| /****************************************************************************** |
| * |
| * Copyright(c) 2009-2014 Realtek Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * wlanfae <wlanfae@realtek.com> |
| * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, |
| * Hsinchu 300, Taiwan. |
| * |
| * Larry Finger <Larry.Finger@lwfinger.net> |
| * |
| *****************************************************************************/ |
| |
| #include "../wifi.h" |
| #include "reg.h" |
| #include "def.h" |
| #include "phy.h" |
| #include "rf.h" |
| #include "dm.h" |
| |
| static bool _rtl8723be_phy_rf6052_config_parafile(struct ieee80211_hw *hw); |
| |
| void rtl8723be_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| |
| switch (bandwidth) { |
| case HT_CHANNEL_WIDTH_20: |
| rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] & |
| 0xfffff3ff) | BIT(10) | BIT(11)); |
| rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK, |
| rtlphy->rfreg_chnlval[0]); |
| break; |
| case HT_CHANNEL_WIDTH_20_40: |
| rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] & |
| 0xfffff3ff) | BIT(10)); |
| rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK, |
| rtlphy->rfreg_chnlval[0]); |
| break; |
| default: |
| pr_err("unknown bandwidth: %#X\n", bandwidth); |
| break; |
| } |
| } |
| |
| void rtl8723be_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw, |
| u8 *ppowerlevel) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| u32 tx_agc[2] = {0, 0}, tmpval; |
| bool turbo_scanoff = false; |
| u8 idx1, idx2; |
| u8 *ptr; |
| u8 direction; |
| u32 pwrtrac_value; |
| |
| if (rtlefuse->eeprom_regulatory != 0) |
| turbo_scanoff = true; |
| |
| if (mac->act_scanning) { |
| tx_agc[RF90_PATH_A] = 0x3f3f3f3f; |
| tx_agc[RF90_PATH_B] = 0x3f3f3f3f; |
| |
| if (turbo_scanoff) { |
| for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) { |
| tx_agc[idx1] = ppowerlevel[idx1] | |
| (ppowerlevel[idx1] << 8) | |
| (ppowerlevel[idx1] << 16) | |
| (ppowerlevel[idx1] << 24); |
| } |
| } |
| } else { |
| for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) { |
| tx_agc[idx1] = ppowerlevel[idx1] | |
| (ppowerlevel[idx1] << 8) | |
| (ppowerlevel[idx1] << 16) | |
| (ppowerlevel[idx1] << 24); |
| } |
| |
| if (rtlefuse->eeprom_regulatory == 0) { |
| tmpval = |
| (rtlphy->mcs_txpwrlevel_origoffset[0][6]) + |
| (rtlphy->mcs_txpwrlevel_origoffset[0][7] << 8); |
| tx_agc[RF90_PATH_A] += tmpval; |
| |
| tmpval = (rtlphy->mcs_txpwrlevel_origoffset[0][14]) + |
| (rtlphy->mcs_txpwrlevel_origoffset[0][15] << |
| 24); |
| tx_agc[RF90_PATH_B] += tmpval; |
| } |
| } |
| |
| for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) { |
| ptr = (u8 *)(&(tx_agc[idx1])); |
| for (idx2 = 0; idx2 < 4; idx2++) { |
| if (*ptr > RF6052_MAX_TX_PWR) |
| *ptr = RF6052_MAX_TX_PWR; |
| ptr++; |
| } |
| } |
| rtl8723be_dm_txpower_track_adjust(hw, 1, &direction, &pwrtrac_value); |
| if (direction == 1) { |
| tx_agc[0] += pwrtrac_value; |
| tx_agc[1] += pwrtrac_value; |
| } else if (direction == 2) { |
| tx_agc[0] -= pwrtrac_value; |
| tx_agc[1] -= pwrtrac_value; |
| } |
| tmpval = tx_agc[RF90_PATH_A] & 0xff; |
| rtl_set_bbreg(hw, RTXAGC_A_CCK1_MCS32, MASKBYTE1, tmpval); |
| |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "CCK PWR 1M (rf-A) = 0x%x (reg 0x%x)\n", tmpval, |
| RTXAGC_A_CCK1_MCS32); |
| |
| tmpval = tx_agc[RF90_PATH_A] >> 8; |
| |
| /*tmpval = tmpval & 0xff00ffff;*/ |
| |
| rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval); |
| |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "CCK PWR 2~11M (rf-A) = 0x%x (reg 0x%x)\n", tmpval, |
| RTXAGC_B_CCK11_A_CCK2_11); |
| |
| tmpval = tx_agc[RF90_PATH_B] >> 24; |
| rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, MASKBYTE0, tmpval); |
| |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "CCK PWR 11M (rf-B) = 0x%x (reg 0x%x)\n", tmpval, |
| RTXAGC_B_CCK11_A_CCK2_11); |
| |
| tmpval = tx_agc[RF90_PATH_B] & 0x00ffffff; |
| rtl_set_bbreg(hw, RTXAGC_B_CCK1_55_MCS32, 0xffffff00, tmpval); |
| |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "CCK PWR 1~5.5M (rf-B) = 0x%x (reg 0x%x)\n", tmpval, |
| RTXAGC_B_CCK1_55_MCS32); |
| } |
| |
| static void rtl8723be_phy_get_power_base(struct ieee80211_hw *hw, |
| u8 *ppowerlevel_ofdm, |
| u8 *ppowerlevel_bw20, |
| u8 *ppowerlevel_bw40, |
| u8 channel, u32 *ofdmbase, |
| u32 *mcsbase) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| u32 powerbase0, powerbase1; |
| u8 i, powerlevel[2]; |
| |
| for (i = 0; i < 2; i++) { |
| powerbase0 = ppowerlevel_ofdm[i]; |
| |
| powerbase0 = (powerbase0 << 24) | (powerbase0 << 16) | |
| (powerbase0 << 8) | powerbase0; |
| *(ofdmbase + i) = powerbase0; |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| " [OFDM power base index rf(%c) = 0x%x]\n", |
| ((i == 0) ? 'A' : 'B'), *(ofdmbase + i)); |
| } |
| |
| for (i = 0; i < 2; i++) { |
| if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) |
| powerlevel[i] = ppowerlevel_bw20[i]; |
| else |
| powerlevel[i] = ppowerlevel_bw40[i]; |
| |
| powerbase1 = powerlevel[i]; |
| powerbase1 = (powerbase1 << 24) | (powerbase1 << 16) | |
| (powerbase1 << 8) | powerbase1; |
| |
| *(mcsbase + i) = powerbase1; |
| |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| " [MCS power base index rf(%c) = 0x%x]\n", |
| ((i == 0) ? 'A' : 'B'), *(mcsbase + i)); |
| } |
| } |
| |
| static void _rtl8723be_get_txpower_writeval_by_regulatory( |
| struct ieee80211_hw *hw, |
| u8 channel, u8 index, |
| u32 *powerbase0, |
| u32 *powerbase1, |
| u32 *p_outwriteval) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| u8 i, chnlgroup = 0, pwr_diff_limit[4], pwr_diff = 0, customer_pwr_diff; |
| u32 writeval, customer_limit, rf; |
| |
| for (rf = 0; rf < 2; rf++) { |
| switch (rtlefuse->eeprom_regulatory) { |
| case 0: |
| chnlgroup = 0; |
| |
| writeval = |
| rtlphy->mcs_txpwrlevel_origoffset[chnlgroup][index + |
| (rf ? 8 : 0)] |
| + ((index < 2) ? powerbase0[rf] : powerbase1[rf]); |
| |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "RTK better performance, writeval(%c) = 0x%x\n", |
| ((rf == 0) ? 'A' : 'B'), writeval); |
| break; |
| case 1: |
| if (rtlphy->pwrgroup_cnt == 1) { |
| chnlgroup = 0; |
| } else { |
| if (channel < 3) |
| chnlgroup = 0; |
| else if (channel < 6) |
| chnlgroup = 1; |
| else if (channel < 9) |
| chnlgroup = 2; |
| else if (channel < 12) |
| chnlgroup = 3; |
| else if (channel < 14) |
| chnlgroup = 4; |
| else if (channel == 14) |
| chnlgroup = 5; |
| } |
| |
| writeval = |
| rtlphy->mcs_txpwrlevel_origoffset[chnlgroup] |
| [index + (rf ? 8 : 0)] + ((index < 2) ? |
| powerbase0[rf] : |
| powerbase1[rf]); |
| |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "Realtek regulatory, 20MHz, writeval(%c) = 0x%x\n", |
| ((rf == 0) ? 'A' : 'B'), writeval); |
| |
| break; |
| case 2: |
| writeval = |
| ((index < 2) ? powerbase0[rf] : powerbase1[rf]); |
