| /* |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * Copyright(c) 2012 Intel Corporation. All rights reserved. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * The full GNU General Public License is included in this distribution |
| * in the file called LICENSE.GPL. |
| * |
| * BSD LICENSE |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /* |
| * Supports the SMBus Message Transport (SMT) in the Intel Atom Processor |
| * S12xx Product Family. |
| * |
| * Features supported by this driver: |
| * Hardware PEC yes |
| * Block buffer yes |
| * Block process call transaction no |
| * Slave mode no |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| #include <linux/stddef.h> |
| #include <linux/completion.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/i2c.h> |
| #include <linux/acpi.h> |
| #include <linux/interrupt.h> |
| |
| #include <linux/io-64-nonatomic-lo-hi.h> |
| |
| /* PCI Address Constants */ |
| #define SMBBAR 0 |
| |
| /* PCI DIDs for the Intel SMBus Message Transport (SMT) Devices */ |
| #define PCI_DEVICE_ID_INTEL_S1200_SMT0 0x0c59 |
| #define PCI_DEVICE_ID_INTEL_S1200_SMT1 0x0c5a |
| #define PCI_DEVICE_ID_INTEL_DNV_SMT 0x19ac |
| #define PCI_DEVICE_ID_INTEL_AVOTON_SMT 0x1f15 |
| |
| #define ISMT_DESC_ENTRIES 2 /* number of descriptor entries */ |
| #define ISMT_MAX_RETRIES 3 /* number of SMBus retries to attempt */ |
| |
| /* Hardware Descriptor Constants - Control Field */ |
| #define ISMT_DESC_CWRL 0x01 /* Command/Write Length */ |
| #define ISMT_DESC_BLK 0X04 /* Perform Block Transaction */ |
| #define ISMT_DESC_FAIR 0x08 /* Set fairness flag upon successful arbit. */ |
| #define ISMT_DESC_PEC 0x10 /* Packet Error Code */ |
| #define ISMT_DESC_I2C 0x20 /* I2C Enable */ |
| #define ISMT_DESC_INT 0x40 /* Interrupt */ |
| #define ISMT_DESC_SOE 0x80 /* Stop On Error */ |
| |
| /* Hardware Descriptor Constants - Status Field */ |
| #define ISMT_DESC_SCS 0x01 /* Success */ |
| #define ISMT_DESC_DLTO 0x04 /* Data Low Time Out */ |
| #define ISMT_DESC_NAK 0x08 /* NAK Received */ |
| #define ISMT_DESC_CRC 0x10 /* CRC Error */ |
| #define ISMT_DESC_CLTO 0x20 /* Clock Low Time Out */ |
| #define ISMT_DESC_COL 0x40 /* Collisions */ |
| #define ISMT_DESC_LPR 0x80 /* Large Packet Received */ |
| |
| /* Macros */ |
| #define ISMT_DESC_ADDR_RW(addr, rw) (((addr) << 1) | (rw)) |
| |
| /* iSMT General Register address offsets (SMBBAR + <addr>) */ |
| #define ISMT_GR_GCTRL 0x000 /* General Control */ |
| #define ISMT_GR_SMTICL 0x008 /* SMT Interrupt Cause Location */ |
| #define ISMT_GR_ERRINTMSK 0x010 /* Error Interrupt Mask */ |
| #define ISMT_GR_ERRAERMSK 0x014 /* Error AER Mask */ |
| #define ISMT_GR_ERRSTS 0x018 /* Error Status */ |
| #define ISMT_GR_ERRINFO 0x01c /* Error Information */ |
| |
| /* iSMT Master Registers */ |
| #define ISMT_MSTR_MDBA 0x100 /* Master Descriptor Base Address */ |
| #define ISMT_MSTR_MCTRL 0x108 /* Master Control */ |
| #define ISMT_MSTR_MSTS 0x10c /* Master Status */ |
| #define ISMT_MSTR_MDS 0x110 /* Master Descriptor Size */ |
| #define ISMT_MSTR_RPOLICY 0x114 /* Retry Policy */ |
| |
| /* iSMT Miscellaneous Registers */ |
| #define ISMT_SPGT 0x300 /* SMBus PHY Global Timing */ |
| |
| /* General Control Register (GCTRL) bit definitions */ |
| #define ISMT_GCTRL_TRST 0x04 /* Target Reset */ |
| #define ISMT_GCTRL_KILL 0x08 /* Kill */ |
| #define ISMT_GCTRL_SRST 0x40 /* Soft Reset */ |
| |
