| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2017~2018 NXP |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| / { |
| chosen { |
| bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200"; |
| stdout-path = &lpuart0; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_leds>; |
| user { |
| label = "heartbeat"; |
| gpios = <&gpio2 15 0>; |
| default-state = "on"; |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| |
| modem_reset: modem-reset { |
| compatible = "gpio-reset"; |
| reset-gpios = <&pca9557_b 7 GPIO_ACTIVE_LOW>; |
| reset-delay-us = <2000>; |
| reset-post-delay-ms = <40>; |
| #reset-cells = <0>; |
| }; |
| |
| regulators { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| reg_audio: regulator@0 { |
| compatible = "regulator-fixed"; |
| reg = <2>; |
| regulator-name = "cs42888_supply"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_can_en: regulator-can-gen { |
| compatible = "regulator-fixed"; |
| regulator-name = "can-en"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&pca9557_b 5 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_can_stby: regulator-can-stby { |
| compatible = "regulator-fixed"; |
| regulator-name = "can-stby"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&pca9557_b 4 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| vin-supply = <®_can_en>; |
| }; |
| |
| reg_fec2_supply: fec2_nvcc { |
| compatible = "regulator-fixed"; |
| regulator-name = "fec2_nvcc"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| gpio = <&max7322 0 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usdhc2_vmmc: usdhc2_vmmc { |
| compatible = "regulator-fixed"; |
| regulator-name = "sw-3p3-sd1"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; |
| off-on-delay = <3000>; |
| enable-active-high; |
| }; |
| }; |
| |
| sound-cs42888 { |
| compatible = "fsl,imx8qm-sabreauto-cs42888", |
| "fsl,imx-audio-cs42888"; |
| model = "imx-cs42888"; |
| esai-controller = <&esai0>; |
| audio-codec = <&codec>; |
| asrc-controller = <&asrc0>; |
| }; |
| |
| sound-amix-sai { |
| compatible = "fsl,imx-audio-amix"; |
| model = "amix-audio-sai"; |
| dais = <&sai6>, <&sai7>; |
| amix-controller = <&amix>; |
| }; |
| |
| lvds_backlight0: lvds_backlight@0 { |
| compatible = "pwm-backlight"; |
| pwms = <&lvds0_pwm 0 100000 0>; |
| |
| brightness-levels = < 0 1 2 3 4 5 6 7 8 9 |
| 10 11 12 13 14 15 16 17 18 19 |
| 20 21 22 23 24 25 26 27 28 29 |
| 30 31 32 33 34 35 36 37 38 39 |
| 40 41 42 43 44 45 46 47 48 49 |
| 50 51 52 53 54 55 56 57 58 59 |
| 60 61 62 63 64 65 66 67 68 69 |
| 70 71 72 73 74 75 76 77 78 79 |
| 80 81 82 83 84 85 86 87 88 89 |
| 90 91 92 93 94 95 96 97 98 99 |
| 100>; |
| default-brightness-level = <80>; |
| }; |
| |
| lvds_backlight1: lvds_backlight@1 { |
| compatible = "pwm-backlight"; |
| pwms = <&lvds1_pwm 0 100000 0>; |
| |
| brightness-levels = < 0 1 2 3 4 5 6 7 8 9 |
| 10 11 12 13 14 15 16 17 18 19 |
| 20 21 22 23 24 25 26 27 28 29 |
| 30 31 32 33 34 35 36 37 38 39 |
| 40 41 42 43 44 45 46 47 48 49 |
| 50 51 52 53 54 55 56 57 58 59 |
| 60 61 62 63 64 65 66 67 68 69 |
| 70 71 72 73 74 75 76 77 78 79 |
| 80 81 82 83 84 85 86 87 88 89 |
| 90 91 92 93 94 95 96 97 98 99 |
| 100>; |
| default-brightness-level = <80>; |
| }; |
| }; |
| |
| &acm { |
| status = "okay"; |
| }; |
| |
| &amix { |
| status = "okay"; |
| }; |
| |
| &asrc0 { |
| assigned-clocks = <&clk IMX8QM_AUD_PLL0_DIV>, |
| <&clk IMX8QM_AUD_ACM_AUD_PLL_CLK0_DIV>, |
| <&clk IMX8QM_AUD_ACM_AUD_REC_CLK0_DIV>; |
| assigned-clock-rates = <786432000>, <49152000>, <24576000>; |
| fsl,asrc-rate = <48000>; |
| status = "okay"; |
| }; |
| |
| &asrc1 { |
| fsl,asrc-rate = <48000>; |
| assigned-clocks = <&clk IMX8QM_AUD_PLL0_DIV>, |
| <&clk IMX8QM_AUD_ACM_AUD_PLL_CLK0_DIV>, |
| <&clk IMX8QM_AUD_ACM_AUD_REC_CLK0_DIV>; |
