docs/plugins/gstreamer-plugins.args

<ARG>
<NAME>GstValve::drop</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Drop buffers and events</NICK>
<BLURB>Whether to drop buffers and events or let them through.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstTypeFindElement::caps</NAME>
<TYPE>GstCaps*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>caps</NICK>
<BLURB>detected capabilities in stream.</BLURB>
<DEFAULT></DEFAULT>
</ARG>

<ARG>
<NAME>GstTypeFindElement::force-caps</NAME>
<TYPE>GstCaps*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>force caps</NICK>
<BLURB>force caps without doing a typefind.</BLURB>
<DEFAULT></DEFAULT>
</ARG>

<ARG>
<NAME>GstTypeFindElement::minimum</NAME>
<TYPE>guint</TYPE>
<RANGE>[1,100]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>minimum</NICK>
<BLURB>minimum probability required to accept caps.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>

<ARG>
<NAME>GstTee::alloc-pad</NAME>
<TYPE>GstPad*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Allocation Src Pad</NICK>
<BLURB>The pad ALLOCATION queries will be proxied to (DEPRECATED, has no effect).</BLURB>
<DEFAULT></DEFAULT>
</ARG>

<ARG>
<NAME>GstTee::has-chain</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Has Chain</NICK>
<BLURB>If the element can operate in push mode.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>

<ARG>
<NAME>GstTee::last-message</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Last Message</NICK>
<BLURB>The message describing current status.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>

<ARG>
<NAME>GstTee::num-src-pads</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>r</FLAGS>
<NICK>Num Src Pads</NICK>
<BLURB>The number of source pads.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstTee::pull-mode</NAME>
<TYPE>GstTeePullMode</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Pull mode</NICK>
<BLURB>Behavior of tee in pull mode.</BLURB>
<DEFAULT>Never activate in pull mode</DEFAULT>
</ARG>

<ARG>
<NAME>GstTee::silent</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Silent</NICK>
<BLURB>Don't produce last_message events.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>

