|  | /* | 
|  | * mac80211 configuration hooks for cfg80211 | 
|  | * | 
|  | * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net> | 
|  | * Copyright 2013-2014  Intel Mobile Communications GmbH | 
|  | * | 
|  | * This file is GPLv2 as found in COPYING. | 
|  | */ | 
|  |  | 
|  | #include <linux/ieee80211.h> | 
|  | #include <linux/nl80211.h> | 
|  | #include <linux/rtnetlink.h> | 
|  | #include <linux/slab.h> | 
|  | #include <net/net_namespace.h> | 
|  | #include <linux/rcupdate.h> | 
|  | #include <linux/if_ether.h> | 
|  | #include <net/cfg80211.h> | 
|  | #include "ieee80211_i.h" | 
|  | #include "driver-ops.h" | 
|  | #include "cfg.h" | 
|  | #include "rate.h" | 
|  | #include "mesh.h" | 
|  | #include "wme.h" | 
|  |  | 
|  | static struct wireless_dev *ieee80211_add_iface(struct wiphy *wiphy, | 
|  | const char *name, | 
|  | unsigned char name_assign_type, | 
|  | enum nl80211_iftype type, | 
|  | u32 *flags, | 
|  | struct vif_params *params) | 
|  | { | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  | struct wireless_dev *wdev; | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | int err; | 
|  |  | 
|  | err = ieee80211_if_add(local, name, name_assign_type, &wdev, type, params); | 
|  | if (err) | 
|  | return ERR_PTR(err); | 
|  |  | 
|  | if (type == NL80211_IFTYPE_MONITOR && flags) { | 
|  | sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
|  | sdata->u.mntr_flags = *flags; | 
|  | } | 
|  |  | 
|  | return wdev; | 
|  | } | 
|  |  | 
|  | static int ieee80211_del_iface(struct wiphy *wiphy, struct wireless_dev *wdev) | 
|  | { | 
|  | ieee80211_if_remove(IEEE80211_WDEV_TO_SUB_IF(wdev)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_change_iface(struct wiphy *wiphy, | 
|  | struct net_device *dev, | 
|  | enum nl80211_iftype type, u32 *flags, | 
|  | struct vif_params *params) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | int ret; | 
|  |  | 
|  | ret = ieee80211_if_change_type(sdata, type); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (type == NL80211_IFTYPE_AP_VLAN && | 
|  | params && params->use_4addr == 0) | 
|  | RCU_INIT_POINTER(sdata->u.vlan.sta, NULL); | 
|  | else if (type == NL80211_IFTYPE_STATION && | 
|  | params && params->use_4addr >= 0) | 
|  | sdata->u.mgd.use_4addr = params->use_4addr; | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_MONITOR && flags) { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | if (ieee80211_sdata_running(sdata)) { | 
|  | u32 mask = MONITOR_FLAG_COOK_FRAMES | | 
|  | MONITOR_FLAG_ACTIVE; | 
|  |  | 
|  | /* | 
|  | * Prohibit MONITOR_FLAG_COOK_FRAMES and | 
|  | * MONITOR_FLAG_ACTIVE to be changed while the | 
|  | * interface is up. | 
|  | * Else we would need to add a lot of cruft | 
|  | * to update everything: | 
|  | *	cooked_mntrs, monitor and all fif_* counters | 
|  | *	reconfigure hardware | 
|  | */ | 
|  | if ((*flags & mask) != (sdata->u.mntr_flags & mask)) | 
|  | return -EBUSY; | 
|  |  | 
|  | ieee80211_adjust_monitor_flags(sdata, -1); | 
|  | sdata->u.mntr_flags = *flags; | 
|  | ieee80211_adjust_monitor_flags(sdata, 1); | 
|  |  | 
|  | ieee80211_configure_filter(local); | 
|  | } else { | 
|  | /* | 
|  | * Because the interface is down, ieee80211_do_stop | 
|  | * and ieee80211_do_open take care of "everything" | 
|  | * mentioned in the comment above. | 
|  | */ | 
|  | sdata->u.mntr_flags = *flags; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_start_p2p_device(struct wiphy *wiphy, | 
|  | struct wireless_dev *wdev) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&sdata->local->chanctx_mtx); | 
|  | ret = ieee80211_check_combinations(sdata, NULL, 0, 0); | 
|  | mutex_unlock(&sdata->local->chanctx_mtx); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return ieee80211_do_open(wdev, true); | 
|  | } | 
|  |  | 
|  | static void ieee80211_stop_p2p_device(struct wiphy *wiphy, | 
|  | struct wireless_dev *wdev) | 
|  | { | 
|  | ieee80211_sdata_stop(IEEE80211_WDEV_TO_SUB_IF(wdev)); | 
|  | } | 
|  |  | 
|  | static int ieee80211_set_noack_map(struct wiphy *wiphy, | 
|  | struct net_device *dev, | 
|  | u16 noack_map) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | sdata->noack_map = noack_map; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev, | 
|  | u8 key_idx, bool pairwise, const u8 *mac_addr, | 
|  | struct key_params *params) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sta_info *sta = NULL; | 
|  | const struct ieee80211_cipher_scheme *cs = NULL; | 
|  | struct ieee80211_key *key; | 
|  | int err; | 
|  |  | 
|  | if (!ieee80211_sdata_running(sdata)) | 
|  | return -ENETDOWN; | 
|  |  | 
|  | /* reject WEP and TKIP keys if WEP failed to initialize */ | 
|  | switch (params->cipher) { | 
|  | case WLAN_CIPHER_SUITE_WEP40: | 
|  | case WLAN_CIPHER_SUITE_TKIP: | 
|  | case WLAN_CIPHER_SUITE_WEP104: | 
|  | if (IS_ERR(local->wep_tx_tfm)) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | case WLAN_CIPHER_SUITE_CCMP_256: | 
|  | case WLAN_CIPHER_SUITE_AES_CMAC: | 
|  | case WLAN_CIPHER_SUITE_BIP_CMAC_256: | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_128: | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_256: | 
|  | case WLAN_CIPHER_SUITE_GCMP: | 
|  | case WLAN_CIPHER_SUITE_GCMP_256: | 
|  | break; | 
|  | default: | 
|  | cs = ieee80211_cs_get(local, params->cipher, sdata->vif.type); | 
|  | break; | 
|  | } | 
|  |  | 
|  | key = ieee80211_key_alloc(params->cipher, key_idx, params->key_len, | 
|  | params->key, params->seq_len, params->seq, | 
|  | cs); | 
|  | if (IS_ERR(key)) | 
|  | return PTR_ERR(key); | 
|  |  | 
|  | if (pairwise) | 
|  | key->conf.flags |= IEEE80211_KEY_FLAG_PAIRWISE; | 
|  |  | 
|  | mutex_lock(&local->sta_mtx); | 
|  |  | 
|  | if (mac_addr) { | 
|  | if (ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | sta = sta_info_get(sdata, mac_addr); | 
|  | else | 
|  | sta = sta_info_get_bss(sdata, mac_addr); | 
|  | /* | 
|  | * The ASSOC test makes sure the driver is ready to | 
|  | * receive the key. When wpa_supplicant has roamed | 
|  | * using FT, it attempts to set the key before | 
|  | * association has completed, this rejects that attempt | 
|  | * so it will set the key again after association. | 
|  | * | 
|  | * TODO: accept the key if we have a station entry and | 
|  | *       add it to the device after the station. | 
|  | */ | 
|  | if (!sta || !test_sta_flag(sta, WLAN_STA_ASSOC)) { | 
|  | ieee80211_key_free_unused(key); | 
|  | err = -ENOENT; | 
|  | goto out_unlock; | 
|  | } | 
|  | } | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | if (sdata->u.mgd.mfp != IEEE80211_MFP_DISABLED) | 
|  | key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT; | 
|  | break; | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | /* Keys without a station are used for TX only */ | 
|  | if (key->sta && test_sta_flag(key->sta, WLAN_STA_MFP)) | 
|  | key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT; | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | /* no MFP (yet) */ | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | if (sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE) | 
|  | key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT; | 
|  | break; | 
|  | #endif | 
|  | case NL80211_IFTYPE_WDS: | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | case NL80211_IFTYPE_P2P_DEVICE: | 
|  | case NL80211_IFTYPE_UNSPECIFIED: | 
|  | case NUM_NL80211_IFTYPES: | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | case NL80211_IFTYPE_OCB: | 
|  | /* shouldn't happen */ | 
|  | WARN_ON_ONCE(1); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (sta) | 
|  | sta->cipher_scheme = cs; | 
|  |  | 
|  | err = ieee80211_key_link(key, sdata, sta); | 
|  |  | 
|  | out_unlock: | 
|  | mutex_unlock(&local->sta_mtx); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev, | 
|  | u8 key_idx, bool pairwise, const u8 *mac_addr) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sta_info *sta; | 
|  | struct ieee80211_key *key = NULL; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&local->sta_mtx); | 
|  | mutex_lock(&local->key_mtx); | 
|  |  | 
|  | if (mac_addr) { | 
|  | ret = -ENOENT; | 
|  |  | 
|  | sta = sta_info_get_bss(sdata, mac_addr); | 
|  | if (!sta) | 
|  | goto out_unlock; | 
|  |  | 
|  | if (pairwise) | 
|  | key = key_mtx_dereference(local, sta->ptk[key_idx]); | 
|  | else | 
|  | key = key_mtx_dereference(local, sta->gtk[key_idx]); | 
|  | } else | 
|  | key = key_mtx_dereference(local, sdata->keys[key_idx]); | 
|  |  | 
|  | if (!key) { | 
|  | ret = -ENOENT; | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | ieee80211_key_free(key, true); | 
|  |  | 
|  | ret = 0; | 
|  | out_unlock: | 
|  | mutex_unlock(&local->key_mtx); | 
|  | mutex_unlock(&local->sta_mtx); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev, | 
|  | u8 key_idx, bool pairwise, const u8 *mac_addr, | 
|  | void *cookie, | 
|  | void (*callback)(void *cookie, | 
|  | struct key_params *params)) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct sta_info *sta = NULL; | 
|  | u8 seq[6] = {0}; | 
|  | struct key_params params; | 
|  | struct ieee80211_key *key = NULL; | 
|  | u64 pn64; | 
|  | u32 iv32; | 
|  | u16 iv16; | 
|  | int err = -ENOENT; | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | if (mac_addr) { | 
|  | sta = sta_info_get_bss(sdata, mac_addr); | 
|  | if (!sta) | 
|  | goto out; | 
|  |  | 
|  | if (pairwise && key_idx < NUM_DEFAULT_KEYS) | 
|  | key = rcu_dereference(sta->ptk[key_idx]); | 
|  | else if (!pairwise && | 
|  | key_idx < NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS) | 
|  | key = rcu_dereference(sta->gtk[key_idx]); | 
|  | } else | 
|  | key = rcu_dereference(sdata->keys[key_idx]); | 
|  |  | 
|  | if (!key) | 
|  | goto out; | 
|  |  | 
|  | memset(¶ms, 0, sizeof(params)); | 
|  |  | 
|  | params.cipher = key->conf.cipher; | 
|  |  | 
|  | switch (key->conf.cipher) { | 
|  | case WLAN_CIPHER_SUITE_TKIP: | 
|  | iv32 = key->u.tkip.tx.iv32; | 
|  | iv16 = key->u.tkip.tx.iv16; | 
|  |  | 
|  | if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) | 
|  | drv_get_tkip_seq(sdata->local, | 
|  | key->conf.hw_key_idx, | 
|  | &iv32, &iv16); | 
|  |  | 
|  | seq[0] = iv16 & 0xff; | 
|  | seq[1] = (iv16 >> 8) & 0xff; | 
|  | seq[2] = iv32 & 0xff; | 
|  | seq[3] = (iv32 >> 8) & 0xff; | 
|  | seq[4] = (iv32 >> 16) & 0xff; | 
|  | seq[5] = (iv32 >> 24) & 0xff; | 
|  | params.seq = seq; | 
|  | params.seq_len = 6; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | case WLAN_CIPHER_SUITE_CCMP_256: | 
|  | pn64 = atomic64_read(&key->u.ccmp.tx_pn); | 
|  | seq[0] = pn64; | 
|  | seq[1] = pn64 >> 8; | 
|  | seq[2] = pn64 >> 16; | 
|  | seq[3] = pn64 >> 24; | 
|  | seq[4] = pn64 >> 32; | 
|  | seq[5] = pn64 >> 40; | 
|  | params.seq = seq; | 
|  | params.seq_len = 6; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_AES_CMAC: | 
|  | case WLAN_CIPHER_SUITE_BIP_CMAC_256: | 
|  | pn64 = atomic64_read(&key->u.aes_cmac.tx_pn); | 
|  | seq[0] = pn64; | 
|  | seq[1] = pn64 >> 8; | 
|  | seq[2] = pn64 >> 16; | 
|  | seq[3] = pn64 >> 24; | 
|  | seq[4] = pn64 >> 32; | 
|  | seq[5] = pn64 >> 40; | 
|  | params.seq = seq; | 
|  | params.seq_len = 6; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_128: | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_256: | 
|  | pn64 = atomic64_read(&key->u.aes_gmac.tx_pn); | 
|  | seq[0] = pn64; | 
|  | seq[1] = pn64 >> 8; | 
|  | seq[2] = pn64 >> 16; | 
|  | seq[3] = pn64 >> 24; | 
|  | seq[4] = pn64 >> 32; | 
|  | seq[5] = pn64 >> 40; | 
|  | params.seq = seq; | 
|  | params.seq_len = 6; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_GCMP: | 
|  | case WLAN_CIPHER_SUITE_GCMP_256: | 
|  | pn64 = atomic64_read(&key->u.gcmp.tx_pn); | 
|  | seq[0] = pn64; | 
|  | seq[1] = pn64 >> 8; | 
|  | seq[2] = pn64 >> 16; | 
|  | seq[3] = pn64 >> 24; | 
|  | seq[4] = pn64 >> 32; | 
|  | seq[5] = pn64 >> 40; | 
|  | params.seq = seq; | 
|  | params.seq_len = 6; | 
|  | break; | 
|  | } | 
|  |  | 
|  | params.key = key->conf.key; | 
|  | params.key_len = key->conf.keylen; | 
|  |  | 
|  | callback(cookie, ¶ms); | 
|  | err = 0; | 
|  |  | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int ieee80211_config_default_key(struct wiphy *wiphy, | 
|  | struct net_device *dev, | 
|  | u8 key_idx, bool uni, | 
|  | bool multi) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | ieee80211_set_default_key(sdata, key_idx, uni, multi); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_config_default_mgmt_key(struct wiphy *wiphy, | 
|  | struct net_device *dev, | 
|  | u8 key_idx) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | ieee80211_set_default_mgmt_key(sdata, key_idx); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void sta_set_rate_info_tx(struct sta_info *sta, | 
|  | const struct ieee80211_tx_rate *rate, | 
|  | struct rate_info *rinfo) | 
|  | { | 
|  | rinfo->flags = 0; | 
|  | if (rate->flags & IEEE80211_TX_RC_MCS) { | 
|  | rinfo->flags |= RATE_INFO_FLAGS_MCS; | 
|  | rinfo->mcs = rate->idx; | 
|  | } else if (rate->flags & IEEE80211_TX_RC_VHT_MCS) { | 
|  | rinfo->flags |= RATE_INFO_FLAGS_VHT_MCS; | 
|  | rinfo->mcs = ieee80211_rate_get_vht_mcs(rate); | 
|  | rinfo->nss = ieee80211_rate_get_vht_nss(rate); | 
|  | } else { | 
|  | struct ieee80211_supported_band *sband; | 
|  | int shift = ieee80211_vif_get_shift(&sta->sdata->vif); | 
|  | u16 brate; | 
|  |  | 
|  | sband = sta->local->hw.wiphy->bands[ | 
|  | ieee80211_get_sdata_band(sta->sdata)]; | 
|  | brate = sband->bitrates[rate->idx].bitrate; | 
|  | rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift); | 
|  | } | 
|  | if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) | 
|  | rinfo->bw = RATE_INFO_BW_40; | 
|  | else if (rate->flags & IEEE80211_TX_RC_80_MHZ_WIDTH) | 
|  | rinfo->bw = RATE_INFO_BW_80; | 
|  | else if (rate->flags & IEEE80211_TX_RC_160_MHZ_WIDTH) | 
|  | rinfo->bw = RATE_INFO_BW_160; | 
|  | else | 
|  | rinfo->bw = RATE_INFO_BW_20; | 
|  | if (rate->flags & IEEE80211_TX_RC_SHORT_GI) | 
|  | rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI; | 
|  | } | 
|  |  | 
|  | void sta_set_rate_info_rx(struct sta_info *sta, struct rate_info *rinfo) | 
|  | { | 
|  | rinfo->flags = 0; | 
|  |  | 
|  | if (sta->last_rx_rate_flag & RX_FLAG_HT) { | 
|  | rinfo->flags |= RATE_INFO_FLAGS_MCS; | 
|  | rinfo->mcs = sta->last_rx_rate_idx; | 
|  | } else if (sta->last_rx_rate_flag & RX_FLAG_VHT) { | 
|  | rinfo->flags |= RATE_INFO_FLAGS_VHT_MCS; | 
|  | rinfo->nss = sta->last_rx_rate_vht_nss; | 
|  | rinfo->mcs = sta->last_rx_rate_idx; | 
|  | } else { | 
|  | struct ieee80211_supported_band *sband; | 
|  | int shift = ieee80211_vif_get_shift(&sta->sdata->vif); | 
|  | u16 brate; | 
|  |  | 
|  | sband = sta->local->hw.wiphy->bands[ | 
|  | ieee80211_get_sdata_band(sta->sdata)]; | 
|  | brate = sband->bitrates[sta->last_rx_rate_idx].bitrate; | 