| assigned-clock-rates = <786432000>, <49152000>, <24576000>; |
| status = "okay"; |
| }; |
| |
| &esai0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_esai0>; |
| assigned-clocks = <&clk IMX8QM_ACM_ESAI0_MCLK_SEL>, |
| <&clk IMX8QM_AUD_PLL0_DIV>, |
| <&clk IMX8QM_AUD_ACM_AUD_PLL_CLK0_DIV>, |
| <&clk IMX8QM_AUD_ACM_AUD_REC_CLK0_DIV>, |
| <&clk IMX8QM_AUD_ESAI_0_EXTAL_IPG>; |
| assigned-clock-parents = <&clk IMX8QM_AUD_ACM_AUD_PLL_CLK0_CLK>; |
| assigned-clock-rates = <0>, <786432000>, <49152000>, <24576000>, <49152000>; |
| status = "okay"; |
| }; |
| |
| &sai_hdmi_tx { |
| assigned-clocks =<&clk IMX8QM_ACM_HDMI_TX_SAI0_MCLK_SEL>, |
| <&clk IMX8QM_AUD_PLL0_DIV>, |
| <&clk IMX8QM_AUD_ACM_AUD_PLL_CLK0_DIV>, |
| <&clk IMX8QM_AUD_ACM_AUD_REC_CLK0_DIV>, |
| <&clk IMX8QM_AUD_SAI_HDMITX0_MCLK>; |
| assigned-clock-parents = <&clk IMX8QM_AUD_ACM_AUD_PLL_CLK0_CLK>; |
| assigned-clock-rates = <0>, <786432000>, <49152000>, <24576000>, <49152000>; |
| fsl,sai-asynchronous; |
| status = "okay"; |
| }; |
| |
| &sai6 { |
| assigned-clocks = <&clk IMX8QM_ACM_SAI6_MCLK_SEL>, |
| <&clk IMX8QM_AUD_PLL1_DIV>, |
| <&clk IMX8QM_AUD_ACM_AUD_PLL_CLK1_DIV>, |
| <&clk IMX8QM_AUD_ACM_AUD_REC_CLK1_DIV>, |
| <&clk IMX8QM_AUD_SAI_6_MCLK>; |
| assigned-clock-parents = <&clk IMX8QM_AUD_ACM_AUD_PLL_CLK1_CLK>; |
| assigned-clock-rates = <0>, <786432000>, <98304000>, <24576000>, <98304000>; |
| fsl,sai-asynchronous; |
| fsl,txm-rxs; |
| status = "okay"; |
| }; |
| |
| &sai7 { |
| assigned-clocks = <&clk IMX8QM_ACM_SAI7_MCLK_SEL>, |
| <&clk IMX8QM_AUD_PLL1_DIV>, |
| <&clk IMX8QM_AUD_ACM_AUD_PLL_CLK1_DIV>, |
| <&clk IMX8QM_AUD_ACM_AUD_REC_CLK1_DIV>, |
| <&clk IMX8QM_AUD_SAI_7_MCLK>; |
| assigned-clock-parents = <&clk IMX8QM_AUD_ACM_AUD_PLL_CLK1_CLK>; |
| assigned-clock-rates = <0>, <786432000>, <98304000>, <24576000>, <98304000>; |
| fsl,sai-asynchronous; |
| fsl,txm-rxs; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| imx8qm-arm2 { |
| |
| pinctrl_esai0: esai0grp { |
| fsl,pins = < |
| SC_P_ESAI0_FSR_AUD_ESAI0_FSR 0xc6000040 |
| SC_P_ESAI0_FST_AUD_ESAI0_FST 0xc6000040 |
| SC_P_ESAI0_SCKR_AUD_ESAI0_SCKR 0xc6000040 |
| SC_P_ESAI0_SCKT_AUD_ESAI0_SCKT 0xc6000040 |
| SC_P_ESAI0_TX0_AUD_ESAI0_TX0 0xc6000040 |
| SC_P_ESAI0_TX1_AUD_ESAI0_TX1 0xc6000040 |
| SC_P_ESAI0_TX2_RX3_AUD_ESAI0_TX2_RX3 0xc6000040 |
| SC_P_ESAI0_TX3_RX2_AUD_ESAI0_TX3_RX2 0xc6000040 |
| SC_P_ESAI0_TX4_RX1_AUD_ESAI0_TX4_RX1 0xc6000040 |
| SC_P_ESAI0_TX5_RX0_AUD_ESAI0_TX5_RX0 0xc6000040 |
| SC_P_MCLK_OUT0_AUD_ACM_MCLK_OUT0 0xc6000040 |
| >; |
| }; |
| |
| pinctrl_fec1: fec1grp { |
| fsl,pins = < |
| SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0 |
| SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020 |
| SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 |
| SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x00000060 |
| SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x00000060 |
| SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x00000060 |
| SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x00000060 |
| SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x00000060 |
| SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x00000060 |
| SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x00000060 |
| SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x00000060 |
| SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x00000060 |
| SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x00000060 |
| SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x00000060 |
| SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x00000060 |
| >; |
| }; |
| |
| pinctrl_fec2: fec2grp { |
| fsl,pins = < |
| SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0 |
| SC_P_ENET1_MDC_CONN_ENET1_MDC 0x06000020 |
