| /* |
| * Copyright (c) 2012-2014 The Linux Foundation. All rights reserved. |
| * |
| * Previously licensed under the ISC license by Qualcomm Atheros, Inc. |
| * |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * This file was originally distributed by Qualcomm Atheros, Inc. |
| * under proprietary terms before Copyright ownership was assigned |
| * to the Linux Foundation. |
| */ |
| |
| //------------------------------------------------------------------------------ |
| // Copyright (c) 2004-2012 Atheros Corporation. All rights reserved. |
| // $ATH_LICENSE_HOSTSDK0_C$ |
| //------------------------------------------------------------------------------ |
| //============================================================================== |
| // Author(s): ="Atheros" |
| //============================================================================== |
| |
| #ifndef __BMI_MSG_H__ |
| #define __BMI_MSG_H__ |
| |
| #ifndef ATH_TARGET |
| #include "athstartpack.h" |
| #endif |
| |
| /* |
| * Bootloader Messaging Interface (BMI) |
| * |
| * BMI is a very simple messaging interface used during initialization |
| * to read memory, write memory, execute code, and to define an |
| * application entry PC. |
| * |
| * It is used to download an application to AR6K, to provide |
| * patches to code that is already resident on AR6K, and generally |
| * to examine and modify state. The Host has an opportunity to use |
| * BMI only once during bootup. Once the Host issues a BMI_DONE |
| * command, this opportunity ends. |
| * |
| * The Host writes BMI requests to mailbox0, and reads BMI responses |
| * from mailbox0. BMI requests all begin with a command |
| * (see below for specific commands), and are followed by |
| * command-specific data. |
| * |
| * Flow control: |
| * The Host can only issue a command once the Target gives it a |
| * "BMI Command Credit", using AR6K Counter #4. As soon as the |
| * Target has completed a command, it issues another BMI Command |
| * Credit (so the Host can issue the next command). |
| * |
| * BMI handles all required Target-side cache flushing. |
| */ |
| |
| |
| /* Maximum data size used for BMI transfers */ |
| #define BMI_DATASZ_MAX 256 |
| |
| /* BMI Commands */ |
| |
| #define BMI_NO_COMMAND 0 |
| |
| #define BMI_DONE 1 |
| /* |
| * Semantics: Host is done using BMI |
| * Request format: |
| * A_UINT32 command (BMI_DONE) |
| * Response format: none |
| */ |
| |
| #define BMI_READ_MEMORY 2 |
| /* |
| * Semantics: Host reads AR6K memory |
| * Request format: |
| * A_UINT32 command (BMI_READ_MEMORY) |
| * A_UINT32 address |
| * A_UINT32 length, at most BMI_DATASZ_MAX |
| * Response format: |
| * A_UINT8 data[length] |
| */ |
| |
| #define BMI_WRITE_MEMORY 3 |
| /* |
| * Semantics: Host writes AR6K memory |
| * Request format: |
| * A_UINT32 command (BMI_WRITE_MEMORY) |
| * A_UINT32 address |
| * A_UINT32 length, at most BMI_DATASZ_MAX |
| * A_UINT8 data[length] |
| * Response format: none |
| */ |
| /* |
| * Capbility to write "segmented files" is provided for two reasons |
| * 1) backwards compatibility for certain situations where Hosts |
| * have limited flexibility |
| * 2) because it's darn convenient. |
| * |
| * A segmented file consists of a file header followed by an arbitrary number |
| * of segments. Each segment contains segment metadata -- a Target address and |
| * a length -- followed by "length" bytes of data. A segmented file ends with |
| * a segment that specifies length=BMI_SGMTFILE_DONE. When a segmented file |
| * is sent to the Target, firmware writes each segment to the specified address. |
| * |
| * Special cases: |
| * 1) If a segment's metadata indicates length=BMI_SGMTFILE_EXEC, then the |
| * specified address is used as a function entry point for a brief function |
| * with prototype "(void *)(void)". That function is called immediately. |
| * After execution of the function completes, firmware continues with the |
| * next segment. No data is expected when length=BMI_SGMTFILE_EXEC. |
| * |
| * 2) If a segment's metadata indicates length=BMI_SGMTFILE_BEGINADDR, then |
| * the specified address is established as the application start address |
| * so that a subsequent BMI_DONE jumps there. |
| * |
| * 3) If a segment's metadata indicates length=BMI_SGMTFILE_BDDATA, then |