|  | rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift); | 
|  | } | 
|  |  | 
|  | if (sta->last_rx_rate_flag & RX_FLAG_SHORT_GI) | 
|  | rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI; | 
|  |  | 
|  | if (sta->last_rx_rate_flag & RX_FLAG_5MHZ) | 
|  | rinfo->bw = RATE_INFO_BW_5; | 
|  | else if (sta->last_rx_rate_flag & RX_FLAG_10MHZ) | 
|  | rinfo->bw = RATE_INFO_BW_10; | 
|  | else if (sta->last_rx_rate_flag & RX_FLAG_40MHZ) | 
|  | rinfo->bw = RATE_INFO_BW_40; | 
|  | else if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_80MHZ) | 
|  | rinfo->bw = RATE_INFO_BW_80; | 
|  | else if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_160MHZ) | 
|  | rinfo->bw = RATE_INFO_BW_160; | 
|  | else | 
|  | rinfo->bw = RATE_INFO_BW_20; | 
|  | } | 
|  |  | 
|  | static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev, | 
|  | int idx, u8 *mac, struct station_info *sinfo) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sta_info *sta; | 
|  | int ret = -ENOENT; | 
|  |  | 
|  | mutex_lock(&local->sta_mtx); | 
|  |  | 
|  | sta = sta_info_get_by_idx(sdata, idx); | 
|  | if (sta) { | 
|  | ret = 0; | 
|  | memcpy(mac, sta->sta.addr, ETH_ALEN); | 
|  | sta_set_sinfo(sta, sinfo); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&local->sta_mtx); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ieee80211_dump_survey(struct wiphy *wiphy, struct net_device *dev, | 
|  | int idx, struct survey_info *survey) | 
|  | { | 
|  | struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | 
|  |  | 
|  | return drv_get_survey(local, idx, survey); | 
|  | } | 
|  |  | 
|  | static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev, | 
|  | const u8 *mac, struct station_info *sinfo) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sta_info *sta; | 
|  | int ret = -ENOENT; | 
|  |  | 
|  | mutex_lock(&local->sta_mtx); | 
|  |  | 
|  | sta = sta_info_get_bss(sdata, mac); | 
|  | if (sta) { | 
|  | ret = 0; | 
|  | sta_set_sinfo(sta, sinfo); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&local->sta_mtx); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ieee80211_set_monitor_channel(struct wiphy *wiphy, | 
|  | struct cfg80211_chan_def *chandef) | 
|  | { | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | int ret = 0; | 
|  |  | 
|  | if (cfg80211_chandef_identical(&local->monitor_chandef, chandef)) | 
|  | return 0; | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | if (local->use_chanctx) { | 
|  | sdata = rcu_dereference_protected( | 
|  | local->monitor_sdata, | 
|  | lockdep_is_held(&local->iflist_mtx)); | 
|  | if (sdata) { | 
|  | ieee80211_vif_release_channel(sdata); | 
|  | ret = ieee80211_vif_use_channel(sdata, chandef, | 
|  | IEEE80211_CHANCTX_EXCLUSIVE); | 
|  | } | 
|  | } else if (local->open_count == local->monitors) { | 
|  | local->_oper_chandef = *chandef; | 
|  | ieee80211_hw_config(local, 0); | 
|  | } | 
|  |  | 
|  | if (ret == 0) | 
|  | local->monitor_chandef = *chandef; | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ieee80211_set_probe_resp(struct ieee80211_sub_if_data *sdata, | 
|  | const u8 *resp, size_t resp_len, | 
|  | const struct ieee80211_csa_settings *csa) | 
|  | { | 
|  | struct probe_resp *new, *old; | 
|  |  | 
|  | if (!resp || !resp_len) | 
|  | return 1; | 
|  |  | 
|  | old = sdata_dereference(sdata->u.ap.probe_resp, sdata); | 
|  |  | 
|  | new = kzalloc(sizeof(struct probe_resp) + resp_len, GFP_KERNEL); | 
|  | if (!new) | 
|  | return -ENOMEM; | 
|  |  | 
|  | new->len = resp_len; | 
|  | memcpy(new->data, resp, resp_len); | 
|  |  | 
|  | if (csa) | 
|  | memcpy(new->csa_counter_offsets, csa->counter_offsets_presp, | 
|  | csa->n_counter_offsets_presp * | 
|  | sizeof(new->csa_counter_offsets[0])); | 
|  |  | 
|  | rcu_assign_pointer(sdata->u.ap.probe_resp, new); | 
|  | if (old) | 
|  | kfree_rcu(old, rcu_head); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_assign_beacon(struct ieee80211_sub_if_data *sdata, | 
|  | struct cfg80211_beacon_data *params, | 
|  | const struct ieee80211_csa_settings *csa) | 
|  | { | 
|  | struct beacon_data *new, *old; | 
|  | int new_head_len, new_tail_len; | 
|  | int size, err; | 
|  | u32 changed = BSS_CHANGED_BEACON; | 
|  |  | 
|  | old = sdata_dereference(sdata->u.ap.beacon, sdata); | 
|  |  | 
|  |  | 
|  | /* Need to have a beacon head if we don't have one yet */ | 
|  | if (!params->head && !old) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* new or old head? */ | 
|  | if (params->head) | 
|  | new_head_len = params->head_len; | 
|  | else | 
|  | new_head_len = old->head_len; | 
|  |  | 
|  | /* new or old tail? */ | 
|  | if (params->tail || !old) | 
|  | /* params->tail_len will be zero for !params->tail */ | 
|  | new_tail_len = params->tail_len; | 
|  | else | 
|  | new_tail_len = old->tail_len; | 
|  |  | 
|  | size = sizeof(*new) + new_head_len + new_tail_len; | 
|  |  | 
|  | new = kzalloc(size, GFP_KERNEL); | 
|  | if (!new) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* start filling the new info now */ | 
|  |  | 
|  | /* | 
|  | * pointers go into the block we allocated, | 
|  | * memory is | beacon_data | head | tail | | 
|  | */ | 
|  | new->head = ((u8 *) new) + sizeof(*new); | 
|  | new->tail = new->head + new_head_len; | 
|  | new->head_len = new_head_len; | 
|  | new->tail_len = new_tail_len; | 
|  |  | 
|  | if (csa) { | 
|  | new->csa_current_counter = csa->count; | 
|  | memcpy(new->csa_counter_offsets, csa->counter_offsets_beacon, | 
|  | csa->n_counter_offsets_beacon * | 
|  | sizeof(new->csa_counter_offsets[0])); | 
|  | } | 
|  |  | 
|  | /* copy in head */ | 
|  | if (params->head) | 
|  | memcpy(new->head, params->head, new_head_len); | 
|  | else | 
|  | memcpy(new->head, old->head, new_head_len); | 
|  |  | 
|  | /* copy in optional tail */ | 
|  | if (params->tail) | 
|  | memcpy(new->tail, params->tail, new_tail_len); | 
|  | else | 
|  | if (old) | 
|  | memcpy(new->tail, old->tail, new_tail_len); | 
|  |  | 
|  | err = ieee80211_set_probe_resp(sdata, params->probe_resp, | 
|  | params->probe_resp_len, csa); | 
|  | if (err < 0) | 
|  | return err; | 
|  | if (err == 0) | 
|  | changed |= BSS_CHANGED_AP_PROBE_RESP; | 
|  |  | 
|  | rcu_assign_pointer(sdata->u.ap.beacon, new); | 
|  |  | 
|  | if (old) | 
|  | kfree_rcu(old, rcu_head); | 
|  |  | 
|  | return changed; | 
|  | } | 
|  |  | 
|  | static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, | 
|  | struct cfg80211_ap_settings *params) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct beacon_data *old; | 
|  | struct ieee80211_sub_if_data *vlan; | 
|  | u32 changed = BSS_CHANGED_BEACON_INT | | 
|  | BSS_CHANGED_BEACON_ENABLED | | 
|  | BSS_CHANGED_BEACON | | 
|  | BSS_CHANGED_SSID | | 
|  | BSS_CHANGED_P2P_PS | | 
|  | BSS_CHANGED_TXPOWER; | 
|  | int err; | 
|  |  | 
|  | old = sdata_dereference(sdata->u.ap.beacon, sdata); | 
|  | if (old) | 
|  | return -EALREADY; | 
|  |  | 
|  | switch (params->smps_mode) { | 
|  | case NL80211_SMPS_OFF: | 
|  | sdata->smps_mode = IEEE80211_SMPS_OFF; | 
|  | break; | 
|  | case NL80211_SMPS_STATIC: | 
|  | sdata->smps_mode = IEEE80211_SMPS_STATIC; | 
|  | break; | 
|  | case NL80211_SMPS_DYNAMIC: | 
|  | sdata->smps_mode = IEEE80211_SMPS_DYNAMIC; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | sdata->needed_rx_chains = sdata->local->rx_chains; | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | err = ieee80211_vif_use_channel(sdata, ¶ms->chandef, | 
|  | IEEE80211_CHANCTX_SHARED); | 
|  | if (!err) | 
|  | ieee80211_vif_copy_chanctx_to_vlans(sdata, false); | 
|  | mutex_unlock(&local->mtx); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | /* | 
|  | * Apply control port protocol, this allows us to | 
|  | * not encrypt dynamic WEP control frames. | 
|  | */ | 
|  | sdata->control_port_protocol = params->crypto.control_port_ethertype; | 
|  | sdata->control_port_no_encrypt = params->crypto.control_port_no_encrypt; | 
|  | sdata->encrypt_headroom = ieee80211_cs_headroom(sdata->local, | 
|  | ¶ms->crypto, | 
|  | sdata->vif.type); | 
|  |  | 
|  | list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) { | 
|  | vlan->control_port_protocol = | 
|  | params->crypto.control_port_ethertype; | 
|  | vlan->control_port_no_encrypt = | 
|  | params->crypto.control_port_no_encrypt; | 
|  | vlan->encrypt_headroom = | 
|  | ieee80211_cs_headroom(sdata->local, | 
|  | ¶ms->crypto, | 
|  | vlan->vif.type); | 
|  | } | 
|  |  | 
|  | sdata->vif.bss_conf.beacon_int = params->beacon_interval; | 
|  | sdata->vif.bss_conf.dtim_period = params->dtim_period; | 
|  | sdata->vif.bss_conf.enable_beacon = true; | 
|  |  | 
|  | sdata->vif.bss_conf.ssid_len = params->ssid_len; | 
|  | if (params->ssid_len) | 
|  | memcpy(sdata->vif.bss_conf.ssid, params->ssid, | 
|  | params->ssid_len); | 
|  | sdata->vif.bss_conf.hidden_ssid = | 
|  | (params->hidden_ssid != NL80211_HIDDEN_SSID_NOT_IN_USE); | 
|  |  | 
|  | memset(&sdata->vif.bss_conf.p2p_noa_attr, 0, | 
|  | sizeof(sdata->vif.bss_conf.p2p_noa_attr)); | 
|  | sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow = | 
|  | params->p2p_ctwindow & IEEE80211_P2P_OPPPS_CTWINDOW_MASK; | 
|  | if (params->p2p_opp_ps) | 
|  | sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |= | 
|  | IEEE80211_P2P_OPPPS_ENABLE_BIT; | 
|  |  | 
|  | err = ieee80211_assign_beacon(sdata, ¶ms->beacon, NULL); | 
|  | if (err < 0) { | 
|  | ieee80211_vif_release_channel(sdata); | 
|  | return err; | 
|  | } | 
|  | changed |= err; | 
|  |  | 
|  | err = drv_start_ap(sdata->local, sdata); | 
|  | if (err) { | 
|  | old = sdata_dereference(sdata->u.ap.beacon, sdata); | 
|  |  | 
|  | if (old) | 
|  | kfree_rcu(old, rcu_head); | 
|  | RCU_INIT_POINTER(sdata->u.ap.beacon, NULL); | 
|  | ieee80211_vif_release_channel(sdata); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | ieee80211_recalc_dtim(local, sdata); | 
|  | ieee80211_bss_info_change_notify(sdata, changed); | 
|  |  | 
|  | netif_carrier_on(dev); | 
|  | list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) | 
|  | netif_carrier_on(vlan->dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev, | 
|  | struct cfg80211_beacon_data *params) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct beacon_data *old; | 
|  | int err; | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | sdata_assert_lock(sdata); | 
|  |  | 
|  | /* don't allow changing the beacon while CSA is in place - offset | 
|  | * of channel switch counter may change | 
|  | */ | 
|  | if (sdata->vif.csa_active) | 
|  | return -EBUSY; | 
|  |  | 
|  | old = sdata_dereference(sdata->u.ap.beacon, sdata); | 
|  | if (!old) | 
|  | return -ENOENT; | 
|  |  | 
|  | err = ieee80211_assign_beacon(sdata, params, NULL); | 
|  | if (err < 0) | 
|  | return err; | 
|  | ieee80211_bss_info_change_notify(sdata, err); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_sub_if_data *vlan; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct beacon_data *old_beacon; | 
|  | struct probe_resp *old_probe_resp; | 
|  | struct cfg80211_chan_def chandef; | 
|  |  | 
|  | sdata_assert_lock(sdata); | 
|  |  | 
|  | old_beacon = sdata_dereference(sdata->u.ap.beacon, sdata); | 
|  | if (!old_beacon) | 
|  | return -ENOENT; | 
|  | old_probe_resp = sdata_dereference(sdata->u.ap.probe_resp, sdata); | 
|  |  | 
|  | /* abort any running channel switch */ | 
|  | mutex_lock(&local->mtx); | 
|  | sdata->vif.csa_active = false; | 
|  | if (sdata->csa_block_tx) { | 
|  | ieee80211_wake_vif_queues(local, sdata, | 
|  | IEEE80211_QUEUE_STOP_REASON_CSA); | 
|  | sdata->csa_block_tx = false; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | kfree(sdata->u.ap.next_beacon); | 
|  | sdata->u.ap.next_beacon = NULL; | 
|  |  | 
|  | /* turn off carrier for this interface and dependent VLANs */ | 
|  | list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) | 
|  | netif_carrier_off(vlan->dev); | 
|  | netif_carrier_off(dev); | 
|  |  | 
|  | /* remove beacon and probe response */ | 
|  | RCU_INIT_POINTER(sdata->u.ap.beacon, NULL); | 
|  | RCU_INIT_POINTER(sdata->u.ap.probe_resp, NULL); | 
|  | kfree_rcu(old_beacon, rcu_head); | 
|  | if (old_probe_resp) | 
|  | kfree_rcu(old_probe_resp, rcu_head); | 
|  | sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF; | 
|  |  | 
|  | __sta_info_flush(sdata, true); | 
|  | ieee80211_free_keys(sdata, true); | 
|  |  | 
|  | sdata->vif.bss_conf.enable_beacon = false; | 
|  | sdata->vif.bss_conf.ssid_len = 0; | 
|  | clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); | 
|  | ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); | 
|  |  | 
|  | if (sdata->wdev.cac_started) { | 
|  | chandef = sdata->vif.bss_conf.chandef; | 
|  | cancel_delayed_work_sync(&sdata->dfs_cac_timer_work); | 
|  | cfg80211_cac_event(sdata->dev, &chandef, | 
|  | NL80211_RADAR_CAC_ABORTED, | 
|  | GFP_KERNEL); | 
|  | } | 
|  |  | 
|  | drv_stop_ap(sdata->local, sdata); | 
|  |  | 
|  | /* free all potentially still buffered bcast frames */ | 
|  | local->total_ps_buffered -= skb_queue_len(&sdata->u.ap.ps.bc_buf); | 
|  | skb_queue_purge(&sdata->u.ap.ps.bc_buf); | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | ieee80211_vif_copy_chanctx_to_vlans(sdata, true); | 
|  | ieee80211_vif_release_channel(sdata); | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Layer 2 Update frame (802.2 Type 1 LLC XID Update response) */ | 
|  | struct iapp_layer2_update { | 
|  | u8 da[ETH_ALEN];	/* broadcast */ | 
|  | u8 sa[ETH_ALEN];	/* STA addr */ | 
|  | __be16 len;		/* 6 */ | 
|  | u8 dsap;		/* 0 */ | 
|  | u8 ssap;		/* 0 */ | 
|  | u8 control; | 
|  | u8 xid_info[3]; | 
|  | } __packed; | 
|  |  | 
|  | static void ieee80211_send_layer2_update(struct sta_info *sta) | 
|  | { | 
|  | struct iapp_layer2_update *msg; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | /* Send Level 2 Update Frame to update forwarding tables in layer 2 | 
|  | * bridge devices */ | 
|  |  | 
|  | skb = dev_alloc_skb(sizeof(*msg)); | 
|  | if (!skb) | 
|  | return; | 
|  | msg = (struct iapp_layer2_update *)skb_put(skb, sizeof(*msg)); | 
|  |  | 
|  | /* 802.2 Type 1 Logical Link Control (LLC) Exchange Identifier (XID) | 
|  | * Update response frame; IEEE Std 802.2-1998, 5.4.1.2.1 */ | 
|  |  | 
|  | eth_broadcast_addr(msg->da); | 
|  | memcpy(msg->sa, sta->sta.addr, ETH_ALEN); | 
|  | msg->len = htons(6); | 
|  | msg->dsap = 0; | 
|  | msg->ssap = 0x01;	/* NULL LSAP, CR Bit: Response */ | 
|  | msg->control = 0xaf;	/* XID response lsb.1111F101. | 
|  | * F=0 (no poll command; unsolicited frame) */ | 
|  | msg->xid_info[0] = 0x81;	/* XID format identifier */ | 
|  | msg->xid_info[1] = 1;	/* LLC types/classes: Type 1 LLC */ | 
|  | msg->xid_info[2] = 0;	/* XID sender's receive window size (RW) */ | 
|  |  | 
|  | skb->dev = sta->sdata->dev; | 
|  | skb->protocol = eth_type_trans(skb, sta->sdata->dev); | 
