| /* | |
| * | |
| * AVM BlueFRITZ! USB driver | |
| * | |
| * Copyright (C) 2003-2006 Marcel Holtmann <marcel@holtmann.org> | |
| * | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| * | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/types.h> | |
| #include <linux/errno.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/device.h> | |
| #include <linux/firmware.h> | |
| #include <linux/usb.h> | |
| #include <net/bluetooth/bluetooth.h> | |
| #include <net/bluetooth/hci_core.h> | |
| #ifndef CONFIG_BT_HCIBFUSB_DEBUG | |
| #undef BT_DBG | |
| #define BT_DBG(D...) | |
| #endif | |
| #define VERSION "1.2" | |
| static struct usb_driver bfusb_driver; | |
| static struct usb_device_id bfusb_table[] = { | |
| /* AVM BlueFRITZ! USB */ | |
| { USB_DEVICE(0x057c, 0x2200) }, | |
| { } /* Terminating entry */ | |
| }; | |
| MODULE_DEVICE_TABLE(usb, bfusb_table); | |
| #define BFUSB_MAX_BLOCK_SIZE 256 | |
| #define BFUSB_BLOCK_TIMEOUT 3000 | |
| #define BFUSB_TX_PROCESS 1 | |
| #define BFUSB_TX_WAKEUP 2 | |
| #define BFUSB_MAX_BULK_TX 2 | |
| #define BFUSB_MAX_BULK_RX 2 | |
| struct bfusb_data { | |
| struct hci_dev *hdev; | |
| unsigned long state; | |
| struct usb_device *udev; | |
| unsigned int bulk_in_ep; | |
| unsigned int bulk_out_ep; | |
| unsigned int bulk_pkt_size; | |
| rwlock_t lock; | |
| struct sk_buff_head transmit_q; | |
| struct sk_buff *reassembly; | |
| atomic_t pending_tx; | |
| struct sk_buff_head pending_q; | |
| struct sk_buff_head completed_q; | |
| }; | |
| struct bfusb_data_scb { | |
| struct urb *urb; | |
| }; | |
| static void bfusb_tx_complete(struct urb *urb); | |
| static void bfusb_rx_complete(struct urb *urb); | |
| static struct urb *bfusb_get_completed(struct bfusb_data *data) | |
| { | |
| struct sk_buff *skb; | |
| struct urb *urb = NULL; | |
| BT_DBG("bfusb %p", data); | |
| skb = skb_dequeue(&data->completed_q); | |
| if (skb) { | |
| urb = ((struct bfusb_data_scb *) skb->cb)->urb; | |
| kfree_skb(skb); | |
| } | |
| return urb; | |
| } | |
| static void bfusb_unlink_urbs(struct bfusb_data *data) | |
| { | |
| struct sk_buff *skb; | |
| struct urb *urb; | |
| BT_DBG("bfusb %p", data); | |
| while ((skb = skb_dequeue(&data->pending_q))) { | |
| urb = ((struct bfusb_data_scb *) skb->cb)->urb; | |
| usb_kill_urb(urb); | |
| skb_queue_tail(&data->completed_q, skb); | |
| } | |
| while ((urb = bfusb_get_completed(data))) | |
| usb_free_urb(urb); | |
| } | |
| static int bfusb_send_bulk(struct bfusb_data *data, struct sk_buff *skb) | |
| { | |
| struct bfusb_data_scb *scb = (void *) skb->cb; | |
| struct urb *urb = bfusb_get_completed(data); | |
| int err, pipe; | |
| BT_DBG("bfusb %p skb %p len %d", data, skb, skb->len); | |
| if (!urb && !(urb = usb_alloc_urb(0, GFP_ATOMIC))) | |
| return -ENOMEM; | |
| pipe = usb_sndbulkpipe(data->udev, data->bulk_out_ep); | |
| usb_fill_bulk_urb(urb, data->udev, pipe, skb->data, skb->len, | |
| bfusb_tx_complete, skb); | |
| scb->urb = urb; | |
| skb_queue_tail(&data->pending_q, skb); | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (err) { | |
| BT_ERR("%s bulk tx submit failed urb %p err %d", | |
