| /* | |
| * Generic entry point for the idle threads | |
| */ | |
| #include <linux/sched.h> | |
| #include <linux/cpu.h> | |
| #include <linux/cpuidle.h> | |
| #include <linux/tick.h> | |
| #include <linux/mm.h> | |
| #include <linux/stackprotector.h> | |
| #include <asm/tlb.h> | |
| #include <trace/events/power.h> | |
| static int __read_mostly cpu_idle_force_poll; | |
| void cpu_idle_poll_ctrl(bool enable) | |
| { | |
| if (enable) { | |
| cpu_idle_force_poll++; | |
| } else { | |
| cpu_idle_force_poll--; | |
| WARN_ON_ONCE(cpu_idle_force_poll < 0); | |
| } | |
| } | |
| #ifdef CONFIG_GENERIC_IDLE_POLL_SETUP | |
| static int __init cpu_idle_poll_setup(char *__unused) | |
| { | |
| cpu_idle_force_poll = 1; | |
| return 1; | |
| } | |
| __setup("nohlt", cpu_idle_poll_setup); | |
| static int __init cpu_idle_nopoll_setup(char *__unused) | |
| { | |
| cpu_idle_force_poll = 0; | |
| return 1; | |
| } | |
| __setup("hlt", cpu_idle_nopoll_setup); | |
| #endif | |
| static inline int cpu_idle_poll(void) | |
| { | |
| rcu_idle_enter(); | |
| trace_cpu_idle_rcuidle(0, smp_processor_id()); | |
| local_irq_enable(); | |
| while (!tif_need_resched()) | |
| cpu_relax(); | |
| trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id()); | |
| rcu_idle_exit(); | |
| return 1; | |
| } | |
| /* Weak implementations for optional arch specific functions */ | |
| void __weak arch_cpu_idle_prepare(void) { } | |
| void __weak arch_cpu_idle_enter(void) { } | |
| void __weak arch_cpu_idle_exit(void) { } | |
| void __weak arch_cpu_idle_dead(void) { } | |
| void __weak arch_cpu_idle(void) | |
| { | |
| cpu_idle_force_poll = 1; | |
| local_irq_enable(); | |
| } | |
| /** | |
| * cpuidle_idle_call - the main idle function | |
| * | |
| * NOTE: no locks or semaphores should be used here | |
| * return non-zero on failure | |
| */ | |
| static int cpuidle_idle_call(void) | |
| { | |
| struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices); | |
| struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev); | |
| int next_state, entered_state, ret; | |
| bool broadcast; | |
| /* | |
| * Check if the idle task must be rescheduled. If it is the | |
| * case, exit the function after re-enabling the local irq and | |
| * set again the polling flag | |
| */ | |
| if (current_clr_polling_and_test()) { | |
| local_irq_enable(); | |
| __current_set_polling(); | |
| return 0; | |
| } | |
| /* | |
| * During the idle period, stop measuring the disabled irqs | |
| * critical sections latencies | |
| */ | |
| stop_critical_timings(); | |
| /* | |
| * Tell the RCU framework we are entering an idle section, | |
| * so no more rcu read side critical sections and one more | |
| * step to the grace period | |
| */ | |
| rcu_idle_enter(); | |
| /* | |
| * Check if the cpuidle framework is ready, otherwise fallback | |
| * to the default arch specific idle method | |
| */ | |
| ret = cpuidle_enabled(drv, dev); | |
| if (!ret) { | |
| /* | |
| * Ask the governor to choose an idle state it thinks | |
| * it is convenient to go to. There is *always* a | |
| * convenient idle state | |
| */ | |
| next_state = cpuidle_select(drv, dev); | |
| /* | |
| * The idle task must be scheduled, it is pointless to | |
| * go to idle, just update no idle residency and get | |
| * out of this function | |
| */ | |
| if (current_clr_polling_and_test()) { | |
| dev->last_residency = 0; | |
| entered_state = next_state; | |
| local_irq_enable(); | |
| } else { | |
| broadcast = !!(drv->states[next_state].flags & | |