| SC_P_ENET1_MDIO_CONN_ENET1_MDIO 0x06000020 |
| SC_P_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL 0x00000060 |
| SC_P_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC 0x00000060 |
| SC_P_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0 0x00000060 |
| SC_P_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1 0x00000060 |
| SC_P_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2 0x00000060 |
| SC_P_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3 0x00000060 |
| SC_P_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC 0x00000060 |
| SC_P_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL 0x00000060 |
| SC_P_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0 0x00000060 |
| SC_P_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1 0x00000060 |
| SC_P_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2 0x00000060 |
| SC_P_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3 0x00000060 |
| >; |
| }; |
| |
| pinctrl_lvds0_lpi2c1: lvds0lpi2c1grp { |
| fsl,pins = < |
| SC_P_LVDS0_I2C1_SCL_LVDS0_I2C1_SCL 0xc600004c |
| SC_P_LVDS0_I2C1_SDA_LVDS0_I2C1_SDA 0xc600004c |
| >; |
| }; |
| |
| pinctrl_lvds1_lpi2c1: lvds1lpi2c1grp { |
| fsl,pins = < |
| SC_P_LVDS1_I2C1_SCL_LVDS1_I2C1_SCL 0xc600004c |
| SC_P_LVDS1_I2C1_SDA_LVDS1_I2C1_SDA 0xc600004c |
| >; |
| }; |
| |
| pinctrl_hdmi_lpi2c0: hdmilpi2c0grp { |
| fsl,pins = < |
| SC_P_HDMI_TX0_TS_SCL_HDMI_TX0_I2C0_SCL 0xc600004c |
| SC_P_HDMI_TX0_TS_SDA_HDMI_TX0_I2C0_SDA 0xc600004c |
| >; |
| }; |
| |
| pinctrl_mipi0_lpi2c0: mipi0_lpi2c0grp { |
| fsl,pins = < |
| SC_P_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL 0xc600004c |
| SC_P_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA 0xc600004c |
| >; |
| }; |
| |
| pinctrl_mipi1_lpi2c0: mipi1_lpi2c0grp { |
| fsl,pins = < |
| SC_P_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL 0xc600004c |
| SC_P_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA 0xc600004c |
| >; |
| }; |
| |
| pinctrl_mipi_dsi_0_1_en: mipi_dsi_0_1_en { |
| fsl,pins = < |
| SC_P_LVDS0_I2C0_SDA_LSIO_GPIO1_IO07 0x00000021 |
| >; |
| }; |
| |
| pinctrl_lpi2c0: lpi2c0grp { |
| fsl,pins = < |
| SC_P_HDMI_TX0_TS_SCL_DMA_I2C0_SCL 0xc600004c |
| SC_P_HDMI_TX0_TS_SDA_DMA_I2C0_SDA 0xc600004c |
| >; |
| }; |
| |
| pinctrl_lpi2c1: lpi2c1grp { |
| fsl,pins = < |
| SC_P_GPT0_CLK_DMA_I2C1_SCL 0xc600004c |
| SC_P_GPT0_CAPTURE_DMA_I2C1_SDA 0xc600004c |
| >; |
| }; |
| |
| pinctrl_lpi2c2: lpi2c2grp { |
| fsl,pins = < |
| SC_P_GPT1_CLK_DMA_I2C2_SCL 0xc600004c |
| SC_P_GPT1_CAPTURE_DMA_I2C2_SDA 0xc600004c |
| >; |
| }; |
| |
| pinctrl_lpuart0: lpuart0grp { |
| fsl,pins = < |
| SC_P_UART0_RX_DMA_UART0_RX 0x06000020 |
| SC_P_UART0_TX_DMA_UART0_TX 0x06000020 |
| >; |
| }; |
| |
| pinctrl_lpuart1: lpuart1grp { |
| fsl,pins = < |
| SC_P_UART1_RX_DMA_UART1_RX 0x06000020 |
| SC_P_UART1_TX_DMA_UART1_TX 0x06000020 |
| SC_P_UART1_CTS_B_DMA_UART1_CTS_B 0x06000020 |
| SC_P_UART1_RTS_B_DMA_UART1_RTS_B 0x06000020 |
| >; |
| }; |
| |
| pinctrl_lpuart3: lpuart3grp { |
| fsl,pins = < |
| SC_P_M41_GPIO0_00_DMA_UART3_RX 0x06000020 |
| SC_P_M41_GPIO0_01_DMA_UART3_TX 0x06000020 |
| >; |
| }; |
| |
| pinctrl_mlb: mlbgrp { |
| fsl,pins = < |
| SC_P_MLB_SIG_CONN_MLB_SIG 0x21 |
| SC_P_MLB_CLK_CONN_MLB_CLK 0x21 |
| SC_P_MLB_DATA_CONN_MLB_DATA 0x21 |
| >; |
| }; |
| |
| pinctrl_isl29023: isl29023grp { |
| fsl,pins = < |
| SC_P_ADC_IN2_LSIO_GPIO3_IO20 0x00000021 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 |
| SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 |
| SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 |
| SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 |
| SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 |
| SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 |
| SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 |
| SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 |
| SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 |
| SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 |
| SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 |
| SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021 |
| >; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1grp100mhz { |
| fsl,pins = < |
| SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040 |
| SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020 |
| SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020 |
| SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020 |
| SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020 |
| SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020 |
| SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020 |
| SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020 |
| SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020 |
| SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020 |
| SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000040 |
| SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020 |
| >; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1grp200mhz { |
| fsl,pins = < |
| SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040 |
| SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020 |
| SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020 |
| SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020 |
| SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020 |
| SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020 |
| SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020 |
| SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020 |
| SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020 |
| SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020 |
| SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000040 |
| SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020 |
| >; |
| }; |
| |
| pinctrl_usdhc2_gpio: usdhc2grpgpio { |
| fsl,pins = < |
| SC_P_USDHC1_DATA6_LSIO_GPIO5_IO21 0x00000021 |
| SC_P_USDHC1_DATA7_LSIO_GPIO5_IO22 0x00000021 |
| SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO07 0x00000021 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 |
| SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 |
| SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 |
| SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 |
| SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 |
| SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 |
| SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 |
| >; |
| }; |
| |
| pinctrl_usdhc2_100mhz: usdhc2grp100mhz { |
| fsl,pins = < |
| SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040 |
| SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020 |
| SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020 |
| SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020 |
| SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020 |
| SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020 |
| SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000020 |
| >; |
| }; |
| |
| pinctrl_usdhc2_200mhz: usdhc2grp200mhz { |
| fsl,pins = < |
| SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040 |
| SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020 |
| SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020 |
| SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020 |
| SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020 |
| SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020 |
| SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000020 |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan0grp { |
| fsl,pins = < |
