| /* |
| * Copyright 2018 NXP |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "fsl-imx8mq-som.dtsi" |
| |
| / { |
| firmware { |
| android { |
| compatible = "android,firmware"; |
| fstab { |
| compatible = "android,fstab"; |
| vendor { |
| compatible = "android,vendor"; |
| /* if sd, then dev = "/dev/block/platform/30b50000.usdhc/by-name/vendor"; */ |
| dev = "/dev/block/platform/30b40000.usdhc/by-name/vendor"; |
| type = "ext4"; |
| mnt_flags = "ro,barrier=1,inode_readahead_blks=8"; |
| fsmgr_flags = "wait,slotselect,avb"; |
| }; |
| }; |
| vbmeta { |
| /*we need use FirstStageMountVBootV2 if we enable avb*/ |
| compatible = "android,vbmeta"; |
| /*parts means the partition witch can be mount in first stage*/ |
| parts = "vbmeta,boot,system,vendor"; |
| }; |
| }; |
| }; |
| }; |
| |
| |
| / { |
| model = "Freescale i.MX8MQ Phanbell"; |
| compatible = "fsl,imx8mq-phanbell", "fsl,imx8mq"; |
| |
| sound-rt5645 { |
| compatible = "google,edgetpu-audio-card"; |
| model = "edgetpu-audio-card"; |
| audio-cpu = <&sai2>; |
| audio-codec = <&rt5645>; |
| google,model = "edgetpu-audio-card"; |
| status = "okay"; |
| }; |
| |
| busfreq { |
| status = "disabled"; |
| }; |
| |
| fan: gpio_fan { |
| gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| sound-rt5645 { |
| compatible = "google,edgetpu-audio-card"; |
| model = "edgetpu-audio-card"; |
| audio-cpu = <&sai2>; |
| audio-codec = <&rt5645>; |
| google,model = "edgetpu-audio-card"; |
| status = "okay"; |
| }; |
| }; |
| |
| &iomuxc { |
| imx8mq-phanbell { |
| pinctrl_sai2: sai2grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 |
| MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 |
| MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 |
| MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 |
| MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0xd6 |
| >; |
| }; |
| }; |
| }; |
| |
| &iomuxc { |
| imx8mq-phanbell { |
| pinctrl_sai1: sai1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC 0xd6 |
| MX8MQ_IOMUXC_SAI1_TXC_SAI1_TX_BCLK 0xd6 |
| MX8MQ_IOMUXC_SAI1_MCLK_SAI1_MCLK 0xd6 |
| MX8MQ_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0 0xd6 |
| MX8MQ_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0 0xd6 |
| >; |
| }; |
| pinctrl_sai2: sai2grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 |
| MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 |
| MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 |
| MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 |
| MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 |
| MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4 0xd6 |
| >; |
| }; |
| }; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm1>; |
| status = "okay"; |
| }; |
| |
| &pwm2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm2>; |
| status = "okay"; |
| }; |
| |
| &pwm3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm3>; |
| status = "okay"; |
| }; |
| |
| &ecspi1 { |
| fsl,spi-num-chipselects = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; |
| cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>, |
| <&gpio3 2 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| |
| spidev@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "rohm,dh2228fv"; |
| spi-max-frequency = <20000000>; |
| reg = <0>; |
| status = "okay"; |
| }; |
| spidev@1 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "rohm,dh2228fv"; |
| spi-max-frequency = <20000000>; |
| reg = <1>; |
| status = "okay"; |
| }; |
| |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio>; |
| |
| imx8mq-phanbell { |
| pinctrl_gpio: gpio_ctrlgrp{ |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 |
| MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 |
| MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 |
| MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 |
| MX8MQ_IOMUXC_NAND_DATA07_GPIO3_IO13 0x19 |
| MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 |
| MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x19 |
| MX8MQ_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x19 |
