */ |
| int count; |
| /* cached hw enabled state */ |
| bool hw_enabled; |
| u64 domains; |
| /* unique identifier for this power well */ |
| enum i915_power_well_id id; |
| /* |
| * Arbitraty data associated with this power well. Platform and power |
| * well specific. |
| */ |
| union { |
| struct { |
| enum dpio_phy phy; |
| } bxt; |
| struct { |
| /* Mask of pipes whose IRQ logic is backed by the pw */ |
| u8 irq_pipe_mask; |
| /* The pw is backing the VGA functionality */ |
| bool has_vga:1; |
| bool has_fuses:1; |
| } hsw; |
| }; |
| const struct i915_power_well_ops *ops; |
| }; |
| |
| struct i915_power_domains { |
| /* |
| * Power wells needed for initialization at driver init and suspend |
| * time are on. They are kept on until after the first modeset. |
| */ |
| bool init_power_on; |
| bool initializing; |
| int power_well_count; |
| |
| struct mutex lock; |
| int domain_use_count[POWER_DOMAIN_NUM]; |
| struct i915_power_well *power_wells; |
| }; |
| |
| #define MAX_L3_SLICES 2 |
| struct intel_l3_parity { |
| u32 *remap_info[MAX_L3_SLICES]; |
| struct work_struct error_work; |
| int which_slice; |
| }; |
| |
| struct i915_gem_mm { |
| /** Memory allocator for GTT stolen memory */ |
| struct drm_mm stolen; |
| /** Protects the usage of the GTT stolen memory allocator. This is |
| * always the inner lock when overlapping with struct_mutex. */ |
| struct mutex stolen_lock; |
| |
| /** List of all objects in gtt_space. Used to restore gtt |
| * mappings on resume */ |
| struct list_head bound_list; |
| /** |
| * List of objects which are not bound to the GTT (thus |
| * are idle and not used by the GPU). These objects may or may |
| * not actually have any pages attached. |
| */ |
| struct list_head unbound_list; |
| |
| /** List of all objects in gtt_space, currently mmaped by userspace. |
| * All objects within this list must also be on bound_list. |
| */ |
| struct list_head userfault_list; |
| |
| /** |
| * List of objects which are pending destruction. |
| */ |
| struct llist_head free_list; |
| struct work_struct free_work; |
| |
| /** Usable portion of the GTT for GEM */ |
| dma_addr_t stolen_base; /* limited to low memory (32-bit) */ |
| |
| /** PPGTT used for aliasing the PPGTT with the GTT */ |
| struct i915_hw_ppgtt *aliasing_ppgtt; |
| |
| struct notifier_block oom_notifier; |
| struct notifier_block vmap_notifier; |
| struct shrinker shrinker; |
| |
| /** LRU list of objects with fence regs on them. */ |
| struct list_head fence_list; |
| |
| /** |
| * Workqueue to fault in userptr pages, flushed by the execbuf |
| * when required but otherwise left to userspace to try again |
| * on EAGAIN. |
| */ |
| struct workqueue_struct *userptr_wq; |
| |
| u64 unordered_timeline; |
| |
| /* the indicator for dispatch video commands on two BSD rings */ |
| atomic_t bsd_engine_dispatch_index; |
| |
| /** Bit 6 swizzling required for X tiling */ |
| uint32_t bit_6_swizzle_x; |
| /** Bit 6 swizzling required for Y tiling */ |
| uint32_t bit_6_swizzle_y; |
| |
| /* accounting, useful for userland debugging */ |
| spinlock_t object_stat_lock; |
| u64 object_memory; |
| u32 object_count; |
| }; |
| |
| struct drm_i915_error_state_buf { |
| struct drm_i915_private *i915; |
| unsigned bytes; |
| unsigned size; |
| int err; |
| u8 *buf; |
| loff_t start; |
| loff_t pos; |
| }; |
| |
| #define I915_RESET_TIMEOUT (10 * HZ) /* 10s */ |
| #define I915_FENCE_TIMEOUT (10 * HZ) /* 10s */ |
| |
| #define I915_ENGINE_DEAD_TIMEOUT (4 * HZ) /* Seqno, head and subunits dead */ |
| #define I915_SEQNO_DEAD_TIMEOUT (12 * HZ) /* Seqno dead with active head */ |
| |
| struct i915_gpu_error { |
| /* For hangcheck timer */ |
| #define DRM_I915_HANGCHECK_PERIOD 1500 /* in ms */ |
| #define DRM_I915_HANGCHECK_JIFFIES msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD) |
| |
| struct delayed_work hangcheck_work; |
| |
| /* For reset and error_state handling. */ |
| spinlock_t lock; |
| /* Protected by the above dev->gpu_error.lock. */ |
| struct i915_gpu_state *first_error; |
| |
| atomic_t pending_fb_pin; |
| |
| unsigned long missed_irq_rings; |
| |
| /** |
| * State variable controlling the reset flow and count |
| * |
| * This is a counter which gets incremented when reset is triggered, |
| * |
| * Before the reset commences, the I915_RESET_BACKOFF bit is set |
| * meaning that any waiters holding onto the struct_mutex should |
| * relinquish the lock immediately in order for the reset to start. |
| * |
| * If reset is not completed succesfully, the I915_WEDGE bit is |
| * set meaning that hardware is terminally sour and there is no |
| * recovery. All waiters on the reset_queue will be woken when |
| * that happens. |
| * |
| * This counter is used by the wait_seqno code to notice that reset |
| * event happened and it needs to restart the entire ioctl (since most |
| * likely the seqno it waited for won't ever signal anytime soon). |
| * |
| * This is important for lock-free wait paths, where no contended lock |
| * naturally enforces the correct ordering between the bail-out of the |
| * waiter and the gpu reset work code. |
| */ |
| unsigned long reset_count; |
| |
| /** |
| * flags: Control various stages of the GPU reset |
| * |
| * #I915_RESET_BACKOFF - When we start a reset, we want to stop any |
| * other users acquiring the struct_mutex. To do this we set the |
| * #I915_RESET_BACKOFF bit in the error flags when we detect a reset |
| * and then check for that bit before acquiring the struct_mutex (in |
| * i915_mutex_lock_interruptible()?). I915_RESET_BACKOFF serves a |
| * secondary role in preventing two concurrent global reset attempts. |
| * |
| * #I915_RESET_HANDOFF - To perform the actual GPU reset, we need the |
| * struct_mutex. We try to acquire the struct_mutex in the reset worker, |
| * but it may be held by some long running waiter (that we cannot |
| * interrupt without causing trouble). Once we are ready to do the GPU |
| * reset, we set the I915_RESET_HANDOFF bit and wakeup any waiters. If |
| * they already hold the struct_mutex and want to participate they can |
| * inspect the bit and do the reset directly, otherwise the worker |
| * waits for the struct_mutex. |
| * |
| * #I915_RESET_ENGINE[num_engines] - Since the driver doesn't need to |
| * acquire the struct_mutex to reset an engine, we need an explicit |
| * flag to prevent two concurrent reset attempts in the same engine. |
| * As the number of engines continues to grow, allocate the flags from |
| * the most significant bits. |
| * |
| * #I915_WEDGED - If reset fails and we can no longer use the GPU, |
| * we set the #I915_WEDGED bit. Prior to command submission, e.g. |
| * i915_gem_request_alloc(), this bit is checked and the sequence |
| * aborted (with -EIO reported to userspace) if set. |
| */ |
| unsigned long flags; |
| #define I915_RESET_BACKOFF 0 |
| #define I915_RESET_HANDOFF 1 |
| #define I915_RESET_MODESET 2 |
| #define I915_WEDGED (BITS_PER_LONG - 1) |
| #define I915_RESET_ENGINE (I915_WEDGED - I915_NUM_ENGINES) |
| |
| /** Number of times an engine has been reset */ |
| u32 reset_engine_count[I915_NUM_ENGINES]; |
| |
| /** |
| * Waitqueue to signal when a hang is detected. Used to for waiters |
| * to release the struct_mutex for the reset to procede. |
| */ |
| wait_queue_head_t wait_queue; |
| |
| /** |
| * Waitqueue to signal when the reset has completed. Used by clients |
| * that wait for dev_priv->mm.wedged to settle. |
| */ |
| wait_queue_head_t reset_queue; |
| |
| /* For missed irq/seqno simulation. */ |
| unsigned long test_irq_rings; |
| }; |
| |
| #define DP_AUX_A 0x40 |
| #define DP_AUX_B 0x10 |
| #define DP_AUX_C 0x20 |
| #define DP_AUX_D 0x30 |
| |
| #define DDC_PIN_B 0x05 |
| #define DDC_PIN_C 0x04 |
| #define DDC_PIN_D 0x06 |
| |
| struct ddi_vbt_port_info { |
| /* |
| * This is an index in the HDMI/DVI DDI buffer translation table. |
| * The special value HDMI_LEVEL_SHIFT_UNKNOWN means the VBT didn't |
| * populate this field. |
| */ |
| #define HDMI_LEVEL_SHIFT_UNKNOWN 0xff |
| uint8_t hdmi_level_shift; |
| |
| uint8_t supports_dvi:1; |
| uint8_t supports_hdmi:1; |
| uint8_t supports_dp:1; |
| uint8_t supports_edp:1; |
| |
| uint8_t alternate_aux_channel; |
| uint8_t alternate_ddc_pin; |
| |
| uint8_t dp_boost_level; |
| uint8_t hdmi_boost_level; |
| }; |
| |
| enum psr_lines_to_wait { |
| PSR_0_LINES_TO_WAIT = 0, |
| PSR_1_LINE_TO_WAIT, |
| PSR_4_LINES_TO_WAIT, |
| PSR_8_LINES_TO_WAIT |
| }; |
| |
| struct intel_vbt_data { |
| struct drm_display_mode *lfp_lvds_vbt_mode; /* if any */ |
| struct drm_display_mode *sdvo_lvds_vbt_mode; /* if any */ |
| |
| /* Feature bits */ |
| unsigned int int_tv_support:1; |
| unsigned int lvds_dither:1; |
| unsigned int lvds_vbt:1; |
| unsigned int int_crt_support:1; |
| unsigned int lvds_use_ssc:1; |
| unsigned int display_clock_mode:1; |
| unsigned int fdi_rx_polarity_inverted:1; |
| unsigned int panel_type:4; |
| int lvds_ssc_freq; |
| unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */ |
| |
| enum drrs_support_type drrs_type; |
| |
| struct { |
| int rate; |
| int lanes; |
| int preemphasis; |
| int vswing; |
| bool low_vswing; |
| bool initialized; |
| bool support; |
| int bpp; |
| struct edp_power_seq pps; |
| } edp; |
| |
| struct { |
| bool full_link; |
| bool require_aux_wakeup; |
| int idle_frames; |
| enum psr_lines_to_wait lines_to_wait; |
| int tp1_wakeup_time; |
| int tp2_tp3_wakeup_time; |
| } psr; |
| |
| struct { |
| u16 pwm_freq_hz; |
| bool present; |
| bool active_low_pwm; |
| u8 min_brightness; /* min_brightness/255 of max */ |
| u8 controller; /* brightness controller number */ |
| enum intel_backlight_type type; |
| } backlight; |
| |
| /* MIPI DSI */ |
| struct { |
| u16 panel_id; |
| struct mipi_config *config; |
| struct mipi_pps_data *pps; |
| u8 seq_version; |
| u32 size; |
| u8 *data; |
| const u8 *sequence[MIPI_SEQ_MAX]; |
| } dsi; |
| |
| int crt_ddc_pin; |
| |
| int child_dev_num; |
| union child_device_config *child_dev; |
| |
| struct ddi_vbt_port_info ddi_port_info[I915_MAX_PORTS]; |
| struct sdvo_device_mapping sdvo_mappings[2]; |
| }; |
| |
| enum intel_ddb_partitioning { |
| INTEL_DDB_PART_1_2, |
| INTEL_DDB_PART_5_6, /* IVB+ */ |
| }; |
| |
| struct intel_wm_level { |
| bool enable; |
| uint32_t pri_val; |
| uint32_t spr_val; |
| uint32_t cur_val; |
| uint32_t fbc_val; |
| }; |
| |
| struct ilk_wm_values { |
| uint32_t wm_pipe[3]; |
| uint32_t wm_lp[3]; |
| uint32_t wm_lp_spr[3]; |
| uint32_t wm_linetime[3]; |
| bool enable_fbc_wm; |
| enum intel_ddb_partitioning partitioning; |
| }; |
| |
| struct g4x_pipe_wm { |
| uint16_t plane[I915_MAX_PLANES]; |
| uint16_t fbc; |
| }; |
| |
| struct g4x_sr_wm { |
| uint16_t plane; |
| uint16_t cursor; |
| uint16_t fbc; |
| }; |
| |
| struct vlv_wm_ddl_values { |
| uint8_t plane[I915_MAX_PLANES]; |
| }; |
| |
| struct vlv_wm_values { |
| struct g4x_pipe_wm pipe[3]; |
| struct g4x_sr_wm sr; |
| struct vlv_wm_ddl_values ddl[3]; |
| uint8_t level; |
| bool cxsr; |
| }; |
| |
| struct g4x_wm_values { |
| struct g4x_pipe_wm pipe[2]; |
| struct g4x_sr_wm sr; |
| struct g4x_sr_wm hpll; |
| bool cxsr; |
| bool hpll_en; |
| bool fbc_en; |
| }; |
| |
| struct skl_ddb_entry { |
| uint16_t start, end; /* in number of blocks, 'end' is exclusive */ |
| }; |
| |
| static inline uint16_t skl_ddb_entry_size(const struct skl_ddb_entry *entry) |
| { |
| return entry->end - entry->start; |
| } |
| |
| static inline bool skl_ddb_entry_equal(const struct skl_ddb_entry *e1, |
| const struct skl_ddb_entry *e2) |
| { |
| if (e1->start == e2->start && e1->end == e2->end) |
| return true; |
| |
| return false; |
| } |
| |
| struct skl_ddb_allocation { |
| struct skl_ddb_entry plane[I915_MAX_PIPES][I915_MAX_PLANES]; /* packed/uv */ |
| struct skl_ddb_entry y_plane[I915_MAX_PIPES][I915_MAX_PLANES]; |
| }; |
| |
| struct skl_wm_values { |
| unsigned dirty_pipes; |
| struct skl_ddb_allocation ddb; |
| }; |
| |
| struct skl_wm_level { |
| bool plane_en; |
| uint16_t plane_res_b; |
| uint8_t plane_res_l; |
| }; |
| |
| /* |
| * This struct helps tracking the state needed for runtime PM, which puts the |
| * device in PCI D3 state. Notice that when this happens, nothing on the |
| * graphics device works, even register access, so we don't get interrupts nor |
| * anything else. |
| * |
| * Every piece of our code that needs to actually touch the hardware needs to |
| * either call intel_runtime_pm_get or call intel_display_power_get with the |
| * appropriate power domain. |
| * |
| * Our driver uses the autosuspend delay feature, which means we'll only really |
| * suspend if we stay with zero refcount for a certain amount of time. The |
| * default value is currently very conservative (see intel_runtime_pm_enable), but |
| * it can be changed with the standard runtime PM files from sysfs. |
| * |
| * The irqs_disabled variable becomes true exactly after we disable the IRQs and |