| SC_P_FLEXCAN0_TX_DMA_FLEXCAN0_TX 0x21 |
| SC_P_FLEXCAN0_RX_DMA_FLEXCAN0_RX 0x21 |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan1grp { |
| fsl,pins = < |
| SC_P_FLEXCAN1_TX_DMA_FLEXCAN1_TX 0x21 |
| SC_P_FLEXCAN1_RX_DMA_FLEXCAN1_RX 0x21 |
| >; |
| }; |
| |
| pinctrl_flexcan3: flexcan2grp { |
| fsl,pins = < |
| SC_P_FLEXCAN2_TX_DMA_FLEXCAN2_TX 0x21 |
| SC_P_FLEXCAN2_RX_DMA_FLEXCAN2_RX 0x21 |
| >; |
| }; |
| |
| pinctrl_flexspi0: flexspi0grp { |
| fsl,pins = < |
| SC_P_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 0x06000021 |
| SC_P_QSPI0A_DATA1_LSIO_QSPI0A_DATA1 0x06000021 |
| SC_P_QSPI0A_DATA2_LSIO_QSPI0A_DATA2 0x06000021 |
| SC_P_QSPI0A_DATA3_LSIO_QSPI0A_DATA3 0x06000021 |
| SC_P_QSPI0A_DQS_LSIO_QSPI0A_DQS 0x06000021 |
| SC_P_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B 0x06000021 |
| SC_P_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B 0x06000021 |
| SC_P_QSPI0A_SCLK_LSIO_QSPI0A_SCLK 0x06000021 |
| SC_P_QSPI0B_SCLK_LSIO_QSPI0B_SCLK 0x06000021 |
| SC_P_QSPI0B_DATA0_LSIO_QSPI0B_DATA0 0x06000021 |
| SC_P_QSPI0B_DATA1_LSIO_QSPI0B_DATA1 0x06000021 |
| SC_P_QSPI0B_DATA2_LSIO_QSPI0B_DATA2 0x06000021 |
| SC_P_QSPI0B_DATA3_LSIO_QSPI0B_DATA3 0x06000021 |
| SC_P_QSPI0B_DQS_LSIO_QSPI0B_DQS 0x06000021 |
| SC_P_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B 0x06000021 |
| SC_P_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021 |
| >; |
| }; |
| |
| pinctrl_gpio_leds: gpioledsgrp { |
| fsl,pins = < |
| SC_P_SPDIF0_TX_LSIO_GPIO2_IO15 0x00000021 |
| >; |
| }; |
| |
| pinctrl_pciea: pcieagrp{ |
| fsl,pins = < |
| SC_P_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO27 0x06000021 |
| SC_P_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO28 0x04000021 |
| SC_P_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO29 0x06000021 |
| >; |
| }; |
| |
| pinctrl_pcieb: pciebgrp{ |
| fsl,pins = < |
| SC_P_PCIE_CTRL1_CLKREQ_B_LSIO_GPIO4_IO30 0x06000021 |
| SC_P_PCIE_CTRL1_WAKE_B_LSIO_GPIO4_IO31 0x04000021 |
| SC_P_PCIE_CTRL1_PERST_B_LSIO_GPIO5_IO00 0x06000021 |
| >; |
| }; |
| |
| pinctrl_usbotg1: usbotg1 { |
| fsl,pins = < |
| SC_P_USB_SS3_TC0_CONN_USB_OTG1_PWR 0x00000021 |
| >; |
| }; |
| |
| pinctrl_lvds0_pwm0: lvds0pwm0grp { |
| fsl,pins = < |
| SC_P_LVDS0_GPIO00_LVDS0_PWM0_OUT 0x00000020 |
| >; |
| }; |
| |
| pinctrl_lvds1_pwm0: lvds1pwm0grp { |
| fsl,pins = < |
| SC_P_LVDS1_GPIO00_LVDS1_PWM0_OUT 0x00000020 |
| >; |
| }; |
| |
| pinctrl_mipi_csi0_gpio: mipicsi0gpiogrp{ |
| fsl,pins = < |
| SC_P_MIPI_CSI0_GPIO0_00_MIPI_CSI0_GPIO0_IO00 0x00000021 |
| SC_P_MIPI_CSI0_GPIO0_01_MIPI_CSI0_GPIO0_IO01 0x00000021 |
| >; |
| }; |
| |
| pinctrl_mipi_csi1_gpio: mipicsi1gpiogrp{ |
| fsl,pins = < |
| SC_P_MIPI_CSI1_GPIO0_00_MIPI_CSI1_GPIO0_IO00 0x00000021 |
| SC_P_MIPI_CSI1_GPIO0_01_MIPI_CSI1_GPIO0_IO01 0x00000021 |
| >; |
| }; |
| }; |
| }; |
| |
| &gpio2 { |
| status = "okay"; |
| }; |
| |
| &gpio5 { |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| bus-width = <8>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; |
| bus-width = <4>; |
| cd-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; |
| vmmc-supply = <®_usdhc2_vmmc>; |
| status = "okay"; |
| }; |
| |
| &usbotg1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg1>; |
| srp-disable; |
| hnp-disable; |
| adp-disable; |
| power-polarity-active-high; |
| disable-over-current; |
| status = "okay"; |
| }; |
| |
| &usbotg3 { |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec1>; |
| phy-mode = "rgmii-txid"; |
| phy-handle = <ðphy0>; |
| fsl,magic-packet; |
| fsl,rgmii_rxc_dly; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <0>; |
| at803x,eee-disabled; |
| at803x,vddio-1p8v; |
| }; |
| |
| ethphy1: ethernet-phy@1 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <1>; |
| at803x,eee-disabled; |
