| /* GStreamer |
| * |
| * Copyright (C) 1999,2000 Erik Walthinsen <omega@cse.ogi.edu> |
| * 2004 Wim Taymans <wim@fluendo.com> |
| * |
| * gstbin.c: GstBin container object and support code |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Library General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Library General Public License for more details. |
| * |
| * You should have received a copy of the GNU Library General Public |
| * License along with this library; if not, write to the |
| * Free Software Foundation, Inc., 59 Temple Place - Suite 330, |
| * Boston, MA 02111-1307, USA. |
| * |
| * MT safe. |
| */ |
| |
| /** |
| * SECTION:gstbin |
| * @short_description: Base class and element that can contain other elements |
| * |
| * #GstBin is an element that can contain other #GstElement, allowing them to be |
| * managed as a group. |
| * Pads from the child elements can be ghosted to the bin, see #GstGhostPad. |
| * This makes the bin look like any other elements and enables creation of |
| * higher-level abstraction elements. |
| * |
| * A new #GstBin is created with gst_bin_new(). Use a #GstPipeline instead if you |
| * want to create a toplevel bin because a normal bin doesn't have a bus or |
| * handle clock distribution of its own. |
| * |
| * After the bin has been created you will typically add elements to it with |
| * gst_bin_add(). You can remove elements with gst_bin_remove(). |
| * |
| * An element can be retrieved from a bin with gst_bin_get_by_name(), using the |
| * elements name. gst_bin_get_by_name_recurse_up() is mainly used for internal |
| * purposes and will query the parent bins when the element is not found in the |
| * current bin. |
| * |
| * An iterator of elements in a bin can be retrieved with |
| * gst_bin_iterate_elements(). Various other iterators exist to retrieve the |
| * elements in a bin. |
| * |
| * gst_object_unref() is used to drop your reference to the bin. |
| * |
| * The <link linkend="GstBin-element-added">element-added</link> signal is |
| * fired whenever a new element is added to the bin. Likewise the <link |
| * linkend="GstBin-element-removed">element-removed</link> signal is fired |
| * whenever an element is removed from the bin. |
| * |
| * <refsect2><title>Notes</title> |
| * <para> |
| * A #GstBin internally intercepts every #GstMessage posted by its children and |
| * implements the following default behaviour for each of them: |
| * <variablelist> |
| * <varlistentry> |
| * <term>GST_MESSAGE_EOS</term> |
| * <listitem><para>This message is only posted by sinks in the PLAYING |
| * state. If all sinks posted the EOS message, this bin will post and EOS |
| * message upwards.</para></listitem> |
| * </varlistentry> |
| * <varlistentry> |
| * <term>GST_MESSAGE_SEGMENT_START</term> |
| * <listitem><para>just collected and never forwarded upwards. |
| * The messages are used to decide when all elements have completed playback |
| * of their segment.</para></listitem> |
| * </varlistentry> |
| * <varlistentry> |
| * <term>GST_MESSAGE_SEGMENT_DONE</term> |
| * <listitem><para> Is posted by #GstBin when all elements that posted |
| * a SEGMENT_START have posted a SEGMENT_DONE.</para></listitem> |
| * </varlistentry> |
| * <varlistentry> |
| * <term>GST_MESSAGE_DURATION</term> |
| * <listitem><para> Is posted by an element that detected a change |
| * in the stream duration. The default bin behaviour is to clear any |
| * cached duration values so that the next duration query will perform |
| * a full duration recalculation. The duration change is posted to the |
| * application so that it can refetch the new duration with a duration |
| * query. |
| * </para></listitem> |
| * </varlistentry> |
| * <varlistentry> |
| * <term>GST_MESSAGE_CLOCK_LOST</term> |
| * <listitem><para> This message is posted by an element when it |
| * can no longer provide a clock. The default bin behaviour is to |
| * check if the lost clock was the one provided by the bin. If so and |
| * the bin is currently in the PLAYING state, the message is forwarded to |
| * the bin parent. |
| * This message is also generated when a clock provider is removed from |
| * the bin. If this message is received by the application, it should |
| * PAUSE the pipeline and set it back to PLAYING to force a new clock |
| * distribution. |
| * </para></listitem> |
| * </varlistentry> |
| * <varlistentry> |
| * <term>GST_MESSAGE_CLOCK_PROVIDE</term> |
| * <listitem><para> This message is generated when an element |
| * can provide a clock. This mostly happens when a new clock |
| * provider is added to the bin. The default behaviour of the bin is to |
| * mark the currently selected clock as dirty, which will perform a clock |
| * recalculation the next time the bin is asked to provide a clock. |
| * This message is never sent tot the application but is forwarded to |
| * the parent of the bin. |
| * </para></listitem> |
| * </varlistentry> |
| * <varlistentry> |
| * <term>OTHERS</term> |
| * <listitem><para> posted upwards.</para></listitem> |
| * </varlistentry> |
| * </variablelist> |
| * |
| * |
| * A #GstBin implements the following default behaviour for answering to a |
| * #GstQuery: |
| * <variablelist> |
| * <varlistentry> |
| * <term>GST_QUERY_DURATION</term> |
| * <listitem><para>If the query has been asked before with the same format |
| * and the bin is a toplevel bin (ie. has no parent), |
| * use the cached previous value. If no previous value was cached, the |
| * query is sent to all sink elements in the bin and the MAXIMUM of all |
| * values is returned. If the bin is a toplevel bin the value is cached. |
| * If no sinks are available in the bin, the query fails. |
| * </para></listitem> |
| * </varlistentry> |
| * <varlistentry> |
| * <term>GST_QUERY_POSITION</term> |
| * <listitem><para>The query is sent to all sink elements in the bin and the |
| * MAXIMUM of all values is returned. If no sinks are available in the bin, |
| * the query fails. |
| * </para></listitem> |
| * </varlistentry> |
| * <varlistentry> |
| * <term>OTHERS</term> |
| * <listitem><para>the query is forwarded to all sink elements, the result |
| * of the first sink that answers the query successfully is returned. If no |
| * sink is in the bin, the query fails.</para></listitem> |
| * </varlistentry> |
| * </variablelist> |
| * |
| * A #GstBin will by default forward any event sent to it to all sink elements. |
| * If all the sinks return TRUE, the bin will also return TRUE, else FALSE is |
| * returned. If no sinks are in the bin, the event handler will return TRUE. |
| * |
| * </para> |
| * </refsect2> |
| * |
| * Last reviewed on 2006-04-28 (0.10.6) |
| */ |
| |
| #include "gst_private.h" |
| |
| #include "gstevent.h" |
| #include "gstbin.h" |
| #include "gstmarshal.h" |
| #include "gstxml.h" |
| #include "gstinfo.h" |
| #include "gsterror.h" |
| |
| #include "gstindex.h" |
| #include "gstindexfactory.h" |
| #include "gstutils.h" |
| #include "gstchildproxy.h" |
| |
| /* enable for DURATION caching. |
| * FIXME currently too many elements don't update |
| * their duration when it changes so we return inaccurate values. */ |
| #undef DURATION_CACHING |
| |
| GST_DEBUG_CATEGORY_STATIC (bin_debug); |
| #define GST_CAT_DEFAULT bin_debug |
| |
| static const GstElementDetails gst_bin_details = |
| GST_ELEMENT_DETAILS ("Generic bin", |
| "Generic/Bin", |
| "Simple container object", |
| "Erik Walthinsen <omega@cse.ogi.edu>," "Wim Taymans <wim@fluendo.com>"); |
| |
| static void gst_bin_dispose (GObject * object); |
| |
| static void gst_bin_recalc_state (GstBin * bin, gboolean force); |
| static GstStateChangeReturn gst_bin_change_state_func (GstElement * element, |
| GstStateChange transition); |
| static GstStateChangeReturn gst_bin_get_state_func (GstElement * element, |
| GstState * state, GstState * pending, GstClockTime timeout); |
| |
| static gboolean gst_bin_add_func (GstBin * bin, GstElement * element); |
| static gboolean gst_bin_remove_func (GstBin * bin, GstElement * element); |
| |
| #ifndef GST_DISABLE_INDEX |
| static void gst_bin_set_index_func (GstElement * element, GstIndex * index); |
| #endif |
| static GstClock *gst_bin_provide_clock_func (GstElement * element); |
| static gboolean gst_bin_set_clock_func (GstElement * element, GstClock * clock); |
| |
| static void gst_bin_handle_message_func (GstBin * bin, GstMessage * message); |
| static gboolean gst_bin_send_event (GstElement * element, GstEvent * event); |
| static GstBusSyncReply bin_bus_handler (GstBus * bus, |
| GstMessage * message, GstBin * bin); |
| static gboolean gst_bin_query (GstElement * element, GstQuery * query); |
| |
| #ifndef GST_DISABLE_LOADSAVE |
| static xmlNodePtr gst_bin_save_thyself (GstObject * object, xmlNodePtr parent); |
| static void gst_bin_restore_thyself (GstObject * object, xmlNodePtr self); |
| #endif |
| |
| static void bin_remove_messages (GstBin * bin, GstObject * src, |
| GstMessageType types); |
| static void gst_bin_recalc_func (GstBin * child, gpointer data); |
| static gint bin_element_is_sink (GstElement * child, GstBin * bin); |
| static gint bin_element_is_src (GstElement * child, GstBin * bin); |
| |
| static GstIterator *gst_bin_sort_iterator_new (GstBin * bin); |
| |
| /* Bin signals and properties */ |
| enum |
| { |
| ELEMENT_ADDED, |
| ELEMENT_REMOVED, |
| LAST_SIGNAL |
| }; |
| |
| enum |
| { |
| PROP_0 |
| /* FILL ME */ |
| }; |
| |
| static void gst_bin_base_init (gpointer g_class); |
| static void gst_bin_class_init (GstBinClass * klass); |
| static void gst_bin_init (GstBin * bin); |
| static void gst_bin_child_proxy_init (gpointer g_iface, gpointer iface_data); |
| |
| static GstElementClass *parent_class = NULL; |
| static guint gst_bin_signals[LAST_SIGNAL] = { 0 }; |
| |
| /** |
| * gst_bin_get_type: |
| * |
| * Returns: the type of #GstBin |
| */ |
| GType |
| gst_bin_get_type (void) |
| { |
| static GType gst_bin_type = 0; |
| |
| if (G_UNLIKELY (gst_bin_type == 0)) { |
| static const GTypeInfo bin_info = { |
| sizeof (GstBinClass), |
| gst_bin_base_init, |
| NULL, |
| (GClassInitFunc) gst_bin_class_init, |
| NULL, |
| NULL, |
| sizeof (GstBin), |
| 0, |
| (GInstanceInitFunc) gst_bin_init, |
| NULL |
| }; |
| static const GInterfaceInfo child_proxy_info = { |
| gst_bin_child_proxy_init, |
| NULL, |
| NULL |
| }; |
| |
| gst_bin_type = |
| g_type_register_static (GST_TYPE_ELEMENT, "GstBin", &bin_info, 0); |
| |
| g_type_add_interface_static (gst_bin_type, GST_TYPE_CHILD_PROXY, |
| &child_proxy_info); |
| |
| GST_DEBUG_CATEGORY_INIT (bin_debug, "bin", GST_DEBUG_BOLD, |
