| /* |
| * Copyright (c) 2013, The Linux Foundation. All rights reserved. |
| * |
| * Previously licensed under the ISC license by Qualcomm Atheros, Inc. |
| * |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * This file was originally distributed by Qualcomm Atheros, Inc. |
| * under proprietary terms before Copyright ownership was assigned |
| * to the Linux Foundation. |
| */ |
| |
| /*=========================================================================== |
| |
| b a p A p i H C B B . C |
| |
| OVERVIEW: |
| |
| This software unit holds the implementation of the WLAN BAP modules |
| Host Controller and Baseband functions. |
| |
| The functions externalized by this module are to be called ONLY by other |
| WLAN modules (HDD) that properly register with the BAP Layer initially. |
| |
| DEPENDENCIES: |
| |
| Are listed for each API below. |
| |
| |
| Copyright (c) 2008 Qualcomm Technologies, Inc. |
| All Rights Reserved. |
| Qualcomm Technologies Confidential and Proprietary |
| ===========================================================================*/ |
| |
| /*=========================================================================== |
| |
| EDIT HISTORY FOR FILE |
| |
| |
| This section contains comments describing changes made to the module. |
| Notice that changes are listed in reverse chronological order. |
| |
| |
| $Header: /prj/qct/asw/engbuilds/scl/users02/jzmuda/Android/ampBlueZ_6/CORE/BAP/src/bapApiHCBB.c,v 1.7 2011/05/06 00:59:27 jzmuda Exp jzmuda $$DateTime$$Author: jzmuda $ |
| |
| |
| when who what, where, why |
| ---------- --- -------------------------------------------------------- |
| 2008-09-15 jez Created module |
| |
| ===========================================================================*/ |
| |
| /*---------------------------------------------------------------------------- |
| * Include Files |
| * -------------------------------------------------------------------------*/ |
| #include "vos_trace.h" |
| |
| // Pick up the sme callback registration API |
| #include "sme_Api.h" |
| |
| /* BT-AMP PAL API header file */ |
| #include "bapApi.h" |
| #include "bapInternal.h" |
| |
| //#define BAP_DEBUG |
| /*---------------------------------------------------------------------------- |
| * Preprocessor Definitions and Constants |
| * -------------------------------------------------------------------------*/ |
| |
| |
| /*---------------------------------------------------------------------------- |
| * Type Declarations |
| * -------------------------------------------------------------------------*/ |
| |
| /*---------------------------------------------------------------------------- |
| * Global Data Definitions |
| * -------------------------------------------------------------------------*/ |
| |
| /*---------------------------------------------------------------------------- |
| * Static Variable Definitions |
| * -------------------------------------------------------------------------*/ |
| |
| /*---------------------------------------------------------------------------- |
| * Static Function Declarations and Definitions |
| * -------------------------------------------------------------------------*/ |
| |
| /*---------------------------------------------------------------------------- |
| * Externalized Function Definitions |
| * -------------------------------------------------------------------------*/ |
| |
| /*---------------------------------------------------------------------------- |
| * Function Declarations and Documentation |
| * -------------------------------------------------------------------------*/ |
| |
| |
| /* Host Controller and Baseband Commands */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPReset() |
| |
| DESCRIPTION |
| Implements the actual HCI Reset command. |
| Produces an asynchronous command complete event. Through the |
| command complete callback. (I.E., (*tpWLAN_BAPEventCB).) |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPReset |
| ( |
| ptBtampHandle btampHandle |
| ) |
| { |
| VOS_STATUS vosStatus; |
| tBtampHCI_Event bapHCIEvent; /* This now encodes ALL event types */ |
| ptBtampContext btampContext = (ptBtampContext) btampHandle; |
| tHalHandle hHal = NULL; |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, "%s: btampHandle value: %p", __func__, btampHandle); |
| |
| /* Validate params */ |
| if (btampHandle == NULL) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_ERROR, |
| "btampHandle is NULL in %s", __func__); |
| |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| /* Perform a "reset" */ |
| hHal = VOS_GET_HAL_CB(btampContext->pvosGCtx); |
| if (NULL == hHal) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_ERROR, |
| "hHal is NULL in %s", __func__); |
| |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| //csrRoamDisconnect(); |
| /* To avoid sending Disassoc on STA interface */ |
| if( TRUE == btampContext->isBapSessionOpen ) |
| { |
| sme_RoamDisconnect(hHal, |
| btampContext->sessionId, |
| // Danlin, where are the richer reason codes? |
| // I want to be able to convey everything 802.11 supports... |
| eCSR_DISCONNECT_REASON_UNSPECIFIED); |
| } |
| |
| /* Need to reset the timers as well*/ |
| /* Connection Accept Timer interval*/ |