| * goes back to false exactly before we reenable the IRQs. We use this variable |
| * to check if someone is trying to enable/disable IRQs while they're supposed |
| * to be disabled. This shouldn't happen and we'll print some error messages in |
| * case it happens. |
| * |
| * For more, read the Documentation/power/runtime_pm.txt. |
| */ |
| struct i915_runtime_pm { |
| atomic_t wakeref_count; |
| bool suspended; |
| bool irqs_enabled; |
| }; |
| |
| enum intel_pipe_crc_source { |
| INTEL_PIPE_CRC_SOURCE_NONE, |
| INTEL_PIPE_CRC_SOURCE_PLANE1, |
| INTEL_PIPE_CRC_SOURCE_PLANE2, |
| INTEL_PIPE_CRC_SOURCE_PF, |
| INTEL_PIPE_CRC_SOURCE_PIPE, |
| /* TV/DP on pre-gen5/vlv can't use the pipe source. */ |
| INTEL_PIPE_CRC_SOURCE_TV, |
| INTEL_PIPE_CRC_SOURCE_DP_B, |
| INTEL_PIPE_CRC_SOURCE_DP_C, |
| INTEL_PIPE_CRC_SOURCE_DP_D, |
| INTEL_PIPE_CRC_SOURCE_AUTO, |
| INTEL_PIPE_CRC_SOURCE_MAX, |
| }; |
| |
| struct intel_pipe_crc_entry { |
| uint32_t frame; |
| uint32_t crc[5]; |
| }; |
| |
| #define INTEL_PIPE_CRC_ENTRIES_NR 128 |
| struct intel_pipe_crc { |
| spinlock_t lock; |
| bool opened; /* exclusive access to the result file */ |
| struct intel_pipe_crc_entry *entries; |
| enum intel_pipe_crc_source source; |
| int head, tail; |
| wait_queue_head_t wq; |
| int skipped; |
| }; |
| |
| struct i915_frontbuffer_tracking { |
| spinlock_t lock; |
| |
| /* |
| * Tracking bits for delayed frontbuffer flushing du to gpu activity or |
| * scheduled flips. |
| */ |
| unsigned busy_bits; |
| unsigned flip_bits; |
| }; |
| |
| struct i915_wa_reg { |
| i915_reg_t addr; |
| u32 value; |
| /* bitmask representing WA bits */ |
| u32 mask; |
| }; |
| |
| /* |
| * RING_MAX_NONPRIV_SLOTS is per-engine but at this point we are only |
| * allowing it for RCS as we don't foresee any requirement of having |
| * a whitelist for other engines. When it is really required for |
| * other engines then the limit need to be increased. |
| */ |
| #define I915_MAX_WA_REGS (16 + RING_MAX_NONPRIV_SLOTS) |
| |
| struct i915_workarounds { |
| struct i915_wa_reg reg[I915_MAX_WA_REGS]; |
| u32 count; |
| u32 hw_whitelist_count[I915_NUM_ENGINES]; |
| }; |
| |
| struct i915_virtual_gpu { |
| bool active; |
| u32 caps; |
| }; |
| |
| /* used in computing the new watermarks state */ |
| struct intel_wm_config { |
| unsigned int num_pipes_active; |
| bool sprites_enabled; |
| bool sprites_scaled; |
| }; |
| |
| struct i915_oa_format { |
| u32 format; |
| int size; |
| }; |
| |
| struct i915_oa_reg { |
| i915_reg_t addr; |
| u32 value; |
| }; |
| |
| struct i915_oa_config { |
| char uuid[UUID_STRING_LEN + 1]; |
| int id; |
| |
| const struct i915_oa_reg *mux_regs; |
| u32 mux_regs_len; |
| const struct i915_oa_reg *b_counter_regs; |
| u32 b_counter_regs_len; |
| const struct i915_oa_reg *flex_regs; |
| u32 flex_regs_len; |
| |
| struct attribute_group sysfs_metric; |
| struct attribute *attrs[2]; |
| struct device_attribute sysfs_metric_id; |
| |
| atomic_t ref_count; |
| }; |
| |
| struct i915_perf_stream; |
| |
| /** |
| * struct i915_perf_stream_ops - the OPs to support a specific stream type |
| */ |
| struct i915_perf_stream_ops { |
| /** |
| * @enable: Enables the collection of HW samples, either in response to |
| * `I915_PERF_IOCTL_ENABLE` or implicitly called when stream is opened |
| * without `I915_PERF_FLAG_DISABLED`. |
| */ |
| void (*enable)(struct i915_perf_stream *stream); |
| |
| /** |
| * @disable: Disables the collection of HW samples, either in response |
| * to `I915_PERF_IOCTL_DISABLE` or implicitly called before destroying |
| * the stream. |
| */ |
| void (*disable)(struct i915_perf_stream *stream); |
| |
| /** |
| * @poll_wait: Call poll_wait, passing a wait queue that will be woken |
| * once there is something ready to read() for the stream |
| */ |
| void (*poll_wait)(struct i915_perf_stream *stream, |
| struct file *file, |
| poll_table *wait); |
| |
| /** |
| * @wait_unlocked: For handling a blocking read, wait until there is |
| * something to ready to read() for the stream. E.g. wait on the same |
| * wait queue that would be passed to poll_wait(). |
| */ |
| int (*wait_unlocked)(struct i915_perf_stream *stream); |
| |
| /** |
| * @read: Copy buffered metrics as records to userspace |
| * **buf**: the userspace, destination buffer |
| * **count**: the number of bytes to copy, requested by userspace |
| * **offset**: zero at the start of the read, updated as the read |
| * proceeds, it represents how many bytes have been copied so far and |
| * the buffer offset for copying the next record. |
| * |
| * Copy as many buffered i915 perf samples and records for this stream |
| * to userspace as will fit in the given buffer. |
| * |
| * Only write complete records; returning -%ENOSPC if there isn't room |
| * for a complete record. |
| * |
| * Return any error condition that results in a short read such as |
| * -%ENOSPC or -%EFAULT, even though these may be squashed before |
| * returning to userspace. |
| */ |
| int (*read)(struct i915_perf_stream *stream, |
| char __user *buf, |
| size_t count, |
| size_t *offset); |
| |
| /** |
| * @destroy: Cleanup any stream specific resources. |
| * |
| * The stream will always be disabled before this is called. |
| */ |
| void (*destroy)(struct i915_perf_stream *stream); |
| }; |
| |
| /** |
| * struct i915_perf_stream - state for a single open stream FD |
| */ |
| struct i915_perf_stream { |
| /** |
| * @dev_priv: i915 drm device |
| */ |
| struct drm_i915_private *dev_priv; |
| |
| /** |
| * @link: Links the stream into ``&drm_i915_private->streams`` |
| */ |
| struct list_head link; |
| |
| /** |
| * @sample_flags: Flags representing the `DRM_I915_PERF_PROP_SAMPLE_*` |
| * properties given when opening a stream, representing the contents |
| * of a single sample as read() by userspace. |
| */ |
| u32 sample_flags; |
| |
| /** |
| * @sample_size: Considering the configured contents of a sample |
| * combined with the required header size, this is the total size |
| * of a single sample record. |
| */ |
| int sample_size; |
| |
| /** |
| * @ctx: %NULL if measuring system-wide across all contexts or a |
| * specific context that is being monitored. |
| */ |
| struct i915_gem_context *ctx; |
| |
| /** |
| * @enabled: Whether the stream is currently enabled, considering |
| * whether the stream was opened in a disabled state and based |
| * on `I915_PERF_IOCTL_ENABLE` and `I915_PERF_IOCTL_DISABLE` calls. |
| */ |
| bool enabled; |
| |
| /** |
| * @ops: The callbacks providing the implementation of this specific |
| * type of configured stream. |
| */ |
| const struct i915_perf_stream_ops *ops; |
| |
| /** |
| * @oa_config: The OA configuration used by the stream. |
| */ |
| struct i915_oa_config *oa_config; |
| }; |
| |
| /** |
| * struct i915_oa_ops - Gen specific implementation of an OA unit stream |
| */ |
| struct i915_oa_ops { |
| /** |
| * @is_valid_b_counter_reg: Validates register's address for |
| * programming boolean counters for a particular platform. |
| */ |
| bool (*is_valid_b_counter_reg)(struct drm_i915_private *dev_priv, |
| u32 addr); |
| |
| /** |
| * @is_valid_mux_reg: Validates register's address for programming mux |
| * for a particular platform. |
| */ |
| bool (*is_valid_mux_reg)(struct drm_i915_private *dev_priv, u32 addr); |
| |
| /** |
| * @is_valid_flex_reg: Validates register's address for programming |
| * flex EU filtering for a particular platform. |
| */ |
| bool (*is_valid_flex_reg)(struct drm_i915_private *dev_priv, u32 addr); |
| |
| /** |
| * @init_oa_buffer: Resets the head and tail pointers of the |
| * circular buffer for periodic OA reports. |
| * |
| * Called when first opening a stream for OA metrics, but also may be |
| * called in response to an OA buffer overflow or other error |
| * condition. |
| * |
| * Note it may be necessary to clear the full OA buffer here as part of |
| * maintaining the invariable that new reports must be written to |
| * zeroed memory for us to be able to reliable detect if an expected |
| * report has not yet landed in memory. (At least on Haswell the OA |
| * buffer tail pointer is not synchronized with reports being visible |
| * to the CPU) |
| */ |
| void (*init_oa_buffer)(struct drm_i915_private *dev_priv); |
| |
| /** |
| * @enable_metric_set: Selects and applies any MUX configuration to set |
| * up the Boolean and Custom (B/C) counters that are part of the |
| * counter reports being sampled. May apply system constraints such as |
| * disabling EU clock gating as required. |
| */ |
| int (*enable_metric_set)(struct drm_i915_private *dev_priv, |
| const struct i915_oa_config *oa_config); |
| |
| /** |
| * @disable_metric_set: Remove system constraints associated with using |
| * the OA unit. |
| */ |
| void (*disable_metric_set)(struct drm_i915_private *dev_priv); |
| |
| /** |
| * @oa_enable: Enable periodic sampling |
| */ |
| void (*oa_enable)(struct drm_i915_private *dev_priv); |
| |
| /** |
| * @oa_disable: Disable periodic sampling |
| */ |
| void (*oa_disable)(struct drm_i915_private *dev_priv); |
| |
| /** |
| * @read: Copy data from the circular OA buffer into a given userspace |
| * buffer. |
| */ |
| int (*read)(struct i915_perf_stream *stream, |
| char __user *buf, |
| size_t count, |
| size_t *offset); |
| |
| /** |
| * @oa_hw_tail_read: read the OA tail pointer register |
| * |
| * In particular this enables us to share all the fiddly code for |
| * handling the OA unit tail pointer race that affects multiple |
| * generations. |
| */ |
| u32 (*oa_hw_tail_read)(struct drm_i915_private *dev_priv); |
| }; |
| |
| struct intel_cdclk_state { |
| unsigned int cdclk, vco, ref; |
| }; |
| |
| struct drm_i915_private { |
| struct drm_device drm; |
| |
| struct kmem_cache *objects; |
| struct kmem_cache *vmas; |
| struct kmem_cache *luts; |
| struct kmem_cache *requests; |
| struct kmem_cache *dependencies; |
| struct kmem_cache *priorities; |
| |
| const struct intel_device_info info; |
| |
| void __iomem *regs; |
| |
| struct intel_uncore uncore; |
| |
| struct i915_virtual_gpu vgpu; |
| |
| struct intel_gvt *gvt; |
| |
| struct intel_huc huc; |
| struct intel_guc guc; |
| |
| struct intel_csr csr; |
| |
| struct intel_gmbus gmbus[GMBUS_NUM_PINS]; |
| |
| /** gmbus_mutex protects against concurrent usage of the single hw gmbus |
| * controller on different i2c buses. */ |
| struct mutex gmbus_mutex; |
| |
| /** |
| * Base address of the gmbus and gpio block. |
| */ |
| uint32_t gpio_mmio_base; |
| |
| /* MMIO base address for MIPI regs */ |
| uint32_t mipi_mmio_base; |
| |
| uint32_t psr_mmio_base; |
| |
| uint32_t pps_mmio_base; |
| |
| wait_queue_head_t gmbus_wait_queue; |
| |
| struct pci_dev *bridge_dev; |
| struct i915_gem_context *kernel_context; |
| struct intel_engine_cs *engine[I915_NUM_ENGINES]; |
| struct i915_vma *semaphore; |
| |
| struct drm_dma_handle *status_page_dmah; |
| struct resource mch_res; |
| |
| /* protects the irq masks */ |
| spinlock_t irq_lock; |
| |
| bool display_irqs_enabled; |
| |
| /* To control wakeup latency, e.g. for irq-driven dp aux transfers. */ |
| struct pm_qos_request pm_qos; |
| |
| /* Sideband mailbox protection */ |
| struct mutex sb_lock; |
| |
| /** Cached value of IMR to avoid reads in updating the bitfield */ |
| union { |
| u32 irq_mask; |
| u32 de_irq_mask[I915_MAX_PIPES]; |
| }; |
| u32 gt_irq_mask; |
| u32 pm_imr; |
| u32 pm_ier; |
| u32 pm_rps_events; |
| u32 pm_guc_events; |
| u32 pipestat_irq_mask[I915_MAX_PIPES]; |
| |
| struct i915_hotplug hotplug; |
| struct intel_fbc fbc; |
| struct i915_drrs drrs; |
| struct intel_opregion opregion; |
| struct intel_vbt_data vbt; |
| |
| bool preserve_bios_swizzle; |
| |
| /* overlay */ |
| struct intel_overlay *overlay; |
| |
| /* backlight registers and fields in struct intel_panel */ |
| struct mutex backlight_lock; |
| |
| /* LVDS info */ |
| bool no_aux_handshake; |
| |
| /* protects panel power sequencer state */ |
| struct mutex pps_mutex; |
| |
| struct drm_i915_fence_reg fence_regs[I915_MAX_NUM_FENCES]; /* assume 965 */ |
| int num_fence_regs; /* 8 on pre-965, 16 otherwise */ |
| |
| unsigned int fsb_freq, mem_freq, is_ddr3; |
| unsigned int skl_preferred_vco_freq; |
| unsigned int max_cdclk_freq; |
| |
| unsigned int max_dotclk_freq; |
| unsigned int rawclk_freq; |
| unsigned int hpll_freq; |
| unsigned int czclk_freq; |
| |
| struct { |
| /* |
| * The current logical cdclk state. |
| * See intel_atomic_state.cdclk.logical |
| * |
| * For reading holding any crtc lock is sufficient, |
| * for writing must hold all of them. |
| */ |
| struct intel_cdclk_state logical; |
| /* |
| * The current actual cdclk state. |
| * See intel_atomic_state.cdclk.actual |
| */ |
| struct intel_cdclk_state actual; |
| /* The current hardware cdclk state */ |
| struct intel_cdclk_state hw; |
| } cdclk; |
| |
| /** |
| * wq - Driver workqueue for GEM. |
| * |
| * NOTE: Work items scheduled here are not allowed to grab any modeset |
