| /* | |
| * Multimedia device API | |
| * | |
| * Copyright (C) 2010 Nokia Corporation | |
| * | |
| * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> | |
| * Sakari Ailus <sakari.ailus@iki.fi> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #ifndef __LINUX_MEDIA_H | |
| #define __LINUX_MEDIA_H | |
| #ifndef __KERNEL__ | |
| #include <stdint.h> | |
| #endif | |
| #include <linux/ioctl.h> | |
| #include <linux/types.h> | |
| #include <linux/version.h> | |
| #define MEDIA_API_VERSION KERNEL_VERSION(0, 1, 0) | |
| struct media_device_info { | |
| char driver[16]; | |
| char model[32]; | |
| char serial[40]; | |
| char bus_info[32]; | |
| __u32 media_version; | |
| __u32 hw_revision; | |
| __u32 driver_version; | |
| __u32 reserved[31]; | |
| }; | |
| #define MEDIA_ENT_ID_FLAG_NEXT (1 << 31) | |
| /* | |
| * Initial value to be used when a new entity is created | |
| * Drivers should change it to something useful | |
| */ | |
| #define MEDIA_ENT_F_UNKNOWN 0x00000000 | |
| /* | |
| * Base number ranges for entity functions | |
| * | |
| * NOTE: those ranges and entity function number are phased just to | |
| * make it easier to maintain this file. Userspace should not rely on | |
| * the ranges to identify a group of function types, as newer | |
| * functions can be added with any name within the full u32 range. | |
| */ | |
| #define MEDIA_ENT_F_BASE 0x00000000 | |
| #define MEDIA_ENT_F_OLD_BASE 0x00010000 | |
| #define MEDIA_ENT_F_OLD_SUBDEV_BASE 0x00020000 | |
| /* | |
| * DVB entities | |
| */ | |
| #define MEDIA_ENT_F_DTV_DEMOD (MEDIA_ENT_F_BASE + 0x00001) | |
| #define MEDIA_ENT_F_TS_DEMUX (MEDIA_ENT_F_BASE + 0x00002) | |
| #define MEDIA_ENT_F_DTV_CA (MEDIA_ENT_F_BASE + 0x00003) | |
| #define MEDIA_ENT_F_DTV_NET_DECAP (MEDIA_ENT_F_BASE + 0x00004) | |
| /* | |
| * I/O entities | |
| */ | |
| #define MEDIA_ENT_F_IO_DTV (MEDIA_ENT_F_BASE + 0x01001) | |
| #define MEDIA_ENT_F_IO_VBI (MEDIA_ENT_F_BASE + 0x01002) | |
| #define MEDIA_ENT_F_IO_SWRADIO (MEDIA_ENT_F_BASE + 0x01003) | |
| /* | |
| * Analog TV IF-PLL decoders | |
| * | |
| * It is a responsibility of the master/bridge drivers to create links | |
| * for MEDIA_ENT_F_IF_VID_DECODER and MEDIA_ENT_F_IF_AUD_DECODER. | |
| */ | |
| #define MEDIA_ENT_F_IF_VID_DECODER (MEDIA_ENT_F_BASE + 0x02001) | |
| #define MEDIA_ENT_F_IF_AUD_DECODER (MEDIA_ENT_F_BASE + 0x02002) | |
| /* | |
| * Audio Entity Functions | |
| */ | |
| #define MEDIA_ENT_F_AUDIO_CAPTURE (MEDIA_ENT_F_BASE + 0x03001) | |
| #define MEDIA_ENT_F_AUDIO_PLAYBACK (MEDIA_ENT_F_BASE + 0x03002) | |
| #define MEDIA_ENT_F_AUDIO_MIXER (MEDIA_ENT_F_BASE + 0x03003) | |
| /* | |
| * Processing entities | |
| */ | |
| #define MEDIA_ENT_F_PROC_VIDEO_COMPOSER (MEDIA_ENT_F_BASE + 0x4001) | |