<ARG>
<NAME>GstTee::allow-not-linked</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Allow not linked</NICK>
<BLURB>Return GST_FLOW_OK even if there are no source pads or they are all unlinked.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::current-level-buffers</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Current level (buffers)</NICK>
<BLURB>Current number of buffers in the queue.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::current-level-bytes</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Current level (kB)</NICK>
<BLURB>Current amount of data in the queue (bytes).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::current-level-time</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Current level (ns)</NICK>
<BLURB>Current amount of data in the queue (in ns).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::high-percent</NAME>
<TYPE>gint</TYPE>
<RANGE>[0,100]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>High percent</NICK>
<BLURB>High threshold for buffering to finish. Only used if use-buffering is True (Deprecated: use high-watermark instead).</BLURB>
<DEFAULT>99</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::low-percent</NAME>
<TYPE>gint</TYPE>
<RANGE>[0,100]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Low percent</NICK>
<BLURB>Low threshold for buffering to start. Only used if use-buffering is True (Deprecated: use low-watermark instead).</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::max-size-buffers</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Max. size (buffers)</NICK>
<BLURB>Max. number of buffers in the queue (0=disable).</BLURB>
<DEFAULT>100</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::max-size-bytes</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Max. size (kB)</NICK>
<BLURB>Max. amount of data in the queue (bytes, 0=disable).</BLURB>
<DEFAULT>2097152</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::max-size-time</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Max. size (ns)</NICK>
<BLURB>Max. amount of data in the queue (in ns, 0=disable).</BLURB>
<DEFAULT>2000000000</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::ring-buffer-max-size</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Max. ring buffer size (bytes)</NICK>
<BLURB>Max. amount of data in the ring buffer (bytes, 0 = disabled).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::temp-location</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Temporary File Location</NICK>
<BLURB>Location to store temporary files in (Only read this property, use temp-template to configure the name template).</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::temp-remove</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Remove the Temporary File</NICK>
<BLURB>Remove the temp-location after use.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::temp-template</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Temporary File Template</NICK>
<BLURB>File template to store temporary files in, should contain directory and XXXXXX. (NULL == disabled).</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::use-buffering</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Use buffering</NICK>
<BLURB>Emit GST_MESSAGE_BUFFERING based on low-/high-percent thresholds.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::use-rate-estimate</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Use Rate Estimate</NICK>
<BLURB>Estimate the bitrate of the stream to calculate time level.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::avg-in-rate</NAME>
<TYPE>gint64</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>r</FLAGS>
<NICK>Input data rate (bytes/s)</NICK>
<BLURB>Average input data rate (bytes/s).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::use-tags-bitrate</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Use bitrate from tags</NICK>
<BLURB>Use a bitrate from upstream tags to estimate buffer duration if not provided.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::high-watermark</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[0,1]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>High watermark</NICK>
<BLURB>High threshold for buffering to finish. Only used if use-buffering is True.</BLURB>
<DEFAULT>0.99</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue2::low-watermark</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[0,1]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Low watermark</NICK>
<BLURB>Low threshold for buffering to start. Only used if use-buffering is True.</BLURB>
<DEFAULT>0.01</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue::current-level-buffers</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Current level (buffers)</NICK>
<BLURB>Current number of buffers in the queue.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue::current-level-bytes</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Current level (kB)</NICK>
<BLURB>Current amount of data in the queue (bytes).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue::current-level-time</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Current level (ns)</NICK>
<BLURB>Current amount of data in the queue (in ns).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue::flush-on-eos</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Flush on EOS</NICK>
<BLURB>Discard all data in the queue when an EOS event is received.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue::leaky</NAME>
<TYPE>GstQueueLeaky</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Leaky</NICK>
<BLURB>Where the queue leaks, if at all.</BLURB>
<DEFAULT>Not Leaky</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue::max-size-buffers</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Max. size (buffers)</NICK>
<BLURB>Max. number of buffers in the queue (0=disable).</BLURB>
<DEFAULT>200</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue::max-size-bytes</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Max. size (kB)</NICK>
<BLURB>Max. amount of data in the queue (bytes, 0=disable).</BLURB>
<DEFAULT>10485760</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue::max-size-time</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Max. size (ns)</NICK>
<BLURB>Max. amount of data in the queue (in ns, 0=disable).</BLURB>
<DEFAULT>1000000000</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue::min-threshold-buffers</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Min. threshold (buffers)</NICK>
<BLURB>Min. number of buffers in the queue to allow reading (0=disable).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue::min-threshold-bytes</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Min. threshold (kB)</NICK>
<BLURB>Min. amount of data in the queue to allow reading (bytes, 0=disable).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue::min-threshold-time</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Min. threshold (ns)</NICK>
<BLURB>Min. amount of data in the queue to allow reading (in ns, 0=disable).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstQueue::silent</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Silent</NICK>
<BLURB>Don't emit queue signals.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstOutputSelector::active-pad</NAME>
<TYPE>GstPad*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Active pad</NICK>
<BLURB>Currently active src pad.</BLURB>
<DEFAULT></DEFAULT>
</ARG>

<ARG>
<NAME>GstOutputSelector::pad-negotiation-mode</NAME>
<TYPE>GstOutputSelectorPadNegotiationMode</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Pad negotiation mode</NICK>
<BLURB>The mode to be used for pad negotiation.</BLURB>
<DEFAULT>All</DEFAULT>
</ARG>

<ARG>
<NAME>GstOutputSelector::resend-latest</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Resend latest buffer</NICK>
<BLURB>Resend latest buffer after a switch to a new pad.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstMultiQueue::extra-size-buffers</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Extra Size (buffers)</NICK>
<BLURB>Amount of buffers the queues can grow if one of them is empty (0=disable) (NOT IMPLEMENTED).</BLURB>
<DEFAULT>5</DEFAULT>
</ARG>

<ARG>
<NAME>GstMultiQueue::extra-size-bytes</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Extra Size (kB)</NICK>
<BLURB>Amount of data the queues can grow if one of them is empty (bytes, 0=disable) (NOT IMPLEMENTED).</BLURB>
<DEFAULT>10485760</DEFAULT>
</ARG>

<ARG>
<NAME>GstMultiQueue::extra-size-time</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Extra Size (ns)</NICK>
<BLURB>Amount of time the queues can grow if one of them is empty (in ns, 0=disable) (NOT IMPLEMENTED).</BLURB>
<DEFAULT>3000000000</DEFAULT>
</ARG>

<ARG>
<NAME>GstMultiQueue::high-percent</NAME>
<TYPE>gint</TYPE>
<RANGE>[0,100]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>High percent</NICK>
<BLURB>High threshold for buffering to finish. Only used if use-buffering is True (Deprecated: use high-watermark instead).</BLURB>
<DEFAULT>99</DEFAULT>
</ARG>

<ARG>
<NAME>GstMultiQueue::low-percent</NAME>
<TYPE>gint</TYPE>
<RANGE>[0,100]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Low percent</NICK>
<BLURB>Low threshold for buffering to start. Only used if use-buffering is True (Deprecated: use low-watermark instead).</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>

