| /* GStreamer |
| * |
| * Copyright (C) 1999,2000 Erik Walthinsen <omega@cse.ogi.edu> |
| * 2004 Wim Taymans <wim.taymans@gmail.com> |
| * |
| * gstbin.c: GstBin container object and support code |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Library General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Library General Public License for more details. |
| * |
| * You should have received a copy of the GNU Library General Public |
| * License along with this library; if not, write to the |
| * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, |
| * Boston, MA 02110-1301, USA. |
| * |
| * MT safe. |
| */ |
| |
| /** |
| * SECTION:gstbin |
| * @title: GstBin |
| * @short_description: Base class and element that can contain other elements |
| * |
| * #GstBin is an element that can contain other #GstElement, allowing them to be |
| * managed as a group. |
| * Pads from the child elements can be ghosted to the bin, see #GstGhostPad. |
| * This makes the bin look like any other elements and enables creation of |
| * higher-level abstraction elements. |
| * |
| * A new #GstBin is created with gst_bin_new(). Use a #GstPipeline instead if you |
| * want to create a toplevel bin because a normal bin doesn't have a bus or |
| * handle clock distribution of its own. |
| * |
| * After the bin has been created you will typically add elements to it with |
| * gst_bin_add(). You can remove elements with gst_bin_remove(). |
| * |
| * An element can be retrieved from a bin with gst_bin_get_by_name(), using the |
| * elements name. gst_bin_get_by_name_recurse_up() is mainly used for internal |
| * purposes and will query the parent bins when the element is not found in the |
| * current bin. |
| * |
| * An iterator of elements in a bin can be retrieved with |
| * gst_bin_iterate_elements(). Various other iterators exist to retrieve the |
| * elements in a bin. |
| * |
| * gst_object_unref() is used to drop your reference to the bin. |
| * |
| * The #GstBin::element-added signal is fired whenever a new element is added to |
| * the bin. Likewise the #GstBin::element-removed signal is fired whenever an |
| * element is removed from the bin. |
| * |
| * ## Notes |
| * |
| * A #GstBin internally intercepts every #GstMessage posted by its children and |
| * implements the following default behaviour for each of them: |
| * |
| * * GST_MESSAGE_EOS: This message is only posted by sinks in the PLAYING |
| * state. If all sinks posted the EOS message, this bin will post and EOS |
| * message upwards. |
| * |
| * * GST_MESSAGE_SEGMENT_START: Just collected and never forwarded upwards. |
| * The messages are used to decide when all elements have completed playback |
| * of their segment. |
| * |
| * * GST_MESSAGE_SEGMENT_DONE: Is posted by #GstBin when all elements that posted |
| * a SEGMENT_START have posted a SEGMENT_DONE. |
| * |
| * * GST_MESSAGE_DURATION_CHANGED: Is posted by an element that detected a change |
| * in the stream duration. The default bin behaviour is to clear any |
| * cached duration values so that the next duration query will perform |
| * a full duration recalculation. The duration change is posted to the |
| * application so that it can refetch the new duration with a duration |
| * query. Note that these messages can be posted before the bin is |
| * prerolled, in which case the duration query might fail. |
| * |
| * * GST_MESSAGE_CLOCK_LOST: This message is posted by an element when it |
| * can no longer provide a clock. The default bin behaviour is to |
| * check if the lost clock was the one provided by the bin. If so and |
| * the bin is currently in the PLAYING state, the message is forwarded to |
| * the bin parent. |
| * This message is also generated when a clock provider is removed from |
| * the bin. If this message is received by the application, it should |
| * PAUSE the pipeline and set it back to PLAYING to force a new clock |
| * distribution. |
| * |
| * * GST_MESSAGE_CLOCK_PROVIDE: This message is generated when an element |
| * can provide a clock. This mostly happens when a new clock |
| * provider is added to the bin. The default behaviour of the bin is to |
| * mark the currently selected clock as dirty, which will perform a clock |
| * recalculation the next time the bin is asked to provide a clock. |
| * This message is never sent tot the application but is forwarded to |
| * the parent of the bin. |
| * |
| * * OTHERS: posted upwards. |
| * |
| * A #GstBin implements the following default behaviour for answering to a |
| * #GstQuery: |
| * |
| * * GST_QUERY_DURATION:If the query has been asked before with the same format |
| * and the bin is a toplevel bin (ie. has no parent), |
| * use the cached previous value. If no previous value was cached, the |
| * query is sent to all sink elements in the bin and the MAXIMUM of all |
| * values is returned. If the bin is a toplevel bin the value is cached. |
| * If no sinks are available in the bin, the query fails. |
| * |
| * * GST_QUERY_POSITION:The query is sent to all sink elements in the bin and the |
| * MAXIMUM of all values is returned. If no sinks are available in the bin, |
| * the query fails. |
| * |
| * * OTHERS:the query is forwarded to all sink elements, the result |
| * of the first sink that answers the query successfully is returned. If no |
| * sink is in the bin, the query fails. |
| * |
| * A #GstBin will by default forward any event sent to it to all sink |
| * (#GST_EVENT_TYPE_DOWNSTREAM) or source (#GST_EVENT_TYPE_UPSTREAM) elements |
| * depending on the event type. |
| * If all the elements return %TRUE, the bin will also return %TRUE, else %FALSE |
| * is returned. If no elements of the required type are in the bin, the event |
| * handler will return %TRUE. |
| * |
| */ |
| |
| #include "gst_private.h" |
| |
| #include "gstevent.h" |
| #include "gstbin.h" |
| #include "gstinfo.h" |
| #include "gsterror.h" |
| |
| #include "gstutils.h" |
| #include "gstchildproxy.h" |
| |
| GST_DEBUG_CATEGORY_STATIC (bin_debug); |
| #define GST_CAT_DEFAULT bin_debug |
| |
| /* a bin is toplevel if it has no parent or when it is configured to behave like |
| * a toplevel bin */ |
| #define BIN_IS_TOPLEVEL(bin) ((GST_OBJECT_PARENT (bin) == NULL) || bin->priv->asynchandling) |
| |
| #define GST_BIN_GET_PRIVATE(obj) \ |
| (G_TYPE_INSTANCE_GET_PRIVATE ((obj), GST_TYPE_BIN, GstBinPrivate)) |
| |
| struct _GstBinPrivate |
| { |
| gboolean asynchandling; |
| /* if we get an ASYNC_DONE message from ourselves, this means that the |
| * subclass will simulate ASYNC behaviour without having ASYNC children. When |
| * such an ASYNC_DONE message is posted while we are doing a state change, we |
| * have to process the message after finishing the state change even when no |
| * child returned GST_STATE_CHANGE_ASYNC. */ |
| gboolean pending_async_done; |
| |
| guint32 structure_cookie; |
| |
| #if 0 |
| /* cached index */ |
| GstIndex *index; |
| #endif |
| |
| /* forward messages from our children */ |
| gboolean message_forward; |
| |
| gboolean posted_eos; |
| gboolean posted_playing; |
| GstElementFlags suppressed_flags; |
| }; |
| |
| typedef struct |
| { |
| guint32 cookie; |
| GstState pending; |
| } BinContinueData; |
| |
| static void gst_bin_dispose (GObject * object); |
| |
| static void gst_bin_set_property (GObject * object, guint prop_id, |
| const GValue * value, GParamSpec * pspec); |
| static void gst_bin_get_property (GObject * object, guint prop_id, |
| GValue * value, GParamSpec * pspec); |
| |
| static GstStateChangeReturn gst_bin_change_state_func (GstElement * element, |
| GstStateChange transition); |
| static gboolean gst_bin_post_message (GstElement * element, GstMessage * msg); |
| static GstStateChangeReturn gst_bin_get_state_func (GstElement * element, |
| GstState * state, GstState * pending, GstClockTime timeout); |
| static void bin_handle_async_done (GstBin * bin, GstStateChangeReturn ret, |
| gboolean flag_pending, GstClockTime running_time); |
| static void bin_handle_async_start (GstBin * bin); |
| static void bin_push_state_continue (GstBin * bin, BinContinueData * data); |
| static void bin_do_eos (GstBin * bin); |
| |
| static gboolean gst_bin_add_func (GstBin * bin, GstElement * element); |
| static gboolean gst_bin_remove_func (GstBin * bin, GstElement * element); |
| static void gst_bin_deep_element_added_func (GstBin * bin, GstBin * sub_bin, |
| GstElement * element); |
| static void gst_bin_deep_element_removed_func (GstBin * bin, GstBin * sub_bin, |
| GstElement * element); |
| static void gst_bin_update_context (GstBin * bin, GstContext * context); |
| static void gst_bin_update_context_unlocked (GstBin * bin, |
| GstContext * context); |
| |
| #if 0 |
| static void gst_bin_set_index_func (GstElement * element, GstIndex * index); |
| static GstIndex *gst_bin_get_index_func (GstElement * element); |
| #endif |
| |
| static GstClock *gst_bin_provide_clock_func (GstElement * element); |
| static gboolean gst_bin_set_clock_func (GstElement * element, GstClock * clock); |
| |
| static void gst_bin_handle_message_func (GstBin * bin, GstMessage * message); |
| static gboolean gst_bin_send_event (GstElement * element, GstEvent * event); |
| static GstBusSyncReply bin_bus_handler (GstBus * bus, |
| GstMessage * message, GstBin * bin); |
| static gboolean gst_bin_query (GstElement * element, GstQuery * query); |
| static void gst_bin_set_context (GstElement * element, GstContext * context); |
| |
| static gboolean gst_bin_do_latency_func (GstBin * bin); |
| |
| static void bin_remove_messages (GstBin * bin, GstObject * src, |
| GstMessageType types); |
| static void gst_bin_continue_func (GstBin * bin, BinContinueData * data); |
| static gint bin_element_is_sink (GstElement * child, GstBin * bin); |
| static gint bin_element_is_src (GstElement * child, GstBin * bin); |
| |
| static GstIterator *gst_bin_sort_iterator_new (GstBin * bin); |
| |
| /* Bin signals and properties */ |
| enum |
| { |
| ELEMENT_ADDED, |
| ELEMENT_REMOVED, |
| DO_LATENCY, |
| DEEP_ELEMENT_ADDED, |
| DEEP_ELEMENT_REMOVED, |
| LAST_SIGNAL |
| }; |
| |
| #define DEFAULT_ASYNC_HANDLING FALSE |
| #define DEFAULT_MESSAGE_FORWARD FALSE |
| |
| enum |
| { |
| PROP_0, |
| PROP_ASYNC_HANDLING, |
| PROP_MESSAGE_FORWARD, |
| PROP_LAST |
| }; |
| |
| static void gst_bin_child_proxy_init (gpointer g_iface, gpointer iface_data); |
| |
| static guint gst_bin_signals[LAST_SIGNAL] = { 0 }; |
| |
| #define _do_init \ |
| { \ |
| static const GInterfaceInfo iface_info = { \ |
| gst_bin_child_proxy_init, \ |
| NULL, \ |
| NULL}; \ |
| \ |
| g_type_add_interface_static (g_define_type_id, GST_TYPE_CHILD_PROXY, &iface_info); \ |
| \ |
| GST_DEBUG_CATEGORY_INIT (bin_debug, "bin", GST_DEBUG_BOLD, \ |
| "debugging info for the 'bin' container element"); \ |
| \ |
| } |
| |
| #define gst_bin_parent_class parent_class |
| G_DEFINE_TYPE_WITH_CODE (GstBin, gst_bin, GST_TYPE_ELEMENT, _do_init); |
| |
| static GObject * |
| gst_bin_child_proxy_get_child_by_index (GstChildProxy * child_proxy, |
| guint index) |
| { |
| GstObject *res; |
| GstBin *bin; |
| |
| bin = GST_BIN_CAST (child_proxy); |
| |
| GST_OBJECT_LOCK (bin); |
| if ((res = g_list_nth_data (bin->children, index))) |
| gst_object_ref (res); |
| GST_OBJECT_UNLOCK (bin); |
| |
| return (GObject *) res; |
| } |
| |
| static guint |
| gst_bin_child_proxy_get_children_count (GstChildProxy * child_proxy) |
| { |
| guint num; |
| GstBin *bin; |
| |
| bin = GST_BIN_CAST (child_proxy); |
| |
| GST_OBJECT_LOCK (bin); |
| num = bin->numchildren; |
| GST_OBJECT_UNLOCK (bin); |
| |
| return num; |
| } |
| |
| static void |
| gst_bin_child_proxy_init (gpointer g_iface, gpointer iface_data) |
| { |
| GstChildProxyInterface *iface = g_iface; |
| |
| iface->get_children_count = gst_bin_child_proxy_get_children_count; |
| iface->get_child_by_index = gst_bin_child_proxy_get_child_by_index; |
| } |
| |
| static gboolean |
| _gst_boolean_accumulator (GSignalInvocationHint * ihint, |
| GValue * return_accu, const GValue * handler_return, gpointer dummy) |
| { |
| gboolean myboolean; |
| |
| myboolean = g_value_get_boolean (handler_return); |
| if (!(ihint->run_type & G_SIGNAL_RUN_CLEANUP)) |
| g_value_set_boolean (return_accu, myboolean); |
| |
| GST_DEBUG ("invocation %d, %d", ihint->run_type, myboolean); |
| |
| /* stop emission */ |
| return FALSE; |
| } |
| |
| static void |
| gst_bin_class_init (GstBinClass * klass) |
| { |
| GObjectClass *gobject_class; |
| GstElementClass *gstelement_class; |
| |
| gobject_class = (GObjectClass *) klass; |
| gstelement_class = (GstElementClass *) klass; |
| |
| g_type_class_add_private (klass, sizeof (GstBinPrivate)); |
| |
| gobject_class->set_property = gst_bin_set_property; |
| gobject_class->get_property = gst_bin_get_property; |
| |
| /** |
| * GstBin:async-handling: |
| * |
| * If set to %TRUE, the bin will handle asynchronous state changes. |
| * This should be used only if the bin subclass is modifying the state |
| * of its children on its own. |
| */ |
| g_object_class_install_property (gobject_class, PROP_ASYNC_HANDLING, |
| g_param_spec_boolean ("async-handling", "Async Handling", |
| "The bin will handle Asynchronous state changes", |
| DEFAULT_ASYNC_HANDLING, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| |
| /** |
| * GstBin::element-added: |
| * @bin: the #GstBin |
| * @element: the #GstElement that was added to the bin |
| * |
| * Will be emitted after the element was added to the bin. |
| */ |
| gst_bin_signals[ELEMENT_ADDED] = |
| g_signal_new ("element-added", G_TYPE_FROM_CLASS (klass), |
| G_SIGNAL_RUN_FIRST, G_STRUCT_OFFSET (GstBinClass, element_added), NULL, |
| NULL, g_cclosure_marshal_generic, G_TYPE_NONE, 1, GST_TYPE_ELEMENT); |
| /** |
| * GstBin::element-removed: |
| * @bin: the #GstBin |
| * @element: the #GstElement that was removed from the bin |
| * |
| * Will be emitted after the element was removed from the bin. |
| */ |
| gst_bin_signals[ELEMENT_REMOVED] = |
| g_signal_new ("element-removed", G_TYPE_FROM_CLASS (klass), |
| G_SIGNAL_RUN_FIRST, G_STRUCT_OFFSET (GstBinClass, element_removed), NULL, |
| NULL, g_cclosure_marshal_generic, G_TYPE_NONE, 1, GST_TYPE_ELEMENT); |
| /** |
| * GstBin::deep-element-added: |
| * @bin: the #GstBin |
| * @sub_bin: the #GstBin the element was added to |
| * @element: the #GstElement that was added to @sub_bin |
| * |
| * Will be emitted after the element was added to sub_bin. |
| * |
| * Since: 1.10 |
| */ |
| gst_bin_signals[DEEP_ELEMENT_ADDED] = |
| g_signal_new ("deep-element-added", G_TYPE_FROM_CLASS (klass), |
| G_SIGNAL_RUN_FIRST, G_STRUCT_OFFSET (GstBinClass, deep_element_added), |
| NULL, NULL, g_cclosure_marshal_generic, G_TYPE_NONE, 2, GST_TYPE_BIN, |
| GST_TYPE_ELEMENT); |
| /** |
| * GstBin::deep-element-removed: |
| * @bin: the #GstBin |
| * @sub_bin: the #GstBin the element was removed from |
| * @element: the #GstElement that was removed from @sub_bin |
| * |
| * Will be emitted after the element was removed from sub_bin. |
| * |
| * Since: 1.10 |
| */ |
| gst_bin_signals[DEEP_ELEMENT_REMOVED] = |
| g_signal_new ("deep-element-removed", G_TYPE_FROM_CLASS (klass), |
| G_SIGNAL_RUN_FIRST, G_STRUCT_OFFSET (GstBinClass, deep_element_removed), |
| NULL, NULL, g_cclosure_marshal_generic, G_TYPE_NONE, 2, GST_TYPE_BIN, |
| GST_TYPE_ELEMENT); |
| /** |
| * GstBin::do-latency: |
| * @bin: the #GstBin |
| * |
| * Will be emitted when the bin needs to perform latency calculations. This |
| * signal is only emitted for toplevel bins or when async-handling is |
| * enabled. |
| * |
| * Only one signal handler is invoked. If no signals are connected, the |
| * default handler is invoked, which will query and distribute the lowest |
| * possible latency to all sinks. |
| * |
| * Connect to this signal if the default latency calculations are not |
| * sufficient, like when you need different latencies for different sinks in |
| * the same pipeline. |
| */ |
| gst_bin_signals[DO_LATENCY] = |
| g_signal_new ("do-latency", G_TYPE_FROM_CLASS (klass), |
| G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstBinClass, do_latency), |
| _gst_boolean_accumulator, NULL, g_cclosure_marshal_generic, |
| G_TYPE_BOOLEAN, 0, G_TYPE_NONE); |
| |
| /** |
| * GstBin:message-forward: |
| * |
| * Forward all children messages, even those that would normally be filtered by |
| * the bin. This can be interesting when one wants to be notified of the EOS |
| * state of individual elements, for example. |
| * |
| * The messages are converted to an ELEMENT message with the bin as the |
| * source. The structure of the message is named 'GstBinForwarded' and contains |
| * a field named 'message' of type GST_TYPE_MESSAGE that contains the original |
| * forwarded message. |
| */ |
| g_object_class_install_property (gobject_class, PROP_MESSAGE_FORWARD, |
| g_param_spec_boolean ("message-forward", "Message Forward", |
| "Forwards all children messages", |
| DEFAULT_MESSAGE_FORWARD, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| |
| gobject_class->dispose = gst_bin_dispose; |
| |
| gst_element_class_set_static_metadata (gstelement_class, "Generic bin", |
| "Generic/Bin", |
| "Simple container object", |
| "Erik Walthinsen <omega@cse.ogi.edu>," |
| "Wim Taymans <wim.taymans@gmail.com>"); |
| |
| gstelement_class->change_state = |
| GST_DEBUG_FUNCPTR (gst_bin_change_state_func); |
| gstelement_class->post_message = GST_DEBUG_FUNCPTR (gst_bin_post_message); |
| gstelement_class->get_state = GST_DEBUG_FUNCPTR (gst_bin_get_state_func); |
| #if 0 |
| gstelement_class->get_index = GST_DEBUG_FUNCPTR (gst_bin_get_index_func); |
| gstelement_class->set_index = GST_DEBUG_FUNCPTR (gst_bin_set_index_func); |
| #endif |
| gstelement_class->provide_clock = |
| GST_DEBUG_FUNCPTR (gst_bin_provide_clock_func); |
| gstelement_class->set_clock = GST_DEBUG_FUNCPTR (gst_bin_set_clock_func); |
| |
| gstelement_class->send_event = GST_DEBUG_FUNCPTR (gst_bin_send_event); |
| gstelement_class->query = GST_DEBUG_FUNCPTR (gst_bin_query); |
| gstelement_class->set_context = GST_DEBUG_FUNCPTR (gst_bin_set_context); |
| |
| klass->add_element = GST_DEBUG_FUNCPTR (gst_bin_add_func); |