| * locks, for otherwise the flushing done in the pageflip code will |
| * result in deadlocks. |
| */ |
| struct workqueue_struct *wq; |
| |
| /* Display functions */ |
| struct drm_i915_display_funcs display; |
| |
| /* PCH chipset type */ |
| enum intel_pch pch_type; |
| unsigned short pch_id; |
| |
| unsigned long quirks; |
| |
| struct drm_atomic_state *modeset_restore_state; |
| struct drm_modeset_acquire_ctx reset_ctx; |
| |
| struct list_head vm_list; /* Global list of all address spaces */ |
| struct i915_ggtt ggtt; /* VM representing the global address space */ |
| |
| struct i915_gem_mm mm; |
| DECLARE_HASHTABLE(mm_structs, 7); |
| struct mutex mm_lock; |
| |
| /* Kernel Modesetting */ |
| |
| struct intel_crtc *plane_to_crtc_mapping[I915_MAX_PIPES]; |
| struct intel_crtc *pipe_to_crtc_mapping[I915_MAX_PIPES]; |
| |
| #ifdef CONFIG_DEBUG_FS |
| struct intel_pipe_crc pipe_crc[I915_MAX_PIPES]; |
| #endif |
| |
| /* dpll and cdclk state is protected by connection_mutex */ |
| int num_shared_dpll; |
| struct intel_shared_dpll shared_dplls[I915_NUM_PLLS]; |
| const struct intel_dpll_mgr *dpll_mgr; |
| |
| /* |
| * dpll_lock serializes intel_{prepare,enable,disable}_shared_dpll. |
| * Must be global rather than per dpll, because on some platforms |
| * plls share registers. |
| */ |
| struct mutex dpll_lock; |
| |
| unsigned int active_crtcs; |
| unsigned int min_pixclk[I915_MAX_PIPES]; |
| |
| int dpio_phy_iosf_port[I915_NUM_PHYS_VLV]; |
| |
| struct i915_workarounds workarounds; |
| |
| struct i915_frontbuffer_tracking fb_tracking; |
| |
| struct intel_atomic_helper { |
| struct llist_head free_list; |
| struct work_struct free_work; |
| } atomic_helper; |
| |
| u16 orig_clock; |
| |
| bool mchbar_need_disable; |
| |
| struct intel_l3_parity l3_parity; |
| |
| /* Cannot be determined by PCIID. You must always read a register. */ |
| u32 edram_cap; |
| |
| /* gen6+ rps state */ |
| struct intel_gen6_power_mgmt rps; |
| |
| /* ilk-only ips/rps state. Everything in here is protected by the global |
| * mchdev_lock in intel_pm.c */ |
| struct intel_ilk_power_mgmt ips; |
| |
| struct i915_power_domains power_domains; |
| |
| struct i915_psr psr; |
| |
| struct i915_gpu_error gpu_error; |
| |
| struct drm_i915_gem_object *vlv_pctx; |
| |
| /* list of fbdev register on this device */ |
| struct intel_fbdev *fbdev; |
| struct work_struct fbdev_suspend_work; |
| |
| struct drm_property *broadcast_rgb_property; |
| struct drm_property *force_audio_property; |
| |
| /* hda/i915 audio component */ |
| struct i915_audio_component *audio_component; |
| bool audio_component_registered; |
| /** |
| * av_mutex - mutex for audio/video sync |
| * |
| */ |
| struct mutex av_mutex; |
| |
| struct { |
| struct list_head list; |
| struct llist_head free_list; |
| struct work_struct free_work; |
| |
| /* The hw wants to have a stable context identifier for the |
| * lifetime of the context (for OA, PASID, faults, etc). |
| * This is limited in execlists to 21 bits. |
| */ |
| struct ida hw_ida; |
| #define MAX_CONTEXT_HW_ID (1<<21) /* exclusive */ |
| } contexts; |
| |
| u32 fdi_rx_config; |
| |
| /* Shadow for DISPLAY_PHY_CONTROL which can't be safely read */ |
| u32 chv_phy_control; |
| /* |
| * Shadows for CHV DPLL_MD regs to keep the state |
| * checker somewhat working in the presence hardware |
| * crappiness (can't read out DPLL_MD for pipes B & C). |
| */ |
| u32 chv_dpll_md[I915_MAX_PIPES]; |
| u32 bxt_phy_grc; |
| |
| u32 suspend_count; |
| bool suspended_to_idle; |
| struct i915_suspend_saved_registers regfile; |
| struct vlv_s0ix_state vlv_s0ix_state; |
| |
| enum { |
| I915_SAGV_UNKNOWN = 0, |
| I915_SAGV_DISABLED, |
| I915_SAGV_ENABLED, |
| I915_SAGV_NOT_CONTROLLED |
| } sagv_status; |
| |
| struct { |
| /* |
| * Raw watermark latency values: |
| * in 0.1us units for WM0, |
| * in 0.5us units for WM1+. |
| */ |
| /* primary */ |
| uint16_t pri_latency[5]; |
| /* sprite */ |
| uint16_t spr_latency[5]; |
| /* cursor */ |
| uint16_t cur_latency[5]; |
| /* |
| * Raw watermark memory latency values |
| * for SKL for all 8 levels |
| * in 1us units. |
| */ |
| uint16_t skl_latency[8]; |
| |
| /* current hardware state */ |
| union { |
| struct ilk_wm_values hw; |
| struct skl_wm_values skl_hw; |
| struct vlv_wm_values vlv; |
| struct g4x_wm_values g4x; |
| }; |
| |
| uint8_t max_level; |
| |
| /* |
| * Should be held around atomic WM register writing; also |
| * protects * intel_crtc->wm.active and |
| * cstate->wm.need_postvbl_update. |
| */ |
| struct mutex wm_mutex; |
| |
| /* |
| * Set during HW readout of watermarks/DDB. Some platforms |
| * need to know when we're still using BIOS-provided values |
| * (which we don't fully trust). |
| */ |
| bool distrust_bios_wm; |
| } wm; |
| |
| struct i915_runtime_pm pm; |
| |
| struct { |
| bool initialized; |
| |
| struct kobject *metrics_kobj; |
| struct ctl_table_header *sysctl_header; |
| |
| /* |
| * Lock associated with adding/modifying/removing OA configs |
| * in dev_priv->perf.metrics_idr. |
| */ |
| struct mutex metrics_lock; |
| |
| /* |
| * List of dynamic configurations, you need to hold |
| * dev_priv->perf.metrics_lock to access it. |
| */ |
| struct idr metrics_idr; |
| |
| /* |
| * Lock associated with anything below within this structure |
| * except exclusive_stream. |
| */ |
| struct mutex lock; |
| struct list_head streams; |
| |
| struct { |
| /* |
| * The stream currently using the OA unit. If accessed |
| * outside a syscall associated to its file |
| * descriptor, you need to hold |
| * dev_priv->drm.struct_mutex. |
| */ |
| struct i915_perf_stream *exclusive_stream; |
| |
| u32 specific_ctx_id; |
| |
| struct hrtimer poll_check_timer; |
| wait_queue_head_t poll_wq; |
| bool pollin; |
| |
| /** |
| * For rate limiting any notifications of spurious |
| * invalid OA reports |
| */ |
| struct ratelimit_state spurious_report_rs; |
| |
| bool periodic; |
| int period_exponent; |
| int timestamp_frequency; |
| |
| struct i915_oa_config test_config; |
| |
| struct { |
| struct i915_vma *vma; |
| u8 *vaddr; |
| u32 last_ctx_id; |
| int format; |
| int format_size; |
| |
| /** |
| * Locks reads and writes to all head/tail state |
| * |
| * Consider: the head and tail pointer state |
| * needs to be read consistently from a hrtimer |
| * callback (atomic context) and read() fop |
| * (user context) with tail pointer updates |
| * happening in atomic context and head updates |
| * in user context and the (unlikely) |
| * possibility of read() errors needing to |
| * reset all head/tail state. |
| * |
| * Note: Contention or performance aren't |
| * currently a significant concern here |
| * considering the relatively low frequency of |
| * hrtimer callbacks (5ms period) and that |
| * reads typically only happen in response to a |
| * hrtimer event and likely complete before the |
| * next callback. |
| * |
| * Note: This lock is not held *while* reading |
| * and copying data to userspace so the value |
| * of head observed in htrimer callbacks won't |
| * represent any partial consumption of data. |
| */ |
| spinlock_t ptr_lock; |
| |
| /** |
| * One 'aging' tail pointer and one 'aged' |
| * tail pointer ready to used for reading. |
| * |
| * Initial values of 0xffffffff are invalid |
| * and imply that an update is required |
| * (and should be ignored by an attempted |
| * read) |
| */ |
| struct { |
| u32 offset; |
| } tails[2]; |
| |
| /** |
| * Index for the aged tail ready to read() |
| * data up to. |
| */ |
| unsigned int aged_tail_idx; |
| |
| /** |
| * A monotonic timestamp for when the current |
| * aging tail pointer was read; used to |
| * determine when it is old enough to trust. |
| */ |
| u64 aging_timestamp; |
| |
| /** |
| * Although we can always read back the head |
| * pointer register, we prefer to avoid |
| * trusting the HW state, just to avoid any |
| * risk that some hardware condition could |
| * somehow bump the head pointer unpredictably |
| * and cause us to forward the wrong OA buffer |
| * data to userspace. |
| */ |
| u32 head; |
| } oa_buffer; |
| |
| u32 gen7_latched_oastatus1; |
| u32 ctx_oactxctrl_offset; |
| u32 ctx_flexeu0_offset; |
| |
| /** |
| * The RPT_ID/reason field for Gen8+ includes a bit |
| * to determine if the CTX ID in the report is valid |
| * but the specific bit differs between Gen 8 and 9 |
| */ |
| u32 gen8_valid_ctx_bit; |
| |
| struct i915_oa_ops ops; |
| const struct i915_oa_format *oa_formats; |
| } oa; |
| } perf; |
| |
| /* Abstract the submission mechanism (legacy ringbuffer or execlists) away */ |
| struct { |
| void (*resume)(struct drm_i915_private *); |
| void (*cleanup_engine)(struct intel_engine_cs *engine); |
| |
| struct list_head timelines; |
| struct i915_gem_timeline global_timeline; |
| u32 active_requests; |
| |
| /** |
| * Is the GPU currently considered idle, or busy executing |
| * userspace requests? Whilst idle, we allow runtime power |
| * management to power down the hardware and display clocks. |
| * In order to reduce the effect on performance, there |
| * is a slight delay before we do so. |
| */ |
| bool awake; |
| |
| /** |
| * We leave the user IRQ off as much as possible, |
| * but this means that requests will finish and never |
| * be retired once the system goes idle. Set a timer to |
| * fire periodically while the ring is running. When it |
| * fires, go retire requests. |
| */ |
| struct delayed_work retire_work; |
| |
| /** |
| * When we detect an idle GPU, we want to turn on |
| * powersaving features. So once we see that there |
| * are no more requests outstanding and no more |
| * arrive within a small period of time, we fire |
| * off the idle_work. |
| */ |
| struct delayed_work idle_work; |
| |
| ktime_t last_init_time; |
| } gt; |
| |
| /* perform PHY state sanity checks? */ |
| bool chv_phy_assert[2]; |
| |
| bool ipc_enabled; |
| |
| /* Used to save the pipe-to-encoder mapping for audio */ |
| struct intel_encoder *av_enc_map[I915_MAX_PIPES]; |
| |
| /* necessary resource sharing with HDMI LPE audio driver. */ |
| struct { |
| struct platform_device *platdev; |
| int irq; |
| } lpe_audio; |
| |
| /* |
| * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch |
| * will be rejected. Instead look for a better place. |
| */ |
| }; |
| |
| static inline struct drm_i915_private *to_i915(const struct drm_device *dev) |
| { |
| return container_of(dev, struct drm_i915_private, drm); |
| } |
| |
| static inline struct drm_i915_private *kdev_to_i915(struct device *kdev) |
| { |
| return to_i915(dev_get_drvdata(kdev)); |
| } |
| |
| static inline struct drm_i915_private *guc_to_i915(struct intel_guc *guc) |
| { |
| return container_of(guc, struct drm_i915_private, guc); |
| } |
| |
| static inline struct drm_i915_private *huc_to_i915(struct intel_huc *huc) |
| { |
| return container_of(huc, struct drm_i915_private, huc); |
| } |
| |
| /* Simple iterator over all initialised engines */ |
| #define for_each_engine(engine__, dev_priv__, id__) \ |
| for ((id__) = 0; \ |
| (id__) < I915_NUM_ENGINES; \ |
| (id__)++) \ |
| for_each_if ((engine__) = (dev_priv__)->engine[(id__)]) |
| |
| /* Iterator over subset of engines selected by mask */ |
| #define for_each_engine_masked(engine__, dev_priv__, mask__, tmp__) \ |
| for (tmp__ = mask__ & INTEL_INFO(dev_priv__)->ring_mask; \ |
| tmp__ ? (engine__ = (dev_priv__)->engine[__mask_next_bit(tmp__)]), 1 : 0; ) |
| |
| enum hdmi_force_audio { |
| HDMI_AUDIO_OFF_DVI = -2, /* no aux data for HDMI-DVI converter */ |
| HDMI_AUDIO_OFF, /* force turn off HDMI audio */ |
| HDMI_AUDIO_AUTO, /* trust EDID */ |
| HDMI_AUDIO_ON, /* force turn on HDMI audio */ |
| }; |
| |
| #define I915_GTT_OFFSET_NONE ((u32)-1) |
| |
| /* |
| * Frontbuffer tracking bits. Set in obj->frontbuffer_bits while a gem bo is |
| * considered to be the frontbuffer for the given plane interface-wise. This |
| * doesn't mean that the hw necessarily already scans it out, but that any |
| * rendering (by the cpu or gpu) will land in the frontbuffer eventually. |
| * |
| * We have one bit per pipe and per scanout plane type. |
| */ |
| #define INTEL_MAX_SPRITE_BITS_PER_PIPE 5 |
| #define INTEL_FRONTBUFFER_BITS_PER_PIPE 8 |
| #define INTEL_FRONTBUFFER_PRIMARY(pipe) \ |
| (1 << (INTEL_FRONTBUFFER_BITS_PER_PIPE * (pipe))) |
| #define INTEL_FRONTBUFFER_CURSOR(pipe) \ |
| (1 << (1 + (INTEL_FRONTBUFFER_BITS_PER_PIPE * (pipe)))) |
| #define INTEL_FRONTBUFFER_SPRITE(pipe, plane) \ |
| (1 << (2 + plane + (INTEL_FRONTBUFFER_BITS_PER_PIPE * (pipe)))) |
| #define INTEL_FRONTBUFFER_OVERLAY(pipe) \ |
| (1 << (2 + INTEL_MAX_SPRITE_BITS_PER_PIPE + (INTEL_FRONTBUFFER_BITS_PER_PIPE * (pipe)))) |
| #define INTEL_FRONTBUFFER_ALL_MASK(pipe) \ |
| (0xff << (INTEL_FRONTBUFFER_BITS_PER_PIPE * (pipe))) |
| |
| /* |
| * Optimised SGL iterator for GEM objects |
| */ |
| static __always_inline struct sgt_iter { |
| struct scatterlist *sgp; |
| union { |
| unsigned long pfn; |
| dma_addr_t dma; |
| }; |
| unsigned int curr; |
