| #ifndef _ASM_X86_SPECIAL_INSNS_H |
| #define _ASM_X86_SPECIAL_INSNS_H |
| |
| |
| #ifdef __KERNEL__ |
| |
| #include <asm/nops.h> |
| |
| static inline void native_clts(void) |
| { |
| asm volatile("clts"); |
| } |
| |
| /* |
| * Volatile isn't enough to prevent the compiler from reordering the |
| * read/write functions for the control registers and messing everything up. |
| * A memory clobber would solve the problem, but would prevent reordering of |
| * all loads stores around it, which can hurt performance. Solution is to |
| * use a variable and mimic reads and writes to it to enforce serialization |
| */ |
| extern unsigned long __force_order; |
| |
| static inline unsigned long native_read_cr0(void) |
| { |
| unsigned long val; |
| asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order)); |
| return val; |
| } |
| |
| static inline void native_write_cr0(unsigned long val) |
| { |
| asm volatile("mov %0,%%cr0": : "r" (val), "m" (__force_order)); |
| } |
| |
| static inline unsigned long native_read_cr2(void) |
| { |
| unsigned long val; |
| asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order)); |
| return val; |
| } |
| |
| static inline void native_write_cr2(unsigned long val) |
| { |
| asm volatile("mov %0,%%cr2": : "r" (val), "m" (__force_order)); |
| } |
| |
| static inline unsigned long native_read_cr3(void) |
| { |
| unsigned long val; |
| asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order)); |
| return val; |
| } |
| |
| static inline void native_write_cr3(unsigned long val) |
| { |
| asm volatile("mov %0,%%cr3": : "r" (val), "m" (__force_order)); |
| } |
| |
| static inline unsigned long native_read_cr4(void) |
| { |
| unsigned long val; |
| #ifdef CONFIG_X86_32 |
| /* |
| * This could fault if CR4 does not exist. Non-existent CR4 |
| * is functionally equivalent to CR4 == 0. Keep it simple and pretend |
| * that CR4 == 0 on CPUs that don't have CR4. |
| */ |
| asm volatile("1: mov %%cr4, %0\n" |
| "2:\n" |
| _ASM_EXTABLE(1b, 2b) |
| : "=r" (val), "=m" (__force_order) : "0" (0)); |
| #else |
| /* CR4 always exists on x86_64. */ |
| asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order)); |
| #endif |
| return val; |
| } |
| |
| static inline void native_write_cr4(unsigned long val) |
| { |
| asm volatile("mov %0,%%cr4": : "r" (val), "m" (__force_order)); |
| } |
| |
| #ifdef CONFIG_X86_64 |
| static inline unsigned long native_read_cr8(void) |
| { |
| unsigned long cr8; |
| asm volatile("movq %%cr8,%0" : "=r" (cr8)); |
| return cr8; |
| } |
| |
| static inline void native_write_cr8(unsigned long val) |
| { |
| asm volatile("movq %0,%%cr8" :: "r" (val) : "memory"); |
| } |
| #endif |
| |
| #ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS |
| static inline u32 __read_pkru(void) |
| { |
| u32 ecx = 0; |
| u32 edx, pkru; |
| |
| /* |
| * "rdpkru" instruction. Places PKRU contents in to EAX, |
| * clears EDX and requires that ecx=0. |
| */ |
| asm volatile(".byte 0x0f,0x01,0xee\n\t" |
| : "=a" (pkru), "=d" (edx) |
| : "c" (ecx)); |
| return pkru; |
| } |
| |
| static inline void __write_pkru(u32 pkru) |
| { |
| u32 ecx = 0, edx = 0; |
| |
| /* |
| * "wrpkru" instruction. Loads contents in EAX to PKRU, |
| * requires that ecx = edx = 0. |
| */ |
| asm volatile(".byte 0x0f,0x01,0xef\n\t" |
| : : "a" (pkru), "c"(ecx), "d"(edx)); |
| } |
| #else |
| static inline u32 __read_pkru(void) |
| { |
| return 0; |
| } |
| |
| static inline void __write_pkru(u32 pkru) |
| { |
| } |
| #endif |
| |
| static inline void native_wbinvd(void) |
| { |
| asm volatile("wbinvd": : :"memory"); |
| } |
| |
| extern asmlinkage void native_load_gs_index(unsigned); |
| |
| #ifdef CONFIG_PARAVIRT |
| #include <asm/paravirt.h> |
| #else |
| |
| static inline unsigned long read_cr0(void) |
| { |
| return native_read_cr0(); |
| } |
| |
| static inline void write_cr0(unsigned long x) |
| { |
| native_write_cr0(x); |
| } |
| |
| static inline unsigned long read_cr2(void) |
| { |
| return native_read_cr2(); |
| } |
| |
| static inline void write_cr2(unsigned long x) |
| { |
| native_write_cr2(x); |
| } |
| |
| static inline unsigned long read_cr3(void) |
| { |
| return native_read_cr3(); |
| } |
| |
| static inline void write_cr3(unsigned long x) |
| { |
| native_write_cr3(x); |
| } |
| |
| static inline unsigned long __read_cr4(void) |
| { |
| return native_read_cr4(); |
| } |
| |
| static inline void __write_cr4(unsigned long x) |
| { |
| native_write_cr4(x); |
| } |
| |
| static inline void wbinvd(void) |
| { |
| native_wbinvd(); |
| } |
| |
| #ifdef CONFIG_X86_64 |
| |
| static inline unsigned long read_cr8(void) |
| { |
| return native_read_cr8(); |
| } |
| |
| static inline void write_cr8(unsigned long x) |
| { |
| native_write_cr8(x); |
| } |
| |
| static inline void load_gs_index(unsigned selector) |
| { |
| native_load_gs_index(selector); |
| } |
| |
| #endif |
| |
| /* Clear the 'TS' bit */ |
| static inline void clts(void) |
| { |
| native_clts(); |
| } |
| |
| #endif/* CONFIG_PARAVIRT */ |
| |
| #define stts() write_cr0(read_cr0() | X86_CR0_TS) |
| |
| static inline void clflush(volatile void *__p) |
| { |
| asm volatile("clflush %0" : "+m" (*(volatile char __force *)__p)); |
| } |
| |
| static inline void clflushopt(volatile void *__p) |
| { |
| alternative_io(".byte " __stringify(NOP_DS_PREFIX) "; clflush %P0", |
| ".byte 0x66; clflush %P0", |
| X86_FEATURE_CLFLUSHOPT, |
| "+m" (*(volatile char __force *)__p)); |
| } |
| |
| static inline void clwb(volatile void *__p) |
| { |
| volatile struct { char x[64]; } *p = __p; |
| |
| asm volatile(ALTERNATIVE_2( |
| ".byte " __stringify(NOP_DS_PREFIX) "; clflush (%[pax])", |
| ".byte 0x66; clflush (%[pax])", /* clflushopt (%%rax) */ |
| X86_FEATURE_CLFLUSHOPT, |
| ".byte 0x66, 0x0f, 0xae, 0x30", /* clwb (%%rax) */ |
| X86_FEATURE_CLWB) |
| : [p] "+m" (*p) |
| : [pax] "a" (p)); |
| } |
| |
| #define nop() asm volatile ("nop") |
| |
| |
| #endif /* __KERNEL__ */ |
| |
| #endif /* _ASM_X86_SPECIAL_INSNS_H */ |