| klass->remove_element = GST_DEBUG_FUNCPTR (gst_bin_remove_func); |
| klass->handle_message = GST_DEBUG_FUNCPTR (gst_bin_handle_message_func); |
| |
| klass->deep_element_added = gst_bin_deep_element_added_func; |
| klass->deep_element_removed = gst_bin_deep_element_removed_func; |
| |
| klass->do_latency = GST_DEBUG_FUNCPTR (gst_bin_do_latency_func); |
| } |
| |
| static void |
| gst_bin_init (GstBin * bin) |
| { |
| GstBus *bus; |
| |
| bin->numchildren = 0; |
| bin->children = NULL; |
| bin->children_cookie = 0; |
| bin->messages = NULL; |
| bin->provided_clock = NULL; |
| bin->clock_dirty = FALSE; |
| |
| /* Set up a bus for listening to child elements */ |
| bus = g_object_new (GST_TYPE_BUS, "enable-async", FALSE, NULL); |
| gst_object_ref_sink (bus); |
| bin->child_bus = bus; |
| GST_DEBUG_OBJECT (bin, "using bus %" GST_PTR_FORMAT " to listen to children", |
| bus); |
| gst_bus_set_sync_handler (bus, (GstBusSyncHandler) bin_bus_handler, bin, |
| NULL); |
| |
| bin->priv = GST_BIN_GET_PRIVATE (bin); |
| bin->priv->asynchandling = DEFAULT_ASYNC_HANDLING; |
| bin->priv->structure_cookie = 0; |
| bin->priv->message_forward = DEFAULT_MESSAGE_FORWARD; |
| } |
| |
| static void |
| gst_bin_dispose (GObject * object) |
| { |
| GstBin *bin = GST_BIN_CAST (object); |
| GstBus **child_bus_p = &bin->child_bus; |
| GstClock **provided_clock_p = &bin->provided_clock; |
| GstElement **clock_provider_p = &bin->clock_provider; |
| |
| GST_CAT_DEBUG_OBJECT (GST_CAT_REFCOUNTING, object, "%p dispose", object); |
| |
| GST_OBJECT_LOCK (object); |
| gst_object_replace ((GstObject **) child_bus_p, NULL); |
| gst_object_replace ((GstObject **) provided_clock_p, NULL); |
| gst_object_replace ((GstObject **) clock_provider_p, NULL); |
| bin_remove_messages (bin, NULL, GST_MESSAGE_ANY); |
| GST_OBJECT_UNLOCK (object); |
| |
| while (bin->children) { |
| gst_bin_remove (bin, GST_ELEMENT_CAST (bin->children->data)); |
| } |
| if (G_UNLIKELY (bin->children != NULL)) { |
| g_critical ("could not remove elements from bin '%s'", |
| GST_STR_NULL (GST_OBJECT_NAME (object))); |
| } |
| |
| G_OBJECT_CLASS (parent_class)->dispose (object); |
| } |
| |
| /** |
| * gst_bin_new: |
| * @name: (allow-none): the name of the new bin |
| * |
| * Creates a new bin with the given name. |
| * |
| * Returns: (transfer floating): a new #GstBin |
| */ |
| GstElement * |
| gst_bin_new (const gchar * name) |
| { |
| return gst_element_factory_make ("bin", name); |
| } |
| |
| static void |
| gst_bin_set_property (GObject * object, guint prop_id, |
| const GValue * value, GParamSpec * pspec) |
| { |
| GstBin *gstbin; |
| |
| gstbin = GST_BIN_CAST (object); |
| |
| switch (prop_id) { |
| case PROP_ASYNC_HANDLING: |
| GST_OBJECT_LOCK (gstbin); |
| gstbin->priv->asynchandling = g_value_get_boolean (value); |
| GST_OBJECT_UNLOCK (gstbin); |
| break; |
| case PROP_MESSAGE_FORWARD: |
| GST_OBJECT_LOCK (gstbin); |
| gstbin->priv->message_forward = g_value_get_boolean (value); |
| GST_OBJECT_UNLOCK (gstbin); |
| break; |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static void |
| gst_bin_get_property (GObject * object, guint prop_id, |
| GValue * value, GParamSpec * pspec) |
| { |
| GstBin *gstbin; |
| |
| gstbin = GST_BIN_CAST (object); |
| |
| switch (prop_id) { |
| case PROP_ASYNC_HANDLING: |
| GST_OBJECT_LOCK (gstbin); |
| g_value_set_boolean (value, gstbin->priv->asynchandling); |
| GST_OBJECT_UNLOCK (gstbin); |
| break; |
| case PROP_MESSAGE_FORWARD: |
| GST_OBJECT_LOCK (gstbin); |
| g_value_set_boolean (value, gstbin->priv->message_forward); |
| GST_OBJECT_UNLOCK (gstbin); |
| break; |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); |
| break; |
| } |
| } |
| |
| #if 0 |
| /* return the cached index */ |
| static GstIndex * |
| gst_bin_get_index_func (GstElement * element) |
| { |
| GstBin *bin; |
| GstIndex *result; |
| |
| bin = GST_BIN_CAST (element); |
| |
| GST_OBJECT_LOCK (bin); |
| if ((result = bin->priv->index)) |
| gst_object_ref (result); |
| GST_OBJECT_UNLOCK (bin); |
| |
| return result; |
| } |
| |
| /* set the index on all elements in this bin |
| * |
| * MT safe |
| */ |
| static void |
| gst_bin_set_index_func (GstElement * element, GstIndex * index) |
| { |
| GstBin *bin; |
| gboolean done; |
| GstIterator *it; |
| GstIndex *old; |
| GValue data = { 0, }; |
| |
| bin = GST_BIN_CAST (element); |
| |
| GST_OBJECT_LOCK (bin); |
| old = bin->priv->index; |
| if (G_UNLIKELY (old == index)) |
| goto was_set; |
| if (index) |
| gst_object_ref (index); |
| bin->priv->index = index; |
| GST_OBJECT_UNLOCK (bin); |
| |
| if (old) |
| gst_object_unref (old); |
| |
| it = gst_bin_iterate_elements (bin); |
| |
| /* set the index on all elements in the bin */ |
| done = FALSE; |
| while (!done) { |
| switch (gst_iterator_next (it, &data)) { |
| case GST_ITERATOR_OK: |
| { |
| GstElement *child = g_value_get_object (&data); |
| |
| GST_DEBUG_OBJECT (bin, "setting index on '%s'", |
| GST_ELEMENT_NAME (child)); |
| gst_element_set_index (child, index); |
| |
| g_value_reset (&data); |
| break; |
| } |
| case GST_ITERATOR_RESYNC: |
| GST_DEBUG_OBJECT (bin, "iterator doing resync"); |
| gst_iterator_resync (it); |
| break; |
| default: |
| case GST_ITERATOR_DONE: |
| GST_DEBUG_OBJECT (bin, "iterator done"); |
| done = TRUE; |
| break; |
| } |
| } |
| g_value_unset (&data); |
| gst_iterator_free (it); |
| return; |
| |
| was_set: |
| { |
| GST_DEBUG_OBJECT (bin, "index was already set"); |
| GST_OBJECT_UNLOCK (bin); |
| return; |
| } |
| } |
| #endif |
| |
| /* set the clock on all elements in this bin |
| * |
| * MT safe |
| */ |
| static gboolean |
| gst_bin_set_clock_func (GstElement * element, GstClock * clock) |
| { |
| GstBin *bin; |
| gboolean done; |
| GstIterator *it; |
| gboolean res = TRUE; |
| GValue data = { 0, }; |
| |
| bin = GST_BIN_CAST (element); |
| |
| it = gst_bin_iterate_elements (bin); |
| |
| done = FALSE; |
| while (!done) { |
| switch (gst_iterator_next (it, &data)) { |
| case GST_ITERATOR_OK: |
| { |
| GstElement *child = g_value_get_object (&data); |
| |
| res &= gst_element_set_clock (child, clock); |
| |
| g_value_reset (&data); |
| break; |
| } |
| case GST_ITERATOR_RESYNC: |
| GST_DEBUG_OBJECT (bin, "iterator doing resync"); |
| gst_iterator_resync (it); |
| res = TRUE; |
| break; |
| default: |
| case GST_ITERATOR_DONE: |
| GST_DEBUG_OBJECT (bin, "iterator done"); |
| done = TRUE; |
| break; |
| } |
| } |
| g_value_unset (&data); |
| gst_iterator_free (it); |
| |
| if (res) |
| res = GST_ELEMENT_CLASS (parent_class)->set_clock (element, clock); |
| |
| return res; |
| } |
| |
| /* get the clock for this bin by asking all of the children in this bin |
| * |
| * The ref of the returned clock in increased so unref after usage. |
| * |
| * We loop the elements in state order and pick the last clock we can |
| * get. This makes sure we get a clock from the source. |
| * |
| * MT safe |
| */ |
| static GstClock * |
| gst_bin_provide_clock_func (GstElement * element) |
| { |
| GstClock *result = NULL; |
| GstElement *provider = NULL; |
| GstBin *bin; |
| GstIterator *it; |
| gboolean done; |
| GValue val = { 0, }; |
| GstClock **provided_clock_p; |
| GstElement **clock_provider_p; |
| |
| bin = GST_BIN_CAST (element); |
| |
| GST_OBJECT_LOCK (bin); |
| if (!bin->clock_dirty) |
| goto not_dirty; |
| |
| GST_DEBUG_OBJECT (bin, "finding new clock"); |
| |
| it = gst_bin_sort_iterator_new (bin); |
| GST_OBJECT_UNLOCK (bin); |
| |
| done = FALSE; |
| while (!done) { |
| switch (gst_iterator_next (it, &val)) { |
| case GST_ITERATOR_OK: |
| { |
| GstElement *child = g_value_get_object (&val); |
| GstClock *clock; |
| |
| clock = gst_element_provide_clock (child); |
| if (clock) { |
| GST_DEBUG_OBJECT (bin, "found candidate clock %p by element %s", |
| clock, GST_ELEMENT_NAME (child)); |
| if (result) { |
| gst_object_unref (result); |
| gst_object_unref (provider); |
| } |
| result = clock; |
| provider = gst_object_ref (child); |
| } |
| |
| g_value_reset (&val); |
| break; |
| } |
| case GST_ITERATOR_RESYNC: |
| gst_iterator_resync (it); |
| break; |
| default: |
| case GST_ITERATOR_DONE: |
| done = TRUE; |
| break; |
| } |
| } |
| g_value_unset (&val); |
| gst_iterator_free (it); |
| |
| GST_OBJECT_LOCK (bin); |
| if (!bin->clock_dirty) { |
| if (provider) |
| gst_object_unref (provider); |
| if (result) |
| gst_object_unref (result); |
| result = NULL; |
| |
| goto not_dirty; |
| } |
| |
| provided_clock_p = &bin->provided_clock; |
| clock_provider_p = &bin->clock_provider; |
| gst_object_replace ((GstObject **) provided_clock_p, (GstObject *) result); |
| gst_object_replace ((GstObject **) clock_provider_p, (GstObject *) provider); |
| bin->clock_dirty = FALSE; |
| GST_DEBUG_OBJECT (bin, |
| "provided new clock %" GST_PTR_FORMAT " by provider %" GST_PTR_FORMAT, |
| result, provider); |
| /* Provider is not being returned to caller, just the result */ |
| if (provider) |
| gst_object_unref (provider); |
| GST_OBJECT_UNLOCK (bin); |
| |
| return result; |
| |
| not_dirty: |
| { |
| if ((result = bin->provided_clock)) |
| gst_object_ref (result); |
| GST_DEBUG_OBJECT (bin, "returning old clock %p", result); |
| GST_OBJECT_UNLOCK (bin); |
| |
| return result; |
| } |
| } |
| |
| /* |
| * functions for manipulating cached messages |
| */ |
| typedef struct |
| { |
| GstObject *src; |
| GstMessageType types; |
| } MessageFind; |
| |
| /* check if a message is of given src and type */ |
| static gint |
| message_check (GstMessage * message, MessageFind * target) |
| { |
| gboolean eq = TRUE; |
| |
| if (target->src) |
| eq &= GST_MESSAGE_SRC (message) == target->src; |
| if (target->types) |
| eq &= (GST_MESSAGE_TYPE (message) & target->types) != 0; |
| GST_LOG ("looking at message %p: %d", message, eq); |
| |
| return (eq ? 0 : 1); |
| } |
| |
| static GList * |
| find_message (GstBin * bin, GstObject * src, GstMessageType types) |
| { |
| GList *result; |
| MessageFind find; |
| |
| find.src = src; |
| find.types = types; |
| |
| result = g_list_find_custom (bin->messages, &find, |
| (GCompareFunc) message_check); |
| |
| if (result) { |
| GST_DEBUG_OBJECT (bin, "we found a message %p from %s matching types %08x", |
| result->data, GST_OBJECT_NAME (GST_MESSAGE_CAST (result->data)->src), |
| types); |
| } else { |
| GST_DEBUG_OBJECT (bin, "no message found matching types %08x", types); |
| #ifndef GST_DISABLE_GST_DEBUG |
| { |
| guint i; |
| |
| for (i = 0; i < 32; i++) |
| if (types & (1U << i)) |
| GST_DEBUG_OBJECT (bin, " %s", gst_message_type_get_name (1U << i)); |
| } |
| #endif |
| } |
| |
| return result; |
| } |
| |
| /* with LOCK, returns TRUE if message had a valid SRC, takes ownership of |
| * the message. |
| * |
| * A message that is cached and has the same SRC and type is replaced |
| * by the given message. |
| */ |
| static gboolean |
| bin_replace_message (GstBin * bin, GstMessage * message, GstMessageType types) |
| { |
| GList *previous; |
| GstObject *src; |
| gboolean res = TRUE; |
| |
| if ((src = GST_MESSAGE_SRC (message))) { |
| /* first find the previous message posted by this element */ |
| if ((previous = find_message (bin, src, types))) { |
| GstMessage *previous_msg; |
| |
| /* if we found a previous message, replace it */ |
| previous_msg = previous->data; |
| previous->data = message; |
| |
| GST_DEBUG_OBJECT (bin, "replace old message %s from %s with %s message", |
| GST_MESSAGE_TYPE_NAME (previous_msg), GST_ELEMENT_NAME (src), |
| GST_MESSAGE_TYPE_NAME (message)); |
| |
| gst_message_unref (previous_msg); |
| } else { |
| /* keep new message */ |
| bin->messages = g_list_prepend (bin->messages, message); |
| |
| GST_DEBUG_OBJECT (bin, "got new message %p, %s from %s", |
| message, GST_MESSAGE_TYPE_NAME (message), GST_ELEMENT_NAME (src)); |
| } |
| } else { |
| GST_DEBUG_OBJECT (bin, "got message %s from (NULL), not processing", |
| GST_MESSAGE_TYPE_NAME (message)); |
| res = FALSE; |
| gst_message_unref (message); |
| } |
| return res; |
| } |
| |
| /* with LOCK. Remove all messages of given types */ |
| static void |
| bin_remove_messages (GstBin * bin, GstObject * src, GstMessageType types) |
| { |
| MessageFind find; |
| GList *walk, *next; |
| |
| find.src = src; |
| find.types = types; |
| |
| for (walk = bin->messages; walk; walk = next) { |
| GstMessage *message = (GstMessage *) walk->data; |
| |
| next = g_list_next (walk); |
| |
| if (message_check (message, &find) == 0) { |
| GST_DEBUG_OBJECT (GST_MESSAGE_SRC (message), |
| "deleting message %p of type %s (types 0x%08x)", message, |
| GST_MESSAGE_TYPE_NAME (message), types); |
| bin->messages = g_list_delete_link (bin->messages, walk); |
| gst_message_unref (message); |
| } else { |
| GST_DEBUG_OBJECT (GST_MESSAGE_SRC (message), |
| "not deleting message %p of type 0x%08x", message, |
| GST_MESSAGE_TYPE (message)); |
| } |
| } |
| } |
| |
| |
| /* Check if the bin is EOS. We do this by scanning all sinks and |
| * checking if they posted an EOS message. |
| * |
| * call with bin LOCK */ |
| static gboolean |
| is_eos (GstBin * bin, guint32 * seqnum) |
| { |
| gboolean result; |
| gint n_eos = 0; |
| GList *walk, *msgs; |
| |
| result = TRUE; |
| for (walk = bin->children; walk; walk = g_list_next (walk)) { |
| GstElement *element; |
| |
| element = GST_ELEMENT_CAST (walk->data); |
| if (bin_element_is_sink (element, bin) == 0) { |
| /* check if element posted EOS */ |
| if ((msgs = |
| find_message (bin, GST_OBJECT_CAST (element), GST_MESSAGE_EOS))) { |
| GST_DEBUG ("sink '%s' posted EOS", GST_ELEMENT_NAME (element)); |
| *seqnum = gst_message_get_seqnum (GST_MESSAGE_CAST (msgs->data)); |
| n_eos++; |
| } else { |
| GST_DEBUG ("sink '%s' did not post EOS yet", |
| GST_ELEMENT_NAME (element)); |
| result = FALSE; |
| break; |
| } |
| } |
| } |
| /* FIXME: Some tests (e.g. elements/capsfilter) use |
| * pipelines with a dangling sinkpad but no sink element. |
| * These tests assume that no EOS message is ever |
| * posted on the bus so let's keep that behaviour. |
| * In valid pipelines this doesn't make a difference. |
| */ |
| return result && n_eos > 0; |
| } |
| |
| |
| /* Check if the bin is STREAM_START. We do this by scanning all sinks and |
| * checking if they posted an STREAM_START message. |
| * |
| * call with bin LOCK */ |
| static gboolean |
| is_stream_start (GstBin * bin, guint32 * seqnum, gboolean * have_group_id, |
| guint * group_id) |
| { |
| gboolean result; |
| GList *walk, *msgs; |
| guint tmp_group_id; |
| gboolean first = TRUE, same_group_id = TRUE; |
| |
| *have_group_id = TRUE; |
| *group_id = 0; |
| result = TRUE; |
| for (walk = bin->children; walk; walk = g_list_next (walk)) { |
| GstElement *element; |
| |
| element = GST_ELEMENT_CAST (walk->data); |
| if (bin_element_is_sink (element, bin) == 0) { |
| /* check if element posted STREAM_START */ |
| if ((msgs = |
| find_message (bin, GST_OBJECT_CAST (element), |
| GST_MESSAGE_STREAM_START))) { |
| GST_DEBUG ("sink '%s' posted STREAM_START", GST_ELEMENT_NAME (element)); |
| *seqnum = gst_message_get_seqnum (GST_MESSAGE_CAST (msgs->data)); |
| if (gst_message_parse_group_id (GST_MESSAGE_CAST (msgs->data), |
| &tmp_group_id)) { |
| if (first) { |
| first = FALSE; |
| *group_id = tmp_group_id; |
| } else { |
| if (tmp_group_id != *group_id) |
| same_group_id = FALSE; |
| } |
| } else { |
| *have_group_id = FALSE; |
| } |
| } else { |
| GST_DEBUG ("sink '%s' did not post STREAM_START yet", |
| GST_ELEMENT_NAME (element)); |
| result = FALSE; |
| break; |
| } |
| } |
| } |
| |
| /* If all have a group_id we only consider this stream started |
| * if all group ids were the same and all sinks posted a stream-start |
| * message */ |
| if (*have_group_id) |
| return same_group_id && result; |
| /* otherwise consider this stream started after all sinks |
| * have reported stream-start for backward compatibility. |
| * FIXME 2.0: This should go away! */ |
| return result; |
| } |
| |
| static void |
| unlink_pads (const GValue * item, gpointer user_data) |
| { |
| GstPad *pad; |
| GstPad *peer; |
| |
| pad = g_value_get_object (item); |
| |
| if ((peer = gst_pad_get_peer (pad))) { |
| if (gst_pad_get_direction (pad) == GST_PAD_SRC) |
| gst_pad_unlink (pad, peer); |
| else |
| gst_pad_unlink (peer, pad); |
| gst_object_unref (peer); |
| } |
| } |
| |
| static void |
| bin_deep_iterator_foreach (const GValue * item, gpointer user_data) |
| { |
| GQueue *queue = user_data; |
| |
| g_queue_push_tail (queue, g_value_dup_object (item)); |
| } |
| |
| static void |
| gst_bin_do_deep_add_remove (GstBin * bin, gint sig_id, const gchar * sig_name, |
| GstElement * element) |
| { |
| g_signal_emit (bin, sig_id, 0, bin, element); |
| |
| /* When removing a bin, emit deep-element-* for everything in the bin too */ |
| if (GST_IS_BIN (element)) { |
| GstIterator *it; |
| GstIteratorResult ires; |
| GQueue elements = G_QUEUE_INIT; |
| |
| GST_LOG_OBJECT (bin, "Recursing into bin %" GST_PTR_FORMAT " for %s", |
| element, sig_name); |
| it = gst_bin_iterate_recurse (GST_BIN_CAST (element)); |
| do { |
| ires = gst_iterator_foreach (it, bin_deep_iterator_foreach, &elements); |
| if (ires != GST_ITERATOR_DONE) { |
| g_queue_foreach (&elements, (GFunc) g_object_unref, NULL); |
| g_queue_clear (&elements); |
| } |
| if (ires == GST_ITERATOR_RESYNC) |
| gst_iterator_resync (it); |
| } while (ires == GST_ITERATOR_RESYNC); |
| if (ires != GST_ITERATOR_ERROR) { |
| GstElement *e; |
| |
| while ((e = g_queue_pop_head (&elements))) { |
| GstObject *parent = gst_object_get_parent (GST_OBJECT_CAST (e)); |
| |
| GST_LOG_OBJECT (bin, "calling %s for element %" GST_PTR_FORMAT |
| " in bin %" GST_PTR_FORMAT, sig_name, e, parent); |
| g_signal_emit (bin, sig_id, 0, parent, e); |
| gst_object_unref (parent); |
| g_object_unref (e); |
| } |
| } |
| gst_iterator_free (it); |
| } |
| } |
| |
| /* vmethod that adds an element to a bin |
| * |
| * MT safe |
| */ |
| static gboolean |
| gst_bin_add_func (GstBin * bin, GstElement * element) |
| { |
| gchar *elem_name; |
| GstIterator *it; |
| gboolean is_sink, is_source, provides_clock, requires_clock; |
| GstMessage *clock_message = NULL, *async_message = NULL; |
| GstStateChangeReturn ret; |
| GList *l, *elem_contexts, *need_context_messages; |
