| /* | |
| * Copyright © 2006-2011 Intel Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms and conditions of the GNU General Public License, | |
| * version 2, as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along with | |
| * this program; if not, write to the Free Software Foundation, Inc., | |
| * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
| * | |
| * Authors: | |
| * Eric Anholt <eric@anholt.net> | |
| */ | |
| #include <linux/i2c.h> | |
| #include <linux/pm_runtime.h> | |
| #include <drm/drmP.h> | |
| #include "framebuffer.h" | |
| #include "psb_drv.h" | |
| #include "psb_intel_drv.h" | |
| #include "psb_intel_reg.h" | |
| #include "psb_intel_display.h" | |
| #include "power.h" | |
| struct psb_intel_clock_t { | |
| /* given values */ | |
| int n; | |
| int m1, m2; | |
| int p1, p2; | |
| /* derived values */ | |
| int dot; | |
| int vco; | |
| int m; | |
| int p; | |
| }; | |
| struct psb_intel_range_t { | |
| int min, max; | |
| }; | |
| struct psb_intel_p2_t { | |
| int dot_limit; | |
| int p2_slow, p2_fast; | |
| }; | |
| struct psb_intel_limit_t { | |
| struct psb_intel_range_t dot, vco, n, m, m1, m2, p, p1; | |
| struct psb_intel_p2_t p2; | |
| }; | |
| #define INTEL_LIMIT_I9XX_SDVO_DAC 0 | |
| #define INTEL_LIMIT_I9XX_LVDS 1 | |
| static const struct psb_intel_limit_t psb_intel_limits[] = { | |
| { /* INTEL_LIMIT_I9XX_SDVO_DAC */ | |
| .dot = {.min = 20000, .max = 400000}, | |
| .vco = {.min = 1400000, .max = 2800000}, | |
| .n = {.min = 1, .max = 6}, | |
| .m = {.min = 70, .max = 120}, | |
| .m1 = {.min = 8, .max = 18}, | |
| .m2 = {.min = 3, .max = 7}, | |
| .p = {.min = 5, .max = 80}, | |
| .p1 = {.min = 1, .max = 8}, | |
| .p2 = {.dot_limit = 200000, | |
| .p2_slow = 10, .p2_fast = 5}, | |
| }, | |
| { /* INTEL_LIMIT_I9XX_LVDS */ | |
| .dot = {.min = 20000, .max = 400000}, | |
| .vco = {.min = 1400000, .max = 2800000}, | |
| .n = {.min = 1, .max = 6}, | |
| .m = {.min = 70, .max = 120}, | |
| .m1 = {.min = 8, .max = 18}, | |
| .m2 = {.min = 3, .max = 7}, | |
| .p = {.min = 7, .max = 98}, | |
| .p1 = {.min = 1, .max = 8}, | |
| /* The single-channel range is 25-112Mhz, and dual-channel | |
| * is 80-224Mhz. Prefer single channel as much as possible. | |
| */ | |
| .p2 = {.dot_limit = 112000, | |
| .p2_slow = 14, .p2_fast = 7}, | |
| }, | |
| }; | |
| static const struct psb_intel_limit_t *psb_intel_limit(struct drm_crtc *crtc) | |
| { | |
| const struct psb_intel_limit_t *limit; | |
| if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) | |
| limit = &psb_intel_limits[INTEL_LIMIT_I9XX_LVDS]; | |
| else | |
| limit = &psb_intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; | |
| return limit; | |
| } | |
| static void psb_intel_clock(int refclk, struct psb_intel_clock_t *clock) | |
| { | |
| clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); | |
| clock->p = clock->p1 * clock->p2; | |
| clock->vco = refclk * clock->m / (clock->n + 2); | |
| clock->dot = clock->vco / clock->p; | |
| } | |
| /** | |
| * Returns whether any output on the specified pipe is of the specified type | |
| */ | |
| bool psb_intel_pipe_has_type(struct drm_crtc *crtc, int type) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct drm_mode_config *mode_config = &dev->mode_config; | |
| struct drm_connector *l_entry; | |
| list_for_each_entry(l_entry, &mode_config->connector_list, head) { | |
| if (l_entry->encoder && l_entry->encoder->crtc == crtc) { | |
| struct psb_intel_encoder *psb_intel_encoder = | |
| psb_intel_attached_encoder(l_entry); | |
| if (psb_intel_encoder->type == type) | |
| return true; | |
| } | |
| } | |
| return false; | |
| } | |
| #define INTELPllInvalid(s) { /* ErrorF (s) */; return false; } | |
| /** | |
| * Returns whether the given set of divisors are valid for a given refclk with | |
| * the given connectors. | |
| */ | |
| static bool psb_intel_PLL_is_valid(struct drm_crtc *crtc, | |
| struct psb_intel_clock_t *clock) | |
| { | |
| const struct psb_intel_limit_t *limit = psb_intel_limit(crtc); | |
| if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) | |
| INTELPllInvalid("p1 out of range\n"); | |
| if (clock->p < limit->p.min || limit->p.max < clock->p) | |
| INTELPllInvalid("p out of range\n"); | |
| if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) | |
| INTELPllInvalid("m2 out of range\n"); | |
| if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) | |
| INTELPllInvalid("m1 out of range\n"); | |
| if (clock->m1 <= clock->m2) | |
| INTELPllInvalid("m1 <= m2\n"); | |
| if (clock->m < limit->m.min || limit->m.max < clock->m) | |
| INTELPllInvalid("m out of range\n"); | |
| if (clock->n < limit->n.min || limit->n.max < clock->n) | |
| INTELPllInvalid("n out of range\n"); | |
| if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) | |
| INTELPllInvalid("vco out of range\n"); | |
| /* XXX: We may need to be checking "Dot clock" | |
| * depending on the multiplier, connector, etc., | |
| * rather than just a single range. | |
| */ | |
| if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) | |
| INTELPllInvalid("dot out of range\n"); | |
| return true; | |
| } | |
| /** | |