| unsigned int max; |
| } __sgt_iter(struct scatterlist *sgl, bool dma) { |
| struct sgt_iter s = { .sgp = sgl }; |
| |
| if (s.sgp) { |
| s.max = s.curr = s.sgp->offset; |
| s.max += s.sgp->length; |
| if (dma) |
| s.dma = sg_dma_address(s.sgp); |
| else |
| s.pfn = page_to_pfn(sg_page(s.sgp)); |
| } |
| |
| return s; |
| } |
| |
| static inline struct scatterlist *____sg_next(struct scatterlist *sg) |
| { |
| ++sg; |
| if (unlikely(sg_is_chain(sg))) |
| sg = sg_chain_ptr(sg); |
| return sg; |
| } |
| |
| /** |
| * __sg_next - return the next scatterlist entry in a list |
| * @sg: The current sg entry |
| * |
| * Description: |
| * If the entry is the last, return NULL; otherwise, step to the next |
| * element in the array (@sg@+1). If that's a chain pointer, follow it; |
| * otherwise just return the pointer to the current element. |
| **/ |
| static inline struct scatterlist *__sg_next(struct scatterlist *sg) |
| { |
| #ifdef CONFIG_DEBUG_SG |
| BUG_ON(sg->sg_magic != SG_MAGIC); |
| #endif |
| return sg_is_last(sg) ? NULL : ____sg_next(sg); |
| } |
| |
| /** |
| * for_each_sgt_dma - iterate over the DMA addresses of the given sg_table |
| * @__dmap: DMA address (output) |
| * @__iter: 'struct sgt_iter' (iterator state, internal) |
| * @__sgt: sg_table to iterate over (input) |
| */ |
| #define for_each_sgt_dma(__dmap, __iter, __sgt) \ |
| for ((__iter) = __sgt_iter((__sgt)->sgl, true); \ |
| ((__dmap) = (__iter).dma + (__iter).curr); \ |
| (((__iter).curr += PAGE_SIZE) < (__iter).max) || \ |
| ((__iter) = __sgt_iter(__sg_next((__iter).sgp), true), 0)) |
| |
| /** |
| * for_each_sgt_page - iterate over the pages of the given sg_table |
| * @__pp: page pointer (output) |
| * @__iter: 'struct sgt_iter' (iterator state, internal) |
| * @__sgt: sg_table to iterate over (input) |
| */ |
| #define for_each_sgt_page(__pp, __iter, __sgt) \ |
| for ((__iter) = __sgt_iter((__sgt)->sgl, false); \ |
| ((__pp) = (__iter).pfn == 0 ? NULL : \ |
| pfn_to_page((__iter).pfn + ((__iter).curr >> PAGE_SHIFT))); \ |
| (((__iter).curr += PAGE_SIZE) < (__iter).max) || \ |
| ((__iter) = __sgt_iter(__sg_next((__iter).sgp), false), 0)) |
| |
| static inline const struct intel_device_info * |
| intel_info(const struct drm_i915_private *dev_priv) |
| { |
| return &dev_priv->info; |
| } |
| |
| #define INTEL_INFO(dev_priv) intel_info((dev_priv)) |
| |
| #define INTEL_GEN(dev_priv) ((dev_priv)->info.gen) |
| #define INTEL_DEVID(dev_priv) ((dev_priv)->info.device_id) |
| |
| #define REVID_FOREVER 0xff |
| #define INTEL_REVID(dev_priv) ((dev_priv)->drm.pdev->revision) |
| |
| #define GEN_FOREVER (0) |
| /* |
| * Returns true if Gen is in inclusive range [Start, End]. |
| * |
| * Use GEN_FOREVER for unbound start and or end. |
| */ |
| #define IS_GEN(dev_priv, s, e) ({ \ |
| unsigned int __s = (s), __e = (e); \ |
| BUILD_BUG_ON(!__builtin_constant_p(s)); \ |
| BUILD_BUG_ON(!__builtin_constant_p(e)); \ |
| if ((__s) != GEN_FOREVER) \ |
| __s = (s) - 1; \ |
| if ((__e) == GEN_FOREVER) \ |
| __e = BITS_PER_LONG - 1; \ |
| else \ |
| __e = (e) - 1; \ |
| !!((dev_priv)->info.gen_mask & GENMASK((__e), (__s))); \ |
| }) |
| |
| /* |
| * Return true if revision is in range [since,until] inclusive. |
| * |
| * Use 0 for open-ended since, and REVID_FOREVER for open-ended until. |
| */ |
| #define IS_REVID(p, since, until) \ |
| (INTEL_REVID(p) >= (since) && INTEL_REVID(p) <= (until)) |
| |
| #define IS_I830(dev_priv) ((dev_priv)->info.platform == INTEL_I830) |
| #define IS_I845G(dev_priv) ((dev_priv)->info.platform == INTEL_I845G) |
| #define IS_I85X(dev_priv) ((dev_priv)->info.platform == INTEL_I85X) |
| #define IS_I865G(dev_priv) ((dev_priv)->info.platform == INTEL_I865G) |
| #define IS_I915G(dev_priv) ((dev_priv)->info.platform == INTEL_I915G) |
| #define IS_I915GM(dev_priv) ((dev_priv)->info.platform == INTEL_I915GM) |
| #define IS_I945G(dev_priv) ((dev_priv)->info.platform == INTEL_I945G) |
| #define IS_I945GM(dev_priv) ((dev_priv)->info.platform == INTEL_I945GM) |
| #define IS_I965G(dev_priv) ((dev_priv)->info.platform == INTEL_I965G) |
| #define IS_I965GM(dev_priv) ((dev_priv)->info.platform == INTEL_I965GM) |
| #define IS_G45(dev_priv) ((dev_priv)->info.platform == INTEL_G45) |
| #define IS_GM45(dev_priv) ((dev_priv)->info.platform == INTEL_GM45) |
| #define IS_G4X(dev_priv) (IS_G45(dev_priv) || IS_GM45(dev_priv)) |
| #define IS_PINEVIEW_G(dev_priv) (INTEL_DEVID(dev_priv) == 0xa001) |
| #define IS_PINEVIEW_M(dev_priv) (INTEL_DEVID(dev_priv) == 0xa011) |
| #define IS_PINEVIEW(dev_priv) ((dev_priv)->info.platform == INTEL_PINEVIEW) |
| #define IS_G33(dev_priv) ((dev_priv)->info.platform == INTEL_G33) |
| #define IS_IRONLAKE_M(dev_priv) (INTEL_DEVID(dev_priv) == 0x0046) |
| #define IS_IVYBRIDGE(dev_priv) ((dev_priv)->info.platform == INTEL_IVYBRIDGE) |
| #define IS_IVB_GT1(dev_priv) (INTEL_DEVID(dev_priv) == 0x0156 || \ |
| INTEL_DEVID(dev_priv) == 0x0152 || \ |
| INTEL_DEVID(dev_priv) == 0x015a) |
| #define IS_VALLEYVIEW(dev_priv) ((dev_priv)->info.platform == INTEL_VALLEYVIEW) |
| #define IS_CHERRYVIEW(dev_priv) ((dev_priv)->info.platform == INTEL_CHERRYVIEW) |
| #define IS_HASWELL(dev_priv) ((dev_priv)->info.platform == INTEL_HASWELL) |
| #define IS_BROADWELL(dev_priv) ((dev_priv)->info.platform == INTEL_BROADWELL) |
| #define IS_SKYLAKE(dev_priv) ((dev_priv)->info.platform == INTEL_SKYLAKE) |
| #define IS_BROXTON(dev_priv) ((dev_priv)->info.platform == INTEL_BROXTON) |
| #define IS_KABYLAKE(dev_priv) ((dev_priv)->info.platform == INTEL_KABYLAKE) |
| #define IS_GEMINILAKE(dev_priv) ((dev_priv)->info.platform == INTEL_GEMINILAKE) |
| #define IS_COFFEELAKE(dev_priv) ((dev_priv)->info.platform == INTEL_COFFEELAKE) |
| #define IS_CANNONLAKE(dev_priv) ((dev_priv)->info.platform == INTEL_CANNONLAKE) |
| #define IS_MOBILE(dev_priv) ((dev_priv)->info.is_mobile) |
| #define IS_HSW_EARLY_SDV(dev_priv) (IS_HASWELL(dev_priv) && \ |
| (INTEL_DEVID(dev_priv) & 0xFF00) == 0x0C00) |
| #define IS_BDW_ULT(dev_priv) (IS_BROADWELL(dev_priv) && \ |
| ((INTEL_DEVID(dev_priv) & 0xf) == 0x6 || \ |
| (INTEL_DEVID(dev_priv) & 0xf) == 0xb || \ |
| (INTEL_DEVID(dev_priv) & 0xf) == 0xe)) |
| /* ULX machines are also considered ULT. */ |
| #define IS_BDW_ULX(dev_priv) (IS_BROADWELL(dev_priv) && \ |
| (INTEL_DEVID(dev_priv) & 0xf) == 0xe) |
| #define IS_BDW_GT3(dev_priv) (IS_BROADWELL(dev_priv) && \ |
| (INTEL_DEVID(dev_priv) & 0x00F0) == 0x0020) |
| #define IS_HSW_ULT(dev_priv) (IS_HASWELL(dev_priv) && \ |
| (INTEL_DEVID(dev_priv) & 0xFF00) == 0x0A00) |
| #define IS_HSW_GT3(dev_priv) (IS_HASWELL(dev_priv) && \ |
| (INTEL_DEVID(dev_priv) & 0x00F0) == 0x0020) |
| /* ULX machines are also considered ULT. */ |
| #define IS_HSW_ULX(dev_priv) (INTEL_DEVID(dev_priv) == 0x0A0E || \ |
| INTEL_DEVID(dev_priv) == 0x0A1E) |
| #define IS_SKL_ULT(dev_priv) (INTEL_DEVID(dev_priv) == 0x1906 || \ |
| INTEL_DEVID(dev_priv) == 0x1913 || \ |
| INTEL_DEVID(dev_priv) == 0x1916 || \ |
| INTEL_DEVID(dev_priv) == 0x1921 || \ |
| INTEL_DEVID(dev_priv) == 0x1926) |
| #define IS_SKL_ULX(dev_priv) (INTEL_DEVID(dev_priv) == 0x190E || \ |
| INTEL_DEVID(dev_priv) == 0x1915 || \ |
| INTEL_DEVID(dev_priv) == 0x191E) |
| #define IS_KBL_ULT(dev_priv) (INTEL_DEVID(dev_priv) == 0x5906 || \ |
| INTEL_DEVID(dev_priv) == 0x5913 || \ |
| INTEL_DEVID(dev_priv) == 0x5916 || \ |
| INTEL_DEVID(dev_priv) == 0x5921 || \ |
| INTEL_DEVID(dev_priv) == 0x5926) |
| #define IS_KBL_ULX(dev_priv) (INTEL_DEVID(dev_priv) == 0x590E || \ |
| INTEL_DEVID(dev_priv) == 0x5915 || \ |
| INTEL_DEVID(dev_priv) == 0x591E) |
| #define IS_SKL_GT2(dev_priv) (IS_SKYLAKE(dev_priv) && \ |
| (INTEL_DEVID(dev_priv) & 0x00F0) == 0x0010) |
| #define IS_SKL_GT3(dev_priv) (IS_SKYLAKE(dev_priv) && \ |
| (INTEL_DEVID(dev_priv) & 0x00F0) == 0x0020) |
| #define IS_SKL_GT4(dev_priv) (IS_SKYLAKE(dev_priv) && \ |
| (INTEL_DEVID(dev_priv) & 0x00F0) == 0x0030) |
| #define IS_KBL_GT2(dev_priv) (IS_KABYLAKE(dev_priv) && \ |
| (INTEL_DEVID(dev_priv) & 0x00F0) == 0x0010) |
| #define IS_KBL_GT3(dev_priv) (IS_KABYLAKE(dev_priv) && \ |
| (INTEL_DEVID(dev_priv) & 0x00F0) == 0x0020) |
| #define IS_CFL_ULT(dev_priv) (IS_COFFEELAKE(dev_priv) && \ |
| (INTEL_DEVID(dev_priv) & 0x00F0) == 0x00A0) |
| |
| #define IS_ALPHA_SUPPORT(intel_info) ((intel_info)->is_alpha_support) |
| |
| #define SKL_REVID_A0 0x0 |
| #define SKL_REVID_B0 0x1 |
| #define SKL_REVID_C0 0x2 |
| #define SKL_REVID_D0 0x3 |
| #define SKL_REVID_E0 0x4 |
| #define SKL_REVID_F0 0x5 |
| #define SKL_REVID_G0 0x6 |
| #define SKL_REVID_H0 0x7 |
| |
| #define IS_SKL_REVID(p, since, until) (IS_SKYLAKE(p) && IS_REVID(p, since, until)) |
| |
| #define BXT_REVID_A0 0x0 |
| #define BXT_REVID_A1 0x1 |
| #define BXT_REVID_B0 0x3 |
| #define BXT_REVID_B_LAST 0x8 |
| #define BXT_REVID_C0 0x9 |
| |
| #define IS_BXT_REVID(dev_priv, since, until) \ |
| (IS_BROXTON(dev_priv) && IS_REVID(dev_priv, since, until)) |
| |
| #define KBL_REVID_A0 0x0 |
| #define KBL_REVID_B0 0x1 |
| #define KBL_REVID_C0 0x2 |
| #define KBL_REVID_D0 0x3 |
| #define KBL_REVID_E0 0x4 |
| |
| #define IS_KBL_REVID(dev_priv, since, until) \ |
| (IS_KABYLAKE(dev_priv) && IS_REVID(dev_priv, since, until)) |
| |
| #define GLK_REVID_A0 0x0 |
| #define GLK_REVID_A1 0x1 |
| |
| #define IS_GLK_REVID(dev_priv, since, until) \ |
| (IS_GEMINILAKE(dev_priv) && IS_REVID(dev_priv, since, until)) |
| |
| #define CNL_REVID_A0 0x0 |
| #define CNL_REVID_B0 0x1 |
| |
| #define IS_CNL_REVID(p, since, until) \ |
| (IS_CANNONLAKE(p) && IS_REVID(p, since, until)) |
| |
| /* |
| * The genX designation typically refers to the render engine, so render |
| * capability related checks should use IS_GEN, while display and other checks |
| * have their own (e.g. HAS_PCH_SPLIT for ILK+ display, IS_foo for particular |
| * chips, etc.). |
| */ |
| #define IS_GEN2(dev_priv) (!!((dev_priv)->info.gen_mask & BIT(1))) |
| #define IS_GEN3(dev_priv) (!!((dev_priv)->info.gen_mask & BIT(2))) |
| #define IS_GEN4(dev_priv) (!!((dev_priv)->info.gen_mask & BIT(3))) |
| #define IS_GEN5(dev_priv) (!!((dev_priv)->info.gen_mask & BIT(4))) |
| #define IS_GEN6(dev_priv) (!!((dev_priv)->info.gen_mask & BIT(5))) |
| #define IS_GEN7(dev_priv) (!!((dev_priv)->info.gen_mask & BIT(6))) |
| #define IS_GEN8(dev_priv) (!!((dev_priv)->info.gen_mask & BIT(7))) |
| #define IS_GEN9(dev_priv) (!!((dev_priv)->info.gen_mask & BIT(8))) |
| #define IS_GEN10(dev_priv) (!!((dev_priv)->info.gen_mask & BIT(9))) |
| |
| #define IS_LP(dev_priv) (INTEL_INFO(dev_priv)->is_lp) |
| #define IS_GEN9_LP(dev_priv) (IS_GEN9(dev_priv) && IS_LP(dev_priv)) |
| #define IS_GEN9_BC(dev_priv) (IS_GEN9(dev_priv) && !IS_LP(dev_priv)) |
| |
| #define ENGINE_MASK(id) BIT(id) |
| #define RENDER_RING ENGINE_MASK(RCS) |
| #define BSD_RING ENGINE_MASK(VCS) |
| #define BLT_RING ENGINE_MASK(BCS) |
| #define VEBOX_RING ENGINE_MASK(VECS) |
| #define BSD2_RING ENGINE_MASK(VCS2) |
| #define ALL_ENGINES (~0) |
| |
| #define HAS_ENGINE(dev_priv, id) \ |
| (!!((dev_priv)->info.ring_mask & ENGINE_MASK(id))) |
| |
| #define HAS_BSD(dev_priv) HAS_ENGINE(dev_priv, VCS) |
| #define HAS_BSD2(dev_priv) HAS_ENGINE(dev_priv, VCS2) |
| #define HAS_BLT(dev_priv) HAS_ENGINE(dev_priv, BCS) |
| #define HAS_VEBOX(dev_priv) HAS_ENGINE(dev_priv, VECS) |
| |
| #define HAS_LLC(dev_priv) ((dev_priv)->info.has_llc) |
| #define HAS_SNOOP(dev_priv) ((dev_priv)->info.has_snoop) |
| #define HAS_EDRAM(dev_priv) (!!((dev_priv)->edram_cap & EDRAM_ENABLED)) |
| #define HAS_WT(dev_priv) ((IS_HASWELL(dev_priv) || \ |
| IS_BROADWELL(dev_priv)) && HAS_EDRAM(dev_priv)) |
| |
| #define HWS_NEEDS_PHYSICAL(dev_priv) ((dev_priv)->info.hws_needs_physical) |
| |
| #define HAS_LOGICAL_RING_CONTEXTS(dev_priv) \ |
| ((dev_priv)->info.has_logical_ring_contexts) |
| #define USES_PPGTT(dev_priv) (i915.enable_ppgtt) |
| #define USES_FULL_PPGTT(dev_priv) (i915.enable_ppgtt >= 2) |
| #define USES_FULL_48BIT_PPGTT(dev_priv) (i915.enable_ppgtt == 3) |
| |
| #define HAS_OVERLAY(dev_priv) ((dev_priv)->info.has_overlay) |
| #define OVERLAY_NEEDS_PHYSICAL(dev_priv) \ |
| ((dev_priv)->info.overlay_needs_physical) |
| |
| /* Early gen2 have a totally busted CS tlb and require pinned batches. */ |
| #define HAS_BROKEN_CS_TLB(dev_priv) (IS_I830(dev_priv) || IS_I845G(dev_priv)) |
| |
| /* WaRsDisableCoarsePowerGating:skl,bxt */ |
| #define NEEDS_WaRsDisableCoarsePowerGating(dev_priv) \ |
| (IS_SKL_GT3(dev_priv) || IS_SKL_GT4(dev_priv)) |
| |
| /* |
| * dp aux and gmbus irq on gen4 seems to be able to generate legacy interrupts |
| * even when in MSI mode. This results in spurious interrupt warnings if the |
| * legacy irq no. is shared with another device. The kernel then disables that |
| * interrupt source and so prevents the other device from working properly. |
| */ |
| #define HAS_AUX_IRQ(dev_priv) ((dev_priv)->info.gen >= 5) |
| #define HAS_GMBUS_IRQ(dev_priv) ((dev_priv)->info.has_gmbus_irq) |
| |
| /* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte |
| * rows, which changed the alignment requirements and fence programming. |