| |
| GST_DEBUG_OBJECT (bin, "element :%s", GST_ELEMENT_NAME (element)); |
| |
| /* we obviously can't add ourself to ourself */ |
| if (G_UNLIKELY (element == GST_ELEMENT_CAST (bin))) |
| goto adding_itself; |
| |
| /* get the element name to make sure it is unique in this bin. */ |
| GST_OBJECT_LOCK (element); |
| elem_name = g_strdup (GST_ELEMENT_NAME (element)); |
| is_sink = GST_OBJECT_FLAG_IS_SET (element, GST_ELEMENT_FLAG_SINK); |
| is_source = GST_OBJECT_FLAG_IS_SET (element, GST_ELEMENT_FLAG_SOURCE); |
| provides_clock = |
| GST_OBJECT_FLAG_IS_SET (element, GST_ELEMENT_FLAG_PROVIDE_CLOCK); |
| requires_clock = |
| GST_OBJECT_FLAG_IS_SET (element, GST_ELEMENT_FLAG_REQUIRE_CLOCK); |
| GST_OBJECT_UNLOCK (element); |
| |
| GST_OBJECT_LOCK (bin); |
| |
| /* then check to see if the element's name is already taken in the bin, |
| * we can safely take the lock here. This check is probably bogus because |
| * you can safely change the element name after this check and before setting |
| * the object parent. The window is very small though... */ |
| if (G_UNLIKELY (!gst_object_check_uniqueness (bin->children, elem_name))) |
| goto duplicate_name; |
| |
| /* set the element's parent and add the element to the bin's list of children */ |
| if (G_UNLIKELY (!gst_object_set_parent (GST_OBJECT_CAST (element), |
| GST_OBJECT_CAST (bin)))) |
| goto had_parent; |
| |
| /* if we add a sink we become a sink */ |
| if (is_sink && !(bin->priv->suppressed_flags & GST_ELEMENT_FLAG_SINK)) { |
| GST_CAT_DEBUG_OBJECT (GST_CAT_PARENTAGE, bin, "element \"%s\" was sink", |
| elem_name); |
| GST_OBJECT_FLAG_SET (bin, GST_ELEMENT_FLAG_SINK); |
| } |
| if (is_source && !(bin->priv->suppressed_flags & GST_ELEMENT_FLAG_SOURCE)) { |
| GST_CAT_DEBUG_OBJECT (GST_CAT_PARENTAGE, bin, "element \"%s\" was source", |
| elem_name); |
| GST_OBJECT_FLAG_SET (bin, GST_ELEMENT_FLAG_SOURCE); |
| } |
| if (provides_clock |
| && !(bin->priv->suppressed_flags & GST_ELEMENT_FLAG_PROVIDE_CLOCK)) { |
| GST_DEBUG_OBJECT (bin, "element \"%s\" can provide a clock", elem_name); |
| clock_message = |
| gst_message_new_clock_provide (GST_OBJECT_CAST (element), NULL, TRUE); |
| GST_OBJECT_FLAG_SET (bin, GST_ELEMENT_FLAG_PROVIDE_CLOCK); |
| } |
| if (requires_clock |
| && !(bin->priv->suppressed_flags & GST_ELEMENT_FLAG_REQUIRE_CLOCK)) { |
| GST_DEBUG_OBJECT (bin, "element \"%s\" requires a clock", elem_name); |
| GST_OBJECT_FLAG_SET (bin, GST_ELEMENT_FLAG_REQUIRE_CLOCK); |
| } |
| |
| bin->children = g_list_prepend (bin->children, element); |
| bin->numchildren++; |
| bin->children_cookie++; |
| if (!GST_BIN_IS_NO_RESYNC (bin)) |
| bin->priv->structure_cookie++; |
| |
| /* distribute the bus */ |
| gst_element_set_bus (element, bin->child_bus); |
| |
| /* propagate the current base_time, start_time and clock */ |
| gst_element_set_base_time (element, GST_ELEMENT_CAST (bin)->base_time); |
| gst_element_set_start_time (element, GST_ELEMENT_START_TIME (bin)); |
| /* it's possible that the element did not accept the clock but |
| * that is not important right now. When the pipeline goes to PLAYING, |
| * a new clock will be selected */ |
| gst_element_set_clock (element, GST_ELEMENT_CLOCK (bin)); |
| |
| /* get the element's list of contexts before propagating our own */ |
| elem_contexts = gst_element_get_contexts (element); |
| for (l = GST_ELEMENT_CAST (bin)->contexts; l; l = l->next) |
| gst_element_set_context (element, l->data); |
| |
| need_context_messages = NULL; |
| for (l = elem_contexts; l; l = l->next) { |
| GstContext *replacement, *context = l->data; |
| const gchar *context_type; |
| |
| context_type = gst_context_get_context_type (context); |
| |
| /* we already set this context above? */ |
| replacement = |
| gst_element_get_context_unlocked (GST_ELEMENT (bin), context_type); |
| if (replacement) { |
| gst_context_unref (replacement); |
| } else { |
| GstMessage *msg; |
| GstStructure *s; |
| |
| /* ask our parent for the context */ |
| msg = gst_message_new_need_context (GST_OBJECT_CAST (bin), context_type); |
| s = (GstStructure *) gst_message_get_structure (msg); |
| gst_structure_set (s, "bin.old.context", GST_TYPE_CONTEXT, context, NULL); |
| |
| need_context_messages = g_list_prepend (need_context_messages, msg); |
| } |
| } |
| |
| #if 0 |
| /* set the cached index on the children */ |
| if (bin->priv->index) |
| gst_element_set_index (element, bin->priv->index); |
| #endif |
| |
| ret = GST_STATE_RETURN (bin); |
| /* no need to update the state if we are in error */ |
| if (ret == GST_STATE_CHANGE_FAILURE) |
| goto no_state_recalc; |
| |
| /* update the bin state, the new element could have been an ASYNC or |
| * NO_PREROLL element */ |
| ret = GST_STATE_RETURN (element); |
| GST_DEBUG_OBJECT (bin, "added %s element", |
| gst_element_state_change_return_get_name (ret)); |
| |
| switch (ret) { |
| case GST_STATE_CHANGE_ASYNC: |
| { |
| /* create message to track this aync element when it posts an async-done |
| * message */ |
| async_message = gst_message_new_async_start (GST_OBJECT_CAST (element)); |
| break; |
| } |
| case GST_STATE_CHANGE_NO_PREROLL: |
| /* ignore all async elements we might have and commit our state */ |
| bin_handle_async_done (bin, ret, FALSE, GST_CLOCK_TIME_NONE); |
| break; |
| case GST_STATE_CHANGE_FAILURE: |
| break; |
| default: |
| break; |
| } |
| |
| no_state_recalc: |
| GST_OBJECT_UNLOCK (bin); |
| |
| for (l = need_context_messages; l; l = l->next) { |
| GstMessage *msg = l->data; |
| GstStructure *s; |
| const gchar *context_type; |
| GstContext *replacement, *context; |
| |
| gst_message_parse_context_type (msg, &context_type); |
| |
| GST_LOG_OBJECT (bin, "asking parent for context type: %s " |
| "from %" GST_PTR_FORMAT, context_type, element); |
| |
| s = (GstStructure *) gst_message_get_structure (msg); |
| gst_structure_get (s, "bin.old.context", GST_TYPE_CONTEXT, &context, NULL); |
| gst_structure_remove_field (s, "bin.old.context"); |
| gst_element_post_message (GST_ELEMENT_CAST (bin), msg); |
| |
| /* lock to avoid losing a potential write */ |
| GST_OBJECT_LOCK (bin); |
| replacement = |
| gst_element_get_context_unlocked (GST_ELEMENT_CAST (bin), context_type); |
| |
| if (replacement) { |
| /* we got the context set from GstElement::set_context */ |
| gst_context_unref (replacement); |
| GST_OBJECT_UNLOCK (bin); |
| } else { |
| /* Propagate the element's context upwards */ |
| GST_LOG_OBJECT (bin, "propagating existing context type: %s %p " |
| "from %" GST_PTR_FORMAT, context_type, context, element); |
| |
| gst_bin_update_context_unlocked (bin, context); |
| |
| msg = |
| gst_message_new_have_context (GST_OBJECT_CAST (bin), |
| gst_context_ref (context)); |
| GST_OBJECT_UNLOCK (bin); |
| gst_element_post_message (GST_ELEMENT_CAST (bin), msg); |
| } |
| gst_context_unref (context); |
| } |
| g_list_free_full (elem_contexts, (GDestroyNotify) gst_context_unref); |
| g_list_free (need_context_messages); |
| |
| /* post the messages on the bus of the element so that the bin can handle |
| * them */ |
| if (clock_message) |
| gst_element_post_message (element, clock_message); |
| |
| if (async_message) |
| gst_element_post_message (element, async_message); |
| |
| /* unlink all linked pads */ |
| it = gst_element_iterate_pads (element); |
| while (gst_iterator_foreach (it, (GstIteratorForeachFunction) unlink_pads, |
| NULL) == GST_ITERATOR_RESYNC) |
| gst_iterator_resync (it); |
| gst_iterator_free (it); |
| |
| GST_CAT_DEBUG_OBJECT (GST_CAT_PARENTAGE, bin, "added element \"%s\"", |
| elem_name); |
| |
| g_signal_emit (bin, gst_bin_signals[ELEMENT_ADDED], 0, element); |
| gst_child_proxy_child_added ((GstChildProxy *) bin, (GObject *) element, |
| elem_name); |
| |
| gst_bin_do_deep_add_remove (bin, gst_bin_signals[DEEP_ELEMENT_ADDED], |
| "deep-element-added", element); |
| |
| g_free (elem_name); |
| |
| return TRUE; |
| |
| /* ERROR handling here */ |
| adding_itself: |
| { |
| GST_OBJECT_LOCK (bin); |
| g_warning ("Cannot add bin '%s' to itself", GST_ELEMENT_NAME (bin)); |
| GST_OBJECT_UNLOCK (bin); |
| gst_object_ref_sink (element); |
| gst_object_unref (element); |
| return FALSE; |
| } |
| duplicate_name: |
| { |
| g_warning ("Name '%s' is not unique in bin '%s', not adding", |
| elem_name, GST_ELEMENT_NAME (bin)); |
| GST_OBJECT_UNLOCK (bin); |
| g_free (elem_name); |
| gst_object_ref_sink (element); |
| gst_object_unref (element); |
| return FALSE; |
| } |
| had_parent: |
| { |
| g_warning ("Element '%s' already has parent", elem_name); |
| GST_OBJECT_UNLOCK (bin); |
| g_free (elem_name); |
| return FALSE; |
| } |
| } |
| |
| /** |
| * gst_bin_set_suppressed_flags: |
| * @bin: a #GstBin |
| * @flags: the #GstElementFlags to suppress |
| * |
| * Suppress the given flags on the bin. #GstElementFlags of a |
| * child element are propagated when it is added to the bin. |
| * When suppressed flags are set, those specified flags will |
| * not be propagated to the bin. |
| * |
| * MT safe. |
| * |
| * Since: 1.10 |
| */ |
| void |
| gst_bin_set_suppressed_flags (GstBin * bin, GstElementFlags flags) |
| { |
| g_return_if_fail (GST_IS_BIN (bin)); |
| |
| GST_OBJECT_LOCK (bin); |
| bin->priv->suppressed_flags = bin->priv->suppressed_flags | flags; |
| GST_OBJECT_UNLOCK (bin); |
| |
| GST_DEBUG_OBJECT (bin, "Set suppressed flags(0x%x) to bin '%s'", flags, |
| GST_ELEMENT_NAME (bin)); |
| } |
| |
| /** |
| * gst_bin_get_suppressed_flags: |
| * @bin: a #GstBin |
| * |
| * Return the suppressed flags of the bin. |
| * |
| * MT safe. |
| * |
| * Returns: the bin's suppressed #GstElementFlags. |
| * |
| * Since: 1.10 |
| */ |
| GstElementFlags |
| gst_bin_get_suppressed_flags (GstBin * bin) |
| { |
| GstElementFlags res; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), 0); |
| |
| GST_OBJECT_LOCK (bin); |
| res = bin->priv->suppressed_flags; |
| GST_OBJECT_UNLOCK (bin); |
| |
| return res; |
| } |
| |
| /* signal vfunc, will be called when a new element was added */ |
| static void |
| gst_bin_deep_element_added_func (GstBin * bin, GstBin * sub_bin, |
| GstElement * child) |
| { |
| GstBin *parent_bin; |
| |
| parent_bin = (GstBin *) gst_object_get_parent (GST_OBJECT_CAST (bin)); |
| if (parent_bin == NULL) { |
| GST_LOG_OBJECT (bin, "no parent, reached top-level"); |
| return; |
| } |
| |
| GST_LOG_OBJECT (parent_bin, "emitting deep-element-added for element " |
| "%" GST_PTR_FORMAT " which has just been added to %" GST_PTR_FORMAT, |
| sub_bin, child); |
| |
| g_signal_emit (parent_bin, gst_bin_signals[DEEP_ELEMENT_ADDED], 0, sub_bin, |
| child); |
| |
| gst_object_unref (parent_bin); |
| } |
| |
| /* signal vfunc, will be called when an element was removed */ |
| static void |
| gst_bin_deep_element_removed_func (GstBin * bin, GstBin * sub_bin, |
| GstElement * child) |
| { |
| GstBin *parent_bin; |
| |
| parent_bin = (GstBin *) gst_object_get_parent (GST_OBJECT_CAST (bin)); |
| if (parent_bin == NULL) { |
| GST_LOG_OBJECT (bin, "no parent, reached top-level"); |
| return; |
| } |
| |
| GST_LOG_OBJECT (parent_bin, "emitting deep-element-removed for element " |
| "%" GST_PTR_FORMAT " which has just been removed from %" GST_PTR_FORMAT, |
| sub_bin, child); |
| |
| g_signal_emit (parent_bin, gst_bin_signals[DEEP_ELEMENT_REMOVED], 0, sub_bin, |
| child); |
| |
| gst_object_unref (parent_bin); |
| } |
| |
| /** |
| * gst_bin_add: |
| * @bin: a #GstBin |
| * @element: (transfer floating): the #GstElement to add |
| * |
| * Adds the given element to the bin. Sets the element's parent, and thus |
| * takes ownership of the element. An element can only be added to one bin. |
| * |
| * If the element's pads are linked to other pads, the pads will be unlinked |
| * before the element is added to the bin. |
| * |
| * > When you add an element to an already-running pipeline, you will have to |
| * > take care to set the state of the newly-added element to the desired |
| * > state (usually PLAYING or PAUSED, same you set the pipeline to originally) |
| * > with gst_element_set_state(), or use gst_element_sync_state_with_parent(). |
| * > The bin or pipeline will not take care of this for you. |
| * |
| * MT safe. |
| * |
| * Returns: %TRUE if the element could be added, %FALSE if |
| * the bin does not want to accept the element. |
| */ |
| gboolean |
| gst_bin_add (GstBin * bin, GstElement * element) |
| { |
| GstBinClass *bclass; |
| gboolean result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), FALSE); |
| g_return_val_if_fail (GST_IS_ELEMENT (element), FALSE); |
| g_return_val_if_fail (GST_ELEMENT_CAST (bin) != element, FALSE); |
| |
| bclass = GST_BIN_GET_CLASS (bin); |
| |
| if (G_UNLIKELY (bclass->add_element == NULL)) |
| goto no_function; |
| |
| GST_CAT_DEBUG (GST_CAT_PARENTAGE, "adding element %s to bin %s", |
| GST_STR_NULL (GST_ELEMENT_NAME (element)), |
| GST_STR_NULL (GST_ELEMENT_NAME (bin))); |
| |
| GST_TRACER_BIN_ADD_PRE (bin, element); |
| result = bclass->add_element (bin, element); |
| GST_TRACER_BIN_ADD_POST (bin, element, result); |
| |
| return result; |
| |
| /* ERROR handling */ |
| no_function: |
| { |
| g_warning ("adding elements to bin '%s' is not supported", |
| GST_ELEMENT_NAME (bin)); |
| gst_object_ref_sink (element); |
| gst_object_unref (element); |
| return FALSE; |
| } |
| } |
| |
| /* remove an element from the bin |
| * |
| * MT safe |
| */ |
| static gboolean |
| gst_bin_remove_func (GstBin * bin, GstElement * element) |
| { |
| gchar *elem_name; |
| GstIterator *it; |
| gboolean is_sink, is_source, provides_clock, requires_clock; |
| gboolean othersink, othersource, otherprovider, otherrequirer, found; |
| GstMessage *clock_message = NULL; |
| GstClock **provided_clock_p; |
| GstElement **clock_provider_p; |
| GList *walk, *next; |
| gboolean other_async, this_async, have_no_preroll; |
| GstStateChangeReturn ret; |
| |
| GST_DEBUG_OBJECT (bin, "element :%s", GST_ELEMENT_NAME (element)); |
| |
| /* we obviously can't remove ourself from ourself */ |
| if (G_UNLIKELY (element == GST_ELEMENT_CAST (bin))) |
| goto removing_itself; |
| |
| GST_OBJECT_LOCK (bin); |
| |
| GST_OBJECT_LOCK (element); |
| elem_name = g_strdup (GST_ELEMENT_NAME (element)); |
| |
| if (GST_OBJECT_PARENT (element) != GST_OBJECT_CAST (bin)) |
| goto not_in_bin; |
| |
| /* remove the parent ref */ |
| GST_OBJECT_PARENT (element) = NULL; |
| |
| /* grab element name so we can print it */ |
| is_sink = GST_OBJECT_FLAG_IS_SET (element, GST_ELEMENT_FLAG_SINK); |
| is_source = GST_OBJECT_FLAG_IS_SET (element, GST_ELEMENT_FLAG_SOURCE); |
| provides_clock = |
| GST_OBJECT_FLAG_IS_SET (element, GST_ELEMENT_FLAG_PROVIDE_CLOCK); |
| requires_clock = |
| GST_OBJECT_FLAG_IS_SET (element, GST_ELEMENT_FLAG_REQUIRE_CLOCK); |
| GST_OBJECT_UNLOCK (element); |
| |
| found = FALSE; |
| othersink = FALSE; |
| othersource = FALSE; |
| otherprovider = FALSE; |
| otherrequirer = FALSE; |
| have_no_preroll = FALSE; |
| /* iterate the elements, we collect which ones are async and no_preroll. We |
| * also remove the element when we find it. */ |
| for (walk = bin->children; walk; walk = next) { |
| GstElement *child = GST_ELEMENT_CAST (walk->data); |
| |
| next = g_list_next (walk); |
| |
| if (child == element) { |
| found = TRUE; |
| /* remove the element */ |
| bin->children = g_list_delete_link (bin->children, walk); |
| } else { |
| gboolean child_sink, child_source, child_provider, child_requirer; |
| |
| GST_OBJECT_LOCK (child); |
| child_sink = GST_OBJECT_FLAG_IS_SET (child, GST_ELEMENT_FLAG_SINK); |
| child_source = GST_OBJECT_FLAG_IS_SET (child, GST_ELEMENT_FLAG_SOURCE); |
| child_provider = |
| GST_OBJECT_FLAG_IS_SET (child, GST_ELEMENT_FLAG_PROVIDE_CLOCK); |
| child_requirer = |
| GST_OBJECT_FLAG_IS_SET (child, GST_ELEMENT_FLAG_REQUIRE_CLOCK); |
| /* when we remove a sink, check if there are other sinks. */ |
| if (is_sink && !othersink && child_sink) |
| othersink = TRUE; |
| if (is_source && !othersource && child_source) |
| othersource = TRUE; |
| if (provides_clock && !otherprovider && child_provider) |
| otherprovider = TRUE; |
| if (requires_clock && !otherrequirer && child_requirer) |
| otherrequirer = TRUE; |
| /* check if we have NO_PREROLL children */ |
| if (GST_STATE_RETURN (child) == GST_STATE_CHANGE_NO_PREROLL) |
| have_no_preroll = TRUE; |
| GST_OBJECT_UNLOCK (child); |
| } |
| } |
| |
| /* the element must have been in the bin's list of children */ |
| if (G_UNLIKELY (!found)) |
| goto not_in_bin; |
| |
| /* we now removed the element from the list of elements, increment the cookie |
| * so that others can detect a change in the children list. */ |
| bin->numchildren--; |
| bin->children_cookie++; |
| if (!GST_BIN_IS_NO_RESYNC (bin)) |
| bin->priv->structure_cookie++; |
| |
| if (is_sink && !othersink |
| && !(bin->priv->suppressed_flags & GST_ELEMENT_FLAG_SINK)) { |
| /* we're not a sink anymore */ |
| GST_DEBUG_OBJECT (bin, "we removed the last sink"); |
| GST_OBJECT_FLAG_UNSET (bin, GST_ELEMENT_FLAG_SINK); |
| } |
| if (is_source && !othersource |
| && !(bin->priv->suppressed_flags & GST_ELEMENT_FLAG_SOURCE)) { |
| /* we're not a source anymore */ |
| GST_DEBUG_OBJECT (bin, "we removed the last source"); |
| GST_OBJECT_FLAG_UNSET (bin, GST_ELEMENT_FLAG_SOURCE); |
| } |
| if (provides_clock && !otherprovider |
| && !(bin->priv->suppressed_flags & GST_ELEMENT_FLAG_PROVIDE_CLOCK)) { |
| /* we're not a clock provider anymore */ |
| GST_DEBUG_OBJECT (bin, "we removed the last clock provider"); |
| GST_OBJECT_FLAG_UNSET (bin, GST_ELEMENT_FLAG_PROVIDE_CLOCK); |
| } |
| if (requires_clock && !otherrequirer |
| && !(bin->priv->suppressed_flags & GST_ELEMENT_FLAG_REQUIRE_CLOCK)) { |
| /* we're not a clock requirer anymore */ |
| GST_DEBUG_OBJECT (bin, "we removed the last clock requirer"); |
| GST_OBJECT_FLAG_UNSET (bin, GST_ELEMENT_FLAG_REQUIRE_CLOCK); |
| } |
| |
| /* if the clock provider for this element is removed, we lost |
| * the clock as well, we need to inform the parent of this |
| * so that it can select a new clock */ |
| if (bin->clock_provider == element) { |
| GST_DEBUG_OBJECT (bin, "element \"%s\" provided the clock", elem_name); |
| bin->clock_dirty = TRUE; |
| clock_message = |