| * Returns a set of divisors for the desired target clock with the given | |
| * refclk, or FALSE. The returned values represent the clock equation: | |
| * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. | |
| */ | |
| static bool psb_intel_find_best_PLL(struct drm_crtc *crtc, int target, | |
| int refclk, | |
| struct psb_intel_clock_t *best_clock) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct psb_intel_clock_t clock; | |
| const struct psb_intel_limit_t *limit = psb_intel_limit(crtc); | |
| int err = target; | |
| if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && | |
| (REG_READ(LVDS) & LVDS_PORT_EN) != 0) { | |
| /* | |
| * For LVDS, if the panel is on, just rely on its current | |
| * settings for dual-channel. We haven't figured out how to | |
| * reliably set up different single/dual channel state, if we | |
| * even can. | |
| */ | |
| if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) == | |
| LVDS_CLKB_POWER_UP) | |
| clock.p2 = limit->p2.p2_fast; | |
| else | |
| clock.p2 = limit->p2.p2_slow; | |
| } else { | |
| if (target < limit->p2.dot_limit) | |
| clock.p2 = limit->p2.p2_slow; | |
| else | |
| clock.p2 = limit->p2.p2_fast; | |
| } | |
| memset(best_clock, 0, sizeof(*best_clock)); | |
| for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; | |
| clock.m1++) { | |
| for (clock.m2 = limit->m2.min; | |
| clock.m2 < clock.m1 && clock.m2 <= limit->m2.max; | |
| clock.m2++) { | |
| for (clock.n = limit->n.min; | |
| clock.n <= limit->n.max; clock.n++) { | |
| for (clock.p1 = limit->p1.min; | |
| clock.p1 <= limit->p1.max; | |
| clock.p1++) { | |
| int this_err; | |
| psb_intel_clock(refclk, &clock); | |
| if (!psb_intel_PLL_is_valid | |
| (crtc, &clock)) | |
| continue; | |
| this_err = abs(clock.dot - target); | |
| if (this_err < err) { | |
| *best_clock = clock; | |
| err = this_err; | |
| } | |
| } | |
| } | |
| } | |
| } | |
| return err != target; | |
| } | |
| void psb_intel_wait_for_vblank(struct drm_device *dev) | |
| { | |
| /* Wait for 20ms, i.e. one cycle at 50hz. */ | |
| mdelay(20); | |
| } | |
| static int psb_intel_pipe_set_base(struct drm_crtc *crtc, | |
| int x, int y, struct drm_framebuffer *old_fb) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); | |
| struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb); | |
| int pipe = psb_intel_crtc->pipe; | |
| const struct psb_offset *map = &dev_priv->regmap[pipe]; | |
| unsigned long start, offset; | |
| u32 dspcntr; | |
| int ret = 0; | |
| if (!gma_power_begin(dev, true)) | |
| return 0; | |
| /* no fb bound */ | |
| if (!crtc->fb) { | |
| dev_dbg(dev->dev, "No FB bound\n"); | |
| goto psb_intel_pipe_cleaner; | |
| } | |
| /* We are displaying this buffer, make sure it is actually loaded | |
| into the GTT */ | |
| ret = psb_gtt_pin(psbfb->gtt); | |
| if (ret < 0) | |
| goto psb_intel_pipe_set_base_exit; | |
| start = psbfb->gtt->offset; | |
| offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8); | |
| REG_WRITE(map->stride, crtc->fb->pitches[0]); | |
| dspcntr = REG_READ(map->cntr); | |
| dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; | |
| switch (crtc->fb->bits_per_pixel) { | |
| case 8: | |
| dspcntr |= DISPPLANE_8BPP; | |
| break; | |
| case 16: | |
| if (crtc->fb->depth == 15) | |
| dspcntr |= DISPPLANE_15_16BPP; | |
| else | |
| dspcntr |= DISPPLANE_16BPP; | |
| break; | |
| case 24: | |
| case 32: | |
| dspcntr |= DISPPLANE_32BPP_NO_ALPHA; | |
| break; | |
| default: | |
| dev_err(dev->dev, "Unknown color depth\n"); | |
| ret = -EINVAL; | |
| psb_gtt_unpin(psbfb->gtt); | |
| goto psb_intel_pipe_set_base_exit; | |
| } | |
| REG_WRITE(map->cntr, dspcntr); | |
| REG_WRITE(map->base, start + offset); | |
| REG_READ(map->base); | |
| psb_intel_pipe_cleaner: | |
| /* If there was a previous display we can now unpin it */ | |
| if (old_fb) | |
| psb_gtt_unpin(to_psb_fb(old_fb)->gtt); | |
| psb_intel_pipe_set_base_exit: | |
| gma_power_end(dev); | |
| return ret; | |
| } | |
| /** | |
| * Sets the power management mode of the pipe and plane. | |
| * | |
| * This code should probably grow support for turning the cursor off and back | |
| * on appropriately at the same time as we're turning the pipe off/on. | |
| */ | |
| static void psb_intel_crtc_dpms(struct drm_crtc *crtc, int mode) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); | |
| int pipe = psb_intel_crtc->pipe; | |
| const struct psb_offset *map = &dev_priv->regmap[pipe]; | |
| u32 temp; | |
| /* XXX: When our outputs are all unaware of DPMS modes other than off | |
| * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. | |
| */ | |
| switch (mode) { | |
| case DRM_MODE_DPMS_ON: | |
| case DRM_MODE_DPMS_STANDBY: | |
| case DRM_MODE_DPMS_SUSPEND: | |
| /* Enable the DPLL */ | |
| temp = REG_READ(map->dpll); | |
| if ((temp & DPLL_VCO_ENABLE) == 0) { | |
| REG_WRITE(map->dpll, temp); | |
| REG_READ(map->dpll); | |
| /* Wait for the clocks to stabilize. */ | |
| udelay(150); | |
| REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); | |
| REG_READ(map->dpll); | |
| /* Wait for the clocks to stabilize. */ | |
| udelay(150); | |
| REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); | |