| "debugging info for the 'bin' container element"); |
| } |
| return gst_bin_type; |
| } |
| |
| static void |
| gst_bin_base_init (gpointer g_class) |
| { |
| GstElementClass *gstelement_class = GST_ELEMENT_CLASS (g_class); |
| |
| gst_element_class_set_details (gstelement_class, &gst_bin_details); |
| } |
| |
| static GstObject * |
| gst_bin_child_proxy_get_child_by_index (GstChildProxy * child_proxy, |
| guint index) |
| { |
| GstObject *res; |
| GstBin *bin; |
| |
| bin = GST_BIN_CAST (child_proxy); |
| |
| GST_OBJECT_LOCK (bin); |
| if ((res = g_list_nth_data (bin->children, index))) |
| gst_object_ref (res); |
| GST_OBJECT_UNLOCK (bin); |
| |
| return res; |
| } |
| |
| guint |
| gst_bin_child_proxy_get_children_count (GstChildProxy * child_proxy) |
| { |
| guint num; |
| GstBin *bin; |
| |
| bin = GST_BIN_CAST (child_proxy); |
| |
| GST_OBJECT_LOCK (bin); |
| num = bin->numchildren; |
| GST_OBJECT_UNLOCK (bin); |
| |
| return num; |
| } |
| |
| static void |
| gst_bin_child_proxy_init (gpointer g_iface, gpointer iface_data) |
| { |
| GstChildProxyInterface *iface = g_iface; |
| |
| iface->get_children_count = gst_bin_child_proxy_get_children_count; |
| iface->get_child_by_index = gst_bin_child_proxy_get_child_by_index; |
| } |
| |
| static void |
| gst_bin_class_init (GstBinClass * klass) |
| { |
| GObjectClass *gobject_class; |
| GstObjectClass *gstobject_class; |
| GstElementClass *gstelement_class; |
| GError *err; |
| |
| gobject_class = (GObjectClass *) klass; |
| gstobject_class = (GstObjectClass *) klass; |
| gstelement_class = (GstElementClass *) klass; |
| |
| parent_class = g_type_class_peek_parent (klass); |
| |
| /** |
| * GstBin::element-added: |
| * @bin: the #GstBin |
| * @element: the #GstElement that was added to the bin |
| * |
| * Will be emitted after the element was added to the bin. |
| */ |
| gst_bin_signals[ELEMENT_ADDED] = |
| g_signal_new ("element-added", G_TYPE_FROM_CLASS (klass), |
| G_SIGNAL_RUN_FIRST, G_STRUCT_OFFSET (GstBinClass, element_added), NULL, |
| NULL, gst_marshal_VOID__OBJECT, G_TYPE_NONE, 1, GST_TYPE_ELEMENT); |
| /** |
| * GstBin::element-removed: |
| * @bin: the #GstBin |
| * @element: the #GstElement that was removed from the bin |
| * |
| * Will be emitted after the element was removed from the bin. |
| */ |
| gst_bin_signals[ELEMENT_REMOVED] = |
| g_signal_new ("element-removed", G_TYPE_FROM_CLASS (klass), |
| G_SIGNAL_RUN_FIRST, G_STRUCT_OFFSET (GstBinClass, element_removed), NULL, |
| NULL, gst_marshal_VOID__OBJECT, G_TYPE_NONE, 1, GST_TYPE_ELEMENT); |
| |
| gobject_class->dispose = GST_DEBUG_FUNCPTR (gst_bin_dispose); |
| |
| #ifndef GST_DISABLE_LOADSAVE |
| gstobject_class->save_thyself = GST_DEBUG_FUNCPTR (gst_bin_save_thyself); |
| gstobject_class->restore_thyself = |
| GST_DEBUG_FUNCPTR (gst_bin_restore_thyself); |
| #endif |
| |
| gstelement_class->change_state = |
| GST_DEBUG_FUNCPTR (gst_bin_change_state_func); |
| gstelement_class->get_state = GST_DEBUG_FUNCPTR (gst_bin_get_state_func); |
| #ifndef GST_DISABLE_INDEX |
| gstelement_class->set_index = GST_DEBUG_FUNCPTR (gst_bin_set_index_func); |
| #endif |
| gstelement_class->provide_clock = |
| GST_DEBUG_FUNCPTR (gst_bin_provide_clock_func); |
| gstelement_class->set_clock = GST_DEBUG_FUNCPTR (gst_bin_set_clock_func); |
| |
| gstelement_class->send_event = GST_DEBUG_FUNCPTR (gst_bin_send_event); |
| gstelement_class->query = GST_DEBUG_FUNCPTR (gst_bin_query); |
| |
| klass->add_element = GST_DEBUG_FUNCPTR (gst_bin_add_func); |
| klass->remove_element = GST_DEBUG_FUNCPTR (gst_bin_remove_func); |
| klass->handle_message = GST_DEBUG_FUNCPTR (gst_bin_handle_message_func); |
| |
| GST_DEBUG ("creating bin thread pool"); |
| err = NULL; |
| klass->pool = |
| g_thread_pool_new ((GFunc) gst_bin_recalc_func, NULL, -1, FALSE, &err); |
| if (err != NULL) { |
| g_critical ("could alloc threadpool %s", err->message); |
| } |
| } |
| |
| static void |
| gst_bin_init (GstBin * bin) |
| { |
| GstBus *bus; |
| |
| bin->numchildren = 0; |
| bin->children = NULL; |
| bin->children_cookie = 0; |
| bin->messages = NULL; |
| bin->polling = FALSE; |
| bin->state_dirty = FALSE; |
| bin->provided_clock = NULL; |
| bin->clock_dirty = FALSE; |
| |
| /* Set up a bus for listening to child elements */ |
| bus = gst_bus_new (); |
| bin->child_bus = bus; |
| GST_DEBUG_OBJECT (bin, "using bus %" GST_PTR_FORMAT " to listen to children", |
| bus); |
| gst_bus_set_sync_handler (bus, (GstBusSyncHandler) bin_bus_handler, bin); |
| } |
| |
| static void |
| gst_bin_dispose (GObject * object) |
| { |
| GstBin *bin = GST_BIN (object); |
| GstBus **child_bus_p = &bin->child_bus; |
| GstClock **provided_clock_p = &bin->provided_clock; |
| GstElement **clock_provider_p = &bin->clock_provider; |
| |
| GST_CAT_DEBUG_OBJECT (GST_CAT_REFCOUNTING, object, "dispose"); |
| |
| bin_remove_messages (bin, NULL, GST_MESSAGE_ANY); |
| |
| gst_object_replace ((GstObject **) child_bus_p, NULL); |
| gst_object_replace ((GstObject **) provided_clock_p, NULL); |
| gst_object_replace ((GstObject **) clock_provider_p, NULL); |
| |
| while (bin->children) { |
| gst_bin_remove (bin, GST_ELEMENT_CAST (bin->children->data)); |
| } |
| if (G_UNLIKELY (bin->children != NULL)) { |
| g_critical ("could not remove elements from bin %s", |
| GST_STR_NULL (GST_OBJECT_NAME (object))); |
| } |
| |
| G_OBJECT_CLASS (parent_class)->dispose (object); |
| } |
| |
| /** |
| * gst_bin_new: |
| * @name: the name of the new bin |
| * |
| * Creates a new bin with the given name. |
| * |
| * Returns: a new #GstBin |
| */ |
| GstElement * |
| gst_bin_new (const gchar * name) |
| { |
| return gst_element_factory_make ("bin", name); |
| } |
| |
| /* set the index on all elements in this bin |
| * |
| * MT safe |
| */ |
| #ifndef GST_DISABLE_INDEX |
| static void |
| gst_bin_set_index_func (GstElement * element, GstIndex * index) |
| { |
| GstBin *bin; |
| GList *children; |
| |
| bin = GST_BIN (element); |
| |
| GST_OBJECT_LOCK (bin); |
| for (children = bin->children; children; children = g_list_next (children)) { |
| GstElement *child = GST_ELEMENT (children->data); |
| |
| gst_element_set_index (child, index); |
| } |
| GST_OBJECT_UNLOCK (bin); |
| } |
| #endif |
| |
| /* set the clock on all elements in this bin |
| * |
| * MT safe |
| */ |
| static gboolean |
| gst_bin_set_clock_func (GstElement * element, GstClock * clock) |
| { |
| GList *children; |
| GstBin *bin; |
| gboolean res = TRUE; |
| |
| bin = GST_BIN (element); |
| |
| GST_OBJECT_LOCK (bin); |
| if (element->clock != clock) { |
| for (children = bin->children; children; children = g_list_next (children)) { |
| GstElement *child = GST_ELEMENT (children->data); |
| |
| res &= gst_element_set_clock (child, clock); |
| } |
| } |
| GST_OBJECT_UNLOCK (bin); |
| |
| return res; |
| } |
| |
| /* get the clock for this bin by asking all of the children in this bin |
| * |
| * The ref of the returned clock in increased so unref after usage. |
| * |
| * We loop the elements in state order and pick the last clock we can |
| * get. This makes sure we get a clock from the source. |
| * |
| * MT safe |
| */ |
| static GstClock * |
| gst_bin_provide_clock_func (GstElement * element) |
| { |
| GstClock *result = NULL; |
| GstElement *provider = NULL; |
| GstBin *bin; |
| GstIterator *it; |
| gpointer val; |
| GstClock **provided_clock_p; |
| GstElement **clock_provider_p; |
| |
| bin = GST_BIN (element); |
| |
| GST_OBJECT_LOCK (bin); |
| if (!bin->clock_dirty) |
| goto not_dirty; |
| |
| GST_DEBUG_OBJECT (bin, "finding new clock"); |
| |
| it = gst_bin_sort_iterator_new (bin); |
| |
| while (it->next (it, &val) == GST_ITERATOR_OK) { |
| GstElement *child = GST_ELEMENT_CAST (val); |
| GstClock *clock; |
| |
| clock = gst_element_provide_clock (child); |
| if (clock) { |
| GST_DEBUG_OBJECT (bin, "found candidate clock %p by element %s", |
| clock, GST_ELEMENT_NAME (child)); |
| if (result) { |
| gst_object_unref (result); |
| gst_object_unref (provider); |
| } |
| result = clock; |
| provider = child; |
| } else { |
| gst_object_unref (child); |
| } |
| } |
| |
| provided_clock_p = &bin->provided_clock; |
| clock_provider_p = &bin->clock_provider; |
| gst_object_replace ((GstObject **) provided_clock_p, (GstObject *) result); |
| gst_object_replace ((GstObject **) clock_provider_p, (GstObject *) provider); |
| bin->clock_dirty = FALSE; |
| GST_DEBUG_OBJECT (bin, |
| "provided new clock %" GST_PTR_FORMAT " by provider %" GST_PTR_FORMAT, |
| result, provider); |
| /* Provider is not being returned to caller, just the result */ |
| if (provider) |
| gst_object_unref (provider); |
| GST_OBJECT_UNLOCK (bin); |
| |
| gst_iterator_free (it); |
| |
| return result; |
| |
| not_dirty: |
| { |
| if ((result = bin->provided_clock)) |
| gst_object_ref (result); |
| GST_DEBUG_OBJECT (bin, "returning old clock %p", result); |
| GST_OBJECT_UNLOCK (bin); |
| |
| return result; |
| } |
| } |
| |
| /* |
| * functions for manipulating cached messages |
| */ |
| typedef struct |
| { |
| GstObject *src; |
| GstMessageType types; |
| } MessageFind; |
| |
| /* check if a message is of given src and type */ |
| static gint |
| message_check (GstMessage * message, MessageFind * target) |
| { |
| gboolean eq = TRUE; |
| |
| if (target->src) |
| eq &= GST_MESSAGE_SRC (message) == target->src; |
| if (target->types) |
| eq &= (GST_MESSAGE_TYPE (message) & target->types) != 0; |
| |
| return (eq ? 0 : 1); |
| } |
| |
| /* with LOCK, returns TRUE if message had a valid SRC, takes ref on |
| * the message. |
| * |
| * A message that is cached and has the same SRC and type is replaced |
| * by the given message. |
| */ |
| static gboolean |
| bin_replace_message (GstBin * bin, GstMessage * message, GstMessageType types) |
| { |
| GList *previous; |
| GstObject *src; |
| gboolean res = TRUE; |
| const gchar *name; |
| |
| name = GST_MESSAGE_TYPE_NAME (message); |
| |
| if ((src = GST_MESSAGE_SRC (message))) { |
| MessageFind find; |
| |
| find.src = src; |
| find.types = types; |
| |
| /* first find the previous message posted by this element */ |
| previous = g_list_find_custom (bin->messages, &find, |
| (GCompareFunc) message_check); |
| if (previous) { |
| /* if we found a previous message, replace it */ |
| gst_message_unref (previous->data); |
| previous->data = message; |
| |
| GST_DEBUG_OBJECT (bin, "replace old message %s from %s", |
| name, GST_ELEMENT_NAME (src)); |
| } else { |
| /* keep new message */ |
| bin->messages = g_list_prepend (bin->messages, message); |
| |
| GST_DEBUG_OBJECT (bin, "got new message %p, %s from %s", |
| message, name, GST_ELEMENT_NAME (src)); |
| } |
| } else { |
