| /* | 
 |  *  PNX833x Hardware Watchdog Driver | 
 |  *  Copyright 2008 NXP Semiconductors | 
 |  *  Daniel Laird <daniel.j.laird@nxp.com> | 
 |  *  Andre McCurdy <andre.mccurdy@nxp.com> | 
 |  * | 
 |  *  Heavily based upon - IndyDog	0.3 | 
 |  *  A Hardware Watchdog Device for SGI IP22 | 
 |  * | 
 |  * (c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, All Rights Reserved. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * as published by the Free Software Foundation; either version | 
 |  * 2 of the License, or (at your option) any later version. | 
 |  * | 
 |  * based on softdog.c by Alan Cox <alan@redhat.com> | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/types.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/miscdevice.h> | 
 | #include <linux/watchdog.h> | 
 | #include <linux/notifier.h> | 
 | #include <linux/reboot.h> | 
 | #include <linux/init.h> | 
 | #include <asm/mach-pnx833x/pnx833x.h> | 
 |  | 
 | #define WATCHDOG_TIMEOUT 30		/* 30 sec Maximum timeout */ | 
 | #define WATCHDOG_COUNT_FREQUENCY 68000000U /* Watchdog counts at 68MHZ. */ | 
 | #define	PNX_WATCHDOG_TIMEOUT	(WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY) | 
 | #define PNX_TIMEOUT_VALUE	2040000000U | 
 |  | 
 | /** CONFIG block */ | 
 | #define PNX833X_CONFIG                      (0x07000U) | 
 | #define PNX833X_CONFIG_CPU_WATCHDOG         (0x54) | 
 | #define PNX833X_CONFIG_CPU_WATCHDOG_COMPARE (0x58) | 
 | #define PNX833X_CONFIG_CPU_COUNTERS_CONTROL (0x1c) | 
 |  | 
 | /** RESET block */ | 
 | #define PNX833X_RESET                       (0x08000U) | 
 | #define PNX833X_RESET_CONFIG                (0x08) | 
 |  | 
 | static int pnx833x_wdt_alive; | 
 |  | 
 | /* Set default timeout in MHZ.*/ | 
 | static int pnx833x_wdt_timeout = PNX_WATCHDOG_TIMEOUT; | 
 | module_param(pnx833x_wdt_timeout, int, 0); | 
 | MODULE_PARM_DESC(timeout, "Watchdog timeout in Mhz. (68Mhz clock), default=" | 
 | 			__MODULE_STRING(PNX_TIMEOUT_VALUE) "(30 seconds)."); | 
 |  | 
 | static bool nowayout = WATCHDOG_NOWAYOUT; | 
 | module_param(nowayout, bool, 0); | 
 | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" | 
 | 					__MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); | 
 |  | 
 | #define START_DEFAULT	1 | 
 | static int start_enabled = START_DEFAULT; | 
 | module_param(start_enabled, int, 0); | 
 | MODULE_PARM_DESC(start_enabled, "Watchdog is started on module insertion " | 
 | 				"(default=" __MODULE_STRING(START_DEFAULT) ")"); | 
 |  | 
 | static void pnx833x_wdt_start(void) | 
 | { | 
 | 	/* Enable watchdog causing reset. */ | 
 | 	PNX833X_REG(PNX833X_RESET + PNX833X_RESET_CONFIG) |= 0x1; | 
 | 	/* Set timeout.*/ | 
 | 	PNX833X_REG(PNX833X_CONFIG + | 
 | 		PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout; | 
 | 	/* Enable watchdog. */ | 
 | 	PNX833X_REG(PNX833X_CONFIG + | 
 | 				PNX833X_CONFIG_CPU_COUNTERS_CONTROL) |= 0x1; | 
 |  | 
