| /* |
| * Copyright (c) 2013, The Linux Foundation. All rights reserved. |
| * |
| * Previously licensed under the ISC license by Qualcomm Atheros, Inc. |
| * |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * This file was originally distributed by Qualcomm Atheros, Inc. |
| * under proprietary terms before Copyright ownership was assigned |
| * to the Linux Foundation. |
| */ |
| |
| /* |
| * Airgo Networks, Inc proprietary. All rights reserved. |
| * This file limTimerUtils.cc contains the utility functions |
| * LIM uses for handling various timers. |
| * Author: Chandra Modumudi |
| * Date: 02/13/02 |
| * History:- |
| * Date Modified by Modification Information |
| * -------------------------------------------------------------------- |
| */ |
| |
| #include "limTypes.h" |
| #include "limUtils.h" |
| #include "limAssocUtils.h" |
| #include "limSecurityUtils.h" |
| #include "pmmApi.h" |
| |
| |
| // default value 5000 ms for background scan period when it is disabled |
| #define LIM_BACKGROUND_SCAN_PERIOD_DEFAULT_MS 5000 |
| // channel Switch Timer in ticks |
| #define LIM_CHANNEL_SWITCH_TIMER_TICKS 1 |
| // Lim Quite timer in ticks |
| #define LIM_QUIET_TIMER_TICKS 100 |
| // Lim Quite BSS timer interval in ticks |
| #define LIM_QUIET_BSS_TIMER_TICK 100 |
| // Lim KeepAlive timer default (3000)ms |
| #define LIM_KEEPALIVE_TIMER_MS 3000 |
| // Lim JoinProbeRequest Retry timer default (200)ms |
| #define LIM_JOIN_PROBE_REQ_TIMER_MS 200 |
| |
| //default beacon interval value used in HB timer interval calculation |
| #define LIM_HB_TIMER_BEACON_INTERVAL 100 |
| /** |
| * limCreateTimers() |
| * |
| *FUNCTION: |
| * This function is called upon receiving |
| * 1. SME_START_REQ for STA in ESS role |
| * 2. SME_START_BSS_REQ for AP role & STA in IBSS role |
| * |
| *LOGIC: |
| * |
| *ASSUMPTIONS: |
| * NA |
| * |
| *NOTE: |
| * NA |
| * |
| * @param pMac - Pointer to Global MAC structure |
| * |
| * @return None |
| */ |
| |
| v_UINT_t |
| limCreateTimers(tpAniSirGlobal pMac) |
| { |
| tANI_U32 cfgValue, i=0; |
| |
| PELOG1(limLog(pMac, LOG1, FL("Creating Timers used by LIM module in Role %d"), pMac->lim.gLimSystemRole);) |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_ACTIVE_MINIMUM_CHANNEL_TIME, |
| &cfgValue) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get MinChannelTimeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, FL("could not retrieve MinChannelTimeout value")); |
| } |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| |
| // Create MIN/MAX channel timers and activate them later |
| if (tx_timer_create(&pMac->lim.limTimers.gLimMinChannelTimer, |
| "MIN CHANNEL TIMEOUT", |
| limTimerHandler, SIR_LIM_MIN_CHANNEL_TIMEOUT, |
| cfgValue, 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| /// Could not start min channel timer. |
| // Log error |
| limLog(pMac, LOGP, FL("could not create MIN channel timer")); |
| return TX_TIMER_ERROR; |
| } |
| PELOG2(limLog(pMac, LOG2, FL("Created MinChannelTimer"));) |
| |
| /* Periodic probe request timer value is half of the Min channel |
| * timer. Probe request sends periodically till min/max channel |
| * timer expires |
| */ |
| |
| cfgValue = cfgValue/2 ; |
| if( cfgValue >= 1) |
| { |
| // Create periodic probe request timer and activate them later |
| if (tx_timer_create(&pMac->lim.limTimers.gLimPeriodicProbeReqTimer, |
| "Periodic Probe Request Timer", |
| limTimerHandler, SIR_LIM_PERIODIC_PROBE_REQ_TIMEOUT, |
| cfgValue, 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| /// Could not start Periodic Probe Req timer. |
| // Log error |
| limLog(pMac, LOGP, FL("could not create periodic probe timer")); |
| goto err_timer; |
| } |
| } |
| |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_ACTIVE_MAXIMUM_CHANNEL_TIME, |
| &cfgValue) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get MAXChannelTimeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve MAXChannelTimeout value")); |
| } |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| |
| if (tx_timer_create(&pMac->lim.limTimers.gLimMaxChannelTimer, |
| "MAX CHANNEL TIMEOUT", |
| limTimerHandler, SIR_LIM_MAX_CHANNEL_TIMEOUT, |
| cfgValue, 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| /// Could not start max channel timer. |
| // Log error |
| limLog(pMac, LOGP, FL("could not create MAX channel timer")); |
| |
| goto err_timer; |
| } |
| PELOG2(limLog(pMac, LOG2, FL("Created MaxChannelTimer"));) |
| |
| if (pMac->lim.gLimSystemRole != eLIM_AP_ROLE) |
| { |
| // Create Channel Switch Timer |
| if (tx_timer_create(&pMac->lim.limTimers.gLimChannelSwitchTimer, |
| "CHANNEL SWITCH TIMER", |
| limChannelSwitchTimerHandler, |
| 0, // expiration_input |
| LIM_CHANNEL_SWITCH_TIMER_TICKS, // initial_ticks |
| 0, // reschedule_ticks |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| limLog(pMac, LOGP, FL("failed to create Channel Switch timer")); |
| goto err_timer; |
| } |
| |
| // |
| // Create Quiet Timer |
| // This is used on the STA to go and shut-off |
| // Tx/Rx "after" the specified quiteInterval |
| // |
| if (tx_timer_create(&pMac->lim.limTimers.gLimQuietTimer, |
| "QUIET TIMER", |
| limQuietTimerHandler, |
| SIR_LIM_QUIET_TIMEOUT, // expiration_input |
| LIM_QUIET_TIMER_TICKS, // initial_ticks |
| 0, // reschedule_ticks |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| limLog(pMac, LOGP, FL("failed to create Quiet Begin Timer")); |
| goto err_timer; |
| } |
| |
| // |
| // Create Quiet BSS Timer |
| // After the specified quiteInterval, determined by |
| // gLimQuietTimer, this timer, gLimQuietBssTimer, |
| // trigger and put the STA to sleep for the specified |
| // gLimQuietDuration |
| // |
| if (tx_timer_create(&pMac->lim.limTimers.gLimQuietBssTimer, |
| "QUIET BSS TIMER", |
| limQuietBssTimerHandler, |
| SIR_LIM_QUIET_BSS_TIMEOUT, // expiration_input |
| LIM_QUIET_BSS_TIMER_TICK, // initial_ticks |
| 0, // reschedule_ticks |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| limLog(pMac, LOGP, FL("failed to create Quiet Begin Timer")); |
| goto err_timer; |
| } |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_JOIN_FAILURE_TIMEOUT, |
| &cfgValue) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get JoinFailureTimeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve JoinFailureTimeout value")); |
| } |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| |
| // Create Join failure timer and activate it later |
| if (tx_timer_create(&pMac->lim.limTimers.gLimJoinFailureTimer, |
| "JOIN FAILURE TIMEOUT", |
| limTimerHandler, SIR_LIM_JOIN_FAIL_TIMEOUT, |
| cfgValue, 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| /// Could not create Join failure timer. |
| // Log error |
| limLog(pMac, LOGP, FL("could not create Join failure timer")); |
| |
| goto err_timer; |
| } |
| |
| //Send unicast probe req frame every 200 ms |
| if ((tx_timer_create(&pMac->lim.limTimers.gLimPeriodicJoinProbeReqTimer, |
| "Periodic Join Probe Request Timer", |
| limTimerHandler, SIR_LIM_PERIODIC_JOIN_PROBE_REQ_TIMEOUT, |
| SYS_MS_TO_TICKS(LIM_JOIN_PROBE_REQ_TIMER_MS), 0, |
| TX_NO_ACTIVATE)) != TX_SUCCESS) |
| { |
| /// Could not create Periodic Join Probe Request timer. |
| // Log error |
| limLog(pMac, LOGP, FL("could not create Periodic Join Probe Request timer")); |
| goto err_timer; |
| } |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_ASSOCIATION_FAILURE_TIMEOUT, |
| &cfgValue) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get AssocFailureTimeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve AssocFailureTimeout value")); |
| } |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| |
| // Create Association failure timer and activate it later |