| #define MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER (MEDIA_ENT_F_BASE + 0x4002) | |
| #define MEDIA_ENT_F_PROC_VIDEO_PIXEL_ENC_CONV (MEDIA_ENT_F_BASE + 0x4003) | |
| #define MEDIA_ENT_F_PROC_VIDEO_LUT (MEDIA_ENT_F_BASE + 0x4004) | |
| #define MEDIA_ENT_F_PROC_VIDEO_SCALER (MEDIA_ENT_F_BASE + 0x4005) | |
| #define MEDIA_ENT_F_PROC_VIDEO_STATISTICS (MEDIA_ENT_F_BASE + 0x4006) | |
| /* | |
| * Connectors | |
| */ | |
| /* It is a responsibility of the entity drivers to add connectors and links */ | |
| #ifdef __KERNEL__ | |
| /* | |
| * For now, it should not be used in userspace, as some | |
| * definitions may change | |
| */ | |
| #define MEDIA_ENT_F_CONN_RF (MEDIA_ENT_F_BASE + 0x30001) | |
| #define MEDIA_ENT_F_CONN_SVIDEO (MEDIA_ENT_F_BASE + 0x30002) | |
| #define MEDIA_ENT_F_CONN_COMPOSITE (MEDIA_ENT_F_BASE + 0x30003) | |
| #endif | |
| /* | |
| * Don't touch on those. The ranges MEDIA_ENT_F_OLD_BASE and | |
| * MEDIA_ENT_F_OLD_SUBDEV_BASE are kept to keep backward compatibility | |
| * with the legacy v1 API.The number range is out of range by purpose: | |
| * several previously reserved numbers got excluded from this range. | |
| * | |
| * Subdevs are initialized with MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN, | |
| * in order to preserve backward compatibility. | |
| * Drivers must change to the proper subdev type before | |
| * registering the entity. | |
| */ | |
| #define MEDIA_ENT_F_IO_V4L (MEDIA_ENT_F_OLD_BASE + 1) | |
| #define MEDIA_ENT_F_CAM_SENSOR (MEDIA_ENT_F_OLD_SUBDEV_BASE + 1) | |
| #define MEDIA_ENT_F_FLASH (MEDIA_ENT_F_OLD_SUBDEV_BASE + 2) | |
| #define MEDIA_ENT_F_LENS (MEDIA_ENT_F_OLD_SUBDEV_BASE + 3) | |
| #define MEDIA_ENT_F_ATV_DECODER (MEDIA_ENT_F_OLD_SUBDEV_BASE + 4) | |
| /* | |
| * It is a responsibility of the master/bridge drivers to add connectors | |
| * and links for MEDIA_ENT_F_TUNER. Please notice that some old tuners | |
| * may require the usage of separate I2C chips to decode analog TV signals, | |
| * when the master/bridge chipset doesn't have its own TV standard decoder. | |
| * On such cases, the IF-PLL staging is mapped via one or two entities: | |
| * MEDIA_ENT_F_IF_VID_DECODER and/or MEDIA_ENT_F_IF_AUD_DECODER. | |
| */ | |
| #define MEDIA_ENT_F_TUNER (MEDIA_ENT_F_OLD_SUBDEV_BASE + 5) | |
| #define MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN MEDIA_ENT_F_OLD_SUBDEV_BASE | |
| #if !defined(__KERNEL__) || defined(__NEED_MEDIA_LEGACY_API) | |
| /* | |
| * Legacy symbols used to avoid userspace compilation breakages | |
| * | |
| * Those symbols map the entity function into types and should be | |
| * used only on legacy programs for legacy hardware. Don't rely | |
| * on those for MEDIA_IOC_G_TOPOLOGY. | |