|  | memset(skb->cb, 0, sizeof(skb->cb)); | 
|  | netif_rx_ni(skb); | 
|  | } | 
|  |  | 
|  | static int sta_apply_auth_flags(struct ieee80211_local *local, | 
|  | struct sta_info *sta, | 
|  | u32 mask, u32 set) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) && | 
|  | set & BIT(NL80211_STA_FLAG_AUTHENTICATED) && | 
|  | !test_sta_flag(sta, WLAN_STA_AUTH)) { | 
|  | ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) && | 
|  | set & BIT(NL80211_STA_FLAG_ASSOCIATED) && | 
|  | !test_sta_flag(sta, WLAN_STA_ASSOC)) { | 
|  | /* | 
|  | * When peer becomes associated, init rate control as | 
|  | * well. Some drivers require rate control initialized | 
|  | * before drv_sta_state() is called. | 
|  | */ | 
|  | if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) | 
|  | rate_control_rate_init(sta); | 
|  |  | 
|  | ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) { | 
|  | if (set & BIT(NL80211_STA_FLAG_AUTHORIZED)) | 
|  | ret = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); | 
|  | else if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) | 
|  | ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); | 
|  | else | 
|  | ret = 0; | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) && | 
|  | !(set & BIT(NL80211_STA_FLAG_ASSOCIATED)) && | 
|  | test_sta_flag(sta, WLAN_STA_ASSOC)) { | 
|  | ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) && | 
|  | !(set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) && | 
|  | test_sta_flag(sta, WLAN_STA_AUTH)) { | 
|  | ret = sta_info_move_state(sta, IEEE80211_STA_NONE); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sta_apply_parameters(struct ieee80211_local *local, | 
|  | struct sta_info *sta, | 
|  | struct station_parameters *params) | 
|  | { | 
|  | int ret = 0; | 
|  | struct ieee80211_supported_band *sband; | 
|  | struct ieee80211_sub_if_data *sdata = sta->sdata; | 
|  | enum ieee80211_band band = ieee80211_get_sdata_band(sdata); | 
|  | u32 mask, set; | 
|  |  | 
|  | sband = local->hw.wiphy->bands[band]; | 
|  |  | 
|  | mask = params->sta_flags_mask; | 
|  | set = params->sta_flags_set; | 
|  |  | 
|  | if (ieee80211_vif_is_mesh(&sdata->vif)) { | 
|  | /* | 
|  | * In mesh mode, ASSOCIATED isn't part of the nl80211 | 
|  | * API but must follow AUTHENTICATED for driver state. | 
|  | */ | 
|  | if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED)) | 
|  | mask |= BIT(NL80211_STA_FLAG_ASSOCIATED); | 
|  | if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) | 
|  | set |= BIT(NL80211_STA_FLAG_ASSOCIATED); | 
|  | } else if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { | 
|  | /* | 
|  | * TDLS -- everything follows authorized, but | 
|  | * only becoming authorized is possible, not | 
|  | * going back | 
|  | */ | 
|  | if (set & BIT(NL80211_STA_FLAG_AUTHORIZED)) { | 
|  | set |= BIT(NL80211_STA_FLAG_AUTHENTICATED) | | 
|  | BIT(NL80211_STA_FLAG_ASSOCIATED); | 
|  | mask |= BIT(NL80211_STA_FLAG_AUTHENTICATED) | | 
|  | BIT(NL80211_STA_FLAG_ASSOCIATED); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (mask & BIT(NL80211_STA_FLAG_WME) && | 
|  | local->hw.queues >= IEEE80211_NUM_ACS) | 
|  | sta->sta.wme = set & BIT(NL80211_STA_FLAG_WME); | 
|  |  | 
|  | /* auth flags will be set later for TDLS stations */ | 
|  | if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { | 
|  | ret = sta_apply_auth_flags(local, sta, mask, set); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (mask & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) { | 
|  | if (set & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) | 
|  | set_sta_flag(sta, WLAN_STA_SHORT_PREAMBLE); | 
|  | else | 
|  | clear_sta_flag(sta, WLAN_STA_SHORT_PREAMBLE); | 
|  | } | 
|  |  | 
|  | if (mask & BIT(NL80211_STA_FLAG_MFP)) { | 
|  | sta->sta.mfp = !!(set & BIT(NL80211_STA_FLAG_MFP)); | 
|  | if (set & BIT(NL80211_STA_FLAG_MFP)) | 
|  | set_sta_flag(sta, WLAN_STA_MFP); | 
|  | else | 
|  | clear_sta_flag(sta, WLAN_STA_MFP); | 
|  | } | 
|  |  | 
|  | if (mask & BIT(NL80211_STA_FLAG_TDLS_PEER)) { | 
|  | if (set & BIT(NL80211_STA_FLAG_TDLS_PEER)) | 
|  | set_sta_flag(sta, WLAN_STA_TDLS_PEER); | 
|  | else | 
|  | clear_sta_flag(sta, WLAN_STA_TDLS_PEER); | 
|  | } | 
|  |  | 
|  | /* mark TDLS channel switch support, if the AP allows it */ | 
|  | if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) && | 
|  | !sdata->u.mgd.tdls_chan_switch_prohibited && | 
|  | params->ext_capab_len >= 4 && | 
|  | params->ext_capab[3] & WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH) | 
|  | set_sta_flag(sta, WLAN_STA_TDLS_CHAN_SWITCH); | 
|  |  | 
|  | if (params->sta_modify_mask & STATION_PARAM_APPLY_UAPSD) { | 
|  | sta->sta.uapsd_queues = params->uapsd_queues; | 
|  | sta->sta.max_sp = params->max_sp; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * cfg80211 validates this (1-2007) and allows setting the AID | 
|  | * only when creating a new station entry | 
|  | */ | 
|  | if (params->aid) | 
|  | sta->sta.aid = params->aid; | 
|  |  | 
|  | /* | 
|  | * Some of the following updates would be racy if called on an | 
|  | * existing station, via ieee80211_change_station(). However, | 
|  | * all such changes are rejected by cfg80211 except for updates | 
|  | * changing the supported rates on an existing but not yet used | 
|  | * TDLS peer. | 
|  | */ | 
|  |  | 
|  | if (params->listen_interval >= 0) | 
|  | sta->listen_interval = params->listen_interval; | 
|  |  | 
|  | if (params->supported_rates) { | 
|  | ieee80211_parse_bitrates(&sdata->vif.bss_conf.chandef, | 
|  | sband, params->supported_rates, | 
|  | params->supported_rates_len, | 
|  | &sta->sta.supp_rates[band]); | 
|  | } | 
|  |  | 
|  | if (params->ht_capa) | 
|  | ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, | 
|  | params->ht_capa, sta); | 
|  |  | 
|  | if (params->vht_capa) | 
|  | ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, | 
|  | params->vht_capa, sta); | 
|  |  | 
|  | if (params->opmode_notif_used) { | 
|  | /* returned value is only needed for rc update, but the | 
|  | * rc isn't initialized here yet, so ignore it | 
|  | */ | 
|  | __ieee80211_vht_handle_opmode(sdata, sta, | 
|  | params->opmode_notif, | 
|  | band, false); | 
|  | } | 
|  |  | 
|  | if (ieee80211_vif_is_mesh(&sdata->vif)) { | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | u32 changed = 0; | 
|  |  | 
|  | if (params->sta_modify_mask & STATION_PARAM_APPLY_PLINK_STATE) { | 
|  | switch (params->plink_state) { | 
|  | case NL80211_PLINK_ESTAB: | 
|  | if (sta->plink_state != NL80211_PLINK_ESTAB) | 
|  | changed = mesh_plink_inc_estab_count( | 
|  | sdata); | 
|  | sta->plink_state = params->plink_state; | 
|  |  | 
|  | ieee80211_mps_sta_status_update(sta); | 
|  | changed |= ieee80211_mps_set_sta_local_pm(sta, | 
|  | sdata->u.mesh.mshcfg.power_mode); | 
|  | break; | 
|  | case NL80211_PLINK_LISTEN: | 
|  | case NL80211_PLINK_BLOCKED: | 
|  | case NL80211_PLINK_OPN_SNT: | 
|  | case NL80211_PLINK_OPN_RCVD: | 
|  | case NL80211_PLINK_CNF_RCVD: | 
|  | case NL80211_PLINK_HOLDING: | 
|  | if (sta->plink_state == NL80211_PLINK_ESTAB) | 
|  | changed = mesh_plink_dec_estab_count( | 
|  | sdata); | 
|  | sta->plink_state = params->plink_state; | 
|  |  | 
|  | ieee80211_mps_sta_status_update(sta); | 
|  | changed |= ieee80211_mps_set_sta_local_pm(sta, | 
|  | NL80211_MESH_POWER_UNKNOWN); | 
|  | break; | 
|  | default: | 
|  | /*  nothing  */ | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | switch (params->plink_action) { | 
|  | case NL80211_PLINK_ACTION_NO_ACTION: | 
|  | /* nothing */ | 
|  | break; | 
|  | case NL80211_PLINK_ACTION_OPEN: | 
|  | changed |= mesh_plink_open(sta); | 
|  | break; | 
|  | case NL80211_PLINK_ACTION_BLOCK: | 
|  | changed |= mesh_plink_block(sta); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (params->local_pm) | 
|  | changed |= | 
|  | ieee80211_mps_set_sta_local_pm(sta, | 
|  | params->local_pm); | 
|  | ieee80211_mbss_info_change_notify(sdata, changed); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | /* set the STA state after all sta info from usermode has been set */ | 
|  | if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { | 
|  | ret = sta_apply_auth_flags(local, sta, mask, set); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, | 
|  | const u8 *mac, | 
|  | struct station_parameters *params) | 
|  | { | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  | struct sta_info *sta; | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | int err; | 
|  | int layer2_update; | 
|  |  | 
|  | if (params->vlan) { | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); | 
|  |  | 
|  | if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN && | 
|  | sdata->vif.type != NL80211_IFTYPE_AP) | 
|  | return -EINVAL; | 
|  | } else | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | if (ether_addr_equal(mac, sdata->vif.addr)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (is_multicast_ether_addr(mac)) | 
|  | return -EINVAL; | 
|  |  | 
|  | sta = sta_info_alloc(sdata, mac, GFP_KERNEL); | 
|  | if (!sta) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* | 
|  | * defaults -- if userspace wants something else we'll | 
|  | * change it accordingly in sta_apply_parameters() | 
|  | */ | 
|  | if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))) { | 
|  | sta_info_pre_move_state(sta, IEEE80211_STA_AUTH); | 
|  | sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC); | 
|  | } else { | 
|  | sta->sta.tdls = true; | 
|  | } | 
|  |  | 
|  | err = sta_apply_parameters(local, sta, params); | 
|  | if (err) { | 
|  | sta_info_free(local, sta); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * for TDLS, rate control should be initialized only when | 
|  | * rates are known and station is marked authorized | 
|  | */ | 
|  | if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) | 
|  | rate_control_rate_init(sta); | 
|  |  | 
|  | layer2_update = sdata->vif.type == NL80211_IFTYPE_AP_VLAN || | 
|  | sdata->vif.type == NL80211_IFTYPE_AP; | 
|  |  | 
|  | err = sta_info_insert_rcu(sta); | 
|  | if (err) { | 
|  | rcu_read_unlock(); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if (layer2_update) | 
|  | ieee80211_send_layer2_update(sta); | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev, | 
|  | struct station_del_parameters *params) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | if (params->mac) | 
|  | return sta_info_destroy_addr_bss(sdata, params->mac); | 
|  |  | 
|  | sta_info_flush(sdata); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_change_station(struct wiphy *wiphy, | 
|  | struct net_device *dev, const u8 *mac, | 
|  | struct station_parameters *params) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  | struct sta_info *sta; | 
|  | struct ieee80211_sub_if_data *vlansdata; | 
|  | enum cfg80211_station_type statype; | 
|  | int err; | 
|  |  | 
|  | mutex_lock(&local->sta_mtx); | 
|  |  | 
|  | sta = sta_info_get_bss(sdata, mac); | 
|  | if (!sta) { | 
|  | err = -ENOENT; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | if (sdata->u.mesh.user_mpm) | 
|  | statype = CFG80211_STA_MESH_PEER_USER; | 
|  | else | 
|  | statype = CFG80211_STA_MESH_PEER_KERNEL; | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | statype = CFG80211_STA_IBSS; | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { | 
|  | statype = CFG80211_STA_AP_STA; | 
|  | break; | 
|  | } | 
|  | if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) | 
|  | statype = CFG80211_STA_TDLS_PEER_ACTIVE; | 
|  | else | 
|  | statype = CFG80211_STA_TDLS_PEER_SETUP; | 
|  | break; | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | statype = CFG80211_STA_AP_CLIENT; | 
|  | break; | 
|  | default: | 
|  | err = -EOPNOTSUPP; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | err = cfg80211_check_station_change(wiphy, params, statype); | 
|  | if (err) | 
|  | goto out_err; | 
|  |  | 
|  | if (params->vlan && params->vlan != sta->sdata->dev) { | 
|  | bool prev_4addr = false; | 
|  | bool new_4addr = false; | 
|  |  | 
|  | vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); | 
|  |  | 
|  | if (params->vlan->ieee80211_ptr->use_4addr) { | 
|  | if (vlansdata->u.vlan.sta) { | 
|  | err = -EBUSY; | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | rcu_assign_pointer(vlansdata->u.vlan.sta, sta); | 
|  | new_4addr = true; | 
|  | } | 
|  |  | 
|  | if (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN && | 
|  | sta->sdata->u.vlan.sta) { | 
|  | RCU_INIT_POINTER(sta->sdata->u.vlan.sta, NULL); | 
|  | prev_4addr = true; | 
|  | } | 
|  |  | 
|  | sta->sdata = vlansdata; | 
|  |  | 
|  | if (sta->sta_state == IEEE80211_STA_AUTHORIZED && | 
|  | prev_4addr != new_4addr) { | 
|  | if (new_4addr) | 
|  | atomic_dec(&sta->sdata->bss->num_mcast_sta); | 
|  | else | 
|  | atomic_inc(&sta->sdata->bss->num_mcast_sta); | 
|  | } | 
|  |  | 
|  | ieee80211_send_layer2_update(sta); | 
|  | } | 
|  |  | 
|  | err = sta_apply_parameters(local, sta, params); | 
|  | if (err) | 
|  | goto out_err; | 
|  |  | 
|  | mutex_unlock(&local->sta_mtx); | 
|  |  | 
|  | if ((sdata->vif.type == NL80211_IFTYPE_AP || | 
|  | sdata->vif.type == NL80211_IFTYPE_AP_VLAN) && | 
|  | sta->known_smps_mode != sta->sdata->bss->req_smps && | 
|  | test_sta_flag(sta, WLAN_STA_AUTHORIZED) && | 
|  | sta_info_tx_streams(sta) != 1) { | 
|  | ht_dbg(sta->sdata, | 
|  | "%pM just authorized and MIMO capable - update SMPS\n", | 
|  | sta->sta.addr); | 
|  | ieee80211_send_smps_action(sta->sdata, | 
|  | sta->sdata->bss->req_smps, | 
|  | sta->sta.addr, | 
|  | sta->sdata->vif.bss_conf.bssid); | 
|  | } | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_STATION && | 
|  | params->sta_flags_mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) { | 
|  | ieee80211_recalc_ps(local, -1); | 
|  | ieee80211_recalc_ps_vif(sdata); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | out_err: | 
|  | mutex_unlock(&local->sta_mtx); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev, | 
|  | const u8 *dst, const u8 *next_hop) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct mesh_path *mpath; | 
|  | struct sta_info *sta; | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | sta = sta_info_get(sdata, next_hop); | 
|  | if (!sta) { | 
|  | rcu_read_unlock(); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | mpath = mesh_path_add(sdata, dst); | 
|  | if (IS_ERR(mpath)) { | 
|  | rcu_read_unlock(); | 
|  | return PTR_ERR(mpath); | 
|  | } | 
|  |  | 
|  | mesh_path_fix_nexthop(mpath, sta); | 
|  |  | 
|  | rcu_read_unlock(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_del_mpath(struct wiphy *wiphy, struct net_device *dev, | 
|  | const u8 *dst) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | if (dst) | 
|  | return mesh_path_del(sdata, dst); | 
|  |  | 