| GST_DEBUG_OBJECT (bin, "got message %s from (NULL), not processing", name); |
| res = FALSE; |
| gst_message_unref (message); |
| } |
| return res; |
| } |
| |
| /* with LOCK. Remove all messages of given types */ |
| static void |
| bin_remove_messages (GstBin * bin, GstObject * src, GstMessageType types) |
| { |
| MessageFind find; |
| GList *walk, *next; |
| |
| find.src = src; |
| find.types = types; |
| |
| for (walk = bin->messages; walk; walk = next) { |
| GstMessage *message = (GstMessage *) walk->data; |
| |
| next = g_list_next (walk); |
| |
| if (message_check (message, &find) == 0) { |
| GST_DEBUG_OBJECT (GST_MESSAGE_SRC (message), |
| "deleting message of types %d", types); |
| bin->messages = g_list_delete_link (bin->messages, walk); |
| gst_message_unref (message); |
| } else { |
| GST_DEBUG_OBJECT (GST_MESSAGE_SRC (message), |
| "not deleting message of type %d", GST_MESSAGE_TYPE (message)); |
| } |
| } |
| } |
| |
| |
| /* Check if the bin is EOS. We do this by scanning all sinks and |
| * checking if they posted an EOS message. |
| * |
| * call with bin LOCK */ |
| static gboolean |
| is_eos (GstBin * bin) |
| { |
| gboolean result; |
| GList *walk; |
| |
| result = TRUE; |
| for (walk = bin->children; walk; walk = g_list_next (walk)) { |
| GstElement *element; |
| |
| element = GST_ELEMENT_CAST (walk->data); |
| if (bin_element_is_sink (element, bin) == 0) { |
| MessageFind find; |
| |
| /* check if element posted EOS */ |
| find.src = GST_OBJECT_CAST (element); |
| find.types = GST_MESSAGE_EOS; |
| |
| if (g_list_find_custom (bin->messages, &find, |
| (GCompareFunc) message_check)) { |
| GST_DEBUG ("element posted EOS"); |
| } else { |
| GST_DEBUG ("element did not post EOS yet"); |
| result = FALSE; |
| break; |
| } |
| } |
| } |
| return result; |
| } |
| |
| static void |
| unlink_pads (GstPad * pad) |
| { |
| GstPad *peer; |
| |
| if ((peer = gst_pad_get_peer (pad))) { |
| if (gst_pad_get_direction (pad) == GST_PAD_SRC) |
| gst_pad_unlink (pad, peer); |
| else |
| gst_pad_unlink (peer, pad); |
| gst_object_unref (peer); |
| } |
| gst_object_unref (pad); |
| } |
| |
| /* vmethod that adds an element to a bin |
| * |
| * MT safe |
| */ |
| static gboolean |
| gst_bin_add_func (GstBin * bin, GstElement * element) |
| { |
| gchar *elem_name; |
| GstIterator *it; |
| gboolean is_sink; |
| GstMessage *clock_message = NULL; |
| |
| /* we obviously can't add ourself to ourself */ |
| if (G_UNLIKELY (GST_ELEMENT_CAST (element) == GST_ELEMENT_CAST (bin))) |
| goto adding_itself; |
| |
| /* get the element name to make sure it is unique in this bin. */ |
| GST_OBJECT_LOCK (element); |
| elem_name = g_strdup (GST_ELEMENT_NAME (element)); |
| is_sink = GST_OBJECT_FLAG_IS_SET (element, GST_ELEMENT_IS_SINK); |
| GST_OBJECT_UNLOCK (element); |
| |
| GST_OBJECT_LOCK (bin); |
| |
| /* then check to see if the element's name is already taken in the bin, |
| * we can safely take the lock here. This check is probably bogus because |
| * you can safely change the element name after this check and before setting |
| * the object parent. The window is very small though... */ |
| if (G_UNLIKELY (!gst_object_check_uniqueness (bin->children, elem_name))) |
| goto duplicate_name; |
| |
| /* set the element's parent and add the element to the bin's list of children */ |
| if (G_UNLIKELY (!gst_object_set_parent (GST_OBJECT_CAST (element), |
| GST_OBJECT_CAST (bin)))) |
| goto had_parent; |
| |
| /* if we add a sink we become a sink */ |
| if (is_sink) { |
| GST_CAT_DEBUG_OBJECT (GST_CAT_PARENTAGE, bin, "element \"%s\" was sink", |
| elem_name); |
| GST_OBJECT_FLAG_SET (bin, GST_ELEMENT_IS_SINK); |
| } |
| if (gst_element_provides_clock (element)) { |
| GST_DEBUG_OBJECT (bin, "element \"%s\" can provide a clock", elem_name); |
| bin->clock_dirty = TRUE; |
| clock_message = |
| gst_message_new_clock_provide (GST_OBJECT_CAST (bin), NULL, TRUE); |
| } |
| |
| bin->children = g_list_prepend (bin->children, element); |
| bin->numchildren++; |
| bin->children_cookie++; |
| |
| /* distribute the bus */ |
| gst_element_set_bus (element, bin->child_bus); |
| |
| /* propagate the current base_time and clock */ |
| gst_element_set_base_time (element, GST_ELEMENT (bin)->base_time); |
| /* it's possible that the element did not accept the clock but |
| * that is not important right now. When the pipeline goes to PLAYING, |
| * a new clock will be selected */ |
| gst_element_set_clock (element, GST_ELEMENT_CLOCK (bin)); |
| bin->state_dirty = TRUE; |
| GST_OBJECT_UNLOCK (bin); |
| |
| if (clock_message) { |
| gst_element_post_message (GST_ELEMENT_CAST (bin), clock_message); |
| } |
| |
| /* unlink all linked pads */ |
| it = gst_element_iterate_pads (element); |
| gst_iterator_foreach (it, (GFunc) unlink_pads, element); |
| gst_iterator_free (it); |
| |
| GST_CAT_DEBUG_OBJECT (GST_CAT_PARENTAGE, bin, "added element \"%s\"", |
| elem_name); |
| g_free (elem_name); |
| |
| g_signal_emit (G_OBJECT (bin), gst_bin_signals[ELEMENT_ADDED], 0, element); |
| |
| return TRUE; |
| |
| /* ERROR handling here */ |
| adding_itself: |
| { |
| GST_OBJECT_LOCK (bin); |
| g_warning ("Cannot add bin %s to itself", GST_ELEMENT_NAME (bin)); |
| GST_OBJECT_UNLOCK (bin); |
| return FALSE; |
| } |
| duplicate_name: |
| { |
| g_warning ("Name %s is not unique in bin %s, not adding", |
| elem_name, GST_ELEMENT_NAME (bin)); |
| GST_OBJECT_UNLOCK (bin); |
| g_free (elem_name); |
| return FALSE; |
| } |
| had_parent: |
| { |
| g_warning ("Element %s already has parent", elem_name); |
| GST_OBJECT_UNLOCK (bin); |
| g_free (elem_name); |
| return FALSE; |
| } |
| } |
| |
| |
| /** |
| * gst_bin_add: |
| * @bin: a #GstBin |
| * @element: the #GstElement to add |
| * |
| * Adds the given element to the bin. Sets the element's parent, and thus |
| * takes ownership of the element. An element can only be added to one bin. |
| * |
| * If the element's pads are linked to other pads, the pads will be unlinked |
| * before the element is added to the bin. |
| * |
| * MT safe. |
| * |
| * Returns: TRUE if the element could be added, FALSE if |
| * the bin does not want to accept the element. |
| */ |
| gboolean |
| gst_bin_add (GstBin * bin, GstElement * element) |
| { |
| GstBinClass *bclass; |
| gboolean result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), FALSE); |
| g_return_val_if_fail (GST_IS_ELEMENT (element), FALSE); |
| |
| bclass = GST_BIN_GET_CLASS (bin); |
| |
| if (G_UNLIKELY (bclass->add_element == NULL)) |
| goto no_function; |
| |
| GST_CAT_DEBUG (GST_CAT_PARENTAGE, "adding element %s to bin %s", |
| GST_ELEMENT_NAME (element), GST_ELEMENT_NAME (bin)); |
| |
| result = bclass->add_element (bin, element); |
| |
| return result; |
| |
| /* ERROR handling */ |
| no_function: |
| { |
| g_warning ("adding elements to bin %s is not supported", |
| GST_ELEMENT_NAME (bin)); |
| return FALSE; |
| } |
| } |
| |
| /* remove an element from the bin |
| * |
| * MT safe |
| */ |
| static gboolean |
| gst_bin_remove_func (GstBin * bin, GstElement * element) |
| { |
| gchar *elem_name; |
| GstIterator *it; |
| gboolean is_sink; |
| GstMessage *clock_message = NULL; |
| |
| GST_OBJECT_LOCK (element); |
| /* Check if the element is already being removed and immediately |
| * return */ |
| if (G_UNLIKELY (GST_OBJECT_FLAG_IS_SET (element, GST_ELEMENT_UNPARENTING))) |
| goto already_removing; |
| |
| GST_OBJECT_FLAG_SET (element, GST_ELEMENT_UNPARENTING); |
| /* grab element name so we can print it */ |
| elem_name = g_strdup (GST_ELEMENT_NAME (element)); |
| is_sink = GST_OBJECT_FLAG_IS_SET (element, GST_ELEMENT_IS_SINK); |
| GST_OBJECT_UNLOCK (element); |
| |
| /* unlink all linked pads */ |
| it = gst_element_iterate_pads (element); |
| gst_iterator_foreach (it, (GFunc) unlink_pads, element); |
| gst_iterator_free (it); |
| |
| GST_OBJECT_LOCK (bin); |
| /* the element must be in the bin's list of children */ |
| if (G_UNLIKELY (g_list_find (bin->children, element) == NULL)) |
| goto not_in_bin; |
| |
| /* now remove the element from the list of elements */ |
| bin->children = g_list_remove (bin->children, element); |
| bin->numchildren--; |
| bin->children_cookie++; |
| |
| /* check if we removed a sink */ |
| if (is_sink) { |
| GList *other_sink; |
| |
| /* check if we removed the last sink */ |
| other_sink = g_list_find_custom (bin->children, |
| bin, (GCompareFunc) bin_element_is_sink); |
| if (!other_sink) { |
| /* yups, we're not a sink anymore */ |
| GST_OBJECT_FLAG_UNSET (bin, GST_ELEMENT_IS_SINK); |
| } |
| } |
| |
| /* if the clock provider for this element is removed, we lost |
| * the clock as well, we need to inform the parent of this |
| * so that it can select a new clock */ |
| if (bin->clock_provider == element) { |
| GST_DEBUG_OBJECT (bin, "element \"%s\" provided the clock", elem_name); |
| bin->clock_dirty = TRUE; |
| clock_message = |
| gst_message_new_clock_lost (GST_OBJECT_CAST (bin), bin->provided_clock); |
| } |
| |
| bin->state_dirty = TRUE; |
| GST_OBJECT_UNLOCK (bin); |
| |
| if (clock_message) { |
| gst_element_post_message (GST_ELEMENT_CAST (bin), clock_message); |
| } |
| |
| GST_CAT_INFO_OBJECT (GST_CAT_PARENTAGE, bin, "removed child \"%s\"", |
| elem_name); |
| g_free (elem_name); |
| |
| gst_element_set_bus (element, NULL); |
| |
| /* Clear the clock we provided to the element */ |
| gst_element_set_clock (element, NULL); |
| |
| /* we ref here because after the _unparent() the element can be disposed |
| * and we still need it to reset the UNPARENTING flag and fire a signal. */ |
| gst_object_ref (element); |
| gst_object_unparent (GST_OBJECT_CAST (element)); |
| |
| GST_OBJECT_LOCK (element); |
| GST_OBJECT_FLAG_UNSET (element, GST_ELEMENT_UNPARENTING); |
| GST_OBJECT_UNLOCK (element); |
| |
| g_signal_emit (G_OBJECT (bin), gst_bin_signals[ELEMENT_REMOVED], 0, element); |
| |
| /* element is really out of our control now */ |
| gst_object_unref (element); |
| |
| return TRUE; |
| |
| /* ERROR handling */ |
| not_in_bin: |
| { |
| g_warning ("Element %s is not in bin %s", elem_name, |
| GST_ELEMENT_NAME (bin)); |
| GST_OBJECT_UNLOCK (bin); |
| g_free (elem_name); |
| return FALSE; |
| } |
| already_removing: |
| { |
| GST_OBJECT_UNLOCK (element); |
| return FALSE; |
| } |
| } |
| |
| /** |
| * gst_bin_remove: |
| * @bin: a #GstBin |
| * @element: the #GstElement to remove |
| * |
| * Removes the element from the bin, unparenting it as well. |
| * Unparenting the element means that the element will be dereferenced, |
| * so if the bin holds the only reference to the element, the element |
| * will be freed in the process of removing it from the bin. If you |