| /* Master Control Register (MCTRL) bit definitions */ |
| #define ISMT_MCTRL_SS 0x01 /* Start/Stop */ |
| #define ISMT_MCTRL_MEIE 0x10 /* Master Error Interrupt Enable */ |
| #define ISMT_MCTRL_FMHP 0x00ff0000 /* Firmware Master Head Ptr (FMHP) */ |
| |
| /* Master Status Register (MSTS) bit definitions */ |
| #define ISMT_MSTS_HMTP 0xff0000 /* HW Master Tail Pointer (HMTP) */ |
| #define ISMT_MSTS_MIS 0x20 /* Master Interrupt Status (MIS) */ |
| #define ISMT_MSTS_MEIS 0x10 /* Master Error Int Status (MEIS) */ |
| #define ISMT_MSTS_IP 0x01 /* In Progress */ |
| |
| /* Master Descriptor Size (MDS) bit definitions */ |
| #define ISMT_MDS_MASK 0xff /* Master Descriptor Size mask (MDS) */ |
| |
| /* SMBus PHY Global Timing Register (SPGT) bit definitions */ |
| #define ISMT_SPGT_SPD_MASK 0xc0000000 /* SMBus Speed mask */ |
| #define ISMT_SPGT_SPD_80K 0x00 /* 80 kHz */ |
| #define ISMT_SPGT_SPD_100K (0x1 << 30) /* 100 kHz */ |
| #define ISMT_SPGT_SPD_400K (0x2 << 30) /* 400 kHz */ |
| #define ISMT_SPGT_SPD_1M (0x3 << 30) /* 1 MHz */ |
| |
| |
| /* MSI Control Register (MSICTL) bit definitions */ |
| #define ISMT_MSICTL_MSIE 0x01 /* MSI Enable */ |
| |
| /* iSMT Hardware Descriptor */ |
| struct ismt_desc { |
| u8 tgtaddr_rw; /* target address & r/w bit */ |
| u8 wr_len_cmd; /* write length in bytes or a command */ |
| u8 rd_len; /* read length */ |
| u8 control; /* control bits */ |
| u8 status; /* status bits */ |
| u8 retry; /* collision retry and retry count */ |
| u8 rxbytes; /* received bytes */ |
| u8 txbytes; /* transmitted bytes */ |
| u32 dptr_low; /* lower 32 bit of the data pointer */ |
| u32 dptr_high; /* upper 32 bit of the data pointer */ |
| } __packed; |
| |
| struct ismt_priv { |
| struct i2c_adapter adapter; |
| void __iomem *smba; /* PCI BAR */ |
| struct pci_dev *pci_dev; |
| struct ismt_desc *hw; /* descriptor virt base addr */ |
| dma_addr_t io_rng_dma; /* descriptor HW base addr */ |
| u8 head; /* ring buffer head pointer */ |
| struct completion cmp; /* interrupt completion */ |
| u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* temp R/W data buffer */ |
| }; |
| |
| /** |
| * ismt_ids - PCI device IDs supported by this driver |
| */ |
| static const struct pci_device_id ismt_ids[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT0) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT1) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMT) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMT) }, |
| { 0, } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, ismt_ids); |
| |
| /* Bus speed control bits for slow debuggers - refer to the docs for usage */ |
| static unsigned int bus_speed; |
| module_param(bus_speed, uint, S_IRUGO); |
| MODULE_PARM_DESC(bus_speed, "Bus Speed in kHz (0 = BIOS default)"); |
| |
| /** |
| * __ismt_desc_dump() - dump the contents of a specific descriptor |
| */ |
| static void __ismt_desc_dump(struct device *dev, const struct ismt_desc *desc) |
| { |
| |
| dev_dbg(dev, "Descriptor struct: %p\n", desc); |
| dev_dbg(dev, "\ttgtaddr_rw=0x%02X\n", desc->tgtaddr_rw); |
| dev_dbg(dev, "\twr_len_cmd=0x%02X\n", desc->wr_len_cmd); |
| dev_dbg(dev, "\trd_len= 0x%02X\n", desc->rd_len); |
| dev_dbg(dev, "\tcontrol= 0x%02X\n", desc->control); |
| dev_dbg(dev, "\tstatus= 0x%02X\n", desc->status); |
| dev_dbg(dev, "\tretry= 0x%02X\n", desc->retry); |
| dev_dbg(dev, "\trxbytes= 0x%02X\n", desc->rxbytes); |
| dev_dbg(dev, "\ttxbytes= 0x%02X\n", desc->txbytes); |