| |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "Better regulatory, writeval(%c) = 0x%x\n", |
| ((rf == 0) ? 'A' : 'B'), writeval); |
| break; |
| case 3: |
| chnlgroup = 0; |
| |
| if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) { |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "customer's limit, 40MHz rf(%c) = 0x%x\n", |
| ((rf == 0) ? 'A' : 'B'), |
| rtlefuse->pwrgroup_ht40 |
| [rf][channel - 1]); |
| } else { |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "customer's limit, 20MHz rf(%c) = 0x%x\n", |
| ((rf == 0) ? 'A' : 'B'), |
| rtlefuse->pwrgroup_ht20 |
| [rf][channel - 1]); |
| } |
| |
| if (index < 2) |
| pwr_diff = |
| rtlefuse->txpwr_legacyhtdiff[rf][channel-1]; |
| else if (rtlphy->current_chan_bw == |
| HT_CHANNEL_WIDTH_20) |
| pwr_diff = |
| rtlefuse->txpwr_ht20diff[rf][channel-1]; |
| |
| if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) |
| customer_pwr_diff = |
| rtlefuse->pwrgroup_ht40[rf][channel-1]; |
| else |
| customer_pwr_diff = |
| rtlefuse->pwrgroup_ht20[rf][channel-1]; |
| |
| if (pwr_diff > customer_pwr_diff) |
| pwr_diff = 0; |
| else |
| pwr_diff = customer_pwr_diff - pwr_diff; |
| |
| for (i = 0; i < 4; i++) { |
| pwr_diff_limit[i] = |
| (u8)((rtlphy->mcs_txpwrlevel_origoffset |
| [chnlgroup][index + (rf ? 8 : 0)] & |
| (0x7f << (i * 8))) >> (i * 8)); |
| |
| if (pwr_diff_limit[i] > pwr_diff) |
| pwr_diff_limit[i] = pwr_diff; |
| } |
| |
| customer_limit = (pwr_diff_limit[3] << 24) | |
| (pwr_diff_limit[2] << 16) | |
| (pwr_diff_limit[1] << 8) | |
| (pwr_diff_limit[0]); |
| |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "Customer's limit rf(%c) = 0x%x\n", |
| ((rf == 0) ? 'A' : 'B'), customer_limit); |
| |
| writeval = customer_limit + ((index < 2) ? |
| powerbase0[rf] : |
| powerbase1[rf]); |
| |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "Customer, writeval rf(%c)= 0x%x\n", |
| ((rf == 0) ? 'A' : 'B'), writeval); |
| break; |
| default: |
| chnlgroup = 0; |
| writeval = |
| rtlphy->mcs_txpwrlevel_origoffset[chnlgroup] |
| [index + (rf ? 8 : 0)] |
| + ((index < 2) ? powerbase0[rf] : powerbase1[rf]); |
| |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "RTK better performance, writeval rf(%c) = 0x%x\n", |
| ((rf == 0) ? 'A' : 'B'), writeval); |
| break; |
| } |
| |
| if (rtlpriv->dm.dynamic_txhighpower_lvl == TXHIGHPWRLEVEL_BT1) |
| writeval = writeval - 0x06060606; |
| else if (rtlpriv->dm.dynamic_txhighpower_lvl == |
| TXHIGHPWRLEVEL_BT2) |
| writeval = writeval - 0x0c0c0c0c; |
| *(p_outwriteval + rf) = writeval; |
| } |
| } |
| |
| static void _rtl8723be_write_ofdm_power_reg(struct ieee80211_hw *hw, |
| u8 index, u32 *pvalue) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u16 regoffset_a[6] = { |
| RTXAGC_A_RATE18_06, RTXAGC_A_RATE54_24, |
| RTXAGC_A_MCS03_MCS00, RTXAGC_A_MCS07_MCS04, |
| RTXAGC_A_MCS11_MCS08, RTXAGC_A_MCS15_MCS12 |
| }; |
| u16 regoffset_b[6] = { |
| RTXAGC_B_RATE18_06, RTXAGC_B_RATE54_24, |
| RTXAGC_B_MCS03_MCS00, RTXAGC_B_MCS07_MCS04, |
| RTXAGC_B_MCS11_MCS08, RTXAGC_B_MCS15_MCS12 |
| }; |
| u8 i, rf, pwr_val[4]; |
| u32 writeval; |
| u16 regoffset; |
| |
| for (rf = 0; rf < 2; rf++) { |
| writeval = pvalue[rf]; |
| for (i = 0; i < 4; i++) { |
| pwr_val[i] = (u8)((writeval & (0x7f << |
| (i * 8))) >> (i * 8)); |
| |
| if (pwr_val[i] > RF6052_MAX_TX_PWR) |
| pwr_val[i] = RF6052_MAX_TX_PWR; |
| } |
| writeval = (pwr_val[3] << 24) | (pwr_val[2] << 16) | |
