| /* |
| * B53 register access through MII registers |
| * |
| * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org> |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/phy.h> |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/brcmphy.h> |
| #include <linux/rtnetlink.h> |
| #include <net/dsa.h> |
| |
| #include "b53_priv.h" |
| |
| /* MII registers */ |
| #define REG_MII_PAGE 0x10 /* MII Page register */ |
| #define REG_MII_ADDR 0x11 /* MII Address register */ |
| #define REG_MII_DATA0 0x18 /* MII Data register 0 */ |
| #define REG_MII_DATA1 0x19 /* MII Data register 1 */ |
| #define REG_MII_DATA2 0x1a /* MII Data register 2 */ |
| #define REG_MII_DATA3 0x1b /* MII Data register 3 */ |
| |
| #define REG_MII_PAGE_ENABLE BIT(0) |
| #define REG_MII_ADDR_WRITE BIT(0) |
| #define REG_MII_ADDR_READ BIT(1) |
| |
| static int b53_mdio_op(struct b53_device *dev, u8 page, u8 reg, u16 op) |
| { |
| int i; |
| u16 v; |
| int ret; |
| struct mii_bus *bus = dev->priv; |
| |
| if (dev->current_page != page) { |
| /* set page number */ |
| v = (page << 8) | REG_MII_PAGE_ENABLE; |
| ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, |
| REG_MII_PAGE, v); |
| if (ret) |
| return ret; |
| dev->current_page = page; |
| } |
| |
| /* set register address */ |
| v = (reg << 8) | op; |
| ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_ADDR, v); |
| if (ret) |
| return ret; |
| |
| /* check if operation completed */ |
| for (i = 0; i < 5; ++i) { |
| v = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, |
| REG_MII_ADDR); |
| if (!(v & (REG_MII_ADDR_WRITE | REG_MII_ADDR_READ))) |
| break; |
| usleep_range(10, 100); |
| } |
| |
| if (WARN_ON(i == 5)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int b53_mdio_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val) |
| { |
| struct mii_bus *bus = dev->priv; |
| int ret; |
| |
| ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); |
| if (ret) |
| return ret; |
| |
| *val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, |
| REG_MII_DATA0) & 0xff; |
| |
| return 0; |
| } |
| |
| static int b53_mdio_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val) |
| { |
| struct mii_bus *bus = dev->priv; |
| int ret; |
| |
| ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); |
| if (ret) |
| return ret; |
| |
| *val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0); |
| |
| return 0; |
| } |
| |
| static int b53_mdio_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val) |
| { |
| struct mii_bus *bus = dev->priv; |
| int ret; |
| |
| ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); |
| if (ret) |
| return ret; |
| |
| *val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0); |
| *val |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, |
| REG_MII_DATA1) << 16; |
| |
| return 0; |
| } |
| |
| static int b53_mdio_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val) |
| { |
| struct mii_bus *bus = dev->priv; |
| u64 temp = 0; |
| int i; |
| int ret; |
| |
| ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); |
| if (ret) |
| return ret; |
| |
| for (i = 2; i >= 0; i--) { |
| temp <<= 16; |
| temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, |
| REG_MII_DATA0 + i); |
| } |
| |
| *val = temp; |
| |
| return 0; |
| } |
| |
| static int b53_mdio_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val) |
| { |
| struct mii_bus *bus = dev->priv; |
| u64 temp = 0; |
| int i; |
| int ret; |
| |
| ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ); |
| if (ret) |
| return ret; |
| |
| for (i = 3; i >= 0; i--) { |
| temp <<= 16; |
| temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, |
| REG_MII_DATA0 + i); |
| } |
| |
| *val = temp; |
| |
| return 0; |
| } |
| |
| static int b53_mdio_write8(struct b53_device *dev, u8 page, u8 reg, u8 value) |
| { |
| struct mii_bus *bus = dev->priv; |
| int ret; |
| |
| ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, |
| REG_MII_DATA0, value); |
| if (ret) |
| return ret; |
| |
| return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); |
| } |
| |
| static int b53_mdio_write16(struct b53_device *dev, u8 page, u8 reg, |
| u16 value) |
| { |
| struct mii_bus *bus = dev->priv; |
| int ret; |
| |
| ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, |
| REG_MII_DATA0, value); |
| if (ret) |
| return ret; |
| |
| return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); |
| } |
| |
| static int b53_mdio_write32(struct b53_device *dev, u8 page, u8 reg, |
| u32 value) |
| { |
| struct mii_bus *bus = dev->priv; |
| unsigned int i; |
| u32 temp = value; |
| |
| for (i = 0; i < 2; i++) { |
| int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, |
| REG_MII_DATA0 + i, |
| temp & 0xffff); |
| if (ret) |
| return ret; |
| temp >>= 16; |
| } |
| |
| return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); |
| } |
| |
| static int b53_mdio_write48(struct b53_device *dev, u8 page, u8 reg, |
