| /* |
| * Copyright (c) 2013-2017 The Linux Foundation. All rights reserved. |
| * |
| * Previously licensed under the ISC license by Qualcomm Atheros, Inc. |
| * |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * This file was originally distributed by Qualcomm Atheros, Inc. |
| * under proprietary terms before Copyright ownership was assigned |
| * to the Linux Foundation. |
| */ |
| |
| /**======================================================================== |
| |
| \file wma.c |
| \brief Implementation of WMA |
| |
| ========================================================================*/ |
| /**========================================================================= |
| EDIT HISTORY FOR FILE |
| |
| |
| This section contains comments describing changes made to the module. |
| Notice that changes are listed in reverse chronological order. |
| |
| $Header:$ $DateTime: $ $Author: $ |
| |
| |
| when who what, where, why |
| -------- --- ----------------------------------------- |
| 12/03/2013 Ganesh Implementation of WMA APIs. |
| Kondabattini |
| 27/03/2013 Ganesh Rx Management Support added |
| Babu |
| ==========================================================================*/ |
| |
| /* ################ Header files ################ */ |
| #include "ieee80211_common.h" /* ieee80211_frame */ |
| #include "wma.h" |
| #include "wma_api.h" |
| #include "vos_api.h" |
| #include "wmi_unified_api.h" |
| #include "wlan_qct_sys.h" |
| #include "wniApi.h" |
| #include "aniGlobal.h" |
| #include "wmi_unified.h" |
| #include "wni_cfg.h" |
| #include "cfgApi.h" |
| #include "ol_txrx_ctrl_api.h" |
| #if defined(CONFIG_HL_SUPPORT) |
| #include "wlan_tgt_def_config_hl.h" |
| #else |
| #include "wlan_tgt_def_config.h" |
| #endif |
| |
| #if defined(QCA_IBSS_SUPPORT) |
| #include "wlan_hdd_assoc.h" |
| #endif |
| |
| #include "adf_nbuf.h" |
| #include "adf_os_types.h" |
| #include "ol_txrx_api.h" |
| #include "vos_memory.h" |
| #include "ol_txrx_types.h" |
| #include "ol_txrx_peer_find.h" |
| |
| #include "wlan_qct_wda.h" |
| #include "wlan_qct_wda_msg.h" |
| #include "limApi.h" |
| #include "limSessionUtils.h" |
| |
| #include "wdi_out.h" |
| #include "wdi_in.h" |
| |
| #include "vos_cnss.h" |
| |
| #include "vos_utils.h" |
| #include "tl_shim.h" |
| #if defined(QCA_WIFI_FTM) |
| #include "testmode.h" |
| #endif |
| |
| #if !defined(REMOVE_PKT_LOG) |
| #include "pktlog_ac.h" |
| #endif |
| |
| #include "dbglog_host.h" |
| /* FIXME: Inclusion of .c looks odd but this is how it is in internal codebase */ |
| #include "wmi_version_whitelist.c" |
| #include "csrApi.h" |
| #include "ol_fw.h" |
| |
| #include "dfs.h" |
| #include "radar_filters.h" |
| #include "regdomain_common.h" |
| |
| #include "wma_ocb.h" |
| #include "wma_nan_datapath.h" |
| #include "adf_trace.h" |
| |
| /* ################### defines ################### */ |
| /* |
| * TODO: Following constant should be shared by firwmare in |
| * wmi_unified.h. This will be done once wmi_unified.h is updated. |
| */ |
| #define WMI_PEER_STATE_AUTHORIZED 0x2 |
| |
| #define WMA_2_4_GHZ_MAX_FREQ 3000 |
| #define WOW_CSA_EVENT_OFFSET 12 |
| |
| /* |
| * In the WMI_WOW_WAKEUP_HOST_EVENTID after the fixed param |
| * the wmi nan event is at an offset of 12 |
| * This is to extract and decode the NAN WMI event. |
| */ |
| #define WOW_NAN_EVENT_OFFSET 12 |
| |
| #define WMA_DEFAULT_SCAN_REQUESTER_ID 1 |
| #define WMI_SCAN_FINISH_EVENTS (WMI_SCAN_EVENT_START_FAILED |\ |
| WMI_SCAN_EVENT_COMPLETED |\ |
| WMI_SCAN_EVENT_DEQUEUED) |
| /* default value */ |
| #define DEFAULT_INFRA_STA_KEEP_ALIVE_PERIOD 20 |
| /* pdev vdev and peer stats*/ |
| #define FW_PDEV_STATS_SET 0x1 |
| #define FW_VDEV_STATS_SET 0x2 |
| #define FW_PEER_STATS_SET 0x4 |
| #define FW_RSSI_PER_CHAIN_STATS_SET 0x8 |
| #define FW_STATS_SET 0xf |
| /*AR9888/AR6320 noise floor approx value |
| * similar to the mentioned the TLSHIM |
| */ |
| #define WMA_TGT_NOISE_FLOOR_DBM (-96) |
| #define WMA_TGT_RSSI_INVALID 96 |
| |
| /* |
| * Make sure that link monitor and keep alive |
| * default values should be in sync with CFG. |
| */ |
| #define WMA_LINK_MONITOR_DEFAULT_TIME_SECS 10 |
| #define WMA_KEEP_ALIVE_DEFAULT_TIME_SECS 5 |
| |
| #define AGC_DUMP 1 |
| #define CHAN_DUMP 2 |
| #define WD_DUMP 3 |
| #ifdef CONFIG_ATH_PCIE_ACCESS_DEBUG |
| #define PCIE_DUMP 4 |
| #endif |
| |
| /* conformance test limits */ |
| #define FCC 0x10 |
| #define MKK 0x40 |
| #define ETSI 0x30 |
| |
| /* Maximum Buffer length allowed for DFS phyerrors */ |
| #define DFS_MAX_BUF_LENGHT 4096 |
| |
| #define WMI_DEFAULT_NOISE_FLOOR_DBM (-96) |
| |
| /* Threshold to print tx time taken in ms*/ |
| #define WDA_TX_TIME_THRESHOLD 1000 |
| |
| #define WMI_MCC_MIN_CHANNEL_QUOTA 20 |
| #define WMI_MCC_MAX_CHANNEL_QUOTA 80 |
| #define WMI_MCC_MIN_NON_ZERO_CHANNEL_LATENCY 30 |
| |
| /* The maximum number of patterns that can be transmitted by the firmware |
| * and maximum patterns size. |
| */ |
| #define WMA_MAXNUM_PERIODIC_TX_PTRNS 6 |
| |
| #define WMI_MAX_HOST_CREDITS 2 |
| #define WMI_WOW_REQUIRED_CREDITS 1 |
| |
| #define WMI_MAX_MHF_ENTRIES 32 |
| |
| #ifdef FEATURE_WLAN_D0WOW |
| #define DISABLE_PCIE_POWER_COLLAPSE 1 |
| #define ENABLE_PCIE_POWER_COLLAPSE 0 |
| #endif |
| |
| #define MAX_HT_MCS_IDX 8 |
| #define MAX_VHT_MCS_IDX 10 |
| #define INVALID_MCS_IDX 255 |
| |
| #define LINK_STATUS_LEGACY 0 |
| #define LINK_STATUS_VHT 0x1 |
| #define LINK_STATUS_MIMO 0x2 |
| #define LINK_SUPPORT_VHT 0x4 |
| #define LINK_SUPPORT_MIMO 0x8 |
| |
| #define LINK_RATE_VHT 0x3 |
| |
| #define WMA_MCC_MIRACAST_REST_TIME 400 |
| |
| #define WMA_LOG_COMPLETION_TIMER 10000 /* 10 seconds */ |
| |
| #define WMA_FW_TIME_SYNC_TIMER 60000 /* 1 min */ |
| #define WMA_FW_TIME_STAMP_LOW_MASK 0xffffffff |
| |
| #define WMI_TLV_HEADROOM 128 |
| |
| #define WMA_SUSPEND_TIMEOUT_IN_SSR 1 |
| #define WMA_DEL_BSS_TIMEOUT_IN_SSR 10 |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| static int wma_nlo_scan_cmp_evt_handler(void *handle, u_int8_t *event, |
| u_int32_t len); |
| #endif |
| |
| static enum powersave_qpower_mode wma_get_qpower_config(tp_wma_handle wma); |
| |
| #ifdef FEATURE_WLAN_DIAG_SUPPORT |
| /** |
| * wma_wow_wakeup_stats_event()- send wow wakeup stats |
| * tp_wma_handle wma: WOW wakeup packet counter |
| * |
| * This function sends wow wakeup stats diag event |
| * |
| * Return: void. |
| */ |
| static void wma_wow_wakeup_stats_event(tp_wma_handle wma) |
| { |
| WLAN_VOS_DIAG_EVENT_DEF(WowStats, |
| vos_event_wlan_powersave_wow_stats); |
| vos_mem_zero(&WowStats, sizeof(WowStats)); |
| |
| WowStats.wow_ucast_wake_up_count = wma->wow_ucast_wake_up_count; |
| WowStats.wow_bcast_wake_up_count = wma->wow_bcast_wake_up_count; |
| WowStats.wow_ipv4_mcast_wake_up_count = |
| wma->wow_ipv4_mcast_wake_up_count; |
| WowStats.wow_ipv6_mcast_wake_up_count = |
| wma->wow_ipv6_mcast_wake_up_count; |
| WowStats.wow_ipv6_mcast_ra_stats = wma->wow_ipv6_mcast_ra_stats; |
| WowStats.wow_ipv6_mcast_ns_stats = wma->wow_ipv6_mcast_ns_stats; |
| WowStats.wow_ipv6_mcast_na_stats = wma->wow_ipv6_mcast_na_stats; |
| WowStats.wow_pno_match_wake_up_count = wma->wow_pno_match_wake_up_count; |
| WowStats.wow_pno_complete_wake_up_count = |
| wma->wow_pno_complete_wake_up_count; |
| WowStats.wow_gscan_wake_up_count = wma->wow_gscan_wake_up_count; |
| WowStats.wow_low_rssi_wake_up_count = wma->wow_low_rssi_wake_up_count; |
| WowStats.wow_rssi_breach_wake_up_count = |
| wma->wow_rssi_breach_wake_up_count; |
| WowStats.wow_icmpv4_count = wma->wow_icmpv4_count; |
| WowStats.wow_icmpv6_count = wma->wow_icmpv6_count; |
| WowStats.wow_oem_response_wake_up_count = |
| wma->wow_oem_response_wake_up_count; |
| WLAN_VOS_DIAG_EVENT_REPORT(&WowStats, EVENT_WLAN_POWERSAVE_WOW_STATS); |
| } |
| #else |
| static void wma_wow_wakeup_stats_event(tp_wma_handle wma) |
| { |
| return; |
| } |
| #endif |
| |
| #ifdef FEATURE_WLAN_EXTSCAN |
| /** |
| * enum extscan_report_events_type - extscan report events type |
| * @EXTSCAN_REPORT_EVENTS_BUFFER_FULL: report only when scan history is % full |
| * @EXTSCAN_REPORT_EVENTS_EACH_SCAN: report a scan completion event after scan |
| * @EXTSCAN_REPORT_EVENTS_FULL_RESULTS: forward scan results |
| * (beacons/probe responses + IEs) |
| * in real time to HAL, in addition to completion events. |
| * Note: To keep backward compatibility, |
| * fire completion events regardless of REPORT_EVENTS_EACH_SCAN. |
| * @EXTSCAN_REPORT_EVENTS_NO_BATCH: controls batching, |
| * 0 => batching, 1 => no batching |
| */ |
| enum extscan_report_events_type { |
| EXTSCAN_REPORT_EVENTS_BUFFER_FULL = 0x00, |
| EXTSCAN_REPORT_EVENTS_EACH_SCAN = 0x01, |
| EXTSCAN_REPORT_EVENTS_FULL_RESULTS = 0x02, |
| EXTSCAN_REPORT_EVENTS_NO_BATCH = 0x04, |
| EXTSCAN_REPORT_EVENTS_CONTEXT_HUB = 0x08, |
| }; |
| |
| #define WMA_EXTSCAN_CYCLE_WAKE_LOCK_DURATION (5 * 1000) /* in msec */ |
| |
| /* |
| * Maximum number of entires that could be present in the |
| * WMI_EXTSCAN_HOTLIST_MATCH_EVENT buffer from the firmware |
| */ |
| #define WMA_EXTSCAN_MAX_HOTLIST_ENTRIES 10 |
| |
| #endif |
| |
| /* Data rate 100KBPS based on IE Index */ |
| struct index_data_rate_type |
| { |
| v_U8_t mcs_index; |
| v_U16_t ht20_rate[2]; |
| v_U16_t ht40_rate[2]; |
| }; |
| |
| #ifdef WLAN_FEATURE_11AC |
| struct index_vht_data_rate_type |
| { |
| v_U8_t mcs_index; |
| v_U16_t ht20_rate[2]; |
| v_U16_t ht40_rate[2]; |
| v_U16_t ht80_rate[2]; |
| }; |
| #endif |
| |
| /* MCS Based rate table */ |
| /* HT MCS parameters with Nss = 1 */ |
| static struct index_data_rate_type mcs_nss1[] = |
| { |
| /* MCS L20 S20 L40 S40 */ |
| {0, {65, 72}, {135, 150 }}, |
| {1, {130, 144}, {270, 300 }}, |
| {2, {195, 217}, {405, 450 }}, |
| {3, {260, 289}, {540, 600 }}, |
| {4, {390, 433}, {815, 900 }}, |
| {5, {520, 578}, {1080, 1200}}, |
| {6, {585, 650}, {1215, 1350}}, |
| {7, {650, 722}, {1350, 1500}} |
| }; |
| /* HT MCS parameters with Nss = 2 */ |
| static struct index_data_rate_type mcs_nss2[] = |
| { |
| /* MCS L20 S20 L40 S40 */ |
| {0, {130, 144}, {270, 300 }}, |
| {1, {260, 289}, {540, 600 }}, |
| {2, {390, 433}, {810, 900 }}, |
| {3, {520, 578}, {1080, 1200}}, |
| {4, {780, 867}, {1620, 1800}}, |
| {5, {1040, 1156}, {2160, 2400}}, |
| {6, {1170, 1300}, {2430, 2700}}, |
| {7, {1300, 1440}, {2700, 3000}} |
| }; |
| |
| #ifdef WLAN_FEATURE_11AC |
| /* MCS Based VHT rate table */ |
| /* MCS parameters with Nss = 1*/ |
| static struct index_vht_data_rate_type vht_mcs_nss1[] = |
| { |
| /* MCS L20 S20 L40 S40 L80 S80 */ |
| {0, {65, 72 }, {135, 150}, {293, 325} }, |
| {1, {130, 144}, {270, 300}, {585, 650} }, |
| {2, {195, 217}, {405, 450}, {878, 975} }, |
| {3, {260, 289}, {540, 600}, {1170, 1300}}, |
| {4, {390, 433}, {810, 900}, {1755, 1950}}, |
| {5, {520, 578}, {1080, 1200}, {2340, 2600}}, |
| {6, {585, 650}, {1215, 1350}, {2633, 2925}}, |
| {7, {650, 722}, {1350, 1500}, {2925, 3250}}, |
| {8, {780, 867}, {1620, 1800}, {3510, 3900}}, |
| {9, {865, 960}, {1800, 2000}, {3900, 4333}} |
| }; |
| |
| /*MCS parameters with Nss = 2*/ |
| static struct index_vht_data_rate_type vht_mcs_nss2[] = |
| { |
| /* MCS L20 S20 L40 S40 L80 S80 */ |
| {0, {130, 144}, {270, 300}, { 585, 650}}, |
| {1, {260, 289}, {540, 600}, {1170, 1300}}, |
| {2, {390, 433}, {810, 900}, {1755, 1950}}, |
| {3, {520, 578}, {1080, 1200}, {2340, 2600}}, |
| {4, {780, 867}, {1620, 1800}, {3510, 3900}}, |
| {5, {1040, 1156}, {2160, 2400}, {4680, 5200}}, |
| {6, {1170, 1300}, {2430, 2700}, {5265, 5850}}, |
| {7, {1300, 1444}, {2700, 3000}, {5850, 6500}}, |
| {8, {1560, 1733}, {3240, 3600}, {7020, 7800}}, |
| {9, {1730, 1920}, {3600, 4000}, {7800, 8667}} |
| }; |
| #endif |
| |
| void wma_send_msg(tp_wma_handle wma_handle, u_int16_t msg_type, |
| void *body_ptr, u_int32_t body_val); |
| |
| #ifdef QCA_IBSS_SUPPORT |
| static void wma_data_tx_ack_comp_hdlr(void *wma_context, |
| adf_nbuf_t netbuf, |
| int32_t status); |
| #endif |
| static VOS_STATUS wma_vdev_detach(tp_wma_handle wma_handle, |
| tpDelStaSelfParams pdel_sta_self_req_param, |
| u_int8_t generateRsp); |
| static int32_t wmi_unified_vdev_stop_send(wmi_unified_t wmi, u_int8_t vdev_id); |
| |
| static tANI_U32 gFwWlanFeatCaps; |
| |
| static eHalStatus wma_set_ppsconfig(tANI_U8 vdev_id, tANI_U16 pps_param, |
| int value); |
| static eHalStatus wma_set_mimops(tp_wma_handle wma_handle, |
| tANI_U8 vdev_id, int value); |
| #ifdef FEATURE_WLAN_TDLS |
| static int wma_update_fw_tdls_state(WMA_HANDLE handle, void *pwmaTdlsparams); |
| static int wma_update_tdls_peer_state(WMA_HANDLE handle, |
| tTdlsPeerStateParams *peerStateParams); |
| static int wma_set_tdls_offchan_mode(WMA_HANDLE wma_handle, |
| tTdlsChanSwitchParams *pChanSwitchParams); |
| #endif |
| |
| static eHalStatus wma_set_smps_params(tp_wma_handle wma_handle, |
| tANI_U8 vdev_id, int value); |
| #if defined(QCA_WIFI_FTM) |
| void wma_utf_attach(tp_wma_handle wma_handle); |
| void wma_utf_detach(tp_wma_handle wma_handle); |
| static VOS_STATUS |
| wma_process_ftm_command(tp_wma_handle wma_handle, |
| struct ar6k_testmode_cmd_data *msg_buffer); |
| #endif |
| |
| VOS_STATUS wma_create_peer(tp_wma_handle wma, ol_txrx_pdev_handle pdev, |
| ol_txrx_vdev_handle vdev, u8 peer_addr[6], |
| u_int32_t peer_type, u_int8_t vdev_id, |
| v_BOOL_t roam_synch_in_progress); |
| static ol_txrx_vdev_handle wma_vdev_attach(tp_wma_handle wma_handle, |
| tpAddStaSelfParams self_sta_req, |
| u_int8_t generateRsp); |
| static void wma_set_bsskey(tp_wma_handle wma_handle, tpSetBssKeyParams key_info); |
| |
| /*DFS Attach*/ |
| struct ieee80211com* wma_dfs_attach(struct ieee80211com *ic); |
| static void wma_dfs_detach(struct ieee80211com *ic); |
| void wma_set_bss_rate_flags(struct wma_txrx_node *iface, |
| tpAddBssParams add_bss); |
| /*Configure DFS with radar tables and regulatory domain*/ |
| void wma_dfs_configure(struct ieee80211com *ic); |
| |
| /*Configure the current channel with the DFS*/ |
| struct ieee80211_channel * |
| wma_dfs_configure_channel(struct ieee80211com *dfs_ic, |
| wmi_channel *chan, |
| WLAN_PHY_MODE chanmode, |
| struct wma_vdev_start_req *req); |
| |
| /* VDEV UP */ |
| static int |
| wmi_unified_vdev_up_send(wmi_unified_t wmi, |
| u_int8_t vdev_id, u_int16_t aid, |
| u_int8_t bssid[IEEE80211_ADDR_LEN]); |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| void wma_process_roam_synch_complete(WMA_HANDLE handle, |
| tSirSmeRoamOffloadSynchCnf *synchcnf); |
| void wma_process_roam_synch_fail(WMA_HANDLE handle, |
| tSirRoamOffloadSynchFail *synchfail); |
| #endif |
| |
| static VOS_STATUS wma_set_thermal_mgmt(tp_wma_handle wma_handle, |
| t_thermal_cmd_params thermal_info); |
| |
| #ifdef FEATURE_WLAN_CH_AVOID |
| VOS_STATUS wma_process_ch_avoid_update_req(tp_wma_handle wma_handle, |
| tSirChAvoidUpdateReq *ch_avoid_update_req); |
| #endif /* FEATURE_WLAN_CH_AVOID */ |
| |
| static void wma_set_stakey(tp_wma_handle wma_handle, tpSetStaKeyParams key_info); |
| |
| static void wma_beacon_miss_handler(tp_wma_handle wma, u_int32_t vdev_id, |
| uint32_t rssi); |
| static void wma_set_suspend_dtim(tp_wma_handle wma); |
| static void wma_set_resume_dtim(tp_wma_handle wma); |
| static int wma_roam_event_callback(WMA_HANDLE handle, u_int8_t *event_buf, |
| u_int32_t len); |
| static VOS_STATUS wma_stop_scan(tp_wma_handle wma_handle, |
| tAbortScanParams *abort_scan_req); |
| |
| static void wma_set_sap_keepalive(tp_wma_handle wma, u_int8_t vdev_id); |
| static void wma_set_vdev_mgmt_rate(tp_wma_handle wma, u_int8_t vdev_id); |
| static int wma_smps_force_mode_callback(WMA_HANDLE handle, uint8_t *event_buf, |
| uint32_t len); |
| |
| static void wma_send_time_stamp_sync_cmd(void *data); |
| |
| tANI_U8 wma_getCenterChannel(tANI_U8 chan, tANI_U8 chan_offset); |
| |
| |
| /* |
| * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": |
| * 0 for no restriction |
| * 1 for 1/4 us - Our lower layer calculations limit our precision to 1 msec |
| * 2 for 1/2 us - Our lower layer calculations limit our precision to 1 msec |
| * 3 for 1 us |
| * 4 for 2 us |
| * 5 for 4 us |
| * 6 for 8 us |
| * 7 for 16 us |
| */ |
| static const u_int8_t wma_mpdu_spacing[] = {0, 1, 1, 1, 2, 4, 8, 16}; |
| |
| static inline uint8_t wma_parse_mpdudensity(u_int8_t mpdudensity) |
| { |
| if (mpdudensity < sizeof(wma_mpdu_spacing)) |
| return wma_mpdu_spacing[mpdudensity]; |
| else |
| return 0; |
| } |
| |
| /* Function : wma_get_vdev_count |
| * Discription : Returns number of active vdev. |
| * Args : @wma - wma handle |
| * Returns : Returns valid vdev count. |
| */ |
| static inline u_int8_t wma_get_vdev_count(tp_wma_handle wma) |
| { |
| u_int8_t vdev_count = 0, i; |
| |
| for (i = 0; i < wma->max_bssid; i++) { |
| if (wma->interfaces[i].handle) |
| vdev_count++; |
| } |
| return vdev_count; |
| } |
| |
| /** |
| * wma_did_ssr_happen() - Check if SSR happened by comparing current |
| * wma handle and new wma handle |
| * @wma: Pointer to wma handle |
| * |
| * This API will compare saved wma handle and new wma handle using global |
| * vos context. If both doesn't match implies that WMA handle got changed |
| * while waiting for command which will happen in SSR. |
| * |
| * Return: True if SSR happened else false |
| */ |
| static bool wma_did_ssr_happen(tp_wma_handle wma) |
| { |
| return vos_get_context(VOS_MODULE_ID_WDA, |
| vos_get_global_context(VOS_MODULE_ID_VOSS, NULL)) != wma; |
| } |
| |
| |
| /* Function : wma_is_vdev_in_ap_mode |
| * Description : Helper function to know whether given vdev id |
| * is in AP mode or not. |
| * Args : @wma - wma handle, @ vdev_id - vdev ID. |
| * Returns : True - if given vdev id is in AP mode. |
| * False - if given vdev id is not in AP mode. |
| */ |
| static bool wma_is_vdev_in_ap_mode(tp_wma_handle wma, u_int8_t vdev_id) |
| { |
| struct wma_txrx_node *intf = wma->interfaces; |
| |
| if (vdev_id > wma->max_bssid) { |
| WMA_LOGP("%s: Invalid vdev_id %hu", __func__, vdev_id); |
| VOS_ASSERT(0); |
| return false; |
| } |
| |
| if ((intf[vdev_id].type == WMI_VDEV_TYPE_AP) && |
| ((intf[vdev_id].sub_type == WMI_UNIFIED_VDEV_SUBTYPE_P2P_GO) || |
| (intf[vdev_id].sub_type == 0))) |
| return true; |
| |
| return false; |
| } |
| |
| #ifdef QCA_IBSS_SUPPORT |
| /* Function : wma_is_vdev_in_ibss_mode |
| s_vdev_in_ibss_mode* Description : Helper function to know whether given vdev id |
| * is in IBSS mode or not. |
| * Args : @wma - wma handle, @ vdev_id - vdev ID. |
| * Retruns : True - if given vdev id is in IBSS mode. |
| * False - if given vdev id is not in IBSS mode. |
| */ |
| static bool wma_is_vdev_in_ibss_mode(tp_wma_handle wma, u_int8_t vdev_id) |
| { |
| struct wma_txrx_node *intf = wma->interfaces; |
| |
| if (vdev_id > wma->max_bssid) { |
| WMA_LOGP("%s: Invalid vdev_id %hu", __func__, vdev_id); |
| VOS_ASSERT(0); |
| return false; |
| } |
| |
| if (intf[vdev_id].type == WMI_VDEV_TYPE_IBSS) |
| return true; |
| |
| return false; |
| } |
| #endif |
| |
| /* |
| * Function : wma_find_bssid_by_vdev_id |
| * Description : Get the BSS ID corresponding to the vdev ID |
| * Args : @wma - wma handle, @vdev_id - vdev ID |
| * Returns : Returns pointer to bssid on success, |
| * otherwise returns NULL. |
| */ |
| static inline u_int8_t *wma_find_bssid_by_vdev_id(tp_wma_handle wma, |
| u_int8_t vdev_id) |
| { |
| if (vdev_id >= wma->max_bssid) |
| return NULL; |
| |
| return wma->interfaces[vdev_id].bssid; |
| } |
| |
| /* |
| * Function : wma_find_vdev_by_bssid |
| * Description : Get the VDEV ID corresponding from BSS ID |
| * Args : @wma - wma handle, @vdev_id - vdev ID |
| * Returns : Returns pointer to bssid on success, |
| * otherwise returns NULL. |
| */ |
| static void *wma_find_vdev_by_bssid(tp_wma_handle wma, u_int8_t *bssid, |
| u_int8_t *vdev_id) |
| { |
| int i; |
| |
| for (i = 0; i < wma->max_bssid; i++) { |
| if (vos_is_macaddr_equal( |
| (v_MACADDR_t *)wma->interfaces[i].bssid, |
| (v_MACADDR_t *)bssid) == VOS_TRUE) { |
| *vdev_id = i; |
| return wma->interfaces[i].handle; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| #ifdef BIG_ENDIAN_HOST |
| |
| /* ############# function definitions ############ */ |
| |
| /* function : wma_swap_bytes |
| * Description : |
| * Args : |
| * Retruns : |
| */ |
| v_VOID_t wma_swap_bytes(v_VOID_t *pv, v_SIZE_t n) |
| { |
| v_SINT_t no_words; |
| v_SINT_t i; |
| v_U32_t *word_ptr; |
| |
| no_words = n/sizeof(v_U32_t); |
| word_ptr = (v_U32_t *)pv; |
| for (i=0; i<no_words; i++) { |
| *(word_ptr + i) = __cpu_to_le32(*(word_ptr + i)); |
| } |
| } |
| #define SWAPME(x, len) wma_swap_bytes(&x, len); |
| #endif |
| |
| /** |
| * mcs_rate_match() - find the match mcs rate |
| * @is_sgi: return if the SGI rate is found |
| * @nss: the nss in use |
| * @nss1_rate: the nss1 rate |
| * @nss1_srate: the nss1 SGI rate |
| * @nss2_rate: the nss2 rate |
| * @nss2_srate: the nss2 SGI rate |
| * |
| * This is a helper function to find the match of the tx_rate |
| * in terms of the nss1/nss2 rate with non-SGI/SGI. |
| * |
| * Return: the found rate or 0 otherwise |
| */ |
| static inline uint16_t mcs_rate_match(uint16_t match_rate, bool *is_sgi, |
| uint8_t nss, uint16_t nss1_rate, uint16_t nss1_srate, |
| uint16_t nss2_rate, uint16_t nss2_srate) |
| { |
| if (match_rate == nss1_rate) |
| return nss1_rate; |
| else if (match_rate == nss1_srate) { |
| *is_sgi = true; |
| return nss1_srate; |
| } else if (nss == 2 && match_rate == nss2_rate) |
| return nss2_rate; |
| else if (nss == 2 && match_rate == nss2_srate) { |
| *is_sgi = true; |
| return nss2_srate; |
| } else |
| return 0; |
| } |
| |
| static tANI_U8 wma_get_mcs_idx(tANI_U16 maxRate, tANI_U8 rate_flags, |
| tANI_U8 nss, |
| tANI_U8 *mcsRateFlag) |
| { |
| tANI_U8 curIdx = 0; |
| tANI_U16 cur_rate = 0; |
| bool is_sgi = false; |
| |
| WMA_LOGD("%s rate:%d rate_flgs: 0x%x, nss: %d", |
| __func__, maxRate,rate_flags, nss); |
| |
| *mcsRateFlag = rate_flags; |
| *mcsRateFlag &= ~eHAL_TX_RATE_SGI; |
| |
| #ifdef WLAN_FEATURE_11AC |
| for (curIdx = 0; curIdx < MAX_VHT_MCS_IDX; curIdx++) { |
| if (rate_flags & eHAL_TX_RATE_VHT80) { |
| /* check for vht80 nss1/2 rate set */ |
| cur_rate = mcs_rate_match(maxRate, &is_sgi, nss, |
| vht_mcs_nss1[curIdx].ht80_rate[0], |
| vht_mcs_nss1[curIdx].ht80_rate[1], |
| vht_mcs_nss2[curIdx].ht80_rate[0], |
| vht_mcs_nss2[curIdx].ht80_rate[1]); |
| if (cur_rate) |
| goto rate_found; |
| } |
| if ((rate_flags & eHAL_TX_RATE_VHT40) | |
| (rate_flags & eHAL_TX_RATE_VHT80)) { |
| /* check for vht40 nss1/2 rate set */ |
| cur_rate = mcs_rate_match(maxRate, &is_sgi, nss, |
| vht_mcs_nss1[curIdx].ht40_rate[0], |
| vht_mcs_nss1[curIdx].ht40_rate[1], |
| vht_mcs_nss2[curIdx].ht40_rate[0], |
| vht_mcs_nss2[curIdx].ht40_rate[1]); |
| if (cur_rate) { |
| *mcsRateFlag &= ~eHAL_TX_RATE_VHT80; |
| goto rate_found; |
| } |
| } |
| if ((rate_flags & eHAL_TX_RATE_VHT20) | |
| (rate_flags & eHAL_TX_RATE_VHT40) | |
| (rate_flags & eHAL_TX_RATE_VHT80)) { |
| /* check for vht20 nss1/2 rate set */ |
| cur_rate = mcs_rate_match(maxRate, &is_sgi, nss, |
| vht_mcs_nss1[curIdx].ht20_rate[0], |
| vht_mcs_nss1[curIdx].ht20_rate[1], |
| vht_mcs_nss2[curIdx].ht20_rate[0], |
| vht_mcs_nss2[curIdx].ht20_rate[1]); |
| if (cur_rate) { |
| *mcsRateFlag &= ~(eHAL_TX_RATE_VHT80 | |
| eHAL_TX_RATE_VHT40); |
| goto rate_found; |
| } |
| } |
| } |
| #endif |
| for (curIdx = 0; curIdx < MAX_HT_MCS_IDX; curIdx++) { |
| if (rate_flags & eHAL_TX_RATE_HT40) { |
| /* check for ht40 nss1/2 rate set */ |
| cur_rate = mcs_rate_match(maxRate, &is_sgi, nss, |
| mcs_nss1[curIdx].ht40_rate[0], |
| mcs_nss1[curIdx].ht40_rate[1], |
| mcs_nss2[curIdx].ht40_rate[0], |
| mcs_nss2[curIdx].ht40_rate[1]); |
| if (cur_rate) { |
| *mcsRateFlag = eHAL_TX_RATE_HT40; |
| goto rate_found; |
| } |
| } |
| if ((rate_flags & eHAL_TX_RATE_HT20) || |
| (rate_flags & eHAL_TX_RATE_HT40)) { |
| /* check for ht20 nss1/2 rate set */ |
| cur_rate = mcs_rate_match(maxRate, &is_sgi, nss, |
| mcs_nss1[curIdx].ht20_rate[0], |
| mcs_nss1[curIdx].ht20_rate[1], |
| mcs_nss2[curIdx].ht20_rate[0], |
| mcs_nss2[curIdx].ht20_rate[1]); |
| if (cur_rate) { |
| *mcsRateFlag = eHAL_TX_RATE_HT20; |
| goto rate_found; |
| } |
| } |
| } |
| |
| rate_found: |
| /* set SGI flag only if this is SGI rate */ |
| if (cur_rate && is_sgi == true) |
| *mcsRateFlag |= eHAL_TX_RATE_SGI; |
| |
| WMA_LOGD("%s - cur_rate: %d index: %d rate_flag: 0x%x is_sgi: %d", |
| __func__, cur_rate, curIdx, *mcsRateFlag, is_sgi); |
| |
| return (cur_rate ? curIdx : INVALID_MCS_IDX); |
| } |
| |
| static struct wma_target_req *wma_find_vdev_req(tp_wma_handle wma, |
| u_int8_t vdev_id, |
| u_int8_t type) |
| { |
| struct wma_target_req *req_msg = NULL, *tmp; |
| bool found = false; |
| |
| adf_os_spin_lock_bh(&wma->vdev_respq_lock); |
| list_for_each_entry_safe(req_msg, tmp, |
| &wma->vdev_resp_queue, node) { |
| if (req_msg->vdev_id != vdev_id) |
| continue; |
| if (req_msg->type != type) |
| continue; |
| |
| found = true; |
| list_del(&req_msg->node); |
| break; |
| } |
| adf_os_spin_unlock_bh(&wma->vdev_respq_lock); |
| if (!found) { |
| WMA_LOGP("%s: target request not found for vdev_id %d type %d", |
| __func__, vdev_id, type); |
| return NULL; |
| } |
| WMA_LOGD("%s: target request found for vdev id: %d type %d msg %d", |
| __func__, vdev_id, type, req_msg->msg_type); |
| return req_msg; |
| } |
| |
| /** |
| * wma_peek_vdev_req() - peek what request message is queued for response. |
| * the function does not delete the node after found |
| * @wma: WMA handle |
| * @vdev_id: vdev ID |
| * @type: request message type |
| * |
| * Return: the request message found |
| */ |
| static struct wma_target_req *wma_peek_vdev_req(tp_wma_handle wma, |
| uint8_t vdev_id, |
| uint8_t type) |
| { |
| struct wma_target_req *req_msg = NULL, *tmp; |
| bool found = false; |
| |
| adf_os_spin_lock_bh(&wma->vdev_respq_lock); |
| list_for_each_entry_safe(req_msg, tmp, &wma->vdev_resp_queue, node) { |
| if (req_msg->vdev_id != vdev_id) |
| continue; |
| if (req_msg->type != type) |
| continue; |
| |
| found = true; |
| break; |
| } |
| adf_os_spin_unlock_bh(&wma->vdev_respq_lock); |
| if (!found) { |
| WMA_LOGP("%s: target request not found for vdev_id %d type %d", |
| __func__, vdev_id, type); |
| return NULL; |
| } |
| WMA_LOGD("%s: target request found for vdev id: %d type %d msg %d", |
| __func__, vdev_id, type, req_msg->msg_type); |
| return req_msg; |
| } |
| |
| /** |
| * wma_get_bpf_caps_event_handler() - Event handler for get bpf capability |
| * @handle: WMA global handle |
| * @cmd_param_info: command event data |
| * @len: Length of @cmd_param_info |
| * |
| * Return: 0 on Success or Errno on failure |
| */ |
| static int wma_get_bpf_caps_event_handler(void *handle, |
| u_int8_t *cmd_param_info, |
| u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle)handle; |
| WMI_BPF_CAPABILIY_INFO_EVENTID_param_tlvs *param_buf; |
| wmi_bpf_capability_info_evt_fixed_param *event; |
| struct sir_bpf_get_offload *bpf_get_offload; |
| tpAniSirGlobal pmac = (tpAniSirGlobal)vos_get_context( |
| VOS_MODULE_ID_PE, wma->vos_context); |
| |
| if (!pmac) { |
| WMA_LOGE("%s: Invalid pmac", __func__); |
| return -EINVAL; |
| } |
| if (!pmac->sme.pbpf_get_offload_cb) { |
| WMA_LOGE("%s: Callback not registered", __func__); |
| return -EINVAL; |
| } |
| |
| param_buf = (WMI_BPF_CAPABILIY_INFO_EVENTID_param_tlvs *)cmd_param_info; |
| event = param_buf->fixed_param; |
| bpf_get_offload = vos_mem_malloc(sizeof(*bpf_get_offload)); |
| |
| if (!bpf_get_offload) { |
| WMA_LOGP("%s: Memory allocation failed.", __func__); |
| return -ENOMEM; |
| } |
| |
| bpf_get_offload->bpf_version = event->bpf_version; |
| bpf_get_offload->max_bpf_filters = event->max_bpf_filters; |
| bpf_get_offload->max_bytes_for_bpf_inst = |
| event->max_bytes_for_bpf_inst; |
| WMA_LOGD("%s: BPF capabilities version: %d max bpf filter size: %d", |
| __func__, bpf_get_offload->bpf_version, |
| bpf_get_offload->max_bytes_for_bpf_inst); |
| |
| WMA_LOGD("%s: sending bpf capabilities event to hdd", __func__); |
| pmac->sme.pbpf_get_offload_cb(pmac->hHdd, bpf_get_offload); |
| vos_mem_free(bpf_get_offload); |
| return 0; |
| } |
| |
| /** |
| * wma_lost_link_info_handler() - collect lost link information and inform SME |
| * when disconnection in STA mode. |
| * @wma: WMA handle |
| * @vdev_id: vdev ID |
| * @rssi: rssi at disconnection time |
| * |
| * Return: none |
| */ |
| static void wma_lost_link_info_handler(tp_wma_handle wma, uint32_t vdev_id, |
| int8_t rssi) |
| { |
| struct sir_lost_link_info *lost_link_info; |
| VOS_STATUS vos_status; |
| vos_msg_t sme_msg = {0}; |
| /* report lost link information only for STA mode */ |
| if (wma->interfaces[vdev_id].vdev_up && |
| (WMI_VDEV_TYPE_STA == wma->interfaces[vdev_id].type) && |
| (0 == wma->interfaces[vdev_id].sub_type)) { |
| lost_link_info = vos_mem_malloc(sizeof(*lost_link_info)); |
| if (NULL == lost_link_info) { |
| WMA_LOGE("%s: failed to allocate memory", __func__); |
| return; |
| } |
| lost_link_info->vdev_id = vdev_id; |
| lost_link_info->rssi = rssi; |
| sme_msg.type = eWNI_SME_LOST_LINK_INFO_IND; |
| sme_msg.bodyptr = lost_link_info; |
| sme_msg.bodyval = 0; |
| WMA_LOGI("%s: post msg to SME, bss_idx %d, rssi %d", |
| __func__, |
| lost_link_info->vdev_id, |
| lost_link_info->rssi); |
| |
| vos_status = vos_mq_post_message(VOS_MODULE_ID_SME, &sme_msg); |
| if (!VOS_IS_STATUS_SUCCESS(vos_status)) { |
| WMA_LOGE("%s: fail to post msg to SME", |
| __func__); |
| vos_mem_free(lost_link_info); |
| } |
| } |
| } |
| |
| tSmpsModeValue host_map_smps_mode (A_UINT32 fw_smps_mode) |
| { |
| tSmpsModeValue smps_mode = SMPS_MODE_DISABLED; |
| switch (fw_smps_mode) { |
| case WMI_SMPS_FORCED_MODE_STATIC: |
| smps_mode = STATIC_SMPS_MODE; |
| break; |
| case WMI_SMPS_FORCED_MODE_DYNAMIC: |
| smps_mode = DYNAMIC_SMPS_MODE; |
| break; |
| default: |
| smps_mode = SMPS_MODE_DISABLED; |
| } |
| |
| return smps_mode; |
| } |
| |
| /** |
| * wma_smps_mode_to_force_mode_param() - Map smps mode to force |
| * mode commmand param |
| * @smps_mode: SMPS mode according to the protocol |
| * |
| * Return: int > 0 for success else failure |
| */ |
| static int wma_smps_mode_to_force_mode_param(uint8_t smps_mode) |
| { |
| int param = -EINVAL; |
| |
| switch (smps_mode) { |
| case STATIC_SMPS_MODE: |
| param = WMI_SMPS_FORCED_MODE_STATIC; |
| break; |
| case DYNAMIC_SMPS_MODE: |
| param = WMI_SMPS_FORCED_MODE_DYNAMIC; |
| break; |
| case SMPS_MODE_DISABLED: |
| param = WMI_SMPS_FORCED_MODE_DISABLED; |
| break; |
| default: |
| WMA_LOGE(FL("smps mode cannot be mapped :%d "), |
| smps_mode); |
| } |
| return param; |
| } |
| |
| #ifdef FEATURE_WLAN_AUTO_SHUTDOWN |
| /* function : wma_post_auto_shutdown_msg |
| * Description : function to post auto shutdown event to sme |
| */ |
| static int wma_post_auto_shutdown_msg(void) |
| { |
| tSirAutoShutdownEvtParams *auto_sh_evt; |
| VOS_STATUS vos_status; |
| vos_msg_t sme_msg = {0} ; |
| |
| auto_sh_evt = (tSirAutoShutdownEvtParams *) |
| vos_mem_malloc(sizeof(tSirAutoShutdownEvtParams)); |
| if (!auto_sh_evt) { |
| WMA_LOGE("%s: No Mem", __func__); |
| return -ENOMEM; |
| } |
| |
| auto_sh_evt->shutdown_reason = |
| WMI_HOST_AUTO_SHUTDOWN_REASON_TIMER_EXPIRY; |
| sme_msg.type = eWNI_SME_AUTO_SHUTDOWN_IND; |
| sme_msg.bodyptr = auto_sh_evt; |
| sme_msg.bodyval = 0; |
| |
| vos_status = vos_mq_post_message(VOS_MODULE_ID_SME, &sme_msg); |
| if ( !VOS_IS_STATUS_SUCCESS(vos_status) ) { |
| WMA_LOGE("Fail to post eWNI_SME_AUTO_SHUTDOWN_IND msg to SME"); |
| vos_mem_free(auto_sh_evt); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* function : wma_auto_shutdown_event_handler |
| * Description : function to process auto shutdown timer trigger |
| */ |
| static int wma_auto_shutdown_event_handler(void *handle, u_int8_t *event, |
| u_int32_t len) |
| { |
| wmi_host_auto_shutdown_event_fixed_param *wmi_auto_sh_evt; |
| WMI_HOST_AUTO_SHUTDOWN_EVENTID_param_tlvs *param_buf = |
| (WMI_HOST_AUTO_SHUTDOWN_EVENTID_param_tlvs *) |
| event; |
| |
| if (!param_buf || !param_buf->fixed_param) { |
| WMA_LOGE("%s:%d: Invalid Auto shutdown timer evt", __func__, |
| __LINE__); |
| return -EINVAL; |
| } |
| |
| |
| wmi_auto_sh_evt = param_buf->fixed_param; |
| |
| if (wmi_auto_sh_evt->shutdown_reason |
| != WMI_HOST_AUTO_SHUTDOWN_REASON_TIMER_EXPIRY) { |
| WMA_LOGE("%s:%d: Invalid Auto shutdown timer evt", __func__, |
| __LINE__); |
| return -EINVAL; |
| } |
| |
| WMA_LOGD("%s:%d: Auto Shutdown Evt: %d", __func__, __LINE__, |
| wmi_auto_sh_evt->shutdown_reason); |
| return(wma_post_auto_shutdown_msg()); |
| } |
| |
| /* function : wma_set_auto_shutdown_timer_req |
| * Description : function sets auto shutdown timer in firmware |
| * Args : wma handle, auto shutdown timer value |
| * Returns : status of wmi cmd |
| */ |
| static VOS_STATUS wma_set_auto_shutdown_timer_req(tp_wma_handle wma_handle, |
| tSirAutoShutdownCmdParams *auto_sh_cmd) |
| { |
| int status = 0; |
| wmi_buf_t buf = NULL; |
| u_int8_t *buf_ptr; |
| wmi_host_auto_shutdown_cfg_cmd_fixed_param *wmi_auto_sh_cmd; |
| int len = sizeof(wmi_host_auto_shutdown_cfg_cmd_fixed_param); |
| |
| if (auto_sh_cmd == NULL) { |
| WMA_LOGE("%s : Invalid Autoshutdown cfg cmd", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("%s: Set WMI_HOST_AUTO_SHUTDOWN_CFG_CMDID:TIMER_VAL=%d", |
| __func__, auto_sh_cmd->timer_val); |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| wmi_auto_sh_cmd = (wmi_host_auto_shutdown_cfg_cmd_fixed_param *)buf_ptr; |
| wmi_auto_sh_cmd->timer_value = auto_sh_cmd->timer_val; |
| |
| WMITLV_SET_HDR(&wmi_auto_sh_cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_host_auto_shutdown_cfg_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_host_auto_shutdown_cfg_cmd_fixed_param)); |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_HOST_AUTO_SHUTDOWN_CFG_CMDID); |
| if (status != EOK) { |
| WMA_LOGE("%s: WMI_HOST_AUTO_SHUTDOWN_CFG_CMDID Err %d", |
| __func__, status); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| #endif |
| |
| static void wma_vdev_start_rsp(tp_wma_handle wma, |
| tpAddBssParams add_bss, |
| wmi_vdev_start_response_event_fixed_param *resp_event) |
| { |
| struct beacon_info *bcn; |
| |
| #ifdef QCA_IBSS_SUPPORT |
| WMA_LOGD("%s: vdev start response received for %s mode", __func__, |
| add_bss->operMode == BSS_OPERATIONAL_MODE_IBSS ? "IBSS" : "non-IBSS"); |
| #endif |
| |
| if (resp_event->status) { |
| add_bss->status = VOS_STATUS_E_FAILURE; |
| goto send_fail_resp; |
| } |
| |
| if ((add_bss->operMode == BSS_OPERATIONAL_MODE_AP) |
| #ifdef QCA_IBSS_SUPPORT |
| || (add_bss->operMode == BSS_OPERATIONAL_MODE_IBSS) |
| #endif |
| ) { |
| wma->interfaces[resp_event->vdev_id].beacon = |
| vos_mem_malloc(sizeof(struct beacon_info)); |
| |
| bcn = wma->interfaces[resp_event->vdev_id].beacon; |
| if (!bcn) { |
| WMA_LOGE("%s: Failed alloc memory for beacon struct", |
| __func__); |
| add_bss->status = VOS_STATUS_E_FAILURE; |
| goto send_fail_resp; |
| } |
| vos_mem_zero(bcn, sizeof(*bcn)); |
| bcn->buf = adf_nbuf_alloc(NULL, WMA_BCN_BUF_MAX_SIZE, 0, |
| sizeof(u_int32_t), 0); |
| if (!bcn->buf) { |
| WMA_LOGE("%s: No memory allocated for beacon buffer", |
| __func__); |
| vos_mem_free(bcn); |
| add_bss->status = VOS_STATUS_E_FAILURE; |
| goto send_fail_resp; |
| } |
| bcn->seq_no = MIN_SW_SEQ; |
| adf_os_spinlock_init(&bcn->lock); |
| adf_os_atomic_set(&wma->interfaces[resp_event->vdev_id].bss_status, |
| WMA_BSS_STATUS_STARTED); |
| WMA_LOGD("%s: AP mode (type %d subtype %d) BSS is started", __func__, |
| wma->interfaces[resp_event->vdev_id].type, |
| wma->interfaces[resp_event->vdev_id].sub_type); |
| |
| WMA_LOGD("%s: Allocated beacon struct %pK, template memory %pK", |
| __func__, bcn, bcn->buf); |
| } |
| add_bss->status = VOS_STATUS_SUCCESS; |
| add_bss->bssIdx = resp_event->vdev_id; |
| add_bss->chainMask = resp_event->chain_mask; |
| add_bss->smpsMode = host_map_smps_mode(resp_event->smps_mode); |
| send_fail_resp: |
| WMA_LOGD("%s: Sending add bss rsp to umac(vdev %d status %d)", |
| __func__, resp_event->vdev_id, add_bss->status); |
| wma_send_msg(wma, WDA_ADD_BSS_RSP, (void *)add_bss, 0); |
| } |
| |
| static int wma_vdev_start_resp_handler(void *handle, u_int8_t *cmd_param_info, |
| u_int32_t len) |
| { |
| WMI_VDEV_START_RESP_EVENTID_param_tlvs *param_buf; |
| wmi_vdev_start_response_event_fixed_param *resp_event; |
| u_int8_t *buf; |
| vos_msg_t vos_msg = {0}; |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| ol_txrx_pdev_handle pdev = NULL; |
| |
| WMA_LOGI("%s: Enter", __func__); |
| param_buf = (WMI_VDEV_START_RESP_EVENTID_param_tlvs *) cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGE("Invalid start response event buffer"); |
| return -EINVAL; |
| } |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| |
| if (pdev == NULL) { |
| WMA_LOGE("vdev start resp fail as pdev is NULL"); |
| return -EINVAL; |
| } |
| |
| resp_event = param_buf->fixed_param; |
| buf = vos_mem_malloc(sizeof(wmi_vdev_start_response_event_fixed_param)); |
| if (!buf) { |
| WMA_LOGE("%s: Failed alloc memory for buf", __func__); |
| return -EINVAL; |
| } |
| |
| if (wma_is_vdev_in_ap_mode(wma, resp_event->vdev_id)) { |
| adf_os_spin_lock_bh(&wma->dfs_ic->chan_lock); |
| wma->dfs_ic->disable_phy_err_processing = false; |
| adf_os_spin_unlock_bh(&wma->dfs_ic->chan_lock); |
| } |
| |
| if (wma->pause_other_vdev_on_mcc_start) { |
| WMA_LOGD("%s: unpause other vdevs since paused when MCC start", __func__); |
| wma->pause_other_vdev_on_mcc_start = false; |
| wdi_in_pdev_unpause_other_vdev(pdev, |
| OL_TXQ_PAUSE_REASON_MCC_VDEV_START, |
| resp_event->vdev_id); |
| } |
| |
| vos_mem_zero(buf, sizeof(wmi_vdev_start_response_event_fixed_param)); |
| vos_mem_copy(buf, (u_int8_t *)resp_event, |
| sizeof(wmi_vdev_start_response_event_fixed_param)); |
| |
| vos_msg.type = WDA_VDEV_START_RSP_IND; |
| vos_msg.bodyptr = buf; |
| vos_msg.bodyval = 0; |
| |
| if (VOS_STATUS_SUCCESS != |
| vos_mq_post_message(VOS_MQ_ID_WDA, &vos_msg)) { |
| WMA_LOGP("%s: Failed to post WDA_VDEV_START_RSP_IND msg", __func__); |
| vos_mem_free(buf); |
| return -1; |
| } |
| WMA_LOGD("WDA_VDEV_START_RSP_IND posted"); |
| return 0; |
| } |
| |
| #ifdef FEATURE_AP_MCC_CH_AVOIDANCE |
| /** |
| * wma_find_mcc_ap() - finds if device is operating AP in MCC mode or not |
| * @wma: wma handle. |
| * @vdev_id: vdev ID of device for which MCC has to be checked |
| * @add: flag indicating if current device is added or deleted |
| * |
| * This function parses through all the interfaces in wma and finds if |
| * any of those devces are in MCC mode with AP. If such a vdev is found |
| * involved AP vdevs are sent WDA_UPDATE_Q2Q_IE_IND msg to update their |
| * beacon template to include Q2Q IE. |
| * |
| * Return: void |
| */ |
| void wma_find_mcc_ap(tp_wma_handle wma, |
| uint8_t vdev_id, |
| bool add) |
| { |
| uint8_t i; |
| uint16_t prev_ch_freq = 0; |
| bool is_ap = false; |
| bool result = false; |
| uint8_t * ap_vdev_ids = NULL; |
| uint8_t num_ch = 0; |
| |
| ap_vdev_ids = vos_mem_malloc(wma->max_bssid); |
| if (!ap_vdev_ids) { |
| return; |
| } |
| |
| for(i = 0; i < wma->max_bssid; i++) { |
| ap_vdev_ids[i] = -1; |
| if( add == false && i == vdev_id) |
| continue; |
| |
| if( wma->interfaces[i].vdev_up || (i == vdev_id && add) ) { |
| |
| if(wma->interfaces[i].type == WMI_VDEV_TYPE_AP) { |
| is_ap = true; |
| ap_vdev_ids[i] = i; |
| } |
| |
| if(wma->interfaces[i].mhz != prev_ch_freq) { |
| num_ch++; |
| prev_ch_freq = wma->interfaces[i].mhz; |
| } |
| } |
| } |
| |
| if( is_ap && (num_ch > 1) ) |
| result = true; |
| else |
| result = false; |
| |
| wma_send_msg(wma, WDA_UPDATE_Q2Q_IE_IND, (void*)ap_vdev_ids, result); |
| } |
| #endif /* FEATURE_AP_MCC_CH_AVOIDANCE */ |
| |
| static const wmi_channel_width mode_to_width[MODE_MAX] = |
| { |
| [MODE_11A] = WMI_CHAN_WIDTH_20, |
| [MODE_11G] = WMI_CHAN_WIDTH_20, |
| [MODE_11B] = WMI_CHAN_WIDTH_20, |
| [MODE_11GONLY] = WMI_CHAN_WIDTH_20, |
| [MODE_11NA_HT20] = WMI_CHAN_WIDTH_20, |
| [MODE_11NG_HT20] = WMI_CHAN_WIDTH_20, |
| [MODE_11AC_VHT20] = WMI_CHAN_WIDTH_20, |
| [MODE_11AC_VHT20_2G] = WMI_CHAN_WIDTH_20, |
| [MODE_11NA_HT40] = WMI_CHAN_WIDTH_40, |
| [MODE_11NG_HT40] = WMI_CHAN_WIDTH_40, |
| [MODE_11AC_VHT40] = WMI_CHAN_WIDTH_40, |
| [MODE_11AC_VHT40_2G] = WMI_CHAN_WIDTH_40, |
| [MODE_11AC_VHT80] = WMI_CHAN_WIDTH_80, |
| #if CONFIG_160MHZ_SUPPORT |
| [MODE_11AC_VHT80_80] = WMI_CHAN_WIDTH_80P80, |
| [MODE_11AC_VHT160] = WMI_CHAN_WIDTH_160, |
| #endif |
| }; |
| |
| /** |
| * chanmode_to_chanwidth() - get channel width through channel mode |
| * @chanmode: channel phy mode |
| * |
| * Return: channel width |
| */ |
| static wmi_channel_width chanmode_to_chanwidth(WLAN_PHY_MODE chanmode) |
| { |
| wmi_channel_width chan_width; |
| |
| if (chanmode >= MODE_11A && chanmode < MODE_MAX) |
| chan_width = mode_to_width[chanmode]; |
| else |
| chan_width = WMI_CHAN_WIDTH_20; |
| |
| return chan_width; |
| } |
| |
| static int wma_vdev_start_rsp_ind(tp_wma_handle wma, u_int8_t *buf) |
| { |
| struct wma_target_req *req_msg; |
| struct wma_txrx_node *iface; |
| int err; |
| wmi_channel_width chanwidth; |
| |
| wmi_vdev_start_response_event_fixed_param *resp_event; |
| #ifdef FEATURE_AP_MCC_CH_AVOIDANCE |
| tpAniSirGlobal mac_ctx = (tpAniSirGlobal)vos_get_context( |
| VOS_MODULE_ID_PE, |
| wma->vos_context); |
| if (NULL == mac_ctx) { |
| WMA_LOGE("%s: Failed to get mac_ctx", __func__); |
| return -EINVAL; |
| } |
| #endif /* FEATURE_AP_MCC_CH_AVOIDANCE */ |
| |
| resp_event = (wmi_vdev_start_response_event_fixed_param *)buf; |
| |
| if (!resp_event) { |
| WMA_LOGE("Invalid start response event buffer"); |
| return -EINVAL; |
| } |
| |
| iface = &wma->interfaces[resp_event->vdev_id]; |
| |
| if ((resp_event->vdev_id <= wma->max_bssid) && |
| (adf_os_atomic_read( |
| &wma->interfaces[resp_event->vdev_id].vdev_restart_params.hidden_ssid_restart_in_progress)) && |
| (wma_is_vdev_in_ap_mode(wma, resp_event->vdev_id) == true)) { |
| WMA_LOGE( |
| "%s: vdev restart event recevied for hidden ssid set using IOCTL", |
| __func__); |
| |
| if (wmi_unified_vdev_up_send(wma->wmi_handle, resp_event->vdev_id, 0, |
| wma->interfaces[resp_event->vdev_id].bssid) < 0) { |
| WMA_LOGE("%s : failed to send vdev up", __func__); |
| return -EEXIST; |
| } |
| adf_os_atomic_set( |
| &wma->interfaces[resp_event->vdev_id].vdev_restart_params.hidden_ssid_restart_in_progress, 0); |
| wma->interfaces[resp_event->vdev_id].vdev_up = TRUE; |
| |
| /* |
| * Unpause TX queue in SAP case while configuring hidden ssid |
| * enable or disable, else the data path is paused forever |
| * causing data packets(starting from DHCP offer) to get stuck |
| */ |
| wdi_in_vdev_unpause(iface->handle, |
| OL_TXQ_PAUSE_REASON_VDEV_STOP); |
| iface->pause_bitmap &= ~(1 << PAUSE_TYPE_HOST); |
| |
| } |
| |
| req_msg = wma_find_vdev_req(wma, resp_event->vdev_id, |
| WMA_TARGET_REQ_TYPE_VDEV_START); |
| |
| if (!req_msg) { |
| WMA_LOGE("%s: Failed to lookup request message for vdev %d", |
| __func__, resp_event->vdev_id); |
| return -EINVAL; |
| } |
| |
| vos_timer_stop(&req_msg->event_timeout); |
| |
| #ifdef FEATURE_AP_MCC_CH_AVOIDANCE |
| if (resp_event->status == VOS_STATUS_SUCCESS |
| && mac_ctx->sap.sap_channel_avoidance) |
| wma_find_mcc_ap(wma, resp_event->vdev_id, true); |
| #endif /* FEATURE_AP_MCC_CH_AVOIDANCE */ |
| |
| if (req_msg->msg_type == WDA_CHNL_SWITCH_REQ) { |
| tpSwitchChannelParams params = |
| (tpSwitchChannelParams) req_msg->user_data; |
| if(!params) { |
| WMA_LOGE("%s: channel switch params is NULL for vdev %d", |
| __func__, resp_event->vdev_id); |
| return -EINVAL; |
| } |
| |
| WMA_LOGD("%s: Send channel switch resp vdev %d status %d", |
| __func__, resp_event->vdev_id, resp_event->status); |
| params->chainMask = resp_event->chain_mask; |
| params->smpsMode = host_map_smps_mode(resp_event->smps_mode); |
| params->status = resp_event->status; |
| if (wma->interfaces[resp_event->vdev_id].is_channel_switch) |
| wma->interfaces[resp_event->vdev_id].is_channel_switch = |
| VOS_FALSE; |
| if (((resp_event->resp_type == WMI_VDEV_RESTART_RESP_EVENT) && |
| (iface->type == WMI_VDEV_TYPE_STA)) || |
| ((resp_event->resp_type == WMI_VDEV_START_RESP_EVENT) && |
| (iface->type == WMI_VDEV_TYPE_MONITOR))) { |
| |
| err = wma_set_peer_param(wma, iface->bssid, |
| WMI_PEER_PHYMODE, iface->chanmode, |
| resp_event->vdev_id); |
| |
| WMA_LOGD("%s:vdev_id %d chanmode %d status %d", |
| __func__, resp_event->vdev_id, |
| iface->chanmode, err); |
| |
| chanwidth = chanmode_to_chanwidth(iface->chanmode); |
| err = wma_set_peer_param(wma, iface->bssid, |
| WMI_PEER_CHWIDTH, chanwidth, |
| resp_event->vdev_id); |
| |
| WMA_LOGD("%s:vdev_id %d chanwidth %d status %d", |
| __func__, resp_event->vdev_id, |
| chanwidth, err); |
| |
| if (wmi_unified_vdev_up_send(wma->wmi_handle, |
| resp_event->vdev_id, iface->aid, |
| iface->bssid)) { |
| WMA_LOGE("%s:vdev_up failed vdev_id %d", |
| __func__, resp_event->vdev_id); |
| wma->interfaces[resp_event->vdev_id].vdev_up = |
| FALSE; |
| } else { |
| wma->interfaces[resp_event->vdev_id].vdev_up = |
| TRUE; |
| } |
| } |
| |
| wma_send_msg(wma, WDA_SWITCH_CHANNEL_RSP, (void *)params, 0); |
| } else if (req_msg->msg_type == WDA_ADD_BSS_REQ) { |
| tpAddBssParams bssParams = (tpAddBssParams) req_msg->user_data; |
| vos_mem_copy(iface->bssid, bssParams->bssId, ETH_ALEN); |
| wma_vdev_start_rsp(wma, bssParams, resp_event); |
| } else if (req_msg->msg_type == WDA_OCB_SET_CONFIG_CMD) { |
| if (wmi_unified_vdev_up_send(wma->wmi_handle, |
| resp_event->vdev_id, iface->aid, |
| iface->bssid) < 0) { |
| WMA_LOGE(FL("failed to send vdev up")); |
| return -EEXIST; |
| } |
| iface->vdev_up = TRUE; |
| |
| wma_ocb_start_resp_ind_cont(wma); |
| } |
| |
| |
| if ((wma->interfaces[resp_event->vdev_id].type == WMI_VDEV_TYPE_AP) && |
| wma->interfaces[resp_event->vdev_id].vdev_up) |
| wma_set_sap_keepalive(wma, resp_event->vdev_id); |
| |
| vos_timer_destroy(&req_msg->event_timeout); |
| adf_os_mem_free(req_msg); |
| |
| return 0; |
| } |
| |
| #define BIG_ENDIAN_MAX_DEBUG_BUF 500 |
| |
| /* function : wma_unified_debug_print_event_handler |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| static int wma_unified_debug_print_event_handler(void *handle, u_int8_t *datap, |
| u_int32_t len) |
| { |
| WMI_DEBUG_PRINT_EVENTID_param_tlvs *param_buf; |
| u_int8_t *data; |
| u_int32_t datalen; |
| |
| param_buf = (WMI_DEBUG_PRINT_EVENTID_param_tlvs *)datap; |
| if (!param_buf) { |
| WMA_LOGE("Get NULL point message from FW"); |
| return -ENOMEM; |
| } |
| data = param_buf->data; |
| datalen = param_buf->num_data; |
| |
| #ifdef BIG_ENDIAN_HOST |
| { |
| if (datalen > BIG_ENDIAN_MAX_DEBUG_BUF) { |
| WMA_LOGE("%s Invalid data len %d, limiting to max", |
| __func__, datalen); |
| datalen = BIG_ENDIAN_MAX_DEBUG_BUF; |
| } |
| |
| char dbgbuf[BIG_ENDIAN_MAX_DEBUG_BUF] = { 0 }; |
| memcpy(dbgbuf, data, datalen); |
| SWAPME(dbgbuf, datalen); |
| WMA_LOGD("FIRMWARE:%s", dbgbuf); |
| return 0; |
| } |
| #else |
| WMA_LOGD("FIRMWARE:%s", data); |
| return 0; |
| #endif |
| } |
| |
| int wmi_unified_vdev_set_param_send(wmi_unified_t wmi_handle, u_int32_t if_id, |
| u_int32_t param_id, u_int32_t param_value) |
| { |
| int ret; |
| wmi_vdev_set_param_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| u_int16_t len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| cmd = (wmi_vdev_set_param_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_set_param_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vdev_set_param_cmd_fixed_param)); |
| cmd->vdev_id = if_id; |
| cmd->param_id = param_id; |
| cmd->param_value = param_value; |
| WMA_LOGD("Setting vdev %d param = %x, value = %u", |
| if_id, param_id, param_value); |
| ret = wmi_unified_cmd_send(wmi_handle, buf, len, |
| WMI_VDEV_SET_PARAM_CMDID); |
| if (ret < 0) { |
| WMA_LOGE("Failed to send set param command ret = %d", ret); |
| wmi_buf_free(buf); |
| } |
| return ret; |
| } |
| |
| VOS_STATUS wma_roam_scan_bmiss_cnt(tp_wma_handle wma_handle, |
| A_INT32 first_bcnt, |
| A_UINT32 final_bcnt, |
| u_int32_t vdev_id) |
| { |
| int status = 0; |
| |
| WMA_LOGI("%s: first_bcnt=%d, final_bcnt=%d", __func__, |
| first_bcnt, final_bcnt); |
| |
| status = wmi_unified_vdev_set_param_send(wma_handle->wmi_handle, |
| vdev_id, |
| WMI_VDEV_PARAM_BMISS_FIRST_BCNT, |
| first_bcnt); |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_vdev_set_param_send" |
| "WMI_VDEV_PARAM_BMISS_FIRST_BCNT returned Error %d",status); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| status = wmi_unified_vdev_set_param_send(wma_handle->wmi_handle, |
| vdev_id, |
| WMI_VDEV_PARAM_BMISS_FINAL_BCNT, |
| final_bcnt); |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_vdev_set_param_send" |
| "WMI_VDEV_PARAM_BMISS_FINAL_BCNT returned Error %d",status); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static v_VOID_t wma_set_default_tgt_config(tp_wma_handle wma_handle) |
| { |
| struct ol_softc *scn; |
| u_int8_t no_of_peers_supported; |
| wmi_resource_config tgt_cfg = { |
| 0, /* Filling zero for TLV Tag and Length fields */ |
| CFG_TGT_NUM_VDEV, |
| CFG_TGT_NUM_PEERS + CFG_TGT_NUM_VDEV + 2, |
| CFG_TGT_NUM_OFFLOAD_PEERS, |
| CFG_TGT_NUM_OFFLOAD_REORDER_BUFFS, |
| CFG_TGT_NUM_PEER_KEYS, |
| CFG_TGT_NUM_TIDS, |
| CFG_TGT_AST_SKID_LIMIT, |
| CFG_TGT_DEFAULT_TX_CHAIN_MASK, |
| CFG_TGT_DEFAULT_RX_CHAIN_MASK, |
| { CFG_TGT_RX_TIMEOUT_LO_PRI, CFG_TGT_RX_TIMEOUT_LO_PRI, CFG_TGT_RX_TIMEOUT_LO_PRI, CFG_TGT_RX_TIMEOUT_HI_PRI }, |
| CFG_TGT_RX_DECAP_MODE, |
| CFG_TGT_DEFAULT_SCAN_MAX_REQS, |
| CFG_TGT_DEFAULT_BMISS_OFFLOAD_MAX_VDEV, |
| CFG_TGT_DEFAULT_ROAM_OFFLOAD_MAX_VDEV, |
| CFG_TGT_DEFAULT_ROAM_OFFLOAD_MAX_PROFILES, |
| CFG_TGT_DEFAULT_NUM_MCAST_GROUPS, |
| CFG_TGT_DEFAULT_NUM_MCAST_TABLE_ELEMS, |
| CFG_TGT_DEFAULT_MCAST2UCAST_MODE, |
| CFG_TGT_DEFAULT_TX_DBG_LOG_SIZE, |
| CFG_TGT_WDS_ENTRIES, |
| CFG_TGT_DEFAULT_DMA_BURST_SIZE, |
| CFG_TGT_DEFAULT_MAC_AGGR_DELIM, |
| CFG_TGT_DEFAULT_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK, |
| CFG_TGT_DEFAULT_VOW_CONFIG, |
| CFG_TGT_DEFAULT_GTK_OFFLOAD_MAX_VDEV, |
| CFG_TGT_NUM_MSDU_DESC, |
| CFG_TGT_MAX_FRAG_TABLE_ENTRIES, |
| CFG_TGT_NUM_TDLS_VDEVS, |
| CFG_TGT_NUM_TDLS_CONN_TABLE_ENTRIES, |
| CFG_TGT_DEFAULT_BEACON_TX_OFFLOAD_MAX_VDEV, |
| CFG_TGT_MAX_MULTICAST_FILTER_ENTRIES, |
| 0, |
| 0, |
| 0, |
| CFG_TGT_NUM_TDLS_CONC_SLEEP_STAS, |
| CFG_TGT_NUM_TDLS_CONC_BUFFER_STAS, |
| 0, |
| CFG_TGT_NUM_OCB_VDEVS, |
| CFG_TGT_NUM_OCB_CHANNELS, |
| CFG_TGT_NUM_OCB_SCHEDULES, |
| }; |
| |
| /* Update the max number of peers */ |
| scn = vos_get_context(VOS_MODULE_ID_HIF, wma_handle->vos_context); |
| if (!scn) { |
| WMA_LOGE("%s: vos_context is NULL", __func__); |
| return; |
| } |
| no_of_peers_supported = ol_get_number_of_peers_supported(scn); |
| tgt_cfg.num_peers = no_of_peers_supported + CFG_TGT_NUM_VDEV + 2; |
| #if defined(CONFIG_HL_SUPPORT) |
| tgt_cfg.num_tids = 4 * no_of_peers_supported; |
| #else |
| tgt_cfg.num_tids = (2 * (no_of_peers_supported + CFG_TGT_NUM_VDEV + 2)); |
| #endif |
| |
| WMITLV_SET_HDR(&tgt_cfg.tlv_header,WMITLV_TAG_STRUC_wmi_resource_config, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_resource_config)); |
| /* reduce the peer/vdev if CFG_TGT_NUM_MSDU_DESC exceeds 1000 */ |
| #ifdef PERE_IP_HDR_ALIGNMENT_WAR |
| if (scn->host_80211_enable) { |
| /* |
| * To make the IP header begins at dword aligned address, |
| * we make the decapsulation mode as Native Wifi. |
| */ |
| tgt_cfg.rx_decap_mode = CFG_TGT_RX_DECAP_MODE_NWIFI; |
| } |
| #endif |
| if (VOS_MONITOR_MODE == vos_get_conparam()) |
| tgt_cfg.rx_decap_mode = CFG_TGT_RX_DECAP_MODE_RAW; |
| |
| wma_handle->wlan_resource_config = tgt_cfg; |
| } |
| |
| static int32_t wmi_unified_peer_delete_send(wmi_unified_t wmi, |
| u_int8_t peer_addr[IEEE80211_ADDR_LEN], |
| u_int8_t vdev_id) |
| { |
| wmi_peer_delete_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wmi, len); |
| if (!buf) { |
| WMA_LOGP("%s: wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| cmd = (wmi_peer_delete_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_peer_delete_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_peer_delete_cmd_fixed_param)); |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(peer_addr, &cmd->peer_macaddr); |
| cmd->vdev_id = vdev_id; |
| |
| if (wmi_unified_cmd_send(wmi, buf, len, WMI_PEER_DELETE_CMDID)) { |
| WMA_LOGP("%s: Failed to send peer delete command", __func__); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| WMA_LOGD("%s: peer_addr %pM vdev_id %d", __func__, peer_addr, vdev_id); |
| return 0; |
| } |
| |
| static int32_t wmi_unified_peer_flush_tids_send(wmi_unified_t wmi, |
| u_int8_t peer_addr |
| [IEEE80211_ADDR_LEN], |
| u_int32_t peer_tid_bitmap, |
| u_int8_t vdev_id) |
| { |
| wmi_peer_flush_tids_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wmi, len); |
| if (!buf) { |
| WMA_LOGP("%s: wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| cmd = (wmi_peer_flush_tids_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_peer_flush_tids_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_peer_flush_tids_cmd_fixed_param)); |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(peer_addr, &cmd->peer_macaddr); |
| cmd->peer_tid_bitmap = peer_tid_bitmap; |
| cmd->vdev_id = vdev_id; |
| |
| if (wmi_unified_cmd_send(wmi, buf, len, WMI_PEER_FLUSH_TIDS_CMDID)) { |
| WMA_LOGP("%s: Failed to send flush tid command", __func__); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| WMA_LOGD("%s: peer_addr %pM vdev_id %d", __func__, peer_addr, vdev_id); |
| return 0; |
| } |
| |
| void wma_remove_peer(tp_wma_handle wma, u_int8_t *bssid, |
| u_int8_t vdev_id, ol_txrx_peer_handle peer, |
| v_BOOL_t roam_synch_in_progress) |
| { |
| #define PEER_ALL_TID_BITMASK 0xffffffff |
| u_int32_t peer_tid_bitmap = PEER_ALL_TID_BITMASK; |
| u_int8_t *peer_addr = bssid; |
| if (!wma->interfaces[vdev_id].peer_count) |
| { |
| WMA_LOGE("%s: Can't remove peer with peer_addr %pM vdevid %d peer_count %d", |
| __func__, bssid, vdev_id, wma->interfaces[vdev_id].peer_count); |
| return; |
| } |
| |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| if (roam_synch_in_progress) { |
| WMA_LOGE("%s:LFR3:Removing peer with addr %pM vdevid %d peer_cnt %d", |
| __func__, bssid, vdev_id, wma->interfaces[vdev_id].peer_count); |
| goto peer_detach; |
| } else { |
| WMA_LOGI("%s: Removing peer with addr %pM vdevid %d peer_count %d", |
| __func__, bssid, vdev_id, wma->interfaces[vdev_id].peer_count); |
| } |
| #endif |
| /* Flush all TIDs except MGMT TID for this peer in Target */ |
| peer_tid_bitmap &= ~(0x1 << WMI_MGMT_TID); |
| wmi_unified_peer_flush_tids_send(wma->wmi_handle, bssid, |
| peer_tid_bitmap, vdev_id); |
| |
| #if defined(QCA_IBSS_SUPPORT) |
| if ((peer) && (wma_is_vdev_in_ibss_mode(wma, vdev_id))) { |
| WMA_LOGD("%s: bssid %pM peer->mac_addr %pM", __func__, |
| bssid, peer->mac_addr.raw); |
| peer_addr = peer->mac_addr.raw; |
| } |
| #endif |
| |
| wmi_unified_peer_delete_send(wma->wmi_handle, peer_addr, vdev_id); |
| |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| peer_detach: |
| #endif |
| if (peer) |
| ol_txrx_peer_detach(peer); |
| wma->interfaces[vdev_id].peer_count--; |
| |
| #undef PEER_ALL_TID_BITMASK |
| } |
| |
| static int wma_peer_sta_kickout_event_handler(void *handle, u8 *event, u32 len) |
| { |
| tp_wma_handle wma = (tp_wma_handle)handle; |
| WMI_PEER_STA_KICKOUT_EVENTID_param_tlvs *param_buf = NULL; |
| wmi_peer_sta_kickout_event_fixed_param *kickout_event = NULL; |
| u_int8_t vdev_id, peer_id, macaddr[IEEE80211_ADDR_LEN]; |
| ol_txrx_peer_handle peer; |
| ol_txrx_pdev_handle pdev; |
| tpDeleteStaContext del_sta_ctx; |
| tpSirIbssPeerInactivityInd p_inactivity; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| param_buf = (WMI_PEER_STA_KICKOUT_EVENTID_param_tlvs *) event; |
| kickout_event = param_buf->fixed_param; |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| if (!pdev) { |
| WMA_LOGE("%s: pdev is NULL", __func__); |
| return -EINVAL; |
| } |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&kickout_event->peer_macaddr, macaddr); |
| peer = ol_txrx_find_peer_by_addr(pdev, macaddr, &peer_id); |
| if (!peer) { |
| WMA_LOGE("PEER [%pM] not found", macaddr); |
| return -EINVAL; |
| } |
| |
| if (tl_shim_get_vdevid(peer, &vdev_id) != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Not able to find BSSID for peer [%pM]", macaddr); |
| return -EINVAL; |
| } |
| |
| WMA_LOGA("%s: PEER:[%pM], ADDR:[%pN], INTERFACE:%d, peer_id:%d, reason:%d", |
| __func__, macaddr, |
| wma->interfaces[vdev_id].addr, vdev_id, |
| peer_id, kickout_event->reason); |
| |
| switch (kickout_event->reason) { |
| case WMI_PEER_STA_KICKOUT_REASON_IBSS_DISCONNECT: |
| p_inactivity = (tpSirIbssPeerInactivityInd) |
| vos_mem_malloc(sizeof(tSirIbssPeerInactivityInd)); |
| if (!p_inactivity) { |
| WMA_LOGE("VOS MEM Alloc Failed for tSirIbssPeerInactivity"); |
| return -EINVAL; |
| } |
| |
| p_inactivity->staIdx = peer_id; |
| vos_mem_copy(p_inactivity->peerAddr, macaddr, IEEE80211_ADDR_LEN); |
| wma_send_msg(wma, WDA_IBSS_PEER_INACTIVITY_IND, (void *)p_inactivity, 0); |
| goto exit_handler; |
| break; |
| |
| #ifdef FEATURE_WLAN_TDLS |
| case WMI_PEER_STA_KICKOUT_REASON_TDLS_DISCONNECT: |
| del_sta_ctx = |
| (tpDeleteStaContext)vos_mem_malloc(sizeof(tDeleteStaContext)); |
| if (!del_sta_ctx) { |
| WMA_LOGE("%s: mem alloc failed for tDeleteStaContext for TDLS peer: %pM", |
| __func__, macaddr); |
| return -EINVAL; |
| } |
| |
| del_sta_ctx->is_tdls = true; |
| del_sta_ctx->vdev_id = vdev_id; |
| del_sta_ctx->staId = peer_id; |
| vos_mem_copy(del_sta_ctx->addr2, macaddr, IEEE80211_ADDR_LEN); |
| vos_mem_copy(del_sta_ctx->bssId, wma->interfaces[vdev_id].bssid, |
| IEEE80211_ADDR_LEN); |
| del_sta_ctx->reasonCode = HAL_DEL_STA_REASON_CODE_KEEP_ALIVE; |
| wma_send_msg(wma, SIR_LIM_DELETE_STA_CONTEXT_IND, (void *)del_sta_ctx, |
| 0); |
| goto exit_handler; |
| break; |
| #endif /* FEATURE_WLAN_TDLS */ |
| |
| case WMI_PEER_STA_KICKOUT_REASON_XRETRY: |
| if(wma->interfaces[vdev_id].type == WMI_VDEV_TYPE_STA && |
| (wma->interfaces[vdev_id].sub_type == 0 || |
| wma->interfaces[vdev_id].sub_type == |
| WMI_UNIFIED_VDEV_SUBTYPE_P2P_CLIENT) && |
| vos_mem_compare(wma->interfaces[vdev_id].bssid, |
| macaddr, ETH_ALEN)) { |
| /* |
| * KICKOUT event is for current station-AP connection. |
| * Treat it like final beacon miss. Station may not have |
| * missed beacons but not able to transmit frames to AP |
| * for a long time. Must disconnect to get out of |
| * this sticky situation. |
| * In future implementation, roaming module will also |
| * handle this event and perform a scan. |
| */ |
| WMA_LOGW("%s: WMI_PEER_STA_KICKOUT_REASON_XRETRY event for STA", |
| __func__); |
| wma_beacon_miss_handler(wma, vdev_id, kickout_event->rssi); |
| goto exit_handler; |
| } |
| break; |
| |
| case WMI_PEER_STA_KICKOUT_REASON_UNSPECIFIED: |
| /* |
| * Default legacy value used by original firmware implementation. |
| */ |
| if(wma->interfaces[vdev_id].type == WMI_VDEV_TYPE_STA && |
| (wma->interfaces[vdev_id].sub_type == 0 || |
| wma->interfaces[vdev_id].sub_type == |
| WMI_UNIFIED_VDEV_SUBTYPE_P2P_CLIENT) && |
| vos_mem_compare(wma->interfaces[vdev_id].bssid, |
| macaddr, ETH_ALEN)) { |
| /* |
| * KICKOUT event is for current station-AP connection. |
| * Treat it like final beacon miss. Station may not have |
| * missed beacons but not able to transmit frames to AP |
| * for a long time. Must disconnect to get out of |
| * this sticky situation. |
| * In future implementation, roaming module will also |
| * handle this event and perform a scan. |
| */ |
| WMA_LOGW("%s: WMI_PEER_STA_KICKOUT_REASON_UNSPECIFIED event for STA", |
| __func__); |
| wma_beacon_miss_handler(wma, vdev_id, kickout_event->rssi); |
| goto exit_handler; |
| } |
| break; |
| |
| case WMI_PEER_STA_KICKOUT_REASON_INACTIVITY: |
| /* This could be for STA or SAP role */ |
| default: |
| break; |
| } |
| |
| /* |
| * default action is to send delete station context indication to LIM |
| */ |
| del_sta_ctx = (tpDeleteStaContext)vos_mem_malloc(sizeof(tDeleteStaContext)); |
| if (!del_sta_ctx) { |
| WMA_LOGE("VOS MEM Alloc Failed for tDeleteStaContext"); |
| return -EINVAL; |
| } |
| |
| del_sta_ctx->is_tdls = false; |
| del_sta_ctx->vdev_id = vdev_id; |
| del_sta_ctx->staId = peer_id; |
| vos_mem_copy(del_sta_ctx->addr2, macaddr, IEEE80211_ADDR_LEN); |
| vos_mem_copy(del_sta_ctx->bssId, wma->interfaces[vdev_id].addr, |
| IEEE80211_ADDR_LEN); |
| del_sta_ctx->reasonCode = HAL_DEL_STA_REASON_CODE_KEEP_ALIVE; |
| del_sta_ctx->rssi = kickout_event->rssi + WMA_TGT_NOISE_FLOOR_DBM; |
| wma_send_msg(wma, SIR_LIM_DELETE_STA_CONTEXT_IND, (void *)del_sta_ctx, 0); |
| wma_lost_link_info_handler(wma, vdev_id, kickout_event->rssi + |
| WMA_TGT_NOISE_FLOOR_DBM); |
| |
| exit_handler: |
| WMA_LOGD("%s: Exit", __func__); |
| return 0; |
| } |
| |
| static int wmi_unified_vdev_down_send(wmi_unified_t wmi, u_int8_t vdev_id) |
| { |
| wmi_vdev_down_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wmi, len); |
| if (!buf) { |
| WMA_LOGP("%s : wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| cmd = (wmi_vdev_down_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_down_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_vdev_down_cmd_fixed_param)); |
| cmd->vdev_id = vdev_id; |
| if (wmi_unified_cmd_send(wmi, buf, len, WMI_VDEV_DOWN_CMDID)) { |
| WMA_LOGP("%s: Failed to send vdev down", __func__); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| WMA_LOGD("%s: vdev_id %d", __func__, vdev_id); |
| return 0; |
| } |
| |
| #ifdef QCA_IBSS_SUPPORT |
| static void wma_delete_all_ibss_peers(tp_wma_handle wma, A_UINT32 vdev_id) |
| { |
| ol_txrx_vdev_handle vdev; |
| ol_txrx_peer_handle peer, temp; |
| |
| if (!wma || vdev_id > wma->max_bssid) |
| return; |
| |
| vdev = wma->interfaces[vdev_id].handle; |
| if (!vdev) |
| return; |
| |
| /* remove all remote peers of IBSS */ |
| adf_os_spin_lock_bh(&vdev->pdev->peer_ref_mutex); |
| |
| temp = NULL; |
| TAILQ_FOREACH_REVERSE(peer, &vdev->peer_list, peer_list_t, peer_list_elem) { |
| if (temp) { |
| adf_os_spin_unlock_bh(&vdev->pdev->peer_ref_mutex); |
| if (adf_os_atomic_read(&temp->delete_in_progress) == 0){ |
| wma_remove_peer(wma, temp->mac_addr.raw, |
| vdev_id, temp, VOS_FALSE); |
| } |
| adf_os_spin_lock_bh(&vdev->pdev->peer_ref_mutex); |
| } |
| /* self peer is deleted last */ |
| if (peer == TAILQ_FIRST(&vdev->peer_list)) { |
| WMA_LOGE("%s: self peer removed by caller ", __func__); |
| break; |
| } else |
| temp = peer; |
| } |
| adf_os_spin_unlock_bh(&vdev->pdev->peer_ref_mutex); |
| |
| /* remove IBSS bss peer last */ |
| peer = TAILQ_FIRST(&vdev->peer_list); |
| wma_remove_peer(wma, wma->interfaces[vdev_id].bssid, vdev_id, peer, |
| VOS_FALSE); |
| |
| } |
| #endif //#ifdef QCA_IBSS_SUPPORT |
| |
| static void wma_delete_all_ap_remote_peers(tp_wma_handle wma, A_UINT32 vdev_id) |
| { |
| ol_txrx_vdev_handle vdev; |
| ol_txrx_peer_handle peer, temp; |
| |
| if (!wma || vdev_id > wma->max_bssid) |
| return; |
| |
| vdev = wma->interfaces[vdev_id].handle; |
| if (!vdev) |
| return; |
| |
| WMA_LOGE("%s: vdev_id - %d", __func__, vdev_id); |
| /* remove all remote peers of SAP */ |
| adf_os_spin_lock_bh(&vdev->pdev->peer_ref_mutex); |
| |
| temp = NULL; |
| TAILQ_FOREACH_REVERSE(peer, &vdev->peer_list, peer_list_t, peer_list_elem) { |
| if (temp) { |
| adf_os_spin_unlock_bh(&vdev->pdev->peer_ref_mutex); |
| if (adf_os_atomic_read(&temp->delete_in_progress) == 0){ |
| wma_remove_peer(wma, temp->mac_addr.raw, |
| vdev_id, temp, VOS_FALSE); |
| } |
| adf_os_spin_lock_bh(&vdev->pdev->peer_ref_mutex); |
| } |
| /* self peer is deleted by caller */ |
| if (peer == TAILQ_FIRST(&vdev->peer_list)){ |
| WMA_LOGE("%s: self peer removed by caller ", __func__); |
| break; |
| } else |
| temp = peer; |
| } |
| |
| adf_os_spin_unlock_bh(&vdev->pdev->peer_ref_mutex); |
| } |
| |
| static int wma_vdev_stop_resp_handler(void *handle, u_int8_t *cmd_param_info, |
| u32 len) |
| { |
| WMI_VDEV_STOPPED_EVENTID_param_tlvs *param_buf; |
| wmi_vdev_stopped_event_fixed_param *event; |
| u_int8_t *buf; |
| vos_msg_t vos_msg = {0}; |
| |
| WMA_LOGI("%s: Enter", __func__); |
| param_buf = (WMI_VDEV_STOPPED_EVENTID_param_tlvs *) cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGE("Invalid event buffer"); |
| return -EINVAL; |
| } |
| event = param_buf->fixed_param; |
| buf = vos_mem_malloc(sizeof(wmi_vdev_stopped_event_fixed_param)); |
| if (!buf) { |
| WMA_LOGE("%s: Failed alloc memory for buf", __func__); |
| return -EINVAL; |
| } |
| vos_mem_zero(buf, sizeof(wmi_vdev_stopped_event_fixed_param)); |
| vos_mem_copy(buf, (u_int8_t *)event, |
| sizeof(wmi_vdev_stopped_event_fixed_param)); |
| |
| vos_msg.type = WDA_VDEV_STOP_IND; |
| vos_msg.bodyptr = buf; |
| vos_msg.bodyval = 0; |
| |
| if (VOS_STATUS_SUCCESS != |
| vos_mq_post_message(VOS_MQ_ID_WDA, &vos_msg)) { |
| WMA_LOGP("%s: Failed to post WDA_VDEV_STOP_IND msg", __func__); |
| vos_mem_free(buf); |
| return -1; |
| } |
| WMA_LOGD("WDA_VDEV_STOP_IND posted"); |
| return 0; |
| } |
| |
| void wma_hidden_ssid_vdev_restart_on_vdev_stop(tp_wma_handle wma_handle, u_int8_t sessionId) |
| { |
| wmi_vdev_start_request_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| wmi_channel *chan; |
| int32_t len; |
| u_int8_t *buf_ptr; |
| struct wma_txrx_node *intr = wma_handle->interfaces; |
| int32_t ret=0; |
| WLAN_PHY_MODE chanmode; |
| tpAniSirGlobal mac_ctx = (tpAniSirGlobal)vos_get_context( |
| VOS_MODULE_ID_PE, wma_handle->vos_context); |
| |
| if (!mac_ctx) { |
| WMA_LOGE("%s: Failed to get mac_ctx", __func__); |
| return; |
| } |
| len = sizeof(*cmd) + sizeof(wmi_channel) + |
| WMI_TLV_HDR_SIZE; |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| adf_os_atomic_set(&intr[sessionId].vdev_restart_params.hidden_ssid_restart_in_progress,0); |
| return; |
| } |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_vdev_start_request_cmd_fixed_param *) buf_ptr; |
| chan = (wmi_channel *) (buf_ptr + sizeof(*cmd)); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_start_request_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vdev_start_request_cmd_fixed_param)); |
| |
| WMITLV_SET_HDR(&chan->tlv_header, |
| WMITLV_TAG_STRUC_wmi_channel, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_channel)); |
| |
| cmd->vdev_id = sessionId; |
| cmd->ssid.ssid_len = intr[sessionId].vdev_restart_params.ssid.ssid_len; |
| vos_mem_copy(cmd->ssid.ssid, |
| intr[sessionId].vdev_restart_params.ssid.ssid, |
| cmd->ssid.ssid_len); |
| cmd->flags = intr[sessionId].vdev_restart_params.flags; |
| if (intr[sessionId].vdev_restart_params.ssidHidden) |
| cmd->flags |= WMI_UNIFIED_VDEV_START_HIDDEN_SSID; |
| else |
| cmd->flags &= (0xFFFFFFFE); |
| cmd->requestor_id = intr[sessionId].vdev_restart_params.requestor_id; |
| cmd->disable_hw_ack = intr[sessionId].vdev_restart_params.disable_hw_ack; |
| |
| chan->mhz = intr[sessionId].vdev_restart_params.chan.mhz; |
| chan->band_center_freq1 = intr[sessionId].vdev_restart_params.chan.band_center_freq1; |
| chan->band_center_freq2 = intr[sessionId].vdev_restart_params.chan.band_center_freq2; |
| chan->info = intr[sessionId].vdev_restart_params.chan.info; |
| chan->reg_info_1 = intr[sessionId].vdev_restart_params.chan.reg_info_1; |
| chan->reg_info_2 = intr[sessionId].vdev_restart_params.chan.reg_info_2; |
| if (chan->band_center_freq1 == 0) { |
| chan->band_center_freq1 = chan->mhz; |
| chanmode = intr[sessionId].chanmode; |
| if (chanmode == MODE_11AC_VHT80) |
| chan->band_center_freq1 = vos_chan_to_freq( |
| wma_getCenterChannel( |
| chan->mhz, |
| mac_ctx->roam.configParam.channelBondingMode5GHz)); |
| |
| if ((chanmode == MODE_11NA_HT40) || |
| (chanmode == MODE_11AC_VHT40)) { |
| if (mac_ctx->roam.configParam.channelBondingMode5GHz == |
| PHY_DOUBLE_CHANNEL_LOW_PRIMARY) |
| chan->band_center_freq1 += 10; |
| else |
| chan->band_center_freq1 -= 10; |
| } |
| |
| if ((chanmode == MODE_11NG_HT40) || |
| (chanmode == MODE_11AC_VHT40_2G)) { |
| if (mac_ctx->roam.configParam.channelBondingMode24GHz == |
| PHY_DOUBLE_CHANNEL_LOW_PRIMARY) |
| chan->band_center_freq1 += 10; |
| else |
| chan->band_center_freq1 -= 10; |
| } |
| } |
| |
| cmd->num_noa_descriptors = 0; |
| buf_ptr = (u_int8_t *)(((u_int8_t *) cmd) + sizeof(*cmd) + |
| sizeof(wmi_channel)); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| cmd->num_noa_descriptors * |
| sizeof(wmi_p2p_noa_descriptor)); |
| |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle,buf,len, |
| WMI_VDEV_RESTART_REQUEST_CMDID); |
| if (ret < 0) { |
| WMA_LOGE("%s: Failed to send vdev restart command", __func__); |
| adf_os_atomic_set(&intr[sessionId].vdev_restart_params.hidden_ssid_restart_in_progress,0); |
| wmi_buf_free(buf); |
| } |
| } |
| |
| static int wma_vdev_stop_ind(tp_wma_handle wma, u_int8_t *buf) |
| { |
| wmi_vdev_stopped_event_fixed_param *resp_event; |
| struct wma_target_req *req_msg; |
| ol_txrx_peer_handle peer; |
| ol_txrx_pdev_handle pdev; |
| u_int8_t peer_id; |
| struct wma_txrx_node *iface; |
| int32_t status = 0; |
| #ifdef FEATURE_AP_MCC_CH_AVOIDANCE |
| tpAniSirGlobal mac_ctx = (tpAniSirGlobal)vos_get_context( |
| VOS_MODULE_ID_PE, |
| wma->vos_context); |
| if (NULL == mac_ctx) { |
| WMA_LOGE("%s: Failed to get mac_ctx", __func__); |
| return -EINVAL; |
| } |
| #endif /* FEATURE_AP_MCC_CH_AVOIDANCE */ |
| |
| WMA_LOGI("%s: Enter", __func__); |
| if (!buf) { |
| WMA_LOGE("Invalid event buffer"); |
| return -EINVAL; |
| } |
| |
| resp_event = (wmi_vdev_stopped_event_fixed_param *)buf; |
| |
| if ((resp_event->vdev_id <= wma->max_bssid) && |
| (adf_os_atomic_read(&wma->interfaces[resp_event->vdev_id].vdev_restart_params.hidden_ssid_restart_in_progress)) && |
| ((wma->interfaces[resp_event->vdev_id].type == WMI_VDEV_TYPE_AP) && |
| (wma->interfaces[resp_event->vdev_id].sub_type == 0))) { |
| WMA_LOGE("%s: vdev stop event recevied for hidden ssid set using IOCTL ", __func__); |
| |
| req_msg = wma_fill_vdev_req(wma, resp_event->vdev_id, |
| WDA_HIDDEN_SSID_VDEV_RESTART, |
| WMA_TARGET_REQ_TYPE_VDEV_START, resp_event, |
| WMA_VDEV_START_REQUEST_TIMEOUT); |
| if (!req_msg) { |
| WMA_LOGE("%s: Failed to fill vdev request, vdev_id %d", |
| __func__, resp_event->vdev_id); |
| return -EINVAL; |
| } |
| |
| wma_hidden_ssid_vdev_restart_on_vdev_stop(wma, resp_event->vdev_id); |
| } |
| |
| req_msg = wma_find_vdev_req(wma, resp_event->vdev_id, |
| WMA_TARGET_REQ_TYPE_VDEV_STOP); |
| if (!req_msg) { |
| WMA_LOGP("%s: Failed to lookup vdev request for vdev id %d", |
| __func__, resp_event->vdev_id); |
| return -EINVAL; |
| } |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| if (!pdev) { |
| WMA_LOGE("%s: pdev is NULL", __func__); |
| status = -EINVAL; |
| vos_timer_stop(&req_msg->event_timeout); |
| goto free_req_msg; |
| } |
| |
| vos_timer_stop(&req_msg->event_timeout); |
| if (req_msg->msg_type == WDA_DELETE_BSS_REQ) { |
| tpDeleteBssParams params = |
| (tpDeleteBssParams)req_msg->user_data; |
| struct beacon_info *bcn; |
| if (resp_event->vdev_id > wma->max_bssid) { |
| WMA_LOGE("%s: Invalid vdev_id %d", __func__, |
| resp_event->vdev_id); |
| vos_mem_free(params); |
| status = -EINVAL; |
| goto free_req_msg; |
| } |
| |
| iface = &wma->interfaces[resp_event->vdev_id]; |
| if (iface->handle == NULL) { |
| WMA_LOGE("%s vdev id %d is already deleted", |
| __func__, resp_event->vdev_id); |
| vos_mem_free(params); |
| status = -EINVAL; |
| goto free_req_msg; |
| } |
| |
| /* Clear arp and ns offload cache */ |
| vos_mem_zero(&iface->ns_offload_req, |
| sizeof(iface->ns_offload_req)); |
| vos_mem_zero(&iface->arp_offload_req, |
| sizeof(iface->arp_offload_req)); |
| |
| #ifdef QCA_IBSS_SUPPORT |
| if ( wma_is_vdev_in_ibss_mode(wma, resp_event->vdev_id)) |
| wma_delete_all_ibss_peers(wma, resp_event->vdev_id); |
| else |
| #endif |
| if (WMA_IS_VDEV_IN_NDI_MODE(wma->interfaces, |
| resp_event->vdev_id)) { |
| wma_delete_all_nan_remote_peers(wma, |
| resp_event->vdev_id); |
| } else { |
| if (wma_is_vdev_in_ap_mode(wma, resp_event->vdev_id)) |
| { |
| wma_delete_all_ap_remote_peers(wma, resp_event->vdev_id); |
| } |
| peer = ol_txrx_find_peer_by_addr(pdev, params->bssid, |
| &peer_id); |
| if (!peer) |
| WMA_LOGD("%s Failed to find peer %pM", |
| __func__, params->bssid); |
| wma_remove_peer(wma, params->bssid, resp_event->vdev_id, |
| peer, VOS_FALSE); |
| } |
| |
| if (wmi_unified_vdev_down_send(wma->wmi_handle, resp_event->vdev_id) < 0) { |
| WMA_LOGE("Failed to send vdev down cmd: vdev %d", |
| resp_event->vdev_id); |
| } else { |
| wma->interfaces[resp_event->vdev_id].vdev_up = FALSE; |
| #ifdef FEATURE_AP_MCC_CH_AVOIDANCE |
| if (mac_ctx->sap.sap_channel_avoidance) |
| wma_find_mcc_ap(wma, |
| resp_event->vdev_id, |
| false); |
| #endif /* FEATURE_AP_MCC_CH_AVOIDANCE */ |
| } |
| ol_txrx_vdev_flush(iface->handle); |
| WMA_LOGD("%s, vdev_id: %d, un-pausing tx_ll_queue for VDEV_STOP rsp", |
| __func__, resp_event->vdev_id); |
| wdi_in_vdev_unpause(iface->handle, |
| OL_TXQ_PAUSE_REASON_VDEV_STOP); |
| iface->pause_bitmap &= ~(1 << PAUSE_TYPE_HOST); |
| adf_os_atomic_set(&iface->bss_status, WMA_BSS_STATUS_STOPPED); |
| WMA_LOGD("%s: (type %d subtype %d) BSS is stopped", |
| __func__, iface->type, iface->sub_type); |
| bcn = wma->interfaces[resp_event->vdev_id].beacon; |
| |
| if (bcn) { |
| WMA_LOGD("%s: Freeing beacon struct %pK, " |
| "template memory %pK", __func__, |
| bcn, bcn->buf); |
| if (bcn->dma_mapped) |
| adf_nbuf_unmap_single(pdev->osdev, bcn->buf, |
| ADF_OS_DMA_TO_DEVICE); |
| adf_nbuf_free(bcn->buf); |
| vos_mem_free(bcn); |
| wma->interfaces[resp_event->vdev_id].beacon = NULL; |
| } |
| |
| /* Timeout status means its WMA generated DEL BSS REQ when ADD |
| BSS REQ was timed out to stop the VDEV in this case no need to |
| send response to UMAC */ |
| if (params->status == eHAL_STATUS_FW_MSG_TIMEDOUT){ |
| vos_mem_free(params); |
| WMA_LOGE("%s: DEL BSS from ADD BSS timeout do not send " |
| "resp to UMAC (vdev id %x)", |
| __func__, resp_event->vdev_id); |
| } else { |
| params->status = VOS_STATUS_SUCCESS; |
| wma_send_msg(wma, WDA_DELETE_BSS_RSP, (void *)params, 0); |
| } |
| |
| if (iface->del_staself_req) { |
| WMA_LOGA("scheduling defered deletion (vdev id %x)", |
| resp_event->vdev_id); |
| wma_vdev_detach(wma, iface->del_staself_req, 1); |
| } |
| } |
| free_req_msg: |
| vos_timer_destroy(&req_msg->event_timeout); |
| adf_os_mem_free(req_msg); |
| return status; |
| } |
| |
| #ifdef WLAN_FEATURE_EXTWOW_SUPPORT |
| static void wma_send_status_of_ext_wow(tp_wma_handle wma, boolean status) |
| { |
| tSirReadyToExtWoWInd *ready_to_extwow; |
| VOS_STATUS vstatus; |
| vos_msg_t vos_msg; |
| u_int8_t len; |
| |
| WMA_LOGD("Posting ready to suspend indication to umac"); |
| |
| len = sizeof(tSirReadyToExtWoWInd); |
| ready_to_extwow = (tSirReadyToExtWoWInd *) vos_mem_malloc(len); |
| |
| if (NULL == ready_to_extwow) { |
| WMA_LOGE("%s: Memory allocation failure", __func__); |
| return; |
| } |
| |
| ready_to_extwow->mesgType = eWNI_SME_READY_TO_EXTWOW_IND; |
| ready_to_extwow->mesgLen = len; |
| ready_to_extwow->status= status; |
| |
| vos_msg.type = eWNI_SME_READY_TO_EXTWOW_IND; |
| vos_msg.bodyptr = (void *) ready_to_extwow; |
| vos_msg.bodyval = 0; |
| |
| vstatus = vos_mq_post_message(VOS_MQ_ID_SME, &vos_msg); |
| if (vstatus != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to post ready to suspend"); |
| vos_mem_free(ready_to_extwow); |
| } |
| } |
| |
| static int wma_enable_ext_wow(tp_wma_handle wma, |
| tpSirExtWoWParams params) |
| { |
| wmi_extwow_enable_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len; |
| int ret; |
| |
| len = sizeof(wmi_extwow_enable_cmd_fixed_param); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (wmi_extwow_enable_cmd_fixed_param *) wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_extwow_enable_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_extwow_enable_cmd_fixed_param)); |
| |
| cmd->vdev_id = params->vdev_id; |
| cmd->type = params->type; |
| cmd->wakeup_pin_num = params->wakeup_pin_num; |
| |
| WMA_LOGD("%s: vdev_id %d type %d Wakeup_pin_num %x", |
| __func__, cmd->vdev_id, |
| cmd->type, cmd->wakeup_pin_num); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_EXTWOW_ENABLE_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to set EXTWOW Enable", __func__); |
| wmi_buf_free(buf); |
| wma_send_status_of_ext_wow(wma, FALSE); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| wma_send_status_of_ext_wow(wma, TRUE); |
| return VOS_STATUS_SUCCESS; |
| |
| } |
| |
| static int wma_set_app_type1_params_in_fw(tp_wma_handle wma, |
| tpSirAppType1Params appType1Params) |
| { |
| wmi_extwow_set_app_type1_params_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len; |
| int ret; |
| |
| len = sizeof(wmi_extwow_set_app_type1_params_cmd_fixed_param); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (wmi_extwow_set_app_type1_params_cmd_fixed_param *) |
| wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_extwow_set_app_type1_params_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_extwow_set_app_type1_params_cmd_fixed_param)); |
| |
| cmd->vdev_id = appType1Params->vdev_id; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(appType1Params->wakee_mac_addr, |
| &cmd->wakee_mac); |
| vos_mem_copy(cmd->ident, appType1Params->identification_id, 8); |
| cmd->ident_len = appType1Params->id_length; |
| vos_mem_copy(cmd->passwd, appType1Params->password, 16); |
| cmd->passwd_len = appType1Params->pass_length; |
| |
| WMA_LOGD("%s: vdev_id %d wakee_mac_addr %pM " |
| "identification_id %.8s id_length %u " |
| "password %.16s pass_length %u", |
| __func__, cmd->vdev_id, appType1Params->wakee_mac_addr, |
| cmd->ident, cmd->ident_len, |
| cmd->passwd, cmd->passwd_len); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_EXTWOW_SET_APP_TYPE1_PARAMS_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to set APP TYPE1 PARAMS", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static int wma_set_app_type2_params_in_fw(tp_wma_handle wma, |
| tpSirAppType2Params appType2Params) |
| { |
| wmi_extwow_set_app_type2_params_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len; |
| int ret; |
| |
| len = sizeof(wmi_extwow_set_app_type2_params_cmd_fixed_param); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (wmi_extwow_set_app_type2_params_cmd_fixed_param *) |
| wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_extwow_set_app_type2_params_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_extwow_set_app_type2_params_cmd_fixed_param)); |
| |
| cmd->vdev_id = appType2Params->vdev_id; |
| |
| vos_mem_copy(cmd->rc4_key, appType2Params->rc4_key, 16); |
| cmd->rc4_key_len = appType2Params->rc4_key_len; |
| |
| cmd->ip_id = appType2Params->ip_id; |
| cmd->ip_device_ip = appType2Params->ip_device_ip; |
| cmd->ip_server_ip = appType2Params->ip_server_ip; |
| |
| cmd->tcp_src_port = appType2Params->tcp_src_port; |
| cmd->tcp_dst_port = appType2Params->tcp_dst_port; |
| cmd->tcp_seq = appType2Params->tcp_seq; |
| cmd->tcp_ack_seq = appType2Params->tcp_ack_seq; |
| |
| cmd->keepalive_init = appType2Params->keepalive_init; |
| cmd->keepalive_min = appType2Params->keepalive_min; |
| cmd->keepalive_max = appType2Params->keepalive_max; |
| cmd->keepalive_inc = appType2Params->keepalive_inc; |
| |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(appType2Params->gateway_mac, |
| &cmd->gateway_mac); |
| cmd->tcp_tx_timeout_val = appType2Params->tcp_tx_timeout_val; |
| cmd->tcp_rx_timeout_val = appType2Params->tcp_rx_timeout_val; |
| |
| WMA_LOGD("%s: vdev_id %d gateway_mac %pM " |
| "rc4_key %.16s rc4_key_len %u " |
| "ip_id %x ip_device_ip %x ip_server_ip %x " |
| "tcp_src_port %u tcp_dst_port %u tcp_seq %u " |
| "tcp_ack_seq %u keepalive_init %u keepalive_min %u " |
| "keepalive_max %u keepalive_inc %u " |
| "tcp_tx_timeout_val %u tcp_rx_timeout_val %u", |
| __func__, cmd->vdev_id, appType2Params->gateway_mac, |
| cmd->rc4_key, cmd->rc4_key_len, |
| cmd->ip_id, cmd->ip_device_ip, cmd->ip_server_ip, |
| cmd->tcp_src_port, cmd->tcp_dst_port, cmd->tcp_seq, |
| cmd->tcp_ack_seq, cmd->keepalive_init, cmd->keepalive_min, |
| cmd->keepalive_max, cmd->keepalive_inc, |
| cmd->tcp_tx_timeout_val, cmd->tcp_rx_timeout_val); |
| |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_EXTWOW_SET_APP_TYPE2_PARAMS_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to set APP TYPE2 PARAMS", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| |
| } |
| #endif |
| static void wma_update_pdev_stats(tp_wma_handle wma, |
| wmi_pdev_stats *pdev_stats) |
| { |
| tAniGetPEStatsRsp *stats_rsp_params; |
| tANI_U32 temp_mask; |
| tANI_U8 *stats_buf; |
| tCsrGlobalClassAStatsInfo *classa_stats = NULL; |
| struct wma_txrx_node *node; |
| u_int8_t i; |
| |
| for (i = 0; i < wma->max_bssid; i++) { |
| node = &wma->interfaces[i]; |
| stats_rsp_params = node->stats_rsp; |
| if (stats_rsp_params) { |
| node->fw_stats_set |= FW_PDEV_STATS_SET; |
| WMA_LOGD("<---FW PDEV STATS received for vdevId:%d", |
| i); |
| stats_buf = (tANI_U8 *) (stats_rsp_params + 1); |
| temp_mask = stats_rsp_params->statsMask; |
| if (temp_mask & (1 << eCsrSummaryStats)) |
| stats_buf += sizeof(tCsrSummaryStatsInfo); |
| |
| if (temp_mask & (1 << eCsrGlobalClassAStats)) { |
| classa_stats = |
| (tCsrGlobalClassAStatsInfo *) stats_buf; |
| classa_stats->max_pwr = pdev_stats->chan_tx_pwr; |
| } |
| } |
| } |
| } |
| |
| /** |
| * wma_vdev_stats_lost_link_helper() - helper function to extract |
| * lost link information from vdev statistics event while deleting BSS. |
| * @wma: WMA handle |
| * @vdev_stats: statistics information from firmware |
| * |
| * This is for informing HDD to collect lost link information while |
| * disconnection. Following conditions to check |
| * 1. vdev is up |
| * 2. bssid is zero. When handling DELETE_BSS request message, it sets bssid to |
| * zero, hence add the check here to indicate the event comes during deleting |
| * BSS |
| * 3. DELETE_BSS is the request message queued. Put this condition check on the |
| * last one as it consumes more resource searching entries in the list |
| * |
| * Return: none |
| */ |
| static void wma_vdev_stats_lost_link_helper(tp_wma_handle wma, |
| wmi_vdev_stats *vdev_stats) |
| { |
| struct wma_txrx_node *node; |
| int8_t rssi; |
| struct wma_target_req *req_msg; |
| uint8_t zero_mac[ETH_ALEN] = {0}; |
| int8_t bcn_snr, dat_snr; |
| |
| node = &wma->interfaces[vdev_stats->vdev_id]; |
| if (node->vdev_up && |
| vos_mem_compare(node->bssid, zero_mac, ETH_ALEN)) { |
| req_msg = wma_peek_vdev_req(wma, vdev_stats->vdev_id, |
| WMA_TARGET_REQ_TYPE_VDEV_STOP); |
| if ((NULL == req_msg) || |
| (WDA_DELETE_BSS_REQ != req_msg->msg_type)) { |
| WMA_LOGD("%s: cannot find DELETE_BSS request message", |
| __func__); |
| return; |
| } |
| bcn_snr = vdev_stats->vdev_snr.bcn_snr; |
| dat_snr = vdev_stats->vdev_snr.dat_snr; |
| WMA_LOGD("%s: get vdev id %d, beancon snr %d, data snr %d", |
| __func__, vdev_stats->vdev_id, bcn_snr, dat_snr); |
| if ((bcn_snr != WMA_TGT_INVALID_SNR_OLD) && |
| (bcn_snr != WMA_TGT_INVALID_SNR_NEW)) |
| rssi = bcn_snr; |
| else if ((dat_snr != WMA_TGT_INVALID_SNR_OLD) && |
| (dat_snr != WMA_TGT_INVALID_SNR_NEW)) |
| rssi = dat_snr; |
| else |
| rssi = WMA_TGT_INVALID_SNR_OLD; |
| |
| /* Get the absolute rssi value from the current rssi value */ |
| rssi = rssi + WMA_TGT_NOISE_FLOOR_DBM; |
| wma_lost_link_info_handler(wma, vdev_stats->vdev_id, rssi); |
| } |
| } |
| |
| static void wma_update_vdev_stats(tp_wma_handle wma, |
| wmi_vdev_stats *vdev_stats) |
| { |
| tAniGetPEStatsRsp *stats_rsp_params; |
| tCsrSummaryStatsInfo *summary_stats = NULL; |
| tANI_U8 *stats_buf; |
| struct wma_txrx_node *node; |
| tANI_U8 i; |
| v_S7_t rssi = 0; |
| VOS_STATUS vos_status; |
| tAniGetRssiReq *pGetRssiReq = (tAniGetRssiReq*)wma->pGetRssiReq; |
| vos_msg_t sme_msg = {0}; |
| int8_t bcn_snr, dat_snr; |
| |
| node = &wma->interfaces[vdev_stats->vdev_id]; |
| stats_rsp_params = node->stats_rsp; |
| if (stats_rsp_params) { |
| stats_buf = (tANI_U8 *) (stats_rsp_params + 1); |
| node->fw_stats_set |= FW_VDEV_STATS_SET; |
| WMA_LOGD("<---FW VDEV STATS received for vdevId:%d", |
| vdev_stats->vdev_id); |
| if (stats_rsp_params->statsMask & |
| (1 << eCsrSummaryStats)) { |
| summary_stats = (tCsrSummaryStatsInfo *) stats_buf; |
| for (i=0 ; i < 4 ; i++) { |
| summary_stats->tx_frm_cnt[i] = |
| vdev_stats->tx_frm_cnt[i]; |
| summary_stats->fail_cnt[i] = |
| vdev_stats->fail_cnt[i]; |
| summary_stats->multiple_retry_cnt[i] = |
| vdev_stats->multiple_retry_cnt[i]; |
| } |
| |
| summary_stats->rx_frm_cnt = vdev_stats->rx_frm_cnt; |
| summary_stats->rx_error_cnt = vdev_stats->rx_err_cnt; |
| summary_stats->rx_discard_cnt = |
| vdev_stats->rx_discard_cnt; |
| summary_stats->ack_fail_cnt = vdev_stats->ack_fail_cnt; |
| summary_stats->rts_succ_cnt = vdev_stats->rts_succ_cnt; |
| summary_stats->rts_fail_cnt = vdev_stats->rts_fail_cnt; |
| } |
| } |
| |
| bcn_snr = vdev_stats->vdev_snr.bcn_snr; |
| dat_snr = vdev_stats->vdev_snr.dat_snr; |
| WMA_LOGD("vdev id %d beancon snr %d data snr %d", |
| vdev_stats->vdev_id, bcn_snr, dat_snr); |
| |
| if (pGetRssiReq && |
| pGetRssiReq->sessionId == vdev_stats->vdev_id) { |
| if ((bcn_snr == WMA_TGT_INVALID_SNR_OLD || |
| bcn_snr == WMA_TGT_INVALID_SNR_NEW) && |
| (dat_snr == WMA_TGT_INVALID_SNR_OLD || |
| dat_snr == WMA_TGT_INVALID_SNR_NEW)) { |
| /* |
| * Firmware sends invalid snr till it sees |
| * Beacon/Data after connection since after |
| * vdev up fw resets the snr to invalid. |
| * In this duartion Host will return the last know |
| * rssi during connection. |
| */ |
| rssi = wma->first_rssi; |
| } else { |
| if (bcn_snr != WMA_TGT_INVALID_SNR_OLD && |
| bcn_snr != WMA_TGT_INVALID_SNR_NEW) { |
| rssi = bcn_snr; |
| } else if (dat_snr != WMA_TGT_INVALID_SNR_OLD && |
| dat_snr != WMA_TGT_INVALID_SNR_NEW) { |
| rssi = dat_snr; |
| } |
| |
| /* |
| * Get the absolute rssi value from the current rssi value |
| * the sinr value is hardcoded into 0 in the core stack |
| */ |
| rssi = rssi + WMA_TGT_NOISE_FLOOR_DBM; |
| } |
| |
| WMA_LOGD("Average Rssi = %d, vdev id= %d", rssi, |
| pGetRssiReq->sessionId); |
| |
| /* update the average rssi value to UMAC layer */ |
| if (NULL != pGetRssiReq->rssiCallback) { |
| ((tCsrRssiCallback)(pGetRssiReq->rssiCallback))(rssi,pGetRssiReq->staId, |
| pGetRssiReq->pDevContext); |
| } |
| |
| adf_os_mem_free(pGetRssiReq); |
| wma->pGetRssiReq = NULL; |
| } |
| |
| if (node->psnr_req) { |
| tAniGetSnrReq *p_snr_req = node->psnr_req; |
| |
| if ((bcn_snr != WMA_TGT_INVALID_SNR_OLD) && |
| (bcn_snr != WMA_TGT_INVALID_SNR_NEW)) |
| p_snr_req->snr = bcn_snr; |
| else if ((dat_snr != WMA_TGT_INVALID_SNR_OLD) && |
| (dat_snr != WMA_TGT_INVALID_SNR_NEW)) |
| p_snr_req->snr = dat_snr; |
| else |
| p_snr_req->snr = WMA_TGT_INVALID_SNR_OLD; |
| |
| sme_msg.type = eWNI_SME_SNR_IND; |
| sme_msg.bodyptr = p_snr_req; |
| sme_msg.bodyval = 0; |
| |
| vos_status = vos_mq_post_message(VOS_MODULE_ID_SME, &sme_msg); |
| if (!VOS_IS_STATUS_SUCCESS(vos_status)) { |
| WMA_LOGE("%s: Fail to post snr ind msg", __func__); |
| vos_mem_free(p_snr_req); |
| } |
| |
| node->psnr_req = NULL; |
| } |
| |
| wma_vdev_stats_lost_link_helper(wma, vdev_stats); |
| } |
| |
| static void wma_post_stats(tp_wma_handle wma, struct wma_txrx_node *node) |
| { |
| tAniGetPEStatsRsp *stats_rsp_params; |
| |
| stats_rsp_params = node->stats_rsp; |
| /* send response to UMAC*/ |
| wma_send_msg(wma, WDA_GET_STATISTICS_RSP, (void *)stats_rsp_params, 0) ; |
| node->stats_rsp = NULL; |
| node->fw_stats_set = 0; |
| } |
| |
| static void wma_update_peer_stats(tp_wma_handle wma, wmi_peer_stats *peer_stats) |
| { |
| tAniGetPEStatsRsp *stats_rsp_params; |
| tCsrGlobalClassAStatsInfo *classa_stats = NULL; |
| struct wma_txrx_node *node; |
| tANI_U8 *stats_buf, vdev_id, macaddr[IEEE80211_ADDR_LEN], mcsRateFlags; |
| tANI_U32 temp_mask; |
| |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&peer_stats->peer_macaddr, &macaddr[0]); |
| if (!wma_find_vdev_by_bssid(wma, macaddr, &vdev_id)) |
| return; |
| |
| node = &wma->interfaces[vdev_id]; |
| if (node->stats_rsp) { |
| node->fw_stats_set |= FW_PEER_STATS_SET; |
| WMA_LOGD("<-- FW PEER STATS received for vdevId:%d", vdev_id); |
| stats_rsp_params = (tAniGetPEStatsRsp *) node->stats_rsp; |
| stats_buf = (tANI_U8 *) (stats_rsp_params + 1); |
| temp_mask = stats_rsp_params->statsMask; |
| if (temp_mask & (1 << eCsrSummaryStats)) |
| stats_buf += sizeof(tCsrSummaryStatsInfo); |
| |
| if (temp_mask & (1 << eCsrGlobalClassAStats)) { |
| classa_stats = (tCsrGlobalClassAStatsInfo *) stats_buf; |
| WMA_LOGD("peer tx rate:%d", peer_stats->peer_tx_rate); |
| /*The linkspeed returned by fw is in kbps so convert |
| *it in to units of 500kbps which is expected by UMAC*/ |
| if (peer_stats->peer_tx_rate) { |
| classa_stats->tx_rate = |
| peer_stats->peer_tx_rate/500; |
| } |
| |
| classa_stats->tx_rate_flags = node->rate_flags; |
| if (!(node->rate_flags & eHAL_TX_RATE_LEGACY)) { |
| classa_stats->mcs_index = |
| wma_get_mcs_idx((peer_stats->peer_tx_rate/100), |
| node->rate_flags, |
| node->nss, |
| &mcsRateFlags); |
| /* rx_frag_cnt and promiscuous_rx_frag_cnt |
| * parameter is currently not used. lets use the |
| * same parameter to hold the nss value and mcs |
| * rate flags */ |
| classa_stats->rx_frag_cnt = node->nss; |
| classa_stats->promiscuous_rx_frag_cnt = mcsRateFlags; |
| } |
| /* FW returns tx power in intervals of 0.5 dBm |
| Convert it back to intervals of 1 dBm */ |
| classa_stats->max_pwr = |
| roundup(classa_stats->max_pwr, 2) >> 1; |
| } |
| } |
| } |
| |
| static void wma_post_link_status(tAniGetLinkStatus *pGetLinkStatus, |
| u_int8_t link_status) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| vos_msg_t sme_msg = {0} ; |
| |
| pGetLinkStatus->linkStatus = link_status; |
| sme_msg.type = eWNI_SME_LINK_STATUS_IND; |
| sme_msg.bodyptr = pGetLinkStatus; |
| sme_msg.bodyval = 0; |
| |
| vos_status = vos_mq_post_message(VOS_MODULE_ID_SME, &sme_msg); |
| if (!VOS_IS_STATUS_SUCCESS(vos_status)) { |
| WMA_LOGE("%s: Fail to post link status ind msg", __func__); |
| vos_mem_free(pGetLinkStatus); |
| } |
| } |
| |
| /** |
| * wma_update_per_chain_rssi_stats() - to store per chain rssi stats for |
| * all vdevs for which the stats were requested into csr stats structure. |
| * @wma: wma handle |
| * @rssi_stats: rssi stats |
| * @rssi_per_chain_stats: buffer where rssi stats to be stored |
| * |
| * This function stores per chain rssi stats received from fw for all vdevs for |
| * which the stats were requested into a csr stats structure. |
| * |
| * Return: void |
| */ |
| static void wma_update_per_chain_rssi_stats(tp_wma_handle wma, |
| wmi_rssi_stats *rssi_stats, |
| struct csr_per_chain_rssi_stats_info *rssi_per_chain_stats) |
| { |
| int i; |
| int8_t bcn_snr, dat_snr; |
| |
| for (i = 0; i < NUM_CHAINS_MAX; i++) { |
| bcn_snr = rssi_stats->rssi_avg_beacon[i]; |
| dat_snr = rssi_stats->rssi_avg_data[i]; |
| WMA_LOGD("chain %d beacon snr %d data snr %d", |
| i, bcn_snr, dat_snr); |
| if ((dat_snr != WMA_TGT_INVALID_SNR_OLD && |
| dat_snr != WMA_TGT_INVALID_SNR_NEW)) |
| rssi_per_chain_stats->rssi[i] = dat_snr; |
| else if ((bcn_snr != WMA_TGT_INVALID_SNR_OLD && |
| bcn_snr != WMA_TGT_INVALID_SNR_NEW)) |
| rssi_per_chain_stats->rssi[i] = bcn_snr; |
| else |
| /* |
| * Firmware sends invalid snr till it sees |
| * Beacon/Data after connection since after |
| * vdev up fw resets the snr to invalid. |
| * In this duartion Host will return an invalid rssi |
| * value. |
| */ |
| rssi_per_chain_stats->rssi[i] = WMA_TGT_RSSI_INVALID; |
| |
| /* |
| * Get the absolute rssi value from the current rssi value the |
| * sinr value is hardcoded into 0 in the CORE stack |
| */ |
| rssi_per_chain_stats->rssi[i] += WMA_TGT_NOISE_FLOOR_DBM; |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&(rssi_stats->peer_macaddr), |
| rssi_per_chain_stats->peer_mac_addr); |
| } |
| } |
| |
| /** |
| * wma_update_rssi_stats() - to update rssi stats for all vdevs |
| * for which the stats were requested. |
| * @wma: wma handle |
| * @rssi_stats: rssi stats |
| * |
| * This function updates the rssi stats for all vdevs for which |
| * the stats were requested. |
| * |
| * Return: void |
| */ |
| static void wma_update_rssi_stats(tp_wma_handle wma, |
| wmi_rssi_stats *rssi_stats) |
| { |
| tAniGetPEStatsRsp *stats_rsp_params; |
| struct csr_per_chain_rssi_stats_info *rssi_per_chain_stats = NULL; |
| struct wma_txrx_node *node; |
| uint8_t *stats_buf; |
| uint32_t temp_mask; |
| uint8_t vdev_id; |
| |
| vdev_id = rssi_stats->vdev_id; |
| node = &wma->interfaces[vdev_id]; |
| if (node->stats_rsp) { |
| node->fw_stats_set |= FW_RSSI_PER_CHAIN_STATS_SET; |
| WMA_LOGD("<-- FW RSSI PER CHAIN STATS received for vdevId:%d", |
| vdev_id); |
| stats_rsp_params = (tAniGetPEStatsRsp *) node->stats_rsp; |
| stats_buf = (tANI_U8 *) (stats_rsp_params + 1); |
| temp_mask = stats_rsp_params->statsMask; |
| |
| if (temp_mask & (1 << eCsrSummaryStats)) |
| stats_buf += sizeof(tCsrSummaryStatsInfo); |
| if (temp_mask & (1 << eCsrGlobalClassAStats)) |
| stats_buf += sizeof(tCsrGlobalClassAStatsInfo); |
| if (temp_mask & (1 << eCsrGlobalClassBStats)) |
| stats_buf += sizeof(tCsrGlobalClassBStatsInfo); |
| if (temp_mask & (1 << eCsrGlobalClassCStats)) |
| stats_buf += sizeof(tCsrGlobalClassCStatsInfo); |
| if (temp_mask & (1 << eCsrGlobalClassDStats)) |
| stats_buf += sizeof(tCsrGlobalClassDStatsInfo); |
| if (temp_mask & (1 << eCsrPerStaStats)) |
| stats_buf += sizeof(tCsrPerStaStatsInfo); |
| |
| if (temp_mask & (1 << csr_per_chain_rssi_stats)) { |
| rssi_per_chain_stats = |
| (struct csr_per_chain_rssi_stats_info *)stats_buf; |
| wma_update_per_chain_rssi_stats(wma, rssi_stats, |
| rssi_per_chain_stats); |
| } |
| } |
| } |
| |
| |
| static int wma_link_status_rsp(tp_wma_handle wma, u_int8_t *buf) |
| { |
| wmi_vdev_rate_stats_event_fixed_param *event; |
| wmi_vdev_rate_ht_info *ht_info; |
| struct wma_txrx_node *intr = wma->interfaces; |
| u_int8_t link_status = LINK_STATUS_LEGACY; |
| int i; |
| |
| event = (wmi_vdev_rate_stats_event_fixed_param *)buf; |
| ht_info = (wmi_vdev_rate_ht_info *)(buf + sizeof(*event)); |
| |
| WMA_LOGD("num_vdev_stats: %d", event->num_vdev_stats); |
| for (i = 0; (i < event->num_vdev_stats) && ht_info; i++) { |
| WMA_LOGD( |
| "%s vdevId:%d tx_nss:%d rx_nss:%d tx_preamble:%d rx_preamble:%d", |
| __func__, |
| ht_info->vdevid, |
| ht_info->tx_nss, |
| ht_info->rx_nss, |
| ht_info->tx_preamble, |
| ht_info->rx_preamble); |
| if (ht_info->vdevid < wma->max_bssid && |
| intr[ht_info->vdevid].plink_status_req) { |
| if (ht_info->tx_nss || ht_info->rx_nss) |
| link_status = LINK_STATUS_MIMO; |
| |
| if ((ht_info->tx_preamble == LINK_RATE_VHT) || |
| (ht_info->rx_preamble == LINK_RATE_VHT)) |
| link_status |= LINK_STATUS_VHT; |
| |
| if (intr[ht_info->vdevid].nss == 2) |
| link_status |= LINK_SUPPORT_MIMO; |
| |
| if (intr[ht_info->vdevid].rate_flags & |
| (eHAL_TX_RATE_VHT20 | eHAL_TX_RATE_VHT40 | |
| eHAL_TX_RATE_VHT80)) |
| link_status |= LINK_SUPPORT_VHT; |
| |
| wma_post_link_status(intr[ht_info->vdevid].plink_status_req, |
| link_status); |
| intr[ht_info->vdevid].plink_status_req = NULL; |
| link_status = LINK_STATUS_LEGACY; |
| } |
| |
| ht_info++; |
| } |
| |
| return 0; |
| } |
| |
| static int wma_link_status_event_handler(void *handle, u_int8_t *cmd_param_info, |
| u_int32_t len) |
| { |
| WMI_UPDATE_VDEV_RATE_STATS_EVENTID_param_tlvs *param_buf; |
| wmi_vdev_rate_stats_event_fixed_param *event; |
| vos_msg_t vos_msg = {0}; |
| u_int32_t buf_size; |
| u_int8_t *buf; |
| |
| param_buf = |
| (WMI_UPDATE_VDEV_RATE_STATS_EVENTID_param_tlvs *)cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGA("%s: Invalid stats event", __func__); |
| return -EINVAL; |
| } |
| |
| event = param_buf->fixed_param; |
| if (event->num_vdev_stats > ((WMA_SVC_MSG_MAX_SIZE - |
| sizeof(*event)) / sizeof(wmi_vdev_rate_ht_info))) { |
| WMA_LOGE("%s: excess vdev_stats buffers:%d", __func__, |
| event->num_vdev_stats); |
| VOS_ASSERT(0); |
| return -EINVAL; |
| } |
| buf_size = sizeof(wmi_vdev_rate_stats_event_fixed_param) + |
| sizeof(wmi_vdev_rate_ht_info) * event->num_vdev_stats; |
| buf = vos_mem_malloc(buf_size); |
| if (!buf) { |
| WMA_LOGE("%s: Failed alloc memory for buf", __func__); |
| return -ENOMEM; |
| } |
| |
| vos_mem_zero(buf, buf_size); |
| vos_mem_copy(buf, param_buf->fixed_param, |
| sizeof(wmi_vdev_rate_stats_event_fixed_param)); |
| vos_mem_copy((buf + sizeof(wmi_vdev_rate_stats_event_fixed_param)), |
| param_buf->ht_info, |
| sizeof(wmi_vdev_rate_ht_info) * event->num_vdev_stats); |
| |
| vos_msg.type = WDA_GET_LINK_STATUS_RSP_IND; |
| vos_msg.bodyptr = buf; |
| vos_msg.bodyval = 0; |
| |
| if (VOS_STATUS_SUCCESS != |
| vos_mq_post_message(VOS_MQ_ID_WDA, &vos_msg)) { |
| WMA_LOGP("%s: Failed to post WDA_GET_LINK_STATUS_RSP_IND msg", |
| __func__); |
| vos_mem_free(buf); |
| return -1; |
| } |
| WMA_LOGD("posted WDA_GET_LINK_STATUS_RSP_IND"); |
| |
| return 0; |
| } |
| |
| /** |
| * wma_update_mib_stats() - send mib stats to hdd |
| * @wma_handle: pointer to wma handle. |
| * @event: mib stats |
| * |
| * This API handles the requested Mib stats and calls the callback to |
| * update hdd |
| * |
| * Return: Success or error code |
| */ |
| static int wma_update_mib_stats(tp_wma_handle wma_handle , |
| wmi_mib_stats *event) |
| { |
| struct mib_stats_metrics mib_stats; |
| tpAniSirGlobal mac = (tpAniSirGlobal)vos_get_context( |
| VOS_MODULE_ID_PE, wma_handle->vos_context); |
| |
| if (!mac) { |
| WMA_LOGE("%s: Invalid mac context", __func__); |
| return -EINVAL; |
| } |
| if (!mac->sme.csr_mib_stats_callback) { |
| WMA_LOGE("%s: Callback not registered", __func__); |
| return -EINVAL; |
| } |
| |
| mib_stats.mib_counters.tx_frags = |
| event->tx_mpdu_grp_frag_cnt; |
| mib_stats.mib_counters.group_tx_frames = |
| event->tx_msdu_grp_frm_cnt; |
| mib_stats.mib_counters.failed_cnt = event->tx_msdu_fail_cnt; |
| mib_stats.mib_counters.rx_frags = event->rx_mpdu_frag_cnt; |
| mib_stats.mib_counters.group_rx_frames = |
| event->rx_msdu_grp_frm_cnt; |
| mib_stats.mib_counters.fcs_error_cnt = |
| event->rx_mpdu_fcs_err; |
| mib_stats.mib_counters.tx_frames = |
| event->tx_msdu_frm_cnt; |
| mib_stats.mib_mac_statistics.retry_cnt = |
| event->tx_msdu_retry_cnt; |
| mib_stats.mib_mac_statistics.frame_dup_cnt = |
| event->rx_frm_dup_cnt; |
| mib_stats.mib_mac_statistics.rts_success_cnt = |
| event->tx_rts_success_cnt; |
| mib_stats.mib_mac_statistics.rts_fail_cnt = |
| event->tx_rts_fail_cnt; |
| |
| mib_stats.mib_qos_counters.qos_tx_frag_cnt = |
| event->tx_Qos_mpdu_grp_frag_cnt; |
| mib_stats.mib_qos_counters.qos_retry_cnt = |
| event->tx_Qos_msdu_retry_UP; |
| mib_stats.mib_qos_counters.qos_failed_cnt = event->tx_Qos_msdu_fail_UP; |
| mib_stats.mib_qos_counters.qos_frame_dup_cnt = |
| event->rx_Qos_frm_dup_cnt_UP; |
| mib_stats.mib_qos_counters.qos_rts_success_cnt = |
| event->tx_Qos_rts_success_cnt_UP; |
| mib_stats.mib_qos_counters.qos_rts_fail_cnt = |
| event->tx_Qos_rts_fail_cnt_UP; |
| mib_stats.mib_qos_counters.qos_rx_frag_cnt = |
| event->rx_Qos_mpdu_frag_cnt_UP; |
| mib_stats.mib_qos_counters.qos_tx_frame_cnt = |
| event->tx_Qos_msdu_frm_cnt_UP; |
| mib_stats.mib_qos_counters.qos_discarded_frame_cnt = |
| event->rx_Qos_msdu_discard_cnt_UP; |
| mib_stats.mib_qos_counters.qos_mpdu_rx_cnt = |
| event->rx_Qos_mpdu_cnt; |
| mib_stats.mib_qos_counters.qos_retries_rx_cnt = |
| event->rx_Qos_mpdu_retryBit_cnt; |
| |
| mib_stats.mib_rsna_stats.cmac_icv_err = |
| event->rsna_Mgmt_discard_CCMP_replay_err_cnt; |
| mib_stats.mib_rsna_stats.tkip_icv_err = event->rsna_TKIP_icv_err_cnt; |
| mib_stats.mib_rsna_stats.tkip_replays = event->rsna_TKIP_replay_err_cnt; |
| mib_stats.mib_rsna_stats.ccmp_decrypt_err = |
| event->rsna_CCMP_decrypt_err_cnt; |
| |
| mib_stats.mib_counters_group3.tx_ampdu_cnt = |
| event->tx_ampdu_cnt; |
| mib_stats.mib_counters_group3.tx_mpdus_in_ampdu_cnt = |
| event->tx_mpdu_cnt_in_ampdu; |
| mib_stats.mib_counters_group3.tx_octets_in_ampdu_cnt = |
| event->tx_octets_in_ampdu.upload.high; |
| mib_stats.mib_counters_group3.tx_octets_in_ampdu_cnt = |
| mib_stats.mib_counters_group3.tx_octets_in_ampdu_cnt << 32; |
| mib_stats.mib_counters_group3.tx_octets_in_ampdu_cnt += |
| event->tx_octets_in_ampdu.upload.low; |
| |
| mib_stats.mib_counters_group3.ampdu_rx_cnt = |
| event->rx_ampdu_cnt; |
| mib_stats.mib_counters_group3.mpdu_in_rx_ampdu_cnt = |
| event->rx_mpdu_cnt_in_ampdu; |
| mib_stats.mib_counters_group3.rx_octets_in_ampdu_cnt = |
| event->rx_octets_in_ampdu.upload.rx_octets_in_ampdu_high; |
| mib_stats.mib_counters_group3.rx_octets_in_ampdu_cnt = |
| mib_stats.mib_counters_group3.rx_octets_in_ampdu_cnt << 32; |
| mib_stats.mib_counters_group3.rx_octets_in_ampdu_cnt += |
| event->rx_octets_in_ampdu.upload.rx_octets_in_ampdu_low; |
| |
| /* ccmp replays attack count will be updated |
| * by host |
| */ |
| mib_stats.mib_rsna_stats.ccmp_replays = |
| wma_handle->ccmp_replays_attack_cnt; |
| |
| /* Update stats using callback to hdd */ |
| mac->sme.csr_mib_stats_callback(&mib_stats, mac->sme.mib_stats_context); |
| WMA_LOGD("%s: Invoke sme.csr_mib_stats_callback callback", __func__); |
| return 0; |
| } |
| |
| static int wma_stats_event_handler(void *handle, u_int8_t *cmd_param_info, |
| u_int32_t len) |
| { |
| WMI_UPDATE_STATS_EVENTID_param_tlvs *param_buf; |
| wmi_stats_event_fixed_param *event; |
| wmi_per_chain_rssi_stats *rssi_event; |
| vos_msg_t vos_msg = {0}; |
| u_int32_t buf_size, buf_data_size; |
| u_int8_t *buf, *temp; |
| u_int32_t buf_len = 0; |
| bool excess_data = false; |
| bool rssi_stats_support = FALSE; |
| |
| param_buf = (WMI_UPDATE_STATS_EVENTID_param_tlvs *)cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGA("%s: Invalid stats event", __func__); |
| return -EINVAL; |
| } |
| event = param_buf->fixed_param; |
| |
| do { |
| if (event->num_pdev_stats > ((WMA_SVC_MSG_MAX_SIZE - |
| sizeof(*event)) / sizeof(wmi_pdev_stats))) { |
| excess_data = true; |
| break; |
| } else { |
| buf_len += event->num_pdev_stats * sizeof(wmi_pdev_stats); |
| } |
| if (event->num_vdev_stats > ((WMA_SVC_MSG_MAX_SIZE - |
| sizeof(*event)) / sizeof(wmi_vdev_stats))) { |
| excess_data = true; |
| break; |
| } else { |
| buf_len += event->num_vdev_stats * sizeof(wmi_vdev_stats); |
| } |
| if (event->num_peer_stats > ((WMA_SVC_MSG_MAX_SIZE - |
| sizeof(*event)) / sizeof(wmi_peer_stats))) { |
| excess_data = true; |
| break; |
| } else { |
| buf_len += event->num_peer_stats * sizeof(wmi_peer_stats); |
| } |
| if (event->num_mib_stats > ((WMA_SVC_MSG_MAX_SIZE - |
| sizeof(*event)) / sizeof(wmi_mib_stats))) { |
| excess_data = true; |
| break; |
| } else { |
| buf_len += event->num_mib_stats * sizeof(wmi_mib_stats); |
| } |
| rssi_event = |
| (wmi_per_chain_rssi_stats *) param_buf->chain_stats; |
| if (rssi_event) { |
| if ((rssi_event->num_per_chain_rssi_stats > |
| ((WMA_SVC_MSG_MAX_SIZE - sizeof(*event)) / |
| sizeof(wmi_rssi_stats)))) { |
| excess_data = true; |
| break; |
| } else { |
| buf_len += |
| rssi_event->num_per_chain_rssi_stats * |
| sizeof(wmi_rssi_stats); |
| } |
| } |
| } while (0); |
| |
| if (excess_data || |
| (sizeof(*event) > WMA_SVC_MSG_MAX_SIZE - buf_len)) { |
| WMA_LOGE("excess wmi buffer: stats pdev %d vdev %d peer %d", |
| event->num_pdev_stats, event->num_vdev_stats, |
| event->num_peer_stats); |
| VOS_ASSERT(0); |
| return -EINVAL; |
| } |
| |
| buf_size = sizeof(*event) + |
| (event->num_pdev_stats * sizeof(wmi_pdev_stats)) + |
| (event->num_vdev_stats * sizeof(wmi_vdev_stats)) + |
| (event->num_peer_stats * sizeof(wmi_peer_stats)) + |
| (event->num_mib_stats * sizeof(wmi_mib_stats)); |
| |
| buf_data_size = buf_size - sizeof(*event); |
| |
| rssi_event = param_buf->chain_stats; |
| if (rssi_event) { |
| if ((((rssi_event->tlv_header & 0xFFFF0000) >> 16) == |
| WMITLV_TAG_STRUC_wmi_per_chain_rssi_stats) && |
| ((rssi_event->tlv_header & 0x0000FFFF) == |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_per_chain_rssi_stats))) { |
| buf_size += sizeof(*rssi_event) + |
| (rssi_event->num_per_chain_rssi_stats * |
| sizeof(wmi_rssi_stats)); |
| rssi_stats_support = TRUE; |
| } |
| } |
| |
| buf = vos_mem_malloc(buf_size); |
| if (!buf) { |
| WMA_LOGE("%s: Failed alloc memory for buf", __func__); |
| return -ENOMEM; |
| } |
| vos_mem_zero(buf, buf_size); |
| vos_mem_copy(buf, event, sizeof(*event)); |
| temp = buf + sizeof(*event); |
| vos_mem_copy(temp, (uint8_t *)param_buf->data, |
| buf_data_size); |
| temp += buf_data_size; |
| if (rssi_stats_support) { |
| vos_mem_copy(temp, rssi_event, sizeof(*rssi_event)); |
| temp += sizeof(*rssi_event); |
| vos_mem_copy(temp, (uint8_t *)param_buf->rssi_stats, |
| (rssi_event->num_per_chain_rssi_stats * |
| sizeof(wmi_rssi_stats))); |
| } |
| vos_msg.type = WDA_FW_STATS_IND; |
| vos_msg.bodyptr = buf; |
| vos_msg.bodyval = 0; |
| |
| if (VOS_STATUS_SUCCESS != |
| vos_mq_post_message(VOS_MQ_ID_WDA, &vos_msg)) { |
| WMA_LOGP("%s: Failed to post WDA_FW_STATS_IND msg", __func__); |
| vos_mem_free(buf); |
| return -1; |
| } |
| return 0; |
| } |
| |
| /** |
| * wma_fill_peer_info() - fill SIR peer info from WMI peer info struct |
| * @wma: wma interface |
| * @stats_info: WMI peer info pointer |
| * @peer_info: SIR peer info pointer |
| * |
| * This function will fill SIR peer info from WMI peer info struct |
| * |
| * Return: None |
| */ |
| static void wma_fill_peer_info(tp_wma_handle wma, |
| wmi_peer_stats_info *stats_info, |
| struct sir_peer_info_ext *peer_info) |
| { |
| peer_info->tx_packets = stats_info->tx_packets.low_32; |
| peer_info->tx_bytes = stats_info->tx_bytes.high_32; |
| peer_info->tx_bytes <<= 32; |
| peer_info->tx_bytes += stats_info->tx_bytes.low_32; |
| peer_info->rx_packets = stats_info->rx_packets.low_32; |
| peer_info->rx_bytes = stats_info->rx_bytes.high_32; |
| peer_info->rx_bytes <<= 32; |
| peer_info->rx_bytes += stats_info->rx_bytes.low_32; |
| peer_info->tx_retries = stats_info->tx_retries; |
| peer_info->tx_failed = stats_info->tx_failed; |
| peer_info->rssi = stats_info->peer_rssi; |
| peer_info->tx_rate = stats_info->last_tx_bitrate_kbps; |
| peer_info->tx_rate_code = stats_info->last_tx_rate_code; |
| peer_info->rx_rate = stats_info->last_rx_bitrate_kbps; |
| peer_info->rx_rate_code = stats_info->last_rx_rate_code; |
| } |
| |
| /** |
| * wma_peer_info_ext_rsp() - fill SIR peer info from WMI peer info struct |
| * @handle: wma interface |
| * @buf: wmi event buf pointer |
| * |
| * This function will send eWNI_SME_GET_PEER_INFO_EXT_IND to SME |
| * |
| * Return: 0 on success, error code otherwise |
| */ |
| static VOS_STATUS wma_peer_info_ext_rsp(tp_wma_handle wma, u_int8_t *buf) |
| { |
| wmi_peer_stats_info_event_fixed_param *event; |
| wmi_peer_stats_info *stats_info = NULL; |
| struct sir_peer_info_ext_resp *resp; |
| struct sir_peer_info_ext *peer_info; |
| vos_msg_t sme_msg = {0}; |
| int i, j = 0; |
| VOS_STATUS vos_status; |
| |
| event = (wmi_peer_stats_info_event_fixed_param *)buf; |
| stats_info = (wmi_peer_stats_info *)(buf + |
| sizeof(wmi_peer_stats_info_event_fixed_param)); |
| |
| if (wma->get_one_peer_info) { |
| resp = vos_mem_malloc(sizeof(struct sir_peer_info_ext_resp) + |
| sizeof(resp->info[0])); |
| if (!resp) { |
| WMA_LOGE(FL("resp allocation failed.")); |
| return VOS_STATUS_E_NOMEM; |
| } |
| resp->count = 0; |
| peer_info = &resp->info[0]; |
| for (i = 0; i < event->num_peers; i++) { |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&stats_info->peer_macaddr, |
| peer_info->peer_macaddr); |
| |
| if (TRUE == vos_mem_compare( |
| peer_info->peer_macaddr, |
| wma->peer_macaddr.bytes, |
| VOS_MAC_ADDR_SIZE)) { |
| wma_fill_peer_info(wma, stats_info, peer_info); |
| resp->count++; |
| break; |
| } |
| |
| stats_info = stats_info + 1; |
| } |
| } else { |
| resp = vos_mem_malloc(sizeof(struct sir_peer_info_ext_resp) + |
| event->num_peers * sizeof(resp->info[0])); |
| if (!resp) { |
| WMA_LOGE(FL("resp allocation failed.")); |
| return VOS_STATUS_E_NOMEM; |
| } |
| resp->count = event->num_peers; |
| for (i = 0; i < event->num_peers; i++) { |
| peer_info = &resp->info[j]; |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&stats_info->peer_macaddr, |
| peer_info->peer_macaddr); |
| |
| if (TRUE == vos_mem_compare( |
| peer_info->peer_macaddr, |
| wma->myaddr, VOS_MAC_ADDR_SIZE)) { |
| resp->count = resp->count - 1; |
| continue; |
| } |
| wma_fill_peer_info(wma, stats_info, peer_info); |
| stats_info = stats_info + 1; |
| j++; |
| } |
| } |
| |
| sme_msg.type = eWNI_SME_GET_PEER_INFO_EXT_IND; |
| sme_msg.bodyptr = resp; |
| sme_msg.bodyval = 0; |
| |
| vos_status = vos_mq_post_message(VOS_MODULE_ID_SME, &sme_msg); |
| if (!VOS_IS_STATUS_SUCCESS(vos_status)) { |
| WMA_LOGE("%s: Fail to post get peer info msg", __func__); |
| vos_mem_free(resp); |
| } |
| |
| return vos_status; |
| } |
| |
| /** |
| * dump_peer_stats_info() - dump wmi peer info struct |
| * @event: wmi peer info fixed param pointer |
| * @peer_stats: wmi peer stats info pointer |
| * |
| * This function will dump wmi peer info struct |
| * |
| * Return: None |
| */ |
| static void dump_peer_stats_info(wmi_peer_stats_info_event_fixed_param *event, |
| wmi_peer_stats_info *peer_stats) |
| { |
| int i; |
| wmi_peer_stats_info *stats = peer_stats; |
| char mac[6]; |
| |
| WMA_LOGI("%s vdev_id %d, num_peers %d more_data %d", |
| __func__, event->vdev_id, |
| event->num_peers, event->more_data); |
| |
| for (i = 0; i < event->num_peers; i++) { |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&stats->peer_macaddr, mac); |
| WMA_LOGI("%s mac %pM", __func__, mac); |
| WMA_LOGI("%s tx_bytes %d %d tx_packets %d %d", |
| __func__, |
| stats->tx_bytes.low_32, |
| stats->tx_bytes.high_32, |
| stats->tx_packets.low_32, |
| stats->tx_packets.high_32); |
| WMA_LOGI("%s rx_bytes %d %d rx_packets %d %d", |
| __func__, |
| stats->rx_bytes.low_32, |
| stats->rx_bytes.high_32, |
| stats->rx_packets.low_32, |
| stats->rx_packets.high_32); |
| WMA_LOGI("%s tx_retries %d tx_failed %d", |
| __func__, stats->tx_retries, stats->tx_failed); |
| WMA_LOGI("%s tx_rate_code %x rx_rate_code %x", |
| __func__, |
| stats->last_tx_rate_code, |
| stats->last_rx_rate_code); |
| WMA_LOGI("%s tx_rate %x rx_rate %x", |
| __func__, |
| stats->last_tx_bitrate_kbps, |
| stats->last_rx_bitrate_kbps); |
| WMA_LOGI("%s peer_rssi %d", __func__, stats->peer_rssi); |
| stats++; |
| } |
| } |
| |
| /** |
| * wma_peer_info_event_handler() - Handler for WMI_PEER_STATS_INFO_EVENTID |
| * @handle: WMA global handle |
| * @cmd_param_info: Command event data |
| * @len: Length of @cmd_param_info |
| * |
| * This function will handle WMI_PEER_STATS_INFO_EVENTID |
| * |
| * Return: 0 on success, error code otherwise |
| */ |
| static int wma_peer_info_event_handler(void *handle, u_int8_t *cmd_param_info, |
| u_int32_t len) |
| { |
| WMI_PEER_STATS_INFO_EVENTID_param_tlvs *param_buf; |
| wmi_peer_stats_info_event_fixed_param *event; |
| vos_msg_t vos_msg = {0}; |
| u_int32_t buf_size; |
| u_int8_t *buf; |
| |
| param_buf = |
| (WMI_PEER_STATS_INFO_EVENTID_param_tlvs *)cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGA("%s: Invalid stats event", __func__); |
| return -EINVAL; |
| } |
| |
| WMA_LOGI("%s Recv WMI_PEER_STATS_INFO_EVENTID", __func__); |
| event = param_buf->fixed_param; |
| if (event->num_peers > |
| ((WMA_SVC_MSG_MAX_SIZE - |
| sizeof(wmi_peer_stats_info_event_fixed_param))/ |
| sizeof(wmi_peer_stats_info))) { |
| WMA_LOGE("Excess num of peers from fw %d", event->num_peers); |
| return -EINVAL; |
| } |
| buf_size = sizeof(wmi_peer_stats_info_event_fixed_param) + |
| sizeof(wmi_peer_stats_info) * event->num_peers; |
| buf = vos_mem_malloc(buf_size); |
| if (!buf) { |
| WMA_LOGE("%s: Failed alloc memory for buf", __func__); |
| return -ENOMEM; |
| } |
| |
| vos_mem_zero(buf, buf_size); |
| vos_mem_copy(buf, param_buf->fixed_param, |
| sizeof(wmi_peer_stats_info_event_fixed_param)); |
| vos_mem_copy((buf + sizeof(wmi_peer_stats_info_event_fixed_param)), |
| param_buf->peer_stats_info, |
| sizeof(wmi_peer_stats_info) * event->num_peers); |
| WMA_LOGI("%s dump peer stats info", __func__); |
| dump_peer_stats_info(event, param_buf->peer_stats_info); |
| |
| vos_msg.type = WDA_GET_PEER_INFO_EXT_IND; |
| vos_msg.bodyptr = buf; |
| vos_msg.bodyval = 0; |
| |
| if (VOS_STATUS_SUCCESS != |
| vos_mq_post_message(VOS_MQ_ID_WDA, &vos_msg)) { |
| WMA_LOGP("%s: Failed to post WDA_GET_LINK_STATUS_RSP_IND msg", |
| __func__); |
| vos_mem_free(buf); |
| return eHAL_STATUS_FAILURE; |
| } |
| WMA_LOGD("posted WDA_GET_PEER_INFO_EXT_IND"); |
| |
| return 0; |
| } |
| |
| /** |
| * wma_get_peer_info_ext() - get peer info |
| * @handle: wma interface |
| * @prssi_req: get peer info request information |
| * |
| * This function will send WMI_REQUEST_PEER_STATS_INFO_CMDID to FW |
| * |
| * Return: 0 on success, otherwise error value |
| */ |
| static VOS_STATUS wma_get_peer_info_ext(WMA_HANDLE handle, |
| struct sir_peer_info_ext_req *peer_info_req) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle)handle; |
| wmi_request_peer_stats_info_cmd_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len; |
| uint8_t *buf_ptr; |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue get rssi", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| WMA_LOGI("%s send WMI_REQUEST_PEER_STATS_INFO_CMDID", __func__); |
| |
| len = sizeof(wmi_request_peer_stats_info_cmd_fixed_param); |
| wmi_buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (uint8_t *)wmi_buf_data(wmi_buf); |
| |
| cmd = (wmi_request_peer_stats_info_cmd_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_request_peer_stats_info_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_request_peer_stats_info_cmd_fixed_param)); |
| cmd->vdev_id = peer_info_req->sessionid; |
| cmd->request_type = WMI_REQUEST_ONE_PEER_STATS_INFO; |
| wma_handle->get_one_peer_info = TRUE; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(peer_info_req->peer_macaddr.bytes, |
| &cmd->peer_macaddr); |
| cmd->reset_after_request = peer_info_req->reset_after_request; |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, wmi_buf, len, |
| WMI_REQUEST_PEER_STATS_INFO_CMDID)) { |
| WMA_LOGE("Failed to send host stats request to fw"); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGI("%s vdev_id %d, mac %pM, req_type %x, reset %x", |
| __func__, |
| cmd->vdev_id, |
| peer_info_req->peer_macaddr.bytes, |
| cmd->request_type, |
| cmd->reset_after_request); |
| |
| vos_mem_copy(&(wma_handle->peer_macaddr), |
| &(peer_info_req->peer_macaddr), |
| VOS_MAC_ADDR_SIZE); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static VOS_STATUS wma_send_link_speed(u_int32_t link_speed) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| vos_msg_t sme_msg = {0} ; |
| tSirLinkSpeedInfo *ls_ind = |
| (tSirLinkSpeedInfo *) vos_mem_malloc(sizeof(tSirLinkSpeedInfo)); |
| if (!ls_ind) { |
| WMA_LOGE("%s: Memory allocation failed.", __func__); |
| vos_status = VOS_STATUS_E_NOMEM; |
| } |
| else |
| { |
| ls_ind->estLinkSpeed = link_speed; |
| sme_msg.type = eWNI_SME_LINK_SPEED_IND; |
| sme_msg.bodyptr = ls_ind; |
| sme_msg.bodyval = 0; |
| |
| vos_status = vos_mq_post_message(VOS_MODULE_ID_SME, &sme_msg); |
| if (!VOS_IS_STATUS_SUCCESS(vos_status) ) { |
| WMA_LOGE("%s: Fail to post linkspeed ind msg", __func__); |
| vos_mem_free(ls_ind); |
| } |
| } |
| return vos_status; |
| } |
| |
| static int wma_link_speed_event_handler(void *handle, u_int8_t *cmd_param_info, |
| u_int32_t len) |
| { |
| WMI_PEER_ESTIMATED_LINKSPEED_EVENTID_param_tlvs *param_buf; |
| wmi_peer_estimated_linkspeed_event_fixed_param *event; |
| VOS_STATUS vos_status; |
| |
| param_buf = (WMI_PEER_ESTIMATED_LINKSPEED_EVENTID_param_tlvs *)cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid linkspeed event", __func__); |
| return -EINVAL; |
| } |
| event = param_buf->fixed_param; |
| vos_status = wma_send_link_speed(event->est_linkspeed_kbps); |
| if (!VOS_IS_STATUS_SUCCESS(vos_status)) { |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| |
| /** |
| * wma_handle_sta_peer_info() - handle peer information in |
| * peer stats |
| * @num_peer_stats: peer number |
| * @peer_stats: peer stats received from firmware |
| * @peer_macaddr: the specified mac address |
| * @sapaddr: sap mac address |
| * |
| * This function will send eWNI_SME_GET_PEER_INFO_IND |
| * to sme with stations' information |
| * |
| */ |
| static void wma_handle_sta_peer_info(uint32_t num_peer_stats, |
| wmi_peer_stats *peer_stats, |
| v_MACADDR_t peer_macaddr, |
| uint8_t *sapaddr) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_mac_addr temp_addr; |
| struct sir_peer_info_resp *peer_info; |
| vos_msg_t sme_msg = {0}; |
| uint32_t i = 0; |
| uint32_t j = 0; |
| |
| if (!vos_is_macaddr_broadcast(&peer_macaddr)) { |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(peer_macaddr.bytes, &temp_addr); |
| for (i = 0; i < num_peer_stats; i++) { |
| if ((((temp_addr.mac_addr47to32) & 0x0000ffff) == |
| ((peer_stats->peer_macaddr.mac_addr47to32) & |
| 0x0000ffff)) |
| &&(temp_addr.mac_addr31to0 == |
| peer_stats->peer_macaddr.mac_addr31to0)) { |
| |
| break; |
| } |
| peer_stats = peer_stats + 1; |
| } |
| peer_info = vos_mem_malloc(sizeof(*peer_info) + |
| sizeof(peer_info->info[0])); |
| if (NULL == peer_info) { |
| WMA_LOGE("%s: Memory allocation failed.", __func__); |
| return; |
| } |
| if (i < num_peer_stats) { |
| peer_info->count = 1; |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&(peer_stats->peer_macaddr), |
| peer_info->info[0].peer_macaddr); |
| peer_info->info[0].rssi = |
| peer_stats->peer_rssi; |
| peer_info->info[0].tx_rate = peer_stats->peer_tx_rate; |
| peer_info->info[0].rx_rate = peer_stats->peer_rx_rate; |
| WMA_LOGD("%s peer %pM rssi %d tx_rate %d rx_rate %d", |
| __func__, |
| peer_info->info[0].peer_macaddr, |
| peer_stats->peer_rssi, |
| peer_stats->peer_tx_rate, |
| peer_stats->peer_rx_rate); |
| } else { |
| WMA_LOGE("%s: no match mac address", __func__); |
| peer_info->count = 0; |
| } |
| } else { |
| peer_info = vos_mem_malloc(sizeof(*peer_info) + |
| num_peer_stats * sizeof(peer_info->info[0])); |
| if (NULL == peer_info) { |
| WMA_LOGE("%s: Memory allocation failed.", __func__); |
| return; |
| } |
| peer_info->count = num_peer_stats; |
| |
| for (i = 0; i < num_peer_stats; i++) { |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&(peer_stats->peer_macaddr), |
| peer_info->info[j].peer_macaddr); |
| peer_info->info[j].rssi = peer_stats->peer_rssi; |
| peer_info->info[j].tx_rate = peer_stats->peer_tx_rate; |
| peer_info->info[j].rx_rate = peer_stats->peer_rx_rate; |
| WMA_LOGD("%s peer %pM rssi %d tx_rate %d rx_rate %d", |
| __func__, |
| peer_info->info[j].peer_macaddr, |
| peer_stats->peer_rssi, |
| peer_stats->peer_tx_rate, |
| peer_stats->peer_rx_rate); |
| if (TRUE == vos_mem_compare( |
| peer_info->info[j].peer_macaddr, |
| sapaddr, VOS_MAC_ADDR_SIZE)) { |
| |
| peer_info->count = peer_info->count - 1; |
| } else { |
| j++; |
| } |
| peer_stats = peer_stats + 1; |
| } |
| WMA_LOGD("WDA send peer num %d", peer_info->count); |
| } |
| |
| sme_msg.type = eWNI_SME_GET_PEER_INFO_IND; |
| sme_msg.bodyptr = peer_info; |
| sme_msg.bodyval = 0; |
| |
| vos_status = vos_mq_post_message(VOS_MODULE_ID_SME, &sme_msg); |
| if (!VOS_IS_STATUS_SUCCESS(vos_status) ) { |
| WMA_LOGE("%s: Fail to post get rssi msg", __func__); |
| vos_mem_free(peer_info); |
| } |
| |
| return; |
| } |
| |
| static void wma_fw_stats_ind(tp_wma_handle wma, u_int8_t *buf) |
| { |
| wmi_stats_event_fixed_param *event = (wmi_stats_event_fixed_param *)buf; |
| wmi_pdev_stats *pdev_stats; |
| wmi_vdev_stats *vdev_stats; |
| wmi_peer_stats *peer_stats; |
| wmi_mib_stats *mib_stats; |
| wmi_rssi_stats *rssi_stats; |
| wmi_per_chain_rssi_stats *rssi_event; |
| struct wma_txrx_node *node; |
| u_int8_t i, *temp; |
| |
| temp = buf + sizeof(*event); |
| |
| WMA_LOGD("%s: num_stats: pdev: %u vdev: %u peer %u mib %u", |
| __func__, event->num_pdev_stats, event->num_vdev_stats, |
| event->num_peer_stats, event->num_mib_stats); |
| if (event->num_pdev_stats > 0) { |
| for (i = 0; i < event->num_pdev_stats; i++) { |
| pdev_stats = (wmi_pdev_stats*)temp; |
| wma_update_pdev_stats(wma, pdev_stats); |
| temp += sizeof(wmi_pdev_stats); |
| } |
| } |
| |
| if (event->num_vdev_stats > 0) { |
| for (i = 0; i < event->num_vdev_stats; i++) { |
| vdev_stats = (wmi_vdev_stats *)temp; |
| wma_update_vdev_stats(wma, vdev_stats); |
| temp += sizeof(wmi_vdev_stats); |
| } |
| } |
| |
| if (event->num_peer_stats > 0) { |
| if (wma->get_sta_peer_info == TRUE) { |
| wma_handle_sta_peer_info(event->num_peer_stats, |
| (wmi_peer_stats *)temp, |
| wma->peer_macaddr, |
| wma->myaddr); |
| } else { |
| for (i = 0; i < event->num_peer_stats; i++) { |
| peer_stats = (wmi_peer_stats *)temp; |
| wma_update_peer_stats(wma, peer_stats); |
| temp += sizeof(wmi_peer_stats); |
| } |
| } |
| } |
| |
| if (event->num_mib_stats > 0) { |
| for (i = 0; i < event->num_mib_stats; i++) { |
| mib_stats = (wmi_mib_stats *)temp; |
| wma_update_mib_stats(wma, mib_stats); |
| temp += sizeof(wmi_mib_stats); |
| } |
| } |
| |
| rssi_event = (wmi_per_chain_rssi_stats *)temp; |
| if ((((rssi_event->tlv_header & 0xFFFF0000) >> 16) == |
| WMITLV_TAG_STRUC_wmi_per_chain_rssi_stats) && |
| ((rssi_event->tlv_header & 0x0000FFFF) == |
| WMITLV_GET_STRUCT_TLVLEN(wmi_per_chain_rssi_stats))) { |
| if (rssi_event->num_per_chain_rssi_stats > 0) { |
| temp += sizeof(*rssi_event); |
| for (i = 0; i < rssi_event->num_per_chain_rssi_stats; |
| i++) { |
| rssi_stats = (wmi_rssi_stats *)temp; |
| wma_update_rssi_stats(wma, rssi_stats); |
| temp += sizeof(wmi_rssi_stats); |
| } |
| } |
| } |
| |
| for (i = 0; i < wma->max_bssid; i++) { |
| node = &wma->interfaces[i]; |
| if (node->fw_stats_set & FW_PEER_STATS_SET) { |
| WMA_LOGD("<--STATS RSP VDEV_ID:%d", i); |
| wma_post_stats(wma, node); |
| } |
| } |
| } |
| |
| #ifdef FEATURE_WLAN_EXTSCAN |
| /** |
| * wma_extscan_rsp_handler() - extscan rsp handler |
| * @wma: WMA global handle |
| * @buf: event fixed param buffer |
| * |
| * Return: 0 on success, error number otherwise |
| */ |
| static int wma_extscan_rsp_handler(tp_wma_handle wma, uint8_t *buf) |
| { |
| wmi_extscan_start_stop_event_fixed_param *event; |
| struct sir_extscan_generic_response *extscan_ind; |
| uint16_t event_type; |
| uint8_t vdev_id; |
| tpAniSirGlobal mac_ctx = (tpAniSirGlobal)vos_get_context( |
| VOS_MODULE_ID_PE, wma->vos_context); |
| if (!mac_ctx) { |
| WMA_LOGE("%s: Invalid mac_ctx", __func__); |
| return -EINVAL; |
| } |
| if (!mac_ctx->sme.pExtScanIndCb) { |
| WMA_LOGE("%s: Callback not registered", __func__); |
| return -EINVAL; |
| } |
| if (!buf) { |
| WMA_LOGE("Invalid event buffer"); |
| return -EINVAL; |
| } |
| |
| event = (wmi_extscan_start_stop_event_fixed_param *)buf; |
| |
| if (event->vdev_id >= wma->max_bssid) { |
| WMA_LOGE("%s: max vdev id's %d reached", |
| __func__, event->vdev_id); |
| return -EINVAL; |
| } |
| |
| vdev_id = event->vdev_id; |
| extscan_ind = vos_mem_malloc(sizeof(*extscan_ind)); |
| if (!extscan_ind) { |
| WMA_LOGE("%s: extscan memory allocation failed", __func__); |
| return -ENOMEM; |
| } |
| |
| switch (event->command) { |
| case WMI_EXTSCAN_START_CMDID: |
| event_type = eSIR_EXTSCAN_START_RSP; |
| extscan_ind->status = event->status; |
| extscan_ind->request_id = event->request_id; |
| |
| if (!extscan_ind->status) |
| wma->interfaces[vdev_id].extscan_in_progress = true; |
| |
| break; |
| case WMI_EXTSCAN_STOP_CMDID: |
| event_type = eSIR_EXTSCAN_STOP_RSP; |
| extscan_ind->status = event->status; |
| extscan_ind->request_id = event->request_id; |
| |
| if (!extscan_ind->status) |
| wma->interfaces[vdev_id].extscan_in_progress = false; |
| |
| break; |
| case WMI_EXTSCAN_CONFIGURE_WLAN_CHANGE_MONITOR_CMDID: |
| extscan_ind->status = event->status; |
| extscan_ind->request_id = event->request_id; |
| if (event->mode == WMI_EXTSCAN_MODE_STOP) { |
| event_type = |
| eSIR_EXTSCAN_RESET_SIGNIFICANT_WIFI_CHANGE_RSP; |
| } else { |
| event_type = |
| eSIR_EXTSCAN_SET_SIGNIFICANT_WIFI_CHANGE_RSP; |
| } |
| break; |
| case WMI_EXTSCAN_CONFIGURE_HOTLIST_MONITOR_CMDID: |
| extscan_ind->status = event->status; |
| extscan_ind->request_id = event->request_id; |
| if (event->mode == WMI_EXTSCAN_MODE_STOP) { |
| event_type = |
| eSIR_EXTSCAN_RESET_BSSID_HOTLIST_RSP; |
| } else { |
| event_type = |
| eSIR_EXTSCAN_SET_BSSID_HOTLIST_RSP; |
| } |
| break; |
| case WMI_EXTSCAN_GET_CACHED_RESULTS_CMDID: |
| extscan_ind->status = event->status; |
| extscan_ind->request_id = event->request_id; |
| event_type = eSIR_EXTSCAN_CACHED_RESULTS_RSP; |
| break; |
| case WMI_EXTSCAN_CONFIGURE_HOTLIST_SSID_MONITOR_CMDID: |
| extscan_ind->status = event->status; |
| extscan_ind->request_id = event->request_id; |
| if (event->mode == WMI_EXTSCAN_MODE_STOP) { |
| event_type = |
| eSIR_EXTSCAN_RESET_SSID_HOTLIST_RSP; |
| } else { |
| event_type = |
| eSIR_EXTSCAN_SET_SSID_HOTLIST_RSP; |
| } |
| break; |
| default: |
| WMA_LOGE("%s: Unknown event %d from target vdev_id %u", |
| __func__, event->status, vdev_id); |
| vos_mem_free(extscan_ind); |
| return -EINVAL; |
| } |
| mac_ctx->sme.pExtScanIndCb(mac_ctx->hHdd, |
| event_type, extscan_ind); |
| WMA_LOGD("%s: sending event to umac for requestid %u with status %d", |
| __func__, |
| extscan_ind->request_id, extscan_ind->status); |
| vos_mem_free(extscan_ind); |
| return 0; |
| } |
| |
| /** |
| * wma_extscan_start_stop_event_handler() - extscan event handler |
| * @handle: WMA global handle |
| * @cmd_param_info: command event data |
| * @len: Length of @cmd_param_info |
| * |
| * Return: 0 on success, error number otherwise |
| */ |
| static int wma_extscan_start_stop_event_handler(void *handle, |
| uint8_t *cmd_param_info, uint32_t len) |
| { |
| WMI_EXTSCAN_START_STOP_EVENTID_param_tlvs *param_buf; |
| wmi_extscan_start_stop_event_fixed_param *event; |
| u_int8_t *buf; |
| int buf_len = sizeof(*event); |
| vos_msg_t vos_msg = {0}; |
| |
| WMA_LOGI("%s: Enter", __func__); |
| param_buf = (WMI_EXTSCAN_START_STOP_EVENTID_param_tlvs *) |
| cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid extscan event", __func__); |
| return -EINVAL; |
| } |
| |
| event = param_buf->fixed_param; |
| buf = vos_mem_malloc(buf_len); |
| if (!buf) { |
| WMA_LOGE("%s: extscan memory allocation failed", __func__); |
| return -ENOMEM; |
| } |
| |
| vos_mem_zero(buf, buf_len); |
| vos_mem_copy(buf, (u_int8_t *)event, buf_len); |
| |
| vos_msg.type = WDA_EXTSCAN_STATUS_IND; |
| vos_msg.bodyptr = buf; |
| vos_msg.bodyval = 0; |
| |
| if (VOS_STATUS_SUCCESS != |
| vos_mq_post_message(VOS_MQ_ID_WDA, &vos_msg)) { |
| WMA_LOGP("%s: Failed to post WDA_EXTSCAN_STATUS_IND msg", |
| __func__); |
| vos_mem_free(buf); |
| return -EINVAL; |
| } |
| WMA_LOGI("WDA_EXTSCAN_STATUS_IND posted"); |
| |
| return 0; |
| } |
| |
| /** |
| * wma_extscan_operations_ind_handler() - extscan operations handler |
| * @wma: WMA global handle |
| * @buf: command event data |
| * |
| * This function extracts the event data, fill in appropriate structures |
| * and invoke upper layer callback. |
| * |
| * Return: 0 on success, error number otherwise |
| */ |
| static int wma_extscan_operations_ind_handler(tp_wma_handle wma, uint8_t *buf) |
| { |
| tSirExtScanOnScanEventIndParams *oprn_ind, *evt_buf; |
| tpAniSirGlobal mac_ctx = (tpAniSirGlobal)vos_get_context( |
| VOS_MODULE_ID_PE, wma->vos_context); |
| if (!mac_ctx) { |
| WMA_LOGE("%s: Invalid mac_ctx", __func__); |
| return -EINVAL; |
| } |
| if (!mac_ctx->sme.pExtScanIndCb) { |
| WMA_LOGE("%s: Callback not registered", __func__); |
| return -EINVAL; |
| } |
| if (!buf) { |
| WMA_LOGE("%s: Invalid event buffer", __func__); |
| return -EINVAL; |
| } |
| |
| evt_buf = (tSirExtScanOnScanEventIndParams *)buf; |
| oprn_ind = vos_mem_malloc(sizeof(*oprn_ind)); |
| if (!oprn_ind) { |
| WMA_LOGE(FL("extscan memory allocation failed")); |
| return -EINVAL; |
| } |
| |
| vos_mem_zero(oprn_ind, sizeof(*oprn_ind)); |
| oprn_ind->requestId = evt_buf->requestId; |
| |
| switch (evt_buf->scanEventType) { |
| case WMI_EXTSCAN_BUCKET_COMPLETED_EVENT: |
| WMA_LOGD("%s: received WMI_EXTSCAN_BUCKET_COMPLETED_EVENT", |
| __func__); |
| oprn_ind->status = 0; |
| goto exit_handler; |
| case WMI_EXTSCAN_CYCLE_STARTED_EVENT: |
| WMA_LOGD("%s: received WMI_EXTSCAN_CYCLE_STARTED_EVENT", |
| __func__); |
| vos_wake_lock_timeout_acquire(&wma->extscan_wake_lock, |
| WMA_EXTSCAN_CYCLE_WAKE_LOCK_DURATION, |
| WIFI_POWER_EVENT_WAKELOCK_EXT_SCAN); |
| oprn_ind->scanEventType = WIFI_EXTSCAN_CYCLE_STARTED_EVENT; |
| oprn_ind->status = 0; |
| oprn_ind->buckets_scanned = evt_buf->buckets_scanned; |
| break; |
| case WMI_EXTSCAN_CYCLE_COMPLETED_EVENT: |
| WMA_LOGD("%s: received WMI_EXTSCAN_CYCLE_COMPLETED_EVENT", |
| __func__); |
| vos_wake_lock_release(&wma->extscan_wake_lock, |
| WIFI_POWER_EVENT_WAKELOCK_EXT_SCAN); |
| oprn_ind->scanEventType = WIFI_EXTSCAN_CYCLE_COMPLETED_EVENT; |
| oprn_ind->status = 0; |
| /* Set bucket scanned mask to zero on cycle complete */ |
| oprn_ind->buckets_scanned = 0; |
| break; |
| case WMI_EXTSCAN_BUCKET_STARTED_EVENT: |
| WMA_LOGD("%s: received WMI_EXTSCAN_BUCKET_STARTED_EVENT", |
| __func__); |
| oprn_ind->scanEventType = WIFI_EXTSCAN_BUCKET_STARTED_EVENT; |
| oprn_ind->status = 0; |
| goto exit_handler; |
| case WMI_EXTSCAN_THRESHOLD_NUM_SCANS: |
| WMA_LOGD("%s: received WMI_EXTSCAN_THRESHOLD_NUM_SCANS", |
| __func__); |
| oprn_ind->scanEventType = WIFI_EXTSCAN_THRESHOLD_NUM_SCANS; |
| oprn_ind->status = 0; |
| break; |
| case WMI_EXTSCAN_THRESHOLD_PERCENT: |
| WMA_LOGD("%s: received WMI_EXTSCAN_THRESHOLD_PERCENT", |
| __func__); |
| oprn_ind->scanEventType = WIFI_EXTSCAN_THRESHOLD_PERCENT; |
| oprn_ind->status = 0; |
| break; |
| default: |
| WMA_LOGE("%s: Unknown event %d from target", |
| __func__, evt_buf->scanEventType); |
| vos_mem_free(oprn_ind); |
| return -EINVAL; |
| } |
| mac_ctx->sme.pExtScanIndCb(mac_ctx->hHdd, |
| eSIR_EXTSCAN_SCAN_PROGRESS_EVENT_IND, |
| oprn_ind); |
| WMA_LOGD("%s: sending scan progress event to hdd", __func__); |
| |
| exit_handler: |
| vos_mem_free(oprn_ind); |
| return 0; |
| } |
| |
| /** |
| * wma_extscan_operations_event_handler() - extscan operations event handler |
| * @handle: WMA global handle |
| * @cmd_param_info: command event data |
| * @len: Length of @cmd_param_info |
| * |
| * Return: 0 on success, error number otherwise |
| */ |
| static int wma_extscan_operations_event_handler(void *handle, |
| uint8_t *cmd_param_info, uint32_t len) |
| { |
| WMI_EXTSCAN_OPERATION_EVENTID_param_tlvs *param_buf; |
| wmi_extscan_operation_event_fixed_param *event; |
| tSirExtScanOnScanEventIndParams *buf; |
| A_UINT32 cnt = 0; |
| int buf_len; |
| vos_msg_t vos_msg = {0}; |
| |
| param_buf = (WMI_EXTSCAN_OPERATION_EVENTID_param_tlvs *) |
| cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid extscan event", __func__); |
| return -EINVAL; |
| } |
| event = param_buf->fixed_param; |
| if (event->num_buckets > param_buf->num_bucket_id) { |
| WMA_LOGE("FW mesg num_buk %d more than TLV hdr %d", |
| event->num_buckets, |
| param_buf->num_bucket_id); |
| return -EINVAL; |
| } |
| buf_len = sizeof(*buf); |
| buf = vos_mem_malloc(buf_len); |
| if (!buf) { |
| WMA_LOGE("%s: extscan memory allocation failed", __func__); |
| return -ENOMEM; |
| } |
| vos_mem_zero(buf, buf_len); |
| |
| buf->requestId = event->request_id; |
| buf->scanEventType = event->event; |
| |
| if (event->event == WMI_EXTSCAN_CYCLE_STARTED_EVENT) { |
| for (cnt = 0; cnt < event->num_buckets; cnt++) |
| buf->buckets_scanned |= |
| (1 << param_buf->bucket_id[cnt]); |
| } |
| |
| WMA_LOGI(FL("num_buckets: %u request_id: %u scanEventType: %u buckets_scanned: %u"), |
| event->num_buckets, buf->requestId, |
| buf->scanEventType, buf->buckets_scanned); |
| |
| vos_msg.type = WDA_EXTSCAN_OPERATION_IND; |
| vos_msg.bodyptr = buf; |
| vos_msg.bodyval = 0; |
| |
| if (VOS_STATUS_SUCCESS != |
| vos_mq_post_message(VOS_MQ_ID_WDA, &vos_msg)) { |
| WMA_LOGP("%s: Failed to post WDA_EXTSCAN_OPERATION_IND msg", |
| __func__); |
| vos_mem_free(buf); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int wma_extscan_table_usage_event_handler (void *handle, |
| u_int8_t *cmd_param_info, u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle)handle; |
| WMI_EXTSCAN_TABLE_USAGE_EVENTID_param_tlvs *param_buf; |
| wmi_extscan_table_usage_event_fixed_param *event; |
| tSirExtScanResultsAvailableIndParams *tbl_usg_ind; |
| tpAniSirGlobal pMac = (tpAniSirGlobal)vos_get_context( |
| VOS_MODULE_ID_PE, wma->vos_context); |
| if (!pMac) { |
| WMA_LOGE("%s: Invalid pMac", __func__); |
| return -EINVAL; |
| } |
| if (!pMac->sme.pExtScanIndCb) { |
| WMA_LOGE("%s: Callback not registered", __func__); |
| return -EINVAL; |
| } |
| param_buf = (WMI_EXTSCAN_TABLE_USAGE_EVENTID_param_tlvs *) |
| cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid table usage event", __func__); |
| return -EINVAL; |
| } |
| event = param_buf->fixed_param; |
| tbl_usg_ind = vos_mem_malloc(sizeof(*tbl_usg_ind)); |
| if (!tbl_usg_ind) { |
| WMA_LOGE("%s: table usage allocation failed", __func__); |
| return -EINVAL; |
| } |
| tbl_usg_ind->requestId = event->request_id; |
| tbl_usg_ind->numResultsAvailable = event->entries_in_use; |
| |
| pMac->sme.pExtScanIndCb(pMac->hHdd, |
| eSIR_EXTSCAN_SCAN_RES_AVAILABLE_IND, |
| tbl_usg_ind); |
| WMA_LOGD("%s: sending scan_res available event to hdd", __func__); |
| vos_mem_free(tbl_usg_ind); |
| return 0; |
| } |
| |
| static int wma_extscan_capabilities_event_handler (void *handle, |
| u_int8_t *cmd_param_info, u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle)handle; |
| WMI_EXTSCAN_CAPABILITIES_EVENTID_param_tlvs *param_buf; |
| wmi_extscan_capabilities_event_fixed_param *event; |
| wmi_extscan_cache_capabilities *src_cache; |
| wmi_extscan_hotlist_monitor_capabilities *src_hotlist; |
| wmi_extscan_wlan_change_monitor_capabilities *src_change; |
| |
| struct ext_scan_capabilities_response *dest_capab; |
| tpAniSirGlobal pMac = (tpAniSirGlobal )vos_get_context( |
| VOS_MODULE_ID_PE, wma->vos_context); |
| if (!pMac) { |
| WMA_LOGE("%s: Invalid pMac", __func__); |
| return -EINVAL; |
| } |
| if (!pMac->sme.pExtScanIndCb) { |
| WMA_LOGE("%s: Callback not registered", __func__); |
| return -EINVAL; |
| } |
| param_buf = (WMI_EXTSCAN_CAPABILITIES_EVENTID_param_tlvs *) |
| cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid capabilities event", __func__); |
| return -EINVAL; |
| } |
| event = param_buf->fixed_param; |
| src_cache = param_buf->extscan_cache_capabilities; |
| src_hotlist = param_buf->hotlist_capabilities; |
| src_change = param_buf->wlan_change_capabilities; |
| |
| if (!src_cache || !src_hotlist || !src_change) { |
| WMA_LOGE("%s: Invalid capabilities list", __func__); |
| return -EINVAL; |
| } |
| dest_capab = vos_mem_malloc(sizeof(*dest_capab)); |
| if (!dest_capab) { |
| WMA_LOGE("%s: Allocation failed for capabilities buffer", |
| __func__); |
| return -EINVAL; |
| } |
| dest_capab->requestId = event->request_id; |
| dest_capab->max_scan_buckets = src_cache->max_buckets; |
| dest_capab->max_scan_cache_size = src_cache->scan_cache_entry_size; |
| dest_capab->max_ap_cache_per_scan = src_cache->max_bssid_per_scan; |
| dest_capab->max_scan_reporting_threshold = |
| src_cache->max_table_usage_threshold; |
| |
| dest_capab->max_hotlist_bssids = src_hotlist->max_hotlist_entries; |
| dest_capab->max_rssi_sample_size = |
| src_change->max_rssi_averaging_samples; |
| dest_capab->max_bssid_history_entries = |
| src_change->max_rssi_history_entries; |
| dest_capab->max_significant_wifi_change_aps = |
| src_change->max_wlan_change_entries; |
| dest_capab->max_hotlist_ssids = |
| event->num_extscan_hotlist_ssid; |
| dest_capab->max_number_epno_networks = |
| event->num_epno_networks; |
| dest_capab->max_number_epno_networks_by_ssid = |
| event->num_epno_networks; |
| dest_capab->max_number_of_white_listed_ssid = |
| event->num_roam_ssid_whitelist; |
| dest_capab->max_number_of_black_listed_bssid = |
| event->num_roam_bssid_blacklist; |
| dest_capab->status = 0; |
| |
| WMA_LOGD("%s: request_id: %u status: %d", |
| __func__, dest_capab->requestId, dest_capab->status); |
| |
| WMA_LOGD("%s: Capabilities: max_scan_buckets: %d," |
| "max_hotlist_bssids: %d, max_scan_cache_size: %d," |
| "max_ap_cache_per_scan: %d, max_scan_reporting_threshold: %d," |
| "max_rssi_sample_size: %d, max_bssid_history_entries: %d," |
| "max_significant_wifi_change_aps: %d", |
| __func__, dest_capab->max_scan_buckets, |
| dest_capab->max_hotlist_bssids, |
| dest_capab->max_scan_cache_size, |
| dest_capab->max_ap_cache_per_scan, |
| dest_capab->max_scan_reporting_threshold, |
| dest_capab->max_rssi_sample_size, |
| dest_capab->max_bssid_history_entries, |
| dest_capab->max_significant_wifi_change_aps); |
| WMA_LOGD("%s: Capabilities: max_hotlist_ssids: %d," |
| "max_number_epno_networks: %d, max_number_epno_networks_by_ssid: %d," |
| "max_number_of_white_listed_ssid: %d," |
| "max_number_of_black_listed_bssid: %d ", |
| __func__, dest_capab->max_hotlist_ssids, |
| dest_capab->max_number_epno_networks, |
| dest_capab->max_number_epno_networks_by_ssid, |
| dest_capab->max_number_of_white_listed_ssid, |
| dest_capab->max_number_of_black_listed_bssid); |
| |
| pMac->sme.pExtScanIndCb(pMac->hHdd, |
| eSIR_EXTSCAN_GET_CAPABILITIES_IND, |
| dest_capab); |
| WMA_LOGD("%s: sending capabilities event to hdd", __func__); |
| vos_mem_free(dest_capab); |
| return 0; |
| } |
| |
| static int wma_extscan_hotlist_match_event_handler(void *handle, |
| u_int8_t *cmd_param_info, u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_EXTSCAN_HOTLIST_MATCH_EVENTID_param_tlvs *param_buf; |
| wmi_extscan_hotlist_match_event_fixed_param *event; |
| struct extscan_hotlist_match *dest_hotlist; |
| tSirWifiScanResult *dest_ap; |
| wmi_extscan_wlan_descriptor *src_hotlist; |
| uint32_t numap; |
| int j, ap_found = 0; |
| |
| tpAniSirGlobal pMac = (tpAniSirGlobal )vos_get_context( |
| VOS_MODULE_ID_PE, wma->vos_context); |
| if (!pMac) { |
| WMA_LOGE("%s: Invalid pMac", __func__); |
| return -EINVAL; |
| } |
| if (!pMac->sme.pExtScanIndCb) { |
| WMA_LOGE("%s: Callback not registered", __func__); |
| return -EINVAL; |
| } |
| param_buf = (WMI_EXTSCAN_HOTLIST_MATCH_EVENTID_param_tlvs *) |
| cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid hotlist match event", __func__); |
| return -EINVAL; |
| } |
| event = param_buf->fixed_param; |
| src_hotlist = param_buf->hotlist_match; |
| numap = event->total_entries; |
| |
| if (!src_hotlist || !numap) { |
| WMA_LOGE("%s: Hotlist AP's list invalid", __func__); |
| return -EINVAL; |
| } |
| if (numap > WMA_EXTSCAN_MAX_HOTLIST_ENTRIES) { |
| WMA_LOGE("%s: Total Entries %u greater than max", |
| __func__, numap); |
| numap = WMA_EXTSCAN_MAX_HOTLIST_ENTRIES; |
| } |
| dest_hotlist = vos_mem_malloc(sizeof(*dest_hotlist) + |
| sizeof(*dest_ap) * numap); |
| if (!dest_hotlist) { |
| WMA_LOGE("%s: Allocation failed for hotlist buffer", __func__); |
| return -EINVAL; |
| } |
| dest_ap = &dest_hotlist->ap[0]; |
| dest_hotlist->numOfAps = event->total_entries; |
| dest_hotlist->requestId = event->config_request_id; |
| if (event->first_entry_index + |
| event->num_entries_in_page < event->total_entries) |
| dest_hotlist->moreData = 1; |
| else |
| dest_hotlist->moreData = 0; |
| |
| WMA_LOGD("%s: Hotlist match: requestId: %u," |
| "numOfAps: %d", __func__, |
| dest_hotlist->requestId, dest_hotlist->numOfAps); |
| |
| /* |
| * Currently firmware sends only one bss information in-case |
| * of both hotlist ap found and lost. |
| */ |
| for (j = 0; j < numap; j++) { |
| dest_ap->rssi = 0; |
| dest_ap->channel = src_hotlist->channel; |
| dest_ap->ts = src_hotlist->tstamp; |
| ap_found = src_hotlist->flags & WMI_HOTLIST_FLAG_PRESENCE; |
| dest_ap->rtt = src_hotlist->rtt; |
| dest_ap->rtt_sd = src_hotlist->rtt_sd; |
| dest_ap->beaconPeriod = src_hotlist->beacon_interval; |
| dest_ap->capability = src_hotlist->capabilities; |
| dest_ap->ieLength = src_hotlist-> ie_length; |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&src_hotlist->bssid, |
| dest_ap->bssid); |
| vos_mem_copy(dest_ap->ssid, src_hotlist->ssid.ssid, |
| src_hotlist->ssid.ssid_len); |
| dest_ap->ssid[src_hotlist->ssid.ssid_len] = '\0'; |
| dest_ap++; |
| src_hotlist++; |
| } |
| dest_hotlist->ap_found = ap_found; |
| pMac->sme.pExtScanIndCb(pMac->hHdd, |
| eSIR_EXTSCAN_HOTLIST_MATCH_IND, |
| dest_hotlist); |
| WMA_LOGD("%s: sending hotlist match event to hdd", __func__); |
| vos_mem_free(dest_hotlist); |
| return 0; |
| } |
| |
| /** wma_extscan_find_unique_scan_ids() - find unique scan ids |
| * @cmd_param_info: event data. |
| * |
| * This utility function parses the input bss table of information |
| * and find the unique number of scan ids |
| * |
| * Return: 0 on success; error number otherwise |
| */ |
| static int wma_extscan_find_unique_scan_ids(const u_int8_t *cmd_param_info) |
| { |
| WMI_EXTSCAN_CACHED_RESULTS_EVENTID_param_tlvs *param_buf; |
| wmi_extscan_cached_results_event_fixed_param *event; |
| wmi_extscan_wlan_descriptor *src_hotlist; |
| wmi_extscan_rssi_info *src_rssi; |
| int prev_scan_id, scan_ids_cnt, i; |
| |
| param_buf = (WMI_EXTSCAN_CACHED_RESULTS_EVENTID_param_tlvs *) |
| cmd_param_info; |
| event = param_buf->fixed_param; |
| src_hotlist = param_buf->bssid_list; |
| src_rssi = param_buf->rssi_list; |
| |
| /* Find the unique number of scan_id's for grouping */ |
| prev_scan_id = src_rssi->scan_cycle_id; |
| scan_ids_cnt = 1; |
| for (i = 1; i < event->num_entries_in_page; i++) { |
| src_rssi++; |
| |
| if (prev_scan_id != src_rssi->scan_cycle_id) { |
| scan_ids_cnt++; |
| prev_scan_id = src_rssi->scan_cycle_id; |
| } |
| } |
| |
| return scan_ids_cnt; |
| } |
| |
| /** wma_fill_num_results_per_scan_id() - fill number of bss per scan id |
| * @cmd_param_info: event data. |
| * @scan_id_group: pointer to scan id group. |
| * |
| * This utility function parses the input bss table of information |
| * and finds how many bss are there per unique scan id. |
| * |
| * Return: 0 on success; error number otherwise |
| */ |
| static int wma_fill_num_results_per_scan_id(const u_int8_t *cmd_param_info, |
| struct extscan_cached_scan_result *scan_id_group) |
| { |
| WMI_EXTSCAN_CACHED_RESULTS_EVENTID_param_tlvs *param_buf; |
| wmi_extscan_cached_results_event_fixed_param *event; |
| wmi_extscan_wlan_descriptor *src_hotlist; |
| wmi_extscan_rssi_info *src_rssi; |
| struct extscan_cached_scan_result *t_scan_id_grp; |
| int i, prev_scan_id; |
| |
| param_buf = (WMI_EXTSCAN_CACHED_RESULTS_EVENTID_param_tlvs *) |
| cmd_param_info; |
| event = param_buf->fixed_param; |
| src_hotlist = param_buf->bssid_list; |
| src_rssi = param_buf->rssi_list; |
| t_scan_id_grp = scan_id_group; |
| |
| prev_scan_id = src_rssi->scan_cycle_id; |
| |
| t_scan_id_grp->scan_id = src_rssi->scan_cycle_id; |
| t_scan_id_grp->flags = src_rssi->flags; |
| t_scan_id_grp->buckets_scanned = src_rssi->buckets_scanned; |
| t_scan_id_grp->num_results = 1; |
| for (i = 1; i < event->num_entries_in_page; i++) { |
| src_rssi++; |
| if (prev_scan_id == src_rssi->scan_cycle_id) { |
| t_scan_id_grp->num_results++; |
| } else { |
| t_scan_id_grp++; |
| prev_scan_id = t_scan_id_grp->scan_id = |
| src_rssi->scan_cycle_id; |
| t_scan_id_grp->flags = src_rssi->flags; |
| t_scan_id_grp->buckets_scanned = |
| src_rssi->buckets_scanned; |
| t_scan_id_grp->num_results = 1; |
| } |
| } |
| return 0; |
| } |
| |
| /** wma_group_num_bss_to_scan_id() - group bss to scan id table |
| * @cmd_param_info: event data. |
| * @cached_result: pointer to cached table. |
| * |
| * This function reads the bss information from the format |
| * ------------------------------------------------------------------------ |
| * | bss info {rssi, channel, ssid, bssid, timestamp} | scan id_1 | flags | |
| * | bss info {rssi, channel, ssid, bssid, timestamp} | scan id_2 | flags | |
| * ........................................................................ |
| * | bss info {rssi, channel, ssid, bssid, timestamp} | scan id_N | flags | |
| * ------------------------------------------------------------------------ |
| * |
| * and converts it into the below format and store it |
| * |
| * ------------------------------------------------------------------------ |
| * | scan id_1 | -> bss info_1 -> bss info_2 -> .... bss info_M1 |
| * | scan id_2 | -> bss info_1 -> bss info_2 -> .... bss info_M2 |
| * ...................... |
| * | scan id_N | -> bss info_1 -> bss info_2 -> .... bss info_Mn |
| * ------------------------------------------------------------------------ |
| * |
| * Return: 0 on success; error number otherwise |
| */ |
| static int wma_group_num_bss_to_scan_id(const u_int8_t *cmd_param_info, |
| struct extscan_cached_scan_results *cached_result) |
| { |
| WMI_EXTSCAN_CACHED_RESULTS_EVENTID_param_tlvs *param_buf; |
| wmi_extscan_cached_results_event_fixed_param *event; |
| wmi_extscan_wlan_descriptor *src_hotlist; |
| wmi_extscan_rssi_info *src_rssi; |
| struct extscan_cached_scan_results *t_cached_result; |
| struct extscan_cached_scan_result *t_scan_id_grp; |
| int i, j; |
| tSirWifiScanResult *ap; |
| |
| param_buf = (WMI_EXTSCAN_CACHED_RESULTS_EVENTID_param_tlvs *) |
| cmd_param_info; |
| event = param_buf->fixed_param; |
| src_hotlist = param_buf->bssid_list; |
| src_rssi = param_buf->rssi_list; |
| t_cached_result = cached_result; |
| t_scan_id_grp = &t_cached_result->result[0]; |
| |
| WMA_LOGD("%s: num_scan_ids:%d", __func__, |
| t_cached_result->num_scan_ids); |
| for (i = 0; i < t_cached_result->num_scan_ids; i++) { |
| WMA_LOGD("%s: num_results:%d", __func__, |
| t_scan_id_grp->num_results); |
| t_scan_id_grp->ap = vos_mem_malloc(t_scan_id_grp->num_results * |
| sizeof(*ap)); |
| if (!t_scan_id_grp->ap) { |
| WMA_LOGD("%s: vos_mem_malloc failed", __func__); |
| return -ENOMEM; |
| } |
| |
| ap = &t_scan_id_grp->ap[0]; |
| for (j = 0; j < t_scan_id_grp->num_results; j++) { |
| ap->channel = src_hotlist->channel; |
| ap->ts = WMA_MSEC_TO_USEC(src_rssi->tstamp); |
| ap->rtt = src_hotlist->rtt; |
| ap->rtt_sd = src_hotlist->rtt_sd; |
| ap->beaconPeriod = src_hotlist->beacon_interval; |
| ap->capability = src_hotlist->capabilities; |
| ap->ieLength = src_hotlist->ie_length; |
| /* Firmware already applied noise floor adjustment and |
| * due to WMI interface "UINT32 rssi", host driver |
| * receives a positive value, hence convert to |
| * signed char to get the absolute rssi. |
| */ |
| ap->rssi = (signed char) src_rssi->rssi; |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&src_hotlist->bssid, |
| ap->bssid); |
| |
| vos_mem_copy(ap->ssid, src_hotlist->ssid.ssid, |
| src_hotlist->ssid.ssid_len); |
| ap->ssid[src_hotlist->ssid.ssid_len] = '\0'; |
| ap++; |
| src_rssi++; |
| src_hotlist++; |
| } |
| t_scan_id_grp++; |
| } |
| return 0; |
| } |
| |
| static int wma_extscan_cached_results_event_handler(void *handle, |
| u_int8_t *cmd_param_info, u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_EXTSCAN_CACHED_RESULTS_EVENTID_param_tlvs *param_buf; |
| wmi_extscan_cached_results_event_fixed_param *event; |
| struct extscan_cached_scan_results *dest_cachelist; |
| struct extscan_cached_scan_result *dest_result; |
| struct extscan_cached_scan_results empty_cachelist; |
| wmi_extscan_wlan_descriptor *src_hotlist; |
| wmi_extscan_rssi_info *src_rssi; |
| int numap, i, moredata, scan_ids_cnt; |
| int buf_len; |
| u_int32_t total_len; |
| bool excess_data = false; |
| |
| tpAniSirGlobal pMac = (tpAniSirGlobal )vos_get_context( |
| VOS_MODULE_ID_PE, wma->vos_context); |
| if (!pMac) { |
| WMA_LOGE("%s: Invalid pMac", __func__); |
| return -EINVAL; |
| } |
| if (!pMac->sme.pExtScanIndCb) { |
| WMA_LOGE("%s: Callback not registered", __func__); |
| return -EINVAL; |
| } |
| param_buf = (WMI_EXTSCAN_CACHED_RESULTS_EVENTID_param_tlvs *) |
| cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid cached results event", __func__); |
| return -EINVAL; |
| } |
| |
| event = param_buf->fixed_param; |
| src_hotlist = param_buf->bssid_list; |
| src_rssi = param_buf->rssi_list; |
| numap = event->num_entries_in_page; |
| WMA_LOGI("Total_entries: %u first_entry_index: %u num_entries_in_page: %u", |
| event->total_entries, event->first_entry_index, numap); |
| if (!src_hotlist || !src_rssi || !numap) { |
| WMA_LOGW("%s: Cached results empty, send 0 results", __func__); |
| goto noresults; |
| } |
| |
| if (event->first_entry_index + |
| event->num_entries_in_page < event->total_entries) |
| moredata = 1; |
| else |
| moredata = 0; |
| |
| dest_cachelist = vos_mem_malloc(sizeof(*dest_cachelist)); |
| if (!dest_cachelist) { |
| WMA_LOGE("%s: vos_mem_malloc failed", __func__); |
| return -ENOMEM; |
| } |
| vos_mem_zero(dest_cachelist, sizeof(*dest_cachelist)); |
| dest_cachelist->request_id = event->request_id; |
| dest_cachelist->more_data = moredata; |
| |
| scan_ids_cnt = wma_extscan_find_unique_scan_ids(cmd_param_info); |
| WMA_LOGI("scan_ids_cnt %d", scan_ids_cnt); |
| dest_cachelist->num_scan_ids = scan_ids_cnt; |
| |
| if (event->num_entries_in_page > |
| (WMA_SVC_MSG_MAX_SIZE - sizeof(*event))/sizeof(*src_hotlist)) { |
| WMA_LOGE("%s:excess num_entries_in_page %d in WMI event", |
| __func__, event->num_entries_in_page); |
| vos_mem_free(dest_cachelist); |
| VOS_ASSERT(0); |
| return -EINVAL; |
| } else { |
| total_len = sizeof(*event) + |
| (event->num_entries_in_page * sizeof(*src_hotlist)); |
| } |
| for (i = 0; i < event->num_entries_in_page; i++) { |
| if (src_hotlist[i].ie_length > WMA_SVC_MSG_MAX_SIZE - |
| total_len) { |
| excess_data = true; |
| break; |
| } else { |
| total_len += src_hotlist[i].ie_length; |
| WMA_LOGD("total len IE: %d", total_len); |
| } |
| if (src_hotlist[i].number_rssi_samples > |
| (WMA_SVC_MSG_MAX_SIZE - total_len)/sizeof(*src_rssi)) { |
| excess_data = true; |
| break; |
| } else { |
| total_len += (src_hotlist[i].number_rssi_samples * |
| sizeof(*src_rssi)); |
| WMA_LOGD("total len RSSI samples: %d", total_len); |
| } |
| } |
| if (excess_data) { |
| WMA_LOGE("%s:excess data in WMI event", __func__); |
| vos_mem_free(dest_cachelist); |
| VOS_ASSERT(0); |
| return -EINVAL; |
| } |
| |
| buf_len = sizeof(*dest_result) * scan_ids_cnt; |
| dest_cachelist->result = vos_mem_malloc(buf_len); |
| if (!dest_cachelist->result) { |
| WMA_LOGE("%s: vos_mem_malloc failed", __func__); |
| vos_mem_free(dest_cachelist); |
| return -ENOMEM; |
| } |
| |
| dest_result = dest_cachelist->result; |
| wma_fill_num_results_per_scan_id(cmd_param_info, dest_result); |
| wma_group_num_bss_to_scan_id(cmd_param_info, dest_cachelist); |
| |
| pMac->sme.pExtScanIndCb(pMac->hHdd, |
| eSIR_EXTSCAN_CACHED_RESULTS_IND, |
| dest_cachelist); |
| |
| dest_result = dest_cachelist->result; |
| for (i = 0; i < dest_cachelist->num_scan_ids; i++) { |
| vos_mem_free(dest_result->ap); |
| dest_result++; |
| } |
| vos_mem_free(dest_cachelist->result); |
| vos_mem_free(dest_cachelist); |
| return 0; |
| |
| noresults: |
| empty_cachelist.request_id = event->request_id; |
| empty_cachelist.more_data = 0; |
| empty_cachelist.num_scan_ids = 0; |
| |
| pMac->sme.pExtScanIndCb(pMac->hHdd, |
| eSIR_EXTSCAN_CACHED_RESULTS_IND, |
| &empty_cachelist); |
| return 0; |
| } |
| |
| static int wma_extscan_change_results_event_handler(void *handle, |
| u_int8_t *cmd_param_info, u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_EXTSCAN_WLAN_CHANGE_RESULTS_EVENTID_param_tlvs *param_buf; |
| wmi_extscan_wlan_change_results_event_fixed_param *event; |
| tSirWifiSignificantChangeEvent *dest_chglist; |
| tSirWifiSignificantChange *dest_ap; |
| wmi_extscan_wlan_change_result_bssid *src_chglist; |
| |
| int numap; |
| int i, k; |
| u_int8_t *src_rssi; |
| int count = 0; |
| int moredata; |
| int rssi_num = 0; |
| u_int32_t buf_len; |
| bool excess_data = false; |
| tpAniSirGlobal pMac = (tpAniSirGlobal )vos_get_context( |
| VOS_MODULE_ID_PE, wma->vos_context); |
| if (!pMac) { |
| WMA_LOGE("%s: Invalid pMac", __func__); |
| return -EINVAL; |
| } |
| if (!pMac->sme.pExtScanIndCb) { |
| WMA_LOGE("%s: Callback not registered", __func__); |
| return -EINVAL; |
| } |
| param_buf = (WMI_EXTSCAN_WLAN_CHANGE_RESULTS_EVENTID_param_tlvs *) |
| cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid change monitor event", __func__); |
| return -EINVAL; |
| } |
| event = param_buf->fixed_param; |
| src_chglist = param_buf->bssid_signal_descriptor_list; |
| src_rssi = param_buf->rssi_list; |
| numap = event->num_entries_in_page; |