| if (tx_timer_create(&pMac->lim.limTimers.gLimAssocFailureTimer, |
| "ASSOC FAILURE TIMEOUT", |
| limAssocFailureTimerHandler, LIM_ASSOC, |
| cfgValue, 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| /// Could not create Assoc failure timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("could not create Association failure timer")); |
| |
| goto err_timer; |
| } |
| if (wlan_cfgGetInt(pMac, WNI_CFG_REASSOCIATION_FAILURE_TIMEOUT, |
| &cfgValue) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get ReassocFailureTimeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve ReassocFailureTimeout value")); |
| } |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| |
| // Create Association failure timer and activate it later |
| if (tx_timer_create(&pMac->lim.limTimers.gLimReassocFailureTimer, |
| "REASSOC FAILURE TIMEOUT", |
| limAssocFailureTimerHandler, LIM_REASSOC, |
| cfgValue, 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| /// Could not create Reassoc failure timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("could not create Reassociation failure timer")); |
| |
| goto err_timer; |
| } |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_ADDTS_RSP_TIMEOUT, &cfgValue) != eSIR_SUCCESS) |
| limLog(pMac, LOGP, FL("Fail to get WNI_CFG_ADDTS_RSP_TIMEOUT ")); |
| |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| |
| // Create Addts response timer and activate it later |
| if (tx_timer_create(&pMac->lim.limTimers.gLimAddtsRspTimer, |
| "ADDTS RSP TIMEOUT", |
| limAddtsResponseTimerHandler, |
| SIR_LIM_ADDTS_RSP_TIMEOUT, |
| cfgValue, 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| /// Could not create Auth failure timer. |
| // Log error |
| limLog(pMac, LOGP, FL("could not create Addts response timer")); |
| |
| goto err_timer; |
| } |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_AUTHENTICATE_FAILURE_TIMEOUT, |
| &cfgValue) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get AuthFailureTimeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve AuthFailureTimeout value")); |
| } |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| |
| // Create Auth failure timer and activate it later |
| if (tx_timer_create(&pMac->lim.limTimers.gLimAuthFailureTimer, |
| "AUTH FAILURE TIMEOUT", |
| limTimerHandler, |
| SIR_LIM_AUTH_FAIL_TIMEOUT, |
| cfgValue, 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| /// Could not create Auth failure timer. |
| // Log error |
| limLog(pMac, LOGP, FL("could not create Auth failure timer")); |
| |
| goto err_timer; |
| } |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_BEACON_INTERVAL, |
| &cfgValue) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get BEACON_INTERVAL value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve BEACON_INTERVAL value")); |
| } |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| |
| if (tx_timer_create(&pMac->lim.limTimers.gLimHeartBeatTimer, |
| "Heartbeat TIMEOUT", |
| limTimerHandler, |
| SIR_LIM_HEART_BEAT_TIMEOUT, |
| cfgValue, |
| 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| /// Could not start Heartbeat timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("call to create heartbeat timer failed")); |
| goto err_timer; |
| } |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_PROBE_AFTER_HB_FAIL_TIMEOUT, |
| &cfgValue) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get PROBE_AFTER_HB_FAILURE |
| * value from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve PROBE_AFTER_HB_FAIL_TIMEOUT value")); |
| } |
| |
| // Change timer to reactivate it in future |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| |
| if (tx_timer_create(&pMac->lim.limTimers.gLimProbeAfterHBTimer, |
| "Probe after Heartbeat TIMEOUT", |
| limTimerHandler, |
| SIR_LIM_PROBE_HB_FAILURE_TIMEOUT, |
| cfgValue, |
| 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| // Could not creat wt-probe-after-HeartBeat-failure timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("unable to create ProbeAfterHBTimer")); |
| goto err_timer; |
| } |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_BACKGROUND_SCAN_PERIOD, |
| &cfgValue) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get Background scan period value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve Background scan period value")); |
| } |
| |
| /* |
| * setting period to zero means disabling background scans when associated |
| * the way we do this is to set a flag indicating this and keeping |
| * the timer running, since it will be used for PDU leak workarounds |
| * as well as background scanning during SME idle states |
| */ |
| if (cfgValue == 0) |
| { |
| cfgValue = LIM_BACKGROUND_SCAN_PERIOD_DEFAULT_MS; |
| pMac->lim.gLimBackgroundScanDisable = true; |
| } |
| else |
| pMac->lim.gLimBackgroundScanDisable = false; |
| |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| |
| if (tx_timer_create(&pMac->lim.limTimers.gLimBackgroundScanTimer, |
| "Background scan TIMEOUT", |
| limTimerHandler, |
| SIR_LIM_CHANNEL_SCAN_TIMEOUT, |
| cfgValue, |
| cfgValue, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| /// Could not start background scan timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("call to create background scan timer failed")); |
| goto err_timer; |
| } |
| #ifdef FEATURE_WLAN_TDLS_INTERNAL |
| /* |
| * create TDLS timers.. |
| * a) TDLS discovery response timer. |
| */ |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_ASSOCIATION_FAILURE_TIMEOUT, |
| &cfgValue) != eSIR_SUCCESS) |
| { |
| /* |
| * Could not get discovery response Timeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve ReassocFailureTimeout value")); |
| } |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| |
| /* |
| * create TDLS discovery response wait timer and activate it later |
| */ |
| if (tx_timer_create(&pMac->lim.limTimers.gLimTdlsDisRspWaitTimer, |
| "TDLS discovery response WAIT", |
| limTimerHandler, |
| SIR_LIM_TDLS_DISCOVERY_RSP_WAIT, |
| cfgValue, 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| limLog(pMac, LOGP, |
| FL("could not create TDLS discovery response wait timer")); |
| goto err_timer; |
| } |
| #endif |
| } |
| |
| |
| cfgValue = SYS_MS_TO_TICKS(LIM_HASH_MISS_TIMER_MS); |
| |
| if (tx_timer_create( |
| &pMac->lim.limTimers.gLimSendDisassocFrameThresholdTimer, |
| "Disassoc throttle TIMEOUT", |
| limSendDisassocFrameThresholdHandler, |
| SIR_LIM_HASH_MISS_THRES_TIMEOUT, |
| cfgValue, |
| cfgValue, |
| TX_AUTO_ACTIVATE) != TX_SUCCESS) |
| { |
| /// Could not start Send Disassociate Frame Threshold timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("create Disassociate throttle timer failed")); |
| goto err_timer; |
| } |
| PELOG1(limLog(pMac, LOG1, |
| FL("Created Disassociate throttle timer "));) |
| |
| /** |
| * Create keepalive timer and activate it right away for AP role |
| */ |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_KEEPALIVE_TIMEOUT, |
| &cfgValue) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get keepalive timeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve keepalive timeout value")); |
| } |
| |
| // A value of zero implies keep alive should be disabled |
| if (cfgValue == 0) |
| { |
| cfgValue = LIM_KEEPALIVE_TIMER_MS; |
| pMac->sch.keepAlive = 0; |
| } else |
| pMac->sch.keepAlive = 1; |
| |
| |
| cfgValue = SYS_MS_TO_TICKS(cfgValue + SYS_TICK_DUR_MS - 1); |
| |
| if (tx_timer_create(&pMac->lim.limTimers.gLimKeepaliveTimer, |
| "KEEPALIVE_TIMEOUT", |
| limKeepaliveTmerHandler, |
| 0, |
| cfgValue, |
| cfgValue, |
| (pMac->lim.gLimSystemRole == eLIM_AP_ROLE) ? |
| TX_AUTO_ACTIVATE : TX_NO_ACTIVATE) |
| != TX_SUCCESS) |
| { |
| // Cannot create keepalive timer. Log error. |