| data->hdev->name, urb, err); | |
| skb_unlink(skb, &data->pending_q); | |
| usb_free_urb(urb); | |
| } else | |
| atomic_inc(&data->pending_tx); | |
| return err; | |
| } | |
| static void bfusb_tx_wakeup(struct bfusb_data *data) | |
| { | |
| struct sk_buff *skb; | |
| BT_DBG("bfusb %p", data); | |
| if (test_and_set_bit(BFUSB_TX_PROCESS, &data->state)) { | |
| set_bit(BFUSB_TX_WAKEUP, &data->state); | |
| return; | |
| } | |
| do { | |
| clear_bit(BFUSB_TX_WAKEUP, &data->state); | |
| while ((atomic_read(&data->pending_tx) < BFUSB_MAX_BULK_TX) && | |
| (skb = skb_dequeue(&data->transmit_q))) { | |
| if (bfusb_send_bulk(data, skb) < 0) { | |
| skb_queue_head(&data->transmit_q, skb); | |
| break; | |
| } | |
| } | |
| } while (test_bit(BFUSB_TX_WAKEUP, &data->state)); | |
| clear_bit(BFUSB_TX_PROCESS, &data->state); | |
| } | |
| static void bfusb_tx_complete(struct urb *urb) | |
| { | |
| struct sk_buff *skb = (struct sk_buff *) urb->context; | |
| struct bfusb_data *data = (struct bfusb_data *) skb->dev; | |
| BT_DBG("bfusb %p urb %p skb %p len %d", data, urb, skb, skb->len); | |
| atomic_dec(&data->pending_tx); | |
| if (!test_bit(HCI_RUNNING, &data->hdev->flags)) | |
| return; | |
| if (!urb->status) | |
| data->hdev->stat.byte_tx += skb->len; | |
| else | |
| data->hdev->stat.err_tx++; | |
| read_lock(&data->lock); | |
| skb_unlink(skb, &data->pending_q); | |
| skb_queue_tail(&data->completed_q, skb); | |
| bfusb_tx_wakeup(data); | |
| read_unlock(&data->lock); | |
| } | |
| static int bfusb_rx_submit(struct bfusb_data *data, struct urb *urb) | |
| { | |
| struct bfusb_data_scb *scb; | |
| struct sk_buff *skb; | |
| int err, pipe, size = HCI_MAX_FRAME_SIZE + 32; | |
| BT_DBG("bfusb %p urb %p", bfusb, urb); | |
| if (!urb && !(urb = usb_alloc_urb(0, GFP_ATOMIC))) | |
| return -ENOMEM; | |
| skb = bt_skb_alloc(size, GFP_ATOMIC); | |
| if (!skb) { | |
| usb_free_urb(urb); | |
| return -ENOMEM; | |
| } | |
| skb->dev = (void *) data; | |
| scb = (struct bfusb_data_scb *) skb->cb; | |
| scb->urb = urb; | |
| pipe = usb_rcvbulkpipe(data->udev, data->bulk_in_ep); | |
| usb_fill_bulk_urb(urb, data->udev, pipe, skb->data, size, | |
| bfusb_rx_complete, skb); | |
| skb_queue_tail(&data->pending_q, skb); | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (err) { | |
| BT_ERR("%s bulk rx submit failed urb %p err %d", | |
| data->hdev->name, urb, err); | |
| skb_unlink(skb, &data->pending_q); | |
| kfree_skb(skb); | |
| usb_free_urb(urb); | |
| } | |
| return err; | |
| } | |
| static inline int bfusb_recv_block(struct bfusb_data *data, int hdr, unsigned char *buf, int len) | |
| { | |
| BT_DBG("bfusb %p hdr 0x%02x data %p len %d", data, hdr, buf, len); | |
| if (hdr & 0x10) { | |
| BT_ERR("%s error in block", data->hdev->name); | |
| if (data->reassembly) | |
| kfree_skb(data->reassembly); | |
| data->reassembly = NULL; | |
| return -EIO; | |
| } | |
| if (hdr & 0x04) { | |
| struct sk_buff *skb; | |
| unsigned char pkt_type; | |
| int pkt_len = 0; | |
| if (data->reassembly) { | |
| BT_ERR("%s unexpected start block", data->hdev->name); | |
| kfree_skb(data->reassembly); | |
| data->reassembly = NULL; | |