| btampContext->bapConnectionAcceptTimerInterval = WLANBAP_CONNECTION_ACCEPT_TIMEOUT; |
| /* Link Supervision Timer interval*/ |
| btampContext->bapLinkSupervisionTimerInterval = WLANBAP_LINK_SUPERVISION_TIMEOUT; |
| /* Logical Link Accept Timer interval*/ |
| btampContext->bapLogicalLinkAcceptTimerInterval = WLANBAP_LOGICAL_LINK_ACCEPT_TIMEOUT; |
| /* Best Effort Flush timer interval*/ |
| btampContext->bapBEFlushTimerInterval = WLANBAP_BE_FLUSH_TIMEOUT; |
| |
| |
| /* Form and immediately return the command complete event... */ |
| bapHCIEvent.bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| bapHCIEvent.u.btampCommandCompleteEvent.present = 1; |
| bapHCIEvent.u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| bapHCIEvent.u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_RESET_CMD; |
| bapHCIEvent.u.btampCommandCompleteEvent.cc_event.Reset.status |
| = WLANBAP_STATUS_SUCCESS; |
| |
| vosStatus = (*btampContext->pBapHCIEventCB) |
| ( |
| //btampContext->pHddHdl, /* this refers to the BSL per connection context */ |
| btampContext->pAppHdl, /* this refers the BSL per application context */ |
| &bapHCIEvent, /* This now encodes ALL event types */ |
| VOS_FALSE /* Flag to indicate assoc-specific event */ |
| ); |
| |
| return vosStatus; |
| } /* WLAN_BAPReset */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPSetEventMask() |
| |
| DESCRIPTION |
| Implements the actual HCI Set Event Mask command. There is no need for |
| a callback because when this call returns the action has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCISetEventMask: pointer to the "HCI Set Event Mask" Structure. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCISetEventMask is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPSetEventMask |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Set_Event_Mask_Cmd *pBapHCISetEventMask, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPSetEventMask */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPFlush() |
| |
| DESCRIPTION |
| Implements the actual HCI Flush command |
| Produces an asynchronous command complete event. Through the |
| event callback. And an asynchronous Flush occurred event. Also through the |
| event callback. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCIFlush: pointer to the "HCI Flush" Structure. |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIFlush is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPFlush |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Flush_Cmd *pBapHCIFlush |
| ) |
| { |
| VOS_STATUS vosStatus; |
| tBtampHCI_Event bapHCIEvent; /* This now encodes ALL event types */ |
| ptBtampContext btampContext = (ptBtampContext) btampHandle; |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, "%s: btampHandle value: %p", __func__, btampHandle); |
| |
| /* Validate params */ |
| if (btampHandle == NULL) { |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| /* Form and immediately return the command complete event... */ |
| bapHCIEvent.bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| bapHCIEvent.u.btampCommandCompleteEvent.present = 1; |
| bapHCIEvent.u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| bapHCIEvent.u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_FLUSH_CMD; |
| bapHCIEvent.u.btampCommandCompleteEvent.cc_event.Flush.status |
| = WLANBAP_STATUS_SUCCESS; |
| |
| vosStatus = (*btampContext->pBapHCIEventCB) |
| ( |
| //btampContext->pHddHdl, /* this refers to the BSL per connection context */ |
| btampContext->pAppHdl, /* this refers the BSL per application context */ |
| &bapHCIEvent, /* This now encodes ALL event types */ |
| VOS_FALSE /* Flag to indicate assoc-specific event */ |
| ); |
| |
| return vosStatus; |
| } /* WLAN_BAPFlush */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_EnhancedBAPFlush() |
| |
| DESCRIPTION |
| Implements the actual HCI Enhanced Flush command |
| Produces an asynchronous command complete event. Through the command status |
| event callback. And an asynchronous Enhanced Flush Complete event. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCIFlush: pointer to the "HCI Enhanced Flush" Structure. |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIFlush is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_EnhancedBAPFlush |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Enhanced_Flush_Cmd *pBapHCIFlush, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| |
| ) |
| { |
| VOS_STATUS vosStatus = VOS_STATUS_SUCCESS; |
| tBtampHCI_Event bapHCIEvent; /* This now encodes ALL event types */ |
| ptBtampContext btampContext; |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, "%s: btampHandle value: %p", __func__, btampHandle); |
| |
| /* Validate params */ |
| /* Validate params */ |
| if ((NULL == btampHandle) || (NULL == pBapHCIEvent)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid input parameters in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| btampContext = (ptBtampContext) btampHandle; |
| /* Form and return the command status event... */ |
| bapHCIEvent.bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_STATUS_EVENT; |
| bapHCIEvent.u.btampCommandStatusEvent.present = 1; |
| bapHCIEvent.u.btampCommandStatusEvent.num_hci_command_packets = 1; |