| REG_READ(map->dpll); | |
| /* Wait for the clocks to stabilize. */ | |
| udelay(150); | |
| } | |
| /* Enable the pipe */ | |
| temp = REG_READ(map->conf); | |
| if ((temp & PIPEACONF_ENABLE) == 0) | |
| REG_WRITE(map->conf, temp | PIPEACONF_ENABLE); | |
| /* Enable the plane */ | |
| temp = REG_READ(map->cntr); | |
| if ((temp & DISPLAY_PLANE_ENABLE) == 0) { | |
| REG_WRITE(map->cntr, | |
| temp | DISPLAY_PLANE_ENABLE); | |
| /* Flush the plane changes */ | |
| REG_WRITE(map->base, REG_READ(map->base)); | |
| } | |
| psb_intel_crtc_load_lut(crtc); | |
| /* Give the overlay scaler a chance to enable | |
| * if it's on this pipe */ | |
| /* psb_intel_crtc_dpms_video(crtc, true); TODO */ | |
| break; | |
| case DRM_MODE_DPMS_OFF: | |
| /* Give the overlay scaler a chance to disable | |
| * if it's on this pipe */ | |
| /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ | |
| /* Disable the VGA plane that we never use */ | |
| REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); | |
| /* Disable display plane */ | |
| temp = REG_READ(map->cntr); | |
| if ((temp & DISPLAY_PLANE_ENABLE) != 0) { | |
| REG_WRITE(map->cntr, | |
| temp & ~DISPLAY_PLANE_ENABLE); | |
| /* Flush the plane changes */ | |
| REG_WRITE(map->base, REG_READ(map->base)); | |
| REG_READ(map->base); | |
| } | |
| /* Next, disable display pipes */ | |
| temp = REG_READ(map->conf); | |
| if ((temp & PIPEACONF_ENABLE) != 0) { | |
| REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE); | |
| REG_READ(map->conf); | |
| } | |
| /* Wait for vblank for the disable to take effect. */ | |
| psb_intel_wait_for_vblank(dev); | |
| temp = REG_READ(map->dpll); | |
| if ((temp & DPLL_VCO_ENABLE) != 0) { | |
| REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE); | |
| REG_READ(map->dpll); | |
| } | |
| /* Wait for the clocks to turn off. */ | |
| udelay(150); | |
| break; | |
| } | |
| /*Set FIFO Watermarks*/ | |
| REG_WRITE(DSPARB, 0x3F3E); | |
| } | |
| static void psb_intel_crtc_prepare(struct drm_crtc *crtc) | |
| { | |
| struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; | |
| crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); | |
| } | |
| static void psb_intel_crtc_commit(struct drm_crtc *crtc) | |
| { | |
| struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; | |
| crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); | |
| } | |
| void psb_intel_encoder_prepare(struct drm_encoder *encoder) | |
| { | |
| struct drm_encoder_helper_funcs *encoder_funcs = | |
| encoder->helper_private; | |
| /* lvds has its own version of prepare see psb_intel_lvds_prepare */ | |
| encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); | |
| } | |
| void psb_intel_encoder_commit(struct drm_encoder *encoder) | |
| { | |
| struct drm_encoder_helper_funcs *encoder_funcs = | |
| encoder->helper_private; | |
| /* lvds has its own version of commit see psb_intel_lvds_commit */ | |
| encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); | |
| } | |
| void psb_intel_encoder_destroy(struct drm_encoder *encoder) | |
| { | |
| struct psb_intel_encoder *intel_encoder = to_psb_intel_encoder(encoder); | |
| drm_encoder_cleanup(encoder); | |
| kfree(intel_encoder); | |
| } | |
| static bool psb_intel_crtc_mode_fixup(struct drm_crtc *crtc, | |
| const struct drm_display_mode *mode, | |
| struct drm_display_mode *adjusted_mode) | |
| { | |
| return true; | |
| } | |
| /** | |
| * Return the pipe currently connected to the panel fitter, | |
| * or -1 if the panel fitter is not present or not in use | |
| */ | |
| static int psb_intel_panel_fitter_pipe(struct drm_device *dev) | |
| { | |
| u32 pfit_control; | |
| pfit_control = REG_READ(PFIT_CONTROL); | |
| /* See if the panel fitter is in use */ | |
| if ((pfit_control & PFIT_ENABLE) == 0) | |
| return -1; | |
| /* Must be on PIPE 1 for PSB */ | |
| return 1; | |
| } | |
| static int psb_intel_crtc_mode_set(struct drm_crtc *crtc, | |
| struct drm_display_mode *mode, | |
| struct drm_display_mode *adjusted_mode, | |
| int x, int y, | |
| struct drm_framebuffer *old_fb) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); | |
| struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; | |
| int pipe = psb_intel_crtc->pipe; | |
| const struct psb_offset *map = &dev_priv->regmap[pipe]; | |
| int refclk; | |
| struct psb_intel_clock_t clock; | |
| u32 dpll = 0, fp = 0, dspcntr, pipeconf; | |
| bool ok, is_sdvo = false; | |
| bool is_lvds = false, is_tv = false; | |
| struct drm_mode_config *mode_config = &dev->mode_config; | |
| struct drm_connector *connector; | |
| /* No scan out no play */ | |
| if (crtc->fb == NULL) { | |
| crtc_funcs->mode_set_base(crtc, x, y, old_fb); | |
| return 0; | |
| } | |
| list_for_each_entry(connector, &mode_config->connector_list, head) { | |
| struct psb_intel_encoder *psb_intel_encoder = | |
| psb_intel_attached_encoder(connector); | |
| if (!connector->encoder | |
| || connector->encoder->crtc != crtc) | |
| continue; | |
| switch (psb_intel_encoder->type) { | |
| case INTEL_OUTPUT_LVDS: | |
| is_lvds = true; | |
| break; | |
| case INTEL_OUTPUT_SDVO: | |
| is_sdvo = true; | |