| MX8MQ_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x19 |
| MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 |
| >; |
| }; |
| |
| pinctrl_pwm1: pwm1 { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT 0x7f |
| >; |
| }; |
| |
| pinctrl_pwm2: pwm2 { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT 0x7f |
| >; |
| }; |
| |
| pinctrl_pwm3: pwm3 { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO14_PWM3_OUT 0x7f |
| >; |
| }; |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 |
| MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 |
| MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 |
| >; |
| }; |
| pinctrl_ecspi1_cs: ecspi1_cs_grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x82 |
| MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x82 |
| >; |
| }; |
| pinctrl_csi1: csi1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x19 /* PWDN */ |
| MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x19 /* RESETB */ |
| /* vsync pin mux? can't find in schematic */ |
| >; |
| }; |
| }; |
| }; |
| |
| &hdmi { |
| status = "okay"; |
| }; |
| |
| // &hdmi_cec { |
| // status = "okay"; |
| // }; |
| |
| &dcss { |
| disp-dev = "hdmi_disp"; |
| status = "okay"; |
| }; |
| |
| &sai1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai1>; |
| status = "okay"; |
| }; |
| |
| // <&clk IMX8MQ_CLK_SAI2_DIV>; |
| // assigned-clock-rates = <0>, <24576000>; |
| &sai2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai2>; |
| assigned-clocks = |
| <&clk IMX8MQ_CLK_SAI2>; |
| assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; |
| assigned-clock-rates = <24576000>; |
| status = "okay"; |
| |
| clocks = <&clk IMX8MQ_CLK_SAI2_IPG>, <&clk IMX8MQ_CLK_DUMMY>, |
| <&clk IMX8MQ_CLK_SAI2_ROOT>, <&clk IMX8MQ_CLK_DUMMY>, |
| <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_AUDIO_PLL1_OUT>, |
| <&clk IMX8MQ_AUDIO_PLL2_OUT>; |
| clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k"; |
| }; |
| |
| &i2c2 { |
| status = "okay"; |
| |
| power_monitor_a: power_monitor_a@40 { |
| compatible = "ti,ina226"; |
| reg = <0x40>; |
| shunt-resistor = <68000>; |
| }; |
| power_monitor_b: power_monitor_b@41 { |
| compatible = "ti,ina226"; |
| reg = <0x41>; |
| shunt-resistor = <68000>; |
| }; |
| }; |
| |
| &usb_dwc3_0 { |
| extcon = <&typec_ptn5150>; |
| }; |
| |
| &i2c3 { |
| status = "okay"; |
| |
| rt5645: rt5645@1a { |
| compatible = "realtek,rt5645"; |
| reg = <0x1a>; |
| clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; |
| clock-names = "mclk1"; |
| status = "okay"; |
| realtek,dmic1-data-pin = <2>; // GPIO5 |
| realtek,jd-mode = <0>; |
| realtek,jd-invert; |
| realtek,jd-low-volt-enable; |
| interrupt-parent = <&gpio5>; |
| interrupts = <4 IRQ_TYPE_EDGE_BOTH>; |
| hp-detect-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| typec_ptn5150: ptn5150@3d { |
| compatible = "nxp,ptn5150a"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_typec>; |
| reg = <0x3d>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <0 IRQ_TYPE_EDGE_FALLING>; |
| }; |
| }; |
| |
| &i2c2 { |
| status = "okay"; |
| |
| ov5645_mipi: ov5645_mipi@3c { |
| compatible = "ovti,ov5645_mipi"; |
| reg = <0x3c>; |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_csi1>; |
| clocks = <&clk IMX8MQ_CLK_DUMMY>; |
| clock-names = "csi_mclk"; |
| csi_id = <0>; |
| pwn-gpios = <&gpio3 8 1>; |
| rst-gpios = <&gpio1 12 0>; |
| mclk = <20000000>; |
| mclk_source = <0>; |
| ae_target = <52>; |
| port { |
| ov5645_mipi1_ep: endpoint { |
| remote-endpoint = <&mipi1_sensor_ep>; |
| }; |
| }; |
| }; |
| }; |
| |
| &csi1_bridge { |
| fsl,mipi-mode; |
| fsl,two-8bit-sensor-mode; |
| status = "okay"; |
| |
| port { |
| csi1_ep: endpoint { |
| remote-endpoint = <&csi1_mipi_ep>; |
| }; |
| }; |
| }; |
| |
| &mipi_csi_1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "okay"; |
| port { |
| mipi1_sensor_ep: endpoint1 { |
| remote-endpoint = <&ov5645_mipi1_ep>; |
| data-lanes = <1 2>; |
| }; |
| |
| csi1_mipi_ep: endpoint2 { |
| remote-endpoint = <&csi1_ep>; |
| }; |
| }; |
| }; |
| |
