| /* |
| * Copyright 2015 Vishnu Patekar |
| * Vishnu Patekar <vishnupatekar0510@gmail.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /dts-v1/; |
| #include "sun8i-a83t.dtsi" |
| #include "sunxi-common-regulators.dtsi" |
| |
| / { |
| model = "Allwinner A83T H8Homlet Proto Dev Board v2.0"; |
| compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t"; |
| |
| aliases { |
| serial0 = &uart0; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| }; |
| |
| &ehci0 { |
| status = "okay"; |
| }; |
| |
| &mmc0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc0_pins>; |
| vmmc-supply = <®_vcc3v0>; |
| cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ |
| bus-width = <4>; |
| cd-inverted; |
| status = "okay"; |
| }; |
| |
| &mmc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc2_8bit_emmc_pins>; |
| vmmc-supply = <®_vcc3v0>; |
| bus-width = <8>; |
| non-removable; |
| cap-mmc-hw-reset; |
| status = "okay"; |
| }; |
| |
| &ohci0 { |
| status = "okay"; |
| }; |
| |
| ®_usb0_vbus { |
| gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ |
| status = "okay"; |
| }; |
| |
| ®_usb1_vbus { |
| gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ |
| status = "okay"; |
| }; |
| |
| &r_rsb { |
| status = "okay"; |
| |
| axp81x: pmic@3a3 { |
| compatible = "x-powers,axp818", "x-powers,axp813"; |
| reg = <0x3a3>; |
| interrupt-parent = <&r_intc>; |
| interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| ac100: codec@e89 { |
| compatible = "x-powers,ac100"; |
| reg = <0xe89>; |
| |
| ac100_codec: codec { |
| compatible = "x-powers,ac100-codec"; |
| interrupt-parent = <&r_pio>; |
| interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */ |
| #clock-cells = <0>; |
| clock-output-names = "4M_adda"; |
| }; |
| |
| ac100_rtc: rtc { |
| compatible = "x-powers,ac100-rtc"; |
| interrupt-parent = <&r_intc>; |
| interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&ac100_codec>; |
| #clock-cells = <1>; |
| clock-output-names = "cko1_rtc", |
| "cko2_rtc", |
| "cko3_rtc"; |
| }; |
| }; |
| }; |
| |
| &uart0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_pb_pins>; |
| status = "okay"; |
| }; |
| |
| &usbphy { |
| usb0_vbus-supply = <®_usb0_vbus>; |
| usb1_vbus-supply = <®_usb1_vbus>; |
| status = "okay"; |
| }; |
| |
| &usb_otg { |
| dr_mode = "host"; |
| status = "okay"; |
| }; |