| break; | |
| case INTEL_OUTPUT_TVOUT: | |
| is_tv = true; | |
| break; | |
| } | |
| } | |
| refclk = 96000; | |
| ok = psb_intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, | |
| &clock); | |
| if (!ok) { | |
| dev_err(dev->dev, "Couldn't find PLL settings for mode!\n"); | |
| return 0; | |
| } | |
| fp = clock.n << 16 | clock.m1 << 8 | clock.m2; | |
| dpll = DPLL_VGA_MODE_DIS; | |
| if (is_lvds) { | |
| dpll |= DPLLB_MODE_LVDS; | |
| dpll |= DPLL_DVO_HIGH_SPEED; | |
| } else | |
| dpll |= DPLLB_MODE_DAC_SERIAL; | |
| if (is_sdvo) { | |
| int sdvo_pixel_multiply = | |
| adjusted_mode->clock / mode->clock; | |
| dpll |= DPLL_DVO_HIGH_SPEED; | |
| dpll |= | |
| (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; | |
| } | |
| /* compute bitmask from p1 value */ | |
| dpll |= (1 << (clock.p1 - 1)) << 16; | |
| switch (clock.p2) { | |
| case 5: | |
| dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; | |
| break; | |
| case 7: | |
| dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; | |
| break; | |
| case 10: | |
| dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; | |
| break; | |
| case 14: | |
| dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; | |
| break; | |
| } | |
| if (is_tv) { | |
| /* XXX: just matching BIOS for now */ | |
| /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ | |
| dpll |= 3; | |
| } | |
| dpll |= PLL_REF_INPUT_DREFCLK; | |
| /* setup pipeconf */ | |
| pipeconf = REG_READ(map->conf); | |
| /* Set up the display plane register */ | |
| dspcntr = DISPPLANE_GAMMA_ENABLE; | |
| if (pipe == 0) | |
| dspcntr |= DISPPLANE_SEL_PIPE_A; | |
| else | |
| dspcntr |= DISPPLANE_SEL_PIPE_B; | |
| dspcntr |= DISPLAY_PLANE_ENABLE; | |
| pipeconf |= PIPEACONF_ENABLE; | |
| dpll |= DPLL_VCO_ENABLE; | |
| /* Disable the panel fitter if it was on our pipe */ | |
| if (psb_intel_panel_fitter_pipe(dev) == pipe) | |
| REG_WRITE(PFIT_CONTROL, 0); | |
| drm_mode_debug_printmodeline(mode); | |
| if (dpll & DPLL_VCO_ENABLE) { | |
| REG_WRITE(map->fp0, fp); | |
| REG_WRITE(map->dpll, dpll & ~DPLL_VCO_ENABLE); | |
| REG_READ(map->dpll); | |
| udelay(150); | |
| } | |
| /* The LVDS pin pair needs to be on before the DPLLs are enabled. | |
| * This is an exception to the general rule that mode_set doesn't turn | |
| * things on. | |
| */ | |
| if (is_lvds) { | |
| u32 lvds = REG_READ(LVDS); | |
| lvds &= ~LVDS_PIPEB_SELECT; | |
| if (pipe == 1) | |
| lvds |= LVDS_PIPEB_SELECT; | |
| lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; | |
| /* Set the B0-B3 data pairs corresponding to | |
| * whether we're going to | |
| * set the DPLLs for dual-channel mode or not. | |
| */ | |
| lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); | |
| if (clock.p2 == 7) | |
| lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; | |
| /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) | |
| * appropriately here, but we need to look more | |
| * thoroughly into how panels behave in the two modes. | |
| */ | |
| REG_WRITE(LVDS, lvds); | |
| REG_READ(LVDS); | |
| } | |
| REG_WRITE(map->fp0, fp); | |
| REG_WRITE(map->dpll, dpll); | |
| REG_READ(map->dpll); | |
| /* Wait for the clocks to stabilize. */ | |
| udelay(150); | |
| /* write it again -- the BIOS does, after all */ | |
| REG_WRITE(map->dpll, dpll); | |
| REG_READ(map->dpll); | |
| /* Wait for the clocks to stabilize. */ | |
| udelay(150); | |
| REG_WRITE(map->htotal, (adjusted_mode->crtc_hdisplay - 1) | | |
| ((adjusted_mode->crtc_htotal - 1) << 16)); | |
| REG_WRITE(map->hblank, (adjusted_mode->crtc_hblank_start - 1) | | |
| ((adjusted_mode->crtc_hblank_end - 1) << 16)); | |
| REG_WRITE(map->hsync, (adjusted_mode->crtc_hsync_start - 1) | | |
| ((adjusted_mode->crtc_hsync_end - 1) << 16)); | |
| REG_WRITE(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) | | |
| ((adjusted_mode->crtc_vtotal - 1) << 16)); | |
| REG_WRITE(map->vblank, (adjusted_mode->crtc_vblank_start - 1) | | |
| ((adjusted_mode->crtc_vblank_end - 1) << 16)); | |
| REG_WRITE(map->vsync, (adjusted_mode->crtc_vsync_start - 1) | | |
| ((adjusted_mode->crtc_vsync_end - 1) << 16)); | |
| /* pipesrc and dspsize control the size that is scaled from, | |
| * which should always be the user's requested size. | |
| */ | |
| REG_WRITE(map->size, | |
| ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); | |
| REG_WRITE(map->pos, 0); | |
| REG_WRITE(map->src, | |
| ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); | |
| REG_WRITE(map->conf, pipeconf); | |
| REG_READ(map->conf); | |
| psb_intel_wait_for_vblank(dev); | |
| REG_WRITE(map->cntr, dspcntr); | |
| /* Flush the plane changes */ | |
| crtc_funcs->mode_set_base(crtc, x, y, old_fb); | |
| psb_intel_wait_for_vblank(dev); | |
| return 0; | |
| } | |
| /** Loads the palette/gamma unit for the CRTC with the prepared values */ | |
| void psb_intel_crtc_load_lut(struct drm_crtc *crtc) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); | |
| const struct psb_offset *map = &dev_priv->regmap[psb_intel_crtc->pipe]; | |
| int palreg = map->palette; | |
| int i; | |
| /* The clocks have to be on to load the palette. */ | |
| if (!crtc->enabled) | |
