| /* | |
| * Generic HDLC support routines for Linux | |
| * X.25 support | |
| * | |
| * Copyright (C) 1999 - 2006 Krzysztof Halasa <khc@pm.waw.pl> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of version 2 of the GNU General Public License | |
| * as published by the Free Software Foundation. | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/gfp.h> | |
| #include <linux/hdlc.h> | |
| #include <linux/if_arp.h> | |
| #include <linux/inetdevice.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/lapb.h> | |
| #include <linux/module.h> | |
| #include <linux/pkt_sched.h> | |
| #include <linux/poll.h> | |
| #include <linux/rtnetlink.h> | |
| #include <linux/skbuff.h> | |
| #include <net/x25device.h> | |
| static int x25_ioctl(struct net_device *dev, struct ifreq *ifr); | |
| /* These functions are callbacks called by LAPB layer */ | |
| static void x25_connect_disconnect(struct net_device *dev, int reason, int code) | |
| { | |
| struct sk_buff *skb; | |
| unsigned char *ptr; | |
| if ((skb = dev_alloc_skb(1)) == NULL) { | |
| netdev_err(dev, "out of memory\n"); | |
| return; | |
| } | |
| ptr = skb_put(skb, 1); | |
| *ptr = code; | |
| skb->protocol = x25_type_trans(skb, dev); | |
| netif_rx(skb); | |
| } | |
| static void x25_connected(struct net_device *dev, int reason) | |
| { | |
| x25_connect_disconnect(dev, reason, X25_IFACE_CONNECT); | |
| } | |
| static void x25_disconnected(struct net_device *dev, int reason) | |
| { | |
| x25_connect_disconnect(dev, reason, X25_IFACE_DISCONNECT); | |
| } | |
| static int x25_data_indication(struct net_device *dev, struct sk_buff *skb) | |
| { | |
| unsigned char *ptr; | |
| skb_push(skb, 1); | |
| if (skb_cow(skb, 1)) | |
| return NET_RX_DROP; | |
| ptr = skb->data; | |
| *ptr = X25_IFACE_DATA; | |
| skb->protocol = x25_type_trans(skb, dev); | |
| return netif_rx(skb); | |
| } | |
| static void x25_data_transmit(struct net_device *dev, struct sk_buff *skb) | |
| { | |
| hdlc_device *hdlc = dev_to_hdlc(dev); | |
| hdlc->xmit(skb, dev); /* Ignore return value :-( */ | |
| } | |
| static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| int result; | |
| /* X.25 to LAPB */ | |
| switch (skb->data[0]) { | |
| case X25_IFACE_DATA: /* Data to be transmitted */ | |
| skb_pull(skb, 1); | |
| if ((result = lapb_data_request(dev, skb)) != LAPB_OK) | |
| dev_kfree_skb(skb); | |
| return NETDEV_TX_OK; | |
| case X25_IFACE_CONNECT: | |
| if ((result = lapb_connect_request(dev))!= LAPB_OK) { | |
| if (result == LAPB_CONNECTED) | |
| /* Send connect confirm. msg to level 3 */ | |
| x25_connected(dev, 0); | |
| else | |
| netdev_err(dev, "LAPB connect request failed, error code = %i\n", | |
| result); | |
| } | |
| break; | |
| case X25_IFACE_DISCONNECT: | |
| if ((result = lapb_disconnect_request(dev)) != LAPB_OK) { | |
| if (result == LAPB_NOTCONNECTED) | |
| /* Send disconnect confirm. msg to level 3 */ | |
| x25_disconnected(dev, 0); | |
| else | |
| netdev_err(dev, "LAPB disconnect request failed, error code = %i\n", | |
| result); | |
| } | |
| break; | |
| default: /* to be defined */ | |
| break; | |
| } | |
| dev_kfree_skb(skb); | |
| return NETDEV_TX_OK; | |
| } | |
| static int x25_open(struct net_device *dev) | |
| { | |
| int result; | |
| static const struct lapb_register_struct cb = { | |
| .connect_confirmation = x25_connected, | |
| .connect_indication = x25_connected, | |
| .disconnect_confirmation = x25_disconnected, | |
| .disconnect_indication = x25_disconnected, | |
| .data_indication = x25_data_indication, | |
| .data_transmit = x25_data_transmit, | |
| }; | |
| result = lapb_register(dev, &cb); | |
| if (result != LAPB_OK) | |
| return result; | |
| return 0; | |
| } | |
| static void x25_close(struct net_device *dev) | |
| { | |
| lapb_unregister(dev); | |
| } | |
| static int x25_rx(struct sk_buff *skb) | |
| { | |
| struct net_device *dev = skb->dev; | |
| if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) { | |
| dev->stats.rx_dropped++; | |
| return NET_RX_DROP; | |
| } | |
| if (lapb_data_received(dev, skb) == LAPB_OK) | |
| return NET_RX_SUCCESS; | |
| dev->stats.rx_errors++; | |
| dev_kfree_skb_any(skb); | |
| return NET_RX_DROP; | |
| } | |
| static struct hdlc_proto proto = { | |
| .open = x25_open, | |
| .close = x25_close, | |
| .ioctl = x25_ioctl, | |
| .netif_rx = x25_rx, | |
| .xmit = x25_xmit, | |
| .module = THIS_MODULE, | |
| }; | |
| static int x25_ioctl(struct net_device *dev, struct ifreq *ifr) | |
| { | |
| hdlc_device *hdlc = dev_to_hdlc(dev); | |
| int result; | |
| switch (ifr->ifr_settings.type) { | |
| case IF_GET_PROTO: | |
| if (dev_to_hdlc(dev)->proto != &proto) | |
| return -EINVAL; | |
| ifr->ifr_settings.type = IF_PROTO_X25; | |
| return 0; /* return protocol only, no settable parameters */ | |
| case IF_PROTO_X25: | |
| if (!capable(CAP_NET_ADMIN)) | |
| return -EPERM; | |
| if (dev->flags & IFF_UP) | |
| return -EBUSY; | |
| result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT); | |
| if (result) | |
| return result; | |
| if ((result = attach_hdlc_protocol(dev, &proto, 0))) | |
| return result; | |
| dev->type = ARPHRD_X25; | |
| netif_dormant_off(dev); | |
| return 0; | |
| } | |
| return -EINVAL; | |
| } | |
| static int __init mod_init(void) | |
| { | |
| register_hdlc_protocol(&proto); | |
| return 0; | |
| } | |
| static void __exit mod_exit(void) | |
| { | |
| unregister_hdlc_protocol(&proto); | |
| } | |
| module_init(mod_init); | |
| module_exit(mod_exit); | |
| MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); | |
| MODULE_DESCRIPTION("X.25 protocol support for generic HDLC"); | |
| MODULE_LICENSE("GPL v2"); |