| at803x,vddio-1p8v; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| &fec2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec2>; |
| phy-mode = "rgmii-txid"; |
| phy-handle = <ðphy1>; |
| phy-supply = <®_fec2_supply>; |
| fsl,magic-packet; |
| fsl,rgmii_rxc_dly; |
| status = "okay"; |
| }; |
| |
| &flexcan1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| xceiver-supply = <®_can_stby>; |
| status = "okay"; |
| }; |
| |
| &flexcan2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| xceiver-supply = <®_can_stby>; |
| status = "okay"; |
| }; |
| |
| &flexcan3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan3>; |
| xceiver-supply = <®_can_stby>; |
| status = "okay"; |
| }; |
| |
| &flexspi0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexspi0>; |
| status = "okay"; |
| |
| flash0: mt35xu512aba@0 { |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "micron,mt35xu512aba"; |
| spi-max-frequency = <133000000>; |
| spi-nor,ddr-quad-read-dummy = <8>; |
| }; |
| }; |
| |
| &gpio0_mipi_csi0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_mipi_csi0_gpio>; |
| status = "okay"; |
| }; |
| |
| &gpio0_mipi_csi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_mipi_csi1_gpio>; |
| status = "okay"; |
| }; |
| |
| &i2c0_mipi_csi0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| clock-frequency = <100000>; |
| status = "okay"; |
| |
| max9286_mipi@6A { |
| compatible = "maxim,max9286_mipi"; |
| reg = <0x6A>; |
| clocks = <&clk IMX8QM_CLK_DUMMY>; |
| clock-names = "capture_mclk"; |
| mclk = <27000000>; |
| mclk_source = <0>; |
| pwn-gpios = <&gpio0_mipi_csi0 0 GPIO_ACTIVE_HIGH>; |
| virtual-channel; |
| port { |
| max9286_0_ep: endpoint { |
| remote-endpoint = <&mipi_csi0_ep>; |
| data-lanes = <1 2 3 4>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c0_mipi_csi1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| clock-frequency = <100000>; |
| status = "disabled"; |
| |
| max9286_mipi@6A { |
| compatible = "maxim,max9286_mipi"; |
| reg = <0x6A>; |
| clocks = <&clk IMX8QM_CLK_DUMMY>; |
| clock-names = "capture_mclk"; |
| mclk = <27000000>; |
| mclk_source = <0>; |
| pwn-gpios = <&gpio0_mipi_csi1 0 GPIO_ACTIVE_HIGH>; |
| virtual-channel; |
| port { |
| max9286_1_ep: endpoint { |
| remote-endpoint = <&mipi_csi1_ep>; |
| data-lanes = <1 2 3 4>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c0_hdmi { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hdmi_lpi2c0>; |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| |
| &i2c0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpi2c0>; |
| clock-frequency = <100000>; |
| status = "okay"; |
| |
| codec: cs42888@48 { |
| compatible = "cirrus,cs42888"; |
| reg = <0x48>; |
| clocks = <&clk IMX8QM_AUD_MCLKOUT0>; |
| clock-names = "mclk"; |
| VA-supply = <®_audio>; |
| VD-supply = <®_audio>; |
| VLS-supply = <®_audio>; |
| VLC-supply = <®_audio>; |
| reset-gpio = <&pca9557_a 2 1>; |
| power-domains = <&pd_mclk_out0>; |
| }; |
| }; |
| |
| &i2c1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpi2c1>; |
| status = "okay"; |
| |
| pca9557_a: gpio@18 { |
| compatible = "nxp,pca9557"; |
| reg = <0x18>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| pca9557_b: gpio@19 { |
| compatible = "nxp,pca9557"; |
| reg = <0x19>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| pca9557_c: gpio@1b { |
| compatible = "nxp,pca9557"; |
| reg = <0x1b>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| pca9557_d: gpio@1f { |
| compatible = "nxp,pca9557"; |
| reg = <0x1f>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| fxas2100x@20 { |
| compatible = "fsl,fxas2100x"; |
| reg = <0x20>; |
| }; |
| |
| fxos8700@1d { |
| compatible = "fsl,fxos8700"; |
| reg = <0x1d>; |
| }; |
| |
| isl29023@44 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_isl29023>; |