| return; | |
| switch (psb_intel_crtc->pipe) { | |
| case 0: | |
| case 1: | |
| break; | |
| default: | |
| dev_err(dev->dev, "Illegal Pipe Number.\n"); | |
| return; | |
| } | |
| if (gma_power_begin(dev, false)) { | |
| for (i = 0; i < 256; i++) { | |
| REG_WRITE(palreg + 4 * i, | |
| ((psb_intel_crtc->lut_r[i] + | |
| psb_intel_crtc->lut_adj[i]) << 16) | | |
| ((psb_intel_crtc->lut_g[i] + | |
| psb_intel_crtc->lut_adj[i]) << 8) | | |
| (psb_intel_crtc->lut_b[i] + | |
| psb_intel_crtc->lut_adj[i])); | |
| } | |
| gma_power_end(dev); | |
| } else { | |
| for (i = 0; i < 256; i++) { | |
| dev_priv->regs.pipe[0].palette[i] = | |
| ((psb_intel_crtc->lut_r[i] + | |
| psb_intel_crtc->lut_adj[i]) << 16) | | |
| ((psb_intel_crtc->lut_g[i] + | |
| psb_intel_crtc->lut_adj[i]) << 8) | | |
| (psb_intel_crtc->lut_b[i] + | |
| psb_intel_crtc->lut_adj[i]); | |
| } | |
| } | |
| } | |
| /** | |
| * Save HW states of giving crtc | |
| */ | |
| static void psb_intel_crtc_save(struct drm_crtc *crtc) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); | |
| struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state; | |
| const struct psb_offset *map = &dev_priv->regmap[psb_intel_crtc->pipe]; | |
| uint32_t paletteReg; | |
| int i; | |
| if (!crtc_state) { | |
| dev_err(dev->dev, "No CRTC state found\n"); | |
| return; | |
| } | |
| crtc_state->saveDSPCNTR = REG_READ(map->cntr); | |
| crtc_state->savePIPECONF = REG_READ(map->conf); | |
| crtc_state->savePIPESRC = REG_READ(map->src); | |
| crtc_state->saveFP0 = REG_READ(map->fp0); | |
| crtc_state->saveFP1 = REG_READ(map->fp1); | |
| crtc_state->saveDPLL = REG_READ(map->dpll); | |
| crtc_state->saveHTOTAL = REG_READ(map->htotal); | |
| crtc_state->saveHBLANK = REG_READ(map->hblank); | |
| crtc_state->saveHSYNC = REG_READ(map->hsync); | |
| crtc_state->saveVTOTAL = REG_READ(map->vtotal); | |
| crtc_state->saveVBLANK = REG_READ(map->vblank); | |
| crtc_state->saveVSYNC = REG_READ(map->vsync); | |
| crtc_state->saveDSPSTRIDE = REG_READ(map->stride); | |
| /*NOTE: DSPSIZE DSPPOS only for psb*/ | |
| crtc_state->saveDSPSIZE = REG_READ(map->size); | |
| crtc_state->saveDSPPOS = REG_READ(map->pos); | |
| crtc_state->saveDSPBASE = REG_READ(map->base); | |
| paletteReg = map->palette; | |
| for (i = 0; i < 256; ++i) | |
| crtc_state->savePalette[i] = REG_READ(paletteReg + (i << 2)); | |
| } | |
| /** | |
| * Restore HW states of giving crtc | |
| */ | |
| static void psb_intel_crtc_restore(struct drm_crtc *crtc) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); | |
| struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state; | |
| const struct psb_offset *map = &dev_priv->regmap[psb_intel_crtc->pipe]; | |
| uint32_t paletteReg; | |
| int i; | |
| if (!crtc_state) { | |
| dev_err(dev->dev, "No crtc state\n"); | |
| return; | |
| } | |
| if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) { | |
| REG_WRITE(map->dpll, | |
| crtc_state->saveDPLL & ~DPLL_VCO_ENABLE); | |
| REG_READ(map->dpll); | |
| udelay(150); | |
| } | |
| REG_WRITE(map->fp0, crtc_state->saveFP0); | |
| REG_READ(map->fp0); | |
| REG_WRITE(map->fp1, crtc_state->saveFP1); | |
| REG_READ(map->fp1); | |
| REG_WRITE(map->dpll, crtc_state->saveDPLL); | |
| REG_READ(map->dpll); | |
| udelay(150); | |
| REG_WRITE(map->htotal, crtc_state->saveHTOTAL); | |
| REG_WRITE(map->hblank, crtc_state->saveHBLANK); | |
| REG_WRITE(map->hsync, crtc_state->saveHSYNC); | |
| REG_WRITE(map->vtotal, crtc_state->saveVTOTAL); | |
| REG_WRITE(map->vblank, crtc_state->saveVBLANK); | |
| REG_WRITE(map->vsync, crtc_state->saveVSYNC); | |
| REG_WRITE(map->stride, crtc_state->saveDSPSTRIDE); | |
| REG_WRITE(map->size, crtc_state->saveDSPSIZE); | |
| REG_WRITE(map->pos, crtc_state->saveDSPPOS); | |
| REG_WRITE(map->src, crtc_state->savePIPESRC); | |
| REG_WRITE(map->base, crtc_state->saveDSPBASE); | |
| REG_WRITE(map->conf, crtc_state->savePIPECONF); | |
| psb_intel_wait_for_vblank(dev); | |
| REG_WRITE(map->cntr, crtc_state->saveDSPCNTR); | |
| REG_WRITE(map->base, crtc_state->saveDSPBASE); | |
| psb_intel_wait_for_vblank(dev); | |
| paletteReg = map->palette; | |
| for (i = 0; i < 256; ++i) | |
| REG_WRITE(paletteReg + (i << 2), crtc_state->savePalette[i]); | |
| } | |
| static int psb_intel_crtc_cursor_set(struct drm_crtc *crtc, | |
| struct drm_file *file_priv, | |
| uint32_t handle, | |
| uint32_t width, uint32_t height) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); | |
| int pipe = psb_intel_crtc->pipe; | |
| uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; | |
| uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; | |
| uint32_t temp; | |
| size_t addr = 0; | |
| struct gtt_range *gt; | |
| struct gtt_range *cursor_gt = psb_intel_crtc->cursor_gt; | |
| struct drm_gem_object *obj; | |
| void *tmp_dst, *tmp_src; | |
| int ret = 0, i, cursor_pages; | |
| /* if we want to turn of the cursor ignore width and height */ | |
| if (!handle) { | |
| /* turn off the cursor */ | |
| temp = CURSOR_MODE_DISABLE; | |
| if (gma_power_begin(dev, false)) { | |
| REG_WRITE(control, temp); | |
| REG_WRITE(base, 0); | |
| gma_power_end(dev); | |
| } | |
