| /* |
| * Copyright (c) 2013-2014,2016-2017 The Linux Foundation. All rights reserved. |
| * |
| *Previously licensed under the ISC license by Qualcomm Atheros, Inc. |
| * |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * This file was originally distributed by Qualcomm Atheros, Inc. |
| * under proprietary terms before Copyright ownership was assigned |
| * to the Linux Foundation. |
| */ |
| |
| #include "athdefs.h" |
| #include "a_types.h" |
| #include "a_osapi.h" |
| #define ATH_MODULE_NAME bmi |
| #include "a_debug.h" |
| #define ATH_DEBUG_BMI ATH_DEBUG_MAKE_MODULE_MASK(0) |
| #include "hif.h" |
| #include "bmi.h" |
| #include "htc_api.h" |
| #include "if_ath_sdio.h" |
| #include "regtable.h" |
| |
| #define BMI_COMMUNICATION_TIMEOUT 100000 |
| |
| static A_BOOL pendingEventsFuncCheck = FALSE; |
| static A_UINT32 commandCredits = 0; |
| static A_UINT32 *pBMICmdCredits = &commandCredits; |
| |
| /* BMI Access routines */ |
| static A_STATUS |
| bmiBufferSend(HIF_DEVICE *device, |
| A_UCHAR *buffer, |
| A_UINT32 length) |
| { |
| A_STATUS status; |
| A_UINT32 timeout; |
| A_UINT32 address; |
| A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX]; |
| |
| HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR, |
| &mboxAddress[0], sizeof(mboxAddress)); |
| |
| *pBMICmdCredits = 0; |
| timeout = BMI_COMMUNICATION_TIMEOUT; |
| |
| while(timeout-- && !(*pBMICmdCredits)) { |
| /* Read the counter register to get the command credits */ |
| address = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4; |
| /* hit the credit counter with a 4-byte access, the first byte read will hit the counter and cause |
| * a decrement, while the remaining 3 bytes has no effect. The rationale behind this is to |
| * make all HIF accesses 4-byte aligned */ |
| status = HIFReadWrite(device, address, (A_UINT8 *)pBMICmdCredits, 4, |
| HIF_RD_SYNC_BYTE_INC, NULL); |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to decrement the command credit count register\n")); |
| return A_ERROR; |
| } |
| /* the counter is only 8=bits, ignore anything in the upper 3 bytes */ |
| (*pBMICmdCredits) &= 0xFF; |
| } |
| |
| if (*pBMICmdCredits) { |
| address = mboxAddress[ENDPOINT1]; |
| status = HIFReadWrite(device, address, buffer, length, |
| HIF_WR_SYNC_BYTE_INC, NULL); |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to send the BMI data to the device\n")); |
| return A_ERROR; |
| } |
| } else { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout - bmiBufferSend\n")); |
| return A_ERROR; |
| } |
| |
| return status; |
| } |
| |
| static A_STATUS |
| bmiBufferReceive(HIF_DEVICE *device, |
| A_UCHAR *buffer, |
| A_UINT32 length, |
| A_BOOL want_timeout) |
| { |
| A_STATUS status; |
| A_UINT32 address; |
| A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX]; |
| HIF_PENDING_EVENTS_INFO hifPendingEvents; |
| static HIF_PENDING_EVENTS_FUNC getPendingEventsFunc = NULL; |
| |
| if (!pendingEventsFuncCheck) { |
| /* see if the HIF layer implements an alternative function to get pending events |
| * do this only once! */ |
| HIFConfigureDevice(device, |
| HIF_DEVICE_GET_PENDING_EVENTS_FUNC, |
| &getPendingEventsFunc, |
| sizeof(getPendingEventsFunc)); |
| pendingEventsFuncCheck = TRUE; |
| } |
| |
| HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR, |
| &mboxAddress[0], sizeof(mboxAddress)); |
| |
| /* |
| * During normal bootup, small reads may be required. |
| * Rather than issue an HIF Read and then wait as the Target |
| * adds successive bytes to the FIFO, we wait here until |
| * we know that response data is available. |
| * |
| * This allows us to cleanly timeout on an unexpected |
| * Target failure rather than risk problems at the HIF level. In |
