| * Holt HI-311X stand-alone CAN controller device tree bindings |
| |
| Required properties: |
| - compatible: Should be one of the following: |
| - "holt,hi3110" for HI-3110 |
| - reg: SPI chip select. |
| - clocks: The clock feeding the CAN controller. |
| - interrupt-parent: The parent interrupt controller. |
| - interrupts: Should contain IRQ line for the CAN controller. |
| |
| Optional properties: |
| - vdd-supply: Regulator that powers the CAN controller. |
| - xceiver-supply: Regulator that powers the CAN transceiver. |
| |
| Example: |
| can0: can@1 { |
| compatible = "holt,hi3110"; |
| reg = <1>; |
| clocks = <&clk32m>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; |
| vdd-supply = <®5v0>; |
| xceiver-supply = <®5v0>; |
| }; |