| |
| if (!src_chglist || !numap) { |
| WMA_LOGE("%s: Results invalid", __func__); |
| return -EINVAL; |
| } |
| for (i = 0; i < numap; i++) { |
| rssi_num += src_chglist->num_rssi_samples; |
| } |
| if (event->first_entry_index + |
| event->num_entries_in_page < event->total_entries) |
| moredata = 1; |
| else |
| moredata = 0; |
| |
| do { |
| if (event->num_entries_in_page > |
| (WMA_SVC_MSG_MAX_SIZE - sizeof(*event))/ |
| sizeof(*src_chglist)) { |
| excess_data = true; |
| break; |
| } else { |
| buf_len = sizeof(*event) + |
| (event->num_entries_in_page * |
| sizeof(*src_chglist)); |
| } |
| if (rssi_num > |
| (WMA_SVC_MSG_MAX_SIZE - buf_len)/sizeof(int32_t)) { |
| excess_data = true; |
| break; |
| } |
| } while (0); |
| |
| if (excess_data) { |
| WMA_LOGE("buffer len exceeds WMI payload,numap:%d, rssi_num:%d", |
| numap, rssi_num); |
| VOS_ASSERT(0); |
| return -EINVAL; |
| } |
| dest_chglist = vos_mem_malloc(sizeof(*dest_chglist) + |
| sizeof(*dest_ap) * numap + |
| sizeof(tANI_S32) * rssi_num); |
| if (!dest_chglist) { |
| WMA_LOGE("%s: vos_mem_malloc failed", __func__); |
| return -EINVAL; |
| } |
| dest_ap = &dest_chglist->ap[0]; |
| for (i = 0; i < numap; i++) { |
| dest_ap->channel = src_chglist->channel; |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&src_chglist->bssid, |
| dest_ap->bssid); |
| dest_ap->numOfRssi = |
| src_chglist->num_rssi_samples; |
| if (dest_ap->numOfRssi) { |
| for (k = 0; k < dest_ap->numOfRssi; k++) { |
| dest_ap->rssi[k] = WMA_TGT_NOISE_FLOOR_DBM + |
| src_rssi[count++]; |
| } |
| } |
| dest_ap += dest_ap->numOfRssi * sizeof(tANI_S32); |
| src_chglist++; |
| } |
| dest_chglist->requestId = event->request_id; |
| dest_chglist->moreData = moredata; |
| dest_chglist->numResults = event->total_entries; |
| |
| pMac->sme.pExtScanIndCb(pMac->hHdd, |
| eSIR_EXTSCAN_SIGNIFICANT_WIFI_CHANGE_RESULTS_IND, |
| dest_chglist); |
| WMA_LOGD("%s: sending change monitor results", __func__); |
| vos_mem_free(dest_chglist); |
| return 0; |
| } |
| |
| /** |
| * wma_passpoint_match_event_handler() - passpoint match found event handler |
| * @handle: WMA handle |
| * @cmd_param_info: event data |
| * @len: event data length |
| * |
| * This is the passpoint match found event handler; it reads event data from |
| * @cmd_param_info and fill in the destination buffer and sends indication |
| * up layer. |
| * |
| * Return: 0 on success; error number otherwise |
| */ |
| static int wma_passpoint_match_event_handler(void *handle, |
| uint8_t *cmd_param_info, |
| uint32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_PASSPOINT_MATCH_EVENTID_param_tlvs *param_buf; |
| wmi_passpoint_event_hdr *event; |
| struct wifi_passpoint_match *dest_match; |
| tSirWifiScanResult *dest_ap; |
| uint8_t *buf_ptr; |
| |
| tpAniSirGlobal pMac = (tpAniSirGlobal )vos_get_context( |
| VOS_MODULE_ID_PE, wma->vos_context); |
| if (!pMac) { |
| WMA_LOGE("%s: Invalid pMac", __func__); |
| return -EINVAL; |
| } |
| if (!pMac->sme.pExtScanIndCb) { |
| WMA_LOGE("%s: Callback not registered", __func__); |
| return -EINVAL; |
| } |
| param_buf = (WMI_PASSPOINT_MATCH_EVENTID_param_tlvs *) cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid passpoint match event", __func__); |
| return -EINVAL; |
| } |
| event = param_buf->fixed_param; |
| buf_ptr = (uint8_t *)param_buf->fixed_param; |
| |
| /* |
| * All the below lengths are UINT32 and summing up and checking |
| * against a constant should not be an issue. |
| */ |
| if ((sizeof(*event) + event->ie_length + event->anqp_length) > |
| WMA_SVC_MSG_MAX_SIZE) { |
| WMA_LOGE("IE Length: %d or ANQP Length: %d is huge", |
| event->ie_length, event->anqp_length); |
| VOS_ASSERT(0); |
| return -EINVAL; |
| } |
| dest_match = vos_mem_malloc(sizeof(*dest_match) + |
| event->ie_length + event->anqp_length); |
| if (!dest_match) { |
| WMA_LOGE("%s: vos_mem_malloc failed", __func__); |
| return -EINVAL; |
| } |
| dest_ap = &dest_match->ap; |
| dest_match->request_id = 0; |
| dest_match->id = event->id; |
| dest_match->anqp_len = event->anqp_length; |
| WMA_LOGI("%s: passpoint match: id: %u anqp length %u", __func__, |
| dest_match->id, dest_match->anqp_len); |
| |
| dest_ap->channel = event->channel_mhz; |
| dest_ap->ts = event->timestamp; |
| dest_ap->rtt = event->rtt; |
| dest_ap->rssi = event->rssi; |
| dest_ap->rtt_sd = event->rtt_sd; |
| dest_ap->beaconPeriod = event->beacon_period; |
| dest_ap->capability = event->capability; |
| dest_ap->ieLength = event->ie_length; |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&event->bssid, dest_ap->bssid); |
| vos_mem_copy(dest_ap->ssid, event->ssid.ssid, |
| event->ssid.ssid_len); |
| dest_ap->ssid[event->ssid.ssid_len] = '\0'; |
| vos_mem_copy(dest_ap->ieData, buf_ptr + sizeof(*event) + |
| WMI_TLV_HDR_SIZE, dest_ap->ieLength); |
| vos_mem_copy(dest_match->anqp, buf_ptr + sizeof(*event) + |
| WMI_TLV_HDR_SIZE + dest_ap->ieLength, |
| dest_match->anqp_len); |
| |
| pMac->sme.pExtScanIndCb(pMac->hHdd, |
| eSIR_PASSPOINT_NETWORK_FOUND_IND, |
| dest_match); |
| WMA_LOGD("%s: sending passpoint match event to hdd", __func__); |
| vos_mem_free(dest_match); |
| return 0; |
| } |
| |
| #endif |
| |
| #ifdef WLAN_FEATURE_LINK_LAYER_STATS |
| static int wma_unified_link_iface_stats_event_handler(void *handle, |
| u_int8_t *cmd_param_info, u_int32_t len) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| WMI_IFACE_LINK_STATS_EVENTID_param_tlvs *param_tlvs; |
| wmi_iface_link_stats_event_fixed_param *fixed_param; |
| wmi_iface_link_stats *link_stats; |
| wmi_wmm_ac_stats *ac_stats; |
| tSirLLStatsResults *link_stats_results; |
| u_int8_t *results, *t_link_stats, *t_ac_stats; |
| u_int32_t next_res_offset, next_ac_offset, count; |
| u_int32_t roaming_offset , roaming_size; |
| size_t link_stats_size, ac_stats_size, iface_info_size; |
| size_t link_stats_results_size; |
| |
| tpAniSirGlobal pMac = (tpAniSirGlobal )vos_get_context(VOS_MODULE_ID_PE, |
| wma_handle->vos_context); |
| |
| if (!pMac) { |
| WMA_LOGD("%s: NULL pMac ptr. Exiting", __func__); |
| return -EINVAL; |
| } |
| |
| if (!pMac->sme.pLinkLayerStatsIndCallback) { |
| WMA_LOGD("%s: HDD callback is null", __func__); |
| return -EINVAL; |
| } |
| |
| param_tlvs = (WMI_IFACE_LINK_STATS_EVENTID_param_tlvs *)cmd_param_info; |
| if (!param_tlvs) { |
| WMA_LOGA("%s: Invalid stats event", __func__); |
| return -EINVAL; |
| } |
| |
| /* |
| * cmd_param_info contains |
| * wmi_iface_link_stats_event_fixed_param fixed_param; |
| * wmi_iface_link_stats iface_link_stats; |
| * iface_link_stats->num_ac * size of(struct wmi_wmm_ac_stats) |
| */ |
| fixed_param = param_tlvs->fixed_param; |
| link_stats = param_tlvs->iface_link_stats; |
| ac_stats = param_tlvs->ac; |
| |
| if (!fixed_param || !link_stats || (link_stats->num_ac && !ac_stats)) { |
| WMA_LOGA("%s: Invalid param_tlvs for Iface Stats", __func__); |
| return -EINVAL; |
| } |
| |
| link_stats_size = sizeof(tSirWifiIfaceStat); |
| iface_info_size = sizeof(tSirWifiInterfaceInfo); |
| ac_stats_size = sizeof(tSirWifiWmmAcStat); |
| link_stats_results_size = sizeof(*link_stats_results) + |
| link_stats_size; |
| |
| link_stats_results = vos_mem_malloc(link_stats_results_size); |
| if (!link_stats_results) { |
| WMA_LOGD("%s: could not allocate mem for stats results-len %zu", |
| __func__, link_stats_results_size); |
| return -ENOMEM; |
| } |
| |
| vos_mem_zero(link_stats_results, link_stats_results_size); |
| |
| link_stats_results->paramId = WMI_LINK_STATS_IFACE; |
| link_stats_results->rspId = fixed_param->request_id; |
| link_stats_results->ifaceId = fixed_param->vdev_id; |
| link_stats_results->num_peers = link_stats->num_peers; |
| link_stats_results->peer_event_number = 0; |
| link_stats_results->moreResultToFollow = 0; |
| |
| results = (u_int8_t *)link_stats_results->results; |
| t_link_stats = (u_int8_t *)link_stats; |
| t_ac_stats = (u_int8_t *)ac_stats; |
| |
| /* Copy roaming state */ |
| roaming_offset = offsetof(tSirWifiInterfaceInfo, roaming); |
| roaming_size = member_size(tSirWifiInterfaceInfo, roaming); |
| |
| vos_mem_copy(results + roaming_offset, &link_stats->roam_state, |
| roaming_size); |
| |
| vos_mem_copy(results + iface_info_size, |
| t_link_stats + WMI_TLV_HDR_SIZE, |
| link_stats_size - iface_info_size - WIFI_AC_MAX * ac_stats_size); |
| |
| next_res_offset = link_stats_size - WIFI_AC_MAX * ac_stats_size; |
| next_ac_offset = WMI_TLV_HDR_SIZE; |
| |
| for (count = 0; count < link_stats->num_ac; count++) { |
| ac_stats++; |
| |
| vos_mem_copy(results + next_res_offset, |
| t_ac_stats + next_ac_offset, |
| ac_stats_size); |
| next_res_offset += ac_stats_size; |
| next_ac_offset += sizeof(*ac_stats); |
| } |
| |
| /* call hdd callback with Link Layer Statistics |
| * vdev_id/ifacId in link_stats_results will be |
| * used to retrieve the correct HDD context |
| */ |
| pMac->sme.pLinkLayerStatsIndCallback(pMac->hHdd, |
| WDA_LINK_LAYER_STATS_RESULTS_RSP, |
| link_stats_results); |
| vos_mem_free(link_stats_results); |
| |
| return 0; |
| } |
| |
| static int wma_unified_link_peer_stats_event_handler(void *handle, |
| u_int8_t *cmd_param_info, u_int32_t len) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| WMI_PEER_LINK_STATS_EVENTID_param_tlvs *param_tlvs; |
| wmi_peer_stats_event_fixed_param *fixed_param; |
| wmi_peer_link_stats *peer_stats, *temp_peer_stats; |
| wmi_rate_stats *rate_stats; |
| tSirLLStatsResults *link_stats_results; |
| u_int8_t *results, *t_peer_stats, *t_rate_stats; |
| u_int32_t count, rate_cnt; |
| uint32_t total_num_rates = 0; |
| u_int32_t next_res_offset, next_peer_offset, next_rate_offset; |
| size_t peer_info_size, peer_stats_size, rate_stats_size; |
| size_t link_stats_results_size; |
| bool excess_data = false; |
| u_int32_t buf_len; |
| |
| tpAniSirGlobal pMac = (tpAniSirGlobal )vos_get_context(VOS_MODULE_ID_PE, |
| wma_handle->vos_context); |
| |
| if (!pMac) { |
| WMA_LOGD("%s: NULL pMac ptr. Exiting", __func__); |
| return -EINVAL; |
| } |
| |
| if (!pMac->sme.pLinkLayerStatsIndCallback) { |
| WMA_LOGD("%s: HDD callback is null", __func__); |
| return -EINVAL; |
| } |
| |
| param_tlvs = (WMI_PEER_LINK_STATS_EVENTID_param_tlvs *)cmd_param_info; |
| if (!param_tlvs) { |
| WMA_LOGA("%s: Invalid stats event", __func__); |
| return -EINVAL; |
| } |
| /* |
| * cmd_param_info contains |
| * wmi_peer_stats_event_fixed_param fixed_param; |
| * num_peers * size of(struct wmi_peer_link_stats) |
| * total_num_rates * size of(struct wmi_rate_stats) |
| * total_num_rates is the sum of the rates of all the peers. |
| */ |
| fixed_param = param_tlvs->fixed_param; |
| peer_stats = param_tlvs->peer_stats; |
| rate_stats = param_tlvs->peer_rate_stats; |
| |
| if (!fixed_param || !peer_stats || |
| (peer_stats->num_rates && !rate_stats)) { |
| WMA_LOGA("%s: Invalid param_tlvs for Peer Stats", __func__); |
| return -EINVAL; |
| } |
| |
| do { |
| if (fixed_param->num_peers > |
| WMA_SVC_MSG_MAX_SIZE/sizeof(wmi_peer_link_stats)) { |
| excess_data = true; |
| break; |
| } else { |
| buf_len = fixed_param->num_peers * |
| sizeof(wmi_peer_link_stats); |
| } |
| temp_peer_stats = (wmi_peer_link_stats *) peer_stats; |
| for (count = 0; count < fixed_param->num_peers; count++) { |
| if (temp_peer_stats->num_rates > |
| WMA_SVC_MSG_MAX_SIZE / sizeof(wmi_rate_stats)) { |
| excess_data = true; |
| break; |
| } else { |
| total_num_rates += temp_peer_stats->num_rates; |
| if (total_num_rates > |
| WMA_SVC_MSG_MAX_SIZE / |
| sizeof(wmi_rate_stats)) { |
| excess_data = true; |
| break; |
| } |
| buf_len += temp_peer_stats->num_rates * |
| sizeof(wmi_rate_stats); |
| } |
| temp_peer_stats++; |
| } |
| } while (0); |
| |
| if (excess_data || |
| (sizeof(*fixed_param) > WMA_SVC_MSG_MAX_SIZE - buf_len)) { |
| WMA_LOGE("excess wmi buffer: rates:%d, peers:%d", |
| peer_stats->num_rates, fixed_param->num_peers); |
| VOS_ASSERT(0); |
| return -EINVAL; |
| } |
| |
| peer_stats_size = sizeof(tSirWifiPeerStat); |
| peer_info_size = sizeof(tSirWifiPeerInfo); |
| rate_stats_size = sizeof(tSirWifiRateStat); |
| link_stats_results_size = sizeof(*link_stats_results) + peer_stats_size + |
| (fixed_param->num_peers * peer_info_size) + |
| (total_num_rates * rate_stats_size); |
| |
| link_stats_results = vos_mem_malloc(link_stats_results_size); |
| if (NULL == link_stats_results ) { |
| WMA_LOGD("%s: could not allocate mem for stats results-len %zu", |
| __func__, link_stats_results_size); |
| return -ENOMEM; |
| } |
| |
| vos_mem_zero(link_stats_results, link_stats_results_size); |
| |
| link_stats_results->paramId = WMI_LINK_STATS_ALL_PEER; |
| link_stats_results->rspId = fixed_param->request_id; |
| link_stats_results->ifaceId = 0; |
| link_stats_results->num_peers = fixed_param->num_peers; |
| link_stats_results->peer_event_number = fixed_param->peer_event_number; |
| link_stats_results->moreResultToFollow = fixed_param->more_data; |
| |
| vos_mem_copy(link_stats_results->results, |
| &fixed_param->num_peers, peer_stats_size); |
| |
| results = (u_int8_t *)link_stats_results->results; |
| t_peer_stats = (u_int8_t *)peer_stats; |
| t_rate_stats = (u_int8_t *)rate_stats; |
| next_res_offset = peer_stats_size; |
| next_peer_offset = WMI_TLV_HDR_SIZE; |
| next_rate_offset = WMI_TLV_HDR_SIZE; |
| for (rate_cnt = 0; rate_cnt < fixed_param->num_peers; rate_cnt++) { |
| vos_mem_copy(results + next_res_offset, |
| t_peer_stats + next_peer_offset, |
| peer_info_size); |
| next_res_offset += peer_info_size; |
| |
| /* Copy rate stats associated with this peer */ |
| for (count = 0; count < peer_stats->num_rates; count++) { |
| rate_stats++; |
| |
| vos_mem_copy(results + next_res_offset, |
| t_rate_stats + next_rate_offset, |
| rate_stats_size); |
| next_res_offset += rate_stats_size; |
| next_rate_offset += sizeof(*rate_stats); |
| } |
| next_peer_offset += sizeof(*peer_stats); |
| peer_stats++; |
| } |
| |
| /* call hdd callback with Link Layer Statistics |
| * vdev_id/ifacId in link_stats_results will be |
| * used to retrieve the correct HDD context |
| */ |
| pMac->sme.pLinkLayerStatsIndCallback(pMac->hHdd, |
| WDA_LINK_LAYER_STATS_RESULTS_RSP, |
| link_stats_results); |
| vos_mem_free(link_stats_results); |
| |
| return 0; |
| } |
| |
| /** |
| * wma_unified_radio_tx_power_level_stats_event_handler() - tx power level stats |
| * @handle: WMI handle |
| * @cmd_param_info: command param info |
| * @len: Length of @cmd_param_info |
| * |
| * This is the WMI event handler function to receive radio stats tx |
| * power level stats. |
| * |
| * Return: 0 on success, error number otherwise. |
| */ |
| static int wma_unified_radio_tx_power_level_stats_event_handler(void *handle, |
| u_int8_t *cmd_param_info, u_int32_t len) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| WMI_RADIO_TX_POWER_LEVEL_STATS_EVENTID_param_tlvs *param_tlvs; |
| wmi_tx_power_level_stats_evt_fixed_param *fixed_param; |
| uint8_t *tx_power_level_values; |
| tSirLLStatsResults *link_stats_results; |
| tSirWifiRadioStat *rs_results; |
| |
| tpAniSirGlobal pMac = (tpAniSirGlobal )vos_get_context(VOS_MODULE_ID_PE, |
| wma_handle->vos_context); |
| |
| if (!pMac) { |
| WMA_LOGD("%s: NULL pMac ptr. Exiting", __func__); |
| return -EINVAL; |
| } |
| |
| if (!pMac->sme.pLinkLayerStatsIndCallback) { |
| WMA_LOGD("%s: HDD callback is null", __func__); |
| return -EINVAL; |
| } |
| |
| param_tlvs = (WMI_RADIO_TX_POWER_LEVEL_STATS_EVENTID_param_tlvs *)cmd_param_info; |
| if (!param_tlvs) { |
| WMA_LOGA("%s: Invalid tx power level stats event", __func__); |
| return -EINVAL; |
| } |
| |
| fixed_param = param_tlvs->fixed_param; |
| if (!fixed_param) { |
| WMA_LOGA("%s: Invalid param_tlvs for Radio tx_power level Stats", __func__); |
| return -EINVAL; |
| } |
| |
| link_stats_results = wma_handle->link_stats_results; |
| if (!link_stats_results) { |
| WMA_LOGA("%s: link_stats_results is NULL", __func__); |
| return -EINVAL; |
| } |
| |
| if (fixed_param->num_tx_power_levels > ((WMA_SVC_MSG_MAX_SIZE - |
| sizeof(*fixed_param)) / sizeof(uint32_t))) { |
| WMA_LOGE("%s: excess tx_power buffers:%d", __func__, |
| fixed_param->num_tx_power_levels); |
| VOS_ASSERT(0); |
| return -EINVAL; |
| } |
| |
| rs_results = (tSirWifiRadioStat *) &link_stats_results->results[0]; |
| tx_power_level_values = (uint8 *) param_tlvs->tx_time_per_power_level; |
| |
| rs_results->total_num_tx_power_levels = |
| fixed_param->total_num_tx_power_levels; |
| if (!rs_results->total_num_tx_power_levels) |
| goto post_stats; |
| |
| if (!rs_results->tx_time_per_power_level) { |
| rs_results->tx_time_per_power_level = vos_mem_malloc( |
| sizeof(uint32_t) * |
| rs_results->total_num_tx_power_levels); |
| if (!rs_results->tx_time_per_power_level) { |
| WMA_LOGA("%s: Mem alloc failed for tx power level stats", __func__); |
| /* In error case, atleast send the radio stats without |
| * tx_power_level stats */ |
| rs_results->total_num_tx_power_levels = 0; |
| goto post_stats; |
| } |
| } |
| vos_mem_copy(&rs_results->tx_time_per_power_level[fixed_param->power_level_offset], |
| tx_power_level_values, |
| sizeof(uint32_t) * fixed_param->num_tx_power_levels); |
| if (rs_results->total_num_tx_power_levels == |
| (fixed_param->num_tx_power_levels + fixed_param->power_level_offset)) |
| link_stats_results->moreResultToFollow = 0; |
| |
| /* If still data to receive, return from here */ |
| if (link_stats_results->moreResultToFollow) |
| return 0; |
| |
| post_stats: |
| /* call hdd callback with Link Layer Statistics |
| * vdev_id/ifacId in link_stats_results will be |
| * used to retrieve the correct HDD context |
| */ |
| pMac->sme.pLinkLayerStatsIndCallback(pMac->hHdd, |
| WDA_LINK_LAYER_STATS_RESULTS_RSP, |
| link_stats_results); |
| vos_mem_free(rs_results->tx_time_per_power_level); |
| rs_results->tx_time_per_power_level = NULL; |
| vos_mem_free(wma_handle->link_stats_results); |
| wma_handle->link_stats_results = NULL; |
| |
| return 0; |
| } |
| |
| |
| static int wma_unified_link_radio_stats_event_handler(void *handle, |
| u_int8_t *cmd_param_info, u_int32_t len) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| WMI_RADIO_LINK_STATS_EVENTID_param_tlvs *param_tlvs; |
| wmi_radio_link_stats_event_fixed_param *fixed_param; |
| wmi_radio_link_stats *radio_stats; |
| wmi_channel_stats *channel_stats; |
| tSirLLStatsResults *link_stats_results; |
| tSirWifiRadioStat *rs_results; |
| tSirWifiChannelStats *chn_results; |
| uint8_t *results, *t_radio_stats, *t_channel_stats; |
| uint32_t next_chan_offset, count; |
| size_t radio_stats_size, chan_stats_size; |
| size_t link_stats_results_size; |
| |
| tpAniSirGlobal pMac = (tpAniSirGlobal )vos_get_context(VOS_MODULE_ID_PE, |
| wma_handle->vos_context); |
| |
| if (!pMac) { |
| WMA_LOGD("%s: NULL pMac ptr. Exiting", __func__); |
| return -EINVAL; |
| } |
| |
| if (!pMac->sme.pLinkLayerStatsIndCallback) { |
| WMA_LOGD("%s: HDD callback is null", __func__); |
| return -EINVAL; |
| } |
| |
| param_tlvs = (WMI_RADIO_LINK_STATS_EVENTID_param_tlvs *)cmd_param_info; |
| if (!param_tlvs) { |
| WMA_LOGA("%s: Invalid stats event", __func__); |
| return -EINVAL; |
| } |
| |
| /* |
| * cmd_param_info contains |
| * wmi_radio_link_stats_event_fixed_param fixed_param; |
| * size of(struct wmi_radio_link_stats); |
| * num_channels * size of(struct wmi_channel_stats) |
| */ |
| fixed_param = param_tlvs->fixed_param; |
| radio_stats = param_tlvs->radio_stats; |
| channel_stats = param_tlvs->channel_stats; |
| |
| if (!fixed_param || !radio_stats || |
| (radio_stats->num_channels && !channel_stats)) { |
| WMA_LOGA("%s: Invalid param_tlvs for Radio Stats", __func__); |
| return -EINVAL; |
| } |
| |
| if (radio_stats->num_channels > |
| NUM_2_4GHZ_CHANNELS + NUM_5GHZ_CHANNELS) { |
| WMA_LOGE("%s: Too many channels %d", |
| __func__, radio_stats->num_channels); |
| return -EINVAL; |
| } |
| |
| radio_stats_size = sizeof(tSirWifiRadioStat); |
| chan_stats_size = sizeof(tSirWifiChannelStats); |
| |
| if (fixed_param->num_radio > |
| (UINT_MAX - sizeof(*link_stats_results)) / radio_stats_size) { |
| WMA_LOGE("excess num_radio %d is leading to int overflow", |
| fixed_param->num_radio); |
| return -EINVAL; |
| } |
| |
| link_stats_results_size = sizeof(*link_stats_results) + |
| radio_stats_size + |
| (radio_stats->num_channels * chan_stats_size); |
| |
| wma_handle->link_stats_results = vos_mem_malloc(link_stats_results_size); |
| if (NULL == wma_handle->link_stats_results) { |
| WMA_LOGD("%s: could not allocate mem for stats results-len %zu", |
| __func__, link_stats_results_size); |
| return -ENOMEM; |
| } |
| |
| link_stats_results = wma_handle->link_stats_results; |
| vos_mem_zero(link_stats_results, link_stats_results_size); |
| |
| link_stats_results->paramId = WMI_LINK_STATS_RADIO; |
| link_stats_results->rspId = fixed_param->request_id; |
| link_stats_results->ifaceId = 0; |
| link_stats_results->num_radio = fixed_param->num_radio; |
| link_stats_results->peer_event_number = 0; |
| |
| /* |
| * Backward compatibility: |
| * There are firmware(s) which will send Radio stats only with |
| * more_radio_events set to 0 and firmware which sends Radio stats |
| * followed by tx_power level stats with more_radio_events set to 1. |
| * if more_radio_events is set to 1, buffer the radio stats and |
| * wait for tx_power_level stats. |
| */ |
| link_stats_results->moreResultToFollow = fixed_param->more_radio_events; |
| |
| results = (u_int8_t *)link_stats_results->results; |
| t_radio_stats = (u_int8_t *)radio_stats; |
| t_channel_stats = (u_int8_t *)channel_stats; |
| |
| rs_results = (tSirWifiRadioStat *) &results[0]; |
| rs_results->radio = radio_stats->radio_id; |
| rs_results->onTime = radio_stats->on_time; |
| rs_results->txTime = radio_stats->tx_time; |
| rs_results->rxTime = radio_stats->rx_time; |
| rs_results->onTimeScan = radio_stats->on_time_scan; |
| rs_results->onTimeNbd = radio_stats->on_time_nbd; |
| rs_results->onTimeGscan = radio_stats->on_time_gscan; |
| rs_results->onTimeRoamScan = radio_stats->on_time_roam_scan; |
| rs_results->onTimePnoScan = radio_stats->on_time_pno_scan; |
| rs_results->onTimeHs20 = radio_stats->on_time_hs20; |
| rs_results->total_num_tx_power_levels = 0; |
| rs_results->tx_time_per_power_level = NULL; |
| rs_results->numChannels = radio_stats->num_channels; |
| |
| chn_results = (tSirWifiChannelStats *) &rs_results->channels[0]; |
| next_chan_offset = WMI_TLV_HDR_SIZE; |
| for (count = 0; count < radio_stats->num_channels; count++) { |
| channel_stats++; |
| |
| vos_mem_copy(chn_results, |
| t_channel_stats + next_chan_offset, |
| chan_stats_size); |
| chn_results++; |
| next_chan_offset += sizeof(*channel_stats); |
| } |
| |
| if (link_stats_results->moreResultToFollow) { |
| /* More results coming, don't post yet */ |
| return 0; |
| } |
| |
| pMac->sme.pLinkLayerStatsIndCallback(pMac->hHdd, |
| WDA_LINK_LAYER_STATS_RESULTS_RSP, |
| link_stats_results); |
| vos_mem_free(wma_handle->link_stats_results); |
| WMA_LOGD(FL("Radio Stats event posted to HDD")); |
| wma_handle->link_stats_results = NULL; |
| |
| return 0; |
| } |
| |
| /** |
| * wma_peer_ps_evt_handler() - handler for PEER power state change. |
| * @handle: wma handle |
| * @event: FW event |
| * @len: length of FW event |
| * |
| * Once peer STA power state changes, an event will be indicated by |
| * FW. This function send a link layer state change msg to HDD. HDD |
| * link layer callback will converts the event to NL msg. |
| * |
| * Return: 0 Success. Others fail. |
| */ |
| static int wma_peer_ps_evt_handler(void *handle, u_int8_t *event, |
| u_int32_t len) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| WMI_PEER_STA_PS_STATECHG_EVENTID_param_tlvs *param_buf; |
| wmi_peer_sta_ps_statechange_event_fixed_param *fixed_param; |
| tSirWifiPeerStat *peer_stat; |
| tSirWifiPeerInfo *peer_info; |
| tSirLLStatsResults *link_stats_results; |
| tSirMacAddr mac_address; |
| uint32_t result_len; |
| tpAniSirGlobal mac; |
| vos_msg_t vos_msg; |
| |
| mac = (tpAniSirGlobal)vos_get_context(VOS_MODULE_ID_PE, |
| wma_handle->vos_context); |
| if (!mac) { |
| WMA_LOGD("%s: NULL mac ptr. Exiting", __func__); |
| return -EINVAL; |
| } |
| |
| WMA_LOGD("%s: Posting Peer Stats PS event to HDD", __func__); |
| |
| param_buf = (WMI_PEER_STA_PS_STATECHG_EVENTID_param_tlvs *)event; |
| fixed_param = param_buf->fixed_param; |
| |
| result_len = sizeof(tSirLLStatsResults) + |
| sizeof(tSirWifiPeerStat) + |
| sizeof(tSirWifiPeerInfo); |
| link_stats_results = vos_mem_malloc(result_len); |
| if (link_stats_results == NULL) { |
| WMA_LOGE("%s: Cannot allocate link layer stats.", __func__); |
| return -EINVAL; |
| } |
| vos_mem_zero(link_stats_results, result_len); |
| |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&fixed_param->peer_macaddr, &mac_address[0]); |
| WMA_LOGD("Peer power state change event from FW"); |
| WMA_LOGD("Fixed Param:"); |
| WMA_LOGD("MAC address: %2x:%2x:%2x:%2x:%2x:%2x, Power state: %d", |
| mac_address[0], mac_address[1], mac_address[2], |
| mac_address[3], mac_address[4], mac_address[5], |
| fixed_param->peer_ps_state); |
| |
| link_stats_results->paramId = WMI_LL_STATS_EXT_PS_CHG; |
| link_stats_results->num_peers = 1; |
| link_stats_results->peer_event_number = 1; |
| link_stats_results->moreResultToFollow = 0; |
| |
| peer_stat = (tSirWifiPeerStat *)link_stats_results->results; |
| peer_stat->numPeers = 1; |
| peer_info = (tSirWifiPeerInfo *)peer_stat->peerInfo; |
| vos_mem_copy(&peer_info->peerMacAddress, |
| &mac_address, sizeof(tSirMacAddr)); |
| peer_info->power_saving = fixed_param->peer_ps_state; |
| |
| vos_msg.type = eWMI_SME_LL_STATS_IND; |
| vos_msg.bodyptr = (void *)link_stats_results; |
| vos_msg.bodyval = 0; |
| if (VOS_STATUS_SUCCESS != |
| vos_mq_post_message(VOS_MQ_ID_SME, &vos_msg)) { |
| WMA_LOGP(FL("Failed to post peer stat change msg!")); |
| vos_mem_free(link_stats_results); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| #define WMA_FILL_TX_STATS(eve, msg) do {\ |
| (msg)->msdus = (eve)->tx_msdu_cnt;\ |
| (msg)->mpdus = (eve)->tx_mpdu_cnt;\ |
| (msg)->ppdus = (eve)->tx_ppdu_cnt;\ |
| (msg)->bytes = (eve)->tx_bytes;\ |
| (msg)->drops = (eve)->tx_msdu_drop_cnt;\ |
| (msg)->drop_bytes = (eve)->tx_drop_bytes;\ |
| (msg)->retries = (eve)->tx_mpdu_retry_cnt;\ |
| (msg)->failed = (eve)->tx_mpdu_fail_cnt;\ |
| } while (0) |
| |
| #define WMA_FILL_RX_STATS(eve, msg) do {\ |
| (msg)->mpdus = (eve)->mac_rx_mpdu_cnt;\ |
| (msg)->bytes = (eve)->mac_rx_bytes;\ |
| (msg)->ppdus = (eve)->phy_rx_ppdu_cnt;\ |
| (msg)->ppdu_bytes = (eve)->phy_rx_bytes;\ |
| (msg)->mpdu_retry = (eve)->rx_mpdu_retry_cnt;\ |
| (msg)->mpdu_dup = (eve)->rx_mpdu_dup_cnt;\ |
| (msg)->mpdu_discard = (eve)->rx_mpdu_discard_cnt;\ |
| } while (0) |
| |
| /** |
| * __wma_get_ll_stats_ext_buf() - alloc result buffer for MAC counters |
| * @len: buffer length output |
| * @peer_num: peer number |
| * @fixed_param: fixed parameters in WMI event |
| * |
| * Structure of the stats message |
| * LL_EXT_STATS |
| * | |
| * |--Channel stats[1~n] |
| * |--Peer[1~n] |
| * | |
| * +---Signal |
| * +---TX |
| * | +---BE |
| * | +---BK |
| * | +---VI |
| * | +---VO |
| * | |
| * +---RX |
| * +---BE |
| * +---BK |
| * +---VI |
| * +---VO |
| * For each Access Category, the arregation and mcs |
| * stats are as this: |
| * TX |
| * +-BE/BK/VI/VO |
| * +----tx_mpdu_aggr_array |
| * +----tx_succ_mcs_array |
| * +----tx_fail_mcs_array |
| * +----tx_delay_array |
| * RX |
| * +-BE/BK/VI/VO |
| * +----rx_mpdu_aggr_array |
| * +----rx_mcs_array |
| * |
| * return: Address for result buffer. |
| */ |
| static tSirLLStatsResults *__wma_get_ll_stats_ext_buf(uint32_t *len, |
| uint32_t peer_num, |
| wmi_report_stats_event_fixed_param *fixed_param) |
| { |
| tSirLLStatsResults *buf; |
| uint32_t buf_len; |
| uint32_t total_array_len, total_peer_len; |
| bool excess_data = false; |
| |
| if (!len || !fixed_param) { |
| WMA_LOGE(FL("Invalid input parameters.")); |
| return NULL; |
| } |
| |
| /* |
| * Result buffer has a structure like this: |
| * --------------------------------- |
| * | trigger_cond_i | |
| * +-------------------------------+ |
| * | cca_chgd_bitmap | |
| * +-------------------------------+ |
| * | sig_chgd_bitmap | |
| * +-------------------------------+ |
| * | tx_chgd_bitmap | |
| * +-------------------------------+ |
| * | rx_chgd_bitmap | |
| * +-------------------------------+ |
| * | peer_num | |
| * +-------------------------------+ |
| * | channel_num | |
| * +-------------------------------+ |
| * | tx_mpdu_aggr_array_len | |
| * +-------------------------------+ |
| * | tx_succ_mcs_array_len | |
| * +-------------------------------+ |
| * | tx_fail_mcs_array_len | |
| * +-------------------------------+ |
| * | tx_delay_array_len | |
| * +-------------------------------+ |
| * | rx_mpdu_aggr_array_len | |
| * +-------------------------------+ |
| * | rx_mcs_array_len | |
| * +-------------------------------+ |
| * | pointer to CCA stats | |
| * +-------------------------------+ |
| * | CCA stats | |
| * +-------------------------------+ |
| * | peer_stats |----+ |
| * +-------------------------------+ | |
| * | TX aggr/mcs parameters array | | |
| * | Length of this buffer is | | |
| * | not fixed. |<-+ | |
| * +-------------------------------+ | | |
| * | per peer tx stats |--+ | |
| * | BE | <--+ |
| * | BK | | |
| * | VI | | |
| * | VO | | |
| * +-------------------------------+ | |
| * | TX aggr/mcs parameters array | | |
| * | Length of this buffer is | | |
| * | not fixed. |<-+ | |
| * +-------------------------------+ | | |
| * | peer peer rx stats |--+ | |
| * | BE | <--+ |
| * | BK | |
| * | VI | |
| * | VO | |
| * --------------------------------- |
| */ |
| buf_len = sizeof(tSirLLStatsResults) + |
| sizeof(struct sir_wifi_ll_ext_stats); |
| |
| do { |
| if (fixed_param->num_chan_cca_stats > (WMA_SVC_MSG_MAX_SIZE / |
| sizeof(struct sir_wifi_chan_cca_stats))) { |
| excess_data = true; |
| break; |
| } |
| buf_len += (fixed_param->num_chan_cca_stats * |
| sizeof(struct sir_wifi_chan_cca_stats)); |
| if (fixed_param->tx_mpdu_aggr_array_len > |
| WMA_SVC_MSG_MAX_SIZE) { |
| excess_data = true; |
| break; |
| } else { |
| total_array_len = fixed_param->tx_mpdu_aggr_array_len; |
| } |
| if (fixed_param->tx_succ_mcs_array_len > |
| (WMA_SVC_MSG_MAX_SIZE - total_array_len)) { |
| excess_data = true; |
| break; |
| } else { |
| total_array_len += fixed_param->tx_succ_mcs_array_len; |
| } |
| if (fixed_param->tx_fail_mcs_array_len > |
| (WMA_SVC_MSG_MAX_SIZE - total_array_len)) { |
| excess_data = true; |
| break; |
| } else { |
| total_array_len += fixed_param->tx_fail_mcs_array_len; |
| } |
| if (fixed_param->tx_ppdu_delay_array_len > |
| (WMA_SVC_MSG_MAX_SIZE - total_array_len)) { |
| excess_data = true; |
| break; |
| } else { |
| total_array_len += fixed_param->tx_ppdu_delay_array_len; |
| } |
| if (fixed_param->rx_mpdu_aggr_array_len > |
| (WMA_SVC_MSG_MAX_SIZE - total_array_len)) { |
| excess_data = true; |
| break; |
| } else { |
| total_array_len += fixed_param->rx_mpdu_aggr_array_len; |
| } |
| if (fixed_param->rx_mcs_array_len > |
| (WMA_SVC_MSG_MAX_SIZE - total_array_len)) { |
| excess_data = true; |
| break; |
| } else { |
| total_array_len += fixed_param->rx_mcs_array_len; |
| } |
| |
| if (total_array_len > (WMA_SVC_MSG_MAX_SIZE / |
| (sizeof(uint16_t) * WLAN_MAX_AC))) { |
| excess_data = true; |
| break; |
| } else { |
| total_peer_len = (sizeof(uint32_t) * WLAN_MAX_AC * |
| total_array_len) + |
| (WLAN_MAX_AC * |
| (sizeof(struct sir_wifi_tx) + |
| sizeof(struct sir_wifi_rx))); |
| } |
| buf_len += peer_num * |
| (sizeof(struct sir_wifi_ll_ext_peer_stats) + |
| total_peer_len); |
| } while (0); |
| |
| if (excess_data) { |
| WMA_LOGE("%s: excess wmi buffer: peer %d cca %d tx_mpdu %d ", |
| __func__, peer_num, fixed_param->num_chan_cca_stats, |
| fixed_param->tx_mpdu_aggr_array_len); |
| WMA_LOGE("tx_succ %d tx_fail %d tx_ppdu %d ", |
| fixed_param->tx_succ_mcs_array_len, |
| fixed_param->tx_fail_mcs_array_len, |
| fixed_param->tx_ppdu_delay_array_len); |
| WMA_LOGE("rx_mpdu %d rx_mcs %d", |
| fixed_param->rx_mpdu_aggr_array_len, |
| fixed_param->rx_mcs_array_len); |
| return NULL; |
| } |
| |
| buf = (tSirLLStatsResults *)vos_mem_malloc(buf_len); |
| if (buf == NULL) { |
| WMA_LOGE("%s: Cannot allocate link layer stats.", __func__); |
| buf_len = 0; |
| return NULL; |
| } |
| |
| vos_mem_zero(buf, buf_len); |
| *len = buf_len; |
| return buf; |
| } |
| |
| /** |
| * __wma_fill_tx_stats() - Fix TX stats into result buffer |
| * @ll_stats: LL stats buffer |
| * @fix_param: parameters with fixed length in WMI event |
| * @param_buf: parameters without fixed length in WMI event |
| * @buf: buffer for TLV parameters |
| */ |
| static void __wma_fill_tx_stats(struct sir_wifi_ll_ext_stats *ll_stats, |
| wmi_report_stats_event_fixed_param *fix_param, |
| WMI_REPORT_STATS_EVENTID_param_tlvs *param_buf, |
| uint8_t **buf, |
| uint32_t *buf_length) |
| { |
| uint8_t *result; |
| uint32_t i, j, k; |
| wmi_peer_ac_tx_stats *wmi_peer_tx; |
| wmi_tx_stats *wmi_tx; |
| struct sir_wifi_tx *tx_stats; |
| struct sir_wifi_ll_ext_peer_stats *peer_stats; |
| uint8_t *counter; |
| uint32_t *tx_mpdu_aggr, *tx_succ_mcs, *tx_fail_mcs, *tx_delay; |
| uint32_t len, dst_len, tx_mpdu_aggr_array_len, tx_succ_mcs_array_len, |
| tx_fail_mcs_array_len, tx_delay_array_len; |
| |
| result = *buf; |
| dst_len = *buf_length; |
| tx_mpdu_aggr_array_len = fix_param->tx_mpdu_aggr_array_len; |
| ll_stats->tx_mpdu_aggr_array_len = tx_mpdu_aggr_array_len; |
| tx_succ_mcs_array_len = fix_param->tx_succ_mcs_array_len; |
| ll_stats->tx_succ_mcs_array_len = tx_succ_mcs_array_len; |
| tx_fail_mcs_array_len = fix_param->tx_fail_mcs_array_len; |
| ll_stats->tx_fail_mcs_array_len = tx_fail_mcs_array_len; |
| tx_delay_array_len = fix_param->tx_ppdu_delay_array_len; |
| ll_stats->tx_delay_array_len = tx_delay_array_len; |
| wmi_peer_tx = param_buf->peer_ac_tx_stats; |
| wmi_tx = param_buf->tx_stats; |
| |
| len = fix_param->num_peer_ac_tx_stats * |
| WLAN_MAX_AC * tx_mpdu_aggr_array_len; |
| if (len * sizeof(uint32_t) <= dst_len) { |
| tx_mpdu_aggr = (uint32_t *)result; |
| counter = (uint8_t *)param_buf->tx_mpdu_aggr; |
| for (i = 0; i < len; i++) { |
| result[4 * i] = counter[2 * i]; |
| result[4 * i + 1] = counter[2 * i + 1]; |
| } |
| result += len * sizeof(uint32_t); |
| dst_len -= len * sizeof(uint32_t); |
| } else { |
| WMA_LOGE(FL("TX_MPDU_AGGR buffer length is wrong.")); |
| tx_mpdu_aggr = NULL; |
| } |
| |
| len = fix_param->num_peer_ac_tx_stats * WLAN_MAX_AC * |
| tx_succ_mcs_array_len; |
| if (len * sizeof(uint32_t) <= dst_len) { |
| tx_succ_mcs = (uint32_t *)result; |
| counter = (uint8_t *)param_buf->tx_succ_mcs; |
| for (i = 0; i < len; i++) { |
| result[4 * i] = counter[2 * i]; |
| result[4 * i + 1] = counter[2 * i + 1]; |
| } |
| len *= sizeof(uint32_t); |
| result += len; |
| dst_len -= len; |
| } else { |
| WMA_LOGE(FL("TX_SUCC_MCS buffer length is wrong.")); |
| tx_succ_mcs = NULL; |
| } |
| |
| len = fix_param->num_peer_ac_tx_stats * WLAN_MAX_AC * |
| tx_fail_mcs_array_len; |
| if (len * sizeof(uint32_t) <= dst_len) { |
| tx_fail_mcs = (uint32_t *)result; |
| counter = (uint8_t *)param_buf->tx_fail_mcs; |
| for (i = 0; i < len; i++) { |
| result[4 * i] = counter[2 * i]; |
| result[4 * i + 1] = counter[2 * i + 1]; |
| } |
| len *= sizeof(uint32_t); |
| result += len; |
| dst_len -= len; |
| } else { |
| WMA_LOGE(FL("TX_FAIL_MCS buffer length is wrong.")); |
| tx_fail_mcs = NULL; |
| } |
| |
| len = fix_param->num_peer_ac_tx_stats * |
| WLAN_MAX_AC * tx_delay_array_len; |
| if (len * sizeof(uint32_t) <= dst_len) { |
| tx_delay = (uint32_t *)result; |
| counter = (uint8_t *)param_buf->tx_ppdu_delay; |
| for (i = 0; i < len; i++) { |
| result[4 * i] = counter[2 * i]; |
| result[4 * i + 1] = counter[2 * i + 1]; |
| } |
| len *= sizeof(uint32_t); |
| result += len; |
| dst_len -= len; |
| } else { |
| WMA_LOGE(FL("TX_DELAY buffer length is wrong.")); |
| tx_delay = NULL; |
| } |
| |
| /* per peer tx stats */ |
| peer_stats = ll_stats->peer_stats; |
| |
| for (i = 0; i < fix_param->num_peer_ac_tx_stats; i++) { |
| uint32_t peer_id = wmi_peer_tx[i].peer_id; |
| struct sir_wifi_tx *ac; |
| wmi_tx_stats *wmi_tx_stats; |
| |
| for (j = 0; j < ll_stats->peer_num; j++) { |
| peer_stats += j; |
| if (peer_stats->peer_id == WIFI_INVALID_PEER_ID || |
| peer_stats->peer_id == peer_id) |
| break; |
| } |
| |
| if (j < ll_stats->peer_num) { |
| peer_stats->peer_id = wmi_peer_tx[i].peer_id; |
| peer_stats->vdev_id = wmi_peer_tx[i].vdev_id; |
| tx_stats = (struct sir_wifi_tx *)result; |
| for (k = 0; k < WLAN_MAX_AC; k++) { |
| wmi_tx_stats = &wmi_tx[i * WLAN_MAX_AC + k]; |
| ac = &tx_stats[k]; |
| WMA_FILL_TX_STATS(wmi_tx_stats, ac); |
| ac->mpdu_aggr_size = tx_mpdu_aggr; |
| ac->aggr_len = tx_mpdu_aggr_array_len * |
| sizeof(uint32_t); |
| ac->success_mcs_len = tx_succ_mcs_array_len * |
| sizeof(uint32_t); |
| ac->success_mcs = tx_succ_mcs; |
| ac->fail_mcs = tx_fail_mcs; |
| ac->fail_mcs_len = tx_fail_mcs_array_len * |
| sizeof(uint32_t); |
| ac->delay = tx_delay; |
| ac->delay_len = tx_delay_array_len * |
| sizeof(uint32_t); |
| peer_stats->ac_stats[k].tx_stats = ac; |
| peer_stats->ac_stats[k].type = k; |
| tx_mpdu_aggr += tx_mpdu_aggr_array_len; |
| tx_succ_mcs += tx_succ_mcs_array_len; |
| tx_fail_mcs += tx_fail_mcs_array_len; |
| tx_delay += tx_delay_array_len; |
| } |
| result += WLAN_MAX_AC * sizeof(struct sir_wifi_tx); |
| } else { |
| /* |
| * Buffer for Peer TX counter overflow. |
| * There is peer ID mismatch between TX, RX, |
| * signal counters. |
| */ |
| WMA_LOGE(FL("One peer TX info is dropped.")); |
| |
| tx_mpdu_aggr += tx_mpdu_aggr_array_len * WLAN_MAX_AC; |
| tx_succ_mcs += tx_succ_mcs_array_len * WLAN_MAX_AC; |
| tx_fail_mcs += tx_fail_mcs_array_len * WLAN_MAX_AC; |
| tx_delay += tx_delay_array_len * WLAN_MAX_AC; |
| } |
| } |
| *buf = result; |
| *buf_length = dst_len; |
| } |
| |
| /** |
| * __wma_fill_rx_stats() - Fix RX stats into result buffer |
| * @ll_stats: LL stats buffer |
| * @fix_param: parameters with fixed length in WMI event |
| * @param_buf: parameters without fixed length in WMI event |
| * @buf: buffer for TLV parameters |
| */ |
| static void __wma_fill_rx_stats(struct sir_wifi_ll_ext_stats *ll_stats, |
| wmi_report_stats_event_fixed_param *fix_param, |
| WMI_REPORT_STATS_EVENTID_param_tlvs *param_buf, |
| uint8_t **buf, |
| uint32_t *buf_length) |
| { |
| uint8 *result; |
| uint32_t i, j, k; |
| uint32_t *rx_mpdu_aggr, *rx_mcs; |
| wmi_rx_stats *wmi_rx; |
| wmi_peer_ac_rx_stats *wmi_peer_rx; |
| struct sir_wifi_rx *rx_stats; |
| struct sir_wifi_ll_ext_peer_stats *peer_stats; |
| uint32_t len, dst_len, rx_mpdu_aggr_array_len, rx_mcs_array_len; |
| uint8_t *counter; |
| |
| rx_mpdu_aggr_array_len = fix_param->rx_mpdu_aggr_array_len; |
| ll_stats->rx_mpdu_aggr_array_len = rx_mpdu_aggr_array_len; |
| rx_mcs_array_len = fix_param->rx_mcs_array_len; |
| ll_stats->rx_mcs_array_len = rx_mcs_array_len; |
| wmi_peer_rx = param_buf->peer_ac_rx_stats; |
| wmi_rx = param_buf->rx_stats; |
| |
| result = *buf; |
| dst_len = *buf_length; |
| len = fix_param->num_peer_ac_rx_stats * |
| WLAN_MAX_AC * rx_mpdu_aggr_array_len; |
| if (len * sizeof(uint32_t) <= dst_len) { |
| rx_mpdu_aggr = (uint32_t *)result; |
| counter = (uint8_t *)param_buf->rx_mpdu_aggr; |
| for (i = 0; i < len; i++) { |
| result[4 * i] = counter[2 * i]; |
| result[4 * i + 1] = counter[2 * i + 1]; |
| } |
| len *= sizeof(uint32_t); |
| result += len; |
| dst_len -= len; |
| } else { |
| WMA_LOGE(FL("RX_MPDU_AGGR array length is wrong.")); |
| rx_mpdu_aggr = NULL; |
| } |
| |
| len = fix_param->num_peer_ac_rx_stats * |
| WLAN_MAX_AC * rx_mcs_array_len; |
| if (len * sizeof(uint32_t) <= dst_len) { |
| rx_mcs = (uint32_t *)result; |
| counter = (uint8_t *)param_buf->rx_mcs; |
| for (i = 0; i < len; i++) { |
| result[4 * i] = counter[2 * i]; |
| result[4 * i + 1] = counter[2 * i + 1]; |
| } |
| len *= sizeof(uint32_t); |
| result += len; |
| dst_len -= len; |
| } else { |
| WMA_LOGE(FL("RX_MCS array length is wrong.")); |
| rx_mcs = NULL; |
| } |
| |
| /* per peer rx stats */ |
| peer_stats = ll_stats->peer_stats; |
| for (i = 0; i < fix_param->num_peer_ac_rx_stats; i++) { |
| uint32_t peer_id = wmi_peer_rx[i].peer_id; |
| struct sir_wifi_rx *ac; |
| wmi_rx_stats *wmi_rx_stats; |
| |
| for (j = 0; j < ll_stats->peer_num; j++) { |
| peer_stats += j; |
| if ((peer_stats->peer_id == WIFI_INVALID_PEER_ID) || |
| (peer_stats->peer_id == peer_id)) |
| break; |
| } |
| |
| if (j < ll_stats->peer_num) { |
| peer_stats->peer_id = wmi_peer_rx[i].peer_id; |
| peer_stats->vdev_id = wmi_peer_rx[i].vdev_id; |
| peer_stats->sta_ps_inds = wmi_peer_rx[i].sta_ps_inds; |
| peer_stats->sta_ps_durs = wmi_peer_rx[i].sta_ps_durs; |
| peer_stats->rx_probe_reqs = |
| wmi_peer_rx[i].rx_probe_reqs; |
| peer_stats->rx_oth_mgmts = wmi_peer_rx[i].rx_oth_mgmts; |
| rx_stats = (struct sir_wifi_rx *)result; |
| |
| for (k = 0; k < WLAN_MAX_AC; k++) { |
| wmi_rx_stats = &wmi_rx[i * WLAN_MAX_AC + k]; |
| ac = &rx_stats[k]; |
| WMA_FILL_RX_STATS(wmi_rx_stats, ac); |
| ac->mpdu_aggr = rx_mpdu_aggr; |
| ac->aggr_len = rx_mpdu_aggr_array_len * |
| sizeof(uint32_t); |
| ac->mcs = rx_mcs; |
| ac->mcs_len = rx_mcs_array_len * |
| sizeof(uint32_t); |
| peer_stats->ac_stats[k].rx_stats = ac; |
| peer_stats->ac_stats[k].type = k; |
| rx_mpdu_aggr += rx_mpdu_aggr_array_len; |
| rx_mcs += rx_mcs_array_len; |
| } |
| result += WLAN_MAX_AC * sizeof(struct sir_wifi_rx); |
| } else { |
| /* |
| * Buffer for Peer RX counter overflow. |
| * There is peer ID mismatch between TX, RX, |
| * signal counters. |
| */ |
| WMA_LOGE(FL("One peer RX info is dropped.")); |
| rx_mpdu_aggr += rx_mpdu_aggr_array_len * WLAN_MAX_AC; |
| rx_mcs += rx_mcs_array_len * WLAN_MAX_AC; |
| } |
| } |
| *buf = result; |
| *buf_length = dst_len; |
| } |
| |
| /** |
| * wma_ll_stats_evt_handler() - handler for MAC layer counters. |
| * @handle - wma handle |
| * @event - FW event |
| * @len - length of FW event |
| * |
| * return: 0 success. |
| */ |
| static int wma_ll_stats_evt_handler(void *handle, u_int8_t *event, |
| u_int32_t len) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| WMI_REPORT_STATS_EVENTID_param_tlvs *param_buf; |
| wmi_report_stats_event_fixed_param *fixed_param; |
| tSirLLStatsResults *link_stats_results; |
| wmi_chan_cca_stats *wmi_cca_stats; |
| wmi_peer_signal_stats *wmi_peer_signal; |
| wmi_peer_ac_rx_stats *wmi_peer_rx; |
| struct sir_wifi_ll_ext_stats *ll_stats; |
| struct sir_wifi_ll_ext_peer_stats *peer_stats; |
| struct sir_wifi_chan_cca_stats *cca_stats; |
| struct sir_wifi_peer_signal_stats *peer_signal; |
| uint8_t *result; |
| uint32_t i, peer_num, result_size, dst_len; |
| tpAniSirGlobal mac; |
| vos_msg_t vos_msg; |
| struct ol_txrx_peer_t *peer; |
| ol_txrx_pdev_handle pdev; |
| |
| mac = (tpAniSirGlobal)vos_get_context(VOS_MODULE_ID_PE, |
| wma_handle->vos_context); |
| if (!mac) { |
| WMA_LOGD("%s: NULL mac ptr. Exiting", __func__); |
| return -EINVAL; |
| } |
| |
| if (!mac->sme.link_layer_stats_ext_cb) { |
| WMA_LOGD("%s: HDD callback is null", __func__); |
| return -EINVAL; |
| } |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma_handle->vos_context); |
| if (!pdev) { |
| WMA_LOGD("%s: NULL ol_txrx pdev ptr. Exiting", __func__); |
| return -EINVAL; |
| } |
| |
| WMA_LOGD("%s: Posting MAC counters event to HDD", __func__); |
| |
| param_buf = (WMI_REPORT_STATS_EVENTID_param_tlvs *)event; |
| fixed_param = param_buf->fixed_param; |
| wmi_cca_stats = param_buf->chan_cca_stats; |
| wmi_peer_signal = param_buf->peer_signal_stats; |
| wmi_peer_rx = param_buf->peer_ac_rx_stats; |
| |
| /* Get the MAX of three peer numbers */ |
| peer_num = fixed_param->num_peer_signal_stats > |
| fixed_param->num_peer_ac_tx_stats ? |
| fixed_param->num_peer_signal_stats : |
| fixed_param->num_peer_ac_tx_stats; |
| peer_num = peer_num > fixed_param->num_peer_ac_rx_stats ? |
| peer_num : fixed_param->num_peer_ac_rx_stats; |
| |
| if (peer_num == 0) |
| return -EINVAL; |
| |
| link_stats_results = __wma_get_ll_stats_ext_buf(&result_size, |
| peer_num, |
| fixed_param); |
| if (!link_stats_results) { |
| WMA_LOGE("%s: Fail to allocate stats buffer", __func__); |
| return -EINVAL; |
| } |
| link_stats_results->paramId = WMI_LL_STATS_EXT_MAC_COUNTER; |
| link_stats_results->num_peers = peer_num; |
| link_stats_results->peer_event_number = 1; |
| link_stats_results->moreResultToFollow = 0; |
| |
| ll_stats = (struct sir_wifi_ll_ext_stats *)link_stats_results->results; |
| ll_stats->trigger_cond_id = fixed_param->trigger_cond_id; |
| ll_stats->cca_chgd_bitmap = fixed_param->cca_chgd_bitmap; |
| ll_stats->sig_chgd_bitmap = fixed_param->sig_chgd_bitmap; |
| ll_stats->tx_chgd_bitmap = fixed_param->tx_chgd_bitmap; |
| ll_stats->rx_chgd_bitmap = fixed_param->rx_chgd_bitmap; |
| ll_stats->channel_num = fixed_param->num_chan_cca_stats; |
| ll_stats->peer_num = peer_num; |
| |
| result = (uint8_t *)ll_stats->stats; |
| peer_stats = (struct sir_wifi_ll_ext_peer_stats *)result; |
| ll_stats->peer_stats = peer_stats; |
| |
| for (i = 0; i < peer_num; i++) { |
| peer_stats[i].peer_id = WIFI_INVALID_PEER_ID; |
| peer_stats[i].vdev_id = WIFI_INVALID_VDEV_ID; |
| } |
| |
| /* Per peer signal */ |
| result_size -= sizeof(struct sir_wifi_ll_ext_stats); |
| dst_len = sizeof(struct sir_wifi_peer_signal_stats); |
| for (i = 0; i < fixed_param->num_peer_signal_stats; i++) { |
| peer_stats[i].peer_id = wmi_peer_signal->peer_id; |
| peer_stats[i].vdev_id = wmi_peer_signal->vdev_id; |
| peer_signal = &peer_stats[i].peer_signal_stats; |
| |
| WMA_LOGI("%d antennas for peer %d", |
| wmi_peer_signal->num_chains_valid, |
| wmi_peer_signal->peer_id); |
| if (dst_len <= result_size) { |
| peer_signal->vdev_id = wmi_peer_signal->vdev_id; |
| peer_signal->peer_id = wmi_peer_signal->peer_id; |
| peer_signal->num_chain = |
| wmi_peer_signal->num_chains_valid; |
| vos_mem_copy(peer_signal->per_ant_snr, |
| wmi_peer_signal->per_chain_snr, |
| sizeof(peer_signal->per_ant_snr)); |
| vos_mem_copy(peer_signal->nf, |
| wmi_peer_signal->per_chain_nf, |
| sizeof(peer_signal->nf)); |
| vos_mem_copy(peer_signal->per_ant_rx_mpdus, |
| wmi_peer_signal->per_antenna_rx_mpdus, |
| sizeof(peer_signal->per_ant_rx_mpdus)); |
| vos_mem_copy(peer_signal->per_ant_tx_mpdus, |
| wmi_peer_signal->per_antenna_tx_mpdus, |
| sizeof(peer_signal->per_ant_tx_mpdus)); |
| result_size -= dst_len; |
| } else { |
| WMA_LOGE(FL("Invalid length of PEER signal.")); |
| } |
| |
| peer = ol_txrx_peer_find_by_id(pdev, |
| wmi_peer_signal->peer_id); |
| if (!peer) { |
| WMA_LOGE(FL("Invalid Peer ID %d in FW message."), |
| wmi_peer_signal->peer_id); |
| } else { |
| vos_mem_copy(&peer_stats[i].mac_address, |
| &peer->mac_addr, |
| sizeof(peer_stats[i].mac_address)); |
| WMA_LOGI("Peer %d mac address is: ", |
| wmi_peer_signal->peer_id); |
| WMA_LOGI("%2x:%2x:%2x:%2x:%2x:%2x.", |
| peer->mac_addr.raw[0], peer->mac_addr.raw[1], |
| peer->mac_addr.raw[2], peer->mac_addr.raw[3], |
| peer->mac_addr.raw[4], peer->mac_addr.raw[5]); |
| } |
| wmi_peer_signal++; |
| } |
| |
| result += peer_num * sizeof(struct sir_wifi_ll_ext_peer_stats); |
| cca_stats = (struct sir_wifi_chan_cca_stats *)result; |
| ll_stats->cca = cca_stats; |
| dst_len = sizeof(struct sir_wifi_chan_cca_stats); |
| for (i = 0; i < ll_stats->channel_num; i++) { |
| if (dst_len <= result_size) { |
| vos_mem_copy(&cca_stats[i], &wmi_cca_stats->vdev_id, |
| dst_len); |
| result_size -= dst_len; |
| } else { |
| WMA_LOGE(FL("Invalid length of CCA.")); |
| } |
| } |
| |
| result += i * sizeof(struct sir_wifi_chan_cca_stats); |
| __wma_fill_tx_stats(ll_stats, fixed_param, param_buf, |
| &result, &result_size); |
| __wma_fill_rx_stats(ll_stats, fixed_param, param_buf, |
| &result, &result_size); |
| vos_msg.type = eWMI_SME_LL_STATS_IND; |
| vos_msg.bodyptr = (void *)link_stats_results; |
| vos_msg.bodyval = 0; |
| if (VOS_STATUS_SUCCESS != |
| vos_mq_post_message(VOS_MQ_ID_SME, &vos_msg)) { |
| WMA_LOGP(FL("Failed to post peer stat change msg!")); |
| vos_mem_free(link_stats_results); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int wmi_unified_pdev_set_param(wmi_unified_t wmi_handle, |
| WMI_PDEV_PARAM param_id, |
| u_int32_t param_value); |
| |
| /** |
| * wma_tx_failure_cb() - TX failure callback |
| * @ctx: txrx context |
| * @num_msdu: number of msdu with the same status |
| * @tid: TID number |
| * @status: failure status |
| * 1: TX packet discarded |
| * 2: No ACK |
| * 3: Postpone |
| */ |
| void wma_tx_failure_cb(void *ctx, uint32_t num_msdu, uint8_t tid, uint32 status) |
| { |
| tSirLLStatsResults *results; |
| struct sir_wifi_iface_tx_fail *tx_fail; |
| void *vos_context = vos_get_global_context(VOS_MODULE_ID_WDA, NULL); |
| tpAniSirGlobal mac; |
| uint32_t len; |
| vos_msg_t vos_msg; |
| |
| mac = (tpAniSirGlobal)vos_get_context(VOS_MODULE_ID_PE, vos_context); |
| if (!mac) { |
| WMA_LOGD("%s: NULL mac ptr. Exiting", __func__); |
| return; |
| } |
| |
| len = sizeof(tSirLLStatsResults) + |
| sizeof(struct sir_wifi_iface_tx_fail); |
| results = vos_mem_malloc(len); |
| if (results == NULL) { |
| WMA_LOGE("%s: Cannot allocate link layer stats.", __func__); |
| return; |
| } |
| |
| vos_mem_zero(results, len); |
| results->paramId = WMI_LL_STATS_EXT_TX_FAIL; |
| results->num_peers = 1; |
| results->peer_event_number = 1; |
| results->moreResultToFollow = 0; |
| |
| tx_fail = (struct sir_wifi_iface_tx_fail *)results->results; |
| tx_fail->tid = tid; |
| tx_fail->msdu_num = num_msdu; |
| tx_fail->status = status; |
| vos_msg.type = eWMI_SME_LL_STATS_IND; |
| vos_msg.bodyptr = (void *)results; |
| vos_msg.bodyval = 0; |
| if (VOS_STATUS_SUCCESS != |
| vos_mq_post_message(VOS_MQ_ID_SME, &vos_msg)) { |
| WMA_LOGP(FL("Failed to post tx failure msg!")); |
| vos_mem_free(results); |
| } |
| } |
| |
| /** |
| * void wma_config_stats_ext_threshold - set threthold for MAC counters |
| * @wma: wma handler |
| * @threshold: threhold for MAC counters |
| * |
| * For each MAC layer counter, FW holds two copies. One is the current value. |
| * The other is the last report. Once a current counter's increment is larger |
| * than the threshold, FW will indicate that counter to host even if the |
| * monitoring timer does not expire. |
| */ |
| void wma_config_stats_ext_threshold(struct wma_handle *wma, |
| struct sir_ll_ext_stats_threshold *thresh) |
| { |
| uint32_t len, tag, hdr_len; |
| uint8_t *buf_ptr; |
| wmi_buf_t buf; |
| wmi_pdev_set_stats_threshold_cmd_fixed_param *cmd; |
| wmi_chan_cca_stats_thresh *cca; |
| wmi_peer_signal_stats_thresh *signal; |
| wmi_tx_stats_thresh *tx; |
| wmi_rx_stats_thresh *rx; |
| |
| if (thresh->period != LL_STATS_INVALID_PERIOD) { |
| /* |
| * only set period, |
| * otherwise former threshold would be modified. |
| */ |
| if (wmi_unified_pdev_set_param(wma->wmi_handle, |
| WMI_PDEV_PARAM_STATS_OBSERVATION_PERIOD, |
| thresh->period)) |
| WMA_LOGP(FL("Failed to set MAC counter period.")); |
| WMA_LOGD(FL("Mac counter period=%d."), thresh->period); |
| return; |
| } |
| |
| len = sizeof(wmi_pdev_set_stats_threshold_cmd_fixed_param) + |
| sizeof(wmi_chan_cca_stats_thresh) + |
| sizeof(wmi_peer_signal_stats_thresh) + |
| sizeof(wmi_tx_stats_thresh) + |
| sizeof(wmi_rx_stats_thresh) + |
| 5 * WMI_TLV_HDR_SIZE; |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: wmi_buf_alloc failed", __func__); |
| return; |
| } |
| |
| buf_ptr = (u_int8_t *)wmi_buf_data(buf); |
| tag = WMITLV_TAG_STRUC_wmi_pdev_set_stats_threshold_cmd_fixed_param; |
| hdr_len = WMITLV_GET_STRUCT_TLVLEN( |
| wmi_pdev_set_stats_threshold_cmd_fixed_param); |
| WMA_LOGD(FL("Setting fixed parameters. tag=%d, len=%d"), tag, hdr_len); |
| cmd = (wmi_pdev_set_stats_threshold_cmd_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, tag, hdr_len); |
| cmd->enable_thresh = thresh->enable; |
| cmd->use_thresh_bitmap = thresh->enable_bitmap; |
| cmd->gbl_thresh = thresh->global_threshold; |
| cmd->cca_thresh_enable_bitmap = thresh->cca_bitmap; |
| cmd->signal_thresh_enable_bitmap = thresh->signal_bitmap; |
| cmd->tx_thresh_enable_bitmap = thresh->tx_bitmap; |
| cmd->rx_thresh_enable_bitmap = thresh->rx_bitmap; |
| len = sizeof(wmi_pdev_set_stats_threshold_cmd_fixed_param); |
| |
| tag = WMITLV_TAG_STRUC_wmi_chan_cca_stats_thresh, |
| hdr_len = WMITLV_GET_STRUCT_TLVLEN(wmi_chan_cca_stats_thresh); |
| cca = (wmi_chan_cca_stats_thresh *)(buf_ptr + len); |
| WMITLV_SET_HDR(&cca->tlv_header, tag, hdr_len); |
| WMA_LOGD(FL("Setting cca parameters. tag=%d, len=%d"), tag, hdr_len); |
| cca->idle_time = thresh->cca.idle_time; |
| cca->tx_time = thresh->cca.tx_time; |
| cca->rx_in_bss_time = thresh->cca.rx_in_bss_time; |
| cca->rx_out_bss_time = thresh->cca.rx_out_bss_time; |
| cca->rx_busy_time = thresh->cca.rx_busy_time; |
| cca->rx_in_bad_cond_time = thresh->cca.rx_in_bad_cond_time; |
| cca->tx_in_bad_cond_time = thresh->cca.tx_in_bad_cond_time; |
| cca->wlan_not_avail_time = thresh->cca.wlan_not_avail_time; |
| WMA_LOGD(FL("idle time=%d, tx_time=%d, in_bss=%d, out_bss=%d"), |
| cca->idle_time, cca->tx_time, |
| cca->rx_in_bss_time, cca->rx_out_bss_time); |
| WMA_LOGD(FL("rx_busy=%d, rx_bad=%d, tx_bad=%d, not_avail=%d"), |
| cca->rx_busy_time, cca->rx_in_bad_cond_time, |
| cca->tx_in_bad_cond_time, cca->wlan_not_avail_time); |
| len += sizeof(wmi_chan_cca_stats_thresh); |
| |
| signal = (wmi_peer_signal_stats_thresh *)(buf_ptr + len); |
| tag = WMITLV_TAG_STRUC_wmi_peer_signal_stats_thresh; |
| hdr_len = WMITLV_GET_STRUCT_TLVLEN(wmi_peer_signal_stats_thresh); |
| WMA_LOGD(FL("Setting signal parameters. tag=%d, len=%d"), tag, hdr_len); |
| WMITLV_SET_HDR(&signal->tlv_header, tag, hdr_len); |
| signal->per_chain_snr = thresh->signal.snr; |
| signal->per_chain_nf = thresh->signal.nf; |
| WMA_LOGD(FL("snr=%d, nf=%d"), signal->per_chain_snr, |
| signal->per_chain_nf); |
| len += sizeof(wmi_peer_signal_stats_thresh); |
| |
| tx = (wmi_tx_stats_thresh *)(buf_ptr + len); |
| tag = WMITLV_TAG_STRUC_wmi_tx_stats_thresh; |
| hdr_len = WMITLV_GET_STRUCT_TLVLEN(wmi_tx_stats_thresh); |
| WMA_LOGD(FL("Setting TX parameters. tag=%d, len=%d"), tag, len); |
| WMITLV_SET_HDR(&tx->tlv_header, tag, hdr_len); |
| tx->tx_msdu_cnt = thresh->tx.msdu; |
| tx->tx_mpdu_cnt = thresh->tx.mpdu; |
| tx->tx_ppdu_cnt = thresh->tx.ppdu; |
| tx->tx_bytes = thresh->tx.bytes; |
| tx->tx_msdu_drop_cnt = thresh->tx.msdu_drop; |
| tx->tx_drop_bytes = thresh->tx.byte_drop; |
| tx->tx_mpdu_retry_cnt = thresh->tx.mpdu_retry; |
| tx->tx_mpdu_fail_cnt = thresh->tx.mpdu_fail; |
| tx->tx_ppdu_fail_cnt = thresh->tx.ppdu_fail; |
| tx->tx_mpdu_aggr = thresh->tx.aggregation; |
| tx->tx_succ_mcs = thresh->tx.succ_mcs; |
| tx->tx_fail_mcs = thresh->tx.fail_mcs; |
| tx->tx_ppdu_delay = thresh->tx.delay; |
| WMA_LOGD(FL("msdu=%d, mpdu=%d, ppdu=%d, bytes=%d, msdu_drop=%d"), |
| tx->tx_msdu_cnt, tx->tx_mpdu_cnt, tx->tx_ppdu_cnt, |
| tx->tx_bytes, tx->tx_msdu_drop_cnt); |
| WMA_LOGD(FL("byte_drop=%d, mpdu_retry=%d, mpdu_fail=%d, ppdu_fail=%d"), |
| tx->tx_drop_bytes, tx->tx_mpdu_retry_cnt, |
| tx->tx_mpdu_fail_cnt, tx->tx_ppdu_fail_cnt); |
| WMA_LOGD(FL("aggr=%d, succ_mcs=%d, fail_mcs=%d, delay=%d"), |
| tx->tx_mpdu_aggr, tx->tx_succ_mcs, tx->tx_fail_mcs, |
| tx->tx_ppdu_delay); |
| len += sizeof(wmi_tx_stats_thresh); |
| |
| rx = (wmi_rx_stats_thresh *)(buf_ptr + len); |
| tag = WMITLV_TAG_STRUC_wmi_rx_stats_thresh, |
| hdr_len = WMITLV_GET_STRUCT_TLVLEN(wmi_rx_stats_thresh); |
| WMITLV_SET_HDR(&rx->tlv_header, tag, hdr_len); |
| WMA_LOGD(FL("Setting RX parameters. tag=%d, len=%d"), tag, hdr_len); |
| rx->mac_rx_mpdu_cnt = thresh->rx.mpdu; |
| rx->mac_rx_bytes = thresh->rx.bytes; |
| rx->phy_rx_ppdu_cnt = thresh->rx.ppdu; |
| rx->phy_rx_bytes = thresh->rx.ppdu_bytes; |
| rx->rx_disorder_cnt = thresh->rx.disorder; |
| rx->rx_mpdu_retry_cnt = thresh->rx.mpdu_retry; |
| rx->rx_mpdu_dup_cnt = thresh->rx.mpdu_dup; |
| rx->rx_mpdu_discard_cnt = thresh->rx.mpdu_discard; |
| rx->rx_mpdu_aggr = thresh->rx.aggregation; |
| rx->rx_mcs = thresh->rx.mcs; |
| rx->sta_ps_inds = thresh->rx.ps_inds; |
| rx->sta_ps_durs = thresh->rx.ps_durs; |
| rx->rx_probe_reqs = thresh->rx.probe_reqs; |
| rx->rx_oth_mgmts = thresh->rx.other_mgmt; |
| WMA_LOGD(FL("rx_mpdu=%d, rx_bytes=%d, rx_ppdu=%d, rx_pbytes=%d"), |
| rx->mac_rx_mpdu_cnt, rx->mac_rx_bytes, |
| rx->phy_rx_ppdu_cnt, rx->phy_rx_bytes); |
| WMA_LOGD(FL("disorder=%d, rx_dup=%d, rx_aggr=%d, rx_mcs=%d"), |
| rx->rx_disorder_cnt, rx->rx_mpdu_dup_cnt, |
| rx->rx_mpdu_aggr, rx->rx_mcs); |
| WMA_LOGD(FL("rx_ind=%d, rx_dur=%d, rx_probe=%d, rx_mgmt=%d"), |
| rx->sta_ps_inds, rx->sta_ps_durs, |
| rx->rx_probe_reqs, rx->rx_oth_mgmts); |
| len += sizeof(wmi_rx_stats_thresh); |
| |
| WMA_LOGA("WMA --> WMI_PDEV_SET_STATS_THRESHOLD_CMDID(0x%x), length=%d", |
| WMI_PDEV_SET_STATS_THRESHOLD_CMDID, len); |
| if (EOK != wmi_unified_cmd_send(wma->wmi_handle, |
| buf, len, |
| WMI_PDEV_SET_STATS_THRESHOLD_CMDID)) { |
| WMA_LOGE("Failed to send WMI_PDEV_SET_STATS_THRESHOLD_CMDID"); |
| wmi_buf_free(buf); |
| } |
| } |
| #else |
| /** |
| * wma_tx_failure_cb() - TX failure callback |
| * @ctx: txrx context |
| * @num_msdu: number of msdu with the same status |
| * @tid: TID number |
| * @status: failure status |
| * 1: TX packet discarded |
| * 2: No ACK |
| * 3: Postpone |
| */ |
| void wma_tx_failure_cb(void *ctx, uint32_t num_msdu, uint8_t tid, uint32 status) |
| { |
| } |
| #endif /* WLAN_FEATURE_LINK_LAYER_STATS */ |
| |
| /** |
| * wma_unified_power_debug_stats_event_handler() - WMA handler function to |
| * handle Power stats event from firmware |
| * @handle: Pointer to wma handle |
| * @cmd_param_info: Pointer to Power stats event TLV |
| * @len: Length of the cmd_param_info |
| * |
| * Return: 0 on success, error number otherwise |
| */ |
| #ifdef WLAN_POWER_DEBUGFS |
| static int wma_unified_power_debug_stats_event_handler(void *handle, |
| uint8_t *cmd_param_info, uint32_t len) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| WMI_PDEV_CHIP_POWER_STATS_EVENTID_param_tlvs *param_tlvs; |
| struct power_stats_response *power_stats_results; |
| wmi_pdev_chip_power_stats_event_fixed_param *param_buf; |
| uint32_t power_stats_len, stats_registers_len, *debug_registers; |
| |
| tpAniSirGlobal mac = (tpAniSirGlobal)vos_get_context(VOS_MODULE_ID_PE, |
| wma_handle->vos_context); |
| param_tlvs = |
| (WMI_PDEV_CHIP_POWER_STATS_EVENTID_param_tlvs *) cmd_param_info; |
| |
| param_buf = (wmi_pdev_chip_power_stats_event_fixed_param *) |
| param_tlvs->fixed_param; |
| if (!mac || !mac->sme.power_stats_resp_callback) { |
| WMA_LOGD("%s: NULL mac ptr or HDD callback is null", __func__); |
| return -EINVAL; |
| } |
| |
| if (!param_buf) { |
| WMA_LOGD("%s: NULL power stats event fixed param", __func__); |
| return -EINVAL; |
| } |
| |
| if (param_buf->num_debug_register > ((WMA_SVC_MSG_MAX_SIZE - |
| sizeof(wmi_pdev_chip_power_stats_event_fixed_param)) / |
| sizeof(uint32_t))) { |
| WMA_LOGE("excess payload: LEN num_debug_register:%u", |
| param_buf->num_debug_register); |
| return -EINVAL; |
| } |
| |
| debug_registers = param_tlvs->debug_registers; |
| stats_registers_len = |
| (sizeof(uint32_t) * param_buf->num_debug_register); |
| power_stats_len = stats_registers_len + sizeof(*power_stats_results); |
| power_stats_results = vos_mem_malloc(power_stats_len); |
| if (NULL == power_stats_results) { |
| WMA_LOGD("%s: could not allocate mem for power stats results", |
| __func__); |
| return -ENOMEM; |
| } |
| |
| vos_mem_zero(power_stats_results, power_stats_len); |
| WMA_LOGD("Cumulative sleep time %d cumulative total on time %d deep sleep enter counter %d last deep sleep enter tstamp ts %d debug registers fmt %d num debug register %d", |
| param_buf->cumulative_sleep_time_ms, |
| param_buf->cumulative_total_on_time_ms, |
| param_buf->deep_sleep_enter_counter, |
| param_buf->last_deep_sleep_enter_tstamp_ms, |
| param_buf->debug_register_fmt, |
| param_buf->num_debug_register); |
| |
| power_stats_results->cumulative_sleep_time_ms |
| = param_buf->cumulative_sleep_time_ms; |
| power_stats_results->cumulative_total_on_time_ms |
| = param_buf->cumulative_total_on_time_ms; |
| power_stats_results->deep_sleep_enter_counter |
| = param_buf->deep_sleep_enter_counter; |
| power_stats_results->last_deep_sleep_enter_tstamp_ms |
| = param_buf->last_deep_sleep_enter_tstamp_ms; |
| power_stats_results->debug_register_fmt |
| = param_buf->debug_register_fmt; |
| power_stats_results->num_debug_register |
| = param_buf->num_debug_register; |
| |
| power_stats_results->debug_registers |
| = (uint32_t *)(power_stats_results + 1); |
| |
| vos_mem_copy(power_stats_results->debug_registers, |
| debug_registers, stats_registers_len); |
| |
| mac->sme.power_stats_resp_callback(power_stats_results, |
| mac->sme.power_debug_stats_context); |
| vos_mem_free(power_stats_results); |
| return 0; |
| } |
| #else |
| static int wma_unified_power_debug_stats_event_handler(void *handle, |
| uint8_t *cmd_param_info, uint32_t len) |
| { |
| return 0; |
| } |
| #endif |
| |
| |
| static int wma_pdev_div_info_evt_handler(void *handle, u_int8_t *event_buf, |
| u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_PDEV_DIV_RSSI_ANTID_EVENTID_param_tlvs *param_buf; |
| wmi_pdev_div_rssi_antid_event_fixed_param *event; |
| struct chain_rssi_result chain_rssi_result; |
| u_int32_t i; |
| u_int8_t macaddr[IEEE80211_ADDR_LEN]; |
| |
| tpAniSirGlobal pmac = (tpAniSirGlobal)vos_get_context( |
| VOS_MODULE_ID_PE, wma->vos_context); |
| if (!pmac) { |
| WMA_LOGE(FL("Invalid pmac")); |
| return -EINVAL; |
| } |
| |
| param_buf = (WMI_PDEV_DIV_RSSI_ANTID_EVENTID_param_tlvs *) event_buf; |
| if (!param_buf) { |
| WMA_LOGE(FL("Invalid rssi antid event buffer")); |
| return -EINVAL; |
| } |
| |
| event = param_buf->fixed_param; |
| if (!event) { |
| WMA_LOGE(FL("Invalid fixed param")); |
| return -EINVAL; |
| } |
| |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&event->macaddr, macaddr); |
| WMA_LOGD(FL("macaddr: " MAC_ADDRESS_STR), MAC_ADDR_ARRAY(macaddr)); |
| |
| if (event->num_chains_valid > CHAIN_MAX_NUM) { |
| WMA_LOGD("Sizing down the chains no %d to max", |
| event->num_chains_valid); |
| event->num_chains_valid = CHAIN_MAX_NUM; |
| } |
| |
| WMA_LOGD(FL("num_chains_valid: %d"), event->num_chains_valid); |
| chain_rssi_result.num_chains_valid = event->num_chains_valid; |
| |
| for (i = 0; i < CHAIN_MAX_NUM; i++) |
| WMA_LOGD(FL("chain_rssi: %d"), event->chain_rssi[i]); |
| vos_mem_copy(chain_rssi_result.chain_rssi, event->chain_rssi, |
| sizeof(event->chain_rssi)); |
| for (i = 0; i < event->num_chains_valid; i++) |
| chain_rssi_result.chain_rssi[i] += WMA_TGT_NOISE_FLOOR_DBM; |
| |
| for (i = 0; i < CHAIN_MAX_NUM; i++) |
| WMA_LOGD(FL("ant_id: %d"), event->ant_id[i]); |
| vos_mem_copy(chain_rssi_result.ant_id, event->ant_id, |
| sizeof(event->ant_id)); |
| |
| pmac->sme.pchain_rssi_ind_cb(pmac->hHdd, &chain_rssi_result); |
| |
| return 0; |
| } |
| |
| u_int8_t *wma_add_p2p_ie(u_int8_t *frm) |
| { |
| u_int8_t wfa_oui[3] = WMA_P2P_WFA_OUI; |
| struct p2p_ie *p2p_ie=(struct p2p_ie *) frm; |
| |
| p2p_ie->p2p_id = WMA_P2P_IE_ID; |
| p2p_ie->p2p_oui[0] = wfa_oui[0]; |
| p2p_ie->p2p_oui[1] = wfa_oui[1]; |
| p2p_ie->p2p_oui[2] = wfa_oui[2]; |
| p2p_ie->p2p_oui_type = WMA_P2P_WFA_VER; |
| p2p_ie->p2p_len = 4; |
| return (frm + sizeof(struct p2p_ie)); |
| } |
| |
| static void wma_update_beacon_noa_ie( |
| struct beacon_info *bcn, |
| u_int16_t new_noa_sub_ie_len) |
| { |
| struct p2p_ie *p2p_ie; |
| u_int8_t *buf; |
| |
| /* if there is nothing to add, just return */ |
| if (new_noa_sub_ie_len == 0) { |
| if (bcn->noa_sub_ie_len && bcn->noa_ie) { |
| WMA_LOGD("%s: NoA is present in previous beacon, " |
| "but not present in swba event, " |
| "So Reset the NoA", |
| __func__); |
| /* TODO: Assuming p2p noa ie is last ie in the beacon */ |
| vos_mem_zero(bcn->noa_ie, (bcn->noa_sub_ie_len + |
| sizeof(struct p2p_ie)) ); |
| bcn->len -= (bcn->noa_sub_ie_len + |
| sizeof(struct p2p_ie)); |
| bcn->noa_ie = NULL; |
| bcn->noa_sub_ie_len = 0; |
| } |
| WMA_LOGD("%s: No need to update NoA", __func__); |
| return; |
| } |
| |
| if (bcn->noa_sub_ie_len && bcn->noa_ie) { |
| /* NoA present in previous beacon, update it */ |
| WMA_LOGD("%s: NoA present in previous beacon, " |
| "update the NoA IE, bcn->len %u" |
| "bcn->noa_sub_ie_len %u", |
| __func__, bcn->len, bcn->noa_sub_ie_len); |
| bcn->len -= (bcn->noa_sub_ie_len + sizeof(struct p2p_ie)) ; |
| vos_mem_zero(bcn->noa_ie, |
| (bcn->noa_sub_ie_len + sizeof(struct p2p_ie))); |
| } else { /* NoA is not present in previous beacon */ |
| WMA_LOGD("%s: NoA not present in previous beacon, add it" |
| "bcn->len %u", __func__, bcn->len); |
| buf = adf_nbuf_data(bcn->buf); |
| bcn->noa_ie = buf + bcn->len; |
| } |
| |
| bcn->noa_sub_ie_len = new_noa_sub_ie_len; |
| wma_add_p2p_ie(bcn->noa_ie); |
| p2p_ie = (struct p2p_ie *) bcn->noa_ie; |
| p2p_ie->p2p_len += new_noa_sub_ie_len; |
| vos_mem_copy((bcn->noa_ie + sizeof(struct p2p_ie)), bcn->noa_sub_ie, |
| new_noa_sub_ie_len); |
| |
| bcn->len += (new_noa_sub_ie_len + sizeof(struct p2p_ie)); |
| WMA_LOGI("%s: Updated beacon length with NoA Ie is %u", |
| __func__, bcn->len); |
| } |
| |
| static void wma_p2p_create_sub_ie_noa( |
| u_int8_t *buf, |
| struct p2p_sub_element_noa *noa, |
| u_int16_t *new_noa_sub_ie_len) |
| { |
| u_int8_t tmp_octet = 0; |
| int i; |
| u_int8_t *buf_start = buf; |
| |
| *buf++ = WMA_P2P_SUB_ELEMENT_NOA; /* sub-element id */ |
| ASSERT(noa->num_descriptors <= WMA_MAX_NOA_DESCRIPTORS); |
| |
| /* |
| * Length = (2 octets for Index and CTWin/Opp PS) and |
| * (13 octets for each NOA Descriptors) |
| */ |
| P2PIE_PUT_LE16(buf, WMA_NOA_IE_SIZE(noa->num_descriptors)); |
| buf += 2; |
| |
| *buf++ = noa->index; /* Instance Index */ |
| |
| tmp_octet = noa->ctwindow & WMA_P2P_NOA_IE_CTWIN_MASK; |
| if (noa->oppPS) { |
| tmp_octet |= WMA_P2P_NOA_IE_OPP_PS_SET; |
| } |
| *buf++ = tmp_octet; /* Opp Ps and CTWin capabilities */ |
| |
| for (i = 0; i < noa->num_descriptors; i++) { |
| ASSERT(noa->noa_descriptors[i].type_count != 0); |
| |
| *buf++ = noa->noa_descriptors[i].type_count; |
| |
| P2PIE_PUT_LE32(buf, noa->noa_descriptors[i].duration); |
| buf += 4; |
| P2PIE_PUT_LE32(buf, noa->noa_descriptors[i].interval); |
| buf += 4; |
| P2PIE_PUT_LE32(buf, noa->noa_descriptors[i].start_time); |
| buf += 4; |
| } |
| *new_noa_sub_ie_len = (buf - buf_start); |
| } |
| |
| static void wma_update_noa(struct beacon_info *beacon, |
| struct p2p_sub_element_noa *noa_ie) |
| { |
| u_int16_t new_noa_sub_ie_len; |
| |
| /* Call this function by holding the spinlock on beacon->lock */ |
| |
| if (noa_ie) { |
| if ((noa_ie->ctwindow == 0) && (noa_ie->oppPS == 0) && |
| (noa_ie->num_descriptors == 0)) { |
| /* NoA is not present */ |
| WMA_LOGD("%s: NoA is not present", __func__); |
| new_noa_sub_ie_len = 0; |
| } |
| else { |
| /* Create the binary blob containing NOA sub-IE */ |
| WMA_LOGD("%s: Create NOA sub ie", __func__); |
| wma_p2p_create_sub_ie_noa(&beacon->noa_sub_ie[0], |
| noa_ie, &new_noa_sub_ie_len); |
| } |
| } |
| else { |
| WMA_LOGD("%s: No need to add NOA", __func__); |
| new_noa_sub_ie_len = 0; /* no NOA IE sub-attributes */ |
| } |
| |
| wma_update_beacon_noa_ie(beacon, new_noa_sub_ie_len); |
| } |
| |
| static void wma_update_probe_resp_noa(tp_wma_handle wma_handle, |
| struct p2p_sub_element_noa *noa_ie) |
| { |
| tSirP2PNoaAttr *noa_attr = (tSirP2PNoaAttr *) vos_mem_malloc(sizeof(tSirP2PNoaAttr)); |
| if (!noa_attr) { |
| WMA_LOGE("Failed to allocate memory for tSirP2PNoaAttr"); |
| return; |
| } |
| |
| vos_mem_zero(noa_attr, sizeof(tSirP2PNoaAttr)); |
| |
| noa_attr->index = noa_ie->index; |
| noa_attr->oppPsFlag = noa_ie->oppPS; |
| noa_attr->ctWin = noa_ie->ctwindow; |
| if (!noa_ie->num_descriptors) { |
| WMA_LOGD("Zero NoA descriptors"); |
| } |
| else { |
| noa_attr->uNoa1IntervalCnt = |
| noa_ie->noa_descriptors[0].type_count; |
| noa_attr->uNoa1Duration = |
| noa_ie->noa_descriptors[0].duration; |
| noa_attr->uNoa1Interval = |
| noa_ie->noa_descriptors[0].interval; |
| noa_attr->uNoa1StartTime = |
| noa_ie->noa_descriptors[0].start_time; |
| if (noa_ie->num_descriptors > 1) { |
| noa_attr->uNoa2IntervalCnt = |
| noa_ie->noa_descriptors[1].type_count; |
| noa_attr->uNoa2Duration = |
| noa_ie->noa_descriptors[1].duration; |
| noa_attr->uNoa2Interval = |
| noa_ie->noa_descriptors[1].interval; |
| noa_attr->uNoa2StartTime = |
| noa_ie->noa_descriptors[1].start_time; |
| } |
| } |
| wma_send_msg(wma_handle, SIR_HAL_P2P_NOA_ATTR_IND, (void *)noa_attr, |
| 0); |
| } |
| |
| void wma_ignore_radar_soon_after_assoc(void) |
| { |
| void *vos_context; |
| tp_wma_handle wma; |
| struct ieee80211com *ic = NULL; |
| struct ath_dfs *dfs = NULL; |
| |
| vos_context = vos_get_global_context(VOS_MODULE_ID_VOSS, NULL); |
| if (!vos_context) { |
| WMA_LOGE("%s: VOS context is invald!", __func__); |
| return; |
| } |
| |
| wma = (tp_wma_handle)vos_get_context(VOS_MODULE_ID_WDA, |
| vos_context); |
| |
| if (!wma) { |
| WMA_LOGE("%s: WMA context is invald!", __func__); |
| return; |
| } |
| |
| ic = wma->dfs_ic; |
| if (ic && ic->ic_dfs) { |
| dfs = (struct ath_dfs *)ic->ic_dfs; |
| dfs->ath_radar_ignore_after_assoc = true; |
| vos_timer_start(&dfs->ath_dfs_radar_ignore_timer, |
| DFS_RADAR_IGNORE); |
| } |
| } |
| |
| void wma_stop_radar_delay_timer(void) |
| { |
| void *vos_context; |
| tp_wma_handle wma; |
| struct ieee80211com *ic = NULL; |
| struct ath_dfs *dfs = NULL; |
| |
| vos_context = vos_get_global_context(VOS_MODULE_ID_VOSS, NULL); |
| if (!vos_context) { |
| WMA_LOGE("%s: VOS context is invald!", __func__); |
| return; |
| } |
| |
| wma = (tp_wma_handle)vos_get_context(VOS_MODULE_ID_WDA, |
| vos_context); |
| |
| if (!wma) { |
| WMA_LOGE("%s: WMA context is invald!", __func__); |
| return; |
| } |
| |
| ic = wma->dfs_ic; |
| if (ic && ic->ic_dfs) { |
| dfs = (struct ath_dfs *)ic->ic_dfs; |
| if (dfs->ath_radar_delaysched) { |
| wma_update_dfs_cac_block_tx(false); |
| vos_timer_stop(&dfs->ath_dfs_radar_delay_timer); |
| dfs->ath_radar_delaysched = 0; |
| } |
| } |
| } |
| |
| static void wma_send_bcn_buf_ll(tp_wma_handle wma, |
| ol_txrx_pdev_handle pdev, |
| u_int8_t vdev_id, |
| WMI_HOST_SWBA_EVENTID_param_tlvs *param_buf) |
| { |
| wmi_bcn_send_from_host_cmd_fixed_param *cmd; |
| struct ieee80211_frame *wh; |
| struct beacon_info *bcn; |
| wmi_tim_info *tim_info = param_buf->tim_info; |
| u_int8_t *bcn_payload; |
| wmi_buf_t wmi_buf; |
| a_status_t ret; |
| struct beacon_tim_ie *tim_ie; |
| wmi_p2p_noa_info *p2p_noa_info = param_buf->p2p_noa_info; |
| struct p2p_sub_element_noa noa_ie; |
| u_int8_t i; |
| int status; |
| |
| bcn = wma->interfaces[vdev_id].beacon; |
| if (!bcn->buf) { |
| WMA_LOGE("%s: Invalid beacon buffer", __func__); |
| return; |
| } |
| if (WMI_UNIFIED_NOA_ATTR_NUM_DESC_GET(p2p_noa_info) > |
| WMI_P2P_MAX_NOA_DESCRIPTORS) { |
| WMA_LOGE("%s: Too many descriptors %d", __func__, |
| WMI_UNIFIED_NOA_ATTR_NUM_DESC_GET(p2p_noa_info)); |
| return; |
| } |
| |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, sizeof(*cmd)); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return; |
| } |
| |
| adf_os_spin_lock_bh(&bcn->lock); |
| |
| bcn_payload = adf_nbuf_data(bcn->buf); |
| |
| tim_ie = (struct beacon_tim_ie *)(&bcn_payload[bcn->tim_ie_offset]); |
| |
| if(tim_info->tim_changed) { |
| if(tim_info->tim_num_ps_pending) |
| vos_mem_copy(&tim_ie->tim_bitmap, tim_info->tim_bitmap, |
| WMA_TIM_SUPPORTED_PVB_LENGTH); |
| else |
| vos_mem_zero(&tim_ie->tim_bitmap, |
| WMA_TIM_SUPPORTED_PVB_LENGTH); |
| /* |
| * Currently we support fixed number of |
| * peers as limited by HAL_NUM_STA. |
| * tim offset is always 0 |
| */ |
| tim_ie->tim_bitctl = 0; |
| } |
| |
| /* Update DTIM Count */ |
| if (tim_ie->dtim_count == 0) |
| tim_ie->dtim_count = tim_ie->dtim_period - 1; |
| else |
| tim_ie->dtim_count--; |
| |
| /* |
| * DTIM count needs to be backedup so that |
| * when umac updates the beacon template |
| * current dtim count can be updated properly |
| */ |
| bcn->dtim_count = tim_ie->dtim_count; |
| |
| /* update state for buffered multicast frames on DTIM */ |
| if (tim_info->tim_mcast && (tim_ie->dtim_count == 0 || |
| tim_ie->dtim_period == 1)) |
| tim_ie->tim_bitctl |= 1; |
| else |
| tim_ie->tim_bitctl &= ~1; |
| |
| /* To avoid sw generated frame sequence the same as H/W generated frame, |
| * the value lower than min_sw_seq is reserved for HW generated frame */ |
| if ((bcn->seq_no & IEEE80211_SEQ_MASK) < MIN_SW_SEQ) |
| bcn->seq_no = MIN_SW_SEQ; |
| |
| wh = (struct ieee80211_frame *) bcn_payload; |
| *(u_int16_t *)&wh->i_seq[0] = htole16(bcn->seq_no |
| << IEEE80211_SEQ_SEQ_SHIFT); |
| bcn->seq_no++; |
| |
| if (WMI_UNIFIED_NOA_ATTR_IS_MODIFIED(p2p_noa_info)) { |
| vos_mem_zero(&noa_ie, sizeof(noa_ie)); |
| |
| noa_ie.index = (u_int8_t)WMI_UNIFIED_NOA_ATTR_INDEX_GET(p2p_noa_info); |
| noa_ie.oppPS = (u_int8_t)WMI_UNIFIED_NOA_ATTR_OPP_PS_GET(p2p_noa_info); |
| noa_ie.ctwindow = (u_int8_t)WMI_UNIFIED_NOA_ATTR_CTWIN_GET(p2p_noa_info); |
| noa_ie.num_descriptors = (u_int8_t)WMI_UNIFIED_NOA_ATTR_NUM_DESC_GET( |
| p2p_noa_info); |
| WMA_LOGI("%s: index %u, oppPs %u, ctwindow %u, " |
| "num_descriptors = %u", __func__, noa_ie.index, |
| noa_ie.oppPS, noa_ie.ctwindow, noa_ie.num_descriptors); |
| for(i = 0; i < noa_ie.num_descriptors; i++) { |
| noa_ie.noa_descriptors[i].type_count = |
| (u_int8_t)p2p_noa_info->noa_descriptors[i].type_count; |
| noa_ie.noa_descriptors[i].duration = |
| p2p_noa_info->noa_descriptors[i].duration; |
| noa_ie.noa_descriptors[i].interval = |
| p2p_noa_info->noa_descriptors[i].interval; |
| noa_ie.noa_descriptors[i].start_time = |
| p2p_noa_info->noa_descriptors[i].start_time; |
| WMA_LOGI("%s: NoA descriptor[%d] type_count %u, " |
| "duration %u, interval %u, start_time = %u", |
| __func__, i, |
| noa_ie.noa_descriptors[i].type_count, |
| noa_ie.noa_descriptors[i].duration, |
| noa_ie.noa_descriptors[i].interval, |
| noa_ie.noa_descriptors[i].start_time); |
| } |
| wma_update_noa(bcn, &noa_ie); |
| |
| /* Send a msg to LIM to update the NoA IE in probe response |
| * frames transmitted by the host */ |
| wma_update_probe_resp_noa(wma, &noa_ie); |
| } |
| |
| if (bcn->dma_mapped) { |
| adf_nbuf_unmap_single(pdev->osdev, bcn->buf, |
| ADF_OS_DMA_TO_DEVICE); |
| bcn->dma_mapped = 0; |
| } |
| ret = adf_nbuf_map_single(pdev->osdev, bcn->buf, |
| ADF_OS_DMA_TO_DEVICE); |
| if (ret != A_STATUS_OK) { |
| wmi_buf_free(wmi_buf); |
| WMA_LOGE("%s: failed map beacon buf to DMA region", |
| __func__); |
| adf_os_spin_unlock_bh(&bcn->lock); |
| return; |
| } |
| |
| bcn->dma_mapped = 1; |
| cmd = (wmi_bcn_send_from_host_cmd_fixed_param *) wmi_buf_data(wmi_buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_bcn_send_from_host_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_bcn_send_from_host_cmd_fixed_param)); |
| cmd->vdev_id = vdev_id; |
| cmd->data_len = bcn->len; |
| cmd->frame_ctrl = *((A_UINT16 *)wh->i_fc); |
| cmd->frag_ptr = adf_nbuf_get_frag_paddr_lo(bcn->buf, 0); |
| |
| /* Notify Firmware of DTM and mcast/bcast traffic */ |
| if (tim_ie->dtim_count == 0) { |
| cmd->dtim_flag |= WMI_BCN_SEND_DTIM_ZERO; |
| /* deliver mcast/bcast traffic in next DTIM beacon */ |
| if (tim_ie->tim_bitctl & 0x01) |
| cmd->dtim_flag |= WMI_BCN_SEND_DTIM_BITCTL_SET; |
| } |
| |
| status = wmi_unified_cmd_send(wma->wmi_handle, wmi_buf, sizeof(*cmd), |
| WMI_PDEV_SEND_BCN_CMDID); |
| |
| if (status != EOK) { |
| WMA_LOGE("Failed to send WMI_PDEV_SEND_BCN_CMDID command"); |
| wmi_buf_free(wmi_buf); |
| } |
| adf_os_spin_unlock_bh(&bcn->lock); |
| } |
| |
| static int wma_beacon_swba_handler(void *handle, u_int8_t *event, u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_HOST_SWBA_EVENTID_param_tlvs *param_buf; |
| wmi_host_swba_event_fixed_param *swba_event; |
| u_int32_t vdev_map; |
| ol_txrx_pdev_handle pdev; |
| u_int8_t vdev_id = 0; |
| |
| param_buf = (WMI_HOST_SWBA_EVENTID_param_tlvs *) event; |
| if (!param_buf) { |
| WMA_LOGE("Invalid swba event buffer"); |
| return -EINVAL; |
| } |
| swba_event = param_buf->fixed_param; |
| vdev_map = swba_event->vdev_map; |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| if (!pdev) { |
| WMA_LOGE("%s: pdev is NULL", __func__); |
| return -EINVAL; |
| } |
| |
| WMA_LOGD("vdev_map = %d", vdev_map); |
| for (; vdev_map && vdev_id < wma->max_bssid; |
| vdev_id++, vdev_map >>= 1) { |
| if (!(vdev_map & 0x1)) |
| continue; |
| if (!wdi_out_cfg_is_high_latency(pdev->ctrl_pdev)) |
| wma_send_bcn_buf_ll(wma, pdev, vdev_id, param_buf); |
| break; |
| } |
| return 0; |
| } |
| |
| static int wma_csa_offload_handler(void *handle, u_int8_t *event, u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle)handle; |
| WMI_CSA_HANDLING_EVENTID_param_tlvs *param_buf; |
| wmi_csa_event_fixed_param *csa_event; |
| u_int8_t bssid[IEEE80211_ADDR_LEN]; |
| u_int8_t vdev_id = 0; |
| u_int8_t cur_chan = 0; |
| uint8_t cur_sb20_channelwidth = 0; |
| struct ieee80211_channelswitch_ie *csa_ie; |
| tpCSAOffloadParams csa_offload_event; |
| struct ieee80211_extendedchannelswitch_ie *xcsa_ie; |
| struct ieee80211_ie_wide_bw_switch *wb_ie; |
| struct wma_txrx_node *intr = wma->interfaces; |
| |
| param_buf = (WMI_CSA_HANDLING_EVENTID_param_tlvs *) event; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| if (!param_buf) { |
| WMA_LOGE("Invalid csa event buffer"); |
| return -EINVAL; |
| } |
| csa_event = param_buf->fixed_param; |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&csa_event->i_addr2, &bssid[0]); |
| |
| if (wma_find_vdev_by_bssid(wma, bssid, &vdev_id) == NULL) { |
| WMA_LOGE("Invalid bssid received %s:%d", __func__, __LINE__); |
| return -EINVAL; |
| } |
| |
| csa_offload_event = vos_mem_malloc(sizeof(*csa_offload_event)); |
| if (!csa_offload_event) { |
| WMA_LOGE("VOS MEM Alloc Failed for csa_offload_event"); |
| return -EINVAL; |
| } |
| |
| vos_mem_zero(csa_offload_event, sizeof(*csa_offload_event)); |
| vos_mem_copy(csa_offload_event->bssId, &bssid, ETH_ALEN); |
| |
| if (csa_event->ies_present_flag & WMI_CSA_IE_PRESENT) { |
| csa_ie = (struct ieee80211_channelswitch_ie *)(&csa_event->csa_ie[0]); |
| csa_offload_event->channel = csa_ie->newchannel; |
| csa_offload_event->switchmode = csa_ie->switchmode; |
| } else if (csa_event->ies_present_flag & WMI_XCSA_IE_PRESENT) { |
| xcsa_ie = (struct ieee80211_extendedchannelswitch_ie*)(&csa_event->xcsa_ie[0]); |
| csa_offload_event->channel = xcsa_ie->newchannel; |
| csa_offload_event->switchmode = xcsa_ie->switchmode; |
| csa_offload_event->new_op_class = xcsa_ie->newClass; |
| } else { |
| WMA_LOGE("CSA Event error: No CSA IE present"); |
| vos_mem_free(csa_offload_event); |
| return -EINVAL; |
| } |
| |
| if (csa_event->ies_present_flag & WMI_WBW_IE_PRESENT) { |
| wb_ie = (struct ieee80211_ie_wide_bw_switch*)(&csa_event->wb_ie[0]); |
| csa_offload_event->new_ch_width = wb_ie->new_ch_width; |
| csa_offload_event->new_ch_freq_seg1 = wb_ie->new_ch_freq_seg1; |
| csa_offload_event->new_ch_freq_seg2 = wb_ie->new_ch_freq_seg2; |
| } |
| |
| if (csa_event->ies_present_flag & WMI_QSBW_ISE_PRESENT) { |
| struct vendor_ie_sub20_channelwidth sub20width_ie; |
| |
| sub20width_ie.elem_id = |
| WMI_CSA_EVENT_QSBW_ISE_EXTRACT_ID( |
| csa_event->qsbw_ise); |
| sub20width_ie.elem_len = |
| WMI_CSA_EVENT_QSBW_ISE_EXTRACT_LEN( |
| csa_event->qsbw_ise); |
| sub20width_ie.sub20_capability = |
| WMI_CSA_EVENT_QSBW_ISE_EXTRACT_CAP( |
| csa_event->qsbw_ise); |
| sub20width_ie.new_sub20_channelwidth = |
| WMI_CSA_EVENT_QSBW_ISE_EXTRACT_NOTIF( |
| csa_event->qsbw_ise); |
| |
| WMA_LOGE("CSA event with sbw_ie capability: %d chwidth:%d", |
| sub20width_ie.sub20_capability, |
| sub20width_ie.new_sub20_channelwidth); |
| csa_offload_event->new_sub20_channelwidth = |
| sub20width_ie.new_sub20_channelwidth; |
| } |
| |
| csa_offload_event->ies_present_flag = csa_event->ies_present_flag; |
| |
| WMA_LOGD("CSA: New Channel = %d BSSID:%pM", |
| csa_offload_event->channel, |
| csa_offload_event->bssId); |
| |
| cur_chan = vos_freq_to_chan(intr[vdev_id].mhz); |
| |
| cur_sb20_channelwidth = |
| vos_phy_channel_width_to_sub20(intr[vdev_id].channelwidth); |
| /* |
| * basic sanity check: requested channel should not be 0 |
| * and equal to home channel |
| */ |
| if( (0 == csa_offload_event->channel) || |
| (cur_chan == csa_offload_event->channel && |
| cur_sb20_channelwidth == |
| csa_offload_event->new_sub20_channelwidth)) { |
| WMA_LOGE("CSA Event with channel %d. Ignore !!", |
| csa_offload_event->channel); |
| vos_mem_free(csa_offload_event); |
| return -EINVAL; |
| } |
| wma->interfaces[vdev_id].is_channel_switch = VOS_TRUE; |
| wma_send_msg(wma, WDA_CSA_OFFLOAD_EVENT, (void *)csa_offload_event, 0); |
| return 0; |
| } |
| |
| #ifdef WLAN_FEATURE_GTK_OFFLOAD |
| static int wma_gtk_offload_status_event(void *handle, u_int8_t *event, |
| u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle)handle; |
| WMI_GTK_OFFLOAD_STATUS_EVENT_fixed_param *status; |
| WMI_GTK_OFFLOAD_STATUS_EVENTID_param_tlvs *param_buf; |
| tpSirGtkOffloadGetInfoRspParams resp; |
| vos_msg_t vos_msg; |
| u_int8_t *bssid; |
| |
| WMA_LOGD("%s Enter", __func__); |
| |
| param_buf = (WMI_GTK_OFFLOAD_STATUS_EVENTID_param_tlvs *)event; |
| if (!param_buf) { |
| WMA_LOGE("param_buf is NULL"); |
| return -EINVAL; |
| } |
| |
| status = (WMI_GTK_OFFLOAD_STATUS_EVENT_fixed_param *)param_buf->fixed_param; |
| |
| if (len < sizeof(WMI_GTK_OFFLOAD_STATUS_EVENT_fixed_param)) { |
| WMA_LOGE("Invalid length for GTK status"); |
| return -EINVAL; |
| } |
| bssid = wma_find_bssid_by_vdev_id(wma, status->vdev_id); |
| if (!bssid) { |
| WMA_LOGE("invalid bssid for vdev id %d", status->vdev_id); |
| return -ENOENT; |
| } |
| |
| resp = vos_mem_malloc(sizeof(*resp)); |
| if (!resp) { |
| WMA_LOGE("%s: Failed to alloc response", __func__); |
| return -ENOMEM; |
| } |
| vos_mem_zero(resp, sizeof(*resp)); |
| resp->mesgType = eWNI_PMC_GTK_OFFLOAD_GETINFO_RSP; |
| resp->mesgLen = sizeof(*resp); |
| resp->ulStatus = VOS_STATUS_SUCCESS; |
| resp->ulTotalRekeyCount = status->refresh_cnt; |
| /* TODO: Is the total rekey count and GTK rekey count same? */ |
| resp->ulGTKRekeyCount = status->refresh_cnt; |
| |
| vos_mem_copy(&resp->ullKeyReplayCounter, &status->replay_counter, |
| GTK_REPLAY_COUNTER_BYTES); |
| |
| vos_mem_copy(resp->bssId, bssid, ETH_ALEN); |
| |
| #ifdef IGTK_OFFLOAD |
| /* TODO: Is the refresh count same for GTK and IGTK? */ |
| resp->ulIGTKRekeyCount = status->refresh_cnt; |
| #endif |
| |
| vos_msg.type = eWNI_PMC_GTK_OFFLOAD_GETINFO_RSP; |
| vos_msg.bodyptr = (void *)resp; |
| vos_msg.bodyval = 0; |
| |
| if (vos_mq_post_message(VOS_MQ_ID_SME, (vos_msg_t*)&vos_msg) |
| != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to post GTK response to SME"); |
| vos_mem_free(resp); |
| return -EINVAL; |
| } |
| |
| WMA_LOGD("GTK: got target status with replay counter " |
| "%02x%02x%02x%02x%02x%02x%02x%02x. vdev %d " |
| "Refresh GTK %d times exchanges since last set operation", |
| status->replay_counter[0], |
| status->replay_counter[1], |
| status->replay_counter[2], |
| status->replay_counter[3], |
| status->replay_counter[4], |
| status->replay_counter[5], |
| status->replay_counter[6], |
| status->replay_counter[7], |
| status->vdev_id, status->refresh_cnt); |
| |
| WMA_LOGD("%s Exit", __func__); |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef FEATURE_OEM_DATA_SUPPORT |
| static int wma_oem_capability_event_callback(void *handle, |
| u_int8_t *datap, u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_OEM_CAPABILITY_EVENTID_param_tlvs *param_buf; |
| u_int8_t *data; |
| u_int32_t datalen; |
| u_int32_t *msg_subtype; |
| tStartOemDataRsp *pStartOemDataRsp; |
| |
| param_buf = (WMI_OEM_CAPABILITY_EVENTID_param_tlvs *)datap; |
| if (!param_buf) { |
| WMA_LOGE("%s: Received NULL buf ptr from FW", __func__); |
| return -ENOMEM; |
| } |
| |
| data = param_buf->data; |
| datalen = param_buf->num_data; |
| |
| if (!data) { |
| WMA_LOGE("%s: Received NULL data from FW", __func__); |
| return -EINVAL; |
| } |
| |
| /* |
| * wma puts 4 bytes prefix for msg subtype, so length |
| * of data received from target should be 4 bytes less |
| * then max allowed |
| */ |
| if (datalen <= 0 || |
| datalen > (OEM_DATA_RSP_SIZE - OEM_MESSAGE_SUBTYPE_LEN)) { |
| WMA_LOGE(FL("Invalid data length: %d"), datalen); |
| return -EINVAL; |
| } |
| |
| pStartOemDataRsp = vos_mem_malloc(sizeof(*pStartOemDataRsp)); |
| if (!pStartOemDataRsp) { |
| WMA_LOGE("%s: Failed to alloc pStartOemDataRsp", __func__); |
| return -ENOMEM; |
| } |
| |
| pStartOemDataRsp->rsp_len = datalen + OEM_MESSAGE_SUBTYPE_LEN; |
| pStartOemDataRsp->oem_data_rsp = |
| vos_mem_malloc(pStartOemDataRsp->rsp_len); |
| if (!pStartOemDataRsp->oem_data_rsp) { |
| WMA_LOGE(FL("malloc failed for data")); |
| vos_mem_free(pStartOemDataRsp); |
| return -ENOMEM; |
| } |
| |
| pStartOemDataRsp->target_rsp = true; |
| msg_subtype = (uint32_t *) pStartOemDataRsp->oem_data_rsp; |
| *msg_subtype = WMI_OEM_CAPABILITY_RSP; |
| /* copy data after msg sub type */ |
| vos_mem_copy(pStartOemDataRsp->oem_data_rsp + OEM_MESSAGE_SUBTYPE_LEN, |
| data, datalen); |
| |
| WMA_LOGI(FL("Sending WDA_START_OEM_DATA_RSP, data len (%d)"), |
| pStartOemDataRsp->rsp_len); |
| |
| wma_send_msg(wma, WDA_START_OEM_DATA_RSP, (void *)pStartOemDataRsp, 0); |
| return 0; |
| } |
| |
| static int wma_oem_measurement_report_event_callback(void *handle, |
| u_int8_t *datap, u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_OEM_MEASUREMENT_REPORT_EVENTID_param_tlvs *param_buf; |
| u_int8_t *data; |
| u_int32_t datalen; |
| u_int32_t *msg_subtype; |
| tStartOemDataRsp *pStartOemDataRsp; |
| |
| param_buf = (WMI_OEM_MEASUREMENT_REPORT_EVENTID_param_tlvs *)datap; |
| if (!param_buf) { |
| WMA_LOGE("%s: Received NULL buf ptr from FW", __func__); |
| return -ENOMEM; |
| } |
| |
| data = param_buf->data; |
| datalen = param_buf->num_data; |
| |
| if (!data) { |
| WMA_LOGE("%s: Received NULL data from FW", __func__); |
| return -EINVAL; |
| } |
| |
| /* |
| * wma puts 4 bytes prefix for msg subtype, so length |
| * of data received from target should be 4 bytes less |
| * then max allowed |
| */ |
| if (datalen <= 0 || |
| datalen > (OEM_DATA_RSP_SIZE - OEM_MESSAGE_SUBTYPE_LEN)) { |
| WMA_LOGE(FL("Invalid data length: %d"), datalen); |
| return -EINVAL; |
| } |
| |
| pStartOemDataRsp = vos_mem_malloc(sizeof(*pStartOemDataRsp)); |
| if (!pStartOemDataRsp) { |
| WMA_LOGE("%s: Failed to alloc pStartOemDataRsp", __func__); |
| return -ENOMEM; |
| } |
| |
| pStartOemDataRsp->rsp_len = datalen + OEM_MESSAGE_SUBTYPE_LEN; |
| pStartOemDataRsp->oem_data_rsp = |
| vos_mem_malloc(pStartOemDataRsp->rsp_len); |
| if (!pStartOemDataRsp->oem_data_rsp) { |
| WMA_LOGE(FL("malloc failed for data")); |
| vos_mem_free(pStartOemDataRsp); |
| return -ENOMEM; |
| } |
| |
| pStartOemDataRsp->target_rsp = true; |
| msg_subtype = (uint32_t *) pStartOemDataRsp->oem_data_rsp; |
| *msg_subtype = WMI_OEM_MEASUREMENT_RSP; |
| /* copy data after msg sub type */ |
| vos_mem_copy(pStartOemDataRsp->oem_data_rsp + OEM_MESSAGE_SUBTYPE_LEN, |
| data, datalen); |
| |
| WMA_LOGI(FL("Sending WDA_START_OEM_DATA_RSP, data len (%d)"), |
| pStartOemDataRsp->rsp_len); |
| |
| wma_send_msg(wma, WDA_START_OEM_DATA_RSP, (void *)pStartOemDataRsp, 0); |
| return 0; |
| } |
| |
| static int wma_oem_error_report_event_callback(void *handle, |
| u_int8_t *datap, u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_OEM_ERROR_REPORT_EVENTID_param_tlvs *param_buf; |
| u_int8_t *data; |
| u_int32_t datalen; |
| u_int32_t *msg_subtype; |
| tStartOemDataRsp *pStartOemDataRsp; |
| |
| param_buf = (WMI_OEM_ERROR_REPORT_EVENTID_param_tlvs *)datap; |
| if (!param_buf) { |
| WMA_LOGE("%s: Received NULL buf ptr from FW", __func__); |
| return -ENOMEM; |
| } |
| |
| data = param_buf->data; |
| datalen = param_buf->num_data; |
| |
| if (!data) { |
| WMA_LOGE("%s: Received NULL data from FW", __func__); |
| return -EINVAL; |
| } |
| |
| /* |
| * wma puts 4 bytes prefix for msg subtype, so length |
| * of data received from target should be 4 bytes less |
| * then max allowed |
| */ |
| if (datalen <= 0 || |
| datalen > (OEM_DATA_RSP_SIZE - OEM_MESSAGE_SUBTYPE_LEN)) { |
| WMA_LOGE(FL("Invalid data length: %d"), datalen); |
| return -EINVAL; |
| } |
| |
| pStartOemDataRsp = vos_mem_malloc(sizeof(*pStartOemDataRsp)); |
| if (!pStartOemDataRsp) { |
| WMA_LOGE("%s: Failed to alloc pStartOemDataRsp", __func__); |
| return -ENOMEM; |
| } |
| |
| pStartOemDataRsp->rsp_len = datalen + OEM_MESSAGE_SUBTYPE_LEN; |
| pStartOemDataRsp->oem_data_rsp = |
| vos_mem_malloc(pStartOemDataRsp->rsp_len); |
| if (!pStartOemDataRsp->oem_data_rsp) { |
| WMA_LOGE(FL("malloc failed for data")); |
| vos_mem_free(pStartOemDataRsp); |
| return -ENOMEM; |
| } |
| |
| pStartOemDataRsp->target_rsp = true; |
| msg_subtype = (uint32_t *) pStartOemDataRsp->oem_data_rsp; |
| *msg_subtype = WMI_OEM_ERROR_REPORT_RSP; |
| /* copy data after msg sub type */ |
| vos_mem_copy(pStartOemDataRsp->oem_data_rsp + OEM_MESSAGE_SUBTYPE_LEN, |
| data, datalen); |
| |
| WMA_LOGI(FL("Sending WDA_START_OEM_DATA_RSP, data len (%d)"), |
| pStartOemDataRsp->rsp_len); |
| |
| wma_send_msg(wma, WDA_START_OEM_DATA_RSP, (void *)pStartOemDataRsp, 0); |
| return 0; |
| } |
| |
| |
| /** |
| * wma_oem_data_response_handler() - OEM data response event handler |
| * @handle: wma handle |
| * @datap: data ptr |
| * @len: data length |
| * |
| * Return: 0 for success or error code |
| */ |
| static int wma_oem_data_response_handler(void *handle, |
| uint8_t *datap, uint32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_OEM_RESPONSE_EVENTID_param_tlvs *param_buf; |
| uint8_t *data; |
| uint32_t datalen; |
| tStartOemDataRsp *oem_rsp; |
| |
| param_buf = (WMI_OEM_RESPONSE_EVENTID_param_tlvs *) datap; |
| if (!param_buf) { |
| WMA_LOGE(FL("Received NULL buf ptr from FW")); |
| return -ENOMEM; |
| } |
| |
| data = param_buf->data; |
| datalen = param_buf->num_data; |
| |
| if (!data) { |
| WMA_LOGE(FL("Received NULL data from FW")); |
| return -EINVAL; |
| } |
| |
| if (datalen <= 0 || datalen > OEM_DATA_RSP_SIZE) { |
| WMA_LOGE(FL("Invalid data length: %d"), datalen); |
| return -EINVAL; |
| } |
| |
| oem_rsp = vos_mem_malloc(sizeof(*oem_rsp)); |
| if (!oem_rsp) { |
| WMA_LOGE(FL("Failed to alloc oem_rsp")); |
| return -ENOMEM; |
| } |
| |
| oem_rsp->rsp_len = datalen; |
| oem_rsp->oem_data_rsp = vos_mem_malloc(oem_rsp->rsp_len); |
| if (!oem_rsp->rsp_len) { |
| WMA_LOGE(FL("malloc failed for data")); |
| vos_mem_free(oem_rsp); |
| return -ENOMEM; |
| } |
| |
| oem_rsp->target_rsp = true; |
| vos_mem_copy(oem_rsp->oem_data_rsp, data, datalen); |
| |
| WMA_LOGI(FL("Sending WMA_START_OEM_DATA_RSP, data len %d"), datalen); |
| |
| wma_send_msg(wma, WDA_START_OEM_DATA_RSP, (void *)oem_rsp, 0); |
| return 0; |
| } |
| #else |
| static inline int wma_oem_data_response_handler(void *handle, |
| uint8_t *datap, uint32_t len) |
| { |
| return 0; |
| } |
| #endif /* FEATURE_OEM_DATA_SUPPORT */ |
| |
| static int wma_p2p_noa_event_handler(void *handle, u_int8_t *event, u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_P2P_NOA_EVENTID_param_tlvs *param_buf; |
| wmi_p2p_noa_event_fixed_param *p2p_noa_event; |
| u_int8_t vdev_id, i; |
| wmi_p2p_noa_info *p2p_noa_info; |
| struct p2p_sub_element_noa noa_ie; |
| u_int8_t *buf_ptr; |
| u_int32_t descriptors; |
| |
| param_buf = (WMI_P2P_NOA_EVENTID_param_tlvs *) event; |
| if (!param_buf) { |
| WMA_LOGE("Invalid P2P NoA event buffer"); |
| return -EINVAL; |
| } |
| |
| p2p_noa_event = param_buf->fixed_param; |
| buf_ptr = (u_int8_t *) p2p_noa_event; |
| buf_ptr += sizeof(wmi_p2p_noa_event_fixed_param); |
| p2p_noa_info = (wmi_p2p_noa_info *) (buf_ptr); |
| vdev_id = p2p_noa_event->vdev_id; |
| |
| if (WMI_UNIFIED_NOA_ATTR_IS_MODIFIED(p2p_noa_info)) { |
| |
| vos_mem_zero(&noa_ie, sizeof(noa_ie)); |
| noa_ie.index = (u_int8_t)WMI_UNIFIED_NOA_ATTR_INDEX_GET(p2p_noa_info); |
| noa_ie.oppPS = (u_int8_t)WMI_UNIFIED_NOA_ATTR_OPP_PS_GET(p2p_noa_info); |
| noa_ie.ctwindow = (u_int8_t)WMI_UNIFIED_NOA_ATTR_CTWIN_GET(p2p_noa_info); |
| descriptors = WMI_UNIFIED_NOA_ATTR_NUM_DESC_GET(p2p_noa_info); |
| noa_ie.num_descriptors = (u_int8_t)descriptors; |
| |
| if (noa_ie.num_descriptors > WMA_MAX_NOA_DESCRIPTORS) { |
| WMA_LOGD("Sizing down the no of desc %d to max", |
| noa_ie.num_descriptors); |
| noa_ie.num_descriptors = WMA_MAX_NOA_DESCRIPTORS; |
| } |
| |
| WMA_LOGI("%s: index %u, oppPs %u, ctwindow %u, " |
| "num_descriptors = %u", __func__, noa_ie.index, |
| noa_ie.oppPS, noa_ie.ctwindow, noa_ie.num_descriptors); |
| for(i = 0; i < noa_ie.num_descriptors; i++) { |
| noa_ie.noa_descriptors[i].type_count = |
| (u_int8_t)p2p_noa_info->noa_descriptors[i].type_count; |
| noa_ie.noa_descriptors[i].duration = |
| p2p_noa_info->noa_descriptors[i].duration; |
| noa_ie.noa_descriptors[i].interval = |
| p2p_noa_info->noa_descriptors[i].interval; |
| noa_ie.noa_descriptors[i].start_time = |
| p2p_noa_info->noa_descriptors[i].start_time; |
| WMA_LOGI("%s: NoA descriptor[%d] type_count %u, " |
| "duration %u, interval %u, start_time = %u", |
| __func__, i, |
| noa_ie.noa_descriptors[i].type_count, |
| noa_ie.noa_descriptors[i].duration, |
| noa_ie.noa_descriptors[i].interval, |
| noa_ie.noa_descriptors[i].start_time); |
| } |
| |
| /* Send a msg to LIM to update the NoA IE in probe response |
| * frames transmitted by the host */ |
| wma_update_probe_resp_noa(wma, &noa_ie); |
| } |
| |
| return 0; |
| } |
| |
| #ifdef FEATURE_WLAN_TDLS |
| static int wma_tdls_event_handler(void *handle, u_int8_t *event, u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_TDLS_PEER_EVENTID_param_tlvs *param_buf = NULL; |
| wmi_tdls_peer_event_fixed_param *peer_event = NULL; |
| tSirTdlsEventNotify *tdls_event; |
| |
| if (!event) { |
| WMA_LOGE("%s: event param null", __func__); |
| return -1; |
| } |
| |
| param_buf = (WMI_TDLS_PEER_EVENTID_param_tlvs *) event; |
| if (!param_buf) { |
| WMA_LOGE("%s: received null buf from target", __func__); |
| return -1; |
| } |
| |
| peer_event = param_buf->fixed_param; |
| if (!peer_event) { |
| WMA_LOGE("%s: received null event data from target", __func__); |
| return -1; |
| } |
| |
| tdls_event = (tSirTdlsEventNotify *) |
| vos_mem_malloc(sizeof(*tdls_event)); |
| if (!tdls_event) { |
| WMA_LOGE("%s: failed to allocate memory for tdls_event", __func__); |
| return -1; |
| } |
| |
| tdls_event->sessionId = peer_event->vdev_id; |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&peer_event->peer_macaddr, tdls_event->peerMac); |
| |
| switch(peer_event->peer_status) { |
| case WMI_TDLS_SHOULD_DISCOVER: |
| tdls_event->messageType = WDA_TDLS_SHOULD_DISCOVER; |
| break; |
| case WMI_TDLS_SHOULD_TEARDOWN: |
| tdls_event->messageType = WDA_TDLS_SHOULD_TEARDOWN; |
| break; |
| case WMI_TDLS_PEER_DISCONNECTED: |
| tdls_event->messageType = WDA_TDLS_PEER_DISCONNECTED; |
| break; |
| default: |
| vos_mem_free(tdls_event); |
| WMA_LOGE("%s: Discarding unknown tdls event(%d) from target", |
| __func__, peer_event->peer_status); |
| return -1; |
| } |
| |
| switch (peer_event->peer_reason) { |
| case WMI_TDLS_TEARDOWN_REASON_TX: |
| tdls_event->peer_reason = eWNI_TDLS_TEARDOWN_REASON_TX; |
| break; |
| case WMI_TDLS_TEARDOWN_REASON_RSSI: |
| tdls_event->peer_reason = eWNI_TDLS_TEARDOWN_REASON_RSSI; |
| break; |
| case WMI_TDLS_TEARDOWN_REASON_SCAN: |
| tdls_event->peer_reason = eWNI_TDLS_TEARDOWN_REASON_SCAN; |
| break; |
| case WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE: |
| tdls_event->peer_reason = eWNI_TDLS_DISCONNECTED_REASON_PEER_DELETE; |
| break; |
| case WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT: |
| tdls_event->peer_reason = eWNI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT; |
| break; |
| case WMI_TDLS_TEARDOWN_REASON_BAD_PTR: |
| tdls_event->peer_reason = eWNI_TDLS_TEARDOWN_REASON_BAD_PTR; |
| break; |
| case WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE: |
| tdls_event->peer_reason = eWNI_TDLS_TEARDOWN_REASON_NO_RESPONSE; |
| break; |
| default: |
| vos_mem_free(tdls_event); |
| WMA_LOGE("%s: unknown reason(%d) in tdls event(%d) from target", |
| __func__, peer_event->peer_reason, peer_event->peer_status); |
| return -1; |
| } |
| |
| WMA_LOGD("%s: sending msg to umac, messageType: 0x%x, " |
| "for peer: %pM, reason: %d, smesessionId: %d", |
| __func__, tdls_event->messageType, tdls_event->peerMac, |
| tdls_event->peer_reason, tdls_event->sessionId); |
| |
| wma_send_msg(wma, tdls_event->messageType, (void *)tdls_event, 0); |
| return 0; |
| } |
| #endif /* FEATURE_WLAN_TDLS */ |
| |
| /* |
| * WMI Handler for WMI_PHYERR_EVENTID event from firmware. |
| * This handler is currently handling only DFS phy errors. |
| * This handler will be invoked only when the DFS phyerror |
| * filtering offload is disabled. |
| * Return- 1:Success, 0:Failure |
| */ |
| static int wma_unified_phyerr_rx_event_handler(void * handle, |
| u_int8_t *data, u_int32_t datalen) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_PHYERR_EVENTID_param_tlvs *param_tlvs; |
| wmi_comb_phyerr_rx_hdr *pe_hdr; |
| u_int8_t *bufp; |
| wmi_single_phyerr_rx_event *ev; |
| struct ieee80211com *ic = wma->dfs_ic; |
| adf_os_size_t n; |
| A_UINT64 tsf64 = 0; |
| int phy_err_code = 0; |
| int error = 0; |
| tpAniSirGlobal mac_ctx = (tpAniSirGlobal)vos_get_context(VOS_MODULE_ID_PE, |
| wma->vos_context); |
| bool enable_log = false; |
| |
| if (NULL == mac_ctx) { |
| WMA_LOGE("%s: mac_ctx is NULL", __func__); |
| return 0; |
| } |
| |
| enable_log = mac_ctx->sap.enable_dfs_phy_error_logs; |
| param_tlvs = (WMI_PHYERR_EVENTID_param_tlvs *)data; |
| |
| if (!param_tlvs) |
| { |
| WMA_LOGE("%s: Received NULL data from FW", __func__); |
| return 0; |
| } |
| |
| pe_hdr = param_tlvs->hdr; |
| if (pe_hdr == NULL) |
| { |
| WMA_LOGE("%s: Received Data PE Header is NULL", __func__); |
| return 0; |
| } |
| |
| /* Ensure it's at least the size of the header */ |
| if (datalen < sizeof(*pe_hdr)) |
| { |
| WMA_LOGE("%s: Expected minimum size %zu, received %d", |
| __func__, sizeof(*pe_hdr), datalen); |
| return 0; |
| } |
| if (pe_hdr->buf_len > DFS_MAX_BUF_LENGHT) |
| { |
| WMA_LOGE("%s: Received Invalid Phyerror event buffer length = %d" |
| "Maximum allowed buf length = %d", |
| __func__, pe_hdr->buf_len, DFS_MAX_BUF_LENGHT); |
| |
| return 0; |
| } |
| |
| /* |
| * Reconstruct the 64 bit event TSF. This isn't from the MAC, it's |
| * at the time the event was sent to us, the TSF value will be |
| * in the future. |
| */ |
| tsf64 = pe_hdr->tsf_l32; |
| tsf64 |= (((uint64_t) pe_hdr->tsf_u32) << 32); |
| |
| /* |
| * Loop over the bufp, extracting out phyerrors |
| * wmi_unified_comb_phyerr_rx_event.bufp is a char pointer, |
| * which isn't correct here - what we have received here |
| * is an array of TLV-style PHY errors. |
| */ |
| n = 0;/* Start just after the header */ |
| bufp = param_tlvs->bufp; |
| while (n < pe_hdr->buf_len) |
| { |
| /* ensure there's at least space for the header */ |
| if ((pe_hdr->buf_len - n) < sizeof(ev->hdr)) |
| { |
| WMA_LOGE("%s: Not enough space.(datalen=%d, n=%zu, hdr=%zu bytes", |
| __func__,pe_hdr->buf_len,n,sizeof(ev->hdr)); |
| error = 1; |
| break; |
| } |
| /* |
| * Obtain a pointer to the beginning of the current event. |
| * data[0] is the beginning of the WMI payload. |
| */ |
| ev = (wmi_single_phyerr_rx_event *) &bufp[n]; |
| |
| /* |
| * Sanity check the buffer length of the event against |
| * what we currently have. |
| * Since buf_len is 32 bits, we check if it overflows |
| * a large 32 bit value. It's not 0x7fffffff because |
| * we increase n by (buf_len + sizeof(hdr)), which would |
| * in itself cause n to overflow. |
| * If "int" is 64 bits then this becomes a moot point. |
| */ |
| if (ev->hdr.buf_len > 0x7f000000) |
| { |
| WMA_LOGE("%s:buf_len is garbage (0x%x)",__func__, |
| ev->hdr.buf_len); |
| error = 1; |
| break; |
| } |
| if (n + ev->hdr.buf_len > pe_hdr->buf_len) |
| { |
| WMA_LOGE("%s: buf_len exceeds available space n=%zu," |
| "buf_len=%d, datalen=%d", |
| __func__,n,ev->hdr.buf_len,pe_hdr->buf_len); |
| error = 1; |
| break; |
| } |
| phy_err_code = WMI_UNIFIED_PHYERRCODE_GET(&ev->hdr); |
| |
| /* |
| * If the phyerror category matches, |
| * pass radar events to the dfs pattern matching code. |
| * Don't pass radar events with no buffer payload. |
| */ |
| if (phy_err_code == 0x5 || phy_err_code == 0x24) |
| { |
| if (ev->hdr.buf_len > 0) |
| { |
| /* Calling in to the DFS module to process the phyerr */ |
| dfs_process_phyerr(ic, &ev->bufp[0], ev->hdr.buf_len, |
| WMI_UNIFIED_RSSI_COMB_GET(&ev->hdr) & 0xff, |
| /* Extension RSSI */ |
| WMI_UNIFIED_RSSI_COMB_GET(&ev->hdr) & 0xff, |
| ev->hdr.tsf_timestamp, |
| tsf64, enable_log); |
| } |
| } |
| |
| /* |
| * Advance the buffer pointer to the next PHY error. |
| * buflen is the length of this payload, so we need to |
| * advance past the current header _AND_ the payload. |
| */ |
| n += sizeof(*ev) + ev->hdr.buf_len; |
| |
| }/*end while()*/ |
| if (error) |
| { |
| return (0); |
| } |
| else |
| { |
| return (1); |
| } |
| } |
| |
| #ifdef WLAN_FEATURE_NAN |
| /* function : wma_nan_rsp_event_handler |
| * Descriptin : Function is used to handle nan response |
| * Args : wma_handle, event buffer and its length |
| * Returns : SUCCESS or FAILURE |
| */ |
| static int wma_nan_rsp_event_handler(void *handle, u_int8_t *event_buf, |
| u_int32_t len) |
| { |
| WMI_NAN_EVENTID_param_tlvs *param_buf; |
| tSirNanEvent *nan_rsp_event; |
| wmi_nan_event_hdr *nan_rsp_event_hdr; |
| VOS_STATUS status; |
| vos_msg_t vos_msg; |
| u_int8_t *buf_ptr; |
| u_int32_t alloc_len; |
| |
| /* |
| * This is how received event_buf looks like |
| * |
| * <-------------------- event_buf -----------------------------------> |
| * |
| * <--wmi_nan_event_hdr--><---WMI_TLV_HDR_SIZE---><----- data --------> |
| * |
| * +-----------+---------+-----------------------+--------------------+ |
| * | tlv_header| data_len| WMITLV_TAG_ARRAY_BYTE | nan_rsp_event_data | |
| * +-----------+---------+-----------------------+--------------------+ |
| */ |
| |
| WMA_LOGD("%s: Posting NaN response event to SME", __func__); |
| param_buf = (WMI_NAN_EVENTID_param_tlvs *)event_buf; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid nan response event buf", __func__); |
| return -EINVAL; |
| } |
| nan_rsp_event_hdr = param_buf->fixed_param; |
| buf_ptr = (u_int8_t *)nan_rsp_event_hdr; |
| alloc_len = sizeof(tSirNanEvent); |
| alloc_len += nan_rsp_event_hdr->data_len; |
| if (nan_rsp_event_hdr->data_len > ((WMA_SVC_MSG_MAX_SIZE - |
| sizeof(*nan_rsp_event_hdr)) / sizeof(u_int8_t))) { |
| WMA_LOGE("excess data length:%d", nan_rsp_event_hdr->data_len); |
| VOS_ASSERT(0); |
| return -EINVAL; |
| } |
| nan_rsp_event = (tSirNanEvent *) vos_mem_malloc(alloc_len); |
| if (NULL == nan_rsp_event) { |
| WMA_LOGE("%s: Memory allocation failure", __func__); |
| return -ENOMEM; |
| } |
| |
| nan_rsp_event->event_data_len = nan_rsp_event_hdr->data_len; |
| vos_mem_copy(nan_rsp_event->event_data, buf_ptr + |
| sizeof(wmi_nan_event_hdr) + WMI_TLV_HDR_SIZE, |
| nan_rsp_event->event_data_len); |
| vos_msg.type = eWNI_SME_NAN_EVENT; |
| vos_msg.bodyptr = (void *)nan_rsp_event; |
| vos_msg.bodyval = 0; |
| |
| status = vos_mq_post_message(VOS_MQ_ID_SME, &vos_msg); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s: Failed to post NaN response event to SME", __func__); |
| vos_mem_free(nan_rsp_event); |
| return -1; |
| } |
| WMA_LOGD("%s: NaN response event Posted to SME", __func__); |
| return 0; |
| } |
| #endif |
| |
| /* |
| * WMI handler for WMI_DFS_RADAR_EVENTID |
| * This handler is registered for handling |
| * filtered DFS Phyerror. This handler is |
| * will be invoked only when DFS Phyerr |
| * filtering offload is enabled. |
| * Return- 1:Success, 0:Failure |
| */ |
| static int wma_unified_dfs_radar_rx_event_handler(void *handle, |
| u_int8_t *data, u_int32_t datalen) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| struct ieee80211com *ic; |
| struct ath_dfs *dfs; |
| struct dfs_event *event; |
| struct ieee80211_channel *chan; |
| int empty; |
| int do_check_chirp = 0; |
| int is_hw_chirp = 0; |
| int is_sw_chirp = 0; |
| int is_pri = 0; |
| |
| WMI_DFS_RADAR_EVENTID_param_tlvs *param_tlvs; |
| wmi_dfs_radar_event_fixed_param *radar_event; |
| |
| adf_os_atomic_dec(&wma->dfs_wmi_event_pending); |
| |
| ic = wma->dfs_ic; |
| if (NULL == ic) { |
| WMA_LOGE("%s: dfs_ic is NULL ", __func__); |
| return 0; |
| } |
| |
| dfs = (struct ath_dfs *)ic->ic_dfs; |
| param_tlvs = (WMI_DFS_RADAR_EVENTID_param_tlvs *) data; |
| |
| if (NULL == dfs) { |
| WMA_LOGE("%s: dfs is NULL ", __func__); |
| return 0; |
| } |
| /* |
| * This parameter holds the number |
| * of phyerror interrupts to the host |
| * after the phyerrors have passed through |
| * false detect filters in the firmware. |
| */ |
| dfs->dfs_phyerr_count++; |
| |
| if (!param_tlvs) { |
| WMA_LOGE("%s: Received NULL data from FW", __func__); |
| return 0; |
| } |
| |
| radar_event = param_tlvs->fixed_param; |
| |
| adf_os_spin_lock_bh(&ic->chan_lock); |
| chan = ic->ic_curchan; |
| |
| if (ic->disable_phy_err_processing) { |
| WMA_LOGD("%s: radar indication done,drop phyerror event", |
| __func__); |
| adf_os_spin_unlock_bh(&ic->chan_lock); |
| return 0; |
| } |
| |
| if (NV_CHANNEL_DFS != vos_nv_getChannelEnabledState(chan->ic_ieee)) { |
| WMA_LOGE("%s: Invalid DFS Phyerror event. Channel=%d is Non-DFS", |
| __func__, chan->ic_ieee); |
| adf_os_spin_unlock_bh(&ic->chan_lock); |
| return 0; |
| } |
| |
| adf_os_spin_unlock_bh(&ic->chan_lock); |
| dfs->ath_dfs_stats.total_phy_errors++; |
| |
| if (dfs->dfs_caps.ath_chip_is_bb_tlv) { |
| do_check_chirp = 1; |
| is_pri = 1; |
| is_hw_chirp = radar_event->pulse_is_chirp; |
| |
| if ((u_int32_t)dfs->dfs_phyerr_freq_min > |
| radar_event->pulse_center_freq) { |
| dfs->dfs_phyerr_freq_min = |
| (int)radar_event->pulse_center_freq; |
| } |
| |
| if (dfs->dfs_phyerr_freq_max < |
| (int)radar_event->pulse_center_freq) { |
| dfs->dfs_phyerr_freq_max = |
| (int)radar_event->pulse_center_freq; |
| } |
| } |
| |
| /* |
| * Now, add the parsed, checked and filtered |
| * radar phyerror event radar pulse event list. |
| * This event will then be processed by |
| * dfs_radar_processevent() to see if the pattern |
| * of pulses in radar pulse list match any radar |
| * singnature in the current regulatory domain. |
| */ |
| |
| ATH_DFSEVENTQ_LOCK(dfs); |
| empty = STAILQ_EMPTY(&(dfs->dfs_eventq)); |
| ATH_DFSEVENTQ_UNLOCK(dfs); |
| if (empty) { |
| return 0; |
| } |
| /* |
| * Add the event to the list, if there's space. |
| */ |
| ATH_DFSEVENTQ_LOCK(dfs); |
| event = STAILQ_FIRST(&(dfs->dfs_eventq)); |
| if (event == NULL) { |
| ATH_DFSEVENTQ_UNLOCK(dfs); |
| WMA_LOGE("%s: No more space left for queuing DFS Phyerror events", |
| __func__); |
| return 0; |
| } |
| STAILQ_REMOVE_HEAD(&(dfs->dfs_eventq), re_list); |
| ATH_DFSEVENTQ_UNLOCK(dfs); |
| dfs->dfs_phyerr_queued_count++; |
| dfs->dfs_phyerr_w53_counter++; |
| event->re_dur = (u_int8_t)radar_event->pulse_duration; |
| event->re_rssi = radar_event->rssi; |
| event->re_ts = radar_event->pulse_detect_ts & DFS_TSMASK; |
| event->re_full_ts = (((uint64_t)radar_event->upload_fullts_high) << 32) |
| | radar_event->upload_fullts_low; |
| |
| /** |
| * Index of peak magnitude |
| * To do |
| * Need change interface of WMI_DFS_RADAR_EVENTID to get delta_diff and |
| * delta_peak when DFS Phyerr filtering offload is enabled. |
| */ |
| event->sidx = radar_event->peak_sidx & 0x0000ffff; |
| event->re_delta_diff = 0; |
| event->re_delta_peak = 0; |
| event->re_flags = 0; |
| |
| /* |
| * Handle chirp flags. |
| */ |
| if (do_check_chirp) { |
| event->re_flags |= DFS_EVENT_CHECKCHIRP; |
| if (is_hw_chirp) { |
| event->re_flags |= DFS_EVENT_HW_CHIRP; |
| } |
| if (is_sw_chirp) { |
| event->re_flags |= DFS_EVENT_SW_CHIRP; |
| } |
| } |
| /* |
| * Correctly set which channel is being reported on |
| */ |
| if (is_pri) { |
| event->re_chanindex = (u_int8_t)dfs->dfs_curchan_radindex; |
| } else { |
| if (dfs->dfs_extchan_radindex == -1) { |
| WMA_LOGI("%s phyerr on ext channel", __func__); |
| } |
| event->re_chanindex = (u_int8_t)dfs->dfs_extchan_radindex; |
| WMA_LOGI("%s:New extension channel event is added to queue", |
| __func__); |
| } |
| |
| ATH_DFSQ_LOCK(dfs); |
| |
| STAILQ_INSERT_TAIL(&(dfs->dfs_radarq), event, re_list); |
| |
| empty = STAILQ_EMPTY(&dfs->dfs_radarq); |
| |
| ATH_DFSQ_UNLOCK(dfs); |
| |
| if (!empty && !dfs->ath_radar_tasksched) { |
| dfs->ath_radar_tasksched = 1; |
| OS_SET_TIMER(&dfs->ath_dfs_task_timer, 0); |
| } |
| |
| return 1; |
| |
| } |
| |
| /* |
| * Register appropriate dfs phyerror event handler |
| * based on phyerror filtering offload is enabled |
| * or disabled. |
| */ |
| static void |
| wma_register_dfs_event_handler(tp_wma_handle wma_handle) |
| { |
| if (NULL == wma_handle) { |
| WMA_LOGE("%s:wma_handle is NULL", __func__); |
| return; |
| } |
| |
| if (VOS_FALSE == wma_handle->dfs_phyerr_filter_offload) { |
| /* |
| * Register the wma_unified_phyerr_rx_event_handler |
| * for filtering offload disabled case to handle |
| * the DFS phyerrors. |
| */ |
| WMA_LOGD("%s:Phyerror Filtering offload is Disabled in ini", |
| __func__); |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_PHYERR_EVENTID, wma_unified_phyerr_rx_event_handler); |
| WMA_LOGD("%s: WMI_PHYERR_EVENTID event handler registered", |
| __func__); |
| } else { |
| WMA_LOGD("%s:Phyerror Filtering offload is Enabled in ini", |
| __func__); |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_DFS_RADAR_EVENTID, |
| wma_unified_dfs_radar_rx_event_handler); |
| WMA_LOGD("%s:WMI_DFS_RADAR_EVENTID event handler registered", |
| __func__); |
| } |
| |
| return; |
| } |
| |
| static int wma_peer_state_change_event_handler(void *handle, |
| u_int8_t *event_buff, |
| u_int32_t len) |
| { |
| WMI_PEER_STATE_EVENTID_param_tlvs *param_buf; |
| wmi_peer_state_event_fixed_param *event; |
| ol_txrx_vdev_handle vdev; |
| tp_wma_handle wma_handle = (tp_wma_handle)handle; |
| |
| if (!event_buff) { |
| WMA_LOGE("%s: event param null", __func__); |
| return -EINVAL; |
| } |
| |
| param_buf = (WMI_PEER_STATE_EVENTID_param_tlvs *)event_buff; |
| if (!param_buf) { |
| WMA_LOGE("%s: Received NULL buf ptr from FW", __func__); |
| return -ENOMEM; |
| } |
| |
| event = param_buf->fixed_param; |
| vdev = wma_find_vdev_by_id( wma_handle, event->vdev_id); |
| if (NULL == vdev) { |
| WMA_LOGP("%s: Couldn't find vdev for vdev_id: %d", |
| __func__, event->vdev_id); |
| return -EINVAL; |
| } |
| |
| if (vdev->opmode == wlan_op_mode_sta |
| && event->state == WMI_PEER_STATE_AUTHORIZED) { |
| /* |
| * set event so that WLANTL_ChangeSTAState |
| * can procced and unpause tx queue |
| */ |
| tl_shim_set_peer_authorized_event(wma_handle->vos_context, |
| event->vdev_id); |
| } |
| |
| return 0; |
| } |
| |
| #ifdef WLAN_FEATURE_LINK_LAYER_STATS |
| /* |
| * Register all the Link Layer Stats related event |
| * handler |
| */ |
| static void |
| wma_register_ll_stats_event_handler(tp_wma_handle wma_handle) |
| { |
| if (NULL == wma_handle) { |
| WMA_LOGE("%s: wma_handle is NULL", __func__); |
| return; |
| } |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_IFACE_LINK_STATS_EVENTID, |
| wma_unified_link_iface_stats_event_handler); |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_PEER_LINK_STATS_EVENTID, |
| wma_unified_link_peer_stats_event_handler); |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_RADIO_LINK_STATS_EVENTID, |
| wma_unified_link_radio_stats_event_handler); |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_RADIO_TX_POWER_LEVEL_STATS_EVENTID, |
| wma_unified_radio_tx_power_level_stats_event_handler); |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_PEER_STA_PS_STATECHG_EVENTID, |
| wma_peer_ps_evt_handler); |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_REPORT_STATS_EVENTID, |
| wma_ll_stats_evt_handler); |
| return; |
| } |
| #endif /* WLAN_FEATURE_LINK_LAYER_STATS */ |
| |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| static int wma_roam_synch_event_handler(void *handle, u_int8_t *event, u_int32_t len) |
| { |
| WMI_ROAM_SYNCH_EVENTID_param_tlvs *param_buf = NULL; |
| wmi_roam_synch_event_fixed_param *synch_event = NULL; |
| u_int8_t *bcn_probersp_ptr = NULL; |
| u_int8_t *reassoc_rsp_ptr = NULL; |
| tp_wma_handle wma = (tp_wma_handle)handle; |
| wmi_channel *chan = NULL; |
| wmi_key_material *key = NULL; |
| int size=0; |
| tSirRoamOffloadSynchInd *pRoamOffloadSynchInd; |
| uint32_t roam_synch_data_len; |
| |
| WMA_LOGD("LFR3:%s", __func__); |
| if (!event) { |
| WMA_LOGE("%s: event param null", __func__); |
| return -EINVAL; |
| } |
| |
| param_buf = (WMI_ROAM_SYNCH_EVENTID_param_tlvs *) event; |
| if (!param_buf) { |
| WMA_LOGE("%s: received null buf from target", __func__); |
| return -EINVAL; |
| } |
| |
| synch_event = param_buf->fixed_param; |
| if (!synch_event) { |
| WMA_LOGE("%s: received null event data from target", __func__); |
| return -EINVAL; |
| } |
| |
| if (synch_event->vdev_id >= wma->max_bssid) { |
| WMA_LOGE("%s: received invalid vdev_id %d", |
| __func__, synch_event->vdev_id); |
| return -EINVAL; |
| } |
| |
| DPTRACE(adf_dp_trace_record_event(ADF_DP_TRACE_EVENT_RECORD, |
| synch_event->vdev_id, ADF_PROTO_TYPE_EVENT, ADF_ROAM_SYNCH)); |
| |
| if(wma->interfaces[synch_event->vdev_id].roam_synch_in_progress == |
| VOS_TRUE) { |
| WMA_LOGE("%s: Ignoring RSI since one is already in progress", |
| __func__); |
| return -EINVAL; |
| } |
| |
| WMA_LOGD("synch payload: LEN bcn:%d, req:%d, rsp:%d", |
| synch_event->bcn_probe_rsp_len, |
| synch_event->reassoc_req_len, |
| synch_event->reassoc_rsp_len); |
| |
| if (synch_event->bcn_probe_rsp_len > WMA_SVC_MSG_MAX_SIZE) |
| return -EINVAL; |
| if (synch_event->reassoc_rsp_len > |
| (WMA_SVC_MSG_MAX_SIZE - synch_event->bcn_probe_rsp_len)) |
| return -EINVAL; |
| if (synch_event->reassoc_req_len > |
| WMA_SVC_MSG_MAX_SIZE - (synch_event->bcn_probe_rsp_len + |
| synch_event->reassoc_rsp_len)) |
| return -EINVAL; |
| |
| roam_synch_data_len = synch_event->bcn_probe_rsp_len + |
| synch_event->reassoc_rsp_len + |
| synch_event->reassoc_req_len; |
| /* |
| * Below is the check for the entire size of the message received from' |
| * the firmware. |
| */ |
| if (roam_synch_data_len > WMA_SVC_MSG_MAX_SIZE - |
| (sizeof(*synch_event) + sizeof(wmi_channel) + |
| sizeof(wmi_key_material) + sizeof(uint32_t))) |
| return -EINVAL; |
| |
| if (sizeof(tSirRoamOffloadSynchInd) > |
| (WMA_SVC_MSG_MAX_SIZE - roam_synch_data_len)) |
| return -EINVAL; |
| roam_synch_data_len += sizeof(tSirRoamOffloadSynchInd); |
| |
| adf_os_spin_lock_bh(&wma->roam_synch_lock); |
| wma->interfaces[synch_event->vdev_id].roam_synch_in_progress = VOS_TRUE; |
| adf_os_spin_unlock_bh(&wma->roam_synch_lock); |
| pRoamOffloadSynchInd = |
| (tSirRoamOffloadSynchInd *)vos_mem_malloc(roam_synch_data_len); |
| if (!pRoamOffloadSynchInd) { |
| WMA_LOGE("%s: failed to allocate memory for roam_synch_event", __func__); |
| return -ENOMEM; |
| } |
| /* abort existing scan if any */ |
| if (wma->interfaces[synch_event->vdev_id].scan_info.scan_id != 0) { |
| tAbortScanParams abortScan; |
| WMA_LOGD("LFR3: Aborting Scan with scan_id=%d\n", |
| wma->interfaces[synch_event->vdev_id].scan_info.scan_id); |
| abortScan.SessionId = synch_event->vdev_id; |
| wma_stop_scan(wma, &abortScan); |
| } |
| pRoamOffloadSynchInd->messageType = eWNI_SME_ROAM_OFFLOAD_SYNCH_IND; |
| pRoamOffloadSynchInd->length = size; |
| pRoamOffloadSynchInd->roamedVdevId = synch_event->vdev_id; |
| pRoamOffloadSynchInd->authStatus = synch_event->auth_status; |
| pRoamOffloadSynchInd->roamReason = synch_event->roam_reason; |
| pRoamOffloadSynchInd->rssi = synch_event->rssi; |
| pRoamOffloadSynchInd->isBeacon = synch_event->is_beacon; |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&synch_event->bssid, pRoamOffloadSynchInd->bssId); |
| pRoamOffloadSynchInd->beaconProbeRespOffset = sizeof(tSirRoamOffloadSynchInd); |
| bcn_probersp_ptr = (tANI_U8 *)pRoamOffloadSynchInd + |
| pRoamOffloadSynchInd->beaconProbeRespOffset; |
| pRoamOffloadSynchInd->beaconProbeRespLength = synch_event->bcn_probe_rsp_len; |
| vos_mem_copy(bcn_probersp_ptr, param_buf->bcn_probe_rsp_frame, |
| pRoamOffloadSynchInd->beaconProbeRespLength); |
| pRoamOffloadSynchInd->reassocRespOffset = sizeof(tSirRoamOffloadSynchInd) + |
| pRoamOffloadSynchInd->beaconProbeRespLength; |
| pRoamOffloadSynchInd->reassocRespLength = synch_event->reassoc_rsp_len; |
| reassoc_rsp_ptr = (tANI_U8 *)pRoamOffloadSynchInd + |
| pRoamOffloadSynchInd->reassocRespOffset; |
| vos_mem_copy(reassoc_rsp_ptr, |
| param_buf->reassoc_rsp_frame, |
| pRoamOffloadSynchInd->reassocRespLength); |
| chan = (wmi_channel *) param_buf->chan; |
| pRoamOffloadSynchInd->chan_freq = chan->mhz; |
| key = (wmi_key_material *) param_buf->key; |
| if (key != NULL) |
| { |
| VOS_TRACE_HEX_DUMP(VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_DEBUG, |
| key->replay_counter, |
| SIR_REPLAY_CTR_LEN); |
| vos_mem_copy(pRoamOffloadSynchInd->kck, key->kck, |
| SIR_KCK_KEY_LEN); |
| vos_mem_copy(pRoamOffloadSynchInd->kek, key->kek, |
| SIR_KEK_KEY_LEN); |
| vos_mem_copy(pRoamOffloadSynchInd->replay_ctr, key->replay_counter, |
| SIR_REPLAY_CTR_LEN); |
| } |
| wma_send_msg(wma, WDA_ROAM_OFFLOAD_SYNCH_IND, |
| (void *) pRoamOffloadSynchInd, 0); |
| return 0; |
| } |
| #endif |
| |
| /** |
| * wma_rssi_breached_event_handler() - rssi breached event handler |
| * @handle: wma handle |
| * @cmd_param_info: event handler data |
| * @len: length of @cmd_param_info |
| * |
| * Return: 0 on success; error number otherwise |
| */ |
| static int wma_rssi_breached_event_handler(void *handle, |
| u_int8_t *cmd_param_info, u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle)handle; |
| WMI_RSSI_BREACH_EVENTID_param_tlvs *param_buf; |
| wmi_rssi_breach_event_fixed_param *event; |
| struct rssi_breach_event rssi; |
| tpAniSirGlobal mac = (tpAniSirGlobal)vos_get_context( |
| VOS_MODULE_ID_PE, wma->vos_context); |
| if (!mac) { |
| WMA_LOGE("%s: Invalid mac context", __func__); |
| return -EINVAL; |
| } |
| if (!mac->sme.rssi_threshold_breached_cb) { |
| WMA_LOGE("%s: Callback not registered", __func__); |
| return -EINVAL; |
| } |
| param_buf = (WMI_RSSI_BREACH_EVENTID_param_tlvs *)cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid rssi breached event", __func__); |
| return -EINVAL; |
| } |
| event = param_buf->fixed_param; |
| |
| rssi.request_id = event->request_id; |
| rssi.session_id = event->vdev_id; |
| rssi.curr_rssi = event->rssi + WMA_TGT_NOISE_FLOOR_DBM; |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&event->bssid, rssi.curr_bssid.bytes); |
| |
| WMA_LOGD("%s: req_id: %u vdev_id: %d curr_rssi: %d", __func__, |
| rssi.request_id, rssi.session_id, rssi.curr_rssi); |
| WMA_LOGI("%s: curr_bssid: %pM", __func__, rssi.curr_bssid.bytes); |
| |
| mac->sme.rssi_threshold_breached_cb(mac->hHdd, &rssi); |
| WMA_LOGD("%s: Invoke HDD rssi breached callback", __func__); |
| return 0; |
| } |
| |
| /** |
| * wma_chip_power_save_failure_detected_handler() - chip pwr save fail detected |
| * event handler |
| * @handle: wma handle |
| * @cmd_param_info: event handler data |
| * @len: length of @cmd_param_info |
| * |
| * Return: VOS_STATUS_SUCCESS on success; error code otherwise |
| */ |
| static int wma_chip_power_save_failure_detected_handler(void *handle, |
| u_int8_t *cmd_param_info, u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle)handle; |
| WMI_PDEV_CHIP_POWER_SAVE_FAILURE_DETECTED_EVENTID_param_tlvs *param_buf; |
| wmi_chip_power_save_failure_detected_fixed_param *event; |
| struct chip_pwr_save_fail_detected_params pwr_save_fail_params; |
| tpAniSirGlobal mac; |
| |
| if (NULL == wma) { |
| WMA_LOGE("%s: wma_handle is NULL", __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| mac = (tpAniSirGlobal)vos_get_context( |
| VOS_MODULE_ID_PE, wma->vos_context); |
| if (!mac) { |
| WMA_LOGE("%s: Invalid mac context", __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| if (!mac->sme.chip_power_save_fail_cb) { |
| WMA_LOGE("%s: Callback not registered", __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| param_buf = |
| (WMI_PDEV_CHIP_POWER_SAVE_FAILURE_DETECTED_EVENTID_param_tlvs *) |
| cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid pwr_save_fail_params breached event", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| event = param_buf->fixed_param; |
| |
| pwr_save_fail_params.failure_reason_code = |
| event->power_save_failure_reason_code; |
| pwr_save_fail_params.wake_lock_bitmap[0] = |
| event->protocol_wake_lock_bitmap[0]; |
| pwr_save_fail_params.wake_lock_bitmap[1] = |
| event->protocol_wake_lock_bitmap[1]; |
| pwr_save_fail_params.wake_lock_bitmap[2] = |
| event->protocol_wake_lock_bitmap[2]; |
| pwr_save_fail_params.wake_lock_bitmap[3] = |
| event->protocol_wake_lock_bitmap[3]; |
| |
| mac->sme.chip_power_save_fail_cb(mac->hHdd, |
| &pwr_save_fail_params); |
| WMA_LOGD("%s: Invoke HDD pwr_save_fail callback", __func__); |
| return VOS_STATUS_SUCCESS; |
| } |
| /* |
| * Send WMI_DFS_PHYERR_FILTER_ENA_CMDID or |
| * WMI_DFS_PHYERR_FILTER_DIS_CMDID command |
| * to firmware based on phyerr filtering |
| * offload status. |
| */ |
| static int |
| wma_unified_dfs_phyerr_filter_offload_enable(tp_wma_handle wma_handle) |
| { |
| wmi_dfs_phyerr_filter_ena_cmd_fixed_param* enable_phyerr_offload_cmd; |
| wmi_dfs_phyerr_filter_dis_cmd_fixed_param* disable_phyerr_offload_cmd; |
| wmi_buf_t buf; |
| u_int16_t len; |
| int ret; |
| |
| if (NULL == wma_handle) { |
| WMA_LOGE("%s:wma_handle is NULL", __func__); |
| return 0; |
| } |
| |
| if (VOS_FALSE == wma_handle->dfs_phyerr_filter_offload) { |
| WMA_LOGD("%s:Phyerror Filtering offload is Disabled in ini", |
| __func__); |
| len = sizeof(*disable_phyerr_offload_cmd); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| return 0; |
| } |
| disable_phyerr_offload_cmd = |
| (wmi_dfs_phyerr_filter_dis_cmd_fixed_param *) |
| wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(&disable_phyerr_offload_cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_dfs_phyerr_filter_dis_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_dfs_phyerr_filter_dis_cmd_fixed_param)); |
| |
| /* |
| * Send WMI_DFS_PHYERR_FILTER_DIS_CMDID |
| * to the firmware to disable the phyerror |
| * filtering offload. |
| */ |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_DFS_PHYERR_FILTER_DIS_CMDID); |
| if (ret < 0) { |
| WMA_LOGE("%s: Failed to send WMI_DFS_PHYERR_FILTER_DIS_CMDID ret=%d", |
| __func__, ret); |
| wmi_buf_free(buf); |
| return 0; |
| } |
| WMA_LOGD("%s: WMI_DFS_PHYERR_FILTER_DIS_CMDID Send Success", |
| __func__); |
| } else { |
| WMA_LOGD("%s:Phyerror Filtering offload is Enabled in ini", |
| __func__); |
| |
| len = sizeof(*enable_phyerr_offload_cmd); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| return 0; |
| } |
| |
| enable_phyerr_offload_cmd = |
| (wmi_dfs_phyerr_filter_ena_cmd_fixed_param *) |
| wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(&enable_phyerr_offload_cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_dfs_phyerr_filter_ena_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_dfs_phyerr_filter_ena_cmd_fixed_param)); |
| |
| /* |
| * Send a WMI_DFS_PHYERR_FILTER_ENA_CMDID |
| * to the firmware to enable the phyerror |
| * filtering offload. |
| */ |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_DFS_PHYERR_FILTER_ENA_CMDID); |
| |
| if (ret < 0) { |
| WMA_LOGE("%s: Failed to send WMI_DFS_PHYERR_FILTER_ENA_CMDID ret=%d", |
| __func__, ret); |
| wmi_buf_free(buf); |
| return 0; |
| } |
| WMA_LOGD("%s: WMI_DFS_PHYERR_FILTER_ENA_CMDID Send Success", |
| __func__); |
| } |
| |
| return 1; |
| } |
| |
| /* |
| * WMI Handler for WMI_OFFLOAD_BCN_TX_STATUS_EVENTID event from firmware. |
| * This event is generated by FW when the beacon transmission is offloaded |
| * and the host performs beacon template modification using WMI_BCN_TMPL_CMDID |
| * The FW generates this event when the first successful beacon transmission |
| * after template update |
| * Return- 1:Success, 0:Failure |
| */ |
| static int wma_unified_bcntx_status_event_handler(void *handle, u_int8_t *cmd_param_info, |
| u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_OFFLOAD_BCN_TX_STATUS_EVENTID_param_tlvs *param_buf; |
| wmi_offload_bcn_tx_status_event_fixed_param *resp_event; |
| tSirFirstBeaconTxCompleteInd *beacon_tx_complete_ind; |
| |
| param_buf = (WMI_OFFLOAD_BCN_TX_STATUS_EVENTID_param_tlvs *) cmd_param_info; |
| if (!param_buf) { |
| WMA_LOGE("Invalid bcn tx response event buffer"); |
| return -EINVAL; |
| } |
| |
| resp_event = param_buf->fixed_param; |
| |
| if (resp_event->vdev_id >= wma->max_bssid) { |
| WMA_LOGE("%s: received invalid vdev_id %d", |
| __func__, resp_event->vdev_id); |
| return -EINVAL; |
| } |
| |
| /* Check for valid handle to ensure session is not deleted in any race */ |
| if (!wma->interfaces[resp_event->vdev_id].handle) { |
| WMA_LOGE("%s: The session does not exist", __func__); |
| return -EINVAL; |
| } |
| |
| /* Beacon Tx Indication supports only AP mode. Ignore in other modes */ |
| if (wma_is_vdev_in_ap_mode(wma, resp_event->vdev_id) == false) { |
| WMA_LOGI("%s: Beacon Tx Indication does not support type %d and sub_type %d", |
| __func__, wma->interfaces[resp_event->vdev_id].type, |
| wma->interfaces[resp_event->vdev_id].sub_type); |
| return 0; |
| } |
| |
| beacon_tx_complete_ind = (tSirFirstBeaconTxCompleteInd *) |
| vos_mem_malloc(sizeof(tSirFirstBeaconTxCompleteInd)); |
| if (!beacon_tx_complete_ind) { |
| WMA_LOGE("%s: Failed to alloc beacon_tx_complete_ind", __func__); |
| return -ENOMEM; |
| } |
| |
| beacon_tx_complete_ind->messageType = WDA_DFS_BEACON_TX_SUCCESS_IND; |
| beacon_tx_complete_ind->length = sizeof(tSirFirstBeaconTxCompleteInd); |
| beacon_tx_complete_ind->bssIdx = resp_event->vdev_id; |
| |
| wma_send_msg(wma, WDA_DFS_BEACON_TX_SUCCESS_IND, (void *)beacon_tx_complete_ind, 0); |
| return 0; |
| } |
| |
| static int wma_vdev_install_key_complete_event_handler(void *handle, u_int8_t *event, u_int32_t len) |
| { |
| WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID_param_tlvs *param_buf = NULL; |
| wmi_vdev_install_key_complete_event_fixed_param *key_fp = NULL; |
| |
| if (!event) { |
| WMA_LOGE("%s: event param null", __func__); |
| return -1; |
| } |
| |
| param_buf = (WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID_param_tlvs *) event; |
| if (!param_buf) { |
| WMA_LOGE("%s: received null buf from target", __func__); |
| return -1; |
| } |
| |
| key_fp = param_buf->fixed_param; |
| if (!key_fp) { |
| WMA_LOGE("%s: received null event data from target", __func__); |
| return -1; |
| } |
| /* |
| * Do nothing for now. Completion of set key is already indicated to lim |
| */ |
| WMA_LOGI("%s: WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID", __func__); |
| return 0; |
| } |
| |
| #ifdef WLAN_FEATURE_STATS_EXT |
| static int wma_stats_ext_event_handler(void *handle, u_int8_t *event_buf, |
| u_int32_t len) |
| { |
| WMI_STATS_EXT_EVENTID_param_tlvs *param_buf; |
| tSirStatsExtEvent *stats_ext_event; |
| wmi_stats_ext_event_fixed_param *stats_ext_info; |
| VOS_STATUS status; |
| vos_msg_t vos_msg; |
| u_int8_t *buf_ptr; |
| u_int32_t alloc_len; |
| |
| WMA_LOGD("%s: Posting stats ext event to SME", __func__); |
| |
| param_buf = (WMI_STATS_EXT_EVENTID_param_tlvs *)event_buf; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid stats ext event buf", __func__); |
| return -EINVAL; |
| } |
| |
| stats_ext_info = param_buf->fixed_param; |
| buf_ptr = (u_int8_t *)stats_ext_info; |
| |
| alloc_len = sizeof(tSirStatsExtEvent); |
| alloc_len += stats_ext_info->data_len; |
| |
| if (stats_ext_info->data_len > (WMA_SVC_MSG_MAX_SIZE - |
| sizeof(*stats_ext_info))) { |
| WMA_LOGE("Excess data_len:%d", stats_ext_info->data_len); |
| VOS_ASSERT(0); |
| return -EINVAL; |
| } |
| |
| stats_ext_event = (tSirStatsExtEvent *) vos_mem_malloc(alloc_len); |
| if (NULL == stats_ext_event) { |
| WMA_LOGE("%s: Memory allocation failure", __func__); |
| return -ENOMEM; |
| } |
| |
| buf_ptr += sizeof(wmi_stats_ext_event_fixed_param) + WMI_TLV_HDR_SIZE ; |
| |
| stats_ext_event->vdev_id = stats_ext_info->vdev_id; |
| stats_ext_event->event_data_len = stats_ext_info->data_len; |
| vos_mem_copy(stats_ext_event->event_data, |
| buf_ptr, |
| stats_ext_event->event_data_len); |
| |
| vos_msg.type = eWNI_SME_STATS_EXT_EVENT; |
| vos_msg.bodyptr = (void *)stats_ext_event; |
| vos_msg.bodyval = 0; |
| |
| status = vos_mq_post_message(VOS_MQ_ID_SME, &vos_msg); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s: Failed to post stats ext event to SME", __func__); |
| vos_mem_free(stats_ext_event); |
| return -1; |
| } |
| |
| WMA_LOGD("%s: stats ext event Posted to SME", __func__); |
| return 0; |
| } |
| |
| static int wma_rx_aggr_failure_event_handler(void *handle, u_int8_t *event_buf, |
| u_int32_t len) |
| { |
| WMI_REPORT_RX_AGGR_FAILURE_EVENTID_param_tlvs *param_buf; |
| struct sir_sme_rx_aggr_hole_ind *rx_aggr_hole_event; |
| wmi_rx_aggr_failure_event_fixed_param *rx_aggr_failure_info; |
| wmi_rx_aggr_failure_info *hole_info; |
| u_int32_t i, alloc_len; |
| VOS_STATUS status; |
| vos_msg_t vos_msg; |
| |
| WMA_LOGD("%s: Posting stats ext event to SME", __func__); |
| |
| param_buf = (WMI_REPORT_RX_AGGR_FAILURE_EVENTID_param_tlvs *)event_buf; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid stats ext event buf", __func__); |
| return -EINVAL; |
| } |
| |
| rx_aggr_failure_info = param_buf->fixed_param; |
| hole_info = param_buf->failure_info; |
| |
| if (rx_aggr_failure_info->num_failure_info > ((WMA_SVC_MSG_MAX_SIZE - |
| sizeof(*rx_aggr_hole_event)) / |
| sizeof(rx_aggr_hole_event->hole_info_array[0]))) { |
| WMA_LOGE("%s: Excess data from WMI num_failure_info %d", |
| __func__, rx_aggr_failure_info->num_failure_info); |
| return -EINVAL; |
| } |
| |
| alloc_len = sizeof(*rx_aggr_hole_event) + |
| (rx_aggr_failure_info->num_failure_info)* |
| sizeof(rx_aggr_hole_event->hole_info_array[0]); |
| rx_aggr_hole_event = vos_mem_malloc(alloc_len); |
| if (NULL == rx_aggr_hole_event) { |
| WMA_LOGE("%s: Memory allocation failure", __func__); |
| return -ENOMEM; |
| } |
| |
| rx_aggr_hole_event->hole_cnt = rx_aggr_failure_info->num_failure_info; |
| WMA_LOGD("aggr holes_sum: %d\n", |
| rx_aggr_failure_info->num_failure_info); |
| for (i = 0; i < rx_aggr_hole_event->hole_cnt; i++) { |
| rx_aggr_hole_event->hole_info_array[i] = |
| hole_info->end_seq - hole_info->start_seq + 1; |
| WMA_LOGD("aggr_index: %d\tstart_seq: %d\tend_seq: %d\t" |
| "hole_info: %d mpdu lost", |
| i, hole_info->start_seq, hole_info->end_seq, |
| rx_aggr_hole_event->hole_info_array[i]); |
| hole_info++; |
| } |
| |
| vos_msg.type = eWNI_SME_RX_AGGR_HOLE_IND; |
| vos_msg.bodyptr = rx_aggr_hole_event; |
| vos_msg.bodyval = 0; |
| |
| status = vos_mq_post_message(VOS_MQ_ID_SME, &vos_msg); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s: Failed to post stats ext event to SME", __func__); |
| vos_mem_free(rx_aggr_hole_event); |
| return -EINVAL; |
| } |
| |
| WMA_LOGD("%s: stats ext event Posted to SME", __func__); |
| |
| return 0; |
| } |
| #endif |
| |
| /** |
| * wma_chan_info_event_handler() - chan info event handler |
| * @handle: wma handle |
| * @event_buf: event handler data |
| * @len: length of @event_buf |
| * |
| * this function will handle the WMI_CHAN_INFO_EVENTID |
| * |
| * Return: int |
| */ |
| static int |
| wma_chan_info_event_handler(void *handle, u_int8_t *event_buf, |
| u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle)handle; |
| WMI_CHAN_INFO_EVENTID_param_tlvs *param_buf; |
| wmi_chan_info_event_fixed_param *event; |
| struct scan_chan_info buf; |
| tpAniSirGlobal mac = NULL; |
| struct lim_channel_status *channel_status; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| |
| if (wma != NULL && wma->vos_context != NULL) { |
| mac = (tpAniSirGlobal)vos_get_context(VOS_MODULE_ID_PE, |
| wma->vos_context); |
| } |
| if (!mac) { |
| WMA_LOGE("%s: Invalid mac context", __func__); |
| return -EINVAL; |
| } |
| |
| WMA_LOGD("%s: monitor:%d", __func__, mac->snr_monitor_enabled); |
| if (mac->snr_monitor_enabled && mac->chan_info_cb) { |
| param_buf = |
| (WMI_CHAN_INFO_EVENTID_param_tlvs *)event_buf; |
| if (!param_buf) { |
| WMA_LOGA("%s: Invalid chan info event", __func__); |
| return -EINVAL; |
| } |
| |
| event = param_buf->fixed_param; |
| if (!event) { |
| WMA_LOGA("%s: Invalid fixed param", __func__); |
| return -EINVAL; |
| } |
| buf.tx_frame_count = event->tx_frame_cnt; |
| buf.clock_freq = event->mac_clk_mhz; |
| buf.cmd_flag = event->cmd_flags; |
| buf.freq = event->freq; |
| buf.noise_floor = event->noise_floor; |
| buf.cycle_count = event->cycle_count; |
| buf.rx_clear_count = event->rx_clear_count; |
| mac->chan_info_cb(&buf); |
| } |
| |
| if (ACS_FW_REPORT_PARAM_CONFIGURED && |
| mac->sme.currDeviceMode == VOS_STA_SAP_MODE) { |
| param_buf = (WMI_CHAN_INFO_EVENTID_param_tlvs *) event_buf; |
| if (!param_buf) { |
| WMA_LOGE("Invalid chan info event buffer"); |
| return -EINVAL; |
| } |
| event = param_buf->fixed_param; |
| channel_status = |
| vos_mem_malloc(sizeof(*channel_status)); |
| if (!channel_status) { |
| WMA_LOGE(FL("Mem alloc fail")); |
| return -ENOMEM; |
| } |
| WMA_LOGI(FL("freq=%d nf=%d rx_cnt=%u cycle_count=%u " |
| "tx_pwr_range=%d tx_pwr_tput=%d " |
| "rx_frame_count=%u my_bss_rx_cycle_count=%u " |
| "rx_11b_mode_data_duration=%d " |
| "tx_frame_cnt=%d mac_clk_mhz=%d cmd_flags=%d"), |
| event->freq, |
| event->noise_floor, |
| event->rx_clear_count, |
| event->cycle_count, |
| event->chan_tx_pwr_range, |
| event->chan_tx_pwr_tp, |
| event->rx_frame_count, |
| event->my_bss_rx_cycle_count, |
| event->rx_11b_mode_data_duration, |
| event->tx_frame_cnt, |
| event->mac_clk_mhz, |
| event->cmd_flags |
| ); |
| |
| channel_status->channelfreq = event->freq; |
| channel_status->noise_floor = event->noise_floor; |
| channel_status->rx_clear_count = |
| event->rx_clear_count; |
| channel_status->cycle_count = event->cycle_count; |
| channel_status->chan_tx_pwr_range = |
| event->chan_tx_pwr_range; |
| channel_status->chan_tx_pwr_throughput = |
| event->chan_tx_pwr_tp; |
| channel_status->rx_frame_count = |
| event->rx_frame_count; |
| channel_status->bss_rx_cycle_count = |
| event->my_bss_rx_cycle_count; |
| channel_status->rx_11b_mode_data_duration = |
| event->rx_11b_mode_data_duration; |
| channel_status->tx_frame_count = |
| event->tx_frame_cnt; |
| channel_status->mac_clk_mhz = |
| event->mac_clk_mhz; |
| channel_status->channel_id = |
| vos_freq_to_chan(event->freq); |
| channel_status->cmd_flags = |
| event->cmd_flags; |
| |
| wma_send_msg(handle, |
| WDA_RX_CHN_STATUS_EVENT, |
| (void *) channel_status, 0); |
| } |
| return 0; |
| } |
| |
| static void |
| wma_register_extscan_event_handler(tp_wma_handle wma_handle) |
| { |
| if (!wma_handle) { |
| WMA_LOGE("%s: extscan wma_handle is NULL", __func__); |
| return; |
| } |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_EXTSCAN_START_STOP_EVENTID, |
| wma_extscan_start_stop_event_handler); |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_EXTSCAN_CAPABILITIES_EVENTID, |
| wma_extscan_capabilities_event_handler); |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_EXTSCAN_HOTLIST_MATCH_EVENTID, |
| wma_extscan_hotlist_match_event_handler); |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_EXTSCAN_WLAN_CHANGE_RESULTS_EVENTID, |
| wma_extscan_change_results_event_handler); |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_EXTSCAN_OPERATION_EVENTID, |
| wma_extscan_operations_event_handler); |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_EXTSCAN_TABLE_USAGE_EVENTID, |
| wma_extscan_table_usage_event_handler); |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_EXTSCAN_CACHED_RESULTS_EVENTID, |
| wma_extscan_cached_results_event_handler); |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_PASSPOINT_MATCH_EVENTID, |
| wma_passpoint_match_event_handler); |
| |
| return; |
| |
| } |
| |
| static int wma_antenna_isolation_event_handler(void *handle, |
| u_int8_t *param, u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle)handle; |
| wmi_coex_report_isolation_event_fixed_param *event; |
| WMI_COEX_REPORT_ANTENNA_ISOLATION_EVENTID_param_tlvs *param_buf; |
| struct sir_isolation_resp isolation; |
| tpAniSirGlobal mac = NULL; |
| WMA_LOGE("%s: handle %pK param %pK len %d", __func__, handle, param, len); |
| |
| if(wma != NULL && wma->vos_context != NULL) { |
| mac = (tpAniSirGlobal)vos_get_context( |
| VOS_MODULE_ID_PE, wma->vos_context); |
| } |
| if (!mac) { |
| WMA_LOGE("%s: Invalid mac context", __func__); |
| return -EINVAL; |
| } |
| |
| param_buf = |
| (WMI_COEX_REPORT_ANTENNA_ISOLATION_EVENTID_param_tlvs *)param; |
| if (!param_buf) { |
| WMA_LOGE("%s: Invalid isolation event", __func__); |
| return -EINVAL; |
| } |
| event = param_buf->fixed_param; |
| isolation.isolation_chain0 = event->isolation_chain0; |
| isolation.isolation_chain1 = event->isolation_chain1; |
| isolation.isolation_chain2 = event->isolation_chain2; |
| isolation.isolation_chain3 = event->isolation_chain3; |
| |
| printk("\n*********************ANTENNA ISOLATION********************\n"); |
| |
| WMA_LOGD("%s: chain1 %d chain2 %d chain3 %d chain4 %d", __func__, |
| isolation.isolation_chain0, isolation.isolation_chain1, |
| isolation.isolation_chain2, isolation.isolation_chain3); |
| mac->sme.get_isolation(&isolation, mac->sme.get_isolation_cb_context); |
| return 0; |
| } |
| |
| void wma_wow_tx_complete(void *wma) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle)wma; |
| WMA_LOGD("WOW_TX_COMPLETE DONE"); |
| vos_event_set(&wma_handle->wow_tx_complete); |
| } |
| |
| #ifdef WLAN_FEATURE_NAN |
| /** |
| * wma_set_nan_enable() - set nan enable flag in WMA handle |
| * @wma_handle: Pointer to wma handle |
| * @mac_param: Pointer to mac_param |
| * |
| * Return: none |
| */ |
| static void wma_set_nan_enable(tp_wma_handle wma_handle, |
| tMacOpenParameters *mac_param) |
| { |
| wma_handle->is_nan_enabled = mac_param->is_nan_enabled; |
| } |
| #else |
| static void wma_set_nan_enable(tp_wma_handle wma_handle, |
| tMacOpenParameters *mac_param) |
| { |
| } |
| #endif |
| |
| #ifdef WLAN_FEATURE_TSF_PLUS |
| /** |
| * wma_update_ptp_params() - update bundle params |
| * @olCfg: cfg handle |
| * @mac_params: mac params |
| * |
| * Return: none |
| */ |
| static |
| void wma_update_ptp_params(struct txrx_pdev_cfg_param_t *olCfg, |
| tMacOpenParameters *mac_params) |
| { |
| olCfg->is_ptp_enabled = mac_params->is_ptp_enabled; |
| } |
| #else |
| static |
| void wma_update_ptp_params(struct txrx_pdev_cfg_param_t *olCfg, |
| tMacOpenParameters *mac_params) |
| { |
| return; |
| } |
| #endif |
| |
| #ifdef QCA_SUPPORT_TXRX_DRIVER_TCP_DEL_ACK |
| /** |
| * cfg_update_del_ack_params() - update del ack parameters |
| * @olCfg: cfg handle |
| * @mac_params: mac params |
| * |
| * Return: none |
| */ |
| static |
| void cfg_update_del_ack_params(struct txrx_pdev_cfg_param_t *olCfg, |
| tMacOpenParameters *mac_params) |
| { |
| olCfg->del_ack_enable = mac_params->del_ack_enable; |
| olCfg->del_ack_timer_value = mac_params->del_ack_timer_value; |
| olCfg->del_ack_pkt_count = mac_params->del_ack_pkt_count; |
| } |
| #else |
| static |
| void cfg_update_del_ack_params(struct txrx_pdev_cfg_param_t *olCfg, |
| tMacOpenParameters *mac_params) |
| { |
| } |
| #endif |
| |
| |
| #ifdef QCA_SUPPORT_TXRX_HL_BUNDLE |
| /** |
| * ol_cfg_update_bundle_params() - update bundle params |
| * @olCfg: cfg handle |
| * @mac_params: mac params |
| * |
| * Return: none |
| */ |
| static |
| void ol_cfg_update_bundle_params(struct txrx_pdev_cfg_param_t *olCfg, |
| tMacOpenParameters *mac_params) |
| { |
| olCfg->pkt_bundle_timer_value = mac_params->pkt_bundle_timer_value; |
| olCfg->pkt_bundle_size = mac_params->pkt_bundle_size; |
| } |
| #else |
| static |
| void ol_cfg_update_bundle_params(struct txrx_pdev_cfg_param_t *olCfg, |
| tMacOpenParameters *mac_params) |
| { |
| return; |
| } |
| #endif |
| |
| |
| /** |
| * ol_cfg_update_ac_specs_params() - update ac_specs params |
| * @olcfg: cfg handle |
| * @mac_params: mac params |
| * |
| * Return: none |
| */ |
| void ol_cfg_update_ac_specs_params(struct txrx_pdev_cfg_param_t *olcfg, |
| tMacOpenParameters *mac_params) |
| { |
| int i; |
| |
| if (NULL == olcfg) |
| return; |
| |
| if (NULL == mac_params) |
| return; |
| |
| for (i = 0; i < OL_TX_NUM_WMM_AC; i++) { |
| olcfg->ac_specs[i].wrr_skip_weight = |
| mac_params->ac_specs[i].wrr_skip_weight; |
| olcfg->ac_specs[i].credit_threshold = |
| mac_params->ac_specs[i].credit_threshold; |
| olcfg->ac_specs[i].send_limit = |
| mac_params->ac_specs[i].send_limit; |
| olcfg->ac_specs[i].credit_reserve = |
| mac_params->ac_specs[i].credit_reserve; |
| olcfg->ac_specs[i].discard_weight = |
| mac_params->ac_specs[i].discard_weight; |
| } |
| } |
| |
| #ifdef FEATURE_RUNTIME_PM |
| /** |
| * wma_runtime_context_init() - API to init wma runtime contexts |
| * @handle: wma handle |
| * |
| * The API initializes the wma runtime contexts for beaconing interfaces |
| * and the context to synchronize runtime suspend/resume. |
| * |
| * Return: void |
| */ |
| static void wma_runtime_context_init(tp_wma_handle handle) |
| { |
| tp_wma_handle wma_handle = handle; |
| struct wma_runtime_pm_context *runtime_context = |
| &wma_handle->runtime_context; |
| |
| runtime_context->ap = |
| vos_runtime_pm_prevent_suspend_init("wma_runtime_ap"); |
| runtime_context->resume = |
| vos_runtime_pm_prevent_suspend_init("wma_runtime_resume"); |
| } |
| |
| /** |
| * wma_runtime_context_deinit() - API to deinit wma runtime contexts |
| * @handle: wma handle |
| * |
| * The API deinitializes the wma runtime contexts for beaconing interfaces |
| * and the context to synchronize runtime suspend/resume. |
| * |
| * Return: void |
| */ |
| static void wma_runtime_context_deinit(tp_wma_handle handle) |
| { |
| tp_wma_handle wma_handle = handle; |
| struct wma_runtime_pm_context *runtime_context = |
| &wma_handle->runtime_context; |
| |
| vos_runtime_pm_prevent_suspend_deinit(runtime_context->ap); |
| runtime_context->ap = NULL; |
| vos_runtime_pm_prevent_suspend_deinit( |
| runtime_context->resume); |
| runtime_context->resume = NULL; |
| } |
| #else |
| static void wma_runtime_context_init(tp_wma_handle handle) { } |
| static void wma_runtime_context_deinit(tp_wma_handle handle) { } |
| #endif |
| |
| /** |
| * wma_state_info_dump() - prints state information of wma layer |
| * @buf: buffer pointer |
| * @size: size of buffer to be filled |
| * |
| * This function is used to dump state information of wma layer |
| * |
| * Return: None |
| */ |
| static void wma_state_info_dump(char **buf_ptr, uint16_t *size) |
| { |
| tp_wma_handle wma_handle; |
| pVosContextType vos_context; |
| uint16_t len = 0; |
| char *buf = *buf_ptr; |
| |
| vos_context = vos_get_global_context(VOS_MODULE_ID_VOSS, NULL); |
| if (!vos_context) { |
| VOS_ASSERT(0); |
| return; |
| } |
| |
| wma_handle = (tp_wma_handle)vos_get_context(VOS_MODULE_ID_WDA, |
| vos_context); |
| if (!wma_handle) { |
| WMA_LOGE("%s: WMA context is invald!", __func__); |
| return; |
| } |
| |
| WMA_LOGI("%s: size of buffer: %d", __func__, *size); |
| |
| len += vos_scnprintf(buf + len, *size - len, |
| "\n wow_pno_match_wake_up_count %d", |
| wma_handle->wow_pno_match_wake_up_count); |
| len += vos_scnprintf(buf + len, *size - len, |
| "\n wow_pno_complete_wake_up_count %d", |
| wma_handle->wow_pno_complete_wake_up_count); |
| len += vos_scnprintf(buf + len, *size - len, |
| "\n wow_gscan_wake_up_count %d", |
| wma_handle->wow_gscan_wake_up_count); |
| len += vos_scnprintf(buf + len, *size - len, |
| "\n wow_low_rssi_wake_up_count %d", |
| wma_handle->wow_low_rssi_wake_up_count); |
| len += vos_scnprintf(buf + len, *size - len, |
| "\n wow_rssi_breach_wake_up_count %d", |
| wma_handle->wow_rssi_breach_wake_up_count); |
| len += vos_scnprintf(buf + len, *size - len, |
| "\n wow_ucast_wake_up_count %d", |
| wma_handle->wow_ucast_wake_up_count); |
| len += vos_scnprintf(buf + len, *size - len, |
| "\n wow_bcast_wake_up_count %d", |
| wma_handle->wow_bcast_wake_up_count); |
| len += vos_scnprintf(buf + len, *size - len, |
| "\n wow_ipv4_mcast_wake_up_count %d", |
| wma_handle->wow_ipv4_mcast_wake_up_count); |
| len += vos_scnprintf(buf + len, *size - len, |
| "\n wow_ipv6_mcast_ra_stats %d", |
| wma_handle->wow_ipv6_mcast_ra_stats); |
| len += vos_scnprintf(buf + len, *size - len, |
| "\n wow_ipv6_mcast_ns_stats %d", |
| wma_handle->wow_ipv6_mcast_ns_stats); |
| len += vos_scnprintf(buf + len, *size - len, |
| "\n wow_ipv6_mcast_na_stats %d", |
| wma_handle->wow_ipv6_mcast_na_stats); |
| len += vos_scnprintf(buf + len, *size - len, |
| "\n wow_oem_response_wake_up_count %d", |
| wma_handle->wow_oem_response_wake_up_count); |
| |
| *size -= len; |
| *buf_ptr += len; |
| } |
| |
| /** |
| * wma_register_debug_callback() - registration function for wma layer |
| * to print wma state information |
| */ |
| static void wma_register_debug_callback(void) |
| { |
| vos_register_debug_callback(VOS_MODULE_ID_WDA, &wma_state_info_dump); |
| } |
| |
| /** |
| * wma_action_frame_filter_mac_event_handler() - action frame filter evt handler |
| * @handle: wma handle |
| * @event_buf: event handler data |
| * @len: length of @event_buf |
| * |
| * this function will handle the |
| * WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_STATUS_EVENTID |
| * |
| * Return: int |
| */ |
| static int |
| wma_action_frame_filter_mac_event_handler(void *handle, u_int8_t *event_buf, |
| u_int32_t len) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle)handle; |
| WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_STATUS_EVENTID_param_tlvs *param_buf; |
| wmi_vdev_add_mac_addr_to_rx_filter_status_event_fixed_param *event; |
| struct action_frame_random_filter *filter; |
| struct wma_txrx_node *intr; |
| bool status = false; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| |
| param_buf = |
| (WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_STATUS_EVENTID_param_tlvs *)event_buf; |
| if (!param_buf) { |
| WMA_LOGA(FL("Invalid action frame filter mac event")); |
| return -EINVAL; |
| } |
| event = param_buf->fixed_param; |
| if (!event) { |
| WMA_LOGA(FL("Invalid fixed param")); |
| return -EINVAL; |
| } |
| |
| intr = &wma_handle->interfaces[event->vdev_id]; |
| /* command is in progess */ |
| if(!intr->action_frame_filter) { |
| WMA_LOGE(FL("no action frame req is pending - invalid event")); |
| return -1; |
| } |
| filter = intr->action_frame_filter; |
| if (event->status) |
| status = true; |
| |
| (filter->callback)(status, filter->context); |
| intr->action_frame_filter = NULL; |
| vos_mem_free(filter); |
| |
| return 0; |
| } |
| |
| struct wma_version_info g_wmi_version_info; |
| |
| /* |
| * Allocate and init wmi adaptation layer. |
| */ |
| VOS_STATUS WDA_open(v_VOID_t *vos_context, v_VOID_t *os_ctx, |
| wda_tgt_cfg_cb tgt_cfg_cb, |
| wda_dfs_radar_indication_cb radar_ind_cb, |
| wda_dfs_block_tx_cb dfs_block_tx_cb, |
| tMacOpenParameters *mac_params) |
| { |
| tp_wma_handle wma_handle; |
| HTC_HANDLE htc_handle; |
| adf_os_device_t adf_dev; |
| v_VOID_t *wmi_handle; |
| VOS_STATUS vos_status; |
| struct ol_softc *scn; |
| struct txrx_pdev_cfg_param_t olCfg = {0}; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| |
| g_wmi_version_info.major = __WMI_VER_MAJOR_; |
| g_wmi_version_info.minor = __WMI_VER_MINOR_; |
| g_wmi_version_info.revision = __WMI_REVISION_; |
| |
| adf_dev = vos_get_context(VOS_MODULE_ID_ADF, vos_context); |
| htc_handle = vos_get_context(VOS_MODULE_ID_HTC, vos_context); |
| |
| if (!htc_handle) { |
| WMA_LOGP("%s: Invalid HTC handle", __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| /* Alloc memory for WMA Context */ |
| vos_status = vos_alloc_context(vos_context, VOS_MODULE_ID_WDA, |
| (v_VOID_t **) &wma_handle, |
| sizeof (t_wma_handle)); |
| |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGP("%s: Memory allocation failed for wma_handle", |
| __func__); |
| return vos_status; |
| } |
| |
| vos_mem_zero(wma_handle, sizeof (t_wma_handle)); |
| |
| if (vos_get_conparam() != VOS_FTM_MODE) { |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| vos_wake_lock_init(&wma_handle->pno_wake_lock, "wlan_pno_wl"); |
| #endif |
| #ifdef FEATURE_WLAN_EXTSCAN |
| vos_wake_lock_init(&wma_handle->extscan_wake_lock, |
| "wlan_extscan_wl"); |
| #endif |
| vos_wake_lock_init(&wma_handle->wow_wake_lock, |
| "wlan_wow_wl"); |
| vos_wake_lock_init(&wma_handle->wow_auth_req_wl, |
| "wlan_auth_req_wl"); |
| vos_wake_lock_init(&wma_handle->wow_assoc_req_wl, |
| "wlan_assoc_req_wl"); |
| vos_wake_lock_init(&wma_handle->wow_deauth_rec_wl, |
| "wlan_deauth_rec_wl"); |
| vos_wake_lock_init(&wma_handle->wow_disassoc_rec_wl, |
| "wlan_disassoc_rec_wl"); |
| vos_wake_lock_init(&wma_handle->wow_ap_assoc_lost_wl, |
| "wlan_ap_assoc_lost_wl"); |
| vos_wake_lock_init(&wma_handle->wow_auto_shutdown_wl, |
| "wlan_auto_shutdown_wl"); |
| } |
| |
| /* attach the wmi */ |
| wmi_handle = wmi_unified_attach(wma_handle, wma_wow_tx_complete); |
| if (!wmi_handle) { |
| WMA_LOGP("%s: failed to attach WMI", __func__); |
| vos_status = VOS_STATUS_E_NOMEM; |
| goto err_wma_handle; |
| } |
| |
| WMA_LOGA("WMA --> wmi_unified_attach - success"); |
| |
| /* Save the WMI & HTC handle */ |
| wma_handle->wmi_handle = wmi_handle; |
| wma_handle->htc_handle = htc_handle; |
| wma_handle->vos_context = vos_context; |
| wma_handle->adf_dev = adf_dev; |
| |
| wma_runtime_context_init(wma_handle); |
| |
| /* initialize default target config */ |
| wma_set_default_tgt_config(wma_handle); |
| |
| #ifdef IPA_UC_OFFLOAD |
| olCfg.is_uc_offload_enabled = mac_params->ucOffloadEnabled; |
| olCfg.uc_tx_buffer_count = mac_params->ucTxBufCount; |
| olCfg.uc_tx_buffer_size = mac_params->ucTxBufSize; |
| olCfg.uc_rx_indication_ring_count = mac_params->ucRxIndRingCount; |
| olCfg.uc_tx_partition_base = mac_params->ucTxPartitionBase; |
| #endif /* IPA_UC_OFFLOAD*/ |
| |
| wma_handle->tx_chain_mask_cck = mac_params->tx_chain_mask_cck; |
| wma_handle->self_gen_frm_pwr = mac_params->self_gen_frm_pwr; |
| wma_handle->max_mgmt_tx_fail_count = mac_params->max_mgmt_tx_fail_count; |
| /* Allocate cfg handle */ |
| |
| /* RX Full reorder should enable for PCIe, ROME3.X project only now |
| * MDM should enable later, schedule TBD |
| * HL also sdould be enabled, schedule TBD */ |
| #ifdef WLAN_FEATURE_RX_FULL_REORDER_OL |
| olCfg.is_full_reorder_offload = mac_params->reorderOffload; |
| #else |
| olCfg.is_full_reorder_offload = 0; |
| #endif |
| |
| ol_cfg_update_bundle_params(&olCfg, mac_params); |
| cfg_update_del_ack_params(&olCfg, mac_params); |
| ol_cfg_update_ac_specs_params(&olCfg, mac_params); |
| wma_update_ptp_params(&olCfg, mac_params); |
| ((pVosContextType) vos_context)->cfg_ctx = |
| ol_pdev_cfg_attach(((pVosContextType) vos_context)->adf_ctx, olCfg); |
| if (!(((pVosContextType) vos_context)->cfg_ctx)) { |
| WMA_LOGP("%s: failed to init cfg handle", __func__); |
| vos_status = VOS_STATUS_E_NOMEM; |
| goto err_wmi_handle; |
| } |
| |
| /* adjust the cfg_ctx default value based on setting */ |
| wdi_in_set_cfg_rx_fwd_disabled((ol_pdev_handle)((pVosContextType)vos_context)->cfg_ctx, |
| (u_int8_t)mac_params->apDisableIntraBssFwd); |
| |
| /* adjust the packet log enable default value based on CFG INI setting */ |
| wdi_in_set_cfg_pakcet_log_enabled((ol_pdev_handle) |
| ((pVosContextType)vos_context)->cfg_ctx, (u_int8_t)vos_is_packet_log_enabled()); |
| |
| /* adjust the ptp rx option default value based on CFG INI setting */ |
| wdi_in_set_cfg_ptp_rx_opt_enabled((ol_pdev_handle) |
| ((pVosContextType) |
| vos_context)->cfg_ctx, |
| (u_int8_t) |
| vos_is_ptp_rx_opt_enabled()); |
| |
| /* Allocate dfs_ic and initialize DFS */ |
| wma_handle->dfs_ic = wma_dfs_attach(wma_handle->dfs_ic); |
| if(wma_handle->dfs_ic == NULL) { |
| WMA_LOGE("%s: Memory allocation failed for dfs_ic", __func__); |
| goto err_wmi_handle; |
| } |
| |
| #if defined(QCA_WIFI_FTM) |
| if (vos_get_conparam() == VOS_FTM_MODE) |
| wma_utf_attach(wma_handle); |
| #endif |
| |
| /*TODO: Recheck below parameters */ |
| scn = vos_get_context(VOS_MODULE_ID_HIF, vos_context); |
| |
| if (NULL == scn) { |
| WMA_LOGE("%s: Failed to get scn",__func__); |
| vos_status = VOS_STATUS_E_NOMEM; |