| } | |
| if (len < 1) { | |
| BT_ERR("%s no packet type found", data->hdev->name); | |
| return -EPROTO; | |
| } | |
| pkt_type = *buf++; len--; | |
| switch (pkt_type) { | |
| case HCI_EVENT_PKT: | |
| if (len >= HCI_EVENT_HDR_SIZE) { | |
| struct hci_event_hdr *hdr = (struct hci_event_hdr *) buf; | |
| pkt_len = HCI_EVENT_HDR_SIZE + hdr->plen; | |
| } else { | |
| BT_ERR("%s event block is too short", data->hdev->name); | |
| return -EILSEQ; | |
| } | |
| break; | |
| case HCI_ACLDATA_PKT: | |
| if (len >= HCI_ACL_HDR_SIZE) { | |
| struct hci_acl_hdr *hdr = (struct hci_acl_hdr *) buf; | |
| pkt_len = HCI_ACL_HDR_SIZE + __le16_to_cpu(hdr->dlen); | |
| } else { | |
| BT_ERR("%s data block is too short", data->hdev->name); | |
| return -EILSEQ; | |
| } | |
| break; | |
| case HCI_SCODATA_PKT: | |
| if (len >= HCI_SCO_HDR_SIZE) { | |
| struct hci_sco_hdr *hdr = (struct hci_sco_hdr *) buf; | |
| pkt_len = HCI_SCO_HDR_SIZE + hdr->dlen; | |
| } else { | |
| BT_ERR("%s audio block is too short", data->hdev->name); | |
| return -EILSEQ; | |
| } | |
| break; | |
| } | |
| skb = bt_skb_alloc(pkt_len, GFP_ATOMIC); | |
| if (!skb) { | |
| BT_ERR("%s no memory for the packet", data->hdev->name); | |
| return -ENOMEM; | |
| } | |
| skb->dev = (void *) data->hdev; | |
| bt_cb(skb)->pkt_type = pkt_type; | |
| data->reassembly = skb; | |
| } else { | |
| if (!data->reassembly) { | |
| BT_ERR("%s unexpected continuation block", data->hdev->name); | |
| return -EIO; | |
| } | |
| } | |
| if (len > 0) | |
| memcpy(skb_put(data->reassembly, len), buf, len); | |
| if (hdr & 0x08) { | |
| hci_recv_frame(data->reassembly); | |
| data->reassembly = NULL; | |
| } | |
| return 0; | |
| } | |
| static void bfusb_rx_complete(struct urb *urb) | |
| { | |
| struct sk_buff *skb = (struct sk_buff *) urb->context; | |
| struct bfusb_data *data = (struct bfusb_data *) skb->dev; | |
| unsigned char *buf = urb->transfer_buffer; | |
| int count = urb->actual_length; | |
| int err, hdr, len; | |
| BT_DBG("bfusb %p urb %p skb %p len %d", bfusb, urb, skb, skb->len); | |
| read_lock(&data->lock); | |
| if (!test_bit(HCI_RUNNING, &data->hdev->flags)) | |
| goto unlock; | |
| if (urb->status || !count) | |
| goto resubmit; | |
| data->hdev->stat.byte_rx += count; | |
| skb_put(skb, count); | |
| while (count) { | |
| hdr = buf[0] | (buf[1] << 8); | |
| if (hdr & 0x4000) { | |
| len = 0; | |
| count -= 2; | |
| buf += 2; | |
| } else { | |
| len = (buf[2] == 0) ? 256 : buf[2]; | |
| count -= 3; | |
| buf += 3; | |
| } | |
| if (count < len) { | |
| BT_ERR("%s block extends over URB buffer ranges", | |
| data->hdev->name); | |
| } | |
| if ((hdr & 0xe1) == 0xc1) | |
| bfusb_recv_block(data, hdr, buf, len); | |
| count -= len; | |
| buf += len; | |
| } | |
| skb_unlink(skb, &data->pending_q); | |
| kfree_skb(skb); | |
| bfusb_rx_submit(data, urb); | |
| read_unlock(&data->lock); | |
| return; | |
| resubmit: | |
| urb->dev = data->udev; | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (err) { | |
| BT_ERR("%s bulk resubmit failed urb %p err %d", | |
| data->hdev->name, urb, err); | |
| } | |
| unlock: | |
| read_unlock(&data->lock); | |