| dev_dbg(dev, "\tdptr_low= 0x%08X\n", desc->dptr_low); |
| dev_dbg(dev, "\tdptr_high= 0x%08X\n", desc->dptr_high); |
| } |
| /** |
| * ismt_desc_dump() - dump the contents of a descriptor for debug purposes |
| * @priv: iSMT private data |
| */ |
| static void ismt_desc_dump(struct ismt_priv *priv) |
| { |
| struct device *dev = &priv->pci_dev->dev; |
| struct ismt_desc *desc = &priv->hw[priv->head]; |
| |
| dev_dbg(dev, "Dump of the descriptor struct: 0x%X\n", priv->head); |
| __ismt_desc_dump(dev, desc); |
| } |
| |
| /** |
| * ismt_gen_reg_dump() - dump the iSMT General Registers |
| * @priv: iSMT private data |
| */ |
| static void ismt_gen_reg_dump(struct ismt_priv *priv) |
| { |
| struct device *dev = &priv->pci_dev->dev; |
| |
| dev_dbg(dev, "Dump of the iSMT General Registers\n"); |
| dev_dbg(dev, " GCTRL.... : (0x%p)=0x%X\n", |
| priv->smba + ISMT_GR_GCTRL, |
| readl(priv->smba + ISMT_GR_GCTRL)); |
| dev_dbg(dev, " SMTICL... : (0x%p)=0x%016llX\n", |
| priv->smba + ISMT_GR_SMTICL, |
| (long long unsigned int)readq(priv->smba + ISMT_GR_SMTICL)); |
| dev_dbg(dev, " ERRINTMSK : (0x%p)=0x%X\n", |
| priv->smba + ISMT_GR_ERRINTMSK, |
| readl(priv->smba + ISMT_GR_ERRINTMSK)); |
| dev_dbg(dev, " ERRAERMSK : (0x%p)=0x%X\n", |
| priv->smba + ISMT_GR_ERRAERMSK, |
| readl(priv->smba + ISMT_GR_ERRAERMSK)); |
| dev_dbg(dev, " ERRSTS... : (0x%p)=0x%X\n", |
| priv->smba + ISMT_GR_ERRSTS, |
| readl(priv->smba + ISMT_GR_ERRSTS)); |
| dev_dbg(dev, " ERRINFO.. : (0x%p)=0x%X\n", |
| priv->smba + ISMT_GR_ERRINFO, |
| readl(priv->smba + ISMT_GR_ERRINFO)); |
| } |
| |
| /** |
| * ismt_mstr_reg_dump() - dump the iSMT Master Registers |
| * @priv: iSMT private data |
| */ |
| static void ismt_mstr_reg_dump(struct ismt_priv *priv) |
| { |
| struct device *dev = &priv->pci_dev->dev; |
| |
| dev_dbg(dev, "Dump of the iSMT Master Registers\n"); |
| dev_dbg(dev, " MDBA..... : (0x%p)=0x%016llX\n", |
| priv->smba + ISMT_MSTR_MDBA, |
| (long long unsigned int)readq(priv->smba + ISMT_MSTR_MDBA)); |
| dev_dbg(dev, " MCTRL.... : (0x%p)=0x%X\n", |
| priv->smba + ISMT_MSTR_MCTRL, |
| readl(priv->smba + ISMT_MSTR_MCTRL)); |
| dev_dbg(dev, " MSTS..... : (0x%p)=0x%X\n", |
| priv->smba + ISMT_MSTR_MSTS, |
| readl(priv->smba + ISMT_MSTR_MSTS)); |
| dev_dbg(dev, " MDS...... : (0x%p)=0x%X\n", |
| priv->smba + ISMT_MSTR_MDS, |
| readl(priv->smba + ISMT_MSTR_MDS)); |
| dev_dbg(dev, " RPOLICY.. : (0x%p)=0x%X\n", |
| priv->smba + ISMT_MSTR_RPOLICY, |
| readl(priv->smba + ISMT_MSTR_RPOLICY)); |
| dev_dbg(dev, " SPGT..... : (0x%p)=0x%X\n", |
| priv->smba + ISMT_SPGT, |
| readl(priv->smba + ISMT_SPGT)); |
| } |
| |
| /** |
| * ismt_submit_desc() - add a descriptor to the ring |
| * @priv: iSMT private data |
| */ |
| static void ismt_submit_desc(struct ismt_priv *priv) |
| { |
| uint fmhp; |
| uint val; |
| |
| ismt_desc_dump(priv); |
| ismt_gen_reg_dump(priv); |
| ismt_mstr_reg_dump(priv); |
| |
| /* Set the FMHP (Firmware Master Head Pointer)*/ |
| fmhp = ((priv->head + 1) % ISMT_DESC_ENTRIES) << 16; |
| val = readl(priv->smba + ISMT_MSTR_MCTRL); |
| writel((val & ~ISMT_MCTRL_FMHP) | fmhp, |
| priv->smba + ISMT_MSTR_MCTRL); |
| |
| /* Set the start bit */ |
| val = readl(priv->smba + ISMT_MSTR_MCTRL); |
| writel(val | ISMT_MCTRL_SS, |
| priv->smba + ISMT_MSTR_MCTRL); |
| } |
| |
| /** |
| * ismt_process_desc() - handle the completion of the descriptor |
| * @desc: the iSMT hardware descriptor |