 | 	pr_info("Started watchdog timer\n"); | 
 | } | 
 |  | 
 | static void pnx833x_wdt_stop(void) | 
 | { | 
 | 	/* Disable watchdog causing reset. */ | 
 | 	PNX833X_REG(PNX833X_RESET + PNX833X_CONFIG) &= 0xFFFFFFFE; | 
 | 	/* Disable watchdog.*/ | 
 | 	PNX833X_REG(PNX833X_CONFIG + | 
 | 			PNX833X_CONFIG_CPU_COUNTERS_CONTROL) &= 0xFFFFFFFE; | 
 |  | 
 | 	pr_info("Stopped watchdog timer\n"); | 
 | } | 
 |  | 
 | static void pnx833x_wdt_ping(void) | 
 | { | 
 | 	PNX833X_REG(PNX833X_CONFIG + | 
 | 		PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout; | 
 | } | 
 |  | 
 | /* | 
 |  *	Allow only one person to hold it open | 
 |  */ | 
 | static int pnx833x_wdt_open(struct inode *inode, struct file *file) | 
 | { | 
 | 	if (test_and_set_bit(0, &pnx833x_wdt_alive)) | 
 | 		return -EBUSY; | 
 |  | 
 | 	if (nowayout) | 
 | 		__module_get(THIS_MODULE); | 
 |  | 
 | 	/* Activate timer */ | 
 | 	if (!start_enabled) | 
 | 		pnx833x_wdt_start(); | 
 |  | 
 | 	pnx833x_wdt_ping(); | 
 |  | 
 | 	pr_info("Started watchdog timer\n"); | 
 |  | 
 | 	return nonseekable_open(inode, file); | 
 | } | 
 |  | 
 | static int pnx833x_wdt_release(struct inode *inode, struct file *file) | 
 | { | 
 | 	/* Shut off the timer. | 
 | 	 * Lock it in if it's a module and we defined ...NOWAYOUT */ | 
 | 	if (!nowayout) | 
 | 		pnx833x_wdt_stop(); /* Turn the WDT off */ | 
 |  | 
 | 	clear_bit(0, &pnx833x_wdt_alive); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t pnx833x_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) | 
 | { | 
 | 	/* Refresh the timer. */ | 
 | 	if (len) | 
 | 		pnx833x_wdt_ping(); | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | static long pnx833x_wdt_ioctl(struct file *file, unsigned int cmd, | 
 | 							unsigned long arg) | 
 | { | 
 | 	int options, new_timeout = 0; | 
 | 	uint32_t timeout, timeout_left = 0; | 
 |  | 
 | 	static const struct watchdog_info ident = { | 
 | 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, | 
 | 		.firmware_version = 0, | 
 | 		.identity = "Hardware Watchdog for PNX833x", | 
 | 	}; | 
 |  | 
 | 	switch (cmd) { | 
 | 	default: | 
 | 		return -ENOTTY; | 
 |  | 
 | 	case WDIOC_GETSUPPORT: | 
 | 		if (copy_to_user((struct watchdog_info *)arg, | 
 | 				 &ident, sizeof(ident))) | 
 | 			return -EFAULT; | 
 | 		return 0; | 
 |  | 
 | 	case WDIOC_GETSTATUS: | 
 | 	case WDIOC_GETBOOTSTATUS: | 
 | 		return put_user(0, (int *)arg); | 
 |  | 
 | 	case WDIOC_SETOPTIONS: | 
 | 		if (get_user(options, (int *)arg)) | 
 | 			return -EFAULT; | 
 |  | 
 | 		if (options & WDIOS_DISABLECARD) | 
 | 			pnx833x_wdt_stop(); | 
 |  | 
 | 		if (options & WDIOS_ENABLECARD) | 
 | 			pnx833x_wdt_start(); | 
 |  | 
 | 		return 0; | 
 |  | 
 | 	case WDIOC_KEEPALIVE: | 
 | 		pnx833x_wdt_ping(); | 
 | 		return 0; | 
 |  | 
 | 	case WDIOC_SETTIMEOUT: | 
 | 	{ | 
 | 		if (get_user(new_timeout, (int *)arg)) | 
 | 			return -EFAULT; | 