| * the specified address is used as the (possibly compressed) length of board |
| * data, which is loaded into the proper Target address as specified by |
| * hi_board_data. In addition, the hi_board_data_initialized flag is set. |
| * |
| * A segmented file is sent to the Target using a sequence of 1 or more |
| * BMI_WRITE_MEMORY commands. The first such command must have |
| * address=BMI_SEGMENTED_WRITE_ADDR. Subsequent BMI_WRITE_MEMORY commands |
| * can use an arbitrary address. In each BMI_WRITE_MEMORY command, the |
| * length specifies the number of data bytes transmitted (except for the |
| * special cases listed above). |
| * |
| * Alternatively, a segmented file may be sent to the Target using a |
| * BMI_LZ_STREAM_START command with address=BMI_SEGMENTED_WRITE_ADDR |
| * followed by a series of BMI_LZ_DATA commands that each send the next portion |
| * of the segmented file. |
| * |
| * The data segments may be lz77 compressed. In this case, the segmented file |
| * header flag, BMI_SGMTFILE_FLAG_COMPRESS, must be set. Note that segmented |
| * file METAdata is never compressed; only the data segments themselves are |
| * compressed. There is no way to mix compressed and uncompressed data segments |
| * in a single segmented file. Compressed (or uncompressed) segments are handled |
| * by both BMI_WRITE_MEMORY and by BMI_LZ_DATA commands. (Compression is an |
| * attribute of the segmented file rather than of the command used to transmit |
| * it.) |
| */ |
| #define BMI_SEGMENTED_WRITE_ADDR 0x1234 |
| |
| /* File header for a segmented file */ |
| struct bmi_segmented_file_header { |
| A_UINT32 magic_num; |
| A_UINT32 file_flags; |
| }; |
| #define BMI_SGMTFILE_MAGIC_NUM 0x544d4753 /* "SGMT" */ |
| #define BMI_SGMTFILE_FLAG_COMPRESS 1 |
| |
| /* Metadata for a segmented file segment */ |
| struct bmi_segmented_metadata { |
| A_UINT32 addr; |
| A_UINT32 length; |
| }; |
| /* Special values for bmi_segmented_metadata.length (all have high bit set) */ |
| #define BMI_SGMTFILE_DONE 0xffffffff /* end of segmented data */ |
| #define BMI_SGMTFILE_BDDATA 0xfffffffe /* Board Data segment */ |
| #define BMI_SGMTFILE_BEGINADDR 0xfffffffd /* set beginning address */ |
| #define BMI_SGMTFILE_EXEC 0xfffffffc /* immediate function execution */ |
| |
| #define BMI_EXECUTE 4 |
| /* |
| * Semantics: Causes AR6K to execute code |
| * Request format: |
| * A_UINT32 command (BMI_EXECUTE) |
| * A_UINT32 address |
| * A_UINT32 parameter |
| * Response format: |
| * A_UINT32 return value |
| */ |
| /* |
| * Note: In order to support the segmented file feature |
| * (see BMI_WRITE_MEMORY), when the address specified in a |
| * BMI_EXECUTE command matches (same physical address) |
| * BMI_SEGMENTED_WRITE_ADDR, it is ignored. Instead, execution |
| * begins at the address specified by hi_app_start. |
| */ |
| |
| #define BMI_SET_APP_START 5 |
| /* |
| * Semantics: Set Target application starting address |
| * Request format: |
| * A_UINT32 command (BMI_SET_APP_START) |
| * A_UINT32 address |
| * Response format: none |
| */ |
| |
| #define BMI_READ_SOC_REGISTER 6 |
| #define BMI_READ_SOC_WORD 6 |
| /* |
| * Semantics: Read a 32-bit Target SOC word. |
| * Request format: |
| * A_UINT32 command (BMI_READ_REGISTER) |
| * A_UINT32 address |
| * Response format: |
| * A_UINT32 value |
| */ |
| |
| #define BMI_WRITE_SOC_REGISTER 7 |
| #define BMI_WRITE_SOC_WORD 7 |
| /* |
| * Semantics: Write a 32-bit Target SOC word. |
| * Request format: |
| * A_UINT32 command (BMI_WRITE_REGISTER) |
| * A_UINT32 address |
| * A_UINT32 value |
| * |
| * Response format: none |
| */ |
| |
| #define BMI_GET_TARGET_ID 8 |
| #define BMI_GET_TARGET_INFO 8 |
| /* |
| * Semantics: Fetch the 4-byte Target information |
| * Request format: |
| * A_UINT32 command (BMI_GET_TARGET_ID/INFO) |
| * |
| * Response format1 (old firmware): |
| * A_UINT32 TargetVersionID |
| * |
| * Response format2 (intermediate firmware, during transition): |
| * A_UINT32 TARGET_VERSION_SENTINAL |
| * struct bmi_target_info; |
| * |
| * Response format3 (newest firmware) |
| * struct bmi_target_info; |
| */ |
| |
| PREPACK struct bmi_target_info { |
| A_UINT32 target_info_byte_count; /* size of this structure */ |
| A_UINT32 target_ver; /* Target Version ID */ |
| A_UINT32 target_type; /* Target type */ |