| * @data: data buffer from the upper layer |
| * @priv: ismt_priv struct holding our dma buffer |
| * @size: SMBus transaction type |
| * @read_write: flag to indicate if this is a read or write |
| */ |
| static int ismt_process_desc(const struct ismt_desc *desc, |
| union i2c_smbus_data *data, |
| struct ismt_priv *priv, int size, |
| char read_write) |
| { |
| u8 *dma_buffer = priv->dma_buffer; |
| |
| dev_dbg(&priv->pci_dev->dev, "Processing completed descriptor\n"); |
| __ismt_desc_dump(&priv->pci_dev->dev, desc); |
| |
| if (desc->status & ISMT_DESC_SCS) { |
| if (read_write == I2C_SMBUS_WRITE && |
| size != I2C_SMBUS_PROC_CALL) |
| return 0; |
| |
| switch (size) { |
| case I2C_SMBUS_BYTE: |
| case I2C_SMBUS_BYTE_DATA: |
| data->byte = dma_buffer[0]; |
| break; |
| case I2C_SMBUS_WORD_DATA: |
| case I2C_SMBUS_PROC_CALL: |
| data->word = dma_buffer[0] | (dma_buffer[1] << 8); |
| break; |
| case I2C_SMBUS_BLOCK_DATA: |
| case I2C_SMBUS_I2C_BLOCK_DATA: |
| if (desc->rxbytes != dma_buffer[0] + 1) |
| return -EMSGSIZE; |
| |
| memcpy(data->block, dma_buffer, desc->rxbytes); |
| break; |
| } |
| return 0; |
| } |
| |
| if (likely(desc->status & ISMT_DESC_NAK)) |
| return -ENXIO; |
| |
| if (desc->status & ISMT_DESC_CRC) |
| return -EBADMSG; |
| |
| if (desc->status & ISMT_DESC_COL) |
| return -EAGAIN; |
| |
| if (desc->status & ISMT_DESC_LPR) |
| return -EPROTO; |
| |
| if (desc->status & (ISMT_DESC_DLTO | ISMT_DESC_CLTO)) |
| return -ETIMEDOUT; |
| |
| return -EIO; |
| } |
| |
| /** |
| * ismt_access() - process an SMBus command |
| * @adap: the i2c host adapter |
| * @addr: address of the i2c/SMBus target |
| * @flags: command options |
| * @read_write: read from or write to device |
| * @command: the i2c/SMBus command to issue |
| * @size: SMBus transaction type |
| * @data: read/write data buffer |
| */ |
| static int ismt_access(struct i2c_adapter *adap, u16 addr, |
| unsigned short flags, char read_write, u8 command, |
| int size, union i2c_smbus_data *data) |
| { |
| int ret; |
| unsigned long time_left; |
| dma_addr_t dma_addr = 0; /* address of the data buffer */ |
| u8 dma_size = 0; |
| enum dma_data_direction dma_direction = 0; |
| struct ismt_desc *desc; |
| struct ismt_priv *priv = i2c_get_adapdata(adap); |
| struct device *dev = &priv->pci_dev->dev; |
| |
| desc = &priv->hw[priv->head]; |
| |
| /* Initialize the DMA buffer */ |
| memset(priv->dma_buffer, 0, sizeof(priv->dma_buffer)); |
| |
| /* Initialize the descriptor */ |
| memset(desc, 0, sizeof(struct ismt_desc)); |
| desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, read_write); |
| |
| /* Initialize common control bits */ |
| if (likely(pci_dev_msi_enabled(priv->pci_dev))) |
| desc->control = ISMT_DESC_INT | ISMT_DESC_FAIR; |
| else |
| desc->control = ISMT_DESC_FAIR; |
| |
| if ((flags & I2C_CLIENT_PEC) && (size != I2C_SMBUS_QUICK) |
| && (size != I2C_SMBUS_I2C_BLOCK_DATA)) |
| desc->control |= ISMT_DESC_PEC; |
| |
| switch (size) { |
| case I2C_SMBUS_QUICK: |
| dev_dbg(dev, "I2C_SMBUS_QUICK\n"); |
| break; |
| |
| case I2C_SMBUS_BYTE: |
| if (read_write == I2C_SMBUS_WRITE) { |
| /* |
| * Send Byte |
| * The command field contains the write data |
| */ |
| dev_dbg(dev, "I2C_SMBUS_BYTE: WRITE\n"); |
| desc->control |= ISMT_DESC_CWRL; |
| desc->wr_len_cmd = command; |
| } else { |
| /* Receive Byte */ |
| dev_dbg(dev, "I2C_SMBUS_BYTE: READ\n"); |
| dma_size = 1; |
| dma_direction = DMA_FROM_DEVICE; |