| limLog(pMac, LOGP, FL("Cannot create keepalive timer.")); |
| goto err_timer; |
| } |
| |
| /** |
| * Create all CNF_WAIT Timers upfront |
| */ |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_WT_CNF_TIMEOUT, |
| &cfgValue) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get CNF_WAIT timeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve CNF timeout value")); |
| } |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| |
| for (i=0; i<pMac->lim.maxStation; i++) |
| { |
| if (tx_timer_create(&pMac->lim.limTimers.gpLimCnfWaitTimer[i], |
| "CNF_MISS_TIMEOUT", |
| limCnfWaitTmerHandler, |
| (tANI_U32)i, |
| cfgValue, |
| 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| // Cannot create timer. Log error. |
| limLog(pMac, LOGP, FL("Cannot create CNF wait timer.")); |
| goto err_timer; |
| } |
| } |
| |
| /* |
| ** Alloc and init table for the preAuth timer list |
| ** |
| **/ |
| |
| // get max number of Preauthentication |
| if (wlan_cfgGetInt(pMac, WNI_CFG_MAX_NUM_PRE_AUTH, |
| &cfgValue) != eSIR_SUCCESS) |
| { |
| /* |
| ** Could not get max preauth value |
| ** from CFG. Log error. |
| **/ |
| limLog(pMac, LOGP, |
| FL("could not retrieve mac preauth value")); |
| } |
| pMac->lim.gLimPreAuthTimerTable.numEntry = cfgValue; |
| if (palAllocateMemory(pMac->hHdd, (void **) &pMac->lim.gLimPreAuthTimerTable.pTable, |
| cfgValue*sizeof(tLimPreAuthNode)) != eHAL_STATUS_SUCCESS) |
| { |
| limLog(pMac, LOGP, FL("palAllocateMemory failed!")); |
| goto err_timer; |
| } |
| |
| limInitPreAuthTimerTable(pMac, &pMac->lim.gLimPreAuthTimerTable); |
| PELOG1(limLog(pMac, LOG1, FL("alloc and init table for preAuth timers"));) |
| |
| |
| { |
| /** |
| * Create OLBC cache aging timer |
| */ |
| if (wlan_cfgGetInt(pMac, WNI_CFG_OLBC_DETECT_TIMEOUT, |
| &cfgValue) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get OLBC detect timeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve OLBD detect timeout value")); |
| } |
| |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| |
| if (tx_timer_create( |
| &pMac->lim.limTimers.gLimUpdateOlbcCacheTimer, |
| "OLBC UPDATE CACHE TIMEOUT", |
| limUpdateOlbcCacheTimerHandler, |
| SIR_LIM_UPDATE_OLBC_CACHEL_TIMEOUT, |
| cfgValue, |
| cfgValue, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| // Cannot create update OLBC cache timer |
| // Log error |
| limLog(pMac, LOGP, FL("Cannot create update OLBC cache timer")); |
| goto err_timer; |
| } |
| } |
| #ifdef WLAN_FEATURE_VOWIFI_11R |
| // In future we need to use the auth timer, cause |
| // the pre auth session will be introduced before sending |
| // Auth frame. |
| // We need to go off channel and come back to home channel |
| cfgValue = 1000; |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| |
| if (tx_timer_create(&pMac->lim.limTimers.gLimFTPreAuthRspTimer, |
| "FT PREAUTH RSP TIMEOUT", |
| limTimerHandler, SIR_LIM_FT_PREAUTH_RSP_TIMEOUT, |
| cfgValue, 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| // Could not create Join failure timer. |
| // Log error |
| limLog(pMac, LOGP, FL("could not create Join failure timer")); |
| goto err_timer; |
| } |
| #endif |
| |
| #ifdef FEATURE_WLAN_CCX |
| cfgValue = 5000; |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| |
| if (tx_timer_create(&pMac->lim.limTimers.gLimCcxTsmTimer, |
| "CCX TSM Stats TIMEOUT", |
| limTimerHandler, SIR_LIM_CCX_TSM_TIMEOUT, |
| cfgValue, 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| // Could not create Join failure timer. |
| // Log error |
| limLog(pMac, LOGP, FL("could not create Join failure timer")); |
| goto err_timer; |
| } |
| #endif |
| |
| cfgValue = 1000; |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| if (tx_timer_create(&pMac->lim.limTimers.gLimRemainOnChannelTimer, |
| "FT PREAUTH RSP TIMEOUT", |
| limTimerHandler, SIR_LIM_REMAIN_CHN_TIMEOUT, |
| cfgValue, 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| // Could not create Join failure timer. |
| // Log error |
| limLog(pMac, LOGP, FL("could not create Join failure timer")); |
| goto err_timer; |
| } |
| |
| |
| cfgValue = 1000; |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| if (tx_timer_create(&pMac->lim.limTimers.gLimDisassocAckTimer, |
| "DISASSOC ACK TIMEOUT", |
| limTimerHandler, SIR_LIM_DISASSOC_ACK_TIMEOUT, |
| cfgValue, 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| limLog(pMac, LOGP, FL("could not DISASSOC ACK TIMEOUT timer")); |
| goto err_timer; |
| } |
| |
| cfgValue = 1000; |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| if (tx_timer_create(&pMac->lim.limTimers.gLimDeauthAckTimer, |
| "DISASSOC ACK TIMEOUT", |
| limTimerHandler, SIR_LIM_DEAUTH_ACK_TIMEOUT, |
| cfgValue, 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| limLog(pMac, LOGP, FL("could not create DEAUTH ACK TIMEOUT timer")); |
| goto err_timer; |
| } |
| |
| cfgValue = LIM_INSERT_SINGLESHOTNOA_TIMEOUT_VALUE; // (> no of BI* no of TUs per BI * 1TU in msec + p2p start time offset*1 TU in msec = 2*100*1.024 + 5*1.024 = 204.8 + 5.12 = 209.20) |
| cfgValue = SYS_MS_TO_TICKS(cfgValue); |
| if (tx_timer_create(&pMac->lim.limTimers.gLimP2pSingleShotNoaInsertTimer, |
| "Single Shot NOA Insert timeout", |
| limTimerHandler, SIR_LIM_INSERT_SINGLESHOT_NOA_TIMEOUT, |
| cfgValue, 0, |
| TX_NO_ACTIVATE) != TX_SUCCESS) |
| { |
| limLog(pMac, LOGP, FL("could not create Single Shot NOA Insert Timeout timer")); |
| goto err_timer; |
| } |
| |
| return TX_SUCCESS; |
| |
| err_timer: |
| tx_timer_delete(&pMac->lim.limTimers.gLimDeauthAckTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimDisassocAckTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimRemainOnChannelTimer); |
| #ifdef FEATURE_WLAN_CCX |
| tx_timer_delete(&pMac->lim.limTimers.gLimCcxTsmTimer); |
| #endif |
| tx_timer_delete(&pMac->lim.limTimers.gLimFTPreAuthRspTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimUpdateOlbcCacheTimer); |
| while(((tANI_S32)--i) >= 0) |
| { |
| tx_timer_delete(&pMac->lim.limTimers.gpLimCnfWaitTimer[i]); |
| } |
| tx_timer_delete(&pMac->lim.limTimers.gLimKeepaliveTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimSendDisassocFrameThresholdTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimBackgroundScanTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimProbeAfterHBTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimHeartBeatTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimAuthFailureTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimAddtsRspTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimReassocFailureTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimAssocFailureTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimJoinFailureTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimPeriodicJoinProbeReqTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimQuietBssTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimQuietTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimChannelSwitchTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimMaxChannelTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimPeriodicProbeReqTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimMinChannelTimer); |
| tx_timer_delete(&pMac->lim.limTimers.gLimP2pSingleShotNoaInsertTimer); |
| |
| if(NULL != pMac->lim.gLimPreAuthTimerTable.pTable) |
| palFreeMemory(pMac->hHdd, pMac->lim.gLimPreAuthTimerTable.pTable); |
| |
| return TX_TIMER_ERROR; |
| |
| } /****** end limCreateTimers() ******/ |
| |
| |
| |
| /** |
| * limTimerHandler() |
| * |
| *FUNCTION: |
| * This function is called upon |
| * 1. MIN_CHANNEL, MAX_CHANNEL timer expiration during scanning |
| * 2. JOIN_FAILURE timer expiration while joining a BSS |
| * 3. AUTH_FAILURE timer expiration while authenticating with a peer |