| bapHCIEvent.u.btampCommandStatusEvent.command_opcode |
| = BTAMP_TLV_HCI_ENHANCED_FLUSH_CMD; |
| bapHCIEvent.u.btampCommandStatusEvent.status = WLANBAP_STATUS_SUCCESS; |
| |
| /* Form and immediately return the command complete event... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_ENHANCED_FLUSH_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampEnhancedFlushCompleteEvent.present = 1; |
| pBapHCIEvent->u.btampEnhancedFlushCompleteEvent.log_link_handle = |
| pBapHCIFlush->log_link_handle; |
| |
| vosStatus = (*btampContext->pBapHCIEventCB) |
| ( |
| //btampContext->pHddHdl, /* this refers to the BSL per connection context */ |
| btampContext->pAppHdl, /* this refers the BSL per application context */ |
| &bapHCIEvent, /* This now encodes ALL event types */ |
| VOS_FALSE /* Flag to indicate assoc-specific event */ |
| ); |
| |
| return vosStatus; |
| } /* WLAN_EnhancedBAPFlush */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPReadConnectionAcceptTimeout() |
| |
| DESCRIPTION |
| Implements the actual HCI Read Connection Accept Timeout command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIReadConnectionAcceptTimeout is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPReadConnectionAcceptTimeout |
| ( |
| ptBtampHandle btampHandle, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including "Read" Command Complete */ |
| ) |
| { |
| ptBtampContext btampContext = (ptBtampContext) btampHandle; |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "%s: btampHandle value: %p", __func__, btampHandle); |
| |
| /* Validate params */ |
| if ((NULL == btampHandle) || (NULL == pBapHCIEvent)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid input parameters in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| /* Fill in the parameters for command complete event... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = TRUE; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_READ_CONNECTION_ACCEPT_TIMEOUT_CMD; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Connection_Accept_TO.status |
| = WLANBAP_STATUS_SUCCESS; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Connection_Accept_TO.connection_accept_timeout |
| = btampContext->bapConnectionAcceptTimerInterval; |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPReadConnectionAcceptTimeout */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPWriteConnectionAcceptTimeout() |
| |
| DESCRIPTION |
| Implements the actual HCI Write Connection Accept Timeout command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCIWriteConnectionAcceptTimeout: pointer to the "HCI Connection Accept Timeout" Structure. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIWriteConnectionAcceptTimeout is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPWriteConnectionAcceptTimeout |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Write_Connection_Accept_Timeout_Cmd *pBapHCIWriteConnectionAcceptTimeout, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| ptBtampContext btampContext = (ptBtampContext) btampHandle; |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "%s: btampHandle value: %p", __func__, btampHandle); |
| |
| /* Validate params */ |
| if ((NULL == btampHandle) || (NULL == pBapHCIWriteConnectionAcceptTimeout) |
| || (NULL == pBapHCIEvent)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid input parameters in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| /* Validate the allowed timeout interval range */ |
| if ((pBapHCIWriteConnectionAcceptTimeout->connection_accept_timeout > |
| WLANBAP_CON_ACCEPT_TIMEOUT_MAX_RANGE) || |
| (pBapHCIWriteConnectionAcceptTimeout->connection_accept_timeout < |
| WLANBAP_CON_ACCEPT_TIMEOUT_MIN_RANGE)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Out of range for connection accept timeout parameters in %s", |
| __func__); |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Write_Connection_Accept_TO.status |
| = WLANBAP_ERROR_INVALID_HCI_CMND_PARAM; |
| } |
| else |
| { |
| /* Save the Physical link connection accept timeout value */ |
| btampContext->bapConnectionAcceptTimerInterval = |
| pBapHCIWriteConnectionAcceptTimeout->connection_accept_timeout; |
| |
| /* Return status for command complete event */ |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Write_Connection_Accept_TO.status |
| = WLANBAP_STATUS_SUCCESS; |
| } |
| |
| /* Fill in the parameters for command complete event... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = TRUE; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_WRITE_CONNECTION_ACCEPT_TIMEOUT_CMD; |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPWriteConnectionAcceptTimeout */ |
| |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPReadLinkSupervisionTimeout() |
| |
| DESCRIPTION |
| Implements the actual HCI Read Link Supervision Timeout command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIReadLinkSupervisionTimeout is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPReadLinkSupervisionTimeout |
| ( |
| ptBtampHandle btampHandle, |
| /* Only 8 bits (phy_link_handle) of this log_link_handle are valid. */ |
| tBtampTLVHCI_Read_Link_Supervision_Timeout_Cmd *pBapHCIReadLinkSupervisionTimeout, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including "Read" Command Complete*/ |
