| /* GStreamer |
| * |
| * Copyright (C) 2007 Rene Stadler <mail@renestadler.de> |
| * Copyright (C) 2007-2009 Sebastian Dröge <sebastian.droege@collabora.co.uk> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Library General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Library General Public License for more details. |
| * |
| * You should have received a copy of the GNU Library General Public |
| * License along with this library; if not, write to the |
| * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, |
| * Boston, MA 02110-1301, USA. |
| */ |
| |
| /** |
| * SECTION:element-giosink |
| * @title: giosink |
| * @see_also: #GstFileSink, #GstGnomeVFSSink, #GstGioSrc |
| * |
| * This plugin writes incoming data to a local or remote location specified |
| * by an URI. This location can be specified using any protocol supported by |
| * the GIO library or it's VFS backends. Common protocols are 'file', 'ftp', |
| * or 'smb'. |
| * |
| * If the URI or #GFile already exists giosink will post a message of |
| * type %GST_MESSAGE_ELEMENT with name "file-exists" on the bus. The message |
| * also contains the #GFile and the corresponding URI. |
| * Applications can use the "file-exists" message to notify the user about |
| * the problem and to set a different target location or to remove the |
| * existing file. Note that right after the "file-exists" message a normal |
| * error message is posted on the bus which should be ignored if "file-exists" |
| * is handled by the application, for example by calling |
| * gst_bus_set_flushing(bus, TRUE) after the "file-exists" message was |
| * received and gst_bus_set_flushing(bus, FALSE) after the problem is |
| * resolved. |
| * |
| * Similar to the "file-exist" message a "not-mounted" message is posted |
| * on the bus if the target location is not mounted yet and needs to be |
| * mounted. This message can be used by application to mount the location |
| * and retry after the location was mounted successfully. |
| * |
| * ## Example pipelines |
| * |[ |
| * gst-launch-1.0 -v filesrc location=input.xyz ! giosink location=file:///home/joe/out.xyz |
| * ]| |
| * The above pipeline will simply copy a local file. Instead of giosink, |
| * we could just as well have used the filesink element here. |
| * |[ |
| * gst-launch-1.0 -v uridecodebin uri=file:///path/to/audio.file ! audioconvert ! flacenc ! giosink location=smb://othercomputer/foo.flac |
| * ]| |
| * The above pipeline will re-encode an audio file into FLAC format and store |
| * it on a remote host using the Samba protocol. |
| * |[ |
| * gst-launch-1.0 -v audiotestsrc num-buffers=100 ! vorbisenc ! oggmux ! giosink location=file:///home/foo/bar.ogg |
| * ]| |
| * The above pipeline will encode a 440Hz sine wave to Ogg Vorbis and stores |
| * it in the home directory of user foo. |
| * |
| */ |
| |
| /* FIXME: We would like to mount the enclosing volume of an URL |
| * if it isn't mounted yet but this is possible async-only. |
| * Unfortunately this requires a running main loop from the |
| * default context and we can't guarantee this! |
| * |
| * We would also like to do authentication while mounting. |
| */ |
| |
| #ifdef HAVE_CONFIG_H |
| #include <config.h> |
| #endif |
| |
| #include "gstgiosink.h" |
| |
| GST_DEBUG_CATEGORY_STATIC (gst_gio_sink_debug); |
| #define GST_CAT_DEFAULT gst_gio_sink_debug |
| |
| /* Filter signals and args */ |
| enum |
| { |
| LAST_SIGNAL |
| }; |
| |
| enum |
| { |
| PROP_0, |
| PROP_LOCATION, |
| PROP_FILE |
| }; |
| |
| #define gst_gio_sink_parent_class parent_class |
| G_DEFINE_TYPE_WITH_CODE (GstGioSink, gst_gio_sink, GST_TYPE_GIO_BASE_SINK, |
| gst_gio_uri_handler_do_init (g_define_type_id)); |
| |
| static void gst_gio_sink_finalize (GObject * object); |
| static void gst_gio_sink_set_property (GObject * object, guint prop_id, |
| const GValue * value, GParamSpec * pspec); |
| static void gst_gio_sink_get_property (GObject * object, guint prop_id, |
| GValue * value, GParamSpec * pspec); |
| static GOutputStream *gst_gio_sink_get_stream (GstGioBaseSink * base_sink); |
| |
| static void |
| gst_gio_sink_class_init (GstGioSinkClass * klass) |
| { |
| GObjectClass *gobject_class = (GObjectClass *) klass; |
| GstElementClass *gstelement_class = (GstElementClass *) klass; |
| GstGioBaseSinkClass *gstgiobasesink_class = (GstGioBaseSinkClass *) klass; |
| |
| GST_DEBUG_CATEGORY_INIT (gst_gio_sink_debug, "gio_sink", 0, "GIO sink"); |
| |
| gobject_class->finalize = gst_gio_sink_finalize; |
| gobject_class->set_property = gst_gio_sink_set_property; |
| gobject_class->get_property = gst_gio_sink_get_property; |
| |
| g_object_class_install_property (gobject_class, PROP_LOCATION, |
| g_param_spec_string ("location", "Location", "URI location to write to", |
| NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| |
| /** |
| * GstGioSink:file: |
| * |
| * %GFile to write to. |
| */ |
| g_object_class_install_property (gobject_class, PROP_FILE, |
| g_param_spec_object ("file", "File", "GFile to write to", |
| G_TYPE_FILE, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| |
| gst_element_class_set_static_metadata (gstelement_class, "GIO sink", |
| "Sink/File", |
| "Write to any GIO-supported location", |
| "Ren\xc3\xa9 Stadler <mail@renestadler.de>, " |
| "Sebastian Dröge <sebastian.droege@collabora.co.uk>"); |
| |
| gstgiobasesink_class->get_stream = |
| GST_DEBUG_FUNCPTR (gst_gio_sink_get_stream); |
| gstgiobasesink_class->close_on_stop = TRUE; |
| } |
| |
| static void |
| gst_gio_sink_init (GstGioSink * sink) |
| { |
| } |
| |
| static void |
| gst_gio_sink_finalize (GObject * object) |
| { |
| GstGioSink *sink = GST_GIO_SINK (object); |
| |
| if (sink->file) { |
| g_object_unref (sink->file); |
| sink->file = NULL; |
| } |
| |
| GST_CALL_PARENT (G_OBJECT_CLASS, finalize, (object)); |
| } |
| |
| static void |
| gst_gio_sink_set_property (GObject * object, guint prop_id, |
| const GValue * value, GParamSpec * pspec) |
| { |
| GstGioSink *sink = GST_GIO_SINK (object); |
| |
| switch (prop_id) { |
| case PROP_LOCATION:{ |
| const gchar *uri = NULL; |
| |
| if (GST_STATE (sink) == GST_STATE_PLAYING || |
| GST_STATE (sink) == GST_STATE_PAUSED) { |
| GST_WARNING |
| ("Setting a new location or GFile not supported in PLAYING or PAUSED state"); |
| break; |
| } |
| |
| GST_OBJECT_LOCK (GST_OBJECT (sink)); |
| if (sink->file) |
| g_object_unref (sink->file); |
| |
| uri = g_value_get_string (value); |
| |
| if (uri) { |
| sink->file = g_file_new_for_uri (uri); |
| |
| if (!sink->file) { |
| GST_ERROR ("Could not create GFile for URI '%s'", uri); |
| } |
| } else { |
| sink->file = NULL; |
| } |
| GST_OBJECT_UNLOCK (GST_OBJECT (sink)); |
| break; |
| } |
| case PROP_FILE: |
| if (GST_STATE (sink) == GST_STATE_PLAYING || |
| GST_STATE (sink) == GST_STATE_PAUSED) { |
| GST_WARNING |
| ("Setting a new location or GFile not supported in PLAYING or PAUSED state"); |
| break; |
| } |
| |
| GST_OBJECT_LOCK (GST_OBJECT (sink)); |
| if (sink->file) |
| g_object_unref (sink->file); |
| |
| sink->file = g_value_dup_object (value); |
| |
| GST_OBJECT_UNLOCK (GST_OBJECT (sink)); |
| break; |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static void |
| gst_gio_sink_get_property (GObject * object, guint prop_id, |
| GValue * value, GParamSpec * pspec) |
| { |
| GstGioSink *sink = GST_GIO_SINK (object); |
| |
| switch (prop_id) { |
| case PROP_LOCATION:{ |
| gchar *uri; |
| |
| GST_OBJECT_LOCK (GST_OBJECT (sink)); |
| if (sink->file) { |
| uri = g_file_get_uri (sink->file); |
| g_value_set_string (value, uri); |
| g_free (uri); |
| } else { |
| g_value_set_string (value, NULL); |
| } |
| GST_OBJECT_UNLOCK (GST_OBJECT (sink)); |
| break; |
| } |
| case PROP_FILE: |
| GST_OBJECT_LOCK (GST_OBJECT (sink)); |
| g_value_set_object (value, sink->file); |
| GST_OBJECT_UNLOCK (GST_OBJECT (sink)); |
| break; |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static GOutputStream * |
| gst_gio_sink_get_stream (GstGioBaseSink * bsink) |
| { |
| GstGioSink *sink = GST_GIO_SINK (bsink); |
| GOutputStream *stream; |
| GCancellable *cancel = GST_GIO_BASE_SINK (sink)->cancel; |
| GError *err = NULL; |
| gchar *uri; |
| |
| if (sink->file == NULL) { |
| GST_ELEMENT_ERROR (sink, RESOURCE, OPEN_WRITE, (NULL), |
| ("No location or GFile given")); |
| return NULL; |
| } |
| |
| uri = g_file_get_uri (sink->file); |
| if (!uri) |
| uri = g_strdup ("(null)"); |
| |
| stream = |
| G_OUTPUT_STREAM (g_file_create (sink->file, G_FILE_CREATE_NONE, cancel, |
| &err)); |
| |
| if (!stream) { |
| if (!gst_gio_error (sink, "g_file_create", &err, NULL)) { |
| /*if (GST_GIO_ERROR_MATCHES (err, EXISTS)) */ |
| /* FIXME: Retry with replace if overwrite == TRUE! */ |
| |
| if (GST_GIO_ERROR_MATCHES (err, NOT_FOUND)) { |
| GST_ELEMENT_ERROR (sink, RESOURCE, NOT_FOUND, (NULL), |
| ("Could not open location %s for writing: %s", uri, err->message)); |
| } else if (GST_GIO_ERROR_MATCHES (err, EXISTS)) { |
| gst_element_post_message (GST_ELEMENT_CAST (sink), |
| gst_message_new_element (GST_OBJECT_CAST (sink), |
| gst_structure_new ("file-exists", "file", G_TYPE_FILE, |
| sink->file, "uri", G_TYPE_STRING, uri, NULL))); |
| |
| GST_ELEMENT_ERROR (sink, RESOURCE, OPEN_WRITE, (NULL), |
| ("Location %s already exists: %s", uri, err->message)); |
| } else if (GST_GIO_ERROR_MATCHES (err, NOT_MOUNTED)) { |
| gst_element_post_message (GST_ELEMENT_CAST (sink), |
| gst_message_new_element (GST_OBJECT_CAST (sink), |
| gst_structure_new ("not-mounted", "file", G_TYPE_FILE, |
| sink->file, "uri", G_TYPE_STRING, uri, NULL))); |
| |
| GST_ELEMENT_ERROR (sink, RESOURCE, OPEN_WRITE, (NULL), |
| ("Location %s not mounted: %s", uri, err->message)); |
| } else { |
| GST_ELEMENT_ERROR (sink, RESOURCE, OPEN_WRITE, (NULL), |
| ("Could not open location %s for writing: %s", uri, err->message)); |
| } |
| |
| g_clear_error (&err); |
| } |
| g_free (uri); |
| return NULL; |
| } |
| |
| GST_DEBUG_OBJECT (sink, "opened location %s", uri); |
| |
| g_free (uri); |
| |
| return stream; |
| } |