| CPUIDLE_FLAG_TIMER_STOP); | |
| if (broadcast) | |
| /* | |
| * Tell the time framework to switch | |
| * to a broadcast timer because our | |
| * local timer will be shutdown. If a | |
| * local timer is used from another | |
| * cpu as a broadcast timer, this call | |
| * may fail if it is not available | |
| */ | |
| ret = clockevents_notify( | |
| CLOCK_EVT_NOTIFY_BROADCAST_ENTER, | |
| &dev->cpu); | |
| if (!ret) { | |
| trace_cpu_idle_rcuidle(next_state, dev->cpu); | |
| /* | |
| * Enter the idle state previously | |
| * returned by the governor | |
| * decision. This function will block | |
| * until an interrupt occurs and will | |
| * take care of re-enabling the local | |
| * interrupts | |
| */ | |
| entered_state = cpuidle_enter(drv, dev, | |
| next_state); | |
| trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, | |
| dev->cpu); | |
| if (broadcast) | |
| clockevents_notify( | |
| CLOCK_EVT_NOTIFY_BROADCAST_EXIT, | |
| &dev->cpu); | |
| /* | |
| * Give the governor an opportunity to reflect on the | |
| * outcome | |
| */ | |
| cpuidle_reflect(dev, entered_state); | |
| } | |
| } | |
| } | |
| /* | |
| * We can't use the cpuidle framework, let's use the default | |
| * idle routine | |
| */ | |
| if (ret) | |
| arch_cpu_idle(); | |
| __current_set_polling(); | |
| /* | |
| * It is up to the idle functions to enable back the local | |
| * interrupt | |
| */ | |
| if (WARN_ON_ONCE(irqs_disabled())) | |
| local_irq_enable(); | |
| rcu_idle_exit(); | |
| start_critical_timings(); | |
| return 0; | |
| } | |
| /* | |
| * Generic idle loop implementation | |
| */ | |
| static void cpu_idle_loop(void) | |
| { | |
| while (1) { | |
| tick_nohz_idle_enter(); | |
| while (!need_resched()) { | |
| check_pgt_cache(); | |
| rmb(); | |
| if (cpu_is_offline(smp_processor_id())) | |
| arch_cpu_idle_dead(); | |
| local_irq_disable(); | |
| arch_cpu_idle_enter(); | |
| /* | |
| * In poll mode we reenable interrupts and spin. | |
| * | |
| * Also if we detected in the wakeup from idle | |
| * path that the tick broadcast device expired | |
| * for us, we don't want to go deep idle as we | |
| * know that the IPI is going to arrive right | |
| * away | |
| */ | |
| if (cpu_idle_force_poll || tick_check_broadcast_expired()) | |
| cpu_idle_poll(); | |
| else | |
| cpuidle_idle_call(); | |
| arch_cpu_idle_exit(); | |
| } | |
| /* | |
| * Since we fell out of the loop above, we know | |
| * TIF_NEED_RESCHED must be set, propagate it into | |
| * PREEMPT_NEED_RESCHED. | |
| * | |
| * This is required because for polling idle loops we will | |
| * not have had an IPI to fold the state for us. | |
| */ | |
| preempt_set_need_resched(); | |
| tick_nohz_idle_exit(); | |
| schedule_preempt_disabled(); | |
| } | |
| } | |
| void cpu_startup_entry(enum cpuhp_state state) | |
| { | |
| /* | |
| * This #ifdef needs to die, but it's too late in the cycle to | |
| * make this generic (arm and sh have never invoked the canary | |
| * init for the non boot cpus!). Will be fixed in 3.11 | |
| */ | |
| #ifdef CONFIG_X86 | |
| /* | |
| * If we're the non-boot CPU, nothing set the stack canary up | |
| * for us. The boot CPU already has it initialized but no harm | |
| * in doing it again. This is a good place for updating it, as | |
| * we wont ever return from this function (so the invalid | |
| * canaries already on the stack wont ever trigger). | |
| */ | |
| boot_init_stack_canary(); | |
| #endif | |
| __current_set_polling(); | |
| arch_cpu_idle_prepare(); | |
| cpu_idle_loop(); | |
| } |