| gst_message_new_clock_lost (GST_OBJECT_CAST (bin), bin->provided_clock); |
| provided_clock_p = &bin->provided_clock; |
| clock_provider_p = &bin->clock_provider; |
| gst_object_replace ((GstObject **) provided_clock_p, NULL); |
| gst_object_replace ((GstObject **) clock_provider_p, NULL); |
| } |
| |
| /* remove messages for the element, if there was a pending ASYNC_START |
| * message we must see if removing the element caused the bin to lose its |
| * async state. */ |
| this_async = FALSE; |
| other_async = FALSE; |
| for (walk = bin->messages; walk; walk = next) { |
| GstMessage *message = (GstMessage *) walk->data; |
| GstElement *src = GST_ELEMENT_CAST (GST_MESSAGE_SRC (message)); |
| gboolean remove; |
| |
| next = g_list_next (walk); |
| remove = FALSE; |
| |
| switch (GST_MESSAGE_TYPE (message)) { |
| case GST_MESSAGE_ASYNC_START: |
| if (src == element) |
| this_async = TRUE; |
| else |
| other_async = TRUE; |
| |
| GST_DEBUG_OBJECT (src, "looking at message %p", message); |
| break; |
| case GST_MESSAGE_STRUCTURE_CHANGE: |
| { |
| GstElement *owner; |
| |
| GST_DEBUG_OBJECT (src, "looking at structure change message %p", |
| message); |
| /* it's unlikely that this message is still in the list of messages |
| * because this would mean that a link/unlink is busy in another thread |
| * while we remove the element. We still have to remove the message |
| * because we might not receive the done message anymore when the element |
| * is removed from the bin. */ |
| gst_message_parse_structure_change (message, NULL, &owner, NULL); |
| if (owner == element) |
| remove = TRUE; |
| break; |
| } |
| default: |
| break; |
| } |
| if (src == element) |
| remove = TRUE; |
| |
| if (remove) { |
| /* delete all message types */ |
| GST_DEBUG_OBJECT (src, "deleting message %p of element \"%s\"", |
| message, elem_name); |
| bin->messages = g_list_delete_link (bin->messages, walk); |
| gst_message_unref (message); |
| } |
| } |
| |
| /* get last return */ |
| ret = GST_STATE_RETURN (bin); |
| |
| /* no need to update the state if we are in error */ |
| if (ret == GST_STATE_CHANGE_FAILURE) |
| goto no_state_recalc; |
| |
| if (!other_async && this_async) { |
| /* all other elements were not async and we removed the async one, |
| * handle the async-done case because we are not async anymore now. */ |
| GST_DEBUG_OBJECT (bin, |
| "we removed the last async element, have no_preroll %d", |
| have_no_preroll); |
| |
| /* the current state return of the bin depends on if there are no_preroll |
| * elements in the pipeline or not */ |
| if (have_no_preroll) |
| ret = GST_STATE_CHANGE_NO_PREROLL; |
| else |
| ret = GST_STATE_CHANGE_SUCCESS; |
| |
| bin_handle_async_done (bin, ret, FALSE, GST_CLOCK_TIME_NONE); |
| } else { |
| GST_DEBUG_OBJECT (bin, |
| "recalc state preroll: %d, other async: %d, this async %d", |
| have_no_preroll, other_async, this_async); |
| |
| if (have_no_preroll) { |
| ret = GST_STATE_CHANGE_NO_PREROLL; |
| } else if (other_async) { |
| /* there are other async elements and we were not doing an async state |
| * change, change our pending state and go async */ |
| if (GST_STATE_PENDING (bin) == GST_STATE_VOID_PENDING) { |
| GST_STATE_NEXT (bin) = GST_STATE (bin); |
| GST_STATE_PENDING (bin) = GST_STATE (bin); |
| } |
| ret = GST_STATE_CHANGE_ASYNC; |
| } |
| GST_STATE_RETURN (bin) = ret; |
| } |
| no_state_recalc: |
| /* clear bus */ |
| gst_element_set_bus (element, NULL); |
| /* Clear the clock we provided to the element */ |
| gst_element_set_clock (element, NULL); |
| GST_OBJECT_UNLOCK (bin); |
| |
| if (clock_message) |
| gst_element_post_message (GST_ELEMENT_CAST (bin), clock_message); |
| |
| /* unlink all linked pads */ |
| it = gst_element_iterate_pads (element); |
| while (gst_iterator_foreach (it, (GstIteratorForeachFunction) unlink_pads, |
| NULL) == GST_ITERATOR_RESYNC) |
| gst_iterator_resync (it); |
| gst_iterator_free (it); |
| |
| GST_CAT_INFO_OBJECT (GST_CAT_PARENTAGE, bin, "removed child \"%s\"", |
| elem_name); |
| |
| g_signal_emit (bin, gst_bin_signals[ELEMENT_REMOVED], 0, element); |
| gst_child_proxy_child_removed ((GstChildProxy *) bin, (GObject *) element, |
| elem_name); |
| |
| gst_bin_do_deep_add_remove (bin, gst_bin_signals[DEEP_ELEMENT_REMOVED], |
| "deep-element-removed", element); |
| |
| g_free (elem_name); |
| /* element is really out of our control now */ |
| gst_object_unref (element); |
| |
| return TRUE; |
| |
| /* ERROR handling */ |
| removing_itself: |
| { |
| GST_OBJECT_LOCK (bin); |
| g_warning ("Cannot remove bin '%s' from itself", GST_ELEMENT_NAME (bin)); |
| GST_OBJECT_UNLOCK (bin); |
| return FALSE; |
| } |
| not_in_bin: |
| { |
| g_warning ("Element '%s' is not in bin '%s'", elem_name, |
| GST_ELEMENT_NAME (bin)); |
| GST_OBJECT_UNLOCK (element); |
| GST_OBJECT_UNLOCK (bin); |
| g_free (elem_name); |
| return FALSE; |
| } |
| } |
| |
| /** |
| * gst_bin_remove: |
| * @bin: a #GstBin |
| * @element: (transfer none): the #GstElement to remove |
| * |
| * Removes the element from the bin, unparenting it as well. |
| * Unparenting the element means that the element will be dereferenced, |
| * so if the bin holds the only reference to the element, the element |
| * will be freed in the process of removing it from the bin. If you |
| * want the element to still exist after removing, you need to call |
| * gst_object_ref() before removing it from the bin. |
| * |
| * If the element's pads are linked to other pads, the pads will be unlinked |
| * before the element is removed from the bin. |
| * |
| * MT safe. |
| * |
| * Returns: %TRUE if the element could be removed, %FALSE if |
| * the bin does not want to remove the element. |
| */ |
| gboolean |
| gst_bin_remove (GstBin * bin, GstElement * element) |
| { |
| GstBinClass *bclass; |
| gboolean result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), FALSE); |
| g_return_val_if_fail (GST_IS_ELEMENT (element), FALSE); |
| g_return_val_if_fail (GST_ELEMENT_CAST (bin) != element, FALSE); |
| |
| bclass = GST_BIN_GET_CLASS (bin); |
| |
| if (G_UNLIKELY (bclass->remove_element == NULL)) |
| goto no_function; |
| |
| GST_CAT_DEBUG (GST_CAT_PARENTAGE, "removing element %s from bin %s", |
| GST_ELEMENT_NAME (element), GST_ELEMENT_NAME (bin)); |
| |
| GST_TRACER_BIN_REMOVE_PRE (bin, element); |
| result = bclass->remove_element (bin, element); |
| GST_TRACER_BIN_REMOVE_POST (bin, result); |
| |
| return result; |
| |
| /* ERROR handling */ |
| no_function: |
| { |
| g_warning ("removing elements from bin '%s' is not supported", |
| GST_ELEMENT_NAME (bin)); |
| return FALSE; |
| } |
| } |
| |
| /** |
| * gst_bin_iterate_elements: |
| * @bin: a #GstBin |
| * |
| * Gets an iterator for the elements in this bin. |
| * |
| * MT safe. Caller owns returned value. |
| * |
| * Returns: (transfer full) (nullable): a #GstIterator of #GstElement, |
| * or %NULL |
| */ |
| GstIterator * |
| gst_bin_iterate_elements (GstBin * bin) |
| { |
| GstIterator *result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| |
| GST_OBJECT_LOCK (bin); |
| result = gst_iterator_new_list (GST_TYPE_ELEMENT, |
| GST_OBJECT_GET_LOCK (bin), |
| &bin->children_cookie, &bin->children, (GObject *) bin, NULL); |
| GST_OBJECT_UNLOCK (bin); |
| |
| return result; |
| } |
| |
| static GstIteratorItem |
| iterate_child_recurse (GstIterator * it, const GValue * item) |
| { |
| GstElement *child = g_value_get_object (item); |
| |
| if (GST_IS_BIN (child)) { |
| GstIterator *other = gst_bin_iterate_recurse (GST_BIN_CAST (child)); |
| |
| gst_iterator_push (it, other); |
| } |
| return GST_ITERATOR_ITEM_PASS; |
| } |
| |
| /** |
| * gst_bin_iterate_recurse: |
| * @bin: a #GstBin |
| * |
| * Gets an iterator for the elements in this bin. |
| * This iterator recurses into GstBin children. |
| * |
| * MT safe. Caller owns returned value. |
| * |
| * Returns: (transfer full) (nullable): a #GstIterator of #GstElement, |
| * or %NULL |
| */ |
| GstIterator * |
| gst_bin_iterate_recurse (GstBin * bin) |
| { |
| GstIterator *result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| |
| GST_OBJECT_LOCK (bin); |
| result = gst_iterator_new_list (GST_TYPE_ELEMENT, |
| GST_OBJECT_GET_LOCK (bin), |
| &bin->children_cookie, |
| &bin->children, |
| (GObject *) bin, (GstIteratorItemFunction) iterate_child_recurse); |
| GST_OBJECT_UNLOCK (bin); |
| |
| return result; |
| } |
| |
| /* returns 0 when TRUE because this is a GCompareFunc */ |
| /* MT safe */ |
| static gint |
| bin_element_is_sink (GstElement * child, GstBin * bin) |
| { |
| gboolean is_sink; |
| |
| /* we lock the child here for the remainder of the function to |
| * get its name and flag safely. */ |
| GST_OBJECT_LOCK (child); |
| is_sink = GST_OBJECT_FLAG_IS_SET (child, GST_ELEMENT_FLAG_SINK); |
| |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, bin, |
| "child %s %s sink", GST_OBJECT_NAME (child), is_sink ? "is" : "is not"); |
| |
| GST_OBJECT_UNLOCK (child); |
| return is_sink ? 0 : 1; |
| } |
| |
| static gint |
| sink_iterator_filter (const GValue * vchild, GValue * vbin) |
| { |
| GstBin *bin = g_value_get_object (vbin); |
| GstElement *child = g_value_get_object (vchild); |
| |
| return (bin_element_is_sink (child, bin)); |
| } |
| |
| /** |
| * gst_bin_iterate_sinks: |
| * @bin: a #GstBin |
| * |
| * Gets an iterator for all elements in the bin that have the |
| * #GST_ELEMENT_FLAG_SINK flag set. |
| * |
| * MT safe. Caller owns returned value. |
| * |
| * Returns: (transfer full) (nullable): a #GstIterator of #GstElement, |
| * or %NULL |
| */ |
| GstIterator * |
| gst_bin_iterate_sinks (GstBin * bin) |
| { |
| GstIterator *children; |
| GstIterator *result; |
| GValue vbin = { 0, }; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| |
| g_value_init (&vbin, GST_TYPE_BIN); |
| g_value_set_object (&vbin, bin); |
| |
| children = gst_bin_iterate_elements (bin); |
| result = gst_iterator_filter (children, |
| (GCompareFunc) sink_iterator_filter, &vbin); |
| |
| g_value_unset (&vbin); |
| |
| return result; |
| } |
| |
| /* returns 0 when TRUE because this is a GCompareFunc */ |
| /* MT safe */ |
| static gint |
| bin_element_is_src (GstElement * child, GstBin * bin) |
| { |
| gboolean is_src; |
| |
| /* we lock the child here for the remainder of the function to |
| * get its name and other info safely. */ |
| GST_OBJECT_LOCK (child); |
| is_src = GST_OBJECT_FLAG_IS_SET (child, GST_ELEMENT_FLAG_SOURCE); |
| |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, bin, |
| "child %s %s src", GST_OBJECT_NAME (child), is_src ? "is" : "is not"); |
| |
| GST_OBJECT_UNLOCK (child); |
| return is_src ? 0 : 1; |
| } |
| |
| static gint |
| src_iterator_filter (const GValue * vchild, GValue * vbin) |
| { |
| GstBin *bin = g_value_get_object (vbin); |
| GstElement *child = g_value_get_object (vchild); |
| |
| return (bin_element_is_src (child, bin)); |
| } |
| |
| /** |
| * gst_bin_iterate_sources: |
| * @bin: a #GstBin |
| * |
| * Gets an iterator for all elements in the bin that have the |
| * #GST_ELEMENT_FLAG_SOURCE flag set. |
| * |
| * MT safe. Caller owns returned value. |
| * |
| * Returns: (transfer full) (nullable): a #GstIterator of #GstElement, |
| * or %NULL |
| */ |
| GstIterator * |
| gst_bin_iterate_sources (GstBin * bin) |
| { |
| GstIterator *children; |
| GstIterator *result; |
| GValue vbin = { 0, }; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| |
| g_value_init (&vbin, GST_TYPE_BIN); |
| g_value_set_object (&vbin, bin); |
| |
| children = gst_bin_iterate_elements (bin); |
| result = gst_iterator_filter (children, |
| (GCompareFunc) src_iterator_filter, &vbin); |
| |
| g_value_unset (&vbin); |
| |
| return result; |
| } |
| |
| /* |
| * MT safe |
| */ |
| static GstStateChangeReturn |
| gst_bin_get_state_func (GstElement * element, GstState * state, |
| GstState * pending, GstClockTime timeout) |
| { |
| GstStateChangeReturn ret; |
| |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, element, "getting state"); |
| |
| ret = |
| GST_ELEMENT_CLASS (parent_class)->get_state (element, state, pending, |
| timeout); |
| |
| return ret; |
| } |
| |
| /*********************************************** |
| * Topologically sorted iterator |
| * see http://en.wikipedia.org/wiki/Topological_sorting |
| * |
| * For each element in the graph, an entry is kept in a HashTable |
| * with its number of srcpad connections (degree). |
| * We then change state of all elements without dependencies |
| * (degree 0) and decrement the degree of all elements connected |
| * on the sinkpads. When an element reaches degree 0, its state is |
| * changed next. |
| * When all elements are handled the algorithm stops. |
| */ |
| typedef struct _GstBinSortIterator |
| { |
| GstIterator it; |
| GQueue queue; /* elements queued for state change */ |
| GstBin *bin; /* bin we iterate */ |
| gint mode; /* adding or removing dependency */ |
| GstElement *best; /* next element with least dependencies */ |
| gint best_deg; /* best degree */ |
| GHashTable *hash; /* hashtable with element dependencies */ |
| gboolean dirty; /* we detected structure change */ |
| } GstBinSortIterator; |
| |
| static void |
| copy_to_queue (gpointer data, gpointer user_data) |
| { |
| GstElement *element = data; |
| GQueue *queue = user_data; |
| |
| gst_object_ref (element); |
| g_queue_push_tail (queue, element); |
| } |
| |
| static void |
| gst_bin_sort_iterator_copy (const GstBinSortIterator * it, |
| GstBinSortIterator * copy) |
| { |
| GHashTableIter iter; |
| gpointer key, value; |
| |
| g_queue_init (©->queue); |
| g_queue_foreach ((GQueue *) & it->queue, copy_to_queue, ©->queue); |
| |
| copy->bin = gst_object_ref (it->bin); |
| if (it->best) |
| copy->best = gst_object_ref (it->best); |
| |
| copy->hash = g_hash_table_new (NULL, NULL); |
| g_hash_table_iter_init (&iter, it->hash); |
| while (g_hash_table_iter_next (&iter, &key, &value)) |
| g_hash_table_insert (copy->hash, key, value); |
| } |
| |
| /* we add and subtract 1 to make sure we don't confuse NULL and 0 */ |
| #define HASH_SET_DEGREE(bit, elem, deg) \ |
| g_hash_table_replace (bit->hash, elem, GINT_TO_POINTER(deg+1)) |
| #define HASH_GET_DEGREE(bit, elem) \ |
| (GPOINTER_TO_INT(g_hash_table_lookup (bit->hash, elem))-1) |
| |
| /* add element to queue of next elements in the iterator. |
| * We push at the tail to give higher priority elements a |
| * chance first */ |
| static void |
| add_to_queue (GstBinSortIterator * bit, GstElement * element) |
| { |
| GST_DEBUG_OBJECT (bit->bin, "adding '%s' to queue", |
| GST_ELEMENT_NAME (element)); |
| gst_object_ref (element); |
| g_queue_push_tail (&bit->queue, element); |
| HASH_SET_DEGREE (bit, element, -1); |
| } |
| |
| static void |
| remove_from_queue (GstBinSortIterator * bit, GstElement * element) |
| { |
| GList *find; |
| |
| if ((find = g_queue_find (&bit->queue, element))) { |
| GST_DEBUG_OBJECT (bit->bin, "removing '%s' from queue", |
| GST_ELEMENT_NAME (element)); |
| |
| g_queue_delete_link (&bit->queue, find); |
| gst_object_unref (element); |
| } else { |
| GST_DEBUG_OBJECT (bit->bin, "unable to remove '%s' from queue", |
| GST_ELEMENT_NAME (element)); |
| } |
| } |
| |
| /* clear the queue, unref all objects as we took a ref when |
| * we added them to the queue */ |
| static void |
| clear_queue (GQueue * queue) |
| { |
| gpointer p; |
| |
| while ((p = g_queue_pop_head (queue))) |
| gst_object_unref (p); |
| } |
| |
| /* set all degrees to 0. Elements marked as a sink are |
| * added to the queue immediately. Since we only look at the SINK flag of the |
| * element, it is possible that we add non-sinks to the queue. These will be |
| * removed from the queue again when we can prove that it provides data for some |
| * other element. */ |
| static void |
| reset_degree (GstElement * element, GstBinSortIterator * bit) |
| { |
| gboolean is_sink; |
| |
| /* sinks are added right away */ |
| GST_OBJECT_LOCK (element); |
| is_sink = GST_OBJECT_FLAG_IS_SET (element, GST_ELEMENT_FLAG_SINK); |
| GST_OBJECT_UNLOCK (element); |
| |
| if (is_sink) { |
| add_to_queue (bit, element); |
| } else { |
| /* others are marked with 0 and handled when sinks are done */ |
| HASH_SET_DEGREE (bit, element, 0); |
| } |
| } |
| |
| /* adjust the degree of all elements connected to the given |
| * element. If a degree of an element drops to 0, it is |
| * added to the queue of elements to schedule next. |
| * |
| * We have to make sure not to cross the bin boundary this element |
| * belongs to. |
| */ |
| static void |
| update_degree (GstElement * element, GstBinSortIterator * bit) |
| { |
| gboolean linked = FALSE; |
| |
| GST_OBJECT_LOCK (element); |
| /* don't touch degree if element has no sinkpads */ |
| if (element->numsinkpads != 0) { |
| /* loop over all sinkpads, decrement degree for all connected |
| * elements in this bin */ |
| GList *pads; |
| |
| for (pads = element->sinkpads; pads; pads = g_list_next (pads)) { |
| GstPad *pad, *peer; |
| |
| pad = GST_PAD_CAST (pads->data); |
| |
| /* we're iterating over the sinkpads, check if it's busy in a link/unlink */ |
| if (G_UNLIKELY (find_message (bit->bin, GST_OBJECT_CAST (pad), |
| GST_MESSAGE_STRUCTURE_CHANGE))) { |
| /* mark the iterator as dirty because we won't be updating the degree |
| * of the peer parent now. This would result in the 'loop detected' |
| * later on because the peer parent element could become the best next |
| * element with a degree > 0. We will simply continue our state |
| * changes and we'll eventually resync when the unlink completed and |
| * the iterator cookie is updated. */ |
| bit->dirty = TRUE; |
| continue; |
| } |
| |
| if ((peer = gst_pad_get_peer (pad))) { |
| GstElement *peer_element; |
| |
| if ((peer_element = gst_pad_get_parent_element (peer))) { |
| GST_OBJECT_LOCK (peer_element); |
| /* check that we don't go outside of this bin */ |
| if (GST_OBJECT_CAST (peer_element)->parent == |
| GST_OBJECT_CAST (bit->bin)) { |
| gint old_deg, new_deg; |
| |
| old_deg = HASH_GET_DEGREE (bit, peer_element); |
| |
| /* check to see if we added an element as sink that was not really a |
| * sink because it was connected to some other element. */ |
| if (old_deg == -1) { |
| remove_from_queue (bit, peer_element); |