| */ |
| #define HAS_128_BYTE_Y_TILING(dev_priv) (!IS_GEN2(dev_priv) && \ |
| !(IS_I915G(dev_priv) || \ |
| IS_I915GM(dev_priv))) |
| #define SUPPORTS_TV(dev_priv) ((dev_priv)->info.supports_tv) |
| #define I915_HAS_HOTPLUG(dev_priv) ((dev_priv)->info.has_hotplug) |
| |
| #define HAS_FW_BLC(dev_priv) (INTEL_GEN(dev_priv) > 2) |
| #define HAS_PIPE_CXSR(dev_priv) ((dev_priv)->info.has_pipe_cxsr) |
| #define HAS_FBC(dev_priv) ((dev_priv)->info.has_fbc) |
| #define HAS_CUR_FBC(dev_priv) (!HAS_GMCH_DISPLAY(dev_priv) && INTEL_INFO(dev_priv)->gen >= 7) |
| |
| #define HAS_IPS(dev_priv) (IS_HSW_ULT(dev_priv) || IS_BROADWELL(dev_priv)) |
| |
| #define HAS_DP_MST(dev_priv) ((dev_priv)->info.has_dp_mst) |
| |
| #define HAS_DDI(dev_priv) ((dev_priv)->info.has_ddi) |
| #define HAS_FPGA_DBG_UNCLAIMED(dev_priv) ((dev_priv)->info.has_fpga_dbg) |
| #define HAS_PSR(dev_priv) ((dev_priv)->info.has_psr) |
| #define HAS_RC6(dev_priv) ((dev_priv)->info.has_rc6) |
| #define HAS_RC6p(dev_priv) ((dev_priv)->info.has_rc6p) |
| |
| #define HAS_CSR(dev_priv) ((dev_priv)->info.has_csr) |
| |
| #define HAS_RUNTIME_PM(dev_priv) ((dev_priv)->info.has_runtime_pm) |
| #define HAS_64BIT_RELOC(dev_priv) ((dev_priv)->info.has_64bit_reloc) |
| |
| /* |
| * For now, anything with a GuC requires uCode loading, and then supports |
| * command submission once loaded. But these are logically independent |
| * properties, so we have separate macros to test them. |
| */ |
| #define HAS_GUC(dev_priv) ((dev_priv)->info.has_guc) |
| #define HAS_GUC_CT(dev_priv) ((dev_priv)->info.has_guc_ct) |
| #define HAS_GUC_UCODE(dev_priv) (HAS_GUC(dev_priv)) |
| #define HAS_GUC_SCHED(dev_priv) (HAS_GUC(dev_priv)) |
| #define HAS_HUC_UCODE(dev_priv) (HAS_GUC(dev_priv)) |
| |
| #define HAS_RESOURCE_STREAMER(dev_priv) ((dev_priv)->info.has_resource_streamer) |
| |
| #define HAS_POOLED_EU(dev_priv) ((dev_priv)->info.has_pooled_eu) |
| |
| #define INTEL_PCH_DEVICE_ID_MASK 0xff80 |
| #define INTEL_PCH_IBX_DEVICE_ID_TYPE 0x3b00 |
| #define INTEL_PCH_CPT_DEVICE_ID_TYPE 0x1c00 |
| #define INTEL_PCH_PPT_DEVICE_ID_TYPE 0x1e00 |
| #define INTEL_PCH_LPT_DEVICE_ID_TYPE 0x8c00 |
| #define INTEL_PCH_LPT_LP_DEVICE_ID_TYPE 0x9c00 |
| #define INTEL_PCH_WPT_DEVICE_ID_TYPE 0x8c80 |
| #define INTEL_PCH_WPT_LP_DEVICE_ID_TYPE 0x9c80 |
| #define INTEL_PCH_SPT_DEVICE_ID_TYPE 0xA100 |
| #define INTEL_PCH_SPT_LP_DEVICE_ID_TYPE 0x9D00 |
| #define INTEL_PCH_KBP_DEVICE_ID_TYPE 0xA280 |
| #define INTEL_PCH_CNP_DEVICE_ID_TYPE 0xA300 |
| #define INTEL_PCH_CNP_LP_DEVICE_ID_TYPE 0x9D80 |
| #define INTEL_PCH_P2X_DEVICE_ID_TYPE 0x7100 |
| #define INTEL_PCH_P3X_DEVICE_ID_TYPE 0x7000 |
| #define INTEL_PCH_QEMU_DEVICE_ID_TYPE 0x2900 /* qemu q35 has 2918 */ |
| |
| #define INTEL_PCH_TYPE(dev_priv) ((dev_priv)->pch_type) |
| #define HAS_PCH_CNP(dev_priv) (INTEL_PCH_TYPE(dev_priv) == PCH_CNP) |
| #define HAS_PCH_CNP_LP(dev_priv) \ |
| ((dev_priv)->pch_id == INTEL_PCH_CNP_LP_DEVICE_ID_TYPE) |
| #define HAS_PCH_KBP(dev_priv) (INTEL_PCH_TYPE(dev_priv) == PCH_KBP) |
| #define HAS_PCH_SPT(dev_priv) (INTEL_PCH_TYPE(dev_priv) == PCH_SPT) |
| #define HAS_PCH_LPT(dev_priv) (INTEL_PCH_TYPE(dev_priv) == PCH_LPT) |
| #define HAS_PCH_LPT_LP(dev_priv) \ |
| ((dev_priv)->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE || \ |
| (dev_priv)->pch_id == INTEL_PCH_WPT_LP_DEVICE_ID_TYPE) |
| #define HAS_PCH_LPT_H(dev_priv) \ |
| ((dev_priv)->pch_id == INTEL_PCH_LPT_DEVICE_ID_TYPE || \ |
| (dev_priv)->pch_id == INTEL_PCH_WPT_DEVICE_ID_TYPE) |
| #define HAS_PCH_CPT(dev_priv) (INTEL_PCH_TYPE(dev_priv) == PCH_CPT) |
| #define HAS_PCH_IBX(dev_priv) (INTEL_PCH_TYPE(dev_priv) == PCH_IBX) |
| #define HAS_PCH_NOP(dev_priv) (INTEL_PCH_TYPE(dev_priv) == PCH_NOP) |
| #define HAS_PCH_SPLIT(dev_priv) (INTEL_PCH_TYPE(dev_priv) != PCH_NONE) |
| |
| #define HAS_GMCH_DISPLAY(dev_priv) ((dev_priv)->info.has_gmch_display) |
| |
| #define HAS_LSPCON(dev_priv) (INTEL_GEN(dev_priv) >= 9) |
| |
| /* DPF == dynamic parity feature */ |
| #define HAS_L3_DPF(dev_priv) ((dev_priv)->info.has_l3_dpf) |
| #define NUM_L3_SLICES(dev_priv) (IS_HSW_GT3(dev_priv) ? \ |
| 2 : HAS_L3_DPF(dev_priv)) |
| |
| #define GT_FREQUENCY_MULTIPLIER 50 |
| #define GEN9_FREQ_SCALER 3 |
| |
| #include "i915_trace.h" |
| |
| static inline bool intel_vtd_active(void) |
| { |
| #ifdef CONFIG_INTEL_IOMMU |
| if (intel_iommu_gfx_mapped) |
| return true; |
| #endif |
| return false; |
| } |
| |
| static inline bool intel_scanout_needs_vtd_wa(struct drm_i915_private *dev_priv) |
| { |
| return INTEL_GEN(dev_priv) >= 6 && intel_vtd_active(); |
| } |
| |
| static inline bool |
| intel_ggtt_update_needs_vtd_wa(struct drm_i915_private *dev_priv) |
| { |
| return IS_BROXTON(dev_priv) && intel_vtd_active(); |
| } |
| |
| int intel_sanitize_enable_ppgtt(struct drm_i915_private *dev_priv, |
| int enable_ppgtt); |
| |
| bool intel_sanitize_semaphores(struct drm_i915_private *dev_priv, int value); |
| |
| /* i915_drv.c */ |
| void __printf(3, 4) |
| __i915_printk(struct drm_i915_private *dev_priv, const char *level, |
| const char *fmt, ...); |
| |
| #define i915_report_error(dev_priv, fmt, ...) \ |
| __i915_printk(dev_priv, KERN_ERR, fmt, ##__VA_ARGS__) |
| |
| #ifdef CONFIG_COMPAT |
| extern long i915_compat_ioctl(struct file *filp, unsigned int cmd, |
| unsigned long arg); |
| #else |
| #define i915_compat_ioctl NULL |
| #endif |
| extern const struct dev_pm_ops i915_pm_ops; |
| |
| extern int i915_driver_load(struct pci_dev *pdev, |
| const struct pci_device_id *ent); |
| extern void i915_driver_unload(struct drm_device *dev); |
| extern int intel_gpu_reset(struct drm_i915_private *dev_priv, u32 engine_mask); |
| extern bool intel_has_gpu_reset(struct drm_i915_private *dev_priv); |
| |
| #define I915_RESET_QUIET BIT(0) |
| extern void i915_reset(struct drm_i915_private *i915, unsigned int flags); |
| extern int i915_reset_engine(struct intel_engine_cs *engine, |
| unsigned int flags); |
| |
| extern bool intel_has_reset_engine(struct drm_i915_private *dev_priv); |
| extern int intel_guc_reset(struct drm_i915_private *dev_priv); |
| extern void intel_engine_init_hangcheck(struct intel_engine_cs *engine); |
| extern void intel_hangcheck_init(struct drm_i915_private *dev_priv); |
| extern unsigned long i915_chipset_val(struct drm_i915_private *dev_priv); |
| extern unsigned long i915_mch_val(struct drm_i915_private *dev_priv); |
| extern unsigned long i915_gfx_val(struct drm_i915_private *dev_priv); |
| extern void i915_update_gfx_val(struct drm_i915_private *dev_priv); |
| int vlv_force_gfx_clock(struct drm_i915_private *dev_priv, bool on); |
| |
| int intel_engines_init_mmio(struct drm_i915_private *dev_priv); |
| int intel_engines_init(struct drm_i915_private *dev_priv); |
| |
| /* intel_hotplug.c */ |
| void intel_hpd_irq_handler(struct drm_i915_private *dev_priv, |
| u32 pin_mask, u32 long_mask); |
| void intel_hpd_init(struct drm_i915_private *dev_priv); |
| void intel_hpd_init_work(struct drm_i915_private *dev_priv); |
| void intel_hpd_cancel_work(struct drm_i915_private *dev_priv); |
| enum port intel_hpd_pin_to_port(enum hpd_pin pin); |
| enum hpd_pin intel_hpd_pin(enum port port); |
| bool intel_hpd_disable(struct drm_i915_private *dev_priv, enum hpd_pin pin); |
| void intel_hpd_enable(struct drm_i915_private *dev_priv, enum hpd_pin pin); |
| |
| /* i915_irq.c */ |
| static inline void i915_queue_hangcheck(struct drm_i915_private *dev_priv) |
| { |
| unsigned long delay; |
| |
| if (unlikely(!i915.enable_hangcheck)) |
| return; |
| |
| /* Don't continually defer the hangcheck so that it is always run at |
| * least once after work has been scheduled on any ring. Otherwise, |
| * we will ignore a hung ring if a second ring is kept busy. |
| */ |
| |
| delay = round_jiffies_up_relative(DRM_I915_HANGCHECK_JIFFIES); |
| queue_delayed_work(system_long_wq, |
| &dev_priv->gpu_error.hangcheck_work, delay); |
| } |
| |
| __printf(3, 4) |
| void i915_handle_error(struct drm_i915_private *dev_priv, |
| u32 engine_mask, |
| const char *fmt, ...); |
| |
| extern void intel_irq_init(struct drm_i915_private *dev_priv); |
| extern void intel_irq_fini(struct drm_i915_private *dev_priv); |
| int intel_irq_install(struct drm_i915_private *dev_priv); |
| void intel_irq_uninstall(struct drm_i915_private *dev_priv); |
| |
| static inline bool intel_gvt_active(struct drm_i915_private *dev_priv) |
| { |
| return dev_priv->gvt; |
| } |
| |
| static inline bool intel_vgpu_active(struct drm_i915_private *dev_priv) |
| { |
| return dev_priv->vgpu.active; |
| } |
| |
| void |
| i915_enable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe, |
| u32 status_mask); |
| |
| void |
| i915_disable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe, |
| u32 status_mask); |
| |
| void valleyview_enable_display_irqs(struct drm_i915_private *dev_priv); |
| void valleyview_disable_display_irqs(struct drm_i915_private *dev_priv); |
| void i915_hotplug_interrupt_update(struct drm_i915_private *dev_priv, |
| uint32_t mask, |
| uint32_t bits); |
| void ilk_update_display_irq(struct drm_i915_private *dev_priv, |
| uint32_t interrupt_mask, |
| uint32_t enabled_irq_mask); |
| static inline void |
| ilk_enable_display_irq(struct drm_i915_private *dev_priv, uint32_t bits) |
| { |
| ilk_update_display_irq(dev_priv, bits, bits); |
| } |
| static inline void |
| ilk_disable_display_irq(struct drm_i915_private *dev_priv, uint32_t bits) |
| { |
| ilk_update_display_irq(dev_priv, bits, 0); |
| } |
| void bdw_update_pipe_irq(struct drm_i915_private *dev_priv, |
| enum pipe pipe, |
| uint32_t interrupt_mask, |
| uint32_t enabled_irq_mask); |
| static inline void bdw_enable_pipe_irq(struct drm_i915_private *dev_priv, |
| enum pipe pipe, uint32_t bits) |
| { |
| bdw_update_pipe_irq(dev_priv, pipe, bits, bits); |
| } |
| static inline void bdw_disable_pipe_irq(struct drm_i915_private *dev_priv, |
| enum pipe pipe, uint32_t bits) |
| { |
| bdw_update_pipe_irq(dev_priv, pipe, bits, 0); |
| } |
| void ibx_display_interrupt_update(struct drm_i915_private *dev_priv, |
| uint32_t interrupt_mask, |
| uint32_t enabled_irq_mask); |
| static inline void |
| ibx_enable_display_interrupt(struct drm_i915_private *dev_priv, uint32_t bits) |
| { |
| ibx_display_interrupt_update(dev_priv, bits, bits); |
| } |
| static inline void |
| ibx_disable_display_interrupt(struct drm_i915_private *dev_priv, uint32_t bits) |
| { |
| ibx_display_interrupt_update(dev_priv, bits, 0); |
| } |
| |
| /* i915_gem.c */ |
| int i915_gem_create_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_pread_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_mmap_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_execbuffer(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_execbuffer2(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_busy_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_get_caching_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file); |
| int i915_gem_set_caching_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file); |
| int i915_gem_throttle_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_madvise_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_set_tiling_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_get_tiling_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_init_userptr(struct drm_i915_private *dev_priv); |
| void i915_gem_cleanup_userptr(struct drm_i915_private *dev_priv); |
| int i915_gem_userptr_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file); |
| int i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| int i915_gem_wait_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| void i915_gem_sanitize(struct drm_i915_private *i915); |
| int i915_gem_load_init(struct drm_i915_private *dev_priv); |
| void i915_gem_load_cleanup(struct drm_i915_private *dev_priv); |
| void i915_gem_load_init_fences(struct drm_i915_private *dev_priv); |
| int i915_gem_freeze(struct drm_i915_private *dev_priv); |
| int i915_gem_freeze_late(struct drm_i915_private *dev_priv); |
| |
| void *i915_gem_object_alloc(struct drm_i915_private *dev_priv); |
| void i915_gem_object_free(struct drm_i915_gem_object *obj); |
| void i915_gem_object_init(struct drm_i915_gem_object *obj, |
| const struct drm_i915_gem_object_ops *ops); |
| struct drm_i915_gem_object * |
| i915_gem_object_create(struct drm_i915_private *dev_priv, u64 size); |
| struct drm_i915_gem_object * |
| i915_gem_object_create_from_data(struct drm_i915_private *dev_priv, |
| const void *data, size_t size); |
| void i915_gem_close_object(struct drm_gem_object *gem, struct drm_file *file); |
| void i915_gem_free_object(struct drm_gem_object *obj); |
| |
| static inline void i915_gem_drain_freed_objects(struct drm_i915_private *i915) |
| { |
| /* A single pass should suffice to release all the freed objects (along |
| * most call paths) , but be a little more paranoid in that freeing |
| * the objects does take a little amount of time, during which the rcu |
