| PTN5150 Extcon device |
| |
| NXP PTN5150 is an i2c interface Type-C application chip, it can detect |
| CC flip, attach and detech, the user can get these events through |
| i2c registers by GPIO interrupt. |
| |
| Required properties: |
| - compatible: Should be "nxp,ptn5150" |
| - connect-gpios: gpio interrupt for attach and detach events. |
| - reg: i2c slave address |
| |
| Example: |
| &i2c1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpi2c1>; |
| status = "okay"; |
| |
| typec_ptn5150: typec@3d { |
| compatible = "nxp,ptn5150"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ptn5150>; |
| reg = <0x3d>; |
| connect-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