|  | mesh_path_flush_by_iface(sdata); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_change_mpath(struct wiphy *wiphy, struct net_device *dev, | 
|  | const u8 *dst, const u8 *next_hop) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct mesh_path *mpath; | 
|  | struct sta_info *sta; | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | sta = sta_info_get(sdata, next_hop); | 
|  | if (!sta) { | 
|  | rcu_read_unlock(); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | mpath = mesh_path_lookup(sdata, dst); | 
|  | if (!mpath) { | 
|  | rcu_read_unlock(); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | mesh_path_fix_nexthop(mpath, sta); | 
|  |  | 
|  | rcu_read_unlock(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop, | 
|  | struct mpath_info *pinfo) | 
|  | { | 
|  | struct sta_info *next_hop_sta = rcu_dereference(mpath->next_hop); | 
|  |  | 
|  | if (next_hop_sta) | 
|  | memcpy(next_hop, next_hop_sta->sta.addr, ETH_ALEN); | 
|  | else | 
|  | eth_zero_addr(next_hop); | 
|  |  | 
|  | memset(pinfo, 0, sizeof(*pinfo)); | 
|  |  | 
|  | pinfo->generation = mesh_paths_generation; | 
|  |  | 
|  | pinfo->filled = MPATH_INFO_FRAME_QLEN | | 
|  | MPATH_INFO_SN | | 
|  | MPATH_INFO_METRIC | | 
|  | MPATH_INFO_EXPTIME | | 
|  | MPATH_INFO_DISCOVERY_TIMEOUT | | 
|  | MPATH_INFO_DISCOVERY_RETRIES | | 
|  | MPATH_INFO_FLAGS; | 
|  |  | 
|  | pinfo->frame_qlen = mpath->frame_queue.qlen; | 
|  | pinfo->sn = mpath->sn; | 
|  | pinfo->metric = mpath->metric; | 
|  | if (time_before(jiffies, mpath->exp_time)) | 
|  | pinfo->exptime = jiffies_to_msecs(mpath->exp_time - jiffies); | 
|  | pinfo->discovery_timeout = | 
|  | jiffies_to_msecs(mpath->discovery_timeout); | 
|  | pinfo->discovery_retries = mpath->discovery_retries; | 
|  | if (mpath->flags & MESH_PATH_ACTIVE) | 
|  | pinfo->flags |= NL80211_MPATH_FLAG_ACTIVE; | 
|  | if (mpath->flags & MESH_PATH_RESOLVING) | 
|  | pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING; | 
|  | if (mpath->flags & MESH_PATH_SN_VALID) | 
|  | pinfo->flags |= NL80211_MPATH_FLAG_SN_VALID; | 
|  | if (mpath->flags & MESH_PATH_FIXED) | 
|  | pinfo->flags |= NL80211_MPATH_FLAG_FIXED; | 
|  | if (mpath->flags & MESH_PATH_RESOLVED) | 
|  | pinfo->flags |= NL80211_MPATH_FLAG_RESOLVED; | 
|  | } | 
|  |  | 
|  | static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev, | 
|  | u8 *dst, u8 *next_hop, struct mpath_info *pinfo) | 
|  |  | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct mesh_path *mpath; | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | mpath = mesh_path_lookup(sdata, dst); | 
|  | if (!mpath) { | 
|  | rcu_read_unlock(); | 
|  | return -ENOENT; | 
|  | } | 
|  | memcpy(dst, mpath->dst, ETH_ALEN); | 
|  | mpath_set_pinfo(mpath, next_hop, pinfo); | 
|  | rcu_read_unlock(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev, | 
|  | int idx, u8 *dst, u8 *next_hop, | 
|  | struct mpath_info *pinfo) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct mesh_path *mpath; | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | mpath = mesh_path_lookup_by_idx(sdata, idx); | 
|  | if (!mpath) { | 
|  | rcu_read_unlock(); | 
|  | return -ENOENT; | 
|  | } | 
|  | memcpy(dst, mpath->dst, ETH_ALEN); | 
|  | mpath_set_pinfo(mpath, next_hop, pinfo); | 
|  | rcu_read_unlock(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void mpp_set_pinfo(struct mesh_path *mpath, u8 *mpp, | 
|  | struct mpath_info *pinfo) | 
|  | { | 
|  | memset(pinfo, 0, sizeof(*pinfo)); | 
|  | memcpy(mpp, mpath->mpp, ETH_ALEN); | 
|  |  | 
|  | pinfo->generation = mpp_paths_generation; | 
|  | } | 
|  |  | 
|  | static int ieee80211_get_mpp(struct wiphy *wiphy, struct net_device *dev, | 
|  | u8 *dst, u8 *mpp, struct mpath_info *pinfo) | 
|  |  | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct mesh_path *mpath; | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | mpath = mpp_path_lookup(sdata, dst); | 
|  | if (!mpath) { | 
|  | rcu_read_unlock(); | 
|  | return -ENOENT; | 
|  | } | 
|  | memcpy(dst, mpath->dst, ETH_ALEN); | 
|  | mpp_set_pinfo(mpath, mpp, pinfo); | 
|  | rcu_read_unlock(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_dump_mpp(struct wiphy *wiphy, struct net_device *dev, | 
|  | int idx, u8 *dst, u8 *mpp, | 
|  | struct mpath_info *pinfo) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct mesh_path *mpath; | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | mpath = mpp_path_lookup_by_idx(sdata, idx); | 
|  | if (!mpath) { | 
|  | rcu_read_unlock(); | 
|  | return -ENOENT; | 
|  | } | 
|  | memcpy(dst, mpath->dst, ETH_ALEN); | 
|  | mpp_set_pinfo(mpath, mpp, pinfo); | 
|  | rcu_read_unlock(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_get_mesh_config(struct wiphy *wiphy, | 
|  | struct net_device *dev, | 
|  | struct mesh_config *conf) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | memcpy(conf, &(sdata->u.mesh.mshcfg), sizeof(struct mesh_config)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask) | 
|  | { | 
|  | return (mask >> (parm-1)) & 0x1; | 
|  | } | 
|  |  | 
|  | static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh, | 
|  | const struct mesh_setup *setup) | 
|  | { | 
|  | u8 *new_ie; | 
|  | const u8 *old_ie; | 
|  | struct ieee80211_sub_if_data *sdata = container_of(ifmsh, | 
|  | struct ieee80211_sub_if_data, u.mesh); | 
|  |  | 
|  | /* allocate information elements */ | 
|  | new_ie = NULL; | 
|  | old_ie = ifmsh->ie; | 
|  |  | 
|  | if (setup->ie_len) { | 
|  | new_ie = kmemdup(setup->ie, setup->ie_len, | 
|  | GFP_KERNEL); | 
|  | if (!new_ie) | 
|  | return -ENOMEM; | 
|  | } | 
|  | ifmsh->ie_len = setup->ie_len; | 
|  | ifmsh->ie = new_ie; | 
|  | kfree(old_ie); | 
|  |  | 
|  | /* now copy the rest of the setup parameters */ | 
|  | ifmsh->mesh_id_len = setup->mesh_id_len; | 
|  | memcpy(ifmsh->mesh_id, setup->mesh_id, ifmsh->mesh_id_len); | 
|  | ifmsh->mesh_sp_id = setup->sync_method; | 
|  | ifmsh->mesh_pp_id = setup->path_sel_proto; | 
|  | ifmsh->mesh_pm_id = setup->path_metric; | 
|  | ifmsh->user_mpm = setup->user_mpm; | 
|  | ifmsh->mesh_auth_id = setup->auth_id; | 
|  | ifmsh->security = IEEE80211_MESH_SEC_NONE; | 
|  | if (setup->is_authenticated) | 
|  | ifmsh->security |= IEEE80211_MESH_SEC_AUTHED; | 
|  | if (setup->is_secure) | 
|  | ifmsh->security |= IEEE80211_MESH_SEC_SECURED; | 
|  |  | 
|  | /* mcast rate setting in Mesh Node */ | 
|  | memcpy(sdata->vif.bss_conf.mcast_rate, setup->mcast_rate, | 
|  | sizeof(setup->mcast_rate)); | 
|  | sdata->vif.bss_conf.basic_rates = setup->basic_rates; | 
|  |  | 
|  | sdata->vif.bss_conf.beacon_int = setup->beacon_interval; | 
|  | sdata->vif.bss_conf.dtim_period = setup->dtim_period; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_update_mesh_config(struct wiphy *wiphy, | 
|  | struct net_device *dev, u32 mask, | 
|  | const struct mesh_config *nconf) | 
|  | { | 
|  | struct mesh_config *conf; | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct ieee80211_if_mesh *ifmsh; | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | ifmsh = &sdata->u.mesh; | 
|  |  | 
|  | /* Set the config options which we are interested in setting */ | 
|  | conf = &(sdata->u.mesh.mshcfg); | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_RETRY_TIMEOUT, mask)) | 
|  | conf->dot11MeshRetryTimeout = nconf->dot11MeshRetryTimeout; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_CONFIRM_TIMEOUT, mask)) | 
|  | conf->dot11MeshConfirmTimeout = nconf->dot11MeshConfirmTimeout; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_HOLDING_TIMEOUT, mask)) | 
|  | conf->dot11MeshHoldingTimeout = nconf->dot11MeshHoldingTimeout; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_MAX_PEER_LINKS, mask)) | 
|  | conf->dot11MeshMaxPeerLinks = nconf->dot11MeshMaxPeerLinks; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_MAX_RETRIES, mask)) | 
|  | conf->dot11MeshMaxRetries = nconf->dot11MeshMaxRetries; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_TTL, mask)) | 
|  | conf->dot11MeshTTL = nconf->dot11MeshTTL; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_ELEMENT_TTL, mask)) | 
|  | conf->element_ttl = nconf->element_ttl; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_AUTO_OPEN_PLINKS, mask)) { | 
|  | if (ifmsh->user_mpm) | 
|  | return -EBUSY; | 
|  | conf->auto_open_plinks = nconf->auto_open_plinks; | 
|  | } | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, mask)) | 
|  | conf->dot11MeshNbrOffsetMaxNeighbor = | 
|  | nconf->dot11MeshNbrOffsetMaxNeighbor; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, mask)) | 
|  | conf->dot11MeshHWMPmaxPREQretries = | 
|  | nconf->dot11MeshHWMPmaxPREQretries; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_PATH_REFRESH_TIME, mask)) | 
|  | conf->path_refresh_time = nconf->path_refresh_time; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, mask)) | 
|  | conf->min_discovery_timeout = nconf->min_discovery_timeout; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, mask)) | 
|  | conf->dot11MeshHWMPactivePathTimeout = | 
|  | nconf->dot11MeshHWMPactivePathTimeout; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, mask)) | 
|  | conf->dot11MeshHWMPpreqMinInterval = | 
|  | nconf->dot11MeshHWMPpreqMinInterval; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, mask)) | 
|  | conf->dot11MeshHWMPperrMinInterval = | 
|  | nconf->dot11MeshHWMPperrMinInterval; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, | 
|  | mask)) | 
|  | conf->dot11MeshHWMPnetDiameterTraversalTime = | 
|  | nconf->dot11MeshHWMPnetDiameterTraversalTime; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOTMODE, mask)) { | 
|  | conf->dot11MeshHWMPRootMode = nconf->dot11MeshHWMPRootMode; | 
|  | ieee80211_mesh_root_setup(ifmsh); | 
|  | } | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_GATE_ANNOUNCEMENTS, mask)) { | 
|  | /* our current gate announcement implementation rides on root | 
|  | * announcements, so require this ifmsh to also be a root node | 
|  | * */ | 
|  | if (nconf->dot11MeshGateAnnouncementProtocol && | 
|  | !(conf->dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT)) { | 
|  | conf->dot11MeshHWMPRootMode = IEEE80211_PROACTIVE_RANN; | 
|  | ieee80211_mesh_root_setup(ifmsh); | 
|  | } | 
|  | conf->dot11MeshGateAnnouncementProtocol = | 
|  | nconf->dot11MeshGateAnnouncementProtocol; | 
|  | } | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_RANN_INTERVAL, mask)) | 
|  | conf->dot11MeshHWMPRannInterval = | 
|  | nconf->dot11MeshHWMPRannInterval; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_FORWARDING, mask)) | 
|  | conf->dot11MeshForwarding = nconf->dot11MeshForwarding; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_RSSI_THRESHOLD, mask)) { | 
|  | /* our RSSI threshold implementation is supported only for | 
|  | * devices that report signal in dBm. | 
|  | */ | 
|  | if (!(sdata->local->hw.flags & IEEE80211_HW_SIGNAL_DBM)) | 
|  | return -ENOTSUPP; | 
|  | conf->rssi_threshold = nconf->rssi_threshold; | 
|  | } | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_HT_OPMODE, mask)) { | 
|  | conf->ht_opmode = nconf->ht_opmode; | 
|  | sdata->vif.bss_conf.ht_operation_mode = nconf->ht_opmode; | 
|  | ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT); | 
|  | } | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, mask)) | 
|  | conf->dot11MeshHWMPactivePathToRootTimeout = | 
|  | nconf->dot11MeshHWMPactivePathToRootTimeout; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOT_INTERVAL, mask)) | 
|  | conf->dot11MeshHWMProotInterval = | 
|  | nconf->dot11MeshHWMProotInterval; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, mask)) | 
|  | conf->dot11MeshHWMPconfirmationInterval = | 
|  | nconf->dot11MeshHWMPconfirmationInterval; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_POWER_MODE, mask)) { | 
|  | conf->power_mode = nconf->power_mode; | 
|  | ieee80211_mps_local_status_update(sdata); | 
|  | } | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_AWAKE_WINDOW, mask)) | 
|  | conf->dot11MeshAwakeWindowDuration = | 
|  | nconf->dot11MeshAwakeWindowDuration; | 
|  | if (_chg_mesh_attr(NL80211_MESHCONF_PLINK_TIMEOUT, mask)) | 
|  | conf->plink_timeout = nconf->plink_timeout; | 
|  | ieee80211_mbss_info_change_notify(sdata, BSS_CHANGED_BEACON); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev, | 
|  | const struct mesh_config *conf, | 
|  | const struct mesh_setup *setup) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | int err; | 
|  |  | 
|  | memcpy(&ifmsh->mshcfg, conf, sizeof(struct mesh_config)); | 
|  | err = copy_mesh_setup(ifmsh, setup); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | /* can mesh use other SMPS modes? */ | 
|  | sdata->smps_mode = IEEE80211_SMPS_OFF; | 
|  | sdata->needed_rx_chains = sdata->local->rx_chains; | 
|  |  | 
|  | mutex_lock(&sdata->local->mtx); | 
|  | err = ieee80211_vif_use_channel(sdata, &setup->chandef, | 
|  | IEEE80211_CHANCTX_SHARED); | 
|  | mutex_unlock(&sdata->local->mtx); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return ieee80211_start_mesh(sdata); | 
|  | } | 
|  |  | 
|  | static int ieee80211_leave_mesh(struct wiphy *wiphy, struct net_device *dev) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | ieee80211_stop_mesh(sdata); | 
|  | mutex_lock(&sdata->local->mtx); | 
|  | ieee80211_vif_release_channel(sdata); | 
|  | mutex_unlock(&sdata->local->mtx); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int ieee80211_change_bss(struct wiphy *wiphy, | 
|  | struct net_device *dev, | 
|  | struct bss_parameters *params) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | enum ieee80211_band band; | 
|  | u32 changed = 0; | 
|  |  | 
|  | if (!sdata_dereference(sdata->u.ap.beacon, sdata)) | 
|  | return -ENOENT; | 
|  |  | 
|  | band = ieee80211_get_sdata_band(sdata); | 
|  |  | 
|  | if (params->use_cts_prot >= 0) { | 
|  | sdata->vif.bss_conf.use_cts_prot = params->use_cts_prot; | 
|  | changed |= BSS_CHANGED_ERP_CTS_PROT; | 
|  | } | 
|  | if (params->use_short_preamble >= 0) { | 
|  | sdata->vif.bss_conf.use_short_preamble = | 
|  | params->use_short_preamble; | 
|  | changed |= BSS_CHANGED_ERP_PREAMBLE; | 
|  | } | 
|  |  | 
|  | if (!sdata->vif.bss_conf.use_short_slot && | 
|  | band == IEEE80211_BAND_5GHZ) { | 
|  | sdata->vif.bss_conf.use_short_slot = true; | 
|  | changed |= BSS_CHANGED_ERP_SLOT; | 
|  | } | 
|  |  | 
|  | if (params->use_short_slot_time >= 0) { | 
|  | sdata->vif.bss_conf.use_short_slot = | 
|  | params->use_short_slot_time; | 
|  | changed |= BSS_CHANGED_ERP_SLOT; | 
|  | } | 
|  |  | 
|  | if (params->basic_rates) { | 
|  | ieee80211_parse_bitrates(&sdata->vif.bss_conf.chandef, | 
|  | wiphy->bands[band], | 
|  | params->basic_rates, | 
|  | params->basic_rates_len, | 
|  | &sdata->vif.bss_conf.basic_rates); | 
|  | changed |= BSS_CHANGED_BASIC_RATES; | 
|  | } | 
|  |  | 
|  | if (params->ap_isolate >= 0) { | 
|  | if (params->ap_isolate) | 
|  | sdata->flags |= IEEE80211_SDATA_DONT_BRIDGE_PACKETS; | 