| desc->rd_len = 1; |
| } |
| break; |
| |
| case I2C_SMBUS_BYTE_DATA: |
| if (read_write == I2C_SMBUS_WRITE) { |
| /* |
| * Write Byte |
| * Command plus 1 data byte |
| */ |
| dev_dbg(dev, "I2C_SMBUS_BYTE_DATA: WRITE\n"); |
| desc->wr_len_cmd = 2; |
| dma_size = 2; |
| dma_direction = DMA_TO_DEVICE; |
| priv->dma_buffer[0] = command; |
| priv->dma_buffer[1] = data->byte; |
| } else { |
| /* Read Byte */ |
| dev_dbg(dev, "I2C_SMBUS_BYTE_DATA: READ\n"); |
| desc->control |= ISMT_DESC_CWRL; |
| desc->wr_len_cmd = command; |
| desc->rd_len = 1; |
| dma_size = 1; |
| dma_direction = DMA_FROM_DEVICE; |
| } |
| break; |
| |
| case I2C_SMBUS_WORD_DATA: |
| if (read_write == I2C_SMBUS_WRITE) { |
| /* Write Word */ |
| dev_dbg(dev, "I2C_SMBUS_WORD_DATA: WRITE\n"); |
| desc->wr_len_cmd = 3; |
| dma_size = 3; |
| dma_direction = DMA_TO_DEVICE; |
| priv->dma_buffer[0] = command; |
| priv->dma_buffer[1] = data->word & 0xff; |
| priv->dma_buffer[2] = data->word >> 8; |
| } else { |
| /* Read Word */ |
| dev_dbg(dev, "I2C_SMBUS_WORD_DATA: READ\n"); |
| desc->wr_len_cmd = command; |
| desc->control |= ISMT_DESC_CWRL; |
| desc->rd_len = 2; |
| dma_size = 2; |
| dma_direction = DMA_FROM_DEVICE; |
| } |
| break; |
| |
| case I2C_SMBUS_PROC_CALL: |
| dev_dbg(dev, "I2C_SMBUS_PROC_CALL\n"); |
| desc->wr_len_cmd = 3; |
| desc->rd_len = 2; |
| dma_size = 3; |
| dma_direction = DMA_BIDIRECTIONAL; |
| priv->dma_buffer[0] = command; |
| priv->dma_buffer[1] = data->word & 0xff; |
| priv->dma_buffer[2] = data->word >> 8; |
| break; |
| |
| case I2C_SMBUS_BLOCK_DATA: |
| if (read_write == I2C_SMBUS_WRITE) { |
| /* Block Write */ |
| dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA: WRITE\n"); |
| dma_size = data->block[0] + 1; |
| dma_direction = DMA_TO_DEVICE; |
| desc->wr_len_cmd = dma_size; |
| desc->control |= ISMT_DESC_BLK; |
| priv->dma_buffer[0] = command; |
| memcpy(&priv->dma_buffer[1], &data->block[1], dma_size - 1); |
| } else { |
| /* Block Read */ |
| dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA: READ\n"); |
| dma_size = I2C_SMBUS_BLOCK_MAX; |
| dma_direction = DMA_FROM_DEVICE; |
| desc->rd_len = dma_size; |
| desc->wr_len_cmd = command; |
| desc->control |= (ISMT_DESC_BLK | ISMT_DESC_CWRL); |
| } |
| break; |
| |
| case I2C_SMBUS_I2C_BLOCK_DATA: |
| /* Make sure the length is valid */ |
| if (data->block[0] < 1) |
| data->block[0] = 1; |
| |
| if (data->block[0] > I2C_SMBUS_BLOCK_MAX) |
| data->block[0] = I2C_SMBUS_BLOCK_MAX; |
| |
| if (read_write == I2C_SMBUS_WRITE) { |
| /* i2c Block Write */ |
| dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA: WRITE\n"); |
| dma_size = data->block[0] + 1; |
| dma_direction = DMA_TO_DEVICE; |
| desc->wr_len_cmd = dma_size; |
| desc->control |= ISMT_DESC_I2C; |
| priv->dma_buffer[0] = command; |
| memcpy(&priv->dma_buffer[1], &data->block[1], dma_size - 1); |
| } else { |
| /* i2c Block Read */ |
| dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA: READ\n"); |
| dma_size = data->block[0]; |
| dma_direction = DMA_FROM_DEVICE; |
| desc->rd_len = dma_size; |
| desc->wr_len_cmd = command; |
| desc->control |= (ISMT_DESC_I2C | ISMT_DESC_CWRL); |
| /* |
| * Per the "Table 15-15. I2C Commands", |
| * in the External Design Specification (EDS), |
| * (Document Number: 508084, Revision: 2.0), |
| * the _rw bit must be 0 |
| */ |
| desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, 0); |
| } |
| break; |
| |
| default: |