| u64 value) |
| { |
| struct mii_bus *bus = dev->priv; |
| unsigned int i; |
| u64 temp = value; |
| |
| for (i = 0; i < 3; i++) { |
| int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, |
| REG_MII_DATA0 + i, |
| temp & 0xffff); |
| if (ret) |
| return ret; |
| temp >>= 16; |
| } |
| |
| return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); |
| } |
| |
| static int b53_mdio_write64(struct b53_device *dev, u8 page, u8 reg, |
| u64 value) |
| { |
| struct mii_bus *bus = dev->priv; |
| unsigned int i; |
| u64 temp = value; |
| |
| for (i = 0; i < 4; i++) { |
| int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, |
| REG_MII_DATA0 + i, |
| temp & 0xffff); |
| if (ret) |
| return ret; |
| temp >>= 16; |
| } |
| |
| return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE); |
| } |
| |
| static int b53_mdio_phy_read16(struct b53_device *dev, int addr, int reg, |
| u16 *value) |
| { |
| struct mii_bus *bus = dev->priv; |
| |
| *value = mdiobus_read_nested(bus, addr, reg); |
| |
| return 0; |
| } |
| |
| static int b53_mdio_phy_write16(struct b53_device *dev, int addr, int reg, |
| u16 value) |
| { |
| struct mii_bus *bus = dev->bus; |
| |
| return mdiobus_write_nested(bus, addr, reg, value); |
| } |
| |
| static const struct b53_io_ops b53_mdio_ops = { |
| .read8 = b53_mdio_read8, |
| .read16 = b53_mdio_read16, |
| .read32 = b53_mdio_read32, |
| .read48 = b53_mdio_read48, |
| .read64 = b53_mdio_read64, |
| .write8 = b53_mdio_write8, |
| .write16 = b53_mdio_write16, |
| .write32 = b53_mdio_write32, |
| .write48 = b53_mdio_write48, |
| .write64 = b53_mdio_write64, |
| .phy_read16 = b53_mdio_phy_read16, |
| .phy_write16 = b53_mdio_phy_write16, |
| }; |
| |
| #define B53_BRCM_OUI_1 0x0143bc00 |
| #define B53_BRCM_OUI_2 0x03625c00 |
| #define B53_BRCM_OUI_3 0x00406000 |
| |
| static int b53_mdio_probe(struct mdio_device *mdiodev) |
| { |
| struct b53_device *dev; |
| u32 phy_id; |
| int ret; |
| |
| /* allow the generic PHY driver to take over the non-management MDIO |
| * addresses |
| */ |
| if (mdiodev->addr != BRCM_PSEUDO_PHY_ADDR && mdiodev->addr != 0) { |
| dev_err(&mdiodev->dev, "leaving address %d to PHY\n", |
| mdiodev->addr); |
| return -ENODEV; |
| } |
| |
| /* read the first port's id */ |
| phy_id = mdiobus_read(mdiodev->bus, 0, 2) << 16; |
| phy_id |= mdiobus_read(mdiodev->bus, 0, 3); |
| |
| /* BCM5325, BCM539x (OUI_1) |
| * BCM53125, BCM53128 (OUI_2) |
| * BCM5365 (OUI_3) |
| */ |
| if ((phy_id & 0xfffffc00) != B53_BRCM_OUI_1 && |
| (phy_id & 0xfffffc00) != B53_BRCM_OUI_2 && |
| (phy_id & 0xfffffc00) != B53_BRCM_OUI_3) { |
| dev_err(&mdiodev->dev, "Unsupported device: 0x%08x\n", phy_id); |
| return -ENODEV; |
| } |
| |
| /* First probe will come from SWITCH_MDIO controller on the 7445D0 |
| * switch, which will conflict with the 7445 integrated switch |
| * pseudo-phy (we end-up programming both). In that case, we return |
| * -EPROBE_DEFER for the first time we get here, and wait until we come |
| * back with the slave MDIO bus which has the correct indirection |
| * layer setup |
| */ |
| if (of_machine_is_compatible("brcm,bcm7445d0") && |
| strcmp(mdiodev->bus->name, "sf2 slave mii")) |
| return -EPROBE_DEFER; |
| |
| dev = b53_switch_alloc(&mdiodev->dev, &b53_mdio_ops, mdiodev->bus); |
| if (!dev) |
| return -ENOMEM; |
| |
| /* we don't use page 0xff, so force a page set */ |
| dev->current_page = 0xff; |
| dev->bus = mdiodev->bus; |
| |
| dev_set_drvdata(&mdiodev->dev, dev); |
| |
| ret = b53_switch_register(dev); |
| if (ret) { |
| dev_err(&mdiodev->dev, "failed to register switch: %i\n", ret); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static void b53_mdio_remove(struct mdio_device *mdiodev) |
| { |
| struct b53_device *dev = dev_get_drvdata(&mdiodev->dev); |
| struct dsa_switch *ds = dev->ds; |
| |
| dsa_unregister_switch(ds); |
| } |
| |
| static const struct of_device_id b53_of_match[] = { |
| { .compatible = "brcm,bcm5325" }, |
| { .compatible = "brcm,bcm53115" }, |
| { .compatible = "brcm,bcm53125" }, |
| { .compatible = "brcm,bcm53128" }, |
| { .compatible = "brcm,bcm5365" }, |
| { .compatible = "brcm,bcm5395" }, |
| { .compatible = "brcm,bcm5397" }, |
| { .compatible = "brcm,bcm5398" }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, b53_of_match); |
| |
| static struct mdio_driver b53_mdio_driver = { |
| .probe = b53_mdio_probe, |
| .remove = b53_mdio_remove, |
| .mdiodrv.driver = { |
| .name = "bcm53xx", |
| .of_match_table = b53_of_match, |
| }, |
| }; |
| |
| static int __init b53_mdio_driver_register(void) |
| { |
| return mdio_driver_register(&b53_mdio_driver); |
| } |
| module_init(b53_mdio_driver_register); |
| |
| static void __exit b53_mdio_driver_unregister(void) |
| { |
| mdio_driver_unregister(&b53_mdio_driver); |
| } |
| module_exit(b53_mdio_driver_unregister); |
| |
| MODULE_DESCRIPTION("B53 MDIO access driver"); |
| MODULE_LICENSE("Dual BSD/GPL"); |