|  | else | 
|  | sdata->flags &= ~IEEE80211_SDATA_DONT_BRIDGE_PACKETS; | 
|  | } | 
|  |  | 
|  | if (params->ht_opmode >= 0) { | 
|  | sdata->vif.bss_conf.ht_operation_mode = | 
|  | (u16) params->ht_opmode; | 
|  | changed |= BSS_CHANGED_HT; | 
|  | } | 
|  |  | 
|  | if (params->p2p_ctwindow >= 0) { | 
|  | sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow &= | 
|  | ~IEEE80211_P2P_OPPPS_CTWINDOW_MASK; | 
|  | sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |= | 
|  | params->p2p_ctwindow & IEEE80211_P2P_OPPPS_CTWINDOW_MASK; | 
|  | changed |= BSS_CHANGED_P2P_PS; | 
|  | } | 
|  |  | 
|  | if (params->p2p_opp_ps > 0) { | 
|  | sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |= | 
|  | IEEE80211_P2P_OPPPS_ENABLE_BIT; | 
|  | changed |= BSS_CHANGED_P2P_PS; | 
|  | } else if (params->p2p_opp_ps == 0) { | 
|  | sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow &= | 
|  | ~IEEE80211_P2P_OPPPS_ENABLE_BIT; | 
|  | changed |= BSS_CHANGED_P2P_PS; | 
|  | } | 
|  |  | 
|  | ieee80211_bss_info_change_notify(sdata, changed); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_set_txq_params(struct wiphy *wiphy, | 
|  | struct net_device *dev, | 
|  | struct ieee80211_txq_params *params) | 
|  | { | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_tx_queue_params p; | 
|  |  | 
|  | if (!local->ops->conf_tx) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | if (local->hw.queues < IEEE80211_NUM_ACS) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | memset(&p, 0, sizeof(p)); | 
|  | p.aifs = params->aifs; | 
|  | p.cw_max = params->cwmax; | 
|  | p.cw_min = params->cwmin; | 
|  | p.txop = params->txop; | 
|  |  | 
|  | /* | 
|  | * Setting tx queue params disables u-apsd because it's only | 
|  | * called in master mode. | 
|  | */ | 
|  | p.uapsd = false; | 
|  |  | 
|  | sdata->tx_conf[params->ac] = p; | 
|  | if (drv_conf_tx(local, sdata, params->ac, &p)) { | 
|  | wiphy_debug(local->hw.wiphy, | 
|  | "failed to set TX queue parameters for AC %d\n", | 
|  | params->ac); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int ieee80211_suspend(struct wiphy *wiphy, | 
|  | struct cfg80211_wowlan *wowlan) | 
|  | { | 
|  | return __ieee80211_suspend(wiphy_priv(wiphy), wowlan); | 
|  | } | 
|  |  | 
|  | static int ieee80211_resume(struct wiphy *wiphy) | 
|  | { | 
|  | return __ieee80211_resume(wiphy_priv(wiphy)); | 
|  | } | 
|  | #else | 
|  | #define ieee80211_suspend NULL | 
|  | #define ieee80211_resume NULL | 
|  | #endif | 
|  |  | 
|  | static int ieee80211_scan(struct wiphy *wiphy, | 
|  | struct cfg80211_scan_request *req) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  |  | 
|  | sdata = IEEE80211_WDEV_TO_SUB_IF(req->wdev); | 
|  |  | 
|  | switch (ieee80211_vif_type_p2p(&sdata->vif)) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | case NL80211_IFTYPE_P2P_DEVICE: | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | if (sdata->local->ops->hw_scan) | 
|  | break; | 
|  | /* | 
|  | * FIXME: implement NoA while scanning in software, | 
|  | * for now fall through to allow scanning only when | 
|  | * beaconing hasn't been configured yet | 
|  | */ | 
|  | case NL80211_IFTYPE_AP: | 
|  | /* | 
|  | * If the scan has been forced (and the driver supports | 
|  | * forcing), don't care about being beaconing already. | 
|  | * This will create problems to the attached stations (e.g. all | 
|  | * the  frames sent while scanning on other channel will be | 
|  | * lost) | 
|  | */ | 
|  | if (sdata->u.ap.beacon && | 
|  | (!(wiphy->features & NL80211_FEATURE_AP_SCAN) || | 
|  | !(req->flags & NL80211_SCAN_FLAG_AP))) | 
|  | return -EOPNOTSUPP; | 
|  | break; | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | return ieee80211_request_scan(sdata, req); | 
|  | } | 
|  |  | 
|  | static int | 
|  | ieee80211_sched_scan_start(struct wiphy *wiphy, | 
|  | struct net_device *dev, | 
|  | struct cfg80211_sched_scan_request *req) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | if (!sdata->local->ops->sched_scan_start) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | return ieee80211_request_sched_scan_start(sdata, req); | 
|  | } | 
|  |  | 
|  | static int | 
|  | ieee80211_sched_scan_stop(struct wiphy *wiphy, struct net_device *dev) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | if (!sdata->local->ops->sched_scan_stop) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | return ieee80211_request_sched_scan_stop(sdata); | 
|  | } | 
|  |  | 
|  | static int ieee80211_auth(struct wiphy *wiphy, struct net_device *dev, | 
|  | struct cfg80211_auth_request *req) | 
|  | { | 
|  | return ieee80211_mgd_auth(IEEE80211_DEV_TO_SUB_IF(dev), req); | 
|  | } | 
|  |  | 
|  | static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev, | 
|  | struct cfg80211_assoc_request *req) | 
|  | { | 
|  | return ieee80211_mgd_assoc(IEEE80211_DEV_TO_SUB_IF(dev), req); | 
|  | } | 
|  |  | 
|  | static int ieee80211_deauth(struct wiphy *wiphy, struct net_device *dev, | 
|  | struct cfg80211_deauth_request *req) | 
|  | { | 
|  | return ieee80211_mgd_deauth(IEEE80211_DEV_TO_SUB_IF(dev), req); | 
|  | } | 
|  |  | 
|  | static int ieee80211_disassoc(struct wiphy *wiphy, struct net_device *dev, | 
|  | struct cfg80211_disassoc_request *req) | 
|  | { | 
|  | return ieee80211_mgd_disassoc(IEEE80211_DEV_TO_SUB_IF(dev), req); | 
|  | } | 
|  |  | 
|  | static int ieee80211_join_ibss(struct wiphy *wiphy, struct net_device *dev, | 
|  | struct cfg80211_ibss_params *params) | 
|  | { | 
|  | return ieee80211_ibss_join(IEEE80211_DEV_TO_SUB_IF(dev), params); | 
|  | } | 
|  |  | 
|  | static int ieee80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev) | 
|  | { | 
|  | return ieee80211_ibss_leave(IEEE80211_DEV_TO_SUB_IF(dev)); | 
|  | } | 
|  |  | 
|  | static int ieee80211_join_ocb(struct wiphy *wiphy, struct net_device *dev, | 
|  | struct ocb_setup *setup) | 
|  | { | 
|  | return ieee80211_ocb_join(IEEE80211_DEV_TO_SUB_IF(dev), setup); | 
|  | } | 
|  |  | 
|  | static int ieee80211_leave_ocb(struct wiphy *wiphy, struct net_device *dev) | 
|  | { | 
|  | return ieee80211_ocb_leave(IEEE80211_DEV_TO_SUB_IF(dev)); | 
|  | } | 
|  |  | 
|  | static int ieee80211_set_mcast_rate(struct wiphy *wiphy, struct net_device *dev, | 
|  | int rate[IEEE80211_NUM_BANDS]) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | memcpy(sdata->vif.bss_conf.mcast_rate, rate, | 
|  | sizeof(int) * IEEE80211_NUM_BANDS); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed) | 
|  | { | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  | int err; | 
|  |  | 
|  | if (changed & WIPHY_PARAM_FRAG_THRESHOLD) { | 
|  | err = drv_set_frag_threshold(local, wiphy->frag_threshold); | 
|  |  | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if ((changed & WIPHY_PARAM_COVERAGE_CLASS) || | 
|  | (changed & WIPHY_PARAM_DYN_ACK)) { | 
|  | s16 coverage_class; | 
|  |  | 
|  | coverage_class = changed & WIPHY_PARAM_COVERAGE_CLASS ? | 
|  | wiphy->coverage_class : -1; | 
|  | err = drv_set_coverage_class(local, coverage_class); | 
|  |  | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if (changed & WIPHY_PARAM_RTS_THRESHOLD) { | 
|  | err = drv_set_rts_threshold(local, wiphy->rts_threshold); | 
|  |  | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if (changed & WIPHY_PARAM_RETRY_SHORT) { | 
|  | if (wiphy->retry_short > IEEE80211_MAX_TX_RETRY) | 
|  | return -EINVAL; | 
|  | local->hw.conf.short_frame_max_tx_count = wiphy->retry_short; | 
|  | } | 
|  | if (changed & WIPHY_PARAM_RETRY_LONG) { | 
|  | if (wiphy->retry_long > IEEE80211_MAX_TX_RETRY) | 
|  | return -EINVAL; | 
|  | local->hw.conf.long_frame_max_tx_count = wiphy->retry_long; | 
|  | } | 
|  | if (changed & | 
|  | (WIPHY_PARAM_RETRY_SHORT | WIPHY_PARAM_RETRY_LONG)) | 
|  | ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_RETRY_LIMITS); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_set_tx_power(struct wiphy *wiphy, | 
|  | struct wireless_dev *wdev, | 
|  | enum nl80211_tx_power_setting type, int mbm) | 
|  | { | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | enum nl80211_tx_power_setting txp_type = type; | 
|  | bool update_txp_type = false; | 
|  |  | 
|  | if (wdev) { | 
|  | sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
|  |  | 
|  | switch (type) { | 
|  | case NL80211_TX_POWER_AUTOMATIC: | 
|  | sdata->user_power_level = IEEE80211_UNSET_POWER_LEVEL; | 
|  | txp_type = NL80211_TX_POWER_LIMITED; | 
|  | break; | 
|  | case NL80211_TX_POWER_LIMITED: | 
|  | case NL80211_TX_POWER_FIXED: | 
|  | if (mbm < 0 || (mbm % 100)) | 
|  | return -EOPNOTSUPP; | 
|  | sdata->user_power_level = MBM_TO_DBM(mbm); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (txp_type != sdata->vif.bss_conf.txpower_type) { | 
|  | update_txp_type = true; | 
|  | sdata->vif.bss_conf.txpower_type = txp_type; | 
|  | } | 
|  |  | 
|  | ieee80211_recalc_txpower(sdata, update_txp_type); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | switch (type) { | 
|  | case NL80211_TX_POWER_AUTOMATIC: | 
|  | local->user_power_level = IEEE80211_UNSET_POWER_LEVEL; | 
|  | txp_type = NL80211_TX_POWER_LIMITED; | 
|  | break; | 
|  | case NL80211_TX_POWER_LIMITED: | 
|  | case NL80211_TX_POWER_FIXED: | 
|  | if (mbm < 0 || (mbm % 100)) | 
|  | return -EOPNOTSUPP; | 
|  | local->user_power_level = MBM_TO_DBM(mbm); | 
|  | break; | 
|  | } | 
|  |  | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | sdata->user_power_level = local->user_power_level; | 
|  | if (txp_type != sdata->vif.bss_conf.txpower_type) | 
|  | update_txp_type = true; | 
|  | sdata->vif.bss_conf.txpower_type = txp_type; | 
|  | } | 
|  | list_for_each_entry(sdata, &local->interfaces, list) | 
|  | ieee80211_recalc_txpower(sdata, update_txp_type); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_get_tx_power(struct wiphy *wiphy, | 
|  | struct wireless_dev *wdev, | 
|  | int *dbm) | 
|  | { | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
|  |  | 
|  | if (local->ops->get_txpower) | 
|  | return drv_get_txpower(local, sdata, dbm); | 
|  |  | 
|  | if (!local->use_chanctx) | 
|  | *dbm = local->hw.conf.power_level; | 
|  | else | 
|  | *dbm = sdata->vif.bss_conf.txpower; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev, | 
|  | const u8 *addr) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | memcpy(&sdata->u.wds.remote_addr, addr, ETH_ALEN); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ieee80211_rfkill_poll(struct wiphy *wiphy) | 
|  | { | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  |  | 
|  | drv_rfkill_poll(local); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_NL80211_TESTMODE | 
|  | static int ieee80211_testmode_cmd(struct wiphy *wiphy, | 
|  | struct wireless_dev *wdev, | 
|  | void *data, int len) | 
|  | { | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  | struct ieee80211_vif *vif = NULL; | 
|  |  | 
|  | if (!local->ops->testmode_cmd) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | if (wdev) { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  |  | 
|  | sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
|  | if (sdata->flags & IEEE80211_SDATA_IN_DRIVER) | 
|  | vif = &sdata->vif; | 
|  | } | 
|  |  | 
|  | return local->ops->testmode_cmd(&local->hw, vif, data, len); | 
|  | } | 
|  |  | 
|  | static int ieee80211_testmode_dump(struct wiphy *wiphy, | 
|  | struct sk_buff *skb, | 
|  | struct netlink_callback *cb, | 
|  | void *data, int len) | 
|  | { | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  |  | 
|  | if (!local->ops->testmode_dump) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | return local->ops->testmode_dump(&local->hw, skb, cb, data, len); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | int __ieee80211_request_smps_ap(struct ieee80211_sub_if_data *sdata, | 
|  | enum ieee80211_smps_mode smps_mode) | 
|  | { | 
|  | struct sta_info *sta; | 
|  | enum ieee80211_smps_mode old_req; | 
|  |  | 
|  | if (WARN_ON_ONCE(sdata->vif.type != NL80211_IFTYPE_AP)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) | 
|  | return 0; | 
|  |  | 
|  | old_req = sdata->u.ap.req_smps; | 
|  | sdata->u.ap.req_smps = smps_mode; | 
|  |  | 
|  | /* AUTOMATIC doesn't mean much for AP - don't allow it */ | 
|  | if (old_req == smps_mode || | 
|  | smps_mode == IEEE80211_SMPS_AUTOMATIC) | 
|  | return 0; | 
|  |  | 
|  | /* If no associated stations, there's no need to do anything */ | 
|  | if (!atomic_read(&sdata->u.ap.num_mcast_sta)) { | 
|  | sdata->smps_mode = smps_mode; | 
|  | ieee80211_queue_work(&sdata->local->hw, &sdata->recalc_smps); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | ht_dbg(sdata, | 
|  | "SMPS %d requested in AP mode, sending Action frame to %d stations\n", | 
|  | smps_mode, atomic_read(&sdata->u.ap.num_mcast_sta)); | 
|  |  | 
|  | mutex_lock(&sdata->local->sta_mtx); | 
|  | list_for_each_entry(sta, &sdata->local->sta_list, list) { | 
|  | /* | 
|  | * Only stations associated to our AP and | 
|  | * associated VLANs | 
|  | */ | 
|  | if (sta->sdata->bss != &sdata->u.ap) | 
|  | continue; | 
|  |  | 
|  | /* This station doesn't support MIMO - skip it */ | 
|  | if (sta_info_tx_streams(sta) == 1) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * Don't wake up a STA just to send the action frame | 
|  | * unless we are getting more restrictive. | 
|  | */ | 
|  | if (test_sta_flag(sta, WLAN_STA_PS_STA) && | 
|  | !ieee80211_smps_is_restrictive(sta->known_smps_mode, | 
|  | smps_mode)) { | 
|  | ht_dbg(sdata, "Won't send SMPS to sleeping STA %pM\n", | 
|  | sta->sta.addr); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If the STA is not authorized, wait until it gets | 
|  | * authorized and the action frame will be sent then. | 
|  | */ | 
|  | if (!test_sta_flag(sta, WLAN_STA_AUTHORIZED)) | 
|  | continue; | 
|  |  | 
|  | ht_dbg(sdata, "Sending SMPS to %pM\n", sta->sta.addr); | 
|  | ieee80211_send_smps_action(sdata, smps_mode, sta->sta.addr, | 
|  | sdata->vif.bss_conf.bssid); | 
|  | } | 
|  | mutex_unlock(&sdata->local->sta_mtx); | 
|  |  | 
|  | sdata->smps_mode = smps_mode; | 
|  | ieee80211_queue_work(&sdata->local->hw, &sdata->recalc_smps); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int __ieee80211_request_smps_mgd(struct ieee80211_sub_if_data *sdata, | 
|  | enum ieee80211_smps_mode smps_mode) | 
|  | { | 
|  | const u8 *ap; | 
|  | enum ieee80211_smps_mode old_req; | 
|  | int err; | 
|  |  | 
|  | lockdep_assert_held(&sdata->wdev.mtx); | 
|  |  | 
|  | if (WARN_ON_ONCE(sdata->vif.type != NL80211_IFTYPE_STATION)) | 
|  | return -EINVAL; | 
|  |  | 
|  | old_req = sdata->u.mgd.req_smps; | 
|  | sdata->u.mgd.req_smps = smps_mode; | 
|  |  | 
|  | if (old_req == smps_mode && | 
|  | smps_mode != IEEE80211_SMPS_AUTOMATIC) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * If not associated, or current association is not an HT | 