<ARG>
<NAME>GstMultiQueue::max-size-buffers</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Max. size (buffers)</NICK>
<BLURB>Max. number of buffers in the queue (0=disable).</BLURB>
<DEFAULT>5</DEFAULT>
</ARG>

<ARG>
<NAME>GstMultiQueue::max-size-bytes</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Max. size (kB)</NICK>
<BLURB>Max. amount of data in the queue (bytes, 0=disable).</BLURB>
<DEFAULT>10485760</DEFAULT>
</ARG>

<ARG>
<NAME>GstMultiQueue::max-size-time</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Max. size (ns)</NICK>
<BLURB>Max. amount of data in the queue (in ns, 0=disable).</BLURB>
<DEFAULT>2000000000</DEFAULT>
</ARG>

<ARG>
<NAME>GstMultiQueue::sync-by-running-time</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Sync By Running Time</NICK>
<BLURB>Synchronize deactivated or not-linked streams by running time.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstMultiQueue::use-buffering</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Use buffering</NICK>
<BLURB>Emit GST_MESSAGE_BUFFERING based on low-/high-percent thresholds.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstMultiQueue::unlinked-cache-time</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Unlinked cache time (ns)</NICK>
<BLURB>Extra buffering in time for unlinked streams (if 'sync-by-running-time').</BLURB>
<DEFAULT>250000000</DEFAULT>
</ARG>

<ARG>
<NAME>GstMultiQueue::use-interleave</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Use interleave</NICK>
<BLURB>Adjust time limits based on input interleave.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstMultiQueue::high-watermark</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[0,1]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>High watermark</NICK>
<BLURB>High threshold for buffering to finish. Only used if use-buffering is True.</BLURB>
<DEFAULT>0.99</DEFAULT>
</ARG>

<ARG>
<NAME>GstMultiQueue::low-watermark</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[0,1]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Low watermark</NICK>
<BLURB>Low threshold for buffering to start. Only used if use-buffering is True.</BLURB>
<DEFAULT>0.01</DEFAULT>
</ARG>

<ARG>
<NAME>GstMultiQueue::min-interleave-time</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Minimum interleave time</NICK>
<BLURB>Minimum extra buffering for deinterleaving (size of the queues) when use-interleave=true.</BLURB>
<DEFAULT>250000000</DEFAULT>
</ARG>

<ARG>
<NAME>GstInputSelector::active-pad</NAME>
<TYPE>GstPad*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Active pad</NICK>
<BLURB>The currently active sink pad.</BLURB>
<DEFAULT></DEFAULT>
</ARG>

<ARG>
<NAME>GstInputSelector::cache-buffers</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Cache Buffers</NICK>
<BLURB>Cache buffers for active-pad.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstInputSelector::n-pads</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Number of Pads</NICK>
<BLURB>The number of sink pads.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstInputSelector::sync-mode</NAME>
<TYPE>GstInputSelectorSyncMode</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Sync mode</NICK>
<BLURB>Behavior in sync-streams mode.</BLURB>
<DEFAULT>Sync using the current active segment</DEFAULT>
</ARG>

<ARG>
<NAME>GstInputSelector::sync-streams</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Sync Streams</NICK>
<BLURB>Synchronize inactive streams to the running time of the active stream or to the current clock.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>

<ARG>
<NAME>GstIdentity::check-imperfect-offset</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Check for discontiguous offset</NICK>
<BLURB>Send element messages if offset and offset_end do not match up.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstIdentity::check-imperfect-timestamp</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Check for discontiguous timestamps</NICK>
<BLURB>Send element messages if timestamps and durations do not match up.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstIdentity::datarate</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Datarate</NICK>
<BLURB>(Re)timestamps buffers with number of bytes per second (0 = inactive).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstIdentity::drop-probability</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[0,1]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Drop Probability</NICK>
<BLURB>The Probability a buffer is dropped.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstIdentity::dump</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Dump</NICK>
<BLURB>Dump buffer contents to stdout.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstIdentity::error-after</NAME>
<TYPE>gint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Error After</NICK>
<BLURB>Error after N buffers.</BLURB>
<DEFAULT>-1</DEFAULT>
</ARG>

<ARG>
<NAME>GstIdentity::last-message</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>last-message</NICK>
<BLURB>last-message.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>

<ARG>
<NAME>GstIdentity::signal-handoffs</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Signal handoffs</NICK>
<BLURB>Send a signal before pushing the buffer.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>