| } POSTPACK; |
| #define TARGET_VERSION_SENTINAL 0xffffffff |
| #define TARGET_TYPE_UNKNOWN 0 |
| #define TARGET_TYPE_AR6001 1 |
| #define TARGET_TYPE_AR6002 2 |
| #define TARGET_TYPE_AR6003 3 |
| #define TARGET_TYPE_AR6004 5 |
| #define TARGET_TYPE_AR6006 6 |
| #define TARGET_TYPE_AR9888 7 |
| #define TARGET_TYPE_AR6320 8 |
| #define TARGET_TYPE_AR900B 9 |
| /* For attach Peregrine 2.0 board target_reg_tbl only */ |
| #define TARGET_TYPE_AR9888V2 10 |
| /* For attach Rome1.0 target_reg_tbl only*/ |
| #define TARGET_TYPE_AR6320V1 11 |
| /* For Rome2.0/2.1 target_reg_tbl ID*/ |
| #define TARGET_TYPE_AR6320V2 12 |
| /* For Rome3.0 target_reg_tbl ID*/ |
| #define TARGET_TYPE_AR6320V3 13 |
| /* For Tufello1.0 target_reg_tbl ID*/ |
| #define TARGET_TYPE_QCA9377V1 14 |
| |
| #define BMI_ROMPATCH_INSTALL 9 |
| /* |
| * Semantics: Install a ROM Patch. |
| * Request format: |
| * A_UINT32 command (BMI_ROMPATCH_INSTALL) |
| * A_UINT32 Target ROM Address |
| * A_UINT32 Target RAM Address or Value (depending on Target Type) |
| * A_UINT32 Size, in bytes |
| * A_UINT32 Activate? 1-->activate; |
| * 0-->install but do not activate |
| * Response format: |
| * A_UINT32 PatchID |
| */ |
| |
| #define BMI_ROMPATCH_UNINSTALL 10 |
| /* |
| * Semantics: Uninstall a previously-installed ROM Patch, |
| * automatically deactivating, if necessary. |
| * Request format: |
| * A_UINT32 command (BMI_ROMPATCH_UNINSTALL) |
| * A_UINT32 PatchID |
| * |
| * Response format: none |
| */ |
| |
| #define BMI_ROMPATCH_ACTIVATE 11 |
| /* |
| * Semantics: Activate a list of previously-installed ROM Patches. |
| * Request format: |
| * A_UINT32 command (BMI_ROMPATCH_ACTIVATE) |
| * A_UINT32 rompatch_count |
| * A_UINT32 PatchID[rompatch_count] |
| * |
| * Response format: none |
| */ |
| |
| #define BMI_ROMPATCH_DEACTIVATE 12 |
| /* |
| * Semantics: Deactivate a list of active ROM Patches. |
| * Request format: |
| * A_UINT32 command (BMI_ROMPATCH_DEACTIVATE) |
| * A_UINT32 rompatch_count |
| * A_UINT32 PatchID[rompatch_count] |
| * |
| * Response format: none |
| */ |
| |
| |
| #define BMI_LZ_STREAM_START 13 |
| /* |
| * Semantics: Begin an LZ-compressed stream of input |
| * which is to be uncompressed by the Target to an |
| * output buffer at address. The output buffer must |
| * be sufficiently large to hold the uncompressed |
| * output from the compressed input stream. This BMI |
| * command should be followed by a series of 1 or more |
| * BMI_LZ_DATA commands. |
| * A_UINT32 command (BMI_LZ_STREAM_START) |
| * A_UINT32 address |
| * Note: Not supported on all versions of ROM firmware. |
| */ |
| |
| #define BMI_LZ_DATA 14 |
| /* |
| * Semantics: Host writes AR6K memory with LZ-compressed |
| * data which is uncompressed by the Target. This command |
| * must be preceded by a BMI_LZ_STREAM_START command. A series |
| * of BMI_LZ_DATA commands are considered part of a single |
| * input stream until another BMI_LZ_STREAM_START is issued. |
| * Request format: |
| * A_UINT32 command (BMI_LZ_DATA) |
| * A_UINT32 length (of compressed data), |
| * at most BMI_DATASZ_MAX |
| * A_UINT8 CompressedData[length] |
| * Response format: none |
| * Note: Not supported on all versions of ROM firmware. |
| */ |
| |
| #define BMI_NVRAM_PROCESS 15 |
| #define BMI_NVRAM_SEG_NAME_SZ 16 |
| /* |
| * Semantics: Cause Target to search NVRAM (if any) for a |
| * segment with the specified name and process it according |
| * to NVRAM metadata. |
| * Request format: |
| * A_UINT32 command (BMI_NVRAM_PROCESS) |
| * A_UCHAR name[BMI_NVRAM_SEG_NAME_SZ] name (LE format) |
| * Response format: |
| * A_UINT32 0, if nothing was executed; |
| * otherwise the value returned from the |
| * last NVRAM segment that was executed |
| */ |
| |
| #define BMI_SIGN_STREAM_START 17 |
| /* |
| * Semantics: Trigger target start/end binary signature verification |
| * flow. |
| * Request format: |
| * A_UINT32 command (BMI_SIGN_STREAM_START) |
| * A_UINT32 address |
| * A_UINT32 length, at most BMI_DATASZ_MAX |
| * A_UINT8 data[length] |
| * Response format: none |
| */ |
| |
| #ifndef ATH_TARGET |
| #include "athendpack.h" |
| #endif |
| |
| /* TBDXXX: Need a better place for these */ |
| #define BMI_CE_NUM_TO_TARG 0 |
| #define BMI_CE_NUM_TO_HOST 1 |
| |
| #endif /* __BMI_MSG_H__ */ |