|  | * association, there's no need to do anything, just store | 
|  | * the new value until we associate. | 
|  | */ | 
|  | if (!sdata->u.mgd.associated || | 
|  | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) | 
|  | return 0; | 
|  |  | 
|  | ap = sdata->u.mgd.associated->bssid; | 
|  |  | 
|  | if (smps_mode == IEEE80211_SMPS_AUTOMATIC) { | 
|  | if (sdata->u.mgd.powersave) | 
|  | smps_mode = IEEE80211_SMPS_DYNAMIC; | 
|  | else | 
|  | smps_mode = IEEE80211_SMPS_OFF; | 
|  | } | 
|  |  | 
|  | /* send SM PS frame to AP */ | 
|  | err = ieee80211_send_smps_action(sdata, smps_mode, | 
|  | ap, ap); | 
|  | if (err) | 
|  | sdata->u.mgd.req_smps = old_req; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, | 
|  | bool enabled, int timeout) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | 
|  |  | 
|  | if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | if (enabled == sdata->u.mgd.powersave && | 
|  | timeout == local->dynamic_ps_forced_timeout) | 
|  | return 0; | 
|  |  | 
|  | sdata->u.mgd.powersave = enabled; | 
|  | local->dynamic_ps_forced_timeout = timeout; | 
|  |  | 
|  | /* no change, but if automatic follow powersave */ | 
|  | sdata_lock(sdata); | 
|  | __ieee80211_request_smps_mgd(sdata, sdata->u.mgd.req_smps); | 
|  | sdata_unlock(sdata); | 
|  |  | 
|  | if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS) | 
|  | ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); | 
|  |  | 
|  | ieee80211_recalc_ps(local, -1); | 
|  | ieee80211_recalc_ps_vif(sdata); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_set_cqm_rssi_config(struct wiphy *wiphy, | 
|  | struct net_device *dev, | 
|  | s32 rssi_thold, u32 rssi_hyst) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_vif *vif = &sdata->vif; | 
|  | struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; | 
|  |  | 
|  | if (rssi_thold == bss_conf->cqm_rssi_thold && | 
|  | rssi_hyst == bss_conf->cqm_rssi_hyst) | 
|  | return 0; | 
|  |  | 
|  | bss_conf->cqm_rssi_thold = rssi_thold; | 
|  | bss_conf->cqm_rssi_hyst = rssi_hyst; | 
|  |  | 
|  | /* tell the driver upon association, unless already associated */ | 
|  | if (sdata->u.mgd.associated && | 
|  | sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI) | 
|  | ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_CQM); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_set_bitrate_mask(struct wiphy *wiphy, | 
|  | struct net_device *dev, | 
|  | const u8 *addr, | 
|  | const struct cfg80211_bitrate_mask *mask) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | 
|  | int i, ret; | 
|  |  | 
|  | if (!ieee80211_sdata_running(sdata)) | 
|  | return -ENETDOWN; | 
|  |  | 
|  | if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) { | 
|  | ret = drv_set_bitrate_mask(local, sdata, mask); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < IEEE80211_NUM_BANDS; i++) { | 
|  | struct ieee80211_supported_band *sband = wiphy->bands[i]; | 
|  | int j; | 
|  |  | 
|  | sdata->rc_rateidx_mask[i] = mask->control[i].legacy; | 
|  | memcpy(sdata->rc_rateidx_mcs_mask[i], mask->control[i].ht_mcs, | 
|  | sizeof(mask->control[i].ht_mcs)); | 
|  |  | 
|  | sdata->rc_has_mcs_mask[i] = false; | 
|  | if (!sband) | 
|  | continue; | 
|  |  | 
|  | for (j = 0; j < IEEE80211_HT_MCS_MASK_LEN; j++) | 
|  | if (~sdata->rc_rateidx_mcs_mask[i][j]) { | 
|  | sdata->rc_has_mcs_mask[i] = true; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static bool ieee80211_coalesce_started_roc(struct ieee80211_local *local, | 
|  | struct ieee80211_roc_work *new_roc, | 
|  | struct ieee80211_roc_work *cur_roc) | 
|  | { | 
|  | unsigned long j = jiffies; | 
|  | unsigned long cur_roc_end = cur_roc->hw_start_time + | 
|  | msecs_to_jiffies(cur_roc->duration); | 
|  | struct ieee80211_roc_work *next_roc; | 
|  | int new_dur; | 
|  |  | 
|  | if (WARN_ON(!cur_roc->started || !cur_roc->hw_begun)) | 
|  | return false; | 
|  |  | 
|  | if (time_after(j + IEEE80211_ROC_MIN_LEFT, cur_roc_end)) | 
|  | return false; | 
|  |  | 
|  | ieee80211_handle_roc_started(new_roc); | 
|  |  | 
|  | new_dur = new_roc->duration - jiffies_to_msecs(cur_roc_end - j); | 
|  |  | 
|  | /* cur_roc is long enough - add new_roc to the dependents list. */ | 
|  | if (new_dur <= 0) { | 
|  | list_add_tail(&new_roc->list, &cur_roc->dependents); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | new_roc->duration = new_dur; | 
|  |  | 
|  | /* | 
|  | * if cur_roc was already coalesced before, we might | 
|  | * want to extend the next roc instead of adding | 
|  | * a new one. | 
|  | */ | 
|  | next_roc = list_entry(cur_roc->list.next, | 
|  | struct ieee80211_roc_work, list); | 
|  | if (&next_roc->list != &local->roc_list && | 
|  | next_roc->chan == new_roc->chan && | 
|  | next_roc->sdata == new_roc->sdata && | 
|  | !WARN_ON(next_roc->started)) { | 
|  | list_add_tail(&new_roc->list, &next_roc->dependents); | 
|  | next_roc->duration = max(next_roc->duration, | 
|  | new_roc->duration); | 
|  | next_roc->type = max(next_roc->type, new_roc->type); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* add right after cur_roc */ | 
|  | list_add(&new_roc->list, &cur_roc->list); | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static int ieee80211_start_roc_work(struct ieee80211_local *local, | 
|  | struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_channel *channel, | 
|  | unsigned int duration, u64 *cookie, | 
|  | struct sk_buff *txskb, | 
|  | enum ieee80211_roc_type type) | 
|  | { | 
|  | struct ieee80211_roc_work *roc, *tmp; | 
|  | bool queued = false; | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&local->mtx); | 
|  |  | 
|  | if (local->use_chanctx && !local->ops->remain_on_channel) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | roc = kzalloc(sizeof(*roc), GFP_KERNEL); | 
|  | if (!roc) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* | 
|  | * If the duration is zero, then the driver | 
|  | * wouldn't actually do anything. Set it to | 
|  | * 10 for now. | 
|  | * | 
|  | * TODO: cancel the off-channel operation | 
|  | *       when we get the SKB's TX status and | 
|  | *       the wait time was zero before. | 
|  | */ | 
|  | if (!duration) | 
|  | duration = 10; | 
|  |  | 
|  | roc->chan = channel; | 
|  | roc->duration = duration; | 
|  | roc->req_duration = duration; | 
|  | roc->frame = txskb; | 
|  | roc->type = type; | 
|  | roc->mgmt_tx_cookie = (unsigned long)txskb; | 
|  | roc->sdata = sdata; | 
|  | INIT_DELAYED_WORK(&roc->work, ieee80211_sw_roc_work); | 
|  | INIT_LIST_HEAD(&roc->dependents); | 
|  |  | 
|  | /* | 
|  | * cookie is either the roc cookie (for normal roc) | 
|  | * or the SKB (for mgmt TX) | 
|  | */ | 
|  | if (!txskb) { | 
|  | /* local->mtx protects this */ | 
|  | local->roc_cookie_counter++; | 
|  | roc->cookie = local->roc_cookie_counter; | 
|  | /* wow, you wrapped 64 bits ... more likely a bug */ | 
|  | if (WARN_ON(roc->cookie == 0)) { | 
|  | roc->cookie = 1; | 
|  | local->roc_cookie_counter++; | 
|  | } | 
|  | *cookie = roc->cookie; | 
|  | } else { | 
|  | *cookie = (unsigned long)txskb; | 
|  | } | 
|  |  | 
|  | /* if there's one pending or we're scanning, queue this one */ | 
|  | if (!list_empty(&local->roc_list) || | 
|  | local->scanning || ieee80211_is_radar_required(local)) | 
|  | goto out_check_combine; | 
|  |  | 
|  | /* if not HW assist, just queue & schedule work */ | 
|  | if (!local->ops->remain_on_channel) { | 
|  | ieee80211_queue_delayed_work(&local->hw, &roc->work, 0); | 
|  | goto out_queue; | 
|  | } | 
|  |  | 
|  | /* otherwise actually kick it off here (for error handling) */ | 
|  |  | 
|  | ret = drv_remain_on_channel(local, sdata, channel, duration, type); | 
|  | if (ret) { | 
|  | kfree(roc); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | roc->started = true; | 
|  | goto out_queue; | 
|  |  | 
|  | out_check_combine: | 
|  | list_for_each_entry(tmp, &local->roc_list, list) { | 
|  | if (tmp->chan != channel || tmp->sdata != sdata) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * Extend this ROC if possible: | 
|  | * | 
|  | * If it hasn't started yet, just increase the duration | 
|  | * and add the new one to the list of dependents. | 
|  | * If the type of the new ROC has higher priority, modify the | 
|  | * type of the previous one to match that of the new one. | 
|  | */ | 
|  | if (!tmp->started) { | 
|  | list_add_tail(&roc->list, &tmp->dependents); | 
|  | tmp->duration = max(tmp->duration, roc->duration); | 
|  | tmp->type = max(tmp->type, roc->type); | 
|  | queued = true; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* If it has already started, it's more difficult ... */ | 
|  | if (local->ops->remain_on_channel) { | 
|  | /* | 
|  | * In the offloaded ROC case, if it hasn't begun, add | 
|  | * this new one to the dependent list to be handled | 
|  | * when the master one begins. If it has begun, | 
|  | * check that there's still a minimum time left and | 
|  | * if so, start this one, transmitting the frame, but | 
|  | * add it to the list directly after this one with | 
|  | * a reduced time so we'll ask the driver to execute | 
|  | * it right after finishing the previous one, in the | 
|  | * hope that it'll also be executed right afterwards, | 
|  | * effectively extending the old one. | 
|  | * If there's no minimum time left, just add it to the | 
|  | * normal list. | 
|  | * TODO: the ROC type is ignored here, assuming that it | 
|  | * is better to immediately use the current ROC. | 
|  | */ | 
|  | if (!tmp->hw_begun) { | 
|  | list_add_tail(&roc->list, &tmp->dependents); | 
|  | queued = true; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (ieee80211_coalesce_started_roc(local, roc, tmp)) | 
|  | queued = true; | 
|  | } else if (del_timer_sync(&tmp->work.timer)) { | 
|  | unsigned long new_end; | 
|  |  | 
|  | /* | 
|  | * In the software ROC case, cancel the timer, if | 
|  | * that fails then the finish work is already | 
|  | * queued/pending and thus we queue the new ROC | 
|  | * normally, if that succeeds then we can extend | 
|  | * the timer duration and TX the frame (if any.) | 
|  | */ | 
|  |  | 
|  | list_add_tail(&roc->list, &tmp->dependents); | 
|  | queued = true; | 
|  |  | 
|  | new_end = jiffies + msecs_to_jiffies(roc->duration); | 
|  |  | 
|  | /* ok, it was started & we canceled timer */ | 
|  | if (time_after(new_end, tmp->work.timer.expires)) | 
|  | mod_timer(&tmp->work.timer, new_end); | 
|  | else | 
|  | add_timer(&tmp->work.timer); | 
|  |  | 
|  | ieee80211_handle_roc_started(roc); | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | out_queue: | 
|  | if (!queued) | 
|  | list_add_tail(&roc->list, &local->roc_list); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_remain_on_channel(struct wiphy *wiphy, | 
|  | struct wireless_dev *wdev, | 
|  | struct ieee80211_channel *chan, | 
|  | unsigned int duration, | 
|  | u64 *cookie) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | ret = ieee80211_start_roc_work(local, sdata, chan, | 
|  | duration, cookie, NULL, | 
|  | IEEE80211_ROC_TYPE_NORMAL); | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ieee80211_cancel_roc(struct ieee80211_local *local, | 
|  | u64 cookie, bool mgmt_tx) | 
|  | { | 
|  | struct ieee80211_roc_work *roc, *tmp, *found = NULL; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | list_for_each_entry_safe(roc, tmp, &local->roc_list, list) { | 
|  | struct ieee80211_roc_work *dep, *tmp2; | 
|  |  | 
|  | list_for_each_entry_safe(dep, tmp2, &roc->dependents, list) { | 
|  | if (!mgmt_tx && dep->cookie != cookie) | 
|  | continue; | 
|  | else if (mgmt_tx && dep->mgmt_tx_cookie != cookie) | 
|  | continue; | 
|  | /* found dependent item -- just remove it */ | 
|  | list_del(&dep->list); | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | ieee80211_roc_notify_destroy(dep, true); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (!mgmt_tx && roc->cookie != cookie) | 
|  | continue; | 
|  | else if (mgmt_tx && roc->mgmt_tx_cookie != cookie) | 
|  | continue; | 
|  |  | 
|  | found = roc; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!found) { | 
|  | mutex_unlock(&local->mtx); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We found the item to cancel, so do that. Note that it | 
|  | * may have dependents, which we also cancel (and send | 
|  | * the expired signal for.) Not doing so would be quite | 
|  | * tricky here, but we may need to fix it later. | 
|  | */ | 
|  |  | 
|  | if (local->ops->remain_on_channel) { | 
|  | if (found->started) { | 
|  | ret = drv_cancel_remain_on_channel(local); | 
|  | if (WARN_ON_ONCE(ret)) { | 
|  | mutex_unlock(&local->mtx); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | list_del(&found->list); | 
|  |  | 
|  | if (found->started) | 
|  | ieee80211_start_next_roc(local); | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | ieee80211_roc_notify_destroy(found, true); | 
|  | } else { | 
|  | /* work may be pending so use it all the time */ | 
|  | found->abort = true; | 
|  | ieee80211_queue_delayed_work(&local->hw, &found->work, 0); | 
|  |  | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | /* work will clean up etc */ | 
|  | flush_delayed_work(&found->work); | 
|  | WARN_ON(!found->to_be_freed); | 
|  | kfree(found); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_cancel_remain_on_channel(struct wiphy *wiphy, | 
|  | struct wireless_dev *wdev, | 
|  | u64 cookie) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | return ieee80211_cancel_roc(local, cookie, false); | 
|  | } | 
|  |  | 
|  | static int ieee80211_start_radar_detection(struct wiphy *wiphy, | 
|  | struct net_device *dev, | 
|  | struct cfg80211_chan_def *chandef, | 
|  | u32 cac_time_ms) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | int err; | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | if (!list_empty(&local->roc_list) || local->scanning) { | 
|  | err = -EBUSY; | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | /* whatever, but channel contexts should not complain about that one */ | 
|  | sdata->smps_mode = IEEE80211_SMPS_OFF; | 
|  | sdata->needed_rx_chains = local->rx_chains; | 
|  |  | 
|  | err = ieee80211_vif_use_channel(sdata, chandef, | 
|  | IEEE80211_CHANCTX_SHARED); | 
|  | if (err) | 
|  | goto out_unlock; | 
|  |  | 
|  | ieee80211_queue_delayed_work(&sdata->local->hw, | 
|  | &sdata->dfs_cac_timer_work, | 
|  | msecs_to_jiffies(cac_time_ms)); | 
|  |  | 
|  | out_unlock: | 
|  | mutex_unlock(&local->mtx); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static struct cfg80211_beacon_data * | 
|  | cfg80211_beacon_dup(struct cfg80211_beacon_data *beacon) | 
|  | { | 
|  | struct cfg80211_beacon_data *new_beacon; | 
|  | u8 *pos; | 
|  | int len; | 
|  |  | 
|  | len = beacon->head_len + beacon->tail_len + beacon->beacon_ies_len + | 
|  | beacon->proberesp_ies_len + beacon->assocresp_ies_len + | 