| * 4. Heartbeat timer expiration on STA |
| * 5. Background scan timer expiration on STA |
| * 6. AID release, Pre-auth cleanup and Link monitoring timer |
| * expiration on AP |
| * |
| *LOGIC: |
| * |
| *ASSUMPTIONS: |
| * NA |
| * |
| *NOTE: |
| * NA |
| * |
| * @param param - Message corresponding to the timer that expired |
| * |
| * @return None |
| */ |
| |
| void |
| limTimerHandler(void *pMacGlobal, tANI_U32 param) |
| { |
| tANI_U32 statusCode; |
| tSirMsgQ msg; |
| tpAniSirGlobal pMac = (tpAniSirGlobal)pMacGlobal; |
| |
| // Prepare and post message to LIM Message Queue |
| |
| msg.type = (tANI_U16) param; |
| msg.bodyptr = NULL; |
| msg.bodyval = 0; |
| |
| if ((statusCode = limPostMsgApi(pMac, &msg)) != eSIR_SUCCESS) |
| limLog(pMac, LOGE, |
| FL("posting message %X to LIM failed, reason=%d"), |
| msg.type, statusCode); |
| } /****** end limTimerHandler() ******/ |
| |
| |
| /** |
| * limAddtsResponseTimerHandler() |
| * |
| *FUNCTION: |
| * This function is called upon Addts response timer expiration on sta |
| * |
| *LOGIC: |
| * Message SIR_LIM_ADDTS_RSP_TIMEOUT is posted to gSirLimMsgQ |
| * when this function is executed. |
| * |
| *ASSUMPTIONS: |
| * NA |
| * |
| *NOTE: |
| * NA |
| * |
| * @param param - pointer to pre-auth node |
| * |
| * @return None |
| */ |
| |
| void |
| limAddtsResponseTimerHandler(void *pMacGlobal, tANI_U32 param) |
| { |
| tSirMsgQ msg; |
| tpAniSirGlobal pMac = (tpAniSirGlobal)pMacGlobal; |
| |
| // Prepare and post message to LIM Message Queue |
| |
| msg.type = SIR_LIM_ADDTS_RSP_TIMEOUT; |
| msg.bodyval = param; |
| msg.bodyptr = NULL; |
| |
| limPostMsgApi(pMac, &msg); |
| } /****** end limAuthResponseTimerHandler() ******/ |
| |
| |
| /** |
| * limAuthResponseTimerHandler() |
| * |
| *FUNCTION: |
| * This function is called upon Auth response timer expiration on AP |
| * |
| *LOGIC: |
| * Message SIR_LIM_AUTH_RSP_TIMEOUT is posted to gSirLimMsgQ |
| * when this function is executed. |
| * |
| *ASSUMPTIONS: |
| * NA |
| * |
| *NOTE: |
| * NA |
| * |
| * @param param - pointer to pre-auth node |
| * |
| * @return None |
| */ |
| |
| void |
| limAuthResponseTimerHandler(void *pMacGlobal, tANI_U32 param) |
| { |
| tSirMsgQ msg; |
| tpAniSirGlobal pMac = (tpAniSirGlobal)pMacGlobal; |
| |
| // Prepare and post message to LIM Message Queue |
| |
| msg.type = SIR_LIM_AUTH_RSP_TIMEOUT; |
| msg.bodyptr = NULL; |
| msg.bodyval = (tANI_U32)param; |
| |
| limPostMsgApi(pMac, &msg); |
| } /****** end limAuthResponseTimerHandler() ******/ |
| |
| |
| |
| /** |
| * limAssocFailureTimerHandler() |
| * |
| *FUNCTION: |
| * This function is called upon Re/Assoc failure timer expiration |
| * on STA |
| * |
| *LOGIC: |
| * Message SIR_LIM_ASSOC_FAIL_TIMEOUT is posted to gSirLimMsgQ |
| * when this function is executed. |
| * |
| *ASSUMPTIONS: |
| * NA |
| * |
| *NOTE: |
| * NA |
| * |
| * @param param - Indicates whether this is assoc or reassoc |
| * failure timeout |
| * @return None |
| */ |
| |
| void |
| limAssocFailureTimerHandler(void *pMacGlobal, tANI_U32 param) |
| { |
| tSirMsgQ msg; |
| tpAniSirGlobal pMac = (tpAniSirGlobal)pMacGlobal; |
| |
| #if defined (WLAN_FEATURE_VOWIFI_11R) || defined (FEATURE_WLAN_CCX) || defined(FEATURE_WLAN_LFR) |
| if((LIM_REASSOC == param) && |
| (NULL != pMac->lim.pSessionEntry)) |
| { |
| limLog(pMac, LOGE, FL("Reassoc timeout happened")); |
| if(pMac->lim.reAssocRetryAttempt < LIM_MAX_REASSOC_RETRY_LIMIT) |
| { |
| limSendRetryReassocReqFrame(pMac, pMac->lim.pSessionEntry->pLimMlmReassocRetryReq, pMac->lim.pSessionEntry); |
| pMac->lim.reAssocRetryAttempt++; |
| limLog(pMac, LOGW, FL("Reassoc request retry is sent %d times"), pMac->lim.reAssocRetryAttempt); |
| return; |
| } |
| else |
| { |
| limLog(pMac, LOGW, FL("Reassoc request retry MAX(%d) reached"), LIM_MAX_REASSOC_RETRY_LIMIT); |
| if(NULL != pMac->lim.pSessionEntry->pLimMlmReassocRetryReq) |
| { |
| palFreeMemory( pMac->hHdd, pMac->lim.pSessionEntry->pLimMlmReassocRetryReq); |
| pMac->lim.pSessionEntry->pLimMlmReassocRetryReq = NULL; |
| } |
| } |
| } |
| #endif |
| // Prepare and post message to LIM Message Queue |
| |
| msg.type = SIR_LIM_ASSOC_FAIL_TIMEOUT; |
| msg.bodyval = (tANI_U32)param; |
| msg.bodyptr = NULL; |
| |
| limPostMsgApi(pMac, &msg); |
| } /****** end limAssocFailureTimerHandler() ******/ |
| |
| |
| /** |
| * limUpdateOlbcCacheTimerHandler() |
| * |
| *FUNCTION: |
| * This function is called upon update olbc cache timer expiration |
| * on STA |
| * |
| *LOGIC: |
| * Message SIR_LIM_UPDATE_OLBC_CACHEL_TIMEOUT is posted to gSirLimMsgQ |
| * when this function is executed. |
| * |
| *ASSUMPTIONS: |
| * NA |
| * |
| *NOTE: |
| * NA |
| * |
| * @param |
| * |
| * @return None |
| */ |
| void |
| limUpdateOlbcCacheTimerHandler(void *pMacGlobal, tANI_U32 param) |
| { |
| tSirMsgQ msg; |
| tpAniSirGlobal pMac = (tpAniSirGlobal)pMacGlobal; |
| |
| // Prepare and post message to LIM Message Queue |
| |
| msg.type = SIR_LIM_UPDATE_OLBC_CACHEL_TIMEOUT; |
| msg.bodyval = 0; |
| msg.bodyptr = NULL; |
| |
| limPostMsgApi(pMac, &msg); |
| } /****** end limUpdateOlbcCacheTimerHandler() ******/ |
| |
| /** |
| * limDeactivateAndChangeTimer() |
| * |
| *FUNCTION: |
| * This function is called to deactivate and change a timer |
| * for future re-activation |
| * |
| *LOGIC: |
| * |
| *ASSUMPTIONS: |
| * NA |
| * |
| *NOTE: |
| * NA |
| * |
| * @param pMac - Pointer to Global MAC structure |
| * @param timerId - enum of timer to be deactivated and changed |
| * This enum is defined in limUtils.h file |
| * |
| * @return None |
| */ |
| |
| void |
| limDeactivateAndChangeTimer(tpAniSirGlobal pMac, tANI_U32 timerId) |
| { |
| tANI_U32 val=0, val1=0; |
| |
| MTRACE(macTrace(pMac, TRACE_CODE_TIMER_DEACTIVATE, NO_SESSION, timerId)); |
| |
| switch (timerId) |
| { |
| case eLIM_ADDTS_RSP_TIMER: |
| pMac->lim.gLimAddtsRspTimerCount++; |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimAddtsRspTimer) != TX_SUCCESS) |
| { |
| // Could not deactivate AddtsRsp Timer |
| // Log error |
| limLog(pMac, LOGP, |
| FL("Unable to deactivate AddtsRsp timer")); |
| } |
| break; |
| |
| case eLIM_MIN_CHANNEL_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimMinChannelTimer) |
| != TX_SUCCESS) |
| { |
| // Could not deactivate min channel timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("Unable to deactivate min channel timer")); |
| } |
| |
| #if 0 |
| // If a background was triggered via Quiet BSS, |
| // then we need to adjust the MIN and MAX channel |
| // timer's accordingly to the Quiet duration that |
| // was specified |
| if( eLIM_QUIET_RUNNING == pMac->lim.gLimSpecMgmt.quietState && |
| pMac->lim.gLimTriggerBackgroundScanDuringQuietBss ) |
| { |
| // gLimQuietDuration is already cached in units of |
| // system ticks. No conversion is reqd... |
| val = pMac->lim.gLimSpecMgmt.quietDuration; |
| } |
| else |
| { |
| #endif |
| if(pMac->lim.gpLimMlmScanReq) |
| { |
| val = SYS_MS_TO_TICKS(pMac->lim.gpLimMlmScanReq->minChannelTime); |
| if (pMac->btc.btcScanCompromise) |
| { |
| if (pMac->lim.gpLimMlmScanReq->minChannelTimeBtc) |
| { |
| val = SYS_MS_TO_TICKS(pMac->lim.gpLimMlmScanReq->minChannelTimeBtc); |
| limLog(pMac, LOG1, FL("Using BTC Min Active Scan time")); |
| } |
| else |
| { |
| limLog(pMac, LOGE, FL("BTC Active Scan Min Time is Not Set")); |
| } |
| } |
| } |
| else |
| { |
| limLog(pMac, LOGE, FL(" gpLimMlmScanReq is NULL ")); |
| //No need to change min timer. This is not a scan |
| break; |
| } |
| #if 0 |
| } |
| #endif |
| |
| if (tx_timer_change(&pMac->lim.limTimers.gLimMinChannelTimer, |
| val, 0) != TX_SUCCESS) |
| { |
| // Could not change min channel timer. |