| */ | |
| #define MEDIA_ENT_TYPE_SHIFT 16 | |
| #define MEDIA_ENT_TYPE_MASK 0x00ff0000 | |
| #define MEDIA_ENT_SUBTYPE_MASK 0x0000ffff | |
| /* End of the old subdev reserved numberspace */ | |
| #define MEDIA_ENT_T_DEVNODE_UNKNOWN (MEDIA_ENT_T_DEVNODE | \ | |
| MEDIA_ENT_SUBTYPE_MASK) | |
| #define MEDIA_ENT_T_DEVNODE MEDIA_ENT_F_OLD_BASE | |
| #define MEDIA_ENT_T_DEVNODE_V4L MEDIA_ENT_F_IO_V4L | |
| #define MEDIA_ENT_T_DEVNODE_FB (MEDIA_ENT_T_DEVNODE + 2) | |
| #define MEDIA_ENT_T_DEVNODE_ALSA (MEDIA_ENT_T_DEVNODE + 3) | |
| #define MEDIA_ENT_T_DEVNODE_DVB (MEDIA_ENT_T_DEVNODE + 4) | |
| #define MEDIA_ENT_T_UNKNOWN MEDIA_ENT_F_UNKNOWN | |
| #define MEDIA_ENT_T_V4L2_VIDEO MEDIA_ENT_F_IO_V4L | |
| #define MEDIA_ENT_T_V4L2_SUBDEV MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN | |
| #define MEDIA_ENT_T_V4L2_SUBDEV_SENSOR MEDIA_ENT_F_CAM_SENSOR | |
| #define MEDIA_ENT_T_V4L2_SUBDEV_FLASH MEDIA_ENT_F_FLASH | |
| #define MEDIA_ENT_T_V4L2_SUBDEV_LENS MEDIA_ENT_F_LENS | |
| #define MEDIA_ENT_T_V4L2_SUBDEV_DECODER MEDIA_ENT_F_ATV_DECODER | |
| #define MEDIA_ENT_T_V4L2_SUBDEV_TUNER MEDIA_ENT_F_TUNER | |
| #endif | |
| /* Entity flags */ | |
| #define MEDIA_ENT_FL_DEFAULT (1 << 0) | |
| #define MEDIA_ENT_FL_CONNECTOR (1 << 1) | |
| struct media_entity_desc { | |
| __u32 id; | |
| char name[32]; | |
| __u32 type; | |
| __u32 revision; | |
| __u32 flags; | |
| __u32 group_id; | |
| __u16 pads; | |
| __u16 links; | |
| __u32 reserved[4]; | |
| union { | |
| /* Node specifications */ | |
| struct { | |
| __u32 major; | |
| __u32 minor; | |
| } dev; | |
| #if 1 | |
| /* | |
| * TODO: this shouldn't have been added without | |
| * actual drivers that use this. When the first real driver | |
| * appears that sets this information, special attention | |
| * should be given whether this information is 1) enough, and | |
| * 2) can deal with udev rules that rename devices. The struct | |
| * dev would not be sufficient for this since that does not | |
| * contain the subdevice information. In addition, struct dev | |
| * can only refer to a single device, and not to multiple (e.g. | |
| * pcm and mixer devices). | |
| * | |
| * So for now mark this as a to do. | |
| */ | |
| struct { | |
| __u32 card; | |
| __u32 device; | |
| __u32 subdevice; | |
| } alsa; | |
| #endif | |
| #if 1 | |
| /* | |
| * DEPRECATED: previous node specifications. Kept just to | |
| * avoid breaking compilation, but media_entity_desc.dev | |
| * should be used instead. In particular, alsa and dvb | |
| * fields below are wrong: for all devnodes, there should | |
| * be just major/minor inside the struct, as this is enough | |
| * to represent any devnode, no matter what type. | |
| */ | |
| struct { | |
