| * Clock bindings for Freescale i.MX31 |
| |
| Required properties: |
| - compatible: Should be "fsl,imx31-ccm" |
| - reg: Address and length of the register set |
| - interrupts: Should contain CCM interrupt |
| - #clock-cells: Should be <1> |
| |
| The clock consumer should specify the desired clock by having the clock |
| ID in its "clocks" phandle cell. The following is a full list of i.MX31 |
| clocks and IDs. |
| |
| Clock ID |
| ----------------------- |
| dummy 0 |
| ckih 1 |
| ckil 2 |
| mpll 3 |
| spll 4 |
| upll 5 |
| mcu_main 6 |
| hsp 7 |
| ahb 8 |
| nfc 9 |
| ipg 10 |
| per_div 11 |
| per 12 |
| csi_sel 13 |
| fir_sel 14 |
| csi_div 15 |
| usb_div_pre 16 |
| usb_div_post 17 |
| fir_div_pre 18 |
| fir_div_post 19 |
| sdhc1_gate 20 |
| sdhc2_gate 21 |
| gpt_gate 22 |
| epit1_gate 23 |
| epit2_gate 24 |
| iim_gate 25 |
| ata_gate 26 |
| sdma_gate 27 |
| cspi3_gate 28 |
| rng_gate 29 |
| uart1_gate 30 |
| uart2_gate 31 |
| ssi1_gate 32 |
| i2c1_gate 33 |
| i2c2_gate 34 |
| i2c3_gate 35 |
| hantro_gate 36 |
| mstick1_gate 37 |
| mstick2_gate 38 |
| csi_gate 39 |
| rtc_gate 40 |
| wdog_gate 41 |
| pwm_gate 42 |
| sim_gate 43 |
| ect_gate 44 |
| usb_gate 45 |
| kpp_gate 46 |
| ipu_gate 47 |
| uart3_gate 48 |
| uart4_gate 49 |
| uart5_gate 50 |
| owire_gate 51 |
| ssi2_gate 52 |
| cspi1_gate 53 |
| cspi2_gate 54 |
| gacc_gate 55 |
| emi_gate 56 |
| rtic_gate 57 |
| firi_gate 58 |
| |
| Examples: |
| |
| clks: ccm@53f80000{ |
| compatible = "fsl,imx31-ccm"; |
| reg = <0x53f80000 0x4000>; |
| interrupts = <31>, <53>; |
| #clock-cells = <1>; |
| }; |
| |
| uart1: serial@43f90000 { |
| compatible = "fsl,imx31-uart", "fsl,imx21-uart"; |
| reg = <0x43f90000 0x4000>; |
| interrupts = <45>; |
| clocks = <&clks 10>, <&clks 30>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