| old_deg = 0; |
| } |
| new_deg = old_deg + bit->mode; |
| |
| GST_DEBUG_OBJECT (bit->bin, |
| "change element %s, degree %d->%d, linked to %s", |
| GST_ELEMENT_NAME (peer_element), old_deg, new_deg, |
| GST_ELEMENT_NAME (element)); |
| |
| /* update degree, it is possible that an element was in 0 and |
| * reaches -1 here. This would mean that the element had no sinkpads |
| * but became linked while the state change was happening. We will |
| * resync on this with the structure change message. */ |
| if (new_deg == 0) { |
| /* degree hit 0, add to queue */ |
| add_to_queue (bit, peer_element); |
| } else { |
| HASH_SET_DEGREE (bit, peer_element, new_deg); |
| } |
| linked = TRUE; |
| } |
| GST_OBJECT_UNLOCK (peer_element); |
| gst_object_unref (peer_element); |
| } |
| gst_object_unref (peer); |
| } |
| } |
| } |
| if (!linked) { |
| GST_DEBUG_OBJECT (bit->bin, "element %s not linked on any sinkpads", |
| GST_ELEMENT_NAME (element)); |
| } |
| GST_OBJECT_UNLOCK (element); |
| } |
| |
| /* find the next best element not handled yet. This is the one |
| * with the lowest non-negative degree */ |
| static void |
| find_element (GstElement * element, GstBinSortIterator * bit) |
| { |
| gint degree; |
| |
| /* element is already handled */ |
| if ((degree = HASH_GET_DEGREE (bit, element)) < 0) |
| return; |
| |
| /* first element or element with smaller degree */ |
| if (bit->best == NULL || bit->best_deg > degree) { |
| bit->best = element; |
| bit->best_deg = degree; |
| } else if (bit->best_deg == degree |
| && GST_OBJECT_FLAG_IS_SET (bit->best, GST_ELEMENT_FLAG_SOURCE) |
| && !GST_OBJECT_FLAG_IS_SET (element, GST_ELEMENT_FLAG_SOURCE)) { |
| /* If two elements have the same degree, we want to ensure we |
| * return non-source elements first. */ |
| bit->best = element; |
| } |
| } |
| |
| /* get next element in iterator. */ |
| static GstIteratorResult |
| gst_bin_sort_iterator_next (GstBinSortIterator * bit, GValue * result) |
| { |
| GstElement *best; |
| GstBin *bin = bit->bin; |
| |
| /* empty queue, we have to find a next best element */ |
| if (g_queue_is_empty (&bit->queue)) { |
| bit->best = NULL; |
| bit->best_deg = G_MAXINT; |
| g_list_foreach (bin->children, (GFunc) find_element, bit); |
| if ((best = bit->best)) { |
| /* when we detected an unlink, don't warn because our degrees might be |
| * screwed up. We will resync later */ |
| if (bit->best_deg != 0 && !bit->dirty) { |
| /* we don't fail on this one yet */ |
| GST_WARNING_OBJECT (bin, "loop dected in graph"); |
| g_warning ("loop detected in the graph of bin '%s'!!", |
| GST_ELEMENT_NAME (bin)); |
| } |
| /* best unhandled element, schedule as next element */ |
| GST_DEBUG_OBJECT (bin, "queue empty, next best: %s", |
| GST_ELEMENT_NAME (best)); |
| HASH_SET_DEGREE (bit, best, -1); |
| g_value_set_object (result, best); |
| } else { |
| GST_DEBUG_OBJECT (bin, "queue empty, elements exhausted"); |
| /* no more unhandled elements, we are done */ |
| return GST_ITERATOR_DONE; |
| } |
| } else { |
| /* everything added to the queue got reffed */ |
| best = g_queue_pop_head (&bit->queue); |
| g_value_set_object (result, best); |
| gst_object_unref (best); |
| } |
| |
| GST_DEBUG_OBJECT (bin, "queue head gives %s", GST_ELEMENT_NAME (best)); |
| /* update degrees of linked elements */ |
| update_degree (best, bit); |
| |
| return GST_ITERATOR_OK; |
| } |
| |
| /* clear queues, recalculate the degrees and restart. */ |
| static void |
| gst_bin_sort_iterator_resync (GstBinSortIterator * bit) |
| { |
| GstBin *bin = bit->bin; |
| |
| GST_DEBUG_OBJECT (bin, "resync"); |
| bit->dirty = FALSE; |
| clear_queue (&bit->queue); |
| /* reset degrees */ |
| g_list_foreach (bin->children, (GFunc) reset_degree, bit); |
| /* calc degrees, incrementing */ |
| bit->mode = 1; |
| g_list_foreach (bin->children, (GFunc) update_degree, bit); |
| /* for the rest of the function we decrement the degrees */ |
| bit->mode = -1; |
| } |
| |
| /* clear queues, unref bin and free iterator. */ |
| static void |
| gst_bin_sort_iterator_free (GstBinSortIterator * bit) |
| { |
| GstBin *bin = bit->bin; |
| |
| GST_DEBUG_OBJECT (bin, "free"); |
| clear_queue (&bit->queue); |
| g_hash_table_destroy (bit->hash); |
| gst_object_unref (bin); |
| } |
| |
| /* should be called with the bin LOCK held */ |
| static GstIterator * |
| gst_bin_sort_iterator_new (GstBin * bin) |
| { |
| GstBinSortIterator *result; |
| |
| /* we don't need an ItemFunction because we ref the items in the _next |
| * method already */ |
| result = (GstBinSortIterator *) |
| gst_iterator_new (sizeof (GstBinSortIterator), |
| GST_TYPE_ELEMENT, |
| GST_OBJECT_GET_LOCK (bin), |
| &bin->priv->structure_cookie, |
| (GstIteratorCopyFunction) gst_bin_sort_iterator_copy, |
| (GstIteratorNextFunction) gst_bin_sort_iterator_next, |
| (GstIteratorItemFunction) NULL, |
| (GstIteratorResyncFunction) gst_bin_sort_iterator_resync, |
| (GstIteratorFreeFunction) gst_bin_sort_iterator_free); |
| g_queue_init (&result->queue); |
| result->hash = g_hash_table_new (NULL, NULL); |
| gst_object_ref (bin); |
| result->bin = bin; |
| gst_bin_sort_iterator_resync (result); |
| |
| return (GstIterator *) result; |
| } |
| |
| /** |
| * gst_bin_iterate_sorted: |
| * @bin: a #GstBin |
| * |
| * Gets an iterator for the elements in this bin in topologically |
| * sorted order. This means that the elements are returned from |
| * the most downstream elements (sinks) to the sources. |
| * |
| * This function is used internally to perform the state changes |
| * of the bin elements and for clock selection. |
| * |
| * MT safe. Caller owns returned value. |
| * |
| * Returns: (transfer full) (nullable): a #GstIterator of #GstElement, |
| * or %NULL |
| */ |
| GstIterator * |
| gst_bin_iterate_sorted (GstBin * bin) |
| { |
| GstIterator *result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| |
| GST_OBJECT_LOCK (bin); |
| result = gst_bin_sort_iterator_new (bin); |
| GST_OBJECT_UNLOCK (bin); |
| |
| return result; |
| } |
| |
| static GstStateChangeReturn |
| gst_bin_element_set_state (GstBin * bin, GstElement * element, |
| GstClockTime base_time, GstClockTime start_time, GstState current, |
| GstState next) |
| { |
| GstStateChangeReturn ret; |
| GstState child_current, child_pending; |
| gboolean locked; |
| GList *found; |
| |
| GST_STATE_LOCK (element); |
| |
| GST_OBJECT_LOCK (element); |
| /* set base_time and start time on child */ |
| GST_ELEMENT_START_TIME (element) = start_time; |
| element->base_time = base_time; |
| /* peel off the locked flag */ |
| locked = GST_ELEMENT_IS_LOCKED_STATE (element); |
| /* Get the previous set_state result to preserve NO_PREROLL and ASYNC */ |
| ret = GST_STATE_RETURN (element); |
| child_current = GST_STATE (element); |
| child_pending = GST_STATE_PENDING (element); |
| GST_OBJECT_UNLOCK (element); |
| |
| /* skip locked elements */ |
| if (G_UNLIKELY (locked)) |
| goto locked; |
| |
| /* if the element was no preroll, just start changing the state regardless |
| * if it had async elements (in the case of a bin) because they won't preroll |
| * anyway. */ |
| if (G_UNLIKELY (ret == GST_STATE_CHANGE_NO_PREROLL)) { |
| GST_DEBUG_OBJECT (element, "element is NO_PREROLL, ignore async elements"); |
| goto no_preroll; |
| } |
| |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, element, |
| "current %s pending %s, desired next %s", |
| gst_element_state_get_name (child_current), |
| gst_element_state_get_name (child_pending), |
| gst_element_state_get_name (next)); |
| |
| /* always recurse into bins so that we can set the base time */ |
| if (GST_IS_BIN (element)) |
| goto do_state; |
| |
| /* Try not to change the state of elements that are already in the state we're |
| * going to */ |
| if (child_current == next && child_pending == GST_STATE_VOID_PENDING) { |
| /* child is already at the requested state, return previous return. Note that |
| * if the child has a pending state to next, we will still call the |
| * set_state function */ |
| goto unneeded; |
| } else if (next > current) { |
| /* upward state change */ |
| if (child_pending == GST_STATE_VOID_PENDING) { |
| /* .. and the child is not busy doing anything */ |
| if (child_current > next) { |
| /* .. and is already past the requested state, assume it got there |
| * without error */ |
| ret = GST_STATE_CHANGE_SUCCESS; |
| goto unneeded; |
| } |
| } else if (child_pending > child_current) { |
| /* .. and the child is busy going upwards */ |
| if (child_current >= next) { |
| /* .. and is already past the requested state, assume it got there |
| * without error */ |
| ret = GST_STATE_CHANGE_SUCCESS; |
| goto unneeded; |
| } |
| } else { |
| /* .. and the child is busy going downwards */ |
| if (child_current > next) { |
| /* .. and is already past the requested state, assume it got there |
| * without error */ |
| ret = GST_STATE_CHANGE_SUCCESS; |
| goto unneeded; |
| } |
| } |
| } else if (next < current) { |
| /* downward state change */ |
| if (child_pending == GST_STATE_VOID_PENDING) { |
| /* .. and the child is not busy doing anything */ |
| if (child_current < next) { |
| /* .. and is already past the requested state, assume it got there |
| * without error */ |
| ret = GST_STATE_CHANGE_SUCCESS; |
| goto unneeded; |
| } |
| } else if (child_pending < child_current) { |
| /* .. and the child is busy going downwards */ |
| if (child_current <= next) { |
| /* .. and is already past the requested state, assume it got there |
| * without error */ |
| ret = GST_STATE_CHANGE_SUCCESS; |
| goto unneeded; |
| } |
| } else { |
| /* .. and the child is busy going upwards */ |
| if (child_current < next) { |
| /* .. and is already past the requested state, assume it got there |
| * without error */ |
| ret = GST_STATE_CHANGE_SUCCESS; |
| goto unneeded; |
| } |
| } |
| } |
| |
| do_state: |
| GST_OBJECT_LOCK (bin); |
| /* the element was busy with an upwards async state change, we must wait for |
| * an ASYNC_DONE message before we attemp to change the state. */ |
| if ((found = |
| find_message (bin, GST_OBJECT_CAST (element), |
| GST_MESSAGE_ASYNC_START))) { |
| #ifndef GST_DISABLE_GST_DEBUG |
| GstMessage *message = GST_MESSAGE_CAST (found->data); |
| |
| GST_DEBUG_OBJECT (element, "element message %p, %s async busy", |
| message, GST_ELEMENT_NAME (GST_MESSAGE_SRC (message))); |
| #endif |
| /* only wait for upward state changes */ |
| if (next > current) { |
| /* We found an async element check if we can force its state to change or |
| * if we have to wait for it to preroll. */ |
| goto was_busy; |
| } |
| } |
| GST_OBJECT_UNLOCK (bin); |
| |
| no_preroll: |
| GST_DEBUG_OBJECT (bin, |
| "setting element %s to %s, base_time %" GST_TIME_FORMAT, |
| GST_ELEMENT_NAME (element), gst_element_state_get_name (next), |
| GST_TIME_ARGS (base_time)); |
| |
| /* change state */ |
| ret = gst_element_set_state (element, next); |
| |
| GST_STATE_UNLOCK (element); |
| |
| return ret; |
| |
| locked: |
| { |
| GST_DEBUG_OBJECT (element, |
| "element is locked, return previous return %s", |
| gst_element_state_change_return_get_name (ret)); |
| GST_STATE_UNLOCK (element); |
| return ret; |
| } |
| unneeded: |
| { |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, element, |
| "skipping transition from %s to %s", |
| gst_element_state_get_name (child_current), |
| gst_element_state_get_name (next)); |
| GST_STATE_UNLOCK (element); |
| return ret; |
| } |
| was_busy: |
| { |
| GST_DEBUG_OBJECT (element, "element was busy, delaying state change"); |
| GST_OBJECT_UNLOCK (bin); |
| GST_STATE_UNLOCK (element); |
| return GST_STATE_CHANGE_ASYNC; |
| } |
| } |
| |
| /* gst_iterator_fold functions for pads_activate |
| * Stop the iterator if activating one pad failed, but only if that pad |
| * has not been removed from the element. */ |
| static gboolean |
| activate_pads (const GValue * vpad, GValue * ret, gboolean * active) |
| { |
| GstPad *pad = g_value_get_object (vpad); |
| gboolean cont = TRUE; |
| |
| if (!gst_pad_set_active (pad, *active)) { |
| if (GST_PAD_PARENT (pad) != NULL) { |
| cont = FALSE; |
| g_value_set_boolean (ret, FALSE); |
| } |
| } |
| |
| return cont; |
| } |
| |
| /* returns false on error or early cutout of the fold, true if all |
| * pads in @iter were (de)activated successfully. */ |
| static gboolean |
| iterator_activate_fold_with_resync (GstIterator * iter, gpointer user_data) |
| { |
| GstIteratorResult ires; |
| GValue ret = { 0 }; |
| |
| /* no need to unset this later, it's just a boolean */ |
| g_value_init (&ret, G_TYPE_BOOLEAN); |
| g_value_set_boolean (&ret, TRUE); |
| |
| while (1) { |
| ires = gst_iterator_fold (iter, (GstIteratorFoldFunction) activate_pads, |
| &ret, user_data); |
| switch (ires) { |
| case GST_ITERATOR_RESYNC: |
| /* need to reset the result again */ |
| g_value_set_boolean (&ret, TRUE); |
| gst_iterator_resync (iter); |
| break; |
| case GST_ITERATOR_DONE: |
| /* all pads iterated, return collected value */ |
| goto done; |
| default: |
| /* iterator returned _ERROR or premature end with _OK, |
| * mark an error and exit */ |
| g_value_set_boolean (&ret, FALSE); |
| goto done; |
| } |
| } |
| done: |
| /* return collected value */ |
| return g_value_get_boolean (&ret); |
| } |
| |
| /* is called with STATE_LOCK |
| */ |
| static gboolean |
| gst_bin_src_pads_activate (GstBin * bin, gboolean active) |
| { |
| GstIterator *iter; |
| gboolean fold_ok; |
| |
| GST_DEBUG_OBJECT (bin, "%s pads", active ? "activate" : "deactivate"); |
| |
| iter = gst_element_iterate_src_pads ((GstElement *) bin); |
| fold_ok = iterator_activate_fold_with_resync (iter, &active); |
| gst_iterator_free (iter); |
| if (G_UNLIKELY (!fold_ok)) |
| goto failed; |
| |
| GST_DEBUG_OBJECT (bin, "pad %sactivation successful", active ? "" : "de"); |
| |
| return TRUE; |
| |
| /* ERRORS */ |
| failed: |
| { |
| GST_DEBUG_OBJECT (bin, "pad %sactivation failed", active ? "" : "de"); |
| return FALSE; |
| } |
| } |
| |
| /** |
| * gst_bin_recalculate_latency: |
| * @bin: a #GstBin |
| * |
| * Query @bin for the current latency using and reconfigures this latency to all the |
| * elements with a LATENCY event. |
| * |
| * This method is typically called on the pipeline when a #GST_MESSAGE_LATENCY |
| * is posted on the bus. |
| * |
| * This function simply emits the 'do-latency' signal so any custom latency |
| * calculations will be performed. |
| * |
| * Returns: %TRUE if the latency could be queried and reconfigured. |
| */ |
| gboolean |
| gst_bin_recalculate_latency (GstBin * bin) |
| { |
| gboolean res; |
| |
| g_signal_emit (bin, gst_bin_signals[DO_LATENCY], 0, &res); |
| GST_DEBUG_OBJECT (bin, "latency returned %d", res); |
| |
| return res; |
| } |
| |
| static gboolean |
| gst_bin_do_latency_func (GstBin * bin) |
| { |
| GstQuery *query; |
| GstElement *element; |
| GstClockTime min_latency, max_latency; |
| gboolean res; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), FALSE); |
| |
| element = GST_ELEMENT_CAST (bin); |
| |
| GST_DEBUG_OBJECT (element, "querying latency"); |
| |
| query = gst_query_new_latency (); |
| if ((res = gst_element_query (element, query))) { |
| gboolean live; |
| |
| gst_query_parse_latency (query, &live, &min_latency, &max_latency); |
| |
| GST_DEBUG_OBJECT (element, |
| "got min latency %" GST_TIME_FORMAT ", max latency %" |
| GST_TIME_FORMAT ", live %d", GST_TIME_ARGS (min_latency), |
| GST_TIME_ARGS (max_latency), live); |
| |
| if (max_latency < min_latency) { |
| /* this is an impossible situation, some parts of the pipeline might not |
| * work correctly. We post a warning for now. */ |
| GST_ELEMENT_WARNING (element, CORE, CLOCK, (NULL), |
| ("Impossible to configure latency: max %" GST_TIME_FORMAT " < min %" |
| GST_TIME_FORMAT ". Add queues or other buffering elements.", |
| GST_TIME_ARGS (max_latency), GST_TIME_ARGS (min_latency))); |
| } |
| |
| /* configure latency on elements */ |
| res = gst_element_send_event (element, gst_event_new_latency (min_latency)); |
| if (res) { |
| GST_INFO_OBJECT (element, "configured latency of %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (min_latency)); |
| } else { |
| GST_WARNING_OBJECT (element, |
| "did not really configure latency of %" GST_TIME_FORMAT, |
| GST_TIME_ARGS (min_latency)); |
| } |
| } else { |
| /* this is not a real problem, we just don't configure any latency. */ |
| GST_WARNING_OBJECT (element, "failed to query latency"); |
| } |
| gst_query_unref (query); |
| |
| return res; |
| } |
| |
| static gboolean |
| gst_bin_post_message (GstElement * element, GstMessage * msg) |
| { |
| GstElementClass *pklass = (GstElementClass *) parent_class; |
| gboolean ret; |
| |
| ret = pklass->post_message (element, gst_message_ref (msg)); |
| |
| if (GST_MESSAGE_TYPE (msg) == GST_MESSAGE_STATE_CHANGED && |
| GST_MESSAGE_SRC (msg) == GST_OBJECT_CAST (element)) { |
| GstState newstate, pending; |
| |
| gst_message_parse_state_changed (msg, NULL, &newstate, &pending); |
| if (newstate == GST_STATE_PLAYING && pending == GST_STATE_VOID_PENDING) { |
| GST_BIN_CAST (element)->priv->posted_playing = TRUE; |
| bin_do_eos (GST_BIN_CAST (element)); |
| } else { |
| GST_BIN_CAST (element)->priv->posted_playing = FALSE; |
| } |
| } |
| |
| gst_message_unref (msg); |
| |
| return ret; |
| } |
| |
| static void |
| reset_state (const GValue * data, gpointer user_data) |
| { |
| GstElement *e = g_value_get_object (data); |
| GstState state = GPOINTER_TO_INT (user_data); |
| |
| if (gst_element_set_state (e, state) == GST_STATE_CHANGE_FAILURE) |
| GST_WARNING_OBJECT (e, "Failed to switch back down to %s", |
| gst_element_state_get_name (state)); |
| } |
| |
| static GstStateChangeReturn |
| gst_bin_change_state_func (GstElement * element, GstStateChange transition) |
| { |
| GstBin *bin; |
| GstStateChangeReturn ret; |
| GstState current, next; |
| gboolean have_async; |
| gboolean have_no_preroll; |
| GstClockTime base_time, start_time; |
| GstIterator *it; |
| gboolean done; |
| GValue data = { 0, }; |
| |
| /* we don't need to take the STATE_LOCK, it is already taken */ |
| current = (GstState) GST_STATE_TRANSITION_CURRENT (transition); |
| next = (GstState) GST_STATE_TRANSITION_NEXT (transition); |
