| /* | |
| * Driver for Semtech SX8654 I2C touchscreen controller. | |
| * | |
| * Copyright (c) 2015 Armadeus Systems | |
| * Sébastien Szymanski <sebastien.szymanski@armadeus.com> | |
| * | |
| * Using code from: | |
| * - sx865x.c | |
| * Copyright (c) 2013 U-MoBo Srl | |
| * Pierluigi Passaro <p.passaro@u-mobo.com> | |
| * - sx8650.c | |
| * Copyright (c) 2009 Wayne Roberts | |
| * - tsc2007.c | |
| * Copyright (c) 2008 Kwangwoo Lee | |
| * - ads7846.c | |
| * Copyright (c) 2005 David Brownell | |
| * Copyright (c) 2006 Nokia Corporation | |
| * - corgi_ts.c | |
| * Copyright (C) 2004-2005 Richard Purdie | |
| * - omap_ts.[hc], ads7846.h, ts_osk.c | |
| * Copyright (C) 2002 MontaVista Software | |
| * Copyright (C) 2004 Texas Instruments | |
| * Copyright (C) 2005 Dirk Behme | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/input.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/i2c.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| /* register addresses */ | |
| #define I2C_REG_TOUCH0 0x00 | |
| #define I2C_REG_TOUCH1 0x01 | |
| #define I2C_REG_CHANMASK 0x04 | |
| #define I2C_REG_IRQMASK 0x22 | |
| #define I2C_REG_IRQSRC 0x23 | |
| #define I2C_REG_SOFTRESET 0x3f | |
| /* commands */ | |
| #define CMD_READ_REGISTER 0x40 | |
| #define CMD_MANUAL 0xc0 | |
| #define CMD_PENTRG 0xe0 | |
| /* value for I2C_REG_SOFTRESET */ | |
| #define SOFTRESET_VALUE 0xde | |
| /* bits for I2C_REG_IRQSRC */ | |
| #define IRQ_PENTOUCH_TOUCHCONVDONE 0x08 | |
| #define IRQ_PENRELEASE 0x04 | |
| /* bits for RegTouch1 */ | |
| #define CONDIRQ 0x20 | |
| #define FILT_7SA 0x03 | |
| /* bits for I2C_REG_CHANMASK */ | |
| #define CONV_X 0x80 | |
| #define CONV_Y 0x40 | |
| /* coordinates rate: higher nibble of CTRL0 register */ | |
| #define RATE_MANUAL 0x00 | |
| #define RATE_5000CPS 0xf0 | |
| /* power delay: lower nibble of CTRL0 register */ | |
| #define POWDLY_1_1MS 0x0b | |
| #define MAX_12BIT ((1 << 12) - 1) | |
| struct sx8654 { | |
| struct input_dev *input; | |
| struct i2c_client *client; | |
| }; | |
| static irqreturn_t sx8654_irq(int irq, void *handle) | |
| { | |
| struct sx8654 *sx8654 = handle; | |
| int irqsrc; | |
| u8 data[4]; | |
| unsigned int x, y; | |
| int retval; | |
| irqsrc = i2c_smbus_read_byte_data(sx8654->client, | |
| CMD_READ_REGISTER | I2C_REG_IRQSRC); | |
| dev_dbg(&sx8654->client->dev, "irqsrc = 0x%x", irqsrc); | |
| if (irqsrc < 0) | |
| goto out; | |
| if (irqsrc & IRQ_PENRELEASE) { | |
| dev_dbg(&sx8654->client->dev, "pen release interrupt"); | |
| input_report_key(sx8654->input, BTN_TOUCH, 0); | |
| input_sync(sx8654->input); | |
| } | |
| if (irqsrc & IRQ_PENTOUCH_TOUCHCONVDONE) { | |
| dev_dbg(&sx8654->client->dev, "pen touch interrupt"); | |
| retval = i2c_master_recv(sx8654->client, data, sizeof(data)); | |
| if (retval != sizeof(data)) | |
| goto out; | |
| /* invalid data */ | |
| if (unlikely(data[0] & 0x80 || data[2] & 0x80)) | |
| goto out; | |
| x = ((data[0] & 0xf) << 8) | (data[1]); | |
| y = ((data[2] & 0xf) << 8) | (data[3]); | |
| input_report_abs(sx8654->input, ABS_X, x); | |
| input_report_abs(sx8654->input, ABS_Y, y); | |
| input_report_key(sx8654->input, BTN_TOUCH, 1); | |
| input_sync(sx8654->input); | |
| dev_dbg(&sx8654->client->dev, "point(%4d,%4d)\n", x, y); | |
| } | |
| out: | |
| return IRQ_HANDLED; | |
| } | |
| static int sx8654_open(struct input_dev *dev) | |
| { | |
| struct sx8654 *sx8654 = input_get_drvdata(dev); | |
| struct i2c_client *client = sx8654->client; | |
| int error; | |
| /* enable pen trigger mode */ | |
| error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, | |
| RATE_5000CPS | POWDLY_1_1MS); | |
| if (error) { | |
| dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed"); | |
| return error; | |
| } | |
| error = i2c_smbus_write_byte(client, CMD_PENTRG); | |
| if (error) { | |
| dev_err(&client->dev, "writing command CMD_PENTRG failed"); | |