| * callbacks could have added new objects into the freed list, and |
| * armed the work again. |
| */ |
| do { |
| rcu_barrier(); |
| } while (flush_work(&i915->mm.free_work)); |
| } |
| |
| static inline void i915_gem_drain_workqueue(struct drm_i915_private *i915) |
| { |
| /* |
| * Similar to objects above (see i915_gem_drain_freed-objects), in |
| * general we have workers that are armed by RCU and then rearm |
| * themselves in their callbacks. To be paranoid, we need to |
| * drain the workqueue a second time after waiting for the RCU |
| * grace period so that we catch work queued via RCU from the first |
| * pass. As neither drain_workqueue() nor flush_workqueue() report |
| * a result, we make an assumption that we only don't require more |
| * than 2 passes to catch all recursive RCU delayed work. |
| * |
| */ |
| int pass = 2; |
| do { |
| rcu_barrier(); |
| drain_workqueue(i915->wq); |
| } while (--pass); |
| } |
| |
| struct i915_vma * __must_check |
| i915_gem_object_ggtt_pin(struct drm_i915_gem_object *obj, |
| const struct i915_ggtt_view *view, |
| u64 size, |
| u64 alignment, |
| u64 flags); |
| |
| int i915_gem_object_unbind(struct drm_i915_gem_object *obj); |
| void i915_gem_release_mmap(struct drm_i915_gem_object *obj); |
| |
| void i915_gem_runtime_suspend(struct drm_i915_private *dev_priv); |
| |
| static inline int __sg_page_count(const struct scatterlist *sg) |
| { |
| return sg->length >> PAGE_SHIFT; |
| } |
| |
| struct scatterlist * |
| i915_gem_object_get_sg(struct drm_i915_gem_object *obj, |
| unsigned int n, unsigned int *offset); |
| |
| struct page * |
| i915_gem_object_get_page(struct drm_i915_gem_object *obj, |
| unsigned int n); |
| |
| struct page * |
| i915_gem_object_get_dirty_page(struct drm_i915_gem_object *obj, |
| unsigned int n); |
| |
| dma_addr_t |
| i915_gem_object_get_dma_address(struct drm_i915_gem_object *obj, |
| unsigned long n); |
| |
| void __i915_gem_object_set_pages(struct drm_i915_gem_object *obj, |
| struct sg_table *pages); |
| int __i915_gem_object_get_pages(struct drm_i915_gem_object *obj); |
| |
| static inline int __must_check |
| i915_gem_object_pin_pages(struct drm_i915_gem_object *obj) |
| { |
| might_lock(&obj->mm.lock); |
| |
| if (atomic_inc_not_zero(&obj->mm.pages_pin_count)) |
| return 0; |
| |
| return __i915_gem_object_get_pages(obj); |
| } |
| |
| static inline void |
| __i915_gem_object_pin_pages(struct drm_i915_gem_object *obj) |
| { |
| GEM_BUG_ON(!obj->mm.pages); |
| |
| atomic_inc(&obj->mm.pages_pin_count); |
| } |
| |
| static inline bool |
| i915_gem_object_has_pinned_pages(struct drm_i915_gem_object *obj) |
| { |
| return atomic_read(&obj->mm.pages_pin_count); |
| } |
| |
| static inline void |
| __i915_gem_object_unpin_pages(struct drm_i915_gem_object *obj) |
| { |
| GEM_BUG_ON(!i915_gem_object_has_pinned_pages(obj)); |
| GEM_BUG_ON(!obj->mm.pages); |
| |
| atomic_dec(&obj->mm.pages_pin_count); |
| } |
| |
| static inline void |
| i915_gem_object_unpin_pages(struct drm_i915_gem_object *obj) |
| { |
| __i915_gem_object_unpin_pages(obj); |
| } |
| |
| enum i915_mm_subclass { /* lockdep subclass for obj->mm.lock */ |
| I915_MM_NORMAL = 0, |
| I915_MM_SHRINKER |
| }; |
| |
| void __i915_gem_object_put_pages(struct drm_i915_gem_object *obj, |
| enum i915_mm_subclass subclass); |
| void __i915_gem_object_invalidate(struct drm_i915_gem_object *obj); |
| |
| enum i915_map_type { |
| I915_MAP_WB = 0, |
| I915_MAP_WC, |
| #define I915_MAP_OVERRIDE BIT(31) |
| I915_MAP_FORCE_WB = I915_MAP_WB | I915_MAP_OVERRIDE, |
| I915_MAP_FORCE_WC = I915_MAP_WC | I915_MAP_OVERRIDE, |
| }; |
| |
| /** |
| * i915_gem_object_pin_map - return a contiguous mapping of the entire object |
| * @obj: the object to map into kernel address space |
| * @type: the type of mapping, used to select pgprot_t |
| * |
| * Calls i915_gem_object_pin_pages() to prevent reaping of the object's |
| * pages and then returns a contiguous mapping of the backing storage into |
| * the kernel address space. Based on the @type of mapping, the PTE will be |
| * set to either WriteBack or WriteCombine (via pgprot_t). |
| * |
| * The caller is responsible for calling i915_gem_object_unpin_map() when the |
| * mapping is no longer required. |
| * |
| * Returns the pointer through which to access the mapped object, or an |
| * ERR_PTR() on error. |
| */ |
| void *__must_check i915_gem_object_pin_map(struct drm_i915_gem_object *obj, |
| enum i915_map_type type); |
| |
| /** |
| * i915_gem_object_unpin_map - releases an earlier mapping |
| * @obj: the object to unmap |
| * |
| * After pinning the object and mapping its pages, once you are finished |
| * with your access, call i915_gem_object_unpin_map() to release the pin |
| * upon the mapping. Once the pin count reaches zero, that mapping may be |
| * removed. |
| */ |
| static inline void i915_gem_object_unpin_map(struct drm_i915_gem_object *obj) |
| { |
| i915_gem_object_unpin_pages(obj); |
| } |
| |
| int i915_gem_obj_prepare_shmem_read(struct drm_i915_gem_object *obj, |
| unsigned int *needs_clflush); |
| int i915_gem_obj_prepare_shmem_write(struct drm_i915_gem_object *obj, |
| unsigned int *needs_clflush); |
| #define CLFLUSH_BEFORE BIT(0) |
| #define CLFLUSH_AFTER BIT(1) |
| #define CLFLUSH_FLAGS (CLFLUSH_BEFORE | CLFLUSH_AFTER) |
| |
| static inline void |
| i915_gem_obj_finish_shmem_access(struct drm_i915_gem_object *obj) |
| { |
| i915_gem_object_unpin_pages(obj); |
| } |
| |
| int __must_check i915_mutex_lock_interruptible(struct drm_device *dev); |
| void i915_vma_move_to_active(struct i915_vma *vma, |
| struct drm_i915_gem_request *req, |
| unsigned int flags); |
| int i915_gem_dumb_create(struct drm_file *file_priv, |
| struct drm_device *dev, |
| struct drm_mode_create_dumb *args); |
| int i915_gem_mmap_gtt(struct drm_file *file_priv, struct drm_device *dev, |
| uint32_t handle, uint64_t *offset); |
| int i915_gem_mmap_gtt_version(void); |
| |
| void i915_gem_track_fb(struct drm_i915_gem_object *old, |
| struct drm_i915_gem_object *new, |
| unsigned frontbuffer_bits); |
| |
| int __must_check i915_gem_set_global_seqno(struct drm_device *dev, u32 seqno); |
| |
| struct drm_i915_gem_request * |
| i915_gem_find_active_request(struct intel_engine_cs *engine); |
| |
| void i915_gem_retire_requests(struct drm_i915_private *dev_priv); |
| |
| static inline bool i915_reset_backoff(struct i915_gpu_error *error) |
| { |
| return unlikely(test_bit(I915_RESET_BACKOFF, &error->flags)); |
| } |
| |
| static inline bool i915_reset_handoff(struct i915_gpu_error *error) |
| { |
| return unlikely(test_bit(I915_RESET_HANDOFF, &error->flags)); |
| } |
| |
| static inline bool i915_terminally_wedged(struct i915_gpu_error *error) |
| { |
| return unlikely(test_bit(I915_WEDGED, &error->flags)); |
| } |
| |
| static inline bool i915_reset_backoff_or_wedged(struct i915_gpu_error *error) |
| { |
| return i915_reset_backoff(error) | i915_terminally_wedged(error); |
| } |
| |
| static inline u32 i915_reset_count(struct i915_gpu_error *error) |
| { |
| return READ_ONCE(error->reset_count); |
| } |
| |
| static inline u32 i915_reset_engine_count(struct i915_gpu_error *error, |
| struct intel_engine_cs *engine) |
| { |
| return READ_ONCE(error->reset_engine_count[engine->id]); |
| } |
| |
| struct drm_i915_gem_request * |
| i915_gem_reset_prepare_engine(struct intel_engine_cs *engine); |
| int i915_gem_reset_prepare(struct drm_i915_private *dev_priv); |
| void i915_gem_reset(struct drm_i915_private *dev_priv); |
| void i915_gem_reset_finish_engine(struct intel_engine_cs *engine); |
| void i915_gem_reset_finish(struct drm_i915_private *dev_priv); |
| void i915_gem_set_wedged(struct drm_i915_private *dev_priv); |
| bool i915_gem_unset_wedged(struct drm_i915_private *dev_priv); |
| void i915_gem_reset_engine(struct intel_engine_cs *engine, |
| struct drm_i915_gem_request *request); |
| |
| void i915_gem_init_mmio(struct drm_i915_private *i915); |
| int __must_check i915_gem_init(struct drm_i915_private *dev_priv); |
| int __must_check i915_gem_init_hw(struct drm_i915_private *dev_priv); |
| void i915_gem_init_swizzling(struct drm_i915_private *dev_priv); |
| void i915_gem_cleanup_engines(struct drm_i915_private *dev_priv); |
| int i915_gem_wait_for_idle(struct drm_i915_private *dev_priv, |
| unsigned int flags); |
| int __must_check i915_gem_suspend(struct drm_i915_private *dev_priv); |
| void i915_gem_resume(struct drm_i915_private *dev_priv); |
| int i915_gem_fault(struct vm_fault *vmf); |
| int i915_gem_object_wait(struct drm_i915_gem_object *obj, |
| unsigned int flags, |
| long timeout, |
| struct intel_rps_client *rps); |
| int i915_gem_object_wait_priority(struct drm_i915_gem_object *obj, |
| unsigned int flags, |
| int priority); |
| #define I915_PRIORITY_DISPLAY I915_PRIORITY_MAX |
| |
| int __must_check |
| i915_gem_object_set_to_wc_domain(struct drm_i915_gem_object *obj, bool write); |
| int __must_check |
| i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj, bool write); |
| int __must_check |
| i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write); |
| struct i915_vma * __must_check |
| i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, |
| u32 alignment, |
| const struct i915_ggtt_view *view); |
| void i915_gem_object_unpin_from_display_plane(struct i915_vma *vma); |
| int i915_gem_object_attach_phys(struct drm_i915_gem_object *obj, |
| int align); |
| int i915_gem_open(struct drm_i915_private *i915, struct drm_file *file); |
| void i915_gem_release(struct drm_device *dev, struct drm_file *file); |
| |
| int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj, |
| enum i915_cache_level cache_level); |
| |
| struct drm_gem_object *i915_gem_prime_import(struct drm_device *dev, |
| struct dma_buf *dma_buf); |
| |
| struct dma_buf *i915_gem_prime_export(struct drm_device *dev, |
| struct drm_gem_object *gem_obj, int flags); |
| |
| static inline struct i915_hw_ppgtt * |
| i915_vm_to_ppgtt(struct i915_address_space *vm) |
| { |
| return container_of(vm, struct i915_hw_ppgtt, base); |
| } |
| |
| /* i915_gem_fence_reg.c */ |
| int __must_check i915_vma_get_fence(struct i915_vma *vma); |
| int __must_check i915_vma_put_fence(struct i915_vma *vma); |
| |
| void i915_gem_revoke_fences(struct drm_i915_private *dev_priv); |
| void i915_gem_restore_fences(struct drm_i915_private *dev_priv); |
| |
| void i915_gem_detect_bit_6_swizzle(struct drm_i915_private *dev_priv); |
| void i915_gem_object_do_bit_17_swizzle(struct drm_i915_gem_object *obj, |
| struct sg_table *pages); |
| void i915_gem_object_save_bit_17_swizzle(struct drm_i915_gem_object *obj, |
| struct sg_table *pages); |
| |
| static inline struct i915_gem_context * |
| __i915_gem_context_lookup_rcu(struct drm_i915_file_private *file_priv, u32 id) |
| { |
| return idr_find(&file_priv->context_idr, id); |
| } |
| |
| static inline struct i915_gem_context * |
| i915_gem_context_lookup(struct drm_i915_file_private *file_priv, u32 id) |
| { |
| struct i915_gem_context *ctx; |
| |
| rcu_read_lock(); |
| ctx = __i915_gem_context_lookup_rcu(file_priv, id); |
| if (ctx && !kref_get_unless_zero(&ctx->ref)) |
| ctx = NULL; |
| rcu_read_unlock(); |
| |
| return ctx; |
| } |
| |
| static inline struct intel_timeline * |
| i915_gem_context_lookup_timeline(struct i915_gem_context *ctx, |
| struct intel_engine_cs *engine) |
| { |
| struct i915_address_space *vm; |
| |
| vm = ctx->ppgtt ? &ctx->ppgtt->base : &ctx->i915->ggtt.base; |
| return &vm->timeline.engine[engine->id]; |
| } |
| |
| int i915_perf_open_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file); |
| int i915_perf_add_config_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file); |
| int i915_perf_remove_config_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file); |
| void i915_oa_init_reg_state(struct intel_engine_cs *engine, |
| struct i915_gem_context *ctx, |
| uint32_t *reg_state); |
| |
| /* i915_gem_evict.c */ |
| int __must_check i915_gem_evict_something(struct i915_address_space *vm, |
| u64 min_size, u64 alignment, |
| unsigned cache_level, |
| u64 start, u64 end, |
| unsigned flags); |
| int __must_check i915_gem_evict_for_node(struct i915_address_space *vm, |
| struct drm_mm_node *node, |
| unsigned int flags); |
| int i915_gem_evict_vm(struct i915_address_space *vm); |
| |
| /* belongs in i915_gem_gtt.h */ |
| static inline void i915_gem_chipset_flush(struct drm_i915_private *dev_priv) |
| { |
| wmb(); |
| if (INTEL_GEN(dev_priv) < 6) |
| intel_gtt_chipset_flush(); |
| } |
| |
| /* i915_gem_stolen.c */ |
| int i915_gem_stolen_insert_node(struct drm_i915_private *dev_priv, |
| struct drm_mm_node *node, u64 size, |
| unsigned alignment); |
| int i915_gem_stolen_insert_node_in_range(struct drm_i915_private *dev_priv, |
| struct drm_mm_node *node, u64 size, |
| unsigned alignment, u64 start, |
| u64 end); |
| void i915_gem_stolen_remove_node(struct drm_i915_private *dev_priv, |