| dev_err(dev, "Unsupported transaction %d\n", |
| size); |
| return -EOPNOTSUPP; |
| } |
| |
| /* map the data buffer */ |
| if (dma_size != 0) { |
| dev_dbg(dev, " dev=%p\n", dev); |
| dev_dbg(dev, " data=%p\n", data); |
| dev_dbg(dev, " dma_buffer=%p\n", priv->dma_buffer); |
| dev_dbg(dev, " dma_size=%d\n", dma_size); |
| dev_dbg(dev, " dma_direction=%d\n", dma_direction); |
| |
| dma_addr = dma_map_single(dev, |
| priv->dma_buffer, |
| dma_size, |
| dma_direction); |
| |
| if (dma_mapping_error(dev, dma_addr)) { |
| dev_err(dev, "Error in mapping dma buffer %p\n", |
| priv->dma_buffer); |
| return -EIO; |
| } |
| |
| dev_dbg(dev, " dma_addr = 0x%016llX\n", |
| (unsigned long long)dma_addr); |
| |
| desc->dptr_low = lower_32_bits(dma_addr); |
| desc->dptr_high = upper_32_bits(dma_addr); |
| } |
| |
| reinit_completion(&priv->cmp); |
| |
| /* Add the descriptor */ |
| ismt_submit_desc(priv); |
| |
| /* Now we wait for interrupt completion, 1s */ |
| time_left = wait_for_completion_timeout(&priv->cmp, HZ*1); |
| |
| /* unmap the data buffer */ |
| if (dma_size != 0) |
| dma_unmap_single(&adap->dev, dma_addr, dma_size, dma_direction); |
| |
| if (unlikely(!time_left)) { |
| dev_err(dev, "completion wait timed out\n"); |
| ret = -ETIMEDOUT; |
| goto out; |
| } |
| |
| /* do any post processing of the descriptor here */ |
| ret = ismt_process_desc(desc, data, priv, size, read_write); |
| |
| out: |
| /* Update the ring pointer */ |
| priv->head++; |
| priv->head %= ISMT_DESC_ENTRIES; |
| |
| return ret; |
| } |
| |
| /** |
| * ismt_func() - report which i2c commands are supported by this adapter |
| * @adap: the i2c host adapter |
| */ |
| static u32 ismt_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_SMBUS_QUICK | |
| I2C_FUNC_SMBUS_BYTE | |
| I2C_FUNC_SMBUS_BYTE_DATA | |
| I2C_FUNC_SMBUS_WORD_DATA | |
| I2C_FUNC_SMBUS_PROC_CALL | |
| I2C_FUNC_SMBUS_BLOCK_DATA | |
| I2C_FUNC_SMBUS_I2C_BLOCK | |
| I2C_FUNC_SMBUS_PEC; |
| } |
| |
| /** |
| * smbus_algorithm - the adapter algorithm and supported functionality |
| * @smbus_xfer: the adapter algorithm |
| * @functionality: functionality supported by the adapter |
| */ |
| static const struct i2c_algorithm smbus_algorithm = { |
| .smbus_xfer = ismt_access, |
| .functionality = ismt_func, |
| }; |
| |
| /** |
| * ismt_handle_isr() - interrupt handler bottom half |
| * @priv: iSMT private data |
| */ |
| static irqreturn_t ismt_handle_isr(struct ismt_priv *priv) |
| { |
| complete(&priv->cmp); |
| |
| return IRQ_HANDLED; |
| } |
| |
| |
| /** |
| * ismt_do_interrupt() - IRQ interrupt handler |
| * @vec: interrupt vector |
| * @data: iSMT private data |
| */ |
| static irqreturn_t ismt_do_interrupt(int vec, void *data) |
| { |
| u32 val; |
| struct ismt_priv *priv = data; |
| |
| /* |
| * check to see it's our interrupt, return IRQ_NONE if not ours |
| * since we are sharing interrupt |
| */ |
| val = readl(priv->smba + ISMT_MSTR_MSTS); |
| |
| if (!(val & (ISMT_MSTS_MIS | ISMT_MSTS_MEIS))) |
| return IRQ_NONE; |
| else |
| writel(val | ISMT_MSTS_MIS | ISMT_MSTS_MEIS, |
| priv->smba + ISMT_MSTR_MSTS); |
| |
| return ismt_handle_isr(priv); |
| } |
| |
| /** |
| * ismt_do_msi_interrupt() - MSI interrupt handler |
| * @vec: interrupt vector |
| * @data: iSMT private data |
| */ |
| static irqreturn_t ismt_do_msi_interrupt(int vec, void *data) |
| { |
| return ismt_handle_isr(data); |
| } |
| |
| /** |
| * ismt_hw_init() - initialize the iSMT hardware |