| goto err_scn_context; |
| } |
| |
| mac_params->maxStation = ol_get_number_of_peers_supported(scn); |
| |
| mac_params->maxBssId = WMA_MAX_SUPPORTED_BSS; |
| mac_params->frameTransRequired = 0; |
| |
| #ifdef WLAN_FEATURE_LPSS |
| wma_handle->is_lpass_enabled = mac_params->is_lpass_enabled; |
| #endif |
| wma_set_nan_enable(wma_handle, mac_params); |
| |
| wma_handle->wlan_resource_config.num_wow_filters = mac_params->maxWoWFilters; |
| wma_handle->wlan_resource_config.num_keep_alive_pattern = WMA_MAXNUM_PERIODIC_TX_PTRNS; |
| |
| /* The current firmware implementation requires the number of offload peers |
| * should be (number of vdevs + 1). |
| */ |
| wma_handle->wlan_resource_config.num_offload_peers = |
| mac_params->apMaxOffloadPeers + 1; |
| |
| wma_handle->wlan_resource_config.num_offload_reorder_buffs = |
| mac_params->apMaxOffloadReorderBuffs + 1; |
| |
| wma_handle->ol_ini_info = mac_params->olIniInfo; |
| wma_handle->max_station = mac_params->maxStation; |
| wma_handle->max_bssid = mac_params->maxBssId; |
| wma_handle->frame_xln_reqd = mac_params->frameTransRequired; |
| wma_handle->driver_type = mac_params->driverType; |
| wma_handle->ssdp = mac_params->ssdp; |
| wma_handle->enable_mc_list = mac_params->enable_mc_list; |
| wma_handle->enable_bcst_ptrn = mac_params->enable_bcst_ptrn; |
| wma_handle->bpf_packet_filter_enable = |
| mac_params->bpf_packet_filter_enable; |
| #ifdef FEATURE_WLAN_RA_FILTERING |
| wma_handle->IsRArateLimitEnabled = mac_params->IsRArateLimitEnabled; |
| wma_handle->RArateLimitInterval = mac_params->RArateLimitInterval; |
| #endif |
| /* |
| * Indicates if DFS Phyerr filtering offload |
| * is Enabled/Disabed from ini |
| */ |
| wma_handle->dfs_phyerr_filter_offload = |
| mac_params->dfsPhyerrFilterOffload; |
| wma_handle->dfs_pri_multiplier = |
| mac_params->dfsRadarPriMultiplier; |
| wma_handle->interfaces = vos_mem_malloc(sizeof(struct wma_txrx_node) * |
| wma_handle->max_bssid); |
| if (!wma_handle->interfaces) { |
| WMA_LOGP("%s: failed to allocate interface table", __func__); |
| vos_status = VOS_STATUS_E_NOMEM; |
| goto err_scn_context; |
| } |
| vos_mem_zero(wma_handle->interfaces, sizeof(struct wma_txrx_node) * |
| wma_handle->max_bssid); |
| /* Register the debug print event handler */ |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_DEBUG_PRINT_EVENTID, |
| wma_unified_debug_print_event_handler); |
| |
| wma_handle->tgt_cfg_update_cb = tgt_cfg_cb; |
| wma_handle->dfs_radar_indication_cb = radar_ind_cb; |
| wma_handle->dfs_block_tx_cb = dfs_block_tx_cb; |
| |
| vos_status = vos_event_init(&wma_handle->wma_ready_event); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGP("%s: wma_ready_event initialization failed", __func__); |
| goto err_event_init; |
| } |
| vos_status = vos_event_init(&wma_handle->target_suspend); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGP("%s: target suspend event initialization failed", |
| __func__); |
| goto err_event_init; |
| } |
| |
| vos_status = vos_event_init(&wma_handle->wow_tx_complete); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGP("%s: wow_tx_complete event initialization failed", |
| __func__); |
| goto err_event_init; |
| } |
| |
| /* Init Tx Frame Complete event */ |
| vos_status = vos_event_init(&wma_handle->tx_frm_download_comp_event); |
| if (!VOS_IS_STATUS_SUCCESS(vos_status)) { |
| WMA_LOGP("%s: failed to init tx_frm_download_comp_event", |
| __func__); |
| goto err_event_init; |
| } |
| |
| /* Init tx queue empty check event */ |
| vos_status = vos_event_init(&wma_handle->tx_queue_empty_event); |
| if (!VOS_IS_STATUS_SUCCESS(vos_status)) { |
| WMA_LOGP("%s: failed to init tx_queue_empty_event", |
| __func__); |
| goto err_event_init; |
| } |
| |
| vos_status = vos_event_init(&wma_handle->wma_resume_event); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGP("%s: wma_resume_event initialization failed", __func__); |
| goto err_event_init; |
| } |
| |
| vos_status = vos_event_init(&wma_handle->runtime_suspend); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGP("%s: runtime suspend event initialization failed", |
| __func__); |
| goto err_event_init; |
| } |
| |
| vos_status = vos_event_init(&wma_handle->recovery_event); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGP("%s: recovery event initialization failed", __func__); |
| goto err_event_init; |
| } |
| |
| INIT_LIST_HEAD(&wma_handle->vdev_resp_queue); |
| adf_os_spinlock_init(&wma_handle->vdev_respq_lock); |
| adf_os_spinlock_init(&wma_handle->vdev_detach_lock); |
| adf_os_spinlock_init(&wma_handle->roam_preauth_lock); |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| adf_os_spinlock_init(&wma_handle->roam_synch_lock); |
| #endif |
| adf_os_atomic_init(&wma_handle->is_wow_bus_suspended); |
| adf_os_atomic_init(&wma_handle->dfs_wmi_event_pending); |
| adf_os_atomic_init(&wma_handle->dfs_wmi_event_dropped); |
| |
| /* Register vdev start response event handler */ |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_VDEV_START_RESP_EVENTID, |
| wma_vdev_start_resp_handler); |
| |
| /* Register vdev stop response event handler */ |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_VDEV_STOPPED_EVENTID, |
| wma_vdev_stop_resp_handler); |
| |
| /* register for STA kickout function */ |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_PEER_STA_KICKOUT_EVENTID, |
| wma_peer_sta_kickout_event_handler); |
| |
| /* register for stats response event */ |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_UPDATE_STATS_EVENTID, |
| wma_stats_event_handler); |
| /* register for peer info response event */ |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_PEER_STATS_INFO_EVENTID, |
| wma_peer_info_event_handler); |
| |
| /* register for linkspeed response event */ |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_PEER_ESTIMATED_LINKSPEED_EVENTID, |
| wma_link_speed_event_handler); |
| |
| #ifdef FEATURE_OEM_DATA_SUPPORT |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_OEM_CAPABILITY_EVENTID, |
| wma_oem_capability_event_callback); |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_OEM_MEASUREMENT_REPORT_EVENTID, |
| wma_oem_measurement_report_event_callback); |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_OEM_ERROR_REPORT_EVENTID, |
| wma_oem_error_report_event_callback); |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_OEM_RESPONSE_EVENTID, |
| wma_oem_data_response_handler); |
| #endif |
| /* |
| * Register appropriate DFS phyerr event handler for |
| * Phyerror events. Handlers differ for phyerr filtering |
| * offload enable and disable cases. |
| */ |
| wma_register_dfs_event_handler(wma_handle); |
| |
| /* Register peer change event handler */ |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_PEER_STATE_EVENTID, |
| wma_peer_state_change_event_handler); |
| |
| |
| /* Register beacon tx complete event id. The event is required |
| * for sending channel switch announcement frames |
| */ |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_OFFLOAD_BCN_TX_STATUS_EVENTID, |
| wma_unified_bcntx_status_event_handler); |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_UPDATE_VDEV_RATE_STATS_EVENTID, |
| wma_link_status_event_handler); |
| #ifdef WLAN_FEATURE_LINK_LAYER_STATS |
| /* Register event handler for processing Link Layer Stats |
| * response from the FW |
| */ |
| wma_register_ll_stats_event_handler(wma_handle); |
| |
| #endif /* WLAN_FEATURE_LINK_LAYER_STATS */ |
| |
| wmi_set_tgt_assert(wma_handle->wmi_handle, |
| mac_params->force_target_assert_enabled); |
| /* Firmware debug log */ |
| vos_status = dbglog_init(wma_handle->wmi_handle); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGP("%s: Firmware Dbglog initialization failed", __func__); |
| goto err_dbglog_init; |
| } |
| |
| /* |
| * Update Powersave mode |
| * 1 - Legacy Powersave + Deepsleep Disabled |
| * 2 - QPower + Deepsleep Disabled |
| * 3 - Legacy Powersave + Deepsleep Enabled |
| * 4 - QPower + Deepsleep Enabled |
| */ |
| wma_handle->powersave_mode = mac_params->powersaveOffloadEnabled; |
| wma_handle->staMaxLIModDtim = mac_params->staMaxLIModDtim; |
| wma_handle->staModDtim = mac_params->staModDtim; |
| wma_handle->staDynamicDtim = mac_params->staDynamicDtim; |
| |
| /* |
| * Value of mac_params->wowEnable can be, |
| * 0 - Disable both magic pattern match and pattern byte match. |
| * 1 - Enable magic pattern match on all interfaces. |
| * 2 - Enable pattern byte match on all interfaces. |
| * 3 - Enable both magic patter and pattern byte match on |
| * all interfaces. |
| */ |
| wma_handle->wow.magic_ptrn_enable = |
| (mac_params->wowEnable & 0x01) ? TRUE : FALSE; |
| wma_handle->ptrn_match_enable_all_vdev = |
| (mac_params->wowEnable & 0x02) ? TRUE : FALSE; |
| |
| #ifdef FEATURE_WLAN_TDLS |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_TDLS_PEER_EVENTID, |
| wma_tdls_event_handler); |
| #endif /* FEATURE_WLAN_TDLS */ |
| |
| /* register for install key completion event */ |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, |
| wma_vdev_install_key_complete_event_handler); |
| #ifdef WLAN_FEATURE_NAN |
| /* register for nan response event */ |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_NAN_EVENTID, |
| wma_nan_rsp_event_handler); |
| #endif |
| |
| #ifdef WLAN_FEATURE_STATS_EXT |
| /* register for extended stats event */ |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_STATS_EXT_EVENTID, |
| wma_stats_ext_event_handler); |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_REPORT_RX_AGGR_FAILURE_EVENTID, |
| wma_rx_aggr_failure_event_handler); |
| #endif |
| #ifdef FEATURE_WLAN_EXTSCAN |
| wma_register_extscan_event_handler(wma_handle); |
| #endif |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_PDEV_DIV_RSSI_ANTID_EVENTID, |
| wma_pdev_div_info_evt_handler); |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_BPF_CAPABILIY_INFO_EVENTID, |
| wma_get_bpf_caps_event_handler); |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_PDEV_CHIP_POWER_STATS_EVENTID, |
| wma_unified_power_debug_stats_event_handler); |
| |
| WMA_LOGD("%s: Exit", __func__); |
| |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_ROAM_SYNCH_EVENTID, |
| wma_roam_synch_event_handler); |
| #endif /* WLAN_FEATURE_ROAM_OFFLOAD */ |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_RSSI_BREACH_EVENTID, |
| wma_rssi_breached_event_handler); |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_CHAN_INFO_EVENTID, |
| wma_chan_info_event_handler); |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_STATUS_EVENTID, |
| wma_action_frame_filter_mac_event_handler); |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_PDEV_CHIP_POWER_SAVE_FAILURE_DETECTED_EVENTID, |
| wma_chip_power_save_failure_detected_handler); |
| |
| wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_COEX_REPORT_ANTENNA_ISOLATION_EVENTID, |
| wma_antenna_isolation_event_handler); |
| |
| wma_register_debug_callback(); |
| wma_ndp_register_all_event_handlers(wma_handle); |
| |
| return VOS_STATUS_SUCCESS; |
| |
| err_dbglog_init: |
| adf_os_spinlock_destroy(&wma_handle->vdev_respq_lock); |
| adf_os_spinlock_destroy(&wma_handle->vdev_detach_lock); |
| adf_os_spinlock_destroy(&wma_handle->roam_preauth_lock); |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| adf_os_spinlock_destroy(&wma_handle->roam_synch_lock); |
| #endif |
| err_event_init: |
| wmi_unified_unregister_event_handler(wma_handle->wmi_handle, |
| WMI_DEBUG_PRINT_EVENTID); |
| vos_mem_free(wma_handle->interfaces); |
| err_scn_context: |
| wma_dfs_detach(wma_handle->dfs_ic); |
| #if defined(QCA_WIFI_FTM) |
| wma_utf_detach(wma_handle); |
| #endif |
| err_wmi_handle: |
| adf_os_mem_free(((pVosContextType) vos_context)->cfg_ctx); |
| OS_FREE(wmi_handle); |
| |
| err_wma_handle: |
| |
| if (vos_get_conparam() != VOS_FTM_MODE) { |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| vos_wake_lock_destroy(&wma_handle->pno_wake_lock); |
| #endif |
| #ifdef FEATURE_WLAN_EXTSCAN |
| vos_wake_lock_destroy(&wma_handle->extscan_wake_lock); |
| #endif |
| vos_wake_lock_destroy(&wma_handle->wow_wake_lock); |
| vos_wake_lock_destroy(&wma_handle->wow_auth_req_wl); |
| vos_wake_lock_destroy(&wma_handle->wow_assoc_req_wl); |
| vos_wake_lock_destroy(&wma_handle->wow_deauth_rec_wl); |
| vos_wake_lock_destroy(&wma_handle->wow_disassoc_rec_wl); |
| vos_wake_lock_destroy(&wma_handle->wow_ap_assoc_lost_wl); |
| vos_wake_lock_destroy(&wma_handle->wow_auto_shutdown_wl); |
| } |
| |
| wma_runtime_context_deinit(wma_handle); |
| vos_free_context(vos_context, VOS_MODULE_ID_WDA, wma_handle); |
| |
| WMA_LOGD("%s: Exit", __func__); |
| |
| return vos_status; |
| } |
| |
| /* function : wma_pre_start |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_pre_start(v_VOID_t *vos_ctx) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| A_STATUS status = A_OK; |
| tp_wma_handle wma_handle; |
| vos_msg_t wma_msg = {0} ; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| |
| wma_handle = vos_get_context(VOS_MODULE_ID_WDA, vos_ctx); |
| |
| /* Validate the wma_handle */ |
| if (NULL == wma_handle) { |
| WMA_LOGP("%s: invalid argument", __func__); |
| vos_status = VOS_STATUS_E_INVAL; |
| goto end; |
| } |
| /* Open endpoint for ctrl path - WMI <--> HTC */ |
| status = wmi_unified_connect_htc_service( |
| wma_handle->wmi_handle, |
| wma_handle->htc_handle); |
| if (A_OK != status) { |
| WMA_LOGP("%s: wmi_unified_connect_htc_service", __func__); |
| vos_status = VOS_STATUS_E_FAULT; |
| goto end; |
| } |
| |
| WMA_LOGA("WMA --> wmi_unified_connect_htc_service - success"); |
| |
| /* Trigger the CFG DOWNLOAD */ |
| wma_msg.type = WNI_CFG_DNLD_REQ ; |
| wma_msg.bodyptr = NULL; |
| wma_msg.bodyval = 0; |
| |
| vos_status = vos_mq_post_message( VOS_MQ_ID_WDA, &wma_msg ); |
| if (VOS_STATUS_SUCCESS !=vos_status) { |
| WMA_LOGP("%s: Failed to post WNI_CFG_DNLD_REQ msg", __func__); |
| VOS_ASSERT(0); |
| vos_status = VOS_STATUS_E_FAILURE; |
| } |
| end: |
| WMA_LOGD("%s: Exit", __func__); |
| return vos_status; |
| } |
| |
| /* function : wma_send_msg |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| void wma_send_msg(tp_wma_handle wma_handle, u_int16_t msg_type, |
| void *body_ptr, u_int32_t body_val) |
| { |
| tSirMsgQ msg = {0} ; |
| tANI_U32 status = VOS_STATUS_SUCCESS ; |
| tpAniSirGlobal pMac = (tpAniSirGlobal )vos_get_context(VOS_MODULE_ID_PE, |
| wma_handle->vos_context); |
| msg.type = msg_type; |
| msg.bodyval = body_val; |
| msg.bodyptr = body_ptr; |
| status = limPostMsgApi(pMac, &msg); |
| if (VOS_STATUS_SUCCESS != status) { |
| if(NULL != body_ptr) |
| vos_mem_free(body_ptr); |
| VOS_ASSERT(0) ; |
| } |
| return ; |
| } |
| |
| /* function : wma_get_txrx_vdev_type |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| enum wlan_op_mode wma_get_txrx_vdev_type(u_int32_t type) |
| { |
| enum wlan_op_mode vdev_type = wlan_op_mode_unknown; |
| switch (type) { |
| case WMI_VDEV_TYPE_AP: |
| vdev_type = wlan_op_mode_ap; |
| break; |
| case WMI_VDEV_TYPE_STA: |
| vdev_type = wlan_op_mode_sta; |
| break; |
| #ifdef QCA_IBSS_SUPPORT |
| case WMI_VDEV_TYPE_IBSS: |
| vdev_type = wlan_op_mode_ibss; |
| break; |
| #endif |
| case WMI_VDEV_TYPE_OCB: |
| vdev_type = wlan_op_mode_ocb; |
| break; |
| case WMI_VDEV_TYPE_NDI: |
| vdev_type = wlan_op_mode_ndi; |
| break; |
| case WMI_VDEV_TYPE_MONITOR: |
| vdev_type = wlan_op_mode_monitor; |
| break; |
| default: |
| WMA_LOGE("Invalid vdev type %u", type); |
| vdev_type = wlan_op_mode_unknown; |
| } |
| |
| return vdev_type; |
| } |
| |
| /* function : wma_unified_vdev_create_send |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| int wma_unified_vdev_create_send(wmi_unified_t wmi_handle, u_int8_t if_id, |
| u_int32_t type, u_int32_t subtype, |
| u_int8_t macaddr[IEEE80211_ADDR_LEN], |
| u_int8_t nss_2g, u_int8_t nss_5g) |
| { |
| wmi_vdev_create_cmd_fixed_param* cmd; |
| wmi_buf_t buf; |
| int len = sizeof(*cmd); |
| int ret; |
| int num_bands = 2; |
| u_int8_t *buf_ptr; |
| wmi_vdev_txrx_streams *txrx_streams; |
| |
| len += (num_bands * sizeof(wmi_vdev_txrx_streams) + WMI_TLV_HDR_SIZE); |
| |
| buf = wmi_buf_alloc(wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s:wmi_buf_alloc failed", __FUNCTION__); |
| return ENOMEM; |
| } |
| cmd = (wmi_vdev_create_cmd_fixed_param *)wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_create_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vdev_create_cmd_fixed_param)); |
| cmd->vdev_id = if_id; |
| cmd->vdev_type = type; |
| cmd->vdev_subtype = subtype; |
| cmd->num_cfg_txrx_streams = num_bands; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(macaddr, &cmd->vdev_macaddr); |
| WMA_LOGE("%s: ID = %d VAP Addr = %02x:%02x:%02x:%02x:%02x:%02x", |
| __func__, if_id, |
| macaddr[0], macaddr[1], macaddr[2], |
| macaddr[3], macaddr[4], macaddr[5]); |
| |
| buf_ptr = (u_int8_t *)cmd + sizeof(*cmd); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| (num_bands * sizeof(wmi_vdev_txrx_streams))); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| WMA_LOGD("%s: type %d, subtype %d, nss_2g %d, nss_5g %d", __func__, |
| type, subtype, nss_2g, nss_5g); |
| txrx_streams = (wmi_vdev_txrx_streams *)buf_ptr; |
| txrx_streams->band = WMI_TPC_CHAINMASK_CONFIG_BAND_2G; |
| txrx_streams->supported_tx_streams = nss_2g; |
| txrx_streams->supported_rx_streams = nss_2g; |
| WMITLV_SET_HDR(&txrx_streams->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_txrx_streams, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_vdev_txrx_streams)); |
| |
| buf_ptr += sizeof(wmi_vdev_txrx_streams); |
| txrx_streams = (wmi_vdev_txrx_streams *)buf_ptr; |
| txrx_streams->band = WMI_TPC_CHAINMASK_CONFIG_BAND_5G; |
| txrx_streams->supported_tx_streams = nss_5g; |
| txrx_streams->supported_rx_streams = nss_5g; |
| WMITLV_SET_HDR(&txrx_streams->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_txrx_streams, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_vdev_txrx_streams)); |
| ret = wmi_unified_cmd_send(wmi_handle, buf, len, WMI_VDEV_CREATE_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE("Failed to send WMI_VDEV_CREATE_CMDID"); |
| wmi_buf_free(buf); |
| } |
| return ret; |
| } |
| |
| /* function : wma_unified_vdev_delete_send |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| static int wma_unified_vdev_delete_send(wmi_unified_t wmi_handle, u_int8_t if_id) |
| { |
| wmi_vdev_delete_cmd_fixed_param* cmd; |
| wmi_buf_t buf; |
| int ret; |
| |
| buf = wmi_buf_alloc(wmi_handle, sizeof(*cmd)); |
| if (!buf) { |
| WMA_LOGP("%s:wmi_buf_alloc failed", __FUNCTION__); |
| return ENOMEM; |
| } |
| |
| cmd = (wmi_vdev_delete_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_delete_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vdev_delete_cmd_fixed_param)); |
| cmd->vdev_id = if_id; |
| ret = wmi_unified_cmd_send(wmi_handle, buf, sizeof(wmi_vdev_delete_cmd_fixed_param), |
| WMI_VDEV_DELETE_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE("Failed to send WMI_VDEV_DELETE_CMDID"); |
| wmi_buf_free(buf); |
| } |
| return ret; |
| } |
| |
| void wma_vdev_detach_callback(void *ctx) |
| { |
| tp_wma_handle wma; |
| struct wma_txrx_node *iface = (struct wma_txrx_node *)ctx; |
| tpDelStaSelfParams param; |
| struct wma_target_req *req_msg; |
| |
| wma = vos_get_context(VOS_MODULE_ID_WDA, |
| vos_get_global_context(VOS_MODULE_ID_WDA, NULL)); |
| |
| if (!wma || !iface->del_staself_req) { |
| WMA_LOGP("%s: wma %pK iface %pK", __func__, wma, |
| iface->del_staself_req); |
| return; |
| } |
| param = (tpDelStaSelfParams) iface->del_staself_req; |
| WMA_LOGD("%s: sending WDA_DEL_STA_SELF_RSP for vdev %d", |
| __func__, param->sessionId); |
| |
| req_msg = wma_find_vdev_req(wma, param->sessionId, |
| WMA_TARGET_REQ_TYPE_VDEV_DEL); |
| if (req_msg) { |
| WMA_LOGD("%s: Found vdev request for vdev id %d", |
| __func__, param->sessionId); |
| vos_timer_stop(&req_msg->event_timeout); |
| vos_timer_destroy(&req_msg->event_timeout); |
| adf_os_mem_free(req_msg); |
| } |
| if(iface->addBssStaContext) |
| adf_os_mem_free(iface->addBssStaContext); |
| |
| #if defined WLAN_FEATURE_VOWIFI_11R |
| if (iface->staKeyParams) |
| adf_os_mem_free(iface->staKeyParams); |
| #endif |
| vos_mem_zero(iface, sizeof(*iface)); |
| param->status = VOS_STATUS_SUCCESS; |
| |
| wma_send_msg(wma, WDA_DEL_STA_SELF_RSP, (void *)param, 0); |
| } |
| |
| /* function : wma_vdev_detach |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| static VOS_STATUS wma_vdev_detach(tp_wma_handle wma_handle, |
| tpDelStaSelfParams pdel_sta_self_req_param, |
| u_int8_t generateRsp) |
| { |
| VOS_STATUS status = VOS_STATUS_SUCCESS; |
| ol_txrx_peer_handle peer; |
| ol_txrx_pdev_handle pdev; |
| u_int8_t peer_id; |
| u_int8_t vdev_id = pdel_sta_self_req_param->sessionId; |
| struct wma_txrx_node *iface = &wma_handle->interfaces[vdev_id]; |
| struct wma_target_req *msg; |
| |
| if (((iface->type == WMI_VDEV_TYPE_AP) && |
| (iface->sub_type == WMI_UNIFIED_VDEV_SUBTYPE_P2P_DEVICE)) || |
| (iface->type == WMI_VDEV_TYPE_MONITOR)) { |
| |
| WMA_LOGA("P2P Device: removing self peer %pM", |
| pdel_sta_self_req_param->selfMacAddr); |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, |
| wma_handle->vos_context); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to get pdev",__func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| peer = ol_txrx_find_peer_by_addr(pdev, |
| pdel_sta_self_req_param->selfMacAddr, |
| &peer_id); |
| if (!peer) { |
| WMA_LOGE("%s Failed to find peer %pM", __func__, |
| pdel_sta_self_req_param->selfMacAddr); |
| } |
| wma_remove_peer(wma_handle, |
| pdel_sta_self_req_param->selfMacAddr, |
| vdev_id, peer, VOS_FALSE); |
| } |
| if (adf_os_atomic_read(&iface->bss_status) == WMA_BSS_STATUS_STARTED) { |
| WMA_LOGA("BSS is not yet stopped. Defering vdev(vdev id %x) deletion", |
| vdev_id); |
| iface->del_staself_req = pdel_sta_self_req_param; |
| return status; |
| } |
| |
| adf_os_spin_lock_bh(&wma_handle->vdev_detach_lock); |
| if(!iface->handle) { |
| WMA_LOGE("handle of vdev_id %d is NULL vdev is already freed", |
| vdev_id); |
| adf_os_spin_unlock_bh(&wma_handle->vdev_detach_lock); |
| vos_mem_free(pdel_sta_self_req_param); |
| pdel_sta_self_req_param = NULL; |
| return status; |
| } |
| |
| /* Unregister vdev from TL shim before vdev delete |
| * Will protect from invalid vdev access */ |
| WLANTL_UnRegisterVdev(wma_handle->vos_context, vdev_id); |
| |
| /* remove the interface from ath_dev */ |
| if (wma_unified_vdev_delete_send(wma_handle->wmi_handle, vdev_id)) { |
| WMA_LOGE("Unable to remove an interface for ath_dev."); |
| status = VOS_STATUS_E_FAILURE; |
| adf_os_spin_unlock_bh(&wma_handle->vdev_detach_lock); |
| goto out; |
| } |
| |
| |
| WMA_LOGD("vdev_id:%hu vdev_hdl:%pK", vdev_id, iface->handle); |
| if (!generateRsp) { |
| WMA_LOGE("Call txrx detach w/o callback for vdev %d", vdev_id); |
| ol_txrx_vdev_detach(iface->handle, NULL, NULL); |
| iface->handle = NULL; |
| wma_handle->interfaces[vdev_id].is_vdev_valid = false; |
| adf_os_spin_unlock_bh(&wma_handle->vdev_detach_lock); |
| goto out; |
| } |
| |
| iface->del_staself_req = pdel_sta_self_req_param; |
| msg = wma_fill_vdev_req(wma_handle, vdev_id, WDA_DEL_STA_SELF_REQ, |
| WMA_TARGET_REQ_TYPE_VDEV_DEL, iface, 2000); |
| if (!msg) { |
| WMA_LOGE("%s: Failed to fill vdev request for vdev_id %d", |
| __func__, vdev_id); |
| status = VOS_STATUS_E_NOMEM; |
| adf_os_spin_unlock_bh(&wma_handle->vdev_detach_lock); |
| goto out; |
| } |
| WMA_LOGD("Call txrx detach with callback for vdev %d", vdev_id); |
| ol_txrx_vdev_detach(iface->handle, NULL, NULL); |
| iface->handle = NULL; |
| wma_handle->interfaces[vdev_id].is_vdev_valid = false; |
| wma_vdev_detach_callback(iface); |
| adf_os_spin_unlock_bh(&wma_handle->vdev_detach_lock); |
| return status; |
| out: |
| if(iface->addBssStaContext) |
| adf_os_mem_free(iface->addBssStaContext); |
| #if defined WLAN_FEATURE_VOWIFI_11R |
| if (iface->staKeyParams) |
| adf_os_mem_free(iface->staKeyParams); |
| #endif |
| vos_mem_zero(iface, sizeof(*iface)); |
| pdel_sta_self_req_param->status = status; |
| if (generateRsp) |
| wma_send_msg(wma_handle, WDA_DEL_STA_SELF_RSP, (void *)pdel_sta_self_req_param, 0); |
| |
| return status; |
| } |
| |
| static int wmi_unified_peer_create_send(wmi_unified_t wmi, |
| const u_int8_t *peer_addr, u_int32_t peer_type, |
| u_int32_t vdev_id) |
| { |
| wmi_peer_create_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wmi, len); |
| if (!buf) { |
| WMA_LOGP("%s: wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| cmd = (wmi_peer_create_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_peer_create_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_peer_create_cmd_fixed_param)); |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(peer_addr, &cmd->peer_macaddr); |
| cmd->peer_type = peer_type; |
| cmd->vdev_id = vdev_id; |
| |
| if (wmi_unified_cmd_send(wmi, buf, len, WMI_PEER_CREATE_CMDID)) { |
| WMA_LOGP("%s: failed to send WMI_PEER_CREATE_CMDID", __func__); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| VOS_STATUS wma_create_peer(tp_wma_handle wma, ol_txrx_pdev_handle pdev, |
| ol_txrx_vdev_handle vdev, u8 peer_addr[6], |
| u_int32_t peer_type, u_int8_t vdev_id, |
| v_BOOL_t roam_synch_in_progress) |
| { |
| ol_txrx_peer_handle peer; |
| |
| if (++wma->interfaces[vdev_id].peer_count > wma->wlan_resource_config.num_peers) { |
| WMA_LOGP("%s, the peer count exceeds the limit %d", |
| __func__, wma->interfaces[vdev_id].peer_count - 1); |
| goto err; |
| } |
| peer = ol_txrx_peer_attach(pdev, vdev, peer_addr); |
| if (!peer) { |
| WMA_LOGE("%s : Unable to attach peer %pM", __func__, peer_addr); |
| goto err; |
| } |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| if (roam_synch_in_progress) { |
| |
| WMA_LOGD("%s: Created peer with peer_addr %pM vdev_id %d," |
| "peer_count - %d",__func__, peer_addr, vdev_id, |
| wma->interfaces[vdev_id].peer_count); |
| return VOS_STATUS_SUCCESS; |
| } |
| #endif |
| if (wmi_unified_peer_create_send(wma->wmi_handle, peer_addr, |
| peer_type, vdev_id) < 0) { |
| WMA_LOGP("%s : Unable to create peer in Target", __func__); |
| ol_txrx_peer_detach(peer); |
| goto err; |
| } |
| WMA_LOGE("%s: Created peer with peer_addr %pM vdev_id %d, peer_count - %d", |
| __func__, peer_addr, vdev_id, wma->interfaces[vdev_id].peer_count); |
| |
| #ifdef QCA_IBSS_SUPPORT |
| /* for each remote ibss peer, clear its keys */ |
| if (wma_is_vdev_in_ibss_mode(wma, vdev_id) |
| && !vos_mem_compare(peer_addr, vdev->mac_addr.raw, ETH_ALEN)) { |
| |
| tSetStaKeyParams key_info; |
| WMA_LOGD("%s: remote ibss peer %pM key clearing\n", __func__, |
| peer_addr); |
| vos_mem_set(&key_info, sizeof(key_info), 0); |
| key_info.smesessionId= vdev_id; |
| vos_mem_copy(key_info.peerMacAddr, peer_addr, ETH_ALEN); |
| key_info.sendRsp = FALSE; |
| |
| wma_set_stakey(wma, &key_info); |
| } |
| #endif |
| |
| return VOS_STATUS_SUCCESS; |
| err: |
| wma->interfaces[vdev_id].peer_count--; |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| static void wma_set_sta_keep_alive(tp_wma_handle wma, u_int8_t vdev_id, |
| v_U32_t method, v_U32_t timeperiod, |
| u_int8_t *hostv4addr, u_int8_t *destv4addr, |
| u_int8_t *destmac) |
| { |
| wmi_buf_t buf; |
| WMI_STA_KEEPALIVE_CMD_fixed_param *cmd; |
| WMI_STA_KEEPALVE_ARP_RESPONSE *arp_rsp; |
| u_int8_t *buf_ptr; |
| int len; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| |
| if (timeperiod > WNI_CFG_INFRA_STA_KEEP_ALIVE_PERIOD_STAMAX) { |
| WMA_LOGE("Invalid period %d Max limit %d", timeperiod, |
| WNI_CFG_INFRA_STA_KEEP_ALIVE_PERIOD_STAMAX); |
| return; |
| } |
| |
| len = sizeof(*cmd) + sizeof(*arp_rsp); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("wmi_buf_alloc failed"); |
| return; |
| } |
| |
| cmd = (WMI_STA_KEEPALIVE_CMD_fixed_param *) wmi_buf_data(buf); |
| buf_ptr = (u_int8_t *)cmd; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_STA_KEEPALIVE_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| WMI_STA_KEEPALIVE_CMD_fixed_param)); |
| cmd->interval = timeperiod; |
| cmd->enable = (timeperiod)? 1:0; |
| cmd->vdev_id = vdev_id; |
| WMA_LOGD("Keep Alive: vdev_id:%d interval:%u method:%d", vdev_id, |
| timeperiod, method); |
| arp_rsp = (WMI_STA_KEEPALVE_ARP_RESPONSE *)(buf_ptr + sizeof(*cmd)); |
| WMITLV_SET_HDR(&arp_rsp->tlv_header, |
| WMITLV_TAG_STRUC_WMI_STA_KEEPALVE_ARP_RESPONSE, |
| WMITLV_GET_STRUCT_TLVLEN(WMI_STA_KEEPALVE_ARP_RESPONSE)); |
| |
| if (method == SIR_KEEP_ALIVE_UNSOLICIT_ARP_RSP) { |
| if ((NULL == hostv4addr) || |
| (NULL == destv4addr) || |
| (NULL == destmac)) { |
| WMA_LOGE("%s: received null pointer, hostv4addr:%pK " |
| "destv4addr:%pK destmac:%pK ", __func__, |
| hostv4addr, destv4addr, destmac); |
| wmi_buf_free(buf); |
| return; |
| } |
| |
| cmd->method = WMI_STA_KEEPALIVE_METHOD_UNSOLICITED_ARP_RESPONSE; |
| vos_mem_copy(&arp_rsp->sender_prot_addr, hostv4addr, |
| SIR_IPV4_ADDR_LEN); |
| vos_mem_copy(&arp_rsp->target_prot_addr, destv4addr, |
| SIR_IPV4_ADDR_LEN); |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(destmac,&arp_rsp->dest_mac_addr); |
| } else { |
| cmd->method = WMI_STA_KEEPALIVE_METHOD_NULL_FRAME; |
| } |
| |
| if (wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_STA_KEEPALIVE_CMDID)) { |
| WMA_LOGE("Failed to set KeepAlive"); |
| wmi_buf_free(buf); |
| } |
| |
| WMA_LOGD("%s: Exit", __func__); |
| return; |
| } |
| |
| static inline void wma_get_link_probe_timeout(struct sAniSirGlobal *mac, |
| tANI_U32 sub_type, |
| tANI_U32 *max_inactive_time, |
| tANI_U32 *max_unresponsive_time) |
| { |
| tANI_U32 keep_alive; |
| tANI_U16 lm_id, ka_id; |
| |
| switch (sub_type) { |
| case WMI_UNIFIED_VDEV_SUBTYPE_P2P_GO: |
| lm_id = WNI_CFG_GO_LINK_MONITOR_TIMEOUT; |
| ka_id = WNI_CFG_GO_KEEP_ALIVE_TIMEOUT; |
| break; |
| default: |
| /*For softAp the subtype value will be zero*/ |
| lm_id = WNI_CFG_AP_LINK_MONITOR_TIMEOUT; |
| ka_id = WNI_CFG_AP_KEEP_ALIVE_TIMEOUT; |
| } |
| |
| if(wlan_cfgGetInt(mac, lm_id, max_inactive_time) != eSIR_SUCCESS) { |
| WMA_LOGE("Failed to read link monitor for subtype %d", sub_type); |
| *max_inactive_time = WMA_LINK_MONITOR_DEFAULT_TIME_SECS; |
| } |
| |
| if(wlan_cfgGetInt(mac, ka_id, &keep_alive) != eSIR_SUCCESS) { |
| WMA_LOGE("Failed to read keep alive for subtype %d", sub_type); |
| keep_alive = WMA_KEEP_ALIVE_DEFAULT_TIME_SECS; |
| } |
| *max_unresponsive_time = *max_inactive_time + keep_alive; |
| } |
| |
| /** |
| * wma_verify_rate_code() - verify if rate code is valid. |
| * @rate_code: rate code |
| * |
| * Return: verify result |
| */ |
| static bool wma_verify_rate_code(u_int32_t rate_code) |
| { |
| uint8_t preamble, nss, rate; |
| bool valid = true; |
| |
| preamble = (rate_code & 0xc0) >> 6; |
| nss = (rate_code & 0x30) >> 4; |
| rate = rate_code & 0xf; |
| |
| switch (preamble) { |
| case WMI_RATE_PREAMBLE_CCK: |
| if (nss != 0 || rate > 3) |
| valid = false; |
| break; |
| case WMI_RATE_PREAMBLE_OFDM: |
| if (nss != 0 || rate > 7) |
| valid = false; |
| break; |
| case WMI_RATE_PREAMBLE_HT: |
| if (nss > 1 || rate > 7) |
| valid = false; |
| break; |
| case WMI_RATE_PREAMBLE_VHT: |
| if (nss > 1 || rate > 9) |
| valid = false; |
| break; |
| default: |
| break; |
| } |
| return valid; |
| } |
| |
| #define TX_MGMT_RATE_2G_ENABLE_OFFSET 30 |
| #define TX_MGMT_RATE_5G_ENABLE_OFFSET 31 |
| #define TX_MGMT_RATE_2G_OFFSET 0 |
| #define TX_MGMT_RATE_5G_OFFSET 12 |
| |
| /** |
| * wma_set_mgmt_rate() - set vdev mgmt rate. |
| * @wma: wma handle |
| * @vdev_id: vdev id |
| * |
| * Return: None |
| */ |
| static void wma_set_vdev_mgmt_rate(tp_wma_handle wma, u_int8_t vdev_id) |
| { |
| uint32_t cfg_val; |
| int ret; |
| uint32_t per_band_mgmt_tx_rate = 0; |
| struct sAniSirGlobal *mac = |
| (struct sAniSirGlobal*)vos_get_context(VOS_MODULE_ID_PE, |
| wma->vos_context); |
| |
| if (NULL == mac) { |
| WMA_LOGE("%s: Failed to get mac", __func__); |
| return; |
| } |
| |
| if (wlan_cfgGetInt(mac, WNI_CFG_RATE_FOR_TX_MGMT, |
| &cfg_val) == eSIR_SUCCESS) { |
| if ((cfg_val == WNI_CFG_RATE_FOR_TX_MGMT_STADEF) || |
| !wma_verify_rate_code(cfg_val)) { |
| WMA_LOGE("invalid rate code, ignore."); |
| } else { |
| ret = wmi_unified_vdev_set_param_send( |
| wma->wmi_handle, |
| vdev_id, |
| WMI_VDEV_PARAM_MGMT_TX_RATE, |
| cfg_val); |
| if (ret) |
| WMA_LOGE("Failed to set " |
| "WMI_VDEV_PARAM_MGMT_TX_RATE"); |
| } |
| } else { |
| WMA_LOGE("Failed to get value of " |
| "WNI_CFG_RATE_FOR_TX_MGMT"); |
| } |
| |
| if (wlan_cfgGetInt(mac, WNI_CFG_RATE_FOR_TX_MGMT_2G, |
| &cfg_val) == eSIR_SUCCESS) { |
| if ((cfg_val == WNI_CFG_RATE_FOR_TX_MGMT_2G_STADEF) || |
| !wma_verify_rate_code(cfg_val)) { |
| per_band_mgmt_tx_rate &= |
| ~(1 << TX_MGMT_RATE_2G_ENABLE_OFFSET); |
| } else { |
| per_band_mgmt_tx_rate |= |
| (1 << TX_MGMT_RATE_2G_ENABLE_OFFSET); |
| per_band_mgmt_tx_rate |= |
| ((cfg_val & 0x7FF) << TX_MGMT_RATE_2G_OFFSET); |
| } |
| } else { |
| WMA_LOGE("Failed to get value of WNI_CFG_RATE_FOR_TX_MGMT_2G"); |
| } |
| |
| if (wlan_cfgGetInt(mac, WNI_CFG_RATE_FOR_TX_MGMT_5G, |
| &cfg_val) == eSIR_SUCCESS) { |
| if ((cfg_val == WNI_CFG_RATE_FOR_TX_MGMT_5G_STADEF) || |
| !wma_verify_rate_code(cfg_val)) { |
| per_band_mgmt_tx_rate &= |
| ~(1 << TX_MGMT_RATE_5G_ENABLE_OFFSET); |
| } else { |
| per_band_mgmt_tx_rate |= |
| (1 << TX_MGMT_RATE_5G_ENABLE_OFFSET); |
| per_band_mgmt_tx_rate |= |
| ((cfg_val & 0x7FF) << TX_MGMT_RATE_5G_OFFSET); |
| } |
| } else { |
| WMA_LOGE("Failed to get value of WNI_CFG_RATE_FOR_TX_MGMT_5G"); |
| } |
| |
| ret = wmi_unified_vdev_set_param_send( |
| wma->wmi_handle, |
| vdev_id, |
| WMI_VDEV_PARAM_PER_BAND_MGMT_TX_RATE, |
| per_band_mgmt_tx_rate); |
| if (ret) |
| WMA_LOGE("Failed to set WMI_VDEV_PARAM_PER_BAND_MGMT_TX_RATE"); |
| } |
| |
| static void wma_set_sap_keepalive(tp_wma_handle wma, u_int8_t vdev_id) |
| { |
| tANI_U32 min_inactive_time, max_inactive_time, max_unresponsive_time; |
| struct sAniSirGlobal *mac = |
| (struct sAniSirGlobal*)vos_get_context(VOS_MODULE_ID_PE, |
| wma->vos_context); |
| |
| if (NULL == mac) { |
| WMA_LOGE("%s: Failed to get mac", __func__); |
| return; |
| } |
| |
| wma_get_link_probe_timeout(mac, wma->interfaces[vdev_id].sub_type, |
| &max_inactive_time, &max_unresponsive_time); |
| |
| min_inactive_time = max_inactive_time / 2; |
| |
| if (wmi_unified_vdev_set_param_send(wma->wmi_handle, |
| vdev_id, |
| WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, |
| min_inactive_time)) |
| WMA_LOGE("Failed to Set AP MIN IDLE INACTIVE TIME"); |
| |
| if (wmi_unified_vdev_set_param_send(wma->wmi_handle, |
| vdev_id, |
| WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, |
| max_inactive_time)) |
| WMA_LOGE("Failed to Set AP MAX IDLE INACTIVE TIME"); |
| |
| if (wmi_unified_vdev_set_param_send(wma->wmi_handle, |
| vdev_id, |
| WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, |
| max_unresponsive_time)) |
| WMA_LOGE("Failed to Set MAX UNRESPONSIVE TIME"); |
| |
| WMA_LOGD("%s:vdev_id:%d min_inactive_time: %u max_inactive_time: %u" |
| " max_unresponsive_time: %u", __func__, vdev_id, |
| min_inactive_time, max_inactive_time, max_unresponsive_time); |
| } |
| |
| static VOS_STATUS wma_set_enable_disable_mcc_adaptive_scheduler(tANI_U32 mcc_adaptive_scheduler) |
| { |
| int ret = -1; |
| wmi_buf_t buf = 0; |
| wmi_resmgr_adaptive_ocs_enable_disable_cmd_fixed_param *cmd = NULL; |
| tp_wma_handle wma = NULL; |
| void *vos_context = NULL; |
| u_int16_t len = sizeof(wmi_resmgr_adaptive_ocs_enable_disable_cmd_fixed_param); |
| |
| vos_context = vos_get_global_context(VOS_MODULE_ID_WDA, NULL); |
| wma = vos_get_context(VOS_MODULE_ID_WDA, vos_context); |
| |
| if (NULL == wma) { |
| WMA_LOGE("%s : Failed to get wma", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| cmd = (wmi_resmgr_adaptive_ocs_enable_disable_cmd_fixed_param *) wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_resmgr_adaptive_ocs_enable_disable_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_resmgr_adaptive_ocs_enable_disable_cmd_fixed_param)); |
| cmd->enable = mcc_adaptive_scheduler; |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_RESMGR_ADAPTIVE_OCS_ENABLE_DISABLE_CMDID); |
| if (ret) { |
| WMA_LOGP("%s: Failed to send enable/disable MCC" |
| " adaptive scheduler command", __func__); |
| wmi_buf_free(buf); |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * Currently used to set time latency for an MCC vdev/adapter using operating |
| * channel of it and channel number. The info is provided run time using |
| * iwpriv command: iwpriv <wlan0 | p2p0> setMccLatency <latency in ms>. |
| */ |
| static VOS_STATUS wma_set_mcc_channel_time_latency |
| ( |
| tp_wma_handle wma, |
| tANI_U32 mcc_channel, |
| tANI_U32 mcc_channel_time_latency |
| ) |
| { |
| int ret = -1; |
| wmi_buf_t buf = 0; |
| wmi_resmgr_set_chan_latency_cmd_fixed_param *cmdTL = NULL; |
| u_int16_t len = 0; |
| u_int8_t *buf_ptr = NULL; |
| tANI_U32 cfg_val = 0; |
| wmi_resmgr_chan_latency chan_latency; |
| struct sAniSirGlobal *pMac = NULL; |
| /* Note: we only support MCC time latency for a single channel */ |
| u_int32_t num_channels = 1; |
| u_int32_t channel1 = mcc_channel; |
| u_int32_t chan1_freq = vos_chan_to_freq( channel1 ); |
| u_int32_t latency_chan1 = mcc_channel_time_latency; |
| |
| if (!wma) { |
| WMA_LOGE("%s:NULL wma ptr. Exiting", __func__); |
| VOS_ASSERT(0); |
| return VOS_STATUS_E_FAILURE; |
| } |
| pMac = |
| (struct sAniSirGlobal*)vos_get_context(VOS_MODULE_ID_PE, |
| wma->vos_context); |
| if (!pMac) { |
| WMA_LOGE("%s:NULL pMac ptr. Exiting", __func__); |
| VOS_ASSERT(0); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| /* First step is to confirm if MCC is active */ |
| if (!limIsInMCC(pMac)) { |
| WMA_LOGE("%s: MCC is not active. Exiting", __func__); |
| VOS_ASSERT(0); |
| return VOS_STATUS_E_FAILURE; |
| } |
| /* Confirm MCC adaptive scheduler feature is disabled */ |
| if (wlan_cfgGetInt(pMac, WNI_CFG_ENABLE_MCC_ADAPTIVE_SCHED, |
| &cfg_val) == eSIR_SUCCESS) { |
| if (cfg_val == WNI_CFG_ENABLE_MCC_ADAPTIVE_SCHED_STAMAX) { |
| WMA_LOGD("%s: Can't set channel latency while MCC " |
| "ADAPTIVE SCHED is enabled. Exit", __func__); |
| return VOS_STATUS_SUCCESS; |
| } |
| } else { |
| WMA_LOGE("%s: Failed to get value for MCC_ADAPTIVE_SCHED, " |
| "Exit w/o setting latency", __func__); |
| VOS_ASSERT(0); |
| return VOS_STATUS_E_FAILURE; |
| } |
| /* If 0ms latency is provided, then FW will set to a default. |
| * Otherwise, latency must be at least 30ms. |
| */ |
| if ((latency_chan1 > 0) && |
| (latency_chan1 < WMI_MCC_MIN_NON_ZERO_CHANNEL_LATENCY)) { |
| WMA_LOGE("%s: Invalid time latency for Channel #1 = %dms " |
| "Minimum is 30ms (or 0 to use default value by " |
| "firmware)", __func__, latency_chan1); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| /* Set WMI CMD for channel time latency here */ |
| len = sizeof(wmi_resmgr_set_chan_latency_cmd_fixed_param) + |
| WMI_TLV_HDR_SIZE + /*Place holder for chan_time_latency array*/ |
| num_channels * sizeof(wmi_resmgr_chan_latency); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmdTL = (wmi_resmgr_set_chan_latency_cmd_fixed_param *) |
| wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmdTL->tlv_header, |
| WMITLV_TAG_STRUC_wmi_resmgr_set_chan_latency_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_resmgr_set_chan_latency_cmd_fixed_param)); |
| cmdTL->num_chans = num_channels; |
| /* Update channel time latency information for home channel(s) */ |
| buf_ptr += sizeof(*cmdTL); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, |
| num_channels * sizeof(wmi_resmgr_chan_latency)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| chan_latency.chan_mhz = chan1_freq; |
| chan_latency.latency = latency_chan1; |
| vos_mem_copy(buf_ptr, &chan_latency, sizeof(chan_latency)); |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_RESMGR_SET_CHAN_LATENCY_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send MCC Channel Time Latency command", |
| __func__); |
| wmi_buf_free(buf); |
| VOS_ASSERT(0); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * Currently used to set time quota for 2 MCC vdevs/adapters using (operating |
| * channel, quota) for each mode . The info is provided run time using |
| * iwpriv command: iwpriv <wlan0 | p2p0> setMccQuota <quota in ms>. |
| * Note: the quota provided in command is for the same mode in cmd. HDD |
| * checks if MCC mode is active, gets the second mode and its operating chan. |
| * Quota for the 2nd role is calculated as 100 - quota of first mode. |
| */ |
| static VOS_STATUS wma_set_mcc_channel_time_quota |
| ( |
| tp_wma_handle wma, |
| tANI_U32 adapter_1_chan_number, |
| tANI_U32 adapter_1_quota, |
| tANI_U32 adapter_2_chan_number |
| ) |
| { |
| int ret = -1; |
| wmi_buf_t buf = 0; |
| u_int16_t len = 0; |
| u_int8_t *buf_ptr = NULL; |
| tANI_U32 cfg_val = 0; |
| struct sAniSirGlobal *pMac = NULL; |
| wmi_resmgr_set_chan_time_quota_cmd_fixed_param *cmdTQ = NULL; |
| wmi_resmgr_chan_time_quota chan_quota; |
| u_int32_t channel1 = adapter_1_chan_number; |
| u_int32_t channel2 = adapter_2_chan_number; |
| u_int32_t quota_chan1 = adapter_1_quota; |
| /* Knowing quota of 1st chan., derive quota for 2nd chan. */ |
| u_int32_t quota_chan2 = 100 - quota_chan1; |
| /* Note: setting time quota for MCC requires info for 2 channels */ |
| u_int32_t num_channels = 2; |
| u_int32_t chan1_freq = vos_chan_to_freq(adapter_1_chan_number); |
| u_int32_t chan2_freq = vos_chan_to_freq(adapter_2_chan_number); |
| |
| WMA_LOGD("%s: Channel1:%d, freq1:%dMHz, Quota1:%dms, " |
| "Channel2:%d, freq2:%dMHz, Quota2:%dms", __func__, |
| channel1, chan1_freq, quota_chan1, channel2, chan2_freq, |
| quota_chan2); |
| |
| if (!wma) { |
| WMA_LOGE("%s:NULL wma ptr. Exiting", __func__); |
| VOS_ASSERT(0); |
| return VOS_STATUS_E_FAILURE; |
| } |
| pMac = |
| (struct sAniSirGlobal*)vos_get_context(VOS_MODULE_ID_PE, |
| wma->vos_context); |
| if (!pMac) { |
| WMA_LOGE("%s:NULL pMac ptr. Exiting", __func__); |
| VOS_ASSERT(0); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| /* First step is to confirm if MCC is active */ |
| if (!limIsInMCC(pMac)) { |
| WMA_LOGD("%s: MCC is not active. Exiting", __func__); |
| VOS_ASSERT(0); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| /* Confirm MCC adaptive scheduler feature is disabled */ |
| if (wlan_cfgGetInt(pMac, WNI_CFG_ENABLE_MCC_ADAPTIVE_SCHED, |
| &cfg_val) == eSIR_SUCCESS) { |
| if (cfg_val == WNI_CFG_ENABLE_MCC_ADAPTIVE_SCHED_STAMAX) { |
| WMA_LOGD("%s: Can't set channel quota while " |
| "MCC_ADAPTIVE_SCHED is enabled. Exit", |
| __func__); |
| return VOS_STATUS_SUCCESS; |
| } |
| } else { |
| WMA_LOGE("%s: Failed to retrieve " |
| "WNI_CFG_ENABLE_MCC_ADAPTIVE_SCHED. Exit", |
| __func__); |
| VOS_ASSERT(0); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * Perform sanity check on time quota values provided. |
| */ |
| if (quota_chan1 < WMI_MCC_MIN_CHANNEL_QUOTA || |
| quota_chan1 > WMI_MCC_MAX_CHANNEL_QUOTA) { |
| WMA_LOGE("%s: Invalid time quota for Channel #1=%dms. Minimum " |
| "is 20ms & maximum is 80ms", __func__, quota_chan1); |
| return VOS_STATUS_E_INVAL; |
| } |
| /* Set WMI CMD for channel time quota here */ |
| len = sizeof(wmi_resmgr_set_chan_time_quota_cmd_fixed_param) + |
| WMI_TLV_HDR_SIZE + /* Place holder for chan_time_quota array */ |
| num_channels * sizeof(wmi_resmgr_chan_time_quota); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| VOS_ASSERT(0); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmdTQ = (wmi_resmgr_set_chan_time_quota_cmd_fixed_param *) |
| wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmdTQ->tlv_header, |
| WMITLV_TAG_STRUC_wmi_resmgr_set_chan_time_quota_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_resmgr_set_chan_time_quota_cmd_fixed_param)); |
| cmdTQ->num_chans = num_channels; |
| |
| /* Update channel time quota information for home channel(s) */ |
| buf_ptr += sizeof(*cmdTQ); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, |
| num_channels * sizeof(wmi_resmgr_chan_time_quota)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| chan_quota.chan_mhz = chan1_freq; |
| chan_quota.channel_time_quota = quota_chan1; |
| vos_mem_copy(buf_ptr, &chan_quota, sizeof(chan_quota)); |
| /* Construct channel and quota record for the 2nd MCC mode. */ |
| buf_ptr += sizeof(chan_quota); |
| chan_quota.chan_mhz = chan2_freq; |
| chan_quota.channel_time_quota = quota_chan2; |
| vos_mem_copy(buf_ptr, &chan_quota, sizeof(chan_quota)); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_RESMGR_SET_CHAN_TIME_QUOTA_CMDID); |
| if (ret) { |
| WMA_LOGE("Failed to send MCC Channel Time Quota command"); |
| wmi_buf_free(buf); |
| VOS_ASSERT(0); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* function : wma_vdev_attach |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| static ol_txrx_vdev_handle wma_vdev_attach(tp_wma_handle wma_handle, |
| tpAddStaSelfParams self_sta_req, |
| u_int8_t generateRsp) |
| { |
| ol_txrx_vdev_handle txrx_vdev_handle = NULL; |
| ol_txrx_pdev_handle txrx_pdev = vos_get_context(VOS_MODULE_ID_TXRX, |
| wma_handle->vos_context); |
| enum wlan_op_mode txrx_vdev_type; |
| VOS_STATUS status = VOS_STATUS_SUCCESS; |
| struct sAniSirGlobal *mac = |
| (struct sAniSirGlobal*)vos_get_context(VOS_MODULE_ID_PE, |
| wma_handle->vos_context); |
| tANI_U32 cfg_val; |
| tANI_U16 val16; |
| int ret; |
| tSirMacHTCapabilityInfo *phtCapInfo; |
| u_int8_t vdev_id; |
| struct sir_set_tx_rx_aggregation_size tx_rx_aggregation_size; |
| |
| if (NULL == mac) { |
| WMA_LOGE("%s: Failed to get mac",__func__); |
| goto end; |
| } |
| |
| if (VOS_MONITOR_MODE == vos_get_conparam()) |
| self_sta_req->type = WMI_VDEV_TYPE_MONITOR; |
| |
| /* Create a vdev in target */ |
| if (wma_unified_vdev_create_send(wma_handle->wmi_handle, |
| self_sta_req->sessionId, |
| self_sta_req->type, |
| self_sta_req->subType, |
| self_sta_req->selfMacAddr, |
| self_sta_req->nss_2g, |
| self_sta_req->nss_5g)) |
| { |
| WMA_LOGP("%s: Unable to add an interface for ath_dev", __func__); |
| status = VOS_STATUS_E_RESOURCES; |
| goto end; |
| } |
| vdev_id = self_sta_req->sessionId; |
| |
| txrx_vdev_type = wma_get_txrx_vdev_type(self_sta_req->type); |
| |
| if (wlan_op_mode_unknown == txrx_vdev_type) { |
| WMA_LOGE("Failed to get txrx vdev type"); |
| wma_unified_vdev_delete_send(wma_handle->wmi_handle, |
| self_sta_req->sessionId); |
| goto end; |
| } |
| |
| txrx_vdev_handle = ol_txrx_vdev_attach(txrx_pdev, |
| self_sta_req->selfMacAddr, |
| self_sta_req->sessionId, |
| txrx_vdev_type); |
| wma_handle->interfaces[self_sta_req->sessionId].pause_bitmap = 0; |
| |
| WMA_LOGD("vdev_id %hu, txrx_vdev_handle = %pK", self_sta_req->sessionId, |
| txrx_vdev_handle); |
| |
| if (NULL == txrx_vdev_handle) { |
| WMA_LOGP("%s: ol_txrx_vdev_attach failed", __func__); |
| status = VOS_STATUS_E_FAILURE; |
| wma_unified_vdev_delete_send(wma_handle->wmi_handle, |
| self_sta_req->sessionId); |
| goto end; |
| } |
| |
| wma_handle->interfaces[self_sta_req->sessionId].vdev_active = TRUE; |
| wma_handle->interfaces[self_sta_req->sessionId].handle = txrx_vdev_handle; |
| |
| wma_handle->interfaces[self_sta_req->sessionId].ptrn_match_enable = |
| wma_handle->ptrn_match_enable_all_vdev ? TRUE : FALSE; |
| |
| if (wlan_cfgGetInt(mac, WNI_CFG_WOWLAN_DEAUTH_ENABLE, &cfg_val) |
| != eSIR_SUCCESS) |
| wma_handle->wow.deauth_enable = TRUE; |
| else |
| wma_handle->wow.deauth_enable = cfg_val ? TRUE : FALSE; |
| |
| if (wlan_cfgGetInt(mac, WNI_CFG_WOWLAN_DISASSOC_ENABLE, &cfg_val) |
| != eSIR_SUCCESS) |
| wma_handle->wow.disassoc_enable = TRUE; |
| else |
| wma_handle->wow.disassoc_enable = cfg_val ? TRUE : FALSE; |
| |
| if (wlan_cfgGetInt(mac, WNI_CFG_WOWLAN_MAX_MISSED_BEACON, &cfg_val) |
| != eSIR_SUCCESS) |
| wma_handle->wow.bmiss_enable = TRUE; |
| else |
| wma_handle->wow.bmiss_enable = cfg_val ? TRUE : FALSE; |
| |
| vos_mem_copy(wma_handle->interfaces[self_sta_req->sessionId].addr, |
| self_sta_req->selfMacAddr, |
| sizeof(wma_handle->interfaces[self_sta_req->sessionId].addr)); |
| |
| tx_rx_aggregation_size.tx_aggregation_size = |
| self_sta_req->tx_aggregation_size; |
| tx_rx_aggregation_size.rx_aggregation_size = |
| self_sta_req->rx_aggregation_size; |
| tx_rx_aggregation_size.vdev_id = self_sta_req->sessionId; |
| |
| status = wma_set_tx_rx_aggregation_size(&tx_rx_aggregation_size); |
| if (status != VOS_STATUS_SUCCESS) |
| WMA_LOGE("failed to set aggregation sizes(err=%d)", status); |
| |
| switch (self_sta_req->type) { |
| case WMI_VDEV_TYPE_STA: |
| if(wlan_cfgGetInt(mac, WNI_CFG_INFRA_STA_KEEP_ALIVE_PERIOD, |
| &cfg_val ) != eSIR_SUCCESS) { |
| WMA_LOGE("Failed to get value for " |
| "WNI_CFG_INFRA_STA_KEEP_ALIVE_PERIOD"); |
| cfg_val = DEFAULT_INFRA_STA_KEEP_ALIVE_PERIOD; |
| } |
| |
| wma_set_sta_keep_alive(wma_handle, |
| self_sta_req->sessionId, |
| SIR_KEEP_ALIVE_NULL_PKT, |
| cfg_val, |
| NULL, |
| NULL, |
| NULL); |
| break; |
| } |
| |
| wma_handle->interfaces[self_sta_req->sessionId].type = |
| self_sta_req->type; |
| wma_handle->interfaces[self_sta_req->sessionId].sub_type = |
| self_sta_req->subType; |
| wma_handle->interfaces[self_sta_req->sessionId].nss_2g = |
| self_sta_req->nss_2g; |
| wma_handle->interfaces[self_sta_req->sessionId].nss_5g = |
| self_sta_req->nss_5g; |
| adf_os_atomic_init(&wma_handle->interfaces |
| [self_sta_req->sessionId].bss_status); |
| |
| if (((self_sta_req->type == WMI_VDEV_TYPE_AP) && |
| (self_sta_req->subType == |
| WMI_UNIFIED_VDEV_SUBTYPE_P2P_DEVICE)) || |
| (self_sta_req->type == WMI_VDEV_TYPE_OCB) || |
| (self_sta_req->type == WMI_VDEV_TYPE_MONITOR) || |
| (self_sta_req->type == WMI_VDEV_TYPE_NDI)) { |
| WMA_LOGA("Creating self peer %pM, vdev_id %hu", |
| self_sta_req->selfMacAddr, |
| self_sta_req->sessionId); |
| status = wma_create_peer(wma_handle, txrx_pdev, |
| txrx_vdev_handle, self_sta_req->selfMacAddr, |
| WMI_PEER_TYPE_DEFAULT,self_sta_req->sessionId, |
| VOS_FALSE); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s: Failed to create peer", __func__); |
| status = VOS_STATUS_E_FAILURE; |
| wma_unified_vdev_delete_send(wma_handle->wmi_handle, |
| self_sta_req->sessionId); |
| } |
| } |
| wma_handle->interfaces[vdev_id].is_vdev_valid = true; |
| |
| ret = wmi_unified_vdev_set_param_send(wma_handle->wmi_handle, |
| self_sta_req->sessionId, |
| WMI_VDEV_PARAM_DISCONNECT_TH, |
| self_sta_req->pkt_err_disconn_th); |
| if (ret) |
| WMA_LOGE("Failed to set WMI_VDEV_PARAM_DISCONNECT_TH"); |
| |
| WMA_LOGD("%s %d vdev_id %d mcc_rts_cts_prot_enable %d\n", |
| __func__, __LINE__, self_sta_req->sessionId, |
| mac->roam.configParam.mcc_rts_cts_prot_enable); |
| |
| ret = wmi_unified_vdev_set_param_send(wma_handle->wmi_handle, |
| self_sta_req->sessionId, |
| WMI_VDEV_PARAM_MCC_RTSCTS_PROTECTION_ENABLE, |
| mac->roam.configParam.mcc_rts_cts_prot_enable); |
| if (ret) |
| WMA_LOGE("Failed to set WMI_VDEV_PARAM_MCC_RTSCTS_PROTECTION_ENABLE"); |
| |
| WMA_LOGD("%s %d vdev_id %d mcc_bcast_prob_resp_enable %d\n", |
| __func__, __LINE__, self_sta_req->sessionId, |
| mac->roam.configParam.mcc_bcast_prob_resp_enable); |
| |
| ret = wmi_unified_vdev_set_param_send(wma_handle->wmi_handle, |
| self_sta_req->sessionId, |
| WMI_VDEV_PARAM_MCC_BROADCAST_PROBE_ENABLE, |
| mac->roam.configParam.mcc_bcast_prob_resp_enable); |
| if (ret) |
| WMA_LOGE("Failed to set WMI_VDEV_PARAM_MCC_BROADCAST_PROBE_ENABLE"); |
| |
| if (wlan_cfgGetInt(mac, WNI_CFG_RTS_THRESHOLD, |
| &cfg_val) == eSIR_SUCCESS) { |
| ret = wmi_unified_vdev_set_param_send(wma_handle->wmi_handle, |
| self_sta_req->sessionId, |
| WMI_VDEV_PARAM_RTS_THRESHOLD, |
| cfg_val); |
| if (ret) |
| WMA_LOGE("Failed to set WMI_VDEV_PARAM_RTS_THRESHOLD"); |
| } else { |
| WMA_LOGE("Failed to get value for WNI_CFG_RTS_THRESHOLD, leaving unchanged"); |
| } |
| |
| if (wlan_cfgGetInt(mac, WNI_CFG_FRAGMENTATION_THRESHOLD, |
| &cfg_val) == eSIR_SUCCESS) { |
| ret = wmi_unified_vdev_set_param_send(wma_handle->wmi_handle, |
| self_sta_req->sessionId, |
| WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, |
| cfg_val); |
| if (ret) |
| WMA_LOGE("Failed to set WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD"); |
| } else { |
| WMA_LOGE("Failed to get value for WNI_CFG_FRAGMENTATION_THRESHOLD, leaving unchanged"); |
| } |
| |
| if (wlan_cfgGetInt(mac, WNI_CFG_HT_CAP_INFO, |
| &cfg_val) == eSIR_SUCCESS) { |
| val16 = (tANI_U16)cfg_val; |
| phtCapInfo = (tSirMacHTCapabilityInfo *)&cfg_val; |
| ret = wmi_unified_vdev_set_param_send(wma_handle->wmi_handle, |
| self_sta_req->sessionId, |
| WMI_VDEV_PARAM_TX_STBC, |
| phtCapInfo->txSTBC); |
| if (ret) |
| WMA_LOGE("Failed to set WMI_VDEV_PARAM_TX_STBC"); |
| } else { |
| WMA_LOGE("Failed to get value of HT_CAP, TX STBC unchanged"); |
| } |
| |
| wma_set_vdev_mgmt_rate(wma_handle, self_sta_req->sessionId); |
| /* Initialize roaming offload state */ |
| if ((self_sta_req->type == WMI_VDEV_TYPE_STA) && |
| (self_sta_req->subType == 0)) { |
| wma_handle->roam_offload_enabled = TRUE; |
| wmi_unified_vdev_set_param_send(wma_handle->wmi_handle, |
| self_sta_req->sessionId, |
| WMI_VDEV_PARAM_ROAM_FW_OFFLOAD, |
| (WMI_ROAM_FW_OFFLOAD_ENABLE_FLAG | |
| WMI_ROAM_BMISS_FINAL_SCAN_ENABLE_FLAG)); |
| } |
| |
| /* Initialize BMISS parameters */ |
| if ((self_sta_req->type == WMI_VDEV_TYPE_STA) && |
| (self_sta_req->subType == 0)) { |
| wma_roam_scan_bmiss_cnt(wma_handle, |
| mac->roam.configParam.neighborRoamConfig.nRoamBmissFirstBcnt, |
| mac->roam.configParam.neighborRoamConfig.nRoamBmissFinalBcnt, |
| self_sta_req->sessionId); |
| } |
| |
| if (wlan_cfgGetInt(mac, WNI_CFG_ENABLE_MCC_ADAPTIVE_SCHED, |
| &cfg_val) == eSIR_SUCCESS) { |
| WMA_LOGD("%s: setting ini value for WNI_CFG_ENABLE_MCC_ADAPTIVE_SCHED: %d", |
| __func__, cfg_val); |
| ret = wma_set_enable_disable_mcc_adaptive_scheduler(cfg_val); |
| if (ret != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to set WNI_CFG_ENABLE_MCC_ADAPTIVE_SCHED"); |
| } |
| } else { |
| WMA_LOGE("Failed to get value for WNI_CFG_ENABLE_MCC_ADAPTIVE_SCHED, leaving unchanged"); |
| } |
| |
| end: |
| self_sta_req->status = status; |
| |
| #ifdef QCA_IBSS_SUPPORT |
| if (generateRsp) |
| #endif |
| wma_send_msg(wma_handle, WDA_ADD_STA_SELF_RSP, (void *)self_sta_req, 0); |
| |
| return txrx_vdev_handle; |
| } |
| |
| static VOS_STATUS wma_wni_cfg_dnld(tp_wma_handle wma_handle) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| v_VOID_t *mac = vos_get_context(VOS_MODULE_ID_PE, |
| wma_handle->vos_context); |
| |
| WMA_LOGD("%s: Enter", __func__); |
| |
| if (NULL == mac) { |
| WMA_LOGP("%s: Invalid context", __func__); |
| VOS_ASSERT(0); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| processCfgDownloadReq(mac); |
| |
| WMA_LOGD("%s: Exit", __func__); |
| return vos_status; |
| } |
| |
| /* function : wma_set_scan_info |
| * Description : function to save current ongoing scan info |
| * Args : wma handle, scan id, scan requestor id, vdev id |
| * Returns : None |
| */ |
| static inline void wma_set_scan_info(tp_wma_handle wma_handle, |
| u_int32_t scan_id, |
| u_int32_t requestor, |
| u_int32_t vdev_id, |
| tSirP2pScanType p2p_scan_type) |
| { |
| wma_handle->interfaces[vdev_id].scan_info.scan_id = scan_id; |
| wma_handle->interfaces[vdev_id].scan_info.scan_requestor_id = |
| requestor; |
| wma_handle->interfaces[vdev_id].scan_info.p2p_scan_type = p2p_scan_type; |
| } |
| |
| /* function : wma_reset_scan_info |
| * Description : function to reset the current ongoing scan info |
| * Args : wma handle, vdev_id |
| * Returns : None |
| */ |
| static inline void wma_reset_scan_info(tp_wma_handle wma_handle, |
| u_int8_t vdev_id) |
| { |
| vos_mem_zero((void *) &(wma_handle->interfaces[vdev_id].scan_info), |
| sizeof(struct scan_param)); |
| } |
| |
| bool wma_check_scan_in_progress(WMA_HANDLE handle) |
| { |
| tp_wma_handle wma_handle = handle; |
| int i; |
| |
| for (i = 0; i < wma_handle->max_bssid; i++){ |
| if (wma_handle->interfaces[i].scan_info.scan_id){ |
| |
| WMA_LOGE("%s: scan in progress on interface[%d],scanid = %d", |
| __func__, i, wma_handle->interfaces[i].scan_info.scan_id ); |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| v_BOOL_t wma_is_SAP_active(tp_wma_handle wma_handle) |
| { |
| int i; |
| |
| for (i = 0; i < wma_handle->max_bssid; i++) { |
| if (!wma_handle->interfaces[i].vdev_up) |
| continue; |
| if (wma_handle->interfaces[i].type == WMI_VDEV_TYPE_AP && |
| wma_handle->interfaces[i].sub_type == 0) |
| return TRUE; |
| } |
| return FALSE; |
| } |
| |
| v_BOOL_t wma_is_P2P_GO_active(tp_wma_handle wma_handle) |
| { |
| int i; |
| |
| for (i = 0; i < wma_handle->max_bssid; i++) { |
| if (!wma_handle->interfaces[i].vdev_up) |
| continue; |
| if (wma_handle->interfaces[i].type == WMI_VDEV_TYPE_AP && |
| wma_handle->interfaces[i].sub_type == WMI_UNIFIED_VDEV_SUBTYPE_P2P_GO) |
| return TRUE; |
| } |
| return FALSE; |
| } |
| |
| v_BOOL_t wma_is_P2P_CLI_active(tp_wma_handle wma_handle) |
| { |
| int i; |
| |
| for (i = 0; i < wma_handle->max_bssid; i++) { |
| if (!wma_handle->interfaces[i].vdev_up) |
| continue; |
| if (wma_handle->interfaces[i].type == WMI_VDEV_TYPE_STA && |
| wma_handle->interfaces[i].sub_type == WMI_UNIFIED_VDEV_SUBTYPE_P2P_CLIENT) |
| return TRUE; |
| } |
| return FALSE; |
| } |
| |
| v_BOOL_t wma_is_STA_active(tp_wma_handle wma_handle) |
| { |
| int i; |
| |
| for (i = 0; i < wma_handle->max_bssid; i++) { |
| if (!wma_handle->interfaces[i].vdev_up) |
| continue; |
| if (wma_handle->interfaces[i].type == WMI_VDEV_TYPE_STA && |
| wma_handle->interfaces[i].sub_type == 0) |
| return TRUE; |
| if (wma_handle->interfaces[i].type == WMI_VDEV_TYPE_IBSS) |
| return TRUE; |
| } |
| return FALSE; |
| } |
| |
| /** |
| * wma_is_mcc_24G() - Function to check MCC in 2.4GHz band |
| * @handle: WMA handle |
| * |
| * This function is used to check MCC in 2.4GHz band |
| * |
| * Return: True if WMA is in MCC in 2.4GHz band |
| * |
| */ |
| static bool wma_is_mcc_24G(WMA_HANDLE handle) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| int32_t prev_chan = 0; |
| int32_t i; |
| |
| if (NULL == wma_handle) { |
| WMA_LOGE("%s: wma_handle is NULL", __func__); |
| return false; |
| } |
| for (i = 0; i < wma_handle->max_bssid; i++) { |
| if (wma_handle->interfaces[i].handle && |
| wma_handle->interfaces[i].vdev_up) { |
| if ((prev_chan != 0 && |
| prev_chan != wma_handle->interfaces[i].mhz) && |
| (wma_handle->interfaces[i].mhz <= |
| VOS_CHAN_14_FREQ)) |
| return true; |
| else |
| prev_chan = wma_handle->interfaces[i].mhz; |
| } |
| } |
| return false; |
| } |
| |
| /** |
| * wma_is_mcc_starting() - Function to check MCC will start or already started |
| * @handle: WMA handle |
| * |
| * This function is used to check MCC will start or already started |
| * |
| * Return: True if WMA is in MCC will or already started |
| * |
| */ |
| static bool wma_is_mcc_starting(WMA_HANDLE handle, A_UINT32 starting_mhz) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| int32_t prev_chan = starting_mhz; |
| int32_t i; |
| |
| if (NULL == wma_handle) { |
| WMA_LOGE("%s: wma_handle is NULL", __func__); |
| return false; |
| } |
| for (i = 0; i < wma_handle->max_bssid; i++) { |
| if (wma_handle->interfaces[i].handle && |
| wma_handle->interfaces[i].vdev_up) { |
| if ((prev_chan != 0 && |
| prev_chan != wma_handle->interfaces[i].mhz)) |
| return true; |
| else |
| prev_chan = wma_handle->interfaces[i].mhz; |
| } |
| } |
| return false; |
| } |
| |
| /* function : wma_get_buf_start_scan_cmd |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_get_buf_start_scan_cmd(tp_wma_handle wma_handle, |
| tSirScanOffloadReq *scan_req, |
| wmi_buf_t *buf, |
| int *buf_len) |
| { |
| wmi_start_scan_cmd_fixed_param *cmd; |
| wmi_chan_list *chan_list = NULL; |
| wmi_mac_addr *bssid; |
| wmi_ssid *ssid = NULL; |
| u_int32_t *tmp_ptr, ie_len_with_pad; |
| VOS_STATUS vos_status = VOS_STATUS_E_FAILURE; |
| u_int8_t *buf_ptr; |
| u_int32_t dwell_time; |
| u_int8_t SSID_num; |
| int i; |
| int len = sizeof(*cmd); |
| wmi_vendor_oui *voui = NULL; |
| struct vendor_oui *pvoui = NULL; |
| tpAniSirGlobal pMac = (tpAniSirGlobal )vos_get_context(VOS_MODULE_ID_PE, |
| wma_handle->vos_context); |
| |
| if (!pMac) { |
| WMA_LOGP("%s: pMac is NULL!", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| len += WMI_TLV_HDR_SIZE; /* Length TLV placeholder for array of uint32 */ |
| /* calculate the length of buffer required */ |
| if (scan_req->channelList.numChannels) |
| len += scan_req->channelList.numChannels * sizeof(u_int32_t); |
| |
| len += WMI_TLV_HDR_SIZE; /* Length TLV placeholder for array of wmi_ssid structures */ |
| if (scan_req->numSsid) |
| len += scan_req->numSsid * sizeof(wmi_ssid); |
| |
| len += WMI_TLV_HDR_SIZE; /* Length TLV placeholder for array of wmi_mac_addr structures */ |
| len += sizeof(wmi_mac_addr); |
| |
| len += WMI_TLV_HDR_SIZE; /* Length TLV placeholder for array of bytes */ |
| if (scan_req->uIEFieldLen) |
| len += roundup(scan_req->uIEFieldLen, sizeof(u_int32_t)); |
| |
| len += WMI_TLV_HDR_SIZE; /* Length of TLV for array of wmi_vendor_oui */ |
| if (scan_req->num_vendor_oui) |
| len += scan_req->num_vendor_oui * sizeof(wmi_vendor_oui); |
| |
| /* Allocate the memory */ |
| *buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!*buf) { |
| WMA_LOGP("%s: failed to allocate memory for start scan cmd", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(*buf); |
| cmd = (wmi_start_scan_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_start_scan_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_start_scan_cmd_fixed_param)); |
| |
| if (wma_handle->scan_id >= WMA_MAX_SCAN_ID) |
| wma_handle->scan_id = 0; |
| |
| cmd->vdev_id = scan_req->sessionId; |
| /* host cycles through the lower 12 bits of |
| wma_handle->scan_id to generate ids */ |
| cmd->scan_id = WMA_HOST_SCAN_REQID_PREFIX | ++wma_handle->scan_id; |
| cmd->scan_priority = WMI_SCAN_PRIORITY_LOW; |
| cmd->scan_req_id = WMA_HOST_SCAN_REQUESTOR_ID_PREFIX | |
| WMA_DEFAULT_SCAN_REQUESTER_ID; |
| |
| /* Set the scan events which the driver is intereseted to receive */ |
| /* TODO: handle all the other flags also */ |
| cmd->notify_scan_events = WMI_SCAN_EVENT_STARTED | |
| WMI_SCAN_EVENT_START_FAILED | |
| WMI_SCAN_EVENT_FOREIGN_CHANNEL | |
| WMI_SCAN_EVENT_COMPLETED | |
| WMI_SCAN_EVENT_DEQUEUED | |
| WMI_SCAN_EVENT_PREEMPTED | |
| WMI_SCAN_EVENT_RESTARTED; |
| |
| cmd->dwell_time_active = scan_req->maxChannelTime; |
| |
| if (scan_req->scanType == eSIR_ACTIVE_SCAN) { |
| /* In Active scan case, the firmware has to do passive scan on DFS channels |
| * So the passive scan duration should be updated properly so that the duration |
| * will be sufficient enough to receive the beacon from AP */ |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_PASSIVE_MAXIMUM_CHANNEL_TIME, |
| &dwell_time) != eSIR_SUCCESS) { |
| WMA_LOGE("Failed to get passive max channel value" |
| "using default value"); |
| dwell_time = WMA_DWELL_TIME_PASSIVE_DEFAULT; |
| } |
| cmd->dwell_time_passive = dwell_time; |
| } |
| else |
| cmd->dwell_time_passive = scan_req->maxChannelTime; |
| |
| /* Ensure correct number of probes are sent on active channel */ |
| cmd->repeat_probe_time = cmd->dwell_time_active / WMA_SCAN_NPROBES_DEFAULT; |
| |
| /* CSR sends min_rest_Time, max_rest_time and idle_time |
| * for staying on home channel to continue data traffic. |
| * Rome fw has facility to monitor the traffic |
| * and move to next channel. Stay on the channel for min_rest_time |
| * and then leave if there is no traffic. |
| */ |
| cmd->min_rest_time = scan_req->min_rest_time; |
| cmd->max_rest_time = scan_req->restTime; |
| |
| /* Check for traffic at idle_time interval after min_rest_time. |
| * Default value is 25 ms to allow full use of max_rest_time |
| * when voice packets are running at 20 ms interval. |
| */ |
| cmd->idle_time = scan_req->idle_time; |
| |
| /* Large timeout value for full scan cycle, 30 seconds */ |
| cmd->max_scan_time = WMA_HW_DEF_SCAN_MAX_DURATION; |
| |
| /* add DS param IE in probe req frame */ |
| cmd->scan_ctrl_flags |= WMI_SCAN_ADD_DS_IE_IN_PROBE_REQ; |
| |
| /* set flag to get chan stats */ |
| if (pMac->snr_monitor_enabled) |
| cmd->scan_ctrl_flags |= WMI_SCAN_CHAN_STAT_EVENT; |
| |
| /* do not add OFDM rates in 11B mode */ |
| if (scan_req->dot11mode != WNI_CFG_DOT11_MODE_11B) |
| cmd->scan_ctrl_flags |= WMI_SCAN_ADD_OFDM_RATES; |
| else |
| WMA_LOGD("OFDM_RATES not included in 11B mode"); |
| |
| /* Do not combine multiple channels in a single burst. Come back |
| * to home channel for data traffic after every foreign channel. |
| * By default, prefer throughput performance over scan cycle time. |
| */ |
| cmd->burst_duration = 0; |
| |
| /* mac randomization attributes */ |
| if (scan_req->enable_scan_randomization) { |
| cmd->scan_ctrl_flags |= WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ | |
| WMI_SCAN_RANDOM_SEQ_NO_IN_PROBE_REQ; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(scan_req->mac_addr, &cmd->mac_addr); |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(scan_req->mac_addr_mask, |
| &cmd->mac_mask); |
| } |
| |
| if (!scan_req->p2pScanType) { |
| WMA_LOGD("Normal Scan request"); |
| cmd->scan_ctrl_flags |= WMI_SCAN_ADD_CCK_RATES; |
| if (!scan_req->numSsid) |
| cmd->scan_ctrl_flags |= WMI_SCAN_ADD_BCAST_PROBE_REQ; |
| if (scan_req->scanType == eSIR_PASSIVE_SCAN) |
| cmd->scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE; |
| |
| if (ACS_FW_REPORT_PARAM_CONFIGURED) { |
| /* add chan stat info report tag */ |
| if (scan_req->bssType == eSIR_INFRA_AP_MODE) { |
| cmd->scan_ctrl_flags |= |
| WMI_SCAN_CHAN_STAT_EVENT; |
| WMA_LOGI("set ACS ctrl BIT"); |
| } |
| } |
| |
| |
| cmd->scan_ctrl_flags |= WMI_SCAN_ADD_TPC_IE_IN_PROBE_REQ; |
| cmd->scan_ctrl_flags |= WMI_SCAN_FILTER_PROBE_REQ; |
| |
| if (scan_req->ie_whitelist) { |
| cmd->scan_ctrl_flags |= |
| WMI_SCAN_ENABLE_IE_WHTELIST_IN_PROBE_REQ; |
| for (i = 0; i < PROBE_REQ_BITMAP_LEN; i++) |
| cmd->ie_bitmap[i] = |
| scan_req->probe_req_ie_bitmap[i]; |
| } |
| |
| cmd->num_vendor_oui = scan_req->num_vendor_oui; |
| |
| /* |
| * Decide burst_duration and dwell_time_active based on |
| * what type of devices are active. |
| */ |
| do { |
| if (wma_is_SAP_active(wma_handle) && |
| wma_is_P2P_GO_active(wma_handle) && |
| wma_is_STA_active(wma_handle)) { |
| if (scan_req->maxChannelTime <= |
| WMA_3PORT_CONC_SCAN_MAX_BURST_DURATION) |
| cmd->burst_duration = scan_req->maxChannelTime; |
| else |
| cmd->burst_duration = |
| WMA_3PORT_CONC_SCAN_MAX_BURST_DURATION; |
| break; |
| } |
| if (wma_is_SAP_active(wma_handle)) { |
| /* Background scan while SoftAP is sending beacons. |
| * Max duration of CTS2self is 32 ms, which limits |
| * the dwell time. |
| */ |
| cmd->dwell_time_active = MIN(scan_req->maxChannelTime, |
| (WMA_CTS_DURATION_MS_MAX - WMA_ROAM_SCAN_CHANNEL_SWITCH_TIME)); |
| cmd->dwell_time_passive = cmd->dwell_time_active; |
| cmd->burst_duration = 0; |
| break; |
| } |
| if (wma_handle->miracast_value && |
| wma_is_mcc_24G(wma_handle)) { |
| cmd->max_rest_time = |
| pMac->f_sta_miracast_mcc_rest_time_val; |
| } |
| if (wma_is_P2P_GO_active(wma_handle)) { |
| /* Background scan while GO is sending beacons. |
| * Every off-channel transition has overhead of 2 beacon |
| * intervals for NOA. Maximize number of channels in |
| * every transition by using burst scan. |
| */ |
| if (wma_handle->miracast_value) { |
| /* When miracast is running, burst duration |
| * needs to be minimum to avoid any stutter |
| * or glitch in miracast during station scan |
| */ |
| if (scan_req->maxChannelTime <= |
| WMA_GO_MIN_ACTIVE_SCAN_BURST_DURATION) |
| cmd->burst_duration = |
| scan_req->maxChannelTime; |
| else |
| cmd->burst_duration = |
| WMA_GO_MIN_ACTIVE_SCAN_BURST_DURATION; |
| } |
| else { |
| /* If miracast is not running, accomodate max |
| * stations to make the scans faster |
| */ |
| cmd->burst_duration = |
| WMA_BURST_SCAN_MAX_NUM_OFFCHANNELS * |
| scan_req->maxChannelTime; |
| if (cmd->burst_duration > |
| WMA_GO_MAX_ACTIVE_SCAN_BURST_DURATION) { |
| u_int8_t channels = |
| WMA_P2P_SCAN_MAX_BURST_DURATION |
| / scan_req->maxChannelTime; |
| if (channels) |
| cmd->burst_duration = channels * |
| scan_req->maxChannelTime; |
| else |
| cmd->burst_duration = |
| WMA_GO_MAX_ACTIVE_SCAN_BURST_DURATION; |
| } |
| } |
| break; |
| } |
| if (wma_is_STA_active(wma_handle) || |
| wma_is_P2P_CLI_active(wma_handle)) { |
| if (scan_req->burst_scan_duration) |
| cmd->burst_duration = |
| scan_req->burst_scan_duration; |
| else |
| /* Typical background scan. |
| * Disable burst scan for now. |
| */ |
| cmd->burst_duration = 0; |
| break; |
| } |
| } while (0); |
| |
| } |
| else { |
| WMA_LOGD("P2P Scan"); |
| switch (scan_req->p2pScanType) { |
| case P2P_SCAN_TYPE_LISTEN: |
| WMA_LOGD("P2P_SCAN_TYPE_LISTEN"); |
| cmd->scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE; |
| cmd->notify_scan_events |= |
| WMI_SCAN_EVENT_FOREIGN_CHANNEL; |
| cmd->repeat_probe_time = 0; |
| break; |
| case P2P_SCAN_TYPE_SEARCH: |
| WMA_LOGD("P2P_SCAN_TYPE_SEARCH"); |
| cmd->scan_ctrl_flags |= WMI_SCAN_FILTER_PROBE_REQ; |
| /* Default P2P burst duration of 120 ms will cover |
| * 3 channels with default max dwell time 40 ms. |
| * Cap limit will be set by |
| * WMA_P2P_SCAN_MAX_BURST_DURATION. Burst duration |
| * should be such that no channel is scanned less |
| * than the dwell time in normal scenarios. |
| */ |
| if (scan_req->channelList.numChannels == P2P_SOCIAL_CHANNELS |
| && (!(wma_handle->miracast_value))) |
| cmd->repeat_probe_time = scan_req->maxChannelTime/5; |
| else |
| cmd->repeat_probe_time = scan_req->maxChannelTime/3; |
| |
| cmd->burst_duration = WMA_BURST_SCAN_MAX_NUM_OFFCHANNELS * scan_req->maxChannelTime; |
| if (cmd->burst_duration > WMA_P2P_SCAN_MAX_BURST_DURATION) { |
| u_int8_t channels = WMA_P2P_SCAN_MAX_BURST_DURATION / scan_req->maxChannelTime; |
| if (channels) |
| cmd->burst_duration = channels * scan_req->maxChannelTime; |
| else |
| cmd->burst_duration = WMA_P2P_SCAN_MAX_BURST_DURATION; |
| } |
| break; |
| default: |
| WMA_LOGE("Invalid scan type"); |
| goto error; |
| } |
| } |
| |
| cmd->n_probes = (cmd->repeat_probe_time > 0) ? |
| cmd->dwell_time_active/cmd->repeat_probe_time : 0; |
| |
| buf_ptr += sizeof(*cmd); |
| tmp_ptr = (u_int32_t *) (buf_ptr + WMI_TLV_HDR_SIZE); |
| |
| if (scan_req->channelList.numChannels) { |
| chan_list = (wmi_chan_list *) tmp_ptr; |
| cmd->num_chan = scan_req->channelList.numChannels; |
| for (i = 0; i < scan_req->channelList.numChannels; ++i) { |
| tmp_ptr[i] = vos_chan_to_freq( |
| scan_req->channelList.channelNumber[i]); |
| } |
| } |
| WMITLV_SET_HDR(buf_ptr, |
| WMITLV_TAG_ARRAY_UINT32, |
| (cmd->num_chan * sizeof(u_int32_t))); |
| buf_ptr += WMI_TLV_HDR_SIZE + (cmd->num_chan * sizeof(u_int32_t)); |
| if (scan_req->numSsid > SIR_SCAN_MAX_NUM_SSID) { |
| WMA_LOGE("Invalid value for numSsid"); |
| goto error; |
| } |
| cmd->num_ssids = scan_req->numSsid; |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_FIXED_STRUC, |
| (cmd->num_ssids * sizeof(wmi_ssid))); |
| if (scan_req->numSsid) { |
| ssid = (wmi_ssid *) (buf_ptr + WMI_TLV_HDR_SIZE); |
| for (i = 0; i < scan_req->numSsid; ++i) { |
| ssid->ssid_len = scan_req->ssId[i].length; |
| vos_mem_copy(ssid->ssid, scan_req->ssId[i].ssId, |
| scan_req->ssId[i].length); |
| ssid++; |
| } |
| } |
| buf_ptr += WMI_TLV_HDR_SIZE + (cmd->num_ssids * sizeof(wmi_ssid)); |
| |
| cmd->num_bssid = 1; |
| |
| if (!scan_req->p2pScanType) { |
| if (wma_is_SAP_active(wma_handle)) { |
| SSID_num = cmd->num_ssids * cmd->num_bssid; |
| cmd->repeat_probe_time = |
| probeTime_dwellTime_map[MIN(SSID_num, |
| WMA_DWELL_TIME_PROBE_TIME_MAP_SIZE - 1)]. |
| probe_time; |
| cmd->n_probes = (cmd->repeat_probe_time > 0) ? |
| cmd->dwell_time_active/ |
| cmd->repeat_probe_time : 0; |
| } |
| } |
| WMA_LOGI("Scan Type 0x%x, Active dwell time %u, Passive dwell time %u", |
| scan_req->scanType, cmd->dwell_time_active, |
| cmd->dwell_time_passive); |
| WMA_LOGI("Scan repeat_probe_time %u n_probes %u num_ssids %u num_bssid %u", |
| cmd->repeat_probe_time, |
| cmd->n_probes, |
| cmd->num_ssids, |
| cmd->num_bssid); |
| |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_FIXED_STRUC, |
| (cmd->num_bssid * sizeof(wmi_mac_addr))); |
| bssid = (wmi_mac_addr *) (buf_ptr + WMI_TLV_HDR_SIZE); |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(scan_req->bssId, bssid); |
| buf_ptr += WMI_TLV_HDR_SIZE + (cmd->num_bssid * sizeof(wmi_mac_addr)); |
| |
| cmd->ie_len = scan_req->uIEFieldLen; |
| ie_len_with_pad = roundup(scan_req->uIEFieldLen, sizeof(u_int32_t)); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, ie_len_with_pad); |
| if (scan_req->uIEFieldLen) { |
| vos_mem_copy(buf_ptr + WMI_TLV_HDR_SIZE, |
| (u_int8_t *)scan_req + |
| (scan_req->uIEFieldOffset), |
| scan_req->uIEFieldLen); |
| } |
| buf_ptr += WMI_TLV_HDR_SIZE + ie_len_with_pad; |
| |
| /* mac randomization */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| scan_req->num_vendor_oui * |
| sizeof(wmi_vendor_oui)); |
| |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| if (cmd->num_vendor_oui != 0) { |
| voui = (wmi_vendor_oui *)buf_ptr; |
| pvoui = (struct vendor_oui *)((u_int8_t *)scan_req + |
| (scan_req->oui_field_offset)); |
| for (i = 0; i < cmd->num_vendor_oui; i++) { |
| WMITLV_SET_HDR(&voui[i].tlv_header, |
| WMITLV_TAG_STRUC_wmi_vendor_oui, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vendor_oui)); |
| voui[i].oui_type_subtype = pvoui[i].oui_type | |
| (pvoui[i].oui_subtype << 24); |
| } |
| buf_ptr += cmd->num_vendor_oui * |
| sizeof(wmi_vendor_oui); |
| } |
| |
| *buf_len = len; |
| return VOS_STATUS_SUCCESS; |
| error: |
| vos_mem_free(*buf); |
| *buf = NULL; |
| return vos_status; |
| } |
| |
| /* function : wma_get_buf_stop_scan_cmd |
| * Description : function to fill the args for wmi_stop_scan_cmd |
| * Args : wma handle, wmi command buffer, buffer length, vdev_id |
| * Returns : failure or success |
| */ |
| VOS_STATUS wma_get_buf_stop_scan_cmd(tp_wma_handle wma_handle, |
| wmi_buf_t *buf, |
| int *buf_len, |
| tAbortScanParams *abort_scan_req) |
| { |
| wmi_stop_scan_cmd_fixed_param *cmd; |
| VOS_STATUS vos_status; |
| int len = sizeof(*cmd); |
| |
| /* Allocate the memory */ |
| *buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!*buf) { |
| WMA_LOGP("%s: failed to allocate memory for stop scan cmd", |
| __func__); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| cmd = (wmi_stop_scan_cmd_fixed_param *) wmi_buf_data(*buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_stop_scan_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_stop_scan_cmd_fixed_param)); |
| cmd->vdev_id = abort_scan_req->SessionId; |
| cmd->requestor = |
| wma_handle->interfaces[cmd->vdev_id].scan_info.scan_requestor_id; |
| cmd->scan_id = wma_handle->interfaces[cmd->vdev_id].scan_info.scan_id; |
| /* stop the scan with the corresponding scan_id */ |
| cmd->req_type = WMI_SCAN_STOP_ONE; |
| |
| *buf_len = len; |
| vos_status = VOS_STATUS_SUCCESS; |
| error: |
| return vos_status; |
| |
| } |
| |
| void wma_process_link_status_req(tp_wma_handle wma, |
| tAniGetLinkStatus *pGetLinkStatus) |
| { |
| wmi_buf_t buf; |
| wmi_request_stats_cmd_fixed_param *cmd; |
| u_int8_t len = sizeof(wmi_request_stats_cmd_fixed_param); |
| struct wma_txrx_node *iface = &wma->interfaces[pGetLinkStatus->sessionId]; |
| |
| if (iface->plink_status_req) { |
| WMA_LOGE( |
| "%s:previous link status request is pending,deleting the new request", |
| __func__); |
| vos_mem_free(pGetLinkStatus); |
| return; |
| } |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| goto end; |
| } |
| |
| iface->plink_status_req = pGetLinkStatus; |
| cmd = (wmi_request_stats_cmd_fixed_param *)wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_request_stats_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_request_stats_cmd_fixed_param)); |
| cmd->stats_id = WMI_REQUEST_VDEV_RATE_STAT; |
| cmd->vdev_id = pGetLinkStatus->sessionId; |
| if (wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_REQUEST_STATS_CMDID)) { |
| WMA_LOGE("Failed to send WMI link status request to fw"); |
| wmi_buf_free(buf); |
| iface->plink_status_req = NULL; |
| goto end; |
| } |
| |
| return; |
| |
| end: |
| wma_post_link_status(pGetLinkStatus, LINK_STATUS_LEGACY); |
| } |
| |
| VOS_STATUS wma_send_snr_request(tp_wma_handle wma_handle, void *pGetRssiReq, |
| v_S7_t first_rssi) |
| { |
| wmi_buf_t buf; |
| wmi_request_stats_cmd_fixed_param *cmd; |
| u_int8_t len = sizeof(wmi_request_stats_cmd_fixed_param); |
| tAniGetRssiReq *pRssiBkUp = NULL; |
| |
| /* command is in progess */ |
| if(NULL != wma_handle->pGetRssiReq) |
| return VOS_STATUS_SUCCESS; |
| |
| wma_handle->first_rssi = first_rssi; |
| |
| /* create a copy of csrRssiCallback to send rssi value |
| * after wmi event |
| */ |
| if(pGetRssiReq) { |
| pRssiBkUp = adf_os_mem_alloc(NULL, sizeof(tAniGetRssiReq)); |
| if(!pRssiBkUp) { |
| WMA_LOGE("Failed to allocate memory for tAniGetRssiReq"); |
| wma_handle->pGetRssiReq = NULL; |
| return VOS_STATUS_E_FAILURE; |
| } |
| adf_os_mem_set(pRssiBkUp, 0, sizeof(tAniGetRssiReq)); |
| pRssiBkUp->sessionId = ((tAniGetRssiReq*)pGetRssiReq)->sessionId; |
| pRssiBkUp->rssiCallback = ((tAniGetRssiReq*)pGetRssiReq)->rssiCallback; |
| pRssiBkUp->pDevContext = ((tAniGetRssiReq*)pGetRssiReq)->pDevContext; |
| wma_handle->pGetRssiReq = (void*)pRssiBkUp; |
| } |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| adf_os_mem_free(pRssiBkUp); |
| wma_handle->pGetRssiReq = NULL; |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| cmd = (wmi_request_stats_cmd_fixed_param *)wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, WMITLV_TAG_STRUC_wmi_request_stats_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_request_stats_cmd_fixed_param)); |
| cmd->stats_id = WMI_REQUEST_VDEV_STAT; |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len,WMI_REQUEST_STATS_CMDID)) { |
| WMA_LOGE("Failed to send host stats request to fw"); |
| wmi_buf_free(buf); |
| adf_os_mem_free(pRssiBkUp); |
| wma_handle->pGetRssiReq = NULL; |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| VOS_STATUS WDA_GetSnr(tAniGetSnrReq *psnr_req) |
| { |
| wmi_buf_t buf; |
| wmi_request_stats_cmd_fixed_param *cmd; |
| tAniGetSnrReq *psnr_req_bkp; |
| u_int8_t len = sizeof(wmi_request_stats_cmd_fixed_param); |
| void *vos_context = vos_get_global_context(VOS_MODULE_ID_WDA, NULL); |
| tp_wma_handle wma_handle = NULL; |
| struct wma_txrx_node *intr; |
| |
| wma_handle = vos_get_context(VOS_MODULE_ID_WDA, vos_context); |
| |
| if (NULL == wma_handle) { |
| WMA_LOGE("%s : Failed to get wma_handle", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| intr = &wma_handle->interfaces[psnr_req->sessionId]; |
| /* command is in progess */ |
| if(NULL != intr->psnr_req) { |
| WMA_LOGE("%s : previous snr request is pending", __func__); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| psnr_req_bkp = adf_os_mem_alloc(NULL, sizeof(tAniGetSnrReq)); |
| if (!psnr_req_bkp) { |
| WMA_LOGE("Failed to allocate memory for tAniGetSnrReq"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| adf_os_mem_set(psnr_req_bkp, 0, sizeof(tAniGetSnrReq)); |
| psnr_req_bkp->staId = psnr_req->staId; |
| psnr_req_bkp->pDevContext = psnr_req->pDevContext; |
| psnr_req_bkp->snrCallback = psnr_req->snrCallback; |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| adf_os_mem_free(psnr_req_bkp); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| cmd = (wmi_request_stats_cmd_fixed_param *)wmi_buf_data(buf); |
| cmd->vdev_id = psnr_req->sessionId; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_request_stats_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_request_stats_cmd_fixed_param)); |
| cmd->stats_id = WMI_REQUEST_VDEV_STAT; |
| intr->psnr_req = (void *)psnr_req_bkp; |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_REQUEST_STATS_CMDID)) { |
| WMA_LOGE("Failed to send host stats request to fw"); |
| wmi_buf_free(buf); |
| adf_os_mem_free(psnr_req_bkp); |
| intr->psnr_req = NULL; |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| #ifdef WLAN_FEATURE_TSF |
| /** |
| * wma_capture_tsf() - send wmi to fw to capture tsf |
| * |
| * @wma_handle: wma handler |
| * @vdev_id: vdev id |
| * |
| * Return: wmi send state |
| */ |
| static VOS_STATUS wma_capture_tsf(tp_wma_handle wma_handle, uint32_t vdev_id) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_buf_t buf; |
| wmi_vdev_tsf_tstamp_action_cmd_fixed_param *cmd; |
| int status; |
| int len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: failed to allocate memory for cap tsf cmd", |
| __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (wmi_vdev_tsf_tstamp_action_cmd_fixed_param *) wmi_buf_data(buf); |
| cmd->vdev_id = vdev_id; |
| cmd->tsf_action = TSF_TSTAMP_CAPTURE_REQ; |
| |
| WMA_LOGD("%s :vdev_id %u, TSF_TSTAMP_CAPTURE_REQ", |
| __func__, cmd->vdev_id); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_tsf_tstamp_action_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vdev_tsf_tstamp_action_cmd_fixed_param)); |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_VDEV_TSF_TSTAMP_ACTION_CMDID); |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send returned Error %d", status); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| |
| error: |
| if (buf) |
| wmi_buf_free(buf); |
| return vos_status; |
| } |
| |
| /** |
| * wma_reset_tsf_gpio() - send wmi to fw to reset GPIO |
| * |
| * @wma_handle: wma handler |
| * @vdev_id: vdev id |
| * |
| * Return: wmi send state |
| */ |
| static VOS_STATUS wma_reset_tsf_gpio(tp_wma_handle wma_handle, uint32_t vdev_id) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_buf_t buf; |
| wmi_vdev_tsf_tstamp_action_cmd_fixed_param *cmd; |
| int status; |
| int len = sizeof(*cmd); |
| uint8_t *buf_ptr; |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: failed to allocate memory for reset tsf gpio", |
| __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_vdev_tsf_tstamp_action_cmd_fixed_param *) buf_ptr; |
| cmd->vdev_id = vdev_id; |
| cmd->tsf_action = TSF_TSTAMP_CAPTURE_RESET; |
| |
| WMA_LOGD("%s :vdev_id %u, TSF_TSTAMP_CAPTURE_RESET", |
| __func__, cmd->vdev_id); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_tsf_tstamp_action_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vdev_tsf_tstamp_action_cmd_fixed_param)); |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_VDEV_TSF_TSTAMP_ACTION_CMDID); |
| |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send returned Error %d", status); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| return VOS_STATUS_SUCCESS; |
| |
| error: |
| if (buf) |
| wmi_buf_free(buf); |
| return vos_status; |
| } |
| #else |
| static VOS_STATUS wma_capture_tsf(tp_wma_handle wma_handle, uint32_t vdev_id) |
| { |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static VOS_STATUS wma_reset_tsf_gpio(tp_wma_handle wma_handle, uint32_t vdev_id) |
| { |
| return VOS_STATUS_SUCCESS; |
| } |
| #endif |
| |
| /* function : wma_start_scan |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_start_scan(tp_wma_handle wma_handle, |
| tSirScanOffloadReq *scan_req, v_U16_t msg_type) |
| { |
| uint32_t vdev_id, scan_id; |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_buf_t buf = NULL; |
| wmi_start_scan_cmd_fixed_param *cmd; |
| int status = 0; |
| int len; |
| tSirScanOffloadEvent *scan_event; |
| |
| if (scan_req->sessionId > wma_handle->max_bssid) { |
| WMA_LOGE("%s: Invalid vdev_id %d, msg_type : 0x%x", __func__, |
| scan_req->sessionId, msg_type); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error1; |
| } |
| |
| /* Sanity check to find whether vdev id active or not */ |
| if (!wma_handle->interfaces[scan_req->sessionId].handle) { |
| WMA_LOGE("vdev id [%d] is not active", scan_req->sessionId); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error1; |
| } |
| if (msg_type == WDA_START_SCAN_OFFLOAD_REQ) { |
| /* Start the timer for scan completion */ |
| vos_status = vos_timer_start(&wma_handle->wma_scan_comp_timer, |
| WMA_HW_DEF_SCAN_MAX_DURATION); |
| if (vos_status != VOS_STATUS_SUCCESS ) { |
| WMA_LOGE("Failed to start the scan completion timer"); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error1; |
| } |
| } |
| /* Fill individual elements of wmi_start_scan_req and |
| * TLV for channel list, bssid, ssid etc ... */ |
| vos_status = wma_get_buf_start_scan_cmd(wma_handle, scan_req, |
| &buf, &len); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to get buffer for start scan cmd"); |
| goto error0; |
| } |
| |
| if (NULL == buf) { |
| WMA_LOGE("Failed to get buffer for saving current scan info"); |
| vos_status = VOS_STATUS_E_NOMEM; |
| goto error0; |
| } |
| |
| /* Save current scan info */ |
| cmd = (wmi_start_scan_cmd_fixed_param *) wmi_buf_data(buf); |
| if (msg_type == WDA_CHNL_SWITCH_REQ) { |
| /* Adjust parameters for channel switch scan */ |
| cmd->min_rest_time = WMA_ROAM_PREAUTH_REST_TIME; |
| cmd->max_rest_time = WMA_ROAM_PREAUTH_REST_TIME; |
| cmd->max_scan_time = WMA_ROAM_PREAUTH_MAX_SCAN_TIME; |
| cmd->scan_priority = WMI_SCAN_PRIORITY_VERY_HIGH; |
| adf_os_spin_lock_bh(&wma_handle->roam_preauth_lock); |
| cmd->scan_id = ( (cmd->scan_id & WMA_MAX_SCAN_ID) | |
| WMA_HOST_ROAM_SCAN_REQID_PREFIX); |
| wma_handle->roam_preauth_scan_id = cmd->scan_id; |
| adf_os_spin_unlock_bh(&wma_handle->roam_preauth_lock); |
| } |
| |
| wma_set_scan_info(wma_handle, cmd->scan_id, |
| cmd->scan_req_id, cmd->vdev_id, |
| scan_req->p2pScanType); |
| |
| if (scan_req->p2pScanType) |
| cmd->scan_priority = WMI_SCAN_PRIORITY_MEDIUM; |
| |
| WMA_LOGD("scan_id %x, vdev_id %x, scan type %x, msg_type %x", |
| cmd->scan_id, cmd->vdev_id, scan_req->p2pScanType, |
| msg_type); |
| |
| /* |
| * Cache vdev_id and scan_id because cmd is freed after calling |
| * wmi_unified_cmd_send cmd. WMI internally frees cmd buffer after |
| * getting TX complete from CE |
| */ |
| vdev_id = cmd->vdev_id; |
| scan_id = cmd->scan_id; |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_START_SCAN_CMDID); |
| /* Call the wmi api to request the scan */ |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send returned Error %d", |
| status); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| /* Update the scan parameters for handler */ |
| wma_handle->wma_scan_timer_info.vdev_id = vdev_id; |
| wma_handle->wma_scan_timer_info.scan_id = scan_id; |
| |
| return VOS_STATUS_SUCCESS; |
| error: |
| wma_reset_scan_info(wma_handle, cmd->vdev_id); |
| if (buf) |
| wmi_buf_free(buf); |
| error0: |
| /* Stop the timer for scan completion */ |
| if (vos_timer_stop(&wma_handle->wma_scan_comp_timer) |
| != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to stop the scan completion timer"); |
| } |
| error1: |
| /* Send completion event for only for start scan request */ |
| if (msg_type == WDA_START_SCAN_OFFLOAD_REQ) { |
| scan_event = |
| (tSirScanOffloadEvent *) vos_mem_malloc(sizeof(tSirScanOffloadEvent)); |
| if (!scan_event) { |
| WMA_LOGP("%s: Failed to allocate memory for scan rsp", |
| __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| memset(scan_event, 0x00, sizeof(*scan_event)); |
| scan_event->event = WMI_SCAN_EVENT_COMPLETED; |
| scan_event->reasonCode = eSIR_SME_SCAN_FAILED; |
| scan_event->p2pScanType = scan_req->p2pScanType; |
| scan_event->sessionId = scan_req->sessionId; |
| wma_send_msg(wma_handle, WDA_RX_SCAN_EVENT, (void *) scan_event, 0) ; |
| } |
| return vos_status; |
| } |
| |
| /* function : wma_stop_scan |
| * Description : function to send the stop scan command |
| * Args : wma_handle |
| * Returns : failure or success |
| */ |
| static VOS_STATUS wma_stop_scan(tp_wma_handle wma_handle, |
| tAbortScanParams *abort_scan_req) |
| { |
| VOS_STATUS vos_status; |
| wmi_buf_t buf; |
| int status = 0; |
| int len; |
| |
| vos_status = wma_get_buf_stop_scan_cmd(wma_handle, &buf, &len, |
| abort_scan_req); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to get buffer for stop scan cmd"); |
| goto error1; |
| } |
| |
| if (NULL == buf) { |
| WMA_LOGE("Failed to get buffer for stop scan cmd"); |
| vos_status = VOS_STATUS_E_FAULT; |
| goto error1; |
| } |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_STOP_SCAN_CMDID); |
| /* Call the wmi api to request the scan */ |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send WMI_STOP_SCAN_CMDID returned Error %d", |
| status); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| WMA_LOGI("WMA --> WMI_STOP_SCAN_CMDID"); |
| |
| return VOS_STATUS_SUCCESS; |
| error: |
| if (buf) |
| wmi_buf_free(buf); |
| error1: |
| return vos_status; |
| } |
| |
| /* function : wma_update_channel_list |
| * Description : Function is used to update the support channel list |
| * Args : wma_handle, list of supported channels and power |
| * Returns : SUCCESS or FAILURE |
| */ |
| VOS_STATUS wma_update_channel_list(WMA_HANDLE handle, |
| tSirUpdateChanList *chan_list) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| wmi_buf_t buf; |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_scan_chan_list_cmd_fixed_param *cmd; |
| int status, i; |
| u_int8_t *buf_ptr; |
| wmi_channel *chan_info; |
| u_int16_t len = sizeof(*cmd) + WMI_TLV_HDR_SIZE; |
| |
| len += sizeof(wmi_channel) * chan_list->numChan; |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate memory"); |
| vos_status = VOS_STATUS_E_NOMEM; |
| goto end; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_scan_chan_list_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_scan_chan_list_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_scan_chan_list_cmd_fixed_param)); |
| |
| WMA_LOGD("no of channels = %d, len = %d", chan_list->numChan, len); |
| |
| cmd->num_scan_chans = chan_list->numChan; |
| WMITLV_SET_HDR((buf_ptr + sizeof(wmi_scan_chan_list_cmd_fixed_param)), |
| WMITLV_TAG_ARRAY_STRUC, |
| sizeof(wmi_channel) * chan_list->numChan); |
| chan_info = (wmi_channel *) (buf_ptr + sizeof(*cmd) + WMI_TLV_HDR_SIZE); |
| |
| WMA_LOGD("ht %d, vht %d, vht_24 %d", chan_list->ht_en, |
| chan_list->vht_en, chan_list->vht_24_en); |
| for (i = 0; i < chan_list->numChan; ++i) { |
| WMITLV_SET_HDR(&chan_info->tlv_header, |
| WMITLV_TAG_STRUC_wmi_channel, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_channel)); |
| chan_info->mhz = |
| vos_chan_to_freq(chan_list->chanParam[i].chanId); |
| chan_info->band_center_freq1 = chan_info->mhz; |
| chan_info->band_center_freq2 = 0; |
| if (chan_list->chanParam[i].dfsSet) { |
| WMI_SET_CHANNEL_FLAG(chan_info, WMI_CHAN_FLAG_PASSIVE); |
| } |
| |
| if (chan_list->chanParam[i].half_rate) { |
| WMI_SET_CHANNEL_FLAG(chan_info, WMI_CHAN_FLAG_HALF_RATE); |
| } else if (chan_list->chanParam[i].quarter_rate) { |
| WMI_SET_CHANNEL_FLAG(chan_info, WMI_CHAN_FLAG_QUARTER_RATE); |
| } |
| |
| if (chan_info->mhz < WMA_2_4_GHZ_MAX_FREQ) { |
| WMI_SET_CHANNEL_MODE(chan_info, MODE_11G); |
| if (chan_list->vht_en && chan_list->vht_24_en) |
| WMI_SET_CHANNEL_FLAG(chan_info, |
| WMI_CHAN_FLAG_ALLOW_VHT); |
| } else { |
| WMI_SET_CHANNEL_MODE(chan_info, MODE_11A); |
| if (chan_list->vht_en) |
| WMI_SET_CHANNEL_FLAG(chan_info, |
| WMI_CHAN_FLAG_ALLOW_VHT); |
| } |
| |
| if (chan_list->ht_en) |
| WMI_SET_CHANNEL_FLAG(chan_info, |
| WMI_CHAN_FLAG_ALLOW_HT); |
| |
| WMI_SET_CHANNEL_MAX_TX_POWER(chan_info, |
| chan_list->chanParam[i].pwr); |
| |
| WMI_SET_CHANNEL_REG_POWER(chan_info, |
| chan_list->chanParam[i].pwr); |
| WMA_LOGI(FL("Channel %u[%d] DFS[%d] TX pwr = %d "), |
| chan_info->mhz, i, chan_list->chanParam[i].dfsSet, |
| chan_list->chanParam[i].pwr); |
| /*TODO: Set WMI_SET_CHANNEL_MIN_POWER */ |
| /*TODO: Set WMI_SET_CHANNEL_ANTENNA_MAX */ |
| /*TODO: WMI_SET_CHANNEL_REG_CLASSID*/ |
| chan_info++; |
| } |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_SCAN_CHAN_LIST_CMDID); |
| |
| if (status != EOK) { |
| vos_status = VOS_STATUS_E_FAILURE; |
| WMA_LOGE("Failed to send WMI_SCAN_CHAN_LIST_CMDID"); |
| wmi_buf_free(buf); |
| } |
| end: |
| return vos_status; |
| } |
| |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| VOS_STATUS wma_roam_scan_fill_self_caps(tp_wma_handle wma_handle, |
| wmi_roam_offload_tlv_param *roam_offload_params, |
| tSirRoamOffloadScanReq *roam_req) |
| { |
| struct sAniSirGlobal *pMac = NULL; |
| tSirMacCapabilityInfo selfCaps; |
| tANI_U32 val = 0; |
| tANI_U32 nCfgValue; |
| tANI_U16 *pCfgValue16; |
| tANI_U8 nCfgValue8, *pCfgValue8; |
| tSirMacQosInfoStation macQosInfoSta; |
| union { |
| tANI_U16 nCfgValue16; |
| tSirMacHTCapabilityInfo htCapInfo; |
| tSirMacExtendedHTCapabilityInfo extHtCapInfo; |
| } uHTCapabilityInfo; |
| |
| vos_mem_set(&macQosInfoSta, 0, sizeof(tSirMacQosInfoStation)); |
| /* Roaming is done only for INFRA STA type. |
| * So, ess will be one and ibss will be Zero */ |
| pMac = (struct sAniSirGlobal*)vos_get_context(VOS_MODULE_ID_PE, |
| wma_handle->vos_context); |
| if (!pMac) { |
| WMA_LOGE("%s:NULL pMac ptr. Exiting", __func__); |
| VOS_ASSERT(0); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_PRIVACY_ENABLED, &val) != |
| eSIR_SUCCESS){ |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get WNI_CFG_PRIVACY_ENABLED"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| selfCaps.ess = 1; |
| selfCaps.ibss = 0; |
| if (val) |
| selfCaps.privacy = 1; |
| if (wlan_cfgGetInt(pMac, WNI_CFG_SHORT_PREAMBLE, &val) != |
| eSIR_SUCCESS){ |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get WNI_CFG_SHORT_PREAMBLE"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| if (val) |
| selfCaps.shortPreamble = 1; |
| |
| selfCaps.pbcc = 0; |
| selfCaps.channelAgility = 0; |
| if (wlan_cfgGetInt(pMac, WNI_CFG_11G_SHORT_SLOT_TIME_ENABLED, |
| &val) != eSIR_SUCCESS){ |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get WNI_CFG_11G_SHORT_SLOT_TIME_ENABLED"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| if (val) |
| selfCaps.shortSlotTime = 1; |
| if (wlan_cfgGetInt(pMac, WNI_CFG_11H_ENABLED, &val) != eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get WNI_CFG_11H_ENABLED"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| if (val) |
| selfCaps.spectrumMgt = 1; |
| if (wlan_cfgGetInt(pMac, WNI_CFG_QOS_ENABLED, &val) != eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get WNI_CFG_QOS_ENABLED"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| if (val) |
| selfCaps.qos = 1; |
| if (wlan_cfgGetInt(pMac, WNI_CFG_APSD_ENABLED, &val) != eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get WNI_CFG_APSD_ENABLED"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| if (val) |
| selfCaps.apsd = 1; |
| |
| selfCaps.rrm = pMac->rrm.rrmSmeContext.rrmConfig.rrm_enabled; |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_BLOCK_ACK_ENABLED, &val) != |
| eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get WNI_CFG_BLOCK_ACK_ENABLED"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| selfCaps.delayedBA = |
| (tANI_U16)((val >> WNI_CFG_BLOCK_ACK_ENABLED_DELAYED) & 1); |
| selfCaps.immediateBA = |
| (tANI_U16)((val >> WNI_CFG_BLOCK_ACK_ENABLED_IMMEDIATE) & 1); |
| pCfgValue16 = (tANI_U16 *)&selfCaps; |
| roam_offload_params->capability = (*pCfgValue16) & 0xFFFF; |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_HT_CAP_INFO, &nCfgValue) != |
| eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get WNI_CFG_HT_CAP_INFO"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| uHTCapabilityInfo.nCfgValue16 = nCfgValue & 0xFFFF; |
| roam_offload_params->ht_caps_info = |
| uHTCapabilityInfo.nCfgValue16 & 0xFFFF; |
| if (wlan_cfgGetInt(pMac, WNI_CFG_HT_AMPDU_PARAMS, &nCfgValue) != |
| eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get WNI_CFG_HT_AMPDU_PARAMS"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| /* tSirMacHTParametersInfo */ |
| nCfgValue8 = ( tANI_U8 ) nCfgValue; |
| roam_offload_params->ampdu_param = (nCfgValue8) & 0xFF; |
| |
| val = ROAM_OFFLOAD_NUM_MCS_SET; |
| if (wlan_cfgGetStr(pMac, WNI_CFG_SUPPORTED_MCS_SET, |
| (tANI_U8*)roam_offload_params->mcsset, |
| &val) != eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get WNI_CFG_SUPPORTED_MCS_SET"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| if (wlan_cfgGetInt(pMac, WNI_CFG_EXT_HT_CAP_INFO, &nCfgValue) != |
| eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get WNI_CFG_EXT_HT_CAP_INFO"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| /* uHTCapabilityInfo.extHtCapInfo */ |
| uHTCapabilityInfo.nCfgValue16 = nCfgValue & 0xFFFF; |
| roam_offload_params->ht_ext_cap = |
| uHTCapabilityInfo.nCfgValue16 & 0xFFFF; |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_TX_BF_CAP, &nCfgValue) != |
| eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get WNI_CFG_TX_BF_CAP"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| /* tSirMacTxBFCapabilityInfo */ |
| nCfgValue8 = ( tANI_U8 ) nCfgValue; |
| roam_offload_params->ht_txbf = nCfgValue8 & 0xFF; |
| if (wlan_cfgGetInt(pMac, WNI_CFG_AS_CAP, &nCfgValue) != |
| eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get WNI_CFG_AS_CAP"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| /* tSirMacASCapabilityInfo */ |
| nCfgValue8 = ( tANI_U8 ) nCfgValue; |
| roam_offload_params->asel_cap = nCfgValue8 & 0xFF; |
| |
| /* QOS Info */ |
| if (wlan_cfgGetInt(pMac, WNI_CFG_MAX_SP_LENGTH, &nCfgValue) != |
| eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get WNI_CFG_MAX_SP_LENGTH"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| nCfgValue8 = ( tANI_U8 ) nCfgValue; |
| macQosInfoSta.maxSpLen = nCfgValue8; |
| macQosInfoSta.moreDataAck = 0; |
| macQosInfoSta.qack = 0; |
| macQosInfoSta.acbe_uapsd = roam_req->AcUapsd.acbe_uapsd; |
| macQosInfoSta.acbk_uapsd = roam_req->AcUapsd.acbk_uapsd; |
| macQosInfoSta.acvi_uapsd = roam_req->AcUapsd.acvi_uapsd; |
| macQosInfoSta.acvo_uapsd = roam_req->AcUapsd.acvo_uapsd; |
| pCfgValue8 = (tANI_U8 *)&macQosInfoSta; |
| /* macQosInfoSta Only queue_request is set.Refer to |
| * PopulateDot11fWMMCaps for more details |
| */ |
| roam_offload_params->qos_caps = (*pCfgValue8) & 0xFF; |
| roam_offload_params->wmm_caps = 0x4 & 0xFF; |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| #endif |
| /* function : wma_roam_scan_offload_mode |
| * Description : send WMI_ROAM_SCAN_MODE TLV to firmware. It has a piggyback |
| * : of WMI_ROAM_SCAN_MODE. |
| * Args : scan_cmd_fp contains the scan parameters. |
| * : mode controls rssi based and periodic scans by roam engine. |
| * Returns : |
| */ |
| VOS_STATUS wma_roam_scan_offload_mode(tp_wma_handle wma_handle, |
| wmi_start_scan_cmd_fixed_param *scan_cmd_fp, |
| tSirRoamOffloadScanReq *roam_req, |
| u_int32_t mode, |
| u_int32_t vdev_id) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_buf_t buf = NULL; |
| int status = 0; |
| int len; |
| u_int8_t *buf_ptr; |
| wmi_roam_scan_mode_fixed_param *roam_scan_mode_fp; |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| int auth_mode = WMI_AUTH_NONE; |
| wmi_roam_offload_tlv_param *roam_offload_params; |
| wmi_roam_11i_offload_tlv_param *roam_offload_11i; |
| wmi_roam_11r_offload_tlv_param *roam_offload_11r; |
| wmi_roam_ese_offload_tlv_param *roam_offload_ese; |
| if (roam_req) |
| auth_mode = eCsrAuthType_to_rsn_authmode |
| (roam_req->ConnectedNetwork.authentication, |
| roam_req->ConnectedNetwork.encryption); |
| WMA_LOGD("%s : auth mode = %d",__func__, auth_mode); |
| #endif |
| /* Need to create a buf with roam_scan command at |
| * front and piggyback with scan command */ |
| len = sizeof(wmi_roam_scan_mode_fixed_param) + |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| (2 * WMI_TLV_HDR_SIZE) + |
| #endif |
| sizeof(wmi_start_scan_cmd_fixed_param); |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| if (roam_req && roam_req->RoamOffloadEnabled) { |
| len += sizeof(wmi_roam_offload_tlv_param); |
| len += WMI_TLV_HDR_SIZE; |
| if((auth_mode != WMI_AUTH_NONE) && |
| ((auth_mode != WMI_AUTH_OPEN) || |
| (auth_mode == WMI_AUTH_OPEN && |
| roam_req->MDID.mdiePresent) || roam_req->IsESEAssoc)){ |
| len += WMI_TLV_HDR_SIZE; |
| if(roam_req->IsESEAssoc) |
| len += sizeof(wmi_roam_ese_offload_tlv_param); |
| else if (auth_mode == WMI_AUTH_FT_RSNA || |
| auth_mode == WMI_AUTH_FT_RSNA_PSK || |
| (auth_mode == WMI_AUTH_OPEN && |
| roam_req->MDID.mdiePresent)) |
| len += sizeof(wmi_roam_11r_offload_tlv_param); |
| else |
| len += sizeof(wmi_roam_11i_offload_tlv_param); |
| } else { |
| len += WMI_TLV_HDR_SIZE; |
| } |
| } else { |
| if (roam_req) |
| WMA_LOGD("%s : roam offload = %d", |
| __func__, roam_req->RoamOffloadEnabled); |
| else |
| WMA_LOGD("%s : roam_req is NULL",__func__); |
| len += (2 * WMI_TLV_HDR_SIZE); |
| } |
| if (roam_req && roam_req->RoamOffloadEnabled) { |
| mode = mode | WMI_ROAM_SCAN_MODE_ROAMOFFLOAD; |
| } |
| #endif |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| roam_scan_mode_fp = (wmi_roam_scan_mode_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&roam_scan_mode_fp->tlv_header, |
| WMITLV_TAG_STRUC_wmi_roam_scan_mode_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_roam_scan_mode_fixed_param)); |
| |
| roam_scan_mode_fp->roam_scan_mode = mode; |
| roam_scan_mode_fp->vdev_id = vdev_id; |
| /* Fill in scan parameters suitable for roaming scan */ |
| buf_ptr += sizeof(wmi_roam_scan_mode_fixed_param); |
| vos_mem_copy(buf_ptr, scan_cmd_fp, sizeof(wmi_start_scan_cmd_fixed_param)); |
| /* Ensure there is no additional IEs */ |
| scan_cmd_fp->ie_len = 0; |
| WMITLV_SET_HDR(buf_ptr, |
| WMITLV_TAG_STRUC_wmi_start_scan_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_start_scan_cmd_fixed_param)); |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| buf_ptr += sizeof(wmi_start_scan_cmd_fixed_param); |
| if (roam_req && roam_req->RoamOffloadEnabled) { |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| sizeof(wmi_roam_offload_tlv_param)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| roam_offload_params = (wmi_roam_offload_tlv_param *) buf_ptr; |
| WMITLV_SET_HDR(buf_ptr, |
| WMITLV_TAG_STRUC_wmi_roam_offload_tlv_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_roam_offload_tlv_param)); |
| roam_offload_params->prefer_5g = roam_req->Prefer5GHz; |
| roam_offload_params->rssi_cat_gap = roam_req->RoamRssiCatGap; |
| roam_offload_params->select_5g_margin = roam_req->Select5GHzMargin; |
| roam_offload_params->reassoc_failure_timeout = |
| roam_req->ReassocFailureTimeout; |
| /* Fill the capabilities */ |
| wma_roam_scan_fill_self_caps(wma_handle, roam_offload_params, roam_req); |
| buf_ptr += sizeof(wmi_roam_offload_tlv_param); |
| /* The TLV's are in the order of 11i, 11R, ESE. Hence, |
| * they are filled in the same order.Depending on the |
| * authentication type, the other mode TLV's are nullified |
| * and only headers are filled.*/ |
| if ((auth_mode != WMI_AUTH_NONE) && |
| ((auth_mode != WMI_AUTH_OPEN) || |
| (auth_mode == WMI_AUTH_OPEN && roam_req->MDID.mdiePresent) || |
| (roam_req->IsESEAssoc))) { |
| if (roam_req->IsESEAssoc){ |
| WMITLV_SET_HDR(buf_ptr,WMITLV_TAG_ARRAY_STRUC, |
| WMITLV_GET_STRUCT_TLVLEN(0)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| WMITLV_GET_STRUCT_TLVLEN(0)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| sizeof(wmi_roam_ese_offload_tlv_param)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| roam_offload_ese = |
| (wmi_roam_ese_offload_tlv_param *) buf_ptr; |
| vos_mem_copy (roam_offload_ese->krk, roam_req->KRK, |
| sizeof(roam_req->KRK)); |
| vos_mem_copy (roam_offload_ese->btk, roam_req->BTK, |
| sizeof(roam_req->BTK)); |
| WMITLV_SET_HDR(&roam_offload_ese->tlv_header, |
| WMITLV_TAG_STRUC_wmi_roam_ese_offload_tlv_param, |
| WMITLV_GET_STRUCT_TLVLEN |
| (wmi_roam_ese_offload_tlv_param)); |
| buf_ptr += sizeof(wmi_roam_ese_offload_tlv_param); |
| } else if (auth_mode == WMI_AUTH_FT_RSNA || |
| auth_mode == WMI_AUTH_FT_RSNA_PSK || |
| (auth_mode == WMI_AUTH_OPEN && |
| roam_req->MDID.mdiePresent)){ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, 0); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| sizeof(wmi_roam_11r_offload_tlv_param)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| roam_offload_11r = |
| (wmi_roam_11r_offload_tlv_param *) buf_ptr; |
| roam_offload_11r->r0kh_id_len = roam_req->R0KH_ID_Length; |
| vos_mem_copy (roam_offload_11r->r0kh_id, roam_req->R0KH_ID, |
| roam_offload_11r->r0kh_id_len); |
| vos_mem_copy (roam_offload_11r->psk_msk, roam_req->PSK_PMK, |
| sizeof(roam_req->PSK_PMK)); |
| roam_offload_11r->psk_msk_len = roam_req->pmk_len; |
| roam_offload_11r->mdie_present = roam_req->MDID.mdiePresent; |
| roam_offload_11r->mdid = roam_req->MDID.mobilityDomain; |
| if(auth_mode == WMI_AUTH_OPEN) { |
| /* If FT-Open ensure pmk length |
| and r0khid len are zero */ |
| roam_offload_11r->r0kh_id_len = 0; |
| roam_offload_11r->psk_msk_len = 0; |
| } |
| WMITLV_SET_HDR(&roam_offload_11r->tlv_header, |
| WMITLV_TAG_STRUC_wmi_roam_11r_offload_tlv_param, |
| WMITLV_GET_STRUCT_TLVLEN |
| (wmi_roam_11r_offload_tlv_param)); |
| buf_ptr += sizeof(wmi_roam_11r_offload_tlv_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| WMITLV_GET_STRUCT_TLVLEN(0)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| } else { |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| sizeof(wmi_roam_11i_offload_tlv_param)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| roam_offload_11i = |
| (wmi_roam_11i_offload_tlv_param *) buf_ptr; |
| if (roam_req->RoamKeyMgmtOffloadEnabled) { |
| WMI_SET_ROAM_OFFLOAD_OKC_ENABLED( |
| roam_offload_11i->flags); |
| WMA_LOGE("LFR3:OKC Enabled"); |
| } else { |
| WMI_SET_ROAM_OFFLOAD_OKC_DISABLED( |
| roam_offload_11i->flags); |
| WMA_LOGE("LFR3:OKC Disabled"); |
| } |
| |
| |
| vos_mem_copy (roam_offload_11i->pmk, roam_req->PSK_PMK, |
| sizeof(roam_req->PSK_PMK)); |
| roam_offload_11i->pmk_len = roam_req->pmk_len; |
| WMITLV_SET_HDR(&roam_offload_11i->tlv_header, |
| WMITLV_TAG_STRUC_wmi_roam_11i_offload_tlv_param, |
| WMITLV_GET_STRUCT_TLVLEN |
| (wmi_roam_11i_offload_tlv_param) ); |
| buf_ptr += sizeof(wmi_roam_11i_offload_tlv_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC,0); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC,0); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| } |
| } else { |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| WMITLV_GET_STRUCT_TLVLEN(0)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| WMITLV_GET_STRUCT_TLVLEN(0)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| WMITLV_GET_STRUCT_TLVLEN(0)); |
| } |
| } else { |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| WMITLV_GET_STRUCT_TLVLEN(0)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| WMITLV_GET_STRUCT_TLVLEN(0)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| WMITLV_GET_STRUCT_TLVLEN(0)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| WMITLV_GET_STRUCT_TLVLEN(0)); |
| } |
| #endif |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_ROAM_SCAN_MODE); |
| if (status != EOK) { |
| WMA_LOGE |
| ("wmi_unified_cmd_send WMI_ROAM_SCAN_MODE returned Error %d", |
| status); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| WMA_LOGI("%s: WMA --> WMI_ROAM_SCAN_MODE", __func__); |
| return VOS_STATUS_SUCCESS; |
| error: |
| wmi_buf_free(buf); |
| |
| return vos_status; |
| } |
| |
| /* function : wma_roam_scan_offload_rssi_threshold |
| * Description : Send WMI_ROAM_SCAN_RSSI_THRESHOLD TLV to firmware |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_roam_scan_offload_rssi_thresh(tp_wma_handle wma_handle, |
| tSirRoamOffloadScanReq *roam_req) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_buf_t buf = NULL; |
| int status = 0; |
| int len, rssi_thresh, rssi_thresh_diff; |
| u_int8_t *buf_ptr; |
| wmi_roam_scan_rssi_threshold_fixed_param *rssi_threshold_fp; |
| wmi_roam_scan_extended_threshold_param *ext_thresholds = NULL; |
| struct roam_ext_params *roam_params; |
| uint32_t hirssi_scan_max_count; |
| uint32_t hirssi_scan_delta; |
| int32_t hirssi_upper_bound; |
| int32_t good_rssi_threshold; |
| |
| /* Send rssi threshold */ |
| roam_params = &roam_req->roam_params; |
| rssi_thresh = roam_req->LookupThreshold - WMA_NOISE_FLOOR_DBM_DEFAULT; |
| rssi_thresh_diff = roam_req->OpportunisticScanThresholdDiff; |
| hirssi_scan_max_count = roam_req->hi_rssi_scan_max_count; |
| hirssi_scan_delta = roam_req->hi_rssi_scan_rssi_delta; |
| hirssi_upper_bound = roam_req->hi_rssi_scan_rssi_ub - |
| WMA_NOISE_FLOOR_DBM_DEFAULT; |
| len = sizeof(wmi_roam_scan_rssi_threshold_fixed_param); |
| len += WMI_TLV_HDR_SIZE; /* TLV for ext_thresholds*/ |
| len += sizeof(wmi_roam_scan_extended_threshold_param); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| rssi_threshold_fp = (wmi_roam_scan_rssi_threshold_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&rssi_threshold_fp->tlv_header, |
| WMITLV_TAG_STRUC_wmi_roam_scan_rssi_threshold_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_roam_scan_rssi_threshold_fixed_param)); |
| /* fill in threshold values */ |
| rssi_threshold_fp->vdev_id = roam_req->sessionId; |
| rssi_threshold_fp->roam_scan_rssi_thresh = rssi_thresh & 0x000000ff; |
| rssi_threshold_fp->roam_rssi_thresh_diff = rssi_thresh_diff & 0x000000ff; |
| rssi_threshold_fp->hirssi_scan_max_count = hirssi_scan_max_count; |
| rssi_threshold_fp->hirssi_scan_delta = hirssi_scan_delta; |
| rssi_threshold_fp->hirssi_upper_bound = hirssi_upper_bound & 0x00000ff; |
| |
| buf_ptr += sizeof(wmi_roam_scan_rssi_threshold_fixed_param); |
| WMITLV_SET_HDR(buf_ptr, |
| WMITLV_TAG_ARRAY_STRUC, |
| sizeof(wmi_roam_scan_extended_threshold_param)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| ext_thresholds = (wmi_roam_scan_extended_threshold_param *) buf_ptr; |
| /* The current Noise floor in firmware is -96dBm. Penalty/Boost threshold is |
| * applied on a weaker signal to make it even more weaker. So, there |
| * is a chance that the user may configure a very low Penalty/Boost |
| * threshold beyond the noise floor. If that is the case, then suppress |
| * the penalty/boost threshold to the noise floor. |
| */ |
| if (roam_params->raise_rssi_thresh_5g < WMA_NOISE_FLOOR_DBM_DEFAULT) |
| ext_thresholds->penalty_threshold_5g = 0; |
| else |
| ext_thresholds->boost_threshold_5g = |
| (roam_params->raise_rssi_thresh_5g - WMA_NOISE_FLOOR_DBM_DEFAULT) & |
| 0x000000ff; |
| if (roam_params->drop_rssi_thresh_5g < WMA_NOISE_FLOOR_DBM_DEFAULT) |
| ext_thresholds->penalty_threshold_5g = 0; |
| else |
| ext_thresholds->penalty_threshold_5g = |
| (roam_params->drop_rssi_thresh_5g - WMA_NOISE_FLOOR_DBM_DEFAULT) & |
| 0x000000ff; |
| ext_thresholds->boost_algorithm_5g = WMI_ROAM_5G_BOOST_PENALIZE_ALGO_LINEAR; |
| ext_thresholds->boost_factor_5g = roam_params->raise_factor_5g; |
| ext_thresholds->penalty_algorithm_5g = |
| WMI_ROAM_5G_BOOST_PENALIZE_ALGO_LINEAR; |
| ext_thresholds->penalty_factor_5g = roam_params->drop_factor_5g; |
| ext_thresholds->max_boost_5g = roam_params->max_raise_rssi_5g; |
| ext_thresholds->max_penalty_5g = roam_params->max_drop_rssi_5g; |
| if (roam_params->good_rssi_roam) |
| good_rssi_threshold = WMA_NOISE_FLOOR_DBM_DEFAULT; |
| else |
| good_rssi_threshold = 0; |
| ext_thresholds->good_rssi_threshold = |
| (good_rssi_threshold - WMA_NOISE_FLOOR_DBM_DEFAULT) & 0x000000ff; |
| WMA_LOGD("WMA --> good_rssi_threshold=%d", |
| ext_thresholds->good_rssi_threshold); |
| WMITLV_SET_HDR(&ext_thresholds->tlv_header, |
| WMITLV_TAG_STRUC_wmi_roam_scan_extended_threshold_param, |
| WMITLV_GET_STRUCT_TLVLEN |
| (wmi_roam_scan_extended_threshold_param)); |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_ROAM_SCAN_RSSI_THRESHOLD); |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send WMI_ROAM_SCAN_RSSI_THRESHOLD returned Error %d", |
| status); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| WMA_LOGI( |
| "%s: WMA --> WMI_ROAM_SCAN_RSSI_THRESHOLD roam_scan_rssi_thresh=%d, roam_rssi_thresh_diff=%d", |
| __func__, rssi_thresh, rssi_thresh_diff); |
| WMA_LOGI( |
| "%s: WMA --> WMI_ROAM_SCAN_RSSI_THRESHOLD hirssi_scan max_count=%d, delta=%d", |
| __func__, hirssi_scan_max_count, hirssi_scan_delta); |
| WMA_LOGI( |
| "%s: WMA --> WMI_ROAM_SCAN_RSSI_THRESHOLD hirssi_upper_bound=%d", |
| __func__, hirssi_upper_bound); |
| return VOS_STATUS_SUCCESS; |
| error: |
| wmi_buf_free(buf); |
| |
| return vos_status; |
| } |
| |
| /* function : wma_roam_scan_offload_scan_period |
| * Description : Send WMI_ROAM_SCAN_PERIOD TLV to firmware |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_roam_scan_offload_scan_period(tp_wma_handle wma_handle, |
| A_UINT32 scan_period, |
| A_UINT32 scan_age, |
| u_int32_t vdev_id) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_buf_t buf = NULL; |
| int status = 0; |
| int len; |
| u_int8_t *buf_ptr; |
| wmi_roam_scan_period_fixed_param *scan_period_fp; |
| |
| /* Send scan period values */ |
| len = sizeof(wmi_roam_scan_period_fixed_param); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| scan_period_fp = (wmi_roam_scan_period_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&scan_period_fp->tlv_header, |
| WMITLV_TAG_STRUC_wmi_roam_scan_period_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_roam_scan_period_fixed_param)); |
| /* fill in scan period values */ |
| scan_period_fp->vdev_id = vdev_id; |
| scan_period_fp->roam_scan_period = scan_period; /* 20 seconds */ |
| scan_period_fp->roam_scan_age = scan_age; |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_ROAM_SCAN_PERIOD); |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send WMI_ROAM_SCAN_PERIOD returned Error %d", |
| status); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| WMA_LOGI("%s: WMA --> WMI_ROAM_SCAN_PERIOD roam_scan_period=%d, roam_scan_age=%d", |
| __func__, scan_period, scan_age); |
| return VOS_STATUS_SUCCESS; |
| error: |
| wmi_buf_free(buf); |
| |
| return vos_status; |
| } |
| /* function : wma_roam_scan_offload_rssi_change |
| * Description : Send WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD TLV to firmware |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_roam_scan_offload_rssi_change(tp_wma_handle wma_handle, |
| u_int32_t vdev_id, |
| A_INT32 rssi_change_thresh, |
| A_UINT32 bcn_rssi_weight, |
| A_UINT32 hirssi_delay_btw_scans) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_buf_t buf = NULL; |
| int status = 0; |
| int len; |
| u_int8_t *buf_ptr; |
| wmi_roam_scan_rssi_change_threshold_fixed_param *rssi_change_fp; |
| |
| /* Send rssi change parameters */ |
| len = sizeof(wmi_roam_scan_rssi_change_threshold_fixed_param); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| rssi_change_fp = (wmi_roam_scan_rssi_change_threshold_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&rssi_change_fp->tlv_header, |
| WMITLV_TAG_STRUC_wmi_roam_scan_rssi_change_threshold_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_roam_scan_rssi_change_threshold_fixed_param)); |
| /* fill in rssi change threshold (hysteresis) values */ |
| rssi_change_fp->vdev_id = vdev_id; |
| rssi_change_fp->roam_scan_rssi_change_thresh = rssi_change_thresh; |
| rssi_change_fp->bcn_rssi_weight = bcn_rssi_weight; |
| rssi_change_fp->hirssi_delay_btw_scans = hirssi_delay_btw_scans; |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD); |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD returned Error %d", |
| status); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| WMA_LOGI("%s: WMA --> WMI_ROAM_SCAN_RSSI_CHANGE_THERSHOLD roam_scan_rssi_change_thresh=%d, bcn_rssi_weight=%d", |
| __func__, rssi_change_thresh, bcn_rssi_weight); |
| WMA_LOGI("%s: WMA --> WMI_ROAM_SCAN_RSSI_CHANGE_THERSHOLD hirssi_delay_btw_scans=%d", |
| __func__, hirssi_delay_btw_scans); |
| return VOS_STATUS_SUCCESS; |
| error: |
| wmi_buf_free(buf); |
| |
| return vos_status; |
| } |
| |
| /* function : wma_roam_scan_offload_chan_list |
| * Description : Send WMI_ROAM_CHAN_LIST TLV to firmware |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_roam_scan_offload_chan_list(tp_wma_handle wma_handle, |
| u_int8_t chan_count, |
| u_int8_t *chan_list, |
| u_int8_t list_type, |
| u_int32_t vdev_id) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_buf_t buf = NULL; |
| int status = 0; |
| int len, list_tlv_len; |
| int i; |
| u_int8_t *buf_ptr; |
| wmi_roam_chan_list_fixed_param *chan_list_fp; |
| A_UINT32 *roam_chan_list_array; |
| |
| if (chan_count == 0) |
| { |
| WMA_LOGD("%s : invalid number of channels %d", __func__, chan_count); |
| return VOS_STATUS_E_EMPTY; |
| } |
| /* Channel list is a table of 2 TLV's */ |
| list_tlv_len = WMI_TLV_HDR_SIZE + chan_count * sizeof(A_UINT32); |
| len = sizeof(wmi_roam_chan_list_fixed_param) + list_tlv_len; |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| chan_list_fp = (wmi_roam_chan_list_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&chan_list_fp->tlv_header, |
| WMITLV_TAG_STRUC_wmi_roam_chan_list_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_roam_chan_list_fixed_param)); |
| chan_list_fp->vdev_id = vdev_id; |
| chan_list_fp->num_chan = chan_count; |
| if (chan_count > 0 && list_type == CHANNEL_LIST_STATIC) { |
| /* external app is controlling channel list */ |
| chan_list_fp->chan_list_type = WMI_ROAM_SCAN_CHAN_LIST_TYPE_STATIC; |
| } else { |
| /* umac supplied occupied channel list in LFR */ |
| chan_list_fp->chan_list_type = WMI_ROAM_SCAN_CHAN_LIST_TYPE_DYNAMIC; |
| } |
| |
| buf_ptr += sizeof(wmi_roam_chan_list_fixed_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_UINT32, |
| (chan_list_fp->num_chan * sizeof(u_int32_t))); |
| roam_chan_list_array = (A_UINT32 *)(buf_ptr + WMI_TLV_HDR_SIZE); |
| WMA_LOGI("%s: %d channels = ", __func__, chan_list_fp->num_chan); |
| for (i = 0; ((i < chan_list_fp->num_chan) && |
| (i < SIR_ROAM_MAX_CHANNELS)); i++) { |
| roam_chan_list_array[i] = vos_chan_to_freq(chan_list[i]); |
| WMA_LOGI("%d,",roam_chan_list_array[i]); |
| } |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_ROAM_CHAN_LIST); |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send WMI_ROAM_CHAN_LIST returned Error %d", |
| status); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| WMA_LOGI("%s: WMA --> WMI_ROAM_SCAN_CHAN_LIST", __func__); |
| return VOS_STATUS_SUCCESS; |
| error: |
| wmi_buf_free(buf); |
| |
| return vos_status; |
| } |
| |
| /* function : eCsrAuthType_to_rsn_authmode |
| * Description : Map CSR's authentication type into RSN auth mode used by firmware |
| * Args : |
| * Returns : |
| */ |
| |
| |
| A_UINT32 eCsrAuthType_to_rsn_authmode (eCsrAuthType authtype, eCsrEncryptionType encr) { |
| switch(authtype) { |
| case eCSR_AUTH_TYPE_OPEN_SYSTEM: |
| return (WMI_AUTH_OPEN); |
| case eCSR_AUTH_TYPE_WPA: |
| return (WMI_AUTH_WPA); |
| case eCSR_AUTH_TYPE_WPA_PSK: |
| return (WMI_AUTH_WPA_PSK); |
| case eCSR_AUTH_TYPE_RSN: |
| return (WMI_AUTH_RSNA); |
| case eCSR_AUTH_TYPE_RSN_PSK: |
| return (WMI_AUTH_RSNA_PSK); |
| #if defined WLAN_FEATURE_VOWIFI_11R |
| case eCSR_AUTH_TYPE_FT_RSN: |
| return (WMI_AUTH_FT_RSNA); |
| case eCSR_AUTH_TYPE_FT_RSN_PSK: |
| return (WMI_AUTH_FT_RSNA_PSK); |
| #endif |
| #ifdef FEATURE_WLAN_WAPI |
| case eCSR_AUTH_TYPE_WAPI_WAI_CERTIFICATE: |
| return (WMI_AUTH_WAPI); |
| case eCSR_AUTH_TYPE_WAPI_WAI_PSK: |
| return(WMI_AUTH_WAPI_PSK); |
| #endif |
| #ifdef FEATURE_WLAN_ESE |
| case eCSR_AUTH_TYPE_CCKM_WPA: |
| case eCSR_AUTH_TYPE_CCKM_RSN: |
| return (WMI_AUTH_CCKM); |
| #endif |
| #ifdef WLAN_FEATURE_11W |
| case eCSR_AUTH_TYPE_RSN_PSK_SHA256: |
| return (WMI_AUTH_RSNA_PSK_SHA256); |
| case eCSR_AUTH_TYPE_RSN_8021X_SHA256: |
| return (WMI_AUTH_RSNA_8021X_SHA256); |
| #endif |
| case eCSR_AUTH_TYPE_NONE: |
| case eCSR_AUTH_TYPE_AUTOSWITCH: |
| /* In case of WEP and other keys, NONE means OPEN auth */ |
| if (encr == eCSR_ENCRYPT_TYPE_WEP40_STATICKEY || |
| encr == eCSR_ENCRYPT_TYPE_WEP104_STATICKEY || |
| encr == eCSR_ENCRYPT_TYPE_WEP40 || |
| encr == eCSR_ENCRYPT_TYPE_WEP104 || |
| encr == eCSR_ENCRYPT_TYPE_TKIP || |
| encr == eCSR_ENCRYPT_TYPE_AES) { |
| return (WMI_AUTH_OPEN); |
| } |
| return(WMI_AUTH_NONE); |
| default: |
| return(WMI_AUTH_NONE); |
| } |
| } |
| |
| /* function : eCsrEncryptionType_to_rsn_cipherset |
| * Description : Map CSR's encryption type into RSN cipher types used by firmware |
| * Args : |
| * Returns : |
| */ |
| |
| A_UINT32 eCsrEncryptionType_to_rsn_cipherset (eCsrEncryptionType encr) { |
| |
| switch (encr) { |
| case eCSR_ENCRYPT_TYPE_WEP40_STATICKEY: |
| case eCSR_ENCRYPT_TYPE_WEP104_STATICKEY: |
| case eCSR_ENCRYPT_TYPE_WEP40: |
| case eCSR_ENCRYPT_TYPE_WEP104: |
| return (WMI_CIPHER_WEP); |
| case eCSR_ENCRYPT_TYPE_TKIP: |
| return (WMI_CIPHER_TKIP); |
| case eCSR_ENCRYPT_TYPE_AES: |
| return (WMI_CIPHER_AES_CCM); |
| #ifdef FEATURE_WLAN_WAPI |
| case eCSR_ENCRYPT_TYPE_WPI: |
| return (WMI_CIPHER_WAPI); |
| #endif /* FEATURE_WLAN_WAPI */ |
| case eCSR_ENCRYPT_TYPE_ANY: |
| return (WMI_CIPHER_ANY); |
| case eCSR_ENCRYPT_TYPE_NONE: |
| default: |
| return (WMI_CIPHER_NONE); |
| } |
| } |
| |
| /* function : wma_roam_scan_fill_ap_profile |
| * Description : Fill ap_profile structure from configured parameters |
| * Args : |
| * Returns : |
| */ |
| v_VOID_t wma_roam_scan_fill_ap_profile(tp_wma_handle wma_handle, tpAniSirGlobal pMac, |
| tSirRoamOffloadScanReq *roam_req, wmi_ap_profile *ap_profile_p) |
| { |
| vos_mem_zero(ap_profile_p, sizeof(wmi_ap_profile)); |
| if (roam_req == NULL) { |
| ap_profile_p->ssid.ssid_len = 0; |
| ap_profile_p->ssid.ssid[0] = 0; |
| ap_profile_p->rsn_authmode = WMI_AUTH_NONE; |
| ap_profile_p->rsn_ucastcipherset = WMI_CIPHER_NONE; |
| ap_profile_p->rsn_mcastcipherset = WMI_CIPHER_NONE; |
| ap_profile_p->rsn_mcastmgmtcipherset = WMI_CIPHER_NONE; |
| ap_profile_p->rssi_threshold = WMA_ROAM_RSSI_DIFF_DEFAULT; |
| } else { |
| ap_profile_p->ssid.ssid_len = roam_req->ConnectedNetwork.ssId.length; |
| vos_mem_copy(ap_profile_p->ssid.ssid, roam_req->ConnectedNetwork.ssId.ssId, |
| ap_profile_p->ssid.ssid_len); |
| ap_profile_p->rsn_authmode = |
| eCsrAuthType_to_rsn_authmode(roam_req->ConnectedNetwork.authentication, |
| roam_req->ConnectedNetwork.encryption); |
| ap_profile_p->rsn_ucastcipherset = |
| eCsrEncryptionType_to_rsn_cipherset(roam_req->ConnectedNetwork.encryption); |
| ap_profile_p->rsn_mcastcipherset = |
| eCsrEncryptionType_to_rsn_cipherset(roam_req->ConnectedNetwork.mcencryption); |
| ap_profile_p->rsn_mcastmgmtcipherset = ap_profile_p->rsn_mcastcipherset; |
| ap_profile_p->rssi_threshold = roam_req->RoamRssiDiff; |
| #ifdef WLAN_FEATURE_11W |
| if (roam_req->ConnectedNetwork.MFPEnabled) |
| ap_profile_p->flags |= WMI_AP_PROFILE_FLAG_PMF; |
| #endif |
| } |
| } |
| |
| /* function : wma_roam_scan_scan_params |
| * Description : Fill scan_params structure from configured parameters |
| * Args : roam_req pointer = NULL if this routine is called before connect |
| * : It will be non-NULL if called after assoc. |
| * Returns : |
| */ |
| v_VOID_t wma_roam_scan_fill_scan_params(tp_wma_handle wma_handle, |
| tpAniSirGlobal pMac, |
| tSirRoamOffloadScanReq *roam_req, |
| wmi_start_scan_cmd_fixed_param *scan_params) |
| { |
| tANI_U8 channels_per_burst = 0; |
| tANI_U32 val = 0; |
| |
| if (NULL == pMac) { |
| WMA_LOGE("%s: pMac is NULL", __func__); |
| return; |
| } |
| |
| vos_mem_zero(scan_params, sizeof(wmi_start_scan_cmd_fixed_param)); |
| scan_params->scan_ctrl_flags = WMI_SCAN_ADD_CCK_RATES | |
| WMI_SCAN_ADD_OFDM_RATES | |
| WMI_SCAN_ADD_DS_IE_IN_PROBE_REQ; |
| if (roam_req != NULL) { |
| /* Parameters updated after association is complete */ |
| WMA_LOGI("%s: Input parameters: NeighborScanChannelMinTime" |
| " = %d, NeighborScanChannelMaxTime = %d", |
| __func__, |
| roam_req->NeighborScanChannelMinTime, |
| roam_req->NeighborScanChannelMaxTime); |
| WMA_LOGI("%s: Input parameters: NeighborScanTimerPeriod =" |
| " %d, HomeAwayTime = %d, nProbes = %d", |
| __func__, |
| roam_req->NeighborScanTimerPeriod, |
| roam_req->HomeAwayTime, |
| roam_req->nProbes); |
| |
| /* |
| * roam_req->NeighborScanChannelMaxTime = SCAN_CHANNEL_TIME |
| * roam_req->HomeAwayTime = SCAN_HOME_AWAY_TIME |
| * roam_req->NeighborScanTimerPeriod = SCAN_HOME_TIME |
| * |
| * scan_params->dwell_time_active = time station stays on channel |
| * and sends probes; |
| * scan_params->dwell_time_passive = time station stays on channel |
| * and listens probes; |
| * scan_params->burst_duration = time station goes off channel |
| * to scan; |
| */ |
| |
| if (wlan_cfgGetInt(pMac, WNI_CFG_PASSIVE_MAXIMUM_CHANNEL_TIME, &val) != eSIR_SUCCESS) |
| { |
| /* |
| * Could not get max channel value from CFG. Log error. |
| */ |
| WMA_LOGE("could not retrieve passive max channel value"); |
| |
| /* use a default value of 110ms */ |
| val = WMA_ROAM_DWELL_TIME_PASSIVE_DEFAULT; |
| } |
| |
| scan_params->dwell_time_passive = val; |
| /* |
| * Here is the formula, |
| * T(HomeAway) = N * T(dwell) + (N+1) * T(cs) |
| * where N is number of channels scanned in single burst |
| */ |
| scan_params->dwell_time_active = roam_req->NeighborScanChannelMaxTime; |
| if (roam_req->HomeAwayTime < 2*WMA_ROAM_SCAN_CHANNEL_SWITCH_TIME) { |
| /* clearly we can't follow home away time. |
| * Make it a split scan. |
| */ |
| scan_params->burst_duration = 0; |
| } else { |
| channels_per_burst = |
| (roam_req->HomeAwayTime - WMA_ROAM_SCAN_CHANNEL_SWITCH_TIME) |
| / ( scan_params->dwell_time_active + WMA_ROAM_SCAN_CHANNEL_SWITCH_TIME); |
| |
| if (channels_per_burst < 1) { |
| // dwell time and home away time conflicts |
| // we will override dwell time |
| scan_params->dwell_time_active = |
| roam_req->HomeAwayTime - 2*WMA_ROAM_SCAN_CHANNEL_SWITCH_TIME; |
| scan_params->burst_duration = scan_params->dwell_time_active; |
| } else { |
| scan_params->burst_duration = |
| channels_per_burst * scan_params->dwell_time_active; |
| } |
| } |
| if (roam_req->allowDFSChannelRoam == SIR_ROAMING_DFS_CHANNEL_ENABLED_NORMAL && |
| roam_req->HomeAwayTime > 0 && |
| roam_req->ChannelCacheType != CHANNEL_LIST_STATIC) { |
| /* Roaming on DFS channels is supported and it is not app channel list. |
| * It is ok to override homeAwayTime to accomodate DFS dwell time in burst |
| * duration. |
| */ |
| scan_params->burst_duration = MAX(scan_params->burst_duration, |
| scan_params->dwell_time_passive); |
| } |
| scan_params->min_rest_time = roam_req->NeighborScanTimerPeriod; |
| scan_params->max_rest_time = roam_req->NeighborScanTimerPeriod; |
| scan_params->repeat_probe_time = (roam_req->nProbes > 0) ? |
| VOS_MAX(scan_params->dwell_time_active / roam_req->nProbes, 1) : 0; |
| scan_params->probe_spacing_time = 0; |
| scan_params->probe_delay = 0; |
| scan_params->max_scan_time = WMA_HW_DEF_SCAN_MAX_DURATION; /* 30 seconds for full scan cycle */ |
| scan_params->idle_time = scan_params->min_rest_time; |
| scan_params->n_probes = roam_req->nProbes; |
| if (roam_req->allowDFSChannelRoam == SIR_ROAMING_DFS_CHANNEL_DISABLED) { |
| scan_params->scan_ctrl_flags |= WMI_SCAN_BYPASS_DFS_CHN; |
| } else { |
| /* Roaming scan on DFS channel is allowed. |
| * No need to change any flags for default allowDFSChannelRoam = 1. |
| * Special case where static channel list is given by application |
| * that contains DFS channels. Assume that the application |
| * has knowledge of matching APs being active and that |
| * probe request transmission is permitted on those channel. |
| * Force active scans on those channels. |
| */ |
| |
| if (roam_req->allowDFSChannelRoam == |
| SIR_ROAMING_DFS_CHANNEL_ENABLED_ACTIVE && |
| roam_req->ChannelCacheType == CHANNEL_LIST_STATIC && |
| roam_req->ConnectedNetwork.ChannelCount > 0) { |
| scan_params->scan_ctrl_flags |= |
| WMI_SCAN_FLAG_FORCE_ACTIVE_ON_DFS; |
| } |
| } |
| } else { |
| /* roam_req = NULL during initial or pre-assoc invocation */ |
| scan_params->dwell_time_active = WMA_ROAM_DWELL_TIME_ACTIVE_DEFAULT; |
| scan_params->dwell_time_passive = WMA_ROAM_DWELL_TIME_PASSIVE_DEFAULT; |
| scan_params->min_rest_time = WMA_ROAM_MIN_REST_TIME_DEFAULT; |
| scan_params->max_rest_time = WMA_ROAM_MAX_REST_TIME_DEFAULT; |
| scan_params->repeat_probe_time = 0; |
| scan_params->probe_spacing_time = 0; |
| scan_params->probe_delay = 0; |
| scan_params->max_scan_time = WMA_HW_DEF_SCAN_MAX_DURATION; |
| scan_params->idle_time = scan_params->min_rest_time; |
| scan_params->burst_duration = 0; |
| scan_params->n_probes = 0; |
| } |
| |
| WMA_LOGI("%s: Rome roam scan parameters:" |
| " dwell_time_active = %d, dwell_time_passive = %d", |
| __func__, |
| scan_params->dwell_time_active, |
| scan_params->dwell_time_passive); |
| WMA_LOGI("%s: min_rest_time = %d, max_rest_time = %d," |
| " repeat_probe_time = %d n_probes = %d", |
| __func__, |
| scan_params->min_rest_time, |
| scan_params->max_rest_time, |
| scan_params->repeat_probe_time, |
| scan_params->n_probes); |
| WMA_LOGI("%s: max_scan_time = %d, idle_time = %d," |
| " burst_duration = %d, scan_ctrl_flags = 0x%x", |
| __func__, |
| scan_params->max_scan_time, |
| scan_params->idle_time, |
| scan_params->burst_duration, |
| scan_params->scan_ctrl_flags); |
| } |
| |
| /* function : wma_roam_scan_offload_ap_profile |
| * Description : Send WMI_ROAM_AP_PROFILE TLV to firmware |
| * Args : AP profile parameters are passed in as the structure used in TLV |
| * Returns : |
| */ |
| VOS_STATUS wma_roam_scan_offload_ap_profile(tp_wma_handle wma_handle, |
| wmi_ap_profile *ap_profile_p, |
| u_int32_t vdev_id) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_buf_t buf = NULL; |
| int status = 0; |
| int len; |
| u_int8_t *buf_ptr; |
| wmi_roam_ap_profile_fixed_param *roam_ap_profile_fp; |
| |
| len = sizeof(wmi_roam_ap_profile_fixed_param) + |
| sizeof(wmi_ap_profile); |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| roam_ap_profile_fp = (wmi_roam_ap_profile_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&roam_ap_profile_fp->tlv_header, |
| WMITLV_TAG_STRUC_wmi_roam_ap_profile_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_roam_ap_profile_fixed_param)); |
| /* fill in threshold values */ |
| roam_ap_profile_fp->vdev_id = vdev_id; |
| roam_ap_profile_fp->id = 0; |
| buf_ptr += sizeof(wmi_roam_ap_profile_fixed_param); |
| |
| vos_mem_copy(buf_ptr, ap_profile_p, sizeof(wmi_ap_profile)); |
| WMITLV_SET_HDR(buf_ptr, |
| WMITLV_TAG_STRUC_wmi_ap_profile, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_ap_profile)); |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_ROAM_AP_PROFILE); |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send WMI_ROAM_AP_PROFILE returned Error %d", |
| status); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| WMA_LOGI("WMA --> WMI_ROAM_AP_PROFILE and other parameters"); |
| return VOS_STATUS_SUCCESS; |
| error: |
| wmi_buf_free(buf); |
| |
| return vos_status; |
| } |
| |
| VOS_STATUS wma_roam_scan_filter(tp_wma_handle wma_handle, |
| tSirRoamOffloadScanReq *roam_req) |
| { |
| wmi_buf_t buf = NULL; |
| int status = 0, i; |
| uint32_t len, num_bssid_black_list = 0, num_ssid_white_list = 0, |
| num_bssid_preferred_list = 0; |
| uint32_t op_bitmap = 0; |
| uint8_t *buf_ptr; |
| wmi_roam_filter_fixed_param *roam_filter; |
| uint8_t *bssid_src_ptr = NULL; |
| wmi_mac_addr *bssid_dst_ptr = NULL; |
| wmi_ssid *ssid_ptr = NULL; |
| uint32_t *bssid_preferred_factor_ptr = NULL; |
| struct roam_ext_params *roam_params; |
| |
| roam_params = &roam_req->roam_params; |
| len = sizeof(wmi_roam_filter_fixed_param); |
| len += WMI_TLV_HDR_SIZE; |
| if (roam_req->Command != ROAM_SCAN_OFFLOAD_STOP) { |
| switch (roam_req->reason) { |
| case REASON_ROAM_SET_BLACKLIST_BSSID: |
| op_bitmap |= 0x1; |
| num_bssid_black_list = roam_params->num_bssid_avoid_list; |
| len += num_bssid_black_list * sizeof(wmi_mac_addr); |
| len += WMI_TLV_HDR_SIZE; |
| break; |
| case REASON_ROAM_SET_SSID_ALLOWED: |
| op_bitmap |= 0x2; |
| num_ssid_white_list = roam_params->num_ssid_allowed_list; |
| len += num_ssid_white_list * sizeof(wmi_ssid); |
| len += WMI_TLV_HDR_SIZE; |
| break; |
| case REASON_ROAM_SET_FAVORED_BSSID: |
| op_bitmap |= 0x4; |
| num_bssid_preferred_list = roam_params->num_bssid_favored; |
| len += num_bssid_preferred_list * sizeof(wmi_mac_addr); |
| len += WMI_TLV_HDR_SIZE; |
| len += num_bssid_preferred_list * sizeof(A_UINT32); |
| break; |
| default: |
| WMA_LOGD("%s : Roam Filter need not be sent", __func__); |
| return VOS_STATUS_SUCCESS; |
| break; |
| } |
| } else { |
| /* In case of STOP command, reset all the variables |
| * except for blacklist BSSID which should be retained |
| * across connections.*/ |
| op_bitmap = 0x2 | 0x4; |
| num_ssid_white_list = roam_params->num_ssid_allowed_list; |
| len += num_ssid_white_list * sizeof(wmi_ssid); |
| num_bssid_preferred_list = roam_params->num_bssid_favored; |
| len += num_bssid_preferred_list * sizeof(wmi_mac_addr); |
| len += num_bssid_preferred_list * sizeof(A_UINT32); |
| len += (2 * WMI_TLV_HDR_SIZE); |
| } |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| roam_filter = (wmi_roam_filter_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&roam_filter->tlv_header, |
| WMITLV_TAG_STRUC_wmi_roam_filter_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_roam_filter_fixed_param)); |
| /* fill in fixed values */ |
| roam_filter->vdev_id = roam_req->sessionId; |
| roam_filter->flags = 0; |
| roam_filter->op_bitmap = op_bitmap; |
| roam_filter->num_bssid_black_list = num_bssid_black_list; |
| roam_filter->num_ssid_white_list = num_ssid_white_list; |
| roam_filter->num_bssid_preferred_list = num_bssid_preferred_list; |
| buf_ptr += sizeof(wmi_roam_filter_fixed_param); |
| |
| WMITLV_SET_HDR((buf_ptr), |
| WMITLV_TAG_ARRAY_FIXED_STRUC, |
| (num_bssid_black_list * sizeof(wmi_mac_addr))); |
| bssid_src_ptr = (uint8_t *)&roam_params->bssid_avoid_list; |
| bssid_dst_ptr = (wmi_mac_addr *)(buf_ptr + WMI_TLV_HDR_SIZE); |
| for(i=0; i<num_bssid_black_list; i++) { |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(bssid_src_ptr, bssid_dst_ptr); |
| bssid_src_ptr += ATH_MAC_LEN; |
| bssid_dst_ptr++; |
| } |
| buf_ptr += WMI_TLV_HDR_SIZE + (num_bssid_black_list * sizeof(wmi_mac_addr)); |
| WMITLV_SET_HDR((buf_ptr), |
| WMITLV_TAG_ARRAY_FIXED_STRUC, |
| (num_ssid_white_list * sizeof(wmi_ssid))); |
| ssid_ptr = (wmi_ssid *)(buf_ptr + WMI_TLV_HDR_SIZE); |
| for(i=0; i<num_ssid_white_list; i++) { |
| memcpy(&ssid_ptr->ssid, &roam_params->ssid_allowed_list[i].ssId, |
| roam_params->ssid_allowed_list[i].length); |
| ssid_ptr->ssid_len = roam_params->ssid_allowed_list[i].length; |
| WMA_LOGD("%s: Passing SSID of length=%d", __func__,ssid_ptr->ssid_len); |
| VOS_TRACE_HEX_DUMP(VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_DEBUG, |
| (uint8_t *)ssid_ptr->ssid, |
| ssid_ptr->ssid_len); |
| ssid_ptr++; |
| } |
| buf_ptr += WMI_TLV_HDR_SIZE + (num_ssid_white_list * sizeof(wmi_ssid)); |
| WMITLV_SET_HDR((buf_ptr), |
| WMITLV_TAG_ARRAY_FIXED_STRUC, |
| (num_bssid_preferred_list * sizeof(wmi_mac_addr))); |
| bssid_src_ptr = (uint8_t *)&roam_params->bssid_favored; |
| bssid_dst_ptr = (wmi_mac_addr *)(buf_ptr + WMI_TLV_HDR_SIZE); |
| for(i=0; i<num_bssid_preferred_list; i++) { |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(bssid_src_ptr, |
| (wmi_mac_addr *)bssid_dst_ptr); |
| bssid_src_ptr += ATH_MAC_LEN; |
| bssid_dst_ptr++; |
| } |
| buf_ptr += WMI_TLV_HDR_SIZE + |
| (num_bssid_preferred_list * sizeof(wmi_mac_addr)); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_UINT32, |
| (num_bssid_preferred_list * sizeof(uint32_t))); |
| bssid_preferred_factor_ptr = (uint32_t *)(buf_ptr + WMI_TLV_HDR_SIZE); |
| for (i=0; i<num_bssid_preferred_list; i++) { |
| *bssid_preferred_factor_ptr = roam_params->bssid_favored_factor[i]; |
| bssid_preferred_factor_ptr++; |
| } |
| buf_ptr += WMI_TLV_HDR_SIZE + (num_bssid_preferred_list * sizeof(uint32_t)); |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_ROAM_FILTER_CMDID); |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send WMI_ROAM_FILTER_CMDID returned Error %d", |
| status); |
| goto error; |
| } |
| return VOS_STATUS_SUCCESS; |
| error: |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| VOS_STATUS wma_roam_scan_offload_command(tp_wma_handle wma_handle, |
| u_int32_t command, |
| u_int32_t vdev_id) |
| { |
| VOS_STATUS vos_status; |
| wmi_roam_scan_cmd_fixed_param *cmd_fp; |
| wmi_buf_t buf = NULL; |
| int status = 0; |
| int len; |
| u_int8_t *buf_ptr; |
| |
| len = sizeof(wmi_roam_scan_cmd_fixed_param); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| |
| cmd_fp = (wmi_roam_scan_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd_fp->tlv_header, |
| WMITLV_TAG_STRUC_wmi_roam_scan_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_roam_scan_cmd_fixed_param)); |
| cmd_fp->vdev_id = vdev_id; |
| cmd_fp->command_arg = command; |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_ROAM_SCAN_CMD); |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send WMI_ROAM_SCAN_CMD returned Error %d", |
| status); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| WMA_LOGI("%s: WMA --> WMI_ROAM_SCAN_CMD", __func__); |
| return VOS_STATUS_SUCCESS; |
| |
| error: |
| wmi_buf_free(buf); |
| |
| return vos_status; |
| } |
| |
| /* function : wma_process_roam_scan_req |
| * Description : Main routine to handle ROAM commands coming from CSR module. |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_process_roam_scan_req(tp_wma_handle wma_handle, |
| tSirRoamOffloadScanReq *roam_req) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_start_scan_cmd_fixed_param scan_params; |
| wmi_ap_profile ap_profile; |
| tpAniSirGlobal pMac = (tpAniSirGlobal)vos_get_context(VOS_MODULE_ID_PE, |
| wma_handle->vos_context); |
| u_int32_t mode = 0; |
| struct wma_txrx_node *intr = NULL; |
| |
| WMA_LOGI("%s: command 0x%x, reason %d", __func__, roam_req->Command, |
| roam_req->reason); |
| |
| if (NULL == pMac) |
| { |
| WMA_LOGE("%s: pMac is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| if (!wma_handle->roam_offload_enabled) { |
| /* roam scan offload is not enabled in firmware. |
| * Cannot initialize it in the middle of connection. |
| */ |
| vos_mem_free(roam_req); |
| return VOS_STATUS_E_PERM; |
| } |
| switch (roam_req->Command) { |
| case ROAM_SCAN_OFFLOAD_START: |
| intr = &wma_handle->interfaces[roam_req->sessionId]; |
| intr->delay_before_vdev_stop = roam_req->delay_before_vdev_stop; |
| /* |
| * Scan/Roam threshold parameters are translated from fields of tSirRoamOffloadScanReq |
| * to WMITLV values sent to Rome firmware. |
| * some of these parameters are configurable in qcom_cfg.ini file. |
| */ |
| |
| /* First parameter is positive rssi value to trigger rssi based scan. |
| * Opportunistic scan is started at 30 dB higher that trigger rssi. |
| */ |
| wma_handle->suitable_ap_hb_failure = FALSE; |
| |
| vos_status = wma_roam_scan_offload_rssi_thresh(wma_handle, |
| roam_req); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| break; |
| } |
| vos_status = wma_roam_scan_bmiss_cnt(wma_handle, |
| roam_req->RoamBmissFirstBcnt, roam_req->RoamBmissFinalBcnt, |
| roam_req->sessionId); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| break; |
| } |
| |
| /* Opportunistic scan runs on a timer, value set by EmptyRefreshScanPeriod. |
| * Age out the entries after 3 such cycles. |
| */ |
| if (roam_req->EmptyRefreshScanPeriod > 0) { |
| vos_status = wma_roam_scan_offload_scan_period(wma_handle, |
| roam_req->EmptyRefreshScanPeriod, |
| roam_req->EmptyRefreshScanPeriod * 3, |
| roam_req->sessionId); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| break; |
| } |
| mode = WMI_ROAM_SCAN_MODE_PERIODIC; |
| /* Don't use rssi triggered roam scans if external app |
| * is in control of channel list. |
| */ |
| if (roam_req->ChannelCacheType != CHANNEL_LIST_STATIC) { |
| mode |= WMI_ROAM_SCAN_MODE_RSSI_CHANGE; |
| } |
| } else { |
| mode = WMI_ROAM_SCAN_MODE_RSSI_CHANGE; |
| } |
| |
| /* Start new rssi triggered scan only if it changes by RoamRssiDiff value. |
| * Beacon weight of 14 means average rssi is taken over 14 previous samples + |
| * 2 times the current beacon's rssi. |
| */ |
| vos_status = wma_roam_scan_offload_rssi_change(wma_handle, |
| roam_req->sessionId, |
| roam_req->RoamRescanRssiDiff, |
| roam_req->RoamBeaconRssiWeight, |
| roam_req->hi_rssi_scan_delay); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| break; |
| } |
| wma_roam_scan_fill_ap_profile(wma_handle, pMac, roam_req, &ap_profile); |
| |
| vos_status = wma_roam_scan_offload_ap_profile(wma_handle, |
| &ap_profile, |
| roam_req->sessionId); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| break; |
| } |
| vos_status = wma_roam_scan_offload_chan_list(wma_handle, |
| roam_req->ConnectedNetwork.ChannelCount, |
| &roam_req->ConnectedNetwork.ChannelCache[0], |
| roam_req->ChannelCacheType, |
| roam_req->sessionId); |
| if ((vos_status != VOS_STATUS_SUCCESS) && |
| (vos_status != VOS_STATUS_E_EMPTY)) { |
| break; |
| } |
| |
| |
| wma_roam_scan_fill_scan_params(wma_handle, pMac, roam_req, &scan_params); |
| vos_status = wma_roam_scan_offload_mode(wma_handle, |
| &scan_params, |
| roam_req, |
| mode, |
| roam_req->sessionId); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| break; |
| } |
| vos_status = wma_roam_scan_filter(wma_handle, roam_req); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Sending start for roam scan filter failed"); |
| break; |
| } |
| break; |
| |
| case ROAM_SCAN_OFFLOAD_STOP: |
| wma_handle->suitable_ap_hb_failure = FALSE; |
| if (wma_handle->roam_offload_enabled) { |
| |
| wma_roam_scan_fill_scan_params(wma_handle, pMac, |
| NULL, &scan_params); |
| vos_status = wma_roam_scan_offload_mode(wma_handle, |
| &scan_params, |
| NULL, |
| WMI_ROAM_SCAN_MODE_NONE, |
| roam_req->sessionId); |
| } |
| /* |
| * If the STOP command is due to a disconnect, then |
| * send the filter command to clear all the filter |
| * entries. If it is roaming scenario, then do not |
| * send the cleared entries. |
| */ |
| if (!roam_req->middle_of_roaming) { |
| vos_status = wma_roam_scan_filter(wma_handle, roam_req); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Sending clear for roam scan filter failed"); |
| break; |
| } |
| } |
| |
| if (roam_req->reason == REASON_OS_REQUESTED_ROAMING_NOW) { |
| vos_msg_t vosMsg; |
| tSirRoamOffloadScanRsp *scan_offload_rsp; |
| scan_offload_rsp = vos_mem_malloc(sizeof(*scan_offload_rsp)); |
| if (!scan_offload_rsp) { |
| WMA_LOGE("%s: Alloc failed for scan_offload_rsp", __func__); |
| vos_mem_free(roam_req); |
| return VOS_STATUS_E_NOMEM; |
| } |
| vosMsg.type = eWNI_SME_ROAM_SCAN_OFFLOAD_RSP; |
| scan_offload_rsp->sessionId = roam_req->sessionId; |
| scan_offload_rsp->reason = roam_req->reason; |
| vosMsg.bodyptr = scan_offload_rsp; |
| /* |
| * Since REASSOC request is processed in Roam_Scan_Offload_Rsp |
| * post a dummy rsp msg back to SME with proper reason code. |
| */ |
| if (VOS_STATUS_SUCCESS != vos_mq_post_message(VOS_MQ_ID_SME, |
| (vos_msg_t*)&vosMsg)) |
| { |
| vos_mem_free(scan_offload_rsp); |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_INFO, |
| "%s: Failed to post Scan Offload Rsp to UMAC", |
| __func__); |
| } |
| } |
| break; |
| |
| case ROAM_SCAN_OFFLOAD_ABORT_SCAN: |
| /* If roam scan is running, stop that cycle. |
| * It will continue automatically on next trigger. |
| */ |
| vos_status = wma_roam_scan_offload_command(wma_handle, |
| WMI_ROAM_SCAN_STOP_CMD, |
| roam_req->sessionId); |
| break; |
| |
| case ROAM_SCAN_OFFLOAD_RESTART: |
| /* Rome offload engine does not stop after any scan. |
| * If this command is sent because all preauth attempts failed |
| * and WMI_ROAM_REASON_SUITABLE_AP event was received earlier, |
| * now it is time to call it heartbeat failure. |
| */ |
| if ((roam_req->reason == REASON_PREAUTH_FAILED_FOR_ALL) |
| && wma_handle->suitable_ap_hb_failure) { |
| WMA_LOGE("%s: Sending heartbeat failure after preauth failures", |
| __func__); |
| wma_beacon_miss_handler(wma_handle, roam_req->sessionId, |
| wma_handle->suitable_ap_hb_failure_rssi); |
| wma_handle->suitable_ap_hb_failure = FALSE; |
| } |
| break; |
| |
| case ROAM_SCAN_OFFLOAD_UPDATE_CFG: |
| wma_handle->suitable_ap_hb_failure = FALSE; |
| wma_roam_scan_fill_scan_params(wma_handle, pMac, roam_req, &scan_params); |
| vos_status = wma_roam_scan_offload_mode(wma_handle, |
| &scan_params, |
| roam_req, |
| WMI_ROAM_SCAN_MODE_NONE, |
| roam_req->sessionId); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| break; |
| } |
| |
| if (roam_req->RoamScanOffloadEnabled == FALSE) { |
| break; |
| } |
| |
| vos_status = wma_roam_scan_bmiss_cnt(wma_handle, |
| roam_req->RoamBmissFirstBcnt, roam_req->RoamBmissFinalBcnt, |
| roam_req->sessionId); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| break; |
| } |
| vos_status = wma_roam_scan_filter(wma_handle, roam_req); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Sending update for roam scan filter failed"); |
| break; |
| } |
| |
| /* |
| * Runtime (after association) changes to rssi thresholds and other parameters. |
| */ |
| vos_status = wma_roam_scan_offload_chan_list(wma_handle, |
| roam_req->ConnectedNetwork.ChannelCount, |
| &roam_req->ConnectedNetwork.ChannelCache[0], |
| roam_req->ChannelCacheType, |
| roam_req->sessionId); |
| /* |
| * Even though the channel list is empty, we can |
| * still go ahead and start Roaming. |
| */ |
| if ((vos_status != VOS_STATUS_SUCCESS) && |
| (vos_status != VOS_STATUS_E_EMPTY)) { |
| break; |
| } |
| |
| vos_status = wma_roam_scan_offload_rssi_thresh(wma_handle, |
| roam_req); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| break; |
| } |
| |
| if (roam_req->EmptyRefreshScanPeriod > 0) { |
| vos_status = wma_roam_scan_offload_scan_period(wma_handle, |
| roam_req->EmptyRefreshScanPeriod, |
| roam_req->EmptyRefreshScanPeriod * 3, |
| roam_req->sessionId); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| break; |
| } |
| mode = WMI_ROAM_SCAN_MODE_PERIODIC; |
| /* Don't use rssi triggered roam scans if external app |
| * is in control of channel list. |
| */ |
| if (roam_req->ChannelCacheType != CHANNEL_LIST_STATIC) { |
| mode |= WMI_ROAM_SCAN_MODE_RSSI_CHANGE; |
| } |
| } else { |
| mode = WMI_ROAM_SCAN_MODE_RSSI_CHANGE; |
| } |
| |
| vos_status = wma_roam_scan_offload_rssi_change(wma_handle, |
| roam_req->sessionId, |
| roam_req->RoamRescanRssiDiff, |
| roam_req->RoamBeaconRssiWeight, |
| roam_req->hi_rssi_scan_delay); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| break; |
| } |
| |
| wma_roam_scan_fill_ap_profile(wma_handle, pMac, roam_req, &ap_profile); |
| vos_status = wma_roam_scan_offload_ap_profile(wma_handle, |
| &ap_profile, |
| roam_req->sessionId); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| break; |
| } |
| |
| wma_roam_scan_fill_scan_params(wma_handle, pMac, roam_req, &scan_params); |
| vos_status = wma_roam_scan_offload_mode( |
| wma_handle, |
| &scan_params, |
| roam_req, |
| mode, |
| roam_req->sessionId); |
| |
| break; |
| |
| default: |
| break; |
| } |
| vos_mem_free(roam_req); |
| return vos_status; |
| } |
| |
| #ifdef FEATURE_WLAN_LPHB |
| /* function : wma_lphb_conf_hbenable |
| * Description : handles the enable command of LPHB configuration requests |
| * Args : wma_handle - WMA handle |
| * lphb_conf_req - configuration info |
| * by_user - whether this call is from user or cached resent |
| * Returns : |
| */ |
| VOS_STATUS wma_lphb_conf_hbenable(tp_wma_handle wma_handle, |
| tSirLPHBReq *lphb_conf_req, |
| v_BOOL_t by_user) |
| |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| int status = 0; |
| tSirLPHBEnableStruct *ts_lphb_enable; |
| wmi_buf_t buf = NULL; |
| u_int8_t *buf_ptr; |
| wmi_hb_set_enable_cmd_fixed_param *hb_enable_fp; |
| int len = sizeof(wmi_hb_set_enable_cmd_fixed_param); |
| int i; |
| |
| if (lphb_conf_req == NULL) |
| { |
| WMA_LOGE("%s : LPHB configuration is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ts_lphb_enable = &(lphb_conf_req->params.lphbEnableReq); |
| WMA_LOGI("%s: WMA --> WMI_HB_SET_ENABLE enable=%d, item=%d, session=%d", |
| __func__, |
| ts_lphb_enable->enable, |
| ts_lphb_enable->item, |
| ts_lphb_enable->session); |
| |
| if ((ts_lphb_enable->item != 1) && (ts_lphb_enable->item != 2)) { |
| WMA_LOGE("%s : LPHB configuration wrong item %d", |
| __func__, |
| ts_lphb_enable->item); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| hb_enable_fp = (wmi_hb_set_enable_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&hb_enable_fp->tlv_header, |
| WMITLV_TAG_STRUC_wmi_hb_set_enable_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_hb_set_enable_cmd_fixed_param)); |
| |
| /* fill in values */ |
| hb_enable_fp->vdev_id = ts_lphb_enable->session; |
| hb_enable_fp->enable= ts_lphb_enable->enable; |
| hb_enable_fp->item = ts_lphb_enable->item; |
| hb_enable_fp->session = ts_lphb_enable->session; |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_HB_SET_ENABLE_CMDID); |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send WMI_HB_SET_ENABLE returned Error %d", |
| status); |
| wmi_buf_free(buf); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| if (by_user) { |
| /* target already configured, now cache command status */ |
| if (ts_lphb_enable->enable) { |
| i = ts_lphb_enable->item-1; |
| wma_handle->wow.lphb_cache[i].cmd |
| = LPHB_SET_EN_PARAMS_INDID; |
| wma_handle->wow.lphb_cache[i].params.lphbEnableReq.enable |
| = ts_lphb_enable->enable; |
| wma_handle->wow.lphb_cache[i].params.lphbEnableReq.item |
| = ts_lphb_enable->item; |
| wma_handle->wow.lphb_cache[i].params.lphbEnableReq.session |
| = ts_lphb_enable->session; |
| |
| WMA_LOGI("%s: cached LPHB status in WMA context for item %d", |
| __func__, i); |
| } else { |
| vos_mem_zero((void *)&wma_handle->wow.lphb_cache, |
| sizeof(wma_handle->wow.lphb_cache)); |
| WMA_LOGI("%s: cleared all cached LPHB status in WMA context", |
| __func__); |
| } |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| error: |
| return vos_status; |
| } |
| |
| /* function : wma_lphb_conf_tcp_params |
| * Description : handles the tcp params command of LPHB configuration requests |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_lphb_conf_tcp_params(tp_wma_handle wma_handle, |
| tSirLPHBReq *lphb_conf_req) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| int status = 0; |
| tSirLPHBTcpParamStruct *ts_lphb_tcp_param; |
| wmi_buf_t buf = NULL; |
| u_int8_t *buf_ptr; |
| wmi_hb_set_tcp_params_cmd_fixed_param *hb_tcp_params_fp; |
| int len = sizeof(wmi_hb_set_tcp_params_cmd_fixed_param); |
| |
| if (lphb_conf_req == NULL) |
| { |
| WMA_LOGE("%s : LPHB configuration is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ts_lphb_tcp_param = &(lphb_conf_req->params.lphbTcpParamReq); |
| WMA_LOGI("%s: WMA --> WMI_HB_SET_TCP_PARAMS srv_ip=%08x, dev_ip=%08x, src_port=%d, " |
| "dst_port=%d, timeout=%d, session=%d, gateway_mac=%02x:%02x:%02x:%02x:%02x:%02x, " |
| "timePeriodSec=%d, tcpSn=%d", |
| __func__, |
| ts_lphb_tcp_param->srv_ip, ts_lphb_tcp_param->dev_ip, |
| ts_lphb_tcp_param->src_port, ts_lphb_tcp_param->dst_port, |
| ts_lphb_tcp_param->timeout, ts_lphb_tcp_param->session, |
| ts_lphb_tcp_param->gateway_mac[0], |
| ts_lphb_tcp_param->gateway_mac[1], |
| ts_lphb_tcp_param->gateway_mac[2], |
| ts_lphb_tcp_param->gateway_mac[3], |
| ts_lphb_tcp_param->gateway_mac[4], |
| ts_lphb_tcp_param->gateway_mac[5], |
| ts_lphb_tcp_param->timePeriodSec, ts_lphb_tcp_param->tcpSn); |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| hb_tcp_params_fp = (wmi_hb_set_tcp_params_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&hb_tcp_params_fp->tlv_header, |
| WMITLV_TAG_STRUC_wmi_hb_set_tcp_params_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_hb_set_tcp_params_cmd_fixed_param)); |
| |
| /* fill in values */ |
| hb_tcp_params_fp->vdev_id = ts_lphb_tcp_param->session; |
| hb_tcp_params_fp->srv_ip = ts_lphb_tcp_param->srv_ip; |
| hb_tcp_params_fp->dev_ip = ts_lphb_tcp_param->dev_ip; |
| hb_tcp_params_fp->seq = ts_lphb_tcp_param->tcpSn; |
| hb_tcp_params_fp->src_port = ts_lphb_tcp_param->src_port; |
| hb_tcp_params_fp->dst_port = ts_lphb_tcp_param->dst_port; |
| hb_tcp_params_fp->interval = ts_lphb_tcp_param->timePeriodSec; |
| hb_tcp_params_fp->timeout = ts_lphb_tcp_param->timeout; |
| hb_tcp_params_fp->session = ts_lphb_tcp_param->session; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(ts_lphb_tcp_param->gateway_mac, &hb_tcp_params_fp->gateway_mac); |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_HB_SET_TCP_PARAMS_CMDID); |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send WMI_HB_SET_TCP_PARAMS returned Error %d", |
| status); |
| wmi_buf_free(buf); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| error: |
| return vos_status; |
| } |
| |
| /* function : wma_lphb_conf_tcp_pkt_filter |
| * Description : handles the tcp packet filter command of LPHB configuration requests |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_lphb_conf_tcp_pkt_filter(tp_wma_handle wma_handle, |
| tSirLPHBReq *lphb_conf_req) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| int status = 0; |