| // Log error |
| limLog(pMac, LOGP, FL("Unable to change min channel timer")); |
| } |
| |
| break; |
| |
| case eLIM_PERIODIC_PROBE_REQ_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimPeriodicProbeReqTimer) |
| != TX_SUCCESS) |
| { |
| // Could not deactivate min channel timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("Unable to deactivate periodic timer")); |
| } |
| |
| val = SYS_MS_TO_TICKS(pMac->lim.gpLimMlmScanReq->minChannelTime)/2; |
| if (pMac->btc.btcScanCompromise) |
| { |
| if (pMac->lim.gpLimMlmScanReq->minChannelTimeBtc) |
| { |
| val = SYS_MS_TO_TICKS(pMac->lim.gpLimMlmScanReq->minChannelTimeBtc)/2; |
| } |
| else |
| { |
| limLog(pMac, LOGE, FL("BTC Active Scan Min Time is Not Set")); |
| } |
| } |
| if (tx_timer_change(&pMac->lim.limTimers.gLimPeriodicProbeReqTimer, |
| val, 0) != TX_SUCCESS) |
| { |
| // Could not change min channel timer. |
| // Log error |
| limLog(pMac, LOGP, FL("Unable to change periodic timer")); |
| } |
| |
| break; |
| |
| case eLIM_MAX_CHANNEL_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimMaxChannelTimer) |
| != TX_SUCCESS) |
| { |
| // Could not deactivate max channel timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("Unable to deactivate max channel timer")); |
| } |
| |
| // If a background was triggered via Quiet BSS, |
| // then we need to adjust the MIN and MAX channel |
| // timer's accordingly to the Quiet duration that |
| // was specified |
| if (pMac->lim.gLimSystemRole != eLIM_AP_ROLE) |
| { |
| #if 0 |
| |
| if( eLIM_QUIET_RUNNING == pMac->lim.gLimSpecMgmt.quietState && |
| pMac->lim.gLimTriggerBackgroundScanDuringQuietBss ) |
| { |
| // gLimQuietDuration is already cached in units of |
| // system ticks. No conversion is reqd... |
| val = pMac->lim.gLimSpecMgmt.quietDuration; |
| } |
| else |
| { |
| #endif |
| if(pMac->lim.gpLimMlmScanReq) |
| { |
| val = SYS_MS_TO_TICKS(pMac->lim.gpLimMlmScanReq->maxChannelTime); |
| if (pMac->btc.btcScanCompromise) |
| { |
| if (pMac->lim.gpLimMlmScanReq->maxChannelTimeBtc) |
| { |
| val = SYS_MS_TO_TICKS(pMac->lim.gpLimMlmScanReq->maxChannelTimeBtc); |
| limLog(pMac, LOG1, FL("Using BTC Max Active Scan time")); |
| } |
| else |
| { |
| limLog(pMac, LOGE, FL("BTC Active Scan Max Time is Not Set")); |
| } |
| } |
| } |
| else |
| { |
| limLog(pMac, LOGE, FL(" gpLimMlmScanReq is NULL ")); |
| //No need to change max timer. This is not a scan |
| break; |
| } |
| #if 0 |
| } |
| #endif |
| } |
| |
| if (tx_timer_change(&pMac->lim.limTimers.gLimMaxChannelTimer, |
| val, 0) != TX_SUCCESS) |
| { |
| // Could not change max channel timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("Unable to change max channel timer")); |
| } |
| |
| break; |
| |
| case eLIM_JOIN_FAIL_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimJoinFailureTimer) |
| != TX_SUCCESS) |
| { |
| /** |
| * Could not deactivate Join Failure |
| * timer. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("Unable to deactivate Join Failure timer")); |
| } |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_JOIN_FAILURE_TIMEOUT, |
| &val) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get JoinFailureTimeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve JoinFailureTimeout value")); |
| } |
| val = SYS_MS_TO_TICKS(val); |
| |
| if (tx_timer_change(&pMac->lim.limTimers.gLimJoinFailureTimer, |
| val, 0) != TX_SUCCESS) |
| { |
| /** |
| * Could not change Join Failure |
| * timer. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("Unable to change Join Failure timer")); |
| } |
| |
| break; |
| |
| case eLIM_PERIODIC_JOIN_PROBE_REQ_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimPeriodicJoinProbeReqTimer) |
| != TX_SUCCESS) |
| { |
| // Could not deactivate periodic join req Times. |
| limLog(pMac, LOGP, |
| FL("Unable to deactivate periodic join request timer")); |
| } |
| |
| val = SYS_MS_TO_TICKS(LIM_JOIN_PROBE_REQ_TIMER_MS); |
| if (tx_timer_change(&pMac->lim.limTimers.gLimPeriodicJoinProbeReqTimer, |
| val, 0) != TX_SUCCESS) |
| { |
| // Could not change periodic join req times. |
| // Log error |
| limLog(pMac, LOGP, FL("Unable to change periodic join request timer")); |
| } |
| |
| break; |
| |
| case eLIM_AUTH_FAIL_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimAuthFailureTimer) |
| != TX_SUCCESS) |
| { |
| // Could not deactivate Auth failure timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("Unable to deactivate auth failure timer")); |
| } |
| |
| // Change timer to reactivate it in future |
| if (wlan_cfgGetInt(pMac, WNI_CFG_AUTHENTICATE_FAILURE_TIMEOUT, |
| &val) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get AuthFailureTimeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve AuthFailureTimeout value")); |
| } |
| val = SYS_MS_TO_TICKS(val); |
| |
| if (tx_timer_change(&pMac->lim.limTimers.gLimAuthFailureTimer, |
| val, 0) != TX_SUCCESS) |
| { |
| // Could not change Authentication failure timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("unable to change Auth failure timer")); |
| } |
| |
| break; |
| |
| case eLIM_ASSOC_FAIL_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimAssocFailureTimer) != |
| TX_SUCCESS) |
| { |
| // Could not deactivate Association failure timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("unable to deactivate Association failure timer")); |
| } |
| |
| // Change timer to reactivate it in future |
| if (wlan_cfgGetInt(pMac, WNI_CFG_ASSOCIATION_FAILURE_TIMEOUT, |
| &val) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get AssocFailureTimeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve AssocFailureTimeout value")); |
| } |
| val = SYS_MS_TO_TICKS(val); |
| |
| if (tx_timer_change(&pMac->lim.limTimers.gLimAssocFailureTimer, |
| val, 0) != TX_SUCCESS) |
| { |
| // Could not change Association failure timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("unable to change Assoc failure timer")); |
| } |
| |
| break; |
| |
| case eLIM_REASSOC_FAIL_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimReassocFailureTimer) != |
| TX_SUCCESS) |
| { |
| // Could not deactivate Reassociation failure timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("unable to deactivate Reassoc failure timer")); |
| } |
| |
| // Change timer to reactivate it in future |
| if (wlan_cfgGetInt(pMac, WNI_CFG_REASSOCIATION_FAILURE_TIMEOUT, |
| &val) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get ReassocFailureTimeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve ReassocFailureTimeout value")); |
| } |
| val = SYS_MS_TO_TICKS(val); |
| |
| if (tx_timer_change(&pMac->lim.limTimers.gLimReassocFailureTimer, |
| val, 0) != TX_SUCCESS) |
| { |
| // Could not change Reassociation failure timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("unable to change Reassociation failure timer")); |
| } |
| |
| break; |
| |
| case eLIM_HEART_BEAT_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimHeartBeatTimer) != |
| TX_SUCCESS) |
| { |
| // Could not deactivate Heartbeat timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("unable to deactivate Heartbeat timer")); |
| } |
| else |
| { |
| limLog(pMac, LOGW, FL("Deactivated heartbeat link monitoring")); |
| } |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_BEACON_INTERVAL, |
| &val) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get BEACON_INTERVAL value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve BEACON_INTERVAL value")); |
| } |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_HEART_BEAT_THRESHOLD, &val1) != |
| eSIR_SUCCESS) |
| limLog(pMac, LOGP, |
| FL("could not retrieve heartbeat failure value")); |
| |
| // Change timer to reactivate it in future |
