| LSI Axxia I2C |
| |
| Required properties : |
| - compatible : Must be "lsi,api2c" |
| - reg : Offset and length of the register set for the device |
| - interrupts : the interrupt specifier |
| - #address-cells : Must be <1>; |
| - #size-cells : Must be <0>; |
| - clock-names : Must contain "i2c". |
| - clocks: Must contain an entry for each name in clock-names. See the common |
| clock bindings. |
| |
| Optional properties : |
| - clock-frequency : Desired I2C bus clock frequency in Hz. If not specified, |
| the default 100 kHz frequency will be used. As only Normal and Fast modes |
| are supported, possible values are 100000 and 400000. |
| |
| Example : |
| |
| i2c@02010084000 { |
| compatible = "lsi,api2c"; |
| device_type = "i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x20 0x10084000 0x00 0x1000>; |
| interrupts = <0 19 4>; |
| clocks = <&clk_per>; |
| clock-names = "i2c"; |
| clock-frequency = <400000>; |
| }; |