| * @priv: iSMT private data |
| */ |
| static void ismt_hw_init(struct ismt_priv *priv) |
| { |
| u32 val; |
| struct device *dev = &priv->pci_dev->dev; |
| |
| /* initialize the Master Descriptor Base Address (MDBA) */ |
| writeq(priv->io_rng_dma, priv->smba + ISMT_MSTR_MDBA); |
| |
| /* initialize the Master Control Register (MCTRL) */ |
| writel(ISMT_MCTRL_MEIE, priv->smba + ISMT_MSTR_MCTRL); |
| |
| /* initialize the Master Status Register (MSTS) */ |
| writel(0, priv->smba + ISMT_MSTR_MSTS); |
| |
| /* initialize the Master Descriptor Size (MDS) */ |
| val = readl(priv->smba + ISMT_MSTR_MDS); |
| writel((val & ~ISMT_MDS_MASK) | (ISMT_DESC_ENTRIES - 1), |
| priv->smba + ISMT_MSTR_MDS); |
| |
| /* |
| * Set the SMBus speed (could use this for slow HW debuggers) |
| */ |
| |
| val = readl(priv->smba + ISMT_SPGT); |
| |
| switch (bus_speed) { |
| case 0: |
| break; |
| |
| case 80: |
| dev_dbg(dev, "Setting SMBus clock to 80 kHz\n"); |
| writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_80K), |
| priv->smba + ISMT_SPGT); |
| break; |
| |
| case 100: |
| dev_dbg(dev, "Setting SMBus clock to 100 kHz\n"); |
| writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_100K), |
| priv->smba + ISMT_SPGT); |
| break; |
| |
| case 400: |
| dev_dbg(dev, "Setting SMBus clock to 400 kHz\n"); |
| writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_400K), |
| priv->smba + ISMT_SPGT); |
| break; |
| |
| case 1000: |
| dev_dbg(dev, "Setting SMBus clock to 1000 kHz\n"); |
| writel(((val & ~ISMT_SPGT_SPD_MASK) | ISMT_SPGT_SPD_1M), |
| priv->smba + ISMT_SPGT); |
| break; |
| |
| default: |
| dev_warn(dev, "Invalid SMBus clock speed, only 0, 80, 100, 400, and 1000 are valid\n"); |
| break; |
| } |
| |
| val = readl(priv->smba + ISMT_SPGT); |
| |
| switch (val & ISMT_SPGT_SPD_MASK) { |
| case ISMT_SPGT_SPD_80K: |
| bus_speed = 80; |
| break; |
| case ISMT_SPGT_SPD_100K: |
| bus_speed = 100; |
| break; |
| case ISMT_SPGT_SPD_400K: |
| bus_speed = 400; |
| break; |
| case ISMT_SPGT_SPD_1M: |
| bus_speed = 1000; |
| break; |
| } |
| dev_dbg(dev, "SMBus clock is running at %d kHz\n", bus_speed); |
| } |
| |
| /** |
| * ismt_dev_init() - initialize the iSMT data structures |
| * @priv: iSMT private data |
| */ |
| static int ismt_dev_init(struct ismt_priv *priv) |
| { |
| /* allocate memory for the descriptor */ |
| priv->hw = dmam_alloc_coherent(&priv->pci_dev->dev, |
| (ISMT_DESC_ENTRIES |
| * sizeof(struct ismt_desc)), |
| &priv->io_rng_dma, |
| GFP_KERNEL); |
| if (!priv->hw) |
| return -ENOMEM; |
| |
| memset(priv->hw, 0, (ISMT_DESC_ENTRIES * sizeof(struct ismt_desc))); |
| |
| priv->head = 0; |
| init_completion(&priv->cmp); |
| |
| return 0; |
| } |
| |
| /** |
| * ismt_int_init() - initialize interrupts |
| * @priv: iSMT private data |
| */ |
| static int ismt_int_init(struct ismt_priv *priv) |
| { |
| int err; |
| |
| /* Try using MSI interrupts */ |
| err = pci_enable_msi(priv->pci_dev); |
| if (err) |
| goto intx; |
| |
| err = devm_request_irq(&priv->pci_dev->dev, |
| priv->pci_dev->irq, |
| ismt_do_msi_interrupt, |
| 0, |
| "ismt-msi", |
| priv); |
| if (err) { |
| pci_disable_msi(priv->pci_dev); |
| goto intx; |
| } |
| |
| return 0; |
| |
| /* Try using legacy interrupts */ |
| intx: |
| dev_warn(&priv->pci_dev->dev, |
| "Unable to use MSI interrupts, falling back to legacy\n"); |
| |
| err = devm_request_irq(&priv->pci_dev->dev, |
| priv->pci_dev->irq, |