| * want the element to still exist after removing, you need to call |
| * gst_object_ref() before removing it from the bin. |
| * |
| * If the element's pads are linked to other pads, the pads will be unlinked |
| * before the element is removed from the bin. |
| * |
| * MT safe. |
| * |
| * Returns: TRUE if the element could be removed, FALSE if |
| * the bin does not want to remove the element. |
| */ |
| gboolean |
| gst_bin_remove (GstBin * bin, GstElement * element) |
| { |
| GstBinClass *bclass; |
| gboolean result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), FALSE); |
| g_return_val_if_fail (GST_IS_ELEMENT (element), FALSE); |
| |
| bclass = GST_BIN_GET_CLASS (bin); |
| |
| if (G_UNLIKELY (bclass->remove_element == NULL)) |
| goto no_function; |
| |
| GST_CAT_DEBUG (GST_CAT_PARENTAGE, "removing element %s from bin %s", |
| GST_ELEMENT_NAME (element), GST_ELEMENT_NAME (bin)); |
| |
| result = bclass->remove_element (bin, element); |
| |
| return result; |
| |
| /* ERROR handling */ |
| no_function: |
| { |
| g_warning ("removing elements from bin %s is not supported", |
| GST_ELEMENT_NAME (bin)); |
| return FALSE; |
| } |
| } |
| |
| static GstIteratorItem |
| iterate_child (GstIterator * it, GstElement * child) |
| { |
| gst_object_ref (child); |
| return GST_ITERATOR_ITEM_PASS; |
| } |
| |
| /** |
| * gst_bin_iterate_elements: |
| * @bin: a #GstBin |
| * |
| * Gets an iterator for the elements in this bin. |
| * |
| * Each element yielded by the iterator will have its refcount increased, so |
| * unref after use. |
| * |
| * MT safe. Caller owns returned value. |
| * |
| * Returns: a #GstIterator of #GstElement, or NULL |
| */ |
| GstIterator * |
| gst_bin_iterate_elements (GstBin * bin) |
| { |
| GstIterator *result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| |
| GST_OBJECT_LOCK (bin); |
| /* add ref because the iterator refs the bin. When the iterator |
| * is freed it will unref the bin again using the provided dispose |
| * function. */ |
| gst_object_ref (bin); |
| result = gst_iterator_new_list (GST_TYPE_ELEMENT, |
| GST_OBJECT_GET_LOCK (bin), |
| &bin->children_cookie, |
| &bin->children, |
| bin, |
| (GstIteratorItemFunction) iterate_child, |
| (GstIteratorDisposeFunction) gst_object_unref); |
| GST_OBJECT_UNLOCK (bin); |
| |
| return result; |
| } |
| |
| static GstIteratorItem |
| iterate_child_recurse (GstIterator * it, GstElement * child) |
| { |
| gst_object_ref (child); |
| if (GST_IS_BIN (child)) { |
| GstIterator *other = gst_bin_iterate_recurse (GST_BIN (child)); |
| |
| gst_iterator_push (it, other); |
| } |
| return GST_ITERATOR_ITEM_PASS; |
| } |
| |
| /** |
| * gst_bin_iterate_recurse: |
| * @bin: a #GstBin |
| * |
| * Gets an iterator for the elements in this bin. |
| * This iterator recurses into GstBin children. |
| * |
| * Each element yielded by the iterator will have its refcount increased, so |
| * unref after use. |
| * |
| * MT safe. Caller owns returned value. |
| * |
| * Returns: a #GstIterator of #GstElement, or NULL |
| */ |
| GstIterator * |
| gst_bin_iterate_recurse (GstBin * bin) |
| { |
| GstIterator *result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| |
| GST_OBJECT_LOCK (bin); |
| /* add ref because the iterator refs the bin. When the iterator |
| * is freed it will unref the bin again using the provided dispose |
| * function. */ |
| gst_object_ref (bin); |
| result = gst_iterator_new_list (GST_TYPE_ELEMENT, |
| GST_OBJECT_GET_LOCK (bin), |
| &bin->children_cookie, |
| &bin->children, |
| bin, |
| (GstIteratorItemFunction) iterate_child_recurse, |
| (GstIteratorDisposeFunction) gst_object_unref); |
| GST_OBJECT_UNLOCK (bin); |
| |
| return result; |
| } |
| |
| /* returns 0 when TRUE because this is a GCompareFunc */ |
| /* MT safe */ |
| static gint |
| bin_element_is_sink (GstElement * child, GstBin * bin) |
| { |
| gboolean is_sink; |
| |
| /* we lock the child here for the remainder of the function to |
| * get its name and flag safely. */ |
| GST_OBJECT_LOCK (child); |
| is_sink = GST_OBJECT_FLAG_IS_SET (child, GST_ELEMENT_IS_SINK); |
| |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, bin, |
| "child %s %s sink", GST_OBJECT_NAME (child), is_sink ? "is" : "is not"); |
| |
| GST_OBJECT_UNLOCK (child); |
| return is_sink ? 0 : 1; |
| } |
| |
| static gint |
| sink_iterator_filter (GstElement * child, GstBin * bin) |
| { |
| if (bin_element_is_sink (child, bin) == 0) { |
| /* returns 0 because this is a GCompareFunc */ |
| return 0; |
| } else { |
| /* child carries a ref from gst_bin_iterate_elements -- drop if not passing |
| through */ |
| gst_object_unref (child); |
| return 1; |
| } |
| } |
| |
| /** |
| * gst_bin_iterate_sinks: |
| * @bin: a #GstBin |
| * |
| * Gets an iterator for all elements in the bin that have the |
| * #GST_ELEMENT_IS_SINK flag set. |
| * |
| * Each element yielded by the iterator will have its refcount increased, so |
| * unref after use. |
| * |
| * MT safe. Caller owns returned value. |
| * |
| * Returns: a #GstIterator of #GstElement, or NULL |
| */ |
| GstIterator * |
| gst_bin_iterate_sinks (GstBin * bin) |
| { |
| GstIterator *children; |
| GstIterator *result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| |
| children = gst_bin_iterate_elements (bin); |
| result = gst_iterator_filter (children, |
| (GCompareFunc) sink_iterator_filter, bin); |
| |
| return result; |
| } |
| |
| /* returns 0 when TRUE because this is a GCompareFunc */ |
| /* MT safe */ |
| static gint |
| bin_element_is_src (GstElement * child, GstBin * bin) |
| { |
| gboolean is_src = FALSE; |
| |
| /* we lock the child here for the remainder of the function to |
| * get its name and flag safely. */ |
| GST_OBJECT_LOCK (child); |
| if (!GST_OBJECT_FLAG_IS_SET (child, GST_ELEMENT_IS_SINK) && |
| !child->numsinkpads) { |
| is_src = TRUE; |
| } |
| |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, bin, |
| "child %s %s src", GST_OBJECT_NAME (child), is_src ? "is" : "is not"); |
| |
| GST_OBJECT_UNLOCK (child); |
| return is_src ? 0 : 1; |
| } |
| |
| static gint |
| src_iterator_filter (GstElement * child, GstBin * bin) |
| { |
| if (bin_element_is_src (child, bin) == 0) { |
| /* returns 0 because this is a GCompareFunc */ |
| return 0; |
| } else { |
| /* child carries a ref from gst_bin_iterate_elements -- drop if not passing |
| through */ |
| gst_object_unref (child); |
| return 1; |
| } |
| } |
| |
| /** |
| * gst_bin_iterate_sources: |
| * @bin: a #GstBin |
| * |
| * Gets an iterator for all elements in the bin that have no sinkpads and have |
| * the #GST_ELEMENT_IS_SINK flag unset. |
| * |
| * Each element yielded by the iterator will have its refcount increased, so |
| * unref after use. |
| * |
| * MT safe. Caller owns returned value. |
| * |
| * Returns: a #GstIterator of #GstElement, or NULL |
| */ |
| GstIterator * |
| gst_bin_iterate_sources (GstBin * bin) |
| { |
| GstIterator *children; |
| GstIterator *result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| |
| children = gst_bin_iterate_elements (bin); |
| result = gst_iterator_filter (children, |
| (GCompareFunc) src_iterator_filter, bin); |
| |
| return result; |
| } |
| |
| /* |
| * MT safe |
| */ |
| static GstStateChangeReturn |
| gst_bin_get_state_func (GstElement * element, GstState * state, |
| GstState * pending, GstClockTime timeout) |
| { |
| GstBin *bin = GST_BIN (element); |
| GstStateChangeReturn ret; |
| |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, bin, "getting state"); |
| |
| /* do a non forced recalculation of the state */ |
| gst_bin_recalc_state (bin, FALSE); |
| |
| ret = parent_class->get_state (element, state, pending, timeout); |
| |
| return ret; |
| } |
| |
| static void |
| gst_bin_recalc_state (GstBin * bin, gboolean force) |
| { |
| GstStateChangeReturn ret; |
| GList *children; |
| guint32 children_cookie; |
| guint32 state_cookie; |
| gboolean have_no_preroll; |
| gboolean have_async; |
| |
| ret = GST_STATE_CHANGE_SUCCESS; |
| |
| /* lock bin, no element can be added or removed while we have this lock */ |
| GST_OBJECT_LOCK (bin); |
| /* forced recalc, make state dirty again */ |
| if (force) |
| bin->state_dirty = TRUE; |
| |
| /* no point in scanning if nothing changed and it's no forced recalc */ |
| if (!bin->state_dirty) |
| goto not_dirty; |
| |
| /* no point in having two scans run concurrently */ |
| if (bin->polling) |
| goto was_polling; |
| |
| bin->polling = TRUE; |
| state_cookie = GST_ELEMENT_CAST (bin)->state_cookie; |
| |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, bin, "recalc state"); |
| |
| restart: |
| /* when we leave this function, the state must not be dirty, whenever |
| * we are scanning and the state becomes dirty again, we restart. */ |
| bin->state_dirty = FALSE; |
| |
| have_no_preroll = FALSE; |
| have_async = FALSE; |
| |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, bin, "checking element states"); |
| |
| /* scan all element states with a zero timeout so we don't block on |
| * anything */ |
| children = bin->children; |
| children_cookie = bin->children_cookie; |
| while (children) { |
| GstElement *child = GST_ELEMENT_CAST (children->data); |
| |
| gst_object_ref (child); |
| /* now we release the lock to enter a non blocking wait. We |
| * release the lock anyway since we can. */ |
| GST_OBJECT_UNLOCK (bin); |
| |
| ret = gst_element_get_state (child, NULL, NULL, 0); |
| |
| gst_object_unref (child); |
| |
| /* now grab the lock to iterate to the next child */ |
| GST_OBJECT_LOCK (bin); |
| if (G_UNLIKELY (children_cookie != bin->children_cookie)) { |
| /* child added/removed during state change, restart. We need |
| * to restart with the quick check as a no-preroll element could |
| * have been added here and we don't want to block on sinks then.*/ |
| GST_DEBUG_OBJECT (bin, "children added or removed, restarting recalc"); |
| goto restart; |
| } |
| if (state_cookie != GST_ELEMENT_CAST (bin)->state_cookie) { |
| GST_DEBUG_OBJECT (bin, "concurrent state change"); |
| goto concurrent_state; |
| } |
| if (bin->state_dirty) { |
| GST_DEBUG_OBJECT (bin, "state dirty again, restarting recalc"); |
| goto restart; |
| } |
| |
| switch (ret) { |
| case GST_STATE_CHANGE_FAILURE: |
| /* report FAILURE immediatly */ |
| goto done; |
| case GST_STATE_CHANGE_NO_PREROLL: |
| /* we have to continue scanning as there might be |
| * ERRORS too */ |
| have_no_preroll = TRUE; |
| break; |
| case GST_STATE_CHANGE_ASYNC: |
| /* we have to continue scanning as there might be |
| * ERRORS too */ |
| have_async = TRUE; |
| break; |
| default: |
| break; |
| } |