| tSirLPHBTcpFilterStruct *ts_lphb_tcp_filter; |
| wmi_buf_t buf = NULL; |
| u_int8_t *buf_ptr; |
| wmi_hb_set_tcp_pkt_filter_cmd_fixed_param *hb_tcp_filter_fp; |
| int len = sizeof(wmi_hb_set_tcp_pkt_filter_cmd_fixed_param); |
| |
| if (lphb_conf_req == NULL) |
| { |
| WMA_LOGE("%s : LPHB configuration is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ts_lphb_tcp_filter = &(lphb_conf_req->params.lphbTcpFilterReq); |
| WMA_LOGI("%s: WMA --> WMI_HB_SET_TCP_PKT_FILTER length=%d, offset=%d, session=%d, " |
| "filter=%2x:%2x:%2x:%2x:%2x:%2x ...", |
| __func__, |
| ts_lphb_tcp_filter->length, |
| ts_lphb_tcp_filter->offset, |
| ts_lphb_tcp_filter->session, |
| ts_lphb_tcp_filter->filter[0], |
| ts_lphb_tcp_filter->filter[1], |
| ts_lphb_tcp_filter->filter[2], |
| ts_lphb_tcp_filter->filter[3], |
| ts_lphb_tcp_filter->filter[4], |
| ts_lphb_tcp_filter->filter[5]); |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| hb_tcp_filter_fp = (wmi_hb_set_tcp_pkt_filter_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&hb_tcp_filter_fp->tlv_header, |
| WMITLV_TAG_STRUC_wmi_hb_set_tcp_pkt_filter_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_hb_set_tcp_pkt_filter_cmd_fixed_param)); |
| |
| /* fill in values */ |
| hb_tcp_filter_fp->vdev_id = ts_lphb_tcp_filter->session; |
| hb_tcp_filter_fp->length = ts_lphb_tcp_filter->length; |
| hb_tcp_filter_fp->offset = ts_lphb_tcp_filter->offset; |
| hb_tcp_filter_fp->session = ts_lphb_tcp_filter->session; |
| memcpy((void *) &hb_tcp_filter_fp->filter, (void *) &ts_lphb_tcp_filter->filter, |
| WMI_WLAN_HB_MAX_FILTER_SIZE); |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_HB_SET_TCP_PKT_FILTER_CMDID); |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send WMI_HB_SET_TCP_PKT_FILTER returned Error %d", |
| status); |
| wmi_buf_free(buf); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| error: |
| return vos_status; |
| } |
| |
| /* function : wma_lphb_conf_udp_params |
| * Description : handles the udp params command of LPHB configuration requests |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_lphb_conf_udp_params(tp_wma_handle wma_handle, |
| tSirLPHBReq *lphb_conf_req) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| int status = 0; |
| tSirLPHBUdpParamStruct *ts_lphb_udp_param; |
| wmi_buf_t buf = NULL; |
| u_int8_t *buf_ptr; |
| wmi_hb_set_udp_params_cmd_fixed_param *hb_udp_params_fp; |
| int len = sizeof(wmi_hb_set_udp_params_cmd_fixed_param); |
| |
| if (lphb_conf_req == NULL) |
| { |
| WMA_LOGE("%s : LPHB configuration is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ts_lphb_udp_param = &(lphb_conf_req->params.lphbUdpParamReq); |
| WMA_LOGI("%s: WMA --> WMI_HB_SET_UDP_PARAMS srv_ip=%d, dev_ip=%d, src_port=%d, " |
| "dst_port=%d, interval=%d, timeout=%d, session=%d, " |
| "gateway_mac=%2x:%2x:%2x:%2x:%2x:%2x", |
| __func__, |
| ts_lphb_udp_param->srv_ip, ts_lphb_udp_param->dev_ip, |
| ts_lphb_udp_param->src_port, ts_lphb_udp_param->dst_port, |
| ts_lphb_udp_param->interval, ts_lphb_udp_param->timeout, ts_lphb_udp_param->session, |
| ts_lphb_udp_param->gateway_mac[0], |
| ts_lphb_udp_param->gateway_mac[1], |
| ts_lphb_udp_param->gateway_mac[2], |
| ts_lphb_udp_param->gateway_mac[3], |
| ts_lphb_udp_param->gateway_mac[4], |
| ts_lphb_udp_param->gateway_mac[5]); |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| hb_udp_params_fp = (wmi_hb_set_udp_params_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&hb_udp_params_fp->tlv_header, |
| WMITLV_TAG_STRUC_wmi_hb_set_udp_params_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_hb_set_udp_params_cmd_fixed_param)); |
| |
| /* fill in values */ |
| hb_udp_params_fp->vdev_id = ts_lphb_udp_param->session; |
| hb_udp_params_fp->srv_ip = ts_lphb_udp_param->srv_ip; |
| hb_udp_params_fp->dev_ip = ts_lphb_udp_param->dev_ip; |
| hb_udp_params_fp->src_port = ts_lphb_udp_param->src_port; |
| hb_udp_params_fp->dst_port = ts_lphb_udp_param->dst_port; |
| hb_udp_params_fp->interval = ts_lphb_udp_param->interval; |
| hb_udp_params_fp->timeout = ts_lphb_udp_param->timeout; |
| hb_udp_params_fp->session = ts_lphb_udp_param->session; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(ts_lphb_udp_param->gateway_mac, &hb_udp_params_fp->gateway_mac); |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_HB_SET_UDP_PARAMS_CMDID); |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send WMI_HB_SET_UDP_PARAMS returned Error %d", |
| status); |
| wmi_buf_free(buf); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| error: |
| return vos_status; |
| } |
| |
| /* function : wma_lphb_conf_udp_pkt_filter |
| * Description : handles the udp packet filter command of LPHB configuration requests |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_lphb_conf_udp_pkt_filter(tp_wma_handle wma_handle, |
| tSirLPHBReq *lphb_conf_req) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| int status = 0; |
| tSirLPHBUdpFilterStruct *ts_lphb_udp_filter; |
| wmi_buf_t buf = NULL; |
| u_int8_t *buf_ptr; |
| wmi_hb_set_udp_pkt_filter_cmd_fixed_param *hb_udp_filter_fp; |
| int len = sizeof(wmi_hb_set_udp_pkt_filter_cmd_fixed_param); |
| |
| if (lphb_conf_req == NULL) |
| { |
| WMA_LOGE("%s : LPHB configuration is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ts_lphb_udp_filter = &(lphb_conf_req->params.lphbUdpFilterReq); |
| WMA_LOGI("%s: WMA --> WMI_HB_SET_UDP_PKT_FILTER length=%d, offset=%d, session=%d, " |
| "filter=%2x:%2x:%2x:%2x:%2x:%2x ...", |
| __func__, |
| ts_lphb_udp_filter->length, |
| ts_lphb_udp_filter->offset, |
| ts_lphb_udp_filter->session, |
| ts_lphb_udp_filter->filter[0], |
| ts_lphb_udp_filter->filter[1], |
| ts_lphb_udp_filter->filter[2], |
| ts_lphb_udp_filter->filter[3], |
| ts_lphb_udp_filter->filter[4], |
| ts_lphb_udp_filter->filter[5]); |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| hb_udp_filter_fp = (wmi_hb_set_udp_pkt_filter_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&hb_udp_filter_fp->tlv_header, |
| WMITLV_TAG_STRUC_wmi_hb_set_udp_pkt_filter_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_hb_set_udp_pkt_filter_cmd_fixed_param)); |
| |
| /* fill in values */ |
| hb_udp_filter_fp->vdev_id = ts_lphb_udp_filter->session; |
| hb_udp_filter_fp->length = ts_lphb_udp_filter->length; |
| hb_udp_filter_fp->offset = ts_lphb_udp_filter->offset; |
| hb_udp_filter_fp->session = ts_lphb_udp_filter->session; |
| memcpy((void *) &hb_udp_filter_fp->filter, (void *) &ts_lphb_udp_filter->filter, |
| WMI_WLAN_HB_MAX_FILTER_SIZE); |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_HB_SET_UDP_PKT_FILTER_CMDID); |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send WMI_HB_SET_UDP_PKT_FILTER returned Error %d", |
| status); |
| wmi_buf_free(buf); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto error; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| error: |
| return vos_status; |
| } |
| |
| /* function : wma_process_lphb_conf_req |
| * Description : handles LPHB configuration requests |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_process_lphb_conf_req(tp_wma_handle wma_handle, |
| tSirLPHBReq *lphb_conf_req) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| |
| if (lphb_conf_req == NULL) |
| { |
| WMA_LOGE("%s : LPHB configuration is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGI("%s : LPHB configuration cmd id is %d", __func__, |
| lphb_conf_req->cmd); |
| switch (lphb_conf_req->cmd) { |
| case LPHB_SET_EN_PARAMS_INDID: |
| vos_status = wma_lphb_conf_hbenable(wma_handle, |
| lphb_conf_req, TRUE); |
| break; |
| |
| case LPHB_SET_TCP_PARAMS_INDID: |
| vos_status = wma_lphb_conf_tcp_params(wma_handle, |
| lphb_conf_req); |
| break; |
| |
| case LPHB_SET_TCP_PKT_FILTER_INDID: |
| vos_status = wma_lphb_conf_tcp_pkt_filter(wma_handle, |
| lphb_conf_req); |
| break; |
| |
| case LPHB_SET_UDP_PARAMS_INDID: |
| vos_status = wma_lphb_conf_udp_params(wma_handle, |
| lphb_conf_req); |
| break; |
| |
| case LPHB_SET_UDP_PKT_FILTER_INDID: |
| vos_status = wma_lphb_conf_udp_pkt_filter(wma_handle, |
| lphb_conf_req); |
| break; |
| |
| case LPHB_SET_NETWORK_INFO_INDID: |
| default: |
| break; |
| } |
| |
| vos_mem_free(lphb_conf_req); |
| return vos_status; |
| } |
| #endif |
| |
| VOS_STATUS wma_process_dhcp_ind(tp_wma_handle wma_handle, |
| tAniDHCPInd *ta_dhcp_ind) |
| { |
| uint8_t vdev_id; |
| int status = 0; |
| wmi_buf_t buf = NULL; |
| u_int8_t *buf_ptr; |
| wmi_peer_set_param_cmd_fixed_param *peer_set_param_fp; |
| int len = sizeof(wmi_peer_set_param_cmd_fixed_param); |
| |
| if (!ta_dhcp_ind) |
| { |
| WMA_LOGE("%s : DHCP indication is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| if (!wma_find_vdev_by_addr(wma_handle, ta_dhcp_ind->adapterMacAddr, |
| &vdev_id)) |
| { |
| WMA_LOGE("%s: Failed to find vdev id for DHCP indication", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGI("%s: WMA --> WMI_PEER_SET_PARAM triggered by DHCP, " |
| "msgType=%s," |
| "device_mode=%d, macAddr=" MAC_ADDRESS_STR, |
| __func__, |
| ta_dhcp_ind->msgType==WDA_DHCP_START_IND? |
| "WDA_DHCP_START_IND":"WDA_DHCP_STOP_IND", |
| ta_dhcp_ind->device_mode, |
| MAC_ADDR_ARRAY(ta_dhcp_ind->peerMacAddr)); |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| peer_set_param_fp = (wmi_peer_set_param_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&peer_set_param_fp->tlv_header, |
| WMITLV_TAG_STRUC_wmi_peer_set_param_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_peer_set_param_cmd_fixed_param)); |
| |
| /* fill in values */ |
| peer_set_param_fp->vdev_id = vdev_id; |
| peer_set_param_fp->param_id = WMI_PEER_CRIT_PROTO_HINT_ENABLED; |
| if (WDA_DHCP_START_IND == ta_dhcp_ind->msgType) |
| peer_set_param_fp->param_value = 1; |
| else |
| peer_set_param_fp->param_value = 0; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(ta_dhcp_ind->peerMacAddr, |
| &peer_set_param_fp->peer_macaddr); |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_PEER_SET_PARAM_CMDID); |
| if (status != EOK) { |
| WMA_LOGE("%s: wmi_unified_cmd_send WMI_PEER_SET_PARAM_CMD" |
| " returned Error %d", |
| __func__, status); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_chan_to_mode() - calculate phy mode corresponding to channel |
| * @chan: channel |
| * @chan_offset: secondary channel offset |
| * @vht_capable: If vht capable |
| * @dot11_mode: dot11 mode |
| * |
| * calculate phy mode corresponding to channel, dot11 mode, vht capability |
| * and secondary channel offset. |
| * |
| * Return: WLAN_PHY_MODE |
| */ |
| |
| WLAN_PHY_MODE wma_chan_to_mode(uint8_t chan, ePhyChanBondState chan_offset, |
| uint8_t vht_capable, uint8_t dot11_mode) |
| { |
| WLAN_PHY_MODE phymode = MODE_UNKNOWN; |
| |
| /* 2.4 GHz band */ |
| if ((chan >= WMA_11G_CHANNEL_BEGIN) && (chan <= WMA_11G_CHANNEL_END)) { |
| switch (chan_offset) { |
| case PHY_SINGLE_CHANNEL_CENTERED: |
| /* In case of no channel bonding, use dot11_mode |
| * to set phy mode |
| */ |
| switch (dot11_mode) { |
| case WNI_CFG_DOT11_MODE_11A: |
| phymode = MODE_11A; |
| break; |
| case WNI_CFG_DOT11_MODE_11B: |
| phymode = MODE_11B; |
| break; |
| case WNI_CFG_DOT11_MODE_11G: |
| phymode = MODE_11G; |
| break; |
| case WNI_CFG_DOT11_MODE_11G_ONLY: |
| phymode = MODE_11GONLY; |
| break; |
| default: |
| /* Configure MODE_11NG_HT20 for |
| * self vdev(for vht too) |
| */ |
| phymode = MODE_11NG_HT20; |
| break; |
| } |
| break; |
| case PHY_DOUBLE_CHANNEL_LOW_PRIMARY: |
| case PHY_DOUBLE_CHANNEL_HIGH_PRIMARY: |
| phymode = vht_capable ? MODE_11AC_VHT40_2G :MODE_11NG_HT40; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| /* 5 GHz band */ |
| if ((chan >= WMA_11A_CHANNEL_BEGIN) && (chan <= WMA_11A_CHANNEL_END)) { |
| switch (chan_offset) { |
| case PHY_SINGLE_CHANNEL_CENTERED: |
| if (dot11_mode == WNI_CFG_DOT11_MODE_11A) |
| phymode = MODE_11A; |
| else |
| phymode = vht_capable ? MODE_11AC_VHT20 : |
| MODE_11NA_HT20; |
| |
| break; |
| case PHY_DOUBLE_CHANNEL_LOW_PRIMARY: |
| case PHY_DOUBLE_CHANNEL_HIGH_PRIMARY: |
| phymode = vht_capable ? MODE_11AC_VHT40 :MODE_11NA_HT40; |
| break; |
| case PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_CENTERED: |
| case PHY_QUADRUPLE_CHANNEL_20MHZ_CENTERED_40MHZ_CENTERED: |
| case PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_CENTERED: |
| case PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW: |
| case PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW: |
| case PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH: |
| case PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH: |
| phymode = MODE_11AC_VHT80; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| /* 5.9 GHz Band */ |
| if ((chan >= WMA_11P_CHANNEL_BEGIN) && (chan <= WMA_11P_CHANNEL_END)) { |
| /* Only Legacy Modulation Schemes are supported */ |
| phymode = MODE_11A; |
| } |
| |
| WMA_LOGD("%s: phymode %d channel %d offset %d vht_capable %d " |
| "dot11_mode %d", __func__, phymode, chan, |
| chan_offset, vht_capable, dot11_mode); |
| |
| return phymode; |
| } |
| |
| tANI_U8 wma_getCenterChannel(tANI_U8 chan, tANI_U8 chan_offset) |
| { |
| tANI_U8 band_center_chan = 0; |
| |
| if ((chan_offset == PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_CENTERED) || |
| (chan_offset == PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW)) |
| band_center_chan = chan + 2; |
| else if (chan_offset == PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW) |
| band_center_chan = chan + 6; |
| else if ((chan_offset == PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH) || |
| (chan_offset == PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_CENTERED)) |
| band_center_chan = chan - 2; |
| else if (chan_offset == PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH) |
| band_center_chan = chan - 6; |
| |
| return band_center_chan; |
| } |
| /** |
| * wma_switch_channel() - WMA api to switch channel dynamically |
| * @wma: Pointer of WMA context |
| * @req: Pointer vdev_start having channel switch info. |
| * |
| * Return: 0 for success, otherwise appropriate error code |
| */ |
| VOS_STATUS wma_switch_channel(tp_wma_handle wma, struct wma_vdev_start_req *req) |
| { |
| |
| wmi_buf_t buf; |
| wmi_channel *cmd; |
| int32_t len, ret; |
| WLAN_PHY_MODE chanmode; |
| struct wma_txrx_node *intr = wma->interfaces; |
| tpAniSirGlobal pmac; |
| uint8_t *buf_ptr; |
| |
| pmac = vos_get_context(VOS_MODULE_ID_PE, wma->vos_context); |
| |
| if (pmac == NULL) { |
| WMA_LOGE("%s: vdev start failed as pmac is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_channel *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_channel, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_channel)); |
| |
| /* Fill channel info */ |
| cmd->mhz = vos_chan_to_freq(req->chan); |
| chanmode = wma_chan_to_mode(req->chan, req->chan_offset, |
| req->vht_capable, req->dot11_mode); |
| |
| intr[req->vdev_id].chanmode = chanmode; /* save channel mode */ |
| intr[req->vdev_id].ht_capable = req->ht_capable; |
| intr[req->vdev_id].vht_capable = req->vht_capable; |
| intr[req->vdev_id].config.gtx_info.gtxRTMask[0] = |
| CFG_TGT_DEFAULT_GTX_HT_MASK; |
| intr[req->vdev_id].config.gtx_info.gtxRTMask[1] = |
| CFG_TGT_DEFAULT_GTX_VHT_MASK; |
| |
| if (wlan_cfgGetInt(pmac, WNI_CFG_TGT_GTX_USR_CFG, |
| &intr[req->vdev_id].config.gtx_info.gtxUsrcfg) |
| != eSIR_SUCCESS) { |
| WMA_LOGE("Failed to read target gtx user config"); |
| intr[req->vdev_id].config.gtx_info.gtxUsrcfg = |
| WNI_CFG_TGT_GTX_USR_CFG_STADEF; |
| } |
| |
| intr[req->vdev_id].config.gtx_info.gtxPERThreshold = |
| CFG_TGT_DEFAULT_GTX_PER_THRESHOLD; |
| intr[req->vdev_id].config.gtx_info.gtxPERMargin = |
| CFG_TGT_DEFAULT_GTX_PER_MARGIN; |
| intr[req->vdev_id].config.gtx_info.gtxTPCstep = |
| CFG_TGT_DEFAULT_GTX_TPC_STEP; |
| intr[req->vdev_id].config.gtx_info.gtxTPCMin = |
| CFG_TGT_DEFAULT_GTX_TPC_MIN; |
| intr[req->vdev_id].config.gtx_info.gtxBWMask = |
| CFG_TGT_DEFAULT_GTX_BW_MASK; |
| intr[req->vdev_id].mhz = cmd->mhz; |
| intr[req->vdev_id].channelwidth = req->channelwidth; |
| |
| WMI_SET_CHANNEL_MODE(cmd, chanmode); |
| cmd->band_center_freq1 = cmd->mhz; |
| |
| if (chanmode == MODE_11AC_VHT80) |
| cmd->band_center_freq1 = vos_chan_to_freq(wma_getCenterChannel |
| (req->chan, req->chan_offset)); |
| |
| if ((chanmode == MODE_11NA_HT40) || (chanmode == MODE_11NG_HT40) || |
| (chanmode == MODE_11AC_VHT40) || (chanmode == MODE_11AC_VHT40_2G)) { |
| if (req->chan_offset == PHY_DOUBLE_CHANNEL_LOW_PRIMARY) |
| cmd->band_center_freq1 += 10; |
| else |
| cmd->band_center_freq1 -= 10; |
| } |
| cmd->band_center_freq2 = 0; |
| |
| /* Set half or quarter rate WMI flags */ |
| if (req->is_half_rate) |
| WMI_SET_CHANNEL_FLAG(cmd, WMI_CHAN_FLAG_HALF_RATE); |
| else if (req->is_quarter_rate) |
| WMI_SET_CHANNEL_FLAG(cmd, WMI_CHAN_FLAG_QUARTER_RATE); |
| |
| WMA_LOGE("switch chan width: quarterrate_flag: %d, halfrate_flag: %d", |
| req->is_quarter_rate, req->is_half_rate); |
| |
| /* Find out min, max and regulatory power levels */ |
| WMI_SET_CHANNEL_REG_POWER(cmd, req->max_txpow); |
| WMI_SET_CHANNEL_MAX_TX_POWER(cmd, req->max_txpow); |
| |
| |
| WMA_LOGD("%s: freq %d channel %d chanmode %d center_chan %d center_freq2 %d reg_info_1: 0x%x reg_info_2: 0x%x, req->max_txpow: 0x%x", |
| __func__, cmd->mhz, req->chan, chanmode, |
| cmd->band_center_freq1, cmd->band_center_freq2, |
| cmd->reg_info_1, cmd->reg_info_2, req->max_txpow); |
| |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_PDEV_SET_CHANNEL_CMDID); |
| |
| if (ret < 0) { |
| WMA_LOGP("%s: Failed to send vdev start command", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| uint32_t wma_get_bcn_rate_code(uint16_t rate) |
| { |
| /* rate in multiples of 100 Kbps */ |
| switch (rate) { |
| case WMA_BEACON_TX_RATE_1_M: |
| return WMA_BEACON_TX_RATE_HW_CODE_1_M; |
| case WMA_BEACON_TX_RATE_2_M: |
| return WMA_BEACON_TX_RATE_HW_CODE_2_M; |
| case WMA_BEACON_TX_RATE_5_5_M: |
| return WMA_BEACON_TX_RATE_HW_CODE_5_5_M; |
| case WMA_BEACON_TX_RATE_11_M: |
| return WMA_BEACON_TX_RATE_HW_CODE_11M; |
| case WMA_BEACON_TX_RATE_6_M: |
| return WMA_BEACON_TX_RATE_HW_CODE_6_M; |
| case WMA_BEACON_TX_RATE_9_M: |
| return WMA_BEACON_TX_RATE_HW_CODE_9_M; |
| case WMA_BEACON_TX_RATE_12_M: |
| return WMA_BEACON_TX_RATE_HW_CODE_12_M; |
| case WMA_BEACON_TX_RATE_18_M: |
| return WMA_BEACON_TX_RATE_HW_CODE_18_M; |
| case WMA_BEACON_TX_RATE_24_M: |
| return WMA_BEACON_TX_RATE_HW_CODE_24_M; |
| case WMA_BEACON_TX_RATE_36_M: |
| return WMA_BEACON_TX_RATE_HW_CODE_36_M; |
| case WMA_BEACON_TX_RATE_48_M: |
| return WMA_BEACON_TX_RATE_HW_CODE_48_M; |
| case WMA_BEACON_TX_RATE_54_M: |
| return WMA_BEACON_TX_RATE_HW_CODE_54_M; |
| default: |
| return WMA_BEACON_TX_RATE_HW_CODE_1_M; |
| } |
| } |
| |
| VOS_STATUS wma_vdev_start(tp_wma_handle wma, |
| struct wma_vdev_start_req *req, v_BOOL_t isRestart) |
| { |
| wmi_vdev_start_request_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| wmi_channel *chan; |
| int32_t len, ret; |
| WLAN_PHY_MODE chanmode; |
| u_int8_t *buf_ptr; |
| struct wma_txrx_node *intr = wma->interfaces; |
| tpAniSirGlobal pmac = NULL; |
| struct ath_dfs *dfs; |
| ol_txrx_pdev_handle pdev = NULL; |
| |
| pmac = (tpAniSirGlobal) |
| vos_get_context(VOS_MODULE_ID_PE, wma->vos_context); |
| |
| if (pmac == NULL) { |
| WMA_LOGE("%s: vdev start failed as pmac is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| |
| if (pdev == NULL) { |
| WMA_LOGE("%s: vdev start failed as pdev is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| dfs = (struct ath_dfs *)wma->dfs_ic->ic_dfs; |
| |
| WMA_LOGD("%s: Enter isRestart=%d vdev=%d", __func__, isRestart,req->vdev_id); |
| len = sizeof(*cmd) + sizeof(wmi_channel) + |
| WMI_TLV_HDR_SIZE; |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_vdev_start_request_cmd_fixed_param *) buf_ptr; |
| chan = (wmi_channel *) (buf_ptr + sizeof(*cmd)); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_start_request_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vdev_start_request_cmd_fixed_param)); |
| WMITLV_SET_HDR(&chan->tlv_header, |
| WMITLV_TAG_STRUC_wmi_channel, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_channel)); |
| cmd->vdev_id = req->vdev_id; |
| |
| /* Fill channel info */ |
| chan->mhz = vos_chan_to_freq(req->chan); |
| chanmode = wma_chan_to_mode(req->chan, req->chan_offset, |
| req->vht_capable, req->dot11_mode); |
| |
| intr[cmd->vdev_id].chanmode = chanmode; /* save channel mode */ |
| intr[cmd->vdev_id].ht_capable = req->ht_capable; |
| intr[cmd->vdev_id].vht_capable = req->vht_capable; |
| intr[cmd->vdev_id].config.gtx_info.gtxRTMask[0] = CFG_TGT_DEFAULT_GTX_HT_MASK; |
| intr[cmd->vdev_id].config.gtx_info.gtxRTMask[1] = CFG_TGT_DEFAULT_GTX_VHT_MASK; |
| |
| if (wlan_cfgGetInt(pmac, WNI_CFG_TGT_GTX_USR_CFG, |
| &intr[cmd->vdev_id].config.gtx_info.gtxUsrcfg) |
| != eSIR_SUCCESS) { |
| WMA_LOGE("Failed to read target gtx user config"); |
| intr[cmd->vdev_id].config.gtx_info.gtxUsrcfg = |
| WNI_CFG_TGT_GTX_USR_CFG_STADEF; |
| } |
| |
| intr[cmd->vdev_id].config.gtx_info.gtxPERThreshold = CFG_TGT_DEFAULT_GTX_PER_THRESHOLD; |
| intr[cmd->vdev_id].config.gtx_info.gtxPERMargin = CFG_TGT_DEFAULT_GTX_PER_MARGIN; |
| intr[cmd->vdev_id].config.gtx_info.gtxTPCstep = CFG_TGT_DEFAULT_GTX_TPC_STEP; |
| intr[cmd->vdev_id].config.gtx_info.gtxTPCMin = CFG_TGT_DEFAULT_GTX_TPC_MIN; |
| intr[cmd->vdev_id].config.gtx_info.gtxBWMask = CFG_TGT_DEFAULT_GTX_BW_MASK; |
| intr[cmd->vdev_id].mhz = chan->mhz; |
| intr[req->vdev_id].channelwidth = req->channelwidth; |
| |
| WMI_SET_CHANNEL_MODE(chan, chanmode); |
| chan->band_center_freq1 = chan->mhz; |
| |
| if (chanmode == MODE_11AC_VHT80) |
| chan->band_center_freq1 = vos_chan_to_freq(wma_getCenterChannel |
| (req->chan, req->chan_offset)); |
| |
| if ((chanmode == MODE_11NA_HT40) || (chanmode == MODE_11NG_HT40) || |
| (chanmode == MODE_11AC_VHT40) || (chanmode == MODE_11AC_VHT40_2G)) { |
| if (req->chan_offset == PHY_DOUBLE_CHANNEL_LOW_PRIMARY) |
| chan->band_center_freq1 += 10; |
| else |
| chan->band_center_freq1 -= 10; |
| } |
| chan->band_center_freq2 = 0; |
| |
| /* Set half or quarter rate WMI flags */ |
| if (req->is_half_rate) { |
| WMI_SET_CHANNEL_FLAG(chan, WMI_CHAN_FLAG_HALF_RATE); |
| } else if (req->is_quarter_rate) { |
| WMI_SET_CHANNEL_FLAG(chan, WMI_CHAN_FLAG_QUARTER_RATE); |
| } |
| |
| WMA_LOGE("BSS chan width: quarterrate_flag: %d, halfrate_flag: %d", |
| req->is_quarter_rate, req->is_half_rate); |
| |
| /* |
| * If the channel has DFS set, flip on radar reporting. |
| * |
| * It may be that this should only be done for IBSS/hostap operation |
| * as this flag may be interpreted (at some point in the future) |
| * by the firmware as "oh, and please do radar DETECTION." |
| * |
| * If that is ever the case we would insert the decision whether to |
| * enable the firmware flag here. |
| */ |
| |
| /* |
| * If the Channel is DFS, |
| * set the WMI_CHAN_FLAG_DFS flag |
| */ |
| if ((VOS_MONITOR_MODE != vos_get_conparam()) && req->is_dfs) { |
| WMI_SET_CHANNEL_FLAG(chan, WMI_CHAN_FLAG_DFS); |
| cmd->disable_hw_ack = VOS_TRUE; |
| |
| req->dfs_pri_multiplier = wma->dfs_pri_multiplier; |
| |
| /* |
| * Configure the current operating channel |
| * to DFS module only if the device operating |
| * mode is AP. |
| * Enable/Disable Phyerr filtering offload |
| * depending on dfs_phyerr_filter_offload |
| * flag status as set in ini for SAP mode. |
| * Currently, only AP supports DFS master |
| * mode operation on DFS channels, P2P-GO |
| * does not support operation on DFS Channels. |
| */ |
| if (wma_is_vdev_in_ap_mode(wma, cmd->vdev_id) == true) { |
| /* |
| * If DFS regulatory domain is invalid, |
| * then, DFS radar filters intialization |
| * will fail. So, do not configure the |
| * channel in to DFS modlue, do not |
| * indicate if phyerror filtering offload |
| * is enabled or not to the firmware, simply |
| * fail the VDEV start on the DFS channel |
| * early on, to protect the DFS module from |
| * processing phyerrors without being intialized. |
| */ |
| if (DFS_UNINIT_DOMAIN == wma->dfs_ic->current_dfs_regdomain) { |
| WMA_LOGE("%s[%d]:DFS Configured with Invalid regdomain" |
| " Failed to send VDEV START command", |
| __func__, __LINE__); |
| |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| |
| adf_os_spin_lock_bh(&wma->dfs_ic->chan_lock); |
| if (isRestart) |
| wma->dfs_ic->disable_phy_err_processing = true; |
| /* provide the current channel to DFS */ |
| wma->dfs_ic->ic_curchan = |
| wma_dfs_configure_channel(wma->dfs_ic,chan,chanmode,req); |
| adf_os_spin_unlock_bh(&wma->dfs_ic->chan_lock); |
| |
| wma_unified_dfs_phyerr_filter_offload_enable(wma); |
| dfs->disable_dfs_ch_switch = |
| pmac->sap.SapDfsInfo.disable_dfs_ch_switch; |
| dfs->dfs_enable_radar_war = |
| pmac->sap.SapDfsInfo.sap_enable_radar_war; |
| } |
| } |
| |
| cmd->beacon_interval = req->beacon_intval; |
| cmd->dtim_period = req->dtim_period; |
| |
| cmd->flags &= ~WMI_UNIFIED_VDEV_START_BCN_TX_RATE_PRESENT; |
| if (req->beacon_tx_rate) { |
| WMA_LOGI("%s: beacon_tx_rate present. beacon tx rate [%hu * 100 Kbps]", |
| __func__, req->beacon_tx_rate); |
| cmd->flags |= WMI_UNIFIED_VDEV_START_BCN_TX_RATE_PRESENT; |
| /* beacon_tx_rate is in multiples of 100 Kbps. Convert the |
| * data rate to hw rate code */ |
| cmd->bcn_tx_rate = wma_get_bcn_rate_code(req->beacon_tx_rate); |
| WMA_LOGI("bcn rate code %02x", cmd->bcn_tx_rate); |
| } |
| |
| /* FIXME: Find out min, max and regulatory power levels */ |
| WMI_SET_CHANNEL_REG_POWER(chan, req->max_txpow); |
| WMI_SET_CHANNEL_MAX_TX_POWER(chan, req->max_txpow); |
| |
| /* TODO: Handle regulatory class, max antenna */ |
| if (!isRestart) { |
| cmd->beacon_interval = req->beacon_intval; |
| cmd->dtim_period = req->dtim_period; |
| |
| /* Copy the SSID */ |
| if (req->ssid.length) { |
| if (req->ssid.length < sizeof(cmd->ssid.ssid)) |
| cmd->ssid.ssid_len = req->ssid.length; |
| else |
| cmd->ssid.ssid_len = sizeof(cmd->ssid.ssid); |
| vos_mem_copy(cmd->ssid.ssid, req->ssid.ssId, |
| cmd->ssid.ssid_len); |
| } |
| |
| if (req->hidden_ssid) |
| cmd->flags |= WMI_UNIFIED_VDEV_START_HIDDEN_SSID; |
| |
| if (req->pmf_enabled) |
| cmd->flags |= WMI_UNIFIED_VDEV_START_PMF_ENABLED; |
| } |
| |
| cmd->num_noa_descriptors = 0; |
| buf_ptr = (u_int8_t *)(((uintptr_t) cmd) + sizeof(*cmd) + |
| sizeof(wmi_channel)); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| cmd->num_noa_descriptors * |
| sizeof(wmi_p2p_noa_descriptor)); |
| WMA_LOGD("%s: vdev_id %d freq %d channel %d chanmode %d is_dfs %d " |
| "beacon interval %d dtim %d center_chan %d center_freq2 %d " |
| "reg_info_1: 0x%x reg_info_2: 0x%x, req->max_txpow: 0x%x", |
| __func__, req->vdev_id, chan->mhz, req->chan, chanmode, req->is_dfs, |
| req->beacon_intval, cmd->dtim_period, chan->band_center_freq1, |
| chan->band_center_freq2, chan->reg_info_1, chan->reg_info_2, |
| req->max_txpow); |
| |
| /* Store vdev params in SAP mode which can be used in vdev restart */ |
| if (intr[req->vdev_id].type == WMI_VDEV_TYPE_AP && |
| intr[req->vdev_id].sub_type == 0) { |
| intr[req->vdev_id].vdev_restart_params.vdev_id = req->vdev_id; |
| intr[req->vdev_id].vdev_restart_params.ssid.ssid_len = cmd->ssid.ssid_len; |
| vos_mem_copy(intr[req->vdev_id].vdev_restart_params.ssid.ssid, cmd->ssid.ssid, |
| cmd->ssid.ssid_len); |
| intr[req->vdev_id].vdev_restart_params.flags = cmd->flags; |
| intr[req->vdev_id].vdev_restart_params.requestor_id = cmd->requestor_id; |
| intr[req->vdev_id].vdev_restart_params.disable_hw_ack = cmd->disable_hw_ack; |
| intr[req->vdev_id].vdev_restart_params.chan.mhz = chan->mhz; |
| intr[req->vdev_id].vdev_restart_params.chan.band_center_freq1 = chan->band_center_freq1; |
| intr[req->vdev_id].vdev_restart_params.chan.band_center_freq2 = chan->band_center_freq1; |
| intr[req->vdev_id].vdev_restart_params.chan.info = chan->info; |
| intr[req->vdev_id].vdev_restart_params.chan.reg_info_1 = chan->reg_info_1; |
| intr[req->vdev_id].vdev_restart_params.chan.reg_info_2 = chan->reg_info_2; |
| } |
| |
| if (isRestart) { |
| /* |
| * Marking the VDEV UP STATUS to FALSE |
| * since, VDEV RESTART will do a VDEV DOWN |
| * in the firmware. |
| */ |
| intr[cmd->vdev_id].vdev_up = FALSE; |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_VDEV_RESTART_REQUEST_CMDID); |
| |
| } else { |
| |
| /* |
| *Need to put other vdevs to pause to avoid current connection |
| *credit starvation. |
| */ |
| if (wma_is_mcc_starting(wma, chan->mhz)) { |
| WMA_LOGD("%s, vdev_id: %d, pasue other VDEVs when MCC on", |
| __func__, cmd->vdev_id); |
| wdi_in_pdev_pause_other_vdev(pdev, |
| OL_TXQ_PAUSE_REASON_MCC_VDEV_START, |
| req->vdev_id); |
| wma->pause_other_vdev_on_mcc_start = true; |
| } |
| |
| WMA_LOGD("%s, vdev_id: %d, unpausing tx_ll_queue at VDEV_START", |
| __func__, cmd->vdev_id); |
| wdi_in_vdev_unpause(wma->interfaces[cmd->vdev_id].handle, |
| 0xffffffff); |
| wma->interfaces[cmd->vdev_id].pause_bitmap = 0; |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_VDEV_START_REQUEST_CMDID); |
| } |
| |
| if (ret < 0) { |
| WMA_LOGP("%s: Failed to send vdev start command", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| void wma_vdev_resp_timer(void *data) |
| { |
| tp_wma_handle wma; |
| struct wma_target_req *tgt_req = (struct wma_target_req *)data; |
| void *vos_context = vos_get_global_context(VOS_MODULE_ID_WDA, NULL); |
| ol_txrx_peer_handle peer; |
| ol_txrx_pdev_handle pdev; |
| u_int8_t peer_id; |
| struct wma_target_req *msg; |
| #ifdef FEATURE_AP_MCC_CH_AVOIDANCE |
| tpAniSirGlobal mac_ctx = NULL; |
| #endif /* FEATURE_AP_MCC_CH_AVOIDANCE */ |
| |
| wma = (tp_wma_handle) vos_get_context(VOS_MODULE_ID_WDA, vos_context); |
| |
| if (NULL == wma) { |
| WMA_LOGE("%s: Failed to get wma", __func__); |
| return; |
| } |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to get pdev", __func__); |
| vos_timer_stop(&tgt_req->event_timeout); |
| goto free_tgt_req; |
| } |
| |
| #ifdef FEATURE_AP_MCC_CH_AVOIDANCE |
| mac_ctx = (tpAniSirGlobal)vos_get_context(VOS_MODULE_ID_PE, |
| wma->vos_context); |
| if (NULL == mac_ctx) { |
| WMA_LOGE("%s: Failed to get mac_ctx", __func__); |
| vos_timer_stop(&tgt_req->event_timeout); |
| goto free_tgt_req; |
| } |
| #endif /* FEATURE_AP_MCC_CH_AVOIDANCE */ |
| |
| WMA_LOGA("%s: request %d is timed out for vdev_id - %d", __func__, |
| tgt_req->msg_type, tgt_req->vdev_id); |
| msg = wma_find_vdev_req(wma, tgt_req->vdev_id, tgt_req->type); |
| |
| if (!msg) { |
| WMA_LOGE("%s: Failed to lookup request message - %d", |
| __func__, tgt_req->msg_type); |
| return; |
| } |
| |
| if (tgt_req->msg_type == WDA_CHNL_SWITCH_REQ) { |
| tpSwitchChannelParams params = |
| (tpSwitchChannelParams)tgt_req->user_data; |
| params->status = VOS_STATUS_E_TIMEOUT; |
| WMA_LOGA("%s: WDA_SWITCH_CHANNEL_REQ timedout", __func__); |
| wma_send_msg(wma, WDA_SWITCH_CHANNEL_RSP, (void *)params, 0); |
| wma->roam_preauth_chan_context = NULL; |
| adf_os_spin_lock_bh(&wma->roam_preauth_lock); |
| wma->roam_preauth_scan_id = -1; |
| adf_os_spin_unlock_bh(&wma->roam_preauth_lock); |
| if (wma->interfaces[tgt_req->vdev_id].is_channel_switch) |
| wma->interfaces[tgt_req->vdev_id].is_channel_switch = |
| VOS_FALSE; |
| } else if (tgt_req->msg_type == WDA_DELETE_BSS_REQ) { |
| tpDeleteBssParams params = |
| (tpDeleteBssParams)tgt_req->user_data; |
| struct beacon_info *bcn; |
| struct wma_txrx_node *iface; |
| |
| if (tgt_req->vdev_id > wma->max_bssid) { |
| WMA_LOGE("%s: Invalid vdev_id %d", __func__, |
| tgt_req->vdev_id); |
| vos_mem_free(params); |
| vos_timer_stop(&tgt_req->event_timeout); |
| goto free_tgt_req; |
| } |
| |
| iface = &wma->interfaces[tgt_req->vdev_id]; |
| if (iface->handle == NULL) { |
| WMA_LOGE("%s vdev id %d is already deleted", |
| __func__, tgt_req->vdev_id); |
| vos_mem_free(params); |
| vos_timer_stop(&tgt_req->event_timeout); |
| goto free_tgt_req; |
| } |
| |
| #ifdef QCA_IBSS_SUPPORT |
| if (wma_is_vdev_in_ibss_mode(wma, tgt_req->vdev_id)) |
| wma_delete_all_ibss_peers(wma, tgt_req->vdev_id); |
| else |
| #endif |
| { |
| if (wma_is_vdev_in_ap_mode(wma, tgt_req->vdev_id)) |
| { |
| wma_delete_all_ap_remote_peers(wma, tgt_req->vdev_id); |
| } |
| peer = ol_txrx_find_peer_by_addr(pdev, params->bssid, |
| &peer_id); |
| wma_remove_peer(wma, params->bssid, tgt_req->vdev_id, |
| peer, VOS_FALSE); |
| } |
| |
| if (wmi_unified_vdev_down_send(wma->wmi_handle, tgt_req->vdev_id) < 0) { |
| WMA_LOGE("Failed to send vdev down cmd: vdev %d", |
| tgt_req->vdev_id); |
| } else { |
| wma->interfaces[tgt_req->vdev_id].vdev_up = FALSE; |
| #ifdef FEATURE_AP_MCC_CH_AVOIDANCE |
| if (mac_ctx->sap.sap_channel_avoidance) |
| wma_find_mcc_ap(wma, tgt_req->vdev_id, false); |
| #endif /* FEATURE_AP_MCC_CH_AVOIDANCE */ |
| } |
| ol_txrx_vdev_flush(iface->handle); |
| WMA_LOGD("%s, vdev_id: %d, un-pausing tx_ll_queue for WDA_DELETE_BSS_REQ timeout", |
| __func__, tgt_req->vdev_id); |
| wdi_in_vdev_unpause(iface->handle, |
| OL_TXQ_PAUSE_REASON_VDEV_STOP); |
| iface->pause_bitmap &= ~(1 << PAUSE_TYPE_HOST); |
| adf_os_atomic_set(&iface->bss_status, WMA_BSS_STATUS_STOPPED); |
| WMA_LOGD("%s: (type %d subtype %d) BSS is stopped", |
| __func__, iface->type, iface->sub_type); |
| |
| bcn = wma->interfaces[tgt_req->vdev_id].beacon; |
| |
| if (bcn) { |
| WMA_LOGD("%s: Freeing beacon struct %pK, " |
| "template memory %pK", __func__, |
| bcn, bcn->buf); |
| if (bcn->dma_mapped) |
| adf_nbuf_unmap_single(pdev->osdev, bcn->buf, |
| ADF_OS_DMA_TO_DEVICE); |
| adf_nbuf_free(bcn->buf); |
| vos_mem_free(bcn); |
| wma->interfaces[tgt_req->vdev_id].beacon = NULL; |
| } |
| |
| params->status = VOS_STATUS_E_TIMEOUT; |
| WMA_LOGA("%s: WDA_DELETE_BSS_REQ timedout", __func__); |
| wma_send_msg(wma, WDA_DELETE_BSS_RSP, (void *)params, 0); |
| if (iface->del_staself_req) { |
| WMA_LOGA("scheduling defered deletion(vdev id %x)", |
| tgt_req->vdev_id); |
| wma_vdev_detach(wma, iface->del_staself_req, 1); |
| } |
| } else if (tgt_req->msg_type == WDA_DEL_STA_SELF_REQ) { |
| struct wma_txrx_node *iface = |
| (struct wma_txrx_node *)tgt_req->user_data; |
| tpDelStaSelfParams params = |
| (tpDelStaSelfParams)iface->del_staself_req; |
| |
| params->status = VOS_STATUS_E_TIMEOUT; |
| WMA_LOGA("%s: WDA_DEL_STA_SELF_REQ timedout", __func__); |
| wma_send_msg(wma, WDA_DEL_STA_SELF_RSP, |
| (void *)iface->del_staself_req, 0); |
| if(iface->addBssStaContext) |
| adf_os_mem_free(iface->addBssStaContext); |
| #if defined WLAN_FEATURE_VOWIFI_11R |
| if (iface->staKeyParams) |
| adf_os_mem_free(iface->staKeyParams); |
| #endif |
| vos_mem_zero(iface, sizeof(*iface)); |
| } else if (tgt_req->msg_type == WDA_ADD_BSS_REQ) { |
| tpAddBssParams params = (tpAddBssParams)tgt_req->user_data; |
| tDeleteBssParams *del_bss_params = |
| vos_mem_malloc(sizeof(tDeleteBssParams)); |
| if (NULL == del_bss_params) { |
| WMA_LOGE("Failed to allocate memory for del_bss_params"); |
| peer = ol_txrx_find_peer_by_addr(pdev, params->bssId, |
| &peer_id); |
| goto error0; |
| } |
| |
| del_bss_params->status = params->status = |
| eHAL_STATUS_FW_MSG_TIMEDOUT; |
| del_bss_params->sessionId = params->sessionId; |
| del_bss_params->bssIdx = params->bssIdx; |
| vos_mem_copy(del_bss_params->bssid, params->bssId, |
| sizeof(tSirMacAddr)); |
| |
| WMA_LOGA("%s: WDA_ADD_BSS_REQ timedout", __func__); |
| peer = ol_txrx_find_peer_by_addr(pdev, params->bssId, &peer_id); |
| if (!peer) { |
| WMA_LOGP("%s: Failed to find peer %pM", __func__, params->bssId); |
| } |
| msg = wma_fill_vdev_req(wma, tgt_req->vdev_id, WDA_DELETE_BSS_REQ, |
| WMA_TARGET_REQ_TYPE_VDEV_STOP, |
| del_bss_params, |
| WMA_VDEV_STOP_REQUEST_TIMEOUT); |
| if (!msg) { |
| WMA_LOGP("%s: Failed to fill vdev request for vdev_id %d", |
| __func__, tgt_req->vdev_id); |
| vos_mem_free(del_bss_params); |
| goto error0; |
| } |
| |
| WMA_LOGD("%s, vdev_id: %d, pausing tx_ll_queue for VDEV_STOP (WDA_ADD_BSS_REQ timedout)", |
| __func__, tgt_req->vdev_id); |
| wdi_in_vdev_pause(wma->interfaces[tgt_req->vdev_id].handle, |
| OL_TXQ_PAUSE_REASON_VDEV_STOP); |
| wma->interfaces[tgt_req->vdev_id].pause_bitmap |= |
| (1 << PAUSE_TYPE_HOST); |
| |
| if (wma->pause_other_vdev_on_mcc_start) { |
| WMA_LOGD("%s: unpause other vdevs since paused when MCC start", __func__); |
| wma->pause_other_vdev_on_mcc_start = false; |
| wdi_in_pdev_unpause_other_vdev(pdev, |
| OL_TXQ_PAUSE_REASON_MCC_VDEV_START, |
| tgt_req->vdev_id); |
| } |
| |
| if (wmi_unified_vdev_stop_send(wma->wmi_handle, tgt_req->vdev_id)) { |
| WMA_LOGP("%s: %d Failed to send vdev stop", __func__, __LINE__); |
| vos_mem_free(del_bss_params); |
| wma_remove_vdev_req(wma, tgt_req->vdev_id, |
| WMA_TARGET_REQ_TYPE_VDEV_STOP); |
| goto error0; |
| } |
| WMA_LOGI("%s: bssid %pM vdev_id %d", __func__, params->bssId, |
| tgt_req->vdev_id); |
| error0: |
| if (peer) |
| wma_remove_peer(wma, params->bssId, |
| tgt_req->vdev_id, peer, |
| VOS_FALSE); |
| wma_send_msg(wma, WDA_ADD_BSS_RSP, (void *)params, 0); |
| } else if (tgt_req->msg_type == WDA_OCB_SET_CONFIG_CMD) { |
| struct wma_txrx_node *iface; |
| |
| WMA_LOGE(FL("Failed to send OCB set config cmd")); |
| iface = &wma->interfaces[tgt_req->vdev_id]; |
| iface->vdev_up = FALSE; |
| wma_ocb_set_config_resp(wma, VOS_STATUS_E_TIMEOUT); |
| } else if (tgt_req->msg_type == WDA_HIDDEN_SSID_VDEV_RESTART) { |
| WMA_LOGE("Hidden ssid vdev restart Timed Out; vdev_id: %d, type = %d", |
| tgt_req->vdev_id, tgt_req->type); |
| } |
| |
| free_tgt_req: |
| vos_timer_destroy(&tgt_req->event_timeout); |
| adf_os_mem_free(tgt_req); |
| } |
| |
| static void |
| wma_update_beacon_interval(tp_wma_handle wma, u_int8_t vdev_id, |
| u_int16_t beacon_interval); |
| /** |
| * wma_vdev_reset_beacon_interval_timer() - reset beacon interval back |
| * to its original value after the channel switch. |
| * |
| * @data: data |
| * |
| * Return: void |
| */ |
| void wma_vdev_reset_beacon_interval_timer(void *data) |
| { |
| tp_wma_handle wma; |
| struct wma_beacon_interval_reset_req *req = |
| (struct wma_beacon_interval_reset_req *)data; |
| void *vos_context = |
| vos_get_global_context(VOS_MODULE_ID_WDA, NULL); |
| uint16_t beacon_interval = req->interval; |
| uint8_t vdev_id = req->vdev_id; |
| wma = (tp_wma_handle)vos_get_context(VOS_MODULE_ID_WDA, vos_context); |
| |
| if (NULL == wma) { |
| WMA_LOGE("%s: Failed to get wma", __func__); |
| goto end; |
| } |
| |
| /* Change the beacon interval back to its original value */ |
| WMA_LOGE("%s: Change beacon interval back to %d", |
| __func__, beacon_interval); |
| wma_update_beacon_interval(wma, vdev_id, beacon_interval); |
| |
| end: |
| vos_timer_stop(&req->event_timeout); |
| vos_timer_destroy(&req->event_timeout); |
| adf_os_mem_free(req); |
| } |
| |
| /** |
| * wma_fill_beacon_interval_reset_req() - req to reset beacon interval |
| * |
| * @wma: wma handle |
| * @vdev_id: vdev id |
| * @beacon_interval: beacon interval |
| * @timeout: timeout val |
| * |
| * Return: status |
| */ |
| int wma_fill_beacon_interval_reset_req(tp_wma_handle wma, uint8_t vdev_id, |
| uint16_t beacon_interval, uint32_t timeout) |
| { |
| struct wma_beacon_interval_reset_req *req; |
| |
| req = adf_os_mem_alloc(NULL, sizeof(*req)); |
| if (!req) { |
| WMA_LOGE("%s: Failed to allocate memory" |
| "for beacon_interval_reset_req vdev %d", |
| __func__, vdev_id); |
| return -ENOMEM; |
| } |
| |
| WMA_LOGD("%s: vdev_id %d ", __func__, vdev_id); |
| req->vdev_id = vdev_id; |
| req->interval = beacon_interval; |
| vos_timer_init(&req->event_timeout, VOS_TIMER_TYPE_SW, |
| wma_vdev_reset_beacon_interval_timer, req); |
| vos_timer_start(&req->event_timeout, timeout); |
| |
| return 0; |
| } |
| |
| struct wma_target_req *wma_fill_vdev_req(tp_wma_handle wma, u_int8_t vdev_id, |
| u_int32_t msg_type, u_int8_t type, |
| void *params, u_int32_t timeout) |
| { |
| struct wma_target_req *req; |
| |
| req = adf_os_mem_alloc(NULL, sizeof(*req)); |
| if (!req) { |
| WMA_LOGP("%s: Failed to allocate memory for msg %d vdev %d", |
| __func__, msg_type, vdev_id); |
| return NULL; |
| } |
| |
| WMA_LOGD("%s: vdev_id %d msg %d", __func__, vdev_id, msg_type); |
| req->vdev_id = vdev_id; |
| req->msg_type = msg_type; |
| req->type = type; |
| req->user_data = params; |
| vos_timer_init(&req->event_timeout, VOS_TIMER_TYPE_SW, |
| wma_vdev_resp_timer, req); |
| vos_timer_start(&req->event_timeout, timeout); |
| adf_os_spin_lock_bh(&wma->vdev_respq_lock); |
| list_add_tail(&req->node, &wma->vdev_resp_queue); |
| adf_os_spin_unlock_bh(&wma->vdev_respq_lock); |
| return req; |
| } |
| |
| void wma_remove_vdev_req(tp_wma_handle wma, u_int8_t vdev_id, |
| u_int8_t type) |
| { |
| struct wma_target_req *req_msg; |
| |
| req_msg = wma_find_vdev_req(wma, vdev_id, type); |
| if (!req_msg) |
| return; |
| |
| vos_timer_stop(&req_msg->event_timeout); |
| vos_timer_destroy(&req_msg->event_timeout); |
| adf_os_mem_free(req_msg); |
| } |
| |
| /* function : wma_roam_preauth_chan_set |
| * Description: Send a single channel passive scan request |
| * to handle set_channel operation for preauth |
| * Args: |
| * Returns : |
| */ |
| VOS_STATUS wma_roam_preauth_chan_set(tp_wma_handle wma_handle, |
| tpSwitchChannelParams params, u_int8_t vdev_id) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| tSirScanOffloadReq scan_req; |
| u_int8_t bssid[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; |
| |
| WMA_LOGI("%s: channel %d", __func__, params->channelNumber); |
| |
| /* Check for prior operation in progress */ |
| if (wma_handle->roam_preauth_chan_context != NULL) { |
| vos_status = VOS_STATUS_E_FAILURE; |
| WMA_LOGE("%s: Rejected request. Previous operation in progress", __func__); |
| goto send_resp; |
| } |
| wma_handle->roam_preauth_chan_context = params; |
| |
| /* Prepare a dummy scan request and get the |
| * wmi_start_scan_cmd_fixed_param structure filled properly |
| */ |
| vos_mem_zero(&scan_req, sizeof(scan_req)); |
| vos_copy_macaddr((v_MACADDR_t *) &scan_req.bssId, (v_MACADDR_t *)bssid); |
| vos_copy_macaddr((v_MACADDR_t *)&scan_req.selfMacAddr, (v_MACADDR_t *)¶ms->selfStaMacAddr); |
| scan_req.channelList.numChannels = 1; |
| scan_req.channelList.channelNumber[0] = params->channelNumber; |
| scan_req.numSsid = 0; |
| scan_req.minChannelTime = WMA_ROAM_PREAUTH_SCAN_TIME; |
| scan_req.maxChannelTime = WMA_ROAM_PREAUTH_SCAN_TIME; |
| scan_req.scanType = eSIR_PASSIVE_SCAN; |
| scan_req.p2pScanType = P2P_SCAN_TYPE_LISTEN; |
| scan_req.sessionId = vdev_id; |
| wma_handle->roam_preauth_chanfreq = vos_chan_to_freq(params->channelNumber); |
| |
| /* set the state in advance before calling wma_start_scan and be ready |
| * to handle scan events from firmware. Otherwise print statments |
| * in wma_start_can create a race condition. |
| */ |
| wma_handle->roam_preauth_scan_state = WMA_ROAM_PREAUTH_CHAN_REQUESTED; |
| vos_status = wma_start_scan(wma_handle, &scan_req, WDA_CHNL_SWITCH_REQ); |
| |
| if (vos_status == VOS_STATUS_SUCCESS) |
| return vos_status; |
| wma_handle->roam_preauth_scan_state = WMA_ROAM_PREAUTH_CHAN_NONE; |
| /* Failed operation. Safely clear context */ |
| wma_handle->roam_preauth_chan_context = NULL; |
| |
| send_resp: |
| WMA_LOGI("%s: sending WDA_SWITCH_CHANNEL_RSP, status = 0x%x", |
| __func__, vos_status); |
| params->chainMask = wma_handle->pdevconfig.txchainmask; |
| params->smpsMode = SMPS_MODE_DISABLED; |
| params->status = vos_status; |
| wma_send_msg(wma_handle, WDA_SWITCH_CHANNEL_RSP, (void *)params, 0); |
| return vos_status; |
| } |
| |
| VOS_STATUS wma_roam_preauth_chan_cancel(tp_wma_handle wma_handle, |
| tpSwitchChannelParams params, u_int8_t vdev_id) |
| { |
| tAbortScanParams abort_scan_req; |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| |
| WMA_LOGI("%s: channel %d", __func__, params->channelNumber); |
| /* Check for prior operation in progress */ |
| if (wma_handle->roam_preauth_chan_context != NULL) { |
| vos_status = VOS_STATUS_E_FAILURE; |
| WMA_LOGE("%s: Rejected request. Previous operation in progress", __func__); |
| goto send_resp; |
| } |
| wma_handle->roam_preauth_chan_context = params; |
| |
| abort_scan_req.SessionId = vdev_id; |
| wma_handle->roam_preauth_scan_state = WMA_ROAM_PREAUTH_CHAN_CANCEL_REQUESTED; |
| vos_status = wma_stop_scan(wma_handle, &abort_scan_req); |
| if (vos_status == VOS_STATUS_SUCCESS) |
| return vos_status; |
| /* Failed operation. Safely clear context */ |
| wma_handle->roam_preauth_chan_context = NULL; |
| |
| send_resp: |
| WMA_LOGI("%s: sending WDA_SWITCH_CHANNEL_RSP, status = 0x%x", |
| __func__, vos_status); |
| params->chainMask = wma_handle->pdevconfig.txchainmask; |
| params->smpsMode = SMPS_MODE_DISABLED; |
| params->status = vos_status; |
| wma_send_msg(wma_handle, WDA_SWITCH_CHANNEL_RSP, (void *)params, 0); |
| return vos_status; |
| } |
| |
| static void wma_roam_preauth_scan_event_handler(tp_wma_handle wma_handle, |
| u_int8_t vdev_id, wmi_scan_event_fixed_param *wmi_event) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| tSwitchChannelParams *params; |
| |
| WMA_LOGI("%s: preauth_scan_state %d, event 0x%x, reason 0x%x", |
| __func__, wma_handle->roam_preauth_scan_state, |
| wmi_event->event, wmi_event->reason); |
| switch(wma_handle->roam_preauth_scan_state) { |
| case WMA_ROAM_PREAUTH_CHAN_REQUESTED: |
| if (wmi_event->event & WMI_SCAN_EVENT_FOREIGN_CHANNEL) { |
| /* complete set_chan request */ |
| wma_handle->roam_preauth_scan_state = WMA_ROAM_PREAUTH_ON_CHAN; |
| vos_status = VOS_STATUS_SUCCESS; |
| } else if (wmi_event->event & WMI_SCAN_FINISH_EVENTS){ |
| /* Failed to get preauth channel or finished (unlikely) */ |
| wma_handle->roam_preauth_scan_state = WMA_ROAM_PREAUTH_CHAN_NONE; |
| vos_status = VOS_STATUS_E_FAILURE; |
| } else |
| return; |
| break; |
| case WMA_ROAM_PREAUTH_CHAN_CANCEL_REQUESTED: |
| /* Completed or cancelled, complete set_chan cancel request */ |
| wma_handle->roam_preauth_scan_state = WMA_ROAM_PREAUTH_CHAN_NONE; |
| break; |
| |
| case WMA_ROAM_PREAUTH_ON_CHAN: |
| if ((wmi_event->event & WMI_SCAN_EVENT_BSS_CHANNEL) || |
| (wmi_event->event & WMI_SCAN_FINISH_EVENTS)) |
| wma_handle->roam_preauth_scan_state = WMA_ROAM_PREAUTH_CHAN_COMPLETED; |
| |
| /* There is no WDA request to complete. Next set channel request will |
| * look at this state and complete it. |
| */ |
| break; |
| default: |
| WMA_LOGE("%s: unhandled event 0x%x, reason 0x%x", |
| __func__, wmi_event->event, wmi_event->reason); |
| return; |
| } |
| |
| if((params = (tpSwitchChannelParams) wma_handle->roam_preauth_chan_context)) { |
| WMA_LOGI("%s: sending WDA_SWITCH_CHANNEL_RSP, status = 0x%x", |
| __func__, vos_status); |
| params->chainMask = wma_handle->pdevconfig.txchainmask; |
| params->smpsMode = SMPS_MODE_DISABLED; |
| params->status = vos_status; |
| wma_send_msg(wma_handle, WDA_SWITCH_CHANNEL_RSP, (void *)params, 0); |
| wma_handle->roam_preauth_chan_context = NULL; |
| } |
| |
| } |
| |
| void wma_roam_preauth_ind(tp_wma_handle wma_handle, u_int8_t *buf) { |
| wmi_scan_event_fixed_param *wmi_event = NULL; |
| u_int8_t vdev_id; |
| |
| wmi_event = (wmi_scan_event_fixed_param *)buf; |
| if (wmi_event == NULL) { |
| WMA_LOGE("%s: Invalid param wmi_event is null", __func__); |
| return; |
| } |
| |
| vdev_id = wmi_event->vdev_id; |
| if (vdev_id >= wma_handle->max_bssid) { |
| WMA_LOGE("%s: Invalid vdev_id %d wmi_event %pK", __func__, |
| vdev_id, wmi_event); |
| return; |
| } |
| |
| wma_roam_preauth_scan_event_handler(wma_handle, vdev_id, wmi_event); |
| return; |
| } |
| |
| /* |
| * wma_set_channel |
| * If this request is called when station is connected, it should use |
| */ |
| static void wma_set_channel(tp_wma_handle wma, tpSwitchChannelParams params) |
| { |
| struct wma_vdev_start_req req; |
| struct wma_target_req *msg; |
| VOS_STATUS status = VOS_STATUS_SUCCESS; |
| u_int8_t vdev_id, peer_id; |
| ol_txrx_peer_handle peer; |
| ol_txrx_pdev_handle pdev; |
| struct wma_txrx_node *intr = wma->interfaces; |
| uint16_t beacon_interval_ori; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| if (!wma_find_vdev_by_addr(wma, params->selfStaMacAddr, &vdev_id)) { |
| WMA_LOGP("%s: Failed to find vdev id for %pM", |
| __func__, params->selfStaMacAddr); |
| status = VOS_STATUS_E_FAILURE; |
| goto send_resp; |
| } |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to get pdev", __func__); |
| status = VOS_STATUS_E_FAILURE; |
| goto send_resp; |
| } |
| |
| peer = ol_txrx_find_peer_by_addr(pdev, intr[vdev_id].bssid, &peer_id); |
| |
| /* |
| * Roam offload feature is currently supported |
| * only in STA mode. Other modes still require |
| * to issue a Vdev Start/Vdev Restart for |
| * channel change. |
| */ |
| if (((wma->interfaces[vdev_id].type == WMI_VDEV_TYPE_STA) && |
| (wma->interfaces[vdev_id].sub_type == 0)) && |
| !wma->interfaces[vdev_id].is_channel_switch) { |
| |
| if (peer && (peer->state == ol_txrx_peer_state_conn || |
| peer->state == ol_txrx_peer_state_auth)) { |
| /* Trying to change channel while connected |
| * should not invoke VDEV_START. |
| * Instead, use start scan command in passive |
| * mode to park station on that channel |
| */ |
| WMA_LOGI("%s: calling set_scan, state 0x%x", |
| __func__, wma->roam_preauth_scan_state); |
| if (wma->roam_preauth_scan_state == |
| WMA_ROAM_PREAUTH_CHAN_NONE) { |
| /* Is channel change required? |
| */ |
| if(wma_is_mcc_starting(wma, |
| vos_chan_to_freq(params->channelNumber))) |
| { |
| status = wma_roam_preauth_chan_set(wma, |
| params, vdev_id); |
| /* response will be asynchronous */ |
| return; |
| } |
| } else if (wma->roam_preauth_scan_state == |
| WMA_ROAM_PREAUTH_CHAN_REQUESTED || |
| wma->roam_preauth_scan_state == WMA_ROAM_PREAUTH_ON_CHAN) { |
| status = wma_roam_preauth_chan_cancel(wma, params, vdev_id); |
| /* response will be asynchronous */ |
| return; |
| } else if (wma->roam_preauth_scan_state == |
| WMA_ROAM_PREAUTH_CHAN_COMPLETED) { |
| /* Already back on home channel. Complete the request */ |
| wma->roam_preauth_scan_state = WMA_ROAM_PREAUTH_CHAN_NONE; |
| status = VOS_STATUS_SUCCESS; |
| } |
| goto send_resp; |
| } |
| } |
| vos_mem_zero(&req, sizeof(req)); |
| req.vdev_id = vdev_id; |
| msg = wma_fill_vdev_req(wma, req.vdev_id, WDA_CHNL_SWITCH_REQ, |
| WMA_TARGET_REQ_TYPE_VDEV_START, params, |
| WMA_VDEV_START_REQUEST_TIMEOUT); |
| if (!msg) { |
| WMA_LOGP("%s: Failed to fill channel switch request for vdev %d", |
| __func__, req.vdev_id); |
| status = VOS_STATUS_E_NOMEM; |
| goto send_resp; |
| } |
| req.chan = params->channelNumber; |
| req.channelwidth = params->channelwidth; |
| |
| if (params->channelwidth == CH_WIDTH_10MHZ) |
| req.is_half_rate = 1; |
| else if (params->channelwidth == CH_WIDTH_5MHZ) |
| req.is_quarter_rate = 1; |
| |
| req.chan_offset = params->secondaryChannelOffset; |
| req.vht_capable = params->vhtCapable; |
| req.dot11_mode = params->dot11_mode; |
| #ifdef WLAN_FEATURE_VOWIFI |
| req.max_txpow = params->maxTxPower; |
| #else |
| req.max_txpow = params->localPowerConstraint; |
| #endif |
| req.beacon_intval = 100; |
| req.dtim_period = 1; |
| req.is_dfs = params->isDfsChannel; |
| |
| /* In case of AP mode, once radar is detected, we need to |
| * issuse VDEV RESTART, so we making is_channel_switch as |
| * TRUE |
| */ |
| if ((wma_is_vdev_in_ap_mode(wma, req.vdev_id) == true) || |
| params->restart_on_chan_switch == VOS_TRUE) |
| wma->interfaces[req.vdev_id].is_channel_switch = VOS_TRUE; |
| |
| if ((wma_is_vdev_in_ap_mode(wma, req.vdev_id) == true)) { |
| if (params->reduced_beacon_interval) { |
| /* Reduce the beacon interval just before the channel switch. |
| * This would help in reducing the downtime on the STA side |
| * (which is waiting for beacons from the AP to resume back |
| * transmission). Switch back the beacon_interval to its |
| * original value after the channel switch based on the |
| * timeout. This would ensure there are atleast some beacons |
| * sent with increased frequency. |
| */ |
| |
| WMA_LOGD("%s: Changing beacon interval to %d", |
| __func__, params->reduced_beacon_interval); |
| |
| /* Add a timer to reset the beacon interval back*/ |
| beacon_interval_ori = req.beacon_intval; |
| req.beacon_intval = params->reduced_beacon_interval; |
| if (wma_fill_beacon_interval_reset_req(wma, |
| req.vdev_id, |
| beacon_interval_ori, |
| RESET_BEACON_INTERVAL_TIMEOUT)) { |
| |
| WMA_LOGD("%s: Failed to fill beacon" |
| " interval reset req", __func__); |
| } |
| } |
| } |
| |
| if ((VOS_MONITOR_MODE == vos_get_conparam()) && wma_is_vdev_up(0)) { |
| status = wma_switch_channel(wma, &req); |
| if (status != VOS_STATUS_SUCCESS) |
| WMA_LOGE("%s: wma_switch_channel failed %d\n", __func__, |
| status); |
| return; |
| } else { |
| |
| status = wma_vdev_start(wma, &req, |
| wma->interfaces[req.vdev_id].is_channel_switch); |
| if (status != VOS_STATUS_SUCCESS) { |
| wma_remove_vdev_req(wma, req.vdev_id, |
| WMA_TARGET_REQ_TYPE_VDEV_START); |
| WMA_LOGP("%s: vdev start failed status = %d", __func__, |
| status); |
| goto send_resp; |
| } |
| return; |
| } |
| send_resp: |
| WMA_LOGD("%s: channel %d offset %d txpower %d status %d", __func__, |
| params->channelNumber, params->secondaryChannelOffset, |
| #ifdef WLAN_FEATURE_VOWIFI |
| params->maxTxPower, |
| #else |
| params->localPowerConstraint, |
| #endif |
| status); |
| params->status = status; |
| WMA_LOGI("%s: sending WDA_SWITCH_CHANNEL_RSP, status = 0x%x", |
| __func__, status); |
| wma_send_msg(wma, WDA_SWITCH_CHANNEL_RSP, (void *)params, 0); |
| } |
| |
| static WLAN_PHY_MODE wma_peer_phymode(tSirNwType nw_type, u_int8_t sta_type, |
| u_int8_t is_ht, u_int8_t is_cw40, u_int8_t is_vht, u_int8_t is_cw_vht) |
| { |
| WLAN_PHY_MODE phymode = MODE_UNKNOWN; |
| |
| switch (nw_type) { |
| case eSIR_11B_NW_TYPE: |
| if (is_vht) { |
| if (is_cw_vht) |
| phymode = MODE_11AC_VHT80; |
| else |
| phymode = (is_cw40) ? |
| MODE_11AC_VHT40 : |
| MODE_11AC_VHT20; |
| } |
| else if (is_ht) { |
| phymode = (is_cw40) ? |
| MODE_11NG_HT40 : MODE_11NG_HT20; |
| } else |
| phymode = MODE_11B; |
| break; |
| case eSIR_11G_NW_TYPE: |
| if (is_vht) { |
| if (is_cw_vht) |
| phymode = MODE_11AC_VHT80; |
| else |
| phymode = (is_cw40) ? |
| MODE_11AC_VHT40 : |
| MODE_11AC_VHT20; |
| } |
| else if (is_ht) { |
| phymode = (is_cw40) ? |
| MODE_11NG_HT40 : |
| MODE_11NG_HT20; |
| } else |
| phymode = MODE_11G; |
| break; |
| case eSIR_11A_NW_TYPE: |
| if (is_vht) { |
| if (is_cw_vht) |
| phymode = MODE_11AC_VHT80; |
| else |
| phymode = (is_cw40) ? |
| MODE_11AC_VHT40 : |
| MODE_11AC_VHT20; |
| } |
| else if (is_ht) { |
| phymode = (is_cw40) ? |
| MODE_11NA_HT40 : |
| MODE_11NA_HT20; |
| } else |
| phymode = MODE_11A; |
| break; |
| default: |
| WMA_LOGP("%s: Invalid nw type %d", __func__, nw_type); |
| break; |
| } |
| WMA_LOGD("%s: nw_type %d is_ht %d is_cw40 %d is_vht %d is_cw_vht %d phymode %d", |
| __func__, nw_type, is_ht, is_cw40, is_vht, is_cw_vht, phymode); |
| |
| return phymode; |
| } |
| |
| static int32_t wmi_unified_send_txbf(tp_wma_handle wma, |
| tpAddStaParams params) |
| { |
| wmi_vdev_txbf_en txbf_en = {0}; |
| |
| /* |
| * This is set when Other partner is Bformer |
| * and we are capable bformee(enabled both in ini and fw) |
| */ |
| txbf_en.sutxbfee = params->vhtTxBFCapable; |
| txbf_en.mutxbfee = params->vhtTxMUBformeeCapable; |
| |
| /* When MU TxBfee is set, SU TxBfee must be set by default */ |
| if (txbf_en.mutxbfee) |
| txbf_en.sutxbfee = txbf_en.mutxbfee; |
| |
| WMA_LOGD("txbf_en.sutxbfee %d txbf_en.mutxbfee %d", |
| txbf_en.sutxbfee, txbf_en.mutxbfee); |
| |
| return(wmi_unified_vdev_set_param_send(wma->wmi_handle, |
| params->smesessionId, WMI_VDEV_PARAM_TXBF, |
| *((A_UINT8 *)&txbf_en))); |
| } |
| |
| static void wma_update_txrx_chainmask(int num_rf_chains, int *cmd_value) |
| { |
| if (*cmd_value > WMA_MAX_RF_CHAINS(num_rf_chains)) { |
| WMA_LOGE("%s: Chainmask value exceeds the maximum" |
| " supported range setting it to" |
| " maximum value. Requested value %d" |
| " Updated value %d", __func__, *cmd_value, |
| WMA_MAX_RF_CHAINS(num_rf_chains)); |
| *cmd_value = WMA_MAX_RF_CHAINS(num_rf_chains); |
| } else if (*cmd_value < WMA_MIN_RF_CHAINS) { |
| WMA_LOGE("%s: Chainmask value is less than the minimum" |
| " supported range setting it to" |
| " minimum value. Requested value %d" |
| " Updated value %d", __func__, *cmd_value, |
| WMA_MIN_RF_CHAINS); |
| *cmd_value = WMA_MIN_RF_CHAINS; |
| } |
| } |
| |
| #define CFG_CTRL_MASK 0xFF00 |
| #define CFG_DATA_MASK 0x00FF |
| |
| /** |
| * wma_mask_tx_ht_rate() - mask tx ht rate based on config |
| * @wma: wma handle |
| * @mcs_set mcs set buffer |
| * |
| * Return: None |
| */ |
| static void wma_mask_tx_ht_rate(tp_wma_handle wma, uint8_t *mcs_set) |
| { |
| uint32_t mcs_limit, i, j; |
| uint8_t *rate_pos = mcs_set; |
| |
| /* |
| * Get MCS limit from ini configure, and map it to rate parameters |
| * This will limit HT rate upper bound. CFG_CTRL_MASK is used to |
| * check whether ini config is enabled and CFG_DATA_MASK to get the |
| * MCS value. |
| */ |
| if (wlan_cfgGetInt(wma->mac_context, WNI_CFG_MAX_HT_MCS_TX_DATA, |
| &mcs_limit) != eSIR_SUCCESS) { |
| mcs_limit = WNI_CFG_MAX_HT_MCS_TX_DATA_STADEF; |
| } |
| |
| if (mcs_limit & CFG_CTRL_MASK) { |
| WMA_LOGD("%s: set mcs_limit %x", __func__, mcs_limit); |
| |
| mcs_limit &= CFG_DATA_MASK; |
| for (i = 0, j = 0; i < MAX_SUPPORTED_RATES;) { |
| if (j < mcs_limit / 8) { |
| rate_pos[j] = 0xff; |
| j++; |
| i += 8; |
| } else if (j < mcs_limit / 8 + 1) { |
| if (i <= mcs_limit) |
| rate_pos[i / 8] |= 1 << (i % 8); |
| else |
| rate_pos[i / 8] &= ~(1 << (i % 8)); |
| i++; |
| |
| if (i >= (j + 1) * 8) |
| j++; |
| } else { |
| rate_pos[j++] = 0; |
| i += 8; |
| } |
| } |
| } |
| } |
| |
| static int32_t wmi_unified_send_peer_assoc(tp_wma_handle wma, |
| tSirNwType nw_type, |
| tpAddStaParams params) |
| { |
| ol_txrx_pdev_handle pdev; |
| wmi_peer_assoc_complete_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len; |
| int32_t ret, max_rates, i; |
| u_int8_t rx_stbc, tx_stbc; |
| u_int8_t *rate_pos, *buf_ptr; |
| wmi_rate_set peer_legacy_rates, peer_ht_rates; |
| wmi_vht_rate_set *mcs; |
| u_int32_t num_peer_legacy_rates; |
| u_int32_t num_peer_ht_rates; |
| u_int32_t num_peer_11b_rates=0; |
| u_int32_t num_peer_11a_rates=0; |
| u_int32_t phymode; |
| u_int32_t peer_nss=1; |
| u_int32_t disable_abg_rate; |
| struct wma_txrx_node *intr = NULL; |
| |
| if (NULL == params) { |
| WMA_LOGE("%s: params is NULL", __func__); |
| return -EINVAL; |
| } |
| intr = &wma->interfaces[params->smesessionId]; |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to get pdev", __func__); |
| return -EINVAL; |
| } |
| |
| wma_mask_tx_ht_rate(wma, params->supportedRates.supportedMCSSet); |
| |
| vos_mem_zero(&peer_legacy_rates, sizeof(wmi_rate_set)); |
| vos_mem_zero(&peer_ht_rates, sizeof(wmi_rate_set)); |
| |
| phymode = wma_peer_phymode(nw_type, params->staType, |
| params->htCapable, |
| params->txChannelWidthSet, |
| params->vhtCapable, |
| params->vhtTxChannelWidthSet); |
| |
| if (wlan_cfgGetInt(wma->mac_context, |
| WNI_CFG_DISABLE_ABG_RATE_FOR_TX_DATA, |
| &disable_abg_rate) != eSIR_SUCCESS) |
| disable_abg_rate = WNI_CFG_DISABLE_ABG_RATE_FOR_TX_DATA_STADEF; |
| |
| if (!disable_abg_rate) { |
| /* Legacy Rateset */ |
| rate_pos = (u_int8_t *) peer_legacy_rates.rates; |
| for (i = 0; i < SIR_NUM_11B_RATES; i++) { |
| if (!params->supportedRates.llbRates[i]) |
| continue; |
| rate_pos[peer_legacy_rates.num_rates++] = |
| params->supportedRates.llbRates[i]; |
| num_peer_11b_rates++; |
| } |
| for (i = 0; i < SIR_NUM_11A_RATES; i++) { |
| if (!params->supportedRates.llaRates[i]) |
| continue; |
| rate_pos[peer_legacy_rates.num_rates++] = |
| params->supportedRates.llaRates[i]; |
| num_peer_11a_rates++; |
| } |
| } |
| |
| if ((phymode == MODE_11A && num_peer_11a_rates == 0) || |
| (phymode == MODE_11B && num_peer_11b_rates == 0)) { |
| WMA_LOGW("%s: Invalid phy rates. phymode 0x%x," |
| "11b_rates %d, 11a_rates %d", |
| __func__, phymode, |
| num_peer_11b_rates, |
| num_peer_11a_rates); |
| return -EINVAL; |
| } |
| /* Set the Legacy Rates to Word Aligned */ |
| num_peer_legacy_rates = roundup(peer_legacy_rates.num_rates, |
| sizeof(u_int32_t)); |
| |
| /* HT Rateset */ |
| max_rates = sizeof(peer_ht_rates.rates) / |
| sizeof(peer_ht_rates.rates[0]); |
| rate_pos = (u_int8_t *) peer_ht_rates.rates; |
| for (i = 0; i < MAX_SUPPORTED_RATES; i++) { |
| if (params->supportedRates.supportedMCSSet[i / 8] & |
| (1 << (i % 8))) { |
| rate_pos[peer_ht_rates.num_rates++] = i; |
| if (i >= 8) { |
| /* MCS8 or higher rate is present, must be 2x2 */ |
| peer_nss = 2; |
| } |
| } |
| if (peer_ht_rates.num_rates == max_rates) |
| break; |
| } |
| |
| if (params->htCapable && !peer_ht_rates.num_rates) { |
| u_int8_t temp_ni_rates[8] = {0x0, 0x1, 0x2, 0x3, |
| 0x4, 0x5, 0x6, 0x7}; |
| /* |
| * Workaround for EV 116382: The peer is marked HT but with |
| * supported rx mcs set is set to 0. 11n spec mandates MCS0-7 |
| * for a HT STA. So forcing the supported rx mcs rate to |
| * MCS 0-7. This workaround will be removed once we get |
| * clarification from WFA regarding this STA behavior. |
| */ |
| |
| /* TODO: Do we really need this? */ |
| WMA_LOGW("Peer is marked as HT capable but supported mcs rate is 0"); |
| peer_ht_rates.num_rates = sizeof(temp_ni_rates); |
| vos_mem_copy((u_int8_t *) peer_ht_rates.rates, temp_ni_rates, |
| peer_ht_rates.num_rates); |
| } |
| |
| /* Set the Peer HT Rates to Word Aligned */ |
| num_peer_ht_rates = roundup(peer_ht_rates.num_rates, |
| sizeof(u_int32_t)); |
| |
| len = sizeof(*cmd) + |
| WMI_TLV_HDR_SIZE + /* Place holder for peer legacy rate array */ |
| (num_peer_legacy_rates * sizeof(u_int8_t)) + /* peer legacy rate array size */ |
| WMI_TLV_HDR_SIZE + /* Place holder for peer Ht rate array */ |
| (num_peer_ht_rates * sizeof(u_int8_t)) + /* peer HT rate array size */ |
| sizeof(wmi_vht_rate_set); |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_peer_assoc_complete_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_peer_assoc_complete_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_peer_assoc_complete_cmd_fixed_param)); |
| |
| /* in ap/ibss mode and for tdls peer, use mac address of the peer in |
| * the other end as the new peer address; in sta mode, use bss id to |
| * be the new peer address |
| */ |
| if ((wma_is_vdev_in_ap_mode(wma, params->smesessionId)) |
| #ifdef QCA_IBSS_SUPPORT |
| || (wma_is_vdev_in_ibss_mode(wma, params->smesessionId)) |
| #endif |
| #ifdef FEATURE_WLAN_TDLS |
| || (STA_ENTRY_TDLS_PEER == params->staType) |
| #endif |
| ) |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(params->staMac, &cmd->peer_macaddr); |
| else |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(params->bssId, &cmd->peer_macaddr); |
| cmd->vdev_id = params->smesessionId; |
| cmd->peer_new_assoc = 1; |
| cmd->peer_associd = params->assocId; |
| |
| /* |
| * The target only needs a subset of the flags maintained in the host. |
| * Just populate those flags and send it down |
| */ |
| cmd->peer_flags = 0; |
| |
| if (params->wmmEnabled) |
| cmd->peer_flags |= WMI_PEER_QOS; |
| |
| if (params->uAPSD) { |
| cmd->peer_flags |= WMI_PEER_APSD; |
| WMA_LOGD("Set WMI_PEER_APSD: uapsd Mask %d", params->uAPSD); |
| } |
| |
| if (params->htCapable) { |
| cmd->peer_flags |= (WMI_PEER_HT | WMI_PEER_QOS); |
| cmd->peer_rate_caps |= WMI_RC_HT_FLAG; |
| |
| if (params->txChannelWidthSet) { |
| cmd->peer_flags |= WMI_PEER_40MHZ; |
| cmd->peer_rate_caps |= WMI_RC_CW40_FLAG; |
| if (params->fShortGI40Mhz) |
| cmd->peer_rate_caps |= WMI_RC_SGI_FLAG; |
| } else if (params->fShortGI20Mhz) { |
| cmd->peer_rate_caps |= WMI_RC_SGI_FLAG; |
| } |
| } |
| |
| #ifdef WLAN_FEATURE_11AC |
| if (params->vhtCapable) { |
| cmd->peer_flags |= (WMI_PEER_HT | WMI_PEER_VHT | WMI_PEER_QOS); |
| cmd->peer_rate_caps |= WMI_RC_HT_FLAG; |
| } |
| |
| if (params->vhtTxChannelWidthSet) |
| cmd->peer_flags |= WMI_PEER_80MHZ; |
| |
| cmd->peer_vht_caps = params->vht_caps; |
| #endif |
| |
| if (params->p2pCapableSta) |
| cmd->peer_flags |= WMI_PEER_IS_P2P_CAPABLE; |
| |
| if (params->rmfEnabled) |
| cmd->peer_flags |= WMI_PEER_PMF; |
| |
| rx_stbc = (params->ht_caps & IEEE80211_HTCAP_C_RXSTBC) >> |
| IEEE80211_HTCAP_C_RXSTBC_S; |
| if (rx_stbc) { |
| cmd->peer_flags |= WMI_PEER_STBC; |
| cmd->peer_rate_caps |= (rx_stbc << WMI_RC_RX_STBC_FLAG_S); |
| } |
| |
| tx_stbc = (params->ht_caps & IEEE80211_HTCAP_C_TXSTBC) >> |
| IEEE80211_HTCAP_C_TXSTBC_S; |
| if (tx_stbc) { |
| cmd->peer_flags |= WMI_PEER_STBC; |
| cmd->peer_rate_caps |= (tx_stbc << WMI_RC_TX_STBC_FLAG_S); |
| } |
| |
| if (params->htLdpcCapable || params->vhtLdpcCapable) |
| cmd->peer_flags |= WMI_PEER_LDPC; |
| |
| switch (params->mimoPS) { |
| case eSIR_HT_MIMO_PS_STATIC: |
| cmd->peer_flags |= WMI_PEER_STATIC_MIMOPS; |
| break; |
| case eSIR_HT_MIMO_PS_DYNAMIC: |
| cmd->peer_flags |= WMI_PEER_DYN_MIMOPS; |
| break; |
| case eSIR_HT_MIMO_PS_NO_LIMIT: |
| cmd->peer_flags |= WMI_PEER_SPATIAL_MUX; |
| break; |
| default: |
| break; |
| } |
| |
| #ifdef FEATURE_WLAN_TDLS |
| if (STA_ENTRY_TDLS_PEER == params->staType) |
| cmd->peer_flags |= WMI_PEER_AUTH; |
| #endif |
| |
| if (params->wpa_rsn |
| #ifdef FEATURE_WLAN_WAPI |
| || params->encryptType == eSIR_ED_WPI |
| #endif |
| ) |
| cmd->peer_flags |= WMI_PEER_NEED_PTK_4_WAY; |
| if (params->wpa_rsn >> 1) |
| cmd->peer_flags |= WMI_PEER_NEED_GTK_2_WAY; |
| |
| #if defined(CONFIG_HL_SUPPORT) && defined(FEATURE_WLAN_TDLS) |
| if (STA_ENTRY_TDLS_PEER == params->staType) |
| ol_txrx_peer_state_update(pdev, params->staMac, ol_txrx_peer_state_auth); |
| else |
| ol_txrx_peer_state_update(pdev, params->bssId, ol_txrx_peer_state_auth); |
| #else |
| ol_txrx_peer_state_update(pdev, params->bssId, ol_txrx_peer_state_auth); |
| #endif |
| |
| #ifdef FEATURE_WLAN_WAPI |
| if (params->encryptType == eSIR_ED_WPI) { |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, |
| params->smesessionId, |
| WMI_VDEV_PARAM_DROP_UNENCRY, |
| FALSE); |
| if (ret) { |
| WMA_LOGE("Set WMI_VDEV_PARAM_DROP_UNENCRY Param status:%d\n", ret); |
| wmi_buf_free(buf); |
| return ret; |
| } |
| } |
| #endif |
| |
| cmd->peer_caps = params->capab_info; |
| cmd->peer_listen_intval = params->listenInterval; |
| cmd->peer_ht_caps = params->ht_caps; |
| cmd->peer_max_mpdu = (1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR + |
| params->maxAmpduSize)) - 1; |
| cmd->peer_mpdu_density = wma_parse_mpdudensity(params->maxAmpduDensity); |
| |
| if (params->supportedRates.supportedMCSSet[1] && |
| params->supportedRates.supportedMCSSet[2]) |
| cmd->peer_rate_caps |= WMI_RC_TS_FLAG; |
| else if (params->supportedRates.supportedMCSSet[1]) |
| cmd->peer_rate_caps |= WMI_RC_DS_FLAG; |
| |
| /* Update peer legacy rate information */ |
| buf_ptr += sizeof(*cmd); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, |
| num_peer_legacy_rates); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| cmd->num_peer_legacy_rates = peer_legacy_rates.num_rates; |
| vos_mem_copy(buf_ptr, peer_legacy_rates.rates, |
| peer_legacy_rates.num_rates); |
| |
| /* Update peer HT rate information */ |
| buf_ptr += num_peer_legacy_rates; |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, |
| num_peer_ht_rates); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| cmd->num_peer_ht_rates = peer_ht_rates.num_rates; |
| vos_mem_copy(buf_ptr, peer_ht_rates.rates, |
| peer_ht_rates.num_rates); |
| |
| /* VHT Rates */ |
| buf_ptr += num_peer_ht_rates; |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_STRUC_wmi_vht_rate_set, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_vht_rate_set)); |
| |
| cmd->peer_nss = peer_nss; |
| |
| WMA_LOGD("peer_nss %d peer_ht_rates.num_rates %d ", cmd->peer_nss, |
| peer_ht_rates.num_rates); |
| |
| mcs = (wmi_vht_rate_set *)buf_ptr; |
| if ( params->vhtCapable) { |
| #define VHT2x2MCSMASK 0xc |
| mcs->rx_max_rate = params->supportedRates.vhtRxHighestDataRate; |
| mcs->rx_mcs_set = params->supportedRates.vhtRxMCSMap; |
| mcs->tx_max_rate = params->supportedRates.vhtTxHighestDataRate; |
| mcs->tx_mcs_set = params->supportedRates.vhtTxMCSMap; |
| |
| if(params->vhtSupportedRxNss) { |
| cmd->peer_nss = params->vhtSupportedRxNss; |
| } else { |
| cmd->peer_nss = ((mcs->rx_mcs_set & VHT2x2MCSMASK) |
| == VHT2x2MCSMASK) ? 1 : 2; |
| } |
| } |
| |
| /* |
| * Limit nss to max number of rf chain supported by target |
| * Otherwise Fw will crash |
| */ |
| wma_update_txrx_chainmask(wma->num_rf_chains, &cmd->peer_nss); |
| |
| intr->nss = cmd->peer_nss; |
| cmd->peer_phymode = phymode; |
| |
| WMA_LOGD("%s: vdev_id %d associd %d peer_flags %x rate_caps %x " |
| "peer_caps %x listen_intval %d ht_caps %x max_mpdu %d " |
| "nss %d phymode %d peer_mpdu_density %d encr_type %d " |
| "cmd->peer_vht_caps %x", __func__, |
| cmd->vdev_id, cmd->peer_associd, cmd->peer_flags, |
| cmd->peer_rate_caps, cmd->peer_caps, |
| cmd->peer_listen_intval, cmd->peer_ht_caps, |
| cmd->peer_max_mpdu, cmd->peer_nss, cmd->peer_phymode, |
| cmd->peer_mpdu_density, params->encryptType, |
| cmd->peer_vht_caps); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_PEER_ASSOC_CMDID); |
| if (ret != EOK) { |
| WMA_LOGP("%s: Failed to send peer assoc command ret = %d", |
| __func__, ret); |
| wmi_buf_free(buf); |
| } |
| return ret; |
| } |
| |
| static int |
| wmi_unified_modem_power_state(wmi_unified_t wmi_handle, u_int32_t param_value) |
| { |
| int ret; |
| wmi_modem_power_state_cmd_param *cmd; |
| wmi_buf_t buf; |
| u_int16_t len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| cmd = (wmi_modem_power_state_cmd_param *)wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_modem_power_state_cmd_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_modem_power_state_cmd_param)); |
| cmd->modem_power_state = param_value; |
| WMA_LOGD("%s: Setting cmd->modem_power_state = %u", __func__, param_value); |
| ret = wmi_unified_cmd_send(wmi_handle, buf, len, |
| WMI_MODEM_POWER_STATE_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE("Failed to send notify cmd ret = %d", ret); |
| wmi_buf_free(buf); |
| } |
| return ret; |
| } |
| |
| VOS_STATUS wma_get_link_speed(WMA_HANDLE handle, |
| tSirLinkSpeedInfo *pLinkSpeed) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| wmi_peer_get_estimated_linkspeed_cmd_fixed_param* cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len; |
| u_int8_t *buf_ptr; |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue get link speed cmd", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| if (!WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_ESTIMATE_LINKSPEED)) { |
| WMA_LOGE("%s: Linkspeed feature bit not enabled" |
| " Sending value 0 as link speed.", |
| __func__); |
| wma_send_link_speed(0); |
| return VOS_STATUS_E_FAILURE; |
| } |
| len = sizeof(wmi_peer_get_estimated_linkspeed_cmd_fixed_param); |
| wmi_buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (u_int8_t *) wmi_buf_data(wmi_buf); |
| |
| cmd = (wmi_peer_get_estimated_linkspeed_cmd_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_peer_get_estimated_linkspeed_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_peer_get_estimated_linkspeed_cmd_fixed_param)); |
| |
| /* Copy the peer macaddress to the wma buffer */ |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(pLinkSpeed->peer_macaddr, &cmd->peer_macaddr); |
| |
| WMA_LOGD("%s: pLinkSpeed->peerMacAddr: %pM, " |
| "peer_macaddr.mac_addr31to0: 0x%x, peer_macaddr.mac_addr47to32: 0x%x", |
| __func__, pLinkSpeed->peer_macaddr, |
| cmd->peer_macaddr.mac_addr31to0, |
| cmd->peer_macaddr.mac_addr47to32); |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, wmi_buf, len, |
| WMI_PEER_GET_ESTIMATED_LINKSPEED_CMDID)) { |
| WMA_LOGE("%s: failed to send link speed command", __func__); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| |
| /** |
| * wma_get_peer_info() - get station's information |
| * @handle: wma interface |
| * @prssi_req: get peer info request information |
| * |
| * This function will send WMI_REQUEST_STATS_CMDID |
| * to wmi |
| * |
| * Return: 0 on success, otherwise error value |
| */ |
| static VOS_STATUS wma_get_peer_info(WMA_HANDLE handle, |
| struct sir_peer_info_req *peer_info_req) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle)handle; |
| wmi_request_stats_cmd_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len; |
| uint8_t *buf_ptr; |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue get rssi", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| len = sizeof(wmi_request_stats_cmd_fixed_param); |
| wmi_buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (uint8_t *)wmi_buf_data(wmi_buf); |
| |
| cmd = (wmi_request_stats_cmd_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_request_stats_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_request_stats_cmd_fixed_param)); |
| |
| cmd->stats_id = WMI_REQUEST_PEER_STAT; |
| cmd->vdev_id = peer_info_req->sessionid; |
| wma_handle->get_sta_peer_info = TRUE; |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, wmi_buf, len, |
| WMI_REQUEST_STATS_CMDID)) { |
| WMA_LOGE("Failed to send host stats request to fw"); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| vos_mem_copy(&(wma_handle->peer_macaddr), |
| &(peer_info_req->peer_macaddr), |
| VOS_MAC_ADDR_SIZE); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| |
| |
| static int |
| wmi_unified_pdev_set_param(wmi_unified_t wmi_handle, WMI_PDEV_PARAM param_id, |
| u_int32_t param_value) |
| { |
| int ret; |
| wmi_pdev_set_param_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| u_int16_t len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| cmd = (wmi_pdev_set_param_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_pdev_set_param_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_pdev_set_param_cmd_fixed_param)); |
| cmd->pdev_id = 0; |
| cmd->param_id = param_id; |
| cmd->param_value = param_value; |
| WMA_LOGD("Setting pdev param = %x, value = %u", |
| param_id, param_value); |
| ret = wmi_unified_cmd_send(wmi_handle, buf, len, |
| WMI_PDEV_SET_PARAM_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE("Failed to send set param command ret = %d", ret); |
| wmi_buf_free(buf); |
| } |
| return ret; |
| } |
| |
| static int32_t wma_txrx_fw_stats_reset(tp_wma_handle wma_handle, |
| uint8_t vdev_id, u_int32_t value) |
| { |
| struct ol_txrx_stats_req req; |
| ol_txrx_vdev_handle vdev; |
| |
| vdev = wma_find_vdev_by_id(wma_handle, vdev_id); |
| if (!vdev) { |
| WMA_LOGE("%s:Invalid vdev handle", __func__); |
| return -EINVAL; |
| } |
| vos_mem_zero(&req, sizeof(req)); |
| req.stats_type_reset_mask = value; |
| ol_txrx_fw_stats_get(vdev, &req, false); |
| |
| return 0; |
| } |
| |
| static int32_t wma_set_txrx_fw_stats_level(tp_wma_handle wma_handle, |
| uint8_t vdev_id, u_int32_t value) |
| { |
| struct ol_txrx_stats_req req; |
| ol_txrx_vdev_handle vdev; |
| |
| vdev = wma_find_vdev_by_id(wma_handle, vdev_id); |
| if (!vdev) { |
| WMA_LOGE("%s:Invalid vdev handle", __func__); |
| return -EINVAL; |
| } |
| vos_mem_zero(&req, sizeof(req)); |
| req.print.verbose = 1; |
| switch (value) { |
| case WMA_FW_PHY_STATS: |
| case WMA_FW_RX_REORDER_STATS: |
| case WMA_FW_RX_RC_STATS: |
| case WMA_FW_TX_PPDU_STATS: |
| req.stats_type_upload_mask = 1 << (value - 1); |
| break; |
| case WMA_FW_TX_CONCISE_STATS: |
| /* |
| * Stats request 5 is the same as stats request 4, |
| * but with only a concise printout. |
| */ |
| req.print.concise = 1; |
| req.stats_type_upload_mask = 1 << (WMA_FW_TX_PPDU_STATS - 1); |
| break; |
| case WMA_FW_TX_RC_STATS: |
| req.stats_type_upload_mask = 1 << (WMA_FW_TX_CONCISE_STATS - 1); |
| break; |
| case WMA_FW_RX_REM_RING_BUF: |
| /* |
| * This part of the code is a bit confusing. |
| * For the statistics command iwpriv wlan0 txrx_fw_stats <n>, |
| * for all n <= 4, there is 1:1 mapping of WMA defined value (n) |
| * with f/w required stats_type_upload_mask. |
| * For n <= 4, stats_type_upload_mask = 1 << (n - 1) |
| * With the introduction of WMA_FW_TX_CONCISE_STATS, |
| * there is a need for special handling, where for n = 5, |
| * stats_type_upload_mask = 1 << (n - 2). |
| * However per current code, there is no way to set the value of |
| * stats_type_upload_mask for n > 5. |
| * In the mean-time for dumping Remote Ring Buffer information, |
| * f/w expects stats_type_upload_mask = 1 << 12. |
| * However going by CLI command arguments, n should be 7. |
| * There seems to be no apparent correlation between 7 & 12. |
| * To fix this properly, one needs to fix the WMA defines |
| * appropriately and always let n have a 1:1 |
| * correspondence with the bitmask expected by f/w. |
| * Do not want to disturb the existing code now, |
| * but extending this code, so that CLI argument "n" has |
| * 1:1 correspondence with f/w bitmask. |
| * With this approach, for remote ring information, |
| * the statistics command should be: |
| * iwpriv wlan0 txrx_fw_stats 12 |
| */ |
| /* FIXME : Fix all the values in the appropriate way. */ |
| req.stats_type_upload_mask = 1 << WMA_FW_RX_REM_RING_BUF; |
| break; |
| case WMA_FW_RX_TXBF_MUSU_NDPA: |
| req.stats_type_upload_mask = 1 << WMA_FW_RX_TXBF_MUSU_NDPA; |
| break; |
| default: |
| WMA_LOGE("Invalid txrx_fw_stats requested id:%d", |
| value); |
| return -EINVAL; |
| } |
| ol_txrx_fw_stats_get(vdev, &req, true); |
| |
| return 0; |
| } |
| |
| static int32_t wma_set_priv_cfg(tp_wma_handle wma_handle, |
| wda_cli_set_cmd_t *privcmd) |
| { |
| int32_t ret = 0; |
| |
| switch (privcmd->param_id) { |
| case WMA_VDEV_TXRX_FWSTATS_ENABLE_CMDID: |
| ret = wma_set_txrx_fw_stats_level(wma_handle, |
| privcmd->param_vdev_id, |
| privcmd->param_value); |
| break; |
| case WMA_VDEV_TXRX_FWSTATS_RESET_CMDID: |
| ret = wma_txrx_fw_stats_reset(wma_handle, |
| privcmd->param_vdev_id, |
| privcmd->param_value); |
| break; |
| case WMI_STA_SMPS_FORCE_MODE_CMDID: |
| ret = wma_set_mimops(wma_handle, privcmd->param_vdev_id, |
| privcmd->param_value); |
| break; |
| case WMI_STA_SMPS_PARAM_CMDID: |
| wma_set_smps_params(wma_handle, privcmd->param_vdev_id, |
| privcmd->param_value); |
| break; |
| case WMA_VDEV_MCC_SET_TIME_LATENCY: |
| { |
| /* Extract first MCC adapter/vdev channel number and latency */ |
| tANI_U8 mcc_channel = privcmd->param_value & 0x000000FF; |
| tANI_U8 mcc_channel_latency = |
| (privcmd->param_value & 0x0000FF00) >> 8; |
| int ret = -1; |
| WMA_LOGD("%s: Parsed input: Channel #1:%d, latency:%dms", |
| __func__, mcc_channel, mcc_channel_latency); |
| ret = wma_set_mcc_channel_time_latency |
| ( |
| wma_handle, |
| mcc_channel, |
| mcc_channel_latency |
| ); |
| } |
| break; |
| case WMA_VDEV_MCC_SET_TIME_QUOTA: |
| { |
| /** Extract the MCC 2 adapters/vdevs channel numbers and time |
| * quota value for the first adapter only (which is specified |
| * in iwpriv command. |
| */ |
| tANI_U8 adapter_2_chan_number = |
| privcmd->param_value & 0x000000FF; |
| tANI_U8 adapter_1_chan_number = |
| (privcmd->param_value & 0x0000FF00) >> 8; |
| tANI_U8 adapter_1_quota = |
| (privcmd->param_value & 0x00FF0000) >> 16; |
| int ret = -1; |
| |
| WMA_LOGD("%s: Parsed input: Channel #1:%d, Channel #2:%d," |
| "quota 1:%dms", __func__, adapter_1_chan_number, |
| adapter_2_chan_number, adapter_1_quota); |
| ret = wma_set_mcc_channel_time_quota |
| ( |
| wma_handle, |
| adapter_1_chan_number, |
| adapter_1_quota, |
| adapter_2_chan_number |
| ); |
| } |
| break; |
| case WMA_VDEV_IBSS_SET_ATIM_WINDOW_SIZE: |
| { |
| wma_handle->wma_ibss_power_save_params.atimWindowLength = |
| privcmd->param_value; |
| WMA_LOGD("%s: IBSS power save ATIM Window = %d", __func__, |
| wma_handle->wma_ibss_power_save_params.atimWindowLength); |
| } |
| break; |
| case WMA_VDEV_IBSS_SET_POWER_SAVE_ALLOWED: |
| { |
| wma_handle->wma_ibss_power_save_params.isPowerSaveAllowed = |
| privcmd->param_value; |
| WMA_LOGD("%s: IBSS is Power Save Allowed = %d", __func__, |
| wma_handle->wma_ibss_power_save_params.isPowerSaveAllowed); |
| } |
| break; |
| case WMA_VDEV_IBSS_SET_POWER_COLLAPSE_ALLOWED: |
| { |
| wma_handle->wma_ibss_power_save_params.isPowerCollapseAllowed = |
| privcmd->param_value; |
| WMA_LOGD("%s: IBSS is Power Collapse Allowed = %d", __func__, |
| wma_handle->wma_ibss_power_save_params.isPowerCollapseAllowed); |
| } |
| break; |
| case WMA_VDEV_IBSS_SET_AWAKE_ON_TX_RX: |
| { |
| wma_handle->wma_ibss_power_save_params.isAwakeonTxRxEnabled = |
| privcmd->param_value; |
| WMA_LOGD("%s: IBSS Power Save Awake on Tx/Rx Enabled = %d", __func__, |
| wma_handle->wma_ibss_power_save_params.isAwakeonTxRxEnabled); |
| } |
| break; |
| case WMA_VDEV_IBSS_SET_INACTIVITY_TIME: |
| { |
| wma_handle->wma_ibss_power_save_params.inactivityCount = |
| privcmd->param_value; |
| WMA_LOGD("%s: IBSS Power Save Data Inactivity Count = %d", __func__, |
| wma_handle->wma_ibss_power_save_params.inactivityCount); |
| } |
| break; |
| case WMA_VDEV_IBSS_SET_TXSP_END_INACTIVITY_TIME: |
| { |
| wma_handle->wma_ibss_power_save_params.txSPEndInactivityTime = |
| privcmd->param_value; |
| WMA_LOGD("%s: IBSS Power Save Transmit EOSP inactivity time out = %d", |
| __func__, |
| wma_handle->wma_ibss_power_save_params.txSPEndInactivityTime); |
| } |
| break; |
| case WMA_VDEV_DFS_CONTROL_CMDID: |
| { |
| struct ieee80211com *dfs_ic = wma_handle->dfs_ic; |
| struct ath_dfs *dfs; |
| |
| if (!dfs_ic) { |
| ret = -ENOENT; |
| } else { |
| if (dfs_ic->ic_curchan) { |
| WMA_LOGD("%s: Debug cmd: %s received on ch: %d", |
| __func__, |
| "WMA_VDEV_DFS_CONTROL_CMDID", |
| dfs_ic->ic_curchan->ic_ieee); |
| |
| if (dfs_ic->ic_curchan->ic_flagext & |
| IEEE80211_CHAN_DFS) { |
| dfs = (struct ath_dfs *)dfs_ic->ic_dfs; |
| dfs->dfs_bangradar = 1; |
| dfs->ath_radar_tasksched = 1; |
| OS_SET_TIMER(&dfs->ath_dfs_task_timer, |
| 0); |
| } else { |
| ret = -ENOENT; |
| } |
| } else { |
| ret = -ENOENT; |
| } |
| } |
| |
| if ( ret == -ENOENT) { |
| WMA_LOGE("%s: Operating channel is not DFS capable, " |
| "ignoring %s", |
| __func__, |
| "WMA_VDEV_DFS_CONTROL_CMDID"); |
| } else if (ret) { |
| WMA_LOGE("%s: Sending command %s failed with %d\n", |
| __func__, |
| "WMA_VDEV_DFS_CONTROL_CMDID", |
| ret); |
| } |
| } |
| break; |
| case WMA_VDEV_IBSS_PS_SET_WARMUP_TIME_SECS: |
| { |
| wma_handle->wma_ibss_power_save_params.ibssPsWarmupTime = |
| privcmd->param_value; |
| WMA_LOGD("%s: IBSS Power Save Warm Up Time in Seconds = %d", |
| __func__, |
| wma_handle->wma_ibss_power_save_params.ibssPsWarmupTime); |
| } |
| break; |
| case WMA_VDEV_IBSS_PS_SET_1RX_CHAIN_IN_ATIM_WINDOW: |
| { |
| wma_handle->wma_ibss_power_save_params.ibssPs1RxChainInAtimEnable = |
| privcmd->param_value; |
| WMA_LOGD("%s: IBSS Power Save single RX Chain Enable In ATIM = %d", |
| __func__, |
| wma_handle->wma_ibss_power_save_params.ibssPs1RxChainInAtimEnable); |
| } |
| break; |
| |
| #ifdef IPA_UC_OFFLOAD |
| case WMA_VDEV_TXRX_GET_IPA_UC_FW_STATS_CMDID: |
| { |
| ol_txrx_pdev_handle pdev; |
| |
| if (vos_is_load_unload_in_progress(VOS_MODULE_ID_WDA, NULL)) { |
| WMA_LOGE("%s: Driver load/unload in progress", __func__); |
| return -EINVAL; |
| } |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, |
| wma_handle->vos_context); |
| if (!pdev) { |
| WMA_LOGE("pdev NULL for uc stat"); |
| return -EINVAL; |
| } |
| ol_txrx_ipa_uc_get_stat(pdev); |
| } |
| break; |
| #endif /* IPA_UC_OFFLOAD */ |
| |
| default: |
| WMA_LOGE("Invalid wma config command id:%d", |
| privcmd->param_id); |
| ret = -EINVAL; |
| } |
| return ret; |
| } |
| |
| static int wmi_crash_inject(wmi_unified_t wmi_handle, u_int32_t type, |
| u_int32_t delay_time_ms) |
| { |
| int ret = 0; |
| WMI_FORCE_FW_HANG_CMD_fixed_param *cmd; |
| u_int16_t len = sizeof(*cmd); |
| wmi_buf_t buf; |
| |
| buf = wmi_buf_alloc(wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed!", __func__); |
| return -ENOMEM; |
| } |
| |
| cmd = (WMI_FORCE_FW_HANG_CMD_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_FORCE_FW_HANG_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(WMI_FORCE_FW_HANG_CMD_fixed_param)); |
| cmd->type = type; |
| cmd->delay_time_ms = delay_time_ms; |
| |
| ret = wmi_unified_cmd_send(wmi_handle, buf, len, WMI_FORCE_FW_HANG_CMDID); |
| if (ret < 0) { |
| WMA_LOGE("%s: Failed to send set param command, ret = %d", |
| __func__, ret); |
| wmi_buf_free(buf); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * wma_crash_inject() - sends command to FW to simulate crash |
| * @wma_handle: pointer of WMA context |
| * @type: subtype of the command |
| * @delay_time_ms: time in milliseconds for FW to delay the crash |
| * |
| * This function will send a command to FW in order to simulate different |
| * kinds of FW crashes. |
| * |
| * Return: 0 for success or reasons for failure |
| */ |
| |
| int wma_crash_inject(tp_wma_handle wma_handle, uint32_t type, |
| uint32_t delay_time_ms) |
| { |
| return wmi_crash_inject(wma_handle->wmi_handle, type, delay_time_ms); |
| } |
| |
| static int32_t wmi_unified_set_sta_ps_param(wmi_unified_t wmi_handle, |
| u_int32_t vdev_id, u_int32_t param, u_int32_t value) |
| { |
| wmi_sta_powersave_param_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len = sizeof(*cmd); |
| tp_wma_handle wma; |
| struct wma_txrx_node *iface; |
| wma = vos_get_context(VOS_MODULE_ID_WDA, |
| vos_get_global_context(VOS_MODULE_ID_WDA, NULL)); |
| if (NULL == wma) { |
| WMA_LOGE("%s: wma is NULL", __func__); |
| return -EIO; |
| } |
| iface = &wma->interfaces[vdev_id]; |
| |
| WMA_LOGD("Set Sta Ps param vdevId %d Param %d val %d", |
| vdev_id, param, value); |
| |
| buf = wmi_buf_alloc(wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: Set Sta Ps param Mem Alloc Failed", __func__); |
| return -ENOMEM; |
| } |
| |
| cmd = (wmi_sta_powersave_param_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_sta_powersave_param_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_sta_powersave_param_cmd_fixed_param)); |
| cmd->vdev_id = vdev_id; |
| cmd->param = param; |
| cmd->value = value; |
| |
| if (wmi_unified_cmd_send(wmi_handle, buf, len, |
| WMI_STA_POWERSAVE_PARAM_CMDID)) { |
| WMA_LOGE("Set Sta Ps param Failed vdevId %d Param %d val %d", |
| vdev_id, param, value); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| #ifdef FEATURE_GREEN_AP |
| static int32_t wmi_unified_pdev_green_ap_ps_enable_cmd(wmi_unified_t wmi_handle, |
| u_int32_t value) |
| { |
| wmi_pdev_green_ap_ps_enable_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len = sizeof(*cmd); |
| |
| WMA_LOGD("Set Green AP PS val %d", value); |
| |
| buf = wmi_buf_alloc(wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: Green AP PS Mem Alloc Failed", __func__); |
| return -ENOMEM; |
| } |
| |
| cmd = (wmi_pdev_green_ap_ps_enable_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_pdev_green_ap_ps_enable_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_pdev_green_ap_ps_enable_cmd_fixed_param)); |
| cmd->pdev_id = 0; |
| cmd->enable = value; |
| |
| if (wmi_unified_cmd_send(wmi_handle, buf, len, |
| WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID)) { |
| WMA_LOGE("Set Green AP PS param Failed val %d", value); |
| |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| /** |
| * wma_egap_info_status_event() - egap info status event |
| * @handle: pointer to wma handler |
| * @event: pointer to event |
| * @len: len of the event |
| * |
| * Return: 0 for success, otherwise appropriate error code |
| */ |
| static int wma_egap_info_status_event(void *handle, u_int8_t *event, |
| uint32_t len) |
| { |
| WMI_TX_PAUSE_EVENTID_param_tlvs *param_buf; |
| wmi_ap_ps_egap_info_event_fixed_param *egap_info_event; |
| wmi_ap_ps_egap_info_chainmask_list *chainmask_event; |
| u_int8_t *buf_ptr; |
| |
| param_buf = (WMI_TX_PAUSE_EVENTID_param_tlvs *)event; |
| if (!param_buf) { |
| WMA_LOGE("Invalid EGAP Info status event buffer"); |
| return -EINVAL; |
| } |
| |
| egap_info_event = (wmi_ap_ps_egap_info_event_fixed_param *) |
| param_buf->fixed_param; |
| buf_ptr = (uint8_t *)egap_info_event; |
| buf_ptr += sizeof(wmi_ap_ps_egap_info_event_fixed_param); |
| chainmask_event = (wmi_ap_ps_egap_info_chainmask_list *)buf_ptr; |
| |
| WMA_LOGI("mac_id: %d, status: %d, tx_mask: %x, rx_mask: %d", |
| chainmask_event->mac_id, |
| egap_info_event->status, |
| chainmask_event->tx_chainmask, |
| chainmask_event->rx_chainmask); |
| return 0; |
| } |
| |
| /** |
| * wma_send_egap_conf_params() - send wmi cmd of egap configuration params |
| * @wma_handle: wma handler |
| * @egap_params: pointer to egap_params |
| * |
| * Return: 0 for success, otherwise appropriate error code |
| */ |
| VOS_STATUS wma_send_egap_conf_params(WMA_HANDLE handle, |
| struct egap_conf_params *egap_params) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| wmi_ap_ps_egap_param_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t err; |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, sizeof(*cmd)); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate buffer to send ap_ps_egap cmd"); |
| return -ENOMEM; |
| } |
| cmd = (wmi_ap_ps_egap_param_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_ap_ps_egap_param_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_ap_ps_egap_param_cmd_fixed_param)); |
| |
| cmd->enable = egap_params->enable; |
| cmd->inactivity_time = egap_params->inactivity_time; |
| cmd->wait_time = egap_params->wait_time; |
| cmd->flags = egap_params->flags; |
| err = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| sizeof(*cmd), WMI_AP_PS_EGAP_PARAM_CMDID); |
| if (err) { |
| WMA_LOGE("Failed to send ap_ps_egap cmd"); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| /** |
| * wma_setup_egap_support() - setup the EGAP support flag |
| * @tgt_cfg: pointer to hdd target configuration |
| * @egap_support: EGAP support flag |
| * |
| * Return: None |
| */ |
| void wma_setup_egap_support(struct hdd_tgt_cfg *tgt_cfg, WMA_HANDLE handle) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| |
| if (tgt_cfg && wma_handle) |
| tgt_cfg->egap_support = wma_handle->egap_support; |
| } |
| |
| /** |
| * wma_register_egap_event_handle() - register the EGAP event handle |
| * @wma_handle: wma handler |
| * |
| * Return: None |
| */ |
| void wma_register_egap_event_handle(WMA_HANDLE handle) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| int status; |
| |
| if (WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_EGAP)) { |
| status = wmi_unified_register_event_handler( |
| wma_handle->wmi_handle, |
| WMI_AP_PS_EGAP_INFO_EVENTID, |
| wma_egap_info_status_event); |
| if (status) { |
| WMA_LOGE("Failed to register Enhance Green AP event"); |
| wma_handle->egap_support = false; |
| } else { |
| WMA_LOGI("Set the Enhance Green AP event handler"); |
| wma_handle->egap_support = true; |
| } |
| } else |
| wma_handle->egap_support = false; |
| } |
| |
| #endif /* FEATURE_GREEN_AP */ |
| |
| static int |
| wmi_unified_vdev_set_gtx_cfg_send(wmi_unified_t wmi_handle, u_int32_t if_id, |
| gtx_config_t *gtx_info) |
| { |
| wmi_vdev_set_gtx_params_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int len = sizeof(wmi_vdev_set_gtx_params_cmd_fixed_param); |
| buf = wmi_buf_alloc(wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __FUNCTION__); |
| return -1; |
| } |
| cmd = (wmi_vdev_set_gtx_params_cmd_fixed_param *)wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_set_gtx_params_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_vdev_set_gtx_params_cmd_fixed_param)); |
| cmd->vdev_id = if_id; |
| |
| cmd->gtxRTMask[0] = gtx_info->gtxRTMask[0]; |
| cmd->gtxRTMask[1] = gtx_info->gtxRTMask[1]; |
| cmd->userGtxMask = gtx_info->gtxUsrcfg; |
| cmd->gtxPERThreshold = gtx_info->gtxPERThreshold; |
| cmd->gtxPERMargin = gtx_info->gtxPERMargin; |
| cmd->gtxTPCstep = gtx_info->gtxTPCstep; |
| cmd->gtxTPCMin = gtx_info->gtxTPCMin; |
| cmd->gtxBWMask = gtx_info->gtxBWMask; |
| |
| WMA_LOGD("Setting vdev%d GTX values:htmcs 0x%x, vhtmcs 0x%x, usermask 0x%x, gtxPERThreshold %d, gtxPERMargin %d, gtxTPCstep %d, gtxTPCMin %d, gtxBWMask 0x%x.", |
| if_id, cmd->gtxRTMask[0], cmd->gtxRTMask[1], |
| cmd->userGtxMask, cmd->gtxPERThreshold, cmd->gtxPERMargin, |
| cmd->gtxTPCstep, cmd->gtxTPCMin, cmd->gtxBWMask); |
| return wmi_unified_cmd_send(wmi_handle, buf, len, WMI_VDEV_SET_GTX_PARAMS_CMDID); |
| } |
| |
| /** |
| * wma_send_echo_request() - send echo request to firmware |
| * @wma: wma context |
| * |
| * Return: none |
| */ |
| static void wma_send_echo_request(tp_wma_handle wma) |
| { |
| wmi_echo_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __FUNCTION__); |
| return; |
| } |
| |
| cmd = (wmi_echo_cmd_fixed_param *)wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_echo_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_echo_cmd_fixed_param)); |
| cmd->value = true; |
| |
| WMA_LOGD("Sent Echo request to firmware!"); |
| if (wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_ECHO_CMDID)) { |
| WMA_LOGE("Failed to send Echo cmd to firmware"); |
| wmi_buf_free(buf); |
| } |
| } |
| |
| /** |
| * wma_set_modulated_dtim() - function to configure modulated dtim |
| * @wma: wma handle |
| * @privcmd: structure containing parameters |
| * |
| * This function configures the modulated dtim in firmware |
| * |
| * Return: none |
| */ |
| static void wma_set_modulated_dtim(tp_wma_handle wma, |
| wda_cli_set_cmd_t *privcmd) |
| { |
| uint8_t vdev_id = privcmd->param_vdev_id; |
| struct wma_txrx_node *iface = |
| &wma->interfaces[vdev_id]; |
| bool prev_dtim_enabled; |
| uint32_t listen_interval; |
| int ret; |
| |
| iface->alt_modulated_dtim = privcmd->param_value; |
| |
| prev_dtim_enabled = iface->alt_modulated_dtim_enabled; |
| |
| if (1 != privcmd->param_value) |
| iface->alt_modulated_dtim_enabled = true; |
| else |
| iface->alt_modulated_dtim_enabled = false; |
| |
| if ((true == iface->alt_modulated_dtim_enabled) || |
| (true == prev_dtim_enabled)) { |
| |
| listen_interval = iface->alt_modulated_dtim |
| * iface->dtimPeriod; |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, |
| privcmd->param_vdev_id, |
| WMI_VDEV_PARAM_LISTEN_INTERVAL, |
| listen_interval); |
| if (ret) |
| /* Even if it fails, continue */ |
| WMA_LOGW("Failed to set listen interval %d", |
| listen_interval); |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, |
| privcmd->param_vdev_id, |
| WMI_VDEV_PARAM_DTIM_POLICY , |
| NORMAL_DTIM); |
| if (ret) |
| WMA_LOGE("Failed to Set to Normal DTIM policy"); |
| } |
| } |
| |
| static void wma_process_cli_set_cmd(tp_wma_handle wma, |
| wda_cli_set_cmd_t *privcmd) |
| { |
| int ret = 0, vid = privcmd->param_vdev_id, pps_val = 0; |
| struct wma_txrx_node *intr = wma->interfaces; |
| tpAniSirGlobal pMac = (tpAniSirGlobal )vos_get_context(VOS_MODULE_ID_PE, |
| wma->vos_context); |
| struct qpower_params *qparams = &intr[vid].config.qpower_params; |
| |
| if (NULL == pMac) { |
| WMA_LOGE("%s: Failed to get pMac", __func__); |
| return; |
| } |
| |
| if (privcmd->param_id >= WMI_CMDID_MAX) { |
| /* |
| * This configuration setting is not done using any wmi |
| * command, call appropriate handler. |
| */ |
| if (wma_set_priv_cfg(wma, privcmd)) |
| WMA_LOGE("Failed to set wma priv congiuration"); |
| return; |
| } |
| |
| switch (privcmd->param_vp_dev) { |
| case VDEV_CMD: |
| if (!wma->interfaces[privcmd->param_vdev_id].is_vdev_valid) { |
| WMA_LOGE("%s Vdev id is not valid", __func__); |
| return ; |
| } |
| WMA_LOGD("vdev id %d pid %d pval %d", privcmd->param_vdev_id, |
| privcmd->param_id, privcmd->param_value); |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, |
| privcmd->param_vdev_id, |
| privcmd->param_id, |
| privcmd->param_value); |
| if (ret) { |
| WMA_LOGE("wmi_unified_vdev_set_param_send" |
| " failed ret %d", ret); |
| return; |
| } |
| break; |
| case PDEV_CMD: |
| WMA_LOGD("pdev pid %d pval %d", privcmd->param_id, |
| privcmd->param_value); |
| if ((privcmd->param_id == WMI_PDEV_PARAM_RX_CHAIN_MASK) || |
| (privcmd->param_id == WMI_PDEV_PARAM_TX_CHAIN_MASK) || |
| (privcmd->param_id == WMI_PDEV_PARAM_RX_CHAIN_MASK_2G) || |
| (privcmd->param_id == WMI_PDEV_PARAM_TX_CHAIN_MASK_2G) || |
| (privcmd->param_id == WMI_PDEV_PARAM_RX_CHAIN_MASK_5G) || |
| (privcmd->param_id == WMI_PDEV_PARAM_TX_CHAIN_MASK_5G)) |
| wma_update_txrx_chainmask(wma->num_rf_chains, |
| &privcmd->param_value); |
| |
| ret = wmi_unified_pdev_set_param(wma->wmi_handle, |
| privcmd->param_id, |
| privcmd->param_value); |
| if (ret) { |
| WMA_LOGE("wmi_unified_vdev_set_param_send" |
| " failed ret %d", ret); |
| return; |
| } |
| break; |
| case GEN_CMD: |
| { |
| ol_txrx_vdev_handle vdev = NULL; |
| struct wma_txrx_node *intr = wma->interfaces; |
| |
| vdev = wma_find_vdev_by_id(wma, privcmd->param_vdev_id); |
| if (!vdev) { |
| WMA_LOGE("%s:Invalid vdev handle", __func__); |
| return; |
| } |
| WMA_LOGD("gen pid %d pval %d", privcmd->param_id, |
| privcmd->param_value); |
| |
| switch (privcmd->param_id) { |
| case GEN_VDEV_PARAM_AMPDU: |
| ret = ol_txrx_aggr_cfg(vdev, privcmd->param_value, 0); |
| if (ret) |
| WMA_LOGE("ol_txrx_aggr_cfg set ampdu" |
| " failed ret %d", ret); |
| else |
| intr[privcmd->param_vdev_id].config.ampdu = privcmd->param_value; |
| break; |
| case GEN_VDEV_PARAM_AMSDU: |
| ret = ol_txrx_aggr_cfg(vdev, 0, privcmd->param_value); |
| if (ret) |
| WMA_LOGE("ol_txrx_aggr_cfg set amsdu" |
| " failed ret %d", ret); |
| else |
| intr[privcmd->param_vdev_id].config.amsdu = privcmd->param_value; |
| break; |
| case GEN_PARAM_DUMP_AGC_START: |
| HTCDump(wma->htc_handle, AGC_DUMP, true); |
| break; |
| case GEN_PARAM_DUMP_AGC: |
| HTCDump(wma->htc_handle, AGC_DUMP, false); |
| break; |
| case GEN_PARAM_DUMP_CHANINFO_START: |
| HTCDump(wma->htc_handle, CHAN_DUMP, true); |
| break; |
| case GEN_PARAM_DUMP_CHANINFO: |
| HTCDump(wma->htc_handle, CHAN_DUMP, false); |
| break; |
| case GEN_PARAM_DUMP_WATCHDOG: |
| HTCDump(wma->htc_handle, WD_DUMP, false); |
| break; |
| case GEN_PARAM_CRASH_INJECT: |
| ret = wmi_crash_inject(wma->wmi_handle, |
| privcmd->param_value, privcmd->param_sec_value); |
| break; |
| case GEN_PARAM_CAPTURE_TSF: |
| ret = wma_capture_tsf(wma, privcmd->param_value); |
| break; |
| case GEN_PARAM_RESET_TSF_GPIO: |
| ret = wma_reset_tsf_gpio(wma, privcmd->param_value); |
| break; |
| #ifdef CONFIG_ATH_PCIE_ACCESS_DEBUG |
| case GEN_PARAM_DUMP_PCIE_ACCESS_LOG: |
| HTCDump(wma->htc_handle, PCIE_DUMP, false); |
| break; |
| #endif |
| case GEN_PARAM_MODULATED_DTIM: |
| wma_set_modulated_dtim(wma, privcmd); |
| break; |
| default: |
| WMA_LOGE("Invalid param id 0x%x", privcmd->param_id); |
| break; |
| } |
| break; |
| } |
| case DBG_CMD: |
| WMA_LOGD("dbg pid %d pval %d", privcmd->param_id, |
| privcmd->param_value); |
| switch (privcmd->param_id) { |
| case WMI_DBGLOG_LOG_LEVEL: |
| ret = dbglog_set_log_lvl(wma->wmi_handle, privcmd->param_value); |
| if (ret) |
| WMA_LOGE("dbglog_set_log_lvl" |
| " failed ret %d", ret); |
| break; |
| case WMI_DBGLOG_VAP_ENABLE: |
| ret = dbglog_vap_log_enable(wma->wmi_handle, privcmd->param_value, TRUE); |
| if (ret) |
| WMA_LOGE("dbglog_vap_log_enable" |
| " failed ret %d", ret); |
| break; |
| case WMI_DBGLOG_VAP_DISABLE: |
| ret = dbglog_vap_log_enable(wma->wmi_handle, privcmd->param_value, FALSE); |
| if (ret) |
| WMA_LOGE("dbglog_vap_log_enable" |
| " failed ret %d", ret); |
| break; |
| case WMI_DBGLOG_MODULE_ENABLE: |
| ret = dbglog_module_log_enable(wma->wmi_handle, privcmd->param_value, TRUE); |
| if (ret) |
| WMA_LOGE("dbglog_module_log_enable" |
| " failed ret %d", ret); |
| break; |
| case WMI_DBGLOG_MODULE_DISABLE: |
| ret = dbglog_module_log_enable(wma->wmi_handle, privcmd->param_value, FALSE); |
| if (ret) |
| WMA_LOGE("dbglog_module_log_enable" |
| " failed ret %d", ret); |
| break; |
| case WMI_DBGLOG_MOD_LOG_LEVEL: |
| ret = dbglog_set_mod_log_lvl(wma->wmi_handle, privcmd->param_value); |
| if (ret) |
| WMA_LOGE("dbglog_module_log_enable" |
| " failed ret %d", ret); |
| break; |
| case WMI_DBGLOG_TYPE: |
| ret = dbglog_parser_type_init(wma->wmi_handle, privcmd->param_value); |
| if (ret) |
| WMA_LOGE("dbglog_parser_type_init" |
| " failed ret %d", ret); |
| break; |
| case WMI_DBGLOG_REPORT_ENABLE: |
| ret = dbglog_report_enable(wma->wmi_handle, privcmd->param_value); |
| if (ret) |
| WMA_LOGE("dbglog_report_enable" |
| " failed ret %d", ret); |
| break; |
| #ifdef FEATURE_GREEN_AP |
| case WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID: |
| /* Set the Green AP */ |
| ret = wmi_unified_pdev_green_ap_ps_enable_cmd(wma->wmi_handle, |
| privcmd->param_value); |
| if (ret) { |
| WMA_LOGE("Set GreenAP Failed val %d", privcmd->param_value); |
| } |
| break; |
| #endif /* FEATURE_GREEN_AP */ |
| |
| default: |
| WMA_LOGE("Invalid param id 0x%x", privcmd->param_id); |
| break; |
| } |
| break; |
| case PPS_CMD: |
| WMA_LOGD("dbg pid %d pval %d", privcmd->param_id, |
| privcmd->param_value); |
| switch (privcmd->param_id) { |
| |
| case WMI_VDEV_PPS_PAID_MATCH: |
| pps_val = ((privcmd->param_value << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_PAID_MATCH & 0xffff); |
| intr[vid].config.pps_params.paid_match_enable = privcmd->param_value; |
| break; |
| case WMI_VDEV_PPS_GID_MATCH: |
| pps_val = ((privcmd->param_value << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_GID_MATCH & 0xffff); |
| intr[vid].config.pps_params.gid_match_enable = privcmd->param_value; |
| break; |
| case WMI_VDEV_PPS_EARLY_TIM_CLEAR: |
| pps_val = ((privcmd->param_value << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_EARLY_TIM_CLEAR & 0xffff); |
| intr[vid].config.pps_params.tim_clear = privcmd->param_value; |
| break; |
| case WMI_VDEV_PPS_EARLY_DTIM_CLEAR: |
| pps_val = ((privcmd->param_value << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_EARLY_DTIM_CLEAR & 0xffff); |
| intr[vid].config.pps_params.dtim_clear = privcmd->param_value; |
| break; |
| case WMI_VDEV_PPS_EOF_PAD_DELIM: |
| pps_val = ((privcmd->param_value << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_EOF_PAD_DELIM & 0xffff); |
| intr[vid].config.pps_params.eof_delim = privcmd->param_value; |
| break; |
| case WMI_VDEV_PPS_MACADDR_MISMATCH: |
| pps_val = ((privcmd->param_value << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_MACADDR_MISMATCH & 0xffff); |
| intr[vid].config.pps_params.mac_match = privcmd->param_value; |
| break; |
| case WMI_VDEV_PPS_DELIM_CRC_FAIL: |
| pps_val = ((privcmd->param_value << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_DELIM_CRC_FAIL & 0xffff); |
| intr[vid].config.pps_params.delim_fail = privcmd->param_value; |
| break; |
| case WMI_VDEV_PPS_GID_NSTS_ZERO: |
| pps_val = ((privcmd->param_value << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_GID_NSTS_ZERO & 0xffff); |
| intr[vid].config.pps_params.nsts_zero = privcmd->param_value; |
| break; |
| case WMI_VDEV_PPS_RSSI_CHECK: |
| pps_val = ((privcmd->param_value << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_RSSI_CHECK & 0xffff); |
| intr[vid].config.pps_params.rssi_chk = privcmd->param_value; |
| break; |
| case WMI_VDEV_PPS_5G_EBT: |
| pps_val = ((privcmd->param_value << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_5G_EBT & 0xffff); |
| intr[vid].config.pps_params.ebt_5g = privcmd->param_value; |
| break; |
| default: |
| WMA_LOGE("Invalid param id 0x%x", privcmd->param_id); |
| break; |
| } |
| break; |
| |
| case QPOWER_CMD: |
| WMA_LOGD("QPOWER CLI CMD pid %d pval %d", privcmd->param_id, |
| privcmd->param_value); |
| switch (privcmd->param_id) { |
| case WMI_STA_PS_PARAM_QPOWER_PSPOLL_COUNT: |
| WMA_LOGD("QPOWER CLI CMD:Ps Poll Cnt val %d", |
| privcmd->param_value); |
| /* Set the QPower Ps Poll Count */ |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, |
| vid, |
| WMI_STA_PS_PARAM_QPOWER_PSPOLL_COUNT, |
| privcmd->param_value); |
| if (ret) { |
| WMA_LOGE("Set Q-PsPollCnt Failed vdevId %d val %d", |
| vid, privcmd->param_value); |
| } else { |
| qparams->max_ps_poll_cnt = |
| privcmd->param_value; |
| } |
| break; |
| case WMI_STA_PS_PARAM_QPOWER_MAX_TX_BEFORE_WAKE: |
| WMA_LOGD("QPOWER CLI CMD:Max Tx Before wake val %d", |
| privcmd->param_value); |
| /* Set the QPower Max Tx Before Wake */ |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, |
| vid, |
| WMI_STA_PS_PARAM_QPOWER_MAX_TX_BEFORE_WAKE, |
| privcmd->param_value); |
| if (ret) { |
| WMA_LOGE("Set Q-MaxTxBefWake Failed vId %d val %d", |
| vid, privcmd->param_value); |
| } else { |
| qparams->max_tx_before_wake = |
| privcmd->param_value; |
| } |
| break; |
| case WMI_STA_PS_PARAM_QPOWER_SPEC_PSPOLL_WAKE_INTERVAL: |
| WMA_LOGD("QPOWER CLI CMD:Ps Poll Wake Inv val %d", |
| privcmd->param_value); |
| /* Set the QPower Spec Ps Poll Wake Inv */ |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, |
| vid, |
| WMI_STA_PS_PARAM_QPOWER_SPEC_PSPOLL_WAKE_INTERVAL, |
| privcmd->param_value); |
| if (ret) { |
| WMA_LOGE("Set Q-PsPoll WakeIntv Failed vId %d val %d", |
| vid, privcmd->param_value); |
| } else { |
| qparams->spec_ps_poll_wake_interval = |
| privcmd->param_value; |
| } |
| break; |
| case WMI_STA_PS_PARAM_QPOWER_SPEC_MAX_SPEC_NODATA_PSPOLL: |
| WMA_LOGD("QPOWER CLI CMD:Spec NoData Ps Poll val %d", |
| privcmd->param_value); |
| /* Set the QPower Spec NoData PsPoll */ |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, |
| vid, |
| WMI_STA_PS_PARAM_QPOWER_SPEC_MAX_SPEC_NODATA_PSPOLL, |
| privcmd->param_value); |
| if (ret) { |
| WMA_LOGE("Set Q-SpecNoDataPsPoll Failed vId %d val %d", |
| vid, privcmd->param_value); |
| } else { |
| qparams->max_spec_nodata_ps_poll = |
| privcmd->param_value; |
| } |
| break; |
| |
| default: |
| WMA_LOGE("Invalid param id 0x%x", privcmd->param_id); |
| break; |
| } |
| break; |
| case GTX_CMD: |
| WMA_LOGD("vdev id %d pid %d pval %d", privcmd->param_vdev_id, |
| privcmd->param_id, privcmd->param_value); |
| switch (privcmd->param_id) { |
| case WMI_VDEV_PARAM_GTX_HT_MCS: |
| intr[vid].config.gtx_info.gtxRTMask[0] = privcmd->param_value; |
| ret = wmi_unified_vdev_set_gtx_cfg_send(wma->wmi_handle, |
| privcmd->param_vdev_id, |
| &intr[vid].config.gtx_info); |
| break; |
| case WMI_VDEV_PARAM_GTX_VHT_MCS: |
| intr[vid].config.gtx_info.gtxRTMask[1] = privcmd->param_value; |
| ret = wmi_unified_vdev_set_gtx_cfg_send(wma->wmi_handle, |
| privcmd->param_vdev_id, |
| &intr[vid].config.gtx_info); |
| break; |
| |
| case WMI_VDEV_PARAM_GTX_USR_CFG: |
| intr[vid].config.gtx_info.gtxUsrcfg = privcmd->param_value; |
| ret = wmi_unified_vdev_set_gtx_cfg_send(wma->wmi_handle, |
| privcmd->param_vdev_id, |
| &intr[vid].config.gtx_info); |
| break; |
| |
| case WMI_VDEV_PARAM_GTX_THRE: |
| intr[vid].config.gtx_info.gtxPERThreshold = privcmd->param_value; |
| ret = wmi_unified_vdev_set_gtx_cfg_send(wma->wmi_handle, |
| privcmd->param_vdev_id, |
| &intr[vid].config.gtx_info); |
| break; |
| |
| case WMI_VDEV_PARAM_GTX_MARGIN: |
| intr[vid].config.gtx_info.gtxPERMargin = privcmd->param_value; |
| ret = wmi_unified_vdev_set_gtx_cfg_send(wma->wmi_handle, |
| privcmd->param_vdev_id, |
| &intr[vid].config.gtx_info); |
| break; |
| |
| case WMI_VDEV_PARAM_GTX_STEP: |
| intr[vid].config.gtx_info.gtxTPCstep = privcmd->param_value; |
| ret = wmi_unified_vdev_set_gtx_cfg_send(wma->wmi_handle, |
| privcmd->param_vdev_id, |
| &intr[vid].config.gtx_info); |
| break; |
| |
| case WMI_VDEV_PARAM_GTX_MINTPC: |
| intr[vid].config.gtx_info.gtxTPCMin = privcmd->param_value; |
| ret = wmi_unified_vdev_set_gtx_cfg_send(wma->wmi_handle, |
| privcmd->param_vdev_id, |
| &intr[vid].config.gtx_info); |
| break; |
| |
| case WMI_VDEV_PARAM_GTX_BW_MASK: |
| intr[vid].config.gtx_info.gtxBWMask = privcmd->param_value; |
| ret = wmi_unified_vdev_set_gtx_cfg_send(wma->wmi_handle, |
| privcmd->param_vdev_id, |
| &intr[vid].config.gtx_info); |
| if (ret) { |
| WMA_LOGE("wmi_unified_vdev_set_param_send" |
| " failed ret %d", ret); |
| return; |
| } |
| break; |
| default: |
| break; |
| } |
| break; |
| |
| default: |
| WMA_LOGE("Invalid vpdev command id"); |
| } |
| if (1 == privcmd->param_vp_dev) { |
| switch (privcmd->param_id) { |
| case WMI_VDEV_PARAM_NSS: |
| intr[vid].config.nss = privcmd->param_value; |
| break; |
| case WMI_VDEV_PARAM_LDPC: |
| intr[vid].config.ldpc = privcmd->param_value; |
| break; |
| case WMI_VDEV_PARAM_TX_STBC: |
| intr[vid].config.tx_stbc = privcmd->param_value; |
| break; |
| case WMI_VDEV_PARAM_RX_STBC: |
| intr[vid].config.rx_stbc = privcmd->param_value; |
| break; |
| case WMI_VDEV_PARAM_SGI: |
| intr[vid].config.shortgi = privcmd->param_value; |
| break; |
| case WMI_VDEV_PARAM_ENABLE_RTSCTS: |
| intr[vid].config.rtscts_en = privcmd->param_value; |
| break; |
| case WMI_VDEV_PARAM_CHWIDTH: |
| intr[vid].config.chwidth = privcmd->param_value; |
| break; |
| case WMI_VDEV_PARAM_FIXED_RATE: |
| intr[vid].config.tx_rate = privcmd->param_value; |
| break; |
| case WMI_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE: |
| intr[vid].config.erx_adjust = privcmd->param_value; |
| break; |
| case WMI_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM: |
| intr[vid].config.erx_bmiss_num = privcmd->param_value; |
| break; |
| case WMI_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE: |
| intr[vid].config.erx_bmiss_cycle = privcmd->param_value; |
| break; |
| case WMI_VDEV_PARAM_EARLY_RX_SLOP_STEP: |
| intr[vid].config.erx_slop_step = privcmd->param_value; |
| break; |
| case WMI_VDEV_PARAM_EARLY_RX_INIT_SLOP: |
| intr[vid].config.erx_init_slop = privcmd->param_value; |
| break; |
| case WMI_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE: |
| intr[vid].config.erx_adj_pause = privcmd->param_value; |
| break; |
| case WMI_VDEV_PARAM_EARLY_RX_DRIFT_SAMPLE: |
| intr[vid].config.erx_dri_sample = privcmd->param_value; |
| break; |
| default: |
| WMA_LOGE("Invalid wda_cli_set vdev command/Not" |
| " yet implemented 0x%x", privcmd->param_id); |
| break; |
| } |
| } else if (2 == privcmd->param_vp_dev) { |
| switch (privcmd->param_id) { |
| case WMI_PDEV_PARAM_ANI_ENABLE: |
| wma->pdevconfig.ani_enable = privcmd->param_value; |
| break; |
| case WMI_PDEV_PARAM_ANI_POLL_PERIOD: |
| wma->pdevconfig.ani_poll_len = privcmd->param_value; |
| break; |
| case WMI_PDEV_PARAM_ANI_LISTEN_PERIOD: |
| wma->pdevconfig.ani_listen_len = privcmd->param_value; |
| break; |
| case WMI_PDEV_PARAM_ANI_OFDM_LEVEL: |
| wma->pdevconfig.ani_ofdm_level = privcmd->param_value; |
| break; |
| case WMI_PDEV_PARAM_ANI_CCK_LEVEL: |
| wma->pdevconfig.ani_cck_level = privcmd->param_value; |
| break; |
| case WMI_PDEV_PARAM_DYNAMIC_BW: |
| wma->pdevconfig.cwmenable = privcmd->param_value; |
| break; |
| case WMI_PDEV_PARAM_CTS_CBW: |
| wma->pdevconfig.cts_cbw = privcmd->param_value; |
| break; |
| case WMI_PDEV_PARAM_TX_CHAIN_MASK: |
| wma->pdevconfig.txchainmask = privcmd->param_value; |
| break; |
| case WMI_PDEV_PARAM_RX_CHAIN_MASK: |
| wma->pdevconfig.rxchainmask = privcmd->param_value; |
| break; |
| case WMI_PDEV_PARAM_TX_CHAIN_MASK_2G: |
| wma->pdevconfig.chainmask_2g_tx = privcmd->param_value; |
| break; |
| case WMI_PDEV_PARAM_RX_CHAIN_MASK_2G: |
| wma->pdevconfig.chainmask_2g_rx = privcmd->param_value; |
| break; |
| case WMI_PDEV_PARAM_TX_CHAIN_MASK_5G: |
| wma->pdevconfig.chainmask_5g_tx = privcmd->param_value; |
| break; |
| case WMI_PDEV_PARAM_RX_CHAIN_MASK_5G: |
| wma->pdevconfig.chainmask_5g_rx = privcmd->param_value; |
| break; |
| case WMI_PDEV_PARAM_BURST_ENABLE: |
| wma->pdevconfig.burst_enable = privcmd->param_value; |
| if ((wma->pdevconfig.burst_enable == 1) && |
| (wma->pdevconfig.burst_dur == 0)) |
| wma->pdevconfig.burst_dur = WMA_DEFAULT_SIFS_BURST_DURATION; |
| else if (wma->pdevconfig.burst_enable == 0) |
| wma->pdevconfig.burst_dur = 0; |
| break; |
| case WMI_PDEV_PARAM_BURST_DUR: |
| wma->pdevconfig.burst_dur = privcmd->param_value; |
| break; |
| case WMI_PDEV_PARAM_TXPOWER_LIMIT2G: |
| wma->pdevconfig.txpow2g = privcmd->param_value; |
| if ((pMac->roam.configParam.bandCapability == |
| eCSR_BAND_ALL) || |
| (pMac->roam.configParam.bandCapability == |
| eCSR_BAND_24)) { |
| if (cfgSetInt(pMac, |
| WNI_CFG_CURRENT_TX_POWER_LEVEL, |
| privcmd->param_value) != eSIR_SUCCESS) { |
| WMA_LOGE("could not set" |
| " WNI_CFG_CURRENT_TX_POWER_LEVEL"); |
| } |
| } |
| else |
| WMA_LOGE("Current band is not 2G"); |
| break; |
| case WMI_PDEV_PARAM_TXPOWER_LIMIT5G: |
| wma->pdevconfig.txpow5g = privcmd->param_value; |
| if ((pMac->roam.configParam.bandCapability == |
| eCSR_BAND_ALL) || |
| (pMac->roam.configParam.bandCapability == |
| eCSR_BAND_5G)) { |
| if (cfgSetInt(pMac, |
| WNI_CFG_CURRENT_TX_POWER_LEVEL, |
| privcmd->param_value) != eSIR_SUCCESS) { |
| WMA_LOGE("could not set" |
| " WNI_CFG_CURRENT_TX_POWER_LEVEL"); |
| } |
| } |
| else |
| WMA_LOGE("Current band is not 5G"); |
| break; |
| case WMI_PDEV_PARAM_ENA_ANT_DIV: |
| case WMI_PDEV_PARAM_FORCE_CHAIN_ANT: |
| case WMI_PDEV_PARAM_ANT_DIV_SELFTEST: |
| case WMI_PDEV_PARAM_ANT_DIV_SELFTEST_INTVL: |
| case WMI_PDEV_PARAM_RADIO_CHAN_STATS_ENABLE: |
| case WMI_PDEV_PARAM_RADIO_DIAGNOSIS_ENABLE: |
| break; |
| default: |
| WMA_LOGE("Invalid wda_cli_set pdev command/Not" |
| " yet implemented 0x%x", privcmd->param_id); |
| break; |
| } |
| } else if (5 == privcmd->param_vp_dev) { |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, privcmd->param_vdev_id, |
| WMI_VDEV_PARAM_PACKET_POWERSAVE, |
| pps_val); |
| if (ret) |
| WMA_LOGE("Failed to send wmi packet power save cmd"); |
| else |
| WMA_LOGD("Sent packet power save cmd %d value %x to target", |
| privcmd->param_id, pps_val); |
| } |
| } |
| |
| int wma_cli_get_command(void *wmapvosContext, int vdev_id, |
| int param_id, int vpdev) |
| { |
| int ret = 0; |
| tp_wma_handle wma; |
| struct wma_txrx_node *intr = NULL; |
| |
| wma = (tp_wma_handle) vos_get_context(VOS_MODULE_ID_WDA, |
| wmapvosContext); |
| |
| if (NULL == wma) |
| { |
| WMA_LOGE("%s: Invalid wma handle", __func__); |
| return -EINVAL; |
| } |
| |
| intr = wma->interfaces; |
| |
| if (VDEV_CMD == vpdev) { |
| switch (param_id) { |
| case WMI_VDEV_PARAM_NSS: |
| ret = intr[vdev_id].config.nss; |
| break; |
| #ifdef QCA_SUPPORT_GTX |
| case WMI_VDEV_PARAM_GTX_HT_MCS: |
| ret = intr[vdev_id].config.gtx_info.gtxRTMask[0]; |
| break; |
| case WMI_VDEV_PARAM_GTX_VHT_MCS: |
| ret = intr[vdev_id].config.gtx_info.gtxRTMask[1]; |
| break; |
| case WMI_VDEV_PARAM_GTX_USR_CFG: |
| ret = intr[vdev_id].config.gtx_info.gtxUsrcfg; |
| break; |
| case WMI_VDEV_PARAM_GTX_THRE: |
| ret = intr[vdev_id].config.gtx_info.gtxPERThreshold; |
| break; |
| case WMI_VDEV_PARAM_GTX_MARGIN: |
| ret = intr[vdev_id].config.gtx_info.gtxPERMargin; |
| break; |
| case WMI_VDEV_PARAM_GTX_STEP: |
| ret = intr[vdev_id].config.gtx_info.gtxTPCstep; |
| break; |
| case WMI_VDEV_PARAM_GTX_MINTPC: |
| ret = intr[vdev_id].config.gtx_info.gtxTPCMin; |
| break; |
| case WMI_VDEV_PARAM_GTX_BW_MASK: |
| ret = intr[vdev_id].config.gtx_info.gtxBWMask; |
| break; |
| #endif |
| case WMI_VDEV_PARAM_LDPC: |
| ret = intr[vdev_id].config.ldpc; |
| break; |
| case WMI_VDEV_PARAM_TX_STBC: |
| ret = intr[vdev_id].config.tx_stbc; |
| break; |
| case WMI_VDEV_PARAM_RX_STBC: |
| ret = intr[vdev_id].config.rx_stbc; |
| break; |
| case WMI_VDEV_PARAM_SGI: |
| ret = intr[vdev_id].config.shortgi; |
| break; |
| case WMI_VDEV_PARAM_ENABLE_RTSCTS: |
| ret = intr[vdev_id].config.rtscts_en; |
| break; |
| case WMI_VDEV_PARAM_CHWIDTH: |
| ret = intr[vdev_id].config.chwidth; |
| break; |
| case WMI_VDEV_PARAM_FIXED_RATE: |
| ret = intr[vdev_id].config.tx_rate; |
| break; |
| default: |
| WMA_LOGE("Invalid cli_get vdev command/Not" |
| " yet implemented 0x%x", param_id); |
| return -EINVAL; |
| } |
| } else if (PDEV_CMD == vpdev) { |
| switch (param_id) { |
| case WMI_PDEV_PARAM_ANI_ENABLE: |
| ret = wma->pdevconfig.ani_enable; |
| break; |
| case WMI_PDEV_PARAM_ANI_POLL_PERIOD: |
| ret = wma->pdevconfig.ani_poll_len; |
| break; |
| case WMI_PDEV_PARAM_ANI_LISTEN_PERIOD: |
| ret = wma->pdevconfig.ani_listen_len; |
| break; |
| case WMI_PDEV_PARAM_ANI_OFDM_LEVEL: |
| ret = wma->pdevconfig.ani_ofdm_level; |
| break; |
| case WMI_PDEV_PARAM_ANI_CCK_LEVEL: |
| ret = wma->pdevconfig.ani_cck_level; |
| break; |
| case WMI_PDEV_PARAM_DYNAMIC_BW: |
| ret = wma->pdevconfig.cwmenable; |
| break; |
| case WMI_PDEV_PARAM_CTS_CBW: |
| ret = wma->pdevconfig.cts_cbw; |
| break; |
| case WMI_PDEV_PARAM_TX_CHAIN_MASK: |
| ret = wma->pdevconfig.txchainmask; |
| break; |
| case WMI_PDEV_PARAM_RX_CHAIN_MASK: |
| ret = wma->pdevconfig.rxchainmask; |
| break; |
| case WMI_PDEV_PARAM_TXPOWER_LIMIT2G: |
| ret = wma->pdevconfig.txpow2g; |
| break; |
| case WMI_PDEV_PARAM_TXPOWER_LIMIT5G: |
| ret = wma->pdevconfig.txpow5g; |
| break; |
| case WMI_PDEV_PARAM_BURST_ENABLE: |
| ret = wma->pdevconfig.burst_enable; |
| break; |
| case WMI_PDEV_PARAM_BURST_DUR: |
| ret = wma->pdevconfig.burst_dur; |
| break; |
| default: |
| WMA_LOGE("Invalid cli_get pdev command/Not" |
| " yet implemented 0x%x", param_id); |
| return -EINVAL; |
| } |
| } else if (GEN_CMD == vpdev) { |
| switch (param_id) { |
| case GEN_VDEV_PARAM_AMPDU: |
| ret = intr[vdev_id].config.ampdu; |
| break; |
| case GEN_VDEV_PARAM_AMSDU: |
| ret = intr[vdev_id].config.amsdu; |
| break; |
| default: |
| WMA_LOGE("Invalid generic vdev command/Not" |
| " yet implemented 0x%x", param_id); |
| return -EINVAL; |
| } |
| } else if (PPS_CMD == vpdev) { |
| switch (param_id) { |
| case WMI_VDEV_PPS_PAID_MATCH: |
| ret = intr[vdev_id].config.pps_params.paid_match_enable; |
| break; |
| case WMI_VDEV_PPS_GID_MATCH: |
| ret = intr[vdev_id].config.pps_params.gid_match_enable; |
| break; |
| case WMI_VDEV_PPS_EARLY_TIM_CLEAR: |
| ret = intr[vdev_id].config.pps_params.tim_clear; |
| break; |
| case WMI_VDEV_PPS_EARLY_DTIM_CLEAR: |
| ret = intr[vdev_id].config.pps_params.dtim_clear; |
| break; |
| case WMI_VDEV_PPS_EOF_PAD_DELIM: |
| ret = intr[vdev_id].config.pps_params.eof_delim; |
| break; |
| case WMI_VDEV_PPS_MACADDR_MISMATCH: |
| ret = intr[vdev_id].config.pps_params.mac_match; |
| break; |
| case WMI_VDEV_PPS_DELIM_CRC_FAIL: |
| ret = intr[vdev_id].config.pps_params.delim_fail; |
| break; |
| case WMI_VDEV_PPS_GID_NSTS_ZERO: |
| ret = intr[vdev_id].config.pps_params.nsts_zero; |
| break; |
| case WMI_VDEV_PPS_RSSI_CHECK: |
| ret = intr[vdev_id].config.pps_params.rssi_chk; |
| break; |
| default: |
| WMA_LOGE("Invalid pps vdev command/Not" |
| " yet implemented 0x%x", param_id); |
| return -EINVAL; |
| } |
| } else if (QPOWER_CMD == vpdev) { |
| switch (param_id) { |
| case WMI_STA_PS_PARAM_QPOWER_PSPOLL_COUNT: |
| ret = intr[vdev_id].config.qpower_params.max_ps_poll_cnt; |
| break; |
| |
| case WMI_STA_PS_PARAM_QPOWER_MAX_TX_BEFORE_WAKE: |
| ret = intr[vdev_id].config.qpower_params.max_tx_before_wake; |
| break; |
| |
| case WMI_STA_PS_PARAM_QPOWER_SPEC_PSPOLL_WAKE_INTERVAL: |
| ret = |
| intr[vdev_id].config.qpower_params.spec_ps_poll_wake_interval; |
| break; |
| |
| case WMI_STA_PS_PARAM_QPOWER_SPEC_MAX_SPEC_NODATA_PSPOLL: |
| ret = intr[vdev_id].config.qpower_params.max_spec_nodata_ps_poll; |
| break; |
| |
| default: |
| WMA_LOGE("Invalid generic vdev command/Not" |
| " yet implemented 0x%x", param_id); |
| return -EINVAL; |
| } |
| } else if (GTX_CMD == vpdev) { |
| switch (param_id) { |
| case WMI_VDEV_PARAM_GTX_HT_MCS: |
| ret = intr[vdev_id].config.gtx_info.gtxRTMask[0]; |
| break; |
| case WMI_VDEV_PARAM_GTX_VHT_MCS: |
| ret = intr[vdev_id].config.gtx_info.gtxRTMask[1]; |
| break; |
| case WMI_VDEV_PARAM_GTX_USR_CFG: |
| ret = intr[vdev_id].config.gtx_info.gtxUsrcfg; |
| break; |
| case WMI_VDEV_PARAM_GTX_THRE: |
| ret = intr[vdev_id].config.gtx_info.gtxPERThreshold; |
| break; |
| case WMI_VDEV_PARAM_GTX_MARGIN: |
| ret = intr[vdev_id].config.gtx_info.gtxPERMargin; |
| break; |
| case WMI_VDEV_PARAM_GTX_STEP: |
| ret = intr[vdev_id].config.gtx_info.gtxTPCstep; |
| break; |
| case WMI_VDEV_PARAM_GTX_MINTPC: |
| ret = intr[vdev_id].config.gtx_info.gtxTPCMin; |
| break; |
| case WMI_VDEV_PARAM_GTX_BW_MASK: |
| ret = intr[vdev_id].config.gtx_info.gtxBWMask; |
| break; |
| default: |
| WMA_LOGE("Invalid generic vdev command/Not" |
| " yet implemented 0x%x", param_id); |
| return -EINVAL; |
| } |
| } |
| return ret; |
| } |
| |
| /** |
| * wma_process_set_pdev_ht_ie_req() - sends HT IE data to FW |
| * |
| * @wma: Pointer to wma handle |
| * @ie_params: Pointer to IE data. |
| * @nss: Nss values to prepare the HT IE. |
| * |
| * Sends the WMI req to set the HT IE to FW. |
| * |
| * Return: None |
| */ |
| void wma_process_set_pdev_ht_ie_req(tp_wma_handle wma, |
| struct set_ie_param *ie_params) |
| { |
| int ret; |
| wmi_pdev_set_ht_ie_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| u_int16_t len; |
| u_int16_t ie_len_pad; |
| u_int8_t *buf_ptr; |
| |
| len = sizeof(*cmd) + WMI_TLV_HDR_SIZE; |
| ie_len_pad = roundup(ie_params->ie_len, sizeof(u_int32_t)); |
| len += ie_len_pad; |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| return; |
| } |
| cmd = (wmi_pdev_set_ht_ie_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_pdev_set_ht_ie_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_pdev_set_ht_ie_cmd_fixed_param)); |
| cmd->reserved0 = 0; |
| cmd->ie_len = ie_params->ie_len; |
| cmd->tx_streams = ie_params->nss; |
| cmd->rx_streams = ie_params->nss; |
| WMA_LOGD("Setting pdev HT ie with Nss = %u", |
| ie_params->nss); |
| buf_ptr = (u_int8_t *)cmd + sizeof(*cmd); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, ie_len_pad); |
| if (ie_params->ie_len) { |
| vos_mem_copy(buf_ptr + WMI_TLV_HDR_SIZE, |
| (u_int8_t *)ie_params->ie_ptr, |
| ie_params->ie_len); |
| } |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_PDEV_SET_HT_CAP_IE_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE("Failed to send set param command ret = %d", ret); |
| wmi_buf_free(buf); |
| } |
| } |
| |
| /** |
| * wma_process_set_pdev_vht_ie_req() - sends VHT IE data to FW |
| * |
| * @wma: Pointer to wma handle |
| * @ie_params: Pointer to IE data. |
| * @nss: Nss values to prepare the VHT IE. |
| * |
| * Sends the WMI req to set the VHT IE to FW. |
| * |
| * Return: None |
| */ |
| void wma_process_set_pdev_vht_ie_req(tp_wma_handle wma, |
| struct set_ie_param *ie_params) |
| { |
| int ret; |
| wmi_pdev_set_vht_ie_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| u_int16_t len; |
| u_int16_t ie_len_pad; |
| u_int8_t *buf_ptr; |
| |
| len = sizeof(*cmd) + WMI_TLV_HDR_SIZE; |
| ie_len_pad = roundup(ie_params->ie_len, sizeof(u_int32_t)); |
| len += ie_len_pad; |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| return; |
| } |
| cmd = (wmi_pdev_set_vht_ie_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_pdev_set_vht_ie_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_pdev_set_vht_ie_cmd_fixed_param)); |
| cmd->reserved0 = 0; |
| cmd->ie_len = ie_params->ie_len; |
| cmd->tx_streams = ie_params->nss; |
| cmd->rx_streams = ie_params->nss; |
| WMA_LOGD("Setting pdev VHT ie with Nss = %u", |
| ie_params->nss); |
| buf_ptr = (u_int8_t *)cmd + sizeof(*cmd); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, ie_len_pad); |
| if (ie_params->ie_len) { |
| vos_mem_copy(buf_ptr + WMI_TLV_HDR_SIZE, |
| (u_int8_t *)ie_params->ie_ptr, |
| ie_params->ie_len); |
| } |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_PDEV_SET_VHT_CAP_IE_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE("Failed to send set param command ret = %d", ret); |
| wmi_buf_free(buf); |
| } |
| } |
| |
| /** |
| * wma_process_set_pdev_ie_req() - process the pdev set IE req |
| * |
| * @wma: Pointer to wma handle |
| * @ie_params: Pointer to IE data. |
| * |
| * Sends the WMI req to set the IE to FW. |
| * |
| * Return: None |
| */ |
| void wma_process_set_pdev_ie_req(tp_wma_handle wma, |
| struct set_ie_param *ie_params) |
| { |
| if (ie_params->ie_type == DOT11_HT_IE) |
| wma_process_set_pdev_ht_ie_req(wma, ie_params); |
| if (ie_params->ie_type == DOT11_VHT_IE) |
| wma_process_set_pdev_vht_ie_req(wma, ie_params); |
| |
| vos_mem_free(ie_params->ie_ptr); |
| } |
| |
| static void |
| wma_update_protection_mode(tp_wma_handle wma, u_int8_t vdev_id, |
| u_int8_t llbcoexist) |
| { |
| int ret; |
| enum ieee80211_protmode prot_mode; |
| |
| prot_mode = llbcoexist ? IEEE80211_PROT_CTSONLY : IEEE80211_PROT_NONE; |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_PROTECTION_MODE, |
| prot_mode); |
| |
| if (ret) |
| WMA_LOGE("Failed to send wmi protection mode cmd"); |
| else |
| WMA_LOGD("Updated protection mode %d to target", prot_mode); |
| } |
| |
| static void |
| wma_update_beacon_interval(tp_wma_handle wma, u_int8_t vdev_id, |
| u_int16_t beaconInterval) |
| { |
| int ret; |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_BEACON_INTERVAL, |
| beaconInterval); |
| |
| if (ret) |
| WMA_LOGE("Failed to update beacon interval"); |
| else |
| WMA_LOGI("Updated beacon interval %d for vdev %d", beaconInterval, vdev_id); |
| } |
| |
| |
| /* |
| * Function : wma_process_update_beacon_params |
| * Description : update the beacon parameters to target |
| * Args : wma handle, beacon parameters |
| * Returns : None |
| */ |
| static void |
| wma_process_update_beacon_params(tp_wma_handle wma, |
| tUpdateBeaconParams *bcn_params) |
| { |
| if (!bcn_params) { |
| WMA_LOGE("bcn_params NULL"); |
| return; |
| } |
| |
| if (bcn_params->smeSessionId >= wma->max_bssid) { |
| WMA_LOGE("Invalid vdev id %d", bcn_params->smeSessionId); |
| return; |
| } |
| |
| if (bcn_params->paramChangeBitmap & PARAM_BCN_INTERVAL_CHANGED) { |
| wma_update_beacon_interval(wma, bcn_params->smeSessionId, |
| bcn_params->beaconInterval); |
| } |
| |
| if (bcn_params->paramChangeBitmap & PARAM_llBCOEXIST_CHANGED) |
| wma_update_protection_mode(wma, bcn_params->smeSessionId, |
| bcn_params->llbCoexist); |
| } |
| |
| /* |
| * Function : wma_update_cfg_params |
| * Description : update the cfg parameters to target |
| * Args : wma handle, cfg parameter |
| * Returns : None |
| */ |
| static void |
| wma_update_cfg_params(tp_wma_handle wma, tSirMsgQ *cfgParam) |
| { |
| u_int8_t vdev_id; |
| u_int32_t param_id; |
| tANI_U32 cfg_val; |
| int ret; |
| /* get mac to acess CFG data base */ |
| struct sAniSirGlobal *pmac; |
| |
| switch(cfgParam->bodyval) { |
| case WNI_CFG_RTS_THRESHOLD: |
| param_id = WMI_VDEV_PARAM_RTS_THRESHOLD; |
| break; |
| case WNI_CFG_FRAGMENTATION_THRESHOLD: |
| param_id = WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD; |
| break; |
| default: |
| WMA_LOGD("Unhandled cfg parameter %d", cfgParam->bodyval); |
| return; |
| } |
| |
| pmac = (struct sAniSirGlobal*)vos_get_context(VOS_MODULE_ID_PE, |
| wma->vos_context); |
| |
| if (NULL == pmac) { |
| WMA_LOGE("%s: Failed to get pmac", __func__); |
| return; |
| } |
| |
| if (wlan_cfgGetInt(pmac, (tANI_U16) cfgParam->bodyval, |
| &cfg_val) != eSIR_SUCCESS) |
| { |
| WMA_LOGE("Failed to get value for CFG PARAMS %d. returning without updating", |
| cfgParam->bodyval); |
| return; |
| } |
| |
| for (vdev_id = 0; vdev_id < wma->max_bssid; vdev_id++) { |
| if (wma->interfaces[vdev_id].handle != 0) { |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, |
| vdev_id, param_id, cfg_val); |
| if (ret) |
| WMA_LOGE("Update cfg params failed for vdevId %d", vdev_id); |
| } |
| } |
| } |
| |
| /* BSS set params functions */ |
| static void |
| wma_vdev_set_bss_params(tp_wma_handle wma, int vdev_id, |
| tSirMacBeaconInterval beaconInterval, tANI_U8 dtimPeriod, |
| tANI_U8 shortSlotTimeSupported, tANI_U8 llbCoexist, |
| tPowerdBm maxTxPower) |
| { |
| int ret; |
| uint32_t slot_time; |
| struct wma_txrx_node *intr = wma->interfaces; |
| |
| /* Beacon Interval setting */ |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_BEACON_INTERVAL, |
| beaconInterval); |
| |
| if (ret) |
| WMA_LOGE("failed to set WMI_VDEV_PARAM_BEACON_INTERVAL"); |
| |
| ret = wmi_unified_vdev_set_gtx_cfg_send(wma->wmi_handle, vdev_id, |
| &intr[vdev_id].config.gtx_info); |
| if (ret) |
| WMA_LOGE("failed to set WMI_VDEV_PARAM_DTIM_PERIOD"); |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_DTIM_PERIOD, |
| dtimPeriod); |
| if (ret) |
| WMA_LOGE("failed to set WMI_VDEV_PARAM_DTIM_PERIOD"); |
| |
| if (!maxTxPower) |
| { |
| WMA_LOGW("Setting Tx power limit to 0"); |
| } |
| |
| WMA_LOGI("%s: Set maxTx pwr [WMI_VDEV_PARAM_TX_PWRLIMIT] to %d", |
| __func__, maxTxPower); |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_TX_PWRLIMIT, |
| maxTxPower); |
| if (ret) |
| WMA_LOGE("failed to set WMI_VDEV_PARAM_TX_PWRLIMIT"); |
| else |
| intr[vdev_id].max_tx_power = maxTxPower; |
| |
| /* Slot time */ |
| if (shortSlotTimeSupported) |
| slot_time = WMI_VDEV_SLOT_TIME_SHORT; |
| else |
| slot_time = WMI_VDEV_SLOT_TIME_LONG; |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_SLOT_TIME, |
| slot_time); |
| if (ret) |
| WMA_LOGE("failed to set WMI_VDEV_PARAM_SLOT_TIME"); |
| |
| /* Initialize protection mode in case of coexistence */ |
| wma_update_protection_mode(wma, vdev_id, llbCoexist); |
| } |
| |
| static void wma_add_bss_ap_mode(tp_wma_handle wma, tpAddBssParams add_bss) |
| { |
| ol_txrx_pdev_handle pdev; |
| ol_txrx_vdev_handle vdev; |
| struct wma_vdev_start_req req; |
| ol_txrx_peer_handle peer; |
| struct wma_target_req *msg; |
| u_int8_t vdev_id, peer_id; |
| VOS_STATUS status; |
| tPowerdBm maxTxPower; |
| #ifdef WLAN_FEATURE_11W |
| int ret = 0; |
| #endif /* WLAN_FEATURE_11W */ |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to get pdev", __func__); |
| goto send_fail_resp; |
| } |
| |
| vdev = wma_find_vdev_by_addr(wma, add_bss->bssId, &vdev_id); |
| if (!vdev) { |
| WMA_LOGE("%s: Failed to get vdev handle", __func__); |
| goto send_fail_resp; |
| } |
| |
| wma->interfaces[vdev_id].wps_state = add_bss->wps_state; |
| wma_set_bss_rate_flags(&wma->interfaces[vdev_id], add_bss); |
| status = wma_create_peer(wma, pdev, vdev, add_bss->bssId, |
| WMI_PEER_TYPE_DEFAULT, vdev_id, |
| VOS_FALSE); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s: Failed to create peer", __func__); |
| goto send_fail_resp; |
| } |
| |
| peer = ol_txrx_find_peer_by_addr(pdev, add_bss->bssId, &peer_id); |
| if (!peer) { |
| WMA_LOGE("%s Failed to find peer %pM", __func__, |
| add_bss->bssId); |
| goto send_fail_resp; |
| } |
| msg = wma_fill_vdev_req(wma, vdev_id, WDA_ADD_BSS_REQ, |
| WMA_TARGET_REQ_TYPE_VDEV_START, add_bss, |
| WMA_VDEV_START_REQUEST_TIMEOUT); |
| if (!msg) { |
| WMA_LOGP("%s Failed to allocate vdev request vdev_id %d", |
| __func__, vdev_id); |
| goto peer_cleanup; |
| } |
| |
| add_bss->staContext.staIdx = ol_txrx_local_peer_id(peer); |
| |
| vos_mem_zero(&req, sizeof(req)); |
| req.vdev_id = vdev_id; |
| req.chan = add_bss->currentOperChannel; |
| req.channelwidth = add_bss->channelwidth; |
| |
| if (add_bss->channelwidth == CH_WIDTH_5MHZ) |
| req.is_quarter_rate = 1; |
| else if (add_bss->channelwidth == CH_WIDTH_10MHZ) |
| req.is_half_rate = 1; |
| |
| req.chan_offset = add_bss->currentExtChannel; |
| req.vht_capable = add_bss->vhtCapable; |
| #if defined WLAN_FEATURE_VOWIFI |
| req.max_txpow = add_bss->maxTxPower; |
| maxTxPower = add_bss->maxTxPower; |
| #else |
| req.max_txpow = 0; |
| maxTxPower = 0; |
| #endif |
| #ifdef WLAN_FEATURE_11W |
| if (add_bss->rmfEnabled) { |
| /* |
| * when 802.11w PMF is enabled for hw encr/decr |
| * use hw MFP Qos bits 0x10 |
| */ |
| ret = wmi_unified_pdev_set_param(wma->wmi_handle, |
| WMI_PDEV_PARAM_PMF_QOS, TRUE); |
| if(ret) { |
| WMA_LOGE("%s: Failed to set QOS MFP/PMF (%d)", |
| __func__, ret); |
| } else { |
| WMA_LOGI("%s: QOS MFP/PMF set to %d", |
| __func__, TRUE); |
| } |
| } |
| #endif /* WLAN_FEATURE_11W */ |
| |
| req.beacon_intval = add_bss->beaconInterval; |
| req.dtim_period = add_bss->dtimPeriod; |
| req.beacon_tx_rate = add_bss->beacon_tx_rate; |
| req.hidden_ssid = add_bss->bHiddenSSIDEn; |
| req.is_dfs = add_bss->bSpectrumMgtEnabled; |
| req.oper_mode = BSS_OPERATIONAL_MODE_AP; |
| req.ssid.length = add_bss->ssId.length; |
| if (req.ssid.length > 0) |
| vos_mem_copy(req.ssid.ssId, add_bss->ssId.ssId, |
| add_bss->ssId.length); |
| |
| status = wma_vdev_start(wma, &req, VOS_FALSE); |
| if (status != VOS_STATUS_SUCCESS) { |
| wma_remove_vdev_req(wma, vdev_id, |
| WMA_TARGET_REQ_TYPE_VDEV_START); |
| goto peer_cleanup; |
| } |
| |
| wma_vdev_set_bss_params(wma, vdev_id, |
| add_bss->beaconInterval, add_bss->dtimPeriod, |
| add_bss->shortSlotTimeSupported, add_bss->llbCoexist, |
| maxTxPower); |
| |
| return; |
| |
| peer_cleanup: |
| wma_remove_peer(wma, add_bss->bssId, vdev_id, peer, |
| VOS_FALSE); |
| send_fail_resp: |
| add_bss->status = VOS_STATUS_E_FAILURE; |
| wma_send_msg(wma, WDA_ADD_BSS_RSP, (void *)add_bss, 0); |
| } |
| |
| #ifdef QCA_IBSS_SUPPORT |
| static VOS_STATUS |
| wma_set_ibss_pwrsave_params(tp_wma_handle wma, u_int8_t vdev_id) |
| { |
| int ret; |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_ATIM_WINDOW_LENGTH, |
| wma->wma_ibss_power_save_params.atimWindowLength); |
| if (ret < 0) { |
| WMA_LOGE("Failed to set WMI_VDEV_PARAM_ATIM_WINDOW_LENGTH ret = %d", |
| ret); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_IS_IBSS_POWER_SAVE_ALLOWED, |
| wma->wma_ibss_power_save_params.isPowerSaveAllowed); |
| if (ret < 0) { |
| WMA_LOGE("Failed, set WMI_VDEV_PARAM_IS_IBSS_POWER_SAVE_ALLOWED ret=%d", |
| ret); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_IS_POWER_COLLAPSE_ALLOWED, |
| wma->wma_ibss_power_save_params.isPowerCollapseAllowed); |
| if (ret < 0) { |
| WMA_LOGE("Failed, set WMI_VDEV_PARAM_IS_POWER_COLLAPSE_ALLOWED ret=%d", |
| ret); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_IS_AWAKE_ON_TXRX_ENABLED, |
| wma->wma_ibss_power_save_params.isAwakeonTxRxEnabled); |
| if (ret < 0) { |
| WMA_LOGE("Failed, set WMI_VDEV_PARAM_IS_AWAKE_ON_TXRX_ENABLED ret=%d", |
| ret); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_INACTIVITY_CNT, |
| wma->wma_ibss_power_save_params.inactivityCount); |
| if (ret < 0) { |
| WMA_LOGE("Failed, set WMI_VDEV_PARAM_INACTIVITY_CNT ret=%d", |
| ret); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_TXSP_END_INACTIVITY_TIME_MS, |
| wma->wma_ibss_power_save_params.txSPEndInactivityTime); |
| if (ret < 0) { |
| WMA_LOGE("Failed, set WMI_VDEV_PARAM_TXSP_END_INACTIVITY_TIME_MS ret=%d", |
| ret); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_IBSS_PS_WARMUP_TIME_SECS, |
| wma->wma_ibss_power_save_params.ibssPsWarmupTime); |
| if (ret < 0) { |
| WMA_LOGE("Failed, set WMI_VDEV_PARAM_IBSS_PS_WARMUP_TIME_SECS ret=%d", |
| ret); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_IBSS_PS_1RX_CHAIN_IN_ATIM_WINDOW_ENABLE, |
| wma->wma_ibss_power_save_params.ibssPs1RxChainInAtimEnable); |
| if (ret < 0) { |
| WMA_LOGE("Failed to set IBSS_PS_1RX_CHAIN_IN_ATIM_WINDOW_ENABLE ret=%d", |
| ret); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static void wma_add_bss_ibss_mode(tp_wma_handle wma, tpAddBssParams add_bss) |
| { |
| ol_txrx_pdev_handle pdev; |
| ol_txrx_vdev_handle vdev; |
| struct wma_vdev_start_req req; |
| ol_txrx_peer_handle peer = NULL; |
| struct wma_target_req *msg; |
| u_int8_t vdev_id, peer_id; |
| VOS_STATUS status; |
| tSetBssKeyParams key_info; |
| u_int8_t nss_2g, nss_5g; |
| |
| WMA_LOGD("%s: add_bss->sessionId = %d", __func__, add_bss->sessionId); |
| vdev_id = add_bss->sessionId; |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to get pdev", __func__); |
| goto send_fail_resp; |
| } |
| |
| nss_2g = wma->interfaces[vdev_id].nss_2g; |
| nss_5g = wma->interfaces[vdev_id].nss_5g; |
| wma_set_bss_rate_flags(&wma->interfaces[vdev_id], add_bss); |
| |
| wma->interfaces[vdev_id].tx_aggregation_size = |
| add_bss->tx_aggregation_size; |
| wma->interfaces[vdev_id].rx_aggregation_size = |
| add_bss->rx_aggregation_size; |
| |
| vdev = wma_find_vdev_by_id(wma, vdev_id); |
| if (!vdev) { |
| WMA_LOGE("%s: vdev not found for vdev id %d.", |
| __func__, vdev_id); |
| goto send_fail_resp; |
| } |
| |
| /* create ibss bss peer */ |
| status = wma_create_peer(wma, pdev, vdev, add_bss->selfMacAddr, |
| WMI_PEER_TYPE_DEFAULT, vdev_id, |
| VOS_FALSE); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s: Failed to create peer", __func__); |
| goto send_fail_resp; |
| } |
| WMA_LOGA("IBSS BSS peer created with mac %pM", add_bss->selfMacAddr); |
| |
| peer = ol_txrx_find_peer_by_addr(pdev, add_bss->selfMacAddr, &peer_id); |
| if (!peer) { |
| WMA_LOGE("%s Failed to find peer %pM", __func__, |
| add_bss->selfMacAddr); |
| goto send_fail_resp; |
| } |
| |
| /* clear leftover ibss keys on bss peer */ |
| |
| WMA_LOGD("%s: ibss bss key clearing", __func__); |
| vos_mem_set(&key_info, sizeof(key_info), 0); |
| key_info.smesessionId = vdev_id; |
| key_info.numKeys = SIR_MAC_MAX_NUM_OF_DEFAULT_KEYS; |
| vos_mem_copy(&wma->ibsskey_info, &key_info, sizeof(tSetBssKeyParams)); |
| |
| /* start ibss vdev */ |
| |
| add_bss->operMode = BSS_OPERATIONAL_MODE_IBSS; |
| |
| msg = wma_fill_vdev_req(wma, vdev_id, WDA_ADD_BSS_REQ, |
| WMA_TARGET_REQ_TYPE_VDEV_START, add_bss, |
| WMA_VDEV_START_REQUEST_TIMEOUT); |
| if (!msg) { |
| WMA_LOGP("%s Failed to allocate vdev request vdev_id %d", |
| __func__, vdev_id); |
| goto peer_cleanup; |
| } |
| WMA_LOGD("%s: vdev start request for IBSS enqueued", __func__); |
| |
| add_bss->staContext.staIdx = ol_txrx_local_peer_id(peer); |
| |
| /* |
| * If IBSS Power Save is supported by firmware |
| * set the IBSS power save params to firmware. |
| */ |
| if (WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_IBSS_PWRSAVE)) { |
| status = wma_set_ibss_pwrsave_params(wma, vdev_id); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s: Failed to Set IBSS Power Save Params to firmware", |
| __func__); |
| goto peer_cleanup; |
| } |
| } |
| |
| |
| vos_mem_zero(&req, sizeof(req)); |
| req.vdev_id = vdev_id; |
| req.chan = add_bss->currentOperChannel; |
| req.chan_offset = add_bss->currentExtChannel; |
| req.vht_capable = add_bss->vhtCapable; |
| #if defined WLAN_FEATURE_VOWIF |
| req.max_txpow = add_bss->maxTxPower; |
| #else |
| req.max_txpow = 0; |
| #endif |
| req.beacon_intval = add_bss->beaconInterval; |
| req.dtim_period = add_bss->dtimPeriod; |
| req.hidden_ssid = add_bss->bHiddenSSIDEn; |
| req.is_dfs = add_bss->bSpectrumMgtEnabled; |
| req.oper_mode = BSS_OPERATIONAL_MODE_IBSS; |
| req.ssid.length = add_bss->ssId.length; |
| if (req.ssid.length > 0) |
| vos_mem_copy(req.ssid.ssId, add_bss->ssId.ssId, |
| add_bss->ssId.length); |
| |
| WMA_LOGD("%s: chan %d chan_offset %d", __func__, req.chan, req.chan_offset); |
| WMA_LOGD("%s: ssid = %s", __func__, req.ssid.ssId); |
| |
| status = wma_vdev_start(wma, &req, VOS_FALSE); |
| if (status != VOS_STATUS_SUCCESS) { |
| wma_remove_vdev_req(wma, vdev_id, |
| WMA_TARGET_REQ_TYPE_VDEV_START); |
| goto peer_cleanup; |
| } |
| WMA_LOGD("%s: vdev start request for IBSS sent to target", __func__); |
| |
| /* Initialize protection mode to no protection */ |
| if (wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_PROTECTION_MODE, |
| IEEE80211_PROT_NONE)) { |
| WMA_LOGE("Failed to initialize protection mode"); |
| } |
| |
| return; |
| |
| peer_cleanup: |
| if (peer) { |
| wma_remove_peer(wma, add_bss->bssId, vdev_id, peer, |
| VOS_FALSE); |
| } |
| send_fail_resp: |
| add_bss->status = VOS_STATUS_E_FAILURE; |
| wma_send_msg(wma, WDA_ADD_BSS_RSP, (void *)add_bss, 0); |
| } |
| #endif |
| |
| void wma_set_bss_rate_flags(struct wma_txrx_node *iface, |
| tpAddBssParams add_bss) |
| { |
| iface->rate_flags = 0; |
| |
| #ifdef WLAN_FEATURE_11AC |
| if (add_bss->vhtCapable) { |
| if (add_bss->vhtTxChannelWidthSet) |
| iface->rate_flags |= eHAL_TX_RATE_VHT80; |
| else if (add_bss->txChannelWidthSet) |
| iface->rate_flags |= eHAL_TX_RATE_VHT40; |
| else |
| iface->rate_flags |= eHAL_TX_RATE_VHT20; |
| } |
| /* avoid to conflict with htCapable flag */ |
| else |
| #endif |
| if (add_bss->htCapable) { |
| if (add_bss->txChannelWidthSet) |
| iface->rate_flags |= eHAL_TX_RATE_HT40; |
| else |
| iface->rate_flags |= eHAL_TX_RATE_HT20; |
| } |
| |
| if (add_bss->staContext.fShortGI20Mhz || |
| add_bss->staContext.fShortGI40Mhz) |
| iface->rate_flags |= eHAL_TX_RATE_SGI; |
| |
| if (!add_bss->htCapable && !add_bss->vhtCapable) |
| iface->rate_flags = eHAL_TX_RATE_LEGACY; |
| } |
| |
| static void wma_add_bss_sta_mode(tp_wma_handle wma, tpAddBssParams add_bss) |
| { |
| ol_txrx_pdev_handle pdev; |
| struct wma_vdev_start_req req; |
| struct wma_target_req *msg; |
| u_int8_t vdev_id, peer_id; |
| ol_txrx_peer_handle peer; |
| VOS_STATUS status; |
| struct wma_txrx_node *iface; |
| int ret = 0; |
| int pps_val = 0; |
| v_BOOL_t roam_synch_in_progress = VOS_FALSE; |
| tpAniSirGlobal pMac = (tpAniSirGlobal)vos_get_context(VOS_MODULE_ID_PE, |
| wma->vos_context); |
| |
| if (NULL == pMac) { |
| WMA_LOGE("%s: Unable to get PE context", __func__); |
| goto send_fail_resp; |
| } |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s Failed to get pdev", __func__); |
| goto send_fail_resp; |
| } |
| |
| vdev_id = add_bss->staContext.smesessionId; |
| iface = &wma->interfaces[vdev_id]; |
| |
| wma_set_bss_rate_flags(iface, add_bss); |
| if (add_bss->operMode) { |
| // Save parameters later needed by WDA_ADD_STA_REQ |
| if (iface->addBssStaContext) { |
| adf_os_mem_free(iface->addBssStaContext); |
| } |
| iface->addBssStaContext = adf_os_mem_alloc(NULL, sizeof(tAddStaParams)); |
| if (!iface->addBssStaContext) { |
| WMA_LOGE("%s Failed to allocat memory", __func__); |
| goto send_fail_resp; |
| } |
| adf_os_mem_copy(iface->addBssStaContext, &add_bss->staContext, |
| sizeof(tAddStaParams)); |
| |
| #if defined WLAN_FEATURE_VOWIFI_11R |
| if (iface->staKeyParams) { |
| adf_os_mem_free(iface->staKeyParams); |
| iface->staKeyParams = NULL; |
| } |
| if (add_bss->extSetStaKeyParamValid) { |
| iface->staKeyParams = adf_os_mem_alloc(NULL, sizeof(tSetStaKeyParams)); |
| if (!iface->staKeyParams) { |
| WMA_LOGE("%s Failed to allocat memory", __func__); |
| goto send_fail_resp; |
| } |
| adf_os_mem_copy(iface->staKeyParams, &add_bss->extSetStaKeyParam, |
| sizeof(tSetStaKeyParams)); |
| } |
| #endif |
| // Save parameters later needed by WDA_ADD_STA_REQ |
| iface->rmfEnabled = add_bss->rmfEnabled; |
| iface->beaconInterval = add_bss->beaconInterval; |
| iface->dtimPeriod = add_bss->dtimPeriod; |
| iface->llbCoexist = add_bss->llbCoexist; |
| iface->shortSlotTimeSupported = add_bss->shortSlotTimeSupported; |
| iface->nwType = add_bss->nwType; |
| if(add_bss->nonRoamReassoc) { |
| peer = ol_txrx_find_peer_by_addr(pdev, add_bss->bssId, &peer_id); |
| if(peer) { |
| add_bss->staContext.staIdx = ol_txrx_local_peer_id(peer); |
| goto send_bss_resp; |
| } |
| } |
| if (add_bss->reassocReq) { |
| #ifdef QCA_SUPPORT_TXRX_VDEV_PAUSE_LL |
| ol_txrx_vdev_handle vdev; |
| #endif |
| // Called in preassoc state. BSSID peer is already added by set_linkstate |
| peer = ol_txrx_find_peer_by_addr(pdev, add_bss->bssId, &peer_id); |
| if (!peer) { |
| WMA_LOGE("%s Failed to find peer %pM", __func__, |
| add_bss->bssId); |
| goto send_fail_resp; |
| } |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| if(iface->roam_synch_in_progress) { |
| add_bss->staContext.staIdx = ol_txrx_local_peer_id(peer); |
| goto send_bss_resp; |
| } |
| #endif |
| msg = wma_fill_vdev_req(wma, vdev_id, WDA_ADD_BSS_REQ, |
| WMA_TARGET_REQ_TYPE_VDEV_START, |
| add_bss, |
| WMA_VDEV_START_REQUEST_TIMEOUT); |
| if (!msg) { |
| WMA_LOGP("%s Failed to allocate vdev request vdev_id %d", |
| __func__, vdev_id); |
| goto peer_cleanup; |
| } |
| |
| add_bss->staContext.staIdx = ol_txrx_local_peer_id(peer); |
| |
| vos_mem_zero(&req, sizeof(req)); |
| req.vdev_id = vdev_id; |
| req.chan = add_bss->currentOperChannel; |
| req.chan_offset = add_bss->currentExtChannel; |
| req.channelwidth = add_bss->channelwidth; |
| |
| if (add_bss->channelwidth == CH_WIDTH_5MHZ) |
| req.is_quarter_rate = 1; |
| else if (add_bss->channelwidth == CH_WIDTH_10MHZ) |
| req.is_half_rate = 1; |
| |
| #if defined WLAN_FEATURE_VOWIFI |
| req.max_txpow = add_bss->maxTxPower; |
| #else |
| req.max_txpow = 0; |
| #endif |
| req.beacon_intval = add_bss->beaconInterval; |
| req.dtim_period = add_bss->dtimPeriod; |
| req.hidden_ssid = add_bss->bHiddenSSIDEn; |
| req.is_dfs = add_bss->bSpectrumMgtEnabled; |
| req.ssid.length = add_bss->ssId.length; |
| req.oper_mode = BSS_OPERATIONAL_MODE_STA; |
| if (req.ssid.length > 0) |
| vos_mem_copy(req.ssid.ssId, add_bss->ssId.ssId, |
| add_bss->ssId.length); |
| |
| status = wma_vdev_start(wma, &req, VOS_FALSE); |
| if (status != VOS_STATUS_SUCCESS) { |
| wma_remove_vdev_req(wma, vdev_id, |
| WMA_TARGET_REQ_TYPE_VDEV_START); |
| goto peer_cleanup; |
| } |
| #ifdef QCA_SUPPORT_TXRX_VDEV_PAUSE_LL |
| vdev = wma_find_vdev_by_id(wma, vdev_id); |
| if (!vdev) { |
| WMA_LOGE("%s Invalid txrx vdev", __func__); |
| goto peer_cleanup; |
| } |
| wdi_in_vdev_pause(vdev, |
| OL_TXQ_PAUSE_REASON_PEER_UNAUTHORIZED); |
| #endif |
| // ADD_BSS_RESP will be deferred to completion of VDEV_START |
| |
| return; |
| } |
| if (!add_bss->updateBss) { |
| goto send_bss_resp; |
| |
| } |
| /* Update peer state */ |
| if (add_bss->staContext.encryptType == eSIR_ED_NONE) { |
| WMA_LOGD("%s: Update peer(%pM) state into auth", |
| __func__, add_bss->bssId); |
| ol_txrx_peer_state_update(pdev, add_bss->bssId, |
| ol_txrx_peer_state_auth); |
| } else { |
| #ifdef QCA_SUPPORT_TXRX_VDEV_PAUSE_LL |
| ol_txrx_vdev_handle vdev; |
| #endif |
| WMA_LOGD("%s: Update peer(%pM) state into conn", |
| __func__, add_bss->bssId); |
| ol_txrx_peer_state_update(pdev, add_bss->bssId, |
| ol_txrx_peer_state_conn); |
| #ifdef QCA_SUPPORT_TXRX_VDEV_PAUSE_LL |
| peer = ol_txrx_find_peer_by_addr(pdev, add_bss->bssId, &peer_id); |
| if (!peer) { |
| WMA_LOGE("%s:%d Failed to find peer %pM", __func__, |
| __LINE__, add_bss->bssId); |
| goto send_fail_resp; |
| } |
| |
| vdev = wma_find_vdev_by_id(wma, vdev_id); |
| if (!vdev) { |
| WMA_LOGE("%s Invalid txrx vdev", __func__); |
| goto peer_cleanup; |
| } |
| wdi_in_vdev_pause(vdev, |
| OL_TXQ_PAUSE_REASON_PEER_UNAUTHORIZED); |
| #endif |
| } |
| |
| wmi_unified_send_txbf(wma, &add_bss->staContext); |
| |
| pps_val = ((pMac->enable5gEBT << 31) & 0xffff0000) | (PKT_PWR_SAVE_5G_EBT & 0xffff); |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_PACKET_POWERSAVE, |
| pps_val); |
| if (ret) |
| WMA_LOGE("Failed to send wmi packet power save cmd"); |
| else |
| WMA_LOGD("Sent PKT_PWR_SAVE_5G_EBT cmd to target, val = %x, ret = %d", |
| pps_val, ret); |
| |
| wmi_unified_send_peer_assoc(wma, add_bss->nwType, |
| &add_bss->staContext); |
| #ifdef WLAN_FEATURE_11W |
| if (add_bss->rmfEnabled) { |
| /* when 802.11w PMF is enabled for hw encr/decr |
| use hw MFP Qos bits 0x10 */ |
| ret = wmi_unified_pdev_set_param(wma->wmi_handle, |
| WMI_PDEV_PARAM_PMF_QOS, TRUE); |
| if(ret) { |
| WMA_LOGE("%s: Failed to set QOS MFP/PMF (%d)", |
| __func__, ret); |
| } else { |
| WMA_LOGI("%s: QOS MFP/PMF set to %d", |
| __func__, TRUE); |
| } |
| } |
| #endif /* WLAN_FEATURE_11W */ |
| |
| wma_vdev_set_bss_params(wma, add_bss->staContext.smesessionId, |
| add_bss->beaconInterval, add_bss->dtimPeriod, |
| add_bss->shortSlotTimeSupported, add_bss->llbCoexist, |
| add_bss->maxTxPower); |
| |
| /* |
| * Store the bssid in interface table, bssid will |
| * be used during group key setting sta mode. |
| */ |
| vos_mem_copy(iface->bssid, add_bss->bssId, ETH_ALEN); |
| |
| } |
| send_bss_resp: |
| ol_txrx_find_peer_by_addr(pdev, add_bss->bssId, |
| &add_bss->staContext.staIdx); |
| add_bss->status = |
| (add_bss->staContext.staIdx == HAL_STA_INVALID_IDX) ? |
| VOS_STATUS_E_FAILURE : VOS_STATUS_SUCCESS; |
| add_bss->bssIdx = add_bss->staContext.smesessionId; |
| vos_mem_copy(add_bss->staContext.staMac, add_bss->bssId, |
| sizeof(add_bss->staContext.staMac)); |
| WMA_LOGD("%s: opermode %d update_bss %d nw_type %d bssid %pM" |
| " staIdx %d status %d", __func__, add_bss->operMode, |
| add_bss->updateBss, add_bss->nwType, add_bss->bssId, |
| add_bss->staContext.staIdx, add_bss->status); |
| wma_send_msg(wma, WDA_ADD_BSS_RSP, (void *)add_bss, 0); |
| return; |
| |
| peer_cleanup: |
| wma_remove_peer(wma, add_bss->bssId, vdev_id, peer, |
| roam_synch_in_progress); |
| send_fail_resp: |
| add_bss->status = VOS_STATUS_E_FAILURE; |
| wma_send_msg(wma, WDA_ADD_BSS_RSP, (void *)add_bss, 0); |
| } |
| |
| static void wma_add_bss(tp_wma_handle wma, tpAddBssParams params) |
| { |
| WMA_LOGD("%s: add_bss_param.halPersona = %d", |
| __func__, params->halPersona); |
| |
| switch(params->halPersona) { |
| |
| /*If current bring up SAP or P2P channel matches the previous |
| *radar found channel then reset the last_radar_found_chan |
| *variable to avoid race conditions. |
| */ |
| case VOS_STA_SAP_MODE: |
| case VOS_P2P_GO_MODE: |
| if (params->currentOperChannel == |
| wma->dfs_ic->last_radar_found_chan) |
| wma->dfs_ic->last_radar_found_chan = 0; |
| wma_add_bss_ap_mode(wma, params); |
| break; |
| |
| #ifdef QCA_IBSS_SUPPORT |
| case VOS_IBSS_MODE: |
| wma_add_bss_ibss_mode(wma, params); |
| break; |
| #endif |
| |
| case VOS_NDI_MODE: |
| wma_add_bss_ndi_mode(wma, params); |
| break; |
| |
| default: |
| wma_add_bss_sta_mode(wma, params); |
| break; |
| } |
| } |
| |
| static int wmi_unified_vdev_up_send(wmi_unified_t wmi, |
| u_int8_t vdev_id, u_int16_t aid, |
| u_int8_t bssid[IEEE80211_ADDR_LEN]) |
| { |
| wmi_vdev_up_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len = sizeof(*cmd); |
| |
| WMA_LOGD("%s: VDEV_UP", __func__); |
| WMA_LOGD("%s: vdev_id %d aid %d bssid %pM", __func__, |
| vdev_id, aid, bssid); |
| buf = wmi_buf_alloc(wmi, len); |
| if (!buf) { |
| WMA_LOGP("%s: wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| cmd = (wmi_vdev_up_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_up_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_vdev_up_cmd_fixed_param)); |
| cmd->vdev_id = vdev_id; |
| cmd->vdev_assoc_id = aid; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(bssid, &cmd->vdev_bssid); |
| if (wmi_unified_cmd_send(wmi, buf, len, WMI_VDEV_UP_CMDID)) { |
| WMA_LOGP("%s: Failed to send vdev up command", __func__); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static int32_t wmi_unified_set_ap_ps_param(void *wma_ctx, u_int32_t vdev_id, |
| u_int8_t *peer_addr, u_int32_t param, u_int32_t value) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) wma_ctx; |
| wmi_ap_ps_peer_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t err; |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, sizeof(*cmd)); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate buffer to send set_ap_ps_param cmd"); |
| return -ENOMEM; |
| } |
| cmd = (wmi_ap_ps_peer_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_ap_ps_peer_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_ap_ps_peer_cmd_fixed_param)); |
| cmd->vdev_id = vdev_id; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(peer_addr, &cmd->peer_macaddr); |
| cmd->param = param; |
| cmd->value = value; |
| err = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| sizeof(*cmd), WMI_AP_PS_PEER_PARAM_CMDID); |
| if (err) { |
| WMA_LOGE("Failed to send set_ap_ps_param cmd"); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static int32_t wma_set_ap_peer_uapsd(tp_wma_handle wma, u_int32_t vdev_id, |
| u_int8_t *peer_addr, u_int8_t uapsd_value, u_int8_t max_sp) |
| { |
| u_int32_t uapsd = 0; |
| u_int32_t max_sp_len = 0; |
| int32_t ret = 0; |
| |
| if (uapsd_value & UAPSD_VO_ENABLED) { |
| uapsd |= WMI_AP_PS_UAPSD_AC3_DELIVERY_EN | |
| WMI_AP_PS_UAPSD_AC3_TRIGGER_EN; |
| } |
| |
| if (uapsd_value & UAPSD_VI_ENABLED) { |
| uapsd |= WMI_AP_PS_UAPSD_AC2_DELIVERY_EN | |
| WMI_AP_PS_UAPSD_AC2_TRIGGER_EN; |
| } |
| |
| if (uapsd_value & UAPSD_BK_ENABLED) { |
| uapsd |= WMI_AP_PS_UAPSD_AC1_DELIVERY_EN | |
| WMI_AP_PS_UAPSD_AC1_TRIGGER_EN; |
| } |
| |
| if (uapsd_value & UAPSD_BE_ENABLED) { |
| uapsd |= WMI_AP_PS_UAPSD_AC0_DELIVERY_EN | |
| WMI_AP_PS_UAPSD_AC0_TRIGGER_EN; |
| } |
| |
| switch (max_sp) { |
| case UAPSD_MAX_SP_LEN_2: |
| max_sp_len = WMI_AP_PS_PEER_PARAM_MAX_SP_2; |
| break; |
| case UAPSD_MAX_SP_LEN_4: |
| max_sp_len = WMI_AP_PS_PEER_PARAM_MAX_SP_4; |
| break; |
| case UAPSD_MAX_SP_LEN_6: |
| max_sp_len = WMI_AP_PS_PEER_PARAM_MAX_SP_6; |
| break; |
| default: |
| max_sp_len = WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED; |
| break; |
| } |
| |
| WMA_LOGD("Set WMI_AP_PS_PEER_PARAM_UAPSD 0x%x for %pM", |
| uapsd, peer_addr); |
| |
| ret = wmi_unified_set_ap_ps_param(wma, vdev_id, |
| peer_addr, |
| WMI_AP_PS_PEER_PARAM_UAPSD, |
| uapsd); |
| if (ret) { |
| WMA_LOGE("Failed to set WMI_AP_PS_PEER_PARAM_UAPSD for %pM", |
| peer_addr); |
| return ret; |
| } |
| |
| WMA_LOGD("Set WMI_AP_PS_PEER_PARAM_MAX_SP 0x%x for %pM", |
| max_sp_len, peer_addr); |
| |
| ret = wmi_unified_set_ap_ps_param(wma, vdev_id, |
| peer_addr, |
| WMI_AP_PS_PEER_PARAM_MAX_SP, |
| max_sp_len); |
| if (ret) { |
| WMA_LOGE("Failed to set WMI_AP_PS_PEER_PARAM_MAX_SP for %pM", |
| peer_addr); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static void wma_add_sta_req_ap_mode(tp_wma_handle wma, tpAddStaParams add_sta) |
| { |