| ) |
| { |
| ptBtampContext btampContext = (ptBtampContext) btampHandle; |
| v_U8_t phyLinkHandle; |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "%s: btampHandle value: %p", __func__, btampHandle); |
| |
| /* Validate params */ |
| if ((NULL == btampHandle) || (NULL == pBapHCIReadLinkSupervisionTimeout) || |
| (NULL == pBapHCIEvent)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid input parameters in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| /* Validate the phyiscal link handle extracted from |
| logical link handle (lower byte valid) */ |
| phyLinkHandle = (v_U8_t) pBapHCIReadLinkSupervisionTimeout->log_link_handle; |
| |
| if (phyLinkHandle != btampContext->phy_link_handle) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid Physical link handle in %s", __func__); |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Link_Supervision_TO.link_supervision_timeout |
| = 0x00; /* Invalid value */ |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Link_Supervision_TO.log_link_handle |
| = pBapHCIReadLinkSupervisionTimeout->log_link_handle; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Link_Supervision_TO.status |
| = WLANBAP_ERROR_INVALID_HCI_CMND_PARAM; |
| } |
| else |
| { |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Link_Supervision_TO.link_supervision_timeout |
| = btampContext->bapLinkSupervisionTimerInterval; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Link_Supervision_TO.log_link_handle |
| = pBapHCIReadLinkSupervisionTimeout->log_link_handle; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Link_Supervision_TO.status |
| = WLANBAP_STATUS_SUCCESS; |
| } |
| |
| /* Fill in the parameters for command complete event... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = TRUE; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_READ_LINK_SUPERVISION_TIMEOUT_CMD; |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPReadLinkSupervisionTimeout */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPWriteLinkSupervisionTimeout() |
| |
| DESCRIPTION |
| Implements the actual HCI Write Link Supervision Timeout command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCIWriteLinkSupervisionTimeout: pointer to the "HCI Link Supervision Timeout" Structure. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIWriteLinkSupervisionTimeout is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPWriteLinkSupervisionTimeout |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Write_Link_Supervision_Timeout_Cmd *pBapHCIWriteLinkSupervisionTimeout, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| ptBtampContext btampContext = (ptBtampContext) btampHandle; |
| v_U8_t phyLinkHandle; |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "%s: btampHandle value: %p", __func__, btampHandle); |
| |
| /* Validate params */ |
| if ((NULL == btampHandle) || (NULL == pBapHCIWriteLinkSupervisionTimeout) || |
| (NULL == pBapHCIEvent)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid input parameters in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| /* Validate the phyiscal link handle extracted from |
| logical link handle (lower byte valid) */ |
| phyLinkHandle = (v_U8_t) pBapHCIWriteLinkSupervisionTimeout->log_link_handle; |
| |
| if (phyLinkHandle != btampContext->phy_link_handle) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid Physical link handle in %s", __func__); |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Write_Link_Supervision_TO.log_link_handle |
| = pBapHCIWriteLinkSupervisionTimeout->log_link_handle; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Write_Link_Supervision_TO.status |
| = WLANBAP_ERROR_INVALID_HCI_CMND_PARAM; |
| } |
| else |
| { |
| /* Save the LS timeout interval */ |
| btampContext->bapLinkSupervisionTimerInterval = |
| pBapHCIWriteLinkSupervisionTimeout->link_supervision_timeout; |
| |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Write_Link_Supervision_TO.log_link_handle |
| = pBapHCIWriteLinkSupervisionTimeout->log_link_handle; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Write_Link_Supervision_TO.status |
| = WLANBAP_STATUS_SUCCESS; |
| } |
| |
| /* Fill in the parameters for command complete event... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = TRUE; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_WRITE_LINK_SUPERVISION_TIMEOUT_CMD; |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPWriteLinkSupervisionTimeout */ |
| |
| /* v3.0 Host Controller and Baseband Commands */ |
| |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPReadLogicalLinkAcceptTimeout() |
| |
| DESCRIPTION |
| Implements the actual HCI Read Logical Link Accept Timeout command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIReadLogicalLinkAcceptTimeout is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPReadLogicalLinkAcceptTimeout |
| ( |
| ptBtampHandle btampHandle, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including "Read" Command Complete*/ |
| ) |
| { |
| ptBtampContext btampContext = (ptBtampContext) btampHandle; |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "%s: btampHandle value: %p", __func__, btampHandle); |
| |
| /* Validate params */ |