<ARG>
<NAME>GstIdentity::silent</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>silent</NICK>
<BLURB>silent.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>

<ARG>
<NAME>GstIdentity::single-segment</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Single Segment</NICK>
<BLURB>Timestamp buffers and eat segments so as to appear as one segment.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstIdentity::sleep-time</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Sleep time</NICK>
<BLURB>Microseconds to sleep between processing.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstIdentity::sync</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Synchronize</NICK>
<BLURB>Synchronize to pipeline clock.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstIdentity::drop-buffer-flags</NAME>
<TYPE>GstBufferFlags</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Check flags to drop buffers</NICK>
<BLURB>Drop buffers with the given flags.</BLURB>
<DEFAULT></DEFAULT>
</ARG>

<ARG>
<NAME>GstIdentity::ts-offset</NAME>
<TYPE>gint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Timestamp offset for synchronisation</NICK>
<BLURB>Timestamp offset in nanoseconds for synchronisation, negative for earlier sync.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstIdentity::drop-allocation</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Drop allocation query</NICK>
<BLURB>Don't forward allocation queries.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstFileSrc::location</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>File Location</NICK>
<BLURB>Location of the file to read.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>

<ARG>
<NAME>GstFileSink::append</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Append</NICK>
<BLURB>Append to an already existing file.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstFileSink::buffer-mode</NAME>
<TYPE>GstFileSinkBufferMode</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Buffering mode</NICK>
<BLURB>The buffering mode to use.</BLURB>
<DEFAULT>Default buffering</DEFAULT>
</ARG>

<ARG>
<NAME>GstFileSink::buffer-size</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Buffering size</NICK>
<BLURB>Size of buffer in number of bytes for line or full buffer-mode.</BLURB>
<DEFAULT>65536</DEFAULT>
</ARG>

<ARG>
<NAME>GstFileSink::location</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>File Location</NICK>
<BLURB>Location of the file to write.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>

<ARG>
<NAME>GstFdSrc::fd</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>fd</NICK>
<BLURB>An open file descriptor to read from.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstFdSrc::timeout</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Timeout</NICK>
<BLURB>Post a message after timeout microseconds (0 = disabled).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstFdSink::fd</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>fd</NICK>
<BLURB>An open file descriptor to write to.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::can-activate-pull</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Can activate pull</NICK>
<BLURB>Can activate in pull mode.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::can-activate-push</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Can activate push</NICK>
<BLURB>Can activate in push mode.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::data</NAME>
<TYPE>GstFakeSrcDataType</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>data</NICK>
<BLURB>Data allocation method.</BLURB>
<DEFAULT>Allocate data</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::datarate</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Datarate</NICK>
<BLURB>Timestamps buffers with number of bytes per second (0 = none).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::dump</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Dump</NICK>
<BLURB>Dump buffer contents to stdout.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::filltype</NAME>
<TYPE>GstFakeSrcFillType</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>filltype</NICK>
<BLURB>How to fill the buffer, if at all.</BLURB>
<DEFAULT>Fill buffers with zeros</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::format</NAME>
<TYPE>GstFormat</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Format</NICK>
<BLURB>The format of the segment events.</BLURB>
<DEFAULT>GST_FORMAT_BYTES</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::is-live</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Is this a live source</NICK>
<BLURB>True if the element cannot produce data in PAUSED.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::last-message</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>last-message</NICK>
<BLURB>The last status message.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::parentsize</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>parentsize</NICK>
<BLURB>Size of parent buffer for sub-buffered allocation.</BLURB>
<DEFAULT>40960</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::pattern</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>pattern</NICK>
<BLURB>Set the pattern (unused).</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::signal-handoffs</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Signal handoffs</NICK>
<BLURB>Send a signal before pushing the buffer.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::silent</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Silent</NICK>
<BLURB>Don't produce last_message events.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::sizemax</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>sizemax</NICK>
<BLURB>Maximum buffer size.</BLURB>
<DEFAULT>4096</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::sizemin</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>sizemin</NICK>
<BLURB>Minimum buffer size.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::sizetype</NAME>
<TYPE>GstFakeSrcSizeType</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>sizetype</NICK>
<BLURB>How to determine buffer sizes.</BLURB>
<DEFAULT>Send empty buffers</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSrc::sync</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Sync</NICK>
<BLURB>Sync to the clock to the datarate.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSink::can-activate-pull</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Can activate pull</NICK>
<BLURB>Can activate in pull mode.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSink::can-activate-push</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Can activate push</NICK>
<BLURB>Can activate in push mode.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSink::dump</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Dump</NICK>
<BLURB>Dump buffer contents to stdout.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSink::last-message</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Last Message</NICK>
<BLURB>The message describing current status.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSink::num-buffers</NAME>
<TYPE>gint</TYPE>
<RANGE>>= G_MAXULONG</RANGE>
<FLAGS>rw</FLAGS>
<NICK>num-buffers</NICK>
<BLURB>Number of buffers to accept going EOS.</BLURB>
<DEFAULT>-1</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSink::signal-handoffs</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Signal handoffs</NICK>
<BLURB>Send a signal before unreffing the buffer.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSink::silent</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Silent</NICK>
<BLURB>Don't produce last_message events.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSink::state-error</NAME>
<TYPE>GstFakeSinkStateError</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>State Error</NICK>
<BLURB>Generate a state change error.</BLURB>
<DEFAULT>No state change errors</DEFAULT>
</ARG>