| /* Unpin the old GEM object */ | |
| if (psb_intel_crtc->cursor_obj) { | |
| gt = container_of(psb_intel_crtc->cursor_obj, | |
| struct gtt_range, gem); | |
| psb_gtt_unpin(gt); | |
| drm_gem_object_unreference(psb_intel_crtc->cursor_obj); | |
| psb_intel_crtc->cursor_obj = NULL; | |
| } | |
| return 0; | |
| } | |
| /* Currently we only support 64x64 cursors */ | |
| if (width != 64 || height != 64) { | |
| dev_dbg(dev->dev, "we currently only support 64x64 cursors\n"); | |
| return -EINVAL; | |
| } | |
| obj = drm_gem_object_lookup(dev, file_priv, handle); | |
| if (!obj) | |
| return -ENOENT; | |
| if (obj->size < width * height * 4) { | |
| dev_dbg(dev->dev, "buffer is to small\n"); | |
| ret = -ENOMEM; | |
| goto unref_cursor; | |
| } | |
| gt = container_of(obj, struct gtt_range, gem); | |
| /* Pin the memory into the GTT */ | |
| ret = psb_gtt_pin(gt); | |
| if (ret) { | |
| dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle); | |
| goto unref_cursor; | |
| } | |
| if (dev_priv->ops->cursor_needs_phys) { | |
| if (cursor_gt == NULL) { | |
| dev_err(dev->dev, "No hardware cursor mem available"); | |
| ret = -ENOMEM; | |
| goto unref_cursor; | |
| } | |
| /* Prevent overflow */ | |
| if (gt->npage > 4) | |
| cursor_pages = 4; | |
| else | |
| cursor_pages = gt->npage; | |
| /* Copy the cursor to cursor mem */ | |
| tmp_dst = dev_priv->vram_addr + cursor_gt->offset; | |
| for (i = 0; i < cursor_pages; i++) { | |
| tmp_src = kmap(gt->pages[i]); | |
| memcpy(tmp_dst, tmp_src, PAGE_SIZE); | |
| kunmap(gt->pages[i]); | |
| tmp_dst += PAGE_SIZE; | |
| } | |
| addr = psb_intel_crtc->cursor_addr; | |
| } else { | |
| addr = gt->offset; /* Or resource.start ??? */ | |
| psb_intel_crtc->cursor_addr = addr; | |
| } | |
| temp = 0; | |
| /* set the pipe for the cursor */ | |
| temp |= (pipe << 28); | |
| temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; | |
| if (gma_power_begin(dev, false)) { | |
| REG_WRITE(control, temp); | |
| REG_WRITE(base, addr); | |
| gma_power_end(dev); | |
| } | |
| /* unpin the old bo */ | |
| if (psb_intel_crtc->cursor_obj) { | |
| gt = container_of(psb_intel_crtc->cursor_obj, | |
| struct gtt_range, gem); | |
| psb_gtt_unpin(gt); | |
| drm_gem_object_unreference(psb_intel_crtc->cursor_obj); | |
| } | |
| psb_intel_crtc->cursor_obj = obj; | |
| return ret; | |
| unref_cursor: | |
| drm_gem_object_unreference(obj); | |
| return ret; | |
| } | |
| static int psb_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) | |
| { | |
| struct drm_device *dev = crtc->dev; | |
| struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); | |
| int pipe = psb_intel_crtc->pipe; | |
| uint32_t temp = 0; | |
| uint32_t addr; | |
| if (x < 0) { | |
| temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT); | |
| x = -x; | |
| } | |
| if (y < 0) { | |
| temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT); | |
| y = -y; | |
| } | |
| temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT); | |
| temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT); | |
| addr = psb_intel_crtc->cursor_addr; | |
| if (gma_power_begin(dev, false)) { | |
| REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp); | |
| REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr); | |
| gma_power_end(dev); | |
| } | |
| return 0; | |
| } | |
| static void psb_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, | |
| u16 *green, u16 *blue, uint32_t type, uint32_t size) | |
| { | |
| struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); | |
| int i; | |
| if (size != 256) | |
| return; | |
| for (i = 0; i < 256; i++) { | |
| psb_intel_crtc->lut_r[i] = red[i] >> 8; | |
| psb_intel_crtc->lut_g[i] = green[i] >> 8; | |
| psb_intel_crtc->lut_b[i] = blue[i] >> 8; | |
| } | |
| psb_intel_crtc_load_lut(crtc); | |
| } | |
| static int psb_crtc_set_config(struct drm_mode_set *set) | |
| { | |
| int ret; | |
| struct drm_device *dev = set->crtc->dev; | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| if (!dev_priv->rpm_enabled) | |
| return drm_crtc_helper_set_config(set); | |
| pm_runtime_forbid(&dev->pdev->dev); | |
| ret = drm_crtc_helper_set_config(set); | |
| pm_runtime_allow(&dev->pdev->dev); | |
| return ret; | |
| } | |
| /* Returns the clock of the currently programmed mode of the given pipe. */ | |
| static int psb_intel_crtc_clock_get(struct drm_device *dev, | |
| struct drm_crtc *crtc) | |
| { | |
| struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| int pipe = psb_intel_crtc->pipe; | |
| const struct psb_offset *map = &dev_priv->regmap[pipe]; | |
| u32 dpll; | |
| u32 fp; | |
| struct psb_intel_clock_t clock; | |
| bool is_lvds; | |
| struct psb_pipe *p = &dev_priv->regs.pipe[pipe]; | |
| if (gma_power_begin(dev, false)) { | |
| dpll = REG_READ(map->dpll); | |
| if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) | |
| fp = REG_READ(map->fp0); | |
| else | |
| fp = REG_READ(map->fp1); | |
| is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN); | |
| gma_power_end(dev); | |
| } else { | |
| dpll = p->dpll; | |
| if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) | |
| fp = p->fp0; | |
| else | |
| fp = p->fp1; | |