| * particular, this avoids SDIO timeouts and possibly garbage |
| * data on some host controllers. And on an interconnect |
| * such as Compact Flash (as well as some SDIO masters) which |
| * does not provide any indication on data timeout, it avoids |
| * a potential hang or garbage response. |
| * |
| * Synchronization is more difficult for reads larger than the |
| * size of the MBOX FIFO (128B), because the Target is unable |
| * to push the 129th byte of data until AFTER the Host posts an |
| * HIF Read and removes some FIFO data. So for large reads the |
| * Host proceeds to post an HIF Read BEFORE all the data is |
| * actually available to read. Fortunately, large BMI reads do |
| * not occur in practice -- they're supported for debug/development. |
| * |
| * So Host/Target BMI synchronization is divided into these cases: |
| * CASE 1: length < 4 |
| * Should not happen |
| * |
| * CASE 2: 4 <= length <= 128 |
| * Wait for first 4 bytes to be in FIFO |
| * If CONSERVATIVE_BMI_READ is enabled, also wait for |
| * a BMI command credit, which indicates that the ENTIRE |
| * response is available in the the FIFO |
| * |
| * CASE 3: length > 128 |
| * Wait for the first 4 bytes to be in FIFO |
| * |
| * For most uses, a small timeout should be sufficient and we will |
| * usually see a response quickly; but there may be some unusual |
| * (debug) cases of BMI_EXECUTE where we want an larger timeout. |
| * For now, we use an unbounded busy loop while waiting for |
| * BMI_EXECUTE. |
| * |
| * If BMI_EXECUTE ever needs to support longer-latency execution, |
| * especially in production, this code needs to be enhanced to sleep |
| * and yield. Also note that BMI_COMMUNICATION_TIMEOUT is currently |
| * a function of Host processor speed. |
| */ |
| if (length >= 4) { /* NB: Currently, always true */ |
| /* |
| * NB: word_available is declared static for esoteric reasons |
| * having to do with protection on some OSes. |
| */ |
| static A_UINT32 word_available; |
| A_UINT32 timeout; |
| |
| word_available = 0; |
| timeout = BMI_COMMUNICATION_TIMEOUT; |
| while((!want_timeout || timeout--) && !word_available) { |
| |
| if (getPendingEventsFunc != NULL) { |
| status = getPendingEventsFunc(device, |
| &hifPendingEvents, |
| NULL); |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMI: Failed to get pending events \n")); |
| break; |
| } |
| |
| if (hifPendingEvents.AvailableRecvBytes >= sizeof(A_UINT32)) { |
| word_available = 1; |
| } |
| continue; |
| } |
| #if defined(SDIO_3_0) |
| status = HIFReadWrite(device, HOST_INT_STATUS_ADDRESS, (A_UINT8 *)&word_available, sizeof(word_available), HIF_RD_SYNC_BYTE_INC, NULL); |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read HOST_INT_STATUS_ADDRESS register\n")); |
| return A_ERROR; |
| } |
| |
| #else |
| status = HIFReadWrite(device, RX_LOOKAHEAD_VALID_ADDRESS, (A_UINT8 *)&word_available, sizeof(word_available), HIF_RD_SYNC_BYTE_INC, NULL); |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read RX_LOOKAHEAD_VALID register\n")); |
| return A_ERROR; |
| } |
| #endif |
| /* We did a 4-byte read to the same register; all we really want is one bit */ |
| #if defined(SDIO_3_0) |
| word_available = (HOST_INT_STATUS_MBOX_DATA_GET(word_available) & ( 1 << ENDPOINT1)); |
| #else |
| word_available &= (1 << ENDPOINT1); |
| #endif |
| |
| } |
| |
| if (!word_available) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout - bmiBufferReceive FIFO empty\n")); |
| return A_ERROR; |
| } |
| } |
| |
| #define CONSERVATIVE_BMI_READ 0 |
| #if CONSERVATIVE_BMI_READ |
| /* |
| * This is an extra-conservative CREDIT check. It guarantees |