| return error; | |
| } | |
| enable_irq(client->irq); | |
| return 0; | |
| } | |
| static void sx8654_close(struct input_dev *dev) | |
| { | |
| struct sx8654 *sx8654 = input_get_drvdata(dev); | |
| struct i2c_client *client = sx8654->client; | |
| int error; | |
| disable_irq(client->irq); | |
| /* enable manual mode mode */ | |
| error = i2c_smbus_write_byte(client, CMD_MANUAL); | |
| if (error) { | |
| dev_err(&client->dev, "writing command CMD_MANUAL failed"); | |
| return; | |
| } | |
| error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0); | |
| if (error) { | |
| dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed"); | |
| return; | |
| } | |
| } | |
| static int sx8654_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct sx8654 *sx8654; | |
| struct input_dev *input; | |
| int error; | |
| if (!i2c_check_functionality(client->adapter, | |
| I2C_FUNC_SMBUS_READ_WORD_DATA)) | |
| return -ENXIO; | |
| sx8654 = devm_kzalloc(&client->dev, sizeof(*sx8654), GFP_KERNEL); | |
| if (!sx8654) | |
| return -ENOMEM; | |
| input = devm_input_allocate_device(&client->dev); | |
| if (!input) | |
| return -ENOMEM; | |
| input->name = "SX8654 I2C Touchscreen"; | |
| input->id.bustype = BUS_I2C; | |
| input->dev.parent = &client->dev; | |
| input->open = sx8654_open; | |
| input->close = sx8654_close; | |
| __set_bit(INPUT_PROP_DIRECT, input->propbit); | |
| input_set_capability(input, EV_KEY, BTN_TOUCH); | |
| input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0); | |
| input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0); | |
| sx8654->client = client; | |
| sx8654->input = input; | |
| input_set_drvdata(sx8654->input, sx8654); | |
| error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET, | |
| SOFTRESET_VALUE); | |
| if (error) { | |
| dev_err(&client->dev, "writing softreset value failed"); | |
| return error; | |
| } | |
| error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK, | |
| CONV_X | CONV_Y); | |
| if (error) { | |
| dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed"); | |
| return error; | |
| } | |
| error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK, | |
| IRQ_PENTOUCH_TOUCHCONVDONE | | |
| IRQ_PENRELEASE); | |
| if (error) { | |
| dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed"); | |
| return error; | |
| } | |
| error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1, | |
| CONDIRQ | FILT_7SA); | |
| if (error) { | |
| dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed"); | |
| return error; | |
| } | |
| error = devm_request_threaded_irq(&client->dev, client->irq, | |
| NULL, sx8654_irq, | |
| IRQF_TRIGGER_FALLING | IRQF_ONESHOT, | |
| client->name, sx8654); | |
| if (error) { | |
| dev_err(&client->dev, | |
| "Failed to enable IRQ %d, error: %d\n", | |
| client->irq, error); | |
| return error; | |
| } | |
| /* Disable the IRQ, we'll enable it in sx8654_open() */ | |
| disable_irq(client->irq); | |
| error = input_register_device(sx8654->input); | |
| if (error) | |
| return error; | |
| return 0; | |
| } | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id sx8654_of_match[] = { | |
| { .compatible = "semtech,sx8654", }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, sx8654_of_match); | |
| #endif | |
| static const struct i2c_device_id sx8654_id_table[] = { | |
| { "semtech_sx8654", 0 }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, sx8654_id_table); | |
| static struct i2c_driver sx8654_driver = { | |
| .driver = { | |
| .name = "sx8654", | |
| .of_match_table = of_match_ptr(sx8654_of_match), | |
| }, | |
| .id_table = sx8654_id_table, | |
| .probe = sx8654_probe, | |
| }; | |
| module_i2c_driver(sx8654_driver); | |
| MODULE_AUTHOR("Sébastien Szymanski <sebastien.szymanski@armadeus.com>"); | |
| MODULE_DESCRIPTION("Semtech SX8654 I2C Touchscreen Driver"); | |
| MODULE_LICENSE("GPL"); |