| val = SYS_MS_TO_TICKS(val * val1); |
| |
| if (tx_timer_change(&pMac->lim.limTimers.gLimHeartBeatTimer, |
| val, 0) != TX_SUCCESS) |
| { |
| // Could not change HeartBeat timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("unable to change HeartBeat timer")); |
| } |
| else |
| { |
| limLog(pMac, LOGW, FL("HeartBeat timer value is changed = %lu"), val); |
| } |
| break; |
| |
| case eLIM_PROBE_AFTER_HB_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimProbeAfterHBTimer) != |
| TX_SUCCESS) |
| { |
| // Could not deactivate Heartbeat timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("unable to deactivate probeAfterHBTimer")); |
| } |
| else |
| { |
| limLog(pMac, LOGE, FL("Deactivated probe after hb timer")); |
| } |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_PROBE_AFTER_HB_FAIL_TIMEOUT, |
| &val) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get PROBE_AFTER_HB_FAILURE |
| * value from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve PROBE_AFTER_HB_FAIL_TIMEOUT value")); |
| } |
| |
| // Change timer to reactivate it in future |
| val = SYS_MS_TO_TICKS(val); |
| |
| if (tx_timer_change(&pMac->lim.limTimers.gLimProbeAfterHBTimer, |
| val, 0) != TX_SUCCESS) |
| { |
| // Could not change HeartBeat timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("unable to change ProbeAfterHBTimer")); |
| } |
| else |
| { |
| limLog(pMac, LOGW, FL("Probe after HB timer value is changed = %lu"), val); |
| } |
| |
| break; |
| |
| case eLIM_KEEPALIVE_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimKeepaliveTimer) |
| != TX_SUCCESS) |
| { |
| // Could not deactivate Keepalive timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("unable to deactivate KeepaliveTimer timer")); |
| } |
| |
| // Change timer to reactivate it in future |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_KEEPALIVE_TIMEOUT, |
| &val) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get keepalive timeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve keepalive timeout value")); |
| } |
| if (val == 0) |
| { |
| val = 3000; |
| pMac->sch.keepAlive = 0; |
| } else |
| pMac->sch.keepAlive = 1; |
| |
| |
| |
| val = SYS_MS_TO_TICKS(val + SYS_TICK_DUR_MS - 1); |
| |
| if (tx_timer_change(&pMac->lim.limTimers.gLimKeepaliveTimer, |
| val, val) != TX_SUCCESS) |
| { |
| // Could not change KeepaliveTimer timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("unable to change KeepaliveTimer timer")); |
| } |
| |
| break; |
| |
| case eLIM_BACKGROUND_SCAN_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimBackgroundScanTimer) |
| != TX_SUCCESS) |
| { |
| // Could not deactivate BackgroundScanTimer timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("unable to deactivate BackgroundScanTimer timer")); |
| } |
| |
| // Change timer to reactivate it in future |
| if (wlan_cfgGetInt(pMac, WNI_CFG_BACKGROUND_SCAN_PERIOD, |
| &val) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get Background scan period value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve Background scan period value")); |
| } |
| if (val == 0) |
| { |
| val = LIM_BACKGROUND_SCAN_PERIOD_DEFAULT_MS; |
| pMac->lim.gLimBackgroundScanDisable = true; |
| } |
| else |
| pMac->lim.gLimBackgroundScanDisable = false; |
| |
| val = SYS_MS_TO_TICKS(val); |
| |
| if (tx_timer_change(&pMac->lim.limTimers.gLimBackgroundScanTimer, |
| val, val) != TX_SUCCESS) |
| { |
| // Could not change BackgroundScanTimer timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("unable to change BackgroundScanTimer timer")); |
| } |
| |
| break; |
| |
| #if 0 |
| case eLIM_CHANNEL_SWITCH_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimChannelSwitchTimer) != eSIR_SUCCESS) |
| { |
| limLog(pMac, LOGP, FL("tx_timer_deactivate failed!")); |
| return; |
| } |
| |
| if (tx_timer_change(&pMac->lim.limTimers.gLimChannelSwitchTimer, |
| pMac->lim.gLimChannelSwitch.switchTimeoutValue, |
| 0) != TX_SUCCESS) |
| { |
| limLog(pMac, LOGP, FL("tx_timer_change failed ")); |
| return; |
| } |
| break; |
| #endif |
| |
| case eLIM_LEARN_DURATION_TIMER: |
| break; |
| |
| #if 0 |
| case eLIM_QUIET_BSS_TIMER: |
| if (TX_SUCCESS != |
| tx_timer_deactivate(&pMac->lim.limTimers.gLimQuietBssTimer)) |
| { |
| limLog( pMac, LOGE, |
| FL("Unable to de-activate gLimQuietBssTimer! Will attempt to activate anyway...")); |
| } |
| |
| // gLimQuietDuration appears to be in units of ticks |
| // Use it as is |
| if (TX_SUCCESS != |
| tx_timer_change( &pMac->lim.limTimers.gLimQuietBssTimer, |
| pMac->lim.gLimSpecMgmt.quietDuration, |
| 0)) |
| { |
| limLog( pMac, LOGE, |
| FL("Unable to change gLimQuietBssTimer! Will still attempt to activate anyway...")); |
| } |
| break; |
| |
| case eLIM_QUIET_TIMER: |
| if( TX_SUCCESS != tx_timer_deactivate(&pMac->lim.limTimers.gLimQuietTimer)) |
| { |
| limLog( pMac, LOGE, |
| FL( "Unable to deactivate gLimQuietTimer! Will still attempt to re-activate anyway..." )); |
| } |
| |
| // Set the NEW timeout value, in ticks |
| if( TX_SUCCESS != tx_timer_change( &pMac->lim.limTimers.gLimQuietTimer, |
| SYS_MS_TO_TICKS(pMac->lim.gLimSpecMgmt.quietTimeoutValue), 0)) |
| { |
| limLog( pMac, LOGE, |
| FL( "Unable to change gLimQuietTimer! Will still attempt to re-activate anyway..." )); |
| } |
| break; |
| #endif |
| |
| #if 0 |
| case eLIM_WPS_OVERLAP_TIMER: |
| { |
| // Restart Learn Interval timer |
| |
| tANI_U32 WPSOverlapTimer = SYS_MS_TO_TICKS(LIM_WPS_OVERLAP_TIMER_MS); |
| |
| if (tx_timer_deactivate( |
| &pMac->lim.limTimers.gLimWPSOverlapTimerObj.gLimWPSOverlapTimer) != TX_SUCCESS) |
| { |
| // Could not deactivate Learn Interval timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("Unable to deactivate WPS overlap timer")); |
| } |
| |
| if (tx_timer_change( |
| &pMac->lim.limTimers.gLimWPSOverlapTimerObj.gLimWPSOverlapTimer, |
| WPSOverlapTimer, 0) != TX_SUCCESS) |
| { |
| // Could not change Learn Interval timer. |
| // Log error |
| limLog(pMac, LOGP, FL("Unable to change WPS overlap timer")); |
| |
| return; |
| } |
| |
| limLog( pMac, LOGE, |
| FL("Setting WPS overlap TIMER to %d ticks"), |
| WPSOverlapTimer); |
| } |
| break; |
| #endif |
| |
| #ifdef WLAN_FEATURE_VOWIFI_11R |
| case eLIM_FT_PREAUTH_RSP_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimFTPreAuthRspTimer) != TX_SUCCESS) |
| { |
| /** |
| ** Could not deactivate Join Failure |
| ** timer. Log error. |
| **/ |
| limLog(pMac, LOGP, FL("Unable to deactivate Preauth response Failure timer")); |
| return; |
| } |
| val = 1000; |
| val = SYS_MS_TO_TICKS(val); |
| if (tx_timer_change(&pMac->lim.limTimers.gLimFTPreAuthRspTimer, |
| val, 0) != TX_SUCCESS) |
| { |
| /** |
| * Could not change Join Failure |
| * timer. Log error. |
| */ |
| limLog(pMac, LOGP, FL("Unable to change Join Failure timer")); |
| return; |
| } |
| break; |
| #endif |
| #ifdef FEATURE_WLAN_CCX |
| case eLIM_TSM_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimCcxTsmTimer) |
| != TX_SUCCESS) |
| { |
| limLog(pMac, LOGE, FL("Unable to deactivate TSM timer")); |
| } |
| break; |
| #endif |
| case eLIM_REMAIN_CHN_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimRemainOnChannelTimer) != TX_SUCCESS) |
| { |
| /** |
| ** Could not deactivate Join Failure |
| ** timer. Log error. |
| **/ |
| limLog(pMac, LOGP, FL("Unable to deactivate Remain on Chn timer")); |
| return; |
| } |
| val = 1000; |
| val = SYS_MS_TO_TICKS(val); |
| if (tx_timer_change(&pMac->lim.limTimers.gLimRemainOnChannelTimer, |
| val, 0) != TX_SUCCESS) |
| { |
| /** |
| * Could not change Join Failure |
| * timer. Log error. |
| */ |
| limLog(pMac, LOGP, FL("Unable to change timer")); |
| return; |
| } |
| break; |