| children = g_list_next (children); |
| } |
| /* if we get here, we have no FAILURES */ |
| |
| /* if we have NO_PREROLL, return that */ |
| if (have_no_preroll) { |
| ret = GST_STATE_CHANGE_NO_PREROLL; |
| } |
| /* else return ASYNC if async elements where found. */ |
| else if (have_async) { |
| ret = GST_STATE_CHANGE_ASYNC; |
| } |
| |
| done: |
| bin->polling = FALSE; |
| GST_OBJECT_UNLOCK (bin); |
| |
| /* now we can take the state lock, it is possible that new elements |
| * are added now and we still report the old state. No problem though as |
| * the return is still consistent, the effect is as if the element was |
| * added after this function completed. */ |
| switch (ret) { |
| case GST_STATE_CHANGE_SUCCESS: |
| case GST_STATE_CHANGE_NO_PREROLL: |
| ret = gst_element_continue_state (GST_ELEMENT_CAST (bin), ret); |
| break; |
| case GST_STATE_CHANGE_ASYNC: |
| gst_element_lost_state (GST_ELEMENT_CAST (bin)); |
| break; |
| case GST_STATE_CHANGE_FAILURE: |
| gst_element_abort_state (GST_ELEMENT_CAST (bin)); |
| break; |
| default: |
| goto unknown_state; |
| } |
| |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, bin, "bin RETURN is now %s", |
| gst_element_state_change_return_get_name (ret)); |
| |
| return; |
| |
| not_dirty: |
| { |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, bin, "not dirty"); |
| GST_OBJECT_UNLOCK (bin); |
| return; |
| } |
| was_polling: |
| { |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, bin, "was polling"); |
| GST_OBJECT_UNLOCK (bin); |
| return; |
| } |
| concurrent_state: |
| { |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, bin, "concurrent_state"); |
| bin->polling = FALSE; |
| GST_OBJECT_UNLOCK (bin); |
| return; |
| } |
| unknown_state: |
| { |
| /* somebody added a GST_STATE_ and forgot to do stuff here ! */ |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, bin, |
| "unknown return value %d from a state change function", ret); |
| g_critical ("unknown return value %d from a state change function", ret); |
| GST_STATE_RETURN (bin) = GST_STATE_CHANGE_FAILURE; |
| GST_STATE_UNLOCK (bin); |
| return; |
| } |
| } |
| |
| /*********************************************** |
| * Topologically sorted iterator |
| * see http://en.wikipedia.org/wiki/Topological_sorting |
| * |
| * For each element in the graph, an entry is kept in a HashTable |
| * with its number of srcpad connections (degree). |
| * We then change state of all elements without dependencies |
| * (degree 0) and decrement the degree of all elements connected |
| * on the sinkpads. When an element reaches degree 0, its state is |
| * changed next. |
| * When all elements are handled the algorithm stops. |
| */ |
| typedef struct _GstBinSortIterator |
| { |
| GstIterator it; |
| GQueue *queue; /* elements queued for state change */ |
| GstBin *bin; /* bin we iterate */ |
| gint mode; /* adding or removing dependency */ |
| GstElement *best; /* next element with least dependencies */ |
| gint best_deg; /* best degree */ |
| GHashTable *hash; /* hashtable with element dependencies */ |
| } GstBinSortIterator; |
| |
| /* we add and subtract 1 to make sure we don't confuse NULL and 0 */ |
| #define HASH_SET_DEGREE(bit, elem, deg) \ |
| g_hash_table_replace (bit->hash, elem, GINT_TO_POINTER(deg+1)) |
| #define HASH_GET_DEGREE(bit, elem) \ |
| (GPOINTER_TO_INT(g_hash_table_lookup (bit->hash, elem))-1) |
| |
| /* add element to queue of next elements in the iterator. |
| * We push at the tail to give higher priority elements a |
| * chance first */ |
| static void |
| add_to_queue (GstBinSortIterator * bit, GstElement * element) |
| { |
| GST_DEBUG_OBJECT (bit->bin, "%s add to queue", GST_ELEMENT_NAME (element)); |
| gst_object_ref (element); |
| g_queue_push_tail (bit->queue, element); |
| HASH_SET_DEGREE (bit, element, -1); |
| } |
| |
| /* clear the queue, unref all objects as we took a ref when |
| * we added them to the queue */ |
| static void |
| clear_queue (GQueue * queue) |
| { |
| gpointer p; |
| |
| while ((p = g_queue_pop_head (queue))) |
| gst_object_unref (p); |
| } |
| |
| /* set all degrees to 0. Elements marked as a sink are |
| * added to the queue immediatly. */ |
| static void |
| reset_degree (GstElement * element, GstBinSortIterator * bit) |
| { |
| gboolean is_sink; |
| |
| /* sinks are added right away */ |
| GST_OBJECT_LOCK (element); |
| is_sink = GST_OBJECT_FLAG_IS_SET (element, GST_ELEMENT_IS_SINK); |
| GST_OBJECT_UNLOCK (element); |
| |
| if (is_sink) { |
| add_to_queue (bit, element); |
| } else { |
| /* others are marked with 0 and handled when sinks are done */ |
| HASH_SET_DEGREE (bit, element, 0); |
| } |
| } |
| |
| /* adjust the degree of all elements connected to the given |
| * element. If an degree of an element drops to 0, it is |
| * added to the queue of elements to schedule next. |
| * |
| * We have to make sure not to cross the bin boundary this element |
| * belongs to. |
| */ |
| static void |
| update_degree (GstElement * element, GstBinSortIterator * bit) |
| { |
| gboolean linked = FALSE; |
| |
| GST_OBJECT_LOCK (element); |
| /* don't touch degree if element has no sourcepads */ |
| if (element->numsinkpads != 0) { |
| /* loop over all sinkpads, decrement degree for all connected |
| * elements in this bin */ |
| GList *pads; |
| |
| for (pads = element->sinkpads; pads; pads = g_list_next (pads)) { |
| GstPad *peer; |
| |
| if ((peer = gst_pad_get_peer (GST_PAD_CAST (pads->data)))) { |
| GstElement *peer_element; |
| |
| if ((peer_element = gst_pad_get_parent_element (peer))) { |
| GST_OBJECT_LOCK (peer_element); |
| /* check that we don't go outside of this bin */ |
| if (GST_OBJECT_CAST (peer_element)->parent == |
| GST_OBJECT_CAST (bit->bin)) { |
| gint old_deg, new_deg; |
| |
| old_deg = HASH_GET_DEGREE (bit, peer_element); |
| new_deg = old_deg + bit->mode; |
| |
| GST_DEBUG_OBJECT (bit->bin, |
| "change element %s, degree %d->%d, linked to %s", |
| GST_ELEMENT_NAME (peer_element), old_deg, new_deg, |
| GST_ELEMENT_NAME (element)); |
| |
| /* update degree */ |
| if (new_deg == 0) { |
| /* degree hit 0, add to queue */ |
| add_to_queue (bit, peer_element); |
| } else { |
| HASH_SET_DEGREE (bit, peer_element, new_deg); |
| } |
| linked = TRUE; |
| } |
| GST_OBJECT_UNLOCK (peer_element); |
| gst_object_unref (peer_element); |
| } |
| gst_object_unref (peer); |
| } |
| } |
| } |
| if (!linked) { |
| GST_DEBUG_OBJECT (bit->bin, "element %s not linked on any sinkpads", |
| GST_ELEMENT_NAME (element)); |
| } |
| GST_OBJECT_UNLOCK (element); |
| } |
| |
| /* find the next best element not handled yet. This is the one |
| * with the lowest non-negative degree */ |
| static void |
| find_element (GstElement * element, GstBinSortIterator * bit) |
| { |
| gint degree; |
| |
| /* element is already handled */ |
| if ((degree = HASH_GET_DEGREE (bit, element)) < 0) |
| return; |
| |
| /* first element or element with smaller degree */ |
| if (bit->best == NULL || bit->best_deg > degree) { |
| bit->best = element; |
| bit->best_deg = degree; |
| } |
| } |
| |
| /* get next element in iterator. the returned element has the |
| * refcount increased */ |
| static GstIteratorResult |
| gst_bin_sort_iterator_next (GstBinSortIterator * bit, gpointer * result) |
| { |
| GstBin *bin = bit->bin; |
| |
| /* empty queue, we have to find a next best element */ |
| if (g_queue_is_empty (bit->queue)) { |
| GstElement *best; |
| |
| bit->best = NULL; |
| bit->best_deg = G_MAXINT; |
| g_list_foreach (bin->children, (GFunc) find_element, bit); |
| if ((best = bit->best)) { |
| if (bit->best_deg != 0) { |
| /* we don't fail on this one yet */ |
| g_warning ("loop detected in the graph !!"); |
| } |
| /* best unhandled element, schedule as next element */ |
| GST_DEBUG_OBJECT (bin, "queue empty, next best: %s", |
| GST_ELEMENT_NAME (best)); |
| gst_object_ref (best); |
| HASH_SET_DEGREE (bit, best, -1); |
| *result = best; |
| } else { |
| GST_DEBUG_OBJECT (bin, "queue empty, elements exhausted"); |
| /* no more unhandled elements, we are done */ |
| return GST_ITERATOR_DONE; |
| } |
| } else { |
| /* everything added to the queue got reffed */ |
| *result = g_queue_pop_head (bit->queue); |
| } |
| |
| GST_DEBUG_OBJECT (bin, "queue head gives %s", GST_ELEMENT_NAME (*result)); |
| /* update degrees of linked elements */ |
| update_degree (GST_ELEMENT_CAST (*result), bit); |
| |
| return GST_ITERATOR_OK; |
| } |
| |
| /* clear queues, recalculate the degrees and restart. */ |
| static void |
| gst_bin_sort_iterator_resync (GstBinSortIterator * bit) |
| { |
| GstBin *bin = bit->bin; |
| |
| GST_DEBUG_OBJECT (bin, "resync"); |
| clear_queue (bit->queue); |
| /* reset degrees */ |
| g_list_foreach (bin->children, (GFunc) reset_degree, bit); |
| /* calc degrees, incrementing */ |
| bit->mode = 1; |
| g_list_foreach (bin->children, (GFunc) update_degree, bit); |
| /* for the rest of the function we decrement the degrees */ |
| bit->mode = -1; |
| } |
| |
| /* clear queues, unref bin and free iterator. */ |
| static void |
| gst_bin_sort_iterator_free (GstBinSortIterator * bit) |
| { |
| GstBin *bin = bit->bin; |
| |
| GST_DEBUG_OBJECT (bin, "free"); |
| clear_queue (bit->queue); |
| g_queue_free (bit->queue); |
| g_hash_table_destroy (bit->hash); |
| gst_object_unref (bin); |
| g_free (bit); |
| } |
| |
| /* should be called with the bin LOCK held */ |
| static GstIterator * |
| gst_bin_sort_iterator_new (GstBin * bin) |
| { |
| GstBinSortIterator *result; |
| |
| /* we don't need an ItemFunction because we ref the items in the _next |
| * method already */ |
| result = (GstBinSortIterator *) |
| gst_iterator_new (sizeof (GstBinSortIterator), |
| GST_TYPE_ELEMENT, |
| GST_OBJECT_GET_LOCK (bin), |
| &bin->children_cookie, |
| (GstIteratorNextFunction) gst_bin_sort_iterator_next, |
| (GstIteratorItemFunction) NULL, |
| (GstIteratorResyncFunction) gst_bin_sort_iterator_resync, |
| (GstIteratorFreeFunction) gst_bin_sort_iterator_free); |
| result->queue = g_queue_new (); |
| result->hash = g_hash_table_new (NULL, NULL); |
| gst_object_ref (bin); |
| result->bin = bin; |
| gst_bin_sort_iterator_resync (result); |
| |
| return (GstIterator *) result; |
| } |
| |
| /** |
| * gst_bin_iterate_sorted: |
| * @bin: a #GstBin |
| * |
| * Gets an iterator for the elements in this bin in topologically |
| * sorted order. This means that the elements are returned from |
| * the most downstream elements (sinks) to the sources. |
| * |
| * This function is used internally to perform the state changes |
| * of the bin elements. |
| * |
| * Each element yielded by the iterator will have its refcount increased, so |