| compatible = "fsl,isl29023"; |
| reg = <0x44>; |
| rext = <499>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <20 2>; |
| }; |
| |
| mpl3115@60 { |
| compatible = "fsl,mpl3115"; |
| reg = <0x60>; |
| }; |
| }; |
| |
| &i2c2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpi2c2>; |
| status = "okay"; |
| |
| max7322: gpio@68 { |
| compatible = "maxim,max7322"; |
| reg = <0x68>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| }; |
| |
| &pd_dma_lpuart0 { |
| debug_console; |
| }; |
| |
| &lpuart0 { /* console */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpuart0>; |
| status = "okay"; |
| }; |
| |
| &lpuart1 { /* BT */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpuart1>; |
| resets = <&modem_reset>; |
| status = "okay"; |
| }; |
| |
| &lpuart3 { /* GPS */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpuart3>; |
| status = "okay"; |
| }; |
| |
| &mipi_csi_0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| virtual-channel; |
| status = "okay"; |
| |
| /* Camera 0 MIPI CSI-2 (CSIS0) */ |
| port@0 { |
| reg = <0>; |
| mipi_csi0_ep: endpoint { |
| remote-endpoint = <&max9286_0_ep>; |
| data-lanes = <1 2 3 4>; |
| }; |
| }; |
| }; |
| |
| &mipi_csi_1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| virtual-channel; |
| status = "disabled"; |
| |
| /* Camera 0 MIPI CSI-2 (CSIS1) */ |
| port@1 { |
| reg = <1>; |
| mipi_csi1_ep: endpoint { |
| remote-endpoint = <&max9286_1_ep>; |
| data-lanes = <1 2 3 4>; |
| }; |
| }; |
| }; |
| |
| &mlb { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_mlb>; |
| pinctrl-assert-gpios = <&pca9557_d 2 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &isi_0 { |
| status = "okay"; |
| }; |
| |
| &isi_1 { |
| status = "okay"; |
| }; |
| |
| &isi_2 { |
| status = "okay"; |
| }; |
| |
| &isi_3 { |
| status = "okay"; |
| }; |
| |
| &gpu_3d0 { |
| status = "okay"; |
| }; |
| |
| &gpu_3d1 { |
| status = "okay"; |
| }; |
| |
| &imx8_gpu_ss { |
| status = "okay"; |
| }; |
| |
| &pixel_combiner1 { |
| status = "okay"; |
| }; |
| |
| &prg1 { |
| status = "okay"; |
| }; |
| |
| &prg2 { |
| status = "okay"; |
| }; |
| |
| &prg3 { |
| status = "okay"; |
| }; |
| |
| &prg4 { |
| status = "okay"; |
| }; |
| |
| &prg5 { |
| status = "okay"; |
| }; |
| |
| &prg6 { |
| status = "okay"; |
| }; |
| |
| &prg7 { |
| status = "okay"; |
| }; |
| |
| &prg8 { |
| status = "okay"; |
| }; |
| |
| &prg9 { |
| status = "okay"; |
| }; |
| |
| &dpr1_channel1 { |
| status = "okay"; |
| }; |
| |
| &dpr1_channel2 { |
| status = "okay"; |
| }; |
| |
| &dpr1_channel3 { |
| status = "okay"; |
| }; |
| |
| &dpr2_channel1 { |
| status = "okay"; |
| }; |
| |
| &dpr2_channel2 { |
| status = "okay"; |
| }; |
| |
| &dpr2_channel3 { |
| status = "okay"; |
| }; |
| |
| &dpu1 { |
| status = "okay"; |
| }; |
| |
| &pixel_combiner2 { |
| status = "okay"; |
| }; |
| |
| &prg10 { |
| status = "okay"; |
| }; |
| |
| &prg11 { |
| status = "okay"; |
| }; |
| |
| &prg12 { |
| status = "okay"; |
| }; |
| |
| &prg13 { |
| status = "okay"; |
| }; |
| |
| &prg14 { |
| status = "okay"; |
| }; |
| |
| &prg15 { |
| status = "okay"; |
| }; |
| |
| &prg16 { |
| status = "okay"; |
| }; |
| |
| &prg17 { |
| status = "okay"; |
| }; |
| |
| &prg18 { |
| status = "okay"; |
| }; |
| |
| &dpr3_channel1 { |
| status = "okay"; |
| }; |
| |
| &dpr3_channel2 { |
| status = "okay"; |
| }; |
| |
| &dpr3_channel3 { |
| status = "okay"; |
| }; |
| |
| &dpr4_channel1 { |
| status = "okay"; |
| }; |
| |
| &dpr4_channel2 { |
| status = "okay"; |
| }; |
| |
| &dpr4_channel3 { |
| status = "okay"; |
| }; |
| |
| &dpu2 { |
| status = "okay"; |
| }; |
| |
| &pciea{ |
| ext_osc = <1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pciea>; |
| reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>; |