| __u32 major; | |
| __u32 minor; | |
| } v4l; | |
| struct { | |
| __u32 major; | |
| __u32 minor; | |
| } fb; | |
| int dvb; | |
| #endif | |
| /* Sub-device specifications */ | |
| /* Nothing needed yet */ | |
| __u8 raw[184]; | |
| }; | |
| }; | |
| #define MEDIA_PAD_FL_SINK (1 << 0) | |
| #define MEDIA_PAD_FL_SOURCE (1 << 1) | |
| #define MEDIA_PAD_FL_MUST_CONNECT (1 << 2) | |
| struct media_pad_desc { | |
| __u32 entity; /* entity ID */ | |
| __u16 index; /* pad index */ | |
| __u32 flags; /* pad flags */ | |
| __u32 reserved[2]; | |
| }; | |
| #define MEDIA_LNK_FL_ENABLED (1 << 0) | |
| #define MEDIA_LNK_FL_IMMUTABLE (1 << 1) | |
| #define MEDIA_LNK_FL_DYNAMIC (1 << 2) | |
| #define MEDIA_LNK_FL_LINK_TYPE (0xf << 28) | |
| # define MEDIA_LNK_FL_DATA_LINK (0 << 28) | |
| # define MEDIA_LNK_FL_INTERFACE_LINK (1 << 28) | |
| struct media_link_desc { | |
| struct media_pad_desc source; | |
| struct media_pad_desc sink; | |
| __u32 flags; | |
| __u32 reserved[2]; | |
| }; | |
| struct media_links_enum { | |
| __u32 entity; | |
| /* Should have enough room for pads elements */ | |
| struct media_pad_desc __user *pads; | |
| /* Should have enough room for links elements */ | |
| struct media_link_desc __user *links; | |
| __u32 reserved[4]; | |
| }; | |
| /* Interface type ranges */ | |
| #define MEDIA_INTF_T_DVB_BASE 0x00000100 | |
| #define MEDIA_INTF_T_V4L_BASE 0x00000200 | |
| #define MEDIA_INTF_T_ALSA_BASE 0x00000300 | |
| /* Interface types */ | |
| #define MEDIA_INTF_T_DVB_FE (MEDIA_INTF_T_DVB_BASE) | |
| #define MEDIA_INTF_T_DVB_DEMUX (MEDIA_INTF_T_DVB_BASE + 1) | |
| #define MEDIA_INTF_T_DVB_DVR (MEDIA_INTF_T_DVB_BASE + 2) | |
| #define MEDIA_INTF_T_DVB_CA (MEDIA_INTF_T_DVB_BASE + 3) | |
| #define MEDIA_INTF_T_DVB_NET (MEDIA_INTF_T_DVB_BASE + 4) | |
| #define MEDIA_INTF_T_V4L_VIDEO (MEDIA_INTF_T_V4L_BASE) | |
| #define MEDIA_INTF_T_V4L_VBI (MEDIA_INTF_T_V4L_BASE + 1) | |
| #define MEDIA_INTF_T_V4L_RADIO (MEDIA_INTF_T_V4L_BASE + 2) | |
| #define MEDIA_INTF_T_V4L_SUBDEV (MEDIA_INTF_T_V4L_BASE + 3) | |
| #define MEDIA_INTF_T_V4L_SWRADIO (MEDIA_INTF_T_V4L_BASE + 4) | |
| #define MEDIA_INTF_T_V4L_TOUCH (MEDIA_INTF_T_V4L_BASE + 5) | |
| #define MEDIA_INTF_T_ALSA_PCM_CAPTURE (MEDIA_INTF_T_ALSA_BASE) | |
| #define MEDIA_INTF_T_ALSA_PCM_PLAYBACK (MEDIA_INTF_T_ALSA_BASE + 1) | |
| #define MEDIA_INTF_T_ALSA_CONTROL (MEDIA_INTF_T_ALSA_BASE + 2) | |
| #define MEDIA_INTF_T_ALSA_COMPRESS (MEDIA_INTF_T_ALSA_BASE + 3) | |
| #define MEDIA_INTF_T_ALSA_RAWMIDI (MEDIA_INTF_T_ALSA_BASE + 4) | |
| #define MEDIA_INTF_T_ALSA_HWDEP (MEDIA_INTF_T_ALSA_BASE + 5) | |
| #define MEDIA_INTF_T_ALSA_SEQUENCER (MEDIA_INTF_T_ALSA_BASE + 6) | |
| #define MEDIA_INTF_T_ALSA_TIMER (MEDIA_INTF_T_ALSA_BASE + 7) | |
| /* | |