| * unref after use. |
| * |
| * MT safe. Caller owns returned value. |
| * |
| * Returns: a #GstIterator of #GstElement, or NULL |
| */ |
| GstIterator * |
| gst_bin_iterate_sorted (GstBin * bin) |
| { |
| GstIterator *result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| |
| GST_OBJECT_LOCK (bin); |
| result = gst_bin_sort_iterator_new (bin); |
| GST_OBJECT_UNLOCK (bin); |
| |
| return result; |
| } |
| |
| static GstStateChangeReturn |
| gst_bin_element_set_state (GstBin * bin, GstElement * element, GstState pending) |
| { |
| GstStateChangeReturn ret; |
| gboolean locked; |
| |
| /* peel off the locked flag */ |
| GST_OBJECT_LOCK (element); |
| locked = GST_OBJECT_FLAG_IS_SET (element, GST_ELEMENT_LOCKED_STATE); |
| GST_OBJECT_UNLOCK (element); |
| |
| /* skip locked elements */ |
| if (G_UNLIKELY (locked)) { |
| GST_DEBUG_OBJECT (element, |
| "element is locked, pretending state change succeeded"); |
| ret = GST_STATE_CHANGE_SUCCESS; |
| goto done; |
| } |
| |
| /* change state */ |
| ret = gst_element_set_state (element, pending); |
| |
| done: |
| return ret; |
| } |
| |
| /* gst_iterator_fold functions for pads_activate |
| * Note how we don't stop the iterator when we fail an activation. This is |
| * probably a FIXME since when one pad activation fails, we don't want to |
| * continue our state change. */ |
| static gboolean |
| activate_pads (GstPad * pad, GValue * ret, gboolean * active) |
| { |
| if (!gst_pad_set_active (pad, *active)) |
| g_value_set_boolean (ret, FALSE); |
| else if (!*active) |
| gst_pad_set_caps (pad, NULL); |
| |
| /* unref the object that was reffed for us by _fold */ |
| gst_object_unref (pad); |
| return TRUE; |
| } |
| |
| /* returns false on error or early cutout (will never happen because the fold |
| * function always returns TRUE, see FIXME above) of the fold, true if all |
| * pads in @iter were (de)activated successfully. */ |
| static gboolean |
| iterator_activate_fold_with_resync (GstIterator * iter, gpointer user_data) |
| { |
| GstIteratorResult ires; |
| GValue ret = { 0 }; |
| |
| /* no need to unset this later, it's just a boolean */ |
| g_value_init (&ret, G_TYPE_BOOLEAN); |
| g_value_set_boolean (&ret, TRUE); |
| |
| while (1) { |
| ires = gst_iterator_fold (iter, (GstIteratorFoldFunction) activate_pads, |
| &ret, user_data); |
| switch (ires) { |
| case GST_ITERATOR_RESYNC: |
| /* need to reset the result again */ |
| g_value_set_boolean (&ret, TRUE); |
| gst_iterator_resync (iter); |
| break; |
| case GST_ITERATOR_DONE: |
| /* all pads iterated, return collected value */ |
| goto done; |
| default: |
| /* iterator returned _ERROR or premature end with _OK, |
| * mark an error and exit */ |
| g_value_set_boolean (&ret, FALSE); |
| goto done; |
| } |
| } |
| done: |
| /* return collected value */ |
| return g_value_get_boolean (&ret); |
| } |
| |
| /* is called with STATE_LOCK |
| */ |
| static gboolean |
| gst_bin_src_pads_activate (GstBin * bin, gboolean active) |
| { |
| GstIterator *iter; |
| gboolean fold_ok; |
| |
| GST_DEBUG_OBJECT (bin, "src_pads_activate with active %d", active); |
| |
| iter = gst_element_iterate_src_pads ((GstElement *) bin); |
| fold_ok = iterator_activate_fold_with_resync (iter, &active); |
| gst_iterator_free (iter); |
| if (G_UNLIKELY (!fold_ok)) |
| goto failed; |
| |
| GST_DEBUG_OBJECT (bin, "pads_activate successful"); |
| |
| return TRUE; |
| |
| /* ERRORS */ |
| failed: |
| { |
| GST_DEBUG_OBJECT (bin, "source pads_activate failed"); |
| return FALSE; |
| } |
| } |
| static GstStateChangeReturn |
| gst_bin_change_state_func (GstElement * element, GstStateChange transition) |
| { |
| GstBin *bin; |
| GstStateChangeReturn ret; |
| GstState current, next; |
| gboolean have_async; |
| gboolean have_no_preroll; |
| GstClockTime base_time; |
| GstIterator *it; |
| gboolean done; |
| |
| /* we don't need to take the STATE_LOCK, it is already taken */ |
| current = (GstState) GST_STATE_TRANSITION_CURRENT (transition); |
| next = (GstState) GST_STATE_TRANSITION_NEXT (transition); |
| |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, element, |
| "changing state of children from %s to %s", |
| gst_element_state_get_name (current), gst_element_state_get_name (next)); |
| |
| bin = GST_BIN_CAST (element); |
| |
| switch (next) { |
| case GST_STATE_PAUSED: |
| /* Clear EOS list on next PAUSED */ |
| GST_OBJECT_LOCK (bin); |
| GST_DEBUG_OBJECT (element, "clearing EOS elements"); |
| bin_remove_messages (bin, NULL, GST_MESSAGE_EOS); |
| GST_OBJECT_UNLOCK (bin); |
| if (current == GST_STATE_READY) |
| if (!(gst_bin_src_pads_activate (bin, TRUE))) |
| goto activate_failure; |
| break; |
| case GST_STATE_READY: |
| /* Clear message list on next READY */ |
| GST_OBJECT_LOCK (bin); |
| GST_DEBUG_OBJECT (element, "clearing all cached messages"); |
| bin_remove_messages (bin, NULL, GST_MESSAGE_ANY); |
| GST_OBJECT_UNLOCK (bin); |
| if (current == GST_STATE_PAUSED) |
| if (!(gst_bin_src_pads_activate (bin, FALSE))) |
| goto activate_failure; |
| break; |
| case GST_STATE_NULL: |
| if (current == GST_STATE_READY) |
| if (!(gst_bin_src_pads_activate (bin, FALSE))) |
| goto activate_failure; |
| break; |
| default: |
| break; |
| } |
| |
| /* iterate in state change order */ |
| it = gst_bin_iterate_sorted (bin); |
| |
| restart: |
| /* take base_time */ |
| base_time = gst_element_get_base_time (element); |
| |
| have_async = FALSE; |
| have_no_preroll = FALSE; |
| |
| done = FALSE; |
| while (!done) { |
| gpointer data; |
| |
| switch (gst_iterator_next (it, &data)) { |
| case GST_ITERATOR_OK: |
| { |
| GstElement *child; |
| |
| child = GST_ELEMENT_CAST (data); |
| |
| /* set base_time on child */ |
| gst_element_set_base_time (child, base_time); |
| |
| /* set state now */ |
| ret = gst_bin_element_set_state (bin, child, next); |
| |
| switch (ret) { |
| case GST_STATE_CHANGE_SUCCESS: |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, element, |
| "child '%s' changed state to %d(%s) successfully", |
| GST_ELEMENT_NAME (child), next, |
| gst_element_state_get_name (next)); |
| break; |
| case GST_STATE_CHANGE_ASYNC: |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, element, |
| "child '%s' is changing state asynchronously to %s", |
| GST_ELEMENT_NAME (child), gst_element_state_get_name (next)); |
| have_async = TRUE; |
| break; |
| case GST_STATE_CHANGE_FAILURE: |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, element, |
| "child '%s' failed to go to state %d(%s)", |
| GST_ELEMENT_NAME (child), |
| next, gst_element_state_get_name (next)); |
| gst_object_unref (child); |
| goto done; |
| case GST_STATE_CHANGE_NO_PREROLL: |
| GST_CAT_INFO_OBJECT (GST_CAT_STATES, element, |
| "child '%s' changed state to %d(%s) successfully without preroll", |
| GST_ELEMENT_NAME (child), next, |
| gst_element_state_get_name (next)); |
| have_no_preroll = TRUE; |
| break; |
| default: |
| g_assert_not_reached (); |
| break; |
| } |
| gst_object_unref (child); |
| break; |
| } |
| case GST_ITERATOR_RESYNC: |
| GST_CAT_DEBUG (GST_CAT_STATES, "iterator doing resync"); |
| gst_iterator_resync (it); |
| goto restart; |
| default: |
| case GST_ITERATOR_DONE: |
| GST_CAT_DEBUG (GST_CAT_STATES, "iterator done"); |
| done = TRUE; |
| break; |
| } |
| } |
| |
| ret = parent_class->change_state (element, transition); |
| if (G_UNLIKELY (ret == GST_STATE_CHANGE_FAILURE)) |
| goto done; |
| |
| if (have_no_preroll) { |
| ret = GST_STATE_CHANGE_NO_PREROLL; |
| } else if (have_async) { |
| ret = GST_STATE_CHANGE_ASYNC; |
| } |
| |
| done: |
| gst_iterator_free (it); |
| |
| GST_CAT_DEBUG_OBJECT (GST_CAT_STATES, element, |
| "done changing bin's state from %s to %s, now in %s, ret %d", |
| gst_element_state_get_name (current), |
| gst_element_state_get_name (next), |
| gst_element_state_get_name (GST_STATE (element)), ret); |
| |
| return ret; |
| |
| /* ERRORS */ |
| activate_failure: |
| { |
| GST_CAT_WARNING_OBJECT (GST_CAT_STATES, element, |
| "failure (de)activating src pads"); |
| return GST_STATE_CHANGE_FAILURE; |
| } |
| } |
| |
| /* |
| * This function is a utility event handler for seek events. |
| * It will send the event to all sinks or sources depending on the |
| * event-direction. |
| * |
| * Applications are free to override this behaviour and |
| * implement their own seek handler, but this will work for |
| * pretty much all cases in practice. |
| */ |
| static gboolean |
| gst_bin_send_event (GstElement * element, GstEvent * event) |
| { |
| GstBin *bin = GST_BIN (element); |
| GstIterator *iter; |
| gboolean res = TRUE; |
| gboolean done = FALSE; |
| |
| if (GST_EVENT_IS_DOWNSTREAM (event)) { |
| iter = gst_bin_iterate_sources (bin); |
| GST_DEBUG_OBJECT (bin, "Sending %s event to src children", |
| GST_EVENT_TYPE_NAME (event)); |
| } else { |
| iter = gst_bin_iterate_sinks (bin); |
| GST_DEBUG_OBJECT (bin, "Sending %s event to sink children", |
| GST_EVENT_TYPE_NAME (event)); |
| } |
| |
| while (!done) { |
| gpointer data; |
| |
| switch (gst_iterator_next (iter, &data)) { |
| case GST_ITERATOR_OK: |
| { |
| GstElement *child; |
| |
| gst_event_ref (event); |
| child = GST_ELEMENT_CAST (data); |
| res &= gst_element_send_event (child, event); |
| gst_object_unref (child); |
| break; |
| } |
| case GST_ITERATOR_RESYNC: |
| gst_iterator_resync (iter); |
| res = TRUE; |
| break; |
| case GST_ITERATOR_DONE: |
| done = TRUE; |
| break; |
| case GST_ITERATOR_ERROR: |
| g_assert_not_reached (); |
| break; |
| } |
| } |
| gst_iterator_free (iter); |
| gst_event_unref (event); |
| |
| return res; |
| } |
| |
| static void |
| gst_bin_recalc_func (GstBin * bin, gpointer data) |
| { |
| GST_DEBUG_OBJECT (bin, "doing state recalc"); |
| GST_STATE_LOCK (bin); |
| gst_bin_recalc_state (bin, FALSE); |
| GST_STATE_UNLOCK (bin); |
| GST_DEBUG_OBJECT (bin, "state recalc done"); |
| gst_object_unref (bin); |
| } |
| |
| static GstBusSyncReply |
| bin_bus_handler (GstBus * bus, GstMessage * message, GstBin * bin) |
| { |
| |
| GstBinClass *bclass; |
| |
| bclass = GST_BIN_GET_CLASS (bin); |
| if (bclass->handle_message) |
| bclass->handle_message (bin, message); |
| else |
| gst_message_unref (message); |
| |
| return GST_BUS_DROP; |
| } |
| |
| /* handle child messages: |
| * |
| * This method is called synchronously when a child posts a message on |
| * the internal bus. |
| * |
| * GST_MESSAGE_EOS: This message is only posted by sinks |
| * in the PLAYING state. If all sinks posted the EOS message, post |
| * one upwards. |
| * |
| * GST_MESSAGE_STATE_DIRTY: if we are the toplevel bin we do a state |
| * recalc. If we are not toplevel (we have a parent) we just post |