| } | |
| static int bfusb_open(struct hci_dev *hdev) | |
| { | |
| struct bfusb_data *data = hdev->driver_data; | |
| unsigned long flags; | |
| int i, err; | |
| BT_DBG("hdev %p bfusb %p", hdev, data); | |
| if (test_and_set_bit(HCI_RUNNING, &hdev->flags)) | |
| return 0; | |
| write_lock_irqsave(&data->lock, flags); | |
| err = bfusb_rx_submit(data, NULL); | |
| if (!err) { | |
| for (i = 1; i < BFUSB_MAX_BULK_RX; i++) | |
| bfusb_rx_submit(data, NULL); | |
| } else { | |
| clear_bit(HCI_RUNNING, &hdev->flags); | |
| } | |
| write_unlock_irqrestore(&data->lock, flags); | |
| return err; | |
| } | |
| static int bfusb_flush(struct hci_dev *hdev) | |
| { | |
| struct bfusb_data *data = hdev->driver_data; | |
| BT_DBG("hdev %p bfusb %p", hdev, data); | |
| skb_queue_purge(&data->transmit_q); | |
| return 0; | |
| } | |
| static int bfusb_close(struct hci_dev *hdev) | |
| { | |
| struct bfusb_data *data = hdev->driver_data; | |
| unsigned long flags; | |
| BT_DBG("hdev %p bfusb %p", hdev, data); | |
| if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) | |
| return 0; | |
| write_lock_irqsave(&data->lock, flags); | |
| write_unlock_irqrestore(&data->lock, flags); | |
| bfusb_unlink_urbs(data); | |
| bfusb_flush(hdev); | |
| return 0; | |
| } | |
| static int bfusb_send_frame(struct sk_buff *skb) | |
| { | |
| struct hci_dev *hdev = (struct hci_dev *) skb->dev; | |
| struct bfusb_data *data; | |
| struct sk_buff *nskb; | |
| unsigned char buf[3]; | |
| int sent = 0, size, count; | |
| BT_DBG("hdev %p skb %p type %d len %d", hdev, skb, bt_cb(skb)->pkt_type, skb->len); | |
| if (!hdev) { | |
| BT_ERR("Frame for unknown HCI device (hdev=NULL)"); | |
| return -ENODEV; | |
| } | |
| if (!test_bit(HCI_RUNNING, &hdev->flags)) | |
| return -EBUSY; | |
| data = hdev->driver_data; | |
| switch (bt_cb(skb)->pkt_type) { | |
| case HCI_COMMAND_PKT: | |
| hdev->stat.cmd_tx++; | |
| break; | |
| case HCI_ACLDATA_PKT: | |
| hdev->stat.acl_tx++; | |
| break; | |
| case HCI_SCODATA_PKT: | |
| hdev->stat.sco_tx++; | |
| break; | |
| }; | |
| /* Prepend skb with frame type */ | |
| memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); | |
| count = skb->len; | |
| /* Max HCI frame size seems to be 1511 + 1 */ | |
| nskb = bt_skb_alloc(count + 32, GFP_ATOMIC); | |
| if (!nskb) { | |
| BT_ERR("Can't allocate memory for new packet"); | |
| return -ENOMEM; | |
| } | |
| nskb->dev = (void *) data; | |
| while (count) { | |
| size = min_t(uint, count, BFUSB_MAX_BLOCK_SIZE); | |
| buf[0] = 0xc1 | ((sent == 0) ? 0x04 : 0) | ((count == size) ? 0x08 : 0); | |
| buf[1] = 0x00; | |
| buf[2] = (size == BFUSB_MAX_BLOCK_SIZE) ? 0 : size; | |
| memcpy(skb_put(nskb, 3), buf, 3); | |
| skb_copy_from_linear_data_offset(skb, sent, skb_put(nskb, size), size); | |
| sent += size; | |
| count -= size; | |
| } | |
| /* Don't send frame with multiple size of bulk max packet */ | |
| if ((nskb->len % data->bulk_pkt_size) == 0) { | |
| buf[0] = 0xdd; | |
| buf[1] = 0x00; | |
| memcpy(skb_put(nskb, 2), buf, 2); | |
| } | |
| read_lock(&data->lock); | |
| skb_queue_tail(&data->transmit_q, nskb); | |
| bfusb_tx_wakeup(data); | |