| |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, element, |
| "changing state of children from %s to %s", |
| gst_element_state_get_name (current), gst_element_state_get_name (next)); |
| |
| bin = GST_BIN_CAST (element); |
| |
| switch (next) { |
| case GST_STATE_PLAYING: |
| { |
| gboolean toplevel, asynchandling; |
| |
| GST_OBJECT_LOCK (bin); |
| toplevel = BIN_IS_TOPLEVEL (bin); |
| asynchandling = bin->priv->asynchandling; |
| GST_OBJECT_UNLOCK (bin); |
| |
| if (toplevel) |
| gst_bin_recalculate_latency (bin); |
| if (asynchandling) |
| gst_element_post_message (element, |
| gst_message_new_latency (GST_OBJECT_CAST (element))); |
| break; |
| } |
| case GST_STATE_PAUSED: |
| /* Clear EOS list on next PAUSED */ |
| GST_OBJECT_LOCK (bin); |
| GST_DEBUG_OBJECT (element, "clearing EOS elements"); |
| bin_remove_messages (bin, NULL, GST_MESSAGE_EOS); |
| bin->priv->posted_eos = FALSE; |
| if (current == GST_STATE_READY) |
| bin_remove_messages (bin, NULL, GST_MESSAGE_STREAM_START); |
| GST_OBJECT_UNLOCK (bin); |
| if (current == GST_STATE_READY) |
| if (!(gst_bin_src_pads_activate (bin, TRUE))) |
| goto activate_failure; |
| break; |
| case GST_STATE_READY: |
| /* Clear message list on next READY */ |
| GST_OBJECT_LOCK (bin); |
| GST_DEBUG_OBJECT (element, "clearing all cached messages"); |
| bin_remove_messages (bin, NULL, GST_MESSAGE_ANY); |
| GST_OBJECT_UNLOCK (bin); |
| /* We might not have reached PAUSED yet due to async errors, |
| * make sure to always deactivate the pads nonetheless */ |
| if (!(gst_bin_src_pads_activate (bin, FALSE))) |
| goto activate_failure; |
| break; |
| case GST_STATE_NULL: |
| /* Clear message list on next NULL */ |
| GST_OBJECT_LOCK (bin); |
| GST_DEBUG_OBJECT (element, "clearing all cached messages"); |
| bin_remove_messages (bin, NULL, GST_MESSAGE_ANY); |
| GST_OBJECT_UNLOCK (bin); |
| if (current == GST_STATE_READY) { |
| if (!(gst_bin_src_pads_activate (bin, FALSE))) |
| goto activate_failure; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| /* this flag is used to make the async state changes return immediately. We |
| * don't want them to interfere with this state change */ |
| GST_OBJECT_LOCK (bin); |
| bin->polling = TRUE; |
| GST_OBJECT_UNLOCK (bin); |
| |
| /* iterate in state change order */ |
| it = gst_bin_iterate_sorted (bin); |
| |
| /* mark if we've seen an ASYNC element in the bin when we did a state change. |
| * Note how we don't reset this value when a resync happens, the reason being |
| * that the async element posted ASYNC_START and we want to post ASYNC_DONE |
| * even after a resync when the async element is gone */ |
| have_async = FALSE; |
| |
| restart: |
| /* take base_time */ |
| base_time = gst_element_get_base_time (element); |
| start_time = gst_element_get_start_time (element); |
| |
| have_no_preroll = FALSE; |
| |
| done = FALSE; |
| while (!done) { |
| switch (gst_iterator_next (it, &data)) { |
| case GST_ITERATOR_OK: |
| { |
| GstElement *child; |
| |
| child = g_value_get_object (&data); |
| |
| /* set state and base_time now */ |
| ret = gst_bin_element_set_state (bin, child, base_time, start_time, |
| current, next); |
| |
| switch (ret) { |
| case GST_STATE_CHANGE_SUCCESS: |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, element, |
| "child '%s' changed state to %d(%s) successfully", |
| GST_ELEMENT_NAME (child), next, |
| gst_element_state_get_name (next)); |
| break; |
| case GST_STATE_CHANGE_ASYNC: |
| { |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, element, |
| "child '%s' is changing state asynchronously to %s", |
| GST_ELEMENT_NAME (child), gst_element_state_get_name (next)); |
| have_async = TRUE; |
| break; |
| } |
| case GST_STATE_CHANGE_FAILURE:{ |
| GstObject *parent; |
| |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, element, |
| "child '%s' failed to go to state %d(%s)", |
| GST_ELEMENT_NAME (child), |
| next, gst_element_state_get_name (next)); |
| |
| /* Only fail if the child is still inside |
| * this bin. It might've been removed already |
| * because of the error by the bin subclass |
| * to ignore the error. */ |
| parent = gst_object_get_parent (GST_OBJECT_CAST (child)); |
| if (parent == GST_OBJECT_CAST (element)) { |
| /* element is still in bin, really error now */ |
| gst_object_unref (parent); |
| goto undo; |
| } |
| /* child removed from bin, let the resync code redo the state |
| * change */ |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, element, |
| "child '%s' was removed from the bin", |
| GST_ELEMENT_NAME (child)); |
| |
| if (parent) |
| gst_object_unref (parent); |
| |
| break; |
| } |
| case GST_STATE_CHANGE_NO_PREROLL: |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, element, |
| "child '%s' changed state to %d(%s) successfully without preroll", |
| GST_ELEMENT_NAME (child), next, |
| gst_element_state_get_name (next)); |
| have_no_preroll = TRUE; |
| break; |
| default: |
| g_assert_not_reached (); |
| break; |
| } |
| g_value_reset (&data); |
| break; |
| } |
| case GST_ITERATOR_RESYNC: |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, element, "iterator doing resync"); |
| gst_iterator_resync (it); |
| goto restart; |
| default: |
| case GST_ITERATOR_DONE: |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, element, "iterator done"); |
| done = TRUE; |
| break; |
| } |
| } |
| |
| ret = GST_ELEMENT_CLASS (parent_class)->change_state (element, transition); |
| if (G_UNLIKELY (ret == GST_STATE_CHANGE_FAILURE)) |
| goto done; |
| |
| if (have_no_preroll) { |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, bin, |
| "we have NO_PREROLL elements %s -> NO_PREROLL", |
| gst_element_state_change_return_get_name (ret)); |
| ret = GST_STATE_CHANGE_NO_PREROLL; |
| } else if (have_async) { |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, bin, |
| "we have ASYNC elements %s -> ASYNC", |
| gst_element_state_change_return_get_name (ret)); |
| ret = GST_STATE_CHANGE_ASYNC; |
| } |
| |
| done: |
| g_value_unset (&data); |
| gst_iterator_free (it); |
| |
| GST_OBJECT_LOCK (bin); |
| bin->polling = FALSE; |
| /* it's possible that we did not get ASYNC from the children while the bin is |
| * simulating ASYNC behaviour by posting an ASYNC_DONE message on the bus with |
| * itself as the source. In that case we still want to check if the state |
| * change completed. */ |
| if (ret != GST_STATE_CHANGE_ASYNC && !bin->priv->pending_async_done) { |
| /* no element returned ASYNC and there are no pending async_done messages, |
| * we can just complete. */ |
| GST_DEBUG_OBJECT (bin, "no async elements"); |
| goto state_end; |
| } |
| /* when we get here an ASYNC element was found */ |
| if (GST_STATE_TARGET (bin) <= GST_STATE_READY) { |
| /* we ignore ASYNC state changes when we go to READY or NULL */ |
| GST_DEBUG_OBJECT (bin, "target state %s <= READY", |
| gst_element_state_get_name (GST_STATE_TARGET (bin))); |
| goto state_end; |
| } |
| |
| GST_DEBUG_OBJECT (bin, "check async elements"); |
| /* check if all elements managed to commit their state already */ |
| if (!find_message (bin, NULL, GST_MESSAGE_ASYNC_START)) { |
| /* nothing found, remove all old ASYNC_DONE messages. This can happen when |
| * all the elements commited their state while we were doing the state |
| * change. We will still return ASYNC for consistency but we commit the |
| * state already so that a _get_state() will return immediately. */ |
| bin_remove_messages (bin, NULL, GST_MESSAGE_ASYNC_DONE); |
| |
| GST_DEBUG_OBJECT (bin, "async elements commited"); |
| bin_handle_async_done (bin, GST_STATE_CHANGE_SUCCESS, FALSE, |
| GST_CLOCK_TIME_NONE); |
| } |
| |
| state_end: |
| bin->priv->pending_async_done = FALSE; |
| GST_OBJECT_UNLOCK (bin); |
| |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, element, |
| "done changing bin's state from %s to %s, now in %s, ret %s", |
| gst_element_state_get_name (current), |
| gst_element_state_get_name (next), |
| gst_element_state_get_name (GST_STATE (element)), |
| gst_element_state_change_return_get_name (ret)); |
| |
| return ret; |
| |
| /* ERRORS */ |
| activate_failure: |
| { |
| GST_CAT_WARNING_OBJECT (GST_CAT_STATES, element, |
| "failure (de)activating src pads"); |
| return GST_STATE_CHANGE_FAILURE; |
| } |
| |
| undo: |
| { |
| if (current < next) { |
| GstIterator *it = gst_bin_iterate_sorted (GST_BIN (element)); |
| GstIteratorResult ret; |
| |
| GST_DEBUG_OBJECT (element, |
| "Bin failed to change state, switching children back to %s", |
| gst_element_state_get_name (current)); |
| while (TRUE) { |
| ret = |
| gst_iterator_foreach (it, &reset_state, GINT_TO_POINTER (current)); |
| if (ret != GST_ITERATOR_RESYNC) |
| break; |
| gst_iterator_resync (it); |
| } |
| gst_iterator_free (it); |
| } |
| goto done; |
| } |
| } |
| |
| /* |
| * This function is a utility event handler. It will send the event to all sinks |
| * or sources and appropriate ghost pads depending on the event-direction. |
| * |
| * Applications are free to override this behaviour and implement their own |
| * handler, but this will work for pretty much all cases in practice. |
| */ |
| static gboolean |
| gst_bin_send_event (GstElement * element, GstEvent * event) |
| { |
| GstBin *bin = GST_BIN_CAST (element); |
| GstIterator *iter; |
| gboolean res = TRUE; |
| gboolean done = FALSE; |
| GValue data = { 0, }; |
| |
| if (GST_EVENT_IS_DOWNSTREAM (event)) { |
| iter = gst_bin_iterate_sources (bin); |
| GST_DEBUG_OBJECT (bin, "Sending %s event to src children", |
| GST_EVENT_TYPE_NAME (event)); |
| } else { |
| iter = gst_bin_iterate_sinks (bin); |
| GST_DEBUG_OBJECT (bin, "Sending %s event to sink children", |
| GST_EVENT_TYPE_NAME (event)); |
| } |
| |
| while (!done) { |
| switch (gst_iterator_next (iter, &data)) { |
| case GST_ITERATOR_OK: |
| { |
| GstElement *child = g_value_get_object (&data); |
| |
| gst_event_ref (event); |
| res &= gst_element_send_event (child, event); |
| |
| GST_LOG_OBJECT (child, "After handling %s event: %d", |
| GST_EVENT_TYPE_NAME (event), res); |
| |
| g_value_reset (&data); |
| break; |
| } |
| case GST_ITERATOR_RESYNC: |
| gst_iterator_resync (iter); |
| res = TRUE; |
| break; |
| case GST_ITERATOR_DONE: |
| done = TRUE; |
| break; |
| case GST_ITERATOR_ERROR: |
| g_assert_not_reached (); |
| break; |
| } |
| } |
| g_value_unset (&data); |
| gst_iterator_free (iter); |
| |
| if (GST_EVENT_IS_DOWNSTREAM (event)) { |
| iter = gst_element_iterate_sink_pads (GST_ELEMENT (bin)); |
| GST_DEBUG_OBJECT (bin, "Sending %s event to sink pads", |
| GST_EVENT_TYPE_NAME (event)); |
| } else { |
| iter = gst_element_iterate_src_pads (GST_ELEMENT (bin)); |
| GST_DEBUG_OBJECT (bin, "Sending %s event to src pads", |
| GST_EVENT_TYPE_NAME (event)); |
| } |
| |
| done = FALSE; |
| while (!done) { |
| switch (gst_iterator_next (iter, &data)) { |
| case GST_ITERATOR_OK: |
| { |
| GstPad *pad = g_value_get_object (&data); |
| |
| gst_event_ref (event); |
| res &= gst_pad_send_event (pad, event); |
| GST_LOG_OBJECT (pad, "After handling %s event: %d", |
| GST_EVENT_TYPE_NAME (event), res); |
| break; |
| } |
| case GST_ITERATOR_RESYNC: |
| gst_iterator_resync (iter); |
| res = TRUE; |
| break; |
| case GST_ITERATOR_DONE: |
| done = TRUE; |
| break; |
| case GST_ITERATOR_ERROR: |
| g_assert_not_reached (); |
| break; |
| } |
| } |
| |
| g_value_unset (&data); |
| gst_iterator_free (iter); |
| gst_event_unref (event); |
| |
| return res; |
| } |
| |
| /* this is the function called by the threadpool. When async elements commit |
| * their state, this function will attempt to bring the bin to the next state. |
| */ |
| static void |
| gst_bin_continue_func (GstBin * bin, BinContinueData * data) |
| { |
| GstState current, next, pending; |
| GstStateChange transition; |
| |
| pending = data->pending; |
| |
| GST_DEBUG_OBJECT (bin, "waiting for state lock"); |
| GST_STATE_LOCK (bin); |
| |
| GST_DEBUG_OBJECT (bin, "doing state continue"); |
| GST_OBJECT_LOCK (bin); |
| |
| /* if a new state change happened after this thread was scheduled, we return |
| * immediately. */ |
| if (data->cookie != GST_ELEMENT_CAST (bin)->state_cookie) |
| goto interrupted; |
| |
| current = GST_STATE (bin); |
| next = GST_STATE_GET_NEXT (current, pending); |
| transition = (GstStateChange) GST_STATE_TRANSITION (current, next); |
| |
| GST_STATE_NEXT (bin) = next; |
| GST_STATE_PENDING (bin) = pending; |
| /* mark busy */ |
| GST_STATE_RETURN (bin) = GST_STATE_CHANGE_ASYNC; |
| GST_OBJECT_UNLOCK (bin); |
| |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, bin, |
| "continue state change %s to %s, final %s", |
| gst_element_state_get_name (current), |
| gst_element_state_get_name (next), gst_element_state_get_name (pending)); |
| |
| gst_element_change_state (GST_ELEMENT_CAST (bin), transition); |
| |
| GST_STATE_UNLOCK (bin); |
| GST_DEBUG_OBJECT (bin, "state continue done"); |
| |
| return; |
| |
| interrupted: |
| { |
| GST_OBJECT_UNLOCK (bin); |
| GST_STATE_UNLOCK (bin); |
| GST_DEBUG_OBJECT (bin, "state continue aborted due to intervening change"); |
| return; |
| } |
| } |
| |
| static GstBusSyncReply |
| bin_bus_handler (GstBus * bus, GstMessage * message, GstBin * bin) |
| { |
| GstBinClass *bclass; |
| |
| bclass = GST_BIN_GET_CLASS (bin); |
| if (bclass->handle_message) |
| bclass->handle_message (bin, message); |
| else |
| gst_message_unref (message); |
| |
| return GST_BUS_DROP; |
| } |
| |
| static void |
| free_bin_continue_data (BinContinueData * data) |
| { |
| g_slice_free (BinContinueData, data); |
| } |
| |
| static void |
| bin_push_state_continue (GstBin * bin, BinContinueData * data) |
| { |
| GST_DEBUG_OBJECT (bin, "pushing continue on thread pool"); |
| gst_element_call_async (GST_ELEMENT_CAST (bin), |
| (GstElementCallAsyncFunc) gst_bin_continue_func, data, |
| (GDestroyNotify) free_bin_continue_data); |
| } |
| |
| /* an element started an async state change, if we were not busy with a state |
| * change, we perform a lost state. |
| * This function is called with the OBJECT lock. |
| */ |
| static void |
| bin_handle_async_start (GstBin * bin) |
| { |
| GstState old_state, new_state; |
| gboolean toplevel; |
| GstMessage *amessage = NULL; |
| |
| if (GST_STATE_RETURN (bin) == GST_STATE_CHANGE_FAILURE) |
| goto had_error; |
| |
| /* get our toplevel state */ |
| toplevel = BIN_IS_TOPLEVEL (bin); |
| |
| /* prepare an ASYNC_START message, we always post the start message even if we |
| * are busy with a state change or when we are NO_PREROLL. */ |
| if (!toplevel) |
| /* non toplevel bin, prepare async-start for the parent */ |
| amessage = gst_message_new_async_start (GST_OBJECT_CAST (bin)); |
| |
| if (bin->polling || GST_STATE_PENDING (bin) != GST_STATE_VOID_PENDING) |
| goto was_busy; |
| |
| /* async starts are ignored when we are NO_PREROLL */ |
| if (GST_STATE_RETURN (bin) == GST_STATE_CHANGE_NO_PREROLL) |
| goto was_no_preroll; |
| |
| old_state = GST_STATE (bin); |
| |
| /* when we PLAYING we go back to PAUSED, when preroll happens, we go back to |
| * PLAYING after optionally redistributing the base_time. */ |
| if (old_state > GST_STATE_PAUSED) |
| new_state = GST_STATE_PAUSED; |
| else |
| new_state = old_state; |
| |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, bin, |
| "lost state of %s, new %s", gst_element_state_get_name (old_state), |
| gst_element_state_get_name (new_state)); |
| |
| GST_STATE (bin) = new_state; |
| GST_STATE_NEXT (bin) = new_state; |
| GST_STATE_PENDING (bin) = new_state; |
| GST_STATE_RETURN (bin) = GST_STATE_CHANGE_ASYNC; |
| GST_OBJECT_UNLOCK (bin); |
| |
| /* post message */ |
| _priv_gst_element_state_changed (GST_ELEMENT_CAST (bin), new_state, new_state, |
| new_state); |
| |
| post_start: |
| if (amessage) { |
| /* post our ASYNC_START. */ |
| GST_DEBUG_OBJECT (bin, "posting ASYNC_START to parent"); |
| gst_element_post_message (GST_ELEMENT_CAST (bin), amessage); |
| } |
| GST_OBJECT_LOCK (bin); |
| |
| return; |
| |
| had_error: |
| { |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, bin, "we had an error"); |
| return; |
| } |
| was_busy: |
| { |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, bin, "state change busy"); |
| GST_OBJECT_UNLOCK (bin); |
| goto post_start; |
| } |
| was_no_preroll: |
| { |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, bin, "ignoring, we are NO_PREROLL"); |
| GST_OBJECT_UNLOCK (bin); |
| goto post_start; |
| } |
| } |
| |
| /* this function is called when there are no more async elements in the bin. We |
| * post a state changed message and an ASYNC_DONE message. |
| * This function is called with the OBJECT lock. |
| */ |
| static void |
| bin_handle_async_done (GstBin * bin, GstStateChangeReturn ret, |
| gboolean flag_pending, GstClockTime running_time) |
| { |
| GstState current, pending, target; |
| GstStateChangeReturn old_ret; |
| GstState old_state, old_next; |
| gboolean toplevel, state_changed = FALSE; |
| GstMessage *amessage = NULL; |
| BinContinueData *cont = NULL; |
| |
| if (GST_STATE_RETURN (bin) == GST_STATE_CHANGE_FAILURE) |
| goto had_error; |
| |
| pending = GST_STATE_PENDING (bin); |
| |
| if (bin->polling) |
| goto was_busy; |
| |
| /* check if there is something to commit */ |
| if (pending == GST_STATE_VOID_PENDING) |
| goto nothing_pending; |
| |
| old_ret = GST_STATE_RETURN (bin); |
| GST_STATE_RETURN (bin) = ret; |
| |
| /* move to the next target state */ |
| target = GST_STATE_TARGET (bin); |
| pending = GST_STATE_PENDING (bin) = target; |
| |
| amessage = gst_message_new_async_done (GST_OBJECT_CAST (bin), running_time); |
| |
| old_state = GST_STATE (bin); |
| /* this is the state we should go to next */ |
| old_next = GST_STATE_NEXT (bin); |
| |
| if (old_next != GST_STATE_PLAYING) { |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, bin, |
| "committing state from %s to %s, old pending %s", |
| gst_element_state_get_name (old_state), |
| gst_element_state_get_name (old_next), |
| gst_element_state_get_name (pending)); |
| |
| /* update current state */ |
| current = GST_STATE (bin) = old_next; |
| } else { |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, bin, |
| "setting state from %s to %s, pending %s", |