| struct drm_mm_node *node); |
| int i915_gem_init_stolen(struct drm_i915_private *dev_priv); |
| void i915_gem_cleanup_stolen(struct drm_device *dev); |
| struct drm_i915_gem_object * |
| i915_gem_object_create_stolen(struct drm_i915_private *dev_priv, u32 size); |
| struct drm_i915_gem_object * |
| i915_gem_object_create_stolen_for_preallocated(struct drm_i915_private *dev_priv, |
| u32 stolen_offset, |
| u32 gtt_offset, |
| u32 size); |
| |
| /* i915_gem_internal.c */ |
| struct drm_i915_gem_object * |
| i915_gem_object_create_internal(struct drm_i915_private *dev_priv, |
| phys_addr_t size); |
| |
| /* i915_gem_shrinker.c */ |
| unsigned long i915_gem_shrink(struct drm_i915_private *dev_priv, |
| unsigned long target, |
| unsigned long *nr_scanned, |
| unsigned flags); |
| #define I915_SHRINK_PURGEABLE 0x1 |
| #define I915_SHRINK_UNBOUND 0x2 |
| #define I915_SHRINK_BOUND 0x4 |
| #define I915_SHRINK_ACTIVE 0x8 |
| #define I915_SHRINK_VMAPS 0x10 |
| unsigned long i915_gem_shrink_all(struct drm_i915_private *dev_priv); |
| void i915_gem_shrinker_init(struct drm_i915_private *dev_priv); |
| void i915_gem_shrinker_cleanup(struct drm_i915_private *dev_priv); |
| |
| |
| /* i915_gem_tiling.c */ |
| static inline bool i915_gem_object_needs_bit17_swizzle(struct drm_i915_gem_object *obj) |
| { |
| struct drm_i915_private *dev_priv = to_i915(obj->base.dev); |
| |
| return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 && |
| i915_gem_object_is_tiled(obj); |
| } |
| |
| u32 i915_gem_fence_size(struct drm_i915_private *dev_priv, u32 size, |
| unsigned int tiling, unsigned int stride); |
| u32 i915_gem_fence_alignment(struct drm_i915_private *dev_priv, u32 size, |
| unsigned int tiling, unsigned int stride); |
| |
| /* i915_debugfs.c */ |
| #ifdef CONFIG_DEBUG_FS |
| int i915_debugfs_register(struct drm_i915_private *dev_priv); |
| int i915_debugfs_connector_add(struct drm_connector *connector); |
| void intel_display_crc_init(struct drm_i915_private *dev_priv); |
| #else |
| static inline int i915_debugfs_register(struct drm_i915_private *dev_priv) {return 0;} |
| static inline int i915_debugfs_connector_add(struct drm_connector *connector) |
| { return 0; } |
| static inline void intel_display_crc_init(struct drm_i915_private *dev_priv) {} |
| #endif |
| |
| /* i915_gpu_error.c */ |
| #if IS_ENABLED(CONFIG_DRM_I915_CAPTURE_ERROR) |
| |
| __printf(2, 3) |
| void i915_error_printf(struct drm_i915_error_state_buf *e, const char *f, ...); |
| int i915_error_state_to_str(struct drm_i915_error_state_buf *estr, |
| const struct i915_gpu_state *gpu); |
| int i915_error_state_buf_init(struct drm_i915_error_state_buf *eb, |
| struct drm_i915_private *i915, |
| size_t count, loff_t pos); |
| static inline void i915_error_state_buf_release( |
| struct drm_i915_error_state_buf *eb) |
| { |
| kfree(eb->buf); |
| } |
| |
| struct i915_gpu_state *i915_capture_gpu_state(struct drm_i915_private *i915); |
| void i915_capture_error_state(struct drm_i915_private *dev_priv, |
| u32 engine_mask, |
| const char *error_msg); |
| |
| static inline struct i915_gpu_state * |
| i915_gpu_state_get(struct i915_gpu_state *gpu) |
| { |
| kref_get(&gpu->ref); |
| return gpu; |
| } |
| |
| void __i915_gpu_state_free(struct kref *kref); |
| static inline void i915_gpu_state_put(struct i915_gpu_state *gpu) |
| { |
| if (gpu) |
| kref_put(&gpu->ref, __i915_gpu_state_free); |
| } |
| |
| struct i915_gpu_state *i915_first_error_state(struct drm_i915_private *i915); |
| void i915_reset_error_state(struct drm_i915_private *i915); |
| |
| #else |
| |
| static inline void i915_capture_error_state(struct drm_i915_private *dev_priv, |
| u32 engine_mask, |
| const char *error_msg) |
| { |
| } |
| |
| static inline struct i915_gpu_state * |
| i915_first_error_state(struct drm_i915_private *i915) |
| { |
| return NULL; |
| } |
| |
| static inline void i915_reset_error_state(struct drm_i915_private *i915) |
| { |
| } |
| |
| #endif |
| |
| const char *i915_cache_level_str(struct drm_i915_private *i915, int type); |
| |
| /* i915_cmd_parser.c */ |
| int i915_cmd_parser_get_version(struct drm_i915_private *dev_priv); |
| void intel_engine_init_cmd_parser(struct intel_engine_cs *engine); |
| void intel_engine_cleanup_cmd_parser(struct intel_engine_cs *engine); |
| int intel_engine_cmd_parser(struct intel_engine_cs *engine, |
| struct drm_i915_gem_object *batch_obj, |
| struct drm_i915_gem_object *shadow_batch_obj, |
| u32 batch_start_offset, |
| u32 batch_len, |
| bool is_master); |
| |
| /* i915_perf.c */ |
| extern void i915_perf_init(struct drm_i915_private *dev_priv); |
| extern void i915_perf_fini(struct drm_i915_private *dev_priv); |
| extern void i915_perf_register(struct drm_i915_private *dev_priv); |
| extern void i915_perf_unregister(struct drm_i915_private *dev_priv); |
| |
| /* i915_suspend.c */ |
| extern int i915_save_state(struct drm_i915_private *dev_priv); |
| extern int i915_restore_state(struct drm_i915_private *dev_priv); |
| |
| /* i915_sysfs.c */ |
| void i915_setup_sysfs(struct drm_i915_private *dev_priv); |
| void i915_teardown_sysfs(struct drm_i915_private *dev_priv); |
| |
| /* intel_lpe_audio.c */ |
| int intel_lpe_audio_init(struct drm_i915_private *dev_priv); |
| void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv); |
| void intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv); |
| void intel_lpe_audio_notify(struct drm_i915_private *dev_priv, |
| enum pipe pipe, enum port port, |
| const void *eld, int ls_clock, bool dp_output); |
| |
| /* intel_i2c.c */ |
| extern int intel_setup_gmbus(struct drm_i915_private *dev_priv); |
| extern void intel_teardown_gmbus(struct drm_i915_private *dev_priv); |
| extern bool intel_gmbus_is_valid_pin(struct drm_i915_private *dev_priv, |
| unsigned int pin); |
| |
| extern struct i2c_adapter * |
| intel_gmbus_get_adapter(struct drm_i915_private *dev_priv, unsigned int pin); |
| extern void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed); |
| extern void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit); |
| static inline bool intel_gmbus_is_forced_bit(struct i2c_adapter *adapter) |
| { |
| return container_of(adapter, struct intel_gmbus, adapter)->force_bit; |
| } |
| extern void intel_i2c_reset(struct drm_i915_private *dev_priv); |
| |
| /* intel_bios.c */ |
| void intel_bios_init(struct drm_i915_private *dev_priv); |
| bool intel_bios_is_valid_vbt(const void *buf, size_t size); |
| bool intel_bios_is_tv_present(struct drm_i915_private *dev_priv); |
| bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin); |
| bool intel_bios_is_port_present(struct drm_i915_private *dev_priv, enum port port); |
| bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port); |
| bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port); |
| bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv, enum port *port); |
| bool intel_bios_is_port_hpd_inverted(struct drm_i915_private *dev_priv, |
| enum port port); |
| bool intel_bios_is_lspcon_present(struct drm_i915_private *dev_priv, |
| enum port port); |
| |
| |
| /* intel_opregion.c */ |
| #ifdef CONFIG_ACPI |
| extern int intel_opregion_setup(struct drm_i915_private *dev_priv); |
| extern void intel_opregion_register(struct drm_i915_private *dev_priv); |
| extern void intel_opregion_unregister(struct drm_i915_private *dev_priv); |
| extern void intel_opregion_asle_intr(struct drm_i915_private *dev_priv); |
| extern int intel_opregion_notify_encoder(struct intel_encoder *intel_encoder, |
| bool enable); |
| extern int intel_opregion_notify_adapter(struct drm_i915_private *dev_priv, |
| pci_power_t state); |
| extern int intel_opregion_get_panel_type(struct drm_i915_private *dev_priv); |
| #else |
| static inline int intel_opregion_setup(struct drm_i915_private *dev) { return 0; } |
| static inline void intel_opregion_register(struct drm_i915_private *dev_priv) { } |
| static inline void intel_opregion_unregister(struct drm_i915_private *dev_priv) { } |
| static inline void intel_opregion_asle_intr(struct drm_i915_private *dev_priv) |
| { |
| } |
| static inline int |
| intel_opregion_notify_encoder(struct intel_encoder *intel_encoder, bool enable) |
| { |
| return 0; |
| } |
| static inline int |
| intel_opregion_notify_adapter(struct drm_i915_private *dev, pci_power_t state) |
| { |
| return 0; |
| } |
| static inline int intel_opregion_get_panel_type(struct drm_i915_private *dev) |
| { |
| return -ENODEV; |
| } |
| #endif |
| |
| /* intel_acpi.c */ |
| #ifdef CONFIG_ACPI |
| extern void intel_register_dsm_handler(void); |
| extern void intel_unregister_dsm_handler(void); |
| #else |
| static inline void intel_register_dsm_handler(void) { return; } |
| static inline void intel_unregister_dsm_handler(void) { return; } |
| #endif /* CONFIG_ACPI */ |
| |
| /* intel_device_info.c */ |
| static inline struct intel_device_info * |
| mkwrite_device_info(struct drm_i915_private *dev_priv) |
| { |
| return (struct intel_device_info *)&dev_priv->info; |
| } |
| |
| const char *intel_platform_name(enum intel_platform platform); |
| void intel_device_info_runtime_init(struct drm_i915_private *dev_priv); |
| void intel_device_info_dump(struct drm_i915_private *dev_priv); |
| |
| /* modesetting */ |
| extern void intel_modeset_init_hw(struct drm_device *dev); |
| extern int intel_modeset_init(struct drm_device *dev); |
| extern void intel_modeset_gem_init(struct drm_device *dev); |
| extern void intel_modeset_cleanup(struct drm_device *dev); |
| extern int intel_connector_register(struct drm_connector *); |
| extern void intel_connector_unregister(struct drm_connector *); |
| extern int intel_modeset_vga_set_state(struct drm_i915_private *dev_priv, |
| bool state); |
| extern void intel_display_resume(struct drm_device *dev); |
| extern void i915_redisable_vga(struct drm_i915_private *dev_priv); |
| extern void i915_redisable_vga_power_on(struct drm_i915_private *dev_priv); |
| extern bool ironlake_set_drps(struct drm_i915_private *dev_priv, u8 val); |
| extern void intel_init_pch_refclk(struct drm_i915_private *dev_priv); |
| extern int intel_set_rps(struct drm_i915_private *dev_priv, u8 val); |
| extern bool intel_set_memory_cxsr(struct drm_i915_private *dev_priv, |
| bool enable); |
| |
| int i915_reg_read_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file); |
| |
| /* overlay */ |
| extern struct intel_overlay_error_state * |
| intel_overlay_capture_error_state(struct drm_i915_private *dev_priv); |
| extern void intel_overlay_print_error_state(struct drm_i915_error_state_buf *e, |
| struct intel_overlay_error_state *error); |
| |
| extern struct intel_display_error_state * |
| intel_display_capture_error_state(struct drm_i915_private *dev_priv); |
| extern void intel_display_print_error_state(struct drm_i915_error_state_buf *e, |
| struct intel_display_error_state *error); |
| |
| int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val); |
| int sandybridge_pcode_write_timeout(struct drm_i915_private *dev_priv, u32 mbox, |
| u32 val, int timeout_us); |
| #define sandybridge_pcode_write(dev_priv, mbox, val) \ |
| sandybridge_pcode_write_timeout(dev_priv, mbox, val, 500) |
| |
| int skl_pcode_request(struct drm_i915_private *dev_priv, u32 mbox, u32 request, |
| u32 reply_mask, u32 reply, int timeout_base_ms); |
| |
| /* intel_sideband.c */ |
| u32 vlv_punit_read(struct drm_i915_private *dev_priv, u32 addr); |
| int vlv_punit_write(struct drm_i915_private *dev_priv, u32 addr, u32 val); |
| u32 vlv_nc_read(struct drm_i915_private *dev_priv, u8 addr); |
| u32 vlv_iosf_sb_read(struct drm_i915_private *dev_priv, u8 port, u32 reg); |
| void vlv_iosf_sb_write(struct drm_i915_private *dev_priv, u8 port, u32 reg, u32 val); |
| u32 vlv_cck_read(struct drm_i915_private *dev_priv, u32 reg); |
| void vlv_cck_write(struct drm_i915_private *dev_priv, u32 reg, u32 val); |
| u32 vlv_ccu_read(struct drm_i915_private *dev_priv, u32 reg); |
| void vlv_ccu_write(struct drm_i915_private *dev_priv, u32 reg, u32 val); |
| u32 vlv_bunit_read(struct drm_i915_private *dev_priv, u32 reg); |
| void vlv_bunit_write(struct drm_i915_private *dev_priv, u32 reg, u32 val); |
| u32 vlv_dpio_read(struct drm_i915_private *dev_priv, enum pipe pipe, int reg); |
| void vlv_dpio_write(struct drm_i915_private *dev_priv, enum pipe pipe, int reg, u32 val); |
| u32 intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg, |
| enum intel_sbi_destination destination); |
| void intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value, |
| enum intel_sbi_destination destination); |
| u32 vlv_flisdsi_read(struct drm_i915_private *dev_priv, u32 reg); |
| void vlv_flisdsi_write(struct drm_i915_private *dev_priv, u32 reg, u32 val); |
| |
| /* intel_dpio_phy.c */ |
| void bxt_port_to_phy_channel(struct drm_i915_private *dev_priv, enum port port, |
| enum dpio_phy *phy, enum dpio_channel *ch); |
| void bxt_ddi_phy_set_signal_level(struct drm_i915_private *dev_priv, |
| enum port port, u32 margin, u32 scale, |