| ismt_do_interrupt, |
| IRQF_SHARED, |
| "ismt-intx", |
| priv); |
| if (err) { |
| dev_err(&priv->pci_dev->dev, "no usable interrupts\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static struct pci_driver ismt_driver; |
| |
| /** |
| * ismt_probe() - probe for iSMT devices |
| * @pdev: PCI-Express device |
| * @id: PCI-Express device ID |
| */ |
| static int |
| ismt_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| int err; |
| struct ismt_priv *priv; |
| unsigned long start, len; |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| pci_set_drvdata(pdev, priv); |
| |
| i2c_set_adapdata(&priv->adapter, priv); |
| priv->adapter.owner = THIS_MODULE; |
| priv->adapter.class = I2C_CLASS_HWMON; |
| priv->adapter.algo = &smbus_algorithm; |
| priv->adapter.dev.parent = &pdev->dev; |
| ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&pdev->dev)); |
| priv->adapter.retries = ISMT_MAX_RETRIES; |
| |
| priv->pci_dev = pdev; |
| |
| err = pcim_enable_device(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to enable SMBus PCI device (%d)\n", |
| err); |
| return err; |
| } |
| |
| /* enable bus mastering */ |
| pci_set_master(pdev); |
| |
| /* Determine the address of the SMBus area */ |
| start = pci_resource_start(pdev, SMBBAR); |
| len = pci_resource_len(pdev, SMBBAR); |
| if (!start || !len) { |
| dev_err(&pdev->dev, |
| "SMBus base address uninitialized, upgrade BIOS\n"); |
| return -ENODEV; |
| } |
| |
| snprintf(priv->adapter.name, sizeof(priv->adapter.name), |
| "SMBus iSMT adapter at %lx", start); |
| |
| dev_dbg(&priv->pci_dev->dev, " start=0x%lX\n", start); |
| dev_dbg(&priv->pci_dev->dev, " len=0x%lX\n", len); |
| |
| err = acpi_check_resource_conflict(&pdev->resource[SMBBAR]); |
| if (err) { |
| dev_err(&pdev->dev, "ACPI resource conflict!\n"); |
| return err; |
| } |
| |
| err = pci_request_region(pdev, SMBBAR, ismt_driver.name); |
| if (err) { |
| dev_err(&pdev->dev, |
| "Failed to request SMBus region 0x%lx-0x%lx\n", |
| start, start + len); |
| return err; |
| } |
| |
| priv->smba = pcim_iomap(pdev, SMBBAR, len); |
| if (!priv->smba) { |
| dev_err(&pdev->dev, "Unable to ioremap SMBus BAR\n"); |
| return -ENODEV; |
| } |
| |
| if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) || |
| (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)) { |
| if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) || |
| (pci_set_consistent_dma_mask(pdev, |
| DMA_BIT_MASK(32)) != 0)) { |
| dev_err(&pdev->dev, "pci_set_dma_mask fail %p\n", |
| pdev); |
| return -ENODEV; |
| } |
| } |
| |
| err = ismt_dev_init(priv); |
| if (err) |
| return err; |
| |
| ismt_hw_init(priv); |
| |
| err = ismt_int_init(priv); |
| if (err) |
| return err; |
| |
| err = i2c_add_adapter(&priv->adapter); |
| if (err) |
| return -ENODEV; |
| return 0; |
| } |
| |
| /** |
| * ismt_remove() - release driver resources |
| * @pdev: PCI-Express device |
| */ |
| static void ismt_remove(struct pci_dev *pdev) |
| { |
| struct ismt_priv *priv = pci_get_drvdata(pdev); |
| |
| i2c_del_adapter(&priv->adapter); |
| } |
| |
| static struct pci_driver ismt_driver = { |
| .name = "ismt_smbus", |
| .id_table = ismt_ids, |
| .probe = ismt_probe, |
| .remove = ismt_remove, |
| }; |
| |
| module_pci_driver(ismt_driver); |
| |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_AUTHOR("Bill E. Brown <bill.e.brown@intel.com>"); |
| MODULE_DESCRIPTION("Intel SMBus Message Transport (iSMT) driver"); |