| clkreq-gpio = <&gpio4 27 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &pcieb{ |
| ext_osc = <1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcieb>; |
| reset-gpio = <&gpio5 0 GPIO_ACTIVE_LOW>; |
| clkreq-gpio = <&gpio4 1 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &intmux_cm40 { |
| status = "okay"; |
| }; |
| |
| &rpmsg{ |
| /* |
| * 64K for one rpmsg instance: |
| */ |
| vdev-nums = <1>; |
| reg = <0x0 0x90000000 0x0 0x10000>; |
| status = "okay"; |
| }; |
| |
| &intmux_cm41 { |
| status = "okay"; |
| }; |
| |
| &rpmsg1{ |
| /* |
| * 64K for one rpmsg instance: |
| */ |
| vdev-nums = <1>; |
| reg = <0x0 0x90100000 0x0 0x10000>; |
| status = "okay"; |
| }; |
| |
| &lvds0_pwm { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lvds0_pwm0>; |
| status = "okay"; |
| }; |
| |
| &lvds1_pwm { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lvds1_pwm0>; |
| status = "okay"; |
| }; |
| |
| &ldb1_phy { |
| status = "okay"; |
| }; |
| |
| &ldb1 { |
| status = "okay"; |
| |
| lvds-channel@0 { |
| fsl,data-mapping = "jeida"; |
| fsl,data-width = <24>; |
| status = "okay"; |
| |
| port@1 { |
| reg = <1>; |
| |
| lvds0_out: endpoint { |
| remote-endpoint = <&it6263_0_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c1_lvds0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lvds0_lpi2c1>; |
| clock-frequency = <100000>; |
| status = "okay"; |
| |
| lvds-to-hdmi-bridge@4c { |
| compatible = "ite,it6263"; |
| reg = <0x4c>; |
| |
| port { |
| it6263_0_in: endpoint { |
| clock-lanes = <3>; |
| data-lanes = <0 1 2 4>; |
| remote-endpoint = <&lvds0_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| &ldb2_phy { |
| status = "okay"; |
| }; |
| |
| &ldb2 { |
| status = "okay"; |
| |
| lvds-channel@0 { |
| fsl,data-mapping = "jeida"; |
| fsl,data-width = <24>; |
| status = "okay"; |
| |
| port@1 { |
| reg = <1>; |
| |
| lvds1_out: endpoint { |
| remote-endpoint = <&it6263_1_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c1_lvds1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lvds1_lpi2c1>; |
| clock-frequency = <100000>; |
| status = "okay"; |
| |
| lvds-to-hdmi-bridge@4c { |
| compatible = "ite,it6263"; |
| reg = <0x4c>; |
| |
| port { |
| it6263_1_in: endpoint { |
| clock-lanes = <3>; |
| data-lanes = <0 1 2 4>; |
| remote-endpoint = <&lvds1_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| &mipi_dsi_phy1 { |
| status = "okay"; |
| }; |
| |
| &mipi_dsi1 { |
| status = "okay"; |
| }; |
| |
| &mipi_dsi_bridge1 { |
| status = "okay"; |
| |
| port@1 { |
| mipi_dsi_bridge1_adv: endpoint { |
| remote-endpoint = <&adv7535_1_in>; |
| }; |
| }; |
| }; |
| |
| &i2c0_mipi_dsi0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_mipi0_lpi2c0>; |
| clock-frequency = <100000>; |
| status = "okay"; |
| |
| adv_bridge1: adv7535@3d { |
| compatible = "adi,adv7535", "adi,adv7533"; |
| reg = <0x3d>; |
| adi,dsi-lanes = <4>; |
| adi,dsi-channel = <1>; |
| status = "okay"; |
| |
| port { |
| adv7535_1_in: endpoint { |
| remote-endpoint = <&mipi_dsi_bridge1_adv>; |
| }; |
| }; |
| }; |
| }; |
| |
| &mipi_dsi_phy2 { |
| status = "okay"; |
| }; |
| |
| &mipi_dsi2 { |
| status = "okay"; |
| }; |
| |
| &mipi_dsi_bridge2 { |
| status = "okay"; |
| |
| port@1 { |
| mipi_dsi_bridge2_adv: endpoint { |
| remote-endpoint = <&adv7535_2_in>; |
| }; |
| }; |
| }; |
| |
| &i2c0_mipi_dsi1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_mipi1_lpi2c0>; |
| clock-frequency = <100000>; |
| status = "okay"; |
| |
| adv_bridge2: adv7535@3d { |
| compatible = "adi,adv7535", "adi,adv7533"; |
| reg = <0x3d>; |
| adi,dsi-lanes = <4>; |
| adi,dsi-channel = <1>; |
| status = "okay"; |
| |
| port { |
| adv7535_2_in: endpoint { |
| remote-endpoint = <&mipi_dsi_bridge2_adv>; |
| }; |
| }; |
| }; |
| }; |