| (pwr_val[1] << 8) | pwr_val[0]; |
| |
| if (rf == 0) |
| regoffset = regoffset_a[index]; |
| else |
| regoffset = regoffset_b[index]; |
| rtl_set_bbreg(hw, regoffset, MASKDWORD, writeval); |
| |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "Set 0x%x = %08x\n", regoffset, writeval); |
| } |
| } |
| |
| void rtl8723be_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw, |
| u8 *ppowerlevel_ofdm, |
| u8 *ppowerlevel_bw20, |
| u8 *ppowerlevel_bw40, u8 channel) |
| { |
| u32 writeval[2], powerbase0[2], powerbase1[2]; |
| u8 index; |
| u8 direction; |
| u32 pwrtrac_value; |
| |
| rtl8723be_phy_get_power_base(hw, ppowerlevel_ofdm, ppowerlevel_bw20, |
| ppowerlevel_bw40, channel, |
| &powerbase0[0], &powerbase1[0]); |
| |
| rtl8723be_dm_txpower_track_adjust(hw, 1, &direction, &pwrtrac_value); |
| |
| for (index = 0; index < 6; index++) { |
| _rtl8723be_get_txpower_writeval_by_regulatory(hw, |
| channel, index, |
| &powerbase0[0], |
| &powerbase1[0], |
| &writeval[0]); |
| if (direction == 1) { |
| writeval[0] += pwrtrac_value; |
| writeval[1] += pwrtrac_value; |
| } else if (direction == 2) { |
| writeval[0] -= pwrtrac_value; |
| writeval[1] -= pwrtrac_value; |
| } |
| _rtl8723be_write_ofdm_power_reg(hw, index, &writeval[0]); |
| } |
| } |
| |
| bool rtl8723be_phy_rf6052_config(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| |
| if (rtlphy->rf_type == RF_1T1R) |
| rtlphy->num_total_rfpath = 1; |
| else |
| rtlphy->num_total_rfpath = 2; |
| |
| return _rtl8723be_phy_rf6052_config_parafile(hw); |
| |
| } |
| |
| static bool _rtl8723be_phy_rf6052_config_parafile(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| u32 u4_regvalue = 0; |
| u8 rfpath; |
| bool rtstatus = true; |
| struct bb_reg_def *pphyreg; |
| |
| for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) { |
| pphyreg = &rtlphy->phyreg_def[rfpath]; |
| |
| switch (rfpath) { |
| case RF90_PATH_A: |
| case RF90_PATH_C: |
| u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs, |
| BRFSI_RFENV); |
| break; |
| case RF90_PATH_B: |
| case RF90_PATH_D: |
| u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs, |
| BRFSI_RFENV << 16); |
| break; |
| } |
| |
| rtl_set_bbreg(hw, pphyreg->rfintfe, BRFSI_RFENV << 16, 0x1); |
| udelay(1); |
| |
| rtl_set_bbreg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1); |
| udelay(1); |
| |
| rtl_set_bbreg(hw, pphyreg->rfhssi_para2, |
| B3WIREADDREAALENGTH, 0x0); |
| udelay(1); |
| |
| rtl_set_bbreg(hw, pphyreg->rfhssi_para2, B3WIREDATALENGTH, 0x0); |
| udelay(1); |
| |
| switch (rfpath) { |
| case RF90_PATH_A: |
| rtstatus = rtl8723be_phy_config_rf_with_headerfile(hw, |
| (enum radio_path)rfpath); |
| break; |
| case RF90_PATH_B: |
| rtstatus = rtl8723be_phy_config_rf_with_headerfile(hw, |
| (enum radio_path)rfpath); |
| break; |
| case RF90_PATH_C: |
| break; |
| case RF90_PATH_D: |
| break; |
| } |
| |
| switch (rfpath) { |
| case RF90_PATH_A: |
| case RF90_PATH_C: |
| rtl_set_bbreg(hw, pphyreg->rfintfs, |
| BRFSI_RFENV, u4_regvalue); |
| break; |
| case RF90_PATH_B: |
| case RF90_PATH_D: |
| rtl_set_bbreg(hw, pphyreg->rfintfs, |
| BRFSI_RFENV << 16, u4_regvalue); |
| break; |
| } |
| |
| if (!rtstatus) { |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, |
| "Radio[%d] Fail!!\n", rfpath); |
| return false; |
| } |
| } |
| |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "\n"); |
| return rtstatus; |
| } |