| gst_element_state_get_name (old_state), |
| gst_element_state_get_name (old_state), |
| gst_element_state_get_name (pending)); |
| current = old_state; |
| } |
| |
| /* get our toplevel state */ |
| toplevel = BIN_IS_TOPLEVEL (bin); |
| |
| /* see if we reached the final state. If we are not toplevel, we also have to |
| * stop here, the parent will continue our state. */ |
| if ((pending == current) || !toplevel) { |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, bin, |
| "completed state change, pending VOID"); |
| |
| /* mark VOID pending */ |
| pending = GST_STATE_VOID_PENDING; |
| GST_STATE_PENDING (bin) = pending; |
| GST_STATE_NEXT (bin) = GST_STATE_VOID_PENDING; |
| } else { |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, bin, |
| "continue state change, pending %s", |
| gst_element_state_get_name (pending)); |
| |
| cont = g_slice_new (BinContinueData); |
| |
| /* cookie to detect concurrent state change */ |
| cont->cookie = GST_ELEMENT_CAST (bin)->state_cookie; |
| /* pending target state */ |
| cont->pending = pending; |
| /* mark busy */ |
| GST_STATE_RETURN (bin) = GST_STATE_CHANGE_ASYNC; |
| GST_STATE_NEXT (bin) = GST_STATE_GET_NEXT (old_state, pending); |
| } |
| |
| if (old_next != GST_STATE_PLAYING) { |
| if (old_state != old_next || old_ret == GST_STATE_CHANGE_ASYNC) { |
| state_changed = TRUE; |
| } |
| } |
| GST_OBJECT_UNLOCK (bin); |
| |
| if (state_changed) { |
| _priv_gst_element_state_changed (GST_ELEMENT_CAST (bin), old_state, |
| old_next, pending); |
| } |
| if (amessage) { |
| /* post our combined ASYNC_DONE when all is ASYNC_DONE. */ |
| GST_DEBUG_OBJECT (bin, "posting ASYNC_DONE to parent"); |
| gst_element_post_message (GST_ELEMENT_CAST (bin), amessage); |
| } |
| |
| GST_OBJECT_LOCK (bin); |
| if (cont) { |
| /* toplevel, start continue state */ |
| GST_DEBUG_OBJECT (bin, "all async-done, starting state continue"); |
| bin_push_state_continue (bin, cont); |
| } else { |
| GST_DEBUG_OBJECT (bin, "state change complete"); |
| GST_STATE_BROADCAST (bin); |
| } |
| return; |
| |
| had_error: |
| { |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, bin, "we had an error"); |
| return; |
| } |
| was_busy: |
| { |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, bin, "state change busy"); |
| /* if we were busy with a state change and we are requested to flag a |
| * pending async done, we do so here */ |
| if (flag_pending) |
| bin->priv->pending_async_done = TRUE; |
| return; |
| } |
| nothing_pending: |
| { |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, bin, "nothing pending"); |
| return; |
| } |
| } |
| |
| static void |
| bin_do_eos (GstBin * bin) |
| { |
| guint32 seqnum = 0; |
| gboolean eos; |
| |
| GST_OBJECT_LOCK (bin); |
| /* If all sinks are EOS, we're in PLAYING and no state change is pending |
| * (or we're doing playing to playing and noone else will trigger posting |
| * EOS for us) we forward the EOS message to the parent bin or application |
| */ |
| eos = GST_STATE (bin) == GST_STATE_PLAYING |
| && (GST_STATE_PENDING (bin) == GST_STATE_VOID_PENDING || |
| GST_STATE_PENDING (bin) == GST_STATE_PLAYING) |
| && bin->priv->posted_playing && is_eos (bin, &seqnum); |
| GST_OBJECT_UNLOCK (bin); |
| |
| if (eos |
| && g_atomic_int_compare_and_exchange (&bin->priv->posted_eos, FALSE, |
| TRUE)) { |
| GstMessage *tmessage; |
| |
| /* Clear out any further messages, and reset posted_eos so we can |
| detect any new EOS that happens (eg, after a seek). Since all |
| sinks have now posted an EOS, there will be no further EOS events |
| seen unless there is a new logical EOS */ |
| GST_OBJECT_LOCK (bin); |
| bin_remove_messages (bin, NULL, GST_MESSAGE_EOS); |
| bin->priv->posted_eos = FALSE; |
| GST_OBJECT_UNLOCK (bin); |
| |
| tmessage = gst_message_new_eos (GST_OBJECT_CAST (bin)); |
| gst_message_set_seqnum (tmessage, seqnum); |
| GST_DEBUG_OBJECT (bin, |
| "all sinks posted EOS, posting seqnum #%" G_GUINT32_FORMAT, seqnum); |
| gst_element_post_message (GST_ELEMENT_CAST (bin), tmessage); |
| } else { |
| GST_LOG_OBJECT (bin, "Not forwarding EOS due to in progress state change, " |
| " or already posted, or waiting for more EOS"); |
| } |
| } |
| |
| static void |
| bin_do_stream_start (GstBin * bin) |
| { |
| guint32 seqnum = 0; |
| gboolean stream_start; |
| gboolean have_group_id = FALSE; |
| guint group_id = 0; |
| |
| GST_OBJECT_LOCK (bin); |
| /* If all sinks are STREAM_START we forward the STREAM_START message |
| * to the parent bin or application |
| */ |
| stream_start = is_stream_start (bin, &seqnum, &have_group_id, &group_id); |
| GST_OBJECT_UNLOCK (bin); |
| |
| if (stream_start) { |
| GstMessage *tmessage; |
| |
| GST_OBJECT_LOCK (bin); |
| bin_remove_messages (bin, NULL, GST_MESSAGE_STREAM_START); |
| GST_OBJECT_UNLOCK (bin); |
| |
| tmessage = gst_message_new_stream_start (GST_OBJECT_CAST (bin)); |
| gst_message_set_seqnum (tmessage, seqnum); |
| if (have_group_id) |
| gst_message_set_group_id (tmessage, group_id); |
| |
| GST_DEBUG_OBJECT (bin, |
| "all sinks posted STREAM_START, posting seqnum #%" G_GUINT32_FORMAT, |
| seqnum); |
| gst_element_post_message (GST_ELEMENT_CAST (bin), tmessage); |
| } |
| } |
| |
| /* must be called without the object lock as it posts messages */ |
| static void |
| bin_do_message_forward (GstBin * bin, GstMessage * message) |
| { |
| if (bin->priv->message_forward) { |
| GstMessage *forwarded; |
| |
| GST_DEBUG_OBJECT (bin, "pass %s message upward", |
| GST_MESSAGE_TYPE_NAME (message)); |
| |
| /* we need to convert these messages to element messages so that our parent |
| * bin can easily ignore them and so that the application can easily |
| * distinguish between the internally forwarded and the real messages. */ |
| forwarded = gst_message_new_element (GST_OBJECT_CAST (bin), |
| gst_structure_new ("GstBinForwarded", |
| "message", GST_TYPE_MESSAGE, message, NULL)); |
| |
| gst_element_post_message (GST_ELEMENT_CAST (bin), forwarded); |
| } |
| } |
| |
| static void |
| gst_bin_update_context (GstBin * bin, GstContext * context) |
| { |
| GST_OBJECT_LOCK (bin); |
| gst_bin_update_context_unlocked (bin, context); |
| GST_OBJECT_UNLOCK (bin); |
| } |
| |
| static void |
| gst_bin_update_context_unlocked (GstBin * bin, GstContext * context) |
| { |
| const gchar *context_type; |
| GList *l, **contexts; |
| |
| contexts = &GST_ELEMENT_CAST (bin)->contexts; |
| context_type = gst_context_get_context_type (context); |
| |
| GST_DEBUG_OBJECT (bin, "set context %p %" GST_PTR_FORMAT, context, |
| gst_context_get_structure (context)); |
| for (l = *contexts; l; l = l->next) { |
| GstContext *tmp = l->data; |
| const gchar *tmp_type = gst_context_get_context_type (tmp); |
| |
| /* Always store newest context but never replace |
| * a persistent one by a non-persistent one */ |
| if (strcmp (context_type, tmp_type) == 0 && |
| (gst_context_is_persistent (context) || |
| !gst_context_is_persistent (tmp))) { |
| gst_context_replace ((GstContext **) & l->data, context); |
| break; |
| } |
| } |
| /* Not found? Add */ |
| if (l == NULL) { |
| *contexts = g_list_prepend (*contexts, gst_context_ref (context)); |
| } |
| } |
| |
| /* handle child messages: |
| * |
| * This method is called synchronously when a child posts a message on |
| * the internal bus. |
| * |
| * GST_MESSAGE_EOS: This message is only posted by sinks |
| * in the PLAYING state. If all sinks posted the EOS message, post |
| * one upwards. |
| * |
| * GST_MESSAGE_STATE_DIRTY: Deprecated |
| * |
| * GST_MESSAGE_SEGMENT_START: just collect, never forward upwards. If an |
| * element posts segment_start twice, only the last message is kept. |
| * |
| * GST_MESSAGE_SEGMENT_DONE: replace SEGMENT_START message from same poster |
| * with the segment_done message. If there are no more segment_start |
| * messages, post segment_done message upwards. |
| * |
| * GST_MESSAGE_DURATION_CHANGED: clear any cached durations. |
| * Whenever someone performs a duration query on the bin, we store the |
| * result so we can answer it quicker the next time. Any element that |
| * changes its duration marks our cached values invalid. |
| * This message is also posted upwards. This is currently disabled |
| * because too many elements don't post DURATION_CHANGED messages when |
| * the duration changes. |
| * |
| * GST_MESSAGE_CLOCK_LOST: This message is posted by an element when it |
| * can no longer provide a clock. The default bin behaviour is to |
| * check if the lost clock was the one provided by the bin. If so and |
| * we are currently in the PLAYING state, we forward the message to |
| * our parent. |
| * This message is also generated when we remove a clock provider from |
| * a bin. If this message is received by the application, it should |
| * PAUSE the pipeline and set it back to PLAYING to force a new clock |
| * and a new base_time distribution. |
| * |
| * GST_MESSAGE_CLOCK_PROVIDE: This message is generated when an element |
| * can provide a clock. This mostly happens when we add a new clock |
| * provider to the bin. The default behaviour of the bin is to mark the |
| * currently selected clock as dirty, which will perform a clock |
| * recalculation the next time we are asked to provide a clock. |
| * This message is never sent to the application but is forwarded to |
| * the parent. |
| * |
| * GST_MESSAGE_ASYNC_START: Create an internal ELEMENT message that stores |
| * the state of the element and the fact that the element will need a |
| * new base_time. This message is not forwarded to the application. |
| * |
| * GST_MESSAGE_ASYNC_DONE: Find the internal ELEMENT message we kept for the |
| * element when it posted ASYNC_START. If all elements are done, post a |
| * ASYNC_DONE message to the parent. |
| * |
| * OTHER: post upwards. |
| */ |
| static void |
| gst_bin_handle_message_func (GstBin * bin, GstMessage * message) |
| { |
| GstObject *src; |
| GstMessageType type; |
| GstMessage *tmessage; |
| guint32 seqnum; |
| |
| src = GST_MESSAGE_SRC (message); |
| type = GST_MESSAGE_TYPE (message); |
| |
| GST_DEBUG_OBJECT (bin, "[msg %p] handling child %s message of type %s", |
| message, src ? GST_ELEMENT_NAME (src) : "(NULL)", |
| GST_MESSAGE_TYPE_NAME (message)); |
| |
| switch (type) { |
| case GST_MESSAGE_ERROR: |
| { |
| GST_OBJECT_LOCK (bin); |
| /* flag error */ |
| GST_DEBUG_OBJECT (bin, "got ERROR message, unlocking state change"); |
| GST_STATE_RETURN (bin) = GST_STATE_CHANGE_FAILURE; |
| GST_STATE_BROADCAST (bin); |
| GST_OBJECT_UNLOCK (bin); |
| |
| goto forward; |
| } |
| case GST_MESSAGE_EOS: |
| { |
| |
| /* collect all eos messages from the children */ |
| bin_do_message_forward (bin, message); |
| GST_OBJECT_LOCK (bin); |
| /* ref message for future use */ |
| bin_replace_message (bin, message, GST_MESSAGE_EOS); |
| GST_OBJECT_UNLOCK (bin); |
| |
| bin_do_eos (bin); |
| break; |
| } |
| case GST_MESSAGE_STREAM_START: |
| { |
| |
| /* collect all stream_start messages from the children */ |
| GST_OBJECT_LOCK (bin); |
| /* ref message for future use */ |
| bin_replace_message (bin, message, GST_MESSAGE_STREAM_START); |
| GST_OBJECT_UNLOCK (bin); |
| |
| bin_do_stream_start (bin); |
| break; |
| } |
| case GST_MESSAGE_STATE_DIRTY: |
| { |
| GST_WARNING_OBJECT (bin, "received deprecated STATE_DIRTY message"); |
| |
| /* free message */ |
| gst_message_unref (message); |
| break; |
| } |
| case GST_MESSAGE_SEGMENT_START:{ |
| gboolean post = FALSE; |
| GstFormat format; |
| gint64 position; |
| |
| gst_message_parse_segment_start (message, &format, &position); |
| seqnum = gst_message_get_seqnum (message); |
| |
| bin_do_message_forward (bin, message); |
| |
| GST_OBJECT_LOCK (bin); |
| /* if this is the first segment-start, post to parent but not to the |
| * application */ |
| if (!find_message (bin, NULL, GST_MESSAGE_SEGMENT_START) && |
| (GST_OBJECT_PARENT (bin) != NULL)) { |
| post = TRUE; |
| } |
| /* replace any previous segment_start message from this source |
| * with the new segment start message */ |
| bin_replace_message (bin, message, GST_MESSAGE_SEGMENT_START); |
| GST_OBJECT_UNLOCK (bin); |
| if (post) { |
| tmessage = gst_message_new_segment_start (GST_OBJECT_CAST (bin), |
| format, position); |
| gst_message_set_seqnum (tmessage, seqnum); |
| |
| /* post segment start with initial format and position. */ |
| GST_DEBUG_OBJECT (bin, "posting SEGMENT_START (%u) bus message: %p", |
| seqnum, message); |
| gst_element_post_message (GST_ELEMENT_CAST (bin), tmessage); |
| } |
| break; |
| } |
| case GST_MESSAGE_SEGMENT_DONE: |
| { |
| gboolean post = FALSE; |
| GstFormat format; |
| gint64 position; |
| |
| gst_message_parse_segment_done (message, &format, &position); |
| seqnum = gst_message_get_seqnum (message); |
| |
| bin_do_message_forward (bin, message); |
| |
| GST_OBJECT_LOCK (bin); |
| bin_replace_message (bin, message, GST_MESSAGE_SEGMENT_START); |
| /* if there are no more segment_start messages, everybody posted |
| * a segment_done and we can post one on the bus. */ |
| |
| /* we don't care who still has a pending segment start */ |
| if (!find_message (bin, NULL, GST_MESSAGE_SEGMENT_START)) { |
| /* nothing found */ |
| post = TRUE; |
| /* remove all old segment_done messages */ |
| bin_remove_messages (bin, NULL, GST_MESSAGE_SEGMENT_DONE); |
| } |
| GST_OBJECT_UNLOCK (bin); |
| if (post) { |
| tmessage = gst_message_new_segment_done (GST_OBJECT_CAST (bin), |
| format, position); |
| gst_message_set_seqnum (tmessage, seqnum); |
| |
| /* post segment done with latest format and position. */ |
| GST_DEBUG_OBJECT (bin, "posting SEGMENT_DONE (%u) bus message: %p", |
| seqnum, message); |
| gst_element_post_message (GST_ELEMENT_CAST (bin), tmessage); |
| } |
| break; |
| } |
| case GST_MESSAGE_DURATION_CHANGED: |
| { |
| /* FIXME: remove all cached durations, next time somebody asks |
| * for duration, we will recalculate. */ |
| #if 0 |
| GST_OBJECT_LOCK (bin); |
| bin_remove_messages (bin, NULL, GST_MESSAGE_DURATION_CHANGED); |
| GST_OBJECT_UNLOCK (bin); |
| #endif |
| goto forward; |
| } |
| case GST_MESSAGE_CLOCK_LOST: |
| { |
| GstClock **provided_clock_p; |
| GstElement **clock_provider_p; |
| gboolean playing, toplevel, provided, forward; |
| GstClock *clock; |
| |
| gst_message_parse_clock_lost (message, &clock); |
| |
| GST_OBJECT_LOCK (bin); |
| bin->clock_dirty = TRUE; |
| /* if we lost the clock that we provided, post to parent but |
| * only if we are not a top-level bin or PLAYING. |
| * The reason for this is that applications should be able |
| * to PAUSE/PLAY if they receive this message without worrying |
| * about the state of the pipeline. */ |
| provided = (clock == bin->provided_clock); |
| playing = (GST_STATE (bin) == GST_STATE_PLAYING); |
| toplevel = GST_OBJECT_PARENT (bin) == NULL; |
| forward = provided && (playing || !toplevel); |
| if (provided) { |
| GST_DEBUG_OBJECT (bin, |
| "Lost clock %" GST_PTR_FORMAT " provided by %" GST_PTR_FORMAT, |
| bin->provided_clock, bin->clock_provider); |
| provided_clock_p = &bin->provided_clock; |
| clock_provider_p = &bin->clock_provider; |
| gst_object_replace ((GstObject **) provided_clock_p, NULL); |
| gst_object_replace ((GstObject **) clock_provider_p, NULL); |
| } |
| GST_DEBUG_OBJECT (bin, "provided %d, playing %d, forward %d", |
| provided, playing, forward); |
| GST_OBJECT_UNLOCK (bin); |
| |
| if (forward) |
| goto forward; |
| |
| /* free message */ |
| gst_message_unref (message); |
| break; |
| } |
| case GST_MESSAGE_CLOCK_PROVIDE: |
| { |
| gboolean forward; |
| |
| GST_OBJECT_LOCK (bin); |
| bin->clock_dirty = TRUE; |
| /* a new clock is available, post to parent but not |
| * to the application */ |
| forward = GST_OBJECT_PARENT (bin) != NULL; |
| GST_OBJECT_UNLOCK (bin); |
| |
| if (forward) |
| goto forward; |
| |
| /* free message */ |
| gst_message_unref (message); |
| break; |
| } |
| case GST_MESSAGE_ASYNC_START: |
| { |
| GstState target; |
| |
| GST_DEBUG_OBJECT (bin, "ASYNC_START message %p, %s", message, |
| src ? GST_OBJECT_NAME (src) : "(NULL)"); |
| |
| bin_do_message_forward (bin, message); |
| |
| GST_OBJECT_LOCK (bin); |
| /* we ignore the message if we are going to <= READY */ |
| if ((target = GST_STATE_TARGET (bin)) <= GST_STATE_READY) |
| goto ignore_start_message; |
| |
| /* takes ownership of the message */ |
| bin_replace_message (bin, message, GST_MESSAGE_ASYNC_START); |
| |
| bin_handle_async_start (bin); |
| GST_OBJECT_UNLOCK (bin); |
| break; |
| |
| ignore_start_message: |
| { |
| GST_DEBUG_OBJECT (bin, "ignoring message, target %s", |
| gst_element_state_get_name (target)); |
| GST_OBJECT_UNLOCK (bin); |
| gst_message_unref (message); |
| break; |
| } |
| } |
| case GST_MESSAGE_ASYNC_DONE: |
| { |
| GstClockTime running_time; |
| GstState target; |
| |
| GST_DEBUG_OBJECT (bin, "ASYNC_DONE message %p, %s", message, |
| src ? GST_OBJECT_NAME (src) : "(NULL)"); |
| |
| gst_message_parse_async_done (message, &running_time); |
| |
| bin_do_message_forward (bin, message); |
| |
| GST_OBJECT_LOCK (bin); |
| /* ignore messages if we are shutting down */ |
| if ((target = GST_STATE_TARGET (bin)) <= GST_STATE_READY) |
| goto ignore_done_message; |
| |
| bin_replace_message (bin, message, GST_MESSAGE_ASYNC_START); |
| /* if there are no more ASYNC_START messages, everybody posted |
| * a ASYNC_DONE and we can post one on the bus. When checking, we |
| * don't care who still has a pending ASYNC_START */ |
| if (!find_message (bin, NULL, GST_MESSAGE_ASYNC_START)) { |
| /* nothing found, remove all old ASYNC_DONE messages */ |
| bin_remove_messages (bin, NULL, GST_MESSAGE_ASYNC_DONE); |
| |
| GST_DEBUG_OBJECT (bin, "async elements commited"); |
| /* when we get an async done message when a state change was busy, we |
| * need to set the pending_done flag so that at the end of the state |
| * change we can see if we need to verify pending async elements, hence |
| * the TRUE argument here. */ |
| bin_handle_async_done (bin, GST_STATE_CHANGE_SUCCESS, TRUE, |
| running_time); |
| } else { |
| GST_DEBUG_OBJECT (bin, "there are more async elements pending"); |
| } |
| GST_OBJECT_UNLOCK (bin); |
| break; |
| |
| ignore_done_message: |
| { |