| enum ol_txrx_peer_state state = ol_txrx_peer_state_conn; |
| ol_txrx_pdev_handle pdev; |
| ol_txrx_vdev_handle vdev; |
| ol_txrx_peer_handle peer; |
| u_int8_t peer_id; |
| VOS_STATUS status; |
| int32_t ret; |
| struct wma_txrx_node *iface = NULL; |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to find pdev", __func__); |
| add_sta->status = VOS_STATUS_E_FAILURE; |
| goto send_rsp; |
| } |
| /* UMAC sends WDA_ADD_STA_REQ msg twice to WMA when the station |
| * associates. First WDA_ADD_STA_REQ will have staType as |
| * STA_ENTRY_PEER and second posting will have STA_ENTRY_SELF. |
| * Peer creation is done in first WDA_ADD_STA_REQ and second |
| * WDA_ADD_STA_REQ which has STA_ENTRY_SELF is ignored and |
| * send fake response with success to UMAC. Otherwise UMAC |
| * will get blocked. |
| */ |
| if (add_sta->staType != STA_ENTRY_PEER) { |
| add_sta->status = VOS_STATUS_SUCCESS; |
| goto send_rsp; |
| } |
| |
| vdev = wma_find_vdev_by_id(wma, add_sta->smesessionId); |
| if (!vdev) { |
| WMA_LOGE("%s: Failed to find vdev", __func__); |
| add_sta->status = VOS_STATUS_E_FAILURE; |
| goto send_rsp; |
| } |
| |
| iface = &wma->interfaces[vdev->vdev_id]; |
| peer = ol_txrx_find_peer_by_addr_and_vdev(pdev, |
| vdev, |
| add_sta->staMac, |
| &peer_id); |
| if (peer) { |
| wma_remove_peer(wma, add_sta->staMac, add_sta->smesessionId, |
| peer, VOS_FALSE); |
| WMA_LOGE("%s: Peer already exists, Deleted peer with peer_addr %pM", |
| __func__, add_sta->staMac); |
| } |
| /* The code above only checks the peer existence on its own vdev. |
| * Need to check whether the peer exists on other vDevs because firmware |
| * can't create the peer if the peer with same MAC address already |
| * exists on the pDev. As this peer belongs to other vDevs, just return |
| * here. |
| */ |
| peer = ol_txrx_find_peer_by_addr(pdev, add_sta->staMac, &peer_id); |
| if (peer) { |
| WMA_LOGE("%s: My vdev:%d, but Peer exists on other vdev with " |
| "peer_addr %pM and peer_id %d", |
| __func__, vdev->vdev_id, add_sta->staMac, peer_id); |
| add_sta->status = VOS_STATUS_E_FAILURE; |
| goto send_rsp; |
| } |
| status = wma_create_peer(wma, pdev, vdev, add_sta->staMac, |
| WMI_PEER_TYPE_DEFAULT, add_sta->smesessionId, |
| VOS_FALSE); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s: Failed to create peer for %pM", |
| __func__, add_sta->staMac); |
| add_sta->status = status; |
| goto send_rsp; |
| } |
| |
| peer = ol_txrx_find_peer_by_addr_and_vdev(pdev, |
| vdev, |
| add_sta->staMac, |
| &peer_id); |
| if (!peer) { |
| WMA_LOGE("%s: Failed to find peer handle using peer mac %pM", |
| __func__, add_sta->staMac); |
| add_sta->status = VOS_STATUS_E_FAILURE; |
| wma_remove_peer(wma, add_sta->staMac, add_sta->smesessionId, |
| peer, VOS_FALSE); |
| goto send_rsp; |
| } |
| |
| wmi_unified_send_txbf(wma, add_sta); |
| |
| ret = wmi_unified_send_peer_assoc(wma, add_sta->nwType, add_sta); |
| if (ret) { |
| add_sta->status = VOS_STATUS_E_FAILURE; |
| wma_remove_peer(wma, add_sta->staMac, add_sta->smesessionId, |
| peer, VOS_FALSE); |
| goto send_rsp; |
| } |
| |
| #ifdef QCA_IBSS_SUPPORT |
| /* |
| * In IBSS mode send the peer |
| * Atim Window length if IBSS |
| * power save is enabled by the |
| * firmware. |
| */ |
| if ( wma_is_vdev_in_ibss_mode(wma, add_sta->smesessionId) && |
| WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_IBSS_PWRSAVE) ) { |
| /* |
| * If ATIM Window is present in the peer |
| * beacon then send it to firmware else |
| * configure Zero ATIM Window length to |
| * firmware. |
| */ |
| if(add_sta->atimIePresent) { |
| wma_set_peer_param(wma, add_sta->staMac, |
| WMI_PEER_IBSS_ATIM_WINDOW_LENGTH, |
| add_sta->peerAtimWindowLength, |
| add_sta->smesessionId); |
| } |
| else { |
| wma_set_peer_param(wma, add_sta->staMac, |
| WMI_PEER_IBSS_ATIM_WINDOW_LENGTH, |
| 0, |
| add_sta->smesessionId); |
| } |
| } |
| #endif |
| |
| #ifdef WLAN_FEATURE_11W |
| if (add_sta->rmfEnabled) { |
| /* |
| * We have to store the state of PMF connection |
| * per STA for SAP case |
| * We will isolate the ifaces based on vdevid |
| */ |
| iface->rmfEnabled = add_sta->rmfEnabled; |
| /* |
| * when 802.11w PMF is enabled for hw encr/decr |
| * use hw MFP Qos bits 0x10 |
| */ |
| ret = wmi_unified_pdev_set_param(wma->wmi_handle, |
| WMI_PDEV_PARAM_PMF_QOS, TRUE); |
| if(ret) { |
| WMA_LOGE("%s: Failed to set QOS MFP/PMF (%d)", |
| __func__, ret); |
| } |
| else { |
| WMA_LOGI("%s: QOS MFP/PMF set to %d", |
| __func__, TRUE); |
| } |
| } |
| #endif /* WLAN_FEATURE_11W */ |
| |
| if (add_sta->uAPSD) { |
| ret = wma_set_ap_peer_uapsd(wma, add_sta->smesessionId, |
| add_sta->staMac, |
| add_sta->uAPSD, |
| add_sta->maxSPLen); |
| if (ret) { |
| WMA_LOGE("Failed to set peer uapsd param for %pM", |
| add_sta->staMac); |
| add_sta->status = VOS_STATUS_E_FAILURE; |
| wma_remove_peer(wma, add_sta->staMac, |
| add_sta->smesessionId, peer, |
| VOS_FALSE); |
| goto send_rsp; |
| } |
| } |
| |
| WMA_LOGD("%s: Moving peer %pM to state %d", |
| __func__, add_sta->staMac, state); |
| ol_txrx_peer_state_update(pdev, add_sta->staMac, state); |
| |
| add_sta->staIdx = ol_txrx_local_peer_id(peer); |
| add_sta->nss = iface->nss; |
| add_sta->status = VOS_STATUS_SUCCESS; |
| send_rsp: |
| WMA_LOGD("%s: Sending add sta rsp to umac (mac:%pM, status:%d)", |
| __func__, add_sta->staMac, add_sta->status); |
| wma_send_msg(wma, WDA_ADD_STA_RSP, (void *)add_sta, 0); |
| } |
| |
| static int wmi_unified_nat_keepalive_enable(tp_wma_handle wma, |
| u_int8_t vdev_id) |
| { |
| WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMD_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len = sizeof(*cmd); |
| |
| WMA_LOGD("%s: vdev_id %d", __func__, vdev_id); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| cmd = (WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMD_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMD_fixed_param)); |
| cmd->vdev_id = vdev_id; |
| cmd->action = IPSEC_NATKEEPALIVE_FILTER_ENABLE; |
| if (wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_VDEV_IPSEC_NATKEEPALIVE_FILTER_CMDID)) { |
| WMA_LOGP("%s: Failed to send NAT keepalive enable command", |
| __func__); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static int wmi_unified_csa_offload_enable(tp_wma_handle wma, |
| u_int8_t vdev_id) |
| { |
| wmi_csa_offload_enable_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len = sizeof(*cmd); |
| |
| WMA_LOGD("%s: vdev_id %d", __func__, vdev_id); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| cmd = (wmi_csa_offload_enable_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_csa_offload_enable_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_csa_offload_enable_cmd_fixed_param)); |
| cmd->vdev_id = vdev_id; |
| cmd->csa_offload_enable = WMI_CSA_OFFLOAD_ENABLE; |
| if (wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_CSA_OFFLOAD_ENABLE_CMDID)) { |
| WMA_LOGP("%s: Failed to send CSA offload enable command", |
| __func__); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| #ifdef QCA_IBSS_SUPPORT |
| |
| static u_int16_t wma_calc_ibss_heart_beat_timer(int16_t peer_num) |
| { |
| /* heart beat timer value look-up table */ |
| /* entry index : (the number of currently connected peers) - 1 |
| entry value : the heart time threshold value in seconds for |
| detecting ibss peer departure */ |
| static const u_int16_t heart_beat_timer[HDD_MAX_NUM_IBSS_STA] = { |
| 4, 4, 4, 4, 4, 4, 4, 4, |
| 8, 8, 8, 8, 8, 8, 8, 8, |
| 12, 12, 12, 12, 12, 12, 12, 12, |
| 16, 16, 16, 16, 16, 16, 16, 16}; |
| |
| if (peer_num < 1 || peer_num > HDD_MAX_NUM_IBSS_STA) |
| return 0; |
| |
| return heart_beat_timer[peer_num - 1]; |
| |
| } |
| |
| static void wma_adjust_ibss_heart_beat_timer(tp_wma_handle wma, |
| u_int8_t vdev_id, |
| int8_t peer_num_delta) |
| { |
| ol_txrx_vdev_handle vdev; |
| int16_t new_peer_num; |
| u_int16_t new_timer_value_sec; |
| u_int32_t new_timer_value_ms; |
| |
| if (peer_num_delta != 1 && peer_num_delta != -1) { |
| WMA_LOGE("Invalid peer_num_delta value %d", peer_num_delta); |
| return; |
| } |
| |
| vdev = wma_find_vdev_by_id(wma, vdev_id); |
| if (!vdev) { |
| WMA_LOGE("vdev not found : vdev_id %d", vdev_id); |
| return; |
| } |
| |
| new_peer_num = vdev->ibss_peer_num + peer_num_delta; |
| if (new_peer_num > HDD_MAX_NUM_IBSS_STA || new_peer_num < 0) { |
| WMA_LOGE("new peer num %d out of valid boundary", new_peer_num); |
| return; |
| } |
| |
| /* adjust peer numbers */ |
| vdev->ibss_peer_num = new_peer_num; |
| |
| /* reset timer value if all peers departed */ |
| if (new_peer_num == 0) { |
| vdev->ibss_peer_heart_beat_timer = 0; |
| return; |
| } |
| |
| /* calculate new timer value */ |
| new_timer_value_sec = wma_calc_ibss_heart_beat_timer(new_peer_num); |
| if (new_timer_value_sec == 0) { |
| WMA_LOGE("timer value %d is invalid for peer number %d", |
| new_timer_value_sec, new_peer_num); |
| return; |
| } |
| if (new_timer_value_sec == vdev->ibss_peer_heart_beat_timer) { |
| WMA_LOGD("timer value %d stays same, no need to notify target", |
| new_timer_value_sec); |
| return; |
| } |
| |
| /* send new timer value to target */ |
| vdev->ibss_peer_heart_beat_timer = new_timer_value_sec; |
| |
| new_timer_value_ms = ((u_int32_t)new_timer_value_sec) * 1000; |
| |
| if (wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_IBSS_MAX_BCN_LOST_MS, |
| new_timer_value_ms)) { |
| WMA_LOGE("Failed to set IBSS link monitoring timer value"); |
| return; |
| } |
| |
| WMA_LOGD("Set IBSS link monitor timer: peer_num = %d timer_value = %d", |
| new_peer_num, new_timer_value_ms); |
| } |
| |
| #endif /* QCA_IBSS_SUPPORT */ |
| |
| #ifdef FEATURE_WLAN_TDLS |
| static void wma_add_tdls_sta(tp_wma_handle wma, tpAddStaParams add_sta) |
| { |
| ol_txrx_pdev_handle pdev; |
| ol_txrx_vdev_handle vdev; |
| ol_txrx_peer_handle peer; |
| u_int8_t peer_id; |
| VOS_STATUS status; |
| int32_t ret; |
| tTdlsPeerStateParams *peerStateParams; |
| |
| WMA_LOGD("%s: staType: %d, staIdx: %d, updateSta: %d, " |
| "bssId: %pM, staMac: %pM", |
| __func__, add_sta->staType, add_sta->staIdx, |
| add_sta->updateSta, add_sta->bssId, add_sta->staMac); |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to find pdev", __func__); |
| add_sta->status = VOS_STATUS_E_FAILURE; |
| goto send_rsp; |
| } |
| |
| vdev = wma_find_vdev_by_id(wma, add_sta->smesessionId); |
| if (!vdev) { |
| WMA_LOGE("%s: Failed to find vdev", __func__); |
| add_sta->status = VOS_STATUS_E_FAILURE; |
| goto send_rsp; |
| } |
| |
| if (0 == add_sta->updateSta) { |
| /* its a add sta request **/ |
| #if defined(CONFIG_HL_SUPPORT) |
| if (vdev->last_real_peer && |
| (adf_os_mem_cmp((u8 *)add_sta->bssId, |
| vdev->last_real_peer->mac_addr.raw, |
| IEEE80211_ADDR_LEN) == 0)) { |
| adf_os_mem_copy(vdev->hl_tdls_ap_mac_addr.raw, |
| vdev->last_real_peer->mac_addr.raw, |
| OL_TXRX_MAC_ADDR_LEN); |
| } |
| #endif |
| WMA_LOGD("%s: addSta, calling wma_create_peer for %pM, vdev_id %hu", |
| __func__, add_sta->staMac, add_sta->smesessionId); |
| |
| status = wma_create_peer(wma, pdev, vdev, add_sta->staMac, |
| WMI_PEER_TYPE_TDLS, add_sta->smesessionId, |
| VOS_FALSE); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s: Failed to create peer for %pM", |
| __func__, add_sta->staMac); |
| add_sta->status = status; |
| goto send_rsp; |
| } |
| |
| peer = ol_txrx_find_peer_by_addr(pdev, add_sta->staMac, &peer_id); |
| if (!peer) { |
| WMA_LOGE("%s: addSta, failed to find peer handle for mac %pM", |
| __func__, add_sta->staMac); |
| add_sta->status = VOS_STATUS_E_FAILURE; |
| wma_remove_peer(wma, add_sta->staMac, add_sta->smesessionId, peer, |
| VOS_FALSE); |
| #if defined(CONFIG_HL_SUPPORT) |
| if (vdev->last_real_peer == NULL) { |
| peer = NULL; |
| peer = ol_txrx_find_peer_by_addr(pdev, vdev->hl_tdls_ap_mac_addr.raw, &peer_id); |
| if (peer && (peer->peer_ids[0] != HTT_INVALID_PEER_ID)) |
| vdev->last_real_peer = peer; |
| } |
| #endif |
| goto send_rsp; |
| } |
| |
| add_sta->staIdx = ol_txrx_local_peer_id(peer); |
| WMA_LOGD("%s: addSta, after calling ol_txrx_local_peer_id, " |
| "staIdx: %d, staMac: %pM", |
| __func__, add_sta->staIdx, add_sta->staMac); |
| |
| peerStateParams = vos_mem_malloc(sizeof(tTdlsPeerStateParams)); |
| if (!peerStateParams) { |
| WMA_LOGE("%s: Failed to allocate memory for peerStateParams for %pM", |
| __func__, add_sta->staMac); |
| add_sta->status = VOS_STATUS_E_FAILURE; |
| goto send_rsp; |
| } |
| |
| vos_mem_zero(peerStateParams, sizeof(*peerStateParams)); |
| peerStateParams->peerState = WMI_TDLS_PEER_STATE_PEERING; |
| peerStateParams->vdevId = vdev->vdev_id; |
| vos_mem_copy(&peerStateParams->peerMacAddr, |
| &add_sta->staMac, |
| sizeof(tSirMacAddr)); |
| wma_update_tdls_peer_state(wma, peerStateParams); |
| } else { |
| /* its a change sta request **/ |
| peer = ol_txrx_find_peer_by_addr(pdev, add_sta->staMac, &peer_id); |
| if (!peer) { |
| WMA_LOGE("%s: changeSta,failed to find peer handle for mac %pM", |
| __func__, add_sta->staMac); |
| add_sta->status = VOS_STATUS_E_FAILURE; |
| wma_remove_peer(wma, add_sta->staMac, add_sta->smesessionId, peer, |
| VOS_FALSE); |
| #if defined(CONFIG_HL_SUPPORT) |
| if (vdev->last_real_peer == NULL) { |
| peer = NULL; |
| peer = ol_txrx_find_peer_by_addr(pdev, vdev->hl_tdls_ap_mac_addr.raw, &peer_id); |
| if (peer && (peer->peer_ids[0] != HTT_INVALID_PEER_ID)) |
| vdev->last_real_peer = peer; |
| } |
| #endif |
| goto send_rsp; |
| } |
| |
| WMA_LOGD("%s: changeSta, calling wmi_unified_send_peer_assoc", |
| __func__); |
| |
| ret = wmi_unified_send_peer_assoc(wma, add_sta->nwType, add_sta); |
| if (ret) { |
| add_sta->status = VOS_STATUS_E_FAILURE; |
| wma_remove_peer(wma, add_sta->staMac, add_sta->smesessionId, peer, |
| VOS_FALSE); |
| #if defined(CONFIG_HL_SUPPORT) |
| if (vdev->last_real_peer == NULL) { |
| peer = NULL; |
| peer = ol_txrx_find_peer_by_addr(pdev, vdev->hl_tdls_ap_mac_addr.raw, &peer_id); |
| if (peer && (peer->peer_ids[0] != HTT_INVALID_PEER_ID)) |
| vdev->last_real_peer = peer; |
| } |
| #endif |
| goto send_rsp; |
| } |
| } |
| |
| send_rsp: |
| WMA_LOGD("%s: Sending add sta rsp to umac (mac:%pM, status:%d), " |
| "staType: %d, staIdx: %d, updateSta: %d", |
| __func__, add_sta->staMac, add_sta->status, |
| add_sta->staType, add_sta->staIdx, add_sta->updateSta); |
| wma_send_msg(wma, WDA_ADD_STA_RSP, (void *)add_sta, 0); |
| } |
| #endif |
| |
| static void wma_add_sta_req_sta_mode(tp_wma_handle wma, tpAddStaParams params) |
| { |
| ol_txrx_pdev_handle pdev; |
| VOS_STATUS status = VOS_STATUS_SUCCESS; |
| ol_txrx_peer_handle peer; |
| struct wma_txrx_node *iface = NULL; |
| tPowerdBm maxTxPower; |
| int ret = 0; |
| int smps_param; |
| |
| #ifdef FEATURE_WLAN_TDLS |
| if (STA_ENTRY_TDLS_PEER == params->staType) |
| { |
| wma_add_tdls_sta(wma, params); |
| return; |
| } |
| #endif |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Unable to get pdev", __func__); |
| goto out; |
| } |
| |
| iface = &wma->interfaces[params->smesessionId]; |
| if (params->staType != STA_ENTRY_SELF) { |
| WMA_LOGP("%s: unsupported station type %d", |
| __func__, params->staType); |
| goto out; |
| } |
| peer = ol_txrx_find_peer_by_addr(pdev, params->bssId, ¶ms->staIdx); |
| if(params->nonRoamReassoc) { |
| ol_txrx_peer_state_update(pdev, params->bssId, |
| ol_txrx_peer_state_auth); |
| adf_os_atomic_set(&iface->bss_status, WMA_BSS_STATUS_STARTED); |
| iface->aid = params->assocId; |
| goto out; |
| } |
| if (wma->interfaces[params->smesessionId].vdev_up == true) { |
| WMA_LOGE("%s: vdev id %d is already UP for %pM", __func__, |
| params->smesessionId, params->bssId); |
| status = VOS_STATUS_E_FAILURE; |
| goto out; |
| } |
| if (peer != NULL && peer->state == ol_txrx_peer_state_disc) { |
| /* |
| * This is the case for reassociation. |
| * peer state update and peer_assoc is required since it |
| * was not done by WDA_ADD_BSS_REQ. |
| */ |
| |
| /* Update peer state */ |
| if (params->encryptType == eSIR_ED_NONE) { |
| WMA_LOGD("%s: Update peer(%pM) state into auth", |
| __func__, params->bssId); |
| ol_txrx_peer_state_update(pdev, params->bssId, |
| ol_txrx_peer_state_auth); |
| } else { |
| WMA_LOGD("%s: Update peer(%pM) state into conn", |
| __func__, params->bssId); |
| ol_txrx_peer_state_update(pdev, params->bssId, |
| ol_txrx_peer_state_conn); |
| } |
| |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| if(iface->roam_synch_in_progress) |
| { |
| // iface->nss = params->nss; |
| /*In LFR2.0, the following operations are performed as |
| * part of wmi_unified_send_peer_assoc. As we are |
| * skipping this operation, we are just executing the |
| * following which are useful for LFR3.0.*/ |
| ol_txrx_peer_state_update(pdev, params->bssId, |
| ol_txrx_peer_state_auth); |
| adf_os_atomic_set(&iface->bss_status, WMA_BSS_STATUS_STARTED); |
| iface->aid = params->assocId; |
| goto out; |
| } |
| #endif |
| wmi_unified_send_txbf(wma, params); |
| |
| ret = wmi_unified_send_peer_assoc(wma, |
| iface->nwType, |
| (tAddStaParams *)iface->addBssStaContext); |
| if (ret) { |
| status = VOS_STATUS_E_FAILURE; |
| wma_remove_peer(wma, params->bssId, |
| params->smesessionId, peer, VOS_FALSE); |
| goto out; |
| } |
| |
| #ifdef WLAN_FEATURE_11W |
| if (params->rmfEnabled) { |
| /* when 802.11w PMF is enabled for hw encr/decr |
| use hw MFP Qos bits 0x10 */ |
| ret = wmi_unified_pdev_set_param(wma->wmi_handle, |
| WMI_PDEV_PARAM_PMF_QOS, TRUE); |
| if(ret) { |
| WMA_LOGE("%s: Failed to set QOS MFP/PMF (%d)", |
| __func__, ret); |
| } else { |
| WMA_LOGI("%s: QOS MFP/PMF set to %d", |
| __func__, TRUE); |
| } |
| } |
| #endif /* WLAN_FEATURE_11W */ |
| #if defined WLAN_FEATURE_VOWIFI_11R |
| /* |
| * Set the PTK in 11r mode because we already have it. |
| */ |
| if (iface->staKeyParams) { |
| wma_set_stakey(wma, (tpSetStaKeyParams) iface->staKeyParams); |
| } |
| #endif |
| } |
| #if defined WLAN_FEATURE_VOWIFI |
| maxTxPower = params->maxTxPower; |
| #else |
| maxTxPower = 0; |
| #endif |
| wma_vdev_set_bss_params(wma, params->smesessionId, iface->beaconInterval, |
| iface->dtimPeriod, iface->shortSlotTimeSupported, |
| iface->llbCoexist, maxTxPower); |
| |
| params->csaOffloadEnable = 0; |
| if (WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_CSA_OFFLOAD)) { |
| params->csaOffloadEnable = 1; |
| if (wmi_unified_csa_offload_enable(wma, params->smesessionId) < 0) { |
| WMA_LOGE("Unable to enable CSA offload for vdev_id:%d", |
| params->smesessionId); |
| } |
| } |
| |
| if (WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE)) { |
| if (wmi_unified_nat_keepalive_enable(wma, params->smesessionId) < 0) { |
| WMA_LOGE("Unable to enable NAT keepalive for vdev_id:%d", |
| params->smesessionId); |
| } |
| } |
| |
| if (wmi_unified_vdev_up_send(wma->wmi_handle, params->smesessionId, |
| params->assocId, params->bssId) < 0) { |
| WMA_LOGP("%s: Failed to send vdev up cmd: vdev %d bssid %pM", |
| __func__, params->smesessionId, params->bssId); |
| status = VOS_STATUS_E_FAILURE; |
| } |
| else { |
| wma->interfaces[params->smesessionId].vdev_up = TRUE; |
| } |
| |
| adf_os_atomic_set(&iface->bss_status, WMA_BSS_STATUS_STARTED); |
| WMA_LOGD("%s: STA mode (type %d subtype %d) BSS is started", |
| __func__, iface->type, iface->sub_type); |
| /* Sta is now associated, configure various params */ |
| |
| /* Send SMPS force command to FW to send the required |
| * action frame. The SM power save is also included |
| * in the assoc request if ht smps is enabled either |
| * from INI or as a result of dynamic antenna switch |
| */ |
| if (params->enableHtSmps) { |
| smps_param = wma_smps_mode_to_force_mode_param( |
| params->htSmpsconfig); |
| if (smps_param >= 0) { |
| WMA_LOGD("%s: Set MIMO power save smps mode %d", |
| __func__, params->htSmpsconfig); |
| wma_set_mimops(wma, params->smesessionId, |
| smps_param); |
| } |
| } |
| |
| #ifdef WLAN_FEATURE_11AC |
| /* Partial AID match power save, enable when SU bformee*/ |
| if (params->enableVhtpAid && params->vhtTxBFCapable) |
| wma_set_ppsconfig(params->smesessionId, |
| WMA_VHT_PPS_PAID_MATCH, 1); |
| #endif |
| |
| /* Enable AMPDU power save, if htCapable/vhtCapable */ |
| if (params->enableAmpduPs && |
| (params->htCapable || params->vhtCapable)) |
| wma_set_ppsconfig(params->smesessionId, |
| WMA_VHT_PPS_DELIM_CRC_FAIL, 1); |
| iface->aid = params->assocId; |
| params->nss = iface->nss; |
| out: |
| params->status = status; |
| /* change logging before release */ |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| if(iface && iface->roam_synch_in_progress) |
| WMA_LOGD("%s:statype %d vdevid %d aid %d bssid %pM staIdx %d status %d", |
| __func__, params->staType, params->smesessionId, |
| params->assocId, params->bssId, params->staIdx, status); |
| else |
| WMA_LOGE("%s:statype %d vdevid %d aid %d bssid %pM staIdx %d status %d", |
| __func__, params->staType, params->smesessionId, |
| params->assocId, params->bssId, params->staIdx, status); |
| #endif |
| wma_send_msg(wma, WDA_ADD_STA_RSP, (void *)params, 0); |
| } |
| |
| #ifdef FEATURE_WLAN_D0WOW |
| static void wma_add_pm_vote(tp_wma_handle wma) |
| { |
| if (++wma->ap_client_cnt == 1) { |
| vos_runtime_pm_prevent_suspend(wma->runtime_context.ap); |
| vos_pm_control(DISABLE_PCIE_POWER_COLLAPSE); |
| } |
| } |
| |
| static void wma_del_pm_vote(tp_wma_handle wma) |
| { |
| if (--wma->ap_client_cnt == 0) { |
| vos_runtime_pm_allow_suspend(wma->runtime_context.ap); |
| vos_pm_control(ENABLE_PCIE_POWER_COLLAPSE); |
| } |
| } |
| #else |
| static void wma_prevent_suspend_check(tp_wma_handle wma) |
| { |
| wma->ap_client_cnt++; |
| if (wma->ap_client_cnt == |
| wma->wlan_resource_config.num_offload_peers) { |
| vos_runtime_pm_prevent_suspend(wma->runtime_context.ap); |
| vos_wake_lock_acquire(&wma->wow_wake_lock, |
| WIFI_POWER_EVENT_WAKELOCK_ADD_STA); |
| WMA_LOGW("%s: %d clients connected, prevent suspend", |
| __func__, wma->ap_client_cnt); |
| } |
| } |
| |
| static void wma_allow_suspend_check(tp_wma_handle wma) |
| { |
| wma->ap_client_cnt--; |
| if (wma->ap_client_cnt == |
| wma->wlan_resource_config.num_offload_peers - 1) { |
| vos_wake_lock_release(&wma->wow_wake_lock, |
| WIFI_POWER_EVENT_WAKELOCK_DEL_STA); |
| vos_runtime_pm_allow_suspend(wma->runtime_context.ap); |
| WMA_LOGW("%s: %d clients connected, allow suspend", |
| __func__, wma->ap_client_cnt); |
| } |
| } |
| #endif /* FEATURE_WLAN_D0WOW */ |
| |
| int wma_get_client_count(WMA_HANDLE handle) |
| { |
| tp_wma_handle wma = (tp_wma_handle)handle; |
| return wma->ap_client_cnt; |
| } |
| |
| static void wma_add_sta(tp_wma_handle wma, tpAddStaParams add_sta) |
| { |
| tANI_U8 oper_mode = BSS_OPERATIONAL_MODE_STA; |
| |
| WMA_LOGD("%s: add_sta->sessionId = %d.", __func__, add_sta->smesessionId); |
| WMA_LOGD("%s: add_sta->bssId = %x:%x:%x:%x:%x:%x", __func__, |
| add_sta->bssId[0], add_sta->bssId[1], add_sta->bssId[2], |
| add_sta->bssId[3], add_sta->bssId[4], add_sta->bssId[5]); |
| |
| if (wma_is_vdev_in_ap_mode(wma, add_sta->smesessionId)) { |
| #ifdef FEATURE_WLAN_D0WOW |
| wma_add_pm_vote(wma); |
| #else |
| wma_prevent_suspend_check(wma); |
| #endif |
| oper_mode = BSS_OPERATIONAL_MODE_AP; |
| } |
| #ifdef QCA_IBSS_SUPPORT |
| else if (wma_is_vdev_in_ibss_mode(wma, add_sta->smesessionId)) { |
| oper_mode = BSS_OPERATIONAL_MODE_IBSS; |
| #ifdef FEATURE_WLAN_D0WOW |
| wma_add_pm_vote(wma); |
| #endif |
| } |
| #endif |
| if (WMA_IS_VDEV_IN_NDI_MODE(wma->interfaces, add_sta->smesessionId)) |
| oper_mode = BSS_OPERATIONAL_MODE_NDI; |
| switch (oper_mode) { |
| case BSS_OPERATIONAL_MODE_STA: |
| wma_add_sta_req_sta_mode(wma, add_sta); |
| break; |
| |
| #ifdef QCA_IBSS_SUPPORT |
| case BSS_OPERATIONAL_MODE_IBSS: /* IBSS should share the same code as AP mode */ |
| #endif |
| case BSS_OPERATIONAL_MODE_AP: |
| wma_add_sta_req_ap_mode(wma, add_sta); |
| break; |
| case BSS_OPERATIONAL_MODE_NDI: |
| wma_add_sta_ndi_mode(wma, add_sta); |
| break; |
| } |
| |
| #ifdef QCA_IBSS_SUPPORT |
| /* adjust heart beat thresold timer value for detecting ibss peer departure */ |
| if (oper_mode == BSS_OPERATIONAL_MODE_IBSS) |
| wma_adjust_ibss_heart_beat_timer(wma, add_sta->smesessionId, 1); |
| #endif |
| |
| } |
| |
| /* |
| * This function reads WEP keys from cfg and fills |
| * up key_info. |
| */ |
| static void wma_read_cfg_wepkey(tp_wma_handle wma_handle, |
| tSirKeys *key_info, v_U32_t *def_key_idx, |
| u_int8_t *num_keys) |
| { |
| tSirRetStatus status; |
| v_U32_t val = SIR_MAC_KEY_LENGTH; |
| u_int8_t i, j; |
| |
| WMA_LOGD("Reading WEP keys from cfg"); |
| /* NOTE:def_key_idx is initialized to 0 by the caller */ |
| status = wlan_cfgGetInt(wma_handle->mac_context, |
| WNI_CFG_WEP_DEFAULT_KEYID, def_key_idx); |
| if (status != eSIR_SUCCESS) |
| WMA_LOGE("Unable to read default id, defaulting to 0"); |
| |
| for (i = 0, j = 0; i < SIR_MAC_MAX_NUM_OF_DEFAULT_KEYS; i++) { |
| status = wlan_cfgGetStr(wma_handle->mac_context, |
| (u_int16_t) WNI_CFG_WEP_DEFAULT_KEY_1 + i, |
| key_info[j].key, &val); |
| if (status != eSIR_SUCCESS) { |
| WMA_LOGE("WEP key is not configured at :%d", i); |
| } else { |
| key_info[j].keyId = i; |
| key_info[j].keyLength = (u_int16_t) val; |
| j++; |
| } |
| } |
| *num_keys = j; |
| } |
| |
| /* |
| * This function setsup wmi buffer from information |
| * passed in key_params. |
| */ |
| static wmi_buf_t wma_setup_install_key_cmd(tp_wma_handle wma_handle, |
| struct wma_set_key_params *key_params, |
| u_int32_t *len, u_int8_t mode) |
| { |
| wmi_vdev_install_key_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| u_int8_t *key_data; |
| #ifdef WLAN_FEATURE_11W |
| struct wma_txrx_node *iface = NULL; |
| #endif /* WLAN_FEATURE_11W */ |
| if ((key_params->key_type == eSIR_ED_NONE && |
| key_params->key_len) || (key_params->key_type != eSIR_ED_NONE && |
| !key_params->key_len)) { |
| WMA_LOGE("%s:Invalid set key request", __func__); |
| return NULL; |
| } |
| |
| *len = sizeof(*cmd) + roundup(key_params->key_len, sizeof(u_int32_t)) + |
| WMI_TLV_HDR_SIZE; |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, *len); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate buffer to send set key cmd"); |
| return NULL; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_vdev_install_key_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_install_key_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vdev_install_key_cmd_fixed_param)); |
| cmd->vdev_id = key_params->vdev_id; |
| cmd->key_ix = key_params->key_idx; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(key_params->peer_mac, |
| &cmd->peer_macaddr); |
| vos_mem_copy(&cmd->key_rsc_counter, |
| &key_params->key_rsc[0], sizeof(uint64_t)); |
| if (key_params->unicast) |
| cmd->key_flags |= PAIRWISE_USAGE; |
| else |
| cmd->key_flags |= GROUP_USAGE; |
| |
| switch (key_params->key_type) { |
| case eSIR_ED_NONE: |
| cmd->key_cipher = WMI_CIPHER_NONE; |
| break; |
| case eSIR_ED_WEP40: |
| case eSIR_ED_WEP104: |
| cmd->key_cipher = WMI_CIPHER_WEP; |
| if (key_params->unicast && |
| cmd->key_ix == key_params->def_key_idx) { |
| WMA_LOGD("STA Mode: cmd->key_flags |= TX_USAGE"); |
| cmd->key_flags |= TX_USAGE; |
| } else if ((mode == wlan_op_mode_ap) && |
| (cmd->key_ix == key_params->def_key_idx)) { |
| WMA_LOGD("AP Mode: cmd->key_flags |= TX_USAGE"); |
| cmd->key_flags |= TX_USAGE; |
| } |
| break; |
| case eSIR_ED_TKIP: |
| cmd->key_txmic_len = WMA_TXMIC_LEN; |
| cmd->key_rxmic_len = WMA_RXMIC_LEN; |
| cmd->key_cipher = WMI_CIPHER_TKIP; |
| break; |
| #ifdef FEATURE_WLAN_WAPI |
| #define WPI_IV_LEN 16 |
| case eSIR_ED_WPI: |
| { |
| /*initialize receive and transmit IV with default values*/ |
| /* **Note: tx_iv must be sent in reverse** */ |
| unsigned char tx_iv[16] = {0x36,0x5c,0x36,0x5c,0x36,0x5c,0x36, |
| 0x5c,0x36,0x5c,0x36,0x5c,0x36,0x5c, |
| 0x36,0x5c}; |
| unsigned char rx_iv[16] = {0x5c,0x36,0x5c,0x36,0x5c,0x36,0x5c, |
| 0x36,0x5c,0x36,0x5c,0x36,0x5c,0x36, |
| 0x5c,0x37}; |
| if (mode == wlan_op_mode_ap) { |
| /*Authenticator initializes the value of PN as |
| *0x5C365C365C365C365C365C365C365C36 for MCastkey Update |
| */ |
| if (key_params->unicast) |
| tx_iv[0] = 0x37; |
| |
| rx_iv[WPI_IV_LEN - 1] = 0x36; |
| } else { |
| if (!key_params->unicast) |
| rx_iv[WPI_IV_LEN - 1] = 0x36; |
| } |
| |
| cmd->key_txmic_len = WMA_TXMIC_LEN; |
| cmd->key_rxmic_len = WMA_RXMIC_LEN; |
| |
| vos_mem_copy(&cmd->wpi_key_rsc_counter, &rx_iv, WPI_IV_LEN); |
| vos_mem_copy(&cmd->wpi_key_tsc_counter, &tx_iv, WPI_IV_LEN); |
| cmd->key_cipher = WMI_CIPHER_WAPI; |
| break; |
| } |
| #endif |
| case eSIR_ED_CCMP: |
| cmd->key_cipher = WMI_CIPHER_AES_CCM; |
| break; |
| #ifdef WLAN_FEATURE_11W |
| case eSIR_ED_AES_128_CMAC: |
| cmd->key_cipher = WMI_CIPHER_AES_CMAC; |
| break; |
| #endif /* WLAN_FEATURE_11W */ |
| default: |
| /* TODO: MFP ? */ |
| WMA_LOGE("%s:Invalid encryption type:%d", __func__, key_params->key_type); |
| wmi_buf_free(buf); |
| return NULL; |
| } |
| |
| buf_ptr += sizeof(wmi_vdev_install_key_cmd_fixed_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, |
| roundup(key_params->key_len, sizeof(u_int32_t))); |
| key_data = (A_UINT8*)(buf_ptr + WMI_TLV_HDR_SIZE); |
| #ifdef BIG_ENDIAN_HOST |
| { |
| /* for big endian host, copy engine byte_swap is enabled |
| * But the key data content is in network byte order |
| * Need to byte swap the key data content - so when copy engine |
| * does byte_swap - target gets key_data content in the correct |
| * order. |
| */ |
| int8_t i; |
| u_int32_t *destp, *srcp; |
| |
| destp = (u_int32_t *) key_data; |
| srcp = (u_int32_t *) key_params->key_data; |
| for(i = 0; |
| i < roundup(key_params->key_len, sizeof(u_int32_t)) / 4; |
| i++) { |
| *destp = le32_to_cpu(*srcp); |
| destp++; |
| srcp++; |
| } |
| } |
| #else |
| vos_mem_copy((void *) key_data, |
| (const void *) key_params->key_data, |
| key_params->key_len); |
| #endif |
| cmd->key_len = key_params->key_len; |
| |
| #ifdef WLAN_FEATURE_11W |
| if (key_params->key_type == eSIR_ED_AES_128_CMAC) |
| { |
| iface = &wma_handle->interfaces[key_params->vdev_id]; |
| if (iface) { |
| iface->key.key_length = key_params->key_len; |
| vos_mem_copy (iface->key.key, |
| (const void *) key_params->key_data, |
| iface->key.key_length); |
| if ((cmd->key_ix == WMA_IGTK_KEY_INDEX_4) || |
| (cmd->key_ix == WMA_IGTK_KEY_INDEX_5)) |
| vos_mem_zero (iface->key.key_id[cmd->key_ix - WMA_IGTK_KEY_INDEX_4].ipn, |
| CMAC_IPN_LEN); |
| } |
| } |
| #endif /* WLAN_FEATURE_11W */ |
| |
| WMA_LOGD("Key setup : vdev_id %d key_idx %d key_type %d key_len %d" |
| " unicast %d peer_mac %pM def_key_idx %d", key_params->vdev_id, |
| key_params->key_idx, key_params->key_type, key_params->key_len, |
| key_params->unicast, key_params->peer_mac, |
| key_params->def_key_idx); |
| WMA_LOGD("keyrsc param key_seq_counter_h:0x%x key_seq_counter_l: 0x%x", |
| cmd->key_rsc_counter.key_seq_counter_h, |
| cmd->key_rsc_counter.key_seq_counter_l); |
| |
| return buf; |
| } |
| |
| static void wma_set_bsskey(tp_wma_handle wma_handle, tpSetBssKeyParams key_info) |
| { |
| struct wma_set_key_params key_params; |
| wmi_buf_t buf; |
| int32_t status; |
| u_int32_t len = 0, i; |
| v_U32_t def_key_idx = 0; |
| ol_txrx_vdev_handle txrx_vdev; |
| |
| WMA_LOGD("BSS key setup"); |
| txrx_vdev = wma_find_vdev_by_id(wma_handle, key_info->smesessionId); |
| if (!txrx_vdev) { |
| WMA_LOGE("%s:Invalid vdev handle", __func__); |
| key_info->status = eHAL_STATUS_FAILURE; |
| goto out; |
| } |
| |
| /* |
| ** For IBSS, WMI expects the BSS key to be set per peer key |
| ** So cache the BSS key in the wma_handle and re-use it when the STA key is been setup for a peer |
| */ |
| if (wlan_op_mode_ibss == txrx_vdev->opmode) { |
| key_info->status = eHAL_STATUS_SUCCESS; |
| if (wma_handle->ibss_started > 0) |
| goto out; |
| WMA_LOGD("Caching IBSS Key"); |
| vos_mem_copy(&wma_handle->ibsskey_info, key_info, sizeof(tSetBssKeyParams)); |
| } |
| |
| adf_os_mem_set(&key_params, 0, sizeof(key_params)); |
| key_params.vdev_id = key_info->smesessionId; |
| key_params.key_type = key_info->encType; |
| key_params.singl_tid_rc = key_info->singleTidRc; |
| key_params.unicast = FALSE; |
| if (txrx_vdev->opmode == wlan_op_mode_sta) { |
| vos_mem_copy(key_params.peer_mac, |
| wma_handle->interfaces[key_info->smesessionId].bssid, |
| ETH_ALEN); |
| } else { |
| /* vdev mac address will be passed for all other modes */ |
| vos_mem_copy(key_params.peer_mac, txrx_vdev->mac_addr.raw, |
| ETH_ALEN); |
| WMA_LOGA("BSS Key setup with vdev_mac %pM\n", |
| txrx_vdev->mac_addr.raw); |
| } |
| |
| if (key_info->numKeys == 0 && |
| (key_info->encType == eSIR_ED_WEP40 || |
| key_info->encType == eSIR_ED_WEP104)) { |
| wma_read_cfg_wepkey(wma_handle, key_info->key, |
| &def_key_idx, &key_info->numKeys); |
| } else if ((key_info->encType == eSIR_ED_WEP40) || |
| (key_info->encType == eSIR_ED_WEP104)) { |
| struct wma_txrx_node *intf = |
| &wma_handle->interfaces[key_info->smesessionId]; |
| key_params.def_key_idx = intf->wep_default_key_idx; |
| } |
| |
| for (i = 0; i < key_info->numKeys; i++) { |
| if (key_params.key_type != eSIR_ED_NONE && |
| !key_info->key[i].keyLength) |
| continue; |
| if (key_info->encType == eSIR_ED_WPI) { |
| key_params.key_idx = key_info->key[i].keyId; |
| key_params.def_key_idx = key_info->key[i].keyId; |
| } else |
| key_params.key_idx = key_info->key[i].keyId; |
| |
| key_params.key_len = key_info->key[i].keyLength; |
| vos_mem_copy(key_params.key_rsc, |
| key_info->key[i].keyRsc, |
| SIR_MAC_MAX_KEY_RSC_LEN); |
| |
| if (key_info->encType == eSIR_ED_TKIP) { |
| vos_mem_copy(key_params.key_data, |
| key_info->key[i].key, 16); |
| vos_mem_copy(&key_params.key_data[16], |
| &key_info->key[i].key[24], 8); |
| vos_mem_copy(&key_params.key_data[24], |
| &key_info->key[i].key[16], 8); |
| } else |
| vos_mem_copy((v_VOID_t *) key_params.key_data, |
| (const v_VOID_t *) key_info->key[i].key, |
| key_info->key[i].keyLength); |
| |
| WMA_LOGD("%s: bss key[%d] length %d", __func__, i, |
| key_info->key[i].keyLength); |
| |
| buf = wma_setup_install_key_cmd(wma_handle, &key_params, &len, |
| txrx_vdev->opmode); |
| if (!buf) { |
| WMA_LOGE("%s:Failed to setup install key buf", __func__); |
| key_info->status = eHAL_STATUS_FAILED_ALLOC; |
| goto out; |
| } |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_VDEV_INSTALL_KEY_CMDID); |
| if (status) { |
| wmi_buf_free(buf); |
| WMA_LOGE("%s:Failed to send install key command", __func__); |
| key_info->status = eHAL_STATUS_FAILURE; |
| goto out; |
| } |
| } |
| |
| wma_handle->ibss_started++; |
| /* TODO: Should we wait till we get HTT_T2H_MSG_TYPE_SEC_IND? */ |
| key_info->status = eHAL_STATUS_SUCCESS; |
| |
| out: |
| wma_send_msg(wma_handle, WDA_SET_BSSKEY_RSP, (void *)key_info, 0); |
| } |
| |
| static void wma_set_ibsskey_helper(tp_wma_handle wma_handle, tpSetBssKeyParams key_info, u_int8_t* peerMacAddr) |
| { |
| struct wma_set_key_params key_params; |
| wmi_buf_t buf; |
| int32_t status; |
| u_int32_t len = 0, i; |
| v_U32_t def_key_idx = 0; |
| ol_txrx_vdev_handle txrx_vdev; |
| |
| WMA_LOGD("BSS key setup for peer"); |
| ASSERT( NULL != peerMacAddr); |
| txrx_vdev = wma_find_vdev_by_id(wma_handle, key_info->smesessionId); |
| if (!txrx_vdev) { |
| WMA_LOGE("%s:Invalid vdev handle", __func__); |
| key_info->status = eHAL_STATUS_FAILURE; |
| return; |
| } |
| |
| adf_os_mem_set(&key_params, 0, sizeof(key_params)); |
| key_params.vdev_id = key_info->smesessionId; |
| key_params.key_type = key_info->encType; |
| key_params.singl_tid_rc = key_info->singleTidRc; |
| key_params.unicast = FALSE; |
| ASSERT(wlan_op_mode_ibss == txrx_vdev->opmode); |
| |
| vos_mem_copy(key_params.peer_mac, peerMacAddr, ETH_ALEN); |
| |
| if (key_info->numKeys == 0 && |
| (key_info->encType == eSIR_ED_WEP40 || |
| key_info->encType == eSIR_ED_WEP104)) { |
| wma_read_cfg_wepkey(wma_handle, key_info->key, |
| &def_key_idx, &key_info->numKeys); |
| } |
| |
| for (i = 0; i < key_info->numKeys; i++) { |
| if (key_params.key_type != eSIR_ED_NONE && |
| !key_info->key[i].keyLength) |
| continue; |
| key_params.key_idx = key_info->key[i].keyId; |
| key_params.key_len = key_info->key[i].keyLength; |
| if (key_info->encType == eSIR_ED_TKIP) { |
| vos_mem_copy(key_params.key_data, |
| key_info->key[i].key, 16); |
| vos_mem_copy(&key_params.key_data[16], |
| &key_info->key[i].key[24], 8); |
| vos_mem_copy(&key_params.key_data[24], |
| &key_info->key[i].key[16], 8); |
| } else |
| vos_mem_copy((v_VOID_t *) key_params.key_data, |
| (const v_VOID_t *) key_info->key[i].key, |
| key_info->key[i].keyLength); |
| |
| WMA_LOGD("%s: peer bcast key[%d] length %d", __func__, i, |
| key_info->key[i].keyLength); |
| |
| buf = wma_setup_install_key_cmd(wma_handle, &key_params, &len, |
| txrx_vdev->opmode); |
| if (!buf) { |
| WMA_LOGE("%s:Failed to setup install key buf", __func__); |
| return; |
| } |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_VDEV_INSTALL_KEY_CMDID); |
| if (status) { |
| wmi_buf_free(buf); |
| WMA_LOGE("%s:Failed to send install key command", __func__); |
| } |
| } |
| } |
| |
| static void wma_set_stakey(tp_wma_handle wma_handle, tpSetStaKeyParams key_info) |
| { |
| wmi_buf_t buf; |
| int32_t status, i; |
| u_int32_t len = 0; |
| ol_txrx_pdev_handle txrx_pdev; |
| ol_txrx_vdev_handle txrx_vdev; |
| struct ol_txrx_peer_t *peer; |
| u_int8_t num_keys = 0, peer_id; |
| struct wma_set_key_params key_params; |
| v_U32_t def_key_idx = 0; |
| |
| WMA_LOGD("STA key setup"); |
| |
| /* Get the txRx Pdev handle */ |
| txrx_pdev = vos_get_context(VOS_MODULE_ID_TXRX, |
| wma_handle->vos_context); |
| if (!txrx_pdev) { |
| WMA_LOGE("%s:Invalid txrx pdev handle", __func__); |
| key_info->status = eHAL_STATUS_FAILURE; |
| goto out; |
| } |
| |
| peer = ol_txrx_find_peer_by_addr(txrx_pdev, key_info->peerMacAddr, |
| &peer_id); |
| if (!peer) { |
| WMA_LOGE("%s:Invalid peer for key setting", __func__); |
| key_info->status = eHAL_STATUS_FAILURE; |
| goto out; |
| } |
| |
| txrx_vdev = wma_find_vdev_by_id(wma_handle, key_info->smesessionId); |
| if(!txrx_vdev) { |
| WMA_LOGE("%s:TxRx Vdev Handle is NULL", __func__); |
| key_info->status = eHAL_STATUS_FAILURE; |
| goto out; |
| } |
| |
| if (key_info->defWEPIdx == WMA_INVALID_KEY_IDX && |
| (key_info->encType == eSIR_ED_WEP40 || |
| key_info->encType == eSIR_ED_WEP104) && |
| txrx_vdev->opmode != wlan_op_mode_ap) { |
| wma_read_cfg_wepkey(wma_handle, key_info->key, |
| &def_key_idx, &num_keys); |
| key_info->defWEPIdx = def_key_idx; |
| } else { |
| num_keys = SIR_MAC_MAX_NUM_OF_DEFAULT_KEYS; |
| if (key_info->encType != eSIR_ED_NONE) { |
| for (i = 0; i < num_keys; i++) { |
| if (key_info->key[i].keyDirection == |
| eSIR_TX_DEFAULT) { |
| key_info->defWEPIdx = i; |
| break; |
| } |
| } |
| } |
| } |
| adf_os_mem_set(&key_params, 0, sizeof(key_params)); |
| key_params.vdev_id = key_info->smesessionId; |
| key_params.key_type = key_info->encType; |
| key_params.singl_tid_rc = key_info->singleTidRc; |
| key_params.unicast = TRUE; |
| key_params.def_key_idx = key_info->defWEPIdx; |
| vos_mem_copy((v_VOID_t *) key_params.peer_mac, |
| (const v_VOID_t *) key_info->peerMacAddr, ETH_ALEN); |
| for (i = 0; i < num_keys; i++) { |
| if (key_params.key_type != eSIR_ED_NONE && |
| !key_info->key[i].keyLength) |
| continue; |
| if (key_info->encType == eSIR_ED_TKIP) { |
| vos_mem_copy(key_params.key_data, |
| key_info->key[i].key, 16); |
| vos_mem_copy(&key_params.key_data[16], |
| &key_info->key[i].key[24], 8); |
| vos_mem_copy(&key_params.key_data[24], |
| &key_info->key[i].key[16], 8); |
| } else |
| vos_mem_copy(key_params.key_data, key_info->key[i].key, |
| key_info->key[i].keyLength); |
| if (key_info->encType == eSIR_ED_WPI) { |
| key_params.key_idx = key_info->key[i].keyId; |
| key_params.def_key_idx = key_info->key[i].keyId; |
| } else |
| key_params.key_idx = i; |
| |
| key_params.key_len = key_info->key[i].keyLength; |
| buf = wma_setup_install_key_cmd(wma_handle, &key_params, &len, |
| txrx_vdev->opmode); |
| if (!buf) { |
| WMA_LOGE("%s:Failed to setup install key buf", __func__); |
| key_info->status = eHAL_STATUS_FAILED_ALLOC; |
| goto out; |
| } |
| |
| WMA_LOGD("%s: peer unicast key[%d] %d ", __func__, i, |
| key_info->key[i].keyLength); |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_VDEV_INSTALL_KEY_CMDID); |
| if (status) { |
| wmi_buf_free(buf); |
| WMA_LOGE("%s:Failed to send install key command", __func__); |
| key_info->status = eHAL_STATUS_FAILURE; |
| goto out; |
| } |
| } |
| |
| /* In IBSS mode, set the BSS KEY for this peer |
| ** BSS key is supposed to be cache into wma_handle |
| */ |
| if (wlan_op_mode_ibss == txrx_vdev->opmode){ |
| wma_set_ibsskey_helper(wma_handle, &wma_handle->ibsskey_info, key_info->peerMacAddr); |
| } |
| |
| /* TODO: Should we wait till we get HTT_T2H_MSG_TYPE_SEC_IND? */ |
| key_info->status = eHAL_STATUS_SUCCESS; |
| out: |
| if (key_info->sendRsp) |
| wma_send_msg(wma_handle, WDA_SET_STAKEY_RSP, (void *) key_info, 0); |
| } |
| |
| static void wma_delete_sta_req_ap_mode(tp_wma_handle wma, |
| tpDeleteStaParams del_sta) |
| { |
| ol_txrx_pdev_handle pdev; |
| struct ol_txrx_peer_t *peer; |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to get pdev", __func__); |
| del_sta->status = VOS_STATUS_E_FAILURE; |
| goto send_del_rsp; |
| } |
| |
| peer = ol_txrx_peer_find_by_local_id(pdev, del_sta->staIdx); |
| if (!peer) { |
| WMA_LOGE("%s: Failed to get peer handle using peer id %d", |
| __func__, del_sta->staIdx); |
| del_sta->status = VOS_STATUS_E_FAILURE; |
| goto send_del_rsp; |
| } |
| |
| wma_remove_peer(wma, peer->mac_addr.raw, del_sta->smesessionId, peer, |
| VOS_FALSE); |
| del_sta->status = VOS_STATUS_SUCCESS; |
| |
| send_del_rsp: |
| if (del_sta->respReqd) { |
| WMA_LOGD("%s: Sending del rsp to umac (status: %d)", |
| __func__, del_sta->status); |
| wma_send_msg(wma, WDA_DELETE_STA_RSP, (void *)del_sta, 0); |
| } |
| } |
| |
| #ifdef FEATURE_WLAN_TDLS |
| static void wma_del_tdls_sta(tp_wma_handle wma, |
| tpDeleteStaParams del_sta) |
| { |
| ol_txrx_pdev_handle pdev; |
| ol_txrx_vdev_handle vdev; |
| struct ol_txrx_peer_t *peer; |
| tTdlsPeerStateParams *peerStateParams; |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to find pdev", __func__); |
| del_sta->status = VOS_STATUS_E_FAILURE; |
| goto send_del_rsp; |
| } |
| |
| vdev = wma_find_vdev_by_id(wma, del_sta->smesessionId); |
| if (!vdev) { |
| WMA_LOGE("%s: Failed to find vdev", __func__); |
| del_sta->status = VOS_STATUS_E_FAILURE; |
| goto send_del_rsp; |
| } |
| |
| peer = ol_txrx_peer_find_by_local_id(pdev, del_sta->staIdx); |
| if (!peer) { |
| WMA_LOGE("%s: Failed to get peer handle using peer id %d", |
| __func__, del_sta->staIdx); |
| del_sta->status = VOS_STATUS_E_FAILURE; |
| goto send_del_rsp; |
| } |
| |
| peerStateParams = vos_mem_malloc(sizeof(tTdlsPeerStateParams)); |
| if (!peerStateParams) { |
| WMA_LOGE("%s: Failed to allocate memory for peerStateParams for: %pM", |
| __func__, del_sta->staMac); |
| del_sta->status = VOS_STATUS_E_FAILURE; |
| goto send_del_rsp; |
| } |
| |
| vos_mem_zero(peerStateParams, sizeof(*peerStateParams)); |
| peerStateParams->peerState = WDA_TDLS_PEER_STATE_TEARDOWN; |
| peerStateParams->vdevId = vdev->vdev_id; |
| vos_mem_copy(&peerStateParams->peerMacAddr, |
| &del_sta->staMac, |
| sizeof(tSirMacAddr)); |
| |
| WMA_LOGD("%s: sending tdls_peer_state for peer mac: %pM, " |
| " peerState: %d", |
| __func__, peerStateParams->peerMacAddr, |
| peerStateParams->peerState); |
| |
| wma_update_tdls_peer_state(wma, peerStateParams); |
| |
| del_sta->status = VOS_STATUS_SUCCESS; |
| |
| send_del_rsp: |
| if (del_sta->respReqd) { |
| WMA_LOGD("%s: Sending del rsp to umac (status: %d)", |
| __func__, del_sta->status); |
| wma_send_msg(wma, WDA_DELETE_STA_RSP, (void *)del_sta, 0); |
| } |
| } |
| #endif |
| |
| static void wma_delete_sta_req_sta_mode(tp_wma_handle wma, |
| tpDeleteStaParams params) |
| { |
| VOS_STATUS status = VOS_STATUS_SUCCESS; |
| struct wma_txrx_node *iface; |
| iface = &wma->interfaces[params->smesessionId]; |
| iface->uapsd_cached_val = 0; |
| |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| /* In case of LFR3.0 we need not send any |
| * WMI commands to FW before SYNCH_CONFIRM */ |
| if(iface->roam_synch_in_progress) |
| goto send_del_sta_rsp; |
| #endif |
| #ifdef FEATURE_WLAN_TDLS |
| if (STA_ENTRY_TDLS_PEER == params->staType) |
| { |
| wma_del_tdls_sta(wma, params); |
| return; |
| } |
| #endif |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| send_del_sta_rsp: |
| #endif |
| params->status = status; |
| if (params->respReqd) { |
| WMA_LOGD("%s: vdev_id %d status %d", __func__, |
| params->smesessionId, status); |
| wma_send_msg(wma, WDA_DELETE_STA_RSP, (void *)params, 0); |
| } |
| } |
| |
| static void wma_delete_sta(tp_wma_handle wma, tpDeleteStaParams del_sta) |
| { |
| tANI_U8 oper_mode = BSS_OPERATIONAL_MODE_STA; |
| u_int8_t smesession_id = del_sta->smesessionId; |
| bool rsp_requested = del_sta->respReqd; |
| |
| if (wma_is_vdev_in_ap_mode(wma, smesession_id)) { |
| #ifdef FEATURE_WLAN_D0WOW |
| wma_del_pm_vote(wma); |
| #else |
| wma_allow_suspend_check(wma); |
| #endif |
| oper_mode = BSS_OPERATIONAL_MODE_AP; |
| } |
| #ifdef QCA_IBSS_SUPPORT |
| if (wma_is_vdev_in_ibss_mode(wma, smesession_id)) { |
| oper_mode = BSS_OPERATIONAL_MODE_IBSS; |
| #ifdef FEATURE_WLAN_D0WOW |
| wma_del_pm_vote(wma); |
| #endif |
| WMA_LOGD("%s: to delete sta for IBSS mode", __func__); |
| } |
| #endif |
| if (del_sta->staType == STA_ENTRY_NDI_PEER) |
| oper_mode = BSS_OPERATIONAL_MODE_NDI; |
| |
| switch (oper_mode) { |
| case BSS_OPERATIONAL_MODE_STA: |
| wma_delete_sta_req_sta_mode(wma, del_sta); |
| break; |
| |
| #ifdef QCA_IBSS_SUPPORT |
| case BSS_OPERATIONAL_MODE_IBSS: /* IBSS shares AP code */ |
| #endif |
| case BSS_OPERATIONAL_MODE_AP: |
| wma_delete_sta_req_ap_mode(wma, del_sta); |
| break; |
| case BSS_OPERATIONAL_MODE_NDI: |
| wma_delete_sta_req_ndi_mode(wma, del_sta); |
| break; |
| } |
| |
| #ifdef QCA_IBSS_SUPPORT |
| /* adjust heart beat thresold timer value for |
| * detecting ibss peer departure |
| */ |
| if (oper_mode == BSS_OPERATIONAL_MODE_IBSS) |
| wma_adjust_ibss_heart_beat_timer(wma, smesession_id, -1); |
| #endif |
| if (!rsp_requested) { |
| WMA_LOGD("%s: vdev_id %d status %d", __func__, |
| del_sta->smesessionId, del_sta->status); |
| vos_mem_free(del_sta); |
| } |
| } |
| |
| static int32_t wmi_unified_vdev_stop_send(wmi_unified_t wmi, u_int8_t vdev_id) |
| { |
| wmi_vdev_stop_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wmi, len); |
| if (!buf) { |
| WMA_LOGP("%s : wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| cmd = (wmi_vdev_stop_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_stop_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_vdev_stop_cmd_fixed_param)); |
| cmd->vdev_id = vdev_id; |
| if (wmi_unified_cmd_send(wmi, buf, len, WMI_VDEV_STOP_CMDID)) { |
| WMA_LOGP("%s: Failed to send vdev stop command", __func__); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static void wma_delete_bss(tp_wma_handle wma, tpDeleteBssParams params) |
| { |
| ol_txrx_pdev_handle pdev; |
| ol_txrx_peer_handle peer = NULL; |
| struct wma_target_req *msg; |
| VOS_STATUS status = VOS_STATUS_SUCCESS; |
| u_int8_t peer_id; |
| u_int8_t max_wait_iterations = 0; |
| ol_txrx_vdev_handle txrx_vdev = NULL; |
| v_BOOL_t roam_synch_in_progress = VOS_FALSE; |
| u_int32_t timeout = WMA_VDEV_STOP_REQUEST_TIMEOUT; |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s:Unable to get TXRX context", __func__); |
| goto out; |
| } |
| |
| #ifdef QCA_IBSS_SUPPORT |
| if (wma_is_vdev_in_ibss_mode(wma, params->smesessionId)) |
| /* in rome ibss case, self mac is used to create the bss peer */ |
| peer = ol_txrx_find_peer_by_addr(pdev, |
| wma->interfaces[params->smesessionId].addr, |
| &peer_id); |
| else |
| #endif |
| if (WMA_IS_VDEV_IN_NDI_MODE(wma->interfaces, |
| params->smesessionId)) |
| /* In ndi case, self mac is used to create the self peer */ |
| peer = ol_txrx_find_peer_by_addr(pdev, |
| wma->interfaces[params->smesessionId].addr, |
| &peer_id); |
| else |
| peer = ol_txrx_find_peer_by_addr(pdev, params->bssid, |
| &peer_id); |
| |
| if (!peer) { |
| WMA_LOGP("%s: Failed to find peer %pM", __func__, |
| params->bssid); |
| status = VOS_STATUS_E_FAILURE; |
| goto out; |
| } |
| |
| vos_mem_zero(wma->interfaces[params->smesessionId].bssid, ETH_ALEN); |
| |
| txrx_vdev = wma_find_vdev_by_id(wma, params->smesessionId); |
| if (!txrx_vdev) { |
| WMA_LOGE("%s:Invalid vdev handle", __func__); |
| status = VOS_STATUS_E_FAILURE; |
| goto out; |
| } |
| |
| /*Free the allocated stats response buffer for the the session*/ |
| if (wma->interfaces[params->smesessionId].stats_rsp) { |
| vos_mem_free(wma->interfaces[params->smesessionId].stats_rsp); |
| wma->interfaces[params->smesessionId].stats_rsp = NULL; |
| } |
| |
| if (wma->interfaces[params->smesessionId].psnr_req) { |
| vos_mem_free(wma->interfaces[params->smesessionId].psnr_req); |
| wma->interfaces[params->smesessionId].psnr_req = NULL; |
| } |
| |
| if (wma->interfaces[params->smesessionId].action_frame_filter) { |
| struct action_frame_random_filter *action_frame_filter = |
| wma->interfaces[params->smesessionId].action_frame_filter; |
| wma->interfaces[params->smesessionId].action_frame_filter = |
| NULL; |
| vos_mem_free(action_frame_filter); |
| } |
| |
| if (wlan_op_mode_ibss == txrx_vdev->opmode) { |
| wma->ibss_started = 0; |
| } |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| if(wma->interfaces[params->smesessionId].roam_synch_in_progress) |
| { |
| roam_synch_in_progress = VOS_TRUE; |
| goto detach_peer; |
| } |
| #endif |
| /* overwrite the timeout value to shorten the SSR latency in HL |
| * solution |
| */ |
| if (vos_is_logp_in_progress(VOS_MODULE_ID_VOSS, NULL)) { |
| WMA_LOGP("%s: %d HL ssr in progress", |
| __func__, __LINE__); |
| timeout = WMA_DEL_BSS_TIMEOUT_IN_SSR; |
| } |
| |
| msg = wma_fill_vdev_req(wma, params->smesessionId, WDA_DELETE_BSS_REQ, |
| WMA_TARGET_REQ_TYPE_VDEV_STOP, params, |
| timeout); |
| if (!msg) { |
| WMA_LOGP("%s: Failed to fill vdev request for vdev_id %d", |
| __func__, params->smesessionId); |
| status = VOS_STATUS_E_NOMEM; |
| goto detach_peer; |
| } |
| |
| WMA_LOGW(FL("Outstanding msdu packets: %d"), |
| ol_txrx_get_tx_pending(pdev)); |
| |
| max_wait_iterations = |
| wma->interfaces[params->smesessionId].delay_before_vdev_stop / |
| WMA_TX_Q_RECHECK_TIMER_WAIT; |
| |
| while ( ol_txrx_get_tx_pending(pdev) && max_wait_iterations ) |
| { |
| WMA_LOGW(FL("Waiting for outstanding packet to drain.")); |
| vos_wait_single_event(&wma->tx_queue_empty_event, |
| WMA_TX_Q_RECHECK_TIMER_WAIT); |
| max_wait_iterations--; |
| } |
| |
| if (ol_txrx_get_tx_pending(pdev)) |
| { |
| WMA_LOGW(FL("Outstanding msdu packets before VDEV_STOP : %d"), |
| ol_txrx_get_tx_pending(pdev)); |
| } |
| |
| WMA_LOGD("%s, vdev_id: %d, pausing tx_ll_queue for VDEV_STOP (del_bss)", |
| __func__, params->smesessionId); |
| wdi_in_vdev_pause(wma->interfaces[params->smesessionId].handle, |
| OL_TXQ_PAUSE_REASON_VDEV_STOP); |
| wma->interfaces[params->smesessionId].pause_bitmap |= |
| (1 << PAUSE_TYPE_HOST); |
| |
| if (wmi_unified_vdev_stop_send(wma->wmi_handle, params->smesessionId)) { |
| WMA_LOGP("%s: %d Failed to send vdev stop", |
| __func__, __LINE__); |
| wma_remove_vdev_req(wma, params->smesessionId, |
| WMA_TARGET_REQ_TYPE_VDEV_STOP); |
| status = VOS_STATUS_E_FAILURE; |
| goto detach_peer; |
| } |
| WMA_LOGD("%s: bssid %pM vdev_id %d", |
| __func__, params->bssid, params->smesessionId); |
| return; |
| detach_peer: |
| wma_remove_peer(wma, params->bssid, params->smesessionId, peer, |
| roam_synch_in_progress); |
| out: |
| params->status = status; |
| wma_send_msg(wma, WDA_DELETE_BSS_RSP, (void *)params, 0); |
| } |
| |
| static void wma_set_linkstate(tp_wma_handle wma, tpLinkStateParams params) |
| { |
| ol_txrx_pdev_handle pdev; |
| ol_txrx_vdev_handle vdev; |
| ol_txrx_peer_handle peer; |
| u_int8_t vdev_id, peer_id; |
| v_BOOL_t roam_synch_in_progress = VOS_FALSE; |
| VOS_STATUS status; |
| |
| params->status = VOS_TRUE; |
| WMA_LOGD("%s: state %d selfmac %pM", __func__, |
| params->state, params->selfMacAddr); |
| if ((params->state != eSIR_LINK_PREASSOC_STATE) && |
| (params->state != eSIR_LINK_DOWN_STATE)) { |
| WMA_LOGD("%s: unsupported link state %d", |
| __func__, params->state); |
| goto out; |
| } |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Unable to get TXRX context", __func__); |
| goto out; |
| } |
| |
| vdev = wma_find_vdev_by_addr(wma, params->selfMacAddr, &vdev_id); |
| if (!vdev) { |
| WMA_LOGP("%s: vdev not found for addr: %pM", |
| __func__, params->selfMacAddr); |
| goto out; |
| } |
| |
| if (wma_is_vdev_in_ap_mode(wma, vdev_id)) { |
| WMA_LOGD("%s: Ignoring set link req in ap mode", __func__); |
| goto out; |
| } |
| |
| if (params->state == eSIR_LINK_PREASSOC_STATE) { |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| if(wma->interfaces[vdev_id].roam_synch_in_progress){ |
| roam_synch_in_progress = VOS_TRUE; |
| } |
| #endif |
| status = wma_create_peer(wma, pdev, vdev, params->bssid, |
| WMI_PEER_TYPE_DEFAULT, vdev_id, |
| roam_synch_in_progress); |
| if (status != VOS_STATUS_SUCCESS) |
| params->status = VOS_FALSE; |
| } |
| else { |
| WMA_LOGD("%s, vdev_id: %d, pausing tx_ll_queue for VDEV_STOP", |
| __func__, vdev_id); |
| wdi_in_vdev_pause(wma->interfaces[vdev_id].handle, |
| OL_TXQ_PAUSE_REASON_VDEV_STOP); |
| wma->interfaces[vdev_id].pause_bitmap |= (1 << PAUSE_TYPE_HOST); |
| if (wmi_unified_vdev_stop_send(wma->wmi_handle, vdev_id)) { |
| WMA_LOGP("%s: %d Failed to send vdev stop", |
| __func__, __LINE__); |
| } |
| peer = ol_txrx_find_peer_by_addr(pdev, params->bssid, &peer_id); |
| if (peer) { |
| WMA_LOGP("%s: Deleting peer %pM vdev id %d", |
| __func__, params->bssid, vdev_id); |
| wma_remove_peer(wma, params->bssid, vdev_id, peer, |
| roam_synch_in_progress); |
| } |
| } |
| out: |
| wma_send_msg(wma, WDA_SET_LINK_STATE_RSP, (void *)params, 0); |
| } |
| |
| /* |
| * Function to update per ac EDCA parameters |
| */ |
| static void wma_update_edca_params_for_ac(tSirMacEdcaParamRecord *edca_param, |
| wmi_wmm_vparams *wmm_param, |
| int ac) |
| { |
| #define WMA_WMM_EXPO_TO_VAL(val) ((1 << (val)) - 1) |
| wmm_param->cwmin = WMA_WMM_EXPO_TO_VAL(edca_param->cw.min); |
| wmm_param->cwmax = WMA_WMM_EXPO_TO_VAL(edca_param->cw.max); |
| wmm_param->aifs = edca_param->aci.aifsn; |
| wmm_param->txoplimit = edca_param->txoplimit; |
| wmm_param->acm = edca_param->aci.acm; |
| |
| /* TODO: No ack is not present in EdcaParamRecord */ |
| wmm_param->no_ack = vos_config_is_no_ack(); |
| |
| WMA_LOGI("WMM PARAMS AC[%d]: AIFS %d Min %d Max %d TXOP %d ACM %d NOACK %d", |
| ac, |
| wmm_param->aifs, |
| wmm_param->cwmin, |
| wmm_param->cwmax, |
| wmm_param->txoplimit, |
| wmm_param->acm, |
| wmm_param->no_ack); |
| } |
| |
| /* |
| * Set TX power limit through vdev param |
| */ |
| static void wma_set_tx_power(WMA_HANDLE handle, |
| tMaxTxPowerParams *tx_pwr_params) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle)handle; |
| u_int8_t vdev_id; |
| int ret = -1; |
| void *pdev; |
| |
| if (tx_pwr_params->dev_mode == VOS_STA_SAP_MODE || |
| tx_pwr_params->dev_mode == VOS_P2P_GO_MODE) { |
| pdev = wma_find_vdev_by_addr(wma_handle, |
| tx_pwr_params->bssId, &vdev_id); |
| } else { |
| pdev = wma_find_vdev_by_bssid(wma_handle, |
| tx_pwr_params->bssId, &vdev_id); |
| } |
| if (!pdev) { |
| WMA_LOGE("vdev handle is invalid for %pM", tx_pwr_params->bssId); |
| vos_mem_free(tx_pwr_params); |
| return; |
| } |
| |
| if (!(wma_handle->interfaces[vdev_id].vdev_up)) { |
| WMA_LOGE("%s: vdev id %d is not up for %pM", __func__, vdev_id, |
| tx_pwr_params->bssId); |
| vos_mem_free(tx_pwr_params); |
| return; |
| } |
| |
| if (tx_pwr_params->power == 0) { |
| /* set to default. Since the app does not care the tx power |
| * we keep the previous setting */ |
| wma_handle->interfaces[vdev_id].tx_power = 0; |
| ret = 0; |
| goto end; |
| } |
| if (wma_handle->interfaces[vdev_id].max_tx_power != 0) { |
| /* make sure tx_power less than max_tx_power */ |
| if (tx_pwr_params->power > |
| wma_handle->interfaces[vdev_id].max_tx_power) { |
| tx_pwr_params->power = |
| wma_handle->interfaces[vdev_id].max_tx_power; |
| } |
| } |
| if (wma_handle->interfaces[vdev_id].tx_power != tx_pwr_params->power) { |
| |
| /* tx_power changed, Push the tx_power to FW */ |
| WMA_LOGI("%s: Set TX pwr limit WMI_VDEV_PARAM_TX_PWRLIMIT %d", |
| __func__, tx_pwr_params->power); |
| ret = wmi_unified_vdev_set_param_send(wma_handle->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_TX_PWRLIMIT, tx_pwr_params->power); |
| if (ret == 0) |
| wma_handle->interfaces[vdev_id].tx_power = tx_pwr_params->power; |
| } else { |
| /* no tx_power change */ |
| ret = 0; |
| } |
| end: |
| vos_mem_free(tx_pwr_params); |
| if (ret) |
| WMA_LOGE("Failed to set vdev param WMI_VDEV_PARAM_TX_PWRLIMIT"); |
| } |
| |
| /* |
| * Set TX power limit through vdev param |
| */ |
| static void wma_set_max_tx_power(WMA_HANDLE handle, |
| tMaxTxPowerParams *tx_pwr_params) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle)handle; |
| u_int8_t vdev_id; |
| int ret = -1; |
| void *pdev; |
| tPowerdBm prev_max_power; |
| |
| pdev = wma_find_vdev_by_addr(wma_handle, tx_pwr_params->bssId, &vdev_id); |
| if (pdev == NULL) { |
| /* not in SAP array. Try the station/p2p array */ |
| pdev = wma_find_vdev_by_bssid(wma_handle, |
| tx_pwr_params->bssId, &vdev_id); |
| } |
| if (!pdev) { |
| WMA_LOGE("vdev handle is invalid for %pM", tx_pwr_params->bssId); |
| vos_mem_free(tx_pwr_params); |
| return; |
| } |
| |
| if (! (wma_handle->interfaces[vdev_id].vdev_up)) { |
| WMA_LOGE("%s: vdev id %d is not up",__func__, vdev_id); |
| vos_mem_free(tx_pwr_params); |
| return; |
| } |
| |
| if (wma_handle->interfaces[vdev_id].max_tx_power == tx_pwr_params->power) { |
| ret = 0; |
| goto end; |
| } |
| prev_max_power = wma_handle->interfaces[vdev_id].max_tx_power; |
| wma_handle->interfaces[vdev_id].max_tx_power = tx_pwr_params->power; |
| if (wma_handle->interfaces[vdev_id].max_tx_power == 0) { |
| ret = 0; |
| goto end; |
| } |
| WMA_LOGI("Set MAX TX pwr limit [WMI_VDEV_PARAM_TX_PWRLIMIT] to %d", |
| wma_handle->interfaces[vdev_id].max_tx_power); |
| ret = wmi_unified_vdev_set_param_send(wma_handle->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_TX_PWRLIMIT, |
| wma_handle->interfaces[vdev_id].max_tx_power); |
| if (ret == 0) |
| wma_handle->interfaces[vdev_id].tx_power = |
| wma_handle->interfaces[vdev_id].max_tx_power; |
| else |
| wma_handle->interfaces[vdev_id].max_tx_power = prev_max_power; |
| end: |
| vos_mem_free(tx_pwr_params); |
| if (ret) |
| WMA_LOGE("%s: Failed to set vdev param WMI_VDEV_PARAM_TX_PWRLIMIT", __func__); |
| } |
| |
| /* |
| * Function to update the EDCA parameters to the target |
| */ |
| static VOS_STATUS wma_process_update_edca_param_req(WMA_HANDLE handle, |
| tEdcaParams *edca_params) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| u_int8_t *buf_ptr; |
| wmi_buf_t buf; |
| wmi_vdev_set_wmm_params_cmd_fixed_param *cmd; |
| wmi_wmm_vparams *wmm_param; |
| tSirMacEdcaParamRecord *edca_record; |
| int ac; |
| int len = sizeof(*cmd); |
| ol_txrx_pdev_handle pdev; |
| struct ol_tx_wmm_param_t ol_tx_wmm_param; |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| |
| if (!buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_vdev_set_wmm_params_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_set_wmm_params_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vdev_set_wmm_params_cmd_fixed_param)); |
| cmd->vdev_id = edca_params->bssIdx; |
| |
| for (ac = 0; ac < WME_NUM_AC; ac++) { |
| wmm_param = (wmi_wmm_vparams *)(&cmd->wmm_params[ac]); |
| WMITLV_SET_HDR(&wmm_param->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_set_wmm_params_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_wmm_vparams)); |
| switch (ac) { |
| case WME_AC_BE: |
| edca_record = &edca_params->acbe; |
| break; |
| case WME_AC_BK: |
| edca_record = &edca_params->acbk; |
| break; |
| case WME_AC_VI: |
| edca_record = &edca_params->acvi; |
| break; |
| case WME_AC_VO: |
| edca_record = &edca_params->acvo; |
| break; |
| default: |
| goto fail; |
| } |
| |
| wma_update_edca_params_for_ac(edca_record, wmm_param, ac); |
| |
| ol_tx_wmm_param.ac[ac].aifs = wmm_param->aifs; |
| ol_tx_wmm_param.ac[ac].cwmin = wmm_param->cwmin; |
| ol_tx_wmm_param.ac[ac].cwmax = wmm_param->cwmax; |
| } |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_VDEV_SET_WMM_PARAMS_CMDID)) |
| goto fail; |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma_handle->vos_context); |
| if (pdev) { |
| wdi_in_set_wmm_param(pdev, ol_tx_wmm_param); |
| } |
| return VOS_STATUS_SUCCESS; |
| |
| fail: |
| wmi_buf_free(buf); |
| WMA_LOGE("%s: Failed to set WMM Paremeters", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| static int wmi_unified_probe_rsp_tmpl_send(tp_wma_handle wma, |
| u_int8_t vdev_id, |
| tpSendProbeRespParams probe_rsp_info) |
| { |
| wmi_prb_tmpl_cmd_fixed_param *cmd; |
| wmi_bcn_prb_info *bcn_prb_info; |
| wmi_buf_t wmi_buf; |
| u_int32_t tmpl_len, tmpl_len_aligned, wmi_buf_len; |
| u_int8_t *frm, *buf_ptr; |
| int ret; |
| u_int64_t adjusted_tsf_le; |
| struct ieee80211_frame *wh; |
| |
| WMA_LOGD(FL("Send probe response template for vdev %d"), vdev_id); |
| |
| frm = probe_rsp_info->pProbeRespTemplate; |
| tmpl_len = probe_rsp_info->probeRespTemplateLen; |
| tmpl_len_aligned = roundup(tmpl_len, sizeof(A_UINT32)); |
| /* |
| * Make the TSF offset negative so probe response in the same |
| * staggered batch have the same TSF. |
| */ |
| adjusted_tsf_le = cpu_to_le64(0ULL - |
| wma->interfaces[vdev_id].tsfadjust); |
| /* Update the timstamp in the probe response buffer with adjusted TSF */ |
| wh = (struct ieee80211_frame *)frm; |
| A_MEMCPY(&wh[1], &adjusted_tsf_le, sizeof(adjusted_tsf_le)); |
| |
| wmi_buf_len = sizeof(wmi_prb_tmpl_cmd_fixed_param) + |
| sizeof(wmi_bcn_prb_info) + WMI_TLV_HDR_SIZE + |
| tmpl_len_aligned; |
| |
| if (wmi_buf_len > BEACON_TX_BUFFER_SIZE) { |
| WMA_LOGE(FL("wmi_buf_len: %d > %d. Can't send wmi cmd"), |
| wmi_buf_len, BEACON_TX_BUFFER_SIZE); |
| return -EINVAL; |
| } |
| |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, wmi_buf_len); |
| if (!wmi_buf) { |
| WMA_LOGE(FL("wmi_buf_alloc failed")); |
| return -ENOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(wmi_buf); |
| |
| cmd = (wmi_prb_tmpl_cmd_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_prb_tmpl_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_prb_tmpl_cmd_fixed_param)); |
| cmd->vdev_id = vdev_id; |
| cmd->buf_len = tmpl_len; |
| buf_ptr += sizeof(wmi_prb_tmpl_cmd_fixed_param); |
| |
| bcn_prb_info = (wmi_bcn_prb_info *)buf_ptr; |
| WMITLV_SET_HDR(&bcn_prb_info->tlv_header, |
| WMITLV_TAG_STRUC_wmi_bcn_prb_info, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_bcn_prb_info)); |
| bcn_prb_info->caps = 0; |
| bcn_prb_info->erp = 0; |
| buf_ptr += sizeof(wmi_bcn_prb_info); |
| |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, tmpl_len_aligned); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| vos_mem_copy(buf_ptr, frm, tmpl_len); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, |
| wmi_buf, wmi_buf_len, |
| WMI_PRB_TMPL_CMDID); |
| if (ret) { |
| WMA_LOGE(FL("Failed to send PRB RSP tmpl: %d"), ret); |
| wmi_buf_free(wmi_buf); |
| } |
| |
| return ret; |
| } |
| |
| static int wmi_unified_bcn_tmpl_send(tp_wma_handle wma, |
| u_int8_t vdev_id, |
| tpSendbeaconParams bcn_info, |
| u_int8_t bytes_to_strip) |
| { |
| wmi_bcn_tmpl_cmd_fixed_param *cmd; |
| wmi_bcn_prb_info *bcn_prb_info; |
| wmi_buf_t wmi_buf; |
| u_int32_t tmpl_len, tmpl_len_aligned, wmi_buf_len; |
| u_int8_t *frm, *buf_ptr; |
| int ret; |
| u_int8_t *p2p_ie; |
| u_int16_t p2p_ie_len = 0; |
| u_int64_t adjusted_tsf_le; |
| struct ieee80211_frame *wh; |
| |
| |
| WMA_LOGD("Send beacon template for vdev %d", vdev_id); |
| |
| if (bcn_info->p2pIeOffset) { |
| p2p_ie = bcn_info->beacon + bcn_info->p2pIeOffset; |
| p2p_ie_len = (u_int16_t) p2p_ie[1] + 2; |
| } |
| |
| /* |
| * XXX: The first byte of beacon buffer contains beacon length |
| * only when UMAC in sending the beacon template. In othercases |
| * (ex: from tbtt update) beacon length is read from beacon |
| * information. |
| */ |
| if (bytes_to_strip) |
| tmpl_len = *(u_int32_t *)&bcn_info->beacon[0]; |
| else |
| tmpl_len = bcn_info->beaconLength; |
| if (p2p_ie_len) { |
| tmpl_len -= (u_int32_t) p2p_ie_len; |
| } |
| |
| frm = bcn_info->beacon + bytes_to_strip; |
| tmpl_len_aligned = roundup(tmpl_len, sizeof(A_UINT32)); |
| /* |
| * Make the TSF offset negative so beacons in the same |
| * staggered batch have the same TSF. |
| */ |
| adjusted_tsf_le = cpu_to_le64(0ULL - |
| wma->interfaces[vdev_id].tsfadjust); |
| /* Update the timstamp in the beacon buffer with adjusted TSF */ |
| wh = (struct ieee80211_frame *)frm; |
| A_MEMCPY(&wh[1], &adjusted_tsf_le, sizeof(adjusted_tsf_le)); |
| |
| wmi_buf_len = sizeof(wmi_bcn_tmpl_cmd_fixed_param) + |
| sizeof(wmi_bcn_prb_info) + WMI_TLV_HDR_SIZE + |
| tmpl_len_aligned; |
| |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, wmi_buf_len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(wmi_buf); |
| |
| cmd = (wmi_bcn_tmpl_cmd_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_bcn_tmpl_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_bcn_tmpl_cmd_fixed_param)); |
| cmd->vdev_id = vdev_id; |
| cmd->tim_ie_offset = bcn_info->timIeOffset - bytes_to_strip; |
| cmd->buf_len = tmpl_len; |
| buf_ptr += sizeof(wmi_bcn_tmpl_cmd_fixed_param); |
| |
| bcn_prb_info = (wmi_bcn_prb_info *)buf_ptr; |
| WMITLV_SET_HDR(&bcn_prb_info->tlv_header, |
| WMITLV_TAG_STRUC_wmi_bcn_prb_info, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_bcn_prb_info)); |
| bcn_prb_info->caps = 0; |
| bcn_prb_info->erp = 0; |
| buf_ptr += sizeof(wmi_bcn_prb_info); |
| |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, tmpl_len_aligned); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| vos_mem_copy(buf_ptr, frm, tmpl_len); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, |
| wmi_buf, wmi_buf_len, |
| WMI_BCN_TMPL_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send bcn tmpl: %d", __func__, ret); |
| wmi_buf_free(wmi_buf); |
| } |
| |
| return ret; |
| } |
| |
| VOS_STATUS wma_store_bcn_tmpl(tp_wma_handle wma, u_int8_t vdev_id, |
| tpSendbeaconParams bcn_info) |
| { |
| struct beacon_info *bcn; |
| u_int32_t len; |
| u_int8_t *bcn_payload; |
| struct beacon_tim_ie *tim_ie; |
| |
| bcn = wma->interfaces[vdev_id].beacon; |
| if (!bcn || !bcn->buf) { |
| WMA_LOGE("%s: Memory is not allocated to hold bcn template", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| len = *(u32 *)&bcn_info->beacon[0]; |
| if (len > WMA_BCN_BUF_MAX_SIZE) { |
| WMA_LOGE("%s: Received beacon len %d exceeding max limit %d", |
| __func__, len, WMA_BCN_BUF_MAX_SIZE); |
| return VOS_STATUS_E_INVAL; |
| } |
| WMA_LOGD("%s: Storing received beacon template buf to local buffer", |
| __func__); |
| adf_os_spin_lock_bh(&bcn->lock); |
| |
| /* |
| * Copy received beacon template content in local buffer. |
| * this will be send to target on the reception of SWBA |
| * event from target. |
| */ |
| adf_nbuf_trim_tail(bcn->buf, adf_nbuf_len(bcn->buf)); |
| memcpy(adf_nbuf_data(bcn->buf), |
| bcn_info->beacon + 4 /* Exclude beacon length field */, |
| len); |
| if (bcn_info->timIeOffset > 3) |
| { |
| bcn->tim_ie_offset = bcn_info->timIeOffset - 4; |
| } |
| else |
| { |
| bcn->tim_ie_offset = bcn_info->timIeOffset; |
| } |
| |
| if (bcn_info->p2pIeOffset > 3) |
| { |
| bcn->p2p_ie_offset = bcn_info->p2pIeOffset - 4; |
| } |
| else |
| { |
| bcn->p2p_ie_offset = bcn_info->p2pIeOffset; |
| } |
| bcn_payload = adf_nbuf_data(bcn->buf); |
| if (bcn->tim_ie_offset) |
| { |
| tim_ie = (struct beacon_tim_ie *)(&bcn_payload[bcn->tim_ie_offset]); |
| /* |
| * Intial Value of bcn->dtim_count will be 0. |
| * But if the beacon gets updated then current dtim |
| * count will be restored |
| */ |
| tim_ie->dtim_count = bcn->dtim_count; |
| tim_ie->tim_bitctl = 0; |
| } |
| |
| adf_nbuf_put_tail(bcn->buf, len); |
| bcn->len = len; |
| |
| adf_os_spin_unlock_bh(&bcn->lock); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| |
| |
| static int wma_tbtt_update_ind(tp_wma_handle wma, u_int8_t *buf) |
| { |
| struct wma_txrx_node *intf; |
| struct beacon_info *bcn; |
| tSendbeaconParams bcn_info; |
| u_int32_t *adjusted_tsf = NULL; |
| u_int32_t if_id = 0, vdev_map; |
| u_int32_t num_tbttoffset_list; |
| wmi_tbtt_offset_event_fixed_param *tbtt_offset_event; |
| WMA_LOGI("%s: Enter", __func__); |
| if (!buf) { |
| WMA_LOGE("Invalid event buffer"); |
| return -EINVAL; |
| } |
| if (!wma) { |
| WMA_LOGE("Invalid wma handle"); |
| return -EINVAL; |
| } |
| intf = wma->interfaces; |
| tbtt_offset_event = (wmi_tbtt_offset_event_fixed_param *)buf; |
| vdev_map = tbtt_offset_event->vdev_map; |
| num_tbttoffset_list = *(u_int32_t *)(buf + sizeof(wmi_tbtt_offset_event_fixed_param)); |
| adjusted_tsf = (u_int32_t *) ((u_int8_t *)buf + |
| sizeof(wmi_tbtt_offset_event_fixed_param) + |
| sizeof (u_int32_t)); |
| if (!adjusted_tsf) { |
| WMA_LOGE("%s: Invalid adjusted_tsf", __func__); |
| return -EINVAL; |
| } |
| |
| for ( ;(vdev_map); vdev_map >>= 1, if_id++) { |
| if (!(vdev_map & 0x1) || (!(intf[if_id].handle))) |
| continue; |
| |
| bcn = intf[if_id].beacon; |
| if (!bcn) { |
| WMA_LOGE("%s: Invalid beacon", __func__); |
| return -EINVAL; |
| } |
| if (!bcn->buf) { |
| WMA_LOGE("%s: Invalid beacon buffer", __func__); |
| return -EINVAL; |
| } |
| /* Save the adjusted TSF */ |
| intf[if_id].tsfadjust = adjusted_tsf[if_id]; |
| |
| adf_os_spin_lock_bh(&bcn->lock); |
| vos_mem_zero(&bcn_info, sizeof(bcn_info)); |
| bcn_info.beacon = adf_nbuf_data(bcn->buf); |
| bcn_info.p2pIeOffset = bcn->p2p_ie_offset; |
| bcn_info.beaconLength = bcn->len; |
| bcn_info.timIeOffset = bcn->tim_ie_offset; |
| adf_os_spin_unlock_bh(&bcn->lock); |
| |
| /* Update beacon template in firmware */ |
| wmi_unified_bcn_tmpl_send(wma, if_id, &bcn_info, 0); |
| } |
| return 0; |
| } |
| |
| static int wma_tbttoffset_update_event_handler(void *handle, u_int8_t *event, |
| u_int32_t len) |
| { |
| WMI_TBTTOFFSET_UPDATE_EVENTID_param_tlvs *param_buf; |
| wmi_tbtt_offset_event_fixed_param *tbtt_offset_event; |
| u_int8_t *buf, *tempBuf; |
| vos_msg_t vos_msg = {0}; |
| |
| param_buf = (WMI_TBTTOFFSET_UPDATE_EVENTID_param_tlvs *)event; |
| if(!param_buf) { |
| WMA_LOGE("Invalid tbtt update event buffer"); |
| return -EINVAL; |
| } |
| |
| tbtt_offset_event = param_buf->fixed_param; |
| |
| if (param_buf->num_tbttoffset_list > |
| (UINT_MAX - sizeof(u_int32_t) - |
| sizeof(wmi_tbtt_offset_event_fixed_param))/ |
| sizeof(u_int32_t)) { |
| WMA_LOGE("%s: Received offset list %d greater than maximum limit", |
| __func__, param_buf->num_tbttoffset_list); |
| return -EINVAL; |
| } |
| |
| buf = vos_mem_malloc(sizeof(wmi_tbtt_offset_event_fixed_param) + |
| sizeof (u_int32_t) + |
| (param_buf->num_tbttoffset_list * sizeof (u_int32_t))); |
| if (!buf) { |
| WMA_LOGE("%s: Failed alloc memory for buf", __func__); |
| return -EINVAL; |
| } |
| |
| tempBuf = buf; |
| vos_mem_zero(buf, (sizeof(wmi_tbtt_offset_event_fixed_param) + |
| sizeof (u_int32_t) + |
| (param_buf->num_tbttoffset_list * sizeof (u_int32_t)))); |
| vos_mem_copy(buf, (u_int8_t *)tbtt_offset_event, sizeof (wmi_tbtt_offset_event_fixed_param)); |
| buf += sizeof (wmi_tbtt_offset_event_fixed_param); |
| |
| vos_mem_copy(buf, (u_int8_t *) ¶m_buf->num_tbttoffset_list, sizeof (u_int32_t)); |
| buf += sizeof(u_int32_t); |
| |
| vos_mem_copy(buf, (u_int8_t *)param_buf->tbttoffset_list, (param_buf->num_tbttoffset_list * sizeof(u_int32_t))); |
| |
| vos_msg.type = WDA_TBTT_UPDATE_IND; |
| vos_msg.bodyptr = tempBuf; |
| vos_msg.bodyval = 0; |
| |
| if (VOS_STATUS_SUCCESS != |
| vos_mq_post_message(VOS_MQ_ID_WDA, &vos_msg)) { |
| WMA_LOGP("%s: Failed to post WDA_TBTT_UPDATE_IND msg", __func__); |
| vos_mem_free(tempBuf); |
| return -1; |
| } |
| WMA_LOGD("WDA_TBTT_UPDATE_IND posted"); |
| return 0; |
| } |
| |
| |
| static int wma_p2p_go_set_beacon_ie(t_wma_handle *wma_handle, |
| A_UINT32 vdev_id, u_int8_t *p2pIe) |
| { |
| int ret; |
| wmi_p2p_go_set_beacon_ie_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| u_int32_t ie_len, ie_len_aligned, wmi_buf_len; |
| u_int8_t *buf_ptr; |
| |
| ie_len = (u_int32_t) (p2pIe[1] + 2); |
| |
| /* More than one P2P IE may be included in a single frame. |
| If multiple P2P IEs are present, the complete P2P attribute |
| data consists of the concatenation of the P2P Attribute |
| fields of the P2P IEs. The P2P Attributes field of each |
| P2P IE may be any length up to the maximum (251 octets). |
| In this case host sends one P2P IE to firmware so the length |
| should not exceed more than 251 bytes |
| */ |
| if (ie_len > 251) { |
| WMA_LOGE("%s : invalid p2p ie length %u", __func__, ie_len); |
| return -EINVAL; |
| } |
| |
| ie_len_aligned = roundup(ie_len, sizeof(A_UINT32)); |
| |
| wmi_buf_len = sizeof(wmi_p2p_go_set_beacon_ie_fixed_param) + ie_len_aligned + WMI_TLV_HDR_SIZE; |
| |
| wmi_buf = wmi_buf_alloc(wma_handle->wmi_handle, wmi_buf_len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(wmi_buf); |
| |
| cmd = (wmi_p2p_go_set_beacon_ie_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_p2p_go_set_beacon_ie_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_p2p_go_set_beacon_ie_fixed_param)); |
| cmd->vdev_id = vdev_id; |
| cmd->ie_buf_len = ie_len; |
| |
| buf_ptr += sizeof(wmi_p2p_go_set_beacon_ie_fixed_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, ie_len_aligned); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| vos_mem_copy(buf_ptr, p2pIe, ie_len); |
| |
| WMA_LOGI("%s: Sending WMI_P2P_GO_SET_BEACON_IE", __func__); |
| |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, |
| wmi_buf, wmi_buf_len, |
| WMI_P2P_GO_SET_BEACON_IE |
| ); |
| if (ret) { |
| WMA_LOGE("Failed to send bcn tmpl: %d", ret); |
| wmi_buf_free(wmi_buf); |
| } |
| |
| WMA_LOGI("%s: Successfully sent WMI_P2P_GO_SET_BEACON_IE", __func__); |
| return ret; |
| } |
| |
| static void wma_send_probe_rsp_tmpl(tp_wma_handle wma, |
| tpSendProbeRespParams probe_rsp_info) |
| { |
| ol_txrx_vdev_handle vdev; |
| u_int8_t vdev_id; |
| tpAniProbeRspStruct probe_rsp; |
| |
| if(!probe_rsp_info) { |
| WMA_LOGE(FL("probe_rsp_info is NULL")); |
| return; |
| } |
| |
| probe_rsp = (tpAniProbeRspStruct)(probe_rsp_info->pProbeRespTemplate); |
| if(!probe_rsp) { |
| WMA_LOGE(FL("probe_rsp is NULL")); |
| return; |
| } |
| |
| vdev = wma_find_vdev_by_addr(wma, probe_rsp->macHdr.sa, &vdev_id); |
| if (!vdev) { |
| WMA_LOGE(FL("failed to get vdev handle")); |
| return; |
| } |
| |
| if (WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_BEACON_OFFLOAD)) { |
| WMA_LOGI("Beacon Offload Enabled Sending Unified command"); |
| if (wmi_unified_probe_rsp_tmpl_send(wma, vdev_id, |
| probe_rsp_info) < 0){ |
| WMA_LOGE(FL("wmi_unified_probe_rsp_tmpl_send Failed ")); |
| return; |
| } |
| } |
| } |
| |
| static void wma_send_beacon(tp_wma_handle wma, tpSendbeaconParams bcn_info) |
| { |
| ol_txrx_vdev_handle vdev; |
| u_int8_t vdev_id; |
| VOS_STATUS status; |
| u_int8_t *p2p_ie; |
| tpAniBeaconStruct beacon; |
| |
| beacon = (tpAniBeaconStruct)(bcn_info->beacon); |
| vdev = wma_find_vdev_by_addr(wma, beacon->macHdr.sa, &vdev_id); |
| if (!vdev) { |
| WMA_LOGE("%s : failed to get vdev handle", __func__); |
| return; |
| } |
| |
| if (WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_BEACON_OFFLOAD)) { |
| WMA_LOGI("Beacon Offload Enabled Sending Unified command"); |
| if (wmi_unified_bcn_tmpl_send(wma, vdev_id, bcn_info, 4) < 0){ |
| WMA_LOGE("%s : wmi_unified_bcn_tmpl_send Failed ", __func__); |
| return; |
| } |
| |
| if (bcn_info->p2pIeOffset) { |
| p2p_ie = bcn_info->beacon + bcn_info->p2pIeOffset; |
| WMA_LOGI(" %s: p2pIe is present - vdev_id %hu, p2p_ie = %pK, p2p ie len = %hu", |
| __func__, vdev_id, p2p_ie, p2p_ie[1]); |
| if (wma_p2p_go_set_beacon_ie(wma, vdev_id, p2p_ie) < 0) { |
| WMA_LOGE("%s : wmi_unified_bcn_tmpl_send Failed ", __func__); |
| return; |
| } |
| } |
| } |
| status = wma_store_bcn_tmpl(wma, vdev_id, bcn_info); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s : wma_store_bcn_tmpl Failed", __func__); |
| return; |
| } |
| if (!((adf_os_atomic_read( |
| &wma->interfaces[vdev_id].vdev_restart_params.hidden_ssid_restart_in_progress)) || |
| (wma->interfaces[vdev_id].is_channel_switch))) { |
| if (!wma->interfaces[vdev_id].vdev_up) { |
| if (wmi_unified_vdev_up_send(wma->wmi_handle, vdev_id, 0, |
| bcn_info->bssId) < 0) { |
| WMA_LOGE("%s : failed to send vdev up", __func__); |
| return; |
| } |
| wma->interfaces[vdev_id].vdev_up = TRUE; |
| wma_set_sap_keepalive(wma, vdev_id); |
| } |
| } |
| } |
| |
| #if !defined(REMOVE_PKT_LOG) |
| static VOS_STATUS wma_pktlog_wmi_send_cmd(WMA_HANDLE handle, |
| struct ath_pktlog_wmi_params *params) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| WMI_PKTLOG_EVENT PKTLOG_EVENT; |
| WMI_CMD_ID CMD_ID; |
| wmi_pdev_pktlog_enable_cmd_fixed_param *cmd; |
| wmi_pdev_pktlog_disable_cmd_fixed_param *disable_cmd; |
| int len = 0; |
| wmi_buf_t buf; |
| |
| /*Check if packet log is enabled in cfg.ini*/ |
| if (! vos_is_packet_log_enabled()) |
| { |
| WMA_LOGE("%s:pkt log is not enabled in cfg.ini", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| |
| PKTLOG_EVENT = params->pktlog_event; |
| CMD_ID = params->cmd_id; |
| |
| switch (CMD_ID) { |
| case WMI_PDEV_PKTLOG_ENABLE_CMDID: |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| cmd = |
| (wmi_pdev_pktlog_enable_cmd_fixed_param *)wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_pdev_pktlog_enable_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_pdev_pktlog_enable_cmd_fixed_param)); |
| cmd->evlist = PKTLOG_EVENT; |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_PDEV_PKTLOG_ENABLE_CMDID)) { |
| WMA_LOGE("failed to send pktlog enable cmdid"); |
| goto wmi_send_failed; |
| } |
| break; |
| case WMI_PDEV_PKTLOG_DISABLE_CMDID: |
| len = sizeof(*disable_cmd); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| disable_cmd = (wmi_pdev_pktlog_disable_cmd_fixed_param *) |
| wmi_buf_data(buf); |
| WMITLV_SET_HDR(&disable_cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_pdev_pktlog_disable_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_pdev_pktlog_disable_cmd_fixed_param)); |
| disable_cmd->pdev_id = 0; |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_PDEV_PKTLOG_DISABLE_CMDID)) { |
| WMA_LOGE("failed to send pktlog disable cmdid"); |
| goto wmi_send_failed; |
| } |
| break; |
| default: |
| WMA_LOGD("%s: invalid PKTLOG command", __func__); |
| break; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| |
| wmi_send_failed: |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| #endif |
| |
| static int32_t wmi_unified_set_sta_ps(wmi_unified_t wmi_handle, |
| u_int32_t vdev_id, u_int8_t val) |
| { |
| wmi_sta_powersave_mode_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len = sizeof(*cmd); |
| |
| WMA_LOGD("Set Sta Mode Ps vdevId %d val %d", vdev_id, val); |
| |
| buf = wmi_buf_alloc(wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: Set Sta Mode Ps Mem Alloc Failed", __func__); |
| return -ENOMEM; |
| } |
| cmd = (wmi_sta_powersave_mode_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_sta_powersave_mode_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_sta_powersave_mode_cmd_fixed_param)); |
| cmd->vdev_id = vdev_id; |
| if(val) |
| cmd->sta_ps_mode = WMI_STA_PS_MODE_ENABLED; |
| else |
| cmd->sta_ps_mode = WMI_STA_PS_MODE_DISABLED; |
| |
| if(wmi_unified_cmd_send(wmi_handle, buf, len, |
| WMI_STA_POWERSAVE_MODE_CMDID)) |
| { |
| WMA_LOGE("Set Sta Mode Ps Failed vdevId %d val %d", |
| vdev_id, val); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static inline u_int32_t wma_get_uapsd_mask(tpUapsd_Params uapsd_params) |
| { |
| u_int32_t uapsd_val = 0; |
| |
| if(uapsd_params->beDeliveryEnabled) |
| uapsd_val |= WMI_STA_PS_UAPSD_AC0_DELIVERY_EN; |
| |
| if(uapsd_params->beTriggerEnabled) |
| uapsd_val |= WMI_STA_PS_UAPSD_AC0_TRIGGER_EN; |
| |
| if(uapsd_params->bkDeliveryEnabled) |
| uapsd_val |= WMI_STA_PS_UAPSD_AC1_DELIVERY_EN; |
| |
| if(uapsd_params->bkTriggerEnabled) |
| uapsd_val |= WMI_STA_PS_UAPSD_AC1_TRIGGER_EN; |
| |
| if(uapsd_params->viDeliveryEnabled) |
| uapsd_val |= WMI_STA_PS_UAPSD_AC2_DELIVERY_EN; |
| |
| if(uapsd_params->viTriggerEnabled) |
| uapsd_val |= WMI_STA_PS_UAPSD_AC2_TRIGGER_EN; |
| |
| if(uapsd_params->voDeliveryEnabled) |
| uapsd_val |= WMI_STA_PS_UAPSD_AC3_DELIVERY_EN; |
| |
| if(uapsd_params->voTriggerEnabled) |
| uapsd_val |= WMI_STA_PS_UAPSD_AC3_TRIGGER_EN; |
| |
| return uapsd_val; |
| } |
| |
| static int32_t wma_set_force_sleep(tp_wma_handle wma, u_int32_t vdev_id, |
| u_int8_t enable, enum powersave_qpower_mode qpower_config) |
| { |
| int32_t ret; |
| tANI_U32 cfg_data_val = 0; |
| /* get mac to acess CFG data base */ |
| struct sAniSirGlobal *mac = |
| (struct sAniSirGlobal*)vos_get_context(VOS_MODULE_ID_PE, |
| wma->vos_context); |
| u_int32_t rx_wake_policy; |
| u_int32_t tx_wake_threshold; |
| u_int32_t pspoll_count; |
| u_int32_t inactivity_time; |
| u_int32_t psmode; |
| |
| WMA_LOGD("Set Force Sleep vdevId %d val %d", vdev_id, enable); |
| |
| if (NULL == mac) { |
| WMA_LOGE("%s: Unable to get PE context", __func__); |
| return -ENOMEM; |
| } |
| |
| /* Set Tx/Rx Data InActivity Timeout */ |
| if (wlan_cfgGetInt(mac, WNI_CFG_PS_DATA_INACTIVITY_TIMEOUT, |
| &cfg_data_val ) != eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get WNI_CFG_PS_DATA_INACTIVITY_TIMEOUT"); |
| cfg_data_val = POWERSAVE_DEFAULT_INACTIVITY_TIME; |
| } |
| inactivity_time = (u_int32_t)cfg_data_val; |
| |
| if (enable) { |
| /* override normal configuration and force station asleep */ |
| rx_wake_policy = WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD; |
| tx_wake_threshold = WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER; |
| |
| if (wlan_cfgGetInt(mac, WNI_CFG_MAX_PS_POLL, |
| &cfg_data_val ) != eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get value for WNI_CFG_MAX_PS_POLL"); |
| } |
| if (cfg_data_val) |
| pspoll_count = (u_int32_t)cfg_data_val; |
| else |
| pspoll_count = WMA_DEFAULT_MAX_PSPOLL_BEFORE_WAKE; |
| |
| psmode = WMI_STA_PS_MODE_ENABLED; |
| } else { |
| /* Ps Poll Wake Policy */ |
| if (wlan_cfgGetInt(mac, WNI_CFG_MAX_PS_POLL, |
| &cfg_data_val ) != eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get value for WNI_CFG_MAX_PS_POLL"); |
| } |
| if (cfg_data_val) { |
| /* Ps Poll is enabled */ |
| rx_wake_policy = WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD; |
| pspoll_count = (u_int32_t)cfg_data_val; |
| tx_wake_threshold = WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER; |
| } else { |
| rx_wake_policy = WMI_STA_PS_RX_WAKE_POLICY_WAKE; |
| pspoll_count = WMI_STA_PS_PSPOLL_COUNT_NO_MAX; |
| tx_wake_threshold = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS; |
| } |
| psmode = WMI_STA_PS_MODE_ENABLED; |
| } |
| |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, vdev_id, |
| WMI_STA_PS_ENABLE_QPOWER, qpower_config); |
| if (ret) { |
| WMA_LOGE("%s(%d) QPower Failed vdevId %d", |
| qpower_config ? "Enable" : "Disable", |
| qpower_config, vdev_id); |
| return ret; |
| } |
| WMA_LOGD("QPower %s(%d) vdevId %d", |
| qpower_config ? "Enabled" : "Disabled", |
| qpower_config, vdev_id); |
| |
| /* Set the Wake Policy to WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD*/ |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, vdev_id, |
| WMI_STA_PS_PARAM_RX_WAKE_POLICY, |
| rx_wake_policy); |
| |
| if (ret) { |
| WMA_LOGE("Setting wake policy Failed vdevId %d", vdev_id); |
| return ret; |
| } |
| WMA_LOGD("Setting wake policy to %d vdevId %d", |
| rx_wake_policy, vdev_id); |
| |
| /* Set the Tx Wake Threshold */ |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, vdev_id, |
| WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD, |
| tx_wake_threshold); |
| |
| if (ret) { |
| WMA_LOGE("Setting TxWake Threshold vdevId %d", vdev_id); |
| return ret; |
| } |
| WMA_LOGD("Setting TxWake Threshold to %d vdevId %d", |
| tx_wake_threshold, vdev_id); |
| |
| /* Set the Ps Poll Count */ |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, vdev_id, |
| WMI_STA_PS_PARAM_PSPOLL_COUNT, |
| pspoll_count); |
| |
| if (ret) { |
| WMA_LOGE("Set Ps Poll Count Failed vdevId %d ps poll cnt %d", |
| vdev_id, pspoll_count); |
| return ret; |
| } |
| WMA_LOGD("Set Ps Poll Count vdevId %d ps poll cnt %d", |
| vdev_id, pspoll_count); |
| |
| /* Set the Tx/Rx InActivity */ |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, vdev_id, |
| WMI_STA_PS_PARAM_INACTIVITY_TIME, |
| inactivity_time); |
| |
| if (ret) { |
| WMA_LOGE("Setting Tx/Rx InActivity Failed vdevId %d InAct %d", |
| vdev_id, inactivity_time); |
| return ret; |
| } |
| WMA_LOGD("Set Tx/Rx InActivity vdevId %d InAct %d", |
| vdev_id, inactivity_time); |
| |
| /* Enable Sta Mode Power save */ |
| ret = wmi_unified_set_sta_ps(wma->wmi_handle, vdev_id, true); |
| |
| if (ret) { |
| WMA_LOGE("Enable Sta Mode Ps Failed vdevId %d", vdev_id); |
| return ret; |
| } |
| |
| /* Set Listen Interval */ |
| if (wlan_cfgGetInt(mac, WNI_CFG_LISTEN_INTERVAL, |
| &cfg_data_val ) != eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get value for WNI_CFG_LISTEN_INTERVAL"); |
| cfg_data_val = POWERSAVE_DEFAULT_LISTEN_INTERVAL; |
| } |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_LISTEN_INTERVAL, |
| cfg_data_val); |
| if (ret) { |
| /* Even it fails continue Fw will take default LI */ |
| WMA_LOGE("Failed to Set Listen Interval vdevId %d", |
| vdev_id); |
| } |
| WMA_LOGD("Set Listen Interval vdevId %d Listen Intv %d", |
| vdev_id, cfg_data_val); |
| return 0; |
| } |
| |
| int32_t wma_set_qpower_force_sleep(tp_wma_handle wma, u_int32_t vdev_id, |
| u_int8_t enable) |
| { |
| int32_t ret; |
| tANI_U32 cfg_data_val = 0; |
| /* get mac to acess CFG data base */ |
| struct sAniSirGlobal *mac = |
| (struct sAniSirGlobal*)vos_get_context(VOS_MODULE_ID_PE, |
| wma->vos_context); |
| u_int32_t pspoll_count = WMA_DEFAULT_MAX_PSPOLL_BEFORE_WAKE; |
| enum powersave_qpower_mode qpower_config = wma_get_qpower_config(wma); |
| |
| WMA_LOGE("Set QPower Force(1)/Normal(0) Sleep vdevId %d val %d", |
| vdev_id, enable); |
| |
| if (NULL == mac) { |
| WMA_LOGE("%s: Unable to get PE context", __func__); |
| return -ENOMEM; |
| } |
| |
| /* Get Configured Ps Poll Count */ |
| if (wlan_cfgGetInt(mac, WNI_CFG_MAX_PS_POLL, |
| &cfg_data_val ) != eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get value for WNI_CFG_MAX_PS_POLL"); |
| } |
| if (cfg_data_val) { |
| pspoll_count = (u_int32_t)cfg_data_val; |
| } |
| |
| if (qpower_config) { |
| /* Enable QPower */ |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, vdev_id, |
| WMI_STA_PS_ENABLE_QPOWER, qpower_config); |
| |
| if (ret) { |
| WMA_LOGE("Enable QPower Failed vdevId %d", vdev_id); |
| return ret; |
| } |
| WMA_LOGD("QPower Enabled vdevId %d", vdev_id); |
| } |
| |
| /* Set the Wake Policy to WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD*/ |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, vdev_id, |
| WMI_STA_PS_PARAM_RX_WAKE_POLICY, |
| WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD); |
| |
| if (ret) { |
| WMA_LOGE("Setting wake policy to pspoll/uapsd Failed vdevId %d", vdev_id); |
| return ret; |
| } |
| WMA_LOGD("Wake policy set to to pspoll/uapsd vdevId %d", |
| vdev_id); |
| |
| if (enable) { |
| /* Set the Tx Wake Threshold */ |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, vdev_id, |
| WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD, |
| WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER); |
| |
| if (ret) { |
| WMA_LOGE("Setting TxWake Threshold vdevId %d", vdev_id); |
| return ret; |
| } |
| WMA_LOGD("TxWake Threshold set to TX_WAKE_THRESHOLD_NEVER %d", vdev_id); |
| } |
| |
| /* Set the QPower Ps Poll Count */ |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, vdev_id, |
| WMI_STA_PS_PARAM_QPOWER_PSPOLL_COUNT, |
| pspoll_count); |
| |
| if (ret) { |
| WMA_LOGE("Set QPower Ps Poll Count Failed vdevId %d ps poll cnt %d", |
| vdev_id, pspoll_count); |
| return ret; |
| } |
| WMA_LOGD("Set QPower Ps Poll Count vdevId %d ps poll cnt %d", |
| vdev_id, pspoll_count); |
| |
| /* Enable Sta Mode Power save */ |
| ret = wmi_unified_set_sta_ps(wma->wmi_handle, vdev_id, true); |
| |
| if (ret) { |
| WMA_LOGE("Enable Sta Mode Ps Failed vdevId %d", vdev_id); |
| return ret; |
| } |
| |
| /* Set Listen Interval */ |
| if (wlan_cfgGetInt(mac, WNI_CFG_LISTEN_INTERVAL, |
| &cfg_data_val ) != eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get value for WNI_CFG_LISTEN_INTERVAL"); |
| cfg_data_val = POWERSAVE_DEFAULT_LISTEN_INTERVAL; |
| } |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_LISTEN_INTERVAL, |
| cfg_data_val); |
| if (ret) { |
| /* Even it fails continue Fw will take default LI */ |
| WMA_LOGE("Failed to Set Listen Interval vdevId %d", |
| vdev_id); |
| } |
| WMA_LOGD("Set Listen Interval vdevId %d Listen Intv %d", |
| vdev_id, cfg_data_val); |
| return 0; |
| } |
| |
| /** |
| * wma_get_qpower_config() - get qpower configuration |
| * @wma: WMA handle |
| * |
| * Power Save Offload configuration: |
| * 0 -> Power save offload is disabled |
| * 1 -> Legacy Power save enabled + Deep sleep Disabled |
| * 2 -> QPower enabled + Deep sleep Disabled |
| * 3 -> Legacy Power save enabled + Deep sleep Enabled |
| * 4 -> QPower enabled + Deep sleep Enabled |
| * 5 -> Duty cycling QPower enabled |
| * |
| * Return: enum powersave_qpower_mode with below values |
| * QPOWER_DISABLED if QPOWER is disabled |
| * QPOWER_ENABLED if QPOWER is enabled |
| * QPOWER_DUTY_CYCLING if DUTY CYCLING QPOWER is enabled |
| */ |
| static enum powersave_qpower_mode wma_get_qpower_config(tp_wma_handle wma) |
| { |
| switch (wma->powersave_mode) { |
| case PS_QPOWER_NODEEPSLEEP: |
| case PS_QPOWER_DEEPSLEEP: |
| WMA_LOGI("QPOWER is enabled in power save mode %d", |
| wma->powersave_mode); |
| return QPOWER_ENABLED; |
| case PS_DUTY_CYCLING_QPOWER: |
| WMA_LOGI("DUTY cycling QPOWER is enabled in power save mode %d", |
| wma->powersave_mode); |
| return QPOWER_DUTY_CYCLING; |
| |
| default: |
| WMA_LOGI("QPOWER is disabled in power save mode %d", |
| wma->powersave_mode); |
| return QPOWER_DISABLED; |
| } |
| } |
| |
| static void wma_enable_sta_ps_mode(tp_wma_handle wma, tpEnablePsParams ps_req) |
| { |
| uint32_t vdev_id = ps_req->sessionid; |
| int32_t ret; |
| enum powersave_qpower_mode qpower_config = wma_get_qpower_config(wma); |
| struct wma_txrx_node *iface = &wma->interfaces[vdev_id]; |
| |
| wma->psSetting = ps_req->psSetting; |
| |
| if (eSIR_ADDON_NOTHING == ps_req->psSetting) { |
| WMA_LOGD("Enable Sta Mode Ps vdevId %d", vdev_id); |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, vdev_id, |
| WMI_STA_PS_PARAM_UAPSD, 0); |
| if (ret) { |
| WMA_LOGE("Set Uapsd param 0 Failed vdevId %d", vdev_id); |
| ps_req->status = VOS_STATUS_E_FAILURE; |
| goto resp; |
| } |
| |
| ret = wma_set_force_sleep(wma, vdev_id, false, |
| qpower_config); |
| if (ret) { |
| WMA_LOGE("Enable Sta Ps Failed vdevId %d", vdev_id); |
| ps_req->status = VOS_STATUS_E_FAILURE; |
| goto resp; |
| } |
| } else if (eSIR_ADDON_ENABLE_UAPSD == ps_req->psSetting) { |
| u_int32_t uapsd_val = 0; |
| uapsd_val = wma_get_uapsd_mask(&ps_req->uapsdParams); |
| |
| if(uapsd_val != iface->uapsd_cached_val) { |
| WMA_LOGD("Enable Uapsd vdevId %d Mask %d", |
| vdev_id, uapsd_val); |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, |
| vdev_id, WMI_STA_PS_PARAM_UAPSD, |
| uapsd_val); |
| if (ret) { |
| WMA_LOGE("Enable Uapsd Failed vdevId %d", |
| vdev_id); |
| ps_req->status = VOS_STATUS_E_FAILURE; |
| goto resp; |
| } |
| /* Cache the Uapsd Mask */ |
| iface->uapsd_cached_val = uapsd_val; |
| } else { |
| WMA_LOGD("Already Uapsd Enabled vdevId %d Mask %d", |
| vdev_id, uapsd_val); |
| } |
| |
| WMA_LOGD("Enable Forced Sleep vdevId %d", vdev_id); |
| |
| ret = wma_set_force_sleep(wma, vdev_id, true, |
| qpower_config); |
| |
| if (ret) { |
| WMA_LOGE("Enable Forced Sleep Failed vdevId %d", |
| vdev_id); |
| ps_req->status = VOS_STATUS_E_FAILURE; |
| goto resp; |
| } |
| } |
| ps_req->status = VOS_STATUS_SUCCESS; |
| iface->dtimPeriod = ps_req->bcnDtimPeriod; |
| iface->in_bmps = true; |
| resp: |
| wma_send_msg(wma, WDA_ENTER_BMPS_RSP, ps_req, 0); |
| } |
| |
| static void wma_disable_sta_ps_mode(tp_wma_handle wma, tpDisablePsParams ps_req) |
| { |
| int32_t ret; |
| uint32_t vdev_id = ps_req->sessionid; |
| struct wma_txrx_node *iface = &wma->interfaces[vdev_id]; |
| |
| if (!iface) { |
| WMA_LOGE("Invalid vdev id not attched to any iface %d", |
| vdev_id); |
| ps_req->status = VOS_STATUS_E_FAILURE; |
| goto resp; |
| } |
| |
| WMA_LOGD("Disable Sta Mode Ps vdevId %d", vdev_id); |
| /* Disable Sta Mode Power save */ |
| ret = wmi_unified_set_sta_ps(wma->wmi_handle, vdev_id, false); |
| if(ret) { |
| WMA_LOGE("Disable Sta Mode Ps Failed vdevId %d", vdev_id); |
| ps_req->status = VOS_STATUS_E_FAILURE; |
| goto resp; |
| } |
| |
| /* Disable UAPSD incase if additional Req came */ |
| if (eSIR_ADDON_DISABLE_UAPSD == ps_req->psSetting) { |
| WMA_LOGD("Disable Uapsd vdevId %d", vdev_id); |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, vdev_id, |
| WMI_STA_PS_PARAM_UAPSD, 0); |
| if (ret) { |
| WMA_LOGE("Disable Uapsd Failed vdevId %d", vdev_id); |
| /* |
| * Even this fails we can proceed as success |
| * since we disabled powersave |
| */ |
| } |
| } |
| |
| ps_req->status = VOS_STATUS_SUCCESS; |
| iface->in_bmps = false; |
| resp: |
| wma_send_msg(wma, WDA_EXIT_BMPS_RSP, ps_req, 0); |
| } |
| |
| static void wma_enable_uapsd_mode(tp_wma_handle wma, |
| tpEnableUapsdParams ps_req) |
| { |
| int32_t ret; |
| u_int32_t vdev_id = ps_req->sessionid; |
| u_int32_t uapsd_val = 0; |
| enum powersave_qpower_mode qpower_config = wma_get_qpower_config(wma); |
| |
| /* Disable Sta Mode Power save */ |
| ret = wmi_unified_set_sta_ps(wma->wmi_handle, vdev_id, false); |
| if (ret) { |
| WMA_LOGE("Disable Sta Mode Ps Failed vdevId %d", vdev_id); |
| ps_req->status = VOS_STATUS_E_FAILURE; |
| goto resp; |
| } |
| |
| uapsd_val = wma_get_uapsd_mask(&ps_req->uapsdParams); |
| |
| WMA_LOGD("Enable Uapsd vdevId %d Mask %d", vdev_id, uapsd_val); |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, vdev_id, |
| WMI_STA_PS_PARAM_UAPSD, uapsd_val); |
| if (ret) { |
| WMA_LOGE("Enable Uapsd Failed vdevId %d", vdev_id); |
| ps_req->status = VOS_STATUS_E_FAILURE; |
| goto resp; |
| } |
| |
| WMA_LOGD("Enable Forced Sleep vdevId %d", vdev_id); |
| |
| ret = wma_set_force_sleep(wma, vdev_id, true, |
| qpower_config); |
| if (ret) { |
| WMA_LOGE("Enable Forced Sleep Failed vdevId %d", vdev_id); |
| ps_req->status = VOS_STATUS_E_FAILURE; |
| goto resp; |
| } |
| |
| ps_req->status = VOS_STATUS_SUCCESS; |
| resp: |
| wma_send_msg(wma, WDA_ENTER_UAPSD_RSP, ps_req, 0); |
| } |
| |
| static void wma_disable_uapsd_mode(tp_wma_handle wma, |
| tpDisableUapsdParams ps_req) |
| { |
| int32_t ret; |
| u_int32_t vdev_id = ps_req->sessionid; |
| enum powersave_qpower_mode qpower_config = wma_get_qpower_config(wma); |
| |
| WMA_LOGD("Disable Uapsd vdevId %d", vdev_id); |
| |
| /* Disable Sta Mode Power save */ |
| ret = wmi_unified_set_sta_ps(wma->wmi_handle, vdev_id, false); |
| if (ret) { |
| WMA_LOGE("Disable Sta Mode Ps Failed vdevId %d", vdev_id); |
| ps_req->status = VOS_STATUS_E_FAILURE; |
| goto resp; |
| } |
| |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, vdev_id, |
| WMI_STA_PS_PARAM_UAPSD, 0); |
| if (ret) { |
| WMA_LOGE("Disable Uapsd Failed vdevId %d", vdev_id); |
| ps_req->status = VOS_STATUS_E_FAILURE; |
| goto resp; |
| } |
| |
| /* Re enable Sta Mode Powersave with proper configuration */ |
| ret = wma_set_force_sleep(wma, vdev_id, false, |
| qpower_config); |
| if (ret) { |
| WMA_LOGE("Disable Forced Sleep Failed vdevId %d", vdev_id); |
| ps_req->status = VOS_STATUS_E_FAILURE; |
| goto resp; |
| } |
| |
| ps_req->status = VOS_STATUS_SUCCESS; |
| resp: |
| wma_send_msg(wma, WDA_EXIT_UAPSD_RSP, ps_req, 0); |
| } |
| |
| static void wma_set_keepalive_req(tp_wma_handle wma, |
| tSirKeepAliveReq *keepalive) |
| { |
| WMA_LOGD("KEEPALIVE:PacketType:%d", keepalive->packetType); |
| wma_set_sta_keep_alive(wma, keepalive->sessionId, |
| keepalive->packetType, |
| keepalive->timePeriod, |
| keepalive->hostIpv4Addr, |
| keepalive->destIpv4Addr, |
| keepalive->destMacAddr); |
| |
| vos_mem_free(keepalive); |
| } |
| /* |
| * This function sets the trigger uapsd |
| * params such as service interval, delay |
| * interval and suspend interval which |
| * will be used by the firmware to send |
| * trigger frames periodically when there |
| * is no traffic on the transmit side. |
| */ |
| int32_t |
| wmi_unified_set_sta_uapsd_auto_trig_cmd( |
| wmi_unified_t wmi_handle, |
| u_int32_t vdevid, |
| u_int8_t peer_addr[IEEE80211_ADDR_LEN], |
| u_int8_t *autoTriggerparam, |
| u_int32_t num_ac) |
| { |
| wmi_sta_uapsd_auto_trig_cmd_fixed_param *cmd; |
| int32_t ret; |
| u_int32_t param_len = num_ac * |
| sizeof(wmi_sta_uapsd_auto_trig_param); |
| u_int32_t cmd_len = sizeof(*cmd) + param_len + WMI_TLV_HDR_SIZE; |
| u_int32_t i; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| |
| buf = wmi_buf_alloc(wmi_handle, cmd_len); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_sta_uapsd_auto_trig_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_sta_uapsd_auto_trig_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_sta_uapsd_auto_trig_cmd_fixed_param)); |
| cmd->vdev_id = vdevid; |
| cmd->num_ac = num_ac; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(peer_addr, &cmd->peer_macaddr); |
| |
| /* TLV indicating array of structures to follow */ |
| buf_ptr += sizeof(*cmd); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, param_len); |
| |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| vos_mem_copy(buf_ptr, autoTriggerparam, param_len); |
| |
| /* |
| * Update tag and length for uapsd auto trigger params (this will take |
| * care of updating tag and length if it is not pre-filled by caller). |
| */ |
| for (i = 0; i < num_ac; i++) { |
| WMITLV_SET_HDR((buf_ptr + |
| (i * sizeof(wmi_sta_uapsd_auto_trig_param))), |
| WMITLV_TAG_STRUC_wmi_sta_uapsd_auto_trig_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_sta_uapsd_auto_trig_param)); |
| } |
| |
| ret = wmi_unified_cmd_send(wmi_handle, buf, cmd_len, |
| WMI_STA_UAPSD_AUTO_TRIG_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE("Failed to send set uapsd param ret = %d", ret); |
| wmi_buf_free(buf); |
| } |
| return ret; |
| } |
| |
| /* |
| * This function sets the trigger uapsd |
| * params such as service interval, delay |
| * interval and suspend interval which |
| * will be used by the firmware to send |
| * trigger frames periodically when there |
| * is no traffic on the transmit side. |
| */ |
| VOS_STATUS wma_trigger_uapsd_params(tp_wma_handle wma_handle, u_int32_t vdev_id, |
| tp_wma_trigger_uapsd_params trigger_uapsd_params) |
| { |
| int32_t ret; |
| wmi_sta_uapsd_auto_trig_param uapsd_trigger_param; |
| |
| WMA_LOGD("Trigger uapsd params vdev id %d", vdev_id); |
| |
| WMA_LOGD("WMM AC %d User Priority %d SvcIntv %d DelIntv %d SusIntv %d", |
| trigger_uapsd_params->wmm_ac, |
| trigger_uapsd_params->user_priority, |
| trigger_uapsd_params->service_interval, |
| trigger_uapsd_params->delay_interval, |
| trigger_uapsd_params->suspend_interval); |
| |
| if (!WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_STA_UAPSD_BASIC_AUTO_TRIG) || |
| !WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_STA_UAPSD_VAR_AUTO_TRIG)) { |
| WMA_LOGD("Trigger uapsd is not supported vdev id %d", vdev_id); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| uapsd_trigger_param.wmm_ac = |
| trigger_uapsd_params->wmm_ac; |
| uapsd_trigger_param.user_priority = |
| trigger_uapsd_params->user_priority; |
| uapsd_trigger_param.service_interval = |
| trigger_uapsd_params->service_interval; |
| uapsd_trigger_param.suspend_interval = |
| trigger_uapsd_params->suspend_interval; |
| uapsd_trigger_param.delay_interval = |
| trigger_uapsd_params->delay_interval; |
| |
| ret = wmi_unified_set_sta_uapsd_auto_trig_cmd(wma_handle->wmi_handle, vdev_id, |
| wma_handle->interfaces[vdev_id].bssid, |
| (u_int8_t*)(&uapsd_trigger_param), |
| 1); |
| if (ret) { |
| WMA_LOGE("Fail to send uapsd param cmd for vdevid %d ret = %d", |
| ret, vdev_id); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| VOS_STATUS wma_disable_uapsd_per_ac(tp_wma_handle wma_handle, |
| u_int32_t vdev_id, |
| enum uapsd_ac ac) |
| { |
| int32_t ret; |
| struct wma_txrx_node *iface = &wma_handle->interfaces[vdev_id]; |
| wmi_sta_uapsd_auto_trig_param uapsd_trigger_param; |
| enum uapsd_up user_priority; |
| |
| WMA_LOGD("Disable Uapsd per ac vdevId %d ac %d", vdev_id, ac); |
| |
| switch (ac) { |
| case UAPSD_VO: |
| iface->uapsd_cached_val &= |
| ~(WMI_STA_PS_UAPSD_AC3_DELIVERY_EN | |
| WMI_STA_PS_UAPSD_AC3_TRIGGER_EN); |
| user_priority = UAPSD_UP_VO; |
| break; |
| case UAPSD_VI: |
| iface->uapsd_cached_val &= |
| ~(WMI_STA_PS_UAPSD_AC2_DELIVERY_EN | |
| WMI_STA_PS_UAPSD_AC2_TRIGGER_EN); |
| user_priority = UAPSD_UP_VI; |
| break; |
| case UAPSD_BK: |
| iface->uapsd_cached_val &= |
| ~(WMI_STA_PS_UAPSD_AC1_DELIVERY_EN | |
| WMI_STA_PS_UAPSD_AC1_TRIGGER_EN); |
| user_priority = UAPSD_UP_BK; |
| break; |
| case UAPSD_BE: |
| iface->uapsd_cached_val &= |
| ~(WMI_STA_PS_UAPSD_AC0_DELIVERY_EN | |
| WMI_STA_PS_UAPSD_AC0_TRIGGER_EN); |
| user_priority = UAPSD_UP_BE; |
| break; |
| default: |
| WMA_LOGE("Invalid AC vdevId %d ac %d", vdev_id, ac); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| /* |
| * Disable Auto Trigger Functionality before |
| * disabling uapsd for a particular AC |
| */ |
| uapsd_trigger_param.wmm_ac = ac; |
| uapsd_trigger_param.user_priority = user_priority; |
| uapsd_trigger_param.service_interval = 0; |
| uapsd_trigger_param.suspend_interval = 0; |
| uapsd_trigger_param.delay_interval = 0; |
| |
| ret = wmi_unified_set_sta_uapsd_auto_trig_cmd(wma_handle->wmi_handle, |
| vdev_id, |
| wma_handle->interfaces[vdev_id].bssid, |
| (u_int8_t*)(&uapsd_trigger_param), |
| 1); |
| if (ret) { |
| WMA_LOGE("Fail to send auto trig cmd for vdevid %d ret = %d", |
| ret, vdev_id); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ret = wmi_unified_set_sta_ps_param(wma_handle->wmi_handle, vdev_id, |
| WMI_STA_PS_PARAM_UAPSD, iface->uapsd_cached_val); |
| if (ret) { |
| WMA_LOGE("Disable Uapsd per ac Failed vdevId %d ac %d", vdev_id, ac); |
| return VOS_STATUS_E_FAILURE; |
| } |
| WMA_LOGD("Disable Uapsd per ac vdevId %d val %d", vdev_id, |
| iface->uapsd_cached_val); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| |
| /* Request FW to start PNO operation */ |
| static VOS_STATUS wma_pno_start(tp_wma_handle wma, tpSirPNOScanReq pno) |
| { |
| wmi_nlo_config_cmd_fixed_param *cmd; |
| nlo_configured_parameters *nlo_list; |
| u_int32_t *channel_list; |
| int32_t len; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| u_int8_t i; |
| int ret; |
| wmi_vendor_oui *voui = NULL; |
| struct vendor_oui *pvoui = NULL; |
| connected_nlo_rssi_params *nlo_relative_rssi; |
| connected_nlo_bss_band_rssi_pref *nlo_band_rssi; |
| |
| WMA_LOGD("PNO Start"); |
| |
| len = sizeof(*cmd) + |
| WMI_TLV_HDR_SIZE + /* TLV place holder for array of structures nlo_configured_parameters(nlo_list) */ |
| WMI_TLV_HDR_SIZE + /* TLV place holder for array of uint32 channel_list */ |
| WMI_TLV_HDR_SIZE + /* TLV of nlo_channel_prediction_cfg */ |
| WMI_TLV_HDR_SIZE + /* array of wmi_vendor_oui */ |
| WMI_TLV_HDR_SIZE; /* array of connected_nlo_bss_band_rssi_pref */ |
| |
| len += sizeof(u_int32_t) * MIN(pno->aNetworks[0].ucChannelCount, |
| WMI_NLO_MAX_CHAN); |
| len += sizeof(nlo_configured_parameters) * |
| MIN(pno->ucNetworksCount, WMI_NLO_MAX_SSIDS); |
| /* Add the fixed length of enlo_candidate_score_params */ |
| len += sizeof(enlo_candidate_score_params); |
| len += sizeof(wmi_vendor_oui) * pno->num_vendor_oui; |
| len += sizeof(connected_nlo_rssi_params); |
| len += sizeof(connected_nlo_bss_band_rssi_pref); |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (wmi_nlo_config_cmd_fixed_param *) wmi_buf_data(buf); |
| |
| buf_ptr = (u_int8_t *) cmd; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_nlo_config_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_nlo_config_cmd_fixed_param)); |
| cmd->vdev_id = pno->sessionId; |
| cmd->flags = WMI_NLO_CONFIG_START | WMI_NLO_CONFIG_SSID_HIDE_EN; |
| |
| /* Current FW does not support min-max range for dwell time */ |
| cmd->active_dwell_time = pno->active_max_time; |
| cmd->passive_dwell_time = pno->passive_max_time; |
| |
| if (pno->do_passive_scan) |
| cmd->flags |= WMI_NLO_CONFIG_SCAN_PASSIVE; |
| /* Copy scan interval */ |
| cmd->fast_scan_period = pno->fast_scan_period; |
| cmd->slow_scan_period = pno->slow_scan_period; |
| cmd->fast_scan_max_cycles = pno->fast_scan_max_cycles; |
| WMA_LOGD("fast_scan_period: %d msec slow_scan_period: %d msec", |
| cmd->fast_scan_period, cmd->slow_scan_period); |
| WMA_LOGD("fast_scan_max_cycles: %d", cmd->fast_scan_max_cycles); |
| |
| if (pno->enable_pno_scan_randomization) { |
| cmd->flags |= WMI_NLO_CONFIG_SPOOFED_MAC_IN_PROBE_REQ | |
| WMI_NLO_CONFIG_RANDOM_SEQ_NO_IN_PROBE_REQ; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(pno->mac_addr, &cmd->mac_addr); |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(pno->mac_addr_mask, &cmd->mac_mask); |
| } |
| |
| if (pno->ie_whitelist) |
| cmd->flags |= WMI_NLO_CONFIG_ENABLE_IE_WHITELIST_IN_PROBE_REQ; |
| if(pno->relative_rssi_set) |
| cmd->flags |= WMI_NLO_CONFIG_ENABLE_CNLO_RSSI_CONFIG; |
| |
| WMA_LOGI("pno flags = %x", cmd->flags); |
| |
| cmd->num_vendor_oui = pno->num_vendor_oui; |
| |
| if (pno->ie_whitelist) { |
| for (i = 0; i < PROBE_REQ_BITMAP_LEN; i++) |
| cmd->ie_bitmap[i] = pno->probe_req_ie_bitmap[i]; |
| } |
| |
| buf_ptr += sizeof(wmi_nlo_config_cmd_fixed_param); |
| |
| cmd->no_of_ssids = MIN(pno->ucNetworksCount, WMI_NLO_MAX_SSIDS); |
| WMA_LOGD("SSID count : %d", cmd->no_of_ssids); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| cmd->no_of_ssids * sizeof(nlo_configured_parameters)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| nlo_list = (nlo_configured_parameters *) buf_ptr; |
| for (i = 0; i < cmd->no_of_ssids; i++) { |
| WMITLV_SET_HDR(&nlo_list[i].tlv_header, |
| WMITLV_TAG_ARRAY_BYTE, |
| WMITLV_GET_STRUCT_TLVLEN(nlo_configured_parameters)); |
| /* Copy ssid and it's length */ |
| nlo_list[i].ssid.valid = TRUE; |
| nlo_list[i].ssid.ssid.ssid_len = pno->aNetworks[i].ssId.length; |
| vos_mem_copy(nlo_list[i].ssid.ssid.ssid, |
| pno->aNetworks[i].ssId.ssId, |
| nlo_list[i].ssid.ssid.ssid_len); |
| WMA_LOGD("index: %d ssid: %.*s len: %d", i, |
| nlo_list[i].ssid.ssid.ssid_len, |
| (char *) nlo_list[i].ssid.ssid.ssid, |
| nlo_list[i].ssid.ssid.ssid_len); |
| |
| /* Copy rssi threshold */ |
| if (pno->aNetworks[i].rssiThreshold && |
| pno->aNetworks[i].rssiThreshold > WMA_RSSI_THOLD_DEFAULT) { |
| nlo_list[i].rssi_cond.valid = TRUE; |
| nlo_list[i].rssi_cond.rssi = |
| pno->aNetworks[i].rssiThreshold; |
| WMA_LOGD("RSSI threshold : %d dBm", |
| nlo_list[i].rssi_cond.rssi); |
| } |
| nlo_list[i].bcast_nw_type.valid = TRUE; |
| nlo_list[i].bcast_nw_type.bcast_nw_type = |
| pno->aNetworks[i].bcastNetwType; |
| WMA_LOGI("Broadcast NW type (%u)", |
| nlo_list[i].bcast_nw_type.bcast_nw_type); |
| } |
| buf_ptr += cmd->no_of_ssids * sizeof(nlo_configured_parameters); |
| |
| /* Copy channel info */ |
| cmd->num_of_channels = MIN(pno->aNetworks[0].ucChannelCount, |
| WMI_NLO_MAX_CHAN); |
| WMA_LOGD("Channel count: %d", cmd->num_of_channels); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_UINT32, |
| (cmd->num_of_channels * sizeof(u_int32_t))); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| channel_list = (u_int32_t *) buf_ptr; |
| for (i = 0; i < cmd->num_of_channels; i++) { |
| channel_list[i] = pno->aNetworks[0].aChannels[i]; |
| |
| if (channel_list[i] < WMA_NLO_FREQ_THRESH) |
| channel_list[i] = vos_chan_to_freq(channel_list[i]); |
| |
| WMA_LOGD("Ch[%d]: %d MHz", i, channel_list[i]); |
| } |
| buf_ptr += cmd->num_of_channels * sizeof(u_int32_t); |
| |
| /* |
| * For pno start, this is not needed but to get the correct offset of |
| * wmi_vendor_oui, this is needed |
| */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, 0); |
| buf_ptr += WMI_TLV_HDR_SIZE; /* zero no.of nlo_channel_prediction_cfg */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_STRUC_enlo_candidate_score_param, |
| WMITLV_GET_STRUCT_TLVLEN(enlo_candidate_score_params)); |
| buf_ptr += sizeof(enlo_candidate_score_params); |
| |
| /* ie white list */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| pno->num_vendor_oui * |
| sizeof(wmi_vendor_oui)); |
| |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| if (cmd->num_vendor_oui != 0) { |
| voui = (wmi_vendor_oui *)buf_ptr; |
| pvoui = (struct vendor_oui *)((uint8_t *)pno + sizeof(*pno)); |
| for (i = 0; i < cmd->num_vendor_oui; i++) { |
| WMITLV_SET_HDR(&voui[i].tlv_header, |
| WMITLV_TAG_STRUC_wmi_vendor_oui, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vendor_oui)); |
| voui[i].oui_type_subtype = pvoui[i].oui_type | |
| (pvoui[i].oui_subtype << 24); |
| } |
| buf_ptr += cmd->num_vendor_oui * sizeof(wmi_vendor_oui); |
| } |
| |
| /* |
| * Firmware calculation using connected PNO params: |
| * New AP's RSSI >= (Connected AP's RSSI + relative_rssi +/- rssi_pref) |
| * deduction of rssi_pref for chosen band_pref and |
| * addition of rssi_pref for remaining bands (other than chosen band). |
| */ |
| nlo_relative_rssi = (connected_nlo_rssi_params *) buf_ptr; |
| WMITLV_SET_HDR(&nlo_relative_rssi->tlv_header, |
| WMITLV_TAG_STRUC_wmi_connected_nlo_rssi_params, |
| WMITLV_GET_STRUCT_TLVLEN(connected_nlo_rssi_params)); |
| nlo_relative_rssi->relative_rssi = pno->relative_rssi; |
| WMA_LOGD("relative_rssi %d", nlo_relative_rssi->relative_rssi); |
| buf_ptr += sizeof(*nlo_relative_rssi); |
| |
| /* |
| * As of now Kernel and Host supports one band and rssi preference. |
| * Firmware supports array of band and rssi preferences |
| */ |
| cmd->num_cnlo_band_pref = 1; |
| WMITLV_SET_HDR(buf_ptr, |
| WMITLV_TAG_ARRAY_STRUC, |
| cmd->num_cnlo_band_pref * |
| sizeof(connected_nlo_bss_band_rssi_pref)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| nlo_band_rssi = (connected_nlo_bss_band_rssi_pref *) buf_ptr; |
| for (i = 0; i < cmd->num_cnlo_band_pref; i++) { |
| WMITLV_SET_HDR(&nlo_band_rssi[i].tlv_header, |
| WMITLV_TAG_STRUC_wmi_connected_nlo_bss_band_rssi_pref, |
| WMITLV_GET_STRUCT_TLVLEN( |
| connected_nlo_bss_band_rssi_pref)); |
| nlo_band_rssi[i].band = pno->band_rssi_pref.band; |
| nlo_band_rssi[i].rssi_pref = pno->band_rssi_pref.rssi; |
| WMA_LOGD("band_pref %d, rssi_pref %d", |
| nlo_band_rssi[i].band, |
| nlo_band_rssi[i].rssi_pref); |
| } |
| buf_ptr += cmd->num_cnlo_band_pref * sizeof(*nlo_band_rssi); |
| |
| /* TODO: Discrete firmware doesn't have command/option to configure |
| * App IE which comes from wpa_supplicant as of part PNO start request. |
| */ |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send nlo wmi cmd", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| wma->interfaces[pno->sessionId].pno_in_progress = TRUE; |
| |
| WMA_LOGD("PNO start request sent successfully for vdev %d", |
| pno->sessionId); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* Request FW to stop ongoing PNO operation */ |
| static VOS_STATUS wma_pno_stop(tp_wma_handle wma, u_int8_t vdev_id) |
| { |
| wmi_nlo_config_cmd_fixed_param *cmd; |
| int32_t len = sizeof(*cmd); |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| int ret; |
| |
| if (!wma->interfaces[vdev_id].pno_in_progress) { |
| WMA_LOGD("No active pno session found for vdev %d, skip pno stop request", |
| vdev_id); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| WMA_LOGD("PNO Stop"); |
| |
| len += WMI_TLV_HDR_SIZE + /* TLV place holder for array of structures nlo_configured_parameters(nlo_list) */ |
| WMI_TLV_HDR_SIZE; /* TLV place holder for array of uint32 channel_list */ |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (wmi_nlo_config_cmd_fixed_param *) wmi_buf_data(buf); |
| buf_ptr = (u_int8_t *) cmd; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_nlo_config_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_nlo_config_cmd_fixed_param)); |
| |
| cmd->vdev_id = vdev_id; |
| cmd->flags = WMI_NLO_CONFIG_STOP; |
| buf_ptr += sizeof(*cmd); |
| |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, 0); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_UINT32, 0); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send nlo wmi cmd", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| wma->interfaces[vdev_id].pno_in_progress = FALSE; |
| |
| WMA_LOGD("PNO stop request sent successfully for vdev %d", |
| vdev_id); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static void wma_config_pno(tp_wma_handle wma, tpSirPNOScanReq pno) |
| { |
| VOS_STATUS ret; |
| |
| if (pno->enable) |
| ret = wma_pno_start(wma, pno); |
| else |
| ret = wma_pno_stop(wma, pno->sessionId); |
| |
| if (ret) |
| WMA_LOGE("%s: PNO %s failed %d", __func__, |
| pno->enable ? "start" : "stop", ret); |
| |
| /* SME expects WMA to free tpSirPNOScanReq memory after |
| * processing PNO request. */ |
| vos_mem_free(pno); |
| } |
| |
| #if defined(FEATURE_WLAN_ESE) && defined(FEATURE_WLAN_ESE_UPLOAD) |
| static VOS_STATUS wma_plm_start(tp_wma_handle wma, const tpSirPlmReq plm) |
| { |
| wmi_vdev_plmreq_start_cmd_fixed_param *cmd; |
| u_int32_t *channel_list; |
| int32_t len; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| u_int8_t count; |
| int ret; |
| |
| if (NULL == plm || NULL == wma) { |
| WMA_LOGE("%s: input pointer is NULL ", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| WMA_LOGD("PLM Start"); |
| |
| len = sizeof(*cmd) + |
| WMI_TLV_HDR_SIZE; /* TLV place holder for channel_list */ |
| len += sizeof(u_int32_t) * plm->plmNumCh; |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| cmd = (wmi_vdev_plmreq_start_cmd_fixed_param *) wmi_buf_data(buf); |
| |
| buf_ptr = (u_int8_t *) cmd; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_plmreq_start_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vdev_plmreq_start_cmd_fixed_param)); |
| |
| cmd->vdev_id = plm->sessionId; |
| |
| cmd->meas_token = plm->meas_token; |
| cmd->dialog_token = plm->diag_token; |
| cmd->number_bursts = plm->numBursts; |
| cmd->burst_interval = WMA_SEC_TO_MSEC(plm->burstInt); |
| cmd->off_duration = plm->measDuration; |
| cmd->burst_cycle = plm->burstLen; |
| cmd->tx_power = plm->desiredTxPwr; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(plm->macAddr, &cmd->dest_mac); |
| cmd->num_chans = plm->plmNumCh; |
| |
| buf_ptr += sizeof(wmi_vdev_plmreq_start_cmd_fixed_param); |
| |
| WMA_LOGD("vdev : %d measu token : %d", cmd->vdev_id, cmd->meas_token); |
| WMA_LOGD("dialog_token: %d", cmd->dialog_token); |
| WMA_LOGD("number_bursts: %d", cmd->number_bursts); |
| WMA_LOGD("burst_interval: %d", cmd->burst_interval); |
| WMA_LOGD("off_duration: %d", cmd->off_duration); |
| WMA_LOGD("burst_cycle: %d", cmd->burst_cycle); |
| WMA_LOGD("tx_power: %d", cmd->tx_power); |
| WMA_LOGD("Number of channels : %d", cmd->num_chans); |
| |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_UINT32, |
| (cmd->num_chans * sizeof(u_int32_t))); |
| |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| if (cmd->num_chans) |
| { |
| channel_list = (u_int32_t *) buf_ptr; |
| for (count = 0; count < cmd->num_chans; count++) { |
| channel_list[count] = plm->plmChList[count]; |
| if (channel_list[count] < WMA_NLO_FREQ_THRESH) |
| channel_list[count] = |
| vos_chan_to_freq(channel_list[count]); |
| WMA_LOGD("Ch[%d]: %d MHz", count, channel_list[count]); |
| } |
| buf_ptr += cmd->num_chans * sizeof(u_int32_t); |
| } |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_VDEV_PLMREQ_START_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send plm start wmi cmd", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| wma->interfaces[plm->sessionId].plm_in_progress = TRUE; |
| |
| WMA_LOGD("Plm start request sent successfully for vdev %d", |
| plm->sessionId); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static VOS_STATUS wma_plm_stop(tp_wma_handle wma, const tpSirPlmReq plm) |
| { |
| wmi_vdev_plmreq_stop_cmd_fixed_param *cmd; |
| int32_t len; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| int ret; |
| |
| if (NULL == plm || NULL == wma) { |
| WMA_LOGE("%s: input pointer is NULL ", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| if (FALSE == wma->interfaces[plm->sessionId].plm_in_progress) { |
| WMA_LOGE("No active plm req found, skip plm stop req" ); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("PLM Stop"); |
| |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (wmi_vdev_plmreq_stop_cmd_fixed_param *) wmi_buf_data(buf); |
| |
| buf_ptr = (u_int8_t *) cmd; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_plmreq_stop_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vdev_plmreq_stop_cmd_fixed_param)); |
| |
| cmd->vdev_id = plm->sessionId; |
| |
| cmd->meas_token = plm->meas_token; |
| WMA_LOGD("vdev %d meas token %d", cmd->vdev_id, cmd->meas_token); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_VDEV_PLMREQ_STOP_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send plm stop wmi cmd", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| wma->interfaces[plm->sessionId].plm_in_progress = FALSE; |
| |
| WMA_LOGD("Plm stop request sent successfully for vdev %d", |
| plm->sessionId); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| static void wma_config_plm(tp_wma_handle wma, tpSirPlmReq plm) |
| { |
| VOS_STATUS ret = 0; |
| |
| if (NULL == plm || NULL == wma) |
| return; |
| |
| if (plm->enable) |
| ret = wma_plm_start(wma, plm); |
| else |
| ret = wma_plm_stop(wma, plm); |
| |
| if (ret) |
| WMA_LOGE("%s: PLM %s failed %d", __func__, |
| plm->enable ? "start" : "stop", ret); |
| |
| /* SME expects WMA to free tpSirPlmReq memory after |
| * processing PLM request. */ |
| vos_mem_free(plm); |
| plm = NULL; |
| } |
| #endif |
| |
| /* |
| * After pushing cached scan results (that are stored in LIM) to SME, |
| * PE will post WDA_SME_SCAN_CACHE_UPDATED message indication to |
| * wma and intern this function handles that message. This function will |
| * check for PNO completion (by checking NLO match event) and post PNO |
| * completion back to SME if PNO operation is completed successfully. |
| */ |
| void wma_scan_cache_updated_ind(tp_wma_handle wma, u_int8_t sessionId) |
| { |
| tSirPrefNetworkFoundInd *nw_found_ind; |
| VOS_STATUS status; |
| vos_msg_t vos_msg; |
| u_int8_t len, i; |
| |
| for (i = 0; i < wma->max_bssid; i++) { |
| if (wma->interfaces[i].nlo_match_evt_received) |
| break; |
| } |
| |
| if (i == wma->max_bssid) { |
| WMA_LOGD("PNO match event is not received in any vdev, skip scan cache update indication"); |
| return; |
| } |
| wma->interfaces[i].nlo_match_evt_received = FALSE; |
| |
| WMA_LOGD("Posting PNO completion to umac"); |
| |
| len = sizeof(tSirPrefNetworkFoundInd); |
| nw_found_ind = (tSirPrefNetworkFoundInd *) vos_mem_malloc(len); |
| |
| if (NULL == nw_found_ind) { |
| WMA_LOGE("%s: Memory allocation failure", __func__); |
| return; |
| } |
| |
| nw_found_ind->mesgType = eWNI_SME_PREF_NETWORK_FOUND_IND; |
| nw_found_ind->mesgLen = len; |
| nw_found_ind->sessionId = sessionId; |
| |
| vos_msg.type = eWNI_SME_PREF_NETWORK_FOUND_IND; |
| vos_msg.bodyptr = (void *) nw_found_ind; |
| vos_msg.bodyval = 0; |
| |
| status = vos_mq_post_message(VOS_MQ_ID_SME, &vos_msg); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s: Failed to post PNO completion match event to SME", |
| __func__); |
| vos_mem_free(nw_found_ind); |
| } |
| } |
| |
| #endif |
| |
| static void wma_send_status_to_suspend_ind(tp_wma_handle wma, boolean suspended, |
| bool runtime_pm) |
| { |
| tSirReadyToSuspendInd *ready_to_suspend; |
| VOS_STATUS status; |
| vos_msg_t vos_msg; |
| u_int8_t len; |
| |
| if (runtime_pm) { |
| WMA_LOGD("Runtime PM: Posting ready to suspend indication"); |
| vos_event_set(&wma->runtime_suspend); |
| return; |
| } |
| |
| WMA_LOGD("Posting ready to suspend indication to umac"); |
| |
| len = sizeof(tSirReadyToSuspendInd); |
| ready_to_suspend = (tSirReadyToSuspendInd *) vos_mem_malloc(len); |
| |
| if (NULL == ready_to_suspend) { |
| WMA_LOGE("%s: Memory allocation failure", __func__); |
| return; |
| } |
| |
| ready_to_suspend->mesgType = eWNI_SME_READY_TO_SUSPEND_IND; |
| ready_to_suspend->mesgLen = len; |
| ready_to_suspend->suspended = suspended; |
| |
| vos_msg.type = eWNI_SME_READY_TO_SUSPEND_IND; |
| vos_msg.bodyptr = (void *) ready_to_suspend; |
| vos_msg.bodyval = 0; |
| |
| status = vos_mq_post_message(VOS_MQ_ID_SME, &vos_msg); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to post ready to suspend"); |
| vos_mem_free(ready_to_suspend); |
| } |
| } |
| |
| /* Frees memory associated to given pattern ID in wow pattern cache. */ |
| static inline void wma_free_wow_ptrn(tp_wma_handle wma, u_int8_t ptrn_id) |
| { |
| if (wma->wow.no_of_ptrn_cached <= 0 || |
| !wma->wow.cache[ptrn_id]) |
| return; |
| |
| WMA_LOGD("Deleting wow pattern %d from cache which belongs to vdev id %d", |
| ptrn_id, wma->wow.cache[ptrn_id]->vdev_id); |
| |
| vos_mem_free(wma->wow.cache[ptrn_id]->ptrn); |
| vos_mem_free(wma->wow.cache[ptrn_id]->mask); |
| vos_mem_free(wma->wow.cache[ptrn_id]); |
| wma->wow.cache[ptrn_id] = NULL; |
| |
| wma->wow.no_of_ptrn_cached--; |
| } |
| |
| /* Converts wow wakeup reason code to text format */ |
| static const u8 *wma_wow_wake_reason_str(A_INT32 wake_reason, tp_wma_handle wma) |
| { |
| switch (wake_reason) { |
| case WOW_REASON_UNSPECIFIED: |
| if (!wmi_get_runtime_pm_inprogress(wma->wmi_handle)) |
| return "UNSPECIFIED"; |
| else |
| return "RUNTIME PM resume"; |
| case WOW_REASON_NLOD: |
| return "NLOD"; |
| case WOW_REASON_AP_ASSOC_LOST: |
| return "AP_ASSOC_LOST"; |
| case WOW_REASON_LOW_RSSI: |
| return "LOW_RSSI"; |
| case WOW_REASON_DEAUTH_RECVD: |
| return "DEAUTH_RECVD"; |
| case WOW_REASON_DISASSOC_RECVD: |
| return "DISASSOC_RECVD"; |
| case WOW_REASON_GTK_HS_ERR: |
| return "GTK_HS_ERR"; |
| case WOW_REASON_EAP_REQ: |
| return "EAP_REQ"; |
| case WOW_REASON_FOURWAY_HS_RECV: |
| return "FOURWAY_HS_RECV"; |
| case WOW_REASON_TIMER_INTR_RECV: |
| return "TIMER_INTR_RECV"; |
| case WOW_REASON_PATTERN_MATCH_FOUND: |
| return "PATTERN_MATCH_FOUND"; |
| case WOW_REASON_RECV_MAGIC_PATTERN: |
| return "RECV_MAGIC_PATTERN"; |
| case WOW_REASON_P2P_DISC: |
| return "P2P_DISC"; |
| #ifdef FEATURE_WLAN_LPHB |
| case WOW_REASON_WLAN_HB: |
| return "WLAN_HB"; |
| #endif /* FEATURE_WLAN_LPHB */ |
| |
| case WOW_REASON_CSA_EVENT: |
| return "CSA_EVENT"; |
| case WOW_REASON_PROBE_REQ_WPS_IE_RECV: |
| return "PROBE_REQ_RECV"; |
| case WOW_REASON_AUTH_REQ_RECV: |
| return "AUTH_REQ_RECV"; |
| case WOW_REASON_ASSOC_REQ_RECV: |
| return "ASSOC_REQ_RECV"; |
| case WOW_REASON_HTT_EVENT: |
| return "WOW_REASON_HTT_EVENT"; |
| #ifdef FEATURE_WLAN_RA_FILTERING |
| case WOW_REASON_RA_MATCH: |
| return "WOW_REASON_RA_MATCH"; |
| #endif |
| case WOW_REASON_BEACON_RECV: |
| return "WOW_REASON_IBSS_BEACON_RECV"; |
| #ifdef FEATURE_WLAN_AUTO_SHUTDOWN |
| case WOW_REASON_HOST_AUTO_SHUTDOWN: |
| return "WOW_REASON_HOST_AUTO_SHUTDOWN"; |
| #endif |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| case WOW_REASON_ROAM_HO: |
| return "WOW_REASON_ROAM_HO"; |
| #endif |
| case WOW_REASON_CLIENT_KICKOUT_EVENT: |
| return "WOW_REASON_CLIENT_KICKOUT_EVENT"; |
| |
| #ifdef FEATURE_WLAN_EXTSCAN |
| case WOW_REASON_EXTSCAN: |
| return "WOW_REASON_EXTSCAN"; |
| #endif |
| case WOW_REASON_RSSI_BREACH_EVENT: |
| return "WOW_REASON_RSSI_BREACH_EVENT"; |
| |
| case WOW_REASON_CHIP_POWER_FAILURE_DETECT: |
| return "WOW_REASON_CHIP_POWER_FAILURE_DETECT"; |
| |
| case WOW_REASON_NLO_SCAN_COMPLETE: |
| return "WOW_REASON_NLO_SCAN_COMPLETE"; |
| case WOW_REASON_BPF_ALLOW: |
| return "WOW_REASON_BPF_ALLOW"; |
| case WOW_REASON_NAN_EVENT: |
| return "WOW_REASON_NAN_EVENT"; |
| case WOW_REASON_ASSOC_RES_RECV: |
| return "ASSOC_RES_RECV"; |
| case WOW_REASON_REASSOC_REQ_RECV: |
| return "REASSOC_REQ_RECV"; |
| case WOW_REASON_REASSOC_RES_RECV: |
| return "REASSOC_RES_RECV"; |
| case WOW_REASON_ACTION_FRAME_RECV: |
| return "ACTION_FRAME_RECV"; |
| case WOW_REASON_OEM_RESPONSE_EVENT: |
| return "WOW_REASON_OEM_RESPONSE_EVENT"; |
| } |
| return "unknown"; |
| } |
| |
| static void wma_beacon_miss_handler(tp_wma_handle wma, u_int32_t vdev_id, |
| uint32_t rssi) |
| { |
| tSirSmeMissedBeaconInd *beacon_miss_ind; |
| |
| beacon_miss_ind = (tSirSmeMissedBeaconInd *) vos_mem_malloc |
| (sizeof(tSirSmeMissedBeaconInd)); |
| |
| if (NULL == beacon_miss_ind) { |
| WMA_LOGE("%s: Memory allocation failure", __func__); |
| return; |
| } |
| beacon_miss_ind->messageType = WDA_MISSED_BEACON_IND; |
| beacon_miss_ind->length = sizeof(tSirSmeMissedBeaconInd); |
| beacon_miss_ind->bssIdx = vdev_id; |
| |
| wma_send_msg(wma, WDA_MISSED_BEACON_IND, |
| (void *)beacon_miss_ind, 0); |
| |
| wma_lost_link_info_handler(wma, vdev_id, rssi + |
| WMA_TGT_NOISE_FLOOR_DBM); |
| } |
| |
| #ifdef FEATURE_WLAN_LPHB |
| static int wma_lphb_handler(tp_wma_handle wma, u_int8_t *event) |
| { |
| wmi_hb_ind_event_fixed_param *hb_fp; |
| tSirLPHBInd *slphb_indication; |
| VOS_STATUS vos_status; |
| vos_msg_t sme_msg = {0} ; |
| |
| hb_fp = (wmi_hb_ind_event_fixed_param *)event; |
| if (!hb_fp) { |
| WMA_LOGE("Invalid wmi_hb_ind_event_fixed_param buffer"); |
| return -EINVAL; |
| } |
| |
| WMA_LOGD("lphb indication received with vdev_id=%d, session=%d, reason=%d", |
| hb_fp->vdev_id, hb_fp->session, hb_fp->reason); |
| |
| slphb_indication = (tSirLPHBInd *) vos_mem_malloc(sizeof(tSirLPHBInd)); |
| |
| if (!slphb_indication) { |
| WMA_LOGE("Invalid LPHB indication buffer"); |
| return -EINVAL; |
| } |
| |
| slphb_indication->sessionIdx = hb_fp->session; |
| slphb_indication->protocolType = hb_fp->reason; |
| slphb_indication->eventReason= hb_fp->reason; |
| |
| sme_msg.type = eWNI_SME_LPHB_IND; |
| sme_msg.bodyptr = slphb_indication; |
| sme_msg.bodyval = 0; |
| |
| vos_status = vos_mq_post_message(VOS_MODULE_ID_SME, &sme_msg); |
| if ( !VOS_IS_STATUS_SUCCESS(vos_status) ) |
| { |
| WMA_LOGE("Fail to post eWNI_SME_LPHB_IND msg to SME"); |
| vos_mem_free(slphb_indication); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| #endif /* FEATURE_WLAN_LPHB */ |
| |
| #ifdef FEATURE_WLAN_D0WOW |
| /* |
| * Handler to catch D0-WOW disable ACK event. |
| */ |
| static int wma_d0_wow_disable_ack_event(void *handle, u_int8_t *event, |
| u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_D0_WOW_DISABLE_ACK_EVENTID_param_tlvs *param_buf; |
| wmi_d0_wow_disable_ack_event_fixed_param *resp_data; |
| |
| param_buf = (WMI_D0_WOW_DISABLE_ACK_EVENTID_param_tlvs *)event; |
| if (!param_buf) { |
| WMA_LOGE("Invalid D0-WOW disable ACK event buffer!"); |
| return -EINVAL; |
| } |
| |
| resp_data = param_buf->fixed_param; |
| vos_event_set(&wma->wma_resume_event); |
| WMA_LOGD("Received D0-WOW disable ACK"); |
| return 0; |
| } |
| #endif |
| |
| /* function : wma_get_temperature |
| * Descriptin : Function is used to send get pdev temperature req |
| * Args : wma_handle, request data which will be non-null |
| * Returns : SUCCESS or FAILURE |
| */ |
| VOS_STATUS wma_get_temperature(tp_wma_handle wma_handle) |
| { |
| wmi_pdev_get_temperature_cmd_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len = sizeof(wmi_pdev_get_temperature_cmd_fixed_param); |
| u_int8_t *buf_ptr; |
| |
| if (!wma_handle) { |
| WMA_LOGE(FL("WMA is closed, can not issue cmd")); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| wmi_buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE(FL("wmi_buf_alloc failed")); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t*)wmi_buf_data(wmi_buf); |
| |
| cmd = (wmi_pdev_get_temperature_cmd_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_pdev_get_temperature_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_pdev_get_temperature_cmd_fixed_param)); |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, wmi_buf, len, |
| WMI_PDEV_GET_TEMPERATURE_CMDID)) { |
| WMA_LOGE(FL("failed to send get temperature command")); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* function : wma_pdev_temperature_evt_handler |
| * Description : Handler for WMI_PDEV_TEMPERATURE_EVENTID event from firmware |
| * : This event reports the chip temperature |
| * Returns : |
| */ |
| static int wma_pdev_temperature_evt_handler(void *handle, u_int8_t *event, |
| u_int32_t len) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| vos_msg_t sme_msg = {0}; |
| WMI_PDEV_TEMPERATURE_EVENTID_param_tlvs *param_buf; |
| wmi_pdev_temperature_event_fixed_param *wmi_event; |
| |
| param_buf = (WMI_PDEV_TEMPERATURE_EVENTID_param_tlvs *) event; |
| if (!param_buf) |
| { |
| WMA_LOGE("Invalid pdev_temperature event buffer"); |
| return -EINVAL; |
| } |
| |
| wmi_event = param_buf->fixed_param; |
| WMA_LOGI(FL("temperature: %d"), wmi_event->value); |
| |
| sme_msg.type = eWNI_SME_MSG_GET_TEMPERATURE_IND; |
| sme_msg.bodyptr = NULL; |
| sme_msg.bodyval = wmi_event->value; |
| |
| vos_status = vos_mq_post_message(VOS_MODULE_ID_SME, &sme_msg); |
| if (!VOS_IS_STATUS_SUCCESS(vos_status) ) |
| { |
| WMA_LOGE(FL("Fail to post get temperature ind msg")); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * wma_log_supported_evt_handler() - Enable/Disable FW diag/log events |
| * @handle: WMA handle |
| * @event: Event received from FW |
| * @len: Length of the event |
| * |
| * Enables the low frequency events and disables the high frequency |
| * events. Bit 17 indicates if the event if low/high frequency. |
| * 1 - high frequency, 0 - low frequency |
| * |
| * Return: 0 on successfully enabling/disabling the events |
| */ |
| static int wma_log_supported_evt_handler(void *handle, |
| u_int8_t *event, |
| u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| uint32_t num_of_diag_events_logs; |
| wmi_diag_event_log_config_fixed_param *cmd; |
| wmi_buf_t buf; |
| uint8_t *buf_ptr; |
| uint32_t *cmd_args, *evt_args; |
| uint32_t buf_len, i; |
| |
| WMI_DIAG_EVENT_LOG_SUPPORTED_EVENTID_param_tlvs *param_buf; |
| wmi_diag_event_log_supported_event_fixed_params *wmi_event; |
| |
| WMA_LOGI("Received WMI_DIAG_EVENT_LOG_SUPPORTED_EVENTID"); |
| |
| param_buf = (WMI_DIAG_EVENT_LOG_SUPPORTED_EVENTID_param_tlvs *) event; |
| if (!param_buf) { |
| WMA_LOGE("Invalid log supported event buffer"); |
| return -EINVAL; |
| } |
| wmi_event = param_buf->fixed_param; |
| num_of_diag_events_logs = wmi_event->num_of_diag_events_logs; |
| if (num_of_diag_events_logs > |
| param_buf->num_diag_events_logs_list) { |
| WMA_LOGE("message number of events %d is more than tlv hdr content %d", |
| num_of_diag_events_logs, |
| param_buf->num_diag_events_logs_list); |
| return -EINVAL; |
| } |
| evt_args = param_buf->diag_events_logs_list; |
| if (!evt_args) { |
| WMA_LOGE("%s: Event list is empty, num_of_diag_events_logs=%d", |
| __func__, num_of_diag_events_logs); |
| return -EINVAL; |
| } |
| |
| WMA_LOGD("%s: num_of_diag_events_logs=%d", |
| __func__, num_of_diag_events_logs); |
| |
| if (num_of_diag_events_logs > |
| (WMA_SVC_MSG_MAX_SIZE / sizeof(uint32_t))) { |
| WMA_LOGE("%s: excess num of logs:%d", __func__, |
| num_of_diag_events_logs); |
| VOS_ASSERT(0); |
| return -EINVAL; |
| } |
| |
| /* Free any previous allocation */ |
| if (wma->events_logs_list) |
| vos_mem_free(wma->events_logs_list); |
| |
| /* Store the event list for run time enable/disable */ |
| wma->events_logs_list = vos_mem_malloc(num_of_diag_events_logs * |
| sizeof(uint32_t)); |
| if (!wma->events_logs_list) { |
| WMA_LOGE("%s: event log list memory allocation failed", |
| __func__); |
| return -ENOMEM; |
| } |
| wma->num_of_diag_events_logs = num_of_diag_events_logs; |
| |
| /* Prepare the send buffer */ |
| buf_len = sizeof(*cmd) + WMI_TLV_HDR_SIZE + |
| (num_of_diag_events_logs * sizeof(uint32_t)); |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, buf_len); |
| if (!buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| vos_mem_free(wma->events_logs_list); |
| wma->events_logs_list = NULL; |
| return -ENOMEM; |
| } |
| |
| cmd = (wmi_diag_event_log_config_fixed_param *) wmi_buf_data(buf); |
| buf_ptr = (uint8_t *) cmd; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_diag_event_log_config_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_diag_event_log_config_fixed_param)); |
| |
| cmd->num_of_diag_events_logs = num_of_diag_events_logs; |
| |
| buf_ptr += sizeof(wmi_diag_event_log_config_fixed_param); |
| |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_UINT32, |
| (num_of_diag_events_logs * sizeof(uint32_t))); |
| |
| cmd_args = (uint32_t *) (buf_ptr + WMI_TLV_HDR_SIZE); |
| |
| /* Populate the events */ |
| for (i = 0; i < num_of_diag_events_logs; i++) { |
| /* Low freq (0) - Enable (1) the event |
| * High freq (1) - Disable (0) the event |
| */ |
| WMI_DIAG_ID_ENABLED_DISABLED_SET(cmd_args[i], |
| !(WMI_DIAG_FREQUENCY_GET(evt_args[i]))); |
| /* Set the event ID */ |
| WMI_DIAG_ID_SET(cmd_args[i], |
| WMI_DIAG_ID_GET(evt_args[i])); |
| /* Set the type */ |
| WMI_DIAG_TYPE_SET(cmd_args[i], |
| WMI_DIAG_TYPE_GET(evt_args[i])); |
| /* Storing the event/log list in WMA */ |
| wma->events_logs_list[i] = evt_args[i]; |
| } |
| |
| if (wmi_unified_cmd_send(wma->wmi_handle, buf, buf_len, |
| WMI_DIAG_EVENT_LOG_CONFIG_CMDID)) { |
| WMA_LOGE("%s: WMI_DIAG_EVENT_LOG_CONFIG_CMDID failed", |
| __func__); |
| wmi_buf_free(buf); |
| /* Not clearing events_logs_list, though wmi cmd failed. |
| * Host can still have this list |
| */ |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * wma_flush_complete_evt_handler() - FW log flush complete event handler |
| * @handle: WMI handle |
| * @event: Event recevied from FW |
| * @len: Length of the event |
| * |
| */ |
| static int wma_flush_complete_evt_handler(void *handle, |
| u_int8_t *event, |
| u_int32_t len) |
| { |
| VOS_STATUS status; |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| |
| WMI_DEBUG_MESG_FLUSH_COMPLETE_EVENTID_param_tlvs *param_buf; |
| wmi_debug_mesg_flush_complete_fixed_param *wmi_event; |
| uint32_t reason_code; |
| |
| param_buf = (WMI_DEBUG_MESG_FLUSH_COMPLETE_EVENTID_param_tlvs *) event; |
| if (!param_buf) { |
| WMA_LOGE("Invalid log flush complete event buffer"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| wmi_event = param_buf->fixed_param; |
| reason_code = wmi_event->reserved0; |
| |
| /* |
| * reason_code = 0; Flush event in response to flush command |
| * reason_code = other value; Asynchronous flush event for fatal events |
| */ |
| if (!reason_code && (vos_is_log_report_in_progress() == false)) { |
| WMA_LOGE("Received WMI flush event without sending CMD"); |
| return -EINVAL; |
| } else if (!reason_code && vos_is_log_report_in_progress() == true) { |
| /* Flush event in response to flush command */ |
| WMA_LOGI("Received WMI flush event in response to flush CMD"); |
| status = vos_timer_stop(&wma->log_completion_timer); |
| if (status != VOS_STATUS_SUCCESS) |
| WMA_LOGE("Failed to stop the log completion timeout"); |
| vos_logging_set_fw_flush_complete(); |
| } else if (reason_code && vos_is_log_report_in_progress() == false) { |
| /* Asynchronous flush event for fatal events */ |
| WMA_LOGE("Received asynchronous WMI flush event: reason=%d", |
| reason_code); |
| status = vos_set_log_completion(WLAN_LOG_TYPE_FATAL, |
| WLAN_LOG_INDICATOR_FIRMWARE, |
| reason_code); |
| if (VOS_STATUS_SUCCESS != status) { |
| WMA_LOGE("%s: Failed to set log trigger params", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| vos_logging_set_fw_flush_complete(); |
| return status; |
| } else { |
| /* Asynchronous flush event for fatal event, |
| * but, report in progress already |
| */ |
| WMA_LOGI("%s: Bug report already in progress - dropping! type:%d, indicator=%d reason_code=%d", |
| __func__, WLAN_LOG_TYPE_FATAL, |
| WLAN_LOG_INDICATOR_FIRMWARE, reason_code); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return 0; |
| } |
| |
| #ifdef FEATURE_WLAN_EXTSCAN |
| /** |
| * wma_extscan_get_eventid_from_tlvtag() - map tlv tag to corresponding event id |
| * @tag: WMI TLV tag |
| * |
| * Return: |
| * 0 if TLV tag is invalid |
| * else return corresponding WMI event id |
| */ |
| static int wma_extscan_get_eventid_from_tlvtag(uint32_t tag) |
| { |
| uint32_t event_id; |
| |
| switch (tag) { |
| case WMITLV_TAG_STRUC_wmi_extscan_start_stop_event_fixed_param: |
| event_id = WMI_EXTSCAN_START_STOP_EVENTID; |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_operation_event_fixed_param: |
| event_id = WMI_EXTSCAN_OPERATION_EVENTID; |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_table_usage_event_fixed_param: |
| event_id = WMI_EXTSCAN_TABLE_USAGE_EVENTID; |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_cached_results_event_fixed_param: |
| event_id = WMI_EXTSCAN_CACHED_RESULTS_EVENTID; |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_wlan_change_results_event_fixed_param: |
| event_id = WMI_EXTSCAN_WLAN_CHANGE_RESULTS_EVENTID; |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_hotlist_match_event_fixed_param: |
| event_id = WMI_EXTSCAN_HOTLIST_MATCH_EVENTID; |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_capabilities_event_fixed_param: |
| event_id = WMI_EXTSCAN_CAPABILITIES_EVENTID; |
| break; |
| |
| default: |
| event_id = 0; |
| WMA_LOGE("%s: Unknown tag: %d", __func__, tag); |
| break; |
| } |
| |
| WMA_LOGI("%s: For tag %d WMI event 0x%x", __func__, tag, event_id); |
| return event_id; |
| } |
| |
| /** |
| * wma_extscan_wow_event_callback() - extscan wow event callback |
| * @handle: WMA handle |
| * @event: event buffer |
| * @len: length of @event buffer |
| * |
| * In wow case, the wow event is followed by the payload of the event |
| * which generated the wow event. |
| * payload is 4 bytes of length followed by event buffer. the first 4 bytes |
| * of event buffer is common tlv header, which is a combination |
| * of tag (higher 2 bytes) and length (lower 2 bytes). The tag is used to |
| * identify the event which triggered wow event. |
| * |
| * @Return: none |
| */ |
| static void wma_extscan_wow_event_callback(void *handle, void *event, |
| uint32_t len) |
| { |
| uint32_t id; |
| int tlv_ok_status = 0; |
| void *wmi_cmd_struct_ptr = NULL; |
| uint32_t tag = WMITLV_GET_TLVTAG(WMITLV_GET_HDR(event)); |
| |
| id = wma_extscan_get_eventid_from_tlvtag(tag); |
| if (!id) { |
| WMA_LOGE("%s: Invalid Tag: %d", __func__, tag); |
| return; |
| } |
| |
| tlv_ok_status = wmitlv_check_and_pad_event_tlvs( |
| handle, event, len, id, |
| &wmi_cmd_struct_ptr); |
| if (tlv_ok_status != 0) { |
| WMA_LOGE("%s: Invalid Tag: %d could not check and pad tlvs", |
| __func__, tag); |
| return; |
| } |
| |
| switch (tag) { |
| case WMITLV_TAG_STRUC_wmi_extscan_start_stop_event_fixed_param: |
| wma_extscan_start_stop_event_handler(handle, |
| wmi_cmd_struct_ptr, len); |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_operation_event_fixed_param: |
| wma_extscan_operations_event_handler(handle, |
| wmi_cmd_struct_ptr, len); |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_table_usage_event_fixed_param: |
| wma_extscan_table_usage_event_handler(handle, |
| wmi_cmd_struct_ptr, len); |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_cached_results_event_fixed_param: |
| wma_extscan_cached_results_event_handler(handle, |
| wmi_cmd_struct_ptr, len); |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_wlan_change_results_event_fixed_param: |
| wma_extscan_change_results_event_handler(handle, |
| wmi_cmd_struct_ptr, len); |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_hotlist_match_event_fixed_param: |
| wma_extscan_hotlist_match_event_handler(handle, |
| wmi_cmd_struct_ptr, len); |
| break; |
| |
| case WMITLV_TAG_STRUC_wmi_extscan_capabilities_event_fixed_param: |
| wma_extscan_capabilities_event_handler(handle, |
| wmi_cmd_struct_ptr, len); |
| break; |
| |
| default: |
| WMA_LOGE("%s: Unknown tag: %d", __func__, tag); |
| break; |
| } |
| wmitlv_free_allocated_event_tlvs(id, &wmi_cmd_struct_ptr); |
| |
| return; |
| } |
| #endif |
| |
| /** |
| * wma_wow_wake_up_stats_display() - display wow wake up stats |
| * @wma: Pointer to wma handle |
| * |
| * Return: none |
| */ |
| static void wma_wow_wake_up_stats_display(tp_wma_handle wma) |
| { |
| WMA_LOGA("uc %d bc %d v4_mc %d v6_mc %d ra %d ns %d na %d pno_match %d pno_complete %d gscan %d low_rssi %d rssi_breach %d icmp %d icmpv6 %d oem %d chip pwr save fail : %d", |
| wma->wow_ucast_wake_up_count, |
| wma->wow_bcast_wake_up_count, |
| wma->wow_ipv4_mcast_wake_up_count, |
| wma->wow_ipv6_mcast_wake_up_count, |
| wma->wow_ipv6_mcast_ra_stats, |
| wma->wow_ipv6_mcast_ns_stats, |
| wma->wow_ipv6_mcast_na_stats, |
| wma->wow_pno_match_wake_up_count, |
| wma->wow_pno_complete_wake_up_count, |
| wma->wow_gscan_wake_up_count, |
| wma->wow_low_rssi_wake_up_count, |
| wma->wow_rssi_breach_wake_up_count, |
| wma->wow_icmpv4_count, |
| wma->wow_icmpv6_count, |
| wma->wow_oem_response_wake_up_count, |
| wma->wow_pwr_save_fail_detected_wake_up_count); |
| |
| return; |
| } |
| |
| /** |
| * wma_wow_ipv6_mcast_stats() - ipv6 mcast wake up stats |
| * @wma: Pointer to wma handle |
| * @data: Pointer to pattern match data |
| * |
| * Return: none |
| */ |
| static void wma_wow_ipv6_mcast_stats(tp_wma_handle wma, uint8_t *data) |
| { |
| static const uint8_t ipv6_ether_type[] = {0x86, 0xDD}; |
| |
| if (!memcmp(ipv6_ether_type, (data + WMA_ETHER_TYPE_OFFSET), |
| sizeof(ipv6_ether_type))) { |
| if (WMA_ICMP_V6_HEADER_TYPE == |
| *(data + WMA_ICMP_V6_HEADER_OFFSET)) { |
| wma->wow_icmpv6_count++; |
| if (WMA_ICMP_V6_RA_TYPE == |
| *(data + WMA_ICMP_V6_TYPE_OFFSET)) |
| wma->wow_ipv6_mcast_ra_stats++; |
| else if (WMA_ICMP_V6_NS_TYPE == |
| *(data + WMA_ICMP_V6_TYPE_OFFSET)) |
| wma->wow_ipv6_mcast_ns_stats++; |
| else if (WMA_ICMP_V6_NA_TYPE == |
| *(data + WMA_ICMP_V6_TYPE_OFFSET)) |
| wma->wow_ipv6_mcast_na_stats++; |
| else |
| WMA_LOGA("ICMP V6 type : 0x%x", |
| *(data + WMA_ICMP_V6_TYPE_OFFSET)); |
| } else { |
| WMA_LOGA("ICMP_V6 header 0x%x", |
| *(data + WMA_ICMP_V6_HEADER_OFFSET)); |
| } |
| } else { |
| WMA_LOGA("Ethertype x%x:0x%x", |
| *(data + WMA_ETHER_TYPE_OFFSET), |
| *(data + WMA_ETHER_TYPE_OFFSET + 1)); |
| } |
| |
| return; |
| } |
| |
| /** |
| * wma_wow_wake_up_stats() - maintain wow pattern match wake up stats |
| * @wma: Pointer to wma handle |
| * @data: Pointer to pattern match data |
| * @len: Pattern match data length |
| * @event: Wake up event |
| * |
| * Return: none |
| */ |
| static void wma_wow_wake_up_stats(tp_wma_handle wma, uint8_t *data, |
| int32_t len, WOW_WAKE_REASON_TYPE event) |
| { |
| /* Do not increment debug stats if resume is for runtime pm */ |
| if (wmi_get_runtime_pm_inprogress(wma->wmi_handle)) |
| return; |
| |
| switch(event) { |
| |
| case WOW_REASON_PATTERN_MATCH_FOUND: |
| if (WMA_BCAST_MAC_ADDR == *data) { |
| wma->wow_bcast_wake_up_count++; |
| if (len >= WMA_IPV4_PROTO_GET_MIN_LEN && |
| adf_nbuf_data_is_icmp_pkt(data)) |
| wma->wow_icmpv4_count++; |
| else if ((len > WMA_ICMP_V6_TYPE_OFFSET) && |
| adf_nbuf_data_is_icmpv6_pkt(data)) |
| wma->wow_icmpv6_count++; |
| } else if (WMA_MCAST_IPV4_MAC_ADDR == *data) { |
| wma->wow_ipv4_mcast_wake_up_count++; |
| if (len >= WMA_IPV4_PROTO_GET_MIN_LEN && |
| WMA_ICMP_PROTOCOL == *(data + WMA_IPV4_PROTOCOL)) |
| wma->wow_icmpv4_count++; |
| } else if (WMA_MCAST_IPV6_MAC_ADDR == *data) { |
| wma->wow_ipv6_mcast_wake_up_count++; |
| if (len > WMA_ICMP_V6_TYPE_OFFSET) |
| wma_wow_ipv6_mcast_stats(wma, data); |
| else |
| WMA_LOGA("ICMP_V6 data len %d", len); |
| } else { |
| wma->wow_ucast_wake_up_count++; |
| if (adf_nbuf_data_is_ipv4_mcast_pkt(data)) |
| wma->wow_ipv4_mcast_wake_up_count++; |
| else if (adf_nbuf_data_is_ipv6_mcast_pkt(data)) |
| wma->wow_ipv6_mcast_wake_up_count++; |
| |
| if (len >= WMA_IPV4_PROTO_GET_MIN_LEN && |
| adf_nbuf_data_is_icmp_pkt(data)) |
| wma->wow_icmpv4_count++; |
| else if (len > WMA_ICMP_V6_TYPE_OFFSET && |
| adf_nbuf_data_is_icmpv6_pkt(data)) |
| wma->wow_icmpv6_count++; |
| } |
| break; |
| |
| case WOW_REASON_RA_MATCH: |
| wma->wow_icmpv6_count++; |
| wma->wow_ipv6_mcast_ra_stats++; |
| wma->wow_ipv6_mcast_wake_up_count++; |
| break; |
| |
| case WOW_REASON_NLOD: |
| wma->wow_pno_match_wake_up_count++; |
| break; |
| |
| case WOW_REASON_NLO_SCAN_COMPLETE: |
| wma->wow_pno_complete_wake_up_count++; |
| break; |
| |
| case WOW_REASON_LOW_RSSI: |
| wma->wow_low_rssi_wake_up_count++; |
| break; |
| |
| case WOW_REASON_EXTSCAN: |
| wma->wow_gscan_wake_up_count++; |
| break; |
| |
| case WOW_REASON_RSSI_BREACH_EVENT: |
| wma->wow_rssi_breach_wake_up_count++; |
| break; |
| |
| case WOW_REASON_OEM_RESPONSE_EVENT: |
| wma->wow_oem_response_wake_up_count++; |
| break; |
| |
| case WOW_REASON_CHIP_POWER_FAILURE_DETECT: |
| wma->wow_pwr_save_fail_detected_wake_up_count++; |
| break; |
| |
| default: |
| WMA_LOGE("Unknown wake up reason"); |
| break; |
| } |
| |
| wma_wow_wake_up_stats_display(wma); |
| return; |
| } |
| |
| |
| /** |
| * wma_wow_ap_lost_helper() - helper function to handle WOW_REASON_AP_ASSOC_LOST |
| * reason code and retrieve RSSI from the event. |
| * @wma: Pointer to wma handle |
| * @param: WMI_WOW_WAKEUP_HOST_EVENTID_param_tlvs buffer pointer |
| * |
| * Return: none |
| */ |
| static void wma_wow_ap_lost_helper(tp_wma_handle wma, void *param) |
| { |
| WMI_WOW_WAKEUP_HOST_EVENTID_param_tlvs *param_buf; |
| WOW_EVENT_INFO_fixed_param *wake_info; |
| WMI_ROAM_EVENTID_param_tlvs event_param; |
| wmi_roam_event_fixed_param *roam_event; |
| u_int32_t wow_buf_pkt_len = 0; |
| |
| param_buf = (WMI_WOW_WAKEUP_HOST_EVENTID_param_tlvs *) param; |
| wake_info = param_buf->fixed_param; |
| WMA_LOGA("%s: Beacon miss indication on vdev %d", |
| __func__, wake_info->vdev_id); |
| |
| if (NULL == param_buf->wow_packet_buffer) { |
| WMA_LOGE("%s: invalid wow packet buffer", __func__); |
| goto exit_handler; |
| } |
| |
| vos_mem_copy((u_int8_t *) &wow_buf_pkt_len, |
| param_buf->wow_packet_buffer, 4); |
| WMA_LOGD("wow_packet_buffer dump"); |
| vos_trace_hex_dump(VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_DEBUG, |
| param_buf->wow_packet_buffer, wow_buf_pkt_len); |
| if (wow_buf_pkt_len >= sizeof(event_param)) { |
| roam_event = (wmi_roam_event_fixed_param *) |
| (param_buf->wow_packet_buffer + 4); |
| wma_beacon_miss_handler(wma, wake_info->vdev_id, |
| roam_event->rssi); |
| return; |
| } |
| |
| exit_handler: |
| /* in the case that no RSSI is available from the event */ |
| WMA_LOGE("%s: rssi is not available from wow_packet_buffer", __func__); |
| wma_beacon_miss_handler(wma, wake_info->vdev_id, 0); |
| } |
| |
| /** |
| * wma_pkt_proto_subtype_to_string() - to convert proto subtype |
| * of data packet to string. |
| * @proto_subtype: proto subtype for data packet |
| * |
| * This function returns the string for the proto subtype of |
| * data packet. |
| * |
| * Return: string for proto subtype for data packet |
| */ |
| const char * |
| wma_pkt_proto_subtype_to_string(enum adf_proto_subtype proto_subtype) |
| { |
| switch (proto_subtype) { |
| case ADF_PROTO_EAPOL_M1: |
| return "EAPOL M1"; |
| case ADF_PROTO_EAPOL_M2: |
| return "EAPOL M2"; |
| case ADF_PROTO_EAPOL_M3: |
| return "EAPOL M3"; |
| case ADF_PROTO_EAPOL_M4: |
| return "EAPOL M4"; |
| case ADF_PROTO_DHCP_DISCOVER: |
| return "DHCP DISCOVER"; |
| case ADF_PROTO_DHCP_REQUEST: |
| return "DHCP REQUEST"; |
| case ADF_PROTO_DHCP_OFFER: |
| return "DHCP OFFER"; |
| case ADF_PROTO_DHCP_ACK: |
| return "DHCP ACK"; |
| case ADF_PROTO_DHCP_NACK: |
| return "DHCP NACK"; |
| case ADF_PROTO_DHCP_RELEASE: |
| return "DHCP RELEASE"; |
| case ADF_PROTO_DHCP_INFORM: |
| return "DHCP INFORM"; |
| case ADF_PROTO_DHCP_DECLINE: |
| return "DHCP DECLINE"; |
| case ADF_PROTO_ARP_REQ: |
| return "ARP REQUEST"; |
| case ADF_PROTO_ARP_RES: |
| return "ARP RESPONSE"; |
| case ADF_PROTO_ICMP_REQ: |
| return "ICMP REQUEST"; |
| case ADF_PROTO_ICMP_RES: |
| return "ICMP RESPONSE"; |
| case ADF_PROTO_ICMPV6_REQ: |
| return "ICMPV6 REQUEST"; |
| case ADF_PROTO_ICMPV6_RES: |
| return "ICMPV6 RESPONSE"; |
| case ADF_PROTO_ICMPV6_RS: |
| return "ICMPV6 RS"; |
| case ADF_PROTO_ICMPV6_RA: |
| return "ICMPV6 RA"; |
| case ADF_PROTO_ICMPV6_NS: |
| return "ICMPV6 NS"; |
| case ADF_PROTO_ICMPV6_NA: |
| return "ICMPV6 NA"; |
| case ADF_PROTO_IPV4_UDP: |
| return "IPV4 UDP Packet"; |
| case ADF_PROTO_IPV4_TCP: |
| return "IPV4 TCP Packet"; |
| case ADF_PROTO_IPV6_UDP: |
| return "IPV6 UDP Packet"; |
| case ADF_PROTO_IPV6_TCP: |
| return "IPV6 TCP Packet"; |
| default: |
| return "Invalid Packet"; |
| } |
| } |
| |
| /** |
| * wma_wow_get_pkt_proto_subtype() - get the proto subtype |
| * of the packet. |
| * @data: Pointer to data buffer |
| * @len: length of the data buffer |
| * |
| * This function gives the proto subtype of the packet. |
| * |
| * Return: proto subtype of the packet. |
| */ |
| static enum adf_proto_subtype |
| wma_wow_get_pkt_proto_subtype(uint8_t *data, |
| uint32_t len) |
| { |
| uint16_t ether_type = (uint16_t)(*(uint16_t *)(data + |
| ADF_NBUF_TRAC_ETH_TYPE_OFFSET)); |
| |
| WMA_LOGD("Ether Type: 0x%04x", |
| adf_os_cpu_to_be16(ether_type)); |
| |
| if (ADF_NBUF_TRAC_EAPOL_ETH_TYPE == |
| adf_os_cpu_to_be16(ether_type)) { |
| if (len >= WMA_EAPOL_SUBTYPE_GET_MIN_LEN) |
| return adf_nbuf_data_get_eapol_subtype(data); |
| WMA_LOGD("EAPOL Packet"); |
| return ADF_PROTO_INVALID; |
| } else if (ADF_NBUF_TRAC_ARP_ETH_TYPE == |
| adf_os_cpu_to_be16(ether_type)) { |
| if (len >= WMA_ARP_SUBTYPE_GET_MIN_LEN) |
| return adf_nbuf_data_get_arp_subtype(data); |
| WMA_LOGD("ARP Packet"); |
| return ADF_PROTO_INVALID; |
| } else if (ADF_NBUF_TRAC_IPV4_ETH_TYPE == |
| adf_os_cpu_to_be16(ether_type)) { |
| if (len >= WMA_IPV4_PROTO_GET_MIN_LEN) { |
| uint8_t proto_type; |
| |
| proto_type = adf_nbuf_data_get_ipv4_proto(data); |
| WMA_LOGD("IPV4_proto_type: %u", proto_type); |
| if (proto_type == ADF_NBUF_TRAC_ICMP_TYPE) { |
| if (len >= WMA_ICMP_SUBTYPE_GET_MIN_LEN) |
| return adf_nbuf_data_get_icmp_subtype( |
| data); |
| WMA_LOGD("ICMP Packet"); |
| return ADF_PROTO_INVALID; |
| } else if (proto_type == ADF_NBUF_TRAC_UDP_TYPE) { |
| if (len >= WMA_IS_DHCP_GET_MIN_LEN) { |
| if (adf_nbuf_data_is_dhcp_pkt(data)) { |
| if (len >= |
| WMA_DHCP_SUBTYPE_GET_MIN_LEN) |
| return adf_nbuf_data_get_dhcp_subtype(data); |
| WMA_LOGD("DHCP Packet"); |
| return ADF_PROTO_INVALID; |
| } |
| } |
| return ADF_PROTO_IPV4_UDP; |
| } else if (proto_type == ADF_NBUF_TRAC_TCP_TYPE) { |
| return ADF_PROTO_IPV4_TCP; |
| } |
| } |
| WMA_LOGD("IPV4 Packet"); |
| return ADF_PROTO_INVALID; |
| } else if (ADF_NBUF_TRAC_IPV6_ETH_TYPE == |
| adf_os_cpu_to_be16(ether_type)) { |
| if (len >= WMA_IPV6_PROTO_GET_MIN_LEN) { |
| uint8_t proto_type; |
| |
| proto_type = adf_nbuf_data_get_ipv6_proto(data); |
| WMA_LOGD("IPV6_proto_type: %u", proto_type); |
| if (proto_type == ADF_NBUF_TRAC_ICMPV6_TYPE) { |
| if (len >= WMA_ICMPV6_SUBTYPE_GET_MIN_LEN) |
| return adf_nbuf_data_get_icmpv6_subtype( |
| data); |
| WMA_LOGD("ICMPV6 Packet"); |
| return ADF_PROTO_INVALID; |
| } else if (proto_type == ADF_NBUF_TRAC_UDP_TYPE) { |
| return ADF_PROTO_IPV6_UDP; |
| } else if (proto_type == ADF_NBUF_TRAC_TCP_TYPE) { |
| return ADF_PROTO_IPV6_TCP; |
| } |
| } |
| WMA_LOGD("IPV6 Packet"); |
| return ADF_PROTO_INVALID; |
| } |
| |
| return ADF_PROTO_INVALID; |
| } |
| |
| /** |
| * wma_wow_parse_data_pkt_buffer() - API to parse data buffer for data |
| * packet that resulted in WOW wakeup. |
| * @data: Pointer to data buffer |
| * @buf_len: data buffer length |
| * |
| * This function parses the data buffer received (first few bytes of |
| * skb->data) to get informaton like src mac addr, dst mac addr, packet |
| * len, seq_num, etc. |
| * |
| * Return: void |
| */ |
| static void wma_wow_parse_data_pkt_buffer(uint8_t *data, |
| uint32_t buf_len) |
| { |
| enum adf_proto_subtype proto_subtype; |
| uint16_t pkt_len, key_len, seq_num; |
| uint16_t src_port, dst_port; |
| uint32_t transaction_id, tcp_seq_num; |
| |
| WMA_LOGD("wow_buf_pkt_len: %u", buf_len); |
| if (buf_len >= ADF_NBUF_TRAC_IPV4_OFFSET) |