<ARG>
<NAME>GstFakeSink::drop-out-of-segment</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Drop out-of-segment buffers</NICK>
<BLURB>Drop and don't render / hand off out-of-segment buffers.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>

<ARG>
<NAME>GstCapsFilter::caps</NAME>
<TYPE>GstCaps*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Filter caps</NICK>
<BLURB>Restrict the possible allowed capabilities (NULL means ANY). Setting this property takes a reference to the supplied GstCaps object.</BLURB>
<DEFAULT></DEFAULT>
</ARG>

<ARG>
<NAME>GstCapsFilter::caps-change-mode</NAME>
<TYPE>GstCapsFilterCapsChangeMode</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Caps Change Mode</NICK>
<BLURB>Filter caps change behaviour.</BLURB>
<DEFAULT>Only accept the current filter caps</DEFAULT>
</ARG>

<ARG>
<NAME>GstDownloadBuffer::high-percent</NAME>
<TYPE>gint</TYPE>
<RANGE>[0,100]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>High percent</NICK>
<BLURB>High threshold for buffering to finish. Only used if use-buffering is True.</BLURB>
<DEFAULT>99</DEFAULT>
</ARG>

<ARG>
<NAME>GstDownloadBuffer::low-percent</NAME>
<TYPE>gint</TYPE>
<RANGE>[0,100]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Low percent</NICK>
<BLURB>Low threshold for buffering to start. Only used if use-buffering is True.</BLURB>
<DEFAULT>10</DEFAULT>
</ARG>

<ARG>
<NAME>GstDownloadBuffer::max-size-bytes</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Max. size (kB)</NICK>
<BLURB>Max. amount of data to buffer (bytes, 0=disable).</BLURB>
<DEFAULT>2097152</DEFAULT>
</ARG>

<ARG>
<NAME>GstDownloadBuffer::max-size-time</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Max. size (ns)</NICK>
<BLURB>Max. amount of data to buffer (in ns, 0=disable).</BLURB>
<DEFAULT>2000000000</DEFAULT>
</ARG>

<ARG>
<NAME>GstDownloadBuffer::temp-location</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Temporary File Location</NICK>
<BLURB>Location to store temporary files in (Only read this property, use temp-template to configure the name template).</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>

<ARG>
<NAME>GstDownloadBuffer::temp-remove</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Remove the Temporary File</NICK>
<BLURB>Remove the temp-location after use.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>

<ARG>
<NAME>GstDownloadBuffer::temp-template</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Temporary File Template</NICK>
<BLURB>File template to store temporary files in, should contain directory and XXXXXX. (NULL == disabled).</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>

<ARG>
<NAME>GstStreamidDemux::active-pad</NAME>
<TYPE>GstPad*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Active pad</NICK>
<BLURB>The currently active src pad.</BLURB>
<DEFAULT></DEFAULT>
</ARG>

<ARG>
<NAME>GstConcat::active-pad</NAME>
<TYPE>GstPad*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Active pad</NICK>
<BLURB>Currently active src pad.</BLURB>
<DEFAULT></DEFAULT>
</ARG>

<ARG>
<NAME>GstConcat::adjust-base</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Adjust segment base</NICK>
<BLURB>Adjust the base value of segments to ensure they are adjacent.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>

<ARG>
<NAME>GstFunnel::forward-sticky-events</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Forward sticky events</NICK>
<BLURB>Forward sticky events on stream changes.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>

<ARG>
<NAME>GstDataURISrc::uri</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>URI</NICK>
<BLURB>URI that should be used.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>