| read_unlock(&data->lock); | |
| kfree_skb(skb); | |
| return 0; | |
| } | |
| static void bfusb_destruct(struct hci_dev *hdev) | |
| { | |
| struct bfusb_data *data = hdev->driver_data; | |
| BT_DBG("hdev %p bfusb %p", hdev, data); | |
| kfree(data); | |
| } | |
| static int bfusb_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg) | |
| { | |
| return -ENOIOCTLCMD; | |
| } | |
| static int bfusb_load_firmware(struct bfusb_data *data, | |
| const unsigned char *firmware, int count) | |
| { | |
| unsigned char *buf; | |
| int err, pipe, len, size, sent = 0; | |
| BT_DBG("bfusb %p udev %p", data, data->udev); | |
| BT_INFO("BlueFRITZ! USB loading firmware"); | |
| pipe = usb_sndctrlpipe(data->udev, 0); | |
| if (usb_control_msg(data->udev, pipe, USB_REQ_SET_CONFIGURATION, | |
| 0, 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT) < 0) { | |
| BT_ERR("Can't change to loading configuration"); | |
| return -EBUSY; | |
| } | |
| data->udev->toggle[0] = data->udev->toggle[1] = 0; | |
| buf = kmalloc(BFUSB_MAX_BLOCK_SIZE + 3, GFP_ATOMIC); | |
| if (!buf) { | |
| BT_ERR("Can't allocate memory chunk for firmware"); | |
| return -ENOMEM; | |
| } | |
| pipe = usb_sndbulkpipe(data->udev, data->bulk_out_ep); | |
| while (count) { | |
| size = min_t(uint, count, BFUSB_MAX_BLOCK_SIZE + 3); | |
| memcpy(buf, firmware + sent, size); | |
| err = usb_bulk_msg(data->udev, pipe, buf, size, | |
| &len, BFUSB_BLOCK_TIMEOUT); | |
| if (err || (len != size)) { | |
| BT_ERR("Error in firmware loading"); | |
| goto error; | |
| } | |
| sent += size; | |
| count -= size; | |
| } | |
| err = usb_bulk_msg(data->udev, pipe, NULL, 0, | |
| &len, BFUSB_BLOCK_TIMEOUT); | |
| if (err < 0) { | |
| BT_ERR("Error in null packet request"); | |
| goto error; | |
| } | |
| pipe = usb_sndctrlpipe(data->udev, 0); | |
| err = usb_control_msg(data->udev, pipe, USB_REQ_SET_CONFIGURATION, | |
| 0, 2, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); | |
| if (err < 0) { | |
| BT_ERR("Can't change to running configuration"); | |
| goto error; | |
| } | |
| data->udev->toggle[0] = data->udev->toggle[1] = 0; | |
| BT_INFO("BlueFRITZ! USB device ready"); | |
| kfree(buf); | |
| return 0; | |
| error: | |
| kfree(buf); | |
| pipe = usb_sndctrlpipe(data->udev, 0); | |
| usb_control_msg(data->udev, pipe, USB_REQ_SET_CONFIGURATION, | |
| 0, 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); | |
| return err; | |
| } | |
| static int bfusb_probe(struct usb_interface *intf, const struct usb_device_id *id) | |
| { | |
| const struct firmware *firmware; | |
| struct usb_device *udev = interface_to_usbdev(intf); | |
| struct usb_host_endpoint *bulk_out_ep; | |
| struct usb_host_endpoint *bulk_in_ep; | |
| struct hci_dev *hdev; | |
| struct bfusb_data *data; | |
| BT_DBG("intf %p id %p", intf, id); | |
| /* Check number of endpoints */ | |
| if (intf->cur_altsetting->desc.bNumEndpoints < 2) | |
| return -EIO; | |
| bulk_out_ep = &intf->cur_altsetting->endpoint[0]; | |
| bulk_in_ep = &intf->cur_altsetting->endpoint[1]; | |
| if (!bulk_out_ep || !bulk_in_ep) { | |
| BT_ERR("Bulk endpoints not found"); | |
| goto done; | |
