| // SPDX-License-Identifier: GPL-2.0 |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| |
| #include <asm/mips-boards/bonito64.h> |
| |
| #include <loongson.h> |
| |
| #define PCI_ACCESS_READ 0 |
| #define PCI_ACCESS_WRITE 1 |
| |
| #define HT1LO_PCICFG_BASE 0x1a000000 |
| #define HT1LO_PCICFG_BASE_TP1 0x1b000000 |
| |
| static int loongson3_pci_config_access(unsigned char access_type, |
| struct pci_bus *bus, unsigned int devfn, |
| int where, u32 *data) |
| { |
| unsigned char busnum = bus->number; |
| u_int64_t addr, type; |
| void *addrp; |
| int device = PCI_SLOT(devfn); |
| int function = PCI_FUNC(devfn); |
| int reg = where & ~3; |
| |
| addr = (busnum << 16) | (device << 11) | (function << 8) | reg; |
| if (busnum == 0) { |
| if (device > 31) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| addrp = (void *)(TO_UNCAC(HT1LO_PCICFG_BASE) | (addr & 0xffff)); |
| type = 0; |
| |
| } else { |
| addrp = (void *)(TO_UNCAC(HT1LO_PCICFG_BASE_TP1) | (addr)); |
| type = 0x10000; |
| } |
| |
| if (access_type == PCI_ACCESS_WRITE) |
| writel(*data, addrp); |
| else { |
| *data = readl(addrp); |
| if (*data == 0xffffffff) { |
| *data = -1; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int loongson3_pci_pcibios_read(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 *val) |
| { |
| u32 data = 0; |
| int ret = loongson3_pci_config_access(PCI_ACCESS_READ, |
| bus, devfn, where, &data); |
| |
| if (ret != PCIBIOS_SUCCESSFUL) |
| return ret; |
| |
| if (size == 1) |
| *val = (data >> ((where & 3) << 3)) & 0xff; |
| else if (size == 2) |
| *val = (data >> ((where & 3) << 3)) & 0xffff; |
| else |
| *val = data; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int loongson3_pci_pcibios_write(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 val) |
| { |
| u32 data = 0; |
| int ret; |
| |
| if (size == 4) |
| data = val; |
| else { |
| ret = loongson3_pci_config_access(PCI_ACCESS_READ, |
| bus, devfn, where, &data); |
| if (ret != PCIBIOS_SUCCESSFUL) |
| return ret; |
| |
| if (size == 1) |
| data = (data & ~(0xff << ((where & 3) << 3))) | |
| (val << ((where & 3) << 3)); |
| else if (size == 2) |
| data = (data & ~(0xffff << ((where & 3) << 3))) | |
| (val << ((where & 3) << 3)); |
| } |
| |
| ret = loongson3_pci_config_access(PCI_ACCESS_WRITE, |
| bus, devfn, where, &data); |
| |
| return ret; |
| } |
| |
| struct pci_ops loongson_pci_ops = { |
| .read = loongson3_pci_pcibios_read, |
| .write = loongson3_pci_pcibios_write |
| }; |