arch/arm64/boot/dts/freescale/fsl-imx8qxp-mek-ov5640.dtsi

&iomuxc {
	imx8qxp-mek {
		pinctrl_mipi_csi0: mipicsi0grp{
			fsl,pins = <
				SC_P_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT	0xC0000041
				SC_P_MIPI_CSI0_GPIO0_01_LSIO_GPIO3_IO07		0xC0000041
				SC_P_MIPI_CSI0_GPIO0_00_LSIO_GPIO3_IO08		0xC0000041
			>;
		};

		pinctrl_parallel_csi: parallelcsigrp {
			fsl,pins = <
				SC_P_CSI_D00_CI_PI_D02		0xC0000041
				SC_P_CSI_D01_CI_PI_D03		0xC0000041
				SC_P_CSI_D02_CI_PI_D04		0xC0000041
				SC_P_CSI_D03_CI_PI_D05		0xC0000041
				SC_P_CSI_D04_CI_PI_D06		0xC0000041
				SC_P_CSI_D05_CI_PI_D07		0xC0000041
				SC_P_CSI_D06_CI_PI_D08		0xC0000041
				SC_P_CSI_D07_CI_PI_D09		0xC0000041

				SC_P_CSI_MCLK_CI_PI_MCLK		0xC0000041
				SC_P_CSI_PCLK_CI_PI_PCLK		0xC0000041
				SC_P_CSI_HSYNC_CI_PI_HSYNC		0xC0000041
				SC_P_CSI_VSYNC_CI_PI_VSYNC		0xC0000041
				SC_P_CSI_EN_LSIO_GPIO3_IO02		0xC0000041
				SC_P_CSI_RESET_LSIO_GPIO3_IO03	0xC0000041
			>;
		};
	};
};

&isi_0 {
	interface = <6 0 2>;	/* INPUT: 6-PARALLEL CSI */
	parallel_csi;
	status = "okay";
};

&cameradev {
	parallel_csi;
	status = "okay";
};

&parallel_csi {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";
	port@0 {
		reg = <0>;
		parallel_csi_ep: endpoint {
			remote-endpoint = <&ov5640_ep>;
		};
	};
};

&isi_2 {
	interface = <2 0 2>;
	status = "okay";
};

&isi_1 {
	status = "disabled";
};

&isi_3 {
	status = "disabled";
};

&isi_4 {
	status = "disabled";
};

&isi_5 {
	status = "disabled";
};

&isi_6 {
	status = "disabled";
};

&isi_7 {
	status = "disabled";
};

&i2c0_csi0 {
	clock-frequency = <100000>;
	status = "okay";

	ov5640_mipi: ov5640_mipi@3c {
		compatible = "ovti,ov5640_mipi_v3";
		reg = <0x3c>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_mipi_csi0>;
		clocks = <&clk IMX8QXP_24MHZ>;
		clock-names = "csi_mclk";
		csi_id = <0>;
		pwn-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
		rst-gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
		mclk = <24000000>;
		mclk_source = <0>;
		mipi_csi;
		status = "okay";
		port {
			ov5640_mipi_ep: endpoint {
				remote-endpoint = <&mipi_csi0_ep>;
			};
		};
	};

	max9286_mipi@6A {
		status = "disabled";
	};
};

&mipi_csi_0 {
	/delete-property/virtual-channel;
	status = "okay";

	port@0 {
		reg = <0>;
		mipi_csi0_ep: endpoint {
			remote-endpoint = <&ov5640_mipi_ep>;
			data-lanes = <1 2>;
		};
	};
};