| is_lvds = (pipe == 1) && (dev_priv->regs.psb.saveLVDS & | |
| LVDS_PORT_EN); | |
| } | |
| clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; | |
| clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; | |
| clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; | |
| if (is_lvds) { | |
| clock.p1 = | |
| ffs((dpll & | |
| DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> | |
| DPLL_FPA01_P1_POST_DIV_SHIFT); | |
| clock.p2 = 14; | |
| if ((dpll & PLL_REF_INPUT_MASK) == | |
| PLLB_REF_INPUT_SPREADSPECTRUMIN) { | |
| /* XXX: might not be 66MHz */ | |
| psb_intel_clock(66000, &clock); | |
| } else | |
| psb_intel_clock(48000, &clock); | |
| } else { | |
| if (dpll & PLL_P1_DIVIDE_BY_TWO) | |
| clock.p1 = 2; | |
| else { | |
| clock.p1 = | |
| ((dpll & | |
| DPLL_FPA01_P1_POST_DIV_MASK_I830) >> | |
| DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; | |
| } | |
| if (dpll & PLL_P2_DIVIDE_BY_4) | |
| clock.p2 = 4; | |
| else | |
| clock.p2 = 2; | |
| psb_intel_clock(48000, &clock); | |
| } | |
| /* XXX: It would be nice to validate the clocks, but we can't reuse | |
| * i830PllIsValid() because it relies on the xf86_config connector | |
| * configuration being accurate, which it isn't necessarily. | |
| */ | |
| return clock.dot; | |
| } | |
| /** Returns the currently programmed mode of the given pipe. */ | |
| struct drm_display_mode *psb_intel_crtc_mode_get(struct drm_device *dev, | |
| struct drm_crtc *crtc) | |
| { | |
| struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); | |
| int pipe = psb_intel_crtc->pipe; | |
| struct drm_display_mode *mode; | |
| int htot; | |
| int hsync; | |
| int vtot; | |
| int vsync; | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| struct psb_pipe *p = &dev_priv->regs.pipe[pipe]; | |
| const struct psb_offset *map = &dev_priv->regmap[pipe]; | |
| if (gma_power_begin(dev, false)) { | |
| htot = REG_READ(map->htotal); | |
| hsync = REG_READ(map->hsync); | |
| vtot = REG_READ(map->vtotal); | |
| vsync = REG_READ(map->vsync); | |
| gma_power_end(dev); | |
| } else { | |
| htot = p->htotal; | |
| hsync = p->hsync; | |
| vtot = p->vtotal; | |
| vsync = p->vsync; | |
| } | |
| mode = kzalloc(sizeof(*mode), GFP_KERNEL); | |
| if (!mode) | |
| return NULL; | |
| mode->clock = psb_intel_crtc_clock_get(dev, crtc); | |
| mode->hdisplay = (htot & 0xffff) + 1; | |
| mode->htotal = ((htot & 0xffff0000) >> 16) + 1; | |
| mode->hsync_start = (hsync & 0xffff) + 1; | |
| mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1; | |
| mode->vdisplay = (vtot & 0xffff) + 1; | |
| mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1; | |
| mode->vsync_start = (vsync & 0xffff) + 1; | |
| mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1; | |
| drm_mode_set_name(mode); | |
| drm_mode_set_crtcinfo(mode, 0); | |
| return mode; | |
| } | |
| static void psb_intel_crtc_destroy(struct drm_crtc *crtc) | |
| { | |
| struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); | |
| struct gtt_range *gt; | |
| /* Unpin the old GEM object */ | |
| if (psb_intel_crtc->cursor_obj) { | |
| gt = container_of(psb_intel_crtc->cursor_obj, | |
| struct gtt_range, gem); | |
| psb_gtt_unpin(gt); | |
| drm_gem_object_unreference(psb_intel_crtc->cursor_obj); | |
| psb_intel_crtc->cursor_obj = NULL; | |
| } | |
| if (psb_intel_crtc->cursor_gt != NULL) | |
| psb_gtt_free_range(crtc->dev, psb_intel_crtc->cursor_gt); | |
| kfree(psb_intel_crtc->crtc_state); | |
| drm_crtc_cleanup(crtc); | |
| kfree(psb_intel_crtc); | |
| } | |
| static void psb_intel_crtc_disable(struct drm_crtc *crtc) | |
| { | |
| struct gtt_range *gt; | |
| struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; | |
| crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); | |
| if (crtc->fb) { | |
| gt = to_psb_fb(crtc->fb)->gtt; | |
| psb_gtt_unpin(gt); | |
| } | |
| } | |
| const struct drm_crtc_helper_funcs psb_intel_helper_funcs = { | |
| .dpms = psb_intel_crtc_dpms, | |
| .mode_fixup = psb_intel_crtc_mode_fixup, | |
| .mode_set = psb_intel_crtc_mode_set, | |
| .mode_set_base = psb_intel_pipe_set_base, | |
| .prepare = psb_intel_crtc_prepare, | |
| .commit = psb_intel_crtc_commit, | |
| .disable = psb_intel_crtc_disable, | |
| }; | |
| const struct drm_crtc_funcs psb_intel_crtc_funcs = { | |
| .save = psb_intel_crtc_save, | |
| .restore = psb_intel_crtc_restore, | |
| .cursor_set = psb_intel_crtc_cursor_set, | |
| .cursor_move = psb_intel_crtc_cursor_move, | |
| .gamma_set = psb_intel_crtc_gamma_set, | |
| .set_config = psb_crtc_set_config, | |
| .destroy = psb_intel_crtc_destroy, | |
| }; | |
| /* | |
| * Set the default value of cursor control and base register | |
| * to zero. This is a workaround for h/w defect on Oaktrail | |
| */ | |
| static void psb_intel_cursor_init(struct drm_device *dev, | |
| struct psb_intel_crtc *psb_intel_crtc) | |
| { | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| u32 control[3] = { CURACNTR, CURBCNTR, CURCCNTR }; | |
| u32 base[3] = { CURABASE, CURBBASE, CURCBASE }; | |
| struct gtt_range *cursor_gt; | |
| if (dev_priv->ops->cursor_needs_phys) { | |
| /* Allocate 4 pages of stolen mem for a hardware cursor. That | |