| * the message upwards. This makes sure only the toplevel bin will |
| * run over all its children to check if a state change happened. |
| * |
| * GST_MESSAGE_SEGMENT_START: just collect, never forward upwards. If an |
| * element posts segment_start twice, only the last message is kept. |
| * |
| * GST_MESSAGE_SEGMENT_DONE: replace SEGMENT_START message from same poster |
| * with the segment_done message. If there are no more segment_start |
| * messages, post segment_done message upwards. |
| * |
| * GST_MESSAGE_DURATION: remove all previously cached duration messages. |
| * Whenever someone performs a duration query on the bin, we store the |
| * result so we can answer it quicker the next time. Any element that |
| * changes its duration marks our cached values invalid. |
| * This message is also posted upwards. This is currently disabled |
| * because too many elements don't post DURATION messages when the |
| * duration changes. |
| * |
| * GST_MESSAGE_CLOCK_LOST: This message is posted by an element when it |
| * can no longer provide a clock. The default bin behaviour is to |
| * check if the lost clock was the one provided by the bin. If so and |
| * we are currently in the PLAYING state, we forward the message to |
| * our parent. |
| * This message is also generated when we remove a clock provider from |
| * a bin. If this message is received by the application, it should |
| * PAUSE the pipeline and set it back to PLAYING to force a new clock |
| * and a new base_time distribution. |
| * |
| * GST_MESSAGE_CLOCK_PROVIDE: This message is generated when an element |
| * can provide a clock. This mostly happens when we add a new clock |
| * provider to the bin. The default behaviour of the bin is to mark the |
| * currently selected clock as dirty, which will perform a clock |
| * recalculation the next time we are asked to provide a clock. |
| * This message is never sent to the application but is forwarded to |
| * the parent. |
| * |
| * OTHER: post upwards. |
| */ |
| static void |
| gst_bin_handle_message_func (GstBin * bin, GstMessage * message) |
| { |
| GST_DEBUG_OBJECT (bin, "[msg %p] handling child message of type %s", |
| message, GST_MESSAGE_TYPE_NAME (message)); |
| |
| switch (GST_MESSAGE_TYPE (message)) { |
| case GST_MESSAGE_EOS: |
| { |
| gboolean eos; |
| |
| /* collect all eos messages from the children */ |
| GST_OBJECT_LOCK (bin); |
| bin_replace_message (bin, message, GST_MESSAGE_EOS); |
| eos = is_eos (bin); |
| GST_OBJECT_UNLOCK (bin); |
| |
| /* if we are completely EOS, we forward an EOS message */ |
| if (eos) { |
| GST_DEBUG_OBJECT (bin, "all sinks posted EOS"); |
| gst_element_post_message (GST_ELEMENT_CAST (bin), |
| gst_message_new_eos (GST_OBJECT_CAST (bin))); |
| } |
| break; |
| } |
| case GST_MESSAGE_STATE_DIRTY: |
| { |
| GstObject *src; |
| GstBinClass *klass; |
| |
| src = GST_MESSAGE_SRC (message); |
| |
| GST_DEBUG_OBJECT (bin, "%s gave state dirty", GST_ELEMENT_NAME (src)); |
| |
| /* mark the bin dirty */ |
| GST_OBJECT_LOCK (bin); |
| GST_DEBUG_OBJECT (bin, "marking dirty"); |
| bin->state_dirty = TRUE; |
| |
| if (GST_OBJECT_PARENT (bin)) |
| goto not_toplevel; |
| |
| /* free message */ |
| gst_message_unref (message); |
| |
| klass = GST_BIN_GET_CLASS (bin); |
| if (!bin->polling) { |
| GST_DEBUG_OBJECT (bin, "pushing recalc on thread pool"); |
| gst_object_ref (bin); |
| g_thread_pool_push (klass->pool, bin, NULL); |
| } else { |
| GST_DEBUG_OBJECT (bin, |
| "state recalc already in progress, not pushing new recalc"); |
| } |
| GST_OBJECT_UNLOCK (bin); |
| break; |
| |
| /* non toplevel bins just forward the message and don't start |
| * a recalc themselves */ |
| not_toplevel: |
| { |
| GST_OBJECT_UNLOCK (bin); |
| GST_DEBUG_OBJECT (bin, "not toplevel, forwarding"); |
| goto forward; |
| } |
| } |
| case GST_MESSAGE_SEGMENT_START: |
| GST_OBJECT_LOCK (bin); |
| /* replace any previous segment_start message from this source |
| * with the new segment start message */ |
| bin_replace_message (bin, message, GST_MESSAGE_SEGMENT_START); |
| GST_OBJECT_UNLOCK (bin); |
| break; |
| case GST_MESSAGE_SEGMENT_DONE: |
| { |
| MessageFind find; |
| gboolean post = FALSE; |
| GstFormat format; |
| gint64 position; |
| |
| gst_message_parse_segment_done (message, &format, &position); |
| |
| GST_OBJECT_LOCK (bin); |
| bin_replace_message (bin, message, GST_MESSAGE_SEGMENT_START); |
| /* if there are no more segment_start messages, everybody posted |
| * a segment_done and we can post one on the bus. */ |
| |
| /* we don't care who still has a pending segment start */ |
| find.src = NULL; |
| find.types = GST_MESSAGE_SEGMENT_START; |
| |
| if (!g_list_find_custom (bin->messages, &find, |
| (GCompareFunc) message_check)) { |
| /* nothing found */ |
| post = TRUE; |
| /* remove all old segment_done messages */ |
| bin_remove_messages (bin, NULL, GST_MESSAGE_SEGMENT_DONE); |
| } |
| GST_OBJECT_UNLOCK (bin); |
| if (post) { |
| /* post segment done with latest format and position. */ |
| gst_element_post_message (GST_ELEMENT_CAST (bin), |
| gst_message_new_segment_done (GST_OBJECT_CAST (bin), |
| format, position)); |
| } |
| break; |
| } |
| case GST_MESSAGE_DURATION: |
| { |
| /* remove all cached duration messages, next time somebody asks |
| * for duration, we will recalculate. */ |
| GST_OBJECT_LOCK (bin); |
| bin_remove_messages (bin, NULL, GST_MESSAGE_DURATION); |
| GST_OBJECT_UNLOCK (bin); |
| goto forward; |
| } |
| case GST_MESSAGE_CLOCK_LOST: |
| { |
| GstClock **provided_clock_p; |
| GstElement **clock_provider_p; |
| gboolean playing, provided, forward; |
| GstClock *clock; |
| |
| gst_message_parse_clock_lost (message, &clock); |
| |
| GST_OBJECT_LOCK (bin); |
| bin->clock_dirty = TRUE; |
| /* if we lost the clock that we provided, post to parent but |
| * only if we are PLAYING. */ |
| provided = (clock == bin->provided_clock); |
| playing = (GST_STATE (bin) == GST_STATE_PLAYING); |
| forward = playing & provided; |
| if (provided) { |
| GST_DEBUG_OBJECT (bin, |
| "Lost clock %" GST_PTR_FORMAT " provided by %" GST_PTR_FORMAT, |
| bin->provided_clock, bin->clock_provider); |
| provided_clock_p = &bin->provided_clock; |
| clock_provider_p = &bin->clock_provider; |
| gst_object_replace ((GstObject **) provided_clock_p, NULL); |
| gst_object_replace ((GstObject **) clock_provider_p, NULL); |
| } |
| GST_DEBUG_OBJECT (bin, "provided %d, playing %d, forward %d", |
| provided, playing, forward); |
| GST_OBJECT_UNLOCK (bin); |
| |
| if (forward) |
| goto forward; |
| |
| /* free message */ |
| gst_message_unref (message); |
| break; |
| } |
| case GST_MESSAGE_CLOCK_PROVIDE: |
| { |
| gboolean forward; |
| |
| GST_OBJECT_LOCK (bin); |
| bin->clock_dirty = TRUE; |
| /* a new clock is available, post to parent but not |
| * to the application */ |
| forward = GST_OBJECT_PARENT (bin) != NULL; |
| GST_OBJECT_UNLOCK (bin); |
| |
| if (forward) |
| goto forward; |
| |
| /* free message */ |
| gst_message_unref (message); |
| break; |
| } |
| default: |
| goto forward; |
| } |
| return; |
| |
| forward: |
| { |
| /* Send all other messages upward */ |
| GST_DEBUG_OBJECT (bin, "posting message upward"); |
| gst_element_post_message (GST_ELEMENT_CAST (bin), message); |
| return; |
| } |
| } |
| |
| /* generic struct passed to all query fold methods */ |
| typedef struct |
| { |
| GstQuery *query; |
| gint64 min; |
| gint64 max; |
| gboolean live; |
| } QueryFold; |
| |
| typedef void (*QueryInitFunction) (GstBin * bin, QueryFold * fold); |
| typedef void (*QueryDoneFunction) (GstBin * bin, QueryFold * fold); |
| |
| /* for duration/position we collect all durations/positions and take |
| * the MAX of all valid results */ |
| static void |
| bin_query_min_max_init (GstBin * bin, QueryFold * fold) |
| { |
| fold->min = 0; |
| fold->max = -1; |
| fold->live = FALSE; |
| } |
| |
| static gboolean |
| bin_query_duration_fold (GstElement * item, GValue * ret, QueryFold * fold) |
| { |
| if (gst_element_query (item, fold->query)) { |
| gint64 duration; |
| |
| g_value_set_boolean (ret, TRUE); |
| |
| gst_query_parse_duration (fold->query, NULL, &duration); |
| |
| GST_DEBUG_OBJECT (item, "got duration %" G_GINT64_FORMAT, duration); |
| |
| if (duration > fold->max) |
| fold->max = duration; |
| } |
| |
| gst_object_unref (item); |
| return TRUE; |
| } |
| static void |
| bin_query_duration_done (GstBin * bin, QueryFold * fold) |
| { |
| GstFormat format; |
| |
| gst_query_parse_duration (fold->query, &format, NULL); |
| /* store max in query result */ |
| gst_query_set_duration (fold->query, format, fold->max); |
| |
| GST_DEBUG_OBJECT (bin, "max duration %" G_GINT64_FORMAT, fold->max); |
| |
| #ifdef DURATION_CACHING |
| /* and cache now */ |
| GST_OBJECT_LOCK (bin); |
| bin->messages = g_list_prepend (bin->messages, |
| gst_message_new_duration (GST_OBJECT_CAST (bin), format, fold->max)); |
| GST_OBJECT_UNLOCK (bin); |
| #endif |
| } |
| |
| static gboolean |
| bin_query_position_fold (GstElement * item, GValue * ret, QueryFold * fold) |
| { |
| if (gst_element_query (item, fold->query)) { |
| gint64 position; |
| |
| g_value_set_boolean (ret, TRUE); |
| |
| gst_query_parse_position (fold->query, NULL, &position); |
| |
| GST_DEBUG_OBJECT (item, "got position %" G_GINT64_FORMAT, position); |
| |
| if (position > fold->max) |
| fold->max = position; |
| } |
| |
| gst_object_unref (item); |
| return TRUE; |
| } |
| static void |
| bin_query_position_done (GstBin * bin, QueryFold * fold) |
| { |
| GstFormat format; |
| |
| gst_query_parse_position (fold->query, &format, NULL); |
| /* store max in query result */ |
| gst_query_set_position (fold->query, format, fold->max); |
| |
| GST_DEBUG_OBJECT (bin, "max position %" G_GINT64_FORMAT, fold->max); |
| } |
| |
| static gboolean |
| bin_query_latency_fold (GstElement * item, GValue * ret, QueryFold * fold) |
| { |
| if (gst_element_query (item, fold->query)) { |
| GstClockTime min, max; |
| gboolean live; |
| |
| g_value_set_boolean (ret, TRUE); |
| |
| gst_query_parse_latency (fold->query, &live, &min, &max); |
| |
| GST_DEBUG_OBJECT (item, |
| "got latency min %" GST_TIME_FORMAT ", max %" GST_TIME_FORMAT |
| ", live %d", GST_TIME_ARGS (min), GST_TIME_ARGS (max), live); |
| |
| /* for the combined latency we collect the MAX of all min latencies and |
| * the MIN of all max latencies */ |
| if (min > fold->min) |
| fold->min = min; |
| if (fold->max == -1) |
| fold->max = max; |
| else if (max < fold->max) |
| fold->max = max; |
| if (fold->live == FALSE) |
| fold->live = live; |
| } |
| |
| gst_object_unref (item); |
| return TRUE; |
| } |
| static void |
| bin_query_latency_done (GstBin * bin, QueryFold * fold) |
| { |
| /* store max in query result */ |
| gst_query_set_latency (fold->query, fold->live, fold->min, fold->max); |
| |
| GST_DEBUG_OBJECT (bin, |
| "latency min %" GST_TIME_FORMAT ", max %" GST_TIME_FORMAT |
| ", live %d", GST_TIME_ARGS (fold->min), GST_TIME_ARGS (fold->max), |
| fold->live); |
| } |
| |
| |
| /* generic fold, return first valid result */ |
| static gboolean |
| bin_query_generic_fold (GstElement * item, GValue * ret, QueryFold * fold) |
| { |
| gboolean res; |
| |
| if ((res = gst_element_query (item, fold->query))) { |
| g_value_set_boolean (ret, TRUE); |
| GST_DEBUG_OBJECT (item, "answered query %p", fold->query); |
| } |
| |
| gst_object_unref (item); |
| |
| /* and stop as soon as we have a valid result */ |
| return !res; |
| } |
| |
| static gboolean |
| gst_bin_query (GstElement * element, GstQuery * query) |
| { |
| GstBin *bin = GST_BIN (element); |
| GstIterator *iter; |
| gboolean res = FALSE; |
| GstIteratorFoldFunction fold_func; |
| QueryInitFunction fold_init = NULL; |
| QueryDoneFunction fold_done = NULL; |
| QueryFold fold_data; |
| GValue ret = { 0 }; |
| |
| switch (GST_QUERY_TYPE (query)) { |
| case GST_QUERY_DURATION: |
| { |
| #ifdef DURATION_CACHING |
| GList *cached; |
| GstFormat qformat; |
| |
| gst_query_parse_duration (query, &qformat, NULL); |
| |
| /* find cached duration query */ |
| GST_OBJECT_LOCK (bin); |
| for (cached = bin->messages; cached; cached = g_list_next (cached)) { |
| GstMessage *message = (GstMessage *) cached->data; |
| |
| if (GST_MESSAGE_TYPE (message) == GST_MESSAGE_DURATION && |
| GST_MESSAGE_SRC (message) == GST_OBJECT_CAST (bin)) { |
| GstFormat format; |
| gint64 duration; |
| |
| gst_message_parse_duration (message, &format, &duration); |
| |
| /* if cached same format, copy duration in query result */ |
| if (format == qformat) { |
| GST_DEBUG_OBJECT (bin, "return cached duration %" G_GINT64_FORMAT, |
| duration); |
| GST_OBJECT_UNLOCK (bin); |
| |
| gst_query_set_duration (query, qformat, duration); |
| res = TRUE; |
| goto exit; |
| } |
| } |
| } |
| GST_OBJECT_UNLOCK (bin); |
| #endif |
| /* no cached value found, iterate and collect durations */ |
| fold_func = (GstIteratorFoldFunction) bin_query_duration_fold; |
| fold_init = bin_query_min_max_init; |
| fold_done = bin_query_duration_done; |
| break; |
| } |
| case GST_QUERY_POSITION: |
| { |
| fold_func = (GstIteratorFoldFunction) bin_query_position_fold; |
| fold_init = bin_query_min_max_init; |
| fold_done = bin_query_position_done; |
| break; |
| } |
| case GST_QUERY_LATENCY: |
| { |
| fold_func = (GstIteratorFoldFunction) bin_query_latency_fold; |
| fold_init = bin_query_min_max_init; |
| fold_done = bin_query_latency_done; |
| break; |
| } |
| default: |
| fold_func = (GstIteratorFoldFunction) bin_query_generic_fold; |
| break; |
| } |
| |
| fold_data.query = query; |
| |
| g_value_init (&ret, G_TYPE_BOOLEAN); |
| g_value_set_boolean (&ret, FALSE); |
| |
| iter = gst_bin_iterate_sinks (bin); |
| GST_DEBUG_OBJECT (bin, "Sending query %p (type %d) to sink children", |
| query, GST_QUERY_TYPE (query)); |
| |
| if (fold_init) |
| fold_init (bin, &fold_data); |
| |
| while (TRUE) { |
| GstIteratorResult ires; |
| |
| ires = gst_iterator_fold (iter, fold_func, &ret, &fold_data); |
| |
| switch (ires) { |
| case GST_ITERATOR_RESYNC: |
| gst_iterator_resync (iter); |
| if (fold_init) |
| fold_init (bin, &fold_data); |
| g_value_set_boolean (&ret, FALSE); |
| break; |
| case GST_ITERATOR_OK: |
| case GST_ITERATOR_DONE: |
| res = g_value_get_boolean (&ret); |
| if (fold_done != NULL && res) |
| fold_done (bin, &fold_data); |
| goto done; |
| default: |
| res = FALSE; |
| goto done; |
| } |
| } |
| done: |
| gst_iterator_free (iter); |
| |
| #ifdef DURATION_CACHING |
| exit: |
| #endif |
| GST_DEBUG_OBJECT (bin, "query %p result %d", query, res); |
| |
| return res; |
| } |
| |
| static gint |
| compare_name (GstElement * element, const gchar * name) |
| { |
| gint eq; |
| |
| GST_OBJECT_LOCK (element); |
| eq = strcmp (GST_ELEMENT_NAME (element), name); |
| GST_OBJECT_UNLOCK (element); |
| |
| if (eq != 0) { |
| gst_object_unref (element); |
| } |
| return eq; |
| } |
| |
| /** |
| * gst_bin_get_by_name: |
| * @bin: a #GstBin |
| * @name: the element name to search for |
| * |
| * Gets the element with the given name from a bin. This |
| * function recurses into child bins. |
| * |
| * Returns NULL if no element with the given name is found in the bin. |
| * |
| * MT safe. Caller owns returned reference. |
| * |
| * Returns: the #GstElement with the given name, or NULL |
| */ |
| GstElement * |
| gst_bin_get_by_name (GstBin * bin, const gchar * name) |
| { |
| GstIterator *children; |
| GstIterator *result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| |
| GST_CAT_INFO (GST_CAT_PARENTAGE, "[%s]: looking up child element %s", |
| GST_ELEMENT_NAME (bin), name); |
| |
| children = gst_bin_iterate_recurse (bin); |
| result = gst_iterator_find_custom (children, |
| (GCompareFunc) compare_name, (gpointer) name); |
| gst_iterator_free (children); |
| |
| return GST_ELEMENT_CAST (result); |
| } |
| |
| /** |
| * gst_bin_get_by_name_recurse_up: |
| * @bin: a #GstBin |
| * @name: the element name to search for |
| * |
| * Gets the element with the given name from this bin. If the |
| * element is not found, a recursion is performed on the parent bin. |
| * |
| * Returns NULL if: |
| * - no element with the given name is found in the bin |
| * |
| * MT safe. Caller owns returned reference. |
| * |
| * Returns: the #GstElement with the given name, or NULL |
| */ |
| GstElement * |
| gst_bin_get_by_name_recurse_up (GstBin * bin, const gchar * name) |
| { |
| GstElement *result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| g_return_val_if_fail (name != NULL, NULL); |
| |
| result = gst_bin_get_by_name (bin, name); |
| |
| if (!result) { |
| GstObject *parent; |
| |
| parent = gst_object_get_parent (GST_OBJECT_CAST (bin)); |
| if (parent) { |
| if (GST_IS_BIN (parent)) { |
| result = gst_bin_get_by_name_recurse_up (GST_BIN_CAST (parent), name); |
| } |
| gst_object_unref (parent); |
| } |
| } |
| |
| return result; |
| } |
| |
| static gint |
| compare_interface (GstElement * element, gpointer interface) |
| { |
| GType interface_type = (GType) interface; |
| gint ret; |
| |
| if (G_TYPE_CHECK_INSTANCE_TYPE (element, interface_type)) { |
| ret = 0; |
| } else { |
| /* we did not find the element, need to release the ref |
| * added by the iterator */ |
| gst_object_unref (element); |
| ret = 1; |
| } |
| return ret; |
| } |
| |
| /** |
| * gst_bin_get_by_interface: |
| * @bin: a #GstBin |
| * @iface: the #GType of an interface |
| * |
| * Looks for an element inside the bin that implements the given |
| * interface. If such an element is found, it returns the element. |
| * You can cast this element to the given interface afterwards. If you want |
| * all elements that implement the interface, use |
| * gst_bin_iterate_all_by_interface(). This function recurses into child bins. |
| * |
| * MT safe. Caller owns returned reference. |
| * |
| * Returns: A #GstElement inside the bin implementing the interface |
| */ |
| GstElement * |
| gst_bin_get_by_interface (GstBin * bin, GType iface) |
| { |
| GstIterator *children; |
| gpointer result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| g_return_val_if_fail (G_TYPE_IS_INTERFACE (iface), NULL); |
| |
| children = gst_bin_iterate_recurse (bin); |
| result = gst_iterator_find_custom (children, (GCompareFunc) compare_interface, |
| (gpointer) iface); |
| gst_iterator_free (children); |
| |
| return GST_ELEMENT_CAST (result); |
| } |
| |
| /** |
| * gst_bin_iterate_all_by_interface: |
| * @bin: a #GstBin |
| * @iface: the #GType of an interface |
| * |
| * Looks for all elements inside the bin that implements the given |
| * interface. You can safely cast all returned elements to the given interface. |
| * The function recurses inside child bins. The iterator will yield a series |
| * of #GstElement that should be unreffed after use. |
| * |
| * Each element yielded by the iterator will have its refcount increased, so |
| * unref after use. |
| * |
| * MT safe. Caller owns returned value. |
| * |
| * Returns: a #GstIterator of #GstElement for all elements in the bin |
| * implementing the given interface, or NULL |
| */ |
| GstIterator * |
| gst_bin_iterate_all_by_interface (GstBin * bin, GType iface) |
| { |
| GstIterator *children; |
| GstIterator *result; |
| |
| g_return_val_if_fail (GST_IS_BIN (bin), NULL); |
| g_return_val_if_fail (G_TYPE_IS_INTERFACE (iface), NULL); |
| |
| children = gst_bin_iterate_recurse (bin); |
| result = gst_iterator_filter (children, (GCompareFunc) compare_interface, |
| (gpointer) iface); |
| |
| return result; |
| } |
| |
| #ifndef GST_DISABLE_LOADSAVE |
| static xmlNodePtr |
| gst_bin_save_thyself (GstObject * object, xmlNodePtr parent) |
| { |
| GstBin *bin = GST_BIN (object); |
| xmlNodePtr childlist, elementnode; |
| GList *children; |
| GstElement *child; |
| |
| if (GST_OBJECT_CLASS (parent_class)->save_thyself) |
| GST_OBJECT_CLASS (parent_class)->save_thyself (GST_OBJECT (bin), parent); |
| |
| childlist = xmlNewChild (parent, NULL, (xmlChar *) "children", NULL); |
| |
| GST_CAT_INFO (GST_CAT_XML, "[%s]: saving %d children", |
| GST_ELEMENT_NAME (bin), bin->numchildren); |
| |
| children = bin->children; |
| while (children) { |
| child = GST_ELEMENT (children->data); |
| elementnode = xmlNewChild (childlist, NULL, (xmlChar *) "element", NULL); |
| gst_object_save_thyself (GST_OBJECT (child), elementnode); |
| children = g_list_next (children); |
| } |
| return childlist; |
| } |
| |
| static void |
| gst_bin_restore_thyself (GstObject * object, xmlNodePtr self) |
| { |
| GstBin *bin = GST_BIN (object); |
| xmlNodePtr field = self->xmlChildrenNode; |
| xmlNodePtr childlist; |
| |
| while (field) { |
| if (!strcmp ((char *) field->name, "children")) { |
| GST_CAT_INFO (GST_CAT_XML, "[%s]: loading children", |
| GST_ELEMENT_NAME (object)); |
| childlist = field->xmlChildrenNode; |
| while (childlist) { |
| if (!strcmp ((char *) childlist->name, "element")) { |
| /* gst_xml_make_element will gst_bin_add() the element to ourself */ |
| gst_xml_make_element (childlist, GST_OBJECT (bin)); |
| } |
| childlist = childlist->next; |
| } |
| } |
| |
| field = field->next; |
| } |
| if (GST_OBJECT_CLASS (parent_class)->restore_thyself) |
| (GST_OBJECT_CLASS (parent_class)->restore_thyself) (object, self); |
| } |
| #endif /* GST_DISABLE_LOADSAVE */ |