| case eLIM_DISASSOC_ACK_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimDisassocAckTimer) != TX_SUCCESS) |
| { |
| /** |
| ** Could not deactivate Join Failure |
| ** timer. Log error. |
| **/ |
| limLog(pMac, LOGP, FL("Unable to deactivate Disassoc ack timer")); |
| return; |
| } |
| val = 1000; |
| val = SYS_MS_TO_TICKS(val); |
| if (tx_timer_change(&pMac->lim.limTimers.gLimDisassocAckTimer, |
| val, 0) != TX_SUCCESS) |
| { |
| /** |
| * Could not change Join Failure |
| * timer. Log error. |
| */ |
| limLog(pMac, LOGP, FL("Unable to change timer")); |
| return; |
| } |
| break; |
| |
| case eLIM_DEAUTH_ACK_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimDeauthAckTimer) != TX_SUCCESS) |
| { |
| /** |
| ** Could not deactivate Join Failure |
| ** timer. Log error. |
| **/ |
| limLog(pMac, LOGP, FL("Unable to deactivate Deauth ack timer")); |
| return; |
| } |
| val = 1000; |
| val = SYS_MS_TO_TICKS(val); |
| if (tx_timer_change(&pMac->lim.limTimers.gLimDeauthAckTimer, |
| val, 0) != TX_SUCCESS) |
| { |
| /** |
| * Could not change Join Failure |
| * timer. Log error. |
| */ |
| limLog(pMac, LOGP, FL("Unable to change timer")); |
| return; |
| } |
| break; |
| |
| case eLIM_INSERT_SINGLESHOT_NOA_TIMER: |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimP2pSingleShotNoaInsertTimer) != TX_SUCCESS) |
| { |
| /** |
| ** Could not deactivate SingleShot NOA Insert |
| ** timer. Log error. |
| **/ |
| limLog(pMac, LOGP, FL("Unable to deactivate SingleShot NOA Insert timer")); |
| return; |
| } |
| val = LIM_INSERT_SINGLESHOTNOA_TIMEOUT_VALUE; |
| val = SYS_MS_TO_TICKS(val); |
| if (tx_timer_change(&pMac->lim.limTimers.gLimP2pSingleShotNoaInsertTimer, |
| val, 0) != TX_SUCCESS) |
| { |
| /** |
| * Could not change Single Shot NOA Insert |
| * timer. Log error. |
| */ |
| limLog(pMac, LOGP, FL("Unable to change timer")); |
| return; |
| } |
| break; |
| |
| default: |
| // Invalid timerId. Log error |
| break; |
| } |
| } /****** end limDeactivateAndChangeTimer() ******/ |
| |
| |
| |
| /**--------------------------------------------------------------- |
| \fn limHeartBeatDeactivateAndChangeTimer |
| \brief This function deactivates and changes the heart beat |
| \ timer, eLIM_HEART_BEAT_TIMER. |
| \ |
| \param pMac |
| \param psessionEntry |
| \return None |
| ------------------------------------------------------------------*/ |
| void |
| limHeartBeatDeactivateAndChangeTimer(tpAniSirGlobal pMac, tpPESession psessionEntry) |
| { |
| tANI_U32 val, val1; |
| |
| MTRACE(macTrace(pMac, TRACE_CODE_TIMER_DEACTIVATE, psessionEntry->peSessionId, eLIM_HEART_BEAT_TIMER)); |
| #ifdef WLAN_ACTIVEMODE_OFFLOAD_FEATURE |
| if(IS_ACTIVEMODE_OFFLOAD_FEATURE_ENABLE) |
| return; |
| #endif |
| |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gLimHeartBeatTimer) != TX_SUCCESS) |
| limLog(pMac, LOGP, FL("Fail to deactivate HeartBeatTimer ")); |
| |
| /* HB Timer sessionisation: In case of 2 or more sessions, the HB interval keeps |
| changing. to avoid this problem, HeartBeat interval is made constant, by |
| fixing beacon interval to 100ms immaterial of the beacon interval of the session */ |
| |
| //val = psessionEntry->beaconParams.beaconInterval; |
| val = LIM_HB_TIMER_BEACON_INTERVAL; |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_HEART_BEAT_THRESHOLD, &val1) != eSIR_SUCCESS) |
| limLog(pMac, LOGP, FL("Fail to get WNI_CFG_HEART_BEAT_THRESHOLD ")); |
| |
| PELOGW(limLog(pMac,LOGW, |
| FL("HB Timer Int.=100ms * %d, Beacon Int.=%dms,Session Id=%d "), |
| val1, psessionEntry->beaconParams.beaconInterval, |
| psessionEntry->peSessionId);) |
| |
| // Change timer to reactivate it in future |
| val = SYS_MS_TO_TICKS(val * val1); |
| |
| if (tx_timer_change(&pMac->lim.limTimers.gLimHeartBeatTimer, val, 0) != TX_SUCCESS) |
| limLog(pMac, LOGP, FL("Fail to change HeartBeatTimer")); |
| |
| } /****** end limHeartBeatDeactivateAndChangeTimer() ******/ |
| |
| |
| /**--------------------------------------------------------------- |
| \fn limReactivateHeartBeatTimer |
| \brief This function s called to deactivate, change and |
| \ activate a timer. |
| \ |
| \param pMac - Pointer to Global MAC structure |
| \param psessionEntry |
| \return None |
| ------------------------------------------------------------------*/ |
| void |
| limReactivateHeartBeatTimer(tpAniSirGlobal pMac, tpPESession psessionEntry) |
| { |
| PELOG3(limLog(pMac, LOG3, FL("Rxed Heartbeat. Count=%d"), psessionEntry->LimRxedBeaconCntDuringHB);) |
| |
| #ifdef WLAN_ACTIVEMODE_OFFLOAD_FEATURE |
| if(IS_ACTIVEMODE_OFFLOAD_FEATURE_ENABLE) |
| { |
| limLog(pMac, LOGW, FL("Active offload feature is enabled, FW takes care of HB monitoring")); |
| return; |
| } |
| #endif |
| |
| limHeartBeatDeactivateAndChangeTimer(pMac, psessionEntry); |
| MTRACE(macTrace(pMac, TRACE_CODE_TIMER_ACTIVATE, psessionEntry->peSessionId, eLIM_HEART_BEAT_TIMER)); |
| |
| //only start the hearbeat-timer if the timeout value is non-zero |
| if(pMac->lim.limTimers.gLimHeartBeatTimer.initScheduleTimeInMsecs > 0) { |
| if (tx_timer_activate(&pMac->lim.limTimers.gLimHeartBeatTimer)!= TX_SUCCESS) |
| { |
| limLog(pMac, LOGP,FL("could not activate Heartbeat timer")); |
| } |
| limLog(pMac, LOGW, FL("Reactivated heartbeat link monitoring")); |
| limResetHBPktCount(psessionEntry); |
| } |
| |
| } /****** end limReactivateHeartBeatTimer() ******/ |
| |
| |
| /** |
| * limActivateHearBeatTimer() |
| * |
| * |
| * @brief: This function is called to activate heartbeat timer |
| * |
| *LOGIC: |
| * |
| *ASSUMPTIONS: |
| * NA |
| * |
| * @note staId for eLIM_AUTH_RSP_TIMER is auth Node Index. |
| * |
| * @param pMac - Pointer to Global MAC structure |
| * |
| * @return TX_SUCCESS - timer is activated |
| * errors - fail to start the timer |
| */ |
| v_UINT_t limActivateHearBeatTimer(tpAniSirGlobal pMac) |
| { |
| v_UINT_t status = TX_TIMER_ERROR; |
| |
| #ifdef WLAN_ACTIVEMODE_OFFLOAD_FEATURE |
| if(IS_ACTIVEMODE_OFFLOAD_FEATURE_ENABLE) |
| return (status); |
| #endif |
| |
| if(TX_AIRGO_TMR_SIGNATURE == pMac->lim.limTimers.gLimHeartBeatTimer.tmrSignature) |
| { |
| //consider 0 interval a ok case |
| if( pMac->lim.limTimers.gLimHeartBeatTimer.initScheduleTimeInMsecs ) |
| { |
| status = tx_timer_activate(&pMac->lim.limTimers.gLimHeartBeatTimer); |
| if( TX_SUCCESS != status ) |
| { |
| PELOGE(limLog(pMac, LOGE, |
| FL("could not activate Heartbeat timer status(%d)"), status);) |
| } |
| } |
| else |
| { |
| status = TX_SUCCESS; |
| } |
| } |
| |
| return (status); |
| } |
| |
| |
| |
| /** |
| * limDeactivateAndChangePerStaIdTimer() |
| * |
| * |
| * @brief: This function is called to deactivate and change a per STA timer |
| * for future re-activation |
| * |
| *LOGIC: |
| * |
| *ASSUMPTIONS: |
| * NA |
| * |
| * @note staId for eLIM_AUTH_RSP_TIMER is auth Node Index. |
| * |
| * @param pMac - Pointer to Global MAC structure |
| * @param timerId - enum of timer to be deactivated and changed |
| * This enum is defined in limUtils.h file |
| * @param staId - staId |
| * |
| * @return None |
| */ |
| |
| void |
| limDeactivateAndChangePerStaIdTimer(tpAniSirGlobal pMac, tANI_U32 timerId, tANI_U16 staId) |
| { |
| tANI_U32 val; |
| MTRACE(macTrace(pMac, TRACE_CODE_TIMER_DEACTIVATE, NO_SESSION, timerId)); |
| |
| switch (timerId) |
| { |
| case eLIM_CNF_WAIT_TIMER: |
| |
| if (tx_timer_deactivate(&pMac->lim.limTimers.gpLimCnfWaitTimer[staId]) |
| != TX_SUCCESS) |
| { |
| limLog(pMac, LOGP, |
| FL("unable to deactivate CNF wait timer")); |
| |
| } |
| |
| // Change timer to reactivate it in future |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_WT_CNF_TIMEOUT, |
| &val) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get cnf timeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve cnf timeout value")); |
| } |
| val = SYS_MS_TO_TICKS(val); |
| |
| if (tx_timer_change(&pMac->lim.limTimers.gpLimCnfWaitTimer[staId], |
| val, val) != TX_SUCCESS) |
| { |
| // Could not change cnf timer. |
| // Log error |
| limLog(pMac, LOGP, FL("unable to change cnf wait timer")); |
| } |
| |
| break; |
| |
| case eLIM_AUTH_RSP_TIMER: |
| { |
| tLimPreAuthNode *pAuthNode; |
| |
| pAuthNode = limGetPreAuthNodeFromIndex(pMac, &pMac->lim.gLimPreAuthTimerTable, staId); |
| |
| if (pAuthNode == NULL) |
| { |
| limLog(pMac, LOGP, FL("Invalid Pre Auth Index passed :%d"), staId); |
| break; |
| } |
| |
| if (tx_timer_deactivate(&pAuthNode->timer) != TX_SUCCESS) |
| { |
| // Could not deactivate auth response timer. |
| // Log error |
| limLog(pMac, LOGP, FL("unable to deactivate auth response timer")); |
| } |
| |
| // Change timer to reactivate it in future |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_AUTHENTICATE_RSP_TIMEOUT, &val) != eSIR_SUCCESS) |
| { |
| /** |
| * Could not get auth rsp timeout value |
| * from CFG. Log error. |
| */ |
| limLog(pMac, LOGP, |
| FL("could not retrieve auth response timeout value")); |
| } |
| |
| val = SYS_MS_TO_TICKS(val); |
| |
| if (tx_timer_change(&pAuthNode->timer, val, 0) != TX_SUCCESS) |
| { |
| // Could not change auth rsp timer. |
| // Log error |
| limLog(pMac, LOGP, FL("unable to change auth rsp timer")); |
| } |
| } |
| break; |
| |
| |
| default: |
| // Invalid timerId. Log error |
| break; |
| |
| } |
| } |
| |
| |
| /** |
| * limActivateCnfTimer() |
| * |
| *FUNCTION: |
| * This function is called to activate a per STA timer |
| * |
| *LOGIC: |
| * |
| *ASSUMPTIONS: |
| * NA |
| * |
| *NOTE: |
| * NA |
| * |
| * @param pMac - Pointer to Global MAC structure |
| * @param StaId - staId |
| * |
| * @return None |
| */ |
| |
| void limActivateCnfTimer(tpAniSirGlobal pMac, tANI_U16 staId, tpPESession psessionEntry) |
| { |
| MTRACE(macTrace(pMac, TRACE_CODE_TIMER_ACTIVATE, psessionEntry->peSessionId, eLIM_CNF_WAIT_TIMER)); |
| pMac->lim.limTimers.gpLimCnfWaitTimer[staId].sessionId = psessionEntry->peSessionId; |
| if (tx_timer_activate(&pMac->lim.limTimers.gpLimCnfWaitTimer[staId]) |
| != TX_SUCCESS) |
| { |
| limLog(pMac, LOGP, |
| FL("could not activate cnf wait timer")); |
| } |
| } |
| |
| /** |
| * limActivateAuthRspTimer() |
| * |
| *FUNCTION: |
| * This function is called to activate a per STA timer |
| * |
| *LOGIC: |
| * |
| *ASSUMPTIONS: |
| * NA |
| * |
| *NOTE: |
| * NA |
| * |
| * @param pMac - Pointer to Global MAC structure |
| * @param id - id |
| * |
| * @return None |
| */ |
| |
| void limActivateAuthRspTimer(tpAniSirGlobal pMac, tLimPreAuthNode *pAuthNode) |
| { |
| MTRACE(macTrace(pMac, TRACE_CODE_TIMER_ACTIVATE, NO_SESSION, eLIM_AUTH_RESP_TIMER)); |
| if (tx_timer_activate(&pAuthNode->timer) != TX_SUCCESS) |
| { |
| /// Could not activate auth rsp timer. |
| // Log error |
| limLog(pMac, LOGP, |
| FL("could not activate auth rsp timer")); |
| } |
| } |
| |
| |
| /** |
| * limSendDisassocFrameThresholdHandler() |
| * |
| *FUNCTION: |
| * This function reloads the credit to the send disassociate frame bucket |
| * |
| *LOGIC: |
| * |
| *ASSUMPTIONS: |
| * |
| *NOTE: |
| * NA |
| * |
| * @param |
| * |
| * @return None |
| */ |
| |
| void |
| limSendDisassocFrameThresholdHandler(void *pMacGlobal, tANI_U32 param) |
| { |
| tSirMsgQ msg; |
| tANI_U32 statusCode; |
| tpAniSirGlobal pMac = (tpAniSirGlobal)pMacGlobal; |
| |
| msg.type = SIR_LIM_HASH_MISS_THRES_TIMEOUT; |
| msg.bodyval = 0; |
| msg.bodyptr = NULL; |
| |
| if ((statusCode = limPostMsgApi(pMac, &msg)) != eSIR_SUCCESS) |
| limLog(pMac, LOGE, |
| FL("posting to LIM failed, reason=%d"), statusCode); |
| |
| } |
| |
| /** |
| * limAssocCnfWaitTmerHandler() |
| * |
| *FUNCTION: |
| * This function post a message to send a disassociate frame out. |
| * |
| *LOGIC: |
| * |
| *ASSUMPTIONS: |
| * |
| *NOTE: |
| * NA |
| * |
| * @param |
| * |
| * @return None |
| */ |
| |
| void |
| limCnfWaitTmerHandler(void *pMacGlobal, tANI_U32 param) |
| { |
| tSirMsgQ msg; |
| tANI_U32 statusCode; |
| tpAniSirGlobal pMac = (tpAniSirGlobal)pMacGlobal; |
| |
| msg.type = SIR_LIM_CNF_WAIT_TIMEOUT; |
| msg.bodyval = (tANI_U32)param; |
| msg.bodyptr = NULL; |
| |
| if ((statusCode = limPostMsgApi(pMac, &msg)) != eSIR_SUCCESS) |
| limLog(pMac, LOGE, |
| FL("posting to LIM failed, reason=%d"), statusCode); |
| |
| } |
| |
| /** |
| * limKeepaliveTmerHandler() |
| * |
| *FUNCTION: |
| * This function post a message to send a NULL data frame. |
| * |
| *LOGIC: |
| * |
| *ASSUMPTIONS: |
| * |
| *NOTE: |
| * NA |
| * |
| * @param |
| * |
| * @return None |
| */ |
| |
| void |
| limKeepaliveTmerHandler(void *pMacGlobal, tANI_U32 param) |
| { |
| tSirMsgQ msg; |
| tANI_U32 statusCode; |
| tpAniSirGlobal pMac = (tpAniSirGlobal)pMacGlobal; |
| |
| msg.type = SIR_LIM_KEEPALIVE_TIMEOUT; |
| msg.bodyval = (tANI_U32)param; |
| msg.bodyptr = NULL; |
| |
| if ((statusCode = limPostMsgApi(pMac, &msg)) != eSIR_SUCCESS) |
| limLog(pMac, LOGE, |
| FL("posting to LIM failed, reason=%d"), statusCode); |
| |
| } |
| |
| void |
| limChannelSwitchTimerHandler(void *pMacGlobal, tANI_U32 param) |
| { |
| tSirMsgQ msg; |
| tpAniSirGlobal pMac = (tpAniSirGlobal)pMacGlobal; |
| |
| PELOG1(limLog(pMac, LOG1, |
| FL("ChannelSwitch Timer expired. Posting msg to LIM "));) |
| |
| msg.type = SIR_LIM_CHANNEL_SWITCH_TIMEOUT; |
| msg.bodyval = (tANI_U32)param; |
| msg.bodyptr = NULL; |
| |
| limPostMsgApi(pMac, &msg); |
| } |
| |
| void |
| limQuietTimerHandler(void *pMacGlobal, tANI_U32 param) |
| { |
| tSirMsgQ msg; |
| tpAniSirGlobal pMac = (tpAniSirGlobal)pMacGlobal; |
| |
| msg.type = SIR_LIM_QUIET_TIMEOUT; |
| msg.bodyval = (tANI_U32)param; |
| msg.bodyptr = NULL; |
| |
| PELOG1(limLog(pMac, LOG1, |
| FL("Post SIR_LIM_QUIET_TIMEOUT msg. "));) |
| limPostMsgApi(pMac, &msg); |
| } |
| |
| void |
| limQuietBssTimerHandler(void *pMacGlobal, tANI_U32 param) |
| { |
| tSirMsgQ msg; |
| tpAniSirGlobal pMac = (tpAniSirGlobal)pMacGlobal; |
| |
| msg.type = SIR_LIM_QUIET_BSS_TIMEOUT; |
| msg.bodyval = (tANI_U32)param; |
| msg.bodyptr = NULL; |
| PELOG1(limLog(pMac, LOG1, |
| FL("Post SIR_LIM_QUIET_BSS_TIMEOUT msg. "));) |
| limPostMsgApi(pMac, &msg); |
| } |
| #if 0 |
| void |
| limWPSOverlapTimerHandler(void *pMacGlobal, tANI_U32 param) |
| { |
| tSirMsgQ msg; |
| tpAniSirGlobal pMac = (tpAniSirGlobal)pMacGlobal; |
| |
| msg.type = SIR_LIM_WPS_OVERLAP_TIMEOUT; |
| msg.bodyval = (tANI_U32)param; |
| msg.bodyptr = NULL; |
| PELOG1(limLog(pMac, LOG1, |
| FL("Post SIR_LIM_WPS_OVERLAP_TIMEOUT msg. "));) |
| limPostMsgApi(pMac, &msg); |
| } |
| #endif |
| |
| #ifdef WLAN_ACTIVEMODE_OFFLOAD_FEATURE |
| /* ACTIVE_MODE_HB_OFFLOAD */ |
| /** |
| * limMissedBeaconInActiveMode() |
| * |
| *FUNCTION: |
| * This function handle beacon miss indication from FW |
| * in Active mode. |
| * |
| *LOGIC: |
| * |
| *ASSUMPTIONS: |
| * NA |
| * |
| *NOTE: |
| * NA |
| * |
| * @param param - Msg Type |
| * |
| * @return None |
| */ |
| void |
| limMissedBeaconInActiveMode(void *pMacGlobal, tpPESession psessionEntry) |
| { |
| tANI_U32 statusCode; |
| tSirMsgQ msg; |
| tpAniSirGlobal pMac = (tpAniSirGlobal)pMacGlobal; |
| |
| // Prepare and post message to LIM Message Queue |
| if(IS_ACTIVEMODE_OFFLOAD_FEATURE_ENABLE) |
| { |
| msg.type = (tANI_U16) SIR_LIM_HEART_BEAT_TIMEOUT; |
| msg.bodyptr = psessionEntry; |
| msg.bodyval = 0; |
| limLog(pMac, LOGE, |
| FL("Heartbeat failure from Riva")); |
| if ((statusCode = limPostMsgApi(pMac, &msg)) != eSIR_SUCCESS) |
| limLog(pMac, LOGE, |
| FL("posting message %X to LIM failed, reason=%d"), |
| msg.type, statusCode); |
| } |
| } |
| #endif |