| WMA_LOGD("Src_mac: " MAC_ADDRESS_STR " Dst_mac: " MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(data + ADF_NBUF_SRC_MAC_OFFSET), |
| MAC_ADDR_ARRAY(data)); |
| else |
| goto end; |
| |
| proto_subtype = wma_wow_get_pkt_proto_subtype(data, buf_len); |
| switch (proto_subtype) { |
| case ADF_PROTO_EAPOL_M1: |
| case ADF_PROTO_EAPOL_M2: |
| case ADF_PROTO_EAPOL_M3: |
| case ADF_PROTO_EAPOL_M4: |
| WMA_LOGD("WOW Wakeup: %s rcvd", |
| wma_pkt_proto_subtype_to_string(proto_subtype)); |
| if (buf_len >= WMA_EAPOL_INFO_GET_MIN_LEN) { |
| pkt_len = (uint16_t)(*(uint16_t *)(data + |
| EAPOL_PKT_LEN_OFFSET)); |
| key_len = (uint16_t)(*(uint16_t *)(data + |
| EAPOL_KEY_LEN_OFFSET)); |
| WMA_LOGD("Pkt_len: %u, Key_len: %u", |
| adf_os_cpu_to_be16(pkt_len), |
| adf_os_cpu_to_be16(key_len)); |
| } |
| break; |
| |
| case ADF_PROTO_DHCP_DISCOVER: |
| case ADF_PROTO_DHCP_REQUEST: |
| case ADF_PROTO_DHCP_OFFER: |
| case ADF_PROTO_DHCP_ACK: |
| case ADF_PROTO_DHCP_NACK: |
| case ADF_PROTO_DHCP_RELEASE: |
| case ADF_PROTO_DHCP_INFORM: |
| case ADF_PROTO_DHCP_DECLINE: |
| WMA_LOGD("WOW Wakeup: %s rcvd", |
| wma_pkt_proto_subtype_to_string(proto_subtype)); |
| if (buf_len >= WMA_DHCP_INFO_GET_MIN_LEN) { |
| pkt_len = (uint16_t)(*(uint16_t *)(data + |
| DHCP_PKT_LEN_OFFSET)); |
| transaction_id = (uint32_t)(*(uint32_t *)(data + |
| DHCP_TRANSACTION_ID_OFFSET)); |
| WMA_LOGD("Pkt_len: %u, Transaction_id: %u", |
| adf_os_cpu_to_be16(pkt_len), |
| adf_os_cpu_to_be32(transaction_id)); |
| } |
| break; |
| |
| case ADF_PROTO_ARP_REQ: |
| case ADF_PROTO_ARP_RES: |
| WMA_LOGD("WOW Wakeup: %s rcvd", |
| wma_pkt_proto_subtype_to_string(proto_subtype)); |
| break; |
| |
| case ADF_PROTO_ICMP_REQ: |
| case ADF_PROTO_ICMP_RES: |
| WMA_LOGD("WOW Wakeup: %s rcvd", |
| wma_pkt_proto_subtype_to_string(proto_subtype)); |
| if (buf_len >= WMA_IPV4_PKT_INFO_GET_MIN_LEN) { |
| pkt_len = (uint16_t)(*(uint16_t *)(data + |
| IPV4_PKT_LEN_OFFSET)); |
| seq_num = (uint16_t)(*(uint16_t *)(data + |
| ICMP_SEQ_NUM_OFFSET)); |
| WMA_LOGD("Pkt_len: %u, Seq_num: %u", |
| adf_os_cpu_to_be16(pkt_len), |
| adf_os_cpu_to_be16(seq_num)); |
| } |
| break; |
| |
| case ADF_PROTO_ICMPV6_REQ: |
| case ADF_PROTO_ICMPV6_RES: |
| case ADF_PROTO_ICMPV6_RS: |
| case ADF_PROTO_ICMPV6_RA: |
| case ADF_PROTO_ICMPV6_NS: |
| case ADF_PROTO_ICMPV6_NA: |
| WMA_LOGD("WOW Wakeup: %s rcvd", |
| wma_pkt_proto_subtype_to_string(proto_subtype)); |
| if (buf_len >= WMA_IPV6_PKT_INFO_GET_MIN_LEN) { |
| pkt_len = (uint16_t)(*(uint16_t *)(data + |
| IPV6_PKT_LEN_OFFSET)); |
| seq_num = (uint16_t)(*(uint16_t *)(data + |
| ICMPV6_SEQ_NUM_OFFSET)); |
| WMA_LOGD("Pkt_len: %u, Seq_num: %u", |
| adf_os_cpu_to_be16(pkt_len), |
| adf_os_cpu_to_be16(seq_num)); |
| } |
| break; |
| |
| case ADF_PROTO_IPV4_UDP: |
| case ADF_PROTO_IPV4_TCP: |
| WMA_LOGD("WOW Wakeup: %s rcvd", |
| wma_pkt_proto_subtype_to_string(proto_subtype)); |
| if (buf_len >= WMA_IPV4_PKT_INFO_GET_MIN_LEN) { |
| pkt_len = (uint16_t)(*(uint16_t *)(data + |
| IPV4_PKT_LEN_OFFSET)); |
| src_port = (uint16_t)(*(uint16_t *)(data + |
| IPV4_SRC_PORT_OFFSET)); |
| dst_port = (uint16_t)(*(uint16_t *)(data + |
| IPV4_DST_PORT_OFFSET)); |
| WMA_LOGD("Pkt_len: %u", |
| adf_os_cpu_to_be16(pkt_len)); |
| WMA_LOGD("src_port: %u, dst_port: %u", |
| adf_os_cpu_to_be16(src_port), |
| adf_os_cpu_to_be16(dst_port)); |
| if (proto_subtype == ADF_PROTO_IPV4_TCP) { |
| tcp_seq_num = (uint32_t)(*(uint32_t *)(data + |
| IPV4_TCP_SEQ_NUM_OFFSET)); |
| WMA_LOGD("TCP_seq_num: %u", |
| adf_os_cpu_to_be32(tcp_seq_num)); |
| } |
| } |
| break; |
| |
| case ADF_PROTO_IPV6_UDP: |
| case ADF_PROTO_IPV6_TCP: |
| WMA_LOGD("WOW Wakeup: %s rcvd", |
| wma_pkt_proto_subtype_to_string(proto_subtype)); |
| if (buf_len >= WMA_IPV6_PKT_INFO_GET_MIN_LEN) { |
| pkt_len = (uint16_t)(*(uint16_t *)(data + |
| IPV6_PKT_LEN_OFFSET)); |
| src_port = (uint16_t)(*(uint16_t *)(data + |
| IPV6_SRC_PORT_OFFSET)); |
| dst_port = (uint16_t)(*(uint16_t *)(data + |
| IPV6_DST_PORT_OFFSET)); |
| WMA_LOGD("Pkt_len: %u", |
| adf_os_cpu_to_be16(pkt_len)); |
| WMA_LOGD("src_port: %u, dst_port: %u", |
| adf_os_cpu_to_be16(src_port), |
| adf_os_cpu_to_be16(dst_port)); |
| if (proto_subtype == ADF_PROTO_IPV6_TCP) { |
| tcp_seq_num = (uint32_t)(*(uint32_t *)(data + |
| IPV6_TCP_SEQ_NUM_OFFSET)); |
| WMA_LOGD("TCP_seq_num: %u", |
| adf_os_cpu_to_be32(tcp_seq_num)); |
| } |
| } |
| break; |
| |
| default: |
| end: |
| WMA_LOGD("wow_buf_pkt_len: %u", buf_len); |
| WMA_LOGD("Unknown Packet or Insufficient packet buffer"); |
| break; |
| } |
| } |
| |
| /** |
| * wma_wow_dump_mgmt_buffer() - API to parse data buffer for mgmt. |
| * packet that resulted in WOW wakeup. |
| * @wow_packet_buffer: Pointer to data buffer |
| * @buf_len: length of data buffer |
| * |
| * This function parses the data buffer received (802.11 header) |
| * to get informaton like src mac addr, dst mac addr, seq_num, |
| * frag_num, etc. |
| * |
| * Return: void |
| */ |
| static void wma_wow_dump_mgmt_buffer(uint8_t *wow_packet_buffer, |
| uint32_t buf_len) |
| { |
| struct ieee80211_frame_addr4 *wh; |
| |
| WMA_LOGD("wow_buf_pkt_len: %u", buf_len); |
| wh = (struct ieee80211_frame_addr4 *) |
| (wow_packet_buffer + 4); |
| if (buf_len >= sizeof(struct ieee80211_frame)) { |
| uint8_t to_from_ds, frag_num; |
| uint32_t seq_num; |
| |
| WMA_LOGE("RA: " MAC_ADDRESS_STR " TA: " MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(wh->i_addr1), |
| MAC_ADDR_ARRAY(wh->i_addr2)); |
| |
| WMA_LOGE("TO_DS: %u, FROM_DS: %u", |
| wh->i_fc[1] & IEEE80211_FC1_DIR_TODS, |
| wh->i_fc[1] & IEEE80211_FC1_DIR_FROMDS); |
| |
| to_from_ds = wh->i_fc[1] & IEEE80211_FC1_DIR_DSTODS; |
| |
| switch (to_from_ds) { |
| case IEEE80211_NO_DS: |
| WMA_LOGE("BSSID: " MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(wh->i_addr3)); |
| break; |
| case IEEE80211_TO_DS: |
| WMA_LOGE("DA: " MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(wh->i_addr3)); |
| break; |
| case IEEE80211_FROM_DS: |
| WMA_LOGE("SA: " MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(wh->i_addr3)); |
| break; |
| case IEEE80211_DS_TO_DS: |
| if (buf_len >= sizeof(struct ieee80211_frame_addr4)) |
| WMA_LOGE("DA: " MAC_ADDRESS_STR " SA: " |
| MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(wh->i_addr3), |
| MAC_ADDR_ARRAY(wh->i_addr4)); |
| break; |
| } |
| |
| seq_num = (((*(uint16_t *)wh->i_seq) & |
| IEEE80211_SEQ_SEQ_MASK) >> |
| IEEE80211_SEQ_SEQ_SHIFT); |
| frag_num = (((*(uint16_t *)wh->i_seq) & |
| IEEE80211_SEQ_FRAG_MASK) >> |
| IEEE80211_SEQ_FRAG_SHIFT); |
| |
| WMA_LOGE("SEQ_NUM: %u, FRAG_NUM: %u", |
| seq_num, frag_num); |
| } else { |
| WMA_LOGE("Insufficient buffer length for mgmt. packet"); |
| } |
| } |
| |
| /** |
| * wma_wow_get_wakelock_duration() - return the wakelock duration |
| * for some mgmt packets received. |
| * @wake_reason: wow wakeup reason |
| * |
| * This function returns the wakelock duration for some mgmt packets |
| * received while in wow suspend. |
| * |
| * Return: wakelock duration |
| */ |
| static uint32_t wma_wow_get_wakelock_duration(int wake_reason) |
| { |
| uint32_t wake_lock_duration = 0; |
| |
| switch (wake_reason) { |
| case WOW_REASON_AUTH_REQ_RECV: |
| wake_lock_duration = WMA_AUTH_REQ_RECV_WAKE_LOCK_TIMEOUT; |
| break; |
| case WOW_REASON_ASSOC_REQ_RECV: |
| wake_lock_duration = WMA_ASSOC_REQ_RECV_WAKE_LOCK_DURATION; |
| break; |
| case WOW_REASON_DEAUTH_RECVD: |
| wake_lock_duration = WMA_DEAUTH_RECV_WAKE_LOCK_DURATION; |
| break; |
| case WOW_REASON_DISASSOC_RECVD: |
| wake_lock_duration = WMA_DISASSOC_RECV_WAKE_LOCK_DURATION; |
| break; |
| case WOW_REASON_AP_ASSOC_LOST: |
| wake_lock_duration = WMA_BMISS_EVENT_WAKE_LOCK_DURATION; |
| break; |
| case WOW_REASON_HOST_AUTO_SHUTDOWN: |
| wake_lock_duration = WMA_AUTO_SHUTDOWN_WAKE_LOCK_DURATION; |
| break; |
| default: |
| break; |
| } |
| |
| return wake_lock_duration; |
| } |
| |
| /** |
| * wma_wow_get_wakelock() - return the wakelock |
| * for some mgmt packets received. |
| * @wma_handle: wma handle |
| * @wake_reason: wow wakeup reason |
| * |
| * This function returns the wakelock for some mgmt packets |
| * received while in wow suspend. |
| * |
| * Return: wakelock |
| */ |
| static vos_wake_lock_t *wma_wow_get_wakelock(tp_wma_handle wma_handle, |
| int wake_reason) |
| { |
| |
| switch (wake_reason) { |
| case WOW_REASON_AUTH_REQ_RECV: |
| return &wma_handle->wow_auth_req_wl; |
| case WOW_REASON_ASSOC_REQ_RECV: |
| return &wma_handle->wow_assoc_req_wl; |
| case WOW_REASON_DEAUTH_RECVD: |
| return &wma_handle->wow_deauth_rec_wl; |
| case WOW_REASON_DISASSOC_RECVD: |
| return &wma_handle->wow_disassoc_rec_wl; |
| case WOW_REASON_AP_ASSOC_LOST: |
| return &wma_handle->wow_ap_assoc_lost_wl; |
| case WOW_REASON_HOST_AUTO_SHUTDOWN: |
| return &wma_handle->wow_auto_shutdown_wl; |
| default: |
| return NULL; |
| } |
| |
| } |
| |
| /* |
| * Handler to catch wow wakeup host event. This event will have |
| * reason why the firmware has woken the host. |
| */ |
| static int wma_wow_wakeup_host_event(void *handle, u_int8_t *event, |
| u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_WOW_WAKEUP_HOST_EVENTID_param_tlvs *param_buf; |
| WOW_EVENT_INFO_fixed_param *wake_info; |
| #ifdef FEATURE_WLAN_TDLS |
| WMI_TDLS_PEER_EVENTID_param_tlvs tdls_param; |
| #endif |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| struct wma_txrx_node *node; |
| #endif |
| u_int32_t wake_lock_duration = 0; |
| u_int32_t wow_buf_pkt_len = 0; |
| |
| param_buf = (WMI_WOW_WAKEUP_HOST_EVENTID_param_tlvs *) event; |
| if (!param_buf) { |
| WMA_LOGE("Invalid wow wakeup host event buf"); |
| return -EINVAL; |
| } |
| |
| wake_info = param_buf->fixed_param; |
| |
| if ((wake_info->wake_reason != WOW_REASON_UNSPECIFIED) || |
| (wake_info->wake_reason == WOW_REASON_UNSPECIFIED && |
| !wmi_get_runtime_pm_inprogress(wma->wmi_handle))) { |
| if (wake_info->vdev_id >= wma->max_bssid) { |
| WMA_LOGE("%s: received invalid vdev_id %d", |
| __func__, wake_info->vdev_id); |
| return -EINVAL; |
| } |
| WMA_LOGA("WOW wakeup host event received (reason: %s(%d)) for vdev %d", |
| wma_wow_wake_reason_str(wake_info->wake_reason, wma), |
| wake_info->wake_reason, |
| wake_info->vdev_id); |
| vos_wow_wakeup_host_event(wake_info->wake_reason); |
| wma_wow_wakeup_stats_event(wma); |
| } |
| |
| vos_event_set(&wma->wma_resume_event); |
| |
| switch (wake_info->wake_reason) { |
| case WOW_REASON_AUTH_REQ_RECV: |
| case WOW_REASON_ASSOC_REQ_RECV: |
| case WOW_REASON_DEAUTH_RECVD: |
| case WOW_REASON_DISASSOC_RECVD: |
| case WOW_REASON_ASSOC_RES_RECV: |
| case WOW_REASON_REASSOC_REQ_RECV: |
| case WOW_REASON_REASSOC_RES_RECV: |
| case WOW_REASON_BEACON_RECV: |
| case WOW_REASON_ACTION_FRAME_RECV: |
| if (param_buf->wow_packet_buffer) { |
| /* First 4-bytes of wow_packet_buffer is the length */ |
| vos_mem_copy((uint8_t *) &wow_buf_pkt_len, |
| param_buf->wow_packet_buffer, 4); |
| if (wow_buf_pkt_len) |
| wma_wow_dump_mgmt_buffer( |
| param_buf->wow_packet_buffer, |
| wow_buf_pkt_len); |
| else |
| WMA_LOGE("wow packet buffer is empty"); |
| } else { |
| WMA_LOGE("No wow packet buffer present"); |
| } |
| break; |
| |
| case WOW_REASON_AP_ASSOC_LOST: |
| wma_wow_ap_lost_helper(wma, param_buf); |
| break; |
| #ifdef FEATURE_WLAN_RA_FILTERING |
| case WOW_REASON_RA_MATCH: |
| wma_wow_wake_up_stats(wma, NULL, 0, WOW_REASON_RA_MATCH); |
| break; |
| #endif |
| #ifdef FEATURE_WLAN_AUTO_SHUTDOWN |
| case WOW_REASON_HOST_AUTO_SHUTDOWN: |
| WMA_LOGA("Received WOW Auto Shutdown trigger in suspend"); |
| if (wma_post_auto_shutdown_msg()) |
| return -EINVAL; |
| break; |
| #endif |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| case WOW_REASON_NLOD: |
| wma_wow_wake_up_stats(wma, NULL, 0, WOW_REASON_NLOD); |
| node = &wma->interfaces[wake_info->vdev_id]; |
| if (node) { |
| WMA_LOGD("NLO match happened"); |
| node->nlo_match_evt_received = TRUE; |
| |
| vos_wake_lock_timeout_acquire(&wma->pno_wake_lock, |
| WMA_PNO_MATCH_WAKE_LOCK_TIMEOUT, |
| WIFI_POWER_EVENT_WAKELOCK_PNO); |
| } |
| break; |
| |
| case WOW_REASON_NLO_SCAN_COMPLETE: |
| { |
| WMI_NLO_SCAN_COMPLETE_EVENTID_param_tlvs param; |
| |
| wma_wow_wake_up_stats(wma, NULL, 0, |
| WOW_REASON_NLO_SCAN_COMPLETE); |
| WMA_LOGD("Host woken up due to pno scan complete reason"); |
| /* First 4-bytes of wow_packet_buffer is the length */ |
| if (param_buf->wow_packet_buffer) { |
| param.fixed_param = (wmi_nlo_event *) |
| (param_buf->wow_packet_buffer + 4); |
| wma_nlo_scan_cmp_evt_handler(handle, |
| (u_int8_t *)¶m, |
| sizeof(param)); |
| } else |
| WMA_LOGD("No wow_packet_buffer present"); |
| } |
| break; |
| #endif |
| |
| case WOW_REASON_CSA_EVENT: |
| { |
| WMI_CSA_HANDLING_EVENTID_param_tlvs param; |
| WMA_LOGD("Host woken up because of CSA IE"); |
| param.fixed_param = (wmi_csa_event_fixed_param *) |
| (((u_int8_t *) wake_info) |
| + sizeof(WOW_EVENT_INFO_fixed_param) |
| + WOW_CSA_EVENT_OFFSET); |
| wma_csa_offload_handler(handle, (u_int8_t *)¶m, |
| sizeof(param)); |
| } |
| break; |
| |
| #ifdef FEATURE_WLAN_LPHB |
| case WOW_REASON_WLAN_HB: |
| wma_lphb_handler(wma, (u_int8_t *)param_buf->hb_indevt); |
| break; |
| #endif |
| |
| case WOW_REASON_HTT_EVENT: |
| break; |
| case WOW_REASON_BPF_ALLOW: |
| case WOW_REASON_PATTERN_MATCH_FOUND: |
| WMA_LOGD("Wake up for Rx packet, dump starting from ethernet hdr"); |
| if (param_buf->wow_packet_buffer) { |
| /* First 4-bytes of wow_packet_buffer is the length */ |
| vos_mem_copy((u_int8_t *) &wow_buf_pkt_len, |
| param_buf->wow_packet_buffer, 4); |
| if (wow_buf_pkt_len) { |
| uint8_t *data; |
| |
| wma_wow_wake_up_stats(wma, |
| param_buf->wow_packet_buffer + 4, |
| wow_buf_pkt_len, |
| WOW_REASON_PATTERN_MATCH_FOUND); |
| vos_trace_hex_dump(VOS_MODULE_ID_WDA, |
| VOS_TRACE_LEVEL_DEBUG, |
| param_buf->wow_packet_buffer + 4, |
| wow_buf_pkt_len); |
| |
| data = (uint8_t *) |
| (param_buf->wow_packet_buffer + 4); |
| wma_wow_parse_data_pkt_buffer(data, |
| wow_buf_pkt_len); |
| } else { |
| WMA_LOGE("wow packet buffer is empty"); |
| } |
| } else { |
| WMA_LOGE("No wow packet buffer present"); |
| } |
| break; |
| |
| case WOW_REASON_LOW_RSSI: |
| { |
| /* WOW_REASON_LOW_RSSI is used for all roaming events. |
| * WMI_ROAM_REASON_BETTER_AP, WMI_ROAM_REASON_BMISS, |
| * WMI_ROAM_REASON_SUITABLE_AP will be handled by |
| * wma_roam_event_callback(). |
| */ |
| WMI_ROAM_EVENTID_param_tlvs param; |
| wma_wow_wake_up_stats(wma, NULL, 0, WOW_REASON_LOW_RSSI); |
| if (param_buf->wow_packet_buffer) { |
| /* Roam event is embedded in wow_packet_buffer */ |
| WMA_LOGD("Host woken up because of roam event"); |
| vos_mem_copy((u_int8_t *) &wow_buf_pkt_len, |
| param_buf->wow_packet_buffer, 4); |
| WMA_LOGD("wow_packet_buffer dump"); |
| vos_trace_hex_dump(VOS_MODULE_ID_WDA, |
| VOS_TRACE_LEVEL_DEBUG, |
| param_buf->wow_packet_buffer, wow_buf_pkt_len); |
| if (wow_buf_pkt_len >= sizeof(param)) { |
| param.fixed_param = (wmi_roam_event_fixed_param *) |
| (param_buf->wow_packet_buffer +4); |
| wma_roam_event_callback(handle, (u_int8_t *)¶m, |
| sizeof(param)); |
| } else { |
| WMA_LOGE("Wrong length for roam event = %d bytes", |
| wow_buf_pkt_len); |
| } |
| } else { |
| /* No wow_packet_buffer means a better AP beacon |
| * will follow in a later event. |
| */ |
| WMA_LOGD("Host woken up because of better AP beacon"); |
| } |
| break; |
| } |
| case WOW_REASON_CLIENT_KICKOUT_EVENT: |
| { |
| WMI_PEER_STA_KICKOUT_EVENTID_param_tlvs param; |
| if (param_buf->wow_packet_buffer) { |
| /* station kickout event embedded in wow_packet_buffer */ |
| WMA_LOGD("Host woken up because of sta_kickout event"); |
| vos_mem_copy((u_int8_t *) &wow_buf_pkt_len, |
| param_buf->wow_packet_buffer, 4); |
| WMA_LOGD("wow_packet_buffer dump"); |
| vos_trace_hex_dump(VOS_MODULE_ID_WDA, |
| VOS_TRACE_LEVEL_DEBUG, |
| param_buf->wow_packet_buffer, wow_buf_pkt_len); |
| if (wow_buf_pkt_len >= sizeof(param)) { |
| param.fixed_param = (wmi_peer_sta_kickout_event_fixed_param *) |
| (param_buf->wow_packet_buffer + 4); |
| wma_peer_sta_kickout_event_handler(handle, |
| (u_int8_t *)¶m, sizeof(param)); |
| } else { |
| WMA_LOGE("Wrong length for sta_kickout event = %d bytes", |
| wow_buf_pkt_len); |
| } |
| } else { |
| WMA_LOGD("No wow_packet_buffer present"); |
| } |
| break; |
| } |
| #ifdef FEATURE_WLAN_EXTSCAN |
| case WOW_REASON_EXTSCAN: |
| WMA_LOGD("Host woken up because of extscan reason"); |
| wma_wow_wake_up_stats(wma, NULL, 0, WOW_REASON_EXTSCAN); |
| if (param_buf->wow_packet_buffer) { |
| wow_buf_pkt_len = |
| *(uint32_t *)param_buf->wow_packet_buffer; |
| wma_extscan_wow_event_callback(handle, |
| (u_int8_t *)(param_buf->wow_packet_buffer + 4), |
| wow_buf_pkt_len); |
| } else |
| WMA_LOGE("wow_packet_buffer is empty"); |
| break; |
| #endif |
| case WOW_REASON_RSSI_BREACH_EVENT: |
| { |
| WMI_RSSI_BREACH_EVENTID_param_tlvs param; |
| |
| wma_wow_wake_up_stats(wma, NULL, 0, |
| WOW_REASON_RSSI_BREACH_EVENT); |
| WMA_LOGD("Host woken up because of rssi breach reason"); |
| /* rssi breach event is embedded in wow_packet_buffer */ |
| if (param_buf->wow_packet_buffer) { |
| vos_mem_copy((u_int8_t *) &wow_buf_pkt_len, |
| param_buf->wow_packet_buffer, 4); |
| if (wow_buf_pkt_len >= sizeof(param)) { |
| param.fixed_param = |
| (wmi_rssi_breach_event_fixed_param *) |
| (param_buf->wow_packet_buffer + 4); |
| wma_rssi_breached_event_handler(handle, |
| (u_int8_t *)¶m, |
| sizeof(param)); |
| } else { |
| WMA_LOGE("%s: Wrong length: %d bytes", |
| __func__, wow_buf_pkt_len); |
| } |
| } else |
| WMA_LOGD("No wow_packet_buffer present"); |
| } |
| break; |
| #ifdef WLAN_FEATURE_NAN |
| case WOW_REASON_NAN_EVENT: |
| { |
| WMI_NAN_EVENTID_param_tlvs param; |
| WMA_LOGA("Host woken up due to NAN event reason"); |
| /* First 4-bytes of wow_packet_buffer is the length */ |
| param.fixed_param = (wmi_nan_event_hdr *) |
| (((u_int8_t *) wake_info) |
| + sizeof(WOW_EVENT_INFO_fixed_param) |
| + WOW_NAN_EVENT_OFFSET); |
| wma_nan_rsp_event_handler(handle, |
| (u_int8_t *)¶m, |
| sizeof(param)); |
| } |
| break; |
| #endif |
| case WOW_REASON_NAN_DATA: |
| WMA_LOGD(FL("Host woken up for NAN data event from FW")); |
| if (param_buf->wow_packet_buffer) { |
| wow_buf_pkt_len = |
| *(uint32_t *)param_buf->wow_packet_buffer; |
| WMA_LOGD(FL("wow_packet_buffer dump")); |
| vos_trace_hex_dump(VOS_MODULE_ID_WDA, |
| VOS_TRACE_LEVEL_DEBUG, |
| param_buf->wow_packet_buffer, |
| wow_buf_pkt_len); |
| wma_ndp_wow_event_callback(handle, |
| (u_int8_t *)(param_buf->wow_packet_buffer + 4), |
| wow_buf_pkt_len); |
| } else { |
| WMA_LOGE(FL("wow_packet_buffer is empty")); |
| } |
| break; |
| #ifdef FEATURE_WLAN_TDLS |
| case WOW_REASON_TDLS_CONN_TRACKER_EVENT: |
| if (param_buf->wow_packet_buffer) { |
| WMA_LOGD("Host woken up because of TDLS event"); |
| tdls_param.fixed_param = |
| (wmi_tdls_peer_event_fixed_param *) |
| (param_buf->wow_packet_buffer + 4); |
| wma_tdls_event_handler(handle, |
| (u_int8_t *)&tdls_param, sizeof(tdls_param)); |
| } else { |
| WMA_LOGD("No wow_packet_buffer present"); |
| } |
| break; |
| #endif |
| |
| case WOW_REASON_OEM_RESPONSE_EVENT: |
| wma_wow_wake_up_stats(wma, NULL, 0, |
| WOW_REASON_OEM_RESPONSE_EVENT); |
| if (param_buf->wow_packet_buffer) { |
| WMA_LOGD(FL("Host woken up by OEM Response event")); |
| wow_buf_pkt_len = |
| *(uint32_t *)param_buf->wow_packet_buffer; |
| vos_trace_hex_dump(VOS_MODULE_ID_WDA, |
| VOS_TRACE_LEVEL_DEBUG, |
| param_buf->wow_packet_buffer, |
| wow_buf_pkt_len); |
| wma_oem_data_response_handler(handle, |
| (uint8_t*)(param_buf->wow_packet_buffer), |
| wow_buf_pkt_len); |
| } else { |
| WMA_LOGD(FL("No wow_packet_buffer for OEM response")); |
| } |
| break; |
| case WOW_REASON_CHIP_POWER_FAILURE_DETECT: |
| { |
| /* Just update stats and exit */ |
| wma_wow_wake_up_stats(wma, NULL, 0, |
| WOW_REASON_CHIP_POWER_FAILURE_DETECT); |
| WMA_LOGD("Host woken up because of chip power save failure"); |
| } |
| break; |
| default: |
| break; |
| } |
| |
| wake_lock_duration = |
| wma_wow_get_wakelock_duration(wake_info->wake_reason); |
| if (wake_lock_duration) { |
| vos_wake_lock_t *wake_lock = wma_wow_get_wakelock(wma, |
| wake_info->wake_reason); |
| if (wake_lock) |
| vos_wake_lock_timeout_acquire(wake_lock, |
| wake_lock_duration, |
| WIFI_POWER_EVENT_WAKELOCK_WOW); |
| WMA_LOGA("Holding %d msec wake_lock", wake_lock_duration); |
| } |
| |
| return 0; |
| } |
| |
| static inline void wma_set_wow_bus_suspend(tp_wma_handle wma, int val) { |
| |
| adf_os_atomic_set(&wma->is_wow_bus_suspended, val); |
| } |
| |
| static inline int wma_get_wow_bus_suspend(tp_wma_handle wma) { |
| |
| return adf_os_atomic_read(&wma->is_wow_bus_suspended); |
| } |
| |
| static const u8 *wma_wow_wakeup_event_str(WOW_WAKE_EVENT_TYPE event) |
| { |
| switch (event) { |
| case WOW_BMISS_EVENT: |
| return "WOW_BMISS_EVENT"; |
| case WOW_BETTER_AP_EVENT: |
| return "WOW_BETTER_AP_EVENT"; |
| case WOW_DEAUTH_RECVD_EVENT: |
| return "WOW_DEAUTH_RECVD_EVENT"; |
| case WOW_MAGIC_PKT_RECVD_EVENT: |
| return "WOW_MAGIC_PKT_RECVD_EVENT"; |
| case WOW_GTK_ERR_EVENT: |
| return "WOW_GTK_ERR_EVENT"; |
| case WOW_FOURWAY_HSHAKE_EVENT: |
| return "WOW_GTK_ERR_EVENT"; |
| case WOW_EAPOL_RECVD_EVENT: |
| return "WOW_EAPOL_RECVD_EVENT"; |
| case WOW_NLO_DETECTED_EVENT: |
| return "WOW_NLO_DETECTED_EVENT"; |
| case WOW_DISASSOC_RECVD_EVENT: |
| return "WOW_DISASSOC_RECVD_EVENT"; |
| case WOW_PATTERN_MATCH_EVENT: |
| return "WOW_PATTERN_MATCH_EVENT"; |
| case WOW_CSA_IE_EVENT: |
| return "WOW_CSA_IE_EVENT"; |
| case WOW_PROBE_REQ_WPS_IE_EVENT: |
| return "WOW_PROBE_REQ_WPS_IE_EVENT"; |
| case WOW_AUTH_REQ_EVENT: |
| return "WOW_AUTH_REQ_EVENT"; |
| case WOW_ASSOC_REQ_EVENT: |
| return "WOW_ASSOC_REQ_EVENT"; |
| case WOW_HTT_EVENT: |
| return "WOW_HTT_EVENT"; |
| case WOW_RA_MATCH_EVENT: |
| return "WOW_RA_MATCH_EVENT"; |
| case WOW_HOST_AUTO_SHUTDOWN_EVENT: |
| return "WOW_HOST_AUTO_SHUTDOWN_EVENT"; |
| case WOW_IOAC_MAGIC_EVENT: |
| return "WOW_IOAC_MAGIC_EVENT"; |
| case WOW_IOAC_SHORT_EVENT: |
| return "WOW_IOAC_SHORT_EVENT"; |
| case WOW_IOAC_EXTEND_EVENT: |
| return "WOW_IOAC_EXTEND_EVENT"; |
| case WOW_IOAC_TIMER_EVENT: |
| return "WOW_IOAC_TIMER_EVENT"; |
| case WOW_DFS_PHYERR_RADAR_EVENT: |
| return "WOW_DFS_PHYERR_RADAR_EVENT"; |
| case WOW_BEACON_EVENT: |
| return "WOW_BEACON_EVENT"; |
| case WOW_CLIENT_KICKOUT_EVENT: |
| return "WOW_CLIENT_KICKOUT_EVENT"; |
| case WOW_NAN_EVENT: |
| return "WOW_NAN_EVENT"; |
| case WOW_EXTSCAN_EVENT: |
| return "WOW_EXTSCAN_EVENT"; |
| case WOW_IOAC_REV_KA_FAIL_EVENT: |
| return "WOW_IOAC_REV_KA_FAIL_EVENT"; |
| case WOW_IOAC_SOCK_EVENT: |
| return "WOW_IOAC_SOCK_EVENT"; |
| case WOW_NLO_SCAN_COMPLETE_EVENT: |
| return "WOW_NLO_SCAN_COMPLETE_EVENT"; |
| case WOW_NAN_DATA_EVENT: |
| return "WOW_NAN_DATA_EVENT"; |
| case WOW_TDLS_CONN_TRACKER_EVENT: |
| return "WOW_TDLS_CONN_TRACKER_EVENT"; |
| case WOW_OEM_RESPONSE_EVENT: |
| return "WOW_OEM_RESPONSE_EVENT"; |
| case WOW_CHIP_POWER_FAILURE_DETECT_EVENT: |
| return "WOW_CHIP_POWER_FAILURE_DETECT_EVENT"; |
| default: |
| return "UNSPECIFIED_EVENT"; |
| } |
| } |
| |
| /** |
| * wma_add_wow_wakeup_event() - Update WOW wakeup event masks |
| * @wma: WMA context |
| * @event: Event number to add |
| * @enable: 1 to enable and 0 to disable the event |
| * |
| * Sets or clears the bits in enable and disable bitmasks for the |
| * given event number. |
| * |
| * Return: none |
| */ |
| void wma_add_wow_wakeup_event(tp_wma_handle wma, |
| WOW_WAKE_EVENT_TYPE event, |
| bool enable) |
| { |
| uint32_t idx, bit_idx; |
| |
| if (event == 0) { |
| idx = bit_idx = 0; |
| } |
| else { |
| idx = event / WOW_BITMAP_FIELD_SIZE; |
| bit_idx = event % WOW_BITMAP_FIELD_SIZE; |
| } |
| |
| if (enable) { |
| wma->wow_wakeup_enable_mask[idx] |= 1 << bit_idx; |
| wma->wow_wakeup_disable_mask[idx] &= ~(1 << bit_idx); |
| } else { |
| wma->wow_wakeup_disable_mask[idx] |= 1 << bit_idx; |
| wma->wow_wakeup_enable_mask[idx] &= ~(1 << bit_idx); |
| } |
| |
| WMA_LOGD(FL("%s event %s"), |
| enable ? "enable" : "disable", |
| wma_wow_wakeup_event_str(event)); |
| } |
| |
| /** |
| * wma_send_wakeup_mask() - Enable/Disable the wakeup patterns |
| * @wma: WMA Handle |
| * @enable: boolean to enable/disable the pattern in FW |
| * |
| * The API configures the bitmap mask for WoW wakeup patterns. |
| * The Patterns are used to filter out packets in FW during APPS |
| * Power collapse |
| * |
| * Return: 0 on success; else failure |
| */ |
| |
| static VOS_STATUS wma_send_wakeup_mask(tp_wma_handle wma, bool enable) |
| { |
| WMI_WOW_ADD_DEL_EVT_CMD_fixed_param *cmd; |
| u_int16_t len; |
| wmi_buf_t buf; |
| int ret; |
| |
| len = sizeof(WMI_WOW_ADD_DEL_EVT_CMD_fixed_param); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed to allocate buf for wow wakeup mask", |
| __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (WMI_WOW_ADD_DEL_EVT_CMD_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_WOW_ADD_DEL_EVT_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| WMI_WOW_ADD_DEL_EVT_CMD_fixed_param)); |
| cmd->vdev_id = 0; |
| cmd->is_add = enable; |
| |
| if (cmd->is_add) |
| vos_mem_copy(cmd->event_bitmaps, wma->wow_wakeup_enable_mask, |
| WMI_WOW_MAX_EVENT_BM_LEN * sizeof(uint32_t)); |
| else |
| vos_mem_copy(cmd->event_bitmaps, wma->wow_wakeup_disable_mask, |
| WMI_WOW_MAX_EVENT_BM_LEN * sizeof(uint32_t)); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID); |
| if (ret) { |
| WMA_LOGE("Failed to config wow wakeup event"); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("%s Wakeup pattern 0x%x %s in fw", __func__, |
| cmd->event_bitmap, enable ? "enabled":"disabled"); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* Sends WOW patterns to FW. */ |
| static VOS_STATUS wma_send_wow_patterns_to_fw(tp_wma_handle wma, |
| u_int8_t vdev_id, u_int8_t ptrn_id, |
| const u_int8_t *ptrn, const u_int8_t ptrn_len, |
| const u_int8_t ptrn_offset, const u_int8_t *mask, |
| u_int8_t mask_len) |
| |
| { |
| WMI_WOW_ADD_PATTERN_CMD_fixed_param *cmd; |
| WOW_BITMAP_PATTERN_T *bitmap_pattern; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| #ifdef WMA_DUMP_WOW_PTRN |
| u_int8_t pos; |
| u_int8_t *tmp; |
| #endif |
| int32_t len; |
| int ret; |
| |
| len = sizeof(WMI_WOW_ADD_PATTERN_CMD_fixed_param) + |
| WMI_TLV_HDR_SIZE + |
| 1 * sizeof(WOW_BITMAP_PATTERN_T) + |
| WMI_TLV_HDR_SIZE + |
| 0 * sizeof(WOW_IPV4_SYNC_PATTERN_T) + |
| WMI_TLV_HDR_SIZE + |
| 0 * sizeof(WOW_IPV6_SYNC_PATTERN_T) + |
| WMI_TLV_HDR_SIZE + |
| 0 * sizeof(WOW_MAGIC_PATTERN_CMD) + |
| WMI_TLV_HDR_SIZE + |
| 0 * sizeof(A_UINT32) + |
| WMI_TLV_HDR_SIZE + |
| 1 * sizeof(A_UINT32); |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (WMI_WOW_ADD_PATTERN_CMD_fixed_param *)wmi_buf_data(buf); |
| buf_ptr = (u_int8_t *)cmd; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_WOW_ADD_PATTERN_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| WMI_WOW_ADD_PATTERN_CMD_fixed_param)); |
| cmd->vdev_id = vdev_id; |
| cmd->pattern_id = ptrn_id; |
| cmd->pattern_type = WOW_BITMAP_PATTERN; |
| buf_ptr += sizeof(WMI_WOW_ADD_PATTERN_CMD_fixed_param); |
| |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| sizeof(WOW_BITMAP_PATTERN_T)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| bitmap_pattern = (WOW_BITMAP_PATTERN_T *)buf_ptr; |
| |
| WMITLV_SET_HDR(&bitmap_pattern->tlv_header, |
| WMITLV_TAG_STRUC_WOW_BITMAP_PATTERN_T, |
| WMITLV_GET_STRUCT_TLVLEN(WOW_BITMAP_PATTERN_T)); |
| |
| vos_mem_copy(&bitmap_pattern->patternbuf[0], ptrn, ptrn_len); |
| vos_mem_copy(&bitmap_pattern->bitmaskbuf[0], mask, mask_len); |
| |
| bitmap_pattern->pattern_offset = ptrn_offset; |
| bitmap_pattern->pattern_len = ptrn_len; |
| |
| if(bitmap_pattern->pattern_len > WOW_DEFAULT_BITMAP_PATTERN_SIZE) |
| bitmap_pattern->pattern_len = WOW_DEFAULT_BITMAP_PATTERN_SIZE; |
| |
| if(bitmap_pattern->pattern_len > WOW_DEFAULT_BITMASK_SIZE) |
| bitmap_pattern->pattern_len = WOW_DEFAULT_BITMASK_SIZE; |
| |
| bitmap_pattern->bitmask_len = bitmap_pattern->pattern_len; |
| bitmap_pattern->pattern_id = ptrn_id; |
| |
| WMA_LOGD("vdev id : %d, ptrn id: %d, ptrn len: %d, ptrn offset: %d", |
| cmd->vdev_id, cmd->pattern_id, bitmap_pattern->pattern_len, |
| bitmap_pattern->pattern_offset); |
| |
| #ifdef WMA_DUMP_WOW_PTRN |
| printk("Pattern : "); |
| tmp = (u_int8_t *) &bitmap_pattern->patternbuf[0]; |
| for (pos = 0; pos < bitmap_pattern->pattern_len; pos++) |
| printk("%02X ", tmp[pos]); |
| |
| printk("\nMask : "); |
| tmp = (u_int8_t *) &bitmap_pattern->bitmaskbuf[0]; |
| for (pos = 0; pos < bitmap_pattern->pattern_len; pos++) |
| printk("%02X ", tmp[pos]); |
| #endif |
| |
| buf_ptr += sizeof(WOW_BITMAP_PATTERN_T); |
| |
| /* Fill TLV for WMITLV_TAG_STRUC_WOW_IPV4_SYNC_PATTERN_T but no data. */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, 0); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| /* Fill TLV for WMITLV_TAG_STRUC_WOW_IPV6_SYNC_PATTERN_T but no data. */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, 0); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| /* Fill TLV for WMITLV_TAG_STRUC_WOW_MAGIC_PATTERN_CMD but no data. */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, 0); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| /* Fill TLV for pattern_info_timeout but no data. */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_UINT32, 0); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| /* Fill TLV for ra_ratelimit_interval with dummy data as this fix elem*/ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_UINT32, 1 * sizeof(A_UINT32)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| *(A_UINT32 *)buf_ptr = 0; |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_WOW_ADD_WAKE_PATTERN_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send wow ptrn to fw", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* Sends delete pattern request to FW for given pattern ID on particular vdev */ |
| static VOS_STATUS wma_del_wow_pattern_in_fw(tp_wma_handle wma, |
| u_int8_t ptrn_id) |
| { |
| WMI_WOW_DEL_PATTERN_CMD_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len; |
| int ret; |
| |
| len = sizeof(WMI_WOW_DEL_PATTERN_CMD_fixed_param); |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (WMI_WOW_DEL_PATTERN_CMD_fixed_param *) wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_WOW_DEL_PATTERN_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| WMI_WOW_DEL_PATTERN_CMD_fixed_param)); |
| cmd->vdev_id = 0; |
| cmd->pattern_id = ptrn_id; |
| cmd->pattern_type = WOW_BITMAP_PATTERN; |
| |
| WMA_LOGD("Deleting pattern id: %d in fw", cmd->pattern_id); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_WOW_DEL_WAKE_PATTERN_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to delete wow ptrn from fw", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| #ifdef FEATURE_WLAN_D0WOW |
| void wma_set_d0wow_flag(tp_wma_handle wma_handle, A_BOOL flag) |
| { |
| atomic_set(&wma_handle->in_d0wow, flag); |
| } |
| |
| A_BOOL wma_read_d0wow_flag(tp_wma_handle wma_handle) |
| { |
| return atomic_read(&wma_handle->in_d0wow); |
| } |
| |
| /* Enable D0-WOW in firmware. */ |
| VOS_STATUS wma_enable_d0wow_in_fw(tp_wma_handle wma) |
| { |
| wmi_d0_wow_enable_disable_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len; |
| int host_credits; |
| int wmi_pending_cmds; |
| int ret = 0; |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| |
| len = sizeof(wmi_d0_wow_enable_disable_cmd_fixed_param); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed to allocate WMI buffer!", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (wmi_d0_wow_enable_disable_cmd_fixed_param *)wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_d0_wow_enable_disable_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_d0_wow_enable_disable_cmd_fixed_param)); |
| cmd->enable = 1; |
| |
| vos_event_reset(&wma->target_suspend); |
| wma->wow_nack = 0; |
| |
| host_credits = wmi_get_host_credits(wma->wmi_handle); |
| wmi_pending_cmds = wmi_get_pending_cmds(wma->wmi_handle); |
| if (host_credits < WMI_WOW_REQUIRED_CREDITS) { |
| WMA_LOGE("%s: Not enough credits to post " |
| "WMI_D0_WOW_ENABLE_DISABLE_CMDID, try anyway! " |
| "Credits: %d, pending_cmds: %d", __func__, |
| host_credits, wmi_pending_cmds); |
| } |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_D0_WOW_ENABLE_DISABLE_CMDID); |
| if (ret) { |
| WMA_LOGE("Failed to enable D0-WOW in FW!"); |
| goto error; |
| } |
| |
| vos_status = vos_wait_single_event(&wma->target_suspend, |
| WMA_TGT_SUSPEND_COMPLETE_TIMEOUT); |
| if (VOS_STATUS_SUCCESS != vos_status) { |
| WMA_LOGE("Failed to receive D0-WoW enable HTC ACK from FW! " |
| "Credits: %d, pending_cmds: %d", |
| wmi_get_host_credits(wma->wmi_handle), |
| wmi_get_pending_cmds(wma->wmi_handle)); |
| |
| if (vos_is_logp_in_progress(VOS_MODULE_ID_WDA, NULL)) { |
| VOS_ASSERT(0); |
| return VOS_STATUS_E_FAILURE; |
| } else { |
| VOS_BUG(0); |
| return VOS_STATUS_E_FAILURE; |
| } |
| } |
| |
| if (wma->wow_nack) { |
| WMA_LOGE("FW not ready for D0WOW."); |
| return VOS_STATUS_E_AGAIN; |
| } |
| |
| host_credits = wmi_get_host_credits(wma->wmi_handle); |
| wmi_pending_cmds = wmi_get_pending_cmds(wma->wmi_handle); |
| if (host_credits < WMI_WOW_REQUIRED_CREDITS) { |
| WMA_LOGE("%s: No credits after HTC ACK: %d, pending_cmds: %d, " |
| "cannot resume back!", __func__, host_credits, |
| wmi_pending_cmds); |
| HTC_dump_counter_info(wma->htc_handle); |
| } |
| |
| wma->wow.wow_enable_cmd_sent = TRUE; |
| wmi_set_d0wow_flag(wma->wmi_handle, TRUE); |
| wma_set_d0wow_flag(wma, TRUE); |
| WMA_LOGD("D0-WOW is enabled successfully in FW."); |
| return vos_status; |
| |
| error: |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| #endif /* FEATURE_WLAN_D0WOW */ |
| |
| /* Enables WOW in firmware. */ |
| int wma_enable_wow_in_fw(WMA_HANDLE handle, int runtime_pm) |
| { |
| tp_wma_handle wma = handle; |
| wmi_wow_enable_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len; |
| int ret; |
| struct ol_softc *scn; |
| int host_credits; |
| int wmi_pending_cmds; |
| #ifdef CONFIG_CNSS |
| tpAniSirGlobal pMac = (tpAniSirGlobal)vos_get_context(VOS_MODULE_ID_PE, |
| wma->vos_context); |
| |
| if (NULL == pMac) { |
| WMA_LOGE("%s: Unable to get PE context", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| #endif |
| |
| #ifdef FEATURE_WLAN_D0WOW |
| if (wma->ap_client_cnt > 0) { |
| WMA_LOGD("Entering D0-WOW since client count is %d.", |
| wma->ap_client_cnt); |
| return wma_enable_d0wow_in_fw(wma); |
| } |
| #endif |
| |
| len = sizeof(wmi_wow_enable_cmd_fixed_param); |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (wmi_wow_enable_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_wow_enable_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_wow_enable_cmd_fixed_param)); |
| cmd->enable = TRUE; |
| |
| vos_event_reset(&wma->target_suspend); |
| vos_event_reset(&wma->wow_tx_complete); |
| wma->wow_nack = 0; |
| |
| host_credits = wmi_get_host_credits(wma->wmi_handle); |
| wmi_pending_cmds = wmi_get_pending_cmds(wma->wmi_handle); |
| |
| WMA_LOGD("Credits:%d; Pending_Cmds: %d", |
| host_credits, wmi_pending_cmds); |
| |
| #if !defined(HIF_SDIO) |
| if (!runtime_pm && host_credits < WMI_WOW_REQUIRED_CREDITS) { |
| WMA_LOGE("%s: Not enough credits but trying to send WoW enable" |
| " anyway! Credits:%d, pending_cmds:%d\n", __func__, |
| host_credits, wmi_pending_cmds); |
| } |
| #endif |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_WOW_ENABLE_CMDID); |
| if (ret) { |
| WMA_LOGE("Failed to enable wow in fw"); |
| goto error; |
| } |
| |
| wmi_set_target_suspend(wma->wmi_handle, TRUE); |
| |
| if (vos_wait_single_event(&wma->target_suspend, |
| WMA_TGT_SUSPEND_COMPLETE_TIMEOUT) |
| != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to receive WoW Enable Ack from FW"); |
| if (wma_did_ssr_happen(wma)) { |
| WMA_LOGE("%s: SSR happened while waiting for response", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| WMA_LOGE("Credits:%d; Pending_Cmds: %d", |
| wmi_get_host_credits(wma->wmi_handle), |
| wmi_get_pending_cmds(wma->wmi_handle)); |
| wmi_set_target_suspend(wma->wmi_handle, FALSE); |
| if (!vos_is_logp_in_progress(VOS_MODULE_ID_VOSS, NULL)) { |
| #ifdef CONFIG_CNSS |
| if (pMac->sme.enableSelfRecovery) { |
| vos_trigger_recovery(false); |
| } else { |
| vos_force_fw_dump(); |
| } |
| #else |
| vos_force_fw_dump(); |
| #endif |
| } else { |
| WMA_LOGE("%s: LOGP is in progress, ignore!", __func__); |
| } |
| |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| if (wma->wow_nack) { |
| WMA_LOGE("FW not ready to WOW"); |
| wmi_set_target_suspend(wma->wmi_handle, FALSE); |
| return VOS_STATUS_E_AGAIN; |
| } |
| |
| host_credits = wmi_get_host_credits(wma->wmi_handle); |
| wmi_pending_cmds = wmi_get_pending_cmds(wma->wmi_handle); |
| |
| if (host_credits < WMI_WOW_REQUIRED_CREDITS) { |
| WMA_LOGE("%s: No Credits after HTC ACK:%d, pending_cmds:%d, " |
| "cannot resume back", __func__, host_credits, wmi_pending_cmds); |
| HTC_dump_counter_info(wma->htc_handle); |
| if (!vos_is_logp_in_progress(VOS_MODULE_ID_HIF, NULL)) |
| VOS_BUG(0); |
| else |
| WMA_LOGE("%s: SSR in progress, ignore no credit issue", __func__); |
| } |
| |
| |
| WMA_LOGD("WOW enabled successfully in fw: credits:%d" |
| "pending_cmds: %d", host_credits, wmi_pending_cmds); |
| |
| scn = vos_get_context(VOS_MODULE_ID_HIF, wma->vos_context); |
| |
| if (scn == NULL) { |
| WMA_LOGE("%s: Failed to get HIF context", __func__); |
| VOS_ASSERT(0); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| wma->wow.wow_enable_cmd_sent = TRUE; |
| |
| return VOS_STATUS_SUCCESS; |
| |
| error: |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| /* Sends user configured WOW patterns to the firmware. */ |
| static VOS_STATUS wma_wow_usr(tp_wma_handle wma, u_int8_t vdev_id, |
| u_int8_t *enable_ptrn_match) |
| { |
| struct wma_wow_ptrn_cache *cache; |
| VOS_STATUS ret = VOS_STATUS_SUCCESS; |
| u_int8_t new_mask[SIR_WOWL_BCAST_PATTERN_MAX_SIZE]; |
| u_int8_t bit_to_check, ptrn_id, pos; |
| |
| WMA_LOGD("Configuring user wow patterns for vdev %d", vdev_id); |
| |
| for (ptrn_id = 0; ptrn_id < WOW_MAX_BITMAP_FILTERS; ptrn_id++) { |
| cache = wma->wow.cache[ptrn_id]; |
| if (!cache) |
| continue; |
| |
| if (cache->vdev_id != vdev_id) |
| continue; |
| /* |
| * Convert received pattern mask value from bit representaion |
| * to byte representation. |
| * |
| * For example, received value from umac, |
| * |
| * Mask value : A1 (equivalent binary is "1010 0001") |
| * Pattern value : 12:00:13:00:00:00:00:44 |
| * |
| * The value which goes to FW after the conversion from this |
| * function (1 in mask value will become FF and 0 will |
| * become 00), |
| * |
| * Mask value : FF:00:FF:00:0:00:00:FF |
| * Pattern value : 12:00:13:00:00:00:00:44 |
| */ |
| vos_mem_zero(new_mask, sizeof(new_mask)); |
| for (pos = 0; pos < cache->ptrn_len; pos++) { |
| bit_to_check = (WMA_NUM_BITS_IN_BYTE - 1) - |
| (pos % WMA_NUM_BITS_IN_BYTE); |
| bit_to_check = 0x1 << bit_to_check; |
| if (cache->mask[pos / WMA_NUM_BITS_IN_BYTE] & bit_to_check) |
| new_mask[pos] = WMA_WOW_PTRN_MASK_VALID; |
| } |
| |
| ret = wma_send_wow_patterns_to_fw(wma, vdev_id, ptrn_id, |
| cache->ptrn, cache->ptrn_len, |
| cache->ptrn_offset, new_mask, |
| cache->ptrn_len); |
| if (ret != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to submit wow pattern to fw (ptrn_id %d)", |
| ptrn_id); |
| break; |
| } |
| } |
| |
| *enable_ptrn_match = 1 << vdev_id; |
| return ret; |
| } |
| |
| /* Configures default WOW pattern for the given vdev_id which is in AP mode. */ |
| static VOS_STATUS wma_wow_ap(tp_wma_handle wma, u_int8_t vdev_id, |
| u_int8_t *enable_ptrn_match) |
| { |
| static const u_int8_t arp_ptrn[] = { 0x08, 0x06 }; |
| static const u_int8_t arp_mask[] = { 0xff, 0xff }; |
| static const u_int8_t arp_offset = 20; |
| VOS_STATUS ret; |
| |
| /* Setup all ARP pkt pattern. This is dummy pattern hence the lenght |
| is zero */ |
| ret = wma_send_wow_patterns_to_fw(wma, vdev_id, |
| wma->wow.free_ptrn_id[wma->wow.used_free_ptrn_id++], |
| arp_ptrn, 0, arp_offset, |
| arp_mask, 0); |
| if (ret != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to add WOW ARP pattern"); |
| return ret; |
| } |
| |
| *enable_ptrn_match = 1 << vdev_id; |
| return ret; |
| } |
| |
| #ifdef FEATURE_WLAN_RA_FILTERING |
| static VOS_STATUS wma_wow_sta_ra_filter(tp_wma_handle wma, u_int8_t vdev_id) |
| { |
| |
| WMI_WOW_ADD_PATTERN_CMD_fixed_param *cmd; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| int32_t len; |
| int ret; |
| |
| len = sizeof(WMI_WOW_ADD_PATTERN_CMD_fixed_param) + |
| WMI_TLV_HDR_SIZE + |
| 0 * sizeof(WOW_BITMAP_PATTERN_T) + |
| WMI_TLV_HDR_SIZE + |
| 0 * sizeof(WOW_IPV4_SYNC_PATTERN_T) + |
| WMI_TLV_HDR_SIZE + |
| 0 * sizeof(WOW_IPV6_SYNC_PATTERN_T) + |
| WMI_TLV_HDR_SIZE + |
| 0 * sizeof(WOW_MAGIC_PATTERN_CMD) + |
| WMI_TLV_HDR_SIZE + |
| 0 * sizeof(A_UINT32) + |
| WMI_TLV_HDR_SIZE + |
| 1 * sizeof(A_UINT32); |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (WMI_WOW_ADD_PATTERN_CMD_fixed_param *)wmi_buf_data(buf); |
| buf_ptr = (u_int8_t *)cmd; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_WOW_ADD_PATTERN_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| WMI_WOW_ADD_PATTERN_CMD_fixed_param)); |
| cmd->vdev_id = vdev_id; |
| cmd->pattern_id = 0; |
| cmd->pattern_type = WOW_IPV6_RA_PATTERN; |
| buf_ptr += sizeof(WMI_WOW_ADD_PATTERN_CMD_fixed_param); |
| |
| /* Fill TLV for WMITLV_TAG_STRUC_WOW_BITMAP_PATTERN_T but no data. */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, 0); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| /* Fill TLV for WMITLV_TAG_STRUC_WOW_IPV4_SYNC_PATTERN_T but no data. */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, 0); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| /* Fill TLV for WMITLV_TAG_STRUC_WOW_IPV6_SYNC_PATTERN_T but no data. */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, 0); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| /* Fill TLV for WMITLV_TAG_STRUC_WOW_MAGIC_PATTERN_CMD but no data. */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, 0); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| /* Fill TLV for pattern_info_timeout but no data. */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_UINT32, 0); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| /* Fill TLV for ra_ratelimit_interval. */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_UINT32, sizeof(A_UINT32)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| |
| *((A_UINT32 *)buf_ptr) = wma->RArateLimitInterval; |
| |
| WMA_LOGD("%s: send RA rate limit [%d] to fw vdev = %d", __func__, |
| wma->RArateLimitInterval, vdev_id); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_WOW_ADD_WAKE_PATTERN_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send RA rate limit to fw", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| |
| } |
| #endif /* FEATURE_WLAN_RA_FILTERING */ |
| |
| /** |
| * wma_configure_wow_ssdp() - API to configure WoW SSDP |
| * @wma: WMA Handle |
| * @vdev_id: Vdev Id |
| * |
| * API to configure SSDP pattern as WoW pattern |
| * |
| * Return: Success/Failure |
| */ |
| static VOS_STATUS wma_configure_wow_ssdp(tp_wma_handle wma, uint8_t vdev_id) |
| { |
| VOS_STATUS status = VOS_STATUS_SUCCESS; |
| static const uint8_t discvr_ptrn[] = { 0xe0, 0x00, 0x00, 0xf8 }; |
| static const uint8_t discvr_mask[] = { 0xf0, 0x00, 0x00, 0xf8 }; |
| static const uint8_t discvr_offset = 30; |
| |
| status = wma_send_wow_patterns_to_fw(wma, vdev_id, |
| wma->wow.free_ptrn_id[wma-> |
| wow.used_free_ptrn_id++], |
| discvr_ptrn, sizeof(discvr_ptrn), |
| discvr_offset, discvr_mask, |
| sizeof(discvr_ptrn)); |
| if (status != VOS_STATUS_SUCCESS) |
| WMA_LOGE("Failed to add WOW mDNS/SSDP/LLMNR pattern"); |
| |
| return status; |
| } |
| |
| /** |
| * wma_configure_mc_ssdp() - API to configure SSDP address as MC list |
| * @wma: WMA Handle |
| * @vdev_id: Vdev Id |
| * |
| * SSDP address 239.255.255.250 is converted to Multicast Mac address |
| * and configure it to FW. Firmware will apply this pattern on the incoming |
| * packets to filter them out during chatter/wow mode. |
| * |
| * Return: Success/Failure |
| */ |
| static VOS_STATUS wma_configure_mc_ssdp(tp_wma_handle wma, uint8_t vdev_id) |
| { |
| WMI_SET_MCASTBCAST_FILTER_CMD_fixed_param *cmd; |
| wmi_buf_t buf; |
| const tSirMacAddr ssdp_addr = {0x01, 0x00, 0x5e, 0x7f, 0xff, 0xfa}; |
| int ret; |
| uint32_t tag = |
| WMITLV_TAG_STRUC_WMI_SET_MCASTBCAST_FILTER_CMD_fixed_param; |
| |
| WMI_SET_MCASTBCAST_FILTER_CMD_fixed_param fixed_param; |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, sizeof(*cmd)); |
| if (!buf) { |
| WMA_LOGE("%s No Memory for MC address", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (WMI_SET_MCASTBCAST_FILTER_CMD_fixed_param *) wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, tag, |
| WMITLV_GET_STRUCT_TLVLEN(fixed_param)); |
| |
| cmd->action = WMI_MCAST_FILTER_SET; |
| cmd->vdev_id = vdev_id; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(ssdp_addr, &cmd->mcastbdcastaddr); |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, sizeof(*cmd), |
| WMI_SET_MCASTBCAST_FILTER_CMDID); |
| if (ret != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s Failed to configure FW with SSDP MC address", |
| __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_configure_ssdp() - API to Configure SSDP pattern to FW |
| * @wma: WMA Handle |
| * @vdev_id: Vdev Id |
| * |
| * Setup multicast pattern for mDNS 224.0.0.251, |
| * SSDP 239.255.255.250 and LLMNR 224.0.0.252 |
| * |
| * Return: Success/Failure. |
| */ |
| static VOS_STATUS wma_configure_ssdp(tp_wma_handle wma, uint8_t vdev_id) |
| { |
| if (!wma->ssdp) { |
| WMA_LOGD("mDNS, SSDP, LLMNR patterns are disabled from ini"); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| WMA_LOGD("%s, enable_mc_list:%d", __func__, wma->enable_mc_list); |
| |
| if (wma->enable_mc_list) |
| return wma_configure_mc_ssdp(wma, vdev_id); |
| else |
| return wma_configure_wow_ssdp(wma, vdev_id); |
| } |
| |
| /* Configures default WOW pattern for the given vdev_id which is in STA mode. */ |
| static VOS_STATUS wma_wow_sta(tp_wma_handle wma, u_int8_t vdev_id, |
| u_int8_t *enable_ptrn_match, bool runtime_pm) |
| { |
| u_int8_t mac_mask[ETH_ALEN], free_slot; |
| VOS_STATUS ret = VOS_STATUS_SUCCESS; |
| static const u_int8_t arp_ptrn[] = { 0x08, 0x06 }; |
| static const u_int8_t arp_mask[] = { 0xff, 0xff }; |
| static const u_int8_t arp_offset = 12; |
| static const u_int8_t ns_ptrn[] = {0x86, 0xDD}; |
| static const u_int8_t bcst_ptrn[] = |
| { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; |
| static const u_int8_t bcst_mask[] = |
| { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; |
| static const u_int8_t bcst_offset = 0; |
| |
| free_slot = wma->wow.total_free_ptrn_id - wma->wow.used_free_ptrn_id ; |
| |
| if (free_slot < WMA_STA_WOW_DEFAULT_PTRN_MAX) { |
| WMA_LOGD("Free slots are not enough, avail:%d, need: %d", |
| free_slot, WMA_STA_WOW_DEFAULT_PTRN_MAX); |
| WMA_LOGD("Ignoring default STA mode wow pattern for vdev : %d", |
| vdev_id); |
| return ret; |
| } |
| |
| WMA_LOGD("Configuring default STA mode wow pattern for vdev %d", |
| vdev_id); |
| |
| /* Setup unicast pkt pattern */ |
| vos_mem_set(&mac_mask, ETH_ALEN, 0xFF); |
| ret = wma_send_wow_patterns_to_fw(wma, vdev_id, |
| wma->wow.free_ptrn_id[wma->wow.used_free_ptrn_id++], |
| wma->interfaces[vdev_id].addr, ETH_ALEN, 0, |
| mac_mask, ETH_ALEN); |
| if (ret != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to add WOW unicast pattern"); |
| return ret; |
| } |
| |
| if (runtime_pm && wma->enable_bcst_ptrn) { |
| ret = wma_send_wow_patterns_to_fw(wma, vdev_id, |
| wma->wow.free_ptrn_id[wma->wow.used_free_ptrn_id++], |
| bcst_ptrn, sizeof(bcst_ptrn), bcst_offset, |
| bcst_mask, sizeof(bcst_mask)); |
| if (ret != VOS_STATUS_SUCCESS) |
| WMA_LOGE("Failed to add BCAST wakeup pattern"); |
| } |
| |
| ret = wma_configure_ssdp(wma, vdev_id); |
| if (ret != VOS_STATUS_SUCCESS) |
| WMA_LOGE("Failed to configure SSDP patterns to FW"); |
| |
| /* when arp offload or ns offloaded is disabled |
| * from ini file, configure broad cast arp pattern |
| * to fw, so that host can wake up |
| */ |
| if (runtime_pm || !(wma->ol_ini_info & 0x1)) { |
| /* Setup all ARP pkt pattern */ |
| ret = wma_send_wow_patterns_to_fw(wma, vdev_id, |
| wma->wow.free_ptrn_id[wma->wow.used_free_ptrn_id++], |
| arp_ptrn, sizeof(arp_ptrn), arp_offset, |
| arp_mask, sizeof(arp_mask)); |
| if (ret != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to add WOW ARP pattern"); |
| return ret; |
| } |
| } |
| |
| /* for NS or NDP offload packets */ |
| if (runtime_pm || !(wma->ol_ini_info & 0x2)) { |
| /* Setup all NS pkt pattern */ |
| ret = wma_send_wow_patterns_to_fw(wma, vdev_id, |
| wma->wow.free_ptrn_id[wma->wow.used_free_ptrn_id++], |
| ns_ptrn, sizeof(arp_ptrn), arp_offset, |
| arp_mask, sizeof(arp_mask)); |
| if (ret != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to add WOW NS pattern"); |
| return ret; |
| } |
| |
| } |
| |
| *enable_ptrn_match = 1 << vdev_id; |
| return ret; |
| } |
| |
| /* Finds out list of unused slots in wow pattern cache. Those free slots number |
| * can be used as pattern ID while configuring default wow pattern. */ |
| static void wma_update_free_wow_ptrn_id(tp_wma_handle wma) |
| { |
| struct wma_wow_ptrn_cache *cache; |
| u_int8_t ptrn_id; |
| |
| vos_mem_zero(wma->wow.free_ptrn_id, sizeof(wma->wow.free_ptrn_id)); |
| wma->wow.total_free_ptrn_id = 0; |
| wma->wow.used_free_ptrn_id = 0; |
| |
| for (ptrn_id = 0; ptrn_id < wma->wlan_resource_config.num_wow_filters; |
| ptrn_id++) { |
| cache = wma->wow.cache[ptrn_id]; |
| if (!cache) { |
| wma->wow.free_ptrn_id[wma->wow.total_free_ptrn_id] = |
| ptrn_id; |
| wma->wow.total_free_ptrn_id += 1; |
| |
| } |
| } |
| |
| /* |
| * Clear the wakeup pattern mask to ensure, we configure the |
| * wakeup patterns properly to FW. |
| */ |
| |
| vos_mem_zero(wma->wow_wakeup_enable_mask, |
| sizeof(wma->wow_wakeup_enable_mask)); |
| vos_mem_zero(wma->wow_wakeup_disable_mask, |
| sizeof(wma->wow_wakeup_enable_mask)); |
| WMA_LOGD("Total free wow pattern id for default patterns: %d", |
| wma->wow.total_free_ptrn_id ); |
| } |
| |
| /* Returns true if the user configured any wow pattern for given vdev id */ |
| static bool wma_is_wow_prtn_cached(tp_wma_handle wma, u_int8_t vdev_id) |
| { |
| struct wma_wow_ptrn_cache *cache; |
| u_int8_t ptrn_id; |
| |
| for (ptrn_id = 0; ptrn_id < WOW_MAX_BITMAP_FILTERS; ptrn_id++) { |
| cache = wma->wow.cache[ptrn_id]; |
| if (!cache) |
| continue; |
| |
| if (cache->vdev_id == vdev_id) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /* Unpause all the vdev after resume */ |
| static void wma_unpause_vdev(tp_wma_handle wma) { |
| int8_t vdev_id; |
| struct wma_txrx_node *iface; |
| |
| for (vdev_id = 0; vdev_id < wma->max_bssid; vdev_id++) { |
| if (!wma->interfaces[vdev_id].handle) |
| continue; |
| |
| #if defined(CONFIG_HL_SUPPORT) || defined(QCA_SUPPORT_TXRX_VDEV_PAUSE_LL) |
| /* When host resume, by default, unpause all active vdev */ |
| if (wma->interfaces[vdev_id].pause_bitmap) { |
| wdi_in_vdev_unpause(wma->interfaces[vdev_id].handle, |
| 0xffffffff); |
| wma->interfaces[vdev_id].pause_bitmap = 0; |
| } |
| #endif /* QCA_SUPPORT_TXRX_VDEV_PAUSE_LL || CONFIG_HL_SUPPORT */ |
| |
| iface = &wma->interfaces[vdev_id]; |
| iface->conn_state = FALSE; |
| } |
| } |
| |
| static VOS_STATUS wma_resume_req(tp_wma_handle wma, bool runtime_pm) |
| { |
| VOS_STATUS ret = VOS_STATUS_E_AGAIN; |
| u_int8_t ptrn_id; |
| |
| if (runtime_pm) |
| goto skip_vdev_suspend; |
| |
| wma->no_of_resume_ind++; |
| |
| if (wma->no_of_resume_ind < wma_get_vdev_count(wma)) |
| return VOS_STATUS_SUCCESS; |
| |
| wma->no_of_resume_ind = 0; |
| |
| skip_vdev_suspend: |
| WMA_LOGD("Clearing already configured wow patterns in fw%s," |
| " wow_enable: %d, wow_enable_cmd_sent: %d", |
| runtime_pm ? " for runtime PM" : "", |
| wma->wow.wow_enable, wma->wow.wow_enable_cmd_sent); |
| |
| if (wma->wow.wow_enable_cmd_sent) { |
| WMA_LOGD("Firmware is still in WoW mode, don't delete WoW" |
| " patterns"); |
| VOS_ASSERT(0); |
| return ret; |
| } |
| |
| if (!wma->wow.wow_enable) { |
| WMA_LOGD("WoW pattern not configured in FW during suspend," |
| " skip delete!"); |
| ret = VOS_STATUS_SUCCESS; |
| goto pdev_resume; |
| } |
| |
| /* Clear existing wow patterns in FW. */ |
| for (ptrn_id = 0; ptrn_id < wma->wlan_resource_config.num_wow_filters; |
| ptrn_id++) { |
| ret = wma_del_wow_pattern_in_fw(wma, ptrn_id); |
| if (ret != VOS_STATUS_SUCCESS) |
| goto end; |
| } |
| |
| end: |
| wma->wow.wow_enable = FALSE; |
| /* Reset the DTIM Parameters */ |
| wma_set_resume_dtim(wma); |
| pdev_resume: |
| wmi_set_runtime_pm_inprogress(wma->wmi_handle, FALSE); |
| /* need to reset if hif_pci_suspend_fails */ |
| wma_set_wow_bus_suspend(wma, 0); |
| /* unpause the vdev if left paused and hif_pci_suspend fails */ |
| wma_unpause_vdev(wma); |
| |
| if (runtime_pm) |
| vos_runtime_pm_allow_suspend(wma->runtime_context.resume); |
| |
| return ret; |
| } |
| |
| /** |
| * wma_feed_allowed_action_frame_patterns() - config action frame map to fw |
| * @wma: wma handler |
| * |
| * This is called to push action frames wow patterns from local |
| * cache to firmware. |
| * |
| * Return: VOS_STATUS |
| */ |
| static VOS_STATUS wma_feed_allowed_action_frame_patterns(tp_wma_handle wma) |
| { |
| WMI_WOW_SET_ACTION_WAKE_UP_CMD_fixed_param *cmd; |
| u_int16_t len; |
| wmi_buf_t buf; |
| int ret; |
| int i; |
| uint8_t *buf_ptr; |
| uint32_t *cmd_args; |
| |
| len = sizeof(WMI_WOW_SET_ACTION_WAKE_UP_CMD_fixed_param) + |
| WMI_TLV_HDR_SIZE + (MAX_SUPPORTED_ACTION_CATEGORY * |
| sizeof(A_UINT32)); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed to allocate buf for wow action frame map", |
| __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (WMI_WOW_SET_ACTION_WAKE_UP_CMD_fixed_param *) wmi_buf_data(buf); |
| buf_ptr = (uint8_t *)cmd; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_wow_set_action_wake_up_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| WMI_WOW_SET_ACTION_WAKE_UP_CMD_fixed_param)); |
| cmd->vdev_id = 0; |
| cmd->operation = wma->allowed_action_frames.operation; |
| |
| for (i = 0; i < MAX_SUPPORTED_ACTION_CATEGORY_ELE_LIST; i++) { |
| if (i < (SIR_MAC_ACTION_MAX / 32)) |
| cmd->action_category_map[i] = |
| wma->allowed_action_frames.action_category_map[i]; |
| else |
| cmd->action_category_map[i] = 0; |
| |
| WMA_LOGD("%s: %d action Wakeup pattern 0x%x in fw", |
| __func__, i, cmd->action_category_map[i]); |
| } |
| |
| buf_ptr += sizeof(WMI_WOW_SET_ACTION_WAKE_UP_CMD_fixed_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_UINT32, |
| (MAX_SUPPORTED_ACTION_CATEGORY * sizeof(A_UINT32))); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| cmd_args = (uint32_t *) buf_ptr; |
| for (i = 0; i < MAX_SUPPORTED_ACTION_CATEGORY; i++) |
| cmd_args[i] = wma->allowed_action_frames.action_per_category[i]; |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_WOW_SET_ACTION_WAKE_UP_CMDID); |
| if (ret) { |
| WMA_LOGE("Failed to config wow action frame map, ret %d", ret); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* |
| * Pushes wow patterns from local cache to FW and configures |
| * wakeup trigger events. |
| */ |
| static VOS_STATUS wma_feed_wow_config_to_fw(tp_wma_handle wma, |
| v_BOOL_t pno_in_progress, |
| bool extscan_in_progress, bool pno_matched, |
| bool runtime_pm) |
| { |
| struct wma_txrx_node *iface; |
| VOS_STATUS ret = VOS_STATUS_SUCCESS; |
| u_int8_t vdev_id; |
| u_int8_t enable_ptrn_match = 0; |
| v_BOOL_t ap_vdev_available = FALSE; |
| #ifdef QCA_IBSS_SUPPORT |
| v_BOOL_t ibss_vdev_available = FALSE; |
| #endif |
| bool wps_enable = false; |
| |
| if (wma->wow.wow_enable) { |
| WMA_LOGD("Already%s Fatal Error!", |
| runtime_pm ? " runtime suspended" : " cfg suspended"); |
| VOS_BUG(0); |
| return VOS_STATUS_E_AGAIN; |
| } |
| |
| /* Gather list of free ptrn id. This is needed while configuring |
| * default wow patterns. |
| */ |
| wma_update_free_wow_ptrn_id(wma); |
| |
| for (vdev_id = 0; vdev_id < wma->max_bssid; vdev_id++) { |
| iface = &wma->interfaces[vdev_id]; |
| |
| if (!iface->handle || |
| !iface->ptrn_match_enable || |
| (!(wma_is_vdev_in_ap_mode(wma, vdev_id) |
| #ifdef QCA_IBSS_SUPPORT |
| || wma_is_vdev_in_ibss_mode(wma, vdev_id) |
| #endif |
| ) && !iface->conn_state)) |
| continue; |
| |
| if (wma_is_vdev_in_ap_mode(wma, vdev_id) |
| #ifdef QCA_IBSS_SUPPORT |
| || wma_is_vdev_in_ibss_mode(wma, vdev_id) |
| #endif |
| ) { |
| ap_vdev_available = TRUE; |
| if (SAP_WPS_DISABLED != iface->wps_state) |
| wps_enable = true; |
| } |
| |
| #ifdef QCA_IBSS_SUPPORT |
| if (wma_is_vdev_in_ibss_mode(wma, vdev_id)) |
| ibss_vdev_available = TRUE; |
| #endif |
| |
| if (wma_is_wow_prtn_cached(wma, vdev_id)) { |
| /* Configure wow patterns provided by the user */ |
| ret = wma_wow_usr(wma, vdev_id, &enable_ptrn_match); |
| } else if (wma_is_vdev_in_ap_mode(wma, vdev_id) |
| #ifdef QCA_IBSS_SUPPORT |
| ||wma_is_vdev_in_ibss_mode(wma, vdev_id) |
| #endif |
| ) |
| { |
| /* Configure AP mode default wow patterns */ |
| ret = wma_wow_ap(wma, vdev_id, &enable_ptrn_match); |
| } |
| else |
| { |
| /* Configure STA mode default wow patterns */ |
| ret = wma_wow_sta(wma, vdev_id, &enable_ptrn_match, |
| runtime_pm); |
| } |
| |
| #ifdef FEATURE_WLAN_RA_FILTERING |
| if ((ap_vdev_available == FALSE) && (wma->IsRArateLimitEnabled)) |
| { |
| ret = wma_wow_sta_ra_filter(wma, vdev_id); |
| |
| } |
| |
| #endif |
| if (ret != VOS_STATUS_SUCCESS) |
| goto end; |
| } |
| |
| /* |
| * Configure csa ie wakeup event. |
| */ |
| wma_add_wow_wakeup_event(wma, WOW_CSA_IE_EVENT, TRUE); |
| |
| wma_add_wow_wakeup_event(wma, WOW_CLIENT_KICKOUT_EVENT, TRUE); |
| |
| /* |
| * Configure pattern match wakeup event. FW does pattern match |
| * only if pattern match event is enabled. |
| */ |
| wma_add_wow_wakeup_event(wma, WOW_PATTERN_MATCH_EVENT, |
| enable_ptrn_match ? TRUE : FALSE); |
| |
| /* Configure magic pattern wakeup event */ |
| wma_add_wow_wakeup_event(wma, WOW_MAGIC_PKT_RECVD_EVENT, |
| wma->wow.magic_ptrn_enable); |
| |
| /* Configure deauth based wakeup */ |
| wma_add_wow_wakeup_event(wma, WOW_DEAUTH_RECVD_EVENT, |
| wma->wow.deauth_enable); |
| |
| /* Configure disassoc based wakeup */ |
| wma_add_wow_wakeup_event(wma, WOW_DISASSOC_RECVD_EVENT, |
| wma->wow.disassoc_enable); |
| |
| /* Configure beacon miss based wakeup */ |
| wma_add_wow_wakeup_event(wma, WOW_BMISS_EVENT, |
| wma->wow.bmiss_enable); |
| |
| #ifdef WLAN_FEATURE_GTK_OFFLOAD |
| /* Configure GTK based wakeup. Passing vdev_id 0 because |
| wma_add_wow_wakeup_event always uses vdev 0 for wow wake event id*/ |
| wma_add_wow_wakeup_event(wma, WOW_GTK_ERR_EVENT, |
| wma->wow.gtk_pdev_enable); |
| #endif |
| /* Configure probe req based wakeup */ |
| if (ap_vdev_available) |
| wma_add_wow_wakeup_event(wma, WOW_PROBE_REQ_WPS_IE_EVENT, |
| wps_enable); |
| /* Configure auth req based wakeup */ |
| wma_add_wow_wakeup_event(wma, WOW_AUTH_REQ_EVENT, |
| ap_vdev_available); |
| |
| /* Configure assoc req based wakeup */ |
| wma_add_wow_wakeup_event(wma, WOW_ASSOC_REQ_EVENT, |
| ap_vdev_available); |
| |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| /* Configure pno based wakeup */ |
| wma_add_wow_wakeup_event(wma, WOW_NLO_DETECTED_EVENT, |
| pno_in_progress); |
| |
| /* Configure pno scan complete wakeup */ |
| wma_add_wow_wakeup_event(wma, |
| WOW_NLO_SCAN_COMPLETE_EVENT, pno_matched); |
| #endif |
| |
| /* Configure roaming scan better AP based wakeup */ |
| wma_add_wow_wakeup_event(wma, WOW_BETTER_AP_EVENT, |
| TRUE); |
| |
| /* Configure ADDBA/DELBA wakeup */ |
| wma_add_wow_wakeup_event(wma, WOW_HTT_EVENT, TRUE); |
| |
| #ifdef FEATURE_WLAN_RA_FILTERING |
| /* Configure RA filter wakeup */ |
| if (wma->IsRArateLimitEnabled) |
| wma_add_wow_wakeup_event(wma, WOW_RA_MATCH_EVENT, TRUE); |
| else |
| WMA_LOGD("gRAFilterEnable is not set, RA filterning is disabled"); |
| #endif |
| #ifdef FEATURE_WLAN_AUTO_SHUTDOWN |
| wma_add_wow_wakeup_event(wma, WOW_HOST_AUTO_SHUTDOWN_EVENT, TRUE); |
| #endif |
| |
| #ifdef QCA_IBSS_SUPPORT |
| /* Configure beacon based wakeup */ |
| wma_add_wow_wakeup_event(wma, WOW_BEACON_EVENT, ibss_vdev_available); |
| #endif |
| |
| #ifdef FEATURE_WLAN_EXTSCAN |
| wma_add_wow_wakeup_event(wma, WOW_EXTSCAN_EVENT, extscan_in_progress); |
| #endif |
| |
| wma_ndp_add_wow_wakeup_event(wma, true); |
| #ifdef FEATURE_WLAN_TDLS |
| /* configure TDLS based wakeup */ |
| wma_add_wow_wakeup_event(wma, WOW_TDLS_CONN_TRACKER_EVENT, TRUE); |
| #endif |
| |
| wma_add_wow_wakeup_event(wma, WOW_OEM_RESPONSE_EVENT, TRUE); |
| /* |
| * Configure WOW for WOW_CHIP_POWER_FAILURE_DETECT_EVENT |
| * We will only check vdev 0 to configure WOW wakeup. |
| */ |
| if (wma->interfaces[0].in_bmps == true || |
| wma->interfaces[0].in_imps == true) |
| wma_add_wow_wakeup_event(wma, |
| WOW_CHIP_POWER_FAILURE_DETECT_EVENT, |
| TRUE); |
| |
| /* Enable wow wakeup events in FW */ |
| ret = wma_send_wakeup_mask(wma, TRUE); |
| if (ret) { |
| WMA_LOGE("%s Failed to enable wow pattern mask\n", __func__); |
| goto end; |
| } |
| |
| /* Disable wow wakeup events in FW */ |
| ret = wma_send_wakeup_mask(wma, FALSE); |
| if (ret) { |
| WMA_LOGE("%s Failed to disable wow pattern mask\n", __func__); |
| goto end; |
| } |
| |
| /* WOW is enabled in pcie suspend callback */ |
| wma->wow.wow_enable = TRUE; |
| wma->wow.wow_enable_cmd_sent = FALSE; |
| |
| end: |
| return ret; |
| } |
| |
| /* Adds received wow patterns in local wow pattern cache. */ |
| static VOS_STATUS wma_wow_add_pattern(tp_wma_handle wma, |
| tpSirWowlAddBcastPtrn ptrn) |
| { |
| struct wma_wow_ptrn_cache *cache; |
| |
| WMA_LOGD("wow add pattern"); |
| |
| /* Free if there are any pattern cached already in the same slot. */ |
| if (wma->wow.cache[ptrn->ucPatternId]) |
| wma_free_wow_ptrn(wma, ptrn->ucPatternId); |
| |
| wma->wow.cache[ptrn->ucPatternId] = (struct wma_wow_ptrn_cache *) |
| vos_mem_malloc(sizeof(*cache)); |
| |
| cache = wma->wow.cache[ptrn->ucPatternId]; |
| if (!cache) { |
| WMA_LOGE("Unable to alloc memory for wow"); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cache->ptrn = (u_int8_t *) vos_mem_malloc(ptrn->ucPatternSize); |
| if (!cache->ptrn) { |
| WMA_LOGE("Unable to alloce memory to cache wow pattern"); |
| vos_mem_free(cache); |
| wma->wow.cache[ptrn->ucPatternId] = NULL; |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cache->mask = (u_int8_t *) vos_mem_malloc(ptrn->ucPatternMaskSize); |
| if (!cache->mask) { |
| WMA_LOGE("Unable to alloc memory to cache wow ptrn mask"); |
| vos_mem_free(cache->ptrn); |
| vos_mem_free(cache); |
| wma->wow.cache[ptrn->ucPatternId] = NULL; |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| /* Cache wow pattern info until platform goes to suspend. */ |
| |
| cache->vdev_id = ptrn->sessionId; |
| cache->ptrn_len = ptrn->ucPatternSize; |
| cache->ptrn_offset = ptrn->ucPatternByteOffset; |
| cache->mask_len = ptrn->ucPatternMaskSize; |
| |
| vos_mem_copy(cache->ptrn, ptrn->ucPattern, cache->ptrn_len); |
| vos_mem_copy(cache->mask, ptrn->ucPatternMask, cache->mask_len); |
| wma->wow.no_of_ptrn_cached++; |
| |
| WMA_LOGD("wow pattern stored in cache (slot_id: %d, vdev id: %d)", |
| ptrn->ucPatternId, cache->vdev_id); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* Deletes given pattern from local wow pattern cache. */ |
| static VOS_STATUS wma_wow_del_pattern(tp_wma_handle wma, |
| tpSirWowlDelBcastPtrn ptrn) |
| { |
| WMA_LOGD("wow delete pattern"); |
| |
| if (!wma->wow.cache[ptrn->ucPatternId]) { |
| WMA_LOGE("wow pattern not found (pattern id: %d) in cache", |
| ptrn->ucPatternId); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| wma_free_wow_ptrn(wma, ptrn->ucPatternId); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* |
| * Records pattern enable/disable status locally. This choice will |
| * take effect when the driver enter into suspend state. |
| */ |
| static VOS_STATUS wma_wow_enter(tp_wma_handle wma, |
| tpSirHalWowlEnterParams info) |
| { |
| struct wma_txrx_node *iface; |
| |
| WMA_LOGD("wow enable req received for vdev id: %d", info->sessionId); |
| |
| if (info->sessionId > wma->max_bssid) { |
| WMA_LOGE("Invalid vdev id (%d)", info->sessionId); |
| vos_mem_free(info); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| iface = &wma->interfaces[info->sessionId]; |
| iface->ptrn_match_enable = info->ucPatternFilteringEnable ? |
| TRUE : FALSE; |
| wma->wow.magic_ptrn_enable = info->ucMagicPktEnable ? TRUE : FALSE; |
| wma->wow.deauth_enable = info->ucWowDeauthRcv ? TRUE : FALSE; |
| wma->wow.disassoc_enable = info->ucWowDeauthRcv ? TRUE : FALSE; |
| wma->wow.bmiss_enable = info->ucWowMaxMissedBeacons ? TRUE : FALSE; |
| |
| vos_mem_free(info); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* Clears all wow states */ |
| static VOS_STATUS wma_wow_exit(tp_wma_handle wma, |
| tpSirHalWowlExitParams info) |
| { |
| struct wma_txrx_node *iface; |
| |
| WMA_LOGD("wow disable req received for vdev id: %d", info->sessionId); |
| |
| if (info->sessionId > wma->max_bssid) { |
| WMA_LOGE("Invalid vdev id (%d)", info->sessionId); |
| vos_mem_free(info); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| iface = &wma->interfaces[info->sessionId]; |
| iface->ptrn_match_enable = FALSE; |
| wma->wow.magic_ptrn_enable = FALSE; |
| vos_mem_free(info); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* Handles suspend indication request received from umac. */ |
| static VOS_STATUS wma_suspend_req(tp_wma_handle wma, tpSirWlanSuspendParam info) |
| { |
| v_BOOL_t pno_in_progress = FALSE; |
| VOS_STATUS ret; |
| u_int8_t i; |
| bool extscan_in_progress = false; |
| bool pno_matched = false; |
| struct wma_txrx_node *iface; |
| bool enable_wow = false; |
| |
| if (info == NULL) { |
| WMA_LOGD("runtime PM: Request to suspend all interfaces"); |
| wmi_set_runtime_pm_inprogress(wma->wmi_handle, TRUE); |
| goto suspend_all_iface; |
| } |
| |
| wma->no_of_suspend_ind++; |
| |
| if (info->sessionId > wma->max_bssid) { |
| WMA_LOGE("Invalid vdev id (%d)", info->sessionId); |
| vos_mem_free(info); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| iface = &wma->interfaces[info->sessionId]; |
| if (!iface) { |
| WMA_LOGD("vdev %d node is not found", info->sessionId); |
| vos_mem_free(info); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| if (!wma->wow.magic_ptrn_enable && !iface->ptrn_match_enable) { |
| vos_mem_free(info); |
| |
| if (wma->no_of_suspend_ind == wma_get_vdev_count(wma)) { |
| WMA_LOGD("Both magic and pattern byte match are disabled"); |
| wma->no_of_suspend_ind = 0; |
| goto send_ready_to_suspend; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| iface->conn_state = (info->connectedState) ? TRUE : FALSE; |
| |
| /* |
| * Once WOW is enabled in FW, host can't send anymore |
| * data to fw. umac sends suspend indication on each |
| * vdev during platform suspend. WMA has to wait until |
| * suspend indication received on last vdev before |
| * enabling wow in fw. |
| */ |
| /* |
| * While processing suspend indication, there is a possibility of |
| * vdev(SAP/P2P-GO) deletion due to stop_ap. This may lead, Host to |
| * send WoW indication twice to FW, as vdev is one but HDD sends |
| * suspend indication twice to WMA. To fix this race condition check |
| * for wow_enable along with vdev count. |
| */ |
| if (wma->no_of_suspend_ind < wma_get_vdev_count(wma) || |
| wma->wow.wow_enable) { |
| vos_mem_free(info); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| wma->no_of_suspend_ind = 0; |
| wma->wow.gtk_pdev_enable = 0; |
| |
| suspend_all_iface: |
| if (info == NULL) { |
| for (i = 0; i < wma->max_bssid; i++) { |
| wma->interfaces[i].conn_state = |
| !!(wma->interfaces[i].vdev_up && |
| !wma_is_vdev_in_ap_mode(wma, i)); |
| } |
| } |
| |
| /* |
| * Enable WOW if any one of the condition meets, |
| * 1) Is any one of vdev in beaconning mode (in AP mode) ? |
| * 2) Is any one of vdev in connected state (in STA mode) ? |
| * 3) Is PNO in progress in any one of vdev ? |
| * 4) Is Extscan in progress in any one of vdev ? |
| * 5) Is any vdev in NAN data mode? BSS is already started at the |
| * the time of device creation. It is ready to accept data |
| * requests. |
| */ |
| for (i = 0; i < wma->max_bssid; i++) { |
| if ((wma_is_vdev_in_ap_mode(wma, i) |
| #ifdef QCA_IBSS_SUPPORT |
| || wma_is_vdev_in_ibss_mode(wma, i) |
| #endif |
| ) && wma->interfaces[i].vdev_up && |
| WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_BEACON_OFFLOAD)) { |
| WMA_LOGD("vdev %d is in beaconning mode, enabling wow", |
| i); |
| enable_wow = true; |
| } |
| if (WMA_IS_VDEV_IN_NDI_MODE(wma->interfaces, i)) { |
| WMA_LOGD("vdev %d is in NAN data mode, enabling wow", |
| i); |
| enable_wow = true; |
| } |
| } |
| for (i = 0; i < wma->max_bssid; i++) { |
| if (wma->interfaces[i].conn_state) |
| enable_wow = true; |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| if (wma->interfaces[i].pno_in_progress) { |
| WMA_LOGD("PNO is in progress, enabling wow"); |
| pno_in_progress = TRUE; |
| if (wma->interfaces[i].nlo_match_evt_received) |
| pno_matched = true; |
| break; |
| } |
| #endif |
| } |
| |
| #ifdef FEATURE_WLAN_EXTSCAN |
| for (i = 0; i < wma->max_bssid; i++) { |
| if (wma->interfaces[i].extscan_in_progress) { |
| WMA_LOGD("Extscan is in progress, enabling wow"); |
| enable_wow = true; |
| extscan_in_progress = true; |
| break; |
| } |
| } |
| #endif |
| |
| for (i = 0; i < wma->max_bssid; i++) { |
| wma->wow.gtk_pdev_enable |= wma->wow.gtk_err_enable[i]; |
| WMA_LOGD("VDEV_ID:%d, gtk_err_enable[%d]:%d, gtk_pdev_enable:%d", |
| i, i, wma->wow.gtk_err_enable[i], |
| wma->wow.gtk_pdev_enable); |
| } |
| |
| if (!enable_wow && !pno_in_progress && !extscan_in_progress) { |
| WMA_LOGD("All vdev are in disconnected state and pno/extscan is not in progress, skipping wow"); |
| vos_mem_free(info); |
| goto send_ready_to_suspend; |
| } |
| |
| WMA_LOGD("%sWOW Suspend", info ? "" : "Runtime PM "); |
| |
| /* |
| * At this point, suspend indication is received on |
| * last vdev. It's the time to enable wow in fw. |
| */ |
| #ifdef FEATURE_WLAN_LPHB |
| /* LPHB cache, if any item was enabled, should be |
| * applied. |
| */ |
| WMA_LOGD("%s: checking LPHB cache", __func__); |
| for (i = 0; i < 2; i++) { |
| if (wma->wow.lphb_cache[i].params.lphbEnableReq.enable) { |
| WMA_LOGD("%s: LPHB cache for item %d is marked as enable", |
| __func__, i + 1); |
| wma_lphb_conf_hbenable( |
| wma, |
| &(wma->wow.lphb_cache[i]), |
| FALSE); |
| } |
| } |
| #endif |
| |
| wma_feed_allowed_action_frame_patterns(wma); |
| |
| ret = wma_feed_wow_config_to_fw(wma, pno_in_progress, |
| extscan_in_progress, pno_matched, |
| info == NULL); |
| if (ret != VOS_STATUS_SUCCESS) { |
| wma_send_status_to_suspend_ind(wma, FALSE, info == NULL); |
| vos_mem_free(info); |
| return ret; |
| } |
| vos_mem_free(info); |
| |
| send_ready_to_suspend: |
| /* Set the Suspend DTIM Parameters */ |
| wma_set_suspend_dtim(wma); |
| |
| /* to handle race between hif_pci_suspend and |
| * unpause/pause tx handler |
| */ |
| wma_set_wow_bus_suspend(wma, 1); |
| |
| wma_send_status_to_suspend_ind(wma, TRUE, info == NULL); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* |
| * Sends host wakeup indication to FW. On receiving this indication, |
| * FW will come out of WOW. |
| */ |
| static VOS_STATUS wma_send_host_wakeup_ind_to_fw(tp_wma_handle wma) |
| { |
| wmi_wow_hostwakeup_from_sleep_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| int32_t len; |
| int ret; |
| #ifdef CONFIG_CNSS |
| struct ol_softc *scn = |
| vos_get_context(VOS_MODULE_ID_HIF, wma->vos_context); |
| tpAniSirGlobal pMac = (tpAniSirGlobal)vos_get_context(VOS_MODULE_ID_PE, |
| wma->vos_context); |
| if (NULL == pMac) { |
| WMA_LOGE("%s: Unable to get PE context", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| #endif |
| |
| len = sizeof(wmi_wow_hostwakeup_from_sleep_cmd_fixed_param); |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (wmi_wow_hostwakeup_from_sleep_cmd_fixed_param *) |
| wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_wow_hostwakeup_from_sleep_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_wow_hostwakeup_from_sleep_cmd_fixed_param)); |
| |
| vos_event_reset(&wma->wma_resume_event); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID); |
| if (ret) { |
| WMA_LOGE("Failed to send host wakeup indication to fw"); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("Host wakeup indication sent to fw"); |
| vos_status = vos_wait_single_event(&(wma->wma_resume_event), |
| WMA_RESUME_TIMEOUT); |
| if (VOS_STATUS_SUCCESS != vos_status) { |
| WMA_LOGE("%s: Timeout waiting for resume event from FW", |
| __func__); |
| if (wma_did_ssr_happen(wma)) { |
| WMA_LOGE("%s: SSR happened while waiting for response", |
| __func__); |
| return VOS_STATUS_E_ALREADY; |
| } |
| WMA_LOGE("%s: Pending commands %d credits %d", __func__, |
| wmi_get_pending_cmds(wma->wmi_handle), |
| wmi_get_host_credits(wma->wmi_handle)); |
| if (!vos_is_logp_in_progress(VOS_MODULE_ID_WDA, NULL)) { |
| #ifdef CONFIG_CNSS |
| if (pMac->sme.enableSelfRecovery) { |
| wmi_tag_crash_inject(wma->wmi_handle, true); |
| vos_trigger_recovery(false); |
| } else { |
| if (scn && scn->adf_dev) |
| vos_device_crashed(scn->adf_dev->dev); |
| else |
| VOS_BUG(0); |
| } |
| #else |
| VOS_BUG(0); |
| #endif |
| } else { |
| WMA_LOGE("%s: SSR in progress, ignore resume timeout", __func__); |
| } |
| } else { |
| WMA_LOGD("Host wakeup received"); |
| } |
| |
| if (VOS_STATUS_SUCCESS == vos_status) |
| wmi_set_target_suspend(wma->wmi_handle, FALSE); |
| |
| return vos_status; |
| } |
| |
| #ifdef FEATURE_WLAN_D0WOW |
| /* Disable D0-WOW in firmware. */ |
| VOS_STATUS wma_disable_d0wow_in_fw(tp_wma_handle wma) |
| { |
| wmi_d0_wow_enable_disable_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len; |
| int host_credits; |
| int wmi_pending_cmds; |
| int ret = 0; |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| #ifdef CONFIG_CNSS |
| tpAniSirGlobal pmac; |
| |
| pmac = vos_get_context(VOS_MODULE_ID_PE, wma->vos_context); |
| if (!pmac) { |
| WMA_LOGE("%s: Unable to get PE context!", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| #endif |
| |
| len = sizeof(wmi_d0_wow_enable_disable_cmd_fixed_param); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed to allocate WMI buffer!", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (wmi_d0_wow_enable_disable_cmd_fixed_param *)wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_d0_wow_enable_disable_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_d0_wow_enable_disable_cmd_fixed_param)); |
| cmd->enable = 0; |
| |
| host_credits = wmi_get_host_credits(wma->wmi_handle); |
| wmi_pending_cmds = wmi_get_pending_cmds(wma->wmi_handle); |
| if (host_credits < WMI_WOW_REQUIRED_CREDITS) { |
| WMA_LOGE("%s: No Credits when resume: %d, pending_cmds: %d, " |
| "cannot resume back", __func__, host_credits, |
| wmi_pending_cmds); |
| HTC_dump_counter_info(wma->htc_handle); |
| if (vos_is_logp_in_progress(VOS_MODULE_ID_WDA, NULL)) { |
| VOS_ASSERT(0); |
| } else { |
| #ifdef CONFIG_CNSS |
| if (pmac->sme.enableSelfRecovery) { |
| vos_trigger_recovery(false); |
| } else { |
| VOS_BUG(0); |
| } |
| #endif |
| } |
| |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| vos_event_reset(&wma->wma_resume_event); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_D0_WOW_ENABLE_DISABLE_CMDID); |
| if (ret) { |
| WMA_LOGE("Failed to disable D0-WOW in FW!"); |
| goto error; |
| } |
| |
| vos_status = vos_wait_single_event(&(wma->wma_resume_event), |
| WMA_RESUME_TIMEOUT); |
| if (VOS_STATUS_SUCCESS != vos_status) { |
| WMA_LOGP("%s: Timeout waiting for resume event from FW!", |
| __func__); |
| WMA_LOGP("%s: Pending commands: %d credits: %d", __func__, |
| wmi_get_pending_cmds(wma->wmi_handle), |
| wmi_get_host_credits(wma->wmi_handle)); |
| if (vos_is_logp_in_progress(VOS_MODULE_ID_WDA, NULL)) { |
| VOS_ASSERT(0); |
| } else { |
| #ifdef CONFIG_CNSS |
| if (pmac->sme.enableSelfRecovery) { |
| vos_trigger_recovery(false); |
| } else { |
| VOS_BUG(0); |
| } |
| #endif |
| } |
| |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| wma->wow.wow_enable_cmd_sent = FALSE; |
| wmi_set_d0wow_flag(wma->wmi_handle, FALSE); |
| WMA_LOGD("D0-WOW is disabled successfully in FW."); |
| return vos_status; |
| |
| error: |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| #endif /* FEATURE_WLAN_D0WOW */ |
| |
| /* Disable wow in PCIe resume context. */ |
| int wma_disable_wow_in_fw(WMA_HANDLE handle, int runtime_pm) |
| { |
| tp_wma_handle wma = handle; |
| VOS_STATUS ret; |
| |
| if (!wma->wow.wow_enable_cmd_sent) { |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| WMA_LOGD("WoW Resume in PCIe Context\n"); |
| |
| #ifdef FEATURE_WLAN_D0WOW |
| if (wma->ap_client_cnt > 0) { |
| WMA_LOGD("Exiting D0-WOW since client count is %d.", |
| wma->ap_client_cnt); |
| return wma_disable_d0wow_in_fw(wma); |
| } |
| #endif |
| |
| ret = wma_send_host_wakeup_ind_to_fw(wma); |
| |
| if (ret != VOS_STATUS_SUCCESS) |
| return ret; |
| |
| wma->wow.wow_enable_cmd_sent = FALSE; |
| |
| /* To allow the tx pause/unpause events */ |
| wma_set_wow_bus_suspend(wma, 0); |
| /* Unpause the vdev as we are resuming */ |
| wma_unpause_vdev(wma); |
| |
| return ret; |
| } |
| |
| #ifdef WLAN_FEATURE_LPSS |
| /** |
| * wma_is_lpass_enabled() - check if lpass is enabled |
| * @handle: Pointer to wma handle |
| * |
| * WoW is needed if LPASS or NaN feature is enabled in INI because |
| * target can't wake up itself if its put in PDEV suspend when LPASS |
| * or NaN features are supported |
| * |
| * Return: true if lpass is enabled else false |
| */ |
| bool static wma_is_lpass_enabled(tp_wma_handle wma) |
| { |
| if (wma->is_lpass_enabled) |
| return true; |
| else |
| return false; |
| } |
| #else |
| bool static wma_is_lpass_enabled(tp_wma_handle wma) |
| { |
| return false; |
| } |
| #endif |
| |
| #ifdef WLAN_FEATURE_NAN |
| /** |
| * wma_is_nan_enabled() - check if NaN is enabled |
| * @handle: Pointer to wma handle |
| * |
| * WoW is needed if LPASS or NaN feature is enabled in INI because |
| * target can't wake up itself if its put in PDEV suspend when LPASS |
| * or NaN features are supported |
| * |
| * Return: true if NaN is enabled else false |
| */ |
| bool static wma_is_nan_enabled(tp_wma_handle wma) |
| { |
| if (wma->is_nan_enabled) |
| return true; |
| else |
| return false; |
| } |
| #else |
| bool static wma_is_nan_enabled(tp_wma_handle wma) |
| { |
| return false; |
| } |
| #endif |
| |
| /** |
| * wma_is_wow_mode_selected() - check if wow needs to be enabled in fw |
| * @handle: Pointer to wma handle |
| * |
| * If lpass is enabled then always do wow else check wow_enable config |
| * |
| * Return: true is wow mode is needed else false |
| */ |
| int wma_is_wow_mode_selected(WMA_HANDLE handle) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| |
| if (wma_is_lpass_enabled(wma)) { |
| WMA_LOGD("LPASS is enabled select WoW"); |
| return true; |
| } else if (wma_is_nan_enabled(wma)) { |
| WMA_LOGD("NAN is enabled select WoW"); |
| return true; |
| } else { |
| WMA_LOGD("WoW enable %d", wma->wow.wow_enable); |
| return wma->wow.wow_enable; |
| } |
| } |
| |
| #ifdef WLAN_FEATURE_APFIND |
| |
| /** |
| * wma_apfind_set_cmd() - set APFIND configuration to firmware |
| * @wda_handle: pointer to wma handle. |
| * @apfind_req: pointer to apfind configuration request. |
| * |
| * This is called to send APFIND configuations to firmware via WMI command. |
| * |
| * Return: VOS_STATUS. |
| */ |
| static VOS_STATUS wma_apfind_set_cmd(void *wda_handle, |
| struct hal_apfind_request *apfind_req) |
| { |
| int ret; |
| tp_wma_handle wma_handle = (tp_wma_handle)wda_handle; |
| wmi_apfind_cmd_param *cmd; |
| wmi_buf_t buf; |
| u_int16_t len = sizeof(*cmd); |
| u_int16_t apfind_data_len, apfind_data_len_aligned; |
| u_int8_t *buf_ptr; |
| |
| if (!apfind_req) { |
| WMA_LOGE("%s:apfind req is not valid", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| apfind_data_len = apfind_req->request_data_len; |
| apfind_data_len_aligned = roundup(apfind_req->request_data_len, |
| sizeof(u_int32_t)); |
| len += WMI_TLV_HDR_SIZE + apfind_data_len_aligned; |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_apfind_cmd_param *) buf_ptr; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_apfind_cmd_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_apfind_cmd_param)); |
| cmd->data_len = apfind_req->request_data_len; |
| WMA_LOGD("%s: The data len value is %u", |
| __func__, apfind_req->request_data_len); |
| buf_ptr += sizeof(wmi_apfind_cmd_param); |
| |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, apfind_data_len_aligned); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| vos_mem_copy(buf_ptr, apfind_req->request_data, |
| cmd->data_len); |
| |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_APFIND_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE("%s Failed to send set param command ret = %d", __func__, ret); |
| wmi_buf_free(buf); |
| } |
| return ret; |
| } |
| #endif /* WLAN_FEATURE_APFIND */ |
| |
| tAniGetPEStatsRsp * wma_get_stats_rsp_buf(tAniGetPEStatsReq *get_stats_param) |
| { |
| tAniGetPEStatsRsp *stats_rsp_params; |
| tANI_U32 len, temp_mask, counter = 0; |
| |
| len= sizeof(tAniGetPEStatsRsp); |
| temp_mask = get_stats_param->statsMask; |
| |
| while (temp_mask) { |
| if (temp_mask & 1) { |
| switch (counter) { |
| case eCsrSummaryStats: |
| len += sizeof(tCsrSummaryStatsInfo); |
| break; |
| case eCsrGlobalClassAStats: |
| len += sizeof(tCsrGlobalClassAStatsInfo); |
| break; |
| case eCsrGlobalClassBStats: |
| len += sizeof(tCsrGlobalClassBStatsInfo); |
| break; |
| case eCsrGlobalClassCStats: |
| len += sizeof(tCsrGlobalClassCStatsInfo); |
| break; |
| case eCsrGlobalClassDStats: |
| len += sizeof(tCsrGlobalClassDStatsInfo); |
| break; |
| case eCsrPerStaStats: |
| len += sizeof(tCsrPerStaStatsInfo); |
| break; |
| case csr_per_chain_rssi_stats: |
| len += |
| sizeof(struct csr_per_chain_rssi_stats_info); |
| break; |
| } |
| } |
| |
| counter++; |
| temp_mask >>= 1; |
| } |
| |
| stats_rsp_params = (tAniGetPEStatsRsp *)vos_mem_malloc(len); |
| if (!stats_rsp_params) { |
| WMA_LOGE("memory allocation failed for tAniGetPEStatsRsp"); |
| VOS_ASSERT(0); |
| return NULL; |
| } |
| |
| vos_mem_zero(stats_rsp_params, len); |
| stats_rsp_params->staId = get_stats_param->staId; |
| stats_rsp_params->statsMask = get_stats_param->statsMask; |
| stats_rsp_params->msgType = WDA_GET_STATISTICS_RSP; |
| stats_rsp_params->msgLen = len - sizeof(tAniGetPEStatsRsp); |
| stats_rsp_params->rc = eHAL_STATUS_SUCCESS; |
| return stats_rsp_params; |
| } |
| |
| /* function : wma_get_stats_req |
| * Description : return the statistics |
| * Args : wma handle, pointer to tAniGetPEStatsReq |
| * Returns : nothing |
| */ |
| static void wma_get_stats_req(WMA_HANDLE handle, |
| tAniGetPEStatsReq *get_stats_param) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| struct wma_txrx_node *node; |
| wmi_buf_t buf; |
| wmi_request_stats_cmd_fixed_param *cmd; |
| tAniGetPEStatsRsp *pGetPEStatsRspParams; |
| u_int8_t len = sizeof(wmi_request_stats_cmd_fixed_param); |
| |
| WMA_LOGD("%s: Enter", __func__); |
| node = &wma_handle->interfaces[get_stats_param->sessionId]; |
| if (node->stats_rsp) { |
| pGetPEStatsRspParams = node->stats_rsp; |
| if (pGetPEStatsRspParams->staId == get_stats_param->staId && |
| pGetPEStatsRspParams->statsMask == |
| get_stats_param->statsMask) { |
| WMA_LOGI("Stats for staId %d with stats mask %d " |
| "is pending.... ignore new request", |
| get_stats_param->staId, |
| get_stats_param->statsMask); |
| goto end; |
| } else { |
| vos_mem_free(node->stats_rsp); |
| node->stats_rsp = NULL; |
| node->fw_stats_set = 0; |
| } |
| } |
| |
| pGetPEStatsRspParams = wma_get_stats_rsp_buf(get_stats_param); |
| if (!pGetPEStatsRspParams) |
| goto end; |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed to allocate wmi buffer", __func__); |
| goto failed; |
| } |
| |
| node->fw_stats_set = 0; |
| node->stats_rsp = pGetPEStatsRspParams; |
| wma_handle->get_sta_peer_info = FALSE; |
| cmd = (wmi_request_stats_cmd_fixed_param *)wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_request_stats_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_request_stats_cmd_fixed_param)); |
| cmd->stats_id = WMI_REQUEST_PEER_STAT|WMI_REQUEST_PDEV_STAT| |
| WMI_REQUEST_VDEV_STAT|WMI_REQUEST_RSSI_PER_CHAIN_STAT; |
| cmd->vdev_id = get_stats_param->sessionId; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(node->bssid, &cmd->peer_macaddr); |
| WMA_LOGD("STATS REQ VDEV_ID:%d-->", cmd->vdev_id); |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_REQUEST_STATS_CMDID)) { |
| |
| WMA_LOGE("%s: Failed to send WMI_REQUEST_STATS_CMDID", |
| __func__); |
| wmi_buf_free(buf); |
| goto failed; |
| } |
| |
| goto end; |
| failed: |
| |
| pGetPEStatsRspParams->rc = eHAL_STATUS_FAILURE; |
| node->stats_rsp = NULL; |
| /* send response to UMAC*/ |
| wma_send_msg(wma_handle, WDA_GET_STATISTICS_RSP, pGetPEStatsRspParams, |
| 0) ; |
| end: |
| vos_mem_free(get_stats_param); |
| WMA_LOGD("%s: Exit", __func__); |
| return; |
| } |
| |
| /** |
| * wma_process_mib_stats_req() - Mib stats request |
| * @wda_handle: pointer to wma handle. |
| * @get_mib_stats_param: mib stats request parameters |
| * |
| * This API calls the FW to get the latest Mib stats. |
| * |
| * Return: |
| */ |
| static void wma_process_mib_stats_req(WMA_HANDLE handle, |
| struct get_mib_stats_req *get_mib_stats_param) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| wmi_buf_t buf; |
| wmi_request_stats_cmd_fixed_param *cmd; |
| u_int8_t len = sizeof(wmi_request_stats_cmd_fixed_param); |
| |
| WMA_LOGD("%s: Enter", __func__); |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed to allocate wmi buffer", __func__); |
| return; |
| } |
| cmd = (wmi_request_stats_cmd_fixed_param *)wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_request_stats_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_request_stats_cmd_fixed_param)); |
| cmd->stats_id = WMI_REQUEST_MIB_STAT; |
| cmd->vdev_id = get_mib_stats_param->session_id; |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_REQUEST_STATS_CMDID)) { |
| |
| WMA_LOGE("Failed to send WMI Mib Stats request to fw"); |
| wmi_buf_free(buf); |
| return; |
| } |
| |
| return; |
| } |
| |
| static void wma_init_scan_req(tp_wma_handle wma_handle, |
| tInitScanParams *init_scan_param) |
| { |
| WMA_LOGD("%s: Send dummy init scan response for legacy scan request", |
| __func__); |
| init_scan_param->status = eHAL_STATUS_SUCCESS; |
| /* send ini scan response message back to PE */ |
| wma_send_msg(wma_handle, WDA_INIT_SCAN_RSP, (void *)init_scan_param, |
| 0); |
| } |
| |
| static void wma_finish_scan_req(tp_wma_handle wma_handle, |
| tFinishScanParams *finish_scan_param) |
| { |
| WMA_LOGD("%s: Send dummy finish scan response for legacy scan request", |
| __func__); |
| finish_scan_param->status = eHAL_STATUS_SUCCESS; |
| /* send finish scan response message back to PE */ |
| wma_send_msg(wma_handle, WDA_FINISH_SCAN_RSP, (void *)finish_scan_param, |
| 0); |
| } |
| |
| static void wma_process_update_opmode(tp_wma_handle wma_handle, |
| tUpdateVHTOpMode *update_vht_opmode) |
| { |
| struct wma_txrx_node *iface; |
| WLAN_PHY_MODE chanMode; |
| wmi_channel_width chanwidth; |
| |
| iface = &wma_handle->interfaces[update_vht_opmode->smesessionId]; |
| if (update_vht_opmode->chanMode == MODE_MAX) |
| chanMode = iface->chanmode; |
| else |
| chanMode = update_vht_opmode->chanMode; |
| |
| WMA_LOGD("%s: opMode = %d, chanMode = %d", |
| __func__, update_vht_opmode->opMode, chanMode); |
| |
| chanwidth = chanmode_to_chanwidth(chanMode); |
| if (chanwidth < update_vht_opmode->opMode) { |
| WMA_LOGE("%s: stop changing chanwidth from %d to %d,", |
| __func__, |
| chanwidth, update_vht_opmode->opMode); |
| } else { |
| iface->chanmode = chanMode; |
| wma_set_peer_param(wma_handle, update_vht_opmode->peer_mac, |
| WMI_PEER_PHYMODE, chanMode, |
| update_vht_opmode->smesessionId); |
| |
| wma_set_peer_param(wma_handle, update_vht_opmode->peer_mac, |
| WMI_PEER_CHWIDTH, update_vht_opmode->opMode, |
| update_vht_opmode->smesessionId); |
| } |
| } |
| |
| static void wma_process_update_rx_nss(tp_wma_handle wma_handle, |
| tUpdateRxNss *update_rx_nss) |
| { |
| struct wma_txrx_node *intr = |
| &wma_handle->interfaces[update_rx_nss->smesessionId]; |
| int rxNss = update_rx_nss->rxNss; |
| |
| if (wma_handle->per_band_chainmask_supp) { |
| if (intr->mhz < WMA_2_4_GHZ_MAX_FREQ) |
| wma_update_txrx_chainmask(intr->nss_2g, &rxNss); |
| else |
| wma_update_txrx_chainmask(intr->nss_5g, &rxNss); |
| } |
| else |
| wma_update_txrx_chainmask(wma_handle->num_rf_chains, &rxNss); |
| intr->nss = (tANI_U8) rxNss; |
| update_rx_nss->rxNss = (tANI_U32) rxNss; |
| |
| WMA_LOGD("%s: Rx Nss = %d", __func__, update_rx_nss->rxNss); |
| |
| wma_set_peer_param(wma_handle, update_rx_nss->peer_mac, |
| WMI_PEER_NSS, update_rx_nss->rxNss, |
| update_rx_nss->smesessionId); |
| } |
| |
| #ifdef FEATURE_OEM_DATA_SUPPORT |
| static void wma_start_oem_data_req(tp_wma_handle wma_handle, |
| tStartOemDataReq *startOemDataReq) |
| { |
| wmi_buf_t buf; |
| u_int8_t *cmd; |
| int ret = 0; |
| tStartOemDataRsp *pStartOemDataRsp; |
| |
| WMA_LOGD("%s: Send OEM Data Request to target", __func__); |
| |
| if (!startOemDataReq || !startOemDataReq->data) { |
| WMA_LOGE("%s: startOemDataReq is null", __func__); |
| goto out; |
| } |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not send Oem data request cmd", __func__); |
| return; |
| } |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, |
| (startOemDataReq->data_len + WMI_TLV_HDR_SIZE)); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| goto out; |
| } |
| |
| cmd = (u_int8_t *)wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(cmd, WMITLV_TAG_ARRAY_BYTE, |
| startOemDataReq->data_len); |
| cmd += WMI_TLV_HDR_SIZE; |
| vos_mem_copy(cmd, &startOemDataReq->data[0], |
| startOemDataReq->data_len); |
| |
| WMA_LOGI("%s: Sending OEM Data Request to target, data len (%d)", |
| __func__, startOemDataReq->data_len); |
| |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| (startOemDataReq->data_len + |
| WMI_TLV_HDR_SIZE), |
| WMI_OEM_REQ_CMDID); |
| |
| if (ret != EOK) { |
| WMA_LOGE("%s:wmi cmd send failed", __func__); |
| wmi_buf_free(buf); |
| } |
| |
| out: |
| /* free oem data req buffer received from UMAC */ |
| if (startOemDataReq) { |
| if (startOemDataReq->data) |
| vos_mem_free(startOemDataReq->data); |
| vos_mem_free(startOemDataReq); |
| } |
| |
| /* Now send data resp back to PE/SME with message sub-type of |
| * WMI_OEM_INTERNAL_RSP. This is required so that PE/SME clears |
| * up pending active command. Later when desired oem response(s) |
| * comes as wmi event from target then those shall be passed |
| * to oem application |
| */ |
| pStartOemDataRsp = vos_mem_malloc(sizeof(*pStartOemDataRsp)); |
| if (!pStartOemDataRsp) |
| { |
| WMA_LOGE("%s:failed to allocate memory for OEM Data Resp to PE", |
| __func__); |
| return; |
| } |
| vos_mem_zero(pStartOemDataRsp, sizeof(tStartOemDataRsp)); |
| pStartOemDataRsp->target_rsp = false; |
| pStartOemDataRsp->oem_data_rsp = NULL; |
| |
| WMA_LOGI("%s: Sending WDA_START_OEM_DATA_RSP to clear up PE/SME pending cmd", |
| __func__); |
| |
| wma_send_msg(wma_handle, WDA_START_OEM_DATA_RSP, (void *)pStartOemDataRsp, 0); |
| |
| return; |
| } |
| #endif /* FEATURE_OEM_DATA_SUPPORT */ |
| |
| #ifdef FEATURE_WLAN_ESE |
| |
| #define TSM_DELAY_HISTROGRAM_BINS 4 |
| /* |
| * @brief: A parallel function to WDA_ProcessTsmStatsReq for pronto. This |
| * function fetches stats from data path APIs and post |
| * WDA_TSM_STATS_RSP msg back to LIM. |
| * @param: wma_handler - handle to wma |
| * @param: pTsmStatsMsg - TSM stats struct that needs to be populated and |
| * passed in message. |
| */ |
| VOS_STATUS wma_process_tsm_stats_req(tp_wma_handle wma_handler, |
| void *pTsmStatsMsg) |
| { |
| u_int8_t counter; |
| u_int32_t queue_delay_microsec = 0; |
| u_int32_t tx_delay_microsec = 0; |
| u_int16_t packet_count = 0; |
| u_int16_t packet_loss_count = 0; |
| tpAniTrafStrmMetrics pTsmMetric = NULL; |
| #ifdef FEATURE_WLAN_ESE_UPLOAD |
| tpAniGetTsmStatsReq pStats = (tpAniGetTsmStatsReq)pTsmStatsMsg; |
| tpAniGetTsmStatsRsp pTsmRspParams = NULL; |
| #else |
| tpTSMStats pStats = (tpTSMStats)pTsmStatsMsg; |
| #endif |
| int tid = pStats->tid; |
| /* |
| * The number of histrogram bin report by data path api are different |
| * than required by TSM, hence different (6) size array used |
| */ |
| u_int16_t bin_values[QCA_TX_DELAY_HIST_REPORT_BINS] = {0,}; |
| |
| ol_txrx_pdev_handle pdev = vos_get_context(VOS_MODULE_ID_TXRX, |
| wma_handler->vos_context); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to get pdev", __func__); |
| vos_mem_free(pTsmStatsMsg); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| /* get required values from data path APIs */ |
| ol_tx_delay(pdev, &queue_delay_microsec, &tx_delay_microsec, tid); |
| ol_tx_delay_hist(pdev, bin_values, tid); |
| ol_tx_packet_count(pdev, &packet_count, &packet_loss_count, tid ); |
| |
| #ifdef FEATURE_WLAN_ESE_UPLOAD |
| pTsmRspParams = |
| (tpAniGetTsmStatsRsp)vos_mem_malloc(sizeof(tAniGetTsmStatsRsp)); |
| if(NULL == pTsmRspParams) |
| { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "%s: VOS MEM Alloc Failure", __func__); |
| VOS_ASSERT(0); |
| vos_mem_free(pTsmStatsMsg); |
| return VOS_STATUS_E_NOMEM; |
| } |
| pTsmRspParams->staId = pStats->staId; |
| pTsmRspParams->rc = eSIR_FAILURE; |
| pTsmRspParams->tsmStatsReq = pStats; |
| pTsmMetric = &pTsmRspParams->tsmMetrics; |
| #else |
| pTsmMetric = (tpAniTrafStrmMetrics)&pStats->tsmMetrics; |
| #endif |
| /* populate pTsmMetric */ |
| pTsmMetric->UplinkPktQueueDly = queue_delay_microsec; |
| /* store only required number of bin values */ |
| for ( counter = 0; counter < TSM_DELAY_HISTROGRAM_BINS; counter++) |
| { |
| pTsmMetric->UplinkPktQueueDlyHist[counter] = bin_values[counter]; |
| } |
| pTsmMetric->UplinkPktTxDly = tx_delay_microsec; |
| pTsmMetric->UplinkPktLoss = packet_loss_count; |
| pTsmMetric->UplinkPktCount = packet_count; |
| |
| /* |
| * No need to populate roaming delay and roaming count as they are |
| * being populated just before sending IAPP frame out |
| */ |
| /* post this message to LIM/PE */ |
| #ifdef FEATURE_WLAN_ESE_UPLOAD |
| wma_send_msg(wma_handler, WDA_TSM_STATS_RSP, (void *)pTsmRspParams , 0) ; |
| #else |
| wma_send_msg(wma_handler, WDA_TSM_STATS_RSP, (void *)pTsmStatsMsg , 0) ; |
| #endif |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| #endif /* FEATURE_WLAN_ESE */ |
| |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| static void wma_set_ric_req(tp_wma_handle wma, void *msg, tANI_U8 is_add_ts) |
| { |
| wmi_ric_request_fixed_param *cmd; |
| wmi_ric_tspec *tspec_param; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| tSirMacTspecIE *ptspecIE; |
| int32_t len = sizeof(wmi_ric_request_fixed_param)+ |
| WMI_TLV_HDR_SIZE + |
| sizeof(wmi_ric_tspec); |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: wmi_buf_alloc failed", __func__); |
| return; |
| } |
| |
| buf_ptr = (u_int8_t *)wmi_buf_data(buf); |
| |
| cmd = (wmi_ric_request_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_ric_request_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_ric_request_fixed_param)); |
| if (is_add_ts) |
| cmd->vdev_id = ((tAddTsParams *)msg)->sessionId; |
| else |
| cmd->vdev_id = ((tDelTsParams *)msg)->sessionId; |
| cmd->num_ric_request = 1; /* Today we are sending only 1 ric at once */ |
| cmd->is_add_ric = is_add_ts; |
| |
| buf_ptr += sizeof(wmi_ric_request_fixed_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| sizeof(wmi_ric_tspec)); |
| |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| tspec_param = (wmi_ric_tspec *)buf_ptr; |
| WMITLV_SET_HDR(&tspec_param->tlv_header, |
| WMITLV_TAG_STRUC_wmi_ric_tspec, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_ric_tspec)); |
| |
| if(is_add_ts) |
| ptspecIE = &(((tAddTsParams *)msg)->tspec); |
| else |
| ptspecIE = &(((tDelTsParams *)msg)->delTsInfo.tspec); |
| |
| /* Fill the tsinfo in the format expected by firmware */ |
| #ifndef ANI_LITTLE_BIT_ENDIAN |
| vos_mem_copy(((tANI_U8 *)&tspec_param->ts_info)+1, |
| ((tANI_U8 *)&ptspecIE->tsinfo)+1, 2); |
| #else |
| vos_mem_copy(((tANI_U8 *)&tspec_param->ts_info), |
| ((tANI_U8 *)&ptspecIE->tsinfo)+1, 2); |
| #endif |
| |
| tspec_param->nominal_msdu_size = ptspecIE->nomMsduSz; |
| tspec_param->maximum_msdu_size = ptspecIE->maxMsduSz; |
| tspec_param->min_service_interval = ptspecIE->minSvcInterval; |
| tspec_param->max_service_interval = ptspecIE->maxSvcInterval; |
| tspec_param->inactivity_interval = ptspecIE->inactInterval; |
| tspec_param->suspension_interval = ptspecIE->suspendInterval; |
| tspec_param->svc_start_time = ptspecIE->svcStartTime; |
| tspec_param->min_data_rate = ptspecIE->minDataRate; |
| tspec_param->mean_data_rate = ptspecIE->meanDataRate; |
| tspec_param->peak_data_rate = ptspecIE->peakDataRate; |
| tspec_param->max_burst_size = ptspecIE->maxBurstSz; |
| tspec_param->delay_bound = ptspecIE->delayBound; |
| tspec_param->min_phy_rate = ptspecIE->minPhyRate; |
| tspec_param->surplus_bw_allowance = ptspecIE->surplusBw; |
| tspec_param->medium_time = 0; |
| |
| WMA_LOGI("%s: Set RIC Req is_add_ts:%d", __func__, is_add_ts); |
| |
| if (wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_ROAM_SET_RIC_REQUEST_CMDID)) { |
| WMA_LOGP("%s: Failed to send vdev Set RIC Req command", __func__); |
| if(is_add_ts) |
| ((tAddTsParams *)msg)->status = eHAL_STATUS_FAILURE; |
| wmi_buf_free(buf); |
| } |
| } |
| #endif |
| |
| static void wma_del_ts_req(tp_wma_handle wma, tDelTsParams *msg) |
| { |
| wmi_vdev_wmm_delts_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: wmi_buf_alloc failed", __func__); |
| goto err; |
| } |
| cmd = (wmi_vdev_wmm_delts_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_wmm_delts_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_vdev_wmm_delts_cmd_fixed_param)); |
| cmd->vdev_id = msg->sessionId; |
| cmd->ac = TID_TO_WME_AC(msg->userPrio); |
| |
| WMA_LOGD("Delts vdev:%d, ac:%d, %s:%d", |
| cmd->vdev_id, cmd->ac, __FUNCTION__, __LINE__); |
| if (wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_VDEV_WMM_DELTS_CMDID)) { |
| WMA_LOGP("%s: Failed to send vdev DELTS command", __func__); |
| wmi_buf_free(buf); |
| } |
| |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| if(msg->setRICparams == true) |
| wma_set_ric_req(wma, msg, false); |
| #endif |
| |
| err: |
| vos_mem_free(msg); |
| } |
| |
| /* |
| * @brief: A function to handle WDA_AGGR_QOS_REQ. This will send out |
| * ADD_TS requestes to firmware in loop for all the ACs with |
| * active flow. |
| * @param: wma_handler - handle to wma |
| * @param: pAggrQosRspMsg - combined struct for all ADD_TS requests. |
| */ |
| static void wma_aggr_qos_req(tp_wma_handle wma, tAggrAddTsParams *pAggrQosRspMsg) |
| { |
| int i = 0; |
| wmi_vdev_wmm_addts_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len = sizeof(*cmd); |
| |
| for( i = 0; i < HAL_QOS_NUM_AC_MAX; i++ ) |
| { |
| // if flow in this AC is active |
| if ( ((1 << i) & pAggrQosRspMsg->tspecIdx) ) |
| { |
| /* |
| * as per implementation of wma_add_ts_req() we |
| * are not waiting any response from firmware so |
| * apart from sending ADDTS to firmware just send |
| * success to upper layers |
| */ |
| pAggrQosRspMsg->status[i] = eHAL_STATUS_SUCCESS; |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: wmi_buf_alloc failed", __func__); |
| goto aggr_qos_exit; |
| } |
| cmd = (wmi_vdev_wmm_addts_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_wmm_addts_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_vdev_wmm_addts_cmd_fixed_param)); |
| cmd->vdev_id = pAggrQosRspMsg->sessionId; |
| cmd->ac = TID_TO_WME_AC(pAggrQosRspMsg->tspec[i].tsinfo.traffic.userPrio); |
| cmd->medium_time_us = pAggrQosRspMsg->tspec[i].mediumTime * 32; |
| cmd->downgrade_type = WMM_AC_DOWNGRADE_DEPRIO; |
| WMA_LOGD("%s:%d: Addts vdev:%d, ac:%d, mediumTime:%d downgrade_type:%d", |
| __func__, __LINE__, cmd->vdev_id, cmd->ac, |
| cmd->medium_time_us, cmd->downgrade_type); |
| if (wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_VDEV_WMM_ADDTS_CMDID)) { |
| WMA_LOGP("%s: Failed to send vdev ADDTS command", __func__); |
| pAggrQosRspMsg->status[i] = eHAL_STATUS_FAILURE; |
| wmi_buf_free(buf); |
| } |
| } |
| } |
| |
| aggr_qos_exit: |
| // send reponse to upper layers from here only. |
| wma_send_msg(wma, WDA_AGGR_QOS_RSP, pAggrQosRspMsg, 0); |
| } |
| |
| static void wma_add_ts_req(tp_wma_handle wma, tAddTsParams *msg) |
| { |
| wmi_vdev_wmm_addts_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t len = sizeof(*cmd); |
| |
| #ifdef FEATURE_WLAN_ESE |
| /* |
| * msmt_interval is in unit called TU (1 TU = 1024 us) |
| * max value of msmt_interval cannot make resulting |
| * interval_miliseconds overflow 32 bit |
| */ |
| tANI_U32 intervalMiliseconds; |
| ol_txrx_pdev_handle pdev = |
| vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to get pdev", __func__); |
| goto err; |
| } |
| |
| intervalMiliseconds = (msg->tsm_interval*1024)/1000; |
| |
| ol_tx_set_compute_interval(pdev, intervalMiliseconds); |
| #endif |
| msg->status = eHAL_STATUS_SUCCESS; |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: wmi_buf_alloc failed", __func__); |
| goto err; |
| } |
| cmd = (wmi_vdev_wmm_addts_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_wmm_addts_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_vdev_wmm_addts_cmd_fixed_param)); |
| cmd->vdev_id = msg->sme_session_id; |
| cmd->ac = TID_TO_WME_AC(msg->tspec.tsinfo.traffic.userPrio); |
| cmd->medium_time_us = msg->tspec.mediumTime * 32; |
| cmd->downgrade_type = WMM_AC_DOWNGRADE_DROP; |
| WMA_LOGD("Addts vdev:%d, ac:%d, mediumTime:%d, downgrade_type:%d %s:%d", |
| cmd->vdev_id, cmd->ac, cmd->medium_time_us, |
| cmd->downgrade_type, __func__, __LINE__); |
| if (wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_VDEV_WMM_ADDTS_CMDID)) { |
| WMA_LOGP("%s: Failed to send vdev ADDTS command", __func__); |
| msg->status = eHAL_STATUS_FAILURE; |
| wmi_buf_free(buf); |
| } |
| |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| if(msg->setRICparams == true) |
| wma_set_ric_req(wma, msg, true); |
| #endif |
| |
| err: |
| wma_send_msg(wma, WDA_ADD_TS_RSP, msg, 0); |
| } |
| |
| static int wma_process_receive_filter_set_filter_req(tp_wma_handle wma_handle, |
| tSirRcvPktFilterCfgType *rcv_filter_param) |
| { |
| wmi_chatter_coalescing_add_filter_cmd_fixed_param *cmd; |
| chatter_pkt_coalescing_filter *cmd_filter; |
| u_int8_t *buf_ptr; |
| wmi_buf_t buf; |
| int num_rules = 1; /* Only one rule at a time */ |
| int len; |
| int err; |
| int i; |
| |
| /* allocate the memory */ |
| len = sizeof(*cmd) + WMI_TLV_HDR_SIZE + sizeof(*cmd_filter) * num_rules; |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate buffer to send set_param cmd"); |
| vos_mem_free(rcv_filter_param); |
| return -ENOMEM; |
| } |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| |
| /* fill the fixed part */ |
| cmd = (wmi_chatter_coalescing_add_filter_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_chatter_coalescing_add_filter_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_chatter_coalescing_add_filter_cmd_fixed_param)); |
| cmd->num_of_filters = num_rules; |
| |
| /* specify the type of data in the subsequent buffer */ |
| buf_ptr += sizeof(*cmd); |
| cmd_filter = (chatter_pkt_coalescing_filter *) buf_ptr; |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| num_rules * sizeof(chatter_pkt_coalescing_filter)); |
| |
| /* fill the actual filter data */ |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| cmd_filter = (chatter_pkt_coalescing_filter *) buf_ptr; |
| |
| WMITLV_SET_HDR(&cmd_filter->tlv_header, |
| WMITLV_TAG_STRUC_wmi_chatter_pkt_coalescing_filter, |
| WMITLV_GET_STRUCT_TLVLEN(chatter_pkt_coalescing_filter)); |
| |
| cmd_filter->filter_id = rcv_filter_param->filterId; |
| cmd_filter->max_coalescing_delay = rcv_filter_param->coalesceTime; |
| cmd_filter->pkt_type = CHATTER_COALESCING_PKT_TYPE_UNICAST | |
| CHATTER_COALESCING_PKT_TYPE_MULTICAST | |
| CHATTER_COALESCING_PKT_TYPE_BROADCAST; |
| cmd_filter->num_of_test_field = MIN(rcv_filter_param->numFieldParams, |
| CHATTER_MAX_FIELD_TEST); |
| |
| for (i = 0; i < cmd_filter->num_of_test_field; i++) { |
| cmd_filter->test_fields[i].offset = rcv_filter_param->paramsData[i].dataOffset; |
| cmd_filter->test_fields[i].length = MIN(rcv_filter_param->paramsData[i].dataLength, |
| CHATTER_MAX_TEST_FIELD_LEN32); |
| cmd_filter->test_fields[i].test = rcv_filter_param->paramsData[i].cmpFlag; |
| memcpy(&cmd_filter->test_fields[i].value, rcv_filter_param->paramsData[i].compareData, |
| cmd_filter->test_fields[i].length); |
| memcpy(&cmd_filter->test_fields[i].mask, rcv_filter_param->paramsData[i].dataMask, |
| cmd_filter->test_fields[i].length); |
| } |
| WMA_LOGD("Chatter packets, adding filter with id: %d, num_test_fields=%d",cmd_filter->filter_id, |
| cmd_filter->num_of_test_field); |
| /* send the command along with data */ |
| err = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_CHATTER_ADD_COALESCING_FILTER_CMDID); |
| if (err) { |
| WMA_LOGE("Failed to send set_param cmd"); |
| wmi_buf_free(buf); |
| vos_mem_free(rcv_filter_param); |
| return -EIO; |
| } |
| vos_mem_free(rcv_filter_param); |
| return 0; /* SUCCESS */ |
| } |
| |
| static int wma_process_receive_filter_clear_filter_req(tp_wma_handle wma_handle, |
| tSirRcvFltPktClearParam *rcv_clear_param) |
| { |
| wmi_chatter_coalescing_delete_filter_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int err; |
| |
| /* allocate the memory */ |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, sizeof(*cmd)); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate buffer to send set_param cmd"); |
| vos_mem_free(rcv_clear_param); |
| return -ENOMEM; |
| } |
| |
| /* fill the fixed part */ |
| cmd = (wmi_chatter_coalescing_delete_filter_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_chatter_coalescing_delete_filter_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_chatter_coalescing_delete_filter_cmd_fixed_param)); |
| cmd->filter_id = rcv_clear_param->filterId; |
| WMA_LOGD("Chatter packets, clearing filter with id: %d",cmd->filter_id); |
| |
| /* send the command along with data */ |
| err = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| sizeof(*cmd), WMI_CHATTER_DELETE_COALESCING_FILTER_CMDID); |
| if (err) { |
| WMA_LOGE("Failed to send set_param cmd"); |
| wmi_buf_free(buf); |
| vos_mem_free(rcv_clear_param); |
| return -EIO; |
| } |
| vos_mem_free(rcv_clear_param); |
| return 0; /* SUCCESS */ |
| } |
| |
| static int wma_set_base_macaddr_indicate(tp_wma_handle wma_handle, |
| tSirMacAddr *customAddr) |
| { |
| wmi_pdev_set_base_macaddr_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int err; |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, sizeof(*cmd)); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate buffer to send set_base_macaddr cmd"); |
| return -ENOMEM; |
| } |
| |
| cmd = (wmi_pdev_set_base_macaddr_cmd_fixed_param *) wmi_buf_data(buf); |
| vos_mem_zero(cmd, sizeof(*cmd)); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_pdev_set_base_macaddr_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_pdev_set_base_macaddr_cmd_fixed_param)); |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(*customAddr, &cmd->base_macaddr); |
| err = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| sizeof(*cmd), WMI_PDEV_SET_BASE_MACADDR_CMDID); |
| if (err) { |
| WMA_LOGE("Failed to send set_base_macaddr cmd"); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| WMA_LOGD("Base MAC Addr: "MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY((*customAddr))); |
| |
| return 0; |
| } |
| |
| static void wma_data_tx_ack_work_handler(struct work_struct *ack_work) |
| { |
| struct wma_tx_ack_work_ctx *work; |
| tp_wma_handle wma_handle; |
| pWDAAckFnTxComp ack_cb; |
| |
| if (vos_is_load_unload_in_progress(VOS_MODULE_ID_WDA, NULL)) { |
| WMA_LOGE("%s: Driver load/unload in progress", __func__); |
| return; |
| } |
| |
| work = container_of(ack_work, struct wma_tx_ack_work_ctx, ack_cmp_work); |
| wma_handle = work->wma_handle; |
| ack_cb = wma_handle->umac_data_ota_ack_cb; |
| |
| if (work->status) |
| WMA_LOGE("Data Tx Ack Cb Status %d", work->status); |
| else |
| WMA_LOGD("Data Tx Ack Cb Status %d", work->status); |
| |
| /* Call the Ack Cb registered by UMAC */ |
| if (ack_cb) |
| ack_cb((tpAniSirGlobal)(wma_handle->mac_context), |
| work->status ? 0 : 1); |
| else |
| WMA_LOGE("Data Tx Ack Cb is NULL"); |
| |
| wma_handle->umac_data_ota_ack_cb = NULL; |
| wma_handle->last_umac_data_nbuf = NULL; |
| adf_os_mem_free(work); |
| wma_handle->ack_work_ctx = NULL; |
| } |
| |
| /** |
| * wma_data_tx_ack_comp_hdlr - handles tx data ack completion |
| * @context: context with which the handler is registered |
| * @netbuf: tx data nbuf |
| * @err: status of tx completion |
| * |
| * This is the cb registered with TxRx for |
| * Ack Complete |
| */ |
| static void |
| wma_data_tx_ack_comp_hdlr(void *wma_context, |
| adf_nbuf_t netbuf, int32_t status) |
| { |
| ol_txrx_pdev_handle pdev; |
| tp_wma_handle wma_handle = (tp_wma_handle)wma_context; |
| |
| if (NULL == wma_handle) { |
| WMA_LOGE("%s: Invalid WMA Handle", __func__); |
| return; |
| } |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma_handle->vos_context); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to get pdev", __func__); |
| return; |
| } |
| |
| /* |
| * if netBuf does not match with pending nbuf then just free the |
| * netbuf and do not call ack cb |
| */ |
| if (wma_handle->last_umac_data_nbuf != netbuf) { |
| if (wma_handle->umac_data_ota_ack_cb) { |
| WMA_LOGE("%s: nbuf does not match but umac_data_ota_ack_cb is not null", |
| __func__); |
| } else { |
| WMA_LOGE("%s: nbuf does not match and umac_data_ota_ack_cb is also null", |
| __func__); |
| } |
| goto free_nbuf; |
| } |
| |
| if(wma_handle && wma_handle->umac_data_ota_ack_cb) { |
| struct wma_tx_ack_work_ctx *ack_work; |
| |
| ack_work = |
| adf_os_mem_alloc(NULL, sizeof(struct wma_tx_ack_work_ctx)); |
| wma_handle->ack_work_ctx = ack_work; |
| if(ack_work) { |
| vos_init_work(&ack_work->ack_cmp_work, |
| wma_data_tx_ack_work_handler); |
| ack_work->wma_handle = wma_handle; |
| ack_work->sub_type = 0; |
| ack_work->status = status; |
| |
| /* Schedue the Work */ |
| schedule_work(&ack_work->ack_cmp_work); |
| } |
| } |
| |
| free_nbuf: |
| /* unmap and freeing the tx buf as txrx is not taking care */ |
| adf_nbuf_unmap_single(pdev->osdev, netbuf, ADF_OS_DMA_TO_DEVICE); |
| adf_nbuf_free(netbuf); |
| } |
| |
| static int wma_add_clear_mcbc_filter(tp_wma_handle wma_handle, uint8_t vdev_id, |
| tSirMacAddr multicastAddr, bool clearList) |
| { |
| WMI_SET_MCASTBCAST_FILTER_CMD_fixed_param *cmd; |
| wmi_buf_t buf; |
| int err; |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, sizeof(*cmd)); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate buffer to send set_param cmd"); |
| return -ENOMEM; |
| } |
| |
| cmd = (WMI_SET_MCASTBCAST_FILTER_CMD_fixed_param *) wmi_buf_data(buf); |
| vos_mem_zero(cmd, sizeof(*cmd)); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_SET_MCASTBCAST_FILTER_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| WMI_SET_MCASTBCAST_FILTER_CMD_fixed_param)); |
| cmd->action = (clearList? WMI_MCAST_FILTER_DELETE : WMI_MCAST_FILTER_SET); |
| cmd->vdev_id = vdev_id; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(multicastAddr, &cmd->mcastbdcastaddr); |
| err = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| sizeof(*cmd), WMI_SET_MCASTBCAST_FILTER_CMDID); |
| if (err) { |
| WMA_LOGE("Failed to send set_param cmd"); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| WMA_LOGD("Action:%d; vdev_id:%d; clearList:%d\n", |
| cmd->action, vdev_id, clearList); |
| WMA_LOGD("MCBC MAC Addr: %0x:%0x:%0x:%0x:%0x:%0x\n", |
| multicastAddr[0], multicastAddr[1], multicastAddr[2], |
| multicastAddr[3], multicastAddr[4], multicastAddr[5]); |
| return 0; |
| } |
| |
| static VOS_STATUS wma_process_mcbc_set_filter_req(tp_wma_handle wma_handle, |
| tSirRcvFltMcAddrList *mcbc_param) |
| { |
| uint8_t vdev_id = 0; |
| int i; |
| |
| if (mcbc_param->ulMulticastAddrCnt <= 0 || |
| mcbc_param->ulMulticastAddrCnt > |
| CFG_TGT_MAX_MULTICAST_FILTER_ENTRIES) { |
| WMA_LOGE("Number of multicast addresses: %u", |
| mcbc_param->ulMulticastAddrCnt); |
| WARN_ON(1); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| if (!wma_find_vdev_by_addr(wma_handle, mcbc_param->selfMacAddr, &vdev_id)) { |
| WMA_LOGE("%s: Failed to find vdev id for %pM", |
| __func__, mcbc_param->bssId); |
| return VOS_STATUS_E_FAILURE; |
| } |
| /* set mcbc_param->action to clear MCList and reset |
| * to configure the MCList in FW |
| */ |
| |
| for (i = 0; i < mcbc_param->ulMulticastAddrCnt; i++) { |
| wma_add_clear_mcbc_filter(wma_handle, vdev_id, |
| mcbc_param->multicastAddr[i], |
| (mcbc_param->action == 0)); |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| #ifdef WLAN_FEATURE_GTK_OFFLOAD |
| #define GTK_OFFLOAD_ENABLE 0 |
| #define GTK_OFFLOAD_DISABLE 1 |
| |
| static VOS_STATUS wma_send_gtk_offload_req(tp_wma_handle wma, u_int8_t vdev_id, |
| tpSirGtkOffloadParams params) |
| { |
| int len; |
| wmi_buf_t buf; |
| WMI_GTK_OFFLOAD_CMD_fixed_param *cmd; |
| VOS_STATUS status = VOS_STATUS_SUCCESS; |
| |
| WMA_LOGD("%s Enter", __func__); |
| |
| len = sizeof(*cmd); |
| |
| /* alloc wmi buffer */ |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("wmi_buf_alloc failed for WMI_GTK_OFFLOAD_CMD"); |
| status = VOS_STATUS_E_NOMEM; |
| goto out; |
| } |
| |
| cmd = (WMI_GTK_OFFLOAD_CMD_fixed_param *)wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_GTK_OFFLOAD_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| WMI_GTK_OFFLOAD_CMD_fixed_param)); |
| |
| cmd->vdev_id = vdev_id; |
| |
| /* Request target to enable GTK offload */ |
| if (params->ulFlags == GTK_OFFLOAD_ENABLE) { |
| cmd->flags = GTK_OFFLOAD_ENABLE_OPCODE; |
| wma->wow.gtk_err_enable[vdev_id] = TRUE; |
| |
| /* Copy the keys and replay counter */ |
| vos_mem_copy(cmd->KCK, params->aKCK, GTK_OFFLOAD_KCK_BYTES); |
| vos_mem_copy(cmd->KEK, params->aKEK, GTK_OFFLOAD_KEK_BYTES); |
| vos_mem_copy(cmd->replay_counter, ¶ms->ullKeyReplayCounter, |
| GTK_REPLAY_COUNTER_BYTES); |
| } else { |
| wma->wow.gtk_err_enable[vdev_id] = FALSE; |
| cmd->flags = GTK_OFFLOAD_DISABLE_OPCODE; |
| } |
| |
| /* send the wmi command */ |
| if (wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_GTK_OFFLOAD_CMDID)) { |
| WMA_LOGE("Failed to send WMI_GTK_OFFLOAD_CMDID"); |
| wmi_buf_free(buf); |
| status = VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("VDEVID: %d, GTK_FLAGS: x%x", vdev_id, cmd->flags); |
| out: |
| WMA_LOGD("%s Exit", __func__); |
| return status; |
| } |
| |
| static VOS_STATUS wma_process_gtk_offload_req(tp_wma_handle wma, |
| tpSirGtkOffloadParams params) |
| { |
| u_int8_t vdev_id; |
| VOS_STATUS status = VOS_STATUS_SUCCESS; |
| |
| WMA_LOGD("%s Enter", __func__); |
| |
| /* Get the vdev id */ |
| if (!wma_find_vdev_by_bssid(wma, params->bssId, &vdev_id)) { |
| WMA_LOGE("vdev handle is invalid for %pM", params->bssId); |
| status = VOS_STATUS_E_INVAL; |
| goto out; |
| } |
| |
| /* Validate vdev id */ |
| if (vdev_id >= wma->max_bssid){ |
| WMA_LOGE("invalid vdev_id %d for %pM", vdev_id, params->bssId); |
| status = VOS_STATUS_E_INVAL; |
| goto out; |
| } |
| |
| if ((params->ulFlags == GTK_OFFLOAD_ENABLE) && |
| (wma->wow.gtk_err_enable[vdev_id] == TRUE)) { |
| WMA_LOGE("%s GTK Offload already enabled. Disable it first " |
| "vdev_id %d", __func__, vdev_id); |
| params->ulFlags = GTK_OFFLOAD_DISABLE; |
| status = wma_send_gtk_offload_req(wma, vdev_id, params); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s Failed to disable GTK Offload", __func__); |
| goto out; |
| } |
| WMA_LOGD("%s Enable GTK Offload again with updated inputs", |
| __func__); |
| params->ulFlags = GTK_OFFLOAD_ENABLE; |
| } |
| status = wma_send_gtk_offload_req(wma, vdev_id, params); |
| out: |
| vos_mem_free(params); |
| WMA_LOGD("%s Exit", __func__); |
| return status; |
| } |
| |
| static VOS_STATUS wma_process_gtk_offload_getinfo_req(tp_wma_handle wma, |
| tpSirGtkOffloadGetInfoRspParams params) |
| { |
| u_int8_t vdev_id; |
| int len; |
| wmi_buf_t buf; |
| WMI_GTK_OFFLOAD_CMD_fixed_param *cmd; |
| VOS_STATUS status = VOS_STATUS_SUCCESS; |
| |
| WMA_LOGD("%s Enter", __func__); |
| |
| /* Get the vdev id */ |
| if (!wma_find_vdev_by_bssid(wma, params->bssId, &vdev_id)) { |
| WMA_LOGE("vdev handle is invalid for %pM", params->bssId); |
| status = VOS_STATUS_E_INVAL; |
| goto out; |
| } |
| |
| len = sizeof(*cmd); |
| |
| /* alloc wmi buffer */ |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("wmi_buf_alloc failed for WMI_GTK_OFFLOAD_CMD"); |
| status = VOS_STATUS_E_NOMEM; |
| goto out; |
| } |
| |
| cmd = (WMI_GTK_OFFLOAD_CMD_fixed_param *)wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_GTK_OFFLOAD_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| WMI_GTK_OFFLOAD_CMD_fixed_param)); |
| |
| /* Request for GTK offload status */ |
| cmd->flags = GTK_OFFLOAD_REQUEST_STATUS_OPCODE; |
| cmd->vdev_id = vdev_id; |
| |
| /* send the wmi command */ |
| if (wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_GTK_OFFLOAD_CMDID)) { |
| WMA_LOGE("Failed to send WMI_GTK_OFFLOAD_CMDID for req info"); |
| wmi_buf_free(buf); |
| status = VOS_STATUS_E_FAILURE; |
| } |
| out: |
| vos_mem_free(params); |
| WMA_LOGD("%s Exit", __func__); |
| return status; |
| } |
| #endif |
| |
| /** |
| * wma_fill_arp_offload_params() - Fill ARP offload data |
| * @wma: wma handle |
| * @tpSirHostOffloadReq: offload request |
| * @buf_ptr: buffer pointer |
| * |
| * To fill ARP offload data to firmware |
| * when target goes to wow mode. |
| * |
| * Return: None |
| */ |
| static void wma_fill_arp_offload_params(tp_wma_handle wma, |
| tpSirHostOffloadReq hostoffloadreq, uint8_t **buf_ptr) |
| { |
| |
| int32_t i; |
| WMI_ARP_OFFLOAD_TUPLE *arp_tuple; |
| bool enableOrDisable = hostoffloadreq->enableOrDisable; |
| |
| WMITLV_SET_HDR(*buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| (WMI_MAX_ARP_OFFLOADS*sizeof(WMI_ARP_OFFLOAD_TUPLE))); |
| *buf_ptr += WMI_TLV_HDR_SIZE; |
| for (i = 0; i < WMI_MAX_ARP_OFFLOADS; i++) { |
| arp_tuple = (WMI_ARP_OFFLOAD_TUPLE *)*buf_ptr; |
| WMITLV_SET_HDR(&arp_tuple->tlv_header, |
| WMITLV_TAG_STRUC_WMI_ARP_OFFLOAD_TUPLE, |
| WMITLV_GET_STRUCT_TLVLEN(WMI_ARP_OFFLOAD_TUPLE)); |
| |
| /* Fill data for ARP and NS in the first tupple for LA */ |
| if ((enableOrDisable & SIR_OFFLOAD_ENABLE) && (i == 0)) { |
| /* Copy the target ip addr and flags */ |
| arp_tuple->flags = WMI_ARPOFF_FLAGS_VALID; |
| A_MEMCPY(&arp_tuple->target_ipaddr, |
| hostoffloadreq->params.hostIpv4Addr, |
| SIR_IPV4_ADDR_LEN); |
| WMA_LOGD("ARPOffload IP4 address: %pI4", |
| hostoffloadreq->params.hostIpv4Addr); |
| } |
| *buf_ptr += sizeof(WMI_ARP_OFFLOAD_TUPLE); |
| } |
| } |
| |
| #ifdef WLAN_NS_OFFLOAD |
| /** |
| * wma_fill_ns_offload_params() - Fill NS offload data |
| * @wma: wma handle |
| * @tpSirHostOffloadReq: offload request |
| * @buf_ptr: buffer pointer |
| * |
| * To fill NS offload data to firmware |
| * when target goes to wow mode. |
| * |
| * Return: None |
| */ |
| static void wma_fill_ns_offload_params(tp_wma_handle wma, |
| tpSirHostOffloadReq hostoffloadreq, uint8_t **buf_ptr) |
| { |
| |
| int32_t i; |
| WMI_NS_OFFLOAD_TUPLE *ns_tuple; |
| tSirNsOffloadReq ns_req; |
| |
| ns_req = hostoffloadreq->nsOffloadInfo; |
| WMITLV_SET_HDR(*buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| (WMI_MAX_NS_OFFLOADS*sizeof(WMI_NS_OFFLOAD_TUPLE))); |
| *buf_ptr += WMI_TLV_HDR_SIZE; |
| for (i = 0; i < WMI_MAX_NS_OFFLOADS; i++) { |
| ns_tuple = (WMI_NS_OFFLOAD_TUPLE *)*buf_ptr; |
| WMITLV_SET_HDR(&ns_tuple->tlv_header, |
| WMITLV_TAG_STRUC_WMI_NS_OFFLOAD_TUPLE, |
| (sizeof(WMI_NS_OFFLOAD_TUPLE) - WMI_TLV_HDR_SIZE)); |
| |
| /* |
| * Fill data only for NS offload in the first ARP tuple for LA |
| */ |
| if ((hostoffloadreq->enableOrDisable & SIR_OFFLOAD_ENABLE)) { |
| ns_tuple->flags |= WMI_NSOFF_FLAGS_VALID; |
| /* Copy the target/solicitation/remote ip addr */ |
| if (ns_req.targetIPv6AddrValid[i]) |
| A_MEMCPY(&ns_tuple->target_ipaddr[0], |
| &ns_req.targetIPv6Addr[i], |
| sizeof(WMI_IPV6_ADDR)); |
| A_MEMCPY(&ns_tuple->solicitation_ipaddr, |
| &ns_req.selfIPv6Addr[i], |
| sizeof(WMI_IPV6_ADDR)); |
| if (ns_req.target_ipv6_addr_type[i]) { |
| ns_tuple->flags |= |
| WMI_NSOFF_FLAGS_IS_IPV6_ANYCAST; |
| } |
| WMA_LOGD("Index %d NS solicitedIp %pI6, targetIp %pI6", |
| i, &ns_req.selfIPv6Addr[i], |
| &ns_req.targetIPv6Addr[i]); |
| |
| /* target MAC is optional, check if it is valid, |
| * if this is not valid, the target will use the known |
| * local MAC address rather than the tuple |
| */ |
| WMI_CHAR_ARRAY_TO_MAC_ADDR( |
| ns_req.selfMacAddr, |
| &ns_tuple->target_mac); |
| if ((ns_tuple->target_mac.mac_addr31to0 != 0) || |
| (ns_tuple->target_mac.mac_addr47to32 != 0)) { |
| ns_tuple->flags |= WMI_NSOFF_FLAGS_MAC_VALID; |
| } |
| } |
| *buf_ptr += sizeof(WMI_NS_OFFLOAD_TUPLE); |
| } |
| } |
| |
| |
| /** |
| * wma_fill_nsoffload_ext() - Fill NS offload ext data |
| * @wma: wma handle |
| * @tpSirHostOffloadReq: offload request |
| * @buf_ptr: buffer pointer |
| * |
| * To fill extended NS offload extended data to firmware |
| * when target goes to wow mode. |
| * |
| * Return: None |
| */ |
| static void wma_fill_nsoffload_ext(tp_wma_handle wma, tpSirHostOffloadReq |
| hostoffloadreq, uint8_t **buf_ptr) |
| { |
| int32_t i; |
| WMI_NS_OFFLOAD_TUPLE *ns_tuple; |
| uint32_t count, num_ns_ext_tuples; |
| tSirNsOffloadReq ns_req; |
| |
| ns_req = hostoffloadreq->nsOffloadInfo; |
| count = hostoffloadreq->num_ns_offload_count; |
| num_ns_ext_tuples = hostoffloadreq->num_ns_offload_count - |
| WMI_MAX_NS_OFFLOADS; |
| |
| /* Populate extended NS offload tuples */ |
| WMITLV_SET_HDR(*buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| (num_ns_ext_tuples * sizeof(WMI_NS_OFFLOAD_TUPLE))); |
| *buf_ptr += WMI_TLV_HDR_SIZE; |
| for (i = WMI_MAX_NS_OFFLOADS; i < count; i++) { |
| ns_tuple = (WMI_NS_OFFLOAD_TUPLE *)*buf_ptr; |
| WMITLV_SET_HDR(&ns_tuple->tlv_header, |
| WMITLV_TAG_STRUC_WMI_NS_OFFLOAD_TUPLE, |
| (sizeof(WMI_NS_OFFLOAD_TUPLE)-WMI_TLV_HDR_SIZE)); |
| |
| /* |
| * Fill data only for NS offload in the first ARP tuple for LA |
| */ |
| if ((hostoffloadreq->enableOrDisable & SIR_OFFLOAD_ENABLE)) { |
| ns_tuple->flags |= WMI_NSOFF_FLAGS_VALID; |
| /* Copy the target/solicitation/remote ip addr */ |
| if (ns_req.targetIPv6AddrValid[i]) |
| A_MEMCPY(&ns_tuple->target_ipaddr[0], |
| &ns_req.targetIPv6Addr[i], |
| sizeof(WMI_IPV6_ADDR)); |
| A_MEMCPY(&ns_tuple->solicitation_ipaddr, |
| &ns_req.selfIPv6Addr[i], |
| sizeof(WMI_IPV6_ADDR)); |
| if (ns_req.target_ipv6_addr_type[i]) { |
| ns_tuple->flags |= |
| WMI_NSOFF_FLAGS_IS_IPV6_ANYCAST; |
| } |
| WMA_LOGD("Index %d NS solicitedIp %pI6, targetIp %pI6", |
| i, &ns_req.selfIPv6Addr[i], |
| &ns_req.targetIPv6Addr[i]); |
| |
| /* target MAC is optional, check if it is valid, |
| * if this is not valid, the target will use the |
| * known local MAC address rather than the tuple |
| */ |
| WMI_CHAR_ARRAY_TO_MAC_ADDR( |
| ns_req.selfMacAddr, |
| &ns_tuple->target_mac); |
| if ((ns_tuple->target_mac.mac_addr31to0 != 0) || |
| (ns_tuple->target_mac.mac_addr47to32 != 0)) { |
| ns_tuple->flags |= WMI_NSOFF_FLAGS_MAC_VALID; |
| } |
| } |
| *buf_ptr += sizeof(WMI_NS_OFFLOAD_TUPLE); |
| } |
| } |
| #else |
| static inline void wma_fill_ns_offload_params(tp_wma_handle wma, |
| tpSirHostOffloadReq hostoffloadreq, uint8_t **buf_ptr) |
| { |
| return; |
| } |
| |
| static inline void wma_fill_nsoffload_ext(tp_wma_handle wma, |
| tpSirHostOffloadReq hostoffloadreq, uint8_t **buf_ptr) |
| { |
| return; |
| } |
| #endif |
| |
| |
| /** |
| * wma_enable_arp_ns_offload() - enable ARP NS offload |
| * @wma: wma handle |
| * @tpSirHostOffloadReq: offload request |
| * @config_arp: flag |
| * |
| * To configure ARP NS off load data to firmware |
| * when target goes to wow mode. |
| * |
| * Return: VOS Status |
| */ |
| static VOS_STATUS wma_enable_arp_ns_offload(tp_wma_handle wma, |
| tpSirHostOffloadReq hostoffloadreq, bool config_arp) |
| { |
| int32_t res; |
| WMI_SET_ARP_NS_OFFLOAD_CMD_fixed_param *cmd; |
| A_UINT8* buf_ptr; |
| wmi_buf_t buf; |
| uint32_t len; |
| VOS_STATUS status = VOS_STATUS_SUCCESS; |
| u_int8_t vdev_id; |
| tpSirHostOffloadReq ns_offload_req; |
| tpSirHostOffloadReq arp_offload_req; |
| uint32_t count = 0, num_ns_ext_tuples = 0; |
| |
| /* Get the vdev id */ |
| if (!wma_find_vdev_by_bssid(wma, hostoffloadreq->bssId, &vdev_id)) { |
| WMA_LOGE("Invalid vdev handle for %pM", hostoffloadreq->bssId); |
| status = VOS_STATUS_E_FAILURE; |
| goto err_vdev; |
| } |
| |
| if (!wma->interfaces[vdev_id].vdev_up) { |
| WMA_LOGE("vdev %d is not up skipping arp/ns offload", vdev_id); |
| status = VOS_STATUS_E_FAILURE; |
| goto err_vdev; |
| } |
| |
| /* |
| * config_arp is true means arp request comes from upper layer |
| * Hence ns request need to used from wma cached request. |
| */ |
| if (config_arp) { |
| arp_offload_req = hostoffloadreq; |
| ns_offload_req = &wma->interfaces[vdev_id].ns_offload_req; |
| count = ns_offload_req->num_ns_offload_count; |
| } else { |
| ns_offload_req = hostoffloadreq; |
| arp_offload_req = &wma->interfaces[vdev_id].arp_offload_req; |
| count = hostoffloadreq->num_ns_offload_count; |
| } |
| |
| if (count >= SIR_MAC_NUM_TARGET_IPV6_NS_OFFLOAD_NA) { |
| status = VOS_STATUS_E_INVAL; |
| goto err_vdev; |
| } |
| |
| len = sizeof(WMI_SET_ARP_NS_OFFLOAD_CMD_fixed_param) + |
| WMI_TLV_HDR_SIZE + /* Add size for array of NS tuples */ |
| WMI_MAX_NS_OFFLOADS*sizeof(WMI_NS_OFFLOAD_TUPLE) + |
| WMI_TLV_HDR_SIZE + /* Add size for array of ARP tuples */ |
| WMI_MAX_ARP_OFFLOADS*sizeof(WMI_ARP_OFFLOAD_TUPLE); |
| |
| if (count > WMI_MAX_NS_OFFLOADS) { |
| num_ns_ext_tuples = count - WMI_MAX_NS_OFFLOADS; |
| len += WMI_TLV_HDR_SIZE + num_ns_ext_tuples |
| * sizeof(WMI_NS_OFFLOAD_TUPLE); |
| } |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| status = VOS_STATUS_E_NOMEM; |
| goto err_vdev; |
| } |
| |
| buf_ptr = (A_UINT8*)wmi_buf_data(buf); |
| |
| cmd = (WMI_SET_ARP_NS_OFFLOAD_CMD_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_SET_ARP_NS_OFFLOAD_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| WMI_SET_ARP_NS_OFFLOAD_CMD_fixed_param)); |
| cmd->flags = 0; |
| cmd->vdev_id = vdev_id; |
| cmd->num_ns_ext_tuples = num_ns_ext_tuples; |
| |
| buf_ptr += sizeof(WMI_SET_ARP_NS_OFFLOAD_CMD_fixed_param); |
| if (config_arp) |
| WMA_LOGD(" %s: ARP Offload vdev_id: %d enable: %d ns_count: %u", |
| __func__, cmd->vdev_id, |
| hostoffloadreq->enableOrDisable, |
| hostoffloadreq->num_ns_offload_count); |
| else |
| WMA_LOGD(" %s: NS Offload vdev_id: %d enable: %d ns_count: %u", |
| __func__, cmd->vdev_id, |
| hostoffloadreq->enableOrDisable, |
| hostoffloadreq->num_ns_offload_count); |
| |
| wma_fill_ns_offload_params(wma, ns_offload_req, &buf_ptr); |
| wma_fill_arp_offload_params(wma, arp_offload_req, &buf_ptr); |
| if (count > WMI_MAX_NS_OFFLOADS) |
| wma_fill_nsoffload_ext(wma, ns_offload_req, &buf_ptr); |
| |
| res = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_SET_ARP_NS_OFFLOAD_CMDID); |
| if (res) { |
| WMA_LOGW("Failed to enable ARP NDP/NSffload"); |
| goto err_cmd_send; |
| } |
| |
| if (config_arp) { |
| vos_mem_copy(&wma->interfaces[vdev_id].arp_offload_req, |
| hostoffloadreq, sizeof(tSirHostOffloadReq)); |
| } else { |
| vos_mem_copy(&wma->interfaces[vdev_id].ns_offload_req, |
| hostoffloadreq, sizeof(tSirHostOffloadReq)); |
| } |
| |
| vos_mem_free(hostoffloadreq); |
| return status; |
| err_cmd_send: |
| wmi_buf_free(buf); |
| err_vdev: |
| vos_mem_free(hostoffloadreq); |
| return status; |
| } |
| |
| typedef struct { |
| int32_t rate; |
| tANI_U8 flag; |
| } wma_search_rate_t; |
| |
| #define WMA_MAX_OFDM_CCK_RATE_TBL_SIZE 12 |
| /* In ofdm_cck_rate_tbl->flag, if bit 7 is 1 it's CCK, otherwise it ofdm. |
| * Lower bit carries the ofdm/cck index for encoding the rate */ |
| static wma_search_rate_t ofdm_cck_rate_tbl[WMA_MAX_OFDM_CCK_RATE_TBL_SIZE] = { |
| {540, 4}, /* 4: OFDM 54 Mbps */ |
| {480, 0}, /* 0: OFDM 48 Mbps */ |
| {360, 5}, /* 5: OFDM 36 Mbps */ |
| {240, 1}, /* 1: OFDM 24 Mbps */ |
| {180, 6}, /* 6: OFDM 18 Mbps */ |
| {120, 2}, /* 2: OFDM 12 Mbps */ |
| {110, (1 << 7)}, /* 0: CCK 11 Mbps Long */ |
| {90, 7}, /* 7: OFDM 9 Mbps */ |
| {60, 3}, /* 3: OFDM 6 Mbps */ |
| {55, ((1 << 7)|1)}, /* 1: CCK 5.5 Mbps Long */ |
| {20, ((1 << 7)|2)}, /* 2: CCK 2 Mbps Long */ |
| {10, ((1 << 7)|3)} /* 3: CCK 1 Mbps Long */ |
| }; |
| |
| #define WMA_MAX_VHT20_RATE_TBL_SIZE 9 |
| /* In vht20_400ns_rate_tbl flag carries the mcs index for encoding the rate */ |
| static wma_search_rate_t vht20_400ns_rate_tbl[WMA_MAX_VHT20_RATE_TBL_SIZE] = { |
| {867, 8}, /* MCS8 1SS short GI */ |
| {722, 7}, /* MCS7 1SS short GI */ |
| {650, 6}, /* MCS6 1SS short GI */ |
| {578, 5}, /* MCS5 1SS short GI */ |
| {433, 4}, /* MCS4 1SS short GI */ |
| {289, 3}, /* MCS3 1SS short GI */ |
| {217, 2}, /* MCS2 1SS short GI */ |
| {144, 1}, /* MCS1 1SS short GI */ |
| {72, 0} /* MCS0 1SS short GI */ |
| }; |
| /* In vht20_800ns_rate_tbl flag carries the mcs index for encoding the rate */ |
| static wma_search_rate_t vht20_800ns_rate_tbl[WMA_MAX_VHT20_RATE_TBL_SIZE] = { |
| {780, 8}, /* MCS8 1SS long GI */ |
| {650, 7}, /* MCS7 1SS long GI */ |
| {585, 6}, /* MCS6 1SS long GI */ |
| {520, 5}, /* MCS5 1SS long GI */ |
| {390, 4}, /* MCS4 1SS long GI */ |
| {260, 3}, /* MCS3 1SS long GI */ |
| {195, 2}, /* MCS2 1SS long GI */ |
| {130, 1}, /* MCS1 1SS long GI */ |
| {65, 0} /* MCS0 1SS long GI */ |
| }; |
| |
| #define WMA_MAX_VHT40_RATE_TBL_SIZE 10 |
| /* In vht40_400ns_rate_tbl flag carries the mcs index for encoding the rate */ |
| static wma_search_rate_t vht40_400ns_rate_tbl[WMA_MAX_VHT40_RATE_TBL_SIZE] = { |
| {2000, 9}, /* MCS9 1SS short GI */ |
| {1800, 8}, /* MCS8 1SS short GI */ |
| {1500, 7}, /* MCS7 1SS short GI */ |
| {1350, 6}, /* MCS6 1SS short GI */ |
| {1200, 5}, /* MCS5 1SS short GI */ |
| {900, 4}, /* MCS4 1SS short GI */ |
| {600, 3}, /* MCS3 1SS short GI */ |
| {450, 2}, /* MCS2 1SS short GI */ |
| {300, 1}, /* MCS1 1SS short GI */ |
| {150, 0}, /* MCS0 1SS short GI */ |
| }; |
| static wma_search_rate_t vht40_800ns_rate_tbl[WMA_MAX_VHT40_RATE_TBL_SIZE] = { |
| {1800, 9}, /* MCS9 1SS long GI */ |
| {1620, 8}, /* MCS8 1SS long GI */ |
| {1350, 7}, /* MCS7 1SS long GI */ |
| {1215, 6}, /* MCS6 1SS long GI */ |
| {1080, 5}, /* MCS5 1SS long GI */ |
| {810, 4}, /* MCS4 1SS long GI */ |
| {540, 3}, /* MCS3 1SS long GI */ |
| {405, 2}, /* MCS2 1SS long GI */ |
| {270, 1}, /* MCS1 1SS long GI */ |
| {135, 0} /* MCS0 1SS long GI */ |
| }; |
| |
| #define WMA_MAX_VHT80_RATE_TBL_SIZE 10 |
| static wma_search_rate_t vht80_400ns_rate_tbl[WMA_MAX_VHT80_RATE_TBL_SIZE] = { |
| {4333, 9}, /* MCS9 1SS short GI */ |
| {3900, 8}, /* MCS8 1SS short GI */ |
| {3250, 7}, /* MCS7 1SS short GI */ |
| {2925, 6}, /* MCS6 1SS short GI */ |
| {2600, 5}, /* MCS5 1SS short GI */ |
| {1950, 4}, /* MCS4 1SS short GI */ |
| {1300, 3}, /* MCS3 1SS short GI */ |
| {975, 2}, /* MCS2 1SS short GI */ |
| {650, 1}, /* MCS1 1SS short GI */ |
| {325, 0} /* MCS0 1SS short GI */ |
| }; |
| static wma_search_rate_t vht80_800ns_rate_tbl[WMA_MAX_VHT80_RATE_TBL_SIZE] = { |
| {3900, 9}, /* MCS9 1SS long GI */ |
| {3510, 8}, /* MCS8 1SS long GI */ |
| {2925, 7}, /* MCS7 1SS long GI */ |
| {2633, 6}, /* MCS6 1SS long GI */ |
| {2340, 5}, /* MCS5 1SS long GI */ |
| {1755, 4}, /* MCS4 1SS long GI */ |
| {1170, 3}, /* MCS3 1SS long GI */ |
| {878, 2}, /* MCS2 1SS long GI */ |
| {585, 1}, /* MCS1 1SS long GI */ |
| {293, 0} /* MCS0 1SS long GI */ |
| }; |
| |
| #define WMA_MAX_HT20_RATE_TBL_SIZE 8 |
| static wma_search_rate_t ht20_400ns_rate_tbl[WMA_MAX_HT20_RATE_TBL_SIZE] = { |
| {722, 7}, /* MCS7 1SS short GI */ |
| {650, 6}, /* MCS6 1SS short GI */ |
| {578, 5}, /* MCS5 1SS short GI */ |
| {433, 4}, /* MCS4 1SS short GI */ |
| {289, 3}, /* MCS3 1SS short GI */ |
| {217, 2}, /* MCS2 1SS short GI */ |
| {144, 1}, /* MCS1 1SS short GI */ |
| {72, 0} /* MCS0 1SS short GI */ |
| }; |
| static wma_search_rate_t ht20_800ns_rate_tbl[WMA_MAX_HT20_RATE_TBL_SIZE] = { |
| {650, 7}, /* MCS7 1SS long GI */ |
| {585, 6}, /* MCS6 1SS long GI */ |
| {520, 5}, /* MCS5 1SS long GI */ |
| {390, 4}, /* MCS4 1SS long GI */ |
| {260, 3}, /* MCS3 1SS long GI */ |
| {195, 2}, /* MCS2 1SS long GI */ |
| {130, 1}, /* MCS1 1SS long GI */ |
| {65, 0} /* MCS0 1SS long GI */ |
| }; |
| |
| #define WMA_MAX_HT40_RATE_TBL_SIZE 8 |
| static wma_search_rate_t ht40_400ns_rate_tbl[WMA_MAX_HT40_RATE_TBL_SIZE] = { |
| {1500, 7}, /* MCS7 1SS short GI */ |
| {1350, 6}, /* MCS6 1SS short GI */ |
| {1200, 5}, /* MCS5 1SS short GI */ |
| {900, 4}, /* MCS4 1SS short GI */ |
| {600, 3}, /* MCS3 1SS short GI */ |
| {450, 2}, /* MCS2 1SS short GI */ |
| {300, 1}, /* MCS1 1SS short GI */ |
| {150, 0} /* MCS0 1SS short GI */ |
| }; |
| static wma_search_rate_t ht40_800ns_rate_tbl[WMA_MAX_HT40_RATE_TBL_SIZE] = { |
| {1350, 7}, /* MCS7 1SS long GI */ |
| {1215, 6}, /* MCS6 1SS long GI */ |
| {1080, 5}, /* MCS5 1SS long GI */ |
| {810, 4}, /* MCS4 1SS long GI */ |
| {540, 3}, /* MCS3 1SS long GI */ |
| {405, 2}, /* MCS2 1SS long GI */ |
| {270, 1}, /* MCS1 1SS long GI */ |
| {135, 0} /* MCS0 1SS long GI */ |
| }; |
| |
| static void wma_bin_search_rate(wma_search_rate_t *tbl, int32_t tbl_size, |
| tANI_S32 *mbpsx10_rate, tANI_U8 *ret_flag) |
| { |
| int32_t upper, lower, mid; |
| |
| /* the table is descenting. index holds the largest value and the |
| * bottom index holds the smallest value */ |
| |
| upper = 0; /* index 0 */ |
| lower = tbl_size -1; /* last index */ |
| |
| if (*mbpsx10_rate >= tbl[upper].rate) { |
| /* use the largest rate */ |
| *mbpsx10_rate = tbl[upper].rate; |
| *ret_flag = tbl[upper].flag; |
| return; |
| } else if (*mbpsx10_rate <= tbl[lower].rate) { |
| /* use the smallest rate */ |
| *mbpsx10_rate = tbl[lower].rate; |
| *ret_flag = tbl[lower].flag; |
| return; |
| } |
| /* now we do binery search to get the floor value */ |
| while (lower - upper > 1) { |
| mid = (upper + lower) >> 1; |
| if (*mbpsx10_rate == tbl[mid].rate) { |
| /* found the exact match */ |
| *mbpsx10_rate = tbl[mid].rate; |
| *ret_flag = tbl[mid].flag; |
| return; |
| } else { |
| /* not found. if mid's rate is larger than input move |
| * upper to mid. If mid's rate is larger than input |
| * move lower to mid. */ |
| if (*mbpsx10_rate > tbl[mid].rate) |
| lower = mid; |
| else |
| upper = mid; |
| } |
| } |
| /* after the bin search the index is the ceiling of rate */ |
| *mbpsx10_rate = tbl[upper].rate; |
| *ret_flag = tbl[upper].flag; |
| return; |
| } |
| |
| static VOS_STATUS wma_fill_ofdm_cck_mcast_rate(tANI_S32 mbpsx10_rate, |
| tANI_U8 nss, tANI_U8 *rate) |
| { |
| tANI_U8 idx = 0; |
| wma_bin_search_rate(ofdm_cck_rate_tbl, WMA_MAX_OFDM_CCK_RATE_TBL_SIZE, |
| &mbpsx10_rate, &idx); |
| |
| /* if bit 7 is set it uses CCK */ |
| if (idx & 0x80) |
| *rate |= (1 << 6) | (idx & 0xF); /* set bit 6 to 1 for CCK */ |
| else |
| *rate |= (idx & 0xF); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static void wma_set_ht_vht_mcast_rate(u_int32_t shortgi, tANI_S32 mbpsx10_rate, |
| tANI_U8 sgi_idx, tANI_S32 sgi_rate, tANI_U8 lgi_idx, tANI_S32 lgi_rate, |
| tANI_U8 premable, tANI_U8 *rate, tANI_S32 *streaming_rate) |
| { |
| if (shortgi == 0) { |
| *rate |= (premable << 6) | (lgi_idx & 0xF); |
| *streaming_rate = lgi_rate; |
| } else { |
| *rate |= (premable << 6) | (sgi_idx & 0xF); |
| *streaming_rate = sgi_rate; |
| } |
| } |
| |
| static VOS_STATUS wma_fill_ht20_mcast_rate(u_int32_t shortgi, |
| tANI_S32 mbpsx10_rate, tANI_U8 nss, tANI_U8 *rate, |
| tANI_S32 *streaming_rate) |
| { |
| tANI_U8 sgi_idx = 0, lgi_idx = 0; |
| tANI_S32 sgi_rate, lgi_rate; |
| if (nss == 1) |
| mbpsx10_rate= mbpsx10_rate >> 1; |
| |
| sgi_rate = mbpsx10_rate; |
| lgi_rate = mbpsx10_rate; |
| if (shortgi) |
| wma_bin_search_rate(ht20_400ns_rate_tbl, |
| WMA_MAX_HT20_RATE_TBL_SIZE, &sgi_rate, &sgi_idx); |
| else |
| wma_bin_search_rate(ht20_800ns_rate_tbl, |
| WMA_MAX_HT20_RATE_TBL_SIZE, &lgi_rate, &lgi_idx); |
| |
| wma_set_ht_vht_mcast_rate(shortgi, mbpsx10_rate, sgi_idx, sgi_rate, |
| lgi_idx, lgi_rate, 2, rate, streaming_rate); |
| if (nss == 1) |
| *streaming_rate = *streaming_rate << 1; |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static VOS_STATUS wma_fill_ht40_mcast_rate(u_int32_t shortgi, |
| tANI_S32 mbpsx10_rate, tANI_U8 nss, tANI_U8 *rate, |
| tANI_S32 *streaming_rate) |
| { |
| tANI_U8 sgi_idx = 0, lgi_idx = 0; |
| tANI_S32 sgi_rate, lgi_rate; |
| |
| /* for 2x2 divide the rate by 2 */ |
| if (nss == 1) |
| mbpsx10_rate= mbpsx10_rate >> 1; |
| |
| sgi_rate = mbpsx10_rate; |
| lgi_rate = mbpsx10_rate; |
| if (shortgi) |
| wma_bin_search_rate(ht40_400ns_rate_tbl, |
| WMA_MAX_HT40_RATE_TBL_SIZE, &sgi_rate, &sgi_idx); |
| else |
| wma_bin_search_rate(ht40_800ns_rate_tbl, |
| WMA_MAX_HT40_RATE_TBL_SIZE, &lgi_rate, &lgi_idx); |
| |
| wma_set_ht_vht_mcast_rate(shortgi, mbpsx10_rate, sgi_idx, sgi_rate, |
| lgi_idx, lgi_rate, 2, rate, streaming_rate); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static VOS_STATUS wma_fill_vht20_mcast_rate(u_int32_t shortgi, |
| tANI_S32 mbpsx10_rate, tANI_U8 nss, tANI_U8 *rate, |
| tANI_S32 *streaming_rate) |
| { |
| tANI_U8 sgi_idx = 0, lgi_idx = 0; |
| tANI_S32 sgi_rate, lgi_rate; |
| |
| /* for 2x2 divide the rate by 2 */ |
| if (nss == 1) |
| mbpsx10_rate= mbpsx10_rate >> 1; |
| |
| sgi_rate = mbpsx10_rate; |
| lgi_rate = mbpsx10_rate; |
| if (shortgi) |
| wma_bin_search_rate(vht20_400ns_rate_tbl, |
| WMA_MAX_VHT20_RATE_TBL_SIZE, &sgi_rate, &sgi_idx); |
| else |
| wma_bin_search_rate(vht20_800ns_rate_tbl, |
| WMA_MAX_VHT20_RATE_TBL_SIZE, &lgi_rate, &lgi_idx); |
| |
| wma_set_ht_vht_mcast_rate(shortgi, mbpsx10_rate, sgi_idx, sgi_rate, |
| lgi_idx, lgi_rate, 3, rate, streaming_rate); |
| if (nss == 1) |
| *streaming_rate = *streaming_rate << 1; |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static VOS_STATUS wma_fill_vht40_mcast_rate(u_int32_t shortgi, |
| tANI_S32 mbpsx10_rate, tANI_U8 nss, tANI_U8 *rate, |
| tANI_S32 *streaming_rate) |
| { |
| tANI_U8 sgi_idx = 0, lgi_idx = 0; |
| tANI_S32 sgi_rate, lgi_rate; |
| |
| /* for 2x2 divide the rate by 2 */ |
| if (nss == 1) |
| mbpsx10_rate= mbpsx10_rate >> 1; |
| |
| sgi_rate = mbpsx10_rate; |
| lgi_rate = mbpsx10_rate; |
| if (shortgi) |
| wma_bin_search_rate(vht40_400ns_rate_tbl, |
| WMA_MAX_VHT40_RATE_TBL_SIZE, &sgi_rate, &sgi_idx); |
| else |
| wma_bin_search_rate(vht40_800ns_rate_tbl, |
| WMA_MAX_VHT40_RATE_TBL_SIZE, &lgi_rate, &lgi_idx); |
| |
| wma_set_ht_vht_mcast_rate(shortgi, mbpsx10_rate, |
| sgi_idx, sgi_rate, lgi_idx, lgi_rate, |
| 3, rate, streaming_rate); |
| if (nss == 1) |
| *streaming_rate = *streaming_rate << 1; |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static VOS_STATUS wma_fill_vht80_mcast_rate(u_int32_t shortgi, |
| tANI_S32 mbpsx10_rate, tANI_U8 nss, tANI_U8 *rate, |
| tANI_S32 *streaming_rate) |
| { |
| tANI_U8 sgi_idx = 0, lgi_idx = 0; |
| tANI_S32 sgi_rate, lgi_rate; |
| |
| /* for 2x2 divide the rate by 2 */ |
| if (nss == 1) |
| mbpsx10_rate= mbpsx10_rate >> 1; |
| |
| sgi_rate = mbpsx10_rate; |
| lgi_rate = mbpsx10_rate; |
| if (shortgi) |
| wma_bin_search_rate(vht80_400ns_rate_tbl, |
| WMA_MAX_VHT80_RATE_TBL_SIZE, &sgi_rate, &sgi_idx); |
| else |
| wma_bin_search_rate(vht80_800ns_rate_tbl, |
| WMA_MAX_VHT80_RATE_TBL_SIZE, &lgi_rate, &lgi_idx); |
| |
| wma_set_ht_vht_mcast_rate(shortgi, mbpsx10_rate, sgi_idx, sgi_rate, |
| lgi_idx, lgi_rate, 3, rate, streaming_rate); |
| if (nss == 1) |
| *streaming_rate = *streaming_rate << 1; |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static VOS_STATUS wma_fill_ht_mcast_rate(u_int32_t shortgi, |
| u_int32_t chwidth, tANI_S32 mbpsx10_rate, tANI_U8 nss, |
| WLAN_PHY_MODE chanmode, tANI_U8 *rate, tANI_S32 *streaming_rate) |
| { |
| int32_t ret = 0; |
| |
| *streaming_rate = 0; |
| if (chwidth== 0) |
| ret = wma_fill_ht20_mcast_rate(shortgi, mbpsx10_rate, |
| nss, rate, streaming_rate); |
| else if (chwidth == 1) |
| ret = wma_fill_ht40_mcast_rate(shortgi, mbpsx10_rate, |
| nss, rate, streaming_rate); |
| else |
| WMA_LOGE("%s: Error, Invalid chwidth enum %d", __func__, chwidth); |
| return (*streaming_rate != 0) ? VOS_STATUS_SUCCESS : VOS_STATUS_E_INVAL; |
| } |
| |
| static VOS_STATUS wma_fill_vht_mcast_rate(u_int32_t shortgi, |
| u_int32_t chwidth, tANI_S32 mbpsx10_rate, tANI_U8 nss, |
| WLAN_PHY_MODE chanmode, tANI_U8 *rate, tANI_S32 *streaming_rate) |
| { |
| int32_t ret = 0; |
| |
| *streaming_rate = 0; |
| if (chwidth== 0) |
| ret = wma_fill_vht20_mcast_rate(shortgi, mbpsx10_rate, nss, |
| rate, streaming_rate); |
| else if (chwidth == 1) |
| ret = wma_fill_vht40_mcast_rate(shortgi, mbpsx10_rate, nss, |
| rate, streaming_rate); |
| else if (chwidth == 2) |
| ret = wma_fill_vht80_mcast_rate(shortgi, mbpsx10_rate, nss, |
| rate, streaming_rate); |
| else |
| WMA_LOGE("%s: chwidth enum %d not supported", |
| __func__, chwidth); |
| return (*streaming_rate != 0) ? VOS_STATUS_SUCCESS : VOS_STATUS_E_INVAL; |
| } |
| |
| #define WMA_MCAST_1X1_CUT_OFF_RATE 2000 |
| /* |
| * FUNCTION: wma_encode_mc_rate |
| * |
| */ |
| static VOS_STATUS wma_encode_mc_rate(u_int32_t shortgi, u_int32_t chwidth, |
| WLAN_PHY_MODE chanmode, A_UINT32 mhz, tANI_S32 mbpsx10_rate, |
| tANI_U8 nss, tANI_U8 *rate) |
| { |
| int32_t ret = 0; |
| |
| /* nss input value: 0 - 1x1; 1 - 2x2; 2 - 3x3 |
| * the phymode selection is based on following assumption: |
| * (1) if the app specifically requested 1x1 or 2x2 we hornor it |
| * (2) if mbpsx10_rate <= 540: always use BG |
| * (3) 540 < mbpsx10_rate <= 2000: use 1x1 HT/VHT |
| * (4) 2000 < mbpsx10_rate: use 2x2 HT/VHT |
| */ |
| WMA_LOGE("%s: Input: nss = %d, chanmode = %d, " |
| "mbpsx10 = 0x%x, chwidth = %d, shortgi = %d", |
| __func__, nss, chanmode, mbpsx10_rate, chwidth, shortgi); |
| if ((mbpsx10_rate & 0x40000000) && nss > 0) { |
| /* bit 30 indicates user inputed nss, |
| * bit 28 and 29 used to encode nss */ |
| tANI_U8 user_nss = (mbpsx10_rate & 0x30000000) >> 28; |
| |
| nss = (user_nss < nss) ? user_nss : nss; |
| /* zero out bits 19 - 21 to recover the actual rate */ |
| mbpsx10_rate &= ~0x70000000; |
| } else if (mbpsx10_rate <= WMA_MCAST_1X1_CUT_OFF_RATE) { |
| /* if the input rate is less or equal to the |
| * 1x1 cutoff rate we use 1x1 only */ |
| nss = 0; |
| } |
| /* encode NSS bits (bit 4, bit 5) */ |
| *rate = (nss & 0x3) << 4; |
| /* if mcast input rate exceeds the ofdm/cck max rate 54mpbs |
| * we try to choose best ht/vht mcs rate */ |
| if (540 < mbpsx10_rate) { |
| /* cannot use ofdm/cck, choose closest ht/vht mcs rate */ |
| tANI_U8 rate_ht = *rate; |
| tANI_U8 rate_vht = *rate; |
| tANI_S32 stream_rate_ht = 0; |
| tANI_S32 stream_rate_vht = 0; |
| tANI_S32 stream_rate = 0; |
| |
| ret = wma_fill_ht_mcast_rate(shortgi, chwidth, mbpsx10_rate, |
| nss, chanmode, &rate_ht, &stream_rate_ht); |
| if (ret != VOS_STATUS_SUCCESS) { |
| stream_rate_ht = 0; |
| } |
| if (mhz < WMA_2_4_GHZ_MAX_FREQ) { |
| /* not in 5 GHZ frequency */ |
| *rate = rate_ht; |
| stream_rate = stream_rate_ht; |
| goto ht_vht_done; |
| } |
| /* capable doing 11AC mcast so that search vht tables */ |
| ret = wma_fill_vht_mcast_rate(shortgi, chwidth, mbpsx10_rate, |
| nss, chanmode, &rate_vht, &stream_rate_vht); |
| if (ret != VOS_STATUS_SUCCESS) { |
| if (stream_rate_ht != 0) |
| ret = VOS_STATUS_SUCCESS; |
| *rate = rate_ht; |
| stream_rate = stream_rate_ht; |
| goto ht_vht_done; |
| } |
| if (stream_rate_ht == 0) { |
| /* only vht rate available */ |
| *rate = rate_vht; |
| stream_rate = stream_rate_vht; |
| } else { |
| /* set ht as default first */ |
| *rate = rate_ht; |
| stream_rate = stream_rate_ht; |
| if (stream_rate < mbpsx10_rate) { |
| if (mbpsx10_rate <= stream_rate_vht || |
| stream_rate < stream_rate_vht) { |
| *rate = rate_vht; |
| stream_rate = stream_rate_vht; |
| } |
| } else { |
| if (stream_rate_vht >= mbpsx10_rate && |
| stream_rate_vht < stream_rate) { |
| *rate = rate_vht; |
| stream_rate = stream_rate_vht; |
| } |
| } |
| } |
| ht_vht_done: |
| WMA_LOGE("%s: NSS = %d, ucast_chanmode = %d, " |
| "freq = %d, input_rate = %d, chwidth = %d " |
| "rate = 0x%x, streaming_rate = %d", |
| __func__, nss, chanmode, mhz, |
| mbpsx10_rate, chwidth, *rate, stream_rate); |
| } else { |
| if (mbpsx10_rate > 0) |
| ret = wma_fill_ofdm_cck_mcast_rate(mbpsx10_rate, |
| nss, rate); |
| else |
| *rate = 0xFF; |
| WMA_LOGE("%s: NSS = %d, ucast_chanmode = %d, " |
| "input_rate = %d, rate = 0x%x", |
| __func__, nss, chanmode, mbpsx10_rate, *rate); |
| } |
| return ret; |
| } |
| /* |
| * FUNCTION: wma_process_rate_update_indate |
| * |
| */ |
| VOS_STATUS wma_process_rate_update_indicate(tp_wma_handle wma, |
| tSirRateUpdateInd *pRateUpdateParams) |
| { |
| int32_t ret = 0; |
| u_int8_t vdev_id = 0; |
| void *pdev; |
| tANI_S32 mbpsx10_rate = -1; |
| tANI_U32 paramId; |
| tANI_U8 rate = 0; |
| u_int32_t short_gi; |
| struct wma_txrx_node *intr = wma->interfaces; |
| |
| /* Get the vdev id */ |
| pdev = wma_find_vdev_by_addr(wma, pRateUpdateParams->bssid, &vdev_id); |
| if (!pdev) { |
| WMA_LOGE("vdev handle is invalid for %pM", pRateUpdateParams->bssid); |
| vos_mem_free(pRateUpdateParams); |
| return VOS_STATUS_E_INVAL; |
| } |
| short_gi = intr[vdev_id].config.shortgi; |
| if (short_gi == 0) |
| short_gi = (intr[vdev_id].rate_flags & eHAL_TX_RATE_SGI) ? TRUE : FALSE; |
| /* first check if reliable TX mcast rate is used. If not check the bcast. |
| * Then is mcast. Mcast rate is saved in mcastDataRate24GHz */ |
| if (pRateUpdateParams->reliableMcastDataRateTxFlag > 0) { |
| mbpsx10_rate = pRateUpdateParams->reliableMcastDataRate; |
| paramId = WMI_VDEV_PARAM_MCAST_DATA_RATE; |
| if (pRateUpdateParams->reliableMcastDataRateTxFlag & eHAL_TX_RATE_SGI) |
| short_gi = 1; /* upper layer specified short GI */ |
| } else if (pRateUpdateParams->bcastDataRate > -1) { |
| mbpsx10_rate = pRateUpdateParams->bcastDataRate; |
| paramId = WMI_VDEV_PARAM_BCAST_DATA_RATE; |
| } else { |
| mbpsx10_rate = pRateUpdateParams->mcastDataRate24GHz; |
| paramId = WMI_VDEV_PARAM_MCAST_DATA_RATE; |
| if (pRateUpdateParams->mcastDataRate24GHzTxFlag & eHAL_TX_RATE_SGI) |
| short_gi = 1; /* upper layer specified short GI */ |
| } |
| WMA_LOGE("%s: dev_id = %d, dev_type = %d, dev_mode = %d, " |
| "mac = %pM, config.shortgi = %d, rate_flags = 0x%x", |
| __func__, vdev_id, intr[vdev_id].type, |
| pRateUpdateParams->dev_mode, pRateUpdateParams->bssid, |
| intr[vdev_id].config.shortgi, intr[vdev_id].rate_flags); |
| ret = wma_encode_mc_rate(short_gi, intr[vdev_id].config.chwidth, |
| intr[vdev_id].chanmode, intr[vdev_id].mhz, |
| mbpsx10_rate, pRateUpdateParams->nss, &rate); |
| if (ret != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s: Error, Invalid input rate value", __func__); |
| vos_mem_free(pRateUpdateParams); |
| return ret; |
| } |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_SGI, short_gi); |
| if (ret) { |
| WMA_LOGE("%s: Failed to Set WMI_VDEV_PARAM_SGI (%d), ret = %d", |
| __func__, short_gi, ret); |
| vos_mem_free(pRateUpdateParams); |
| return VOS_STATUS_E_FAILURE; |
| } |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, |
| vdev_id, paramId, rate); |
| vos_mem_free(pRateUpdateParams); |
| if (ret) { |
| WMA_LOGE("%s: Failed to Set rate, ret = %d", __func__, ret); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| #ifdef WLAN_FEATURE_11AC |
| static void wma_process_update_membership(tp_wma_handle wma_handle, |
| tUpdateMembership *membership) |
| { |
| WMA_LOGD("%s: membership = %x ", __func__, |
| membership->membership); |
| |
| wma_set_peer_param(wma_handle, membership->peer_mac, |
| WMI_PEER_MEMBERSHIP, membership->membership, |
| membership->smesessionId); |
| } |
| |
| static void wma_process_update_userpos(tp_wma_handle wma_handle, |
| tUpdateUserPos *userpos) |
| { |
| WMA_LOGD("%s: userPos = %x ", __func__, userpos->userPos); |
| |
| wma_set_peer_param(wma_handle, userpos->peer_mac, |
| WMI_PEER_USERPOS, userpos->userPos, |
| userpos->smesessionId); |
| |
| /* Now that membership/userpos is updated in fw, |
| * enable GID PPS. |
| */ |
| wma_set_ppsconfig(userpos->smesessionId, |
| WMA_VHT_PPS_GID_MATCH, 1); |
| |
| } |
| #endif |
| |
| /* |
| * FUNCTION: wma_find_ibss_vdev |
| * This function finds vdev_id based on input type |
| */ |
| int32_t wma_find_vdev_by_type(tp_wma_handle wma, int32_t type) |
| { |
| int32_t vdev_id = 0; |
| struct wma_txrx_node *intf = wma->interfaces; |
| |
| for(vdev_id = 0; vdev_id < wma->max_bssid ; vdev_id++) |
| { |
| if (NULL != intf) |
| { |
| if (intf[vdev_id].type == type) |
| return vdev_id; |
| } |
| } |
| |
| return -1; |
| } |
| |
| /* |
| * FUNCTION: wma_process_cesium_enable_ind |
| * This function enables cesium functionality in target |
| */ |
| VOS_STATUS wma_process_cesium_enable_ind(tp_wma_handle wma) |
| { |
| int32_t ret; |
| int32_t vdev_id; |
| |
| vdev_id = wma_find_vdev_by_type(wma, WMI_VDEV_TYPE_IBSS); |
| if (vdev_id < 0) |
| { |
| WMA_LOGE("%s: IBSS vdev does not exist could not enable cesium", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| /* Send enable cesium command to target */ |
| WMA_LOGE("Enable cesium in target for vdevId %d ", vdev_id); |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_ENABLE_RMC, 1); |
| if (ret) |
| { |
| WMA_LOGE("Enable cesium failed for vdevId %d", vdev_id); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* |
| * FUNCTION: wma_process_get_peer_info_req |
| * This function sends get peer info cmd to target |
| */ |
| VOS_STATUS wma_process_get_peer_info_req |
| ( |
| tp_wma_handle wma, |
| tSirIbssGetPeerInfoReqParams *pReq |
| ) |
| { |
| int32_t ret; |
| u_int8_t *p; |
| u_int16_t len; |
| wmi_buf_t buf; |
| int32_t vdev_id; |
| ol_txrx_pdev_handle pdev; |
| struct ol_txrx_peer_t *peer; |
| u_int8_t peer_mac[IEEE80211_ADDR_LEN]; |
| wmi_peer_info_req_cmd_fixed_param *p_get_peer_info_cmd; |
| u_int8_t bcast_mac[IEEE80211_ADDR_LEN] = |
| {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; |
| |
| vdev_id = wma_find_vdev_by_type(wma, WMI_VDEV_TYPE_IBSS); |
| if (vdev_id < 0) |
| { |
| WMA_LOGE("%s: IBSS vdev does not exist could not get peer info", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| |
| if (NULL == pdev) { |
| WMA_LOGE("%s: Failed to get pdev context", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| if (0xFF == pReq->staIdx) |
| { |
| /*get info for all peers*/ |
| vos_mem_copy(peer_mac, bcast_mac, IEEE80211_ADDR_LEN); |
| } |
| else |
| { |
| /*get info for a single peer*/ |
| peer = ol_txrx_peer_find_by_local_id(pdev, pReq->staIdx); |
| if (!peer) |
| { |
| WMA_LOGE("%s: Failed to get peer handle using peer id %d", |
| __func__, pReq->staIdx); |
| return VOS_STATUS_E_FAILURE; |
| } |
| WMA_LOGE("%s: staIdx %d peer mac: 0x%2x:0x%2x:0x%2x:0x%2x:0x%2x:0x%2x", |
| __func__, pReq->staIdx, peer->mac_addr.raw[0], peer->mac_addr.raw[1], |
| peer->mac_addr.raw[2], peer->mac_addr.raw[3], peer->mac_addr.raw[4], |
| peer->mac_addr.raw[5]); |
| vos_mem_copy(peer_mac, peer->mac_addr.raw, IEEE80211_ADDR_LEN); |
| } |
| |
| len = sizeof(wmi_peer_info_req_cmd_fixed_param); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) |
| { |
| WMA_LOGE("%s %d: No WMI resource!", __func__, __LINE__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| p = (u_int8_t *) wmi_buf_data(buf); |
| vos_mem_zero(p, len); |
| p_get_peer_info_cmd = (wmi_peer_info_req_cmd_fixed_param *)p; |
| |
| WMITLV_SET_HDR(&p_get_peer_info_cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_peer_info_req_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_peer_info_req_cmd_fixed_param)); |
| |
| p_get_peer_info_cmd->vdev_id = vdev_id; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(peer_mac,&p_get_peer_info_cmd->peer_mac_address); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_PEER_INFO_REQ_CMDID); |
| |
| WMA_LOGE("IBSS get peer info cmd sent len: %d, vdev %d" |
| " command id: %d, status: %d", len, p_get_peer_info_cmd->vdev_id, |
| WMI_PEER_INFO_REQ_CMDID, ret); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* |
| * FUNCTION: wma_process_tx_fail_monitor_ind |
| * This function sends tx fail monitor cmd to target |
| */ |
| VOS_STATUS wma_process_tx_fail_monitor_ind |
| ( |
| tp_wma_handle wma, |
| tAniTXFailMonitorInd *pReq) |
| { |
| int32_t ret; |
| int32_t vdev_id; |
| |
| vdev_id = wma_find_vdev_by_type(wma, WMI_VDEV_TYPE_IBSS); |
| if (vdev_id < 0) |
| { |
| WMA_LOGE("%s: IBSS vdev does not exist could not send fast tx fail" |
| " monitor indication message to target", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| /* Send enable cesium command to target */ |
| WMA_LOGE("send fast tx fail monitor ind cmd target for vdevId %d val %d", |
| vdev_id, pReq->tx_fail_count); |
| |
| if (0 == pReq->tx_fail_count) |
| { |
| wma->hddTxFailCb = NULL; |
| } |
| else |
| { |
| wma->hddTxFailCb = pReq->txFailIndCallback; |
| } |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_SET_IBSS_TX_FAIL_CNT_THR, pReq->tx_fail_count); |
| if (ret) |
| { |
| WMA_LOGE("tx fail monitor failed for vdevId %d", vdev_id); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* |
| * FUNCTION: wma_process_rmc_enable_ind |
| * This function enables RMC functionality in target |
| */ |
| VOS_STATUS wma_process_rmc_enable_ind(tp_wma_handle wma) |
| { |
| int ret; |
| u_int8_t *p; |
| u_int16_t len; |
| wmi_buf_t buf; |
| int32_t vdev_id; |
| wmi_rmc_set_mode_cmd_fixed_param *p_rmc_enable_cmd; |
| |
| vdev_id = wma_find_vdev_by_type(wma, WMI_VDEV_TYPE_IBSS); |
| if (vdev_id < 0) |
| { |
| WMA_LOGE("%s: IBSS vdev does not exist could not enable RMC", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| len = sizeof(wmi_rmc_set_mode_cmd_fixed_param); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) |
| { |
| WMA_LOGE("%s %d: No WMI resource!", __func__, __LINE__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| p = (u_int8_t *) wmi_buf_data(buf); |
| vos_mem_zero(p, len); |
| p_rmc_enable_cmd = (wmi_rmc_set_mode_cmd_fixed_param *)p; |
| |
| WMITLV_SET_HDR(&p_rmc_enable_cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_rmc_set_mode_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_rmc_set_mode_cmd_fixed_param)); |
| |
| p_rmc_enable_cmd->vdev_id = vdev_id; |
| p_rmc_enable_cmd->enable_rmc = WMI_RMC_MODE_ENABLED; |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_RMC_SET_MODE_CMDID); |
| |
| WMA_LOGE("Enable RMC cmd sent len: %d, vdev %d" " command id: %d," |
| " status: %d", len, p_rmc_enable_cmd->vdev_id, WMI_RMC_SET_MODE_CMDID, |
| ret); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| |
| |
| /* |
| * FUNCTION: wma_process_rmc_disable_ind |
| * This function disables cesium functionality in target |
| */ |
| VOS_STATUS wma_process_rmc_disable_ind(tp_wma_handle wma) |
| { |
| int ret; |
| u_int8_t *p; |
| u_int16_t len; |
| wmi_buf_t buf; |
| int32_t vdev_id; |
| wmi_rmc_set_mode_cmd_fixed_param *p_rmc_disable_cmd; |
| |
| vdev_id = wma_find_vdev_by_type(wma, WMI_VDEV_TYPE_IBSS); |
| if (vdev_id < 0) |
| { |
| WMA_LOGE("%s: IBSS vdev does not exist could not disable RMC", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| len = sizeof(wmi_rmc_set_mode_cmd_fixed_param); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) |
| { |
| WMA_LOGE("%s %d: No WMI resource!", __func__, __LINE__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| p = (u_int8_t *) wmi_buf_data(buf); |
| vos_mem_zero(p, len); |
| p_rmc_disable_cmd = (wmi_rmc_set_mode_cmd_fixed_param *)p; |
| |
| WMITLV_SET_HDR(&p_rmc_disable_cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_rmc_set_mode_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_rmc_set_mode_cmd_fixed_param)); |
| |
| p_rmc_disable_cmd->vdev_id = vdev_id; |
| p_rmc_disable_cmd->enable_rmc = WMI_RMC_MODE_DISABLED; |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_RMC_SET_MODE_CMDID); |
| |
| WMA_LOGE("Disable RMC cmd sent len: %d, vdev %d" " command id: %d," |
| " status: %d", len, p_rmc_disable_cmd->vdev_id, WMI_RMC_SET_MODE_CMDID, |
| ret); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| |
| |
| /* |
| * FUNCTION: wma_process_rmc_action_period_ind |
| * This function sends RMC action period to target |
| */ |
| VOS_STATUS wma_process_rmc_action_period_ind(tp_wma_handle wma) |
| { |
| int ret; |
| u_int8_t *p; |
| u_int16_t len; |
| u_int32_t val; |
| wmi_buf_t buf; |
| int32_t vdev_id; |
| wmi_rmc_set_action_period_cmd_fixed_param *p_rmc_cmd; |
| struct sAniSirGlobal *mac = |
| (struct sAniSirGlobal*)vos_get_context(VOS_MODULE_ID_PE, |
| wma->vos_context); |
| |
| if (NULL == mac) { |
| WMA_LOGE("%s: MAC mac does not exist", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| vdev_id = wma_find_vdev_by_type(wma, WMI_VDEV_TYPE_IBSS); |
| if (vdev_id < 0) |
| { |
| WMA_LOGE("%s: IBSS vdev does not exist could not send" |
| " RMC action period to target", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| len = sizeof(wmi_rmc_set_action_period_cmd_fixed_param); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) |
| { |
| WMA_LOGE("%s %d: No WMI resource!", __func__, __LINE__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| p = (u_int8_t *) wmi_buf_data(buf); |
| vos_mem_zero(p, len); |
| p_rmc_cmd = (wmi_rmc_set_action_period_cmd_fixed_param *)p; |
| |
| WMITLV_SET_HDR(&p_rmc_cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_rmc_set_action_period_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_rmc_set_action_period_cmd_fixed_param)); |
| |
| if (wlan_cfgGetInt(mac, WNI_CFG_RMC_ACTION_PERIOD_FREQUENCY, &val) |
| != eSIR_SUCCESS) |
| { |
| WMA_LOGE("Failed to get value for RMC action period using default"); |
| val = WNI_CFG_RMC_ACTION_PERIOD_FREQUENCY_STADEF; |
| } |
| |
| p_rmc_cmd->vdev_id = vdev_id; |
| p_rmc_cmd->periodicity_msec = val; |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_RMC_SET_ACTION_PERIOD_CMDID); |
| |
| WMA_LOGE("RMC action period %d cmd sent len: %d, vdev %d" |
| " command id: %d, status: %d", p_rmc_cmd->periodicity_msec, len, |
| p_rmc_cmd->vdev_id, WMI_RMC_SET_ACTION_PERIOD_CMDID, ret); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* function : wma_process_init_thermal_info |
| * Description : This function initializes the thermal management table in WMA, |
| sends down the initial temperature thresholds to the firmware and |
| configures the throttle period in the tx rx module |
| * Args : |
| wma : Pointer to WMA handle |
| * pThermalParams : Pointer to thermal mitigation parameters |
| * Returns : |
| * VOS_STATUS_SUCCESS for success otherwise failure |
| */ |
| VOS_STATUS wma_process_init_thermal_info(tp_wma_handle wma, |
| t_thermal_mgmt *pThermalParams) |
| { |
| t_thermal_cmd_params thermal_params; |
| ol_txrx_pdev_handle curr_pdev; |
| |
| if (NULL == wma || NULL == pThermalParams) { |
| WMA_LOGE("TM Invalid input"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| curr_pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| if (NULL == curr_pdev) { |
| WMA_LOGE("%s: Failed to get pdev", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("TM enable %d period %d", pThermalParams->thermalMgmtEnabled, |
| pThermalParams->throttlePeriod); |
| WMA_LOGD("Throttle Duty Cycle Level in percentage:\n" |
| "0 %d\n" |
| "1 %d\n" |
| "2 %d\n" |
| "3 %d", |
| pThermalParams->throttle_duty_cycle_tbl[0], |
| pThermalParams->throttle_duty_cycle_tbl[1], |
| pThermalParams->throttle_duty_cycle_tbl[2], |
| pThermalParams->throttle_duty_cycle_tbl[3]); |
| |
| wma->thermal_mgmt_info.thermalMgmtEnabled = |
| pThermalParams->thermalMgmtEnabled; |
| wma->thermal_mgmt_info.thermalLevels[0].minTempThreshold = |
| pThermalParams->thermalLevels[0].minTempThreshold; |
| wma->thermal_mgmt_info.thermalLevels[0].maxTempThreshold = |
| pThermalParams->thermalLevels[0].maxTempThreshold; |
| wma->thermal_mgmt_info.thermalLevels[1].minTempThreshold = |
| pThermalParams->thermalLevels[1].minTempThreshold; |
| wma->thermal_mgmt_info.thermalLevels[1].maxTempThreshold = |
| pThermalParams->thermalLevels[1].maxTempThreshold; |
| wma->thermal_mgmt_info.thermalLevels[2].minTempThreshold = |
| pThermalParams->thermalLevels[2].minTempThreshold; |
| wma->thermal_mgmt_info.thermalLevels[2].maxTempThreshold = |
| pThermalParams->thermalLevels[2].maxTempThreshold; |
| wma->thermal_mgmt_info.thermalLevels[3].minTempThreshold = |
| pThermalParams->thermalLevels[3].minTempThreshold; |
| wma->thermal_mgmt_info.thermalLevels[3].maxTempThreshold = |
| pThermalParams->thermalLevels[3].maxTempThreshold; |
| wma->thermal_mgmt_info.thermalCurrLevel = WLAN_WMA_THERMAL_LEVEL_0; |
| |
| WMA_LOGD("TM level min max:\n" |
| "0 %d %d\n" |
| "1 %d %d\n" |
| "2 %d %d\n" |
| "3 %d %d", |
| wma->thermal_mgmt_info.thermalLevels[0].minTempThreshold, |
| wma->thermal_mgmt_info.thermalLevels[0].maxTempThreshold, |
| wma->thermal_mgmt_info.thermalLevels[1].minTempThreshold, |
| wma->thermal_mgmt_info.thermalLevels[1].maxTempThreshold, |
| wma->thermal_mgmt_info.thermalLevels[2].minTempThreshold, |
| wma->thermal_mgmt_info.thermalLevels[2].maxTempThreshold, |
| wma->thermal_mgmt_info.thermalLevels[3].minTempThreshold, |
| wma->thermal_mgmt_info.thermalLevels[3].maxTempThreshold); |
| |
| if (wma->thermal_mgmt_info.thermalMgmtEnabled) |
| { |
| ol_tx_throttle_init_period(curr_pdev, |
| pThermalParams->throttlePeriod, |
| &pThermalParams->throttle_duty_cycle_tbl[0]); |
| |
| /* Get the temperature thresholds to set in firmware */ |
| thermal_params.minTemp = wma->thermal_mgmt_info. |
| thermalLevels[WLAN_WMA_THERMAL_LEVEL_0].minTempThreshold; |
| thermal_params.maxTemp = wma->thermal_mgmt_info. |
| thermalLevels[WLAN_WMA_THERMAL_LEVEL_0].maxTempThreshold; |
| thermal_params.thermalEnable = |
| wma->thermal_mgmt_info.thermalMgmtEnabled; |
| |
| WMA_LOGE("TM sending the following to firmware: min %d max %d enable %d", |
| thermal_params.minTemp, thermal_params.maxTemp, |
| thermal_params.thermalEnable); |
| |
| if(VOS_STATUS_SUCCESS != wma_set_thermal_mgmt(wma, thermal_params)) |
| { |
| WMA_LOGE("Could not send thermal mgmt command to the firmware!"); |
| } |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| |
| static void wma_set_thermal_level_ind(u_int8_t level) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| vos_msg_t sme_msg = {0}; |
| |
| WMA_LOGI(FL("Thermal level: %d"), level); |
| |
| sme_msg.type = eWNI_SME_SET_THERMAL_LEVEL_IND; |
| sme_msg.bodyptr = NULL; |
| sme_msg.bodyval = level; |
| |
| vos_status = vos_mq_post_message(VOS_MODULE_ID_SME, &sme_msg); |
| if (!VOS_IS_STATUS_SUCCESS(vos_status)) |
| WMA_LOGE(FL("Fail to post set temperaturml level ind msg")); |
| } |
| |
| /** |
| * wma_process_set_thermal_level() - Sets new thermal throttle level |
| * wma: Pointer to wma handle |
| * thermal_level: Thermal level to set |
| * |
| * This function sets new thermal throttle level in the txrx module and sends |
| * down the corresponding temperature thresholds to the firmware. |
| * |
| * Return: VOS_STATUS_SUCCESS for success otherwise failure. |
| * |
| */ |
| VOS_STATUS wma_process_set_thermal_level(tp_wma_handle wma, |
| uint8_t thermal_level) |
| { |
| ol_txrx_pdev_handle curr_pdev; |
| |
| |
| if (NULL == wma) { |
| WMA_LOGE("TM Invalid input"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| |
| curr_pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| if (NULL == curr_pdev) { |
| WMA_LOGE("%s: Failed to get pdev", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGE("TM set level %d", thermal_level); |
| |
| /* Check if thermal mitigation is enabled */ |
| if (!wma->thermal_mgmt_info.thermalMgmtEnabled) { |
| WMA_LOGE("Thermal mgmt is not enabled, ignoring set level cmd"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| if (thermal_level >= WLAN_WMA_MAX_THERMAL_LEVELS) { |
| WMA_LOGE("Invalid thermal level set %d", thermal_level); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| if (thermal_level == wma->thermal_mgmt_info.thermalCurrLevel) { |
| WMA_LOGD("Current level %d is same as the set level, ignoring", |
| wma->thermal_mgmt_info.thermalCurrLevel); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| wma->thermal_mgmt_info.thermalCurrLevel = thermal_level; |
| |
| ol_tx_throttle_set_level(curr_pdev, thermal_level); |
| |
| /* Send SME SET_THERMAL_LEVEL_IND message */ |
| wma_set_thermal_level_ind(thermal_level); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* function : wma_ProcessTxPowerLimits |
| * Description : This function sends the power limits for 2g/5g to firmware |
| * Args : |
| handle : Pointer to WMA handle |
| * ptxlim : Pointer to power limit values |
| * Returns : VOS_STATUS based on values sent to firmware |
| * |
| */ |
| VOS_STATUS wma_ProcessTxPowerLimits(WMA_HANDLE handle, |
| tSirTxPowerLimit *ptxlim) |
| { |
| tp_wma_handle wma = (tp_wma_handle)handle; |
| int32_t ret = 0; |
| u_int32_t txpower_params2g = 0; |
| u_int32_t txpower_params5g = 0; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue tx power limit", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| /* Set value and reason code for 2g and 5g power limit */ |
| |
| SET_PDEV_PARAM_TXPOWER_REASON(txpower_params2g, |
| WMI_PDEV_PARAM_TXPOWER_REASON_SAR); |
| SET_PDEV_PARAM_TXPOWER_VALUE(txpower_params2g, |
| ptxlim->txPower2g); |
| |
| SET_PDEV_PARAM_TXPOWER_REASON(txpower_params5g, |
| WMI_PDEV_PARAM_TXPOWER_REASON_SAR); |
| SET_PDEV_PARAM_TXPOWER_VALUE(txpower_params5g, |
| ptxlim->txPower5g); |
| |
| WMA_LOGD("%s: txpower2g: %x txpower5g: %x", |
| __func__, txpower_params2g, txpower_params5g); |
| |
| ret = wmi_unified_pdev_set_param(wma->wmi_handle, |
| WMI_PDEV_PARAM_TXPOWER_LIMIT2G, txpower_params2g); |
| if (ret) { |
| WMA_LOGE("%s: Failed to set txpower 2g (%d)", |
| __func__, ret); |
| return VOS_STATUS_E_FAILURE; |
| } |
| ret = wmi_unified_pdev_set_param(wma->wmi_handle, |
| WMI_PDEV_PARAM_TXPOWER_LIMIT5G, txpower_params5g); |
| if (ret) { |
| WMA_LOGE("%s: Failed to set txpower 5g (%d)", |
| __func__, ret); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| #if defined(CONFIG_HL_SUPPORT) && defined(QCA_BAD_PEER_TX_FLOW_CL) |
| |
| /** |
| * wma_set_peer_rate_report_condition - |
| * this function set peer rate report |
| * condition info to firmware. |
| * @handle: Handle of WMA |
| * @config: Bad peer configuration from SIR module |
| * |
| * It is a wrapper function to sent WMI_PEER_SET_RATE_REPORT_CONDITION_CMDID |
| * to the firmare\target.If the command sent to firmware failed, free the |
| * buffer that allocated. |
| * |
| * Return: VOS_STATUS based on values sent to firmware |
| */ |
| |
| VOS_STATUS wma_set_peer_rate_report_condition(WMA_HANDLE handle, |
| struct t_bad_peer_txtcl_config *config) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle)handle; |
| wmi_peer_set_rate_report_condition_fixed_param *cmd = NULL; |
| wmi_buf_t buf = NULL; |
| int status = 0; |
| u_int32_t len = 0; |
| u_int32_t i, j; |
| |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("Failed to alloc buf to peer_set_condition cmd\n"); |
| return eHAL_STATUS_FAILURE; |
| } |
| |
| cmd = (wmi_peer_set_rate_report_condition_fixed_param *) |
| wmi_buf_data (buf); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_peer_set_rate_report_condition_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_peer_set_rate_report_condition_fixed_param)); |
| |
| cmd->enable_rate_report = config->enable; |
| cmd->report_backoff_time = config->tgt_backoff; |
| cmd->report_timer_period = config->tgt_report_prd; |
| for (i = 0; i < PEER_RATE_REPORT_COND_MAX_NUM; i++) { |
| cmd->cond_per_phy[i].val_cond_flags = |
| config->threshold[i].cond; |
| cmd->cond_per_phy[i].rate_delta.min_delta = |
| config->threshold[i].delta; |
| cmd->cond_per_phy[i].rate_delta.percentage = |
| config->threshold[i].percentage; |
| for (j = 0; j < MAX_NUM_OF_RATE_THRESH; j++) { |
| cmd->cond_per_phy[i].rate_threshold[j] = |
| config->threshold[i].thresh[j]; |
| } |
| } |
| WMA_LOGE("%s enable %d backoff_time %d period %d\n", __func__, |
| cmd->enable_rate_report, |
| cmd->report_backoff_time, cmd->report_timer_period); |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_PEER_SET_RATE_REPORT_CONDITION_CMDID); |
| if (status) { |
| wmi_buf_free(buf); |
| WMA_LOGE("%s:Failed to send peer_set_report_cond command", |
| __func__); |
| return eHAL_STATUS_FAILURE; |
| } |
| return eHAL_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_process_init_bad_peer_tx_ctl_info - |
| * this function to initialize peer rate report config info. |
| * @handle: Handle of WMA |
| * @config: Bad peer configuration from SIR module |
| * |
| * This function initializes the bad peer tx control data structure in WMA, |
| * sends down the initial configuration to the firmware and configures |
| * the peer status update seeting in the tx_rx module. |
| * |
| * Return: VOS_STATUS based on procedure status |
| */ |
| |
| static VOS_STATUS wma_process_init_bad_peer_tx_ctl_info(tp_wma_handle wma, |
| struct t_bad_peer_txtcl_config *config) |
| { |
| /* Parameter sanity check */ |
| ol_txrx_pdev_handle curr_pdev; |
| |
| if (NULL == wma || NULL == config) { |
| WMA_LOGE("%s Invalid input\n", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| curr_pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| if (NULL == curr_pdev) { |
| WMA_LOGE("%s: Failed to get pdev\n", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGE("%s enable %d period %d txq limit %d\n", __func__, |
| config->enable, |
| config->period, |
| config->txq_limit); |
| |
| /* Only need to initialize the setting |
| when the feature is enabled */ |
| if (config->enable) { |
| int i = 0; |
| |
| ol_txrx_bad_peer_txctl_set_setting(curr_pdev, |
| config->enable, |
| config->period, |
| config->txq_limit); |
| |
| for (i = 0; i < WLAN_WMA_IEEE80211_MAX_LEVEL; i++) { |
| u_int32_t threshold, limit; |
| threshold = |
| config->threshold[i].thresh[0]; |
| limit = config->threshold[i].txlimit; |
| ol_txrx_bad_peer_txctl_update_threshold(curr_pdev, i, |
| threshold, limit); |
| } |
| } |
| |
| return wma_set_peer_rate_report_condition(wma, config); |
| } |
| #else |
| static inline |
| VOS_STATUS wma_process_init_bad_peer_tx_ctl_info(tp_wma_handle wma, |
| struct t_bad_peer_txtcl_config *config) |
| { |
| return eHAL_STATUS_SUCCESS; |
| } |
| #endif /* defined(CONFIG_HL_SUPPORT) && defined(QCA_BAD_PEER_TX_FLOW_CL) */ |
| |
| /* |
| * FUNCTION: wma_ProcessAddPeriodicTxPtrnInd |
| * WMI command sent to firmware to add patterns |
| * for the corresponding vdev id |
| */ |
| VOS_STATUS wma_ProcessAddPeriodicTxPtrnInd(WMA_HANDLE handle, |
| tSirAddPeriodicTxPtrn *pAddPeriodicTxPtrnParams) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param* cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len; |
| uint8_t vdev_id; |
| u_int8_t *buf_ptr; |
| u_int32_t ptrn_len, ptrn_len_aligned; |
| int j; |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue fw add pattern cmd", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| ptrn_len = pAddPeriodicTxPtrnParams->ucPtrnSize; |
| ptrn_len_aligned = roundup(ptrn_len, sizeof(uint32_t)); |
| len = sizeof(WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param) + |
| WMI_TLV_HDR_SIZE + ptrn_len_aligned; |
| |
| wmi_buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| if (!wma_find_vdev_by_addr(wma_handle, |
| pAddPeriodicTxPtrnParams->macAddress, &vdev_id)) { |
| WMA_LOGE("%s: Failed to find vdev id for %pM",__func__, |
| pAddPeriodicTxPtrnParams->macAddress); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_INVAL; |
| } |
| buf_ptr = (u_int8_t *) wmi_buf_data(wmi_buf); |
| |
| cmd = (WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param)); |
| |
| /* Pass the pattern id to delete for the corresponding vdev id */ |
| cmd->vdev_id = vdev_id; |
| cmd->pattern_id = pAddPeriodicTxPtrnParams->ucPtrnId; |
| cmd->timeout = pAddPeriodicTxPtrnParams->usPtrnIntervalMs; |
| cmd->length = pAddPeriodicTxPtrnParams->ucPtrnSize; |
| |
| /* Pattern info */ |
| buf_ptr += sizeof(WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, ptrn_len_aligned); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| vos_mem_copy(buf_ptr, pAddPeriodicTxPtrnParams->ucPattern, |
| ptrn_len); |
| for (j = 0; j < pAddPeriodicTxPtrnParams->ucPtrnSize; j++) { |
| WMA_LOGD("%s: Add Ptrn: %02x", __func__, buf_ptr[j] & 0xff); |
| } |
| WMA_LOGD("%s: Add ptrn id: %d vdev_id: %d", |
| __func__, cmd->pattern_id, cmd->vdev_id); |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, wmi_buf, len, |
| WMI_ADD_PROACTIVE_ARP_RSP_PATTERN_CMDID)) { |
| WMA_LOGE("%s: failed to add pattern set state command", __func__); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* |
| * FUNCTION: wma_ProcessDelPeriodicTxPtrnInd |
| * WMI command sent to firmware to del patterns |
| * for the corresponding vdev id |
| */ |
| VOS_STATUS wma_ProcessDelPeriodicTxPtrnInd(WMA_HANDLE handle, |
| tSirDelPeriodicTxPtrn *pDelPeriodicTxPtrnParams) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param* cmd; |
| wmi_buf_t wmi_buf; |
| uint8_t vdev_id; |
| u_int32_t len = sizeof(WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param); |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue Del Pattern cmd", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| wmi_buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| if (!wma_find_vdev_by_addr(wma_handle, |
| pDelPeriodicTxPtrnParams->macAddress, &vdev_id)) { |
| WMA_LOGE("%s: Failed to find vdev id for %pM",__func__, |
| pDelPeriodicTxPtrnParams->macAddress); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_INVAL; |
| } |
| cmd = (WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param *)wmi_buf_data(wmi_buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMD_fixed_param)); |
| |
| /* Pass the pattern id to delete for the corresponding vdev id */ |
| cmd->vdev_id = vdev_id; |
| cmd->pattern_id = pDelPeriodicTxPtrnParams->ucPtrnId; |
| WMA_LOGD("%s: Del ptrn id: %d vdev_id: %d", |
| __func__, cmd->pattern_id, cmd->vdev_id); |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, wmi_buf, len, |
| WMI_DEL_PROACTIVE_ARP_RSP_PATTERN_CMDID)) { |
| WMA_LOGE("%s: failed to send del pattern command", __func__); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static void wma_set_p2pgo_noa_Req(tp_wma_handle wma, |
| tP2pPsParams *noa) |
| { |
| wmi_p2p_set_noa_cmd_fixed_param *cmd; |
| wmi_p2p_noa_descriptor *noa_discriptor; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| u_int16_t len; |
| int32_t status; |
| u_int32_t duration; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| len = sizeof(*cmd) + WMI_TLV_HDR_SIZE + sizeof(*noa_discriptor); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate memory"); |
| goto end; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_p2p_set_noa_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_p2p_set_noa_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_p2p_set_noa_cmd_fixed_param)); |
| duration = (noa->count == 1)? noa->single_noa_duration : noa->duration; |
| cmd->vdev_id = noa->sessionId; |
| cmd->enable = (duration)? true : false; |
| cmd->num_noa = 1; |
| |
| WMITLV_SET_HDR((buf_ptr + sizeof(wmi_p2p_set_noa_cmd_fixed_param)), |
| WMITLV_TAG_ARRAY_STRUC, |
| sizeof(wmi_p2p_noa_descriptor)); |
| noa_discriptor = (wmi_p2p_noa_descriptor *) (buf_ptr + |
| sizeof(wmi_p2p_set_noa_cmd_fixed_param) + |
| WMI_TLV_HDR_SIZE); |
| WMITLV_SET_HDR(&noa_discriptor->tlv_header, |
| WMITLV_TAG_STRUC_wmi_p2p_noa_descriptor, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_p2p_noa_descriptor)); |
| noa_discriptor->type_count = noa->count; |
| noa_discriptor->duration = duration; |
| noa_discriptor->interval = noa->interval; |
| /* Set the NOA start time as 25% of the NOA Interval as an offset */ |
| noa_discriptor->start_time = noa_discriptor->interval/4; |
| |
| WMA_LOGI("SET P2P GO NOA:vdev_id:%d count:%d duration:%d interval:%d", |
| cmd->vdev_id, noa->count, noa_discriptor->duration, |
| noa->interval); |
| status = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_FWTEST_P2P_SET_NOA_PARAM_CMDID); |
| if (status != EOK) { |
| WMA_LOGE("Failed to send WMI_FWTEST_P2P_SET_NOA_PARAM_CMDID"); |
| wmi_buf_free(buf); |
| } |
| |
| end: |
| WMA_LOGD("%s: Exit", __func__); |
| } |
| |
| static void wma_set_p2pgo_oppps_req(tp_wma_handle wma, |
| tP2pPsParams *oppps) |
| { |
| wmi_p2p_set_oppps_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int32_t status; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| buf = wmi_buf_alloc(wma->wmi_handle, sizeof(*cmd)); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate memory"); |
| goto end; |
| } |
| |
| cmd = (wmi_p2p_set_oppps_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_p2p_set_oppps_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_p2p_set_oppps_cmd_fixed_param)); |
| cmd->vdev_id = oppps->sessionId; |
| if (oppps->ctWindow) |
| WMI_UNIFIED_OPPPS_ATTR_ENABLED_SET(cmd); |
| |
| WMI_UNIFIED_OPPPS_ATTR_CTWIN_SET(cmd, oppps->ctWindow); |
| WMA_LOGI("SET P2P GO OPPPS:vdev_id:%d ctwindow:%d", |
| cmd->vdev_id, oppps->ctWindow); |
| status = wmi_unified_cmd_send(wma->wmi_handle, buf, sizeof(*cmd), |
| WMI_P2P_SET_OPPPS_PARAM_CMDID); |
| if (status != EOK) { |
| WMA_LOGE("Failed to send WMI_P2P_SET_OPPPS_PARAM_CMDID"); |
| wmi_buf_free(buf); |
| } |
| |
| end: |
| WMA_LOGD("%s: Exit", __func__); |
| } |
| |
| static void wma_process_set_p2pgo_noa_Req(tp_wma_handle wma, |
| tP2pPsParams *ps_params) |
| { |
| WMA_LOGD("%s: Enter", __func__); |
| if (ps_params->opp_ps) { |
| wma_set_p2pgo_oppps_req(wma, ps_params); |
| } else { |
| wma_set_p2pgo_noa_Req(wma, ps_params); |
| } |
| |
| WMA_LOGD("%s: Exit", __func__); |
| } |
| |
| /* function : wma_process_set_mimops_req |
| * Description : Set the received MiMo PS state to firmware. |
| * Args : |
| wma_handle : Pointer to WMA handle |
| * tSetMIMOPS : Pointer to MiMo PS struct |
| * Returns : |
| */ |
| static void wma_process_set_mimops_req(tp_wma_handle wma_handle, |
| tSetMIMOPS *mimops) |
| { |
| /* Translate to what firmware understands */ |
| if ( mimops->htMIMOPSState == eSIR_HT_MIMO_PS_DYNAMIC) |
| mimops->htMIMOPSState = WMI_PEER_MIMO_PS_DYNAMIC; |
| else if ( mimops->htMIMOPSState == eSIR_HT_MIMO_PS_STATIC) |
| mimops->htMIMOPSState = WMI_PEER_MIMO_PS_STATIC; |
| else if ( mimops->htMIMOPSState == eSIR_HT_MIMO_PS_NO_LIMIT) |
| mimops->htMIMOPSState = WMI_PEER_MIMO_PS_NONE; |
| |
| WMA_LOGD("%s: htMIMOPSState = %d, sessionId = %d peerMac <%02x:%02x:%02x:%02x:%02x:%02x>", |
| __func__, |
| mimops->htMIMOPSState, mimops->sessionId, mimops->peerMac[0], |
| mimops->peerMac[1], mimops->peerMac[2], mimops->peerMac[3], |
| mimops->peerMac[4], mimops->peerMac[5]); |
| |
| wma_set_peer_param(wma_handle, mimops->peerMac, |
| WMI_PEER_MIMO_PS_STATE, mimops->htMIMOPSState, |
| mimops->sessionId); |
| } |
| |
| /* function : wma_set_vdev_intrabss_fwd |
| * Description : Set intra_fwd value to wni_in. |
| * Args : |
| * wma_handle : Pointer to WMA handle |
| * pdis_intra_fwd : Pointer to DisableIntraBssFwd struct |
| * Returns : |
| */ |
| static void wma_set_vdev_intrabss_fwd(tp_wma_handle wma_handle, |
| tpDisableIntraBssFwd pdis_intra_fwd) |
| { |
| ol_txrx_vdev_handle txrx_vdev; |
| WMA_LOGD("%s:intra_fwd:vdev(%d) intrabss_dis=%s", |
| __func__, pdis_intra_fwd->sessionId, |
| (pdis_intra_fwd->disableintrabssfwd ? "true" : "false")); |
| |
| txrx_vdev = wma_handle->interfaces[pdis_intra_fwd->sessionId].handle; |
| wdi_in_vdev_rx_fwd_disabled(txrx_vdev, pdis_intra_fwd->disableintrabssfwd); |
| } |
| |
| VOS_STATUS wma_notify_modem_power_state(void *wda_handle, |
| tSirModemPowerStateInd *pReq) |
| { |
| int32_t ret; |
| tp_wma_handle wma = (tp_wma_handle)wda_handle; |
| |
| WMA_LOGD("%s: WMA Notify Modem Power State %d", __func__, pReq->param); |
| |
| ret = wmi_unified_modem_power_state(wma->wmi_handle, pReq->param); |
| if (ret) { |
| WMA_LOGE("%s: Fail to notify Modem Power State %d", |
| __func__, pReq->param); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("Successfully notify Modem Power State %d", pReq->param); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| #ifdef WLAN_FEATURE_TSF |
| /** |
| * wma_set_tsf_gpio_pin() - send wmi cmd to configure gpio pin |
| * |
| * @handle: wma handler |
| * @pin: GPIO pin id |
| * |
| * Return: VOS_STATUS |
| */ |
| static VOS_STATUS wma_set_tsf_gpio_pin(WMA_HANDLE handle, |
| uint32_t pin) |
| { |
| tp_wma_handle wma = (tp_wma_handle)handle; |
| int32_t ret; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not set gpio", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| WMA_LOGD("%s: set tsf gpio pin: %d", |
| __func__, pin); |
| |
| ret = wmi_unified_pdev_set_param(wma->wmi_handle, |
| WMI_PDEV_PARAM_WNTS_CONFIG, pin); |
| if (ret) { |
| WMA_LOGE("%s: Failed to set tsf gpio pin (%d)", |
| __func__, ret); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| #else |
| static inline VOS_STATUS wma_set_tsf_gpio_pin(WMA_HANDLE handle, |
| uint32_t pin) |
| { |
| return VOS_STATUS_E_INVAL; |
| } |
| #endif |
| |
| #ifdef WLAN_FEATURE_STATS_EXT |
| VOS_STATUS wma_stats_ext_req(void *wda_handle, |
| tpStatsExtRequest preq) |
| { |
| int32_t ret; |
| tp_wma_handle wma = (tp_wma_handle)wda_handle; |
| wmi_req_stats_ext_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| u_int16_t len; |
| u_int8_t *buf_ptr; |
| |
| len = sizeof(*cmd) + WMI_TLV_HDR_SIZE + |
| preq->request_data_len; |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_req_stats_ext_cmd_fixed_param *)buf_ptr; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_req_stats_ext_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_req_stats_ext_cmd_fixed_param)); |
| cmd->vdev_id = preq->vdev_id; |
| cmd->data_len = preq->request_data_len; |
| |
| WMA_LOGD("%s: The data len value is %u and vdev id set is %u ", |
| __func__, preq->request_data_len, preq->vdev_id); |
| |
| buf_ptr += sizeof(wmi_req_stats_ext_cmd_fixed_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, cmd->data_len); |
| |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| vos_mem_copy(buf_ptr, preq->request_data, |
| cmd->data_len); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_REQUEST_STATS_EXT_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE("%s: Failed to send notify cmd ret = %d", __func__, ret); |
| wmi_buf_free(buf); |
| } |
| |
| return ret; |
| } |
| |
| #endif |
| |
| void wma_hidden_ssid_vdev_restart(tp_wma_handle wma_handle, |
| tHalHiddenSsidVdevRestart *pReq) |
| { |
| struct wma_txrx_node *intr = wma_handle->interfaces; |
| struct wma_target_req *msg; |
| |
| if ((pReq->sessionId != intr[pReq->sessionId].vdev_restart_params.vdev_id) || |
| !((intr[pReq->sessionId].type == WMI_VDEV_TYPE_AP) && |
| (intr[pReq->sessionId].sub_type == 0))) |
| { |
| WMA_LOGE("%s : invalid session id", __func__); |
| return; |
| } |
| |
| intr[pReq->sessionId].vdev_restart_params.ssidHidden = pReq->ssidHidden; |
| adf_os_atomic_set(&intr[pReq->sessionId].vdev_restart_params.hidden_ssid_restart_in_progress,1); |
| |
| msg = wma_fill_vdev_req(wma_handle, pReq->sessionId, |
| WDA_HIDDEN_SSID_VDEV_RESTART, |
| WMA_TARGET_REQ_TYPE_VDEV_STOP, pReq, |
| WMA_VDEV_STOP_REQUEST_TIMEOUT); |
| if (!msg) { |
| WMA_LOGE("%s: Failed to fill vdev request for vdev_id %d", |
| __func__, pReq->sessionId); |
| return; |
| } |
| |
| /* vdev stop -> vdev restart -> vdev up */ |
| WMA_LOGD("%s, vdev_id: %d, pausing tx_ll_queue for VDEV_STOP", |
| __func__, pReq->sessionId); |
| wdi_in_vdev_pause(wma_handle->interfaces[pReq->sessionId].handle, |
| OL_TXQ_PAUSE_REASON_VDEV_STOP); |
| wma_handle->interfaces[pReq->sessionId].pause_bitmap |= |
| (1 << PAUSE_TYPE_HOST); |
| if (wmi_unified_vdev_stop_send(wma_handle->wmi_handle, pReq->sessionId)) { |
| WMA_LOGE("%s: %d Failed to send vdev stop", |
| __func__, __LINE__); |
| adf_os_atomic_set(&intr[pReq->sessionId].vdev_restart_params.hidden_ssid_restart_in_progress,0); |
| wma_remove_vdev_req(wma_handle, pReq->sessionId, |
| WMA_TARGET_REQ_TYPE_VDEV_STOP); |
| return; |
| } |
| } |
| |
| #ifdef WLAN_FEATURE_LINK_LAYER_STATS |
| static VOS_STATUS wma_process_ll_stats_clearReq |
| ( |
| tp_wma_handle wma, |
| const tpSirLLStatsClearReq clearReq |
| ) |
| { |
| wmi_clear_link_stats_cmd_fixed_param *cmd; |
| int32_t len; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| int ret; |
| |
| if (!clearReq || !wma) { |
| WMA_LOGE("%s: input pointer is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| vos_mem_zero(buf_ptr, len); |
| cmd = (wmi_clear_link_stats_cmd_fixed_param *) buf_ptr; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_clear_link_stats_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_clear_link_stats_cmd_fixed_param)); |
| |
| cmd->stop_stats_collection_req = clearReq->stopReq; |
| cmd->vdev_id = clearReq->staId; |
| cmd->stats_clear_req_mask = clearReq->statsClearReqMask; |
| |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(wma->interfaces[clearReq->staId].addr, |
| &cmd->peer_macaddr); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_CLEAR_LINK_STATS_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send clear link stats req", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static VOS_STATUS wma_process_ll_stats_setReq |
| ( |
| tp_wma_handle wma, |
| const tpSirLLStatsSetReq setReq |
| ) |
| { |
| wmi_start_link_stats_cmd_fixed_param *cmd; |
| int32_t len; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| int ret; |
| |
| if (!setReq || !wma) { |
| WMA_LOGE("%s: input pointer is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| vos_mem_zero(buf_ptr, len); |
| cmd = (wmi_start_link_stats_cmd_fixed_param *) buf_ptr; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_start_link_stats_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_start_link_stats_cmd_fixed_param)); |
| |
| cmd->mpdu_size_threshold = setReq->mpduSizeThreshold; |
| cmd->aggressive_statistics_gathering = setReq->aggressiveStatisticsGathering; |
| |
| WMA_LOGD("LINK_LAYER_STATS - Start/Set Request Params"); |
| WMA_LOGD("MPDU Size Thresh : %d", cmd->mpdu_size_threshold); |
| WMA_LOGD("Aggressive Gather: %d", cmd->aggressive_statistics_gathering); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_START_LINK_STATS_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send set link stats request", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("Set Link Layer Stats request sent successfully"); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static VOS_STATUS wma_process_ll_stats_getReq |
| ( |
| tp_wma_handle wma, |
| const tpSirLLStatsGetReq getReq |
| ) |
| { |
| wmi_request_link_stats_cmd_fixed_param *cmd; |
| int32_t len; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| int ret; |
| |
| if (!getReq || !wma) { |
| WMA_LOGE("%s: input pointer is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| if (!wma->interfaces[getReq->staId].vdev_active) { |
| WMA_LOGE("%s: vdev not created yet", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| vos_mem_zero(buf_ptr, len); |
| cmd = (wmi_request_link_stats_cmd_fixed_param *) buf_ptr; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_request_link_stats_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_request_link_stats_cmd_fixed_param)); |
| |
| cmd->request_id = getReq->reqId; |
| cmd->stats_type = getReq->paramIdMask; |
| cmd->vdev_id = getReq->staId; |
| |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(wma->interfaces[getReq->staId].addr, |
| &cmd->peer_macaddr); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_REQUEST_LINK_STATS_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send get link stats request", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| #endif /* WLAN_FEATURE_LINK_LAYER_STATS */ |
| |
| #ifdef FEATURE_WLAN_EXTSCAN |
| VOS_STATUS wma_get_buf_extscan_start_cmd(tp_wma_handle wma_handle, |
| tSirWifiScanCmdReqParams *pstart, |
| wmi_buf_t *buf, |
| int *buf_len) |
| { |
| wmi_extscan_start_cmd_fixed_param *cmd; |
| wmi_extscan_bucket *dest_blist; |
| wmi_extscan_bucket_channel *dest_clist; |
| tSirWifiScanBucketSpec *src_bucket = pstart->buckets; |
| tSirWifiScanChannelSpec *src_channel = src_bucket->channels; |
| tSirWifiScanChannelSpec save_channel[WLAN_EXTSCAN_MAX_CHANNELS]; |
| |
| u_int8_t *buf_ptr; |
| int i, k, count = 0; |
| int len = sizeof(*cmd); |
| int nbuckets = pstart->numBuckets; |
| int nchannels = 0; |
| |
| /* These TLV's are are NULL by default */ |
| u_int32_t ie_len_with_pad = 0; |
| int num_ssid = 0; |
| int num_bssid = 0; |
| int ie_len = 0; |
| |
| uint32_t base_period = pstart->basePeriod; |
| |
| /* TLV placeholder for ssid_list (NULL) */ |
| len += WMI_TLV_HDR_SIZE; |
| len += num_ssid * sizeof(wmi_ssid); |
| |
| /* TLV placeholder for bssid_list (NULL) */ |
| len += WMI_TLV_HDR_SIZE; |
| len += num_bssid * sizeof(wmi_mac_addr); |
| |
| /* TLV placeholder for ie_data (NULL) */ |
| len += WMI_TLV_HDR_SIZE; |
| len += ie_len * sizeof(u_int32_t); |
| |
| /* TLV placeholder for bucket */ |
| len += WMI_TLV_HDR_SIZE; |
| len += nbuckets * sizeof(wmi_extscan_bucket); |
| |
| /* TLV channel placeholder */ |
| len += WMI_TLV_HDR_SIZE; |
| for (i = 0; i < nbuckets; i++) { |
| nchannels += src_bucket->numChannels; |
| src_bucket++; |
| } |
| len += nchannels * sizeof(wmi_extscan_bucket_channel); |
| /* Allocate the memory */ |
| *buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!*buf) { |
| WMA_LOGP("%s: failed to allocate memory" |
| " for start extscan cmd", |
| __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (u_int8_t *)wmi_buf_data(*buf); |
| cmd = (wmi_extscan_start_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_extscan_start_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_extscan_start_cmd_fixed_param)); |
| |
| cmd->request_id = pstart->requestId; |
| cmd->vdev_id = pstart->sessionId; |
| cmd->base_period = pstart->basePeriod; |
| cmd->num_buckets = nbuckets; |
| cmd->configuration_flags = 0; |
| |
| if (pstart->configuration_flags & EXTSCAN_LP_EXTENDED_BATCHING) |
| cmd->configuration_flags |= WMI_EXTSCAN_EXTENDED_BATCHING_EN; |
| WMA_LOGD("%s: Total buckets: %d total #of channels: %d cfgn_flags: 0x%x", |
| __func__, nbuckets, nchannels, cmd->configuration_flags); |
| |
| cmd->min_rest_time = WMA_EXTSCAN_REST_TIME; |
| cmd->max_rest_time = WMA_EXTSCAN_REST_TIME; |
| cmd->max_bssids_per_scan_cycle = pstart->maxAPperScan; |
| |
| /* The max dwell time is retrieved from the first channel |
| * of the first bucket and kept common for all channels. |
| */ |
| cmd->min_dwell_time_active = pstart->min_dwell_time_active; |
| cmd->max_dwell_time_active = pstart->max_dwell_time_active; |
| cmd->min_dwell_time_passive = pstart->min_dwell_time_passive; |
| cmd->max_dwell_time_passive = pstart->max_dwell_time_passive; |
| cmd->max_bssids_per_scan_cycle = pstart->maxAPperScan; |
| cmd->max_table_usage = pstart->report_threshold_percent; |
| cmd->report_threshold_num_scans = pstart->report_threshold_num_scans; |
| |
| cmd->repeat_probe_time = cmd->max_dwell_time_active / |
| WMA_SCAN_NPROBES_DEFAULT; |
| cmd->max_scan_time = WMA_EXTSCAN_MAX_SCAN_TIME; |
| cmd->probe_delay = 0; |
| cmd->probe_spacing_time = 0; |
| cmd->idle_time = 0; |
| cmd->burst_duration = WMA_EXTSCAN_BURST_DURATION; |
| cmd->scan_ctrl_flags = WMI_SCAN_ADD_BCAST_PROBE_REQ | |
| WMI_SCAN_ADD_CCK_RATES | |
| WMI_SCAN_ADD_OFDM_RATES | |
| WMI_SCAN_ADD_DS_IE_IN_PROBE_REQ; |
| cmd->scan_priority = WMI_SCAN_PRIORITY_VERY_LOW; |
| cmd->num_ssids = 0; |
| cmd->num_bssid = 0; |
| cmd->ie_len = 0; |
| cmd->n_probes = (cmd->repeat_probe_time > 0) ? |
| cmd->max_dwell_time_active / cmd->repeat_probe_time : 0; |
| |
| buf_ptr += sizeof(*cmd); |
| WMITLV_SET_HDR(buf_ptr, |
| WMITLV_TAG_ARRAY_FIXED_STRUC, |
| num_ssid * sizeof(wmi_ssid)); |
| buf_ptr += WMI_TLV_HDR_SIZE + (num_ssid * sizeof(wmi_ssid)); |
| |
| WMITLV_SET_HDR(buf_ptr, |
| WMITLV_TAG_ARRAY_FIXED_STRUC, |
| num_bssid * sizeof(wmi_mac_addr)); |
| buf_ptr += WMI_TLV_HDR_SIZE + (num_bssid * sizeof(wmi_mac_addr)); |
| |
| ie_len_with_pad = 0; |
| WMITLV_SET_HDR(buf_ptr, |
| WMITLV_TAG_ARRAY_BYTE, |
| ie_len_with_pad); |
| buf_ptr += WMI_TLV_HDR_SIZE + ie_len_with_pad; |
| |
| WMITLV_SET_HDR(buf_ptr, |
| WMITLV_TAG_ARRAY_STRUC, |
| nbuckets * sizeof(wmi_extscan_bucket)); |
| dest_blist = (wmi_extscan_bucket *) |
| (buf_ptr + WMI_TLV_HDR_SIZE); |
| src_bucket = pstart->buckets; |
| |
| /* Retrieve scanning information from each bucket and |
| * channels and send it to the target |
| */ |
| for (i = 0; i < nbuckets; i++) { |
| WMITLV_SET_HDR(dest_blist, |
| WMITLV_TAG_STRUC_wmi_extscan_bucket_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_extscan_bucket)); |
| |
| dest_blist->bucket_id = src_bucket->bucket; |
| dest_blist->base_period_multiplier = |
| src_bucket->period / base_period; |
| dest_blist->min_period = src_bucket->period; |
| dest_blist->max_period = src_bucket->max_period; |
| dest_blist->exp_backoff = src_bucket->exponent; |
| dest_blist->exp_max_step_count = src_bucket->step_count; |
| dest_blist->channel_band = src_bucket->band; |
| dest_blist->num_channels = src_bucket->numChannels; |
| dest_blist->notify_extscan_events = 0; |
| |
| if (src_bucket->reportEvents & EXTSCAN_REPORT_EVENTS_EACH_SCAN) |
| dest_blist->notify_extscan_events = |
| WMI_EXTSCAN_CYCLE_COMPLETED_EVENT | |
| WMI_EXTSCAN_CYCLE_STARTED_EVENT; |
| |
| if (src_bucket->reportEvents & |
| EXTSCAN_REPORT_EVENTS_FULL_RESULTS) { |
| dest_blist->forwarding_flags = |
| WMI_EXTSCAN_FORWARD_FRAME_TO_HOST; |
| dest_blist->notify_extscan_events |= |
| WMI_EXTSCAN_CYCLE_STARTED_EVENT | |
| WMI_EXTSCAN_CYCLE_COMPLETED_EVENT; |
| } else { |
| dest_blist->forwarding_flags = |
| WMI_EXTSCAN_NO_FORWARDING; |
| } |
| |
| if (src_bucket->reportEvents & EXTSCAN_REPORT_EVENTS_NO_BATCH) |
| dest_blist->configuration_flags = 0; |
| else |
| dest_blist->configuration_flags = |
| WMI_EXTSCAN_BUCKET_CACHE_RESULTS; |
| |
| if (src_bucket->reportEvents & |
| EXTSCAN_REPORT_EVENTS_CONTEXT_HUB) |
| dest_blist->configuration_flags |= |
| WMI_EXTSCAN_REPORT_EVENT_CONTEXT_HUB; |
| |
| WMA_LOGI("%s: ntfy_extscan_events:%u cfg_flags:%u fwd_flags:%u", |
| __func__, dest_blist->notify_extscan_events, |
| dest_blist->configuration_flags, |
| dest_blist->forwarding_flags); |
| |
| dest_blist->min_dwell_time_active = src_bucket->min_dwell_time_active; |
| dest_blist->max_dwell_time_active = src_bucket->max_dwell_time_active; |
| dest_blist->min_dwell_time_passive = src_bucket->min_dwell_time_passive; |
| dest_blist->max_dwell_time_passive = src_bucket->max_dwell_time_passive; |
| src_channel = src_bucket->channels; |
| |
| /* save the channel info to later populate |
| * the channel TLV |
| */ |
| for (k = 0; k < src_bucket->numChannels; k++) { |
| save_channel[count++].channel = |
| src_channel->channel; |
| src_channel++; |
| } |
| dest_blist++; |
| src_bucket++; |
| } |
| buf_ptr += WMI_TLV_HDR_SIZE + |
| (nbuckets * sizeof(wmi_extscan_bucket)); |
| WMITLV_SET_HDR(buf_ptr, |
| WMITLV_TAG_ARRAY_STRUC, |
| nchannels * sizeof(wmi_extscan_bucket_channel)); |
| dest_clist = (wmi_extscan_bucket_channel *) |
| (buf_ptr + WMI_TLV_HDR_SIZE); |
| |
| /* Active or passive scan is based on the bucket dwell time |
| * and channel specific active,passive scans are not |
| * supported yet |
| */ |
| for (i = 0; i < nchannels; i++) { |
| WMITLV_SET_HDR(dest_clist, |
| WMITLV_TAG_STRUC_wmi_extscan_bucket_channel_event_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_extscan_bucket_channel)); |
| dest_clist->channel = save_channel[i].channel; |
| dest_clist++; |
| } |
| buf_ptr += WMI_TLV_HDR_SIZE + |
| (nchannels * sizeof(wmi_extscan_bucket_channel)); |
| *buf_len = len; |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| VOS_STATUS wma_start_extscan(tp_wma_handle wma, |
| tSirWifiScanCmdReqParams *pstart) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_buf_t buf; |
| int len; |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed,can not issue extscan cmd", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| if (!WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_EXTSCAN)) { |
| WMA_LOGE("%s: extscan feature bit not enabled", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| /* Fill individual elements of extscan request and |
| * TLV for buckets, channel list. |
| */ |
| vos_status = wma_get_buf_extscan_start_cmd(wma, pstart, |
| &buf, &len); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s: Failed to get buffer for ext scan cmd", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| if (!buf) { |
| WMA_LOGE("%s:Failed to get buffer" |
| "for current extscan info", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| if (wmi_unified_cmd_send(wma->wmi_handle, buf, |
| len, WMI_EXTSCAN_START_CMDID)) { |
| WMA_LOGE("%s: failed to send command", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("Extscan start request sent successfully for vdev %d", |
| pstart->sessionId); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| VOS_STATUS wma_stop_extscan(tp_wma_handle wma, |
| tSirExtScanStopReqParams *pstopcmd) |
| { |
| wmi_extscan_stop_cmd_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len; |
| u_int8_t *buf_ptr; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, cannot issue cmd", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| if (!WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_EXTSCAN)) { |
| WMA_LOGE("%s: extscan not enabled", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| len = sizeof(*cmd); |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (u_int8_t *) wmi_buf_data(wmi_buf); |
| cmd = (wmi_extscan_stop_cmd_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_extscan_stop_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_extscan_stop_cmd_fixed_param)); |
| |
| cmd->request_id = pstopcmd->requestId; |
| cmd->vdev_id = pstopcmd->sessionId; |
| |
| if (wmi_unified_cmd_send(wma->wmi_handle, wmi_buf, len, |
| WMI_EXTSCAN_STOP_CMDID)) { |
| WMA_LOGE("%s: failed to command", __func__); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("Extscan stop request sent successfully for vdev %d", |
| pstopcmd->sessionId); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** wma_get_hotlist_entries_per_page() - hotlist entries per page |
| * @cmd: size of command structure. |
| * @per_entry_size: per entry size. |
| * |
| * This utility function calculates how many hotlist entries can |
| * fit in one page. |
| * |
| * Return: number of entries |
| */ |
| static inline int wma_get_hotlist_entries_per_page(wmi_unified_t wmi_handle, |
| size_t cmd_size, |
| size_t per_entry_size) |
| { |
| uint32_t avail_space = 0; |
| int num_entries = 0; |
| uint16_t max_msg_len = wmi_get_max_msg_len(wmi_handle); |
| |
| /* Calculate number of hotlist entries that can |
| * be passed in wma message request. |
| */ |
| avail_space = max_msg_len - cmd_size; |
| num_entries = avail_space / per_entry_size; |
| return num_entries; |
| } |
| |
| /** wma_get_buf_extscan_hotlist_cmd() - extscan hotlist command |
| * @wma_handle: pointer to WMA handle |
| * @photlist: pointer to input hotlist request message |
| * @buf_len: buffer len |
| * |
| * This function constructs the WMA set bssid hotlist command message |
| * and based on the maximum length of the WMA command buf, it issues |
| * multiple request. |
| * |
| * Return: VOS_STATUS enumeration. |
| */ |
| VOS_STATUS wma_get_buf_extscan_hotlist_cmd(tp_wma_handle wma_handle, |
| tSirExtScanSetBssidHotListReqParams *photlist, |
| int *buf_len) |
| { |
| wmi_extscan_configure_hotlist_monitor_cmd_fixed_param *cmd; |
| wmi_extscan_hotlist_entry *dest_hotlist; |
| tSirAPThresholdParam *src_ap = photlist->ap; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| |
| int j, index = 0; |
| int cmd_len = 0; |
| int num_entries = 0; |
| int min_entries = 0; |
| uint32_t numap = photlist->numAp; |
| int len = sizeof(*cmd); |
| |
| len += WMI_TLV_HDR_SIZE; |
| cmd_len = len; |
| |
| /* setbssid hotlist expects the bssid list |
| * to be non zero value |
| */ |
| if (!numap || (numap > WLAN_EXTSCAN_MAX_HOTLIST_APS)) { |
| WMA_LOGE("%s: Invalid number of APs: %d", __func__, numap); |
| return VOS_STATUS_E_INVAL; |
| } |
| num_entries = wma_get_hotlist_entries_per_page(wma_handle->wmi_handle, |
| cmd_len, |
| sizeof(*dest_hotlist)); |
| |
| /* Split the hot list entry pages and send multiple command |
| * requests if the buffer reaches the maximum request size |
| */ |
| while (index < numap) { |
| min_entries = VOS_MIN(num_entries, numap); |
| len += min_entries * sizeof(wmi_extscan_hotlist_entry); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (u_int8_t *)wmi_buf_data(buf); |
| cmd = (wmi_extscan_configure_hotlist_monitor_cmd_fixed_param *) |
| buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_extscan_configure_hotlist_monitor_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_extscan_configure_hotlist_monitor_cmd_fixed_param)); |
| |
| /* Multiple requests are sent until the num_entries_in_page |
| * matches the total_entries |
| */ |
| cmd->request_id = photlist->requestId; |
| cmd->vdev_id = photlist->sessionId; |
| cmd->total_entries = numap; |
| cmd->mode = 1; |
| cmd->num_entries_in_page = min_entries; |
| cmd->lost_ap_scan_count = photlist->lost_ap_sample_size; |
| cmd->first_entry_index = index; |
| |
| WMA_LOGD("%s: vdev id:%d total_entries: %d num_entries: %d lost_ap_sample_size: %d", |
| __func__, cmd->vdev_id, cmd->total_entries, |
| cmd->num_entries_in_page, |
| cmd->lost_ap_scan_count); |
| |
| buf_ptr += sizeof(*cmd); |
| WMITLV_SET_HDR(buf_ptr, |
| WMITLV_TAG_ARRAY_STRUC, |
| min_entries * sizeof(wmi_extscan_hotlist_entry)); |
| dest_hotlist = (wmi_extscan_hotlist_entry *) |
| (buf_ptr + WMI_TLV_HDR_SIZE); |
| |
| /* Populate bssid, channel info and rssi |
| * for the bssid's that are sent as hotlists. |
| */ |
| for (j = 0; j < min_entries; j++) { |
| WMITLV_SET_HDR(dest_hotlist, |
| WMITLV_TAG_STRUC_wmi_extscan_bucket_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_extscan_hotlist_entry)); |
| |
| dest_hotlist->min_rssi = src_ap->low; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(src_ap->bssid, |
| &dest_hotlist->bssid); |
| |
| WMA_LOGD("%s: min_rssi %d", __func__, |
| dest_hotlist->min_rssi); |
| WMA_LOGD("%s: bssid mac_addr31to0: 0x%x, mac_addr47to32: 0x%x", |
| __func__, dest_hotlist->bssid.mac_addr31to0, |
| dest_hotlist->bssid.mac_addr47to32); |
| dest_hotlist++; |
| src_ap++; |
| } |
| buf_ptr += WMI_TLV_HDR_SIZE + |
| (min_entries * sizeof(wmi_extscan_hotlist_entry)); |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_EXTSCAN_CONFIGURE_HOTLIST_MONITOR_CMDID)) { |
| WMA_LOGE("%s: failed to send command", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| index = index + min_entries; |
| num_entries = numap - min_entries; |
| len = cmd_len; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| VOS_STATUS wma_extscan_start_hotlist_monitor(tp_wma_handle wma, |
| tSirExtScanSetBssidHotListReqParams *photlist) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| int len; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue hotlist cmd", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| /* Fill individual elements for hotlist request and |
| * TLV for bssid entries |
| */ |
| vos_status = wma_get_buf_extscan_hotlist_cmd(wma, photlist, |
| &len); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s: Failed to get buffer for hotlist scan cmd", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| VOS_STATUS wma_extscan_stop_hotlist_monitor(tp_wma_handle wma, |
| tSirExtScanResetBssidHotlistReqParams *photlist_reset) |
| { |
| wmi_extscan_configure_hotlist_monitor_cmd_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len; |
| u_int8_t *buf_ptr; |
| int hotlist_entries = 0; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue cmd", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| if (!photlist_reset) { |
| WMA_LOGE("%s: Invalid reset hotlist buffer", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| if (!WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_EXTSCAN)) { |
| WMA_LOGE("%s: extscan not enabled", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| len = sizeof(*cmd); |
| |
| /* reset bssid hotlist with tlv set to 0 */ |
| len += WMI_TLV_HDR_SIZE; |
| len += hotlist_entries * sizeof(wmi_extscan_hotlist_entry); |
| |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(wmi_buf); |
| cmd = (wmi_extscan_configure_hotlist_monitor_cmd_fixed_param *) |
| buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_extscan_configure_hotlist_monitor_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_extscan_configure_hotlist_monitor_cmd_fixed_param)); |
| |
| cmd->request_id = photlist_reset->requestId; |
| cmd->vdev_id = photlist_reset->sessionId; |
| cmd->mode = 0; |
| |
| buf_ptr += sizeof(*cmd); |
| WMITLV_SET_HDR(buf_ptr, |
| WMITLV_TAG_ARRAY_STRUC, |
| hotlist_entries * sizeof(wmi_extscan_hotlist_entry)); |
| buf_ptr += WMI_TLV_HDR_SIZE + |
| (hotlist_entries * sizeof(wmi_extscan_hotlist_entry)); |
| |
| if (wmi_unified_cmd_send(wma->wmi_handle, wmi_buf, len, |
| WMI_EXTSCAN_CONFIGURE_HOTLIST_MONITOR_CMDID)) { |
| WMA_LOGE("%s: failed to command", __func__); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| VOS_STATUS wma_get_buf_extscan_change_monitor_cmd(tp_wma_handle wma_handle, |
| tSirExtScanSetSigChangeReqParams *psigchange, |
| wmi_buf_t *buf, int *buf_len) |
| { |
| wmi_extscan_configure_wlan_change_monitor_cmd_fixed_param *cmd; |
| wmi_extscan_wlan_change_bssid_param *dest_chglist; |
| u_int8_t *buf_ptr; |
| int j; |
| int len = sizeof(*cmd); |
| uint32_t numap = psigchange->numAp; |
| tSirAPThresholdParam *src_ap = psigchange->ap; |
| |
| if (!numap || (numap > WLAN_EXTSCAN_MAX_SIGNIFICANT_CHANGE_APS)) { |
| WMA_LOGE("%s: Invalid number of APs: %d", |
| __func__, numap); |
| return VOS_STATUS_E_INVAL; |
| } |
| len += WMI_TLV_HDR_SIZE; |
| len += numap * sizeof(wmi_extscan_wlan_change_bssid_param); |
| |
| *buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!*buf) { |
| WMA_LOGP("%s: failed to allocate memory for change monitor cmd", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| buf_ptr = (u_int8_t *) wmi_buf_data(*buf); |
| cmd = (wmi_extscan_configure_wlan_change_monitor_cmd_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_extscan_configure_wlan_change_monitor_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_extscan_configure_wlan_change_monitor_cmd_fixed_param)); |
| |
| cmd->request_id = psigchange->requestId; |
| cmd->vdev_id = psigchange->sessionId; |
| cmd->total_entries = numap; |
| cmd->mode = 1; |
| cmd->num_entries_in_page = numap; |
| cmd->lost_ap_scan_count = psigchange->lostApSampleSize; |
| cmd->max_rssi_samples = psigchange->rssiSampleSize; |
| cmd->rssi_averaging_samples = psigchange->rssiSampleSize; |
| cmd->max_out_of_range_count = psigchange->minBreaching; |
| |
| buf_ptr += sizeof(*cmd); |
| WMITLV_SET_HDR(buf_ptr, |
| WMITLV_TAG_ARRAY_STRUC, |
| numap * sizeof(wmi_extscan_wlan_change_bssid_param)); |
| dest_chglist = (wmi_extscan_wlan_change_bssid_param *) |
| (buf_ptr + WMI_TLV_HDR_SIZE); |
| |
| for (j = 0; j < numap; j++) { |
| WMITLV_SET_HDR(dest_chglist, |
| WMITLV_TAG_STRUC_wmi_extscan_bucket_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_extscan_wlan_change_bssid_param)); |
| |
| dest_chglist->lower_rssi_limit = src_ap->low; |
| dest_chglist->upper_rssi_limit = src_ap->high; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(src_ap->bssid, |
| &dest_chglist->bssid); |
| |
| WMA_LOGD("%s:min_rssi %d", __func__, |
| dest_chglist->lower_rssi_limit); |
| dest_chglist++; |
| src_ap++; |
| } |
| buf_ptr += WMI_TLV_HDR_SIZE + |
| (numap * sizeof(wmi_extscan_wlan_change_bssid_param)); |
| *buf_len = len; |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| VOS_STATUS wma_extscan_start_change_monitor(tp_wma_handle wma, |
| tSirExtScanSetSigChangeReqParams *psigchange) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_buf_t buf; |
| int len; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed,can not issue extscan cmd", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| /* Fill individual elements of change monitor and |
| * TLV info ... */ |
| |
| vos_status = wma_get_buf_extscan_change_monitor_cmd(wma, |
| psigchange, &buf, &len); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s: Failed to get buffer for change monitor cmd", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| if (!buf) { |
| WMA_LOGE("%s: Failed to get buffer", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| if (wmi_unified_cmd_send(wma->wmi_handle, buf, |
| len, WMI_EXTSCAN_CONFIGURE_WLAN_CHANGE_MONITOR_CMDID)) { |
| WMA_LOGE("%s: failed to send command", __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| VOS_STATUS wma_extscan_stop_change_monitor(tp_wma_handle wma, |
| tSirExtScanResetSignificantChangeReqParams *pResetReq) |
| { |
| wmi_extscan_configure_wlan_change_monitor_cmd_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len; |
| u_int8_t *buf_ptr; |
| int change_list = 0; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue cmd", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| if (!WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_EXTSCAN)) { |
| WMA_LOGE("%s: ext scan not enabled", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| len = sizeof(*cmd); |
| |
| /* reset significant change tlv is set to 0 */ |
| len += WMI_TLV_HDR_SIZE; |
| len += change_list * |
| sizeof(wmi_extscan_wlan_change_bssid_param); |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (u_int8_t *) wmi_buf_data(wmi_buf); |
| |
| cmd = (wmi_extscan_configure_wlan_change_monitor_cmd_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_extscan_configure_wlan_change_monitor_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_extscan_configure_wlan_change_monitor_cmd_fixed_param)); |
| |
| cmd->request_id = pResetReq->requestId; |
| cmd->vdev_id = pResetReq->sessionId; |
| cmd->mode = 0; |
| |
| buf_ptr += sizeof(*cmd); |
| WMITLV_SET_HDR(buf_ptr, |
| WMITLV_TAG_ARRAY_STRUC, |
| change_list * |
| sizeof(wmi_extscan_wlan_change_bssid_param)); |
| buf_ptr += WMI_TLV_HDR_SIZE + (change_list * |
| sizeof(wmi_extscan_wlan_change_bssid_param)); |
| |
| if (wmi_unified_cmd_send(wma->wmi_handle, wmi_buf, len, |
| WMI_EXTSCAN_CONFIGURE_WLAN_CHANGE_MONITOR_CMDID)) { |
| WMA_LOGE("%s: failed to command", __func__); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| VOS_STATUS wma_extscan_get_cached_results(tp_wma_handle wma, |
| tSirExtScanGetCachedResultsReqParams *pcached_results) |
| { |
| wmi_extscan_get_cached_results_cmd_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len; |
| u_int8_t *buf_ptr; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, cannot issue cmd", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| if (!WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_EXTSCAN)) { |
| WMA_LOGE("%s: extscan not enabled", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| len = sizeof(*cmd); |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (u_int8_t *)wmi_buf_data(wmi_buf); |
| |
| cmd = (wmi_extscan_get_cached_results_cmd_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_extscan_get_cached_results_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_extscan_get_cached_results_cmd_fixed_param)); |
| |
| cmd->request_id = pcached_results->requestId; |
| cmd->vdev_id = pcached_results->sessionId; |
| cmd->control_flags = pcached_results->flush; |
| |
| if (wmi_unified_cmd_send(wma->wmi_handle, wmi_buf, len, |
| WMI_EXTSCAN_GET_CACHED_RESULTS_CMDID)) { |
| WMA_LOGE("%s: failed to command", __func__); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| VOS_STATUS wma_extscan_get_capabilities(tp_wma_handle wma, |
| tSirGetExtScanCapabilitiesReqParams *pgetcapab) |
| { |
| wmi_extscan_get_capabilities_cmd_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len; |
| u_int8_t *buf_ptr; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue cmd", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| if (!WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_EXTSCAN)) { |
| WMA_LOGE("%s: extscan not enabled", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| len = sizeof(*cmd); |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (u_int8_t *)wmi_buf_data(wmi_buf); |
| |
| cmd = (wmi_extscan_get_capabilities_cmd_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_extscan_get_capabilities_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_extscan_get_capabilities_cmd_fixed_param)); |
| |
| cmd->request_id = pgetcapab->requestId; |
| |
| if (wmi_unified_cmd_send(wma->wmi_handle, wmi_buf, len, |
| WMI_EXTSCAN_GET_CAPABILITIES_CMDID)) { |
| WMA_LOGE("%s: failed to command", __func__); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** wma_set_epno_network_list() - set epno network list |
| * @wma: WMA handle |
| * @req: epno config params request structure |
| * |
| * This function reads the incoming epno config request structure |
| * and constructs the WMI message to the firmware. |
| * |
| * Returns: 0 on success, error number otherwise |
| */ |
| static int wma_set_epno_network_list(tp_wma_handle wma, |
| struct wifi_epno_params *req) |
| { |
| wmi_nlo_config_cmd_fixed_param *cmd; |
| nlo_configured_parameters *nlo_list; |
| enlo_candidate_score_params *cand_score_params; |
| u_int8_t i, *buf_ptr; |
| wmi_buf_t buf; |
| uint32_t len; |
| int ret; |
| |
| WMA_LOGD("wma_set_epno_network_list"); |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue cmd", __func__); |
| return -EINVAL; |
| } |
| if (!WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_EXTSCAN)) { |
| WMA_LOGE("%s: extscan not enabled", __func__); |
| return -EINVAL; |
| } |
| |
| /* Fixed Params */ |
| len = sizeof(*cmd); |
| if (req->num_networks) { |
| /* TLV place holder for array of structures |
| * then each nlo_configured_parameters(nlo_list) TLV. |
| */ |
| len += WMI_TLV_HDR_SIZE; |
| len += (sizeof(nlo_configured_parameters) |
| * VOS_MIN(req->num_networks, WMI_NLO_MAX_SSIDS)); |
| /* TLV for array of uint32 channel_list */ |
| len += WMI_TLV_HDR_SIZE; |
| /* TLV for nlo_channel_prediction_cfg */ |
| len += WMI_TLV_HDR_SIZE; |
| /* TLV for candidate score params */ |
| len += sizeof(enlo_candidate_score_params); |
| } |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return -ENOMEM; |
| } |
| |
| cmd = (wmi_nlo_config_cmd_fixed_param *) wmi_buf_data(buf); |
| |
| buf_ptr = (u_int8_t *) cmd; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_nlo_config_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_nlo_config_cmd_fixed_param)); |
| cmd->vdev_id = req->session_id; |
| |
| /* set flag to reset if num of networks are 0 */ |
| cmd->flags = (req->num_networks == 0 ? |
| WMI_NLO_CONFIG_ENLO_RESET : WMI_NLO_CONFIG_ENLO); |
| |
| buf_ptr += sizeof(wmi_nlo_config_cmd_fixed_param); |
| |
| cmd->no_of_ssids = MIN(req->num_networks, WMI_NLO_MAX_SSIDS); |
| WMA_LOGD(FL("SSID count: %d flags: %d"), |
| cmd->no_of_ssids, cmd->flags); |
| |
| /* Fill nlo_config only when num_networks are non zero */ |
| if (cmd->no_of_ssids) { |
| /* Fill networks */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| cmd->no_of_ssids * sizeof(nlo_configured_parameters)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| nlo_list = (nlo_configured_parameters *) buf_ptr; |
| for (i = 0; i < cmd->no_of_ssids; i++) { |
| WMITLV_SET_HDR(&nlo_list[i].tlv_header, |
| WMITLV_TAG_ARRAY_BYTE, |
| WMITLV_GET_STRUCT_TLVLEN |
| (nlo_configured_parameters)); |
| /* Copy ssid and it's length */ |
| nlo_list[i].ssid.valid = TRUE; |
| nlo_list[i].ssid.ssid.ssid_len = |
| req->networks[i].ssid.length; |
| vos_mem_copy(nlo_list[i].ssid.ssid.ssid, |
| req->networks[i].ssid.ssId, |
| nlo_list[i].ssid.ssid.ssid_len); |
| WMA_LOGD("index: %d ssid: %.*s len: %d", i, |
| nlo_list[i].ssid.ssid.ssid_len, |
| (char *) nlo_list[i].ssid.ssid.ssid, |
| nlo_list[i].ssid.ssid.ssid_len); |
| |
| /* Copy pno flags */ |
| nlo_list[i].bcast_nw_type.valid = TRUE; |
| nlo_list[i].bcast_nw_type.bcast_nw_type = |
| req->networks[i].flags; |
| WMA_LOGD("PNO flags (%u)", |
| nlo_list[i].bcast_nw_type.bcast_nw_type); |
| |
| /* Copy auth bit field */ |
| nlo_list[i].auth_type.valid = TRUE; |
| nlo_list[i].auth_type.auth_type = |
| req->networks[i].auth_bit_field; |
| WMA_LOGD("Auth bit field (%u)", |
| nlo_list[i].auth_type.auth_type); |
| } |
| |
| buf_ptr += cmd->no_of_ssids * sizeof(nlo_configured_parameters); |
| |
| /* Fill the channel list */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_UINT32, 0); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| /* Fill prediction_param */ |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, 0); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| /* Fill epno candidate score params */ |
| cand_score_params = (enlo_candidate_score_params *) buf_ptr; |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_STRUC_enlo_candidate_score_param, |
| WMITLV_GET_STRUCT_TLVLEN(enlo_candidate_score_params)); |
| cand_score_params->min5GHz_rssi = |
| req->min_5ghz_rssi; |
| cand_score_params->min24GHz_rssi = |
| req->min_24ghz_rssi; |
| cand_score_params->initial_score_max = |
| req->initial_score_max; |
| cand_score_params->current_connection_bonus = |
| req->current_connection_bonus; |
| cand_score_params->same_network_bonus = |
| req->same_network_bonus; |
| cand_score_params->secure_bonus = |
| req->secure_bonus; |
| cand_score_params->band5GHz_bonus = |
| req->band_5ghz_bonus; |
| buf_ptr += sizeof(enlo_candidate_score_params); |
| } |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send nlo wmi cmd", __func__); |
| wmi_buf_free(buf); |
| return -EINVAL; |
| } |
| |
| WMA_LOGD("set ePNO list request sent successfully for vdev %d", |
| req->session_id); |
| |
| return 0; |
| } |
| |
| /** |
| * wma_set_passpoint_network_list() - set passpoint network list |
| * @handle: WMA handle |
| * @req: passpoint network request structure |
| * |
| * This function reads the incoming @req and fill in the destination |
| * WMI structure and send down the passpoint configs down to the firmware |
| * |
| * Return: 0 on success; error number otherwise |
| */ |
| static int wma_set_passpoint_network_list(tp_wma_handle wma, |
| struct wifi_passpoint_req *req) |
| { |
| wmi_passpoint_config_cmd_fixed_param *cmd; |
| u_int8_t i, j, *bytes; |
| wmi_buf_t buf; |
| uint32_t len; |
| int ret; |
| |
| WMA_LOGD("wma_set_passpoint_network_list"); |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue cmd", __func__); |
| return -EINVAL; |
| } |
| if (!WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_EXTSCAN)) { |
| WMA_LOGE("%s: extscan not enabled", __func__); |
| return -EINVAL; |
| } |
| |
| len = sizeof(*cmd); |
| for (i = 0; i < req->num_networks; i++) { |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return -ENOMEM; |
| } |
| |
| cmd = (wmi_passpoint_config_cmd_fixed_param *) |
| wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_passpoint_config_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_passpoint_config_cmd_fixed_param)); |
| cmd->id = req->networks[i].id; |
| WMA_LOGD("%s: network id: %u", __func__, cmd->id); |
| vos_mem_copy(cmd->realm, req->networks[i].realm, |
| strlen(req->networks[i].realm) + 1); |
| WMA_LOGD("%s: realm: %s", __func__, cmd->realm); |
| for (j = 0; j < PASSPOINT_ROAMING_CONSORTIUM_ID_NUM; j++) { |
| bytes = (uint8_t *) &req->networks[i].roaming_consortium_ids[j]; |
| WMA_LOGD("index: %d rcids: %02x %02x %02x %02x %02x %02x %02x %02x", |
| j, bytes[0], bytes[1], bytes[2], bytes[3], |
| bytes[4], bytes[5], bytes[6], bytes[7]); |
| |
| vos_mem_copy(&cmd->roaming_consortium_ids[j], |
| &req->networks[i].roaming_consortium_ids[j], |
| PASSPOINT_ROAMING_CONSORTIUM_ID_LEN); |
| } |
| vos_mem_copy(cmd->plmn, req->networks[i].plmn, |
| PASSPOINT_PLMN_ID_LEN); |
| WMA_LOGD("%s: plmn: [%02x %02x %02x]", __func__, |
| cmd->plmn[0], cmd->plmn[1], cmd->plmn[2]); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_PASSPOINT_LIST_CONFIG_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send set passpoint network list wmi cmd", |
| __func__); |
| wmi_buf_free(buf); |
| return -EINVAL; |
| } |
| } |
| |
| WMA_LOGD("Set passpoint network list request is sent successfully for vdev %d", |
| req->session_id); |
| |
| return 0; |
| } |
| |
| /** |
| * wma_reset_passpoint_network_list() - reset passpoint network list |
| * @handle: WMA handle |
| * @req: passpoint network request structure |
| * |
| * This function sends down WMI command with network id set to wildcard id. |
| * firmware shall clear all the config entries |
| * |
| * Return: 0 on success; error number otherwise |
| */ |
| static int wma_reset_passpoint_network_list(tp_wma_handle wma, |
| struct wifi_passpoint_req *req) |
| { |
| wmi_passpoint_config_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| uint32_t len; |
| int ret; |
| |
| WMA_LOGD("wma_reset_passpoint_network_list"); |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue cmd", __func__); |
| return -EINVAL; |
| } |
| if (!WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_EXTSCAN)) { |
| WMA_LOGE("%s: extscan not enabled", __func__); |
| return -EINVAL; |
| } |
| |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return -ENOMEM; |
| } |
| |
| cmd = (wmi_passpoint_config_cmd_fixed_param *) wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_passpoint_config_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_passpoint_config_cmd_fixed_param)); |
| cmd->id = WMI_PASSPOINT_NETWORK_ID_WILDCARD; |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_PASSPOINT_LIST_CONFIG_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send reset passpoint network list wmi cmd", |
| __func__); |
| wmi_buf_free(buf); |
| return -EINVAL; |
| } |
| |
| WMA_LOGD("Reset passpoint network list request is sent successfully for vdev %d", |
| req->session_id); |
| |
| return 0; |
| } |
| |
| #endif |
| |
| VOS_STATUS wma_ipa_offload_enable_disable(tp_wma_handle wma, |
| struct sir_ipa_offload_enable_disable *ipa_offload) |
| { |
| wmi_ipa_offload_enable_disable_cmd_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len; |
| u_int8_t *buf_ptr; |
| #ifdef INTRA_BSS_FWD_OFFLOAD |
| ol_txrx_vdev_handle vdev; |
| struct txrx_pdev_cfg_t *cfg; |
| int32_t intra_bss_fwd = 0; |
| #endif |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue cmd", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| if (!WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| ((ipa_offload->offload_type == AP_RX_DATA_OFFLOAD)? |
| WMI_SERVICE_HSOFFLOAD: |
| WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT))) { |
| WMA_LOGE("%s: %s not supported", __func__, |
| ((ipa_offload->offload_type == AP_RX_DATA_OFFLOAD)? |
| "WMI_SERVICE_HSOFFLOAD": |
| "WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT")); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| if (ipa_offload->offload_type > STA_RX_DATA_OFFLOAD) { |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| if (vos_is_load_unload_in_progress(VOS_MODULE_ID_VOSS, NULL)) { |
| WMA_LOGE("%s: Driver load/unload in progress", __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| len = sizeof(*cmd); |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed (len=%d)", __func__, len); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| WMA_LOGE("%s: offload_type=%d, enable=%d", __func__, |
| ipa_offload->offload_type, ipa_offload->enable); |
| |
| buf_ptr = (u_int8_t *)wmi_buf_data(wmi_buf); |
| |
| cmd = (wmi_ipa_offload_enable_disable_cmd_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUCT_wmi_ipa_offload_enable_disable_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_ipa_offload_enable_disable_cmd_fixed_param)); |
| |
| cmd->offload_type = ipa_offload->offload_type; |
| cmd->vdev_id = ipa_offload->vdev_id; |
| cmd->enable = ipa_offload->enable; |
| |
| if (wmi_unified_cmd_send(wma->wmi_handle, wmi_buf, len, |
| WMI_IPA_OFFLOAD_ENABLE_DISABLE_CMDID)) { |
| WMA_LOGE("%s: failed to command", __func__); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| #ifdef INTRA_BSS_FWD_OFFLOAD |
| /* Check if VDEV is already deleted. If deleted, don't |
| * send INTRA BSS FWD WMI command |
| */ |
| vdev = wma_find_vdev_by_id(wma, ipa_offload->vdev_id); |
| if (!vdev) |
| return VOS_STATUS_SUCCESS; |
| |
| /* Disable Intra-BSS FWD offload when gDisableIntraBssFwd=1 in INI */ |
| cfg = (struct txrx_pdev_cfg_t *)vdev->pdev->ctrl_pdev; |
| if (!ipa_offload->enable || cfg->rx_fwd_disabled) { |
| WMA_LOGE("%s: ipa_offload->enable=%d, rx_fwd_disabled=%d", |
| __func__, ipa_offload->enable, cfg->rx_fwd_disabled); |
| intra_bss_fwd = 1; |
| } |
| |
| /* Disable/enable WMI_VDEV_PARAM_INTRA_BSS_FWD */ |
| if (wmi_unified_vdev_set_param_send(wma->wmi_handle, |
| ipa_offload->vdev_id, WMI_VDEV_PARAM_INTRA_BSS_FWD, |
| intra_bss_fwd)) { |
| WMA_LOGE("Failed to disable WMI_VDEV_PARAM_INTRA_BSS_FWD"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| #endif |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| #ifdef WLAN_FEATURE_NAN |
| /* function : wma_nan_req |
| * Descriptin : Function is used to send nan request down |
| * Args : wma_handle, request data which will be non-null |
| * Returns : SUCCESS or FAILURE |
| */ |
| static VOS_STATUS wma_nan_req(void *wda_handle, tpNanRequest nan_req) |
| { |
| int ret; |
| tp_wma_handle wma_handle = (tp_wma_handle)wda_handle; |
| wmi_nan_cmd_param *cmd; |
| wmi_buf_t buf; |
| u_int16_t len = sizeof(*cmd); |
| u_int16_t nan_data_len, nan_data_len_aligned; |
| u_int8_t *buf_ptr; |
| |
| /* |
| * <----- cmd ------------><-- WMI_TLV_HDR_SIZE --><--- data ----> |
| * +------------+----------+-----------------------+--------------+ |
| * | tlv_header | data_len | WMITLV_TAG_ARRAY_BYTE | nan_req_data | |
| * +------------+----------+-----------------------+--------------+ |
| */ |
| if (!nan_req) { |
| WMA_LOGE("%s:nan req is not valid", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| nan_data_len = nan_req->request_data_len; |
| nan_data_len_aligned = roundup(nan_req->request_data_len, |
| sizeof(u_int32_t)); |
| len += WMI_TLV_HDR_SIZE + nan_data_len_aligned; |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_nan_cmd_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_nan_cmd_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_nan_cmd_param)); |
| cmd->data_len = nan_req->request_data_len; |
| WMA_LOGD("%s: The data len value is %u", |
| __func__, nan_req->request_data_len); |
| buf_ptr += sizeof(wmi_nan_cmd_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, nan_data_len_aligned); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| vos_mem_copy(buf_ptr, nan_req->request_data, |
| cmd->data_len); |
| |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_NAN_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE("%s Failed to send set param command ret = %d", __func__, ret); |
| wmi_buf_free(buf); |
| } |
| return ret; |
| } |
| #endif |
| |
| static void wma_process_unit_test_cmd(WMA_HANDLE handle, |
| t_wma_unit_test_cmd *wma_utest) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| wmi_unit_test_cmd_fixed_param* cmd; |
| wmi_buf_t wmi_buf; |
| u_int8_t *buf_ptr; |
| int i; |
| u_int16_t len, args_tlv_len; |
| A_UINT32 *unit_test_cmd_args; |
| |
| args_tlv_len = WMI_TLV_HDR_SIZE + wma_utest->num_args * sizeof(A_UINT32); |
| len = sizeof(wmi_unit_test_cmd_fixed_param) + args_tlv_len; |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue fw unit test cmd", |
| __func__); |
| return; |
| } |
| wmi_buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmai_buf_alloc failed", __func__); |
| return; |
| } |
| |
| cmd = (wmi_unit_test_cmd_fixed_param *)wmi_buf_data(wmi_buf); |
| buf_ptr = (u_int8_t *) cmd; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_unit_test_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_unit_test_cmd_fixed_param)); |
| cmd->vdev_id = wma_utest->vdev_id; |
| cmd->module_id = wma_utest->module_id; |
| cmd->num_args = wma_utest->num_args; |
| buf_ptr += sizeof(wmi_unit_test_cmd_fixed_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_UINT32, |
| (wma_utest->num_args * sizeof(u_int32_t))); |
| unit_test_cmd_args = (A_UINT32 *)(buf_ptr + WMI_TLV_HDR_SIZE); |
| WMA_LOGI("%s: %d num of args = ", __func__, wma_utest->num_args); |
| for (i = 0; (i < wma_utest->num_args && i < WMA_MAX_NUM_ARGS); i++) { |
| unit_test_cmd_args[i] = wma_utest->args[i]; |
| WMA_LOGI("%d,", wma_utest->args[i]); |
| } |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, wmi_buf, len, |
| WMI_UNIT_TEST_CMDID)) { |
| WMA_LOGP("%s: failed to send unit test command", __func__); |
| wmi_buf_free(wmi_buf); |
| return; |
| } |
| return; |
| } |
| |
| VOS_STATUS wma_scan_probe_setoui(tp_wma_handle wma, |
| tSirScanMacOui *psetoui) |
| { |
| wmi_scan_prob_req_oui_cmd_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len; |
| u_int8_t *buf_ptr; |
| u_int32_t *oui_buf; |
| uint32_t i = 0; |
| wmi_vendor_oui *voui = NULL; |
| struct vendor_oui *pvoui = NULL; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue cmd", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| len = sizeof(*cmd) + WMI_TLV_HDR_SIZE + |
| psetoui->num_vendor_oui * sizeof(wmi_vendor_oui); |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (u_int8_t *)wmi_buf_data(wmi_buf); |
| cmd = (wmi_scan_prob_req_oui_cmd_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_scan_prob_req_oui_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_scan_prob_req_oui_cmd_fixed_param)); |
| |
| oui_buf = &cmd->prob_req_oui; |
| vos_mem_zero(oui_buf, sizeof(cmd->prob_req_oui)); |
| *oui_buf = psetoui->oui[0] << 16 | psetoui->oui[1] << 8 |
| | psetoui->oui[2]; |
| WMA_LOGD("%s: wma:oui received from hdd %08x", __func__, |
| cmd->prob_req_oui); |
| |
| cmd->vdev_id = psetoui->vdev_id; |
| cmd->flags = WMI_SCAN_PROBE_OUI_SPOOFED_MAC_IN_PROBE_REQ; |
| if (psetoui->enb_probe_req_sno_randomization) |
| cmd->flags |= WMI_SCAN_PROBE_OUI_RANDOM_SEQ_NO_IN_PROBE_REQ; |
| |
| if (psetoui->ie_whitelist) |
| cmd->flags |= |
| WMI_SCAN_PROBE_OUI_ENABLE_IE_WHITELIST_IN_PROBE_REQ; |
| |
| WMA_LOGI(FL("vdev_id = %d, flags = %x"), cmd->vdev_id, cmd->flags); |
| |
| cmd->num_vendor_oui = psetoui->num_vendor_oui; |
| |
| if (psetoui->ie_whitelist) { |
| for (i = 0; i < PROBE_REQ_BITMAP_LEN; i++) |
| cmd->ie_bitmap[i] = psetoui->probe_req_ie_bitmap[i]; |
| } |
| |
| buf_ptr += sizeof(*cmd); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC, |
| psetoui->num_vendor_oui * |
| sizeof(wmi_vendor_oui)); |
| |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| if (cmd->num_vendor_oui != 0) { |
| voui = (wmi_vendor_oui *)buf_ptr; |
| pvoui = (struct vendor_oui *)((u_int8_t *)psetoui + |
| sizeof(*psetoui)); |
| for (i = 0; i < cmd->num_vendor_oui; i++) { |
| WMITLV_SET_HDR(&voui[i].tlv_header, |
| WMITLV_TAG_STRUC_wmi_vendor_oui, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vendor_oui)); |
| voui[i].oui_type_subtype = pvoui[i].oui_type | |
| (pvoui[i].oui_subtype << 24); |
| } |
| } |
| |
| if (wmi_unified_cmd_send(wma->wmi_handle, wmi_buf, len, |
| WMI_SCAN_PROB_REQ_OUI_CMDID)) { |
| WMA_LOGE("%s: failed to send command", __func__); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| #ifdef DHCP_SERVER_OFFLOAD |
| static int wma_process_dhcpserver_offload(tp_wma_handle wma_handle, |
| tSirDhcpSrvOffloadInfo *pDhcpSrvOffloadInfo) |
| { |
| wmi_set_dhcp_server_offload_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int err; |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, sizeof(*cmd)); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate buffer to send " |
| "set_dhcp_server_offload cmd"); |
| return -ENOMEM; |
| } |
| |
| cmd = (wmi_set_dhcp_server_offload_cmd_fixed_param *)wmi_buf_data(buf); |
| vos_mem_zero(cmd, sizeof(*cmd)); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_set_dhcp_server_offload_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_set_dhcp_server_offload_cmd_fixed_param)); |
| cmd->vdev_id = pDhcpSrvOffloadInfo->vdev_id; |
| cmd->enable = pDhcpSrvOffloadInfo->dhcpSrvOffloadEnabled; |
| cmd->num_client = pDhcpSrvOffloadInfo->dhcpClientNum; |
| cmd->srv_ipv4 = pDhcpSrvOffloadInfo->dhcpSrvIP; |
| cmd->start_lsb = pDhcpSrvOffloadInfo->dhcp_client_start_ip; |
| err = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| sizeof(*cmd), WMI_SET_DHCP_SERVER_OFFLOAD_CMDID); |
| if (err) { |
| WMA_LOGE("Failed to send set_dhcp_server_offload cmd"); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| WMA_LOGD("Set dhcp server offload to vdevId %d", |
| pDhcpSrvOffloadInfo->vdev_id); |
| return 0; |
| } |
| #endif /* DHCP_SERVER_OFFLOAD */ |
| |
| #ifdef WLAN_FEATURE_GPIO_LED_FLASHING |
| VOS_STATUS wma_set_led_flashing(tp_wma_handle wma_handle, |
| tSirLedFlashingReq *flashing) |
| { |
| wmi_set_led_flashing_cmd_fixed_param *cmd; |
| int status = 0; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| int32_t len = sizeof(wmi_set_led_flashing_cmd_fixed_param); |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE(FL("WMA is closed, can not issue cmd")); |
| return VOS_STATUS_E_INVAL; |
| } |
| if (!flashing) { |
| WMA_LOGE(FL("invalid parameter: flashing")); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP(FL("wmi_buf_alloc failed")); |
| return -ENOMEM; |
| } |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_set_led_flashing_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_set_led_flashing_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_set_led_flashing_cmd_fixed_param)); |
| cmd->pattern_id = flashing->pattern_id; |
| cmd->led_x0 = flashing->led_x0; |
| cmd->led_x1 = flashing->led_x1; |
| cmd->gpio_num = flashing->gpio_num; |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_PDEV_SET_LED_FLASHING_CMDID); |
| if (status != EOK) { |
| WMA_LOGE("%s: wmi_unified_cmd_send WMI_PEER_SET_PARAM_CMD" |
| " returned Error %d", |
| __func__, status); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| #endif |
| |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| static void wma_process_roam_invoke(WMA_HANDLE handle, |
| t_wma_roam_invoke_cmd *roaminvoke) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| wmi_roam_invoke_cmd_fixed_param* cmd; |
| wmi_buf_t wmi_buf; |
| u_int8_t *buf_ptr; |
| u_int16_t len, args_tlv_len; |
| A_UINT32 *channel_list; |
| wmi_mac_addr *bssid_list; |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not send roam invoke", |
| __func__); |
| return; |
| } |
| /* Host sends only one channel and one bssid */ |
| args_tlv_len = 2 * WMI_TLV_HDR_SIZE + sizeof(A_UINT32) + |
| sizeof(wmi_mac_addr); |
| len = sizeof(wmi_roam_invoke_cmd_fixed_param) + args_tlv_len; |
| wmi_buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmai_buf_alloc failed", __func__); |
| return; |
| } |
| |
| cmd = (wmi_roam_invoke_cmd_fixed_param *)wmi_buf_data(wmi_buf); |
| buf_ptr = (u_int8_t *) cmd; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_roam_invoke_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_roam_invoke_cmd_fixed_param)); |
| cmd->vdev_id = roaminvoke->vdev_id; |
| cmd->flags = 0; |
| cmd->roam_scan_mode = 0; |
| cmd->roam_ap_sel_mode = 0; |
| cmd->roam_delay = 0; |
| cmd->num_chan = 1; |
| cmd->num_bssid = 1; |
| buf_ptr += sizeof(wmi_roam_invoke_cmd_fixed_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_UINT32, |
| (sizeof(u_int32_t))); |
| channel_list = (A_UINT32 *)(buf_ptr + WMI_TLV_HDR_SIZE); |
| *channel_list = (A_UINT32)vos_chan_to_freq(roaminvoke->channel); |
| buf_ptr += sizeof(A_UINT32) + WMI_TLV_HDR_SIZE; |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_FIXED_STRUC, |
| (sizeof(wmi_mac_addr))); |
| bssid_list = (wmi_mac_addr *)(buf_ptr + WMI_TLV_HDR_SIZE); |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(roaminvoke->bssid, bssid_list); |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, wmi_buf, len, |
| WMI_ROAM_INVOKE_CMDID)) { |
| WMA_LOGP("%s: failed to send roam invoke command", __func__); |
| wmi_buf_free(wmi_buf); |
| return; |
| } |
| return; |
| } |
| #endif |
| |
| #ifdef MDNS_OFFLOAD |
| static int wma_set_mdns_offload(tp_wma_handle wma_handle, |
| tSirMDNSOffloadInfo *pMDNSInfo) |
| { |
| wmi_mdns_offload_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int err; |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, sizeof(*cmd)); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate buffer to send " |
| "set_mdns_offload cmd"); |
| return -ENOMEM; |
| } |
| |
| cmd = (wmi_mdns_offload_cmd_fixed_param *)wmi_buf_data(buf); |
| vos_mem_zero(cmd, sizeof(*cmd)); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_mdns_offload_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_mdns_offload_cmd_fixed_param)); |
| cmd->vdev_id = pMDNSInfo->vdev_id; |
| cmd->enable = pMDNSInfo->mDNSOffloadEnabled; |
| |
| err = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| sizeof(*cmd), WMI_MDNS_OFFLOAD_ENABLE_CMDID); |
| if (err) { |
| WMA_LOGE("Failed to send set_mdns_offload cmd"); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| WMA_LOGD("Set mDNS offload to vdevId %d", |
| pMDNSInfo->vdev_id); |
| return 0; |
| } |
| |
| static int wma_set_mdns_fqdn(tp_wma_handle wma_handle, |
| tSirMDNSFqdnInfo *pMDNSFqdnInfo) |
| { |
| wmi_mdns_set_fqdn_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| int len, err; |
| int num; |
| int numPadding = 0; |
| |
| /* mdns fqdn is a table of 2 TLV's */ |
| len = WMI_TLV_HDR_SIZE + pMDNSFqdnInfo->fqdn_len; |
| len += sizeof(wmi_mdns_set_fqdn_cmd_fixed_param); |
| num = len % sizeof(A_UINT32); |
| if (num > 0) { |
| numPadding = sizeof(A_UINT32) - num; |
| len += numPadding; |
| } |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate buffer to send " |
| "set_mdns_fqdn cmd"); |
| return -ENOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_mdns_set_fqdn_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_mdns_set_fqdn_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_mdns_set_fqdn_cmd_fixed_param)); |
| cmd->vdev_id = pMDNSFqdnInfo->vdev_id; |
| cmd->type = pMDNSFqdnInfo->fqdn_type; |
| cmd->fqdn_len = pMDNSFqdnInfo->fqdn_len; |
| |
| buf_ptr += sizeof(wmi_mdns_set_fqdn_cmd_fixed_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, (numPadding+cmd->fqdn_len)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| vos_mem_copy(buf_ptr, pMDNSFqdnInfo->fqdn_data, cmd->fqdn_len); |
| if (numPadding > 0) { |
| buf_ptr += cmd->fqdn_len; |
| vos_mem_zero(buf_ptr, numPadding); |
| } |
| |
| err = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_MDNS_SET_FQDN_CMDID); |
| if (err) { |
| WMA_LOGE("Failed to send set_mdns_fqdn cmd"); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| WMA_LOGD("Set mDNS fqdn to vdevId %d", |
| pMDNSFqdnInfo->vdev_id); |
| return 0; |
| } |
| |
| static int wma_set_mdns_response(tp_wma_handle wma_handle, |
| tSirMDNSResponseInfo *pMDNSRespInfo) |
| { |
| wmi_mdns_set_resp_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| int len, err; |
| int num; |
| int numPadding = 0; |
| |
| /* mdns response is a table of 2 TLV's */ |
| len = WMI_TLV_HDR_SIZE + pMDNSRespInfo->resp_len; |
| len += sizeof(wmi_mdns_set_resp_cmd_fixed_param); |
| num = len % sizeof(A_UINT32); |
| if (num > 0) { |
| numPadding = sizeof(A_UINT32) - num; |
| len += numPadding; |
| } |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate buffer to send " |
| "set_mdns_response cmd"); |
| return -ENOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_mdns_set_resp_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_mdns_set_resp_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_mdns_set_resp_cmd_fixed_param)); |
| cmd->vdev_id = pMDNSRespInfo->vdev_id; |
| cmd->AR_count = pMDNSRespInfo->resourceRecord_count; |
| cmd->resp_len = pMDNSRespInfo->resp_len; |
| |
| buf_ptr += sizeof(wmi_mdns_set_resp_cmd_fixed_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, (numPadding+cmd->resp_len)); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| vos_mem_copy(buf_ptr, pMDNSRespInfo->resp_data, cmd->resp_len); |
| if (numPadding > 0) { |
| buf_ptr += cmd->resp_len; |
| vos_mem_zero(buf_ptr, numPadding); |
| } |
| |
| err = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_MDNS_SET_RESPONSE_CMDID); |
| if (err) { |
| WMA_LOGE("Failed to set_mdns_response cmd"); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| WMA_LOGD("Set mDNS response to vdevId %d", |
| pMDNSRespInfo->vdev_id); |
| return 0; |
| } |
| |
| static int wma_get_mdns_status(tp_wma_handle wma_handle, A_UINT32 *pVdev_id) |
| { |
| wmi_mdns_get_stats_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int err; |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, sizeof(*cmd)); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate buffer to send " |
| "get_mdns_status cmd"); |
| return -ENOMEM; |
| } |
| |
| cmd = (wmi_mdns_get_stats_cmd_fixed_param *)wmi_buf_data(buf); |
| vos_mem_zero(cmd, sizeof(*cmd)); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_mdns_stats_event_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_mdns_get_stats_cmd_fixed_param)); |
| cmd->vdev_id = *pVdev_id; |
| |
| err = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| sizeof(*cmd), WMI_MDNS_GET_STATS_CMDID); |
| if (err) { |
| WMA_LOGE("Failed to send get_mdns_status cmd"); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| WMA_LOGD("Get mDNS STATS for vdevId %d", *pVdev_id); |
| return 0; |
| } |
| #endif /* MDNS_OFFLOAD */ |
| |
| |
| #ifdef SAP_AUTH_OFFLOAD |
| static int wma_process_sap_auth_offload(tp_wma_handle wma_handle, |
| struct tSirSapOffloadInfo *sap_auth_offload_info) |
| { |
| wmi_sap_ofl_enable_cmd_fixed_param *cmd = NULL; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| u_int16_t len, psk_len, psk_len_padded; |
| int err; |
| |
| if (!WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_SAP_AUTH_OFFLOAD)) { |
| WMA_LOGE("Firmware not support SAP auth offload feature"); |
| return -EIO; |
| } |
| |
| psk_len = sap_auth_offload_info->key_len; |
| psk_len_padded = roundup(psk_len, sizeof(uint32_t)); |
| |
| len = sizeof(*cmd) + WMI_TLV_HDR_SIZE + psk_len_padded; |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate buffer to send " |
| "sap_auth_offload_enable cmd"); |
| return -ENOMEM; |
| } |
| |
| vos_mem_zero(cmd, len); |
| |
| buf_ptr = wmi_buf_data(buf); |
| cmd = (wmi_sap_ofl_enable_cmd_fixed_param *)buf_ptr; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_sap_ofl_enable_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_sap_ofl_enable_cmd_fixed_param)); |
| |
| cmd->enable = sap_auth_offload_info->sap_auth_offload_enable; |
| cmd->vdev_id = sap_auth_offload_info->vdev_id; |
| cmd->psk_len = psk_len; |
| |
| /* SSID didn't assign here, left for Supplicant Profile Assign |
| * This field just keep for extendable |
| */ |
| switch (sap_auth_offload_info->sap_auth_offload_sec_type) { |
| case eSIR_OFFLOAD_WPA2PSK_CCMP: |
| cmd->rsn_authmode = WMI_AUTH_RSNA_PSK; |
| cmd->rsn_mcastcipherset = WMI_CIPHER_AES_CCM; |
| cmd->rsn_ucastcipherset = WMI_CIPHER_AES_CCM; |
| break; |
| case eSIR_OFFLOAD_NONE: |
| default: |
| WMA_LOGE("Set software AP Auth offload " |
| "with none support security type\n"); |
| break; |
| } |
| |
| buf_ptr += sizeof(wmi_sap_ofl_enable_cmd_fixed_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, psk_len_padded); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| vos_mem_copy(buf_ptr, sap_auth_offload_info->key, psk_len); |
| |
| err = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_SAP_OFL_ENABLE_CMDID); |
| if (err) { |
| WMA_LOGE("Failed to set software AP Auth offload enable cmd"); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| WMA_LOGD("Set software AP Auth offload enable = %d to vdevId %d", |
| sap_auth_offload_info->sap_auth_offload_enable, |
| sap_auth_offload_info->vdev_id); |
| return 0; |
| } |
| |
| /** |
| * wma_process_client_block_info send wmi cmd of block info to fw. |
| * |
| * @wma_handle: wma handler |
| * @client_block_info: client block info struct pointer |
| * |
| * Return: Return VOS_STATUS |
| */ |
| static VOS_STATUS wma_process_client_block_info(tp_wma_handle wma_handle, |
| struct sblock_info *client_block_info) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_sap_set_blacklist_param_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| u_int16_t len = sizeof(*cmd); |
| int ret; |
| |
| if (!client_block_info) |
| return VOS_STATUS_E_FAULT; |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed to allocate buffer",__func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (wmi_sap_set_blacklist_param_cmd_fixed_param *)wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_sap_set_blacklist_param_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_sap_set_blacklist_param_cmd_fixed_param)); |
| |
| cmd->vdev_id = client_block_info->vdev_id; |
| cmd->num_retry = client_block_info->reconnect_cnt; |
| cmd->retry_allow_time_ms = client_block_info->con_fail_duration; |
| cmd->blackout_time_ms = client_block_info->block_duration; |
| |
| WMA_LOGD("Set Sap client block info vdev id=%u, reconnect_cnt=%u" |
| "con_fail_duration=%u, block_duration=%u", |
| cmd->vdev_id, cmd->num_retry, |
| cmd->retry_allow_time_ms, cmd->blackout_time_ms); |
| |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_SAP_SET_BLACKLIST_PARAM_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE("fail to semd WMI_SAP_SET_BLACKLIST_PARAM_CMDID"); |
| wmi_buf_free(buf); |
| vos_status = VOS_STATUS_E_FAILURE; |
| } |
| |
| return vos_status; |
| } |
| #endif /* SAP_AUTH_OFFLOAD */ |
| |
| /** |
| * wma_process_set_mas() - Function to enable/disable MAS |
| * @wma: Pointer to WMA handle |
| * @mas_val: 1-Enable MAS, 0-Disable MAS |
| * |
| * This function enables/disables the MAS value |
| * |
| * Return: VOS_STATUS_SUCCESS for success otherwise failure |
| * |
| */ |
| VOS_STATUS wma_process_set_mas(tp_wma_handle wma, |
| uint32_t *mas_val) |
| { |
| uint32_t val; |
| |
| if (NULL == wma || NULL == mas_val) { |
| WMA_LOGE("%s: Invalid input to enable/disable MAS", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| val = (*mas_val); |
| |
| if (VOS_STATUS_SUCCESS != |
| wma_set_enable_disable_mcc_adaptive_scheduler(val)) { |
| WMA_LOGE("%s: Unable to enable/disable MAS", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } else { |
| WMA_LOGE("%s: Value is %d", __func__, val); |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_process_set_miracast() - Function to set miracast value in WMA |
| * @wma: Pointer to WMA handle |
| * @miracast_val: 0-Disabled,1-Source,2-Sink |
| * |
| * This function stores the miracast value in WMA |
| * |
| * Return: VOS_STATUS_SUCCESS for success otherwise failure |
| * |
| */ |
| VOS_STATUS wma_process_set_miracast(tp_wma_handle wma, u_int32_t *miracast_val) |
| { |
| if (NULL == wma || NULL == miracast_val) { |
| WMA_LOGE("%s: Invalid input to store miracast value", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| wma->miracast_value = *miracast_val; |
| WMA_LOGE("%s: Miracast value is %d", __func__, wma->miracast_value); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_config_stats_factor() - Function to configure stats avg. factor |
| * @wma: pointer to WMA handle |
| * @avg_factor: stats. avg. factor passed down by userspace |
| * |
| * This function configures the avg. stats value in firmware |
| * |
| * Return: VOS_STATUS_SUCCESS for success otherwise failure |
| * |
| */ |
| VOS_STATUS wma_config_stats_factor(tp_wma_handle wma, |
| struct sir_stats_avg_factor *avg_factor) |
| { |
| int ret; |
| |
| if (NULL == wma || NULL == avg_factor) { |
| WMA_LOGE("%s: Invalid input of stats avg factor", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, |
| avg_factor->vdev_id, |
| WMI_VDEV_PARAM_STATS_AVG_FACTOR, |
| avg_factor->stats_avg_factor); |
| if (ret) { |
| WMA_LOGE(" failed to set avg_factor for vdev_id %d", |
| avg_factor->vdev_id); |
| } |
| |
| WMA_LOGD("%s: Set stats_avg_factor %d for vdev_id %d", __func__, |
| avg_factor->stats_avg_factor, avg_factor->vdev_id); |
| |
| return ret; |
| } |
| |
| /** |
| * wma_config_guard_time() - Function to set guard time in firmware |
| * @wma: pointer to WMA handle |
| * @guard_time: guard time passed down by userspace |
| * |
| * This function configures the guard time in firmware |
| * |
| * Return: VOS_STATUS_SUCCESS for success otherwise failure |
| * |
| */ |
| VOS_STATUS wma_config_guard_time(tp_wma_handle wma, |
| struct sir_guard_time_request *guard_time) |
| { |
| int ret; |
| |
| if (NULL == wma || NULL == guard_time) { |
| WMA_LOGE("%s: Invalid input of guard time", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, |
| guard_time->vdev_id, |
| WMI_VDEV_PARAM_RX_LEAK_WINDOW, |
| guard_time->guard_time); |
| if (ret) { |
| WMA_LOGE(" failed to set guard time for vdev_id %d", |
| guard_time->vdev_id); |
| } |
| |
| WMA_LOGD("Set guard time %d for vdev_id %d", |
| guard_time->guard_time, guard_time->vdev_id); |
| |
| return ret; |
| } |
| |
| |
| /* |
| * wma_process_set_ie_info() - Function to send IE info to firmware |
| * @wma: Pointer to WMA handle |
| * @ie_data: Pointer for ie data |
| * |
| * This function sends IE information to firmware |
| * |
| * Return: VOS_STATUS_SUCCESS for success otherwise failure |
| * |
| */ |
| static VOS_STATUS wma_process_set_ie_info(tp_wma_handle wma, |
| struct vdev_ie_info* ie_info) |
| { |
| wmi_vdev_set_ie_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| uint8_t *buf_ptr; |
| uint32_t len, ie_len_aligned; |
| int ret; |
| |
| if (!ie_info || !wma) { |
| WMA_LOGE(FL("input pointer is NULL")); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| /* Validate the input */ |
| if (ie_info->length <= 0) { |
| WMA_LOGE(FL("Invalid IE length")); |
| return -EINVAL; |
| } |
| |
| ie_len_aligned = roundup(ie_info->length, sizeof(uint32_t)); |
| /* Allocate memory for the WMI command */ |
| len = sizeof(*cmd) + WMI_TLV_HDR_SIZE + ie_len_aligned; |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE(FL("wmi_buf_alloc failed")); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = wmi_buf_data(buf); |
| vos_mem_zero(buf_ptr, len); |
| |
| /* Populate the WMI command */ |
| cmd = (wmi_vdev_set_ie_cmd_fixed_param *)buf_ptr; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_set_ie_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_vdev_set_ie_cmd_fixed_param)); |
| cmd->vdev_id = ie_info->vdev_id; |
| cmd->ie_id = ie_info->ie_id; |
| cmd->ie_len = ie_info->length; |
| |
| WMA_LOGD(FL("IE:%d of size:%d sent for vdev:%d"), ie_info->ie_id, |
| ie_info->length, ie_info->vdev_id); |
| |
| buf_ptr += sizeof(*cmd); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, ie_len_aligned); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| |
| vos_mem_copy(buf_ptr, ie_info->data, cmd->ie_len); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_VDEV_SET_IE_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE(FL("Failed to send set IE command ret = %d"), ret); |
| wmi_buf_free(buf); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * wma_enable_specific_fw_logs() - Start/Stop logging of diag event/log id |
| * @wma_handle: WMA handle |
| * @start_log: Start logging related parameters |
| * |
| * Send the command to the FW based on which specific logging of diag |
| * event/log id can be started/stopped |
| * |
| * Return: None |
| */ |
| void wma_enable_specific_fw_logs(tp_wma_handle wma_handle, |
| struct sir_wifi_start_log *start_log) |
| { |
| wmi_diag_event_log_config_fixed_param *cmd; |
| wmi_buf_t buf; |
| uint8_t *buf_ptr; |
| uint32_t len, count, log_level, i; |
| uint32_t *cmd_args; |
| uint32_t total_len; |
| count = 0; |
| |
| if (!start_log) { |
| WMA_LOGE("%s: start_log pointer is NULL", __func__); |
| return; |
| } |
| if (!wma_handle) { |
| WMA_LOGE("%s: Invalid wma handle", __func__); |
| return; |
| } |
| |
| if (!((start_log->ring_id == RING_ID_CONNECTIVITY) || |
| (start_log->ring_id == RING_ID_FIRMWARE_DEBUG))) { |
| WMA_LOGD("%s: Not connectivity or fw debug ring: %d", |
| __func__, start_log->ring_id); |
| return; |
| } |
| |
| if (!wma_handle->events_logs_list) { |
| WMA_LOGE("%s: Not received event/log list from FW, yet", |
| __func__); |
| return; |
| } |
| |
| /* total_len stores the number of events where BITS 17 and 18 are set. |
| * i.e., events of high frequency (17) and for extended debugging (18) |
| */ |
| total_len = 0; |
| for (i = 0; i < wma_handle->num_of_diag_events_logs; i++) { |
| if ((WMI_DIAG_FREQUENCY_GET(wma_handle->events_logs_list[i])) && |
| (WMI_DIAG_EXT_FEATURE_GET(wma_handle->events_logs_list[i]))) |
| total_len++; |
| } |
| |
| len = sizeof(*cmd) + WMI_TLV_HDR_SIZE + |
| (total_len * sizeof(uint32_t)); |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return; |
| } |
| cmd = (wmi_diag_event_log_config_fixed_param *) wmi_buf_data(buf); |
| buf_ptr = (uint8_t *) cmd; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_diag_event_log_config_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_diag_event_log_config_fixed_param)); |
| |
| cmd->num_of_diag_events_logs = total_len; |
| |
| buf_ptr += sizeof(wmi_diag_event_log_config_fixed_param); |
| |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_UINT32, |
| (total_len * sizeof(uint32_t))); |
| |
| cmd_args = (uint32_t *) (buf_ptr + WMI_TLV_HDR_SIZE); |
| |
| if (start_log->verbose_level >= LOG_LEVEL_ACTIVE) |
| log_level = 1; |
| else |
| log_level = 0; |
| |
| WMA_LOGD("%s: Length:%d, Log_level:%d", __func__, total_len, log_level); |
| for (i = 0; i < wma_handle->num_of_diag_events_logs; i++) { |
| uint32_t val = wma_handle->events_logs_list[i]; |
| if ((WMI_DIAG_FREQUENCY_GET(val)) && |
| (WMI_DIAG_EXT_FEATURE_GET(val))) { |
| |
| WMI_DIAG_ID_SET(cmd_args[count], |
| WMI_DIAG_ID_GET(val)); |
| WMI_DIAG_TYPE_SET(cmd_args[count], |
| WMI_DIAG_TYPE_GET(val)); |
| WMI_DIAG_ID_ENABLED_DISABLED_SET(cmd_args[count], |
| log_level); |
| WMA_LOGD("%s: Idx:%d, val:%x", __func__, i, val); |
| count++; |
| } |
| } |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_DIAG_EVENT_LOG_CONFIG_CMDID)) { |
| WMA_LOGE("%s: WMI_DIAG_EVENT_LOG_CONFIG_CMDID failed", |
| __func__); |
| wmi_buf_free(buf); |
| } |
| return; |
| } |
| |
| #if !defined(REMOVE_PKT_LOG) |
| /** |
| * wma_set_wifi_start_packet_stats() - Start/stop packet stats |
| * @wma_handle: WMA handle |
| * @start_log: Struture containing the start wifi logger params |
| * |
| * This function is used to send the WMA commands to start/stop logging |
| * of per packet statistics |
| * |
| * Return: None |
| * |
| */ |
| void wma_set_wifi_start_packet_stats(void *wma_handle, |
| struct sir_wifi_start_log *start_log) |
| { |
| void *vos_context; |
| struct ol_softc *scn; |
| uint32_t log_state; |
| |
| if (!start_log) { |
| WMA_LOGE("%s: start_log pointer is NULL", __func__); |
| return; |
| } |
| if (!wma_handle) { |
| WMA_LOGE("%s: Invalid wma handle", __func__); |
| return; |
| } |
| |
| /* No need to register for ring IDs other than packet stats */ |
| if (start_log->ring_id != RING_ID_PER_PACKET_STATS) { |
| WMA_LOGI("%s: Ring id is not for per packet stats: %d", |
| __func__, start_log->ring_id); |
| return; |
| } |
| |
| vos_context = vos_get_global_context(VOS_MODULE_ID_WDA, NULL); |
| scn = vos_get_context(VOS_MODULE_ID_HIF, vos_context); |
| |
| if (!scn) { |
| WMA_LOGE("%s: ol_softc context is NULL\n", __func__); |
| return; |
| } |
| |
| log_state = ATH_PKTLOG_ANI | ATH_PKTLOG_RCUPDATE | ATH_PKTLOG_RCFIND | |
| ATH_PKTLOG_RX | ATH_PKTLOG_TX | ATH_PKTLOG_TEXT; |
| |
| if (start_log->verbose_level == WLAN_LOG_LEVEL_ACTIVE) { |
| pktlog_enable(scn, log_state); |
| WMA_LOGI("%s: Enabling per packet stats", __func__); |
| } else { |
| pktlog_enable(scn, 0); |
| WMA_LOGI("%s: Disabling per packet stats", __func__); |
| } |
| } |
| #endif |
| |
| /** |
| * wma_send_flush_logs_to_fw() - Send log flush command to FW |
| * @wma_handle: WMI handle |
| * |
| * This function is used to send the flush command to the FW, |
| * that will flush the fw logs that are residue in the FW |
| * |
| * Return: None |
| */ |
| void wma_send_flush_logs_to_fw(tp_wma_handle wma_handle) |
| { |
| VOS_STATUS status; |
| wmi_debug_mesg_flush_fixed_param *cmd; |
| wmi_buf_t buf; |
| int len = sizeof(*cmd); |
| int ret; |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: wmi_buf_alloc failed", __func__); |
| return; |
| } |
| |
| cmd = (wmi_debug_mesg_flush_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_debug_mesg_flush_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_debug_mesg_flush_fixed_param)); |
| cmd->reserved0 = 0; |
| |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, |
| buf, |
| len, |
| WMI_DEBUG_MESG_FLUSH_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE("Failed to send WMI_DEBUG_MESG_FLUSH_CMDID"); |
| wmi_buf_free(buf); |
| return; |
| } |
| WMA_LOGI("Sent WMI_DEBUG_MESG_FLUSH_CMDID to FW"); |
| |
| status = vos_timer_start(&wma_handle->log_completion_timer, |
| WMA_LOG_COMPLETION_TIMER); |
| if (status != VOS_STATUS_SUCCESS) |
| WMA_LOGE("Failed to start the log completion timer"); |
| } |
| |
| /** |
| * wma_set_rssi_monitoring() - set rssi monitoring |
| * @handle: WMA handle |
| * @req: rssi monitoring request structure |
| * |
| * This function reads the incoming @req and fill in the destination |
| * WMI structure and send down the rssi monitoring configs down to the firmware |
| * |
| * Return: 0 on success; error number otherwise |
| */ |
| static VOS_STATUS wma_set_rssi_monitoring(tp_wma_handle wma, |
| struct rssi_monitor_req *req) |
| { |
| wmi_rssi_breach_monitor_config_fixed_param *cmd; |
| wmi_buf_t buf; |
| int ret, len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (wmi_rssi_breach_monitor_config_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_rssi_breach_monitor_config_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_rssi_breach_monitor_config_fixed_param)); |
| |
| cmd->vdev_id = req->session_id; |
| cmd->request_id = req->request_id; |
| cmd->lo_rssi_reenable_hysteresis = 0; |
| cmd->hi_rssi_reenable_histeresis = 0; |
| cmd->min_report_interval = 0; |
| cmd->max_num_report = 1; |
| if (req->control) { |
| /* enable one threshold for each min/max */ |
| cmd->enabled_bitmap = 0x09; |
| cmd->low_rssi_breach_threshold[0] = req->min_rssi; |
| cmd->hi_rssi_breach_threshold[0] = req->max_rssi; |
| } else { |
| cmd->enabled_bitmap = 0; |
| cmd->low_rssi_breach_threshold[0] = 0; |
| cmd->hi_rssi_breach_threshold[0] = 0; |
| } |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_RSSI_BREACH_MONITOR_CONFIG_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE("Failed to send WMI_RSSI_BREACH_MONITOR_CONFIG_CMDID"); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGI("Sent WMI_RSSI_BREACH_MONITOR_CONFIG_CMDID to FW"); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| |
| #ifdef WLAN_FEATURE_UDP_RESPONSE_OFFLOAD |
| /** |
| * wma_send_udp_resp_offload_cmd() - send wmi cmd of udp response offload |
| * infomation to fw. |
| * @wma_handle: wma handler |
| * @udp_response: udp_resp_offload struct pointer |
| * |
| * Return: Return VOS_STATUS |
| */ |
| static VOS_STATUS wma_send_udp_resp_offload_cmd(tp_wma_handle wma_handle, |
| struct udp_resp_offload *udp_response) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_buf_t buf; |
| WMI_WOW_UDP_SVC_OFLD_CMD_fixed_param *cmd; |
| u_int16_t len; |
| u_int16_t pattern_len = 0; |
| u_int16_t response_len = 0; |
| u_int16_t udp_len = 0; |
| u_int16_t resp_len = 0; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| if (1 == udp_response->enable) { |
| pattern_len = strlen(udp_response->udp_payload_filter); |
| response_len = strlen(udp_response->udp_response_payload); |
| } |
| |
| udp_len = (pattern_len % 4) ? |
| (4 * ((pattern_len / 4) + 1)) : (pattern_len); |
| |
| resp_len = (response_len % 4) ? |
| (4 * ((response_len / 4) + 1)) : (response_len); |
| |
| |
| len = sizeof(*cmd) + udp_len + resp_len + 2 * WMI_TLV_HDR_SIZE; |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("wmi_buf_alloc failed"); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (WMI_WOW_UDP_SVC_OFLD_CMD_fixed_param *)wmi_buf_data(buf); |
| vos_mem_zero(cmd, len); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_WOW_UDP_SVC_OFLD_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| WMI_WOW_UDP_SVC_OFLD_CMD_fixed_param)); |
| |
| cmd->vdev_id = udp_response->vdev_id; |
| cmd->enable = udp_response->enable; |
| cmd->dest_port = udp_response->dest_port; |
| cmd->pattern_len = pattern_len; |
| cmd->response_len = response_len; |
| |
| |
| WMITLV_SET_HDR((A_UINT32 *)(cmd + 1), |
| WMITLV_TAG_ARRAY_BYTE, |
| udp_len); |
| |
| vos_mem_copy((void *)(cmd + 1) + WMI_TLV_HDR_SIZE, |
| (void *)udp_response->udp_payload_filter, |
| cmd->pattern_len); |
| WMITLV_SET_HDR((A_UINT32 *)((void *)(cmd + 1) + |
| WMI_TLV_HDR_SIZE + udp_len), |
| WMITLV_TAG_ARRAY_BYTE, |
| resp_len); |
| |
| vos_mem_copy((void *)(cmd + 1) + WMI_TLV_HDR_SIZE + |
| udp_len + WMI_TLV_HDR_SIZE, |
| (void *)udp_response->udp_response_payload, |
| cmd->response_len); |
| |
| |
| |
| WMA_LOGD("wma_set_udp_resp_cmd: enable:%d vdev_id:%d dest_port:%u", |
| cmd->enable,cmd->vdev_id, cmd->dest_port); |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_WOW_UDP_SVC_OFLD_CMDID)) { |
| WMA_LOGE("Failed to send set udp resp offload"); |
| wmi_buf_free(buf); |
| vos_status = VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("%s: Exit", __func__); |
| return vos_status; |
| } |
| #else |
| static inline VOS_STATUS wma_send_udp_resp_offload_cmd(tp_wma_handle wma_handle, |
| struct udp_resp_offload *udp_response) |
| { |
| return VOS_STATUS_E_FAILURE; |
| } |
| #endif |
| |
| |
| |
| #ifdef WLAN_FEATURE_WOW_PULSE |
| |
| |
| #define WMI_WOW_HOSTWAKEUP_GPIO_CMD_FIXED_PARAM \ |
| WMI_WOW_HOSTWAKEUP_GPIO_PIN_PATTERN_CONFIG_CMD_fixed_param |
| |
| |
| #define WMITLV_TAG_HOSTWAKEUP_GPIO_CMD_FIXED_PARAM \ |
| WMITLV_TAG_STRUC_wmi_wow_hostwakeup_gpio_pin_pattern_config_cmd_fixed_param |
| |
| /* |
| * the repeat_cnt is reserved by FW team, the current value |
| * is always 0xffffffff |
| */ |
| #define WMI_WOW_PULSE_REPEAT_CNT 0xffffffff |
| |
| /** |
| * wma_send_wow_pulse_cmd() - send wmi cmd of wow pulse cmd |
| * infomation to fw. |
| * @wma_handle: wma handler |
| * @udp_response: wow_pulse_mode pointer |
| * |
| * Return: Return VOS_STATUS |
| */ |
| static VOS_STATUS wma_send_wow_pulse_cmd(tp_wma_handle wma_handle, |
| struct wow_pulse_mode *wow_pulse_cmd) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_buf_t buf; |
| WMI_WOW_HOSTWAKEUP_GPIO_CMD_FIXED_PARAM *cmd; |
| u_int16_t len; |
| |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("wmi_buf_alloc failed"); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (WMI_WOW_HOSTWAKEUP_GPIO_CMD_FIXED_PARAM *)wmi_buf_data(buf); |
| vos_mem_zero(cmd, len); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_HOSTWAKEUP_GPIO_CMD_FIXED_PARAM, |
| WMITLV_GET_STRUCT_TLVLEN( |
| WMI_WOW_HOSTWAKEUP_GPIO_CMD_FIXED_PARAM)); |
| |
| cmd->enable = wow_pulse_cmd->wow_pulse_enable; |
| cmd->pin = wow_pulse_cmd->wow_pulse_pin; |
| cmd->interval_low = wow_pulse_cmd->wow_pulse_interval_low; |
| cmd->interval_high = wow_pulse_cmd->wow_pulse_interval_high; |
| cmd->repeat_cnt = WMI_WOW_PULSE_REPEAT_CNT; |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_WOW_HOSTWAKEUP_GPIO_PIN_PATTERN_CONFIG_CMDID)) { |
| WMA_LOGE("Failed to send send wow pulse"); |
| wmi_buf_free(buf); |
| vos_status = VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("%s: Exit", __func__); |
| return vos_status; |
| } |
| |
| #undef WMI_WOW_HOSTWAKEUP_GPIO_CMD_FIXED_PARAM |
| #undef WMITLV_TAG_HOSTWAKEUP_GPIO_CMD_FIXED_PARAM |
| #undef WMI_WOW_PULSE_REPEAT_CNT |
| |
| #else |
| static inline VOS_STATUS wma_send_wow_pulse_cmd(tp_wma_handle wma_handle, |
| struct wow_pulse_mode *wow_pulse_cmd) |
| { |
| return VOS_STATUS_E_FAILURE; |
| } |
| #endif |
| |
| /** |
| * wma_send_wakeup_gpio_cmd() - send wmi cmd of wakeup gpio cmd |
| * infomation to fw. |
| * @wma_handle: wma handler |
| * @wakeup_gpio_cmd: wakeup_gpio_mode pointer |
| * |
| * Return: Return VOS_STATUS |
| */ |
| static VOS_STATUS wma_send_wakeup_gpio_cmd(tp_wma_handle wma_handle, |
| struct wakeup_gpio_mode *wakeup_gpio_cmd) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_buf_t buf; |
| WMI_PDEV_SET_WAKEUP_CONFIG_CMDID_fixed_param *cmd; |
| u_int16_t len; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("wmi_buf_alloc failed"); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| cmd = (WMI_PDEV_SET_WAKEUP_CONFIG_CMDID_fixed_param *)wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_PDEV_SET_WAKEUP_CONFIG_CMDID_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| WMI_PDEV_SET_WAKEUP_CONFIG_CMDID_fixed_param)); |
| |
| cmd->host_wakeup_gpio = wakeup_gpio_cmd->host_wakeup_gpio; |
| cmd->host_wakeup_type = wakeup_gpio_cmd->host_wakeup_type; |
| cmd->target_wakeup_gpio = wakeup_gpio_cmd->target_wakeup_gpio; |
| cmd->target_wakeup_type = wakeup_gpio_cmd->target_wakeup_type; |
| |
| WMA_LOGD("%s:host gpio:%d host type:%d target gpio:%d target type:%d", |
| __func__, cmd->host_wakeup_gpio, cmd->host_wakeup_type, |
| cmd->target_wakeup_gpio, cmd->target_wakeup_type); |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_PDEV_SET_WAKEUP_CONFIG_CMDID)) { |
| WMA_LOGE("Failed to send wakeup gpio cmd"); |
| wmi_buf_free(buf); |
| vos_status = VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("%s: Exit", __func__); |
| return vos_status; |
| } |
| |
| /* |
| * wma_update_wep_default_key - function to update default key id |
| * @wma: pointer to wma handler |
| * @update_def_key: pointer to wep_update_default_key_idx |
| * |
| * function makes a copy of default key index to txrx node |
| * |
| * return: Success |
| */ |
| static VOS_STATUS wma_update_wep_default_key(tp_wma_handle wma, |
| struct wep_update_default_key_idx *update_def_key) |
| { |
| struct wma_txrx_node *iface = |
| &wma->interfaces[update_def_key->session_id]; |
| iface->wep_default_key_idx = update_def_key->default_idx; |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_update_tx_rate: Update max tx_rate to firmware |
| * @wma_handle: wma handle |
| * @req: Set max tx_rate parameters to firmware |
| * For the specific hardware mode validate the max tx_rate value specified |
| * by the user. |
| * WMA_RESET_MAX_RATE: Is specified to switch back to max rate index for the |
| * specified hardware mode. |
| * Return: VOS_STATUS enumeration. |
| */ |
| static VOS_STATUS wma_update_tx_rate(tp_wma_handle wma, |
| struct sir_txrate_update *req) |
| { |
| struct wma_txrx_node *intr = wma->interfaces; |
| wmi_peer_max_min_tx_rate peer_max_min_tx_rate; |
| uint16_t tx_rate = (req->txrate); |
| |
| WMA_LOGI("%s: Enter", __func__); |
| peer_max_min_tx_rate.tx_rate = tx_rate; |
| switch (intr[req->session_id].chanmode) { |
| case MODE_11A: |
| case MODE_11G: |
| case MODE_11GONLY: |
| |
| if ((tx_rate >= 0 && tx_rate <= WMI_MAX_OFDM_TX_RATE)) { |
| /* Do Nothing*/ |
| } else if (tx_rate == WMA_RESET_MAX_RATE) |
| peer_max_min_tx_rate.tx_rate = WMI_MAX_OFDM_TX_RATE; |
| else { |
| WMA_LOGE("invalid rate for MODE_11A/MODE11_G"); |
| return -EINVAL; |
| } |
| peer_max_min_tx_rate.mode = WMI_RATE_PREAMBLE_OFDM; |
| break; |
| case MODE_11B: |
| |
| if ((tx_rate >= 0 && tx_rate <= WMI_MAX_CCK_TX_RATE)) { |
| /* Do nothing*/ |
| } else if (tx_rate == WMA_RESET_MAX_RATE) |
| peer_max_min_tx_rate.tx_rate = WMI_MAX_CCK_TX_RATE; |
| else { |
| WMA_LOGE("invalid rate for Mode MODE_11B"); |
| return -EINVAL; |
| } |
| peer_max_min_tx_rate.mode = WMI_RATE_PREAMBLE_CCK; |
| break; |
| case MODE_11NA_HT20: |
| case MODE_11NG_HT20: |
| case MODE_11NA_HT40: |
| case MODE_11NG_HT40: |
| if ((tx_rate >= 0 && tx_rate <= WMI_MAX_HT_TX_MCS)) { |
| /* Do nothing*/ |
| } else if (tx_rate == WMA_RESET_MAX_RATE) |
| peer_max_min_tx_rate.tx_rate = WMI_MAX_HT_TX_MCS; |
| else { |
| WMA_LOGE("invalid rate for Mode MODE_11N"); |
| return -EINVAL; |
| } |
| peer_max_min_tx_rate.mode = WMI_RATE_PREAMBLE_HT; |
| break; |
| case MODE_11AC_VHT20: |
| case MODE_11AC_VHT40: |
| case MODE_11AC_VHT80: |
| case MODE_11AC_VHT20_2G: |
| case MODE_11AC_VHT40_2G: |
| #if CONFIG_160MHZ_SUPPORT |
| case MODE_11AC_VHT80_80: |
| case MODE_11AC_VHT160: |
| #endif |
| if ((tx_rate >= 0 && tx_rate <= WMI_MAX_VHT_TX_MCS)) { |
| /* Do nothing*/ |
| } else if (tx_rate == WMA_RESET_MAX_RATE) |
| peer_max_min_tx_rate.tx_rate = WMI_MAX_VHT_TX_MCS; |
| else { |
| WMA_LOGE("invalid rate for Mode MODE_11N"); |
| return -EINVAL; |
| } |
| peer_max_min_tx_rate.mode = WMI_RATE_PREAMBLE_VHT; |
| break; |
| default: |
| WMA_LOGE("%s: Error not supported mode", __func__); |
| return -EINVAL; |
| } |
| WMA_LOGD(FL("tx_rate: %d hwmode: %d"), peer_max_min_tx_rate.tx_rate, |
| peer_max_min_tx_rate.mode); |
| wma_set_peer_param(wma, req->bssid, |
| WMI_PEER_SET_MAX_TX_RATE , |
| (peer_max_min_tx_rate.mode | |
| (peer_max_min_tx_rate.tx_rate << 16)), |
| req->session_id); |
| WMA_LOGI("%s: Exit", __func__); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_get_bpf_capabilities - Send get bpf capability to firmware |
| * @wma_handle: wma handle |
| * |
| * Return: VOS_STATUS enumeration. |
| */ |
| static VOS_STATUS wma_get_bpf_capabilities(tp_wma_handle wma) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_bpf_get_capability_cmd_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len; |
| u_int8_t *buf_ptr; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE(FL("WMA is closed, can not issue get BPF capab")); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| if (!WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_BPF_OFFLOAD)) { |
| WMA_LOGE(FL("BPF cababilities feature bit not enabled")); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| len = sizeof(*cmd); |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(wmi_buf); |
| cmd = (wmi_bpf_get_capability_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_bpf_get_capability_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_bpf_get_capability_cmd_fixed_param)); |
| |
| if (wmi_unified_cmd_send(wma->wmi_handle, wmi_buf, len, |
| WMI_BPF_GET_CAPABILITY_CMDID)) { |
| WMA_LOGE(FL("Failed to send BPF capability command")); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return vos_status; |
| } |
| |
| /** |
| * wma_set_beacon_filter() - Issue WMI command to set beacon filter |
| * @wma: wma handler |
| * @filter_params: beacon_filter_param to set |
| * |
| * Return: Return VOS_STATUS |
| */ |
| static VOS_STATUS wma_set_beacon_filter(tp_wma_handle wma, |
| struct beacon_filter_param *filter_params) |
| { |
| int i; |
| wmi_buf_t wmi_buf; |
| u_int8_t *buf; |
| A_UINT32 *ie_map; |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| wmi_add_bcn_filter_cmd_fixed_param *cmd; |
| int len = sizeof(wmi_add_bcn_filter_cmd_fixed_param); |
| |
| len += WMI_TLV_HDR_SIZE; |
| len += BCN_FLT_MAX_ELEMS_IE_LIST*sizeof(A_UINT32); |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue set beacon filter", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf = (u_int8_t *) wmi_buf_data(wmi_buf); |
| |
| cmd = (wmi_add_bcn_filter_cmd_fixed_param *)wmi_buf_data(wmi_buf); |
| cmd->vdev_id = filter_params->vdev_id; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_add_bcn_filter_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_add_bcn_filter_cmd_fixed_param)); |
| |
| buf += sizeof(wmi_add_bcn_filter_cmd_fixed_param); |
| |
| WMITLV_SET_HDR(buf, WMITLV_TAG_ARRAY_UINT32, |
| (BCN_FLT_MAX_ELEMS_IE_LIST * sizeof(u_int32_t))); |
| |
| ie_map = (A_UINT32 *)(buf + WMI_TLV_HDR_SIZE); |
| for (i = 0; i < BCN_FLT_MAX_ELEMS_IE_LIST; i++) { |
| ie_map[i] = filter_params->ie_map[i]; |
| WMA_LOGD("beacon filter ie map = %u", ie_map[i]); |
| } |
| |
| vos_status = wmi_unified_cmd_send(wma->wmi_handle, wmi_buf, len, |
| WMI_ADD_BCN_FILTER_CMDID); |
| if (vos_status < 0) { |
| WMA_LOGE("Failed to send wmi add beacon filter = %d", |
| vos_status); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return vos_status; |
| } |
| |
| /** |
| * wma_remove_beacon_filter() - Issue WMI command to remove beacon filter |
| * @wma: wma handler |
| * @filter_params: beacon_filter_params |
| * |
| * Return: Return VOS_STATUS |
| */ |
| static VOS_STATUS wma_remove_beacon_filter(tp_wma_handle wma, |
| struct beacon_filter_param *filter_params) |
| { |
| wmi_buf_t buf; |
| wmi_rmv_bcn_filter_cmd_fixed_param *cmd; |
| int len = sizeof(wmi_rmv_bcn_filter_cmd_fixed_param); |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, cannot issue remove beacon filter", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| cmd = (wmi_rmv_bcn_filter_cmd_fixed_param *)wmi_buf_data(buf); |
| cmd->vdev_id = filter_params->vdev_id; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_rmv_bcn_filter_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_rmv_bcn_filter_cmd_fixed_param)); |
| |
| vos_status = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_RMV_BCN_FILTER_CMDID); |
| if (vos_status < 0) { |
| WMA_LOGE("Failed to send wmi remove beacon filter = %d", |
| vos_status); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return vos_status; |
| } |
| |
| /** |
| * wma_set_bpf_instructions - Set bpf instructions to firmware |
| * @wma: wma handle |
| * @bpf_set_offload: Bpf offload information to set to firmware |
| * |
| * Return: VOS_STATUS enumeration |
| */ |
| static VOS_STATUS wma_set_bpf_instructions(tp_wma_handle wma, |
| struct sir_bpf_set_offload *bpf_set_offload) |
| { |
| wmi_bpf_set_vdev_instructions_cmd_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len = 0, len_aligned = 0; |
| u_int8_t *buf_ptr; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue set BPF capability", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| if (!WMI_SERVICE_IS_ENABLED(wma->wmi_service_bitmap, |
| WMI_SERVICE_BPF_OFFLOAD)) { |
| WMA_LOGE(FL("BPF offload feature Disabled")); |
| return VOS_STATUS_E_NOSUPPORT; |
| } |
| |
| if (bpf_set_offload->total_length) { |
| len_aligned = roundup(bpf_set_offload->current_length, |
| sizeof(A_UINT32)); |
| len = len_aligned + WMI_TLV_HDR_SIZE; |
| } |
| |
| len += sizeof(*cmd); |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(wmi_buf); |
| cmd = (wmi_bpf_set_vdev_instructions_cmd_fixed_param *) buf_ptr; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_bpf_set_vdev_instructions_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_bpf_set_vdev_instructions_cmd_fixed_param)); |
| cmd->vdev_id = bpf_set_offload->session_id; |
| cmd->filter_id = bpf_set_offload->filter_id; |
| cmd->total_length = bpf_set_offload->total_length; |
| cmd->current_offset = bpf_set_offload->current_offset; |
| cmd->current_length = bpf_set_offload->current_length; |
| |
| if (bpf_set_offload->total_length) { |
| buf_ptr += |
| sizeof(wmi_bpf_set_vdev_instructions_cmd_fixed_param); |
| WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_BYTE, len_aligned); |
| buf_ptr += WMI_TLV_HDR_SIZE; |
| vos_mem_copy(buf_ptr, bpf_set_offload->program, |
| bpf_set_offload->current_length); |
| } |
| |
| if (wmi_unified_cmd_send(wma->wmi_handle, wmi_buf, len, |
| WMI_BPF_SET_VDEV_INSTRUCTIONS_CMDID)) { |
| WMA_LOGE(FL("Failed to send config bpf instructions command")); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_get_wakelock_stats() - Collects wake lock stats |
| * @wake_lock_stats: wakelock structure to be filled |
| * |
| * This function collects wake lock stats |
| * |
| * Return: VOS_STATUS_SUCCESS on success, error number otherwise |
| */ |
| VOS_STATUS wma_get_wakelock_stats(struct sir_wake_lock_stats *wake_lock_stats) |
| { |
| tp_wma_handle wma_handle; |
| |
| wma_handle = vos_get_context(VOS_MODULE_ID_WDA, |
| vos_get_global_context(VOS_MODULE_ID_WDA, NULL)); |
| |
| if (!wake_lock_stats) { |
| WMA_LOGE("%s: invalid pointer", __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| if (!wma_handle) { |
| WMA_LOGE("%s: WMA context is invalid!", __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| wake_lock_stats->wow_ucast_wake_up_count = |
| wma_handle->wow_ucast_wake_up_count; |
| wake_lock_stats->wow_bcast_wake_up_count = |
| wma_handle->wow_bcast_wake_up_count; |
| wake_lock_stats->wow_ipv4_mcast_wake_up_count = |
| wma_handle->wow_ipv4_mcast_wake_up_count; |
| wake_lock_stats->wow_ipv6_mcast_wake_up_count = |
| wma_handle->wow_ipv6_mcast_wake_up_count; |
| wake_lock_stats->wow_ipv6_mcast_ra_stats = |
| wma_handle->wow_ipv6_mcast_ra_stats; |
| wake_lock_stats->wow_ipv6_mcast_ns_stats = |
| wma_handle->wow_ipv6_mcast_ns_stats; |
| wake_lock_stats->wow_ipv6_mcast_na_stats = |
| wma_handle->wow_ipv6_mcast_na_stats; |
| wake_lock_stats->wow_icmpv4_count = wma_handle->wow_icmpv4_count; |
| wake_lock_stats->wow_icmpv6_count = |
| wma_handle->wow_icmpv6_count; |
| wake_lock_stats->wow_rssi_breach_wake_up_count = |
| wma_handle->wow_rssi_breach_wake_up_count; |
| wake_lock_stats->wow_low_rssi_wake_up_count = |
| wma_handle->wow_low_rssi_wake_up_count; |
| wake_lock_stats->wow_gscan_wake_up_count = |
| wma_handle->wow_gscan_wake_up_count; |
| wake_lock_stats->wow_pno_complete_wake_up_count = |
| wma_handle->wow_pno_complete_wake_up_count; |
| wake_lock_stats->wow_pno_match_wake_up_count = |
| wma_handle->wow_pno_match_wake_up_count; |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_enable_disable_caevent_ind() - Issue WMI command to enable or |
| * disable ca event indication |
| * @wma: wma handler |
| * @filter_params: boolean value true or false |
| * |
| * Return: Return VOS_STATUS |
| */ |
| VOS_STATUS wma_enable_disable_caevent_ind(tp_wma_handle wma, |
| uint8_t val) |
| { |
| WMI_CHAN_AVOID_RPT_ALLOW_CMD_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| u_int8_t *buf_ptr; |
| uint32_t len; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE(FL("WMA is closed, can not issue set/clear CA")); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| len = sizeof(*cmd); |
| wmi_buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (u_int8_t *) wmi_buf_data(wmi_buf); |
| cmd = (WMI_CHAN_AVOID_RPT_ALLOW_CMD_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_CHAN_AVOID_RPT_ALLOW_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| WMI_CHAN_AVOID_RPT_ALLOW_CMD_fixed_param)); |
| cmd->rpt_allow = val; |
| if (wmi_unified_cmd_send(wma->wmi_handle, wmi_buf, len, |
| WMI_CHAN_AVOID_RPT_ALLOW_CMDID)) { |
| WMA_LOGE(FL("Failed to send enable/disable CA event command")); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_set_tx_rx_aggregation_size() - sets tx rx aggregation sizes |
| * @tx_rx_aggregation_size: aggregation size parameters |
| * |
| * This function sets tx rx aggregation sizes |
| * |
| * Return: VOS_STATUS_SUCCESS on success, error number otherwise |
| */ |
| VOS_STATUS wma_set_tx_rx_aggregation_size |
| (struct sir_set_tx_rx_aggregation_size *tx_rx_aggregation_size) |
| { |
| tp_wma_handle wma_handle; |
| wmi_vdev_set_custom_aggr_size_cmd_fixed_param *cmd; |
| int32_t len; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| int ret; |
| |
| wma_handle = vos_get_context(VOS_MODULE_ID_WDA, |
| vos_get_global_context(VOS_MODULE_ID_WDA, NULL)); |
| |
| if (!tx_rx_aggregation_size) { |
| WMA_LOGE("%s: invalid pointer", __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| if (!wma_handle) { |
| WMA_LOGE("%s: WMA context is invald!", __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_vdev_set_custom_aggr_size_cmd_fixed_param *) buf_ptr; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_set_custom_aggr_size_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_vdev_set_custom_aggr_size_cmd_fixed_param)); |
| |
| cmd->vdev_id = tx_rx_aggregation_size->vdev_id; |
| cmd->tx_aggr_size = tx_rx_aggregation_size->tx_aggregation_size; |
| cmd->rx_aggr_size = tx_rx_aggregation_size->rx_aggregation_size; |
| |
| WMA_LOGI("tx aggr: %d rx aggr: %d vdev: %d", |
| cmd->tx_aggr_size, cmd->rx_aggr_size, cmd->vdev_id); |
| |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_VDEV_SET_CUSTOM_AGGR_SIZE_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send aggregation size command", |
| __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_set_powersave_config() - update power save config in wma |
| * @val: new power save value |
| * @vdev_id: vdev id |
| * |
| * This function update qpower value in wma layer |
| * |
| * Return: VOS_STATUS_SUCCESS on success, error number otherwise |
| */ |
| VOS_STATUS wma_set_powersave_config(uint8_t vdev_id, uint8_t val) |
| { |
| tp_wma_handle wma_handle; |
| |
| wma_handle = vos_get_context(VOS_MODULE_ID_WDA, |
| vos_get_global_context(VOS_MODULE_ID_WDA, NULL)); |
| |
| WMA_LOGI("configuring qpower: %d vdev %d", val, vdev_id); |
| if (!wma_handle) { |
| WMA_LOGE("%s: WMA context is invald!", __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| wma_handle->powersave_mode = val; |
| |
| return wmi_unified_set_sta_ps_param(wma_handle->wmi_handle, |
| vdev_id, |
| WMI_STA_PS_ENABLE_QPOWER, |
| wma_get_qpower_config(wma_handle)); |
| } |
| |
| /** |
| * wma_process_set_allowed_action_frames_ind() - Set bitmap to wma cache |
| * @wma_handle: WMI handle |
| * @allowed_action_frames: sir_allowed_action_frames parameter |
| * |
| * This function is used to set the allowed action frames to wma cache, |
| * that will allow the fw to wake up the host about the expected action frame. |
| * |
| * Return: None |
| */ |
| void wma_process_set_allowed_action_frames_ind(tp_wma_handle wma_handle, |
| struct sir_allowed_action_frames *allowed_action_frames) |
| { |
| uint32_t i; |
| |
| wma_handle->allowed_action_frames.operation = |
| allowed_action_frames->operation; |
| WMA_LOGD("%s: action frames wow operation type = %d", |
| __func__, allowed_action_frames->operation); |
| |
| for (i = 0; i < (SIR_MAC_ACTION_MAX / 32); i++) { |
| wma_handle->allowed_action_frames.action_category_map[i] = |
| allowed_action_frames->action_category_map[i]; |
| WMA_LOGD("%s: action frames wow bitmap%d = 0x%x", __func__, |
| i, allowed_action_frames->action_category_map[i]); |
| } |
| |
| for (i = 0; i < SIR_MAC_ACTION_MAX; i++) { |
| wma_handle->allowed_action_frames.action_per_category[i] = |
| allowed_action_frames->action_per_category[i]; |
| } |
| |
| WMA_LOGD("Spectrum mgmt action frames drop pattern 0x%x", |
| wma_handle->allowed_action_frames. |
| action_per_category[SIR_MAC_ACTION_SPECTRUM_MGMT]); |
| return; |
| } |
| |
| static VOS_STATUS wma_get_chain_rssi(tp_wma_handle wma_handle, |
| struct get_chain_rssi_req_params *req_params) |
| { |
| wmi_pdev_div_get_rssi_antid_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len = sizeof(wmi_pdev_div_get_rssi_antid_fixed_param); |
| u_int8_t *buf_ptr; |
| |
| if (!wma_handle) { |
| WMA_LOGE(FL("WMA is closed, can not issue cmd")); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| wmi_buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE(FL("wmi_buf_alloc failed")); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *)wmi_buf_data(wmi_buf); |
| |
| cmd = (wmi_pdev_div_get_rssi_antid_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_pdev_div_get_rssi_antid_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_pdev_div_get_rssi_antid_fixed_param)); |
| cmd->pdev_id = 0; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(req_params->peer_macaddr.bytes, |
| &cmd->macaddr); |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, wmi_buf, len, |
| WMI_PDEV_DIV_GET_RSSI_ANTID_CMDID)) { |
| WMA_LOGE(FL("failed to send get chain rssi command")); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_update_tx_fail_cnt_th() - Set threshold for TX pkt fail |
| * @wma_handle: WMA handle |
| * @tx_fail_cnt_th: sme_tx_fail_cnt_threshold parameter |
| * |
| * This function is used to set Tx pkt fail count threshold, |
| * FW will do disconnect with station once this threshold is reached. |
| * |
| * Return: VOS_STATUS_SUCCESS on success, error number otherwise |
| */ |
| static VOS_STATUS wma_update_tx_fail_cnt_th(tp_wma_handle wma, |
| struct sme_tx_fail_cnt_threshold *tx_fail_cnt_th) |
| { |
| u_int8_t vdev_id; |
| u_int32_t tx_fail_disconn_th; |
| int ret = -EIO; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE(FL("WMA is closed, can not issue Tx pkt fail count threshold")); |
| return VOS_STATUS_E_INVAL; |
| } |
| vdev_id = tx_fail_cnt_th->session_id; |
| tx_fail_disconn_th = tx_fail_cnt_th->tx_fail_cnt_threshold; |
| WMA_LOGD("Set TX pkt fail count threshold vdevId %d count %d", |
| vdev_id, tx_fail_disconn_th); |
| |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_DISCONNECT_TH, |
| tx_fail_disconn_th); |
| |
| if (ret) { |
| WMA_LOGE(FL("Failed to send TX pkt fail count threshold command")); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_update_short_retry_limit() - Set retry limit for short frames |
| * @wma_handle: WMA handle |
| * @short_retry_limit_th: retry limir count for Short frames. |
| * |
| * This function is used to configure the transmission retry limit at which |
| * short frames needs to be retry. |
| * |
| * Return: VOS_STATUS_SUCCESS on success, error number otherwise |
| */ |
| static VOS_STATUS wma_update_short_retry_limit(tp_wma_handle wma, |
| struct sme_short_retry_limit *short_retry_limit_th) |
| { |
| u_int8_t vdev_id; |
| u_int8_t short_retry_limit; |
| int ret = -EIO; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE(FL("WMA is closed, can not issue short retry limit threshold")); |
| return VOS_STATUS_E_INVAL; |
| } |
| vdev_id = short_retry_limit_th->session_id; |
| short_retry_limit = short_retry_limit_th->short_retry_limit; |
| WMA_LOGD("Set short retry limit threshold vdevId %d count %d", |
| vdev_id, short_retry_limit); |
| |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_NON_AGG_SW_RETRY_TH , |
| short_retry_limit); |
| |
| if (ret) { |
| WMA_LOGE(FL("Failed to send short limit threshold command")); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_update_long_retry_limit() - Set retry limit for long frames |
| * @wma_handle: WMA handle |
| * @long_retry_limit_th: retry limir count for long frames |
| * |
| * This function is used to configure the transmission retry limit at which |
| * long frames needs to be retry |
| * |
| * Return: VOS_STATUS_SUCCESS on success, error number otherwise |
| */ |
| static VOS_STATUS wma_update_long_retry_limit(tp_wma_handle wma, |
| struct sme_long_retry_limit *long_retry_limit_th) |
| { |
| u_int8_t vdev_id; |
| u_int8_t long_retry_limit; |
| int ret = -EIO; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE(FL("WMA is closed, can not issue long retry limit threshold")); |
| return VOS_STATUS_E_INVAL; |
| } |
| vdev_id = long_retry_limit_th->session_id; |
| long_retry_limit = long_retry_limit_th->long_retry_limit; |
| WMA_LOGD("Set long retry limit threshold vdevId %d count %d", |
| vdev_id, long_retry_limit); |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_AGG_SW_RETRY_TH, |
| long_retry_limit); |
| |
| if (ret) { |
| WMA_LOGE(FL("Failed to send long limit threshold command")); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* |
| * wma_update_sta_inactivity_timeout() - Set sta_inactivity_timeout to fw |
| * @wma_handle: WMA handle |
| * @sta_inactivity_timer: sme_sta_inactivity_timeout |
| * |
| * This function is used to set sta_inactivity_timeout. |
| * If a station does not send anything in sta_inactivity_timeout seconds, an |
| * empty data frame is sent to it in order to verify whether it is |
| * still in range. If this frame is not ACKed, the station will be |
| * disassociated and then deauthenticated. |
| * |
| * Return: None |
| */ |
| static void wma_update_sta_inactivity_timeout(tp_wma_handle wma, |
| struct sme_sta_inactivity_timeout *sta_inactivity_timer) |
| { |
| u_int8_t vdev_id; |
| u_int32_t max_unresponsive_time; |
| u_int32_t min_inactive_time, max_inactive_time; |
| |
| if (!wma || !wma->wmi_handle) { |
| WMA_LOGE(FL("WMA is closed, can not issue sta_inactivity_timeout")); |
| return; |
| } |
| vdev_id = sta_inactivity_timer->session_id; |
| max_unresponsive_time = sta_inactivity_timer->sta_inactivity_timeout; |
| max_inactive_time = max_unresponsive_time* 2/3; |
| min_inactive_time = max_unresponsive_time - max_inactive_time ; |
| |
| if (wmi_unified_vdev_set_param_send(wma->wmi_handle, |
| vdev_id, |
| WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, |
| min_inactive_time)) |
| WMA_LOGE("Failed to Set AP MIN IDLE INACTIVE TIME"); |
| |
| if (wmi_unified_vdev_set_param_send(wma->wmi_handle, |
| vdev_id, |
| WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, |
| max_inactive_time)) |
| WMA_LOGE("Failed to Set AP MAX IDLE INACTIVE TIME"); |
| |
| |
| if (wmi_unified_vdev_set_param_send(wma->wmi_handle, |
| vdev_id, |
| WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, |
| max_unresponsive_time)) |
| WMA_LOGE("Failed to Set MAX UNRESPONSIVE TIME"); |
| |
| WMA_LOGD("%s:vdev_id:%d min_inactive_time: %u max_inactive_time: %u" |
| " max_unresponsive_time: %u", __func__, vdev_id, |
| min_inactive_time, max_inactive_time, max_unresponsive_time); |
| |
| return; |
| } |
| |
| /** |
| * wma_process_power_debug_stats_req() - Process the Chip Power stats collect |
| * request and pass the Power stats request to Fw |
| * @wma_handle: WMA handle |
| * |
| * Return: VOS_STATUS |
| */ |
| #ifdef WLAN_POWER_DEBUGFS |
| static VOS_STATUS wma_process_power_debug_stats_req(tp_wma_handle wma_handle) |
| { |
| wmi_pdev_get_chip_power_stats_cmd_fixed_param *cmd; |
| int32_t len; |
| wmi_buf_t buf; |
| uint8_t *buf_ptr; |
| int ret; |
| |
| if (!wma_handle) { |
| WMA_LOGE("%s: input pointer is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s: Failed allocate wmi buffer", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_pdev_get_chip_power_stats_cmd_fixed_param *) buf_ptr; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_get_chip_power_stats_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_pdev_get_chip_power_stats_cmd_fixed_param)); |
| cmd->pdev_id = 0; |
| |
| WMA_LOGD("POWER_DEBUG_STATS - Get Request Params; Pdev id - %d", |
| cmd->pdev_id); |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_PDEV_GET_CHIP_POWER_STATS_CMDID); |
| if (ret) { |
| WMA_LOGE("%s: Failed to send power debug stats request", |
| __func__); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| } |
| #else |
| static VOS_STATUS wma_process_power_debug_stats_req(tp_wma_handle wma_handle) |
| { |
| return VOS_STATUS_SUCCESS; |
| } |
| #endif |
| |
| /** |
| * wma_set_rx_reorder_timeout_val() - set rx recorder timeout value |
| * @wma_handle: pointer to wma handle |
| * @sir_set_rx_reorder_timeout_val: rx recorder timeout value |
| * |
| * Return: VOS_STATUS_SUCCESS for success or error code. |
| */ |
| static VOS_STATUS wma_set_rx_reorder_timeout_val(tp_wma_handle wma_handle, |
| struct sir_set_rx_reorder_timeout_val *reorder_timeout) |
| { |
| wmi_pdev_set_reorder_timeout_val_cmd_fixed_param *cmd; |
| uint32_t len; |
| wmi_buf_t buf; |
| int ret; |
| |
| if (!reorder_timeout) { |
| WMA_LOGE(FL("invalid pointer")); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| if (!wma_handle) { |
| WMA_LOGE(FL("WMA context is invald!")); |
| return VOS_STATUS_E_INVAL; |
| } |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| |
| if (!buf) { |
| WMA_LOGE(FL("Failed allocate wmi buffer")); |
| return VOS_STATUS_E_NOMEM; |
| } |
| cmd = (wmi_pdev_set_reorder_timeout_val_cmd_fixed_param *) |
| wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_pdev_set_reorder_timeout_val_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_pdev_set_reorder_timeout_val_cmd_fixed_param)); |
| |
| memcpy(cmd->rx_timeout_pri, reorder_timeout->rx_timeout_pri, |
| sizeof(reorder_timeout->rx_timeout_pri)); |
| |
| WMA_LOGD("rx aggr record timeout: VO: %d, VI: %d, BE: %d, BK: %d", |
| cmd->rx_timeout_pri[0], cmd->rx_timeout_pri[1], |
| cmd->rx_timeout_pri[2], cmd->rx_timeout_pri[3]); |
| |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_PDEV_SET_REORDER_TIMEOUT_VAL_CMDID); |
| if (ret) { |
| WMA_LOGE(FL("Failed to send aggregation timeout")); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_set_rx_blocksize() - set rx blocksize |
| * @wma_handle: pointer to wma handle |
| * @sir_peer_set_rx_blocksize: rx blocksize for peer mac |
| * |
| * Return: VOS_STATUS_SUCCESS for success or error code. |
| */ |
| static VOS_STATUS wma_set_rx_blocksize(tp_wma_handle wma_handle, |
| struct sir_peer_set_rx_blocksize *peer_rx_blocksize) |
| { |
| wmi_peer_set_rx_blocksize_cmd_fixed_param *cmd; |
| int32_t len; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| int ret; |
| |
| if (!peer_rx_blocksize) { |
| WMA_LOGE(FL("invalid pointer")); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| if (!wma_handle) { |
| WMA_LOGE(FL(" WMA context is invald!")); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| |
| if (!buf) { |
| WMA_LOGE(FL("Failed allocate wmi buffer")); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_peer_set_rx_blocksize_cmd_fixed_param *) buf_ptr; |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_peer_set_rx_blocksize_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_peer_set_rx_blocksize_cmd_fixed_param)); |
| |
| cmd->vdev_id = peer_rx_blocksize->vdev_id; |
| cmd->rx_block_ack_win_limit = |
| peer_rx_blocksize->rx_block_ack_win_limit; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(peer_rx_blocksize->peer_macaddr.bytes, |
| &cmd->peer_macaddr); |
| |
| WMA_LOGD("rx aggr blocksize: %d", cmd->rx_block_ack_win_limit); |
| |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_PEER_SET_RX_BLOCKSIZE_CMDID); |
| if (ret) { |
| WMA_LOGE(FL("Failed to send aggregation size command")); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_process_action_frame_random_mac() - set/clear action frame random mac |
| * @wma_handle: pointer to wma handle |
| * @filter: pointer to buffer containing random mac, session_id and callback |
| * |
| * Return: VOS_STATUS_SUCCESS for success or error code. |
| */ |
| static VOS_STATUS |
| wma_process_action_frame_random_mac(tp_wma_handle wma_handle, |
| struct action_frame_random_filter *filter) |
| { |
| wmi_vdev_add_mac_addr_to_rx_filter_cmd_fixed_param *cmd; |
| uint32_t len; |
| wmi_buf_t buf; |
| int ret; |
| struct action_frame_random_filter *filter_bkup = NULL; |
| struct wma_txrx_node *intr = NULL; |
| |
| if (!filter) { |
| WMA_LOGE(FL("invalid pointer")); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| if (!wma_handle) { |
| WMA_LOGE(FL("WMA context is invald!")); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| if (filter->filter_type == SME_ACTION_FRAME_RANDOM_MAC_SET) { |
| intr = &wma_handle->interfaces[filter->session_id]; |
| /* command is in progess */ |
| if(intr->action_frame_filter != NULL) { |
| WMA_LOGE(FL("previous action frame req is pending")); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| filter_bkup = adf_os_mem_alloc(NULL, sizeof(*filter)); |
| if (!filter_bkup) { |
| WMA_LOGE( |
| FL("action frame filter mem alloc failed")); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| adf_os_mem_set(filter_bkup, 0, sizeof(*filter)); |
| filter_bkup->session_id = filter->session_id; |
| filter_bkup->callback = filter->callback; |
| filter_bkup->filter_type = filter->filter_type; |
| filter_bkup->context = filter->context; |
| |
| vos_mem_copy(filter_bkup->mac_addr, filter->mac_addr, |
| VOS_MAC_ADDR_SIZE); |
| intr->action_frame_filter = (void *)filter_bkup; |
| } |
| |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| |
| if (!buf) { |
| WMA_LOGE(FL("Failed allocate wmi buffer")); |
| return VOS_STATUS_E_NOMEM; |
| } |
| cmd = (wmi_vdev_add_mac_addr_to_rx_filter_cmd_fixed_param *) |
| wmi_buf_data(buf); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_vdev_add_mac_addr_to_rx_filter_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_vdev_add_mac_addr_to_rx_filter_cmd_fixed_param)); |
| |
| cmd->vdev_id = filter->session_id; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(filter->mac_addr, &cmd->mac_addr); |
| if (filter->filter_type == SME_ACTION_FRAME_RANDOM_MAC_SET) |
| cmd->enable = 1; |
| else |
| cmd->enable = 0; |
| |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_CMDID); |
| if (ret) { |
| WMA_LOGE(FL("Failed to send action frame random mac cmd")); |
| wmi_buf_free(buf); |
| if (filter->filter_type == SME_ACTION_FRAME_RANDOM_MAC_SET) { |
| adf_os_mem_free(filter_bkup); |
| intr->action_frame_filter = NULL; |
| } |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static VOS_STATUS wma_get_isolation(tp_wma_handle wma) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle)wma; |
| wmi_coex_get_antenna_isolation_cmd_fixed_param *cmd; |
| wmi_buf_t wmi_buf; |
| uint32_t len; |
| uint8_t *buf_ptr; |
| |
| WMA_LOGE("%s: get isolation", |
| __func__); |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue get isolation", |
| __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| len = sizeof(wmi_coex_get_antenna_isolation_cmd_fixed_param); |
| wmi_buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| buf_ptr = (uint8_t *)wmi_buf_data(wmi_buf); |
| |
| cmd = (wmi_coex_get_antenna_isolation_cmd_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_coex_get_antenna_isolation_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_coex_get_antenna_isolation_cmd_fixed_param)); |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, wmi_buf, len, |
| WMI_COEX_GET_ANTENNA_ISOLATION_CMDID)) { |
| WMA_LOGE("Failed to get isolation request from fw"); |
| wmi_buf_free(wmi_buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* |
| * function : wma_mc_process_msg |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_mc_process_msg(v_VOID_t *vos_context, vos_msg_t *msg) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| tp_wma_handle wma_handle; |
| ol_txrx_vdev_handle txrx_vdev_handle = NULL; |
| extern tANI_U8* macTraceGetWdaMsgString( tANI_U16 wdaMsg ); |
| |
| if(NULL == msg) { |
| WMA_LOGE("msg is NULL"); |
| VOS_ASSERT(0); |
| vos_status = VOS_STATUS_E_INVAL; |
| goto end; |
| } |
| |
| WMA_LOGD(FL(" msg->type = %x %s"), |
| msg->type, macTraceGetWdaMsgString(msg->type)); |
| |
| wma_handle = (tp_wma_handle) vos_get_context(VOS_MODULE_ID_WDA, |
| vos_context); |
| |
| if (NULL == wma_handle) { |
| WMA_LOGP("%s: wma_handle is NULL", __func__); |
| VOS_ASSERT(0); |
| vos_mem_free(msg->bodyptr); |
| vos_status = VOS_STATUS_E_INVAL; |
| goto end; |
| } |
| |
| switch (msg->type) { |
| #ifdef FEATURE_WLAN_ESE |
| case WDA_TSM_STATS_REQ: |
| WMA_LOGA("McThread: WDA_TSM_STATS_REQ"); |
| wma_process_tsm_stats_req(wma_handle, (void*)msg->bodyptr); |
| break; |
| #endif |
| case WNI_CFG_DNLD_REQ: |
| WMA_LOGA("McThread: WNI_CFG_DNLD_REQ"); |
| vos_status = wma_wni_cfg_dnld(wma_handle); |
| if (VOS_IS_STATUS_SUCCESS(vos_status)) { |
| vos_WDAComplete_cback(vos_context); |
| } |
| else { |
| WMA_LOGD("config download failure"); |
| } |
| break ; |
| case WDA_ADD_STA_SELF_REQ: |
| txrx_vdev_handle = wma_vdev_attach(wma_handle, |
| (tAddStaSelfParams *)msg->bodyptr, 1); |
| if (!txrx_vdev_handle) { |
| WMA_LOGE("Failed to attach vdev"); |
| } else { |
| WLANTL_RegisterVdev(vos_context, |
| txrx_vdev_handle); |
| /* Register with TxRx Module for Data Ack Complete Cb */ |
| wdi_in_data_tx_cb_set(txrx_vdev_handle, |
| wma_data_tx_ack_comp_hdlr, wma_handle); |
| } |
| break; |
| case WDA_DEL_STA_SELF_REQ: |
| wma_vdev_detach(wma_handle, |
| (tDelStaSelfParams *)msg->bodyptr, 1); |
| break; |
| case WDA_START_SCAN_OFFLOAD_REQ: |
| wma_start_scan(wma_handle, msg->bodyptr, msg->type); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_STOP_SCAN_OFFLOAD_REQ: |
| wma_stop_scan(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_UPDATE_CHAN_LIST_REQ: |
| wma_update_channel_list(wma_handle, |
| (tSirUpdateChanList *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SET_LINK_STATE: |
| wma_set_linkstate(wma_handle, |
| (tpLinkStateParams)msg->bodyptr); |
| break; |
| case WDA_CHNL_SWITCH_REQ: |
| wma_set_channel(wma_handle, |
| (tpSwitchChannelParams)msg->bodyptr); |
| break; |
| case WDA_ADD_BSS_REQ: |
| wma_add_bss(wma_handle, (tpAddBssParams)msg->bodyptr); |
| break; |
| case WDA_ADD_STA_REQ: |
| wma_add_sta(wma_handle, (tpAddStaParams)msg->bodyptr); |
| break; |
| case WDA_SET_BSSKEY_REQ: |
| wma_set_bsskey(wma_handle, |
| (tpSetBssKeyParams)msg->bodyptr); |
| break; |
| case WDA_SET_STAKEY_REQ: |
| wma_set_stakey(wma_handle, |
| (tpSetStaKeyParams)msg->bodyptr); |
| break; |
| case WDA_DELETE_STA_REQ: |
| wma_delete_sta(wma_handle, |
| (tpDeleteStaParams)msg->bodyptr); |
| break; |
| case WDA_DELETE_BSS_REQ: |
| wma_delete_bss(wma_handle, |
| (tpDeleteBssParams)msg->bodyptr); |
| break; |
| case WDA_UPDATE_EDCA_PROFILE_IND: |
| wma_process_update_edca_param_req( |
| wma_handle, |
| (tEdcaParams *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SEND_BEACON_REQ: |
| wma_send_beacon(wma_handle, |
| (tpSendbeaconParams)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SEND_PROBE_RSP_TMPL: |
| wma_send_probe_rsp_tmpl(wma_handle, |
| (tpSendProbeRespParams)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_CLI_SET_CMD: |
| wma_process_cli_set_cmd(wma_handle, |
| (wda_cli_set_cmd_t *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SET_PDEV_IE_REQ: |
| wma_process_set_pdev_ie_req(wma_handle, |
| (struct set_ie_param *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #if !defined(REMOVE_PKT_LOG) |
| case WDA_PKTLOG_ENABLE_REQ: |
| wma_pktlog_wmi_send_cmd(wma_handle, |
| (struct ath_pktlog_wmi_params *) |
| msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #endif |
| #if defined(QCA_WIFI_FTM) |
| case WDA_FTM_CMD_REQ: |
| wma_process_ftm_command(wma_handle, |
| (struct ar6k_testmode_cmd_data *)msg->bodyptr); |
| break; |
| #endif |
| case WDA_ENTER_BMPS_REQ: |
| wma_enable_sta_ps_mode(wma_handle, |
| (tpEnablePsParams)msg->bodyptr); |
| break; |
| case WDA_EXIT_BMPS_REQ: |
| wma_disable_sta_ps_mode(wma_handle, |
| (tpDisablePsParams)msg->bodyptr); |
| break; |
| case WDA_ENTER_UAPSD_REQ: |
| wma_enable_uapsd_mode(wma_handle, |
| (tpEnableUapsdParams)msg->bodyptr); |
| break; |
| case WDA_EXIT_UAPSD_REQ: |
| wma_disable_uapsd_mode(wma_handle, |
| (tpDisableUapsdParams)msg->bodyptr); |
| break; |
| case WDA_SET_TX_POWER_REQ: |
| wma_set_tx_power(wma_handle, |
| (tpMaxTxPowerParams)msg->bodyptr); |
| break; |
| case WDA_SET_MAX_TX_POWER_REQ: |
| wma_set_max_tx_power(wma_handle, |
| (tpMaxTxPowerParams)msg->bodyptr); |
| break; |
| case WDA_SET_KEEP_ALIVE: |
| wma_set_keepalive_req(wma_handle, |
| (tSirKeepAliveReq *)msg->bodyptr); |
| break; |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| case WDA_SET_PNO_REQ: |
| wma_config_pno(wma_handle, |
| (tpSirPNOScanReq)msg->bodyptr); |
| break; |
| |
| case WDA_SME_SCAN_CACHE_UPDATED: |
| wma_scan_cache_updated_ind(wma_handle, msg->bodyval); |
| break; |
| #endif |
| #if defined(FEATURE_WLAN_ESE) && defined(FEATURE_WLAN_ESE_UPLOAD) |
| case WDA_SET_PLM_REQ: |
| wma_config_plm(wma_handle, |
| (tpSirPlmReq)msg->bodyptr); |
| break; |
| #endif |
| case WDA_GET_STATISTICS_REQ: |
| wma_get_stats_req(wma_handle, |
| (tAniGetPEStatsReq *) msg->bodyptr); |
| break; |
| |
| case WDA_MIB_STATS_REQ: |
| wma_process_mib_stats_req(wma_handle, |
| (struct get_mib_stats_req *) |
| msg->bodyptr); |
| break; |
| |
| case WDA_CONFIG_PARAM_UPDATE_REQ: |
| wma_update_cfg_params(wma_handle, |
| (tSirMsgQ *)msg); |
| break; |
| |
| case WDA_INIT_SCAN_REQ: |
| wma_init_scan_req(wma_handle, |
| (tInitScanParams *)msg->bodyptr); |
| break; |
| |
| case WDA_FINISH_SCAN_REQ: |
| wma_finish_scan_req(wma_handle, |
| (tFinishScanParams *)msg->bodyptr); |
| break; |
| case WDA_UPDATE_OP_MODE: |
| wma_process_update_opmode(wma_handle, |
| (tUpdateVHTOpMode *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_UPDATE_RX_NSS: |
| wma_process_update_rx_nss(wma_handle, |
| (tUpdateRxNss *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #ifdef WLAN_FEATURE_11AC |
| case WDA_UPDATE_MEMBERSHIP: |
| wma_process_update_membership(wma_handle, |
| (tUpdateMembership *)msg->bodyptr); |
| break; |
| case WDA_UPDATE_USERPOS: |
| wma_process_update_userpos(wma_handle, |
| (tUpdateUserPos *)msg->bodyptr); |
| break; |
| #endif |
| case WDA_UPDATE_BEACON_IND: |
| wma_process_update_beacon_params(wma_handle, |
| (tUpdateBeaconParams *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| |
| case WDA_ADD_TS_REQ: |
| wma_add_ts_req(wma_handle, (tAddTsParams *)msg->bodyptr); |
| break; |
| |
| case WDA_DEL_TS_REQ: |
| wma_del_ts_req(wma_handle, (tDelTsParams *)msg->bodyptr); |
| break; |
| |
| case WDA_AGGR_QOS_REQ: |
| wma_aggr_qos_req(wma_handle, (tAggrAddTsParams *)msg->bodyptr); |
| break; |
| |