|  | beacon->probe_resp_len; | 
|  |  | 
|  | new_beacon = kzalloc(sizeof(*new_beacon) + len, GFP_KERNEL); | 
|  | if (!new_beacon) | 
|  | return NULL; | 
|  |  | 
|  | pos = (u8 *)(new_beacon + 1); | 
|  | if (beacon->head_len) { | 
|  | new_beacon->head_len = beacon->head_len; | 
|  | new_beacon->head = pos; | 
|  | memcpy(pos, beacon->head, beacon->head_len); | 
|  | pos += beacon->head_len; | 
|  | } | 
|  | if (beacon->tail_len) { | 
|  | new_beacon->tail_len = beacon->tail_len; | 
|  | new_beacon->tail = pos; | 
|  | memcpy(pos, beacon->tail, beacon->tail_len); | 
|  | pos += beacon->tail_len; | 
|  | } | 
|  | if (beacon->beacon_ies_len) { | 
|  | new_beacon->beacon_ies_len = beacon->beacon_ies_len; | 
|  | new_beacon->beacon_ies = pos; | 
|  | memcpy(pos, beacon->beacon_ies, beacon->beacon_ies_len); | 
|  | pos += beacon->beacon_ies_len; | 
|  | } | 
|  | if (beacon->proberesp_ies_len) { | 
|  | new_beacon->proberesp_ies_len = beacon->proberesp_ies_len; | 
|  | new_beacon->proberesp_ies = pos; | 
|  | memcpy(pos, beacon->proberesp_ies, beacon->proberesp_ies_len); | 
|  | pos += beacon->proberesp_ies_len; | 
|  | } | 
|  | if (beacon->assocresp_ies_len) { | 
|  | new_beacon->assocresp_ies_len = beacon->assocresp_ies_len; | 
|  | new_beacon->assocresp_ies = pos; | 
|  | memcpy(pos, beacon->assocresp_ies, beacon->assocresp_ies_len); | 
|  | pos += beacon->assocresp_ies_len; | 
|  | } | 
|  | if (beacon->probe_resp_len) { | 
|  | new_beacon->probe_resp_len = beacon->probe_resp_len; | 
|  | beacon->probe_resp = pos; | 
|  | memcpy(pos, beacon->probe_resp, beacon->probe_resp_len); | 
|  | pos += beacon->probe_resp_len; | 
|  | } | 
|  |  | 
|  | return new_beacon; | 
|  | } | 
|  |  | 
|  | void ieee80211_csa_finish(struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  |  | 
|  | ieee80211_queue_work(&sdata->local->hw, | 
|  | &sdata->csa_finalize_work); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_csa_finish); | 
|  |  | 
|  | static int ieee80211_set_after_csa_beacon(struct ieee80211_sub_if_data *sdata, | 
|  | u32 *changed) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_AP: | 
|  | err = ieee80211_assign_beacon(sdata, sdata->u.ap.next_beacon, | 
|  | NULL); | 
|  | kfree(sdata->u.ap.next_beacon); | 
|  | sdata->u.ap.next_beacon = NULL; | 
|  |  | 
|  | if (err < 0) | 
|  | return err; | 
|  | *changed |= err; | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | err = ieee80211_ibss_finish_csa(sdata); | 
|  | if (err < 0) | 
|  | return err; | 
|  | *changed |= err; | 
|  | break; | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | err = ieee80211_mesh_finish_csa(sdata); | 
|  | if (err < 0) | 
|  | return err; | 
|  | *changed |= err; | 
|  | break; | 
|  | #endif | 
|  | default: | 
|  | WARN_ON(1); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __ieee80211_csa_finalize(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | u32 changed = 0; | 
|  | int err; | 
|  |  | 
|  | sdata_assert_lock(sdata); | 
|  | lockdep_assert_held(&local->mtx); | 
|  | lockdep_assert_held(&local->chanctx_mtx); | 
|  |  | 
|  | /* | 
|  | * using reservation isn't immediate as it may be deferred until later | 
|  | * with multi-vif. once reservation is complete it will re-schedule the | 
|  | * work with no reserved_chanctx so verify chandef to check if it | 
|  | * completed successfully | 
|  | */ | 
|  |  | 
|  | if (sdata->reserved_chanctx) { | 
|  | /* | 
|  | * with multi-vif csa driver may call ieee80211_csa_finish() | 
|  | * many times while waiting for other interfaces to use their | 
|  | * reservations | 
|  | */ | 
|  | if (sdata->reserved_ready) | 
|  | return 0; | 
|  |  | 
|  | return ieee80211_vif_use_reserved_context(sdata); | 
|  | } | 
|  |  | 
|  | if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef, | 
|  | &sdata->csa_chandef)) | 
|  | return -EINVAL; | 
|  |  | 
|  | sdata->vif.csa_active = false; | 
|  |  | 
|  | err = ieee80211_set_after_csa_beacon(sdata, &changed); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | ieee80211_bss_info_change_notify(sdata, changed); | 
|  |  | 
|  | if (sdata->csa_block_tx) { | 
|  | ieee80211_wake_vif_queues(local, sdata, | 
|  | IEEE80211_QUEUE_STOP_REASON_CSA); | 
|  | sdata->csa_block_tx = false; | 
|  | } | 
|  |  | 
|  | err = drv_post_channel_switch(sdata); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | cfg80211_ch_switch_notify(sdata->dev, &sdata->csa_chandef); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ieee80211_csa_finalize(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | if (__ieee80211_csa_finalize(sdata)) { | 
|  | sdata_info(sdata, "failed to finalize CSA, disconnecting\n"); | 
|  | cfg80211_stop_iface(sdata->local->hw.wiphy, &sdata->wdev, | 
|  | GFP_KERNEL); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ieee80211_csa_finalize_work(struct work_struct *work) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | container_of(work, struct ieee80211_sub_if_data, | 
|  | csa_finalize_work); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | sdata_lock(sdata); | 
|  | mutex_lock(&local->mtx); | 
|  | mutex_lock(&local->chanctx_mtx); | 
|  |  | 
|  | /* AP might have been stopped while waiting for the lock. */ | 
|  | if (!sdata->vif.csa_active) | 
|  | goto unlock; | 
|  |  | 
|  | if (!ieee80211_sdata_running(sdata)) | 
|  | goto unlock; | 
|  |  | 
|  | ieee80211_csa_finalize(sdata); | 
|  |  | 
|  | unlock: | 
|  | mutex_unlock(&local->chanctx_mtx); | 
|  | mutex_unlock(&local->mtx); | 
|  | sdata_unlock(sdata); | 
|  | } | 
|  |  | 
|  | static int ieee80211_set_csa_beacon(struct ieee80211_sub_if_data *sdata, | 
|  | struct cfg80211_csa_settings *params, | 
|  | u32 *changed) | 
|  | { | 
|  | struct ieee80211_csa_settings csa = {}; | 
|  | int err; | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_AP: | 
|  | sdata->u.ap.next_beacon = | 
|  | cfg80211_beacon_dup(¶ms->beacon_after); | 
|  | if (!sdata->u.ap.next_beacon) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* | 
|  | * With a count of 0, we don't have to wait for any | 
|  | * TBTT before switching, so complete the CSA | 
|  | * immediately.  In theory, with a count == 1 we | 
|  | * should delay the switch until just before the next | 
|  | * TBTT, but that would complicate things so we switch | 
|  | * immediately too.  If we would delay the switch | 
|  | * until the next TBTT, we would have to set the probe | 
|  | * response here. | 
|  | * | 
|  | * TODO: A channel switch with count <= 1 without | 
|  | * sending a CSA action frame is kind of useless, | 
|  | * because the clients won't know we're changing | 
|  | * channels.  The action frame must be implemented | 
|  | * either here or in the userspace. | 
|  | */ | 
|  | if (params->count <= 1) | 
|  | break; | 
|  |  | 
|  | if ((params->n_counter_offsets_beacon > | 
|  | IEEE80211_MAX_CSA_COUNTERS_NUM) || | 
|  | (params->n_counter_offsets_presp > | 
|  | IEEE80211_MAX_CSA_COUNTERS_NUM)) | 
|  | return -EINVAL; | 
|  |  | 
|  | csa.counter_offsets_beacon = params->counter_offsets_beacon; | 
|  | csa.counter_offsets_presp = params->counter_offsets_presp; | 
|  | csa.n_counter_offsets_beacon = params->n_counter_offsets_beacon; | 
|  | csa.n_counter_offsets_presp = params->n_counter_offsets_presp; | 
|  | csa.count = params->count; | 
|  |  | 
|  | err = ieee80211_assign_beacon(sdata, ¶ms->beacon_csa, &csa); | 
|  | if (err < 0) { | 
|  | kfree(sdata->u.ap.next_beacon); | 
|  | return err; | 
|  | } | 
|  | *changed |= err; | 
|  |  | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | if (!sdata->vif.bss_conf.ibss_joined) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (params->chandef.width != sdata->u.ibss.chandef.width) | 
|  | return -EINVAL; | 
|  |  | 
|  | switch (params->chandef.width) { | 
|  | case NL80211_CHAN_WIDTH_40: | 
|  | if (cfg80211_get_chandef_type(¶ms->chandef) != | 
|  | cfg80211_get_chandef_type(&sdata->u.ibss.chandef)) | 
|  | return -EINVAL; | 
|  | case NL80211_CHAN_WIDTH_5: | 
|  | case NL80211_CHAN_WIDTH_10: | 
|  | case NL80211_CHAN_WIDTH_20_NOHT: | 
|  | case NL80211_CHAN_WIDTH_20: | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* changes into another band are not supported */ | 
|  | if (sdata->u.ibss.chandef.chan->band != | 
|  | params->chandef.chan->band) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* see comments in the NL80211_IFTYPE_AP block */ | 
|  | if (params->count > 1) { | 
|  | err = ieee80211_ibss_csa_beacon(sdata, params); | 
|  | if (err < 0) | 
|  | return err; | 
|  | *changed |= err; | 
|  | } | 
|  |  | 
|  | ieee80211_send_action_csa(sdata, params); | 
|  |  | 
|  | break; | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | case NL80211_IFTYPE_MESH_POINT: { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  |  | 
|  | if (params->chandef.width != sdata->vif.bss_conf.chandef.width) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* changes into another band are not supported */ | 
|  | if (sdata->vif.bss_conf.chandef.chan->band != | 
|  | params->chandef.chan->band) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_NONE) { | 
|  | ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_INIT; | 
|  | if (!ifmsh->pre_value) | 
|  | ifmsh->pre_value = 1; | 
|  | else | 
|  | ifmsh->pre_value++; | 
|  | } | 
|  |  | 
|  | /* see comments in the NL80211_IFTYPE_AP block */ | 
|  | if (params->count > 1) { | 
|  | err = ieee80211_mesh_csa_beacon(sdata, params); | 
|  | if (err < 0) { | 
|  | ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; | 
|  | return err; | 
|  | } | 
|  | *changed |= err; | 
|  | } | 
|  |  | 
|  | if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT) | 
|  | ieee80211_send_action_csa(sdata, params); | 
|  |  | 
|  | break; | 
|  | } | 
|  | #endif | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | __ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, | 
|  | struct cfg80211_csa_settings *params) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_channel_switch ch_switch; | 
|  | struct ieee80211_chanctx_conf *conf; | 
|  | struct ieee80211_chanctx *chanctx; | 
|  | u32 changed = 0; | 
|  | int err; | 
|  |  | 
|  | sdata_assert_lock(sdata); | 
|  | lockdep_assert_held(&local->mtx); | 
|  |  | 
|  | if (!list_empty(&local->roc_list) || local->scanning) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (sdata->wdev.cac_started) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (cfg80211_chandef_identical(¶ms->chandef, | 
|  | &sdata->vif.bss_conf.chandef)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* don't allow another channel switch if one is already active. */ | 
|  | if (sdata->vif.csa_active) | 
|  | return -EBUSY; | 
|  |  | 
|  | mutex_lock(&local->chanctx_mtx); | 
|  | conf = rcu_dereference_protected(sdata->vif.chanctx_conf, | 
|  | lockdep_is_held(&local->chanctx_mtx)); | 
|  | if (!conf) { | 
|  | err = -EBUSY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | chanctx = container_of(conf, struct ieee80211_chanctx, conf); | 
|  | if (!chanctx) { | 
|  | err = -EBUSY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ch_switch.timestamp = 0; | 
|  | ch_switch.device_timestamp = 0; | 
|  | ch_switch.block_tx = params->block_tx; | 
|  | ch_switch.chandef = params->chandef; | 
|  | ch_switch.count = params->count; | 
|  |  | 
|  | err = drv_pre_channel_switch(sdata, &ch_switch); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | err = ieee80211_vif_reserve_chanctx(sdata, ¶ms->chandef, | 
|  | chanctx->mode, | 
|  | params->radar_required); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | /* if reservation is invalid then this will fail */ | 
|  | err = ieee80211_check_combinations(sdata, NULL, chanctx->mode, 0); | 
|  | if (err) { | 
|  | ieee80211_vif_unreserve_chanctx(sdata); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | err = ieee80211_set_csa_beacon(sdata, params, &changed); | 
|  | if (err) { | 
|  | ieee80211_vif_unreserve_chanctx(sdata); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | sdata->csa_chandef = params->chandef; | 
|  | sdata->csa_block_tx = params->block_tx; | 
|  | sdata->vif.csa_active = true; | 
|  |  | 
|  | if (sdata->csa_block_tx) | 
|  | ieee80211_stop_vif_queues(local, sdata, | 
|  | IEEE80211_QUEUE_STOP_REASON_CSA); | 
|  |  | 
|  | cfg80211_ch_switch_started_notify(sdata->dev, &sdata->csa_chandef, | 
|  | params->count); | 
|  |  | 
|  | if (changed) { | 
|  | ieee80211_bss_info_change_notify(sdata, changed); | 
|  | drv_channel_switch_beacon(sdata, ¶ms->chandef); | 
|  | } else { | 
|  | /* if the beacon didn't change, we can finalize immediately */ | 
|  | ieee80211_csa_finalize(sdata); | 
|  | } | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&local->chanctx_mtx); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, | 
|  | struct cfg80211_csa_settings *params) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | int err; | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | err = __ieee80211_channel_switch(wiphy, dev, params); | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, | 
|  | struct cfg80211_mgmt_tx_params *params, | 
|  | u64 *cookie) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sk_buff *skb; | 
|  | struct sta_info *sta; | 
|  | const struct ieee80211_mgmt *mgmt = (void *)params->buf; | 
|  | bool need_offchan = false; | 
|  | u32 flags; | 
|  | int ret; | 
|  | u8 *data; | 
|  |  | 
|  | if (params->dont_wait_for_ack) | 
|  | flags = IEEE80211_TX_CTL_NO_ACK; | 
|  | else | 
|  | flags = IEEE80211_TX_INTFL_NL80211_FRAME_TX | | 
|  | IEEE80211_TX_CTL_REQ_TX_STATUS; | 
|  |  | 
|  | if (params->no_cck) | 
|  | flags |= IEEE80211_TX_CTL_NO_CCK_RATE; | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | if (!sdata->vif.bss_conf.ibss_joined) | 
|  | need_offchan = true; | 
|  | /* fall through */ | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | if (ieee80211_vif_is_mesh(&sdata->vif) && | 
|  | !sdata->u.mesh.mesh_id_len) | 
|  | need_offchan = true; | 
|  | /* fall through */ | 
|  | #endif | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | if (sdata->vif.type != NL80211_IFTYPE_ADHOC && | 
|  | !ieee80211_vif_is_mesh(&sdata->vif) && | 
|  | !rcu_access_pointer(sdata->bss->beacon)) | 
|  | need_offchan = true; | 
|  | if (!ieee80211_is_action(mgmt->frame_control) || | 
|  | mgmt->u.action.category == WLAN_CATEGORY_PUBLIC || | 
|  | mgmt->u.action.category == WLAN_CATEGORY_SELF_PROTECTED || | 
|  | mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) | 
|  | break; | 
|  | rcu_read_lock(); | 
|  | sta = sta_info_get(sdata, mgmt->da); | 
|  | rcu_read_unlock(); | 
|  | if (!sta) | 
|  | return -ENOLINK; | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | if (!sdata->u.mgd.associated) | 
|  | need_offchan = true; | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_DEVICE: | 
|  | need_offchan = true; | 