| * that ALL data is available in the FIFO before we start to |
| * read from the interconnect. |
| * |
| * This credit check is useless when firmware chooses to |
| * allow multiple outstanding BMI Command Credits, since the next |
| * credit will already be present. To restrict the Target to one |
| * BMI Command Credit, see HI_OPTION_BMI_CRED_LIMIT. |
| * |
| * And for large reads (when HI_OPTION_BMI_CRED_LIMIT is set) |
| * we cannot wait for the next credit because the Target's FIFO |
| * will not hold the entire response. So we need the Host to |
| * start to empty the FIFO sooner. (And again, large reads are |
| * not used in practice; they are for debug/development only.) |
| * |
| * For a more conservative Host implementation (which would be |
| * safer for a Compact Flash interconnect): |
| * Set CONSERVATIVE_BMI_READ (above) to 1 |
| * Set HI_OPTION_BMI_CRED_LIMIT and |
| * reduce BMI_DATASZ_MAX to 32 or 64 |
| */ |
| if ((length > 4) && (length < 128)) { /* check against MBOX FIFO size */ |
| A_UINT32 timeout; |
| |
| *pBMICmdCredits = 0; |
| timeout = BMI_COMMUNICATION_TIMEOUT; |
| while((!want_timeout || timeout--) && !(*pBMICmdCredits) { |
| /* Read the counter register to get the command credits */ |
| address = COUNT_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 1; |
| /* read the counter using a 4-byte read. Since the counter is NOT auto-decrementing, |
| * we can read this counter multiple times using a non-incrementing address mode. |
| * The rationale here is to make all HIF accesses a multiple of 4 bytes */ |
| status = HIFReadWrite(device, address, (A_UINT8 *)pBMICmdCredits, sizeof(*pBMICmdCredits), |
| HIF_RD_SYNC_BYTE_FIX, NULL); |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the command credit count register\n")); |
| return A_ERROR; |
| } |
| /* we did a 4-byte read to the same count register so mask off upper bytes */ |
| (*pBMICmdCredits) &= 0xFF; |
| } |
| |
| if (!(*pBMICmdCredits)) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout- bmiBufferReceive no credit\n")); |
| return A_ERROR; |
| } |
| } |
| #endif |
| |
| address = mboxAddress[ENDPOINT1]; |
| status = HIFReadWrite(device, address, buffer, length, HIF_RD_SYNC_BYTE_INC, NULL); |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the BMI data from the device\n")); |
| return A_ERROR; |
| } |
| |
| return A_OK; |
| } |
| |
| |
| A_STATUS HIFRegBasedGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info) |
| { |
| A_STATUS status; |
| A_UINT32 cid; |
| |
| /* From scope, when first CMD53 send out, the core_clk is not ready. |
| * So wait 100 ms here to wait target ready to avoid -110 error |
| * when loading driver |
| */ |
| if (((device->id->device & MANUFACTURER_ID_AR6K_BASE_MASK) == |
| MANUFACTURER_ID_QCA9377_BASE) || |
| ((device->id->device & MANUFACTURER_ID_AR6K_BASE_MASK) == |
| MANUFACTURER_ID_QCA9379_BASE)) { |
| msleep(100); |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Enter (device: 0x%pK)\n", device)); |
| cid = BMI_GET_TARGET_INFO; |
| |
| status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid)); |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device.\n")); |
| return A_ERROR; |
| } |
| |
| status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_ver, |
| sizeof(targ_info->target_ver), TRUE); |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Version from the device\n")); |
| return A_ERROR; |
| } |
| |
| if (targ_info->target_ver == TARGET_VERSION_SENTINAL) { |
| /* Determine how many bytes are in the Target's targ_info */ |
| status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_info_byte_count, |