| * MC next gen API definitions | |
| * | |
| * NOTE: The declarations below are close to the MC RFC for the Media | |
| * Controller, the next generation. Yet, there are a few adjustments | |
| * to do, as we want to be able to have a functional API before | |
| * the MC properties change. Those will be properly marked below. | |
| * Please also notice that I removed "num_pads", "num_links", | |
| * from the proposal, as a proper userspace application will likely | |
| * use lists for pads/links, just as we intend to do in Kernelspace. | |
| * The API definition should be freed from fields that are bound to | |
| * some specific data structure. | |
| * | |
| * FIXME: Currently, I opted to name the new types as "media_v2", as this | |
| * won't cause any conflict with the Kernelspace namespace, nor with | |
| * the previous kAPI media_*_desc namespace. This can be changed | |
| * later, before the adding this API upstream. | |
| */ | |
| struct media_v2_entity { | |
| __u32 id; | |
| char name[64]; /* FIXME: move to a property? (RFC says so) */ | |
| __u32 function; /* Main function of the entity */ | |
| __u32 reserved[6]; | |
| } __attribute__ ((packed)); | |
| /* Should match the specific fields at media_intf_devnode */ | |
| struct media_v2_intf_devnode { | |
| __u32 major; | |
| __u32 minor; | |
| } __attribute__ ((packed)); | |
| struct media_v2_interface { | |
| __u32 id; | |
| __u32 intf_type; | |
| __u32 flags; | |
| __u32 reserved[9]; | |
| union { | |
| struct media_v2_intf_devnode devnode; | |
| __u32 raw[16]; | |
| }; | |
| } __attribute__ ((packed)); | |
| struct media_v2_pad { | |
| __u32 id; | |
| __u32 entity_id; | |
| __u32 flags; | |
| __u32 reserved[5]; | |
| } __attribute__ ((packed)); | |
| struct media_v2_link { | |
| __u32 id; | |
| __u32 source_id; | |
| __u32 sink_id; | |
| __u32 flags; | |
| __u32 reserved[6]; | |
| } __attribute__ ((packed)); | |
| struct media_v2_topology { | |
| __u64 topology_version; | |
| __u32 num_entities; | |
| __u32 reserved1; | |
| __u64 ptr_entities; | |
| __u32 num_interfaces; | |
| __u32 reserved2; | |
| __u64 ptr_interfaces; | |
| __u32 num_pads; | |
| __u32 reserved3; | |
| __u64 ptr_pads; | |
| __u32 num_links; | |
| __u32 reserved4; | |
| __u64 ptr_links; | |
| } __attribute__ ((packed)); | |
| /* ioctls */ | |
| #define MEDIA_IOC_DEVICE_INFO _IOWR('|', 0x00, struct media_device_info) | |
| #define MEDIA_IOC_ENUM_ENTITIES _IOWR('|', 0x01, struct media_entity_desc) | |
| #define MEDIA_IOC_ENUM_LINKS _IOWR('|', 0x02, struct media_links_enum) | |
| #define MEDIA_IOC_SETUP_LINK _IOWR('|', 0x03, struct media_link_desc) | |
| #define MEDIA_IOC_G_TOPOLOGY _IOWR('|', 0x04, struct media_v2_topology) | |
| #endif /* __LINUX_MEDIA_H */ |