| * is enough for the 64 x 64 ARGB cursors we support. | |
| */ | |
| cursor_gt = psb_gtt_alloc_range(dev, 4 * PAGE_SIZE, "cursor", 1); | |
| if (!cursor_gt) { | |
| psb_intel_crtc->cursor_gt = NULL; | |
| goto out; | |
| } | |
| psb_intel_crtc->cursor_gt = cursor_gt; | |
| psb_intel_crtc->cursor_addr = dev_priv->stolen_base + | |
| cursor_gt->offset; | |
| } else { | |
| psb_intel_crtc->cursor_gt = NULL; | |
| } | |
| out: | |
| REG_WRITE(control[psb_intel_crtc->pipe], 0); | |
| REG_WRITE(base[psb_intel_crtc->pipe], 0); | |
| } | |
| void psb_intel_crtc_init(struct drm_device *dev, int pipe, | |
| struct psb_intel_mode_device *mode_dev) | |
| { | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| struct psb_intel_crtc *psb_intel_crtc; | |
| int i; | |
| uint16_t *r_base, *g_base, *b_base; | |
| /* We allocate a extra array of drm_connector pointers | |
| * for fbdev after the crtc */ | |
| psb_intel_crtc = | |
| kzalloc(sizeof(struct psb_intel_crtc) + | |
| (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), | |
| GFP_KERNEL); | |
| if (psb_intel_crtc == NULL) | |
| return; | |
| psb_intel_crtc->crtc_state = | |
| kzalloc(sizeof(struct psb_intel_crtc_state), GFP_KERNEL); | |
| if (!psb_intel_crtc->crtc_state) { | |
| dev_err(dev->dev, "Crtc state error: No memory\n"); | |
| kfree(psb_intel_crtc); | |
| return; | |
| } | |
| /* Set the CRTC operations from the chip specific data */ | |
| drm_crtc_init(dev, &psb_intel_crtc->base, dev_priv->ops->crtc_funcs); | |
| drm_mode_crtc_set_gamma_size(&psb_intel_crtc->base, 256); | |
| psb_intel_crtc->pipe = pipe; | |
| psb_intel_crtc->plane = pipe; | |
| r_base = psb_intel_crtc->base.gamma_store; | |
| g_base = r_base + 256; | |
| b_base = g_base + 256; | |
| for (i = 0; i < 256; i++) { | |
| psb_intel_crtc->lut_r[i] = i; | |
| psb_intel_crtc->lut_g[i] = i; | |
| psb_intel_crtc->lut_b[i] = i; | |
| r_base[i] = i << 8; | |
| g_base[i] = i << 8; | |
| b_base[i] = i << 8; | |
| psb_intel_crtc->lut_adj[i] = 0; | |
| } | |
| psb_intel_crtc->mode_dev = mode_dev; | |
| psb_intel_crtc->cursor_addr = 0; | |
| drm_crtc_helper_add(&psb_intel_crtc->base, | |
| dev_priv->ops->crtc_helper); | |
| /* Setup the array of drm_connector pointer array */ | |
| psb_intel_crtc->mode_set.crtc = &psb_intel_crtc->base; | |
| BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) || | |
| dev_priv->plane_to_crtc_mapping[psb_intel_crtc->plane] != NULL); | |
| dev_priv->plane_to_crtc_mapping[psb_intel_crtc->plane] = | |
| &psb_intel_crtc->base; | |
| dev_priv->pipe_to_crtc_mapping[psb_intel_crtc->pipe] = | |
| &psb_intel_crtc->base; | |
| psb_intel_crtc->mode_set.connectors = | |
| (struct drm_connector **) (psb_intel_crtc + 1); | |
| psb_intel_crtc->mode_set.num_connectors = 0; | |
| psb_intel_cursor_init(dev, psb_intel_crtc); | |
| /* Set to true so that the pipe is forced off on initial config. */ | |
| psb_intel_crtc->active = true; | |
| } | |
| int psb_intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, | |
| struct drm_file *file_priv) | |
| { | |
| struct drm_psb_private *dev_priv = dev->dev_private; | |
| struct drm_psb_get_pipe_from_crtc_id_arg *pipe_from_crtc_id = data; | |
| struct drm_mode_object *drmmode_obj; | |
| struct psb_intel_crtc *crtc; | |
| if (!dev_priv) { | |
| dev_err(dev->dev, "called with no initialization\n"); | |
| return -EINVAL; | |
| } | |
| drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id, | |
| DRM_MODE_OBJECT_CRTC); | |
| if (!drmmode_obj) { | |
| dev_err(dev->dev, "no such CRTC id\n"); | |
| return -EINVAL; | |
| } | |
| crtc = to_psb_intel_crtc(obj_to_crtc(drmmode_obj)); | |
| pipe_from_crtc_id->pipe = crtc->pipe; | |
| return 0; | |
| } | |
| struct drm_crtc *psb_intel_get_crtc_from_pipe(struct drm_device *dev, int pipe) | |
| { | |
| struct drm_crtc *crtc = NULL; | |
| list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { | |
| struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); | |
| if (psb_intel_crtc->pipe == pipe) | |
| break; | |
| } | |
| return crtc; | |
| } | |
| int psb_intel_connector_clones(struct drm_device *dev, int type_mask) | |
| { | |
| int index_mask = 0; | |
| struct drm_connector *connector; | |
| int entry = 0; | |
| list_for_each_entry(connector, &dev->mode_config.connector_list, | |
| head) { | |
| struct psb_intel_encoder *psb_intel_encoder = | |
| psb_intel_attached_encoder(connector); | |
| if (type_mask & (1 << psb_intel_encoder->type)) | |
| index_mask |= (1 << entry); | |
| entry++; | |
| } | |
| return index_mask; | |
| } | |
| /* current intel driver doesn't take advantage of encoders | |
| always give back the encoder for the connector | |
| */ | |
| struct drm_encoder *psb_intel_best_encoder(struct drm_connector *connector) | |
| { | |
| struct psb_intel_encoder *psb_intel_encoder = | |
| psb_intel_attached_encoder(connector); | |
| return &psb_intel_encoder->base; | |
| } | |
| void psb_intel_connector_attach_encoder(struct psb_intel_connector *connector, | |
| struct psb_intel_encoder *encoder) | |
| { | |
| connector->encoder = encoder; | |
| drm_mode_connector_attach_encoder(&connector->base, | |
| &encoder->base); | |
| } |