| case WDA_RECEIVE_FILTER_SET_FILTER_REQ: |
| wma_process_receive_filter_set_filter_req(wma_handle, |
| (tSirRcvPktFilterCfgType *)msg->bodyptr); |
| break; |
| |
| case WDA_RECEIVE_FILTER_CLEAR_FILTER_REQ: |
| wma_process_receive_filter_clear_filter_req(wma_handle, |
| (tSirRcvFltPktClearParam *)msg->bodyptr); |
| break; |
| |
| case WDA_WOWL_ADD_BCAST_PTRN: |
| wma_wow_add_pattern(wma_handle, |
| (tpSirWowlAddBcastPtrn)msg->bodyptr); |
| break; |
| case WDA_WOWL_DEL_BCAST_PTRN: |
| wma_wow_del_pattern(wma_handle, |
| (tpSirWowlDelBcastPtrn)msg->bodyptr); |
| break; |
| case WDA_WOWL_ENTER_REQ: |
| wma_wow_enter(wma_handle, |
| (tpSirHalWowlEnterParams)msg->bodyptr); |
| break; |
| case WDA_WOWL_EXIT_REQ: |
| wma_wow_exit(wma_handle, |
| (tpSirHalWowlExitParams)msg->bodyptr); |
| break; |
| case WDA_WLAN_SUSPEND_IND: |
| wma_suspend_req(wma_handle, |
| (tpSirWlanSuspendParam)msg->bodyptr); |
| break; |
| case WDA_8023_MULTICAST_LIST_REQ: |
| wma_process_mcbc_set_filter_req(wma_handle, |
| (tpSirRcvFltMcAddrList)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #ifdef WLAN_FEATURE_GTK_OFFLOAD |
| case WDA_GTK_OFFLOAD_REQ: |
| wma_process_gtk_offload_req( |
| wma_handle, |
| (tpSirGtkOffloadParams)msg->bodyptr); |
| break; |
| |
| case WDA_GTK_OFFLOAD_GETINFO_REQ: |
| wma_process_gtk_offload_getinfo_req( |
| wma_handle, |
| (tpSirGtkOffloadGetInfoRspParams)msg->bodyptr); |
| break; |
| #endif /* WLAN_FEATURE_GTK_OFFLOAD */ |
| #ifdef FEATURE_OEM_DATA_SUPPORT |
| case WDA_START_OEM_DATA_REQ: |
| wma_start_oem_data_req(wma_handle, |
| (tStartOemDataReq *)msg->bodyptr); |
| break; |
| #endif /* FEATURE_OEM_DATA_SUPPORT */ |
| case WDA_SET_HOST_OFFLOAD: |
| wma_enable_arp_ns_offload(wma_handle, (tpSirHostOffloadReq)msg->bodyptr, true); |
| break; |
| #ifdef WLAN_NS_OFFLOAD |
| case WDA_SET_NS_OFFLOAD: |
| wma_enable_arp_ns_offload(wma_handle, (tpSirHostOffloadReq)msg->bodyptr, false); |
| break; |
| #endif /*WLAN_NS_OFFLOAD */ |
| case WDA_ROAM_SCAN_OFFLOAD_REQ: |
| /* |
| * Main entry point or roaming directives from CSR. |
| */ |
| wma_process_roam_scan_req(wma_handle, |
| (tSirRoamOffloadScanReq *)msg->bodyptr); |
| break; |
| |
| case WDA_RATE_UPDATE_IND: |
| wma_process_rate_update_indicate(wma_handle, (tSirRateUpdateInd *)msg->bodyptr); |
| break; |
| |
| #ifdef FEATURE_WLAN_TDLS |
| case WDA_UPDATE_FW_TDLS_STATE: |
| wma_update_fw_tdls_state(wma_handle, |
| (t_wma_tdls_params *)msg->bodyptr); |
| break; |
| case WDA_UPDATE_TDLS_PEER_STATE: |
| wma_update_tdls_peer_state(wma_handle, |
| (tTdlsPeerStateParams *)msg->bodyptr); |
| break; |
| case WDA_TDLS_SET_OFFCHAN_MODE: |
| wma_set_tdls_offchan_mode(wma_handle, |
| (tTdlsChanSwitchParams*)msg->bodyptr); |
| break; |
| #endif /* FEATURE_WLAN_TDLS */ |
| case WDA_ADD_PERIODIC_TX_PTRN_IND: |
| wma_ProcessAddPeriodicTxPtrnInd(wma_handle, |
| (tSirAddPeriodicTxPtrn *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_DEL_PERIODIC_TX_PTRN_IND: |
| wma_ProcessDelPeriodicTxPtrnInd(wma_handle, |
| (tSirDelPeriodicTxPtrn *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_TX_POWER_LIMIT: |
| wma_ProcessTxPowerLimits(wma_handle, |
| (tSirTxPowerLimit *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #ifdef FEATURE_WLAN_LPHB |
| case WDA_LPHB_CONF_REQ: |
| wma_process_lphb_conf_req(wma_handle, (tSirLPHBReq *)msg->bodyptr); |
| break; |
| #endif |
| |
| #ifdef FEATURE_WLAN_CH_AVOID |
| case WDA_CH_AVOID_UPDATE_REQ: |
| wma_process_ch_avoid_update_req(wma_handle, |
| (tSirChAvoidUpdateReq *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #endif |
| #ifdef FEATURE_WLAN_AUTO_SHUTDOWN |
| case WDA_SET_AUTO_SHUTDOWN_TIMER_REQ: |
| wma_set_auto_shutdown_timer_req(wma_handle, |
| msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #endif |
| case WDA_DHCP_START_IND: |
| case WDA_DHCP_STOP_IND: |
| wma_process_dhcp_ind(wma_handle, |
| (tAniDHCPInd *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| |
| case WDA_IBSS_CESIUM_ENABLE_IND: |
| wma_process_cesium_enable_ind(wma_handle); |
| break; |
| case WDA_GET_IBSS_PEER_INFO_REQ: |
| wma_process_get_peer_info_req(wma_handle, |
| (tSirIbssGetPeerInfoReqParams *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_TX_FAIL_MONITOR_IND: |
| wma_process_tx_fail_monitor_ind(wma_handle, |
| (tAniTXFailMonitorInd *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| |
| case WDA_RMC_ENABLE_IND: |
| wma_process_rmc_enable_ind(wma_handle); |
| break; |
| case WDA_RMC_DISABLE_IND: |
| wma_process_rmc_disable_ind(wma_handle); |
| break; |
| case WDA_RMC_ACTION_PERIOD_IND: |
| wma_process_rmc_action_period_ind(wma_handle); |
| break; |
| |
| case WDA_INIT_THERMAL_INFO_CMD: |
| wma_process_init_thermal_info(wma_handle, (t_thermal_mgmt *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| |
| case WDA_SET_THERMAL_LEVEL: |
| wma_process_set_thermal_level(wma_handle, msg->bodyval); |
| break; |
| |
| case WDA_INIT_BAD_PEER_TX_CTL_INFO_CMD: |
| wma_process_init_bad_peer_tx_ctl_info(wma_handle, |
| (struct t_bad_peer_txtcl_config *) msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| |
| case WDA_SET_P2P_GO_NOA_REQ: |
| wma_process_set_p2pgo_noa_Req(wma_handle, |
| (tP2pPsParams *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SET_MIMOPS_REQ: |
| wma_process_set_mimops_req(wma_handle, (tSetMIMOPS *) msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SET_SAP_INTRABSS_DIS: |
| wma_set_vdev_intrabss_fwd(wma_handle, (tDisableIntraBssFwd *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_FW_STATS_IND: |
| wma_fw_stats_ind(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_GET_LINK_SPEED: |
| wma_get_link_speed(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_GET_PEER_INFO: |
| wma_get_peer_info(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_GET_PEER_INFO_EXT: |
| wma_get_peer_info_ext(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_MODEM_POWER_STATE_IND: |
| wma_notify_modem_power_state(wma_handle, |
| (tSirModemPowerStateInd *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_VDEV_STOP_IND: |
| wma_vdev_stop_ind(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_WLAN_RESUME_REQ: |
| wma_resume_req(wma_handle, false); |
| break; |
| |
| #ifdef WLAN_FEATURE_STATS_EXT |
| case WDA_STATS_EXT_REQUEST: |
| wma_stats_ext_req(wma_handle, |
| (tpStatsExtRequest)(msg->bodyptr)); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #endif |
| case WDA_HIDDEN_SSID_VDEV_RESTART: |
| wma_hidden_ssid_vdev_restart(wma_handle, |
| (tHalHiddenSsidVdevRestart *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #ifdef WLAN_FEATURE_EXTWOW_SUPPORT |
| case WDA_WLAN_EXT_WOW: |
| wma_enable_ext_wow(wma_handle, |
| (tSirExtWoWParams *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_WLAN_SET_APP_TYPE1_PARAMS: |
| wma_set_app_type1_params_in_fw(wma_handle, |
| (tSirAppType1Params *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_WLAN_SET_APP_TYPE2_PARAMS: |
| wma_set_app_type2_params_in_fw(wma_handle, |
| (tSirAppType2Params *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #endif |
| case WDA_VDEV_START_RSP_IND: |
| wma_vdev_start_rsp_ind(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_ROAM_PREAUTH_IND: |
| wma_roam_preauth_ind(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_TBTT_UPDATE_IND: |
| wma_tbtt_update_ind(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #ifdef FEATURE_WLAN_EXTSCAN |
| case WDA_EXTSCAN_START_REQ: |
| wma_start_extscan(wma_handle, |
| (tSirWifiScanCmdReqParams *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_EXTSCAN_STOP_REQ: |
| wma_stop_extscan(wma_handle, |
| (tSirExtScanStopReqParams *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_EXTSCAN_SET_BSSID_HOTLIST_REQ: |
| wma_extscan_start_hotlist_monitor(wma_handle, |
| (tSirExtScanSetBssidHotListReqParams *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_EXTSCAN_RESET_BSSID_HOTLIST_REQ: |
| wma_extscan_stop_hotlist_monitor(wma_handle, |
| (tSirExtScanResetBssidHotlistReqParams *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_EXTSCAN_SET_SIGNF_CHANGE_REQ: |
| wma_extscan_start_change_monitor(wma_handle, |
| (tSirExtScanSetSigChangeReqParams *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_EXTSCAN_RESET_SIGNF_CHANGE_REQ: |
| wma_extscan_stop_change_monitor(wma_handle, |
| (tSirExtScanResetSignificantChangeReqParams *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_EXTSCAN_GET_CACHED_RESULTS_REQ: |
| wma_extscan_get_cached_results(wma_handle, |
| (tSirExtScanGetCachedResultsReqParams *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_EXTSCAN_GET_CAPABILITIES_REQ: |
| wma_extscan_get_capabilities(wma_handle, |
| (tSirGetExtScanCapabilitiesReqParams *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SET_EPNO_LIST_REQ: |
| wma_set_epno_network_list(wma_handle, |
| (struct wifi_epno_params *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SET_PASSPOINT_LIST_REQ: |
| /* Issue reset passpoint network list first and clear |
| * the entries */ |
| wma_reset_passpoint_network_list(wma_handle, |
| (struct wifi_passpoint_req *)msg->bodyptr); |
| |
| wma_set_passpoint_network_list(wma_handle, |
| (struct wifi_passpoint_req *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_RESET_PASSPOINT_LIST_REQ: |
| wma_reset_passpoint_network_list(wma_handle, |
| (struct wifi_passpoint_req *)msg->bodyptr); |
| break; |
| case WDA_EXTSCAN_STATUS_IND: |
| wma_extscan_rsp_handler(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_EXTSCAN_OPERATION_IND: |
| wma_extscan_operations_ind_handler(wma_handle, |
| msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #endif |
| case WDA_SET_SCAN_MAC_OUI_REQ: |
| wma_scan_probe_setoui(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #ifdef WLAN_FEATURE_LINK_LAYER_STATS |
| case WDA_LINK_LAYER_STATS_CLEAR_REQ: |
| wma_process_ll_stats_clearReq(wma_handle, |
| (tpSirLLStatsClearReq)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_LINK_LAYER_STATS_SET_REQ: |
| wma_process_ll_stats_setReq(wma_handle, |
| (tpSirLLStatsSetReq)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_LINK_LAYER_STATS_GET_REQ: |
| wma_process_ll_stats_getReq(wma_handle, |
| (tpSirLLStatsGetReq)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_LINK_LAYER_STATS_SET_THRESHOLD: |
| wma_config_stats_ext_threshold(wma_handle, |
| msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #endif /* WLAN_FEATURE_LINK_LAYER_STATS */ |
| case SIR_HAL_UNIT_TEST_CMD: |
| wma_process_unit_test_cmd(wma_handle, |
| (t_wma_unit_test_cmd *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| case WDA_ROAM_OFFLOAD_SYNCH_CNF: |
| wma_process_roam_synch_complete(wma_handle, |
| (tSirSmeRoamOffloadSynchCnf *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_ROAM_OFFLOAD_SYNCH_FAIL: |
| wma_process_roam_synch_fail(wma_handle, |
| (tSirRoamOffloadSynchFail *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case SIR_HAL_ROAM_INVOKE: |
| wma_process_roam_invoke(wma_handle, |
| (t_wma_roam_invoke_cmd *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #endif |
| #ifdef WLAN_FEATURE_NAN |
| case WDA_NAN_REQUEST: |
| wma_nan_req(wma_handle, |
| (tNanRequest *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #endif |
| case SIR_HAL_SET_BASE_MACADDR_IND: |
| wma_set_base_macaddr_indicate(wma_handle, |
| (tSirMacAddr *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_LINK_STATUS_GET_REQ: |
| wma_process_link_status_req(wma_handle, |
| (tAniGetLinkStatus *)msg->bodyptr); |
| break; |
| case WDA_GET_LINK_STATUS_RSP_IND: |
| wma_link_status_rsp(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_GET_PEER_INFO_EXT_IND: |
| wma_peer_info_ext_rsp(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_GET_TEMPERATURE_REQ: |
| wma_get_temperature(wma_handle); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #ifdef DHCP_SERVER_OFFLOAD |
| case WDA_SET_DHCP_SERVER_OFFLOAD_CMD: |
| wma_process_dhcpserver_offload(wma_handle, |
| (tSirDhcpSrvOffloadInfo *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #endif /* DHCP_SERVER_OFFLOAD */ |
| #ifdef WLAN_FEATURE_GPIO_LED_FLASHING |
| case WDA_LED_FLASHING_REQ: |
| wma_set_led_flashing(wma_handle, |
| (tSirLedFlashingReq *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #endif |
| case WDA_IPA_OFFLOAD_ENABLE_DISABLE: |
| wma_ipa_offload_enable_disable(wma_handle, |
| (struct sir_ipa_offload_enable_disable *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #ifdef MDNS_OFFLOAD |
| case WDA_SET_MDNS_OFFLOAD_CMD: |
| wma_set_mdns_offload(wma_handle, |
| (tSirMDNSOffloadInfo *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SET_MDNS_FQDN_CMD: |
| wma_set_mdns_fqdn(wma_handle, |
| (tSirMDNSFqdnInfo *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SET_MDNS_RESPONSE_CMD: |
| wma_set_mdns_response(wma_handle, |
| (tSirMDNSResponseInfo *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_GET_MDNS_STATUS_CMD: |
| wma_get_mdns_status(wma_handle, (A_UINT32 *) msg->bodyptr); |
| break; |
| #endif /* MDNS_OFFLOAD */ |
| #ifdef SAP_AUTH_OFFLOAD |
| case WDA_SET_SAP_AUTH_OFL: |
| wma_process_sap_auth_offload(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SET_CLIENT_BLOCK_INFO: |
| wma_process_client_block_info(wma_handle, msg->bodyptr); |
| if (msg->bodyptr) |
| vos_mem_free(msg->bodyptr); |
| break; |
| #endif /* SAP_AUTH_OFFLOAD */ |
| #ifdef WLAN_FEATURE_APFIND |
| case WDA_APFIND_SET_CMD: |
| wma_apfind_set_cmd(wma_handle, |
| (struct hal_apfind_request *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #endif /* WLAN_FEATURE_APFIND */ |
| case WDA_DSRC_RADIO_CHAN_STATS_REQ: |
| wma_process_radio_chan_stats_req(wma_handle, |
| (struct radio_chan_stats_req *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_OCB_SET_CONFIG_CMD: |
| wma_ocb_set_config_req(wma_handle, |
| (struct sir_ocb_config *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_OCB_SET_UTC_TIME_CMD: |
| wma_ocb_set_utc_time(wma_handle, |
| (struct sir_ocb_utc *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_OCB_START_TIMING_ADVERT_CMD: |
| wma_ocb_start_timing_advert(wma_handle, |
| (struct sir_ocb_timing_advert *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_OCB_STOP_TIMING_ADVERT_CMD: |
| wma_ocb_stop_timing_advert(wma_handle, |
| (struct sir_ocb_timing_advert *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_DCC_CLEAR_STATS_CMD: |
| wma_dcc_clear_stats(wma_handle, |
| (struct sir_dcc_clear_stats *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_OCB_GET_TSF_TIMER_CMD: |
| wma_ocb_get_tsf_timer(wma_handle, |
| (struct sir_ocb_get_tsf_timer *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_DCC_GET_STATS_CMD: |
| wma_dcc_get_stats(wma_handle, |
| (struct sir_dcc_get_stats *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_DCC_UPDATE_NDL_CMD: |
| wma_dcc_update_ndl(wma_handle, |
| (struct sir_dcc_update_ndl *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| #ifdef FEATURE_RUNTIME_PM |
| case WDA_RUNTIME_PM_SUSPEND_IND: |
| wma_suspend_req(wma_handle, NULL); |
| break; |
| case WDA_RUNTIME_PM_RESUME_IND: |
| wma_resume_req(wma_handle, true); |
| break; |
| #endif |
| case SIR_HAL_SET_MAS: |
| wma_process_set_mas(wma_handle, |
| (u_int32_t *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case SIR_HAL_SET_MIRACAST: |
| wma_process_set_miracast(wma_handle, |
| (u_int32_t *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_GET_FW_STATUS_REQ: |
| wma_send_echo_request(wma_handle); |
| break; |
| case WDA_BTC_BT_WLAN_INTERVAL_CMD: |
| wma_btc_set_bt_wlan_interval(wma_handle, |
| (WMI_COEX_CONFIG_CMD_fixed_param *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case SIR_HAL_CONFIG_STATS_FACTOR: |
| wma_config_stats_factor(wma_handle, |
| (struct sir_stats_avg_factor *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case SIR_HAL_CONFIG_GUARD_TIME: |
| wma_config_guard_time(wma_handle, |
| (struct sir_guard_time_request *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case SIR_HAL_START_STOP_LOGGING: |
| wma_set_wifi_start_packet_stats(wma_handle, |
| (struct sir_wifi_start_log *)msg->bodyptr); |
| wma_enable_specific_fw_logs(wma_handle, |
| (struct sir_wifi_start_log *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_TSF_GPIO_PIN: |
| wma_set_tsf_gpio_pin(wma_handle, msg->bodyval); |
| break; |
| case SIR_HAL_FLUSH_LOG_TO_FW: |
| wma_send_flush_logs_to_fw(wma_handle); |
| /* Body ptr is NULL here */ |
| break; |
| case WDA_SET_IE_INFO: |
| wma_process_set_ie_info(wma_handle, |
| (struct vdev_ie_info *) msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SET_RSSI_MONITOR_REQ: |
| wma_set_rssi_monitoring(wma_handle, |
| (struct rssi_monitor_req *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SET_UDP_RESP_OFFLOAD: |
| wma_send_udp_resp_offload_cmd(wma_handle, |
| (struct udp_resp_offload *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SET_WOW_PULSE_CMD: |
| wma_send_wow_pulse_cmd(wma_handle, |
| (struct wow_pulse_mode *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SET_WAKEUP_GPIO_CMD: |
| wma_send_wakeup_gpio_cmd(wma_handle, |
| (struct wakeup_gpio_mode *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_UPDATE_WEP_DEFAULT_KEY: |
| wma_update_wep_default_key(wma_handle, |
| (struct wep_update_default_key_idx *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SET_EGAP_CONF_PARAMS: |
| wma_send_egap_conf_params(wma_handle, |
| (struct egap_conf_params *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SET_CTS2SELF_FOR_STA: |
| wma_set_cts2self_for_p2p_go(wma_handle, true); |
| break; |
| case WDA_BPF_GET_CAPABILITIES_REQ: |
| wma_get_bpf_capabilities(wma_handle); |
| break; |
| case WDA_BPF_SET_INSTRUCTIONS_REQ: |
| wma_set_bpf_instructions(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SET_MIB_STATS_ENABLE: |
| wma_set_mib_stats_enable(wma_handle, true); |
| break; |
| case WDA_SET_MIB_STATS_DISABLE: |
| wma_set_mib_stats_enable(wma_handle, false); |
| break; |
| case WDA_UPDATE_TX_RATE: |
| wma_update_tx_rate(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_ADD_BCN_FILTER_CMDID: |
| wma_set_beacon_filter(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_REMOVE_BCN_FILTER_CMDID: |
| wma_remove_beacon_filter(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_SEND_FREQ_RANGE_CONTROL_IND: |
| wma_enable_disable_caevent_ind(wma_handle, |
| msg->bodyval); |
| break; |
| case SIR_HAL_NDP_INITIATOR_REQ: |
| wma_handle_ndp_initiator_req(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case SIR_HAL_NDP_RESPONDER_REQ: |
| wma_handle_ndp_responder_req(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case SIR_HAL_NDP_END_REQ: |
| wma_handle_ndp_end_req(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case SIR_HAL_SET_ALLOWED_ACTION_FRAMES: |
| wma_process_set_allowed_action_frames_ind(wma_handle, |
| msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_UPDATE_TX_FAIL_CNT_TH: |
| wma_update_tx_fail_cnt_th(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_UPDATE_LONG_RETRY_LIMIT_CNT: |
| wma_update_long_retry_limit(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_UPDATE_SHORT_RETRY_LIMIT_CNT: |
| wma_update_short_retry_limit(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_UPDATE_STA_INACTIVITY_TIMEOUT: |
| wma_update_sta_inactivity_timeout(wma_handle, |
| msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case SIR_HAL_GET_CHAIN_RSSI_REQ: |
| wma_get_chain_rssi(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case SIR_HAL_SET_REORDER_TIMEOUT_CMDID: |
| wma_set_rx_reorder_timeout_val(wma_handle, |
| msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case SIR_HAL_SET_RX_BLOCKSIZE_CMDID: |
| wma_set_rx_blocksize(wma_handle, msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case SIR_HAL_POWER_DEBUG_STATS_REQ: |
| wma_process_power_debug_stats_req(wma_handle); |
| break; |
| case WDA_ACTION_FRAME_RANDOM_MAC: |
| wma_process_action_frame_random_mac(wma_handle, |
| (struct action_frame_random_filter *)msg->bodyptr); |
| vos_mem_free(msg->bodyptr); |
| break; |
| case WDA_GET_ISOLATION: |
| wma_get_isolation(wma_handle); |
| break; |
| default: |
| WMA_LOGD("unknow msg type %x", msg->type); |
| /* Do Nothing? MSG Body should be freed at here */ |
| if(NULL != msg->bodyptr) { |
| vos_mem_free(msg->bodyptr); |
| } |
| } |
| end: |
| return vos_status ; |
| } |
| |
| static int wma_scan_event_callback(WMA_HANDLE handle, u_int8_t *data, |
| u_int32_t len) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| WMI_SCAN_EVENTID_param_tlvs *param_buf = NULL; |
| wmi_scan_event_fixed_param *wmi_event = NULL; |
| tSirScanOffloadEvent *scan_event; |
| u_int8_t vdev_id; |
| v_U32_t scan_id; |
| u_int8_t *buf; |
| vos_msg_t vos_msg = {0}; |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| |
| param_buf = (WMI_SCAN_EVENTID_param_tlvs *) data; |
| wmi_event = param_buf->fixed_param; |
| vdev_id = wmi_event->vdev_id; |
| if (wmi_event->vdev_id >= wma_handle->max_bssid) { |
| WMA_LOGE("Invalid vdev id from firmware"); |
| return -EINVAL; |
| } |
| scan_id = wma_handle->interfaces[vdev_id].scan_info.scan_id; |
| |
| adf_os_spin_lock_bh(&wma_handle->roam_preauth_lock); |
| if (wma_handle->roam_preauth_scan_id == wmi_event->scan_id) { |
| /* This is the scan requested by roam preauth set_channel operation */ |
| adf_os_spin_unlock_bh(&wma_handle->roam_preauth_lock); |
| |
| if (wmi_event->event & WMI_SCAN_FINISH_EVENTS) { |
| WMA_LOGD(" roam scan complete - scan_id %x, vdev_id %x", |
| wmi_event->scan_id, vdev_id); |
| wma_reset_scan_info(wma_handle, vdev_id); |
| } |
| |
| buf = vos_mem_malloc(sizeof(wmi_scan_event_fixed_param)); |
| if (!buf) { |
| WMA_LOGE("%s: Memory alloc failed for roam preauth ind", |
| __func__); |
| return -ENOMEM; |
| } |
| vos_mem_zero(buf, sizeof(wmi_scan_event_fixed_param)); |
| vos_mem_copy(buf, (u_int8_t *)wmi_event, |
| sizeof(wmi_scan_event_fixed_param)); |
| |
| vos_msg.type = WDA_ROAM_PREAUTH_IND; |
| vos_msg.bodyptr = buf; |
| vos_msg.bodyval = 0; |
| |
| if (VOS_STATUS_SUCCESS != |
| vos_mq_post_message(VOS_MQ_ID_WDA, &vos_msg)) { |
| WMA_LOGE("%s: Failed to post WDA_ROAM_PREAUTH_IND msg", |
| __func__); |
| vos_mem_free(buf); |
| return -1; |
| } |
| WMA_LOGD("%s: WDA_ROAM_PREAUTH_IND posted", __func__); |
| return 0; |
| } |
| adf_os_spin_unlock_bh(&wma_handle->roam_preauth_lock); |
| |
| scan_event = (tSirScanOffloadEvent *) vos_mem_malloc |
| (sizeof(tSirScanOffloadEvent)); |
| if (!scan_event) { |
| WMA_LOGE("Memory allocation failed for tSirScanOffloadEvent"); |
| return -ENOMEM; |
| } |
| |
| scan_event->event = wmi_event->event; |
| |
| WMA_LOGI("WMA <-- wmi_scan_event : event %u, scan_id %u, " |
| "freq %u, reason %u", |
| wmi_event->event, wmi_event->scan_id, |
| wmi_event->channel_freq, wmi_event->reason); |
| |
| scan_event->scanId = wmi_event->scan_id; |
| scan_event->chanFreq = wmi_event->channel_freq; |
| scan_event->p2pScanType = |
| wma_handle->interfaces[vdev_id].scan_info.p2p_scan_type; |
| scan_event->sessionId = vdev_id; |
| |
| if (wmi_event->reason == WMI_SCAN_REASON_COMPLETED || |
| wmi_event->reason == WMI_SCAN_REASON_TIMEDOUT) |
| scan_event->reasonCode = eSIR_SME_SUCCESS; |
| else |
| scan_event->reasonCode = eSIR_SME_SCAN_FAILED; |
| |
| switch (wmi_event->event) { |
| case WMI_SCAN_EVENT_COMPLETED: |
| case WMI_SCAN_EVENT_DEQUEUED: |
| /* |
| * return success always so that SME can pick whatever scan |
| * results is available in scan cache(due to partial or |
| * aborted scan) |
| */ |
| scan_event->event = WMI_SCAN_EVENT_COMPLETED; |
| scan_event->reasonCode = eSIR_SME_SUCCESS; |
| break; |
| case WMI_SCAN_EVENT_START_FAILED: |
| scan_event->event = WMI_SCAN_EVENT_COMPLETED; |
| scan_event->reasonCode = eSIR_SME_SCAN_FAILED; |
| break; |
| case WMI_SCAN_EVENT_PREEMPTED: |
| WMA_LOGW("%s: Unhandled Scan Event WMI_SCAN_EVENT_PREEMPTED", __func__); |
| break; |
| case WMI_SCAN_EVENT_RESTARTED: |
| WMA_LOGW("%s: Unhandled Scan Event WMI_SCAN_EVENT_RESTARTED", __func__); |
| break; |
| } |
| |
| /* Stop the scan completion timeout if the event is WMI_SCAN_EVENT_COMPLETED */ |
| if (scan_event->event == |
| (enum sir_scan_event_type) WMI_SCAN_EVENT_COMPLETED) { |
| WMA_LOGD(" scan complete - scan_id %x, vdev_id %x", |
| wmi_event->scan_id, vdev_id); |
| /* |
| * first stop the timer then reset scan info, else there is a |
| * race condition between, timeout handler in host and reset |
| * operation here. because of that, sometime timeout handler |
| * triggers and scan ID mismatch messages is printed. |
| */ |
| vos_status = vos_timer_stop(&wma_handle->wma_scan_comp_timer); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to stop the scan completion timeout"); |
| vos_mem_free(scan_event); |
| return -EPERM; |
| } |
| if (wmi_event->scan_id == scan_id) |
| wma_reset_scan_info(wma_handle, vdev_id); |
| else |
| WMA_LOGE("Scan id not matched for SCAN COMPLETE event"); |
| } |
| |
| wma_send_msg(wma_handle, WDA_RX_SCAN_EVENT, (void *) scan_event, 0) ; |
| return 0; |
| } |
| |
| static void wma_mgmt_tx_ack_work_handler(struct work_struct *ack_work) |
| { |
| struct wma_tx_ack_work_ctx *work; |
| tp_wma_handle wma_handle; |
| pWDAAckFnTxComp ack_cb; |
| |
| if (vos_is_load_unload_in_progress(VOS_MODULE_ID_WDA, NULL)) { |
| WMA_LOGE("%s: Driver load/unload in progress", __func__); |
| return; |
| } |
| |
| work = container_of(ack_work, struct wma_tx_ack_work_ctx, ack_cmp_work); |
| wma_handle = work->wma_handle; |
| ack_cb = wma_handle->umac_ota_ack_cb[work->sub_type]; |
| |
| WMA_LOGD("Tx Ack Cb SubType %d Status %d", |
| work->sub_type, work->status); |
| |
| /* Call the Ack Cb registered by UMAC */ |
| ack_cb((tpAniSirGlobal)(wma_handle->mac_context), |
| work->status ? 0 : 1); |
| |
| adf_os_mem_free(work); |
| wma_handle->ack_work_ctx = NULL; |
| } |
| |
| /* function : wma_mgmt_tx_comp_conf_ind |
| * Description : Post mgmt tx complete indication to PE. |
| * Args : |
| wma_handle : Pointer to WMA handle |
| * sub_type : Tx mgmt frame sub type |
| * status : Mgmt frame tx status |
| * Returns : |
| */ |
| static void |
| wma_mgmt_tx_comp_conf_ind(tp_wma_handle wma_handle, u_int8_t sub_type, |
| int32_t status) |
| { |
| int32_t tx_comp_status; |
| |
| tx_comp_status = status ? 0 : 1; |
| if(sub_type == SIR_MAC_MGMT_DISASSOC) { |
| wma_send_msg(wma_handle, WDA_DISASSOC_TX_COMP, NULL, tx_comp_status); |
| } |
| else if(sub_type == SIR_MAC_MGMT_DEAUTH) { |
| wma_send_msg(wma_handle, WDA_DEAUTH_TX_COMP, NULL, tx_comp_status); |
| } |
| } |
| |
| /** |
| * wma_mgmt_tx_ack_comp_hdlr - handles tx ack mgmt completion |
| * @context: context with which the handler is registered |
| * @netbuf: tx mgmt nbuf |
| * @err: status of tx completion |
| * |
| * This is the cb registered with TxRx for |
| * Ack Complete |
| */ |
| static void |
| wma_mgmt_tx_ack_comp_hdlr(void *wma_context, |
| adf_nbuf_t netbuf, int32_t status) |
| { |
| tpSirMacFrameCtl pFc = |
| (tpSirMacFrameCtl)(adf_nbuf_data(netbuf)); |
| tp_wma_handle wma_handle = (tp_wma_handle)wma_context; |
| |
| if(wma_handle && wma_handle->umac_ota_ack_cb[pFc->subType]) { |
| if((pFc->subType == SIR_MAC_MGMT_DISASSOC) || |
| (pFc->subType == SIR_MAC_MGMT_DEAUTH)) { |
| wma_mgmt_tx_comp_conf_ind(wma_handle, (u_int8_t)pFc->subType, |
| status); |
| } |
| else { |
| struct wma_tx_ack_work_ctx *ack_work; |
| |
| ack_work = |
| adf_os_mem_alloc(NULL, sizeof(struct wma_tx_ack_work_ctx)); |
| |
| if(ack_work) { |
| vos_init_work(&ack_work->ack_cmp_work, |
| wma_mgmt_tx_ack_work_handler); |
| ack_work->wma_handle = wma_handle; |
| ack_work->sub_type = pFc->subType; |
| ack_work->status = status; |
| |
| /* Schedue the Work */ |
| schedule_work(&ack_work->ack_cmp_work); |
| } |
| } |
| } |
| } |
| |
| /** |
| * wma_mgmt_tx_dload_comp_hldr - handles tx mgmt completion |
| * @context: context with which the handler is registered |
| * @netbuf: tx mgmt nbuf |
| * @err: status of tx completion |
| */ |
| static void |
| wma_mgmt_tx_dload_comp_hldr(void *wma_context, adf_nbuf_t netbuf, |
| int32_t status) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| |
| tp_wma_handle wma_handle = (tp_wma_handle)wma_context; |
| void *mac_context = wma_handle->mac_context; |
| |
| WMA_LOGD("Tx Complete Status %d", status); |
| |
| if (!wma_handle->tx_frm_download_comp_cb) { |
| WMA_LOGE("Tx Complete Cb not registered by umac"); |
| return; |
| } |
| |
| /* Call Tx Mgmt Complete Callback registered by umac */ |
| wma_handle->tx_frm_download_comp_cb(mac_context, |
| netbuf, 0); |
| |
| /* Reset Callback */ |
| wma_handle->tx_frm_download_comp_cb = NULL; |
| |
| /* Set the Tx Mgmt Complete Event */ |
| vos_status = vos_event_set( |
| &wma_handle->tx_frm_download_comp_event); |
| if (!VOS_IS_STATUS_SUCCESS(vos_status)) |
| WMA_LOGP("%s: Event Set failed - tx_frm_comp_event", __func__); |
| } |
| |
| /** |
| * wma_tx_attach - attaches tx fn with underlying layer |
| * @pwmaCtx: wma context |
| */ |
| VOS_STATUS wma_tx_attach(tp_wma_handle wma_handle) |
| { |
| /* Get the Vos Context */ |
| pVosContextType vos_handle = |
| (pVosContextType)(wma_handle->vos_context); |
| |
| /* Get the txRx Pdev handle */ |
| ol_txrx_pdev_handle txrx_pdev = |
| (ol_txrx_pdev_handle)(vos_handle->pdev_txrx_ctx); |
| |
| /* Register for Tx Management Frames */ |
| wdi_in_mgmt_tx_cb_set(txrx_pdev, GENERIC_NODOWLOAD_ACK_COMP_INDEX, |
| NULL, wma_mgmt_tx_ack_comp_hdlr,wma_handle); |
| |
| wdi_in_mgmt_tx_cb_set(txrx_pdev, GENERIC_DOWNLD_COMP_NOACK_COMP_INDEX, |
| wma_mgmt_tx_dload_comp_hldr, NULL, wma_handle); |
| |
| wdi_in_mgmt_tx_cb_set(txrx_pdev, GENERIC_DOWNLD_COMP_ACK_COMP_INDEX, |
| wma_mgmt_tx_dload_comp_hldr, |
| wma_mgmt_tx_ack_comp_hdlr,wma_handle); |
| |
| /* Store the Mac Context */ |
| wma_handle->mac_context = vos_handle->pMACContext; |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_tx_detach - detaches mgmt fn with underlying layer |
| * Deregister with TxRx for Tx Mgmt Download and Ack completion. |
| * @tp_wma_handle: wma context |
| */ |
| static VOS_STATUS wma_tx_detach(tp_wma_handle wma_handle) |
| { |
| u_int32_t frame_index = 0; |
| |
| /* Get the Vos Context */ |
| pVosContextType vos_handle = |
| (pVosContextType)(wma_handle->vos_context); |
| |
| /* Get the txRx Pdev handle */ |
| ol_txrx_pdev_handle txrx_pdev = |
| (ol_txrx_pdev_handle)(vos_handle->pdev_txrx_ctx); |
| |
| if (txrx_pdev) { |
| /* Deregister with TxRx for Tx Mgmt completion call back */ |
| for (frame_index = 0; frame_index < FRAME_INDEX_MAX; |
| frame_index++) { |
| wdi_in_mgmt_tx_cb_set(txrx_pdev, frame_index, NULL, NULL, |
| txrx_pdev); |
| } |
| } |
| /* Tx queue empty check event (dummy event) */ |
| vos_event_destroy(&wma_handle->tx_queue_empty_event); |
| |
| /* Reset Tx Frm Callbacks */ |
| wma_handle->tx_frm_download_comp_cb = NULL; |
| |
| /* Reset Tx Data Frame Ack Cb */ |
| wma_handle->umac_data_ota_ack_cb = NULL; |
| |
| /* Reset last Tx Data Frame nbuf ptr */ |
| wma_handle->last_umac_data_nbuf = NULL; |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| static void wma_roam_ho_fail_handler(tp_wma_handle wma, u_int32_t vdev_id) |
| { |
| tSirSmeHOFailureInd *ho_failure_ind; |
| vos_msg_t sme_msg = {0}; |
| VOS_STATUS vos_status; |
| |
| ho_failure_ind = vos_mem_malloc(sizeof(tSirSmeHOFailureInd)); |
| |
| if (NULL == ho_failure_ind) { |
| WMA_LOGE("%s: Memory allocation failure", __func__); |
| return; |
| } |
| ho_failure_ind->sessionId = vdev_id; |
| sme_msg.type = eWNI_SME_HO_FAIL_IND; |
| sme_msg.bodyptr = ho_failure_ind; |
| sme_msg.bodyval = 0; |
| |
| vos_status = vos_mq_post_message(VOS_MODULE_ID_SME, &sme_msg); |
| if (!VOS_IS_STATUS_SUCCESS(vos_status)) { |
| WMA_LOGE("Fail to post eWNI_SME_HO_FAIL_IND msg to SME"); |
| vos_mem_free(ho_failure_ind); |
| return; |
| } |
| return; |
| } |
| #endif |
| |
| /* function : wma_roam_better_ap_handler |
| * Description : Handler for WMI_ROAM_REASON_BETTER_AP event from roam firmware in Rome. |
| * : This event means roam algorithm in Rome has found a better matching |
| * : candidate AP. The indication is sent through tl_shim as by repeating |
| * : the last beacon. Hence this routine calls a tlshim routine. |
| * Args : |
| * Returns : |
| */ |
| static void wma_roam_better_ap_handler(tp_wma_handle wma, u_int32_t vdev_id) |
| { |
| VOS_STATUS ret; |
| /* abort existing scans from GUI, but not roaming preauth scan */ |
| if (wma->interfaces[vdev_id].scan_info.scan_id != 0 && |
| (wma->interfaces[vdev_id].scan_info.scan_id & |
| WMA_HOST_ROAM_SCAN_REQID_PREFIX) != |
| WMA_HOST_ROAM_SCAN_REQID_PREFIX) { |
| tAbortScanParams abortScan; |
| abortScan.SessionId = vdev_id; |
| wma_stop_scan(wma, &abortScan); |
| } |
| ret = tlshim_mgmt_roam_event_ind(wma->vos_context, vdev_id); |
| } |
| |
| /* function : wma_roam_event_callback |
| * Description : Handler for all events from roam engine in firmware |
| * Args : |
| * Returns : |
| */ |
| |
| static int wma_roam_event_callback(WMA_HANDLE handle, u_int8_t *event_buf, |
| u_int32_t len) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| WMI_ROAM_EVENTID_param_tlvs *param_buf; |
| wmi_roam_event_fixed_param *wmi_event; |
| |
| param_buf = (WMI_ROAM_EVENTID_param_tlvs *) event_buf; |
| if (!param_buf) { |
| WMA_LOGE("Invalid roam event buffer"); |
| return -EINVAL; |
| } |
| |
| wmi_event = param_buf->fixed_param; |
| WMA_LOGD("%s: Reason %x for vdevid %x, rssi %d", |
| __func__, wmi_event->reason, wmi_event->vdev_id, wmi_event->rssi); |
| |
| if (wmi_event->vdev_id >= wma_handle->max_bssid) { |
| WMA_LOGE("Invalid vdev id from firmware"); |
| return -EINVAL; |
| } |
| |
| DPTRACE(adf_dp_trace_record_event(ADF_DP_TRACE_EVENT_RECORD, |
| wmi_event->vdev_id, ADF_PROTO_TYPE_EVENT, ADF_ROAM_EVENTID)); |
| |
| switch(wmi_event->reason) { |
| case WMI_ROAM_REASON_BMISS: |
| WMA_LOGD("Beacon Miss for vdevid %x", |
| wmi_event->vdev_id); |
| wma_beacon_miss_handler(wma_handle, wmi_event->vdev_id, |
| wmi_event->rssi); |
| break; |
| case WMI_ROAM_REASON_BETTER_AP: |
| WMA_LOGD("%s:Better AP found for vdevid %x, rssi %d", __func__, |
| wmi_event->vdev_id, wmi_event->rssi); |
| wma_handle->suitable_ap_hb_failure = FALSE; |
| wma_roam_better_ap_handler(wma_handle, wmi_event->vdev_id); |
| break; |
| case WMI_ROAM_REASON_SUITABLE_AP: |
| wma_handle->suitable_ap_hb_failure = TRUE; |
| wma_handle->suitable_ap_hb_failure_rssi = wmi_event->rssi; |
| WMA_LOGD("%s:Bmiss scan AP found for vdevid %x, rssi %d", __func__, |
| wmi_event->vdev_id, wmi_event->rssi); |
| wma_roam_better_ap_handler(wma_handle, wmi_event->vdev_id); |
| break; |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| case WMI_ROAM_REASON_HO_FAILED: |
| WMA_LOGE("LFR3:Hand-Off Failed for vdevid %x", |
| wmi_event->vdev_id); |
| wma_roam_ho_fail_handler(wma_handle, wmi_event->vdev_id); |
| break; |
| #endif |
| default: |
| WMA_LOGD("%s:Unhandled Roam Event %x for vdevid %x", __func__, |
| wmi_event->reason, wmi_event->vdev_id); |
| break; |
| } |
| return 0; |
| } |
| |
| /** |
| * wma_smps_force_mode_callback() - SMPS force command event |
| * handler |
| * @handle: WMA handle |
| * @event_buf: event buffer |
| * @len: length of event data |
| * |
| * Return: 0 for success non-zero for failure |
| */ |
| static int wma_smps_force_mode_callback(WMA_HANDLE handle, |
| uint8_t *event_buf, |
| uint32_t len) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| WMI_STA_SMPS_FORCE_MODE_COMPLETE_EVENTID_param_tlvs *param_buf; |
| wmi_sta_smps_force_mode_complete_event_fixed_param *wmi_event; |
| struct sir_smps_force_mode_event *smps_ind; |
| |
| param_buf = |
| (WMI_STA_SMPS_FORCE_MODE_COMPLETE_EVENTID_param_tlvs *) |
| event_buf; |
| if (!param_buf) { |
| WMA_LOGE("Invalid smps force mode event buffer"); |
| return -EINVAL; |
| } |
| |
| wmi_event = param_buf->fixed_param; |
| WMA_LOGD("%s: vdev id %x status %x", |
| __func__, wmi_event->vdev_id, wmi_event->status); |
| |
| smps_ind = vos_mem_malloc(sizeof(*smps_ind)); |
| |
| if (NULL == smps_ind) { |
| WMA_LOGE("%s: memory alloc failed for SMPS force mode event", |
| __func__); |
| return -ENOMEM; |
| } |
| smps_ind->message_type = WDA_SMPS_FORCE_MODE_IND; |
| smps_ind->length = sizeof(struct sir_smps_force_mode_event); |
| smps_ind->vdev_id = wmi_event->vdev_id; |
| smps_ind->status = wmi_event->status; |
| |
| wma_send_msg(wma_handle, WDA_SMPS_FORCE_MODE_IND, smps_ind, 0); |
| |
| return 0; |
| } |
| |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| |
| /* Record NLO match event comes from FW. It's a indication that |
| * one of the profile is matched. |
| */ |
| static int wma_nlo_match_evt_handler(void *handle, u_int8_t *event, |
| u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| wmi_nlo_event *nlo_event; |
| WMI_NLO_MATCH_EVENTID_param_tlvs *param_buf = |
| (WMI_NLO_MATCH_EVENTID_param_tlvs *) event; |
| struct wma_txrx_node *node; |
| |
| if (!param_buf) { |
| WMA_LOGE("Invalid NLO match event buffer"); |
| return -EINVAL; |
| } |
| |
| nlo_event = param_buf->fixed_param; |
| WMA_LOGD("PNO match event received for vdev %d", |
| nlo_event->vdev_id); |
| if (nlo_event->vdev_id >= wma->max_bssid) { |
| WMA_LOGE("Invalid vdev id in the NLO event %d", |
| nlo_event->vdev_id); |
| return -EINVAL; |
| } |
| |
| node = &wma->interfaces[nlo_event->vdev_id]; |
| if (node) |
| node->nlo_match_evt_received = TRUE; |
| |
| vos_wake_lock_timeout_acquire(&wma->pno_wake_lock, |
| WMA_PNO_MATCH_WAKE_LOCK_TIMEOUT, |
| WIFI_POWER_EVENT_WAKELOCK_PNO); |
| |
| return 0; |
| } |
| |
| /* Handles NLO scan completion event. */ |
| static int wma_nlo_scan_cmp_evt_handler(void *handle, u_int8_t *event, |
| u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| wmi_nlo_event *nlo_event; |
| WMI_NLO_SCAN_COMPLETE_EVENTID_param_tlvs *param_buf = |
| (WMI_NLO_SCAN_COMPLETE_EVENTID_param_tlvs *) event; |
| tSirScanOffloadEvent *scan_event; |
| struct wma_txrx_node *node; |
| |
| if (!param_buf) { |
| WMA_LOGE("Invalid NLO scan comp event buffer"); |
| return -EINVAL; |
| } |
| |
| nlo_event = param_buf->fixed_param; |
| WMA_LOGD("PNO scan completion event received for vdev %d", |
| nlo_event->vdev_id); |
| |
| node = &wma->interfaces[nlo_event->vdev_id]; |
| |
| /* Handle scan completion event only after NLO match event. */ |
| if (!node || !node->nlo_match_evt_received) { |
| |
| WMA_LOGD("NLO match not received skipping PNO complete ind for vdev %d", |
| nlo_event->vdev_id); |
| goto skip_pno_cmp_ind; |
| } |
| vos_wake_lock_release(&wma->pno_wake_lock, |
| WIFI_POWER_EVENT_WAKELOCK_PNO); |
| |
| scan_event = (tSirScanOffloadEvent *) vos_mem_malloc( |
| sizeof(tSirScanOffloadEvent)); |
| if (scan_event) { |
| /* Posting scan completion msg would take scan cache result |
| * from LIM module and update in scan cache maintained in SME.*/ |
| WMA_LOGD("Posting Scan completion to umac"); |
| vos_wake_lock_timeout_acquire(&wma->pno_wake_lock, |
| WMA_PNO_SCAN_COMPLETE_WAKE_LOCK_TIMEOUT, |
| WIFI_POWER_EVENT_WAKELOCK_PNO); |
| vos_mem_zero(scan_event, sizeof(tSirScanOffloadEvent)); |
| scan_event->reasonCode = eSIR_SME_SUCCESS; |
| scan_event->event = SIR_SCAN_EVENT_COMPLETED; |
| scan_event->sessionId = nlo_event->vdev_id; |
| wma_send_msg(wma, WDA_RX_SCAN_EVENT, |
| (void *) scan_event, 0); |
| } else { |
| WMA_LOGE("Memory allocation failed for tSirScanOffloadEvent"); |
| } |
| |
| skip_pno_cmp_ind: |
| return 0; |
| } |
| |
| #endif |
| #ifdef WLAN_FEATURE_APFIND |
| /* Record APFIND event comes from FW. |
| */ |
| static int wma_apfind_evt_handler(void *handle, u_int8_t *event, |
| u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| wmi_apfind_event_hdr *apfind_event_hdr; |
| WMI_APFIND_EVENTID_param_tlvs *param_buf = |
| (WMI_APFIND_EVENTID_param_tlvs *) event; |
| u_int8_t *buf; |
| u_int8_t ssid_tmp[WMI_MAX_SSID_LEN + 1]; |
| u_int8_t *mac; |
| u_int32_t vdev_id; |
| |
| if (!param_buf) { |
| WMA_LOGE("Invalid APFIND event buffer"); |
| return -EINVAL; |
| } |
| |
| apfind_event_hdr = param_buf->hdr; |
| WMA_LOGD("APFIND event received, id=%d, data_length=%d", |
| apfind_event_hdr->event_type, apfind_event_hdr->data_len); |
| buf = param_buf->data; |
| A_MEMZERO(ssid_tmp, sizeof(ssid_tmp)); |
| A_MEMCPY(ssid_tmp, buf, WMI_MAX_SSID_LEN); |
| /* SSID param len is WMI_MAX_SSID_LEN, without '+1' */ |
| WMA_LOGD("%s, APFIND match, dump ssid=%s", __func__, ssid_tmp); |
| |
| buf = ¶m_buf->data[WMI_MAX_SSID_LEN]; |
| mac = buf; |
| WMA_LOGD("%s, APFIND dump mac=0x%08X-0x%08X", |
| __func__, *(u_int32_t *)buf, *(u_int32_t *)(buf + sizeof(u_int32_t))); |
| |
| if (apfind_event_hdr->data_len >= |
| (WMI_MAX_SSID_LEN + IEEE80211_ADDR_LEN + sizeof(vdev_id) |
| + sizeof(apfind_event_hdr->tlv_header))) { |
| /* FW had the tlv_header len calculated into the data_len */ |
| buf = ¶m_buf->data[WMI_MAX_SSID_LEN + IEEE80211_ADDR_LEN]; |
| vdev_id = *(u_int32_t*) buf; |
| |
| /* to trigger AP re-connection after QRF wakeup*/ |
| WMA_LOGA("%s, trigger AP re-connection at QRF wakeup (APFIND_WAKEUP_EVENT), vdev_id=%d, SSID=%s", |
| __func__, vdev_id, ssid_tmp); |
| wma_beacon_miss_handler(wma, vdev_id, 0); |
| } else { |
| WMA_LOGD("%s, old version FW (no vdev_id).", __func__); |
| } |
| |
| return 0; |
| } |
| #endif /* WLAN_FEATURE_APFIND */ |
| #if defined(CONFIG_HL_SUPPORT) || defined(QCA_SUPPORT_TXRX_VDEV_PAUSE_LL) |
| /* Handle TX pause event from FW */ |
| static int wma_mcc_vdev_tx_pause_evt_handler(void *handle, u_int8_t *event, |
| u_int32_t len) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_TX_PAUSE_EVENTID_param_tlvs *param_buf; |
| wmi_tx_pause_event_fixed_param *wmi_event; |
| u_int8_t vdev_id; |
| A_UINT32 vdev_map; |
| |
| param_buf = (WMI_TX_PAUSE_EVENTID_param_tlvs *) event; |
| if (!param_buf) |
| { |
| WMA_LOGE("Invalid roam event buffer"); |
| return -EINVAL; |
| } |
| |
| if (wma_get_wow_bus_suspend(wma)) { |
| WMA_LOGD(" Suspend is in progress: Pause/Unpause Tx is NoOp"); |
| return 0; |
| } |
| |
| wmi_event = param_buf->fixed_param; |
| vdev_map = wmi_event->vdev_map; |
| /* FW mapped vdev from ID |
| * vdev_map = (1 << vdev_id) |
| * So, host should unmap to ID */ |
| for (vdev_id = 0; vdev_map != 0 && vdev_id < wma->max_bssid; |
| vdev_id++) |
| { |
| if (!(vdev_map & 0x1)) |
| { |
| /* No Vdev */ |
| } |
| else |
| { |
| if (!wma->interfaces[vdev_id].handle) |
| { |
| WMA_LOGE("%s: invalid vdev ID %d", __func__, vdev_id); |
| /* Test Next VDEV */ |
| vdev_map >>= 1; |
| continue; |
| } |
| |
| /* PAUSE action, add bitmap */ |
| if (ACTION_PAUSE == wmi_event->action) |
| { |
| /* |
| * Now only support per-dev pause so it is not necessary |
| * to pause a paused queue again. |
| */ |
| if (!wma->interfaces[vdev_id].pause_bitmap) |
| wdi_in_vdev_pause(wma->interfaces[vdev_id].handle, |
| OL_TXQ_PAUSE_REASON_FW); |
| wma->interfaces[vdev_id].pause_bitmap |= (1 << wmi_event->pause_type); |
| } |
| /* UNPAUSE action, clean bitmap */ |
| else if (ACTION_UNPAUSE == wmi_event->action) |
| { |
| /* Handle unpause only if already paused*/ |
| if(wma->interfaces[vdev_id].pause_bitmap) |
| { |
| wma->interfaces[vdev_id].pause_bitmap &= ~(1 << wmi_event->pause_type); |
| |
| if (!wma->interfaces[vdev_id].pause_bitmap) |
| { |
| /* PAUSE BIT MAP is cleared |
| * UNPAUSE VDEV */ |
| wdi_in_vdev_unpause(wma->interfaces[vdev_id].handle, |
| OL_TXQ_PAUSE_REASON_FW); |
| } |
| } |
| } |
| else |
| { |
| WMA_LOGE("Not Valid Action Type %d", wmi_event->action); |
| } |
| |
| WMA_LOGD("vdev_id %d, pause_map 0x%x, pause type %d, action %d", |
| vdev_id, wma->interfaces[vdev_id].pause_bitmap, |
| wmi_event->pause_type, wmi_event->action); |
| } |
| /* Test Next VDEV */ |
| vdev_map >>= 1; |
| } |
| |
| return 0; |
| } |
| #endif /* QCA_SUPPORT_TXRX_VDEV_PAUSE_LL */ |
| |
| /* function : wma_set_thermal_mgmt |
| * Description : This function sends the thermal management command to the firmware |
| * Args : |
| wma_handle : Pointer to WMA handle |
| * thermal_info : Thermal command information |
| * Returns : |
| * VOS_STATUS_SUCCESS for success otherwise failure |
| */ |
| static VOS_STATUS wma_set_thermal_mgmt(tp_wma_handle wma_handle, |
| t_thermal_cmd_params thermal_info) |
| { |
| wmi_thermal_mgmt_cmd_fixed_param *cmd = NULL; |
| wmi_buf_t buf = NULL; |
| int status = 0; |
| u_int32_t len = 0; |
| |
| len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate buffer to send set key cmd"); |
| return eHAL_STATUS_FAILURE; |
| } |
| |
| cmd = (wmi_thermal_mgmt_cmd_fixed_param *) wmi_buf_data (buf); |
| |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_thermal_mgmt_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_thermal_mgmt_cmd_fixed_param)); |
| |
| cmd->lower_thresh_degreeC = thermal_info.minTemp; |
| cmd->upper_thresh_degreeC = thermal_info.maxTemp; |
| cmd->enable = thermal_info.thermalEnable; |
| |
| WMA_LOGE("TM Sending thermal mgmt cmd: low temp %d, upper temp %d, enabled %d", |
| cmd->lower_thresh_degreeC, cmd->upper_thresh_degreeC, cmd->enable); |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_THERMAL_MGMT_CMDID); |
| if (status) { |
| wmi_buf_free(buf); |
| WMA_LOGE("%s:Failed to send thermal mgmt command", __func__); |
| return eHAL_STATUS_FAILURE; |
| } |
| |
| return eHAL_STATUS_SUCCESS; |
| } |
| |
| /* function : wma_thermal_mgmt_get_level |
| * Description : This function returns the thermal(throttle) level given the temperature |
| * Args : |
| handle : Pointer to WMA handle |
| * temp : temperature |
| * Returns : |
| * thermal (throttle) level |
| */ |
| u_int8_t wma_thermal_mgmt_get_level(void *handle, u_int32_t temp) |
| { |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| int i; |
| u_int8_t level; |
| |
| level = i = wma->thermal_mgmt_info.thermalCurrLevel; |
| while (temp < wma->thermal_mgmt_info.thermalLevels[i].minTempThreshold && |
| i > 0) { |
| i--; |
| level = i; |
| } |
| |
| i = wma->thermal_mgmt_info.thermalCurrLevel; |
| while (temp > wma->thermal_mgmt_info.thermalLevels[i].maxTempThreshold && |
| i < (WLAN_WMA_MAX_THERMAL_LEVELS - 1)) { |
| i++; |
| level = i; |
| } |
| |
| WMA_LOGW("Change thermal level from %d -> %d\n", |
| wma->thermal_mgmt_info.thermalCurrLevel, level); |
| |
| return level; |
| } |
| |
| /* function : wma_thermal_mgmt_evt_handler |
| * Description : This function handles the thermal mgmt event from the firmware |
| * Args : |
| wma_handle : Pointer to WMA handle |
| * event : Thermal event information |
| * len : |
| * Returns : |
| * 0 for success otherwise failure |
| */ |
| static int wma_thermal_mgmt_evt_handler(void *handle, u_int8_t *event, |
| u_int32_t len) |
| { |
| tp_wma_handle wma; |
| wmi_thermal_mgmt_event_fixed_param *tm_event; |
| u_int8_t thermal_level; |
| t_thermal_cmd_params thermal_params; |
| WMI_THERMAL_MGMT_EVENTID_param_tlvs *param_buf; |
| ol_txrx_pdev_handle curr_pdev; |
| |
| if (NULL == event || NULL == handle) { |
| WMA_LOGE("Invalid thermal mitigation event buffer"); |
| return -EINVAL; |
| } |
| |
| wma = (tp_wma_handle) handle; |
| |
| if (NULL == wma) { |
| WMA_LOGE("%s: Failed to get wma handle", __func__); |
| return -EINVAL; |
| } |
| |
| param_buf = (WMI_THERMAL_MGMT_EVENTID_param_tlvs *) event; |
| |
| curr_pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| if (NULL == curr_pdev) { |
| WMA_LOGE("%s: Failed to get pdev", __func__); |
| return -EINVAL; |
| } |
| |
| /* Check if thermal mitigation is enabled */ |
| if (!wma->thermal_mgmt_info.thermalMgmtEnabled){ |
| WMA_LOGE("Thermal mgmt is not enabled, ignoring event"); |
| return -EINVAL; |
| } |
| |
| tm_event = param_buf->fixed_param; |
| WMA_LOGD("Thermal mgmt event received with temperature %d", |
| tm_event->temperature_degreeC); |
| |
| /* Get the thermal mitigation level for the reported temperature*/ |
| thermal_level = wma_thermal_mgmt_get_level(handle, tm_event->temperature_degreeC); |
| WMA_LOGD("Thermal mgmt level %d", thermal_level); |
| |
| if (thermal_level == wma->thermal_mgmt_info.thermalCurrLevel) { |
| WMA_LOGD("Current level %d is same as the set level, ignoring", |
| wma->thermal_mgmt_info.thermalCurrLevel); |
| return 0; |
| } |
| |
| wma->thermal_mgmt_info.thermalCurrLevel = thermal_level; |
| |
| /* Inform txrx */ |
| ol_tx_throttle_set_level(curr_pdev, thermal_level); |
| |
| /* Send SME SET_THERMAL_LEVEL_IND message */ |
| wma_set_thermal_level_ind(thermal_level); |
| |
| /* Get the temperature thresholds to set in firmware */ |
| thermal_params.minTemp = |
| wma->thermal_mgmt_info.thermalLevels[thermal_level].minTempThreshold; |
| thermal_params.maxTemp = |
| wma->thermal_mgmt_info.thermalLevels[thermal_level].maxTempThreshold; |
| thermal_params.thermalEnable = |
| wma->thermal_mgmt_info.thermalMgmtEnabled; |
| |
| if (VOS_STATUS_SUCCESS != wma_set_thermal_mgmt(wma, thermal_params)) { |
| WMA_LOGE("Could not send thermal mgmt command to the firmware!"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef FEATURE_WLAN_CH_AVOID |
| /* Process channel to avoid event comes from FW. |
| */ |
| static int wma_channel_avoid_evt_handler(void *handle, u_int8_t *event, |
| u_int32_t len) |
| { |
| wmi_avoid_freq_ranges_event_fixed_param *afr_fixed_param; |
| wmi_avoid_freq_range_desc *afr_desc; |
| u_int32_t num_freq_ranges, freq_range_idx; |
| tSirChAvoidIndType *sca_indication; |
| VOS_STATUS vos_status; |
| vos_msg_t sme_msg = {0} ; |
| WMI_WLAN_FREQ_AVOID_EVENTID_param_tlvs *param_buf = |
| (WMI_WLAN_FREQ_AVOID_EVENTID_param_tlvs *) event; |
| |
| if (!param_buf) { |
| WMA_LOGE("Invalid channel avoid event buffer"); |
| return -EINVAL; |
| } |
| |
| afr_fixed_param = param_buf->fixed_param; |
| if (!afr_fixed_param) { |
| WMA_LOGE("Invalid channel avoid event fixed param buffer"); |
| return -EINVAL; |
| } |
| |
| num_freq_ranges = (afr_fixed_param->num_freq_ranges > SIR_CH_AVOID_MAX_RANGE)? |
| SIR_CH_AVOID_MAX_RANGE:afr_fixed_param->num_freq_ranges; |
| |
| WMA_LOGD("Channel avoid event received with %d ranges", num_freq_ranges); |
| for (freq_range_idx = 0; freq_range_idx < num_freq_ranges; freq_range_idx++) { |
| afr_desc = (wmi_avoid_freq_range_desc *) ((void *)param_buf->avd_freq_range |
| + freq_range_idx * sizeof(wmi_avoid_freq_range_desc)); |
| WMA_LOGD("range %d: tlv id = %u, start freq = %u, end freq = %u", |
| freq_range_idx, |
| afr_desc->tlv_header, |
| afr_desc->start_freq, |
| afr_desc->end_freq); |
| } |
| |
| sca_indication = (tSirChAvoidIndType *) |
| vos_mem_malloc(sizeof(tSirChAvoidIndType)); |
| if (!sca_indication) { |
| WMA_LOGE("Invalid channel avoid indication buffer"); |
| return -EINVAL; |
| } |
| |
| sca_indication->avoid_range_count = num_freq_ranges; |
| for (freq_range_idx = 0; freq_range_idx < num_freq_ranges; freq_range_idx++) { |
| afr_desc = (wmi_avoid_freq_range_desc *) ((void *)param_buf->avd_freq_range |
| + freq_range_idx * sizeof(wmi_avoid_freq_range_desc)); |
| sca_indication->avoid_freq_range[freq_range_idx].start_freq = |
| afr_desc->start_freq; |
| sca_indication->avoid_freq_range[freq_range_idx].end_freq = |
| afr_desc->end_freq; |
| } |
| |
| sme_msg.type = eWNI_SME_CH_AVOID_IND; |
| sme_msg.bodyptr = sca_indication; |
| sme_msg.bodyval = 0; |
| |
| vos_status = vos_mq_post_message(VOS_MODULE_ID_SME, &sme_msg); |
| if ( !VOS_IS_STATUS_SUCCESS(vos_status) ) |
| { |
| WMA_LOGE("Fail to post eWNI_SME_CH_AVOID_IND msg to SME"); |
| vos_mem_free(sca_indication); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* function : wma_process_ch_avoid_update_req |
| * Description : handles channel avoid update request |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_process_ch_avoid_update_req(tp_wma_handle wma_handle, |
| tSirChAvoidUpdateReq *ch_avoid_update_req) |
| { |
| int status = 0; |
| wmi_buf_t buf = NULL; |
| u_int8_t *buf_ptr; |
| wmi_chan_avoid_update_cmd_param *ch_avoid_update_fp; |
| int len = sizeof(wmi_chan_avoid_update_cmd_param); |
| |
| if (ch_avoid_update_req == NULL) |
| { |
| WMA_LOGE("%s : ch_avoid_update_req is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGI("%s: WMA --> WMI_CHAN_AVOID_UPDATE", |
| __func__); |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s : wmi_buf_alloc failed", __func__); |
| return VOS_STATUS_E_NOMEM; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| ch_avoid_update_fp = (wmi_chan_avoid_update_cmd_param *) buf_ptr; |
| WMITLV_SET_HDR(&ch_avoid_update_fp->tlv_header, |
| WMITLV_TAG_STRUC_wmi_chan_avoid_update_cmd_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_chan_avoid_update_cmd_param)); |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_CHAN_AVOID_UPDATE_CMDID); |
| if (status != EOK) { |
| WMA_LOGE("wmi_unified_cmd_send" |
| " WMITLV_TABLE_WMI_CHAN_AVOID_UPDATE" |
| " returned Error %d", |
| status); |
| wmi_buf_free(buf); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGI("%s: WMA --> WMI_CHAN_AVOID_UPDATE sent through WMI", |
| __func__); |
| return VOS_STATUS_SUCCESS; |
| } |
| #endif /* FEATURE_WLAN_CH_AVOID */ |
| |
| /* Handle IBSS peer info event from FW */ |
| static int wma_ibss_peer_info_event_handler(void *handle, u_int8_t *data, |
| u_int32_t len) |
| { |
| vos_msg_t vosMsg; |
| wmi_peer_info *peer_info; |
| ol_txrx_pdev_handle pdev; |
| tSirIbssPeerInfoParams *pSmeRsp; |
| u_int32_t count, num_peers, status; |
| tSirIbssGetPeerInfoRspParams *pRsp; |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_PEER_INFO_EVENTID_param_tlvs *param_tlvs; |
| wmi_peer_info_event_fixed_param *fix_param; |
| u_int8_t peer_mac[IEEE80211_ADDR_LEN]; |
| |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma->vos_context); |
| if (NULL == pdev) { |
| WMA_LOGE("%s: could not get pdev context", __func__); |
| return 0; |
| } |
| |
| param_tlvs = (WMI_PEER_INFO_EVENTID_param_tlvs *)data; |
| fix_param = param_tlvs->fixed_param; |
| peer_info = param_tlvs->peer_info; |
| num_peers = fix_param->num_peers; |
| status = 0; |
| |
| WMA_LOGE("%s: num_peers %d", __func__, num_peers); |
| |
| pRsp = vos_mem_malloc(sizeof(tSirIbssGetPeerInfoRspParams)); |
| if (NULL == pRsp ) |
| { |
| WMA_LOGE("%s: could not allocate memory for ibss peer info rsp len %zu", |
| __func__, sizeof(tSirIbssGetPeerInfoRspParams)); |
| return 0; |
| } |
| |
| /*sanity check*/ |
| if ((num_peers > 32) || (NULL == peer_info)) |
| { |
| WMA_LOGE("%s: Invalid event data from target num_peers %d peer_info %pK", |
| __func__, num_peers, peer_info); |
| status = 1; |
| goto send_response; |
| } |
| |
| for (count = 0; count < num_peers; count++) |
| { |
| pSmeRsp = &pRsp->ibssPeerInfoRspParams.peerInfoParams[count]; |
| |
| WMI_MAC_ADDR_TO_CHAR_ARRAY (&peer_info->peer_mac_address, peer_mac); |
| vos_mem_copy(pSmeRsp->mac_addr, peer_mac, |
| sizeof(pSmeRsp->mac_addr)); |
| pSmeRsp->mcsIndex = 0; |
| pSmeRsp->rssi = peer_info->rssi + WMA_TGT_NOISE_FLOOR_DBM; |
| pSmeRsp->txRate = peer_info->data_rate; |
| pSmeRsp->txRateFlags = 0; |
| |
| WMA_LOGE("%s: peer " MAC_ADDRESS_STR "rssi %d txRate %d", __func__, |
| MAC_ADDR_ARRAY(peer_mac), pSmeRsp->rssi, pSmeRsp->txRate); |
| |
| peer_info++; |
| } |
| |
| send_response: |
| /* message header */ |
| pRsp->mesgType = eWNI_SME_IBSS_PEER_INFO_RSP; |
| pRsp->mesgLen = sizeof(tSirIbssGetPeerInfoRspParams); |
| pRsp->ibssPeerInfoRspParams.status = status; |
| pRsp->ibssPeerInfoRspParams.numPeers = num_peers; |
| |
| /* vos message wrapper */ |
| vosMsg.type = eWNI_SME_IBSS_PEER_INFO_RSP; |
| vosMsg.bodyptr = (void *)pRsp; |
| vosMsg.bodyval = 0; |
| |
| if (VOS_STATUS_SUCCESS != vos_mq_post_message(VOS_MQ_ID_SME, (vos_msg_t*)&vosMsg)) |
| { |
| WMA_LOGE("%s: could not post peer info rsp msg to SME", __func__); |
| /* free the mem and return */ |
| vos_mem_free((v_VOID_t *) pRsp); |
| } |
| |
| return 0; |
| } |
| |
| /* Handle fast tx failure indication event from FW */ |
| static int wma_fast_tx_fail_event_handler(void *handle, u_int8_t *data, |
| u_int32_t len) |
| { |
| u_int8_t tx_fail_cnt; |
| u_int8_t peer_mac[IEEE80211_ADDR_LEN]; |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| WMI_PEER_TX_FAIL_CNT_THR_EVENTID_param_tlvs *param_tlvs; |
| wmi_peer_tx_fail_cnt_thr_event_fixed_param *fix_param; |
| |
| param_tlvs = (WMI_PEER_TX_FAIL_CNT_THR_EVENTID_param_tlvs *)data; |
| fix_param = param_tlvs->fixed_param; |
| |
| WMI_MAC_ADDR_TO_CHAR_ARRAY (&fix_param->peer_mac_address, peer_mac); |
| WMA_LOGE("%s: received fast tx failure event for peer" |
| " 0x:%2x:0x%2x:0x%2x:0x%2x:0x%2x:0x%2x seq No %d", __func__, |
| peer_mac[0], peer_mac[1], peer_mac[2], peer_mac[3], |
| peer_mac[4], peer_mac[5], fix_param->seq_no); |
| |
| tx_fail_cnt = fix_param->seq_no; |
| |
| /*call HDD callback*/ |
| if (NULL != wma->hddTxFailCb) |
| { |
| wma->hddTxFailCb(peer_mac, tx_fail_cnt); |
| } |
| else |
| { |
| WMA_LOGE("%s: HDD callback is %pK", __func__, wma->hddTxFailCb); |
| } |
| |
| return 0; |
| } |
| |
| /* function : wma_scan_completion_timeout |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| void wma_scan_completion_timeout(void *data) |
| { |
| tp_wma_handle wma_handle; |
| u_int8_t vdev_id; |
| |
| WMA_LOGE("%s: Timeout occured for scan command", __func__); |
| |
| wma_handle = (tp_wma_handle) data; |
| |
| vdev_id = wma_handle->wma_scan_timer_info.vdev_id; |
| |
| if (wma_handle->wma_scan_timer_info.scan_id != |
| wma_handle->interfaces[vdev_id].scan_info.scan_id) { |
| WMA_LOGE("%s: Scan ID mismatch", __func__); |
| return; |
| } |
| |
| /* |
| * To avoid race condition between scan timeout in host and in firmware |
| * here we should just send abort scan to firmware and do cleanup after |
| * receiving event from firmware. Since at this moment there will be no |
| * outstanding scans, aborting should not cause any problem in firmware. |
| */ |
| if (wma_handle->interfaces[vdev_id].scan_info.scan_id != 0) { |
| tAbortScanParams abortScan; |
| abortScan.SessionId = vdev_id; |
| WMA_LOGW("%s: Sending abort for timed out scan", __func__); |
| wma_stop_scan(wma_handle, &abortScan); |
| } |
| |
| return; |
| } |
| |
| /** |
| * wma_log_completion_timeout() - Log completion timeout |
| * @data: Timeout handler data |
| * |
| * This function is called when log completion timer expires |
| * |
| * Return: None |
| */ |
| void wma_log_completion_timeout(void *data) |
| { |
| tp_wma_handle wma_handle; |
| |
| WMA_LOGE("%s: Timeout occured for log completion command", __func__); |
| |
| wma_handle = (tp_wma_handle) data; |
| if (!wma_handle) |
| WMA_LOGE("%s: Invalid WMA handle", __func__); |
| |
| /* Though we did not receive any event from FW, |
| * we can flush whatever logs we have with us */ |
| vos_logging_set_fw_flush_complete(); |
| |
| return; |
| } |
| |
| #ifdef SAP_AUTH_OFFLOAD |
| static int wma_sap_ofl_add_sta_handler(void *handle, u_int8_t *data, |
| u_int32_t data_len) |
| { |
| tp_wma_handle wma = handle; |
| WMI_SAP_OFL_ADD_STA_EVENTID_param_tlvs *param_buf = NULL; |
| wmi_sap_ofl_add_sta_event_fixed_param *sta_add_event = NULL; |
| struct sap_offload_add_sta_req *add_sta_req = NULL; |
| u_int8_t *buf_ptr; |
| |
| param_buf = (WMI_SAP_OFL_ADD_STA_EVENTID_param_tlvs *)data; |
| sta_add_event = param_buf->fixed_param; |
| buf_ptr = (u_int8_t *)param_buf->bufp; |
| |
| if (sta_add_event->data_len > MAX_CONNECT_REQ_LENGTH) { |
| WMA_LOGE("%s: Received data_len %d greater than max", |
| __func__, sta_add_event->data_len); |
| return 0; |
| } |
| add_sta_req = vos_mem_malloc(sizeof(*add_sta_req)); |
| if (!add_sta_req) { |
| WMA_LOGE("%s: Failed to alloc memory for sap_ofl_add_sta_event", |
| __func__); |
| return 0; |
| } |
| vos_mem_set(add_sta_req, sizeof(*add_sta_req), 0); |
| add_sta_req->assoc_id = sta_add_event->assoc_id; |
| add_sta_req->conn_req_len = sta_add_event->data_len; |
| vos_mem_copy(add_sta_req->conn_req, buf_ptr, |
| sta_add_event->data_len); |
| |
| wma_send_msg(wma, WDA_SAP_OFL_ADD_STA, add_sta_req, 0); |
| |
| return 1; |
| } |
| |
| static int wma_sap_ofl_del_sta_handler(void *handle, u_int8_t *data, |
| u_int32_t data_len) |
| { |
| tp_wma_handle wma = handle; |
| WMI_SAP_OFL_DEL_STA_EVENTID_param_tlvs *param_buf = NULL; |
| wmi_sap_ofl_del_sta_event_fixed_param *sta_del_event = NULL; |
| struct sap_offload_del_sta_req *del_sta_req = NULL; |
| |
| param_buf = (WMI_SAP_OFL_DEL_STA_EVENTID_param_tlvs *)data; |
| sta_del_event = param_buf->fixed_param; |
| |
| del_sta_req = vos_mem_malloc(sizeof(*del_sta_req)); |
| if (!del_sta_req) { |
| WMA_LOGE("%s: Failed to alloc memory for sap_ofl_del_sta_event", |
| __func__); |
| return 0; |
| } |
| vos_mem_set(del_sta_req, sizeof(*del_sta_req), 0); |
| WMI_MAC_ADDR_TO_CHAR_ARRAY(&sta_del_event->peer_macaddr, |
| del_sta_req->sta_mac); |
| |
| del_sta_req->assoc_id = sta_del_event->assoc_id; |
| del_sta_req->reason_code = sta_del_event->reason; |
| del_sta_req->flags = sta_del_event->flags; |
| wma_send_msg(wma, WDA_SAP_OFL_DEL_STA, del_sta_req, 0); |
| return 1; |
| } |
| #endif /* SAP_AUTH_OFFLOAD */ |
| |
| /** |
| * wma_vdev_tsf_handler() - handle tsf event indicated by FW |
| * |
| * @handle: wma context |
| * @data: event buffer |
| * @data len: length of event buffer |
| * |
| * Return: 0 on success |
| */ |
| static int wma_vdev_tsf_handler(void *handle, uint8_t *data, |
| uint32_t data_len) |
| { |
| vos_msg_t vos_msg = {0}; |
| WMI_VDEV_TSF_REPORT_EVENTID_param_tlvs *param_buf; |
| wmi_vdev_tsf_report_event_fixed_param *tsf_event; |
| struct stsf *ptsf; |
| |
| if (data == NULL) { |
| WMA_LOGE("%s: invalid pointer", __func__); |
| return -EINVAL; |
| } |
| ptsf = vos_mem_malloc(sizeof(*ptsf)); |
| if (NULL == ptsf) { |
| WMA_LOGE("%s: failed to allocate sSirtsf memory", __func__); |
| return -ENOMEM; |
| } |
| |
| param_buf = (WMI_VDEV_TSF_REPORT_EVENTID_param_tlvs *)data; |
| tsf_event = param_buf->fixed_param; |
| |
| ptsf->vdev_id = tsf_event->vdev_id; |
| ptsf->tsf_low = tsf_event->tsf_low; |
| ptsf->tsf_high = tsf_event->tsf_high; |
| |
| WMA_LOGD("%s: receive WMI_VDEV_TSF_REPORT_EVENTID ", __func__); |
| WMA_LOGD("%s: vdev_id = %u,tsf_low =%u, tsf_high = %u", __func__, |
| ptsf->vdev_id, ptsf->tsf_low, ptsf->tsf_high); |
| |
| vos_msg.type = eWNI_SME_TSF_EVENT; |
| vos_msg.bodyptr = ptsf; |
| vos_msg.bodyval = 0; |
| |
| if (VOS_STATUS_SUCCESS != |
| vos_mq_post_message(VOS_MQ_ID_SME, &vos_msg)) { |
| |
| WMA_LOGP("%s: Failed to post eWNI_SME_TSF_EVENT", __func__); |
| vos_mem_free(ptsf); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /** |
| * wma_echo_event_handler() - received echo response event from firmware |
| * @handle: wma context |
| * @event_buf: event buffer |
| * @len: length of event buffer |
| * |
| * Return: 0 on success |
| */ |
| static int wma_echo_event_handler(void *handle, u_int8_t *event_buf, |
| u_int32_t len) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| vos_msg_t sme_msg = {0}; |
| |
| WMA_LOGD("Received Echo reply from firmware!"); |
| sme_msg.type = eWNI_SME_FW_STATUS_IND; |
| |
| vos_status = vos_mq_post_message(VOS_MODULE_ID_SME, &sme_msg); |
| if (!VOS_IS_STATUS_SUCCESS(vos_status)) { |
| WMA_LOGE("%s: Fail to post firmware status ind msg", __func__); |
| } |
| |
| return 0; |
| } |
| |
| #if defined(QCA_WIFI_FTM) && defined(WLAN_SCPC_FEATURE) |
| /** |
| * wma_scpc_event_handler() - handler for scpc event from firmware |
| * @handle: wma context |
| * @event_buf: pointer to the event buffer |
| * @len: length of the event buffer |
| * |
| * Once SCPC feature is enabled in FTM mode, firmware will do calibration |
| * and indicates calibrated data in an SCPC message. |
| * |
| * This function is used to parse SCPC message. Calibrated data in an SCPC |
| * message is formated like this: |
| * patch1 offset(byte3~0), patch1 length(byte7~4), patch1 data |
| * ...... |
| * patchn offset(byte3~0), patchn length(byte7~4), patchn data |
| * All data patches are 4bytes aligned. But the length indicated here is |
| * not multiple of 4. |
| * |
| * Return: 0 on success. |
| */ |
| int wma_scpc_event_handler(void *handle, u_int8_t *event_buf, u_int32_t len) |
| { |
| u_int8_t *buf; |
| u_int32_t length; |
| u_int32_t i; |
| u_int32_t n; |
| WMI_PDEV_UTF_SCPC_EVENTID_param_tlvs *param_buf; |
| wmi_scpc_event_fixed_param *scpc_event; |
| struct _bd { |
| u_int32_t offset; |
| u_int32_t length; |
| u_int8_t data[0]; |
| } *bd_data; |
| |
| WMA_LOGD("WMA event <---- SCPC\n"); |
| if ((event_buf == NULL) || (len < sizeof(wmi_scpc_event_fixed_param))) { |
| WMA_LOGE("%s: invalid pointer", __func__); |
| return -EINVAL; |
| } |
| |
| param_buf = (WMI_PDEV_UTF_SCPC_EVENTID_param_tlvs *)event_buf; |
| scpc_event = param_buf->fixed_param; |
| length = len - sizeof(wmi_scpc_event_fixed_param); |
| |
| |
| buf = (u_int8_t *)scpc_event + sizeof(wmi_scpc_event_fixed_param); |
| |
| WMA_LOGD("%s: section count is %d, data length is %d, tag is 0x%x.\n", |
| __func__, scpc_event->num_patch, length, *(u_int32_t *)buf); |
| |
| /* skip the tag */ |
| buf += sizeof(u_int32_t); |
| |
| i = n = 0; |
| bd_data = (struct _bd *)&buf[n]; |
| n += roundup((sizeof(struct _bd) + bd_data->length), 4); |
| |
| while ((n < length) && (i < scpc_event->num_patch)) { |
| bd_data = (struct _bd *)&buf[n]; |
| |
| WMA_LOGD("%s: board data patch%i, offset= %d, length= %d.\n", |
| __func__, i, bd_data->offset, bd_data->length); |
| /* cache the data section */ |
| vos_cache_boarddata(bd_data->offset, |
| bd_data->length, bd_data->data); |
| |
| n += roundup((sizeof(struct _bd) + bd_data->length), 4); |
| i++; |
| } |
| |
| WMA_LOGD("%s: %d patches in message, %d cached.\n", |
| __func__, scpc_event->num_patch, i); |
| |
| return 0; |
| } |
| #else |
| int wma_scpc_event_handler(void *handle, u_int8_t *event_buf, u_int32_t len) |
| { |
| return 0; |
| } |
| #endif |
| |
| /* function : wma_start |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_start(v_VOID_t *vos_ctx) |
| { |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| tp_wma_handle wma_handle; |
| int status; |
| WMA_LOGD("%s: Enter", __func__); |
| |
| wma_handle = vos_get_context(VOS_MODULE_ID_WDA, vos_ctx); |
| |
| /* validate the wma_handle */ |
| if (NULL == wma_handle) { |
| WMA_LOGP("%s: Invalid handle", __func__); |
| vos_status = VOS_STATUS_E_INVAL; |
| goto end; |
| } |
| |
| |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_SCAN_EVENTID, |
| wma_scan_event_callback); |
| if (0 != status) { |
| WMA_LOGP("%s: Failed to register scan callback", __func__); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_ROAM_EVENTID, |
| wma_roam_event_callback); |
| if (0 != status) { |
| WMA_LOGP("%s: Failed to register Roam callback", __func__); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_WOW_WAKEUP_HOST_EVENTID, |
| wma_wow_wakeup_host_event); |
| if (status) { |
| WMA_LOGP("%s: Failed to register wow wakeup host event handler", |
| __func__); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| |
| #ifdef FEATURE_WLAN_D0WOW |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_D0_WOW_DISABLE_ACK_EVENTID, |
| wma_d0_wow_disable_ack_event); |
| if (status) { |
| WMA_LOGE("%s: Failed to register D0-WOW disable event handler!", |
| __func__); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| #endif |
| |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| if (WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_NLO)) { |
| |
| WMA_LOGD("FW supports pno offload, registering nlo match handler"); |
| |
| status = wmi_unified_register_event_handler( |
| wma_handle->wmi_handle, |
| WMI_NLO_MATCH_EVENTID, |
| wma_nlo_match_evt_handler); |
| if (status) { |
| WMA_LOGE("Failed to register nlo match event cb"); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| |
| status = wmi_unified_register_event_handler( |
| wma_handle->wmi_handle, |
| WMI_NLO_SCAN_COMPLETE_EVENTID, |
| wma_nlo_scan_cmp_evt_handler); |
| if (status) { |
| WMA_LOGE("Failed to register nlo scan comp event cb"); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| } |
| #endif |
| |
| #ifdef WLAN_FEATURE_APFIND |
| WMA_LOGD("APFIND event handler register"); |
| status = wmi_unified_register_event_handler( |
| wma_handle->wmi_handle, |
| WMI_APFIND_EVENTID, |
| wma_apfind_evt_handler); |
| if (status) { |
| WMA_LOGE("Failed to register APFIND event cb"); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| #endif /* WLAN_FEATURE_APFIND*/ |
| |
| #if defined(CONFIG_HL_SUPPORT) || defined(QCA_SUPPORT_TXRX_VDEV_PAUSE_LL) |
| WMA_LOGE("MCC TX Pause Event Handler register"); |
| status = wmi_unified_register_event_handler( |
| wma_handle->wmi_handle, |
| WMI_TX_PAUSE_EVENTID, |
| wma_mcc_vdev_tx_pause_evt_handler); |
| #endif /* QCA_SUPPORT_TXRX_VDEV_PAUSE_LL */ |
| |
| #ifdef FEATURE_WLAN_CH_AVOID |
| WMA_LOGD("Registering channel to avoid handler"); |
| |
| status = wmi_unified_register_event_handler( |
| wma_handle->wmi_handle, |
| WMI_WLAN_FREQ_AVOID_EVENTID, |
| wma_channel_avoid_evt_handler); |
| if (status) { |
| WMA_LOGE("Failed to register channel to avoid event cb"); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| #endif /* FEATURE_WLAN_CH_AVOID */ |
| #ifdef FEATURE_WLAN_AUTO_SHUTDOWN |
| WMA_LOGD("Registering auto shutdown handler"); |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_HOST_AUTO_SHUTDOWN_EVENTID, wma_auto_shutdown_event_handler); |
| if (status) { |
| WMA_LOGE("Failed to register WMI Auto shutdown event handler"); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| #endif |
| status = wmi_unified_register_event_handler( |
| wma_handle->wmi_handle, |
| WMI_THERMAL_MGMT_EVENTID, |
| wma_thermal_mgmt_evt_handler); |
| if (status) { |
| WMA_LOGE("Failed to register thermal mitigation event cb"); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| |
| status = wma_ocb_register_event_handlers(wma_handle); |
| |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_ECHO_EVENTID, |
| wma_echo_event_handler); |
| if (status) { |
| WMA_LOGE("Failed to register echo event cb"); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| |
| vos_status = VOS_STATUS_SUCCESS; |
| |
| #ifdef QCA_WIFI_FTM |
| /* |
| * Tx mgmt attach requires TXRX context which is not created |
| * in FTM mode as WLANTL_Open will not be called in this mode. |
| * So skip the TX mgmt attach. |
| */ |
| if (vos_get_conparam() == VOS_FTM_MODE) |
| goto end; |
| #endif |
| |
| if (WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_RMC)) |
| { |
| |
| WMA_LOGD("FW supports cesium network, registering event handlers"); |
| |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_PEER_INFO_EVENTID, |
| wma_ibss_peer_info_event_handler); |
| if (status) |
| { |
| WMA_LOGE("Failed to register ibss peer info event cb"); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_PEER_TX_FAIL_CNT_THR_EVENTID, |
| wma_fast_tx_fail_event_handler); |
| if (status) |
| { |
| WMA_LOGE("Failed to register peer fast tx failure event cb"); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| } |
| else |
| { |
| WMA_LOGE("Target does not support cesium network"); |
| } |
| |
| vos_status = wma_tx_attach(wma_handle); |
| if(vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGP("%s: Failed to register tx management", __func__); |
| goto end; |
| } |
| if (VOS_FTM_MODE != vos_get_conparam()) { |
| /* Initialize firmware time stamp sync timer */ |
| vos_status = vos_timer_init(&wma_handle->wma_fw_time_sync_timer, |
| VOS_TIMER_TYPE_SW, |
| wma_send_time_stamp_sync_cmd, |
| wma_handle); |
| if (vos_status != VOS_STATUS_SUCCESS) |
| WMA_LOGE(FL("Failed to initialize firmware time stamp sync timer")); |
| |
| /* Start firmware time stamp sync timer */ |
| wma_send_time_stamp_sync_cmd(wma_handle); |
| } |
| |
| /* Initialize scan completion timeout */ |
| vos_status = vos_timer_init(&wma_handle->wma_scan_comp_timer, |
| VOS_TIMER_TYPE_SW, |
| wma_scan_completion_timeout, |
| wma_handle); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to initialize scan completion timeout"); |
| goto end; |
| } |
| |
| /* Initialize log completion timeout */ |
| vos_status = vos_timer_init(&wma_handle->log_completion_timer, |
| VOS_TIMER_TYPE_SW, |
| wma_log_completion_timeout, |
| wma_handle); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to initialize log completion timeout"); |
| goto end; |
| } |
| |
| /* Initialize the get temperature event handler */ |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_PDEV_TEMPERATURE_EVENTID, |
| wma_pdev_temperature_evt_handler); |
| if (status != VOS_STATUS_SUCCESS) |
| { |
| WMA_LOGE("Failed to register get_temperature event cb"); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| |
| #ifdef SAP_AUTH_OFFLOAD |
| if (WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_SAP_AUTH_OFFLOAD)) { |
| /* Initialize the station connect event handler for |
| * software AP authentication offload feature. |
| */ |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_SAP_OFL_ADD_STA_EVENTID, |
| wma_sap_ofl_add_sta_handler); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to register sap offload add_sta event cb"); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| /* Initialize the station disconnect event handler for |
| * software AP authentication offload feature. |
| */ |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_SAP_OFL_DEL_STA_EVENTID, |
| wma_sap_ofl_del_sta_handler); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to register sap offload del_sta event cb"); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| } |
| #endif /* SAP_AUTH_OFFLOAD */ |
| |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_VDEV_TSF_REPORT_EVENTID, |
| wma_vdev_tsf_handler); |
| if (0 != status) { |
| WMA_LOGP("%s: Failed to register tsf callback", __func__); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| |
| /* Initialize the log flush complete event handler */ |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_DEBUG_MESG_FLUSH_COMPLETE_EVENTID, |
| wma_flush_complete_evt_handler); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to register log flush complete event cb"); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| |
| /* Initialize the SMPS force mode command event handler */ |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_STA_SMPS_FORCE_MODE_COMPLETE_EVENTID, |
| wma_smps_force_mode_callback); |
| if (VOS_STATUS_SUCCESS != status) { |
| WMA_LOGP("%s: SMPS force mode event registration failed", |
| __func__); |
| vos_status = VOS_STATUS_E_FAILURE; |
| goto end; |
| } |
| |
| end: |
| WMA_LOGD("%s: Exit", __func__); |
| return vos_status; |
| } |
| |
| /* function : wma_stop |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_stop(v_VOID_t *vos_ctx, tANI_U8 reason) |
| { |
| tp_wma_handle wma_handle; |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| int i; |
| |
| wma_handle = vos_get_context(VOS_MODULE_ID_WDA, vos_ctx); |
| |
| WMA_LOGD("%s: Enter", __func__); |
| |
| /* validate the wma_handle */ |
| if (NULL == wma_handle) { |
| WMA_LOGP("%s: Invalid handle", __func__); |
| vos_status = VOS_STATUS_E_INVAL; |
| goto end; |
| } |
| |
| #ifdef QCA_WIFI_FTM |
| /* |
| * Tx mgmt detach requires TXRX context which is not created |
| * in FTM mode as WLANTL_Open will not be called in this mode. |
| * So skip the TX mgmt detach. |
| */ |
| if (vos_get_conparam() == VOS_FTM_MODE) { |
| vos_status = VOS_STATUS_SUCCESS; |
| goto end; |
| } |
| #endif |
| |
| if (wma_handle->ack_work_ctx) { |
| vos_flush_work(&wma_handle->ack_work_ctx->ack_cmp_work); |
| adf_os_mem_free(wma_handle->ack_work_ctx); |
| wma_handle->ack_work_ctx = NULL; |
| } |
| |
| /* Destroy the timer for scan completion */ |
| vos_status = vos_timer_destroy(&wma_handle->wma_scan_comp_timer); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to destroy the scan completion timer"); |
| } |
| |
| /* Destroy the timer for log completion */ |
| vos_status = vos_timer_destroy(&wma_handle->log_completion_timer); |
| if (vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to destroy the log completion timer"); |
| } |
| |
| if (VOS_FTM_MODE != vos_get_conparam()) { |
| /* Destroy firmware time stamp sync timer */ |
| vos_status = vos_timer_destroy(&wma_handle->wma_fw_time_sync_timer); |
| if (vos_status != VOS_STATUS_SUCCESS) |
| WMA_LOGE(FL("Failed to destroy the fw time sync timer")); |
| } |
| |
| /* There's no need suspend target which is already down during SSR. */ |
| if (!vos_is_logp_in_progress(VOS_MODULE_ID_HIF, NULL)) { |
| #ifdef HIF_USB |
| /* Suspend the target and enable interrupt */ |
| if (wma_suspend_target(wma_handle, 0)) |
| WMA_LOGE("Failed to suspend target"); |
| #else |
| /* Suspend the target and disable interrupt */ |
| if (wma_suspend_target(wma_handle, 1)) |
| WMA_LOGE("Failed to suspend target"); |
| #endif |
| } |
| |
| /* clean up ll-queue for all vdev */ |
| for (i = 0; i < wma_handle->max_bssid; i++) { |
| if (wma_handle->interfaces[i].handle && |
| wma_handle->interfaces[i].vdev_up) { |
| ol_txrx_vdev_flush(wma_handle->interfaces[i].handle); |
| } |
| } |
| |
| vos_status = wma_tx_detach(wma_handle); |
| if(vos_status != VOS_STATUS_SUCCESS) { |
| WMA_LOGP("%s: Failed to deregister tx management", __func__); |
| goto end; |
| } |
| |
| end: |
| WMA_LOGD("%s: Exit", __func__); |
| return vos_status; |
| } |
| |
| static void wma_cleanup_vdev_resp(tp_wma_handle wma) |
| { |
| struct wma_target_req *msg, *tmp; |
| |
| adf_os_spin_lock_bh(&wma->vdev_respq_lock); |
| list_for_each_entry_safe(msg, tmp, |
| &wma->vdev_resp_queue, node) { |
| list_del(&msg->node); |
| vos_timer_destroy(&msg->event_timeout); |
| adf_os_mem_free(msg); |
| } |
| adf_os_spin_unlock_bh(&wma->vdev_respq_lock); |
| } |
| |
| VOS_STATUS wma_wmi_service_close(v_VOID_t *vos_ctx) |
| { |
| tp_wma_handle wma_handle; |
| struct beacon_info *bcn; |
| int i; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| |
| wma_handle = vos_get_context(VOS_MODULE_ID_WDA, vos_ctx); |
| |
| /* validate the wma_handle */ |
| if (NULL == wma_handle) { |
| WMA_LOGE("%s: Invalid wma handle", __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| /* validate the wmi handle */ |
| if (NULL == wma_handle->wmi_handle) { |
| WMA_LOGE("%s: Invalid wmi handle", __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| /* dettach the wmi serice */ |
| WMA_LOGD("calling wmi_unified_detach"); |
| wmi_unified_detach(wma_handle->wmi_handle); |
| wma_handle->wmi_handle = NULL; |
| |
| for (i = 0; i < wma_handle->max_bssid; i++) { |
| bcn = wma_handle->interfaces[i].beacon; |
| |
| if (bcn) { |
| if (bcn->dma_mapped) |
| adf_nbuf_unmap_single(wma_handle->adf_dev, |
| bcn->buf, ADF_OS_DMA_TO_DEVICE); |
| adf_nbuf_free(bcn->buf); |
| vos_mem_free(bcn); |
| wma_handle->interfaces[i].beacon = NULL; |
| } |
| |
| if (wma_handle->interfaces[i].handle) { |
| adf_os_mem_free(wma_handle->interfaces[i].handle); |
| wma_handle->interfaces[i].handle = NULL; |
| } |
| |
| if (wma_handle->interfaces[i].addBssStaContext) { |
| adf_os_mem_free(wma_handle-> |
| interfaces[i].addBssStaContext); |
| wma_handle->interfaces[i].addBssStaContext = NULL; |
| } |
| |
| if (wma_handle->interfaces[i].del_staself_req) { |
| vos_mem_free(wma_handle->interfaces[i].del_staself_req); |
| wma_handle->interfaces[i].del_staself_req = NULL; |
| } |
| } |
| |
| vos_mem_free(wma_handle->interfaces); |
| /* free the wma_handle */ |
| vos_free_context(wma_handle->vos_context, VOS_MODULE_ID_WDA, wma_handle); |
| |
| adf_os_mem_free(((pVosContextType) vos_ctx)->cfg_ctx); |
| WMA_LOGD("%s: Exit", __func__); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_wmi_work_close() - close the work queue items associated with WMI |
| * @vos_ctx: Pointer to vos context |
| * |
| * This function closes work queue items associated with WMI, but not fully |
| * closes WMI service. |
| * |
| * Return: VOS_STATUS_SUCCESS if work close is successful. Otherwise |
| * proper error codes. |
| */ |
| VOS_STATUS wma_wmi_work_close(v_VOID_t *vos_ctx) |
| { |
| tp_wma_handle wma_handle; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| |
| wma_handle = vos_get_context(VOS_MODULE_ID_WDA, vos_ctx); |
| |
| /* validate the wma_handle */ |
| if (NULL == wma_handle) { |
| WMA_LOGE("%s: Invalid wma handle", __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| /* validate the wmi handle */ |
| if (NULL == wma_handle->wmi_handle) { |
| WMA_LOGE("%s: Invalid wmi handle", __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| /* remove the wmi work */ |
| WMA_LOGD("calling wmi_unified_remove_work"); |
| wmi_unified_remove_work(wma_handle->wmi_handle); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* |
| * Detach DFS methods |
| */ |
| static void wma_dfs_detach(struct ieee80211com *dfs_ic) |
| { |
| dfs_detach(dfs_ic); |
| |
| adf_os_spinlock_destroy(&dfs_ic->chan_lock); |
| if (NULL != dfs_ic->ic_curchan) { |
| OS_FREE(dfs_ic->ic_curchan); |
| dfs_ic->ic_curchan = NULL; |
| } |
| |
| OS_FREE(dfs_ic); |
| } |
| |
| /* function : wma_close |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| VOS_STATUS wma_close(v_VOID_t *vos_ctx) |
| { |
| tp_wma_handle wma_handle; |
| u_int32_t idx; |
| u_int8_t ptrn_id; |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| |
| wma_handle = vos_get_context(VOS_MODULE_ID_WDA, vos_ctx); |
| |
| /* validate the wma_handle */ |
| if (NULL == wma_handle) { |
| WMA_LOGE("%s: Invalid wma handle", __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| /* validate the wmi handle */ |
| if (NULL == wma_handle->wmi_handle) { |
| WMA_LOGP("%s: Invalid wmi handle", __func__); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| if (wma_handle->events_logs_list) { |
| vos_mem_free(wma_handle->events_logs_list); |
| wma_handle->events_logs_list = NULL; |
| WMA_LOGD("%s: Event log list freed", __func__); |
| } |
| |
| if (wma_handle->link_stats_results) { |
| vos_mem_free(wma_handle->link_stats_results); |
| wma_handle->link_stats_results = NULL; |
| } |
| |
| /* Free wow pattern cache */ |
| for (ptrn_id = 0; ptrn_id < wma_handle->wlan_resource_config.num_wow_filters; |
| ptrn_id++) |
| wma_free_wow_ptrn(wma_handle, ptrn_id); |
| |
| if (vos_get_conparam() != VOS_FTM_MODE) { |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| vos_wake_lock_destroy(&wma_handle->pno_wake_lock); |
| #endif |
| #ifdef FEATURE_WLAN_EXTSCAN |
| vos_wake_lock_destroy(&wma_handle->extscan_wake_lock); |
| #endif |
| vos_wake_lock_destroy(&wma_handle->wow_wake_lock); |
| vos_wake_lock_destroy(&wma_handle->wow_auth_req_wl); |
| vos_wake_lock_destroy(&wma_handle->wow_assoc_req_wl); |
| vos_wake_lock_destroy(&wma_handle->wow_deauth_rec_wl); |
| vos_wake_lock_destroy(&wma_handle->wow_disassoc_rec_wl); |
| vos_wake_lock_destroy(&wma_handle->wow_ap_assoc_lost_wl); |
| vos_wake_lock_destroy(&wma_handle->wow_auto_shutdown_wl); |
| } |
| |
| vos_mem_zero(&wma_handle->wow, sizeof(struct wma_wow)); |
| wma_runtime_context_deinit(wma_handle); |
| |
| /* unregister Firmware debug log */ |
| vos_status = dbglog_deinit(wma_handle->wmi_handle); |
| if(vos_status != VOS_STATUS_SUCCESS) |
| WMA_LOGP("%s: dbglog_deinit failed", __func__); |
| |
| /* close the vos events */ |
| vos_event_destroy(&wma_handle->wma_ready_event); |
| vos_event_destroy(&wma_handle->target_suspend); |
| vos_event_destroy(&wma_handle->wma_resume_event); |
| vos_event_destroy(&wma_handle->wow_tx_complete); |
| vos_event_destroy(&wma_handle->runtime_suspend); |
| vos_event_destroy(&wma_handle->recovery_event); |
| |
| /* Destroy Tx Frame Complete event */ |
| vos_event_destroy(&wma_handle->tx_frm_download_comp_event); |
| |
| wma_cleanup_vdev_resp(wma_handle); |
| for(idx = 0; idx < wma_handle->num_mem_chunks; ++idx) { |
| adf_os_mem_free_consistent( |
| wma_handle->adf_dev, |
| wma_handle->mem_chunks[idx].len, |
| wma_handle->mem_chunks[idx].vaddr, |
| wma_handle->mem_chunks[idx].paddr, |
| adf_os_get_dma_mem_context( |
| (&(wma_handle->mem_chunks[idx])), |
| memctx)); |
| } |
| |
| #if defined(QCA_WIFI_FTM) |
| /* Detach UTF and unregister the handler */ |
| if (vos_get_conparam() == VOS_FTM_MODE) |
| wma_utf_detach(wma_handle); |
| #endif |
| |
| if (NULL != wma_handle->dfs_ic){ |
| wma_dfs_detach(wma_handle->dfs_ic); |
| wma_handle->dfs_ic = NULL; |
| } |
| |
| if (NULL != wma_handle->pGetRssiReq) { |
| adf_os_mem_free(wma_handle->pGetRssiReq); |
| wma_handle->pGetRssiReq = NULL; |
| } |
| |
| wma_ndp_unregister_all_event_handlers(wma_handle); |
| |
| WMA_LOGD("%s: Exit", __func__); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| static v_VOID_t wma_update_fw_config(tp_wma_handle wma_handle, |
| struct wma_target_cap *tgt_cap) |
| { |
| /* |
| * tgt_cap contains default target resource configuration |
| * which can be modified here, if required |
| */ |
| /* Override the no. of max fragments as per platform configuration */ |
| tgt_cap->wlan_resource_config.max_frag_entries = |
| MIN(QCA_OL_11AC_TX_MAX_FRAGS, wma_handle->max_frag_entry); |
| wma_handle->max_frag_entry = tgt_cap->wlan_resource_config.max_frag_entries; |
| /* Update no. of maxWoWFilters depending on BPF service */ |
| if (WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_BPF_OFFLOAD)) |
| tgt_cap->wlan_resource_config.num_wow_filters = |
| WMA_STA_WOW_DEFAULT_PTRN_MAX; |
| } |
| |
| /** |
| * allocate a chunk of memory at the index indicated and |
| * if allocation fail allocate smallest size possiblr and |
| * return number of units allocated. |
| */ |
| static u_int32_t wma_alloc_host_mem_chunk(tp_wma_handle wma_handle, |
| u_int32_t req_id, u_int32_t idx, |
| u_int32_t num_units, |
| u_int32_t unit_len) |
| { |
| adf_os_dma_addr_t paddr; |
| if (!num_units || !unit_len) { |
| return 0; |
| } |
| wma_handle->mem_chunks[idx].vaddr = NULL ; |
| /** reduce the requested allocation by half until allocation succeeds */ |
| while(wma_handle->mem_chunks[idx].vaddr == NULL && num_units ) { |
| wma_handle->mem_chunks[idx].vaddr = adf_os_mem_alloc_consistent( |
| wma_handle->adf_dev, num_units*unit_len, &paddr, |
| adf_os_get_dma_mem_context( |
| (&(wma_handle->mem_chunks[idx])), |
| memctx)); |
| if(wma_handle->mem_chunks[idx].vaddr == NULL) { |
| num_units = (num_units >> 1) ; /* reduce length by half */ |
| } else { |
| wma_handle->mem_chunks[idx].paddr = paddr; |
| wma_handle->mem_chunks[idx].len = num_units*unit_len; |
| wma_handle->mem_chunks[idx].req_id = req_id; |
| } |
| } |
| return num_units; |
| } |
| |
| #define HOST_MEM_SIZE_UNIT 4 |
| /* |
| * allocate amount of memory requested by FW. |
| */ |
| static void wma_alloc_host_mem(tp_wma_handle wma_handle, u_int32_t req_id, |
| u_int32_t num_units, u_int32_t unit_len) |
| { |
| u_int32_t remaining_units,allocated_units, idx; |
| |
| /* adjust the length to nearest multiple of unit size */ |
| unit_len = (unit_len + (HOST_MEM_SIZE_UNIT - 1)) & |
| (~(HOST_MEM_SIZE_UNIT - 1)); |
| idx = wma_handle->num_mem_chunks ; |
| remaining_units = num_units; |
| while(remaining_units) { |
| allocated_units = wma_alloc_host_mem_chunk(wma_handle, req_id, |
| idx, remaining_units, |
| unit_len); |
| if (allocated_units == 0) { |
| WMA_LOGE("FAILED TO ALLOCATED memory unit len %d" |
| " units requested %d units allocated %d ", |
| unit_len, num_units, |
| (num_units - remaining_units)); |
| wma_handle->num_mem_chunks = idx; |
| break; |
| } |
| remaining_units -= allocated_units; |
| ++idx; |
| if (idx == MAX_MEM_CHUNKS ) { |
| WMA_LOGE("RWACHED MAX CHUNK LIMIT for memory units %d" |
| " unit len %d requested by FW," |
| " only allocated %d ", |
| num_units,unit_len, |
| (num_units - remaining_units)); |
| wma_handle->num_mem_chunks = idx; |
| break; |
| } |
| } |
| wma_handle->num_mem_chunks = idx; |
| } |
| |
| static inline void wma_update_target_services(tp_wma_handle wh, |
| struct hdd_tgt_services *cfg) |
| { |
| /* STA power save */ |
| cfg->sta_power_save = WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, |
| WMI_SERVICE_STA_PWRSAVE); |
| |
| /* Enable UAPSD */ |
| cfg->uapsd = WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, |
| WMI_SERVICE_AP_UAPSD); |
| |
| /* Update AP DFS service */ |
| cfg->ap_dfs = WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, |
| WMI_SERVICE_AP_DFS); |
| |
| /* Enable 11AC */ |
| cfg->en_11ac = WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, |
| WMI_SERVICE_11AC); |
| if (cfg->en_11ac) |
| gFwWlanFeatCaps |= (1 << DOT11AC); |
| |
| /* Proactive ARP response */ |
| gFwWlanFeatCaps |= (1 << WLAN_PERIODIC_TX_PTRN); |
| |
| /* Enable WOW */ |
| gFwWlanFeatCaps |= (1 << WOW); |
| |
| /* ARP offload */ |
| cfg->arp_offload = WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, |
| WMI_SERVICE_ARPNS_OFFLOAD); |
| |
| /* Adaptive early-rx */ |
| cfg->early_rx = WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, |
| WMI_SERVICE_EARLY_RX); |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| /* PNO offload */ |
| if (WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, WMI_SERVICE_NLO)) |
| cfg->pno_offload = TRUE; |
| #endif |
| |
| #ifdef FEATURE_WLAN_EXTSCAN |
| if (WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, |
| WMI_SERVICE_EXTSCAN)) { |
| gFwWlanFeatCaps |= (1 << EXTENDED_SCAN); |
| } |
| #endif |
| cfg->lte_coex_ant_share = WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, |
| WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); |
| cfg->per_band_chainmask_supp = WMI_SERVICE_IS_ENABLED( |
| wh->wmi_service_bitmap, |
| WMI_SERVICE_PER_BAND_CHAINMASK_SUPPORT); |
| wh->per_band_chainmask_supp = cfg->per_band_chainmask_supp; |
| #ifdef FEATURE_WLAN_TDLS |
| /* Enable TDLS */ |
| if (WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, WMI_SERVICE_TDLS)) { |
| cfg->en_tdls = 1; |
| gFwWlanFeatCaps |= (1 << TDLS); |
| } |
| /* Enable advanced TDLS features */ |
| if (WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, |
| WMI_SERVICE_TDLS_OFFCHAN)) { |
| cfg->en_tdls_offchan = 1; |
| gFwWlanFeatCaps |= (1 << TDLS_OFF_CHANNEL); |
| } |
| |
| cfg->en_tdls_uapsd_buf_sta = WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, |
| WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); |
| cfg->en_tdls_uapsd_sleep_sta = WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, |
| WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); |
| #endif |
| if (WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, WMI_SERVICE_BEACON_OFFLOAD)) |
| cfg->beacon_offload = TRUE; |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| /* Enable Roam Offload */ |
| cfg->en_roam_offload = WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, |
| WMI_SERVICE_ROAM_HO_OFFLOAD); |
| #endif |
| #ifdef WLAN_FEATURE_NAN |
| if (WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, WMI_SERVICE_NAN)) |
| gFwWlanFeatCaps |= (1 << NAN); |
| #endif |
| |
| if (WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, WMI_SERVICE_RTT)) |
| gFwWlanFeatCaps |= (1 << RTT); |
| |
| #ifdef SAP_AUTH_OFFLOAD |
| cfg->sap_auth_offload_service = |
| WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, |
| WMI_SERVICE_SAP_AUTH_OFFLOAD); |
| #endif |
| cfg->chain_mask_2g = wh->txrx_chainmask & 0xFF; |
| cfg->chain_mask_5g = (wh->txrx_chainmask >> 16 ) & 0xFF; |
| if (WMI_SERVICE_IS_ENABLED(wh->wmi_service_bitmap, |
| WMI_SERVICE_PEER_STATS_INFO)) |
| cfg->get_peer_info_enabled = 1; |
| } |
| |
| static inline void wma_update_target_ht_cap(tp_wma_handle wh, |
| struct hdd_tgt_ht_cap *cfg) |
| { |
| /* RX STBC */ |
| cfg->ht_rx_stbc = !!(wh->ht_cap_info & WMI_HT_CAP_RX_STBC); |
| |
| /* TX STBC */ |
| cfg->ht_tx_stbc = !!(wh->ht_cap_info & WMI_HT_CAP_TX_STBC); |
| |
| /* MPDU density */ |
| cfg->mpdu_density = wh->ht_cap_info & WMI_HT_CAP_MPDU_DENSITY; |
| |
| /* HT RX LDPC */ |
| cfg->ht_rx_ldpc = !!(wh->ht_cap_info & WMI_HT_CAP_LDPC); |
| |
| /* HT SGI */ |
| cfg->ht_sgi_20 = !!(wh->ht_cap_info & WMI_HT_CAP_HT20_SGI); |
| |
| cfg->ht_sgi_40 = !!(wh->ht_cap_info & WMI_HT_CAP_HT40_SGI); |
| |
| /* RF chains */ |
| cfg->num_rf_chains = wh->num_rf_chains; |
| |
| WMA_LOGD("%s: ht_cap_info - %x ht_rx_stbc - %d, ht_tx_stbc - %d, mpdu_density - %d ht_rx_ldpc - %d ht_sgi_20 - %d, ht_sgi_40 - %d num_rf_chains - %d ", |
| __func__, |
| wh->ht_cap_info, cfg->ht_rx_stbc, cfg->ht_tx_stbc, |
| cfg->mpdu_density, cfg->ht_rx_ldpc, cfg->ht_sgi_20, |
| cfg->ht_sgi_40, cfg->num_rf_chains); |
| |
| } |
| |
| #ifdef WLAN_FEATURE_11AC |
| static inline void wma_update_target_vht_cap(tp_wma_handle wh, |
| struct hdd_tgt_vht_cap *cfg) |
| { |
| /* Max MPDU length */ |
| if (wh->vht_cap_info & IEEE80211_VHTCAP_MAX_MPDU_LEN_3839) |
| cfg->vht_max_mpdu = 0; |
| else if (wh->vht_cap_info & IEEE80211_VHTCAP_MAX_MPDU_LEN_7935) |
| cfg->vht_max_mpdu = 1; |
| else if (wh->vht_cap_info & IEEE80211_VHTCAP_MAX_MPDU_LEN_11454) |
| cfg->vht_max_mpdu = 2; |
| else |
| cfg->vht_max_mpdu = 0; |
| |
| /* supported channel width */ |
| if (wh->vht_cap_info & IEEE80211_VHTCAP_SUP_CHAN_WIDTH_80) |
| cfg->supp_chan_width = 1 << eHT_CHANNEL_WIDTH_80MHZ; |
| |
| else if (wh->vht_cap_info & IEEE80211_VHTCAP_SUP_CHAN_WIDTH_160) |
| cfg->supp_chan_width = 1 << eHT_CHANNEL_WIDTH_160MHZ; |
| |
| else if (wh->vht_cap_info & IEEE80211_VHTCAP_SUP_CHAN_WIDTH_80_160) { |
| cfg->supp_chan_width = 1 << eHT_CHANNEL_WIDTH_80MHZ; |
| cfg->supp_chan_width |= 1 << eHT_CHANNEL_WIDTH_160MHZ; |
| } |
| |
| else |
| cfg->supp_chan_width = 0; |
| |
| /* LDPC capability */ |
| cfg->vht_rx_ldpc = wh->vht_cap_info & IEEE80211_VHTCAP_RX_LDPC; |
| |
| /* Guard interval */ |
| cfg->vht_short_gi_80 = wh->vht_cap_info & IEEE80211_VHTCAP_SHORTGI_80; |
| cfg->vht_short_gi_160 = wh->vht_cap_info & IEEE80211_VHTCAP_SHORTGI_160; |
| |
| /* TX STBC capability */ |
| cfg->vht_tx_stbc = wh->vht_cap_info & IEEE80211_VHTCAP_TX_STBC; |
| |
| /* RX STBC capability */ |
| cfg->vht_rx_stbc = wh->vht_cap_info & IEEE80211_VHTCAP_RX_STBC; |
| |
| cfg->vht_max_ampdu_len_exp = (wh->vht_cap_info & |
| IEEE80211_VHTCAP_MAX_AMPDU_LEN_EXP) |
| >> IEEE80211_VHTCAP_MAX_AMPDU_LEN_EXP_S; |
| |
| /* SU beamformer cap */ |
| cfg->vht_su_bformer = wh->vht_cap_info & IEEE80211_VHTCAP_SU_BFORMER; |
| |
| /* SU beamformee cap */ |
| cfg->vht_su_bformee = wh->vht_cap_info & IEEE80211_VHTCAP_SU_BFORMEE; |
| |
| /* MU beamformer cap */ |
| cfg->vht_mu_bformer = wh->vht_cap_info & IEEE80211_VHTCAP_MU_BFORMER; |
| |
| /* MU beamformee cap */ |
| cfg->vht_mu_bformee = wh->vht_cap_info & IEEE80211_VHTCAP_MU_BFORMEE; |
| |
| /* VHT Max AMPDU Len exp */ |
| cfg->vht_max_ampdu_len_exp = wh->vht_cap_info & |
| IEEE80211_VHTCAP_MAX_AMPDU_LEN_EXP; |
| |
| /* VHT TXOP PS cap */ |
| cfg->vht_txop_ps = wh->vht_cap_info & IEEE80211_VHTCAP_TXOP_PS; |
| |
| WMA_LOGD("%s: max_mpdu %d supp_chan_width %x rx_ldpc %x short_gi_80 %x tx_stbc %x rx_stbc %x txop_ps %x su_bformee %x mu_bformee %x max_ampdu_len_exp %d", |
| __func__, cfg->vht_max_mpdu, cfg->supp_chan_width, |
| cfg->vht_rx_ldpc, cfg->vht_short_gi_80, cfg->vht_tx_stbc, |
| cfg->vht_rx_stbc, cfg->vht_txop_ps, cfg->vht_su_bformee, |
| cfg->vht_mu_bformee, cfg->vht_max_ampdu_len_exp); |
| } |
| #endif /* #ifdef WLAN_FEATURE_11AC */ |
| |
| #ifdef FEATURE_WLAN_RA_FILTERING |
| static void wma_update_ra_rate_limit(tp_wma_handle wma_handle, |
| struct hdd_tgt_cfg *cfg) |
| { |
| cfg->is_ra_rate_limit_enabled = wma_handle->IsRArateLimitEnabled; |
| } |
| #else |
| static void wma_update_ra_rate_limit(tp_wma_handle wma_handle, |
| struct hdd_tgt_cfg *cfg) |
| { |
| } |
| #endif |
| |
| |
| static void wma_update_hdd_cfg(tp_wma_handle wma_handle) |
| { |
| struct hdd_tgt_cfg hdd_tgt_cfg; |
| void *hdd_ctx = vos_get_context(VOS_MODULE_ID_HDD, |
| wma_handle->vos_context); |
| |
| hdd_tgt_cfg.reg_domain = wma_handle->reg_cap.eeprom_rd; |
| hdd_tgt_cfg.eeprom_rd_ext = wma_handle->reg_cap.eeprom_rd_ext; |
| hdd_tgt_cfg.sub_20_support = wma_handle->sub_20_support; |
| |
| switch (wma_handle->phy_capability) { |
| case WMI_11G_CAPABILITY: |
| case WMI_11NG_CAPABILITY: |
| hdd_tgt_cfg.band_cap = eCSR_BAND_24; |
| break; |
| case WMI_11A_CAPABILITY: |
| case WMI_11NA_CAPABILITY: |
| case WMI_11AC_CAPABILITY: |
| hdd_tgt_cfg.band_cap = eCSR_BAND_5G; |
| break; |
| case WMI_11AG_CAPABILITY: |
| case WMI_11NAG_CAPABILITY: |
| default: |
| hdd_tgt_cfg.band_cap = eCSR_BAND_ALL; |
| } |
| |
| hdd_tgt_cfg.max_intf_count = wma_handle->wlan_resource_config.num_vdevs; |
| |
| adf_os_mem_copy(hdd_tgt_cfg.hw_macaddr.bytes, wma_handle->hwaddr, |
| ATH_MAC_LEN); |
| |
| wma_update_target_services(wma_handle, &hdd_tgt_cfg.services); |
| wma_update_target_ht_cap(wma_handle, &hdd_tgt_cfg.ht_cap); |
| #ifdef WLAN_FEATURE_11AC |
| wma_update_target_vht_cap(wma_handle, &hdd_tgt_cfg.vht_cap); |
| #endif /* #ifdef WLAN_FEATURE_11AC */ |
| |
| hdd_tgt_cfg.target_fw_version = wma_handle->target_fw_version; |
| #ifdef WLAN_FEATURE_LPSS |
| hdd_tgt_cfg.lpss_support = wma_handle->lpss_support; |
| #endif |
| hdd_tgt_cfg.ap_arpns_support = wma_handle->ap_arpns_support; |
| hdd_tgt_cfg.fine_time_measurement_cap = |
| wma_handle->fine_time_measurement_cap; |
| hdd_tgt_cfg.wmi_max_len = wmi_get_max_msg_len(wma_handle->wmi_handle) |
| - WMI_TLV_HEADROOM; |
| hdd_tgt_cfg.bpf_enabled = wma_handle->bpf_enabled; |
| wma_update_ra_rate_limit(wma_handle, &hdd_tgt_cfg); |
| wma_update_hdd_cfg_ndp(wma_handle, &hdd_tgt_cfg); |
| wma_setup_egap_support(&hdd_tgt_cfg, wma_handle); |
| hdd_tgt_cfg.max_mc_addr_list = |
| wma_handle->wlan_resource_config.num_multicast_filter_entries; |
| wma_handle->tgt_cfg_update_cb(hdd_ctx, &hdd_tgt_cfg); |
| } |
| static wmi_buf_t wma_setup_wmi_init_msg(tp_wma_handle wma_handle, |
| wmi_service_ready_event_fixed_param *ev, |
| WMI_SERVICE_READY_EVENTID_param_tlvs *param_buf, |
| v_SIZE_t *len) |
| { |
| wmi_buf_t buf; |
| wmi_init_cmd_fixed_param *cmd; |
| wlan_host_mem_req *ev_mem_reqs; |
| wmi_abi_version my_vers; |
| int num_whitelist; |
| u_int8_t *buf_ptr; |
| wmi_resource_config *resource_cfg; |
| wlan_host_memory_chunk *host_mem_chunks; |
| u_int32_t mem_chunk_len = 0; |
| u_int16_t idx; |
| u_int32_t num_units; |
| |
| *len = sizeof(*cmd) + sizeof(wmi_resource_config) + WMI_TLV_HDR_SIZE; |
| mem_chunk_len = (sizeof(wlan_host_memory_chunk) * MAX_MEM_CHUNKS); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, *len + mem_chunk_len); |
| if (!buf) { |
| WMA_LOGP("%s: wmi_buf_alloc failed", __func__); |
| return NULL; |
| } |
| |
| ev_mem_reqs = param_buf->mem_reqs; |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_init_cmd_fixed_param *) buf_ptr; |
| resource_cfg = (wmi_resource_config *) (buf_ptr + sizeof(*cmd)); |
| host_mem_chunks = (wlan_host_memory_chunk*) |
| (buf_ptr + sizeof(*cmd) + sizeof(wmi_resource_config) |
| + WMI_TLV_HDR_SIZE); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_init_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_init_cmd_fixed_param)); |
| |
| *resource_cfg = wma_handle->wlan_resource_config; |
| WMITLV_SET_HDR(&resource_cfg->tlv_header, |
| WMITLV_TAG_STRUC_wmi_resource_config, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_resource_config)); |
| |
| /* allocate memory requested by FW */ |
| if (ev->num_mem_reqs > WMI_MAX_MEM_REQS) { |
| VOS_ASSERT(0); |
| wmi_buf_free(buf); |
| return NULL; |
| } |
| |
| cmd->num_host_mem_chunks = 0; |
| for(idx = 0; idx < ev->num_mem_reqs; ++idx) { |
| num_units = ev_mem_reqs[idx].num_units; |
| if (ev_mem_reqs[idx].num_unit_info & NUM_UNITS_IS_NUM_PEERS) { |
| /* |
| * number of units to allocate is number |
| * of peers, 1 extra for self peer on |
| * target. this needs to be fied, host |
| * and target can get out of sync |
| */ |
| num_units = resource_cfg->num_peers + 1; |
| } |
| WMA_LOGD("idx %d req %d num_units %d num_unit_info %d unit size %d actual units %d ", |
| idx, ev_mem_reqs[idx].req_id, |
| ev_mem_reqs[idx].num_units, |
| ev_mem_reqs[idx].num_unit_info, |
| ev_mem_reqs[idx].unit_size, |
| num_units); |
| wma_alloc_host_mem(wma_handle, ev_mem_reqs[idx].req_id, |
| num_units, ev_mem_reqs[idx].unit_size); |
| } |
| for(idx = 0; idx < wma_handle->num_mem_chunks; ++idx) { |
| WMITLV_SET_HDR(&(host_mem_chunks[idx].tlv_header), |
| WMITLV_TAG_STRUC_wlan_host_memory_chunk, |
| WMITLV_GET_STRUCT_TLVLEN(wlan_host_memory_chunk)); |
| host_mem_chunks[idx].ptr = wma_handle->mem_chunks[idx].paddr; |
| host_mem_chunks[idx].size = wma_handle->mem_chunks[idx].len; |
| host_mem_chunks[idx].req_id = |
| wma_handle->mem_chunks[idx].req_id; |
| WMA_LOGD("chunk %d len %d requested ,ptr 0x%x ", |
| idx, host_mem_chunks[idx].size, |
| host_mem_chunks[idx].ptr) ; |
| } |
| cmd->num_host_mem_chunks = wma_handle->num_mem_chunks; |
| *len += (wma_handle->num_mem_chunks * sizeof(wlan_host_memory_chunk)); |
| WMITLV_SET_HDR((buf_ptr + sizeof(*cmd) + sizeof(wmi_resource_config)), |
| WMITLV_TAG_ARRAY_STRUC, |
| (sizeof(wlan_host_memory_chunk) * |
| wma_handle->num_mem_chunks)); |
| vos_mem_copy(&wma_handle->target_abi_vers, |
| ¶m_buf->fixed_param->fw_abi_vers, |
| sizeof(wmi_abi_version)); |
| num_whitelist = sizeof(version_whitelist) / |
| sizeof(wmi_whitelist_version_info); |
| my_vers.abi_version_0 = WMI_ABI_VERSION_0; |
| my_vers.abi_version_1 = WMI_ABI_VERSION_1; |
| my_vers.abi_version_ns_0 = WMI_ABI_VERSION_NS_0; |
| my_vers.abi_version_ns_1 = WMI_ABI_VERSION_NS_1; |
| my_vers.abi_version_ns_2 = WMI_ABI_VERSION_NS_2; |
| my_vers.abi_version_ns_3 = WMI_ABI_VERSION_NS_3; |
| |
| wmi_cmp_and_set_abi_version(num_whitelist, version_whitelist, |
| &my_vers, ¶m_buf->fixed_param->fw_abi_vers, |
| &cmd->host_abi_vers); |
| |
| WMA_LOGD("%s: INIT_CMD version: %d, %d, 0x%x, 0x%x, 0x%x, 0x%x", |
| __func__, WMI_VER_GET_MAJOR(cmd->host_abi_vers.abi_version_0), |
| WMI_VER_GET_MINOR(cmd->host_abi_vers.abi_version_0), |
| cmd->host_abi_vers.abi_version_ns_0, |
| cmd->host_abi_vers.abi_version_ns_1, |
| cmd->host_abi_vers.abi_version_ns_2, |
| cmd->host_abi_vers.abi_version_ns_3); |
| |
| vos_mem_copy(&wma_handle->final_abi_vers, &cmd->host_abi_vers, |
| sizeof(wmi_abi_version)); |
| return buf; |
| } |
| |
| /** |
| * wma_send_time_stamp_sync_cmd() - timer callback send timestamp to |
| * firmware to sync with host. |
| * @wma_handle: wma handle |
| * |
| * Return: void |
| */ |
| static void wma_send_time_stamp_sync_cmd(void *data) |
| { |
| tp_wma_handle wma_handle; |
| wmi_buf_t buf; |
| WMI_DBGLOG_TIME_STAMP_SYNC_CMD_fixed_param *time_stamp; |
| A_STATUS status = A_OK; |
| int len; |
| VOS_STATUS vos_status; |
| unsigned long time_ms; |
| |
| wma_handle = (tp_wma_handle) data; |
| len = sizeof(*time_stamp); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP(FL("wmi_buf_alloc failed")); |
| return; |
| } |
| |
| time_stamp = |
| (WMI_DBGLOG_TIME_STAMP_SYNC_CMD_fixed_param *) |
| (wmi_buf_data(buf)); |
| WMITLV_SET_HDR(&time_stamp->tlv_header, |
| WMITLV_TAG_STRUC_wmi_dbglog_time_stamp_sync_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| WMI_DBGLOG_TIME_STAMP_SYNC_CMD_fixed_param)); |
| |
| time_ms = vos_get_time_of_the_day_ms(); |
| time_stamp->mode = WMI_TIME_STAMP_SYNC_MODE_MS; |
| time_stamp->time_stamp_low = time_ms & |
| WMA_FW_TIME_STAMP_LOW_MASK; |
| /* |
| * Send time_stamp_high 0 as the time converted from HR:MIN:SEC:MS to ms |
| * wont exceed 27 bit |
| */ |
| time_stamp->time_stamp_high = 0; |
| WMA_LOGD(FL("WMA --> DBGLOG_TIME_STAMP_SYNC_CMDID mode %d time_stamp low %d high %d"), |
| time_stamp->mode, time_stamp->time_stamp_low, |
| time_stamp->time_stamp_high); |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| len, WMI_DBGLOG_TIME_STAMP_SYNC_CMDID); |
| if (status != EOK) { |
| WMA_LOGE("Failed to send WMI_DBGLOG_TIME_STAMP_SYNC_CMDID command"); |
| wmi_buf_free(buf); |
| } |
| |
| /* Start/Restart the timer */ |
| vos_status = vos_timer_start(&wma_handle->wma_fw_time_sync_timer, |
| WMA_FW_TIME_SYNC_TIMER); |
| if (vos_status != VOS_STATUS_SUCCESS) |
| WMA_LOGE("Failed to start the firmware time sync timer"); |
| } |
| |
| #ifdef FEATURE_WLAN_RA_FILTERING |
| static void wma_update_ra_limit(tp_wma_handle wma_handle) |
| { |
| if (wma_handle->bpf_enabled) |
| wma_handle->IsRArateLimitEnabled = false; |
| } |
| #else |
| static void wma_update_ra__limit(tp_wma_handle handle) |
| { |
| } |
| #endif |
| |
| |
| /* Process service ready event and send wmi_init command */ |
| v_VOID_t wma_rx_service_ready_event(WMA_HANDLE handle, void *cmd_param_info) |
| { |
| wmi_buf_t buf; |
| v_SIZE_t len; |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| struct wma_target_cap target_cap; |
| WMI_SERVICE_READY_EVENTID_param_tlvs *param_buf; |
| wmi_service_ready_event_fixed_param *ev; |
| int status; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| |
| param_buf = (WMI_SERVICE_READY_EVENTID_param_tlvs *) cmd_param_info; |
| if (!(handle && param_buf)) { |
| WMA_LOGP("%s: Invalid arguments", __func__); |
| return; |
| } |
| |
| ev = param_buf->fixed_param; |
| if (!ev) { |
| WMA_LOGP("%s: Invalid buffer", __func__); |
| return; |
| } |
| |
| WMA_LOGA("WMA <-- WMI_SERVICE_READY_EVENTID"); |
| if (ev->num_dbs_hw_modes > param_buf->num_wlan_dbs_hw_mode_list) { |
| WMA_LOGE("FW dbs_hw_mode entry %d more than value %d in TLV hdr", |
| ev->num_dbs_hw_modes, |
| param_buf->num_wlan_dbs_hw_mode_list); |
| return; |
| } |
| |
| wma_handle->phy_capability = ev->phy_capability; |
| wma_handle->max_frag_entry = ev->max_frag_entry; |
| wma_handle->num_rf_chains = ev->num_rf_chains; |
| vos_mem_copy(&wma_handle->reg_cap, param_buf->hal_reg_capabilities, |
| sizeof(HAL_REG_CAPABILITIES)); |
| wma_handle->ht_cap_info = ev->ht_cap_info; |
| #ifdef WLAN_FEATURE_11AC |
| wma_handle->vht_cap_info = ev->vht_cap_info; |
| wma_handle->vht_supp_mcs = ev->vht_supp_mcs; |
| #endif |
| wma_handle->txrx_chainmask = ev->txrx_chainmask; |
| |
| wma_handle->target_fw_version = ev->fw_build_vers; |
| wma_handle->fine_time_measurement_cap = ev->wmi_fw_sub_feat_caps; |
| WMA_LOGD(FL("FW fine time meas cap: 0x%x"), ev->wmi_fw_sub_feat_caps); |
| WMA_LOGE("%s: Firmware build version : %08x", |
| __func__, ev->fw_build_vers); |
| |
| if (ev->hw_bd_id) { |
| wma_handle->hw_bd_id = ev->hw_bd_id; |
| vos_mem_copy(wma_handle->hw_bd_info, |
| ev->hw_bd_info, sizeof(ev->hw_bd_info)); |
| |
| WMA_LOGE("%s: Board version: %x.%x", |
| __func__, |
| wma_handle->hw_bd_info[0], |
| wma_handle->hw_bd_info[1]); |
| } else { |
| wma_handle->hw_bd_id = 0; |
| vos_mem_zero(wma_handle->hw_bd_info, |
| sizeof(wma_handle->hw_bd_info)); |
| WMA_LOGE("%s: Board version is unknown!", __func__); |
| } |
| |
| /* TODO: Recheck below line to dump service ready event */ |
| /* dbg_print_wmi_service_11ac(ev); */ |
| |
| /* wmi service is ready */ |
| vos_mem_copy(wma_handle->wmi_service_bitmap, |
| param_buf->wmi_service_bitmap, |
| sizeof(wma_handle->wmi_service_bitmap)); |
| /* SWBA event handler for beacon transmission */ |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_HOST_SWBA_EVENTID, |
| wma_beacon_swba_handler); |
| if (status) { |
| WMA_LOGE("Failed to register swba beacon event cb"); |
| return; |
| } |
| |
| #ifdef WLAN_FEATURE_LPSS |
| wma_handle->lpss_support = |
| WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_LPASS); |
| #endif |
| /* |
| * This Service bit is added to check for ARP/NS offload |
| * support for LL or HL targets |
| */ |
| wma_handle->ap_arpns_support = |
| WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_AP_ARPNS_OFFLOAD); |
| wma_handle->bpf_enabled = (wma_handle->bpf_packet_filter_enable && |
| WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_BPF_OFFLOAD)); |
| wma_update_ra_limit(wma_handle); |
| if (WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_CSA_OFFLOAD)) { |
| WMA_LOGD("%s: FW support CSA offload capability", __func__); |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_CSA_HANDLING_EVENTID, |
| wma_csa_offload_handler); |
| if (status) { |
| WMA_LOGE("Failed to register CSA offload event cb"); |
| return; |
| } |
| } |
| |
| #ifdef WLAN_FEATURE_GTK_OFFLOAD |
| if (WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_GTK_OFFLOAD)) { |
| status = wmi_unified_register_event_handler( |
| wma_handle->wmi_handle, |
| WMI_GTK_OFFLOAD_STATUS_EVENTID, |
| wma_gtk_offload_status_event); |
| if (status) { |
| WMA_LOGE("Failed to register GTK offload event cb"); |
| return; |
| } |
| } |
| #endif |
| |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_P2P_NOA_EVENTID, |
| wma_p2p_noa_event_handler); |
| if (status) { |
| WMA_LOGE("Failed to register WMI_P2P_NOA_EVENTID callback"); |
| return; |
| } |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_TBTTOFFSET_UPDATE_EVENTID, |
| wma_tbttoffset_update_event_handler); |
| if (status) { |
| WMA_LOGE("Failed to register WMI_TBTTOFFSET_UPDATE_EVENTID callback"); |
| return; |
| } |
| |
| /* register the Enhanced Green AP event handler */ |
| wma_register_egap_event_handle(wma_handle); |
| |
| /* Initialize the log supported event handler */ |
| status = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_DIAG_EVENT_LOG_SUPPORTED_EVENTID, |
| wma_log_supported_evt_handler); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to register log supported event cb"); |
| return; |
| } |
| |
| ol_tx_mark_first_wakeup_packet( |
| WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_MARK_FIRST_WAKEUP_PACKET)); |
| |
| wma_handle->nan_datapath_enabled = |
| WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_NAN_DATA); |
| vos_mem_copy(target_cap.wmi_service_bitmap, |
| param_buf->wmi_service_bitmap, |
| sizeof(wma_handle->wmi_service_bitmap)); |
| target_cap.wlan_resource_config = wma_handle->wlan_resource_config; |
| wma_update_fw_config(wma_handle, &target_cap); |
| vos_mem_copy(wma_handle->wmi_service_bitmap, target_cap.wmi_service_bitmap, |
| sizeof(wma_handle->wmi_service_bitmap)); |
| wma_handle->wlan_resource_config = target_cap.wlan_resource_config; |
| |
| buf = wma_setup_wmi_init_msg(wma_handle, ev, param_buf, &len); |
| if (!buf) { |
| WMA_LOGE("Failed to setup buffer for wma init command"); |
| return; |
| } |
| |
| WMA_LOGA("WMA --> WMI_INIT_CMDID"); |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, WMI_INIT_CMDID); |
| if (status != EOK) { |
| WMA_LOGE("Failed to send WMI_INIT_CMDID command"); |
| wmi_buf_free(buf); |
| return; |
| } |
| } |
| |
| /* function : wma_rx_ready_event |
| * Description : |
| * Args : |
| * Retruns : |
| */ |
| v_VOID_t wma_rx_ready_event(WMA_HANDLE handle, void *cmd_param_info) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| WMI_READY_EVENTID_param_tlvs *param_buf = NULL; |
| wmi_ready_event_fixed_param *ev = NULL; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| |
| param_buf = (WMI_READY_EVENTID_param_tlvs *) cmd_param_info; |
| if (!(wma_handle && param_buf)) { |
| WMA_LOGP("%s: Invalid arguments", __func__); |
| VOS_ASSERT(0); |
| return; |
| } |
| |
| WMA_LOGA("WMA <-- WMI_READY_EVENTID"); |
| |
| ev = param_buf->fixed_param; |
| |
| wma_handle->sub_20_support = |
| WMI_SERVICE_IS_ENABLED(wma_handle->wmi_service_bitmap, |
| WMI_SERVICE_HALF_RATE_QUARTER_RATE_SUPPORT); |
| |
| /* Indicate to the waiting thread that the ready |
| * event was received */ |
| wma_handle->wmi_ready = TRUE; |
| wma_handle->wlan_init_status = ev->status; |
| |
| /* |
| * We need to check the WMI versions and make sure both |
| * host and fw are compatible. |
| */ |
| if (!wmi_versions_are_compatible(&wma_handle->final_abi_vers, |
| &ev->fw_abi_vers)) { |
| /* |
| * Error: Our host version and the given firmware version |
| * are incompatible. |
| */ |
| WMA_LOGE("%s: Error: Incompatible WMI version." |
| "Host: %d,%d,0x%x 0x%x 0x%x 0x%x, FW: %d,%d,0x%x 0x%x 0x%x 0x%x", |
| __func__, |
| WMI_VER_GET_MAJOR( |
| wma_handle->final_abi_vers.abi_version_0), |
| WMI_VER_GET_MINOR( |
| wma_handle->final_abi_vers.abi_version_0), |
| wma_handle->final_abi_vers.abi_version_ns_0, |
| wma_handle->final_abi_vers.abi_version_ns_1, |
| wma_handle->final_abi_vers.abi_version_ns_2, |
| wma_handle->final_abi_vers.abi_version_ns_3, |
| WMI_VER_GET_MAJOR(ev->fw_abi_vers.abi_version_0), |
| WMI_VER_GET_MINOR(ev->fw_abi_vers.abi_version_0), |
| ev->fw_abi_vers.abi_version_ns_0, |
| ev->fw_abi_vers.abi_version_ns_1, |
| ev->fw_abi_vers.abi_version_ns_2, |
| ev->fw_abi_vers.abi_version_ns_3); |
| if (wma_handle->wlan_init_status == WLAN_INIT_STATUS_SUCCESS) { |
| /* Failed this connection to FW */ |
| wma_handle->wlan_init_status = |
| WLAN_INIT_STATUS_GEN_FAILED; |
| } |
| } |
| vos_mem_copy(&wma_handle->final_abi_vers, &ev->fw_abi_vers, |
| sizeof(wmi_abi_version)); |
| vos_mem_copy(&wma_handle->target_abi_vers, &ev->fw_abi_vers, |
| sizeof(wmi_abi_version)); |
| |
| /* copy the mac addr */ |
| WMI_MAC_ADDR_TO_CHAR_ARRAY (&ev->mac_addr, wma_handle->myaddr); |
| WMI_MAC_ADDR_TO_CHAR_ARRAY (&ev->mac_addr, wma_handle->hwaddr); |
| |
| wma_update_hdd_cfg(wma_handle); |
| |
| vos_event_set(&wma_handle->wma_ready_event); |
| |
| WMA_LOGD("Exit"); |
| } |
| |
| int wma_set_peer_param(void *wma_ctx, u_int8_t *peer_addr, u_int32_t param_id, |
| u_int32_t param_value, u_int32_t vdev_id) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) wma_ctx; |
| wmi_peer_set_param_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| int err; |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, sizeof(*cmd)); |
| if (!buf) { |
| WMA_LOGE("Failed to allocate buffer to send set_param cmd"); |
| return -ENOMEM; |
| } |
| cmd = (wmi_peer_set_param_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_peer_set_param_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_peer_set_param_cmd_fixed_param)); |
| cmd->vdev_id = vdev_id; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(peer_addr, &cmd->peer_macaddr); |
| cmd->param_id = param_id; |
| cmd->param_value = param_value; |
| err = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, |
| sizeof(wmi_peer_set_param_cmd_fixed_param), |
| WMI_PEER_SET_PARAM_CMDID); |
| if (err) { |
| WMA_LOGE("Failed to send set_param cmd"); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static void |
| wma_decap_to_8023 (adf_nbuf_t msdu, struct wma_decap_info_t *info) |
| { |
| struct llc_snap_hdr_t *llc_hdr; |
| u_int16_t ether_type; |
| u_int16_t l2_hdr_space; |
| struct ieee80211_qosframe_addr4 *wh; |
| u_int8_t local_buf[ETHERNET_HDR_LEN]; |
| u_int8_t *buf; |
| struct ethernet_hdr_t *ethr_hdr; |
| |
| buf = (u_int8_t *)adf_nbuf_data(msdu); |
| llc_hdr = (struct llc_snap_hdr_t *)buf; |
| ether_type = (llc_hdr->ethertype[0] << 8)|llc_hdr->ethertype[1]; |
| /* do llc remove if needed */ |
| l2_hdr_space = 0; |
| if (IS_SNAP(llc_hdr)) { |
| if (IS_BTEP(llc_hdr)) { |
| /* remove llc*/ |
| l2_hdr_space += sizeof(struct llc_snap_hdr_t); |
| llc_hdr = NULL; |
| } else if (IS_RFC1042(llc_hdr)) { |
| if (!(ether_type == ETHERTYPE_AARP || |
| ether_type == ETHERTYPE_IPX)) { |
| /* remove llc*/ |
| l2_hdr_space += sizeof(struct llc_snap_hdr_t); |
| llc_hdr = NULL; |
| } |
| } |
| } |
| if (l2_hdr_space > ETHERNET_HDR_LEN) { |
| buf = adf_nbuf_pull_head(msdu, l2_hdr_space - ETHERNET_HDR_LEN); |
| } else if (l2_hdr_space < ETHERNET_HDR_LEN) { |
| buf = adf_nbuf_push_head(msdu, ETHERNET_HDR_LEN - l2_hdr_space); |
| } |
| |
| /* mpdu hdr should be present in info,re-create ethr_hdr based on mpdu hdr*/ |
| wh = (struct ieee80211_qosframe_addr4 *)info->hdr; |
| ethr_hdr = (struct ethernet_hdr_t *)local_buf; |
| switch (wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) { |
| case IEEE80211_FC1_DIR_NODS: |
| adf_os_mem_copy(ethr_hdr->dest_addr, wh->i_addr1, |
| ETHERNET_ADDR_LEN); |
| adf_os_mem_copy(ethr_hdr->src_addr, wh->i_addr2, |
| ETHERNET_ADDR_LEN); |
| break; |
| case IEEE80211_FC1_DIR_TODS: |
| adf_os_mem_copy(ethr_hdr->dest_addr, wh->i_addr3, |
| ETHERNET_ADDR_LEN); |
| adf_os_mem_copy(ethr_hdr->src_addr, wh->i_addr2, |
| ETHERNET_ADDR_LEN); |
| break; |
| case IEEE80211_FC1_DIR_FROMDS: |
| adf_os_mem_copy(ethr_hdr->dest_addr, wh->i_addr1, |
| ETHERNET_ADDR_LEN); |
| adf_os_mem_copy(ethr_hdr->src_addr, wh->i_addr3, |
| ETHERNET_ADDR_LEN); |
| break; |
| case IEEE80211_FC1_DIR_DSTODS: |
| adf_os_mem_copy(ethr_hdr->dest_addr, wh->i_addr3, |
| ETHERNET_ADDR_LEN); |
| adf_os_mem_copy(ethr_hdr->src_addr, wh->i_addr4, |
| ETHERNET_ADDR_LEN); |
| break; |
| } |
| |
| if (llc_hdr == NULL) { |
| ethr_hdr->ethertype[0] = (ether_type >> 8) & 0xff; |
| ethr_hdr->ethertype[1] = (ether_type) & 0xff; |
| } else { |
| u_int32_t pktlen = adf_nbuf_len(msdu) - sizeof(ethr_hdr->ethertype); |
| ether_type = (u_int16_t)pktlen; |
| ether_type = adf_nbuf_len(msdu) - sizeof(struct ethernet_hdr_t); |
| ethr_hdr->ethertype[0] = (ether_type >> 8) & 0xff; |
| ethr_hdr->ethertype[1] = (ether_type) & 0xff; |
| } |
| adf_os_mem_copy(buf, ethr_hdr, ETHERNET_HDR_LEN); |
| } |
| |
| static int32_t |
| wma_ieee80211_hdrsize(const void *data) |
| { |
| const struct ieee80211_frame *wh = (const struct ieee80211_frame *)data; |
| int32_t size = sizeof(struct ieee80211_frame); |
| |
| if ((wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) == IEEE80211_FC1_DIR_DSTODS) |
| size += IEEE80211_ADDR_LEN; |
| if (IEEE80211_QOS_HAS_SEQ(wh)) |
| size += sizeof(u_int16_t); |
| return size; |
| } |
| |
| /** |
| * WDA_TxPacket - Sends Tx Frame to TxRx |
| * This function sends the frame corresponding to the |
| * given vdev id. |
| * This is blocking call till the downloading of frame is complete. |
| */ |
| VOS_STATUS WDA_TxPacket(void *wma_context, void *tx_frame, u_int16_t frmLen, |
| eFrameType frmType, eFrameTxDir txDir, u_int8_t tid, |
| pWDATxRxCompFunc tx_frm_download_comp_cb, void *pData, |
| pWDAAckFnTxComp tx_frm_ota_comp_cb, u_int8_t tx_flag, |
| u_int8_t vdev_id, bool tdlsFlag) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle)(wma_context); |
| int32_t status; |
| VOS_STATUS vos_status = VOS_STATUS_SUCCESS; |
| int32_t is_high_latency; |
| ol_txrx_vdev_handle txrx_vdev; |
| ol_txrx_pdev_handle txrx_pdev; |
| pVosContextType vos_handle; |
| enum frame_index tx_frm_index = |
| GENERIC_NODOWNLD_NOACK_COMP_INDEX; |
| tpSirMacFrameCtl pFc = (tpSirMacFrameCtl)(adf_nbuf_data(tx_frame)); |
| u_int8_t use_6mbps = 0; |
| u_int8_t downld_comp_required = 0; |
| u_int16_t chanfreq; |
| #ifdef WLAN_FEATURE_11W |
| tANI_U8 *pFrame = NULL; |
| void *pPacket = NULL; |
| u_int16_t newFrmLen = 0; |
| #endif /* WLAN_FEATURE_11W */ |
| struct wma_txrx_node *iface; |
| tpAniSirGlobal pMac; |
| #ifdef QCA_PKT_PROTO_TRACE |
| v_U8_t proto_type = 0; |
| #endif |
| |
| if (NULL == wma_handle) |
| { |
| WMA_LOGE("wma_handle is NULL"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| iface = &wma_handle->interfaces[vdev_id]; |
| pMac = (tpAniSirGlobal)vos_get_context(VOS_MODULE_ID_PE, |
| wma_handle->vos_context); |
| /* Get the vdev handle from vdev id */ |
| txrx_vdev = wma_handle->interfaces[vdev_id].handle; |
| vos_handle = (pVosContextType)(wma_handle->vos_context); |
| /* Get the txRx Pdev handle */ |
| txrx_pdev = (ol_txrx_pdev_handle)(vos_handle->pdev_txrx_ctx); |
| |
| if(!txrx_vdev) { |
| WMA_LOGE("TxRx Vdev Handle is NULL"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| #if defined(CONFIG_HL_SUPPORT) && defined(FEATURE_WLAN_TDLS) |
| txrx_vdev->hlTdlsFlag = false; |
| #endif |
| |
| if (frmType >= HAL_TXRX_FRM_MAX) { |
| WMA_LOGE("Invalid Frame Type Fail to send Frame"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| if(!pMac) { |
| WMA_LOGE("pMac Handle is NULL"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| /* |
| * Currently only support to |
| * send 80211 Mgmt and 80211 Data are added. |
| */ |
| if (!((frmType == HAL_TXRX_FRM_802_11_MGMT) || |
| (frmType == HAL_TXRX_FRM_802_11_DATA))) { |
| WMA_LOGE("No Support to send other frames except 802.11 Mgmt/Data"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| #ifdef WLAN_FEATURE_11W |
| if ((iface && iface->rmfEnabled) && |
| (frmType == HAL_TXRX_FRM_802_11_MGMT) && |
| (pFc->subType == SIR_MAC_MGMT_DISASSOC || |
| pFc->subType == SIR_MAC_MGMT_DEAUTH || |
| pFc->subType == SIR_MAC_MGMT_ACTION)) { |
| struct ieee80211_frame *wh = |
| (struct ieee80211_frame *)adf_nbuf_data(tx_frame); |
| if(!IEEE80211_IS_BROADCAST(wh->i_addr1) && |
| !IEEE80211_IS_MULTICAST(wh->i_addr1)) { |
| if (pFc->wep) { |
| /* Allocate extra bytes for privacy header and trailer */ |
| newFrmLen = frmLen + IEEE80211_CCMP_HEADERLEN + |
| IEEE80211_CCMP_MICLEN; |
| vos_status = palPktAlloc( pMac->hHdd, |
| HAL_TXRX_FRM_802_11_MGMT, |
| ( tANI_U16 )newFrmLen, |
| ( void** ) &pFrame, |
| ( void** ) &pPacket ); |
| |
| if (!VOS_IS_STATUS_SUCCESS(vos_status)) { |
| WMA_LOGP("%s: Failed to allocate %d bytes for RMF status " |
| "code (%x)", __func__, newFrmLen, vos_status); |
| /* Free the original packet memory */ |
| palPktFree( pMac->hHdd, HAL_TXRX_FRM_802_11_MGMT, |
| ( void* ) pData, ( void* ) tx_frame ); |
| goto error; |
| } |
| |
| /* |
| * Initialize the frame with 0's and only fill |
| * MAC header and data, Keep the CCMP header and |
| * trailer as 0's, firmware shall fill this |
| */ |
| vos_mem_set( pFrame, newFrmLen , 0 ); |
| vos_mem_copy( pFrame, wh, sizeof(*wh)); |
| vos_mem_copy( pFrame + sizeof(*wh) + IEEE80211_CCMP_HEADERLEN, |
| pData + sizeof(*wh), frmLen - sizeof(*wh)); |
| |
| palPktFree( pMac->hHdd, HAL_TXRX_FRM_802_11_MGMT, |
| ( void* ) pData, ( void* ) tx_frame ); |
| tx_frame = pPacket; |
| frmLen = newFrmLen; |
| } |
| } else { |
| /* Allocate extra bytes for MMIE */ |
| newFrmLen = frmLen + IEEE80211_MMIE_LEN; |
| vos_status = palPktAlloc( pMac->hHdd, |
| HAL_TXRX_FRM_802_11_MGMT, |
| ( tANI_U16 )newFrmLen, |
| ( void** ) &pFrame, |
| ( void** ) &pPacket ); |
| |
| if (!VOS_IS_STATUS_SUCCESS(vos_status)) { |
| WMA_LOGP("%s: Failed to allocate %d bytes for RMF status " |
| "code (%x)", __func__, newFrmLen, vos_status); |
| /* Free the original packet memory */ |
| palPktFree( pMac->hHdd, HAL_TXRX_FRM_802_11_MGMT, |
| ( void* ) pData, ( void* ) tx_frame ); |
| goto error; |
| } |
| /* |
| * Initialize the frame with 0's and only fill |
| * MAC header and data. MMIE field will be |
| * filled by vos_attach_mmie API |
| */ |
| vos_mem_set( pFrame, newFrmLen , 0 ); |
| vos_mem_copy( pFrame, wh, sizeof(*wh)); |
| vos_mem_copy( pFrame + sizeof(*wh), |
| pData + sizeof(*wh), frmLen - sizeof(*wh)); |
| if (!vos_attach_mmie(iface->key.key, |
| iface->key.key_id[0].ipn, |
| WMA_IGTK_KEY_INDEX_4, |
| pFrame, |
| pFrame+newFrmLen, newFrmLen)) { |
| WMA_LOGP("%s: Failed to attach MMIE at the end of " |
| "frame", __func__); |
| /* Free the original packet memory */ |
| palPktFree( pMac->hHdd, HAL_TXRX_FRM_802_11_MGMT, |
| ( void* ) pData, ( void* ) tx_frame ); |
| goto error; |
| } |
| palPktFree( pMac->hHdd, HAL_TXRX_FRM_802_11_MGMT, |
| ( void* ) pData, ( void* ) tx_frame ); |
| tx_frame = pPacket; |
| frmLen = newFrmLen; |
| } |
| } |
| #endif /* WLAN_FEATURE_11W */ |
| |
| if ((frmType == HAL_TXRX_FRM_802_11_MGMT) && |
| (pFc->subType == SIR_MAC_MGMT_PROBE_RSP)) { |
| u_int64_t adjusted_tsf_le; |
| struct ieee80211_frame *wh = |
| (struct ieee80211_frame *)adf_nbuf_data(tx_frame); |
| |
| /* Make the TSF offset negative to match TSF in beacons */ |
| adjusted_tsf_le = cpu_to_le64(0ULL - |
| wma_handle->interfaces[vdev_id].tsfadjust); |
| A_MEMCPY(&wh[1], &adjusted_tsf_le, sizeof(adjusted_tsf_le)); |
| } |
| if (frmType == HAL_TXRX_FRM_802_11_DATA) { |
| adf_nbuf_t ret; |
| adf_nbuf_t skb = (adf_nbuf_t)tx_frame; |
| ol_txrx_pdev_handle pdev = |
| vos_get_context(VOS_MODULE_ID_TXRX, wma_handle->vos_context); |
| |
| struct wma_decap_info_t decap_info; |
| struct ieee80211_frame *wh = |
| (struct ieee80211_frame *)adf_nbuf_data(skb); |
| v_TIME_t curr_timestamp = vos_timer_get_system_ticks(); |
| |
| if (pdev == NULL) { |
| WMA_LOGE("%s: pdev pointer is not available", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| /* |
| * 1) TxRx Module expects data input to be 802.3 format |
| * So Decapsulation has to be done. |
| * 2) Only one Outstanding Data pending for Ack is allowed |
| */ |
| if (tx_frm_ota_comp_cb) { |
| if (wma_handle->umac_data_ota_ack_cb) { |
| /* |
| * If last data frame was sent more than 5 seconds |
| * ago and still we did not receive ack/nack from |
| * fw then allow Tx of this data frame |
| */ |
| if (curr_timestamp >= |
| wma_handle->last_umac_data_ota_timestamp + 500) { |
| WMA_LOGE("%s: No Tx Ack for last data frame for more than 5 secs, allow Tx of current data frame", |
| __func__); |
| } else { |
| WMA_LOGE("%s: Already one Data pending for Ack, reject Tx of data frame", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| } |
| } else { |
| /* |
| * Data Frames are sent through TxRx Non Standard Data Path |
| * so Ack Complete Cb is must |
| */ |
| WMA_LOGE("No Ack Complete Cb. Don't Allow"); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| /* Take out 802.11 header from skb */ |
| decap_info.hdr_len = wma_ieee80211_hdrsize(wh); |
| adf_os_mem_copy(decap_info.hdr, wh, decap_info.hdr_len); |
| adf_nbuf_pull_head(skb, decap_info.hdr_len); |
| |
| /* Decapsulate to 802.3 format */ |
| wma_decap_to_8023(skb, &decap_info); |
| |
| /* Zero out skb's context buffer for the driver to use */ |
| adf_os_mem_set(skb->cb, 0, sizeof(skb->cb)); |
| |
| /* Do the DMA Mapping */ |
| adf_nbuf_map_single(pdev->osdev, skb, ADF_OS_DMA_TO_DEVICE); |
| |
| /* Terminate the (single-element) list of tx frames */ |
| skb->next = NULL; |
| |
| /* Store the Ack Complete Cb */ |
| wma_handle->umac_data_ota_ack_cb = tx_frm_ota_comp_cb; |
| |
| /* Store the timestamp and nbuf for this data Tx */ |
| wma_handle->last_umac_data_ota_timestamp = curr_timestamp; |
| wma_handle->last_umac_data_nbuf = skb; |
| |
| /* Send the Data frame to TxRx in Non Standard Path */ |
| #if defined(CONFIG_HL_SUPPORT) && defined(FEATURE_WLAN_TDLS) |
| txrx_vdev->hlTdlsFlag = tdlsFlag; |
| #endif |
| ret = ol_tx_non_std(txrx_vdev, ol_tx_spec_no_free, skb); |
| #if defined(CONFIG_HL_SUPPORT) && defined(FEATURE_WLAN_TDLS) |
| txrx_vdev->hlTdlsFlag = false; |
| #endif |
| if (ret) { |
| WMA_LOGE("TxRx Rejected. Fail to do Tx"); |
| adf_nbuf_unmap_single(pdev->osdev, skb, ADF_OS_DMA_TO_DEVICE); |
| /* Call Download Cb so that umac can free the buffer */ |
| if (tx_frm_download_comp_cb) |
| tx_frm_download_comp_cb(wma_handle->mac_context, |
| tx_frame, |
| WMA_TX_FRAME_BUFFER_FREE); |
| wma_handle->umac_data_ota_ack_cb = NULL; |
| wma_handle->last_umac_data_nbuf = NULL; |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| /* Call Download Callback if passed */ |
| if (tx_frm_download_comp_cb) |
| tx_frm_download_comp_cb(wma_handle->mac_context, |
| tx_frame, |
| WMA_TX_FRAME_BUFFER_NO_FREE); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| is_high_latency = wdi_out_cfg_is_high_latency( |
| txrx_vdev->pdev->ctrl_pdev); |
| |
| downld_comp_required = tx_frm_download_comp_cb && is_high_latency && |
| tx_frm_ota_comp_cb; |
| |
| /* Fill the frame index to send */ |
| if(pFc->type == SIR_MAC_MGMT_FRAME) { |
| if(tx_frm_ota_comp_cb) { |
| if(downld_comp_required) |
| tx_frm_index = |
| GENERIC_DOWNLD_COMP_ACK_COMP_INDEX; |
| else |
| tx_frm_index = |
| GENERIC_NODOWLOAD_ACK_COMP_INDEX; |
| |
| /* Store the Ack Cb sent by UMAC */ |
| if(pFc->subType < SIR_MAC_MGMT_RESERVED15) { |
| wma_handle->umac_ota_ack_cb[pFc->subType] = |
| tx_frm_ota_comp_cb; |
| } |
| #ifdef QCA_PKT_PROTO_TRACE |
| if (pFc->subType == SIR_MAC_MGMT_ACTION) |
| proto_type = vos_pkt_get_proto_type(tx_frame, |
| pMac->fEnableDebugLog, |
| NBUF_PKT_TRAC_TYPE_MGMT_ACTION); |
| if (proto_type & NBUF_PKT_TRAC_TYPE_MGMT_ACTION) |
| vos_pkt_trace_buf_update("WM:T:MACT"); |
| adf_nbuf_trace_set_proto_type(tx_frame, proto_type); |
| #endif /* QCA_PKT_PROTO_TRACE */ |
| } else { |
| if(downld_comp_required) |
| tx_frm_index = |
| GENERIC_DOWNLD_COMP_NOACK_COMP_INDEX; |
| else |
| tx_frm_index = |
| GENERIC_NODOWNLD_NOACK_COMP_INDEX; |
| } |
| } |
| |
| /* |
| * If Dowload Complete is required |
| * Wait for download complete |
| */ |
| if(downld_comp_required) { |
| /* Store Tx Comp Cb */ |
| wma_handle->tx_frm_download_comp_cb = tx_frm_download_comp_cb; |
| |
| /* Reset the Tx Frame Complete Event */ |
| vos_status = vos_event_reset( |
| &wma_handle->tx_frm_download_comp_event); |
| |
| if (!VOS_IS_STATUS_SUCCESS(vos_status)) { |
| WMA_LOGP("%s: Event Reset failed tx comp event %x", |
| __func__, vos_status); |
| goto error; |
| } |
| } |
| |
| /* If the frame has to be sent at BD Rate2 inform TxRx */ |
| if(tx_flag & HAL_USE_BD_RATE2_FOR_MANAGEMENT_FRAME) |
| use_6mbps = 1; |
| |
| if (wma_handle->roam_preauth_scan_state == WMA_ROAM_PREAUTH_ON_CHAN) { |
| chanfreq = wma_handle->roam_preauth_chanfreq; |
| WMA_LOGI("%s: Preauth frame on channel %d", __func__, chanfreq); |
| } else if(pFc->subType == SIR_MAC_MGMT_PROBE_RSP){ |
| chanfreq = wma_handle->interfaces[vdev_id].mhz; |
| WMA_LOGI("%s: Probe response frame on channel %d", __func__, chanfreq); |
| WMA_LOGI("%s: Probe response frame on vdev id %d", __func__, vdev_id); |
| } else { |
| chanfreq = 0; |
| } |
| if (pMac->fEnableDebugLog & 0x1) { |
| if ((pFc->type == SIR_MAC_MGMT_FRAME) && |
| (pFc->subType != SIR_MAC_MGMT_PROBE_REQ) && |
| (pFc->subType != SIR_MAC_MGMT_PROBE_RSP)) { |
| WMA_LOGE("TX MGMT - Type %hu, SubType %hu", |
| pFc->type, pFc->subType); |
| } |
| } |
| /* Hand over the Tx Mgmt frame to TxRx */ |
| status = wdi_in_mgmt_send(txrx_vdev, tx_frame, tx_frm_index, use_6mbps, chanfreq); |
| |
| /* |
| * Failed to send Tx Mgmt Frame |
| */ |
| if (status) { |
| /* Call Download Cb so that umac can free the buffer */ |
| if (tx_frm_download_comp_cb) |
| tx_frm_download_comp_cb(wma_handle->mac_context, |
| tx_frame, |
| WMA_TX_FRAME_BUFFER_FREE); |
| WMA_LOGP("%s: Failed to send Mgmt Frame", __func__); |
| goto error; |
| } |
| |
| if (!tx_frm_download_comp_cb) |
| return VOS_STATUS_SUCCESS; |
| |
| /* |
| * Wait for Download Complete |
| * if required |
| */ |
| if (downld_comp_required) { |
| static uint8_t mgmt_downld_fail_count = 0; |
| unsigned long time_snapshot; |
| |
| time_snapshot = vos_timer_get_system_time(); |
| /* |
| * Wait for Download Complete |
| * @ Integrated : Dxe Complete |
| * @ Discrete : Target Download Complete |
| */ |
| vos_status = vos_wait_single_event( |
| &wma_handle->tx_frm_download_comp_event, |
| WMA_TX_FRAME_COMPLETE_TIMEOUT); |
| |
| if (!VOS_IS_STATUS_SUCCESS(vos_status)) { |
| mgmt_downld_fail_count++; |
| WMA_LOGP("Wait Event failed txfrm_comp_event"); |
| /* |
| * @Integrated: Something Wrong with Dxe |
| * TODO: Some Debug Code |
| * Here We need to trigger SSR since |
| * since system went into a bad state where |
| * we didn't get Download Complete for almost |
| * WMA_TX_FRAME_COMPLETE_TIMEOUT (1 sec) |
| */ |
| #ifdef CONFIG_HL_SUPPORT |
| /* display scheduler stats |
| * when count is max or modulus of |
| * OL_TXSTATS_DUMP_MOD_FREQ |
| */ |
| if ((mgmt_downld_fail_count == |
| wma_handle->max_mgmt_tx_fail_count) || |
| (mgmt_downld_fail_count % |
| OL_TXSTATS_DUMP_MOD_FREQ == 0)) { |
| wdi_in_display_stats(txrx_pdev, |
| WLAN_SCHEDULER_STATS); |
| } |
| #endif |
| WMA_LOGE("%s: download complete failure count:%d", |
| __func__, mgmt_downld_fail_count); |
| /* |
| * Inject crash only if max_mgmt_tx_fail_count is non |
| * zero value. |
| */ |
| if (wma_handle->max_mgmt_tx_fail_count && |
| mgmt_downld_fail_count == |
| wma_handle->max_mgmt_tx_fail_count) { |
| vos_flush_logs(WLAN_LOG_TYPE_FATAL, |
| WLAN_LOG_INDICATOR_HOST_DRIVER, |
| WLAN_LOG_REASON_MGMT_FRAME_TIMEOUT, |
| DUMP_VOS_TRACE); |
| wmi_crash_inject(wma_handle->wmi_handle, |
| RECOVERY_SIM_ASSERT, 0); |
| } |
| } else { |
| mgmt_downld_fail_count = 0; |
| if ((vos_timer_get_system_time() - time_snapshot) >= |
| WDA_TX_TIME_THRESHOLD) |
| WMA_LOGE("%s Tx Complete took %lu ms",__func__, |
| vos_timer_get_system_time() - time_snapshot); |
| } |
| } |
| |
| return VOS_STATUS_SUCCESS; |
| |
| error: |
| wma_handle->tx_frm_download_comp_cb = NULL; |
| wma_handle->umac_data_ota_ack_cb = NULL; |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| /* function :wma_setneedshutdown |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| v_VOID_t wma_setneedshutdown(v_VOID_t *vos_ctx) |
| { |
| tp_wma_handle wma_handle; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| |
| wma_handle = vos_get_context(VOS_MODULE_ID_WDA, vos_ctx); |
| |
| if (NULL == wma_handle) { |
| WMA_LOGP("%s: Invalid arguments", __func__); |
| VOS_ASSERT(0); |
| return; |
| } |
| |
| wma_handle->needShutdown = TRUE; |
| WMA_LOGD("%s: Exit", __func__); |
| } |
| |
| /* function : wma_rx_ready_event |
| * Description : |
| * Args : |
| * Returns : |
| */ |
| v_BOOL_t wma_needshutdown(v_VOID_t *vos_ctx) |
| { |
| tp_wma_handle wma_handle; |
| |
| WMA_LOGD("%s: Enter", __func__); |
| |
| wma_handle = vos_get_context(VOS_MODULE_ID_WDA, vos_ctx); |
| |
| if (NULL == wma_handle) { |
| WMA_LOGP("%s: Invalid arguments", __func__); |
| VOS_ASSERT(0); |
| return 0; |
| } |
| |
| WMA_LOGD("%s: Exit", __func__); |
| return wma_handle->needShutdown; |
| } |
| |
| VOS_STATUS wma_wait_for_ready_event(WMA_HANDLE handle) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| VOS_STATUS vos_status; |
| |
| /* wait until WMI_READY_EVENTID received from FW */ |
| vos_status = vos_wait_single_event( &(wma_handle->wma_ready_event), |
| WMA_READY_EVENTID_TIMEOUT ); |
| |
| if (VOS_STATUS_SUCCESS != vos_status) { |
| WMA_LOGP("%s: Timeout waiting for ready event from FW", __func__); |
| vos_status = VOS_STATUS_E_FAILURE; |
| } |
| return vos_status; |
| } |
| |
| int wma_suspend_target(WMA_HANDLE handle, int disable_target_intr) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| wmi_pdev_suspend_cmd_fixed_param* cmd; |
| wmi_buf_t wmibuf; |
| u_int32_t len = sizeof(*cmd); |
| struct ol_softc *scn; |
| #ifdef CONFIG_CNSS |
| tpAniSirGlobal pmac; |
| #endif |
| v_U32_t timeout = WMA_TGT_SUSPEND_COMPLETE_TIMEOUT; |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("WMA is closed. can not issue suspend cmd"); |
| return -EINVAL; |
| } |
| |
| #ifdef CONFIG_CNSS |
| pmac = vos_get_context(VOS_MODULE_ID_PE, wma_handle->vos_context); |
| if (!pmac) { |
| WMA_LOGE("%s: Unable to get PE context!", __func__); |
| return -EINVAL; |
| } |
| #endif |
| |
| /* |
| * send the comand to Target to ignore the |
| * PCIE reset so as to ensure that Host and target |
| * states are in sync |
| */ |
| wmibuf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (wmibuf == NULL) { |
| return -1; |
| } |
| |
| cmd = (wmi_pdev_suspend_cmd_fixed_param *) wmi_buf_data(wmibuf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_pdev_suspend_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_pdev_suspend_cmd_fixed_param)); |
| if (disable_target_intr) { |
| cmd->suspend_opt = WMI_PDEV_SUSPEND_AND_DISABLE_INTR; |
| } |
| else { |
| cmd->suspend_opt = WMI_PDEV_SUSPEND; |
| } |
| vos_event_reset(&wma_handle->target_suspend); |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, wmibuf, len, |
| WMI_PDEV_SUSPEND_CMDID)) { |
| wmi_buf_free(wmibuf); |
| return -1; |
| } |
| |
| |
| wmi_set_target_suspend(wma_handle->wmi_handle, TRUE); |
| |
| /* overwrite the timeout value to shorten the SSR latency in HL |
| * solution. |
| */ |
| if (vos_is_logp_in_progress(VOS_MODULE_ID_VOSS, NULL)) { |
| WMA_LOGP("%s: %d HL ssr in progress", |
| __func__, __LINE__); |
| timeout = WMA_SUSPEND_TIMEOUT_IN_SSR; |
| } |
| |
| if (vos_wait_single_event(&wma_handle->target_suspend, |
| timeout) |
| != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to get ACK from firmware for pdev suspend"); |
| if (wma_did_ssr_happen(wma_handle)) { |
| WMA_LOGE("%s: SSR happened while waiting for response", |
| __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| wmi_set_target_suspend(wma_handle->wmi_handle, FALSE); |
| #ifdef CONFIG_CNSS |
| if (vos_is_load_unload_in_progress(VOS_MODULE_ID_WDA, NULL) || |
| vos_is_logp_in_progress(VOS_MODULE_ID_VOSS, NULL)) { |
| WMA_LOGE("%s: Unloading/Loading/LOGP is in progress, Ignore!", |
| __func__); |
| } else { |
| if (pmac->sme.enableSelfRecovery) { |
| vos_trigger_recovery(false); |
| } else { |
| VOS_BUG(0); |
| } |
| } |
| #endif |
| return -1; |
| } |
| |
| scn = vos_get_context(VOS_MODULE_ID_HIF,wma_handle->vos_context); |
| |
| if (scn == NULL) { |
| WMA_LOGE("%s: Failed to get HIF context", __func__); |
| VOS_ASSERT(0); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| void wma_target_suspend_acknowledge(void *context) |
| { |
| void *vos_context = vos_get_global_context(VOS_MODULE_ID_WDA, NULL); |
| tp_wma_handle wma = vos_get_context(VOS_MODULE_ID_WDA, vos_context); |
| int wow_nack = *((int *)context); |
| |
| if (NULL == wma) { |
| WMA_LOGE("%s: wma is NULL", __func__); |
| return; |
| } |
| |
| wma->wow_nack = wow_nack; |
| vos_event_set(&wma->target_suspend); |
| if (wow_nack && !wmi_get_runtime_pm_inprogress(wma->wmi_handle)) |
| vos_wake_lock_timeout_acquire(&wma->wow_wake_lock, |
| WMA_WAKE_LOCK_TIMEOUT, |
| WIFI_POWER_EVENT_WAKELOCK_WOW); |
| } |
| |
| int wma_resume_target(WMA_HANDLE handle, int runtime_pm) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| wmi_buf_t wmibuf; |
| wmi_pdev_resume_cmd_fixed_param *cmd; |
| int ret; |
| int timeout = 0; |
| int wmi_pending_cmds; |
| |
| wmibuf = wmi_buf_alloc(wma_handle->wmi_handle, sizeof(*cmd)); |
| if (wmibuf == NULL) { |
| return -1; |
| } |
| cmd = (wmi_pdev_resume_cmd_fixed_param *) wmi_buf_data(wmibuf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_pdev_resume_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_pdev_resume_cmd_fixed_param)); |
| cmd->pdev_id = 0; |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, wmibuf, sizeof(*cmd), |
| WMI_PDEV_RESUME_CMDID); |
| if(ret != EOK) { |
| WMA_LOGE("Failed to send WMI_PDEV_RESUME_CMDID command"); |
| wmi_buf_free(wmibuf); |
| } |
| |
| if (runtime_pm) |
| goto end; |
| |
| wmi_pending_cmds = wmi_get_pending_cmds(wma_handle->wmi_handle); |
| while (wmi_pending_cmds && timeout++ < WMA_MAX_RESUME_RETRY) { |
| msleep(10); |
| wmi_pending_cmds = wmi_get_pending_cmds(wma_handle->wmi_handle); |
| } |
| |
| if (wmi_pending_cmds) { |
| WMA_LOGE("Failed to deliver WMI_PDEV_RESUME_CMDID command %d\n", timeout); |
| ret = -1; |
| } |
| |
| end: |
| if (EOK == ret) |
| wmi_set_target_suspend(wma_handle->wmi_handle, FALSE); |
| |
| return ret; |
| } |
| |
| void WDA_TimerTrafficStatsInd(tWDA_CbContext *pWDA) |
| { |
| } |
| /* TODO: Below is stub should be removed later */ |
| void WDI_DS_ActivateTrafficStats(void) |
| { |
| } |
| /* |
| * Function fills the rx packet meta info from the the vos packet |
| */ |
| VOS_STATUS WDA_DS_PeekRxPacketInfo(vos_pkt_t *pkt, v_PVOID_t *pkt_meta, |
| v_BOOL_t bSwap) |
| { |
| /* Sanity Check */ |
| if(pkt == NULL) { |
| WMA_LOGE("wma:Invalid parameter sent on wma_peek_rx_pkt_info"); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| *pkt_meta = &(pkt->pkt_meta); |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /* |
| * Function to lookup MAC address from vdev ID |
| */ |
| u_int8_t *wma_get_vdev_address_by_vdev_id(u_int8_t vdev_id) |
| { |
| tp_wma_handle wma; |
| |
| wma = vos_get_context(VOS_MODULE_ID_WDA, |
| vos_get_global_context(VOS_MODULE_ID_WDA, NULL)); |
| if (!wma) { |
| WMA_LOGE("%s: Invalid WMA handle", __func__); |
| return NULL; |
| } |
| |
| if (vdev_id >= wma->max_bssid) { |
| WMA_LOGE("%s: Invalid vdev_id %u", __func__, vdev_id); |
| return NULL; |
| } |
| |
| return wma->interfaces[vdev_id].addr; |
| } |
| |
| /* |
| * Function to get the beacon buffer from vdev ID |
| * Note: The buffer returned must be freed explicitly by caller |
| */ |
| void *wma_get_beacon_buffer_by_vdev_id(u_int8_t vdev_id, u_int32_t *buffer_size) |
| { |
| tp_wma_handle wma; |
| struct beacon_info *beacon; |
| u_int8_t *buf; |
| u_int32_t buf_size; |
| |
| wma = vos_get_context(VOS_MODULE_ID_WDA, |
| vos_get_global_context(VOS_MODULE_ID_WDA, NULL)); |
| |
| if (!wma) { |
| WMA_LOGE("%s: Invalid WMA handle", __func__); |
| return NULL; |
| } |
| |
| if (vdev_id >= wma->max_bssid) { |
| WMA_LOGE("%s: Invalid vdev_id %u", __func__, vdev_id); |
| return NULL; |
| } |
| |
| if (!wma_is_vdev_in_ap_mode(wma, vdev_id)) { |
| WMA_LOGE("%s: vdevid %d is not in AP mode", |
| __func__, vdev_id); |
| return NULL; |
| } |
| |
| beacon = wma->interfaces[vdev_id].beacon; |
| |
| if (!beacon) { |
| WMA_LOGE("%s: beacon invalid", __func__); |
| return NULL; |
| } |
| |
| adf_os_spin_lock_bh(&beacon->lock); |
| |
| buf_size = adf_nbuf_len(beacon->buf); |
| buf = adf_os_mem_alloc(NULL, buf_size); |
| |
| if (!buf) { |
| adf_os_spin_unlock_bh(&beacon->lock); |
| WMA_LOGE("%s: alloc failed for beacon buf", __func__); |
| return NULL; |
| } |
| |
| adf_os_mem_copy(buf, adf_nbuf_data(beacon->buf), buf_size); |
| |
| adf_os_spin_unlock_bh(&beacon->lock); |
| |
| if (buffer_size) |
| *buffer_size = buf_size; |
| |
| return buf; |
| } |
| |
| #if defined(QCA_WIFI_FTM) |
| int wma_utf_rsp(tp_wma_handle wma_handle, u_int8_t **payload, u_int32_t *len) |
| { |
| int ret = -1; |
| u_int32_t payload_len; |
| |
| payload_len = wma_handle->utf_event_info.length; |
| if (payload_len) { |
| ret = 0; |
| |
| /* |
| * The first 4 bytes holds the payload size |
| * and the actual payload sits next to it |
| */ |
| *payload = (u_int8_t *)vos_mem_malloc((v_SIZE_t)payload_len |
| + sizeof(A_UINT32)); |
| *(A_UINT32*)&(*payload[0]) = wma_handle->utf_event_info.length; |
| memcpy(*payload + sizeof(A_UINT32), |
| wma_handle->utf_event_info.data, |
| payload_len); |
| wma_handle->utf_event_info.length = 0; |
| *len = payload_len; |
| } |
| |
| return ret; |
| } |
| |
| static void wma_post_ftm_response(tp_wma_handle wma_handle) |
| { |
| int ret; |
| u_int8_t *payload; |
| u_int32_t data_len; |
| vos_msg_t msg = {0}; |
| VOS_STATUS status; |
| |
| ret = wma_utf_rsp(wma_handle, &payload, &data_len); |
| |
| if (ret) { |
| return; |
| } |
| |
| msg.type = SYS_MSG_ID_FTM_RSP; |
| msg.bodyptr = payload; |
| msg.bodyval = 0; |
| msg.reserved = SYS_MSG_COOKIE; |
| |
| status = vos_mq_post_message(VOS_MQ_ID_SYS, &msg); |
| |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("failed to post ftm response to SYS"); |
| vos_mem_free(payload); |
| } |
| } |
| |
| static int |
| wma_process_utf_event(WMA_HANDLE handle, |
| u_int8_t *datap, u_int32_t dataplen) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle)handle; |
| SEG_HDR_INFO_STRUCT segHdrInfo; |
| u_int8_t totalNumOfSegments,currentSeq; |
| WMI_PDEV_UTF_EVENTID_param_tlvs *param_buf; |
| u_int8_t *data; |
| u_int32_t datalen; |
| |
| param_buf = (WMI_PDEV_UTF_EVENTID_param_tlvs *) datap; |
| if (!param_buf) { |
| WMA_LOGE("Get NULL point message from FW"); |
| return -EINVAL; |
| } |
| data = param_buf->data; |
| datalen = param_buf->num_data; |
| |
| if (datalen < sizeof(segHdrInfo)) { |
| WMA_LOGE("message size %d is smaller than struct seg_hdr_info", |
| datalen); |
| return -EINVAL; |
| } |
| |
| segHdrInfo = *(SEG_HDR_INFO_STRUCT *)&(data[0]); |
| |
| wma_handle->utf_event_info.currentSeq = (segHdrInfo.segmentInfo & 0xF); |
| |
| currentSeq = (segHdrInfo.segmentInfo & 0xF); |
| totalNumOfSegments = (segHdrInfo.segmentInfo >> 4) & 0xF; |
| |
| datalen = datalen - sizeof(segHdrInfo); |
| |
| if (currentSeq == 0) { |
| wma_handle->utf_event_info.expectedSeq = 0; |
| wma_handle->utf_event_info.offset = 0; |
| } else { |
| if (wma_handle->utf_event_info.expectedSeq != currentSeq) |
| WMA_LOGE("Mismatch in expecting seq expected" |
| " Seq %d got seq %d", |
| wma_handle->utf_event_info.expectedSeq, |
| currentSeq); |
| } |
| |
| if ((datalen > MAX_UTF_EVENT_LENGTH) || |
| (wma_handle->utf_event_info.offset > |
| (MAX_UTF_EVENT_LENGTH - datalen))) { |
| WMA_LOGE("Excess data from firmware, offset:%zu, len:%d", |
| wma_handle->utf_event_info.offset, datalen); |
| return -EINVAL; |
| } |
| |
| memcpy(&wma_handle->utf_event_info.data[wma_handle->utf_event_info.offset], |
| &data[sizeof(segHdrInfo)], |
| datalen); |
| wma_handle->utf_event_info.offset = wma_handle->utf_event_info.offset + datalen; |
| wma_handle->utf_event_info.expectedSeq++; |
| |
| if (wma_handle->utf_event_info.expectedSeq == totalNumOfSegments) { |
| if (wma_handle->utf_event_info.offset != segHdrInfo.len) |
| WMA_LOGE("All segs received total len mismatch.." |
| " len %zu total len %d", |
| wma_handle->utf_event_info.offset, |
| segHdrInfo.len); |
| |
| wma_handle->utf_event_info.length = wma_handle->utf_event_info.offset; |
| } |
| |
| wma_post_ftm_response(wma_handle); |
| |
| return 0; |
| } |
| |
| void wma_utf_detach(tp_wma_handle wma_handle) |
| { |
| if (wma_handle->utf_event_info.data) { |
| vos_mem_free(wma_handle->utf_event_info.data); |
| wma_handle->utf_event_info.data = NULL; |
| wma_handle->utf_event_info.length = 0; |
| wmi_unified_unregister_event_handler(wma_handle->wmi_handle, |
| WMI_PDEV_UTF_EVENTID); |
| } |
| } |
| |
| void wma_utf_attach(tp_wma_handle wma_handle) |
| { |
| int ret; |
| |
| wma_handle->utf_event_info.data = (unsigned char *) |
| vos_mem_malloc(MAX_UTF_EVENT_LENGTH); |
| wma_handle->utf_event_info.length = 0; |
| |
| ret = wmi_unified_register_event_handler(wma_handle->wmi_handle, |
| WMI_PDEV_UTF_EVENTID, |
| wma_process_utf_event); |
| |
| if (ret) |
| WMA_LOGP("%s: Failed to register UTF event callback", __func__); |
| } |
| |
| static int |
| wmi_unified_pdev_utf_cmd(wmi_unified_t wmi_handle, u_int8_t *utf_payload, |
| u_int16_t len) |
| { |
| wmi_buf_t buf; |
| u_int8_t *cmd; |
| int ret = 0; |
| static u_int8_t msgref = 1; |
| u_int8_t segNumber = 0, segInfo, numSegments; |
| u_int16_t chunk_len, total_bytes; |
| u_int8_t *bufpos; |
| SEG_HDR_INFO_STRUCT segHdrInfo; |
| |
| bufpos = utf_payload; |
| total_bytes = len; |
| ASSERT(total_bytes / MAX_WMI_UTF_LEN == |
| (u_int8_t)(total_bytes / MAX_WMI_UTF_LEN)); |
| numSegments = (u_int8_t)(total_bytes / MAX_WMI_UTF_LEN); |
| |
| if (len - (numSegments * MAX_WMI_UTF_LEN)) |
| numSegments++; |
| |
| while (len) { |
| if (len > MAX_WMI_UTF_LEN) |
| chunk_len = MAX_WMI_UTF_LEN; /* MAX messsage */ |
| else |
| chunk_len = len; |
| |
| buf = wmi_buf_alloc(wmi_handle, |
| (chunk_len + sizeof(segHdrInfo) + |
| WMI_TLV_HDR_SIZE)); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| return -1; |
| } |
| |
| cmd = (u_int8_t *)wmi_buf_data(buf); |
| |
| segHdrInfo.len = total_bytes; |
| segHdrInfo.msgref = msgref; |
| segInfo = ((numSegments << 4 ) & 0xF0) | (segNumber & 0xF); |
| segHdrInfo.segmentInfo = segInfo; |
| segHdrInfo.pad = 0; |
| |
| WMA_LOGD("%s:segHdrInfo.len = %d, segHdrInfo.msgref = %d," |
| " segHdrInfo.segmentInfo = %d", |
| __func__, segHdrInfo.len, segHdrInfo.msgref, |
| segHdrInfo.segmentInfo); |
| |
| WMA_LOGD("%s:total_bytes %d segNumber %d totalSegments %d" |
| "chunk len %d", __func__, total_bytes, segNumber, |
| numSegments, chunk_len); |
| |
| segNumber++; |
| |
| WMITLV_SET_HDR(cmd, WMITLV_TAG_ARRAY_BYTE, |
| (chunk_len + sizeof(segHdrInfo))); |
| cmd += WMI_TLV_HDR_SIZE; |
| memcpy(cmd, &segHdrInfo, sizeof(segHdrInfo)); /* 4 bytes */ |
| memcpy(&cmd[sizeof(segHdrInfo)], bufpos, chunk_len); |
| |
| ret = wmi_unified_cmd_send(wmi_handle, buf, |
| (chunk_len + sizeof(segHdrInfo) + |
| WMI_TLV_HDR_SIZE), |
| WMI_PDEV_UTF_CMDID); |
| |
| if (ret != EOK) { |
| WMA_LOGE("Failed to send WMI_PDEV_UTF_CMDID command"); |
| wmi_buf_free(buf); |
| break; |
| } |
| |
| len -= chunk_len; |
| bufpos += chunk_len; |
| } |
| |
| msgref++; |
| |
| return ret; |
| } |
| |
| int wma_utf_cmd(tp_wma_handle wma_handle, u_int8_t *data, u_int16_t len) |
| { |
| wma_handle->utf_event_info.length = 0; |
| return wmi_unified_pdev_utf_cmd(wma_handle->wmi_handle, data, len); |
| } |
| |
| static VOS_STATUS |
| wma_process_ftm_command(tp_wma_handle wma_handle, |
| struct ar6k_testmode_cmd_data *msg_buffer) |
| { |
| u_int8_t *data = NULL; |
| u_int16_t len = 0; |
| int ret; |
| |
| if (!msg_buffer) |
| return VOS_STATUS_E_INVAL; |
| |
| if (vos_get_conparam() != VOS_FTM_MODE) { |
| WMA_LOGE("FTM command issued in non-FTM mode"); |
| vos_mem_free(msg_buffer->data); |
| vos_mem_free(msg_buffer); |
| return VOS_STATUS_E_NOSUPPORT; |
| } |
| |
| data = msg_buffer->data; |
| len = msg_buffer->len; |
| |
| ret = wma_utf_cmd(wma_handle, data, len); |
| |
| vos_mem_free(msg_buffer->data); |
| vos_mem_free(msg_buffer); |
| |
| if (ret) |
| return VOS_STATUS_E_FAILURE; |
| |
| return VOS_STATUS_SUCCESS; |
| } |
| #endif |
| |
| /* Function to enable/disble Low Power Support(Pdev Specific) */ |
| VOS_STATUS WDA_SetIdlePsConfig(void *wda_handle, tANI_U32 idle_ps) |
| { |
| int32_t ret; |
| tp_wma_handle wma = (tp_wma_handle)wda_handle; |
| |
| WMA_LOGD("WMA Set Idle Ps Config [1:set 0:clear] val %d", idle_ps); |
| /* only use vdev 0 for imps tracking */ |
| wma->interfaces[0].in_imps = idle_ps; |
| /* Set Idle Mode Power Save Config */ |
| ret = wmi_unified_pdev_set_param(wma->wmi_handle, |
| WMI_PDEV_PARAM_IDLE_PS_CONFIG, idle_ps); |
| if(ret) { |
| WMA_LOGE("Fail to Set Idle Ps Config %d", idle_ps); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("Successfully Set Idle Ps Config %d", idle_ps); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_set_cts2self_for_p2p_go() - set CTS2SELF command for P2P GO. |
| * @wda_handle: pointer to wma handle. |
| * @cts2self_for_p2p_go: value needs to set to firmware. |
| * |
| * At the time of driver startup, inform about ini parma to FW that |
| * if legacy client connects to P2P GO, stop using NOA for P2P GO. |
| * |
| * Return: VOS_STATUS. |
| */ |
| VOS_STATUS wma_set_cts2self_for_p2p_go(void *wda_handle, |
| uint32_t cts2self_for_p2p_go) |
| { |
| int32_t ret; |
| tp_wma_handle wma = (tp_wma_handle)wda_handle; |
| |
| ret = wmi_unified_pdev_set_param(wma->wmi_handle, |
| WMI_PDEV_PARAM_CTS2SELF_FOR_P2P_GO_CONFIG, |
| cts2self_for_p2p_go); |
| if (ret) { |
| WMA_LOGE("Fail to Set CTS2SELF for p2p GO %d", |
| cts2self_for_p2p_go); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| WMA_LOGD("Successfully Set CTS2SELF for p2p GO %d", |
| cts2self_for_p2p_go); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wma_set_mib_stats_enable() - enable mib stats in FW. |
| * @wda_handle: pointer to wma handle. |
| * @enable: value needs to set to firmware. |
| * |
| * At the time of driver startup, inform about ini parma to FW that |
| * if mibs stats needs to be collected |
| * |
| * Return: VOS_STATUS. |
| */ |
| VOS_STATUS wma_set_mib_stats_enable(void *handle, |
| uint32_t enable) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle)handle; |
| wmi_mib_stats_enable_cmd_fixed_param *cmd; |
| int status = 0; |
| wmi_buf_t buf; |
| u_int8_t *buf_ptr; |
| int32_t len = sizeof(wmi_mib_stats_enable_cmd_fixed_param); |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE(FL("WMA is closed, can not issue cmd")); |
| return VOS_STATUS_E_INVAL; |
| } |
| |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP(FL("wmi_buf_alloc failed")); |
| return -ENOMEM; |
| } |
| |
| /* reset previous data for ccmp replays */ |
| wma_handle->ccmp_replays_attack_cnt = 0; |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(buf); |
| cmd = (wmi_mib_stats_enable_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_mib_stats_enable_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_mib_stats_enable_cmd_fixed_param)); |
| cmd->enable_Mib = enable; |
| |
| status = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_MIB_STATS_ENABLE_CMDID); |
| if (status != EOK) { |
| WMA_LOGE("%s: wmi_unified_cmd_send WMI_MIB_STATS_ENABLE_CMDID" |
| " returned Error %d", |
| __func__, status); |
| return VOS_STATUS_E_FAILURE; |
| } |
| return VOS_STATUS_SUCCESS; |
| |
| } |
| |
| eHalStatus wma_set_htconfig(tANI_U8 vdev_id, tANI_U16 ht_capab, int value) |
| { |
| void *vos_context = vos_get_global_context(VOS_MODULE_ID_WDA, NULL); |
| tp_wma_handle wma = vos_get_context(VOS_MODULE_ID_WDA, vos_context); |
| int ret = -EIO; |
| |
| if (NULL == wma) { |
| WMA_LOGE("%s: Failed to get wma", __func__); |
| return eHAL_STATUS_INVALID_PARAMETER; |
| } |
| |
| switch (ht_capab) { |
| case WNI_CFG_HT_CAP_INFO_ADVANCE_CODING: |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_LDPC, value); |
| break; |
| case WNI_CFG_HT_CAP_INFO_TX_STBC: |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_TX_STBC, value); |
| break; |
| case WNI_CFG_HT_CAP_INFO_RX_STBC: |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_RX_STBC, value); |
| break; |
| case WNI_CFG_HT_CAP_INFO_SHORT_GI_20MHZ: |
| case WNI_CFG_HT_CAP_INFO_SHORT_GI_40MHZ: |
| WMA_LOGE("%s: ht_capab = %d, value = %d", __func__, ht_capab, value); |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_SGI, value); |
| if (ret == 0) |
| wma->interfaces[vdev_id].config.shortgi = value; |
| break; |
| default: |
| WMA_LOGE("%s:INVALID HT CONFIG", __func__); |
| } |
| |
| return (ret)? eHAL_STATUS_FAILURE : eHAL_STATUS_SUCCESS; |
| } |
| |
| eHalStatus WMA_SetRegDomain(void * clientCtxt, v_REGDOMAIN_t regId, |
| tAniBool sendRegHint) |
| { |
| if(VOS_STATUS_SUCCESS != vos_nv_setRegDomain(clientCtxt, regId, sendRegHint)) |
| return eHAL_STATUS_INVALID_PARAMETER; |
| |
| return eHAL_STATUS_SUCCESS; |
| } |
| |
| tANI_U8 wma_getFwWlanFeatCaps(tANI_U8 featEnumValue) |
| { |
| return ((gFwWlanFeatCaps & (1 << featEnumValue)) ? TRUE : FALSE); |
| } |
| |
| void wma_send_regdomain_info(u_int32_t reg_dmn, u_int16_t regdmn2G, |
| u_int16_t regdmn5G, int8_t ctl2G, int8_t ctl5G) |
| { |
| wmi_buf_t buf; |
| wmi_pdev_set_regdomain_cmd_fixed_param *cmd; |
| int32_t len = sizeof(*cmd); |
| void *vos_