| OMAP HS USB EHCI controller |
| |
| This device is usually the child of the omap-usb-host |
| Documentation/devicetree/bindings/mfd/omap-usb-host.txt |
| |
| Required properties: |
| |
| - compatible: should be "ti,ehci-omap" |
| - reg: should contain one register range i.e. start and length |
| - interrupts: description of the interrupt line |
| |
| Optional properties: |
| |
| - phys: list of phandles to PHY nodes. |
| This property is required if at least one of the ports are in |
| PHY mode i.e. OMAP_EHCI_PORT_MODE_PHY |
| |
| To specify the port mode, see |
| Documentation/devicetree/bindings/mfd/omap-usb-host.txt |
| |
| Example for OMAP4: |
| |
| usbhsehci: ehci@4a064c00 { |
| compatible = "ti,ehci-omap"; |
| reg = <0x4a064c00 0x400>; |
| interrupts = <0 77 0x4>; |
| }; |
| |
| &usbhsehci { |
| phys = <&hsusb1_phy 0 &hsusb3_phy>; |
| }; |