| if ((NULL == btampHandle) || (NULL == pBapHCIEvent)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid input parameters in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| /* Fill in the parameters for command complete event... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = TRUE; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_READ_LOGICAL_LINK_ACCEPT_TIMEOUT_CMD; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Logical_Link_Accept_TO.status |
| = WLANBAP_STATUS_SUCCESS; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Logical_Link_Accept_TO.logical_link_accept_timeout |
| = btampContext->bapLogicalLinkAcceptTimerInterval; |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPReadLogicalLinkAcceptTimeout */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPWriteLogicalLinkAcceptTimeout() |
| |
| DESCRIPTION |
| Implements the actual HCI Write Logical Link Accept Timeout command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCIWriteLogicalLinkAcceptTimeout: pointer to the "HCI Logical Link Accept Timeout" Structure. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIWriteLogicalLinkAcceptTimeout is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPWriteLogicalLinkAcceptTimeout |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Write_Logical_Link_Accept_Timeout_Cmd *pBapHCIWriteLogicalLinkAcceptTimeout, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| ptBtampContext btampContext = (ptBtampContext) btampHandle; |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "%s: btampHandle value: %p", __func__, btampHandle); |
| |
| /* Validate params */ |
| if ((NULL == btampHandle) || (NULL == pBapHCIWriteLogicalLinkAcceptTimeout) |
| || (NULL == pBapHCIEvent)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid input parameters in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| /* Validate the allowed timeout interval range */ |
| if ((pBapHCIWriteLogicalLinkAcceptTimeout->logical_link_accept_timeout > |
| WLANBAP_CON_ACCEPT_TIMEOUT_MAX_RANGE) || |
| (pBapHCIWriteLogicalLinkAcceptTimeout->logical_link_accept_timeout < |
| WLANBAP_CON_ACCEPT_TIMEOUT_MIN_RANGE)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Out of range for logical connection accept timeout parameters in %s", |
| __func__); |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Write_Logical_Link_Accept_TO.status |
| = WLANBAP_ERROR_INVALID_HCI_CMND_PARAM; |
| } |
| else |
| { |
| /* Save the Physical link connection accept timeout value */ |
| btampContext->bapLogicalLinkAcceptTimerInterval = |
| pBapHCIWriteLogicalLinkAcceptTimeout->logical_link_accept_timeout; |
| |
| /* Return status for command complete event */ |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Write_Logical_Link_Accept_TO.status |
| = WLANBAP_STATUS_SUCCESS; |
| } |
| |
| /* Fill in the parameters for command complete event... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = TRUE; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_WRITE_LOGICAL_LINK_ACCEPT_TIMEOUT_CMD; |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPWriteLogicalLinkAcceptTimeout */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPSetEventMaskPage2() |
| |
| DESCRIPTION |
| Implements the actual HCI Set Event Mask Page 2 command. There is no need for |
| a callback because when this call returns the action has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCISetEventMaskPage2: pointer to the "HCI Set Event Mask Page 2" Structure. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCISetEventMaskPage2 is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPSetEventMaskPage2 |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Set_Event_Mask_Page_2_Cmd *pBapHCISetEventMaskPage2, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| ptBtampContext btampContext = (ptBtampContext) btampHandle; |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "%s: btampHandle value: %p", __func__, btampHandle); |
| |
| /* Validate params */ |
| if ((NULL == btampHandle) || (NULL == pBapHCISetEventMaskPage2) |
| || (NULL == pBapHCIEvent)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid input parameters in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| |
| /* Save away the event mask */ |
| vos_mem_copy( |
| btampContext->event_mask_page_2, |
| pBapHCISetEventMaskPage2->event_mask_page_2, |
| 8 ); |
| |
| /* Return status for command complete event */ |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Set_Event_Mask_Page_2.status |
| = WLANBAP_STATUS_SUCCESS; |
| |
| /* Fill in the parameters for command complete event... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = TRUE; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_SET_EVENT_MASK_PAGE_2_CMD; |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPSetEventMaskPage2 */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPReadLocationData() |
| |
| DESCRIPTION |
| Implements the actual HCI Read Location Data command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIReadLocationData is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPReadLocationData |
| ( |
| ptBtampHandle btampHandle, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including "Read" Command Complete*/ |
| ) |
| { |
| ptBtampContext btampContext; |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "%s: btampHandle value: %p", __func__, btampHandle); |
| |
| /* Validate params */ |
| if ((NULL == btampHandle) || (NULL == pBapHCIEvent)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid input parameters in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| btampContext = (ptBtampContext) btampHandle; |
| |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Location_Data.loc_domain_aware |
| = btampContext->btamp_Location_Data_Info.loc_domain_aware; |
| |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Location_Data.loc_options |
| = btampContext->btamp_Location_Data_Info.loc_options; |
| |
| vos_mem_copy( |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Location_Data.loc_domain, |
| btampContext->btamp_Location_Data_Info.loc_domain, |
| 3 ); |
| |
| /* Return status for command complete event */ |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Location_Data.status |
| = WLANBAP_STATUS_SUCCESS; |
| |
| /* Fill in the parameters for command complete event... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = TRUE; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_READ_LOCATION_DATA_CMD; |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPReadLocationData */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPWriteLocationData() |
| |
| DESCRIPTION |
| Implements the actual HCI Write Location Data command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCIWriteLocationData: pointer to the "HCI Write Location Data" Structure. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIWriteLocationData is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPWriteLocationData |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Write_Location_Data_Cmd *pBapHCIWriteLocationData, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| ptBtampContext btampContext; |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "%s: btampHandle value: %p", __func__, btampHandle); |
| |
| /* Validate params */ |
| if ((NULL == btampHandle) || (NULL == pBapHCIWriteLocationData) |
| || (NULL == pBapHCIEvent)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid input parameters in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| btampContext = (ptBtampContext) btampHandle; |
| |
| btampContext->btamp_Location_Data_Info.loc_domain_aware = |
| pBapHCIWriteLocationData->loc_domain_aware; |
| |
| btampContext->btamp_Location_Data_Info.loc_options = |
| pBapHCIWriteLocationData->loc_options; |
| |
| vos_mem_copy( |
| btampContext->btamp_Location_Data_Info.loc_domain, |
| pBapHCIWriteLocationData->loc_domain, |
| 3 ); |
| |
| /* Return status for command complete event */ |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Write_Location_Data.status |
| = WLANBAP_STATUS_SUCCESS; |
| |
| /* Fill in the parameters for command complete event... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = TRUE; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_WRITE_LOCATION_DATA_CMD; |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPWriteLocationData */ |
| |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPReadFlowControlMode() |
| |
| DESCRIPTION |
| Implements the actual HCI Read Flow Control Mode command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIReadFlowControlMode is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPReadFlowControlMode |
| ( |
| ptBtampHandle btampHandle, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including "Read" Command Complete*/ |
| ) |
| { |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "%s: btampHandle value: %p", __func__, btampHandle); |
| |
| /* Validate params */ |
| if ((NULL == btampHandle) || (NULL == pBapHCIEvent)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid input parameters in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| /* Fill in the parameters for command complete event... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = TRUE; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_READ_FLOW_CONTROL_MODE_CMD; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Flow_Control_Mode.status |
| = WLANBAP_STATUS_SUCCESS; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Flow_Control_Mode.flow_control_mode |
| = WLANBAP_FLOW_CONTROL_MODE_BLOCK_BASED; |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPReadFlowControlMode */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPWriteFlowControlMode() |
| |
| DESCRIPTION |
| Implements the actual HCI Write Flow Control Mode command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCIWriteFlowControlMode: pointer to the "HCI Write Flow Control Mode" Structure. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIWriteFlowControlMode is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPWriteFlowControlMode |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Write_Flow_Control_Mode_Cmd *pBapHCIWriteFlowControlMode, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPWriteFlowControlMode */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPReadBestEffortFlushTimeout() |
| |
| DESCRIPTION |
| Implements the actual HCI Read Best Effort Flush Timeout command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIReadBEFlushTO is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPReadBestEffortFlushTimeout |
| ( |
| ptBtampHandle btampHandle, |
| /* The log_link_hanlde identifies which logical link's BE TO*/ |
| tBtampTLVHCI_Read_Best_Effort_Flush_Timeout_Cmd *pBapHCIReadBEFlushTO, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including "Read" Command Complete*/ |
| ) |
| { |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPReadBestEffortFlushTimeout */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPWriteBestEffortFlushTimeout() |
| |
| DESCRIPTION |
| Implements the actual HCI Write Best Effort Flush TO command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCIWriteBEFlushTO: pointer to the "HCI Write BE Flush TO" Structure. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIWriteBEFlushTO is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPWriteBestEffortFlushTimeout |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Write_Best_Effort_Flush_Timeout_Cmd *pBapHCIWriteBEFlushTO, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPWriteBestEffortFlushTimeout */ |
| |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPSetShortRangeMode() |
| |
| DESCRIPTION |
| Implements the actual HCI Set Short Range Mode command. There is no need for |
| a callback because when this call returns the action has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCIShortRangeMode: pointer to the "HCI Set Short Range Mode" Structure. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIShortRangeMode is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPSetShortRangeMode |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Set_Short_Range_Mode_Cmd *pBapHCIShortRangeMode, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| ptBtampContext btampContext = (ptBtampContext) btampHandle; |
| BTAMPFSM_INSTANCEDATA_T *instanceVar = &(btampContext->bapPhysLinkMachine); |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "%s: btampHandle value: %p", __func__, btampHandle); |
| |
| /* Validate params */ |
| if ((NULL == btampHandle) || (NULL == pBapHCIEvent)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid input parameters in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| /* Validate the BAP state to accept the Short Range Mode set request; |
| SRM set requests are allowed only in CONNECTED state */ |
| |
| /* Form and return the command status event... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_STATUS_EVENT; |
| pBapHCIEvent->u.btampCommandStatusEvent.present = 1; |
| pBapHCIEvent->u.btampCommandStatusEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandStatusEvent.command_opcode |
| = BTAMP_TLV_HCI_SET_SHORT_RANGE_MODE_CMD; |
| |
| if (CONNECTED != instanceVar->stateVar) |
| { |
| /* Short Range Mode request in invalid state */ |
| pBapHCIEvent->u.btampCommandStatusEvent.status = |
| WLANBAP_ERROR_CMND_DISALLOWED; |
| return VOS_STATUS_SUCCESS; |
| } |
| else if (pBapHCIShortRangeMode->phy_link_handle != btampContext->phy_link_handle) |
| { |
| /* Invalid Physical link handle */ |
| pBapHCIEvent->u.btampCommandStatusEvent.status = |
| WLANBAP_ERROR_NO_CNCT; |
| return VOS_STATUS_SUCCESS; |
| } |
| else if (pBapHCIShortRangeMode->short_range_mode > 0x01) |
| { |
| /* Invalid mode requested */ |
| pBapHCIEvent->u.btampCommandStatusEvent.status = |
| WLANBAP_ERROR_INVALID_HCI_CMND_PARAM; |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| pBapHCIEvent->u.btampCommandStatusEvent.status = WLANBAP_STATUS_SUCCESS; |
| |
| /* Send the Command Status event (success) here, since Change Complete is next */ |
| (*btampContext->pBapHCIEventCB) |
| ( |
| btampContext->pHddHdl, /* this refers to the BSL per connection context */ |
| pBapHCIEvent, /* This now encodes ALL event types */ |
| VOS_FALSE /* Flag to indicate assoc-specific event */ |
| ); |
| |
| /* Format the Short Range Mode Complete event to return... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_SHORT_RANGE_MODE_CHANGE_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampShortRangeModeChangeCompleteEvent.present = 1; |
| |
| pBapHCIEvent->u.btampShortRangeModeChangeCompleteEvent.status = |
| WLANBAP_STATUS_SUCCESS; /* Assumption for now */ |
| |
| /* The input parameters will go out in the CC Event */ |
| pBapHCIEvent->u.btampShortRangeModeChangeCompleteEvent.phy_link_handle = |
| pBapHCIShortRangeMode->phy_link_handle; |
| |
| pBapHCIEvent->u.btampShortRangeModeChangeCompleteEvent.short_range_mode = |
| pBapHCIShortRangeMode->short_range_mode; /* Assumption for now */ |
| |
| /* If the requested setting is different from the current setting... */ |
| if (pBapHCIShortRangeMode->short_range_mode != btampContext->phy_link_srm) |
| { |
| /* ... then change the SRM according to the requested value. |
| * If the attempt fails, the assumptions above need to be corrected. |
| */ |
| #if 0 |
| // Suggested API, needs to be created |
| if (VOS_STATUS_SUCCESS != HALSetShortRangeMode(pBapHCIShortRangeMode->short_range_mode)) |
| #else |
| if (0) |
| #endif |
| { |
| pBapHCIEvent->u.btampShortRangeModeChangeCompleteEvent.status = |
| WLANBAP_ERROR_HARDWARE_FAILURE; |
| pBapHCIEvent->u.btampShortRangeModeChangeCompleteEvent.short_range_mode = |
| btampContext->phy_link_srm; /* Switch back to current value */ |
| } |
| else |
| { |
| /* Update the SRM setting for this physical link, since it worked */ |
| btampContext->phy_link_srm = pBapHCIShortRangeMode->short_range_mode; |
| } |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPSetShortRangeMode */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPVendorSpecificCmd0() |
| |
| DESCRIPTION |
| Implements the actual HCI Vendor Specific Command 0 (OGF 0x3f, OCF 0x0000). |
| There is no need for a callback because when this call returns the action has |
| been completed. |
| |
| The command is received when: |
| - The A2MP Create Phy Link Response has been rx'd by the Bluetooth stack (initiator) |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIEvent is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPVendorSpecificCmd0 |
| ( |
| ptBtampHandle btampHandle, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| ptBtampContext btampContext = (ptBtampContext) btampHandle; |
| BTAMPFSM_INSTANCEDATA_T *instanceVar = &(btampContext->bapPhysLinkMachine); |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "%s: btampHandle value: %p", __func__, btampHandle); |
| |
| /* Validate params */ |
| if ((NULL == btampHandle) || (NULL == pBapHCIEvent)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid input parameters in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| /* Validate the BAP state to accept the Vendor Specific Cmd 0: |
| this is only allowed for the BT_INITIATOR in the CONNECTING state */ |
| |
| /* Form and return the command status event... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_STATUS_EVENT; |
| pBapHCIEvent->u.btampCommandStatusEvent.present = 1; |
| pBapHCIEvent->u.btampCommandStatusEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandStatusEvent.command_opcode |
| = BTAMP_TLV_HCI_VENDOR_SPECIFIC_CMD_0; |
| |
| if ( (BT_INITIATOR != btampContext->BAPDeviceRole) || |
| (CONNECTING != instanceVar->stateVar) ) |
| { |
| /* Vendor Specific Command 0 happened in invalid state */ |
| pBapHCIEvent->u.btampCommandStatusEvent.status = |
| WLANBAP_ERROR_CMND_DISALLOWED; |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* Signal BT Coexistence code in firmware to prefer WLAN */ |
| WLANBAP_NeedBTCoexPriority(btampContext, 1); |
| |
| pBapHCIEvent->u.btampCommandStatusEvent.status = WLANBAP_STATUS_SUCCESS; |
| |
| /* Send the Command Status event (success) here, since Command Complete is next */ |
| (*btampContext->pBapHCIEventCB) |
| ( |
| btampContext->pHddHdl, /* this refers to the BSL per connection context */ |
| pBapHCIEvent, /* This now encodes ALL event types */ |
| VOS_FALSE /* Flag to indicate assoc-specific event */ |
| ); |
| |
| /* Format the Vendor Specific Command 0 Complete event to return... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_VENDOR_SPECIFIC_CMD_0; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Vendor_Specific_Cmd_0.status |
| = WLANBAP_STATUS_SUCCESS; |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPVendorSpecificCmd0 */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPVendorSpecificCmd1() |
| |
| DESCRIPTION |
| Implements the actual HCI Vendor Specific Command 1 (OGF 0x3f, OCF 0x0001). |
| There is no need for a callback because when this call returns the action has |
| been completed. |
| |
| The command is received when: |
| - HCI wants to enable testability |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIEvent is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPVendorSpecificCmd1 |
| ( |
| ptBtampHandle btampHandle, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| ptBtampContext btampContext = (ptBtampContext) btampHandle; |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "%s: btampHandle value: %p", __func__, btampHandle); |
| |
| /* Validate params */ |
| if ((NULL == btampHandle) || (NULL == pBapHCIEvent)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid input parameters in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| |
| btampContext->btamp_async_logical_link_create = TRUE; |
| |
| |
| /* Format the Vendor Specific Command 1 Complete event to return... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_VENDOR_SPECIFIC_CMD_1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Vendor_Specific_Cmd_1.status |
| = WLANBAP_STATUS_SUCCESS; |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPVendorSpecificCmd1 */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| DESCRIPTION |
| Callback registered with TL for BAP, this is required in order for |
| TL to inform BAP, that the flush operation requested has been completed. |
| |
| The registered reception callback is being triggered by TL whenever a |
| frame SIR_TL_HAL_FLUSH_AC_RSP is received by TL from HAL. |
| |
| PARAMETERS |
| |
| IN |
| pvosGCtx: pointer to the global vos context; a handle to TL's |
| or SME's control block can be extracted from its context |
| ucStaId: station identifier for the requested value |
| ucTid: identifier of the tspec |
| status: status of the Flush operation |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS WLANBAP_TLFlushCompCallback |
| ( |
| v_PVOID_t pvosGCtx, |
| v_U8_t ucStaId, |
| v_U8_t ucTID, |
| v_U8_t status |
| ) |
| { |
| |
| return VOS_STATUS_SUCCESS; |
| } // WLANBAP_TLFlushCompCallback |
| |
| |
| /* End of v3.0 Host Controller and Baseband Commands */ |
| |
| |
| |
| |
| |