 |  | 
 | 		pnx833x_wdt_timeout = new_timeout; | 
 | 		PNX833X_REG(PNX833X_CONFIG + | 
 | 			PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = new_timeout; | 
 | 		return put_user(new_timeout, (int *)arg); | 
 | 	} | 
 |  | 
 | 	case WDIOC_GETTIMEOUT: | 
 | 		timeout = PNX833X_REG(PNX833X_CONFIG + | 
 | 					PNX833X_CONFIG_CPU_WATCHDOG_COMPARE); | 
 | 		return put_user(timeout, (int *)arg); | 
 |  | 
 | 	case WDIOC_GETTIMELEFT: | 
 | 		timeout_left = PNX833X_REG(PNX833X_CONFIG + | 
 | 						PNX833X_CONFIG_CPU_WATCHDOG); | 
 | 		return put_user(timeout_left, (int *)arg); | 
 |  | 
 | 	} | 
 | } | 
 |  | 
 | static int pnx833x_wdt_notify_sys(struct notifier_block *this, | 
 | 					unsigned long code, void *unused) | 
 | { | 
 | 	if (code == SYS_DOWN || code == SYS_HALT) | 
 | 		pnx833x_wdt_stop(); /* Turn the WDT off */ | 
 |  | 
 | 	return NOTIFY_DONE; | 
 | } | 
 |  | 
 | static const struct file_operations pnx833x_wdt_fops = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.llseek		= no_llseek, | 
 | 	.write		= pnx833x_wdt_write, | 
 | 	.unlocked_ioctl	= pnx833x_wdt_ioctl, | 
 | 	.open		= pnx833x_wdt_open, | 
 | 	.release	= pnx833x_wdt_release, | 
 | }; | 
 |  | 
 | static struct miscdevice pnx833x_wdt_miscdev = { | 
 | 	.minor		= WATCHDOG_MINOR, | 
 | 	.name		= "watchdog", | 
 | 	.fops		= &pnx833x_wdt_fops, | 
 | }; | 
 |  | 
 | static struct notifier_block pnx833x_wdt_notifier = { | 
 | 	.notifier_call = pnx833x_wdt_notify_sys, | 
 | }; | 
 |  | 
 | static int __init watchdog_init(void) | 
 | { | 
 | 	int ret, cause; | 
 |  | 
 | 	/* Lets check the reason for the reset.*/ | 
 | 	cause = PNX833X_REG(PNX833X_RESET); | 
 | 	/*If bit 31 is set then watchdog was cause of reset.*/ | 
 | 	if (cause & 0x80000000) { | 
 | 		pr_info("The system was previously reset due to the watchdog firing - please investigate...\n"); | 
 | 	} | 
 |  | 
 | 	ret = register_reboot_notifier(&pnx833x_wdt_notifier); | 
 | 	if (ret) { | 
 | 		pr_err("cannot register reboot notifier (err=%d)\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = misc_register(&pnx833x_wdt_miscdev); | 
 | 	if (ret) { | 
 | 		pr_err("cannot register miscdev on minor=%d (err=%d)\n", | 
 | 		       WATCHDOG_MINOR, ret); | 
 | 		unregister_reboot_notifier(&pnx833x_wdt_notifier); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	pr_info("Hardware Watchdog Timer for PNX833x: Version 0.1\n"); | 
 |  | 
 | 	if (start_enabled) | 
 | 		pnx833x_wdt_start(); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __exit watchdog_exit(void) | 
 | { | 
 | 	misc_deregister(&pnx833x_wdt_miscdev); | 
 | 	unregister_reboot_notifier(&pnx833x_wdt_notifier); | 
 | } | 
 |  | 
 | module_init(watchdog_init); | 
 | module_exit(watchdog_exit); | 
 |  | 
 | MODULE_AUTHOR("Daniel Laird/Andre McCurdy"); | 
 | MODULE_DESCRIPTION("Hardware Watchdog Device for PNX833x"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |