| /* GStreamer |
| * Copyright (C) <1999> Erik Walthinsen <omega@cse.ogi.edu> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Library General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Library General Public License for more details. |
| * |
| * You should have received a copy of the GNU Library General Public |
| * License along with this library; if not, write to the |
| * Free Software Foundation, Inc., 59 Temple Place - Suite 330, |
| * Boston, MA 02111-1307, USA. |
| */ |
| |
| /*#define GST_DEBUG_ENABLED */ |
| #include <gstmpegaudioparse.h> |
| |
| |
| /* elementfactory information */ |
| static GstElementDetails mp3parse_details = { |
| "MPEG1 Audio Parser", |
| "Codec/Parser", |
| "LGPL", |
| "Parses and frames mpeg1 audio streams (levels 1-3), provides seek", |
| VERSION, |
| "Erik Walthinsen <omega@cse.ogi.edu>", |
| "(C) 1999", |
| }; |
| |
| static GstPadTemplate* |
| mp3_src_factory (void) |
| { |
| return |
| gst_pad_template_new ( |
| "src", |
| GST_PAD_SRC, |
| GST_PAD_ALWAYS, |
| gst_caps_new ( |
| "mp3parse_src", |
| "audio/mp3", |
| /* |
| gst_props_new ( |
| "layer", GST_PROPS_INT_RANGE (1, 3), |
| "bitrate", GST_PROPS_INT_RANGE (8, 320), |
| "framed", GST_PROPS_BOOLEAN (TRUE), |
| */ |
| NULL), |
| NULL); |
| } |
| |
| static GstPadTemplate* |
| mp3_sink_factory (void) |
| { |
| return |
| gst_pad_template_new ( |
| "sink", |
| GST_PAD_SINK, |
| GST_PAD_ALWAYS, |
| gst_caps_new ( |
| "mp3parse_sink", |
| "audio/mp3", |
| NULL), |
| NULL); |
| }; |
| |
| /* GstMPEGAudioParse signals and args */ |
| enum { |
| /* FILL ME */ |
| LAST_SIGNAL |
| }; |
| |
| enum { |
| ARG_0, |
| ARG_SKIP, |
| ARG_BIT_RATE, |
| /* FILL ME */ |
| }; |
| |
| static GstPadTemplate *sink_temp, *src_temp; |
| |
| static void gst_mp3parse_class_init (GstMPEGAudioParseClass *klass); |
| static void gst_mp3parse_init (GstMPEGAudioParse *mp3parse); |
| |
| static void gst_mp3parse_loop (GstElement *element); |
| static void gst_mp3parse_chain (GstPad *pad,GstBuffer *buf); |
| static long bpf_from_header (GstMPEGAudioParse *parse, unsigned long header); |
| static int head_check (unsigned long head); |
| |
| static void gst_mp3parse_set_property (GObject *object, guint prop_id, const GValue *value, GParamSpec *pspec); |
| static void gst_mp3parse_get_property (GObject *object, guint prop_id, GValue *value, GParamSpec *pspec); |
| |
| static GstElementClass *parent_class = NULL; |
| /*static guint gst_mp3parse_signals[LAST_SIGNAL] = { 0 }; */ |
| |
| GType |
| gst_mp3parse_get_type(void) { |
| static GType mp3parse_type = 0; |
| |
| if (!mp3parse_type) { |
| static const GTypeInfo mp3parse_info = { |
| sizeof(GstMPEGAudioParseClass), NULL, |
| NULL, |
| (GClassInitFunc)gst_mp3parse_class_init, |
| NULL, |
| NULL, |
| sizeof(GstMPEGAudioParse), |
| 0, |
| (GInstanceInitFunc)gst_mp3parse_init, |
| }; |
| mp3parse_type = g_type_register_static(GST_TYPE_ELEMENT, "GstMPEGAudioParse", &mp3parse_info, 0); |
| } |
| return mp3parse_type; |
| } |
| |
| static void |
| gst_mp3parse_class_init (GstMPEGAudioParseClass *klass) |
| { |
| GObjectClass *gobject_class; |
| GstElementClass *gstelement_class; |
| |
| gobject_class = (GObjectClass*)klass; |
| gstelement_class = (GstElementClass*)klass; |
| |
| g_object_class_install_property(G_OBJECT_CLASS(klass), ARG_SKIP, |
| g_param_spec_int("skip","skip","skip", |
| G_MININT,G_MAXINT,0,G_PARAM_READWRITE)); /* CHECKME */ |
| g_object_class_install_property(G_OBJECT_CLASS(klass), ARG_BIT_RATE, |
| g_param_spec_int("bit_rate","bit_rate","bit_rate", |
| G_MININT,G_MAXINT,0,G_PARAM_READABLE)); /* CHECKME */ |
| |
| parent_class = g_type_class_ref(GST_TYPE_ELEMENT); |
| |
| gobject_class->set_property = gst_mp3parse_set_property; |
| gobject_class->get_property = gst_mp3parse_get_property; |
| } |
| |
| static void |
| gst_mp3parse_init (GstMPEGAudioParse *mp3parse) |
| { |
| mp3parse->sinkpad = gst_pad_new_from_template(sink_temp, "sink"); |
| gst_element_add_pad(GST_ELEMENT(mp3parse),mp3parse->sinkpad); |
| |
| gst_element_set_loop_function (GST_ELEMENT(mp3parse),gst_mp3parse_loop); |
| #if 1 /* set this to one to use the old chaining code */ |
| gst_pad_set_chain_function(mp3parse->sinkpad,gst_mp3parse_chain); |
| gst_element_set_loop_function (GST_ELEMENT(mp3parse),NULL); |
| #endif |
| |
| mp3parse->srcpad = gst_pad_new_from_template(src_temp, "src"); |
| gst_element_add_pad(GST_ELEMENT(mp3parse),mp3parse->srcpad); |
| /*gst_pad_set_type_id(mp3parse->srcpad, mp3frametype); */ |
| |
| mp3parse->partialbuf = NULL; |
| mp3parse->skip = 0; |
| mp3parse->in_flush = FALSE; |
| } |
| |
| static guint32 |
| gst_mp3parse_next_header (guchar *buf,guint32 len,guint32 start) |
| { |
| guint32 offset = start; |
| int f = 0; |
| |
| while (offset < (len - 4)) { |
| fprintf(stderr,"%02x ",buf[offset]); |
| if (buf[offset] == 0xff) |
| f = 1; |
| else if (f && ((buf[offset] >> 4) == 0x0f)) |
| return offset - 1; |
| else |
| f = 0; |
| offset++; |
| } |
| return -1; |
| } |
| |
| static void |
| gst_mp3parse_loop (GstElement *element) |
| { |
| GstMPEGAudioParse *parse = GST_MP3PARSE(element); |
| GstBuffer *inbuf, *outbuf; |
| guint32 size, offset; |
| guchar *data; |
| guint32 start; |
| guint32 header; |
| gint bpf; |
| |
| while (1) { |
| /* get a new buffer */ |
| inbuf = gst_pad_pull (parse->sinkpad); |
| size = GST_BUFFER_SIZE (inbuf); |
| data = GST_BUFFER_DATA (inbuf); |
| offset = 0; |
| fprintf(stderr, "have buffer of %d bytes\n",size); |
| |
| /* loop through it and find all the frames */ |
| while (offset < (size - 4)) { |
| start = gst_mp3parse_next_header (data,size,offset); |
| fprintf(stderr, "skipped %d bytes searching for the next header\n",start-offset); |
| header = GULONG_FROM_BE(*((guint32 *)(data+start))); |
| fprintf(stderr, "header is 0x%08x\n",header); |
| |
| /* figure out how big the frame is supposed to be */ |
| bpf = bpf_from_header (parse, header); |
| |
| /* see if there are enough bytes in this buffer for the whole frame */ |
| if ((start + bpf) <= size) { |
| outbuf = gst_buffer_create_sub (inbuf,start,bpf); |
| fprintf(stderr, "sending buffer of %d bytes\n",bpf); |
| gst_pad_push (parse->srcpad, outbuf); |
| offset = start + bpf; |
| |
| /* if not, we have to deal with it somehow */ |
| } else { |
| fprintf(stderr,"don't have enough data for this frame\n"); |
| |
| break; |
| } |
| } |
| } |
| } |
| |
| static void |
| gst_mp3parse_chain (GstPad *pad, GstBuffer *buf) |
| { |
| GstMPEGAudioParse *mp3parse; |
| guchar *data; |
| glong size,offset = 0; |
| unsigned long header; |
| int bpf; |
| GstBuffer *outbuf; |
| guint64 last_ts; |
| |
| g_return_if_fail(pad != NULL); |
| g_return_if_fail(GST_IS_PAD(pad)); |
| g_return_if_fail(buf != NULL); |
| /* g_return_if_fail(GST_IS_BUFFER(buf)); */ |
| |
| mp3parse = GST_MP3PARSE (gst_pad_get_parent (pad)); |
| |
| GST_DEBUG (0,"mp3parse: received buffer of %d bytes",GST_BUFFER_SIZE(buf)); |
| |
| last_ts = GST_BUFFER_TIMESTAMP(buf); |
| |
| /* FIXME, do flush */ |
| /* |
| if (mp3parse->partialbuf) { |
| gst_buffer_unref(mp3parse->partialbuf); |
| mp3parse->partialbuf = NULL; |
| } |
| mp3parse->in_flush = TRUE; |
| */ |
| |
| /* if we have something left from the previous frame */ |
| if (mp3parse->partialbuf) { |
| |
| mp3parse->partialbuf = gst_buffer_merge(mp3parse->partialbuf, buf); |
| /* and the one we received.. */ |
| gst_buffer_unref(buf); |
| } |
| else { |
| mp3parse->partialbuf = buf; |
| } |
| |
| size = GST_BUFFER_SIZE(mp3parse->partialbuf); |
| data = GST_BUFFER_DATA(mp3parse->partialbuf); |
| |
| /* while we still have bytes left -4 for the header */ |
| while (offset < size-4) { |
| int skipped = 0; |
| |
| GST_DEBUG (0,"mp3parse: offset %ld, size %ld ",offset, size); |
| |
| /* search for a possible start byte */ |
| for (;((data[offset] != 0xff) && (offset < size));offset++) skipped++; |
| if (skipped && !mp3parse->in_flush) { |
| GST_DEBUG (0,"mp3parse: **** now at %ld skipped %d bytes",offset,skipped); |
| } |
| /* construct the header word */ |
| header = GULONG_FROM_BE(*((gulong *)(data+offset))); |
| /* if it's a valid header, go ahead and send off the frame */ |
| if (head_check(header)) { |
| /* calculate the bpf of the frame */ |
| bpf = bpf_from_header(mp3parse, header); |
| |
| /******************************************************************************** |
| * robust seek support |
| * - This performs additional frame validation if the in_flush flag is set |
| * (indicating a discontinuous stream). |
| * - The current frame header is not accepted as valid unless the NEXT frame |
| * header has the same values for most fields. This significantly increases |
| * the probability that we aren't processing random data. |
| * - It is not clear if this is sufficient for robust seeking of Layer III |
| * streams which utilize the concept of a "bit reservoir" by borrow bitrate |
| * from previous frames. In this case, seeking may be more complicated because |
| * the frames are not independently coded. |
| ********************************************************************************/ |
| if ( mp3parse->in_flush ) { |
| unsigned long header2; |
| |
| if ((size-offset)<(bpf+4)) { if (mp3parse->in_flush) break; } /* wait until we have the the entire current frame as well as the next frame header */ |
| |
| header2 = GULONG_FROM_BE(*((gulong *)(data+offset+bpf))); |
| GST_DEBUG(0,"mp3parse: header=%08lX, header2=%08lX, bpf=%d", header, header2, bpf ); |
| |
| #define HDRMASK ~( (0xF<<12)/*bitrate*/ | (1<<9)/*padding*/ | (3<<4)/*mode extension*/ ) /* mask the bits which are allowed to differ between frames */ |
| |
| if ( (header2&HDRMASK) != (header&HDRMASK) ) { /* require 2 matching headers in a row */ |
| GST_DEBUG(0,"mp3parse: next header doesn't match (header=%08lX, header2=%08lX, bpf=%d)", header, header2, bpf ); |
| offset++; /* This frame is invalid. Start looking for a valid frame at the next position in the stream */ |
| continue; |
| } |
| |
| } |
| |
| /* if we don't have the whole frame... */ |
| if ((size - offset) < bpf) { |
| GST_DEBUG (0,"mp3parse: partial buffer needed %ld < %d ",(size-offset), bpf); |
| break; |
| } else { |
| |
| outbuf = gst_buffer_create_sub(mp3parse->partialbuf,offset,bpf); |
| |
| offset += bpf; |
| if (mp3parse->skip == 0) { |
| GST_DEBUG (0,"mp3parse: pushing buffer of %d bytes",GST_BUFFER_SIZE(outbuf)); |
| if (mp3parse->in_flush) { |
| /* FIXME do some sort of flush event */ |
| mp3parse->in_flush = FALSE; |
| } |
| GST_BUFFER_TIMESTAMP(outbuf) = last_ts; |
| gst_pad_push(mp3parse->srcpad,outbuf); |
| } |
| else { |
| GST_DEBUG (0,"mp3parse: skipping buffer of %d bytes",GST_BUFFER_SIZE(outbuf)); |
| gst_buffer_unref(outbuf); |
| mp3parse->skip--; |
| } |
| } |
| } else { |
| offset++; |
| if (!mp3parse->in_flush) GST_DEBUG (0,"mp3parse: *** wrong header, skipping byte (FIXME?)"); |
| } |
| } |
| /* if we have processed this block and there are still */ |
| /* bytes left not in a partial block, copy them over. */ |
| if (size-offset > 0) { |
| glong remainder = (size - offset); |
| GST_DEBUG (0,"mp3parse: partial buffer needed %ld for trailing bytes",remainder); |
| |
| outbuf = gst_buffer_create_sub(mp3parse->partialbuf,offset,remainder); |
| gst_buffer_unref(mp3parse->partialbuf); |
| mp3parse->partialbuf = outbuf; |
| } |
| else { |
| gst_buffer_unref(mp3parse->partialbuf); |
| mp3parse->partialbuf = NULL; |
| } |
| } |
| |
| static int mp3parse_tabsel[2][3][16] = |
| { { {0, 32, 64, 96, 128, 160, 192, 224, 256, 288, 320, 352, 384, 416, 448, }, |
| {0, 32, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320, 384, }, |
| {0, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320, } }, |
| { {0, 32, 48, 56, 64, 80, 96, 112, 128, 144, 160, 176, 192, 224, 256, }, |
| {0, 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144, 160, }, |
| {0, 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144, 160, } }, |
| }; |
| |
| static long mp3parse_freqs[9] = |
| {44100, 48000, 32000, 22050, 24000, 16000, 11025, 12000, 8000}; |
| |
| |
| static long |
| bpf_from_header (GstMPEGAudioParse *parse, unsigned long header) |
| { |
| int layer_index,layer,lsf,samplerate_index,padding; |
| long bpf; |
| |
| /*mpegver = (header >> 19) & 0x3; // don't need this for bpf */ |
| layer_index = (header >> 17) & 0x3; |
| layer = 4 - layer_index; |
| lsf = (header & (1 << 20)) ? ((header & (1 << 19)) ? 0 : 1) : 1; |
| parse->bit_rate = mp3parse_tabsel[lsf][layer - 1][((header >> 12) & 0xf)]; |
| samplerate_index = (header >> 10) & 0x3; |
| padding = (header >> 9) & 0x1; |
| |
| if (layer == 1) { |
| bpf = parse->bit_rate * 12000; |