| sizeof(targ_info->target_info_byte_count), TRUE); |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info Byte Count from the device\n")); |
| return A_ERROR; |
| } |
| |
| /* |
| * The Target's targ_info doesn't match the Host's targ_info. |
| * We need to do some backwards compatibility work to make this OK. |
| */ |
| A_ASSERT(targ_info->target_info_byte_count == sizeof(*targ_info)); |
| |
| /* Read the remainder of the targ_info */ |
| status = bmiBufferReceive(device, |
| ((A_UCHAR *)targ_info)+sizeof(targ_info->target_info_byte_count), |
| sizeof(*targ_info)-sizeof(targ_info->target_info_byte_count), TRUE); |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info (%d bytes) from the device\n", |
| targ_info->target_info_byte_count)); |
| return A_ERROR; |
| } |
| } else { |
| /* |
| * Target must be an AR6001 whose firmware does not |
| * support BMI_GET_TARGET_INFO. Construct the data |
| * that it would have sent. |
| */ |
| targ_info->target_info_byte_count=sizeof(*targ_info); |
| targ_info->target_type=TARGET_TYPE_AR6001; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n", |
| targ_info->target_ver, targ_info->target_type)); |
| |
| return A_OK; |
| } |
| |
| A_STATUS HIFExchangeBMIMsg(HIF_DEVICE *device, |
| A_UINT8 *pSendMessage, |
| A_UINT32 Length, |
| A_UINT8 *pResponseMessage, |
| A_UINT32 *pResponseLength, |
| A_UINT32 TimeoutMS) |
| { |
| A_STATUS status = A_OK; |
| |
| if (device == NULL ) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI: Null device argument\n")); |
| return A_EINVAL; |
| } |
| |
| do { |
| |
| status = bmiBufferSend(device, pSendMessage, Length); |
| if (A_FAILED(status)) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI : Unable to Send Message to device \n")); |
| break; |
| } |
| |
| if (pResponseMessage != NULL) { |
| status = bmiBufferReceive(device, pResponseMessage, *pResponseLength, TimeoutMS ? TRUE : FALSE); |
| if (A_FAILED(status)) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI : Unable to read response from device \n")); |
| break; |
| } |
| } |
| |
| } while (FALSE); |
| |
| return status; |
| } |
| |
| /* TODO .. the following APIs are a relic of the old register based interface */ |
| |
| A_STATUS |
| BMIRawWrite(HIF_DEVICE *device, A_UCHAR *buffer, A_UINT32 length) |
| { |
| return bmiBufferSend(device, buffer, length); |
| } |
| |
| A_STATUS |
| BMIRawRead(HIF_DEVICE *device, A_UCHAR *buffer, A_UINT32 length, A_BOOL want_timeout) |
| { |
| return bmiBufferReceive(device, buffer, length, want_timeout); |
| } |
| #ifdef BRINGUP_DEBUG |
| #define SDIO_SCRATCH_1_ADDRESS 0x864 |
| /*Functions used for debugging*/ |
| A_STATUS bmiWriteScratchRegister (HIF_DEVICE *device, u_int32_t buffer) |
| { |
| A_STATUS status = A_OK; |
| |
| |
| status = HIFReadWrite(device, SDIO_SCRATCH_1_ADDRESS, (A_UINT8 *)&buffer, 4, HIF_WR_SYNC_BYTE_INC, NULL); |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Unable to write to 0x%x\n",__func__, SDIO_SCRATCH_1_ADDRESS)); |
| return A_ERROR; |
| } |
| else |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: wrote 0x%x to 0x%x\n", __func__, buffer, SDIO_SCRATCH_1_ADDRESS)); |
| |
| return status; |
| } |
| |
| |
| A_STATUS bmiReadScratchRegister (HIF_DEVICE *device) |
| { |
| A_STATUS status = A_OK; |
| u_int32_t buffer = 0; |
| |
| |
| status = HIFReadWrite(device, SDIO_SCRATCH_1_ADDRESS, (A_UINT8 *)&buffer, 4, HIF_RD_SYNC_BYTE_INC, NULL); |
| if (status != A_OK) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Unable to read from 0x%x\n", __func__, SDIO_SCRATCH_1_ADDRESS)); |
| return A_ERROR; |
| } |
| else |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: read 0x%x from 0x%x\n", __func__, buffer, SDIO_SCRATCH_1_ADDRESS)); |
| |
| return status; |
| } |
| #endif |
| |