| u32 enable, u32 deemphasis); |
| void bxt_ddi_phy_init(struct drm_i915_private *dev_priv, enum dpio_phy phy); |
| void bxt_ddi_phy_uninit(struct drm_i915_private *dev_priv, enum dpio_phy phy); |
| bool bxt_ddi_phy_is_enabled(struct drm_i915_private *dev_priv, |
| enum dpio_phy phy); |
| bool bxt_ddi_phy_verify_state(struct drm_i915_private *dev_priv, |
| enum dpio_phy phy); |
| uint8_t bxt_ddi_phy_calc_lane_lat_optim_mask(struct intel_encoder *encoder, |
| uint8_t lane_count); |
| void bxt_ddi_phy_set_lane_optim_mask(struct intel_encoder *encoder, |
| uint8_t lane_lat_optim_mask); |
| uint8_t bxt_ddi_phy_get_lane_lat_optim_mask(struct intel_encoder *encoder); |
| |
| void chv_set_phy_signal_level(struct intel_encoder *encoder, |
| u32 deemph_reg_value, u32 margin_reg_value, |
| bool uniq_trans_scale); |
| void chv_data_lane_soft_reset(struct intel_encoder *encoder, |
| bool reset); |
| void chv_phy_pre_pll_enable(struct intel_encoder *encoder); |
| void chv_phy_pre_encoder_enable(struct intel_encoder *encoder); |
| void chv_phy_release_cl2_override(struct intel_encoder *encoder); |
| void chv_phy_post_pll_disable(struct intel_encoder *encoder); |
| |
| void vlv_set_phy_signal_level(struct intel_encoder *encoder, |
| u32 demph_reg_value, u32 preemph_reg_value, |
| u32 uniqtranscale_reg_value, u32 tx3_demph); |
| void vlv_phy_pre_pll_enable(struct intel_encoder *encoder); |
| void vlv_phy_pre_encoder_enable(struct intel_encoder *encoder); |
| void vlv_phy_reset_lanes(struct intel_encoder *encoder); |
| |
| int intel_gpu_freq(struct drm_i915_private *dev_priv, int val); |
| int intel_freq_opcode(struct drm_i915_private *dev_priv, int val); |
| u64 intel_rc6_residency_us(struct drm_i915_private *dev_priv, |
| const i915_reg_t reg); |
| |
| #define I915_READ8(reg) dev_priv->uncore.funcs.mmio_readb(dev_priv, (reg), true) |
| #define I915_WRITE8(reg, val) dev_priv->uncore.funcs.mmio_writeb(dev_priv, (reg), (val), true) |
| |
| #define I915_READ16(reg) dev_priv->uncore.funcs.mmio_readw(dev_priv, (reg), true) |
| #define I915_WRITE16(reg, val) dev_priv->uncore.funcs.mmio_writew(dev_priv, (reg), (val), true) |
| #define I915_READ16_NOTRACE(reg) dev_priv->uncore.funcs.mmio_readw(dev_priv, (reg), false) |
| #define I915_WRITE16_NOTRACE(reg, val) dev_priv->uncore.funcs.mmio_writew(dev_priv, (reg), (val), false) |
| |
| #define I915_READ(reg) dev_priv->uncore.funcs.mmio_readl(dev_priv, (reg), true) |
| #define I915_WRITE(reg, val) dev_priv->uncore.funcs.mmio_writel(dev_priv, (reg), (val), true) |
| #define I915_READ_NOTRACE(reg) dev_priv->uncore.funcs.mmio_readl(dev_priv, (reg), false) |
| #define I915_WRITE_NOTRACE(reg, val) dev_priv->uncore.funcs.mmio_writel(dev_priv, (reg), (val), false) |
| |
| /* Be very careful with read/write 64-bit values. On 32-bit machines, they |
| * will be implemented using 2 32-bit writes in an arbitrary order with |
| * an arbitrary delay between them. This can cause the hardware to |
| * act upon the intermediate value, possibly leading to corruption and |
| * machine death. For this reason we do not support I915_WRITE64, or |
| * dev_priv->uncore.funcs.mmio_writeq. |
| * |
| * When reading a 64-bit value as two 32-bit values, the delay may cause |
| * the two reads to mismatch, e.g. a timestamp overflowing. Also note that |
| * occasionally a 64-bit register does not actualy support a full readq |
| * and must be read using two 32-bit reads. |
| * |
| * You have been warned. |
| */ |
| #define I915_READ64(reg) dev_priv->uncore.funcs.mmio_readq(dev_priv, (reg), true) |
| |
| #define I915_READ64_2x32(lower_reg, upper_reg) ({ \ |
| u32 upper, lower, old_upper, loop = 0; \ |
| upper = I915_READ(upper_reg); \ |
| do { \ |
| old_upper = upper; \ |
| lower = I915_READ(lower_reg); \ |
| upper = I915_READ(upper_reg); \ |
| } while (upper != old_upper && loop++ < 2); \ |
| (u64)upper << 32 | lower; }) |
| |
| #define POSTING_READ(reg) (void)I915_READ_NOTRACE(reg) |
| #define POSTING_READ16(reg) (void)I915_READ16_NOTRACE(reg) |
| |
| #define __raw_read(x, s) \ |
| static inline uint##x##_t __raw_i915_read##x(const struct drm_i915_private *dev_priv, \ |
| i915_reg_t reg) \ |
| { \ |
| return read##s(dev_priv->regs + i915_mmio_reg_offset(reg)); \ |
| } |
| |
| #define __raw_write(x, s) \ |
| static inline void __raw_i915_write##x(const struct drm_i915_private *dev_priv, \ |
| i915_reg_t reg, uint##x##_t val) \ |
| { \ |
| write##s(val, dev_priv->regs + i915_mmio_reg_offset(reg)); \ |
| } |
| __raw_read(8, b) |
| __raw_read(16, w) |
| __raw_read(32, l) |
| __raw_read(64, q) |
| |
| __raw_write(8, b) |
| __raw_write(16, w) |
| __raw_write(32, l) |
| __raw_write(64, q) |
| |
| #undef __raw_read |
| #undef __raw_write |
| |
| /* These are untraced mmio-accessors that are only valid to be used inside |
| * critical sections, such as inside IRQ handlers, where forcewake is explicitly |
| * controlled. |
| * |
| * Think twice, and think again, before using these. |
| * |
| * As an example, these accessors can possibly be used between: |
| * |
| * spin_lock_irq(&dev_priv->uncore.lock); |
| * intel_uncore_forcewake_get__locked(); |
| * |
| * and |
| * |
| * intel_uncore_forcewake_put__locked(); |
| * spin_unlock_irq(&dev_priv->uncore.lock); |
| * |
| * |
| * Note: some registers may not need forcewake held, so |
| * intel_uncore_forcewake_{get,put} can be omitted, see |
| * intel_uncore_forcewake_for_reg(). |
| * |
| * Certain architectures will die if the same cacheline is concurrently accessed |
| * by different clients (e.g. on Ivybridge). Access to registers should |
| * therefore generally be serialised, by either the dev_priv->uncore.lock or |
| * a more localised lock guarding all access to that bank of registers. |
| */ |
| #define I915_READ_FW(reg__) __raw_i915_read32(dev_priv, (reg__)) |
| #define I915_WRITE_FW(reg__, val__) __raw_i915_write32(dev_priv, (reg__), (val__)) |
| #define I915_WRITE64_FW(reg__, val__) __raw_i915_write64(dev_priv, (reg__), (val__)) |
| #define POSTING_READ_FW(reg__) (void)I915_READ_FW(reg__) |
| |
| /* "Broadcast RGB" property */ |
| #define INTEL_BROADCAST_RGB_AUTO 0 |
| #define INTEL_BROADCAST_RGB_FULL 1 |
| #define INTEL_BROADCAST_RGB_LIMITED 2 |
| |
| static inline i915_reg_t i915_vgacntrl_reg(struct drm_i915_private *dev_priv) |
| { |
| if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| return VLV_VGACNTRL; |
| else if (INTEL_GEN(dev_priv) >= 5) |
| return CPU_VGACNTRL; |
| else |
| return VGACNTRL; |
| } |
| |
| static inline unsigned long msecs_to_jiffies_timeout(const unsigned int m) |
| { |
| unsigned long j = msecs_to_jiffies(m); |
| |
| return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1); |
| } |
| |
| static inline unsigned long nsecs_to_jiffies_timeout(const u64 n) |
| { |
| /* nsecs_to_jiffies64() does not guard against overflow */ |
| if (NSEC_PER_SEC % HZ && |
| div_u64(n, NSEC_PER_SEC) >= MAX_JIFFY_OFFSET / HZ) |
| return MAX_JIFFY_OFFSET; |
| |
| return min_t(u64, MAX_JIFFY_OFFSET, nsecs_to_jiffies64(n) + 1); |
| } |
| |
| static inline unsigned long |
| timespec_to_jiffies_timeout(const struct timespec *value) |
| { |
| unsigned long j = timespec_to_jiffies(value); |
| |
| return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1); |
| } |
| |
| /* |
| * If you need to wait X milliseconds between events A and B, but event B |
| * doesn't happen exactly after event A, you record the timestamp (jiffies) of |
| * when event A happened, then just before event B you call this function and |
| * pass the timestamp as the first argument, and X as the second argument. |
| */ |
| static inline void |
| wait_remaining_ms_from_jiffies(unsigned long timestamp_jiffies, int to_wait_ms) |
| { |
| unsigned long target_jiffies, tmp_jiffies, remaining_jiffies; |
| |
| /* |
| * Don't re-read the value of "jiffies" every time since it may change |
| * behind our back and break the math. |
| */ |
| tmp_jiffies = jiffies; |
| target_jiffies = timestamp_jiffies + |
| msecs_to_jiffies_timeout(to_wait_ms); |
| |
| if (time_after(target_jiffies, tmp_jiffies)) { |
| remaining_jiffies = target_jiffies - tmp_jiffies; |
| while (remaining_jiffies) |
| remaining_jiffies = |
| schedule_timeout_uninterruptible(remaining_jiffies); |
| } |
| } |
| |
| static inline bool |
| __i915_request_irq_complete(const struct drm_i915_gem_request *req) |
| { |
| struct intel_engine_cs *engine = req->engine; |
| u32 seqno; |
| |
| /* Note that the engine may have wrapped around the seqno, and |
| * so our request->global_seqno will be ahead of the hardware, |
| * even though it completed the request before wrapping. We catch |
| * this by kicking all the waiters before resetting the seqno |
| * in hardware, and also signal the fence. |
| */ |
| if (test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &req->fence.flags)) |
| return true; |
| |
| /* The request was dequeued before we were awoken. We check after |
| * inspecting the hw to confirm that this was the same request |
| * that generated the HWS update. The memory barriers within |
| * the request execution are sufficient to ensure that a check |
| * after reading the value from hw matches this request. |
| */ |
| seqno = i915_gem_request_global_seqno(req); |
| if (!seqno) |
| return false; |
| |
| /* Before we do the heavier coherent read of the seqno, |
| * check the value (hopefully) in the CPU cacheline. |
| */ |
| if (__i915_gem_request_completed(req, seqno)) |
| return true; |
| |
| /* Ensure our read of the seqno is coherent so that we |
| * do not "miss an interrupt" (i.e. if this is the last |
| * request and the seqno write from the GPU is not visible |
| * by the time the interrupt fires, we will see that the |
| * request is incomplete and go back to sleep awaiting |
| * another interrupt that will never come.) |
| * |
| * Strictly, we only need to do this once after an interrupt, |
| * but it is easier and safer to do it every time the waiter |
| * is woken. |
| */ |
| if (engine->irq_seqno_barrier && |
| test_and_clear_bit(ENGINE_IRQ_BREADCRUMB, &engine->irq_posted)) { |
| struct intel_breadcrumbs *b = &engine->breadcrumbs; |
| |
| /* The ordering of irq_posted versus applying the barrier |
| * is crucial. The clearing of the current irq_posted must |
| * be visible before we perform the barrier operation, |
| * such that if a subsequent interrupt arrives, irq_posted |
| * is reasserted and our task rewoken (which causes us to |
| * do another __i915_request_irq_complete() immediately |
| * and reapply the barrier). Conversely, if the clear |
| * occurs after the barrier, then an interrupt that arrived |
| * whilst we waited on the barrier would not trigger a |
| * barrier on the next pass, and the read may not see the |
| * seqno update. |
| */ |
| engine->irq_seqno_barrier(engine); |
| |
| /* If we consume the irq, but we are no longer the bottom-half, |
| * the real bottom-half may not have serialised their own |
| * seqno check with the irq-barrier (i.e. may have inspected |
| * the seqno before we believe it coherent since they see |
| * irq_posted == false but we are still running). |
| */ |
| spin_lock_irq(&b->irq_lock); |
| if (b->irq_wait && b->irq_wait->tsk != current) |
| /* Note that if the bottom-half is changed as we |
| * are sending the wake-up, the new bottom-half will |
| * be woken by whomever made the change. We only have |
| * to worry about when we steal the irq-posted for |
| * ourself. |
| */ |
| wake_up_process(b->irq_wait->tsk); |
| spin_unlock_irq(&b->irq_lock); |
| |
| if (__i915_gem_request_completed(req, seqno)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| void i915_memcpy_init_early(struct drm_i915_private *dev_priv); |
| bool i915_memcpy_from_wc(void *dst, const void *src, unsigned long len); |
| |
| /* The movntdqa instructions used for memcpy-from-wc require 16-byte alignment, |
| * as well as SSE4.1 support. i915_memcpy_from_wc() will report if it cannot |
| * perform the operation. To check beforehand, pass in the parameters to |
| * to i915_can_memcpy_from_wc() - since we only care about the low 4 bits, |
| * you only need to pass in the minor offsets, page-aligned pointers are |
| * always valid. |
| * |
| * For just checking for SSE4.1, in the foreknowledge that the future use |
| * will be correctly aligned, just use i915_has_memcpy_from_wc(). |
| */ |
| #define i915_can_memcpy_from_wc(dst, src, len) \ |
| i915_memcpy_from_wc((void *)((unsigned long)(dst) | (unsigned long)(src) | (len)), NULL, 0) |
| |
| #define i915_has_memcpy_from_wc() \ |
| i915_memcpy_from_wc(NULL, NULL, 0) |
| |
| /* i915_mm.c */ |
| int remap_io_mapping(struct vm_area_struct *vma, |
| unsigned long addr, unsigned long pfn, unsigned long size, |
| struct io_mapping *iomap); |
| |
| static inline bool |
| intel_engine_can_store_dword(struct intel_engine_cs *engine) |
| { |
| return __intel_engine_can_store_dword(INTEL_GEN(engine->i915), |
| engine->class); |
| } |
| |
| #endif |