| bpf /= mp3parse_freqs[samplerate_index]; |
| bpf = ((bpf + padding) << 2); |
| } else { |
| bpf = parse->bit_rate * 144000; |
| bpf /= mp3parse_freqs[samplerate_index]; |
| bpf += padding; |
| } |
| |
| /*g_print("%08x: layer %d lsf %d bitrate %d samplerate_index %d padding %d - bpf %d\n", */ |
| /*header,layer,lsf,bitrate,samplerate_index,padding,bpf); */ |
| |
| return bpf; |
| } |
| |
| static gboolean |
| head_check (unsigned long head) |
| { |
| GST_DEBUG (0,"checking mp3 header 0x%08lx",head); |
| /* if it's not a valid sync */ |
| if ((head & 0xffe00000) != 0xffe00000) { |
| GST_DEBUG (0,"invalid sync");return FALSE; } |
| /* if it's an invalid MPEG version */ |
| if (((head >> 19) & 3) == 0x1) { |
| GST_DEBUG (0,"invalid MPEG version");return FALSE; } |
| /* if it's an invalid layer */ |
| if (!((head >> 17) & 3)) { |
| GST_DEBUG (0,"invalid layer");return FALSE; } |
| /* if it's an invalid bitrate */ |
| if (((head >> 12) & 0xf) == 0x0) { |
| GST_DEBUG (0,"invalid bitrate");return FALSE; } |
| if (((head >> 12) & 0xf) == 0xf) { |
| GST_DEBUG (0,"invalid bitrate");return FALSE; } |
| /* if it's an invalid samplerate */ |
| if (((head >> 10) & 0x3) == 0x3) { |
| GST_DEBUG (0,"invalid samplerate");return FALSE; } |
| if ((head & 0xffff0000) == 0xfffe0000) { |
| GST_DEBUG (0,"invalid sync");return FALSE; } |
| if (head & 0x00000002) { |
| GST_DEBUG (0,"invalid emphasis");return FALSE; } |
| |
| return TRUE; |
| } |
| |
| static void |
| gst_mp3parse_set_property (GObject *object, guint prop_id, const GValue *value, GParamSpec *pspec) |
| { |
| GstMPEGAudioParse *src; |
| |
| /* it's not null if we got it, but it might not be ours */ |
| g_return_if_fail(GST_IS_MP3PARSE(object)); |
| src = GST_MP3PARSE(object); |
| |
| switch (prop_id) { |
| case ARG_SKIP: |
| src->skip = g_value_get_int (value); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void |
| gst_mp3parse_get_property (GObject *object, guint prop_id, GValue *value, GParamSpec *pspec) |
| { |
| GstMPEGAudioParse *src; |
| |
| /* it's not null if we got it, but it might not be ours */ |
| g_return_if_fail(GST_IS_MP3PARSE(object)); |
| src = GST_MP3PARSE(object); |
| |
| switch (prop_id) { |
| case ARG_SKIP: |
| g_value_set_int (value, src->skip); |
| break; |
| case ARG_BIT_RATE: |
| g_value_set_int (value, src->bit_rate * 1000); |
| break; |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static gboolean |
| plugin_init (GModule *module, GstPlugin *plugin) |
| { |
| GstElementFactory *factory; |
| |
| /* create an elementfactory for the mp3parse element */ |
| factory = gst_element_factory_new ("mp3parse", |
| GST_TYPE_MP3PARSE, |
| &mp3parse_details); |
| g_return_val_if_fail (factory != NULL, FALSE); |
| |
| sink_temp = mp3_sink_factory (); |
| gst_element_factory_add_pad_template (factory, sink_temp); |
| |
| src_temp = mp3_src_factory (); |
| gst_element_factory_add_pad_template (factory, src_temp); |
| |
| gst_plugin_add_feature (plugin, GST_PLUGIN_FEATURE (factory)); |
| |
| return TRUE; |
| } |
| |
| GstPluginDesc plugin_desc = { |
| GST_VERSION_MAJOR, |
| GST_VERSION_MINOR, |
| "mp3parse", |
| plugin_init |
| }; |