| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Device Tree file for the Gemini-based Raidsonic NAS IB-4220-B |
| */ |
| |
| /dts-v1/; |
| |
| #include "gemini.dtsi" |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| model = "Raidsonic NAS IB-4220-B"; |
| compatible = "raidsonic,ib-4220-b", "cortina,gemini"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| memory { /* 128 MB */ |
| device_type = "memory"; |
| reg = <0x00000000 0x8000000>; |
| }; |
| |
| chosen { |
| bootargs = "console=ttyS0,19200n8"; |
| stdout-path = &uart0; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| button@29 { |
| debounce_interval = <50>; |
| wakeup-source; |
| linux,code = <KEY_SETUP>; |
| label = "Backup button"; |
| /* Conflict with TVC */ |
| gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; |
| }; |
| button@31 { |
| debounce_interval = <50>; |
| wakeup-source; |
| linux,code = <KEY_RESTART>; |
| label = "Softreset button"; |
| /* Conflict with TVC */ |
| gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| led@28 { |
| label = "nas4220b:orange:hdd"; |
| /* Conflict with TVC */ |
| gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; |
| default-state = "on"; |
| }; |
| led@30 { |
| label = "nas4220b:green:os"; |
| /* Conflict with TVC */ |
| gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; |
| default-state = "on"; |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| |
| soc { |
| flash@30000000 { |
| status = "okay"; |
| /* 16MB of flash */ |
| reg = <0x30000000 0x01000000>; |
| |
| partition@0 { |
| label = "RedBoot"; |
| reg = <0x00000000 0x00020000>; |
| read-only; |
| }; |
| partition@20000 { |
| label = "Kernel"; |
| reg = <0x00020000 0x00300000>; |
| }; |
| partition@320000 { |
| label = "Ramdisk"; |
| reg = <0x00320000 0x00600000>; |
| }; |
| partition@920000 { |
| label = "Application"; |
| reg = <0x00920000 0x00600000>; |
| }; |
| partition@f20000 { |
| label = "VCTL"; |
| reg = <0x00f20000 0x00020000>; |
| read-only; |
| }; |
| partition@f40000 { |
| label = "CurConf"; |
| reg = <0x00f40000 0x000a0000>; |
| read-only; |
| }; |
| partition@fe0000 { |
| label = "FIS directory"; |
| reg = <0x00fe0000 0x00020000>; |
| read-only; |
| }; |
| }; |
| |
| syscon: syscon@40000000 { |
| pinctrl { |
| /* |
| * gpio1dgrp cover line 28-31 otherwise used |
| * by TVC. |
| */ |
| gpio1_default_pins: pinctrl-gpio1 { |
| mux { |
| function = "gpio1"; |
| groups = "gpio1dgrp"; |
| }; |
| }; |
| }; |
| }; |
| |
| sata: sata@46000000 { |
| cortina,gemini-ata-muxmode = <0>; |
| cortina,gemini-enable-sata-bridge; |
| status = "okay"; |
| }; |
| |
| gpio1: gpio@4e000000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio1_default_pins>; |
| }; |
| |
| ata@63000000 { |
| status = "okay"; |
| }; |
| }; |
| }; |