| } | |
| /* Initialize control structure and load firmware */ | |
| data = kzalloc(sizeof(struct bfusb_data), GFP_KERNEL); | |
| if (!data) { | |
| BT_ERR("Can't allocate memory for control structure"); | |
| goto done; | |
| } | |
| data->udev = udev; | |
| data->bulk_in_ep = bulk_in_ep->desc.bEndpointAddress; | |
| data->bulk_out_ep = bulk_out_ep->desc.bEndpointAddress; | |
| data->bulk_pkt_size = le16_to_cpu(bulk_out_ep->desc.wMaxPacketSize); | |
| rwlock_init(&data->lock); | |
| data->reassembly = NULL; | |
| skb_queue_head_init(&data->transmit_q); | |
| skb_queue_head_init(&data->pending_q); | |
| skb_queue_head_init(&data->completed_q); | |
| if (request_firmware(&firmware, "bfubase.frm", &udev->dev) < 0) { | |
| BT_ERR("Firmware request failed"); | |
| goto error; | |
| } | |
| BT_DBG("firmware data %p size %d", firmware->data, firmware->size); | |
| if (bfusb_load_firmware(data, firmware->data, firmware->size) < 0) { | |
| BT_ERR("Firmware loading failed"); | |
| goto release; | |
| } | |
| release_firmware(firmware); | |
| /* Initialize and register HCI device */ | |
| hdev = hci_alloc_dev(); | |
| if (!hdev) { | |
| BT_ERR("Can't allocate HCI device"); | |
| goto error; | |
| } | |
| data->hdev = hdev; | |
| hdev->type = HCI_USB; | |
| hdev->driver_data = data; | |
| SET_HCIDEV_DEV(hdev, &intf->dev); | |
| hdev->open = bfusb_open; | |
| hdev->close = bfusb_close; | |
| hdev->flush = bfusb_flush; | |
| hdev->send = bfusb_send_frame; | |
| hdev->destruct = bfusb_destruct; | |
| hdev->ioctl = bfusb_ioctl; | |
| hdev->owner = THIS_MODULE; | |
| if (hci_register_dev(hdev) < 0) { | |
| BT_ERR("Can't register HCI device"); | |
| hci_free_dev(hdev); | |
| goto error; | |
| } | |
| usb_set_intfdata(intf, data); | |
| return 0; | |
| release: | |
| release_firmware(firmware); | |
| error: | |
| kfree(data); | |
| done: | |
| return -EIO; | |
| } | |
| static void bfusb_disconnect(struct usb_interface *intf) | |
| { | |
| struct bfusb_data *data = usb_get_intfdata(intf); | |
| struct hci_dev *hdev = data->hdev; | |
| BT_DBG("intf %p", intf); | |
| if (!hdev) | |
| return; | |
| usb_set_intfdata(intf, NULL); | |
| bfusb_close(hdev); | |
| if (hci_unregister_dev(hdev) < 0) | |
| BT_ERR("Can't unregister HCI device %s", hdev->name); | |
| hci_free_dev(hdev); | |
| } | |
| static struct usb_driver bfusb_driver = { | |
| .name = "bfusb", | |
| .probe = bfusb_probe, | |
| .disconnect = bfusb_disconnect, | |
| .id_table = bfusb_table, | |
| }; | |
| static int __init bfusb_init(void) | |
| { | |
| int err; | |
| BT_INFO("BlueFRITZ! USB driver ver %s", VERSION); | |
| err = usb_register(&bfusb_driver); | |
| if (err < 0) | |
| BT_ERR("Failed to register BlueFRITZ! USB driver"); | |
| return err; | |
| } | |
| static void __exit bfusb_exit(void) | |
| { | |
| usb_deregister(&bfusb_driver); | |
| } | |
| module_init(bfusb_init); | |
| module_exit(bfusb_exit); | |
| MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); | |
| MODULE_DESCRIPTION("BlueFRITZ! USB driver ver " VERSION); | |
| MODULE_VERSION(VERSION); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_FIRMWARE("bfubase.frm"); |