|  | break; | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | /* configurations requiring offchan cannot work if no channel has been | 
|  | * specified | 
|  | */ | 
|  | if (need_offchan && !params->chan) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  |  | 
|  | /* Check if the operating channel is the requested channel */ | 
|  | if (!need_offchan) { | 
|  | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
|  |  | 
|  | if (chanctx_conf) { | 
|  | need_offchan = params->chan && | 
|  | (params->chan != | 
|  | chanctx_conf->def.chan); | 
|  | } else if (!params->chan) { | 
|  | ret = -EINVAL; | 
|  | rcu_read_unlock(); | 
|  | goto out_unlock; | 
|  | } else { | 
|  | need_offchan = true; | 
|  | } | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | if (need_offchan && !params->offchan) { | 
|  | ret = -EBUSY; | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | skb = dev_alloc_skb(local->hw.extra_tx_headroom + params->len); | 
|  | if (!skb) { | 
|  | ret = -ENOMEM; | 
|  | goto out_unlock; | 
|  | } | 
|  | skb_reserve(skb, local->hw.extra_tx_headroom); | 
|  |  | 
|  | data = skb_put(skb, params->len); | 
|  | memcpy(data, params->buf, params->len); | 
|  |  | 
|  | /* Update CSA counters */ | 
|  | if (sdata->vif.csa_active && | 
|  | (sdata->vif.type == NL80211_IFTYPE_AP || | 
|  | sdata->vif.type == NL80211_IFTYPE_ADHOC) && | 
|  | params->n_csa_offsets) { | 
|  | int i; | 
|  | struct beacon_data *beacon = NULL; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) | 
|  | beacon = rcu_dereference(sdata->u.ap.beacon); | 
|  | else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) | 
|  | beacon = rcu_dereference(sdata->u.ibss.presp); | 
|  | else if (ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | beacon = rcu_dereference(sdata->u.mesh.beacon); | 
|  |  | 
|  | if (beacon) | 
|  | for (i = 0; i < params->n_csa_offsets; i++) | 
|  | data[params->csa_offsets[i]] = | 
|  | beacon->csa_current_counter; | 
|  |  | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | IEEE80211_SKB_CB(skb)->flags = flags; | 
|  |  | 
|  | skb->dev = sdata->dev; | 
|  |  | 
|  | if (!need_offchan) { | 
|  | *cookie = (unsigned long) skb; | 
|  | ieee80211_tx_skb(sdata, skb); | 
|  | ret = 0; | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_TX_OFFCHAN | | 
|  | IEEE80211_TX_INTFL_OFFCHAN_TX_OK; | 
|  | if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL) | 
|  | IEEE80211_SKB_CB(skb)->hw_queue = | 
|  | local->hw.offchannel_tx_hw_queue; | 
|  |  | 
|  | /* This will handle all kinds of coalescing and immediate TX */ | 
|  | ret = ieee80211_start_roc_work(local, sdata, params->chan, | 
|  | params->wait, cookie, skb, | 
|  | IEEE80211_ROC_TYPE_MGMT_TX); | 
|  | if (ret) | 
|  | kfree_skb(skb); | 
|  | out_unlock: | 
|  | mutex_unlock(&local->mtx); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ieee80211_mgmt_tx_cancel_wait(struct wiphy *wiphy, | 
|  | struct wireless_dev *wdev, | 
|  | u64 cookie) | 
|  | { | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  |  | 
|  | return ieee80211_cancel_roc(local, cookie, true); | 
|  | } | 
|  |  | 
|  | static void ieee80211_mgmt_frame_register(struct wiphy *wiphy, | 
|  | struct wireless_dev *wdev, | 
|  | u16 frame_type, bool reg) | 
|  | { | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  |  | 
|  | switch (frame_type) { | 
|  | case IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ: | 
|  | if (reg) | 
|  | local->probe_req_reg++; | 
|  | else | 
|  | local->probe_req_reg--; | 
|  |  | 
|  | if (!local->open_count) | 
|  | break; | 
|  |  | 
|  | ieee80211_queue_work(&local->hw, &local->reconfig_filter); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int ieee80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant) | 
|  | { | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  |  | 
|  | if (local->started) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | return drv_set_antenna(local, tx_ant, rx_ant); | 
|  | } | 
|  |  | 
|  | static int ieee80211_get_antenna(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant) | 
|  | { | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  |  | 
|  | return drv_get_antenna(local, tx_ant, rx_ant); | 
|  | } | 
|  |  | 
|  | static int ieee80211_set_rekey_data(struct wiphy *wiphy, | 
|  | struct net_device *dev, | 
|  | struct cfg80211_gtk_rekey_data *data) | 
|  | { | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | if (!local->ops->set_rekey_data) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | drv_set_rekey_data(local, sdata, data); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_probe_client(struct wiphy *wiphy, struct net_device *dev, | 
|  | const u8 *peer, u64 *cookie) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_qos_hdr *nullfunc; | 
|  | struct sk_buff *skb; | 
|  | int size = sizeof(*nullfunc); | 
|  | __le16 fc; | 
|  | bool qos; | 
|  | struct ieee80211_tx_info *info; | 
|  | struct sta_info *sta; | 
|  | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  | enum ieee80211_band band; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
|  | if (WARN_ON(!chanctx_conf)) { | 
|  | rcu_read_unlock(); | 
|  | return -EINVAL; | 
|  | } | 
|  | band = chanctx_conf->def.chan->band; | 
|  | sta = sta_info_get_bss(sdata, peer); | 
|  | if (sta) { | 
|  | qos = sta->sta.wme; | 
|  | } else { | 
|  | rcu_read_unlock(); | 
|  | return -ENOLINK; | 
|  | } | 
|  |  | 
|  | if (qos) { | 
|  | fc = cpu_to_le16(IEEE80211_FTYPE_DATA | | 
|  | IEEE80211_STYPE_QOS_NULLFUNC | | 
|  | IEEE80211_FCTL_FROMDS); | 
|  | } else { | 
|  | size -= 2; | 
|  | fc = cpu_to_le16(IEEE80211_FTYPE_DATA | | 
|  | IEEE80211_STYPE_NULLFUNC | | 
|  | IEEE80211_FCTL_FROMDS); | 
|  | } | 
|  |  | 
|  | skb = dev_alloc_skb(local->hw.extra_tx_headroom + size); | 
|  | if (!skb) { | 
|  | rcu_read_unlock(); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | skb->dev = dev; | 
|  |  | 
|  | skb_reserve(skb, local->hw.extra_tx_headroom); | 
|  |  | 
|  | nullfunc = (void *) skb_put(skb, size); | 
|  | nullfunc->frame_control = fc; | 
|  | nullfunc->duration_id = 0; | 
|  | memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN); | 
|  | memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN); | 
|  | memcpy(nullfunc->addr3, sdata->vif.addr, ETH_ALEN); | 
|  | nullfunc->seq_ctrl = 0; | 
|  |  | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  |  | 
|  | info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS | | 
|  | IEEE80211_TX_INTFL_NL80211_FRAME_TX; | 
|  | info->band = band; | 
|  |  | 
|  | skb_set_queue_mapping(skb, IEEE80211_AC_VO); | 
|  | skb->priority = 7; | 
|  | if (qos) | 
|  | nullfunc->qos_ctrl = cpu_to_le16(7); | 
|  |  | 
|  | local_bh_disable(); | 
|  | ieee80211_xmit(sdata, sta, skb); | 
|  | local_bh_enable(); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | *cookie = (unsigned long) skb; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_cfg_get_channel(struct wiphy *wiphy, | 
|  | struct wireless_dev *wdev, | 
|  | struct cfg80211_chan_def *chandef) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  | int ret = -ENODATA; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
|  | if (chanctx_conf) { | 
|  | *chandef = sdata->vif.bss_conf.chandef; | 
|  | ret = 0; | 
|  | } else if (local->open_count > 0 && | 
|  | local->open_count == local->monitors && | 
|  | sdata->vif.type == NL80211_IFTYPE_MONITOR) { | 
|  | if (local->use_chanctx) | 
|  | *chandef = local->monitor_chandef; | 
|  | else | 
|  | *chandef = local->_oper_chandef; | 
|  | ret = 0; | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static void ieee80211_set_wakeup(struct wiphy *wiphy, bool enabled) | 
|  | { | 
|  | drv_set_wakeup(wiphy_priv(wiphy), enabled); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int ieee80211_set_qos_map(struct wiphy *wiphy, | 
|  | struct net_device *dev, | 
|  | struct cfg80211_qos_map *qos_map) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct mac80211_qos_map *new_qos_map, *old_qos_map; | 
|  |  | 
|  | if (qos_map) { | 
|  | new_qos_map = kzalloc(sizeof(*new_qos_map), GFP_KERNEL); | 
|  | if (!new_qos_map) | 
|  | return -ENOMEM; | 
|  | memcpy(&new_qos_map->qos_map, qos_map, sizeof(*qos_map)); | 
|  | } else { | 
|  | /* A NULL qos_map was passed to disable QoS mapping */ | 
|  | new_qos_map = NULL; | 
|  | } | 
|  |  | 
|  | old_qos_map = sdata_dereference(sdata->qos_map, sdata); | 
|  | rcu_assign_pointer(sdata->qos_map, new_qos_map); | 
|  | if (old_qos_map) | 
|  | kfree_rcu(old_qos_map, rcu_head); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_set_ap_chanwidth(struct wiphy *wiphy, | 
|  | struct net_device *dev, | 
|  | struct cfg80211_chan_def *chandef) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | int ret; | 
|  | u32 changed = 0; | 
|  |  | 
|  | ret = ieee80211_vif_change_bandwidth(sdata, chandef, &changed); | 
|  | if (ret == 0) | 
|  | ieee80211_bss_info_change_notify(sdata, changed); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ieee80211_add_tx_ts(struct wiphy *wiphy, struct net_device *dev, | 
|  | u8 tsid, const u8 *peer, u8 up, | 
|  | u16 admitted_time) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | int ac = ieee802_1d_to_ac[up]; | 
|  |  | 
|  | if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | if (!(sdata->wmm_acm & BIT(up))) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (ifmgd->tx_tspec[ac].admitted_time) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (admitted_time) { | 
|  | ifmgd->tx_tspec[ac].admitted_time = 32 * admitted_time; | 
|  | ifmgd->tx_tspec[ac].tsid = tsid; | 
|  | ifmgd->tx_tspec[ac].up = up; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_del_tx_ts(struct wiphy *wiphy, struct net_device *dev, | 
|  | u8 tsid, const u8 *peer) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = wiphy_priv(wiphy); | 
|  | int ac; | 
|  |  | 
|  | for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | 
|  | struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac]; | 
|  |  | 
|  | /* skip unused entries */ | 
|  | if (!tx_tspec->admitted_time) | 
|  | continue; | 
|  |  | 
|  | if (tx_tspec->tsid != tsid) | 
|  | continue; | 
|  |  | 
|  | /* due to this new packets will be reassigned to non-ACM ACs */ | 
|  | tx_tspec->up = -1; | 
|  |  | 
|  | /* Make sure that all packets have been sent to avoid to | 
|  | * restore the QoS params on packets that are still on the | 
|  | * queues. | 
|  | */ | 
|  | synchronize_net(); | 
|  | ieee80211_flush_queues(local, sdata, false); | 
|  |  | 
|  | /* restore the normal QoS parameters | 
|  | * (unconditionally to avoid races) | 
|  | */ | 
|  | tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE; | 
|  | tx_tspec->downgraded = false; | 
|  | ieee80211_sta_handle_tspec_ac_params(sdata); | 
|  |  | 
|  | /* finally clear all the data */ | 
|  | memset(tx_tspec, 0, sizeof(*tx_tspec)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | const struct cfg80211_ops mac80211_config_ops = { | 
|  | .add_virtual_intf = ieee80211_add_iface, | 
|  | .del_virtual_intf = ieee80211_del_iface, | 
|  | .change_virtual_intf = ieee80211_change_iface, | 
|  | .start_p2p_device = ieee80211_start_p2p_device, | 
|  | .stop_p2p_device = ieee80211_stop_p2p_device, | 
|  | .add_key = ieee80211_add_key, | 
|  | .del_key = ieee80211_del_key, | 
|  | .get_key = ieee80211_get_key, | 
|  | .set_default_key = ieee80211_config_default_key, | 
|  | .set_default_mgmt_key = ieee80211_config_default_mgmt_key, | 
|  | .start_ap = ieee80211_start_ap, | 
|  | .change_beacon = ieee80211_change_beacon, | 
|  | .stop_ap = ieee80211_stop_ap, | 
|  | .add_station = ieee80211_add_station, | 
|  | .del_station = ieee80211_del_station, | 
|  | .change_station = ieee80211_change_station, | 
|  | .get_station = ieee80211_get_station, | 
|  | .dump_station = ieee80211_dump_station, | 
|  | .dump_survey = ieee80211_dump_survey, | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | .add_mpath = ieee80211_add_mpath, | 
|  | .del_mpath = ieee80211_del_mpath, | 
|  | .change_mpath = ieee80211_change_mpath, | 
|  | .get_mpath = ieee80211_get_mpath, | 
|  | .dump_mpath = ieee80211_dump_mpath, | 
|  | .get_mpp = ieee80211_get_mpp, | 
|  | .dump_mpp = ieee80211_dump_mpp, | 
|  | .update_mesh_config = ieee80211_update_mesh_config, | 
|  | .get_mesh_config = ieee80211_get_mesh_config, | 
|  | .join_mesh = ieee80211_join_mesh, | 
|  | .leave_mesh = ieee80211_leave_mesh, | 
|  | #endif | 
|  | .join_ocb = ieee80211_join_ocb, | 
|  | .leave_ocb = ieee80211_leave_ocb, | 
|  | .change_bss = ieee80211_change_bss, | 
|  | .set_txq_params = ieee80211_set_txq_params, | 
|  | .set_monitor_channel = ieee80211_set_monitor_channel, | 
|  | .suspend = ieee80211_suspend, | 
|  | .resume = ieee80211_resume, | 
|  | .scan = ieee80211_scan, | 
|  | .sched_scan_start = ieee80211_sched_scan_start, | 
|  | .sched_scan_stop = ieee80211_sched_scan_stop, | 
|  | .auth = ieee80211_auth, | 
|  | .assoc = ieee80211_assoc, | 
|  | .deauth = ieee80211_deauth, | 
|  | .disassoc = ieee80211_disassoc, | 
|  | .join_ibss = ieee80211_join_ibss, | 
|  | .leave_ibss = ieee80211_leave_ibss, | 
|  | .set_mcast_rate = ieee80211_set_mcast_rate, | 
|  | .set_wiphy_params = ieee80211_set_wiphy_params, | 
|  | .set_tx_power = ieee80211_set_tx_power, | 
|  | .get_tx_power = ieee80211_get_tx_power, | 
|  | .set_wds_peer = ieee80211_set_wds_peer, | 
|  | .rfkill_poll = ieee80211_rfkill_poll, | 
|  | CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd) | 
|  | CFG80211_TESTMODE_DUMP(ieee80211_testmode_dump) | 
|  | .set_power_mgmt = ieee80211_set_power_mgmt, | 
|  | .set_bitrate_mask = ieee80211_set_bitrate_mask, | 
|  | .remain_on_channel = ieee80211_remain_on_channel, | 
|  | .cancel_remain_on_channel = ieee80211_cancel_remain_on_channel, | 
|  | .mgmt_tx = ieee80211_mgmt_tx, | 
|  | .mgmt_tx_cancel_wait = ieee80211_mgmt_tx_cancel_wait, | 
|  | .set_cqm_rssi_config = ieee80211_set_cqm_rssi_config, | 
|  | .mgmt_frame_register = ieee80211_mgmt_frame_register, | 
|  | .set_antenna = ieee80211_set_antenna, | 
|  | .get_antenna = ieee80211_get_antenna, | 
|  | .set_rekey_data = ieee80211_set_rekey_data, | 
|  | .tdls_oper = ieee80211_tdls_oper, | 
|  | .tdls_mgmt = ieee80211_tdls_mgmt, | 
|  | .tdls_channel_switch = ieee80211_tdls_channel_switch, | 
|  | .tdls_cancel_channel_switch = ieee80211_tdls_cancel_channel_switch, | 
|  | .probe_client = ieee80211_probe_client, | 
|  | .set_noack_map = ieee80211_set_noack_map, | 
|  | #ifdef CONFIG_PM | 
|  | .set_wakeup = ieee80211_set_wakeup, | 
|  | #endif | 
|  | .get_channel = ieee80211_cfg_get_channel, | 
|  | .start_radar_detection = ieee80211_start_radar_detection, | 
|  | .channel_switch = ieee80211_channel_switch, | 
|  | .set_qos_map = ieee80211_set_qos_map, | 
|  | .set_ap_chanwidth = ieee80211_set_ap_chanwidth, | 
|  | .add_tx_ts = ieee80211_add_tx_ts, | 
|  | .del_tx_ts = ieee80211_del_tx_ts, | 
|  | }; |