| config FB_MXC |
| tristate "MXC Framebuffer support" |
| depends on FB |
| select FB_CFB_FILLRECT |
| select FB_CFB_COPYAREA |
| select FB_CFB_IMAGEBLIT |
| select FB_MODE_HELPERS |
| default y |
| help |
| This is a framebuffer device for the MXC LCD Controller. |
| See <http://www.linux-fbdev.org/> for information on framebuffer |
| devices. |
| |
| If you plan to use the LCD display with your MXC system, say |
| Y here. |
| |
| config FB_MXC_DISP_FRAMEWORK |
| tristate "Display driver framework" |
| help |
| This is a framework that helps with registration and data handling |
| between fb drivers and display drivers. |
| |
| It is selected by drivers which use this framework as linkage code |
| between display controllers and panels. |
| |
| config FB_MXC_SYNC_PANEL |
| depends on FB_MXC && !FB_IMX64 |
| depends on MXC_IPU_V3 |
| select FB_MXC_DISP_FRAMEWORK |
| tristate "Synchronous Panel Framebuffer" |
| |
| config FB_MXC_OVERLAY |
| depends on FB_MXC |
| tristate "Overlay Framebuffer" |
| default n |
| help |
| Enhanced LCD controller of MXC has overlay function. |
| |
| config FB_MXC_MIPI_DSI |
| tristate "MXC MIPI_DSI" |
| depends on FB_MXC_SYNC_PANEL |
| depends on MXC_IPU_V3 |
| |
| config FB_MXC_MIPI_DSI_SAMSUNG |
| tristate "MXC MIPI_DSI_SAMSUNG" |
| depends on FB_MXC_SYNC_PANEL |
| depends on FB_MXS |
| |
| config FB_MXC_MIPI_DSI_NORTHWEST |
| tristate "MXC MIPI_DSI_NORTHWEST" |
| depends on FB_MXC_DISP_FRAMEWORK || FB_MXC_SYNC_PANEL |
| depends on FB_MXS |
| |
| config FB_MXC_TRULY_WVGA_SYNC_PANEL |
| tristate "TRULY WVGA Panel" |
| depends on FB_MXC_DISP_FRAMEWORK || FB_MXC_SYNC_PANEL |
| depends on FB_MXC_MIPI_DSI || FB_MXC_MIPI_DSI_SAMSUNG || FB_MXC_MIPI_DSI_NORTHWEST |
| |
| config FB_MXC_TRULY_PANEL_TFT3P5079E |
| tristate "TRULY Panel TFT3P5079E" |
| depends on FB_MXC_DISP_FRAMEWORK || FB_MXC_SYNC_PANEL |
| depends on FB_MXC_MIPI_DSI_SAMSUNG |
| |
| config FB_MXC_TRULY_PANEL_TFT3P5581E |
| tristate "TRULY Panel TFT3P5581E" |
| depends on FB_MXC_DISP_FRAMEWORK || FB_MXC_SYNC_PANEL |
| depends on FB_MXC_MIPI_DSI_SAMSUNG || FB_MXC_MIPI_DSI_NORTHWEST |
| |
| config FB_MXC_RK_PANEL_RK055AHD042 |
| tristate "ROCKTECH Panel RK055AHD042" |
| depends on FB_MXC_DISP_FRAMEWORK || FB_MXC_SYNC_PANEL |
| depends on FB_MXC_MIPI_DSI_NORTHWEST |
| |
| config FB_MXC_RK_PANEL_RK055IQH042 |
| tristate "ROCKTECH Panel RK055IQH042" |
| depends on FB_MXC_DISP_FRAMEWORK || FB_MXC_SYNC_PANEL |
| depends on FB_MXC_MIPI_DSI_NORTHWEST |
| |
| config FB_MXC_LDB |
| tristate "MXC LDB" |
| depends on FB_MXC_SYNC_PANEL |
| depends on MXC_IPU_V3 || FB_MXS |
| select VIDEOMODE_HELPERS |
| |
| config FB_MXC_HDMI |
| depends on FB_MXC_SYNC_PANEL |
| depends on MXC_IPU_V3 |
| depends on I2C |
| tristate "MXC HDMI driver support" |
| select MFD_MXC_HDMI |
| help |
| Driver for the on-chip MXC HDMI controller. |
| |
| config FB_MXC_EDID |
| depends on FB_MXC && I2C |
| tristate "MXC EDID support" |
| default y |
| |
| config FB_MXS_SII902X |
| tristate "Si Image SII9022 DVI/HDMI Interface Chip" |
| depends on FB_MXS && I2C |
| |
| config FB_MXC_DCIC |
| tristate "MXC DCIC" |
| depends on FB_MXC_SYNC_PANEL |
| depends on MXC_IPU_V3 || FB_MXS |
| select VIDEOMODE_HELPERS |
| |
| config FB_MXC_ADV7535 |
| tristate "ADI ADV7535 support" |
| depends on I2C |
| depends on FB_MXC_MIPI_DSI || FB_MXC_MIPI_DSI_NORTHWEST |
| help |
| Driver support for the ADV7535 DSI-to-HDMI module |
| |
| config HANNSTAR_CABC |
| tristate "Hannstar CABC function" |
| help |
| Say yes here to support switching on/off Hannstar CABC |
| function. This function turns backlight density of a |
| display panel automatically according to the content |
| shown on the panel. |
| |
| config FB_MXC_EINK_PANEL |
| depends on FB_MXC |
| depends on DMA_ENGINE |
| select FB_DEFERRED_IO |
| tristate "E-Ink Panel Framebuffer" |
| |
| config FB_MXC_EINK_V2_PANEL |
| depends on FB_MXC |
| depends on DMA_ENGINE |
| select FB_DEFERRED_IO |
| tristate "E-Ink Panel Framebuffer based on EPDC V2" |
| |
| config FB_MXC_EINK_AUTO_UPDATE_MODE |
| bool "E-Ink Auto-update Mode Support" |
| depends on FB_MXC_EINK_PANEL |
| |
| config FB_DCSS |
| tristate "DCSS multi-layer framebuffer support" |
| depends on FB_MXC && ARCH_FSL_IMX8MQ |
| default y |
| help |
| Framebuffer support the DCSS controller in imx8mq platform. |
| DCSS support 3 layer compsition. |