| GST_DEBUG_OBJECT (bin, "ignoring message, target %s", |
| gst_element_state_get_name (target)); |
| GST_OBJECT_UNLOCK (bin); |
| gst_message_unref (message); |
| break; |
| } |
| } |
| case GST_MESSAGE_STRUCTURE_CHANGE: |
| { |
| gboolean busy; |
| |
| gst_message_parse_structure_change (message, NULL, NULL, &busy); |
| |
| GST_OBJECT_LOCK (bin); |
| if (busy) { |
| /* while the pad is busy, avoid following it when doing state changes. |
| * Don't update the cookie yet, we will do that after the structure |
| * change finished and we are ready to inspect the new updated |
| * structure. */ |
| bin_replace_message (bin, message, GST_MESSAGE_STRUCTURE_CHANGE); |
| message = NULL; |
| } else { |
| /* a pad link/unlink ended, signal the state change iterator that we |
| * need to resync by updating the structure_cookie. */ |
| bin_remove_messages (bin, GST_MESSAGE_SRC (message), |
| GST_MESSAGE_STRUCTURE_CHANGE); |
| if (!GST_BIN_IS_NO_RESYNC (bin)) |
| bin->priv->structure_cookie++; |
| } |
| GST_OBJECT_UNLOCK (bin); |
| |
| if (message) |
| gst_message_unref (message); |
| |
| break; |
| } |
| case GST_MESSAGE_NEED_CONTEXT:{ |
| const gchar *context_type; |
| GList *l, *contexts; |
| |
| gst_message_parse_context_type (message, &context_type); |
| GST_OBJECT_LOCK (bin); |
| contexts = GST_ELEMENT_CAST (bin)->contexts; |
| GST_LOG_OBJECT (bin, "got need-context message type: %s", context_type); |
| for (l = contexts; l; l = l->next) { |
| GstContext *tmp = l->data; |
| const gchar *tmp_type = gst_context_get_context_type (tmp); |
| |
| if (strcmp (context_type, tmp_type) == 0) { |
| gst_element_set_context (GST_ELEMENT (src), l->data); |
| break; |
| } |
| } |
| GST_OBJECT_UNLOCK (bin); |
| |
| /* Forward if we couldn't answer the message */ |
| if (l == NULL) { |
| goto forward; |
| } else { |
| gst_message_unref (message); |
| } |
| |
| break; |
| } |
| case GST_MESSAGE_HAVE_CONTEXT:{ |
| GstContext *context; |
| |
| gst_message_parse_have_context (message, &context); |
| gst_bin_update_context (bin, context); |
| gst_context_unref (context); |
| |
| goto forward; |
| break; |
| } |
| default: |
| goto forward; |
| } |
| return; |
| |
| forward: |
| { |
| /* Send all other messages upward */ |
| GST_DEBUG_OBJECT (bin, "posting message upward"); |
| gst_element_post_message (GST_ELEMENT_CAST (bin), message); |
| return; |
| } |
| } |
| |
| /* generic struct passed to all query fold methods */ |
| typedef struct |
| { |
| GstQuery *query; |
| gint64 min; |
| gint64 max; |
| gboolean live; |
| } QueryFold; |
| |
| typedef void (*QueryInitFunction) (GstBin * bin, QueryFold * fold); |
| typedef void (*QueryDoneFunction) (GstBin * bin, QueryFold * fold); |
| |
| /* for duration/position we collect all durations/positions and take |
| * the MAX of all valid results */ |
| static void |
| bin_query_min_max_init (GstBin * bin, QueryFold * fold) |
| { |
| fold->min = 0; |
| fold->max = -1; |
| fold->live = FALSE; |
| } |
| |
| static gboolean |
| bin_query_duration_fold (const GValue * vitem, GValue * ret, QueryFold * fold) |
| { |
| gboolean res = FALSE; |
| GstObject *item = g_value_get_object (vitem); |
| if (GST_IS_PAD (item)) |
| res = gst_pad_query (GST_PAD (item), fold->query); |
| else |
| res = gst_element_query (GST_ELEMENT (item), fold->query); |
| |
| if (res) { |
| gint64 duration; |
| |
| g_value_set_boolean (ret, TRUE); |
| |
| gst_query_parse_duration (fold->query, NULL, &duration); |
| |
| GST_DEBUG_OBJECT (item, "got duration %" G_GINT64_FORMAT, duration); |
| |
| if (duration == -1) { |
| /* duration query succeeded, but duration is unknown */ |
| fold->max = -1; |
| return FALSE; |
| } |
| |
| if (duration > fold->max) |
| fold->max = duration; |
| } |
| |
| return TRUE; |
| } |
| |
| static void |
| bin_query_duration_done (GstBin * bin, QueryFold * fold) |
| { |
| GstFormat format; |
| |
| gst_query_parse_duration (fold->query, &format, NULL); |
| /* store max in query result */ |
| gst_query_set_duration (fold->query, format, fold->max); |
| |
| GST_DEBUG_OBJECT (bin, "max duration %" G_GINT64_FORMAT, fold->max); |
| |
| /* FIXME: re-implement duration caching */ |
| #if 0 |
| /* and cache now */ |
| GST_OBJECT_LOCK (bin); |
| bin->messages = g_list_prepend (bin->messages, |
| gst_message_new_duration (GST_OBJECT_CAST (bin), format, fold->max)); |
| GST_OBJECT_UNLOCK (bin); |
| #endif |
| } |
| |
| static gboolean |
| bin_query_position_fold (const GValue * vitem, GValue * ret, QueryFold * fold) |
| { |
| gboolean res = FALSE; |
| GstObject *item = g_value_get_object (vitem); |
| if (GST_IS_PAD (item)) |
| res = gst_pad_query (GST_PAD (item), fold->query); |
| else |
| res = gst_element_query (GST_ELEMENT (item), fold->query); |
| |
| if (res) { |
| gint64 position; |
| |
| g_value_set_boolean (ret, TRUE); |
| |
| gst_query_parse_position (fold->query, NULL, &position); |
| |
| GST_DEBUG_OBJECT (item, "got position %" G_GINT64_FORMAT, position); |
| |
| if (position > fold->max) |
| fold->max = position; |
| } |
| |
| return TRUE; |
| } |
| |
| static void |
| bin_query_position_done (GstBin * bin, QueryFold * fold) |
| { |
| GstFormat format; |
| |
| gst_query_parse_position (fold->query, &format, NULL); |
| /* store max in query result */ |
| gst_query_set_position (fold->query, format, fold->max); |
| |
| GST_DEBUG_OBJECT (bin, "max position %" G_GINT64_FORMAT, fold->max); |
| } |
| |
| static gboolean |
| bin_query_latency_fold (const GValue * vitem, GValue * ret, QueryFold * fold) |
| { |
| gboolean res = FALSE; |
| GstObject *item = g_value_get_object (vitem); |
| if (GST_IS_PAD (item)) |
| res = gst_pad_query (GST_PAD (item), fold->query); |
| else |
| res = gst_element_query (GST_ELEMENT (item), fold->query); |
| if (res) { |
| GstClockTime min, max; |
| gboolean live; |
| |
| gst_query_parse_latency (fold->query, &live, &min, &max); |
| |
| GST_DEBUG_OBJECT (item, |
| "got latency min %" GST_TIME_FORMAT ", max %" GST_TIME_FORMAT |
| ", live %d", GST_TIME_ARGS (min), GST_TIME_ARGS (max), live); |
| |
| /* for the combined latency we collect the MAX of all min latencies and |
| * the MIN of all max latencies */ |
| if (live) { |
| if (min > fold->min) |
| fold->min = min; |
| if (fold->max == -1) |
| fold->max = max; |
| else if (max < fold->max) |
| fold->max = max; |
| if (!fold->live) |
| fold->live = live; |
| } |
| } else { |
| g_value_set_boolean (ret, FALSE); |
| GST_DEBUG_OBJECT (item, "failed query"); |
| } |
| |
| return TRUE; |
| } |
| |
| static void |
| bin_query_latency_done (GstBin * bin, QueryFold * fold) |
| { |
| /* store max in query result */ |
| gst_query_set_latency (fold->query, fold->live, fold->min, fold->max); |
| |
| GST_DEBUG_OBJECT (bin, |
| "latency min %" GST_TIME_FORMAT ", max %" GST_TIME_FORMAT |
| ", live %d", GST_TIME_ARGS (fold->min), GST_TIME_ARGS (fold->max), |
| fold->live); |
| } |
| |
| /* generic fold, return first valid result */ |
| static gboolean |
| bin_query_generic_fold (const GValue * vitem, GValue * ret, QueryFold * fold) |
| { |
| gboolean res = FALSE; |
| GstObject *item = g_value_get_object (vitem); |
| if (GST_IS_PAD (item)) |
| res = gst_pad_query (GST_PAD (item), fold->query); |
| else |
| res = gst_element_query (GST_ELEMENT (item), fold->query); |
| if (res) { |
| g_value_set_boolean (ret, TRUE); |
| GST_DEBUG_OBJECT (item, "answered query %p", fold->query); |
| } |
| |
| /* and stop as soon as we have a valid result */ |
| return !res; |
| } |
| |
| /* Perform a query iteration for the given bin. The query is stored in |
| * QueryFold and iter should be either a GstPad iterator or a |
| * GstElement iterator. */ |
| static gboolean |
| bin_iterate_fold (GstBin * bin, GstIterator * iter, QueryInitFunction fold_init, |
| QueryDoneFunction fold_done, GstIteratorFoldFunction fold_func, |
| QueryFold * fold_data, gboolean default_return) |
| { |
| gboolean res = default_return; |
| GValue ret = { 0 }; |
| /* set the result of the query to FALSE initially */ |
| g_value_init (&ret, G_TYPE_BOOLEAN); |
| g_value_set_boolean (&ret, res); |
| |
| while (TRUE) { |
| GstIteratorResult ires; |
| |
| ires = gst_iterator_fold (iter, fold_func, &ret, fold_data); |
| |
| switch (ires) { |
| case GST_ITERATOR_RESYNC: |
| gst_iterator_resync (iter); |
| if (fold_init) |
| fold_init (bin, fold_data); |
| g_value_set_boolean (&ret, res); |
| break; |
| case GST_ITERATOR_OK: |
| case GST_ITERATOR_DONE: |
| res = g_value_get_boolean (&ret); |
| if (fold_done != NULL && res) |
| fold_done (bin, fold_data); |
| goto done; |
| default: |
| res = FALSE; |
| goto done; |
| } |
| } |
| done: |
| return res; |
| } |
| |
| static gboolean |
| gst_bin_query (GstElement * element, GstQuery * query) |
| { |
| GstBin *bin = GST_BIN_CAST (element); |
| GstIterator *iter; |
| gboolean default_return = FALSE; |
| gboolean res = FALSE; |
| gboolean src_pads_query_result = FALSE; |
| GstIteratorFoldFunction fold_func; |
| QueryInitFunction fold_init = NULL; |
| QueryDoneFunction fold_done = NULL; |
| QueryFold fold_data; |
| |
| switch (GST_QUERY_TYPE (query)) { |
| case GST_QUERY_DURATION: |
| { |
| /* FIXME: implement duration caching in GstBin again */ |
| #if 0 |
| GList *cached; |
| GstFormat qformat; |
| |
| gst_query_parse_duration (query, &qformat, NULL); |
| |
| /* find cached duration query */ |
| GST_OBJECT_LOCK (bin); |
| for (cached = bin->messages; cached; cached = g_list_next (cached)) { |
| GstMessage *message = (GstMessage *) cached->data; |
| |
| if (GST_MESSAGE_TYPE (message) == GST_MESSAGE_DURATION_CHANGED && |
| GST_MESSAGE_SRC (message) == GST_OBJECT_CAST (bin)) { |
| GstFormat format; |
| gint64 duration; |
| |
| gst_message_parse_duration (message, &format, &duration); |
| |
| /* if cached same format, copy duration in query result */ |
| if (format == qformat) { |
| GST_DEBUG_OBJECT (bin, "return cached duration %" G_GINT64_FORMAT, |
| duration); |
| GST_OBJECT_UNLOCK (bin); |
| |
| gst_query_set_duration (query, qformat, duration); |
| res = TRUE; |
| goto exit; |
| } |
| } |
| } |
| GST_OBJECT_UNLOCK (bin); |
| #else |
| #ifndef GST_DISABLE_GST_DEBUG |
| G_STMT_START { |
| /* Quieten this particularly annoying FIXME a bit: */ |
| static gboolean printed_fixme = FALSE; |
| if (!printed_fixme) { |
| GST_FIXME ("implement duration caching in GstBin again"); |
| printed_fixme = TRUE; |
| } |
| } |
| G_STMT_END; |
| #endif |
| #endif |
| /* no cached value found, iterate and collect durations */ |
| fold_func = (GstIteratorFoldFunction) bin_query_duration_fold; |
| fold_init = bin_query_min_max_init; |
| fold_done = bin_query_duration_done; |
| break; |
| } |
| case GST_QUERY_POSITION: |
| { |
| fold_func = (GstIteratorFoldFunction) bin_query_position_fold; |
| fold_init = bin_query_min_max_init; |
| fold_done = bin_query_position_done; |
| break; |
| } |
| case GST_QUERY_LATENCY: |
| { |
| fold_func = (GstIteratorFoldFunction) bin_query_latency_fold; |
| fold_init = bin_query_min_max_init; |
| fold_done = bin_query_latency_done; |
| default_return = TRUE; |
| break; |
| } |
| default: |
| fold_func = (GstIteratorFoldFunction) bin_query_generic_fold; |
| break; |
| } |
| |
| fold_data.query = query; |
| |
| iter = gst_bin_iterate_sinks (bin); |
| GST_DEBUG_OBJECT (bin, "Sending query %p (type %s) to sink children", |
| query, GST_QUERY_TYPE_NAME (query)); |
| |
| if (fold_init) |
| fold_init (bin, &fold_data); |
| |
| res = |
| bin_iterate_fold (bin, iter, fold_init, fold_done, fold_func, &fold_data, |
| default_return); |
| gst_iterator_free (iter); |
| |
| if (!res) { |
| /* Query the source pads of the element */ |
| iter = gst_element_iterate_src_pads (element); |
| src_pads_query_result = |
| bin_iterate_fold (bin, iter, fold_init, fold_done, fold_func, |
| &fold_data, default_return); |
| gst_iterator_free (iter); |
| |
| if (src_pads_query_result) |
| res = TRUE; |
| } |
| |
| GST_DEBUG_OBJECT (bin, "query %p result %d", query, res); |
| |
| return res; |
| } |
| |
| static void |
| set_context (const GValue * item, gpointer user_data) |
| { |
| GstElement *element = g_value_get_object (item); |
| |
| gst_element_set_context (element, user_data); |
| } |
| |
| static void |
| gst_bin_set_context (GstElement * element, GstContext * context) |
| { |
| GstBin *bin; |
| GstIterator *children; |
| |
| g_return_if_fail (GST_IS_BIN (element)); |
| |
| bin = GST_BIN (element); |
| |
| GST_ELEMENT_CLASS (parent_class)->set_context (element, context); |
| |
| children = gst_bin_iterate_elements (bin); |
| while (gst_iterator_foreach (children, set_context, |
| context) == GST_ITERATOR_RESYNC) |
| gst_iterator_resync (children); |
| gst_iterator_free (children); |
| } |
| |
| static gint |
| compare_name (const GValue * velement, const gchar * name) |
| { |
| gint eq; |
| GstElement *element = g_value_get_object (velement); |
| |
| GST_OBJECT_LOCK (element); |
| eq = strcmp (GST_ELEMENT_NAME (element), name); |
| GST_OBJECT_UNLOCK (element); |
| |
| return eq; |
| } |
| |
| /** |
| * gst_bin_get_by_name: |
| * @bin: a #GstBin |
| * @name: the element name to search for |
| * |
| * Gets the element with the given name from a bin. This |
| * function recurses into child bins. |
| * |
| * Returns %NULL if no element with the given name is found in the bin. |
| * |
| * MT safe. Caller owns returned reference. |
| * |
| * Returns: (transfer full) (nullable): the #GstElement with the given |
| * name, or %NULL |
| */ |
| GstElement * |
| gst_bin_get_by_name (GstBin * bin, const gchar * name) |
| { |
| GstIterator *children; |
| GValue result = { 0, }; |
| GstElement *element; |
| gboolean found; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| |
| GST_CAT_INFO (GST_CAT_PARENTAGE, "[%s]: looking up child element %s", |
| GST_ELEMENT_NAME (bin), name); |
| |
| children = gst_bin_iterate_recurse (bin); |
| found = gst_iterator_find_custom (children, |
| (GCompareFunc) compare_name, &result, (gpointer) name); |
| gst_iterator_free (children); |
| |
| if (found) { |
| element = g_value_dup_object (&result); |
| g_value_unset (&result); |
| } else { |
| element = NULL; |
| } |
| |
| return element; |
| } |
| |
| /** |
| * gst_bin_get_by_name_recurse_up: |
| * @bin: a #GstBin |
| * @name: the element name to search for |
| * |
| * Gets the element with the given name from this bin. If the |
| * element is not found, a recursion is performed on the parent bin. |
| * |
| * Returns %NULL if: |
| * - no element with the given name is found in the bin |
| * |
| * MT safe. Caller owns returned reference. |
| * |
| * Returns: (transfer full) (nullable): the #GstElement with the given |
| * name, or %NULL |
| */ |
| GstElement * |
| gst_bin_get_by_name_recurse_up (GstBin * bin, const gchar * name) |
| { |
| GstElement *result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| g_return_val_if_fail (name != NULL, NULL); |
| |
| result = gst_bin_get_by_name (bin, name); |
| |
| if (!result) { |
| GstObject *parent; |
| |
| parent = gst_object_get_parent (GST_OBJECT_CAST (bin)); |
| if (parent) { |
| if (GST_IS_BIN (parent)) { |
| result = gst_bin_get_by_name_recurse_up (GST_BIN_CAST (parent), name); |
| } |
| gst_object_unref (parent); |
| } |
| } |
| |
| return result; |
| } |
| |
| static gint |
| compare_interface (const GValue * velement, GValue * interface) |
| { |
| GstElement *element = g_value_get_object (velement); |
| GType interface_type = (GType) g_value_get_pointer (interface); |
| gint ret; |
| |
| if (G_TYPE_CHECK_INSTANCE_TYPE (element, interface_type)) { |
| ret = 0; |
| } else { |
| ret = 1; |
| } |
| return ret; |
| } |
| |
| /** |
| * gst_bin_get_by_interface: |
| * @bin: a #GstBin |
| * @iface: the #GType of an interface |
| * |
| * Looks for an element inside the bin that implements the given |
| * interface. If such an element is found, it returns the element. |
| * You can cast this element to the given interface afterwards. If you want |
| * all elements that implement the interface, use |
| * gst_bin_iterate_all_by_interface(). This function recurses into child bins. |
| * |
| * MT safe. Caller owns returned reference. |
| * |
| * Returns: (transfer full) (nullable): A #GstElement inside the bin |
| * implementing the interface |
| */ |
| GstElement * |
| gst_bin_get_by_interface (GstBin * bin, GType iface) |
| { |
| GstIterator *children; |
| GValue result = { 0, }; |
| GstElement *element; |
| gboolean found; |
| GValue viface = { 0, }; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| g_return_val_if_fail (G_TYPE_IS_INTERFACE (iface), NULL); |
| |
| g_value_init (&viface, G_TYPE_POINTER); |
| g_value_set_pointer (&viface, (gpointer) iface); |
| |
| children = gst_bin_iterate_recurse (bin); |
| found = gst_iterator_find_custom (children, (GCompareFunc) compare_interface, |
| &result, &viface); |
| gst_iterator_free (children); |
| |
| if (found) { |
| element = g_value_dup_object (&result); |
| g_value_unset (&result); |
| } else { |
| element = NULL; |
| } |
| g_value_unset (&viface); |
| |
| return element; |
| } |
| |
| /** |
| * gst_bin_iterate_all_by_interface: |
| * @bin: a #GstBin |
| * @iface: the #GType of an interface |
| * |
| * Looks for all elements inside the bin that implements the given |
| * interface. You can safely cast all returned elements to the given interface. |
| * The function recurses inside child bins. The iterator will yield a series |
| * of #GstElement that should be unreffed after use. |
| * |
| * MT safe. Caller owns returned value. |
| * |
| * Returns: (transfer full) (nullable): a #GstIterator of #GstElement |
| * for all elements in the bin implementing the given interface, |
| * or %NULL |
| */ |
| GstIterator * |
| gst_bin_iterate_all_by_interface (GstBin * bin, GType iface) |
| { |
| GstIterator *children; |
| GstIterator *result; |
| GValue viface = { 0, }; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| g_return_val_if_fail (G_TYPE_IS_INTERFACE (iface), NULL); |
| |
| g_value_init (&viface, G_TYPE_POINTER); |
| g_value_set_pointer (&viface, (gpointer) iface); |
| |
| children = gst_bin_iterate_recurse (bin); |
| result = gst_iterator_filter (children, (GCompareFunc) compare_interface, |
| &viface); |
| |
| g_value_unset (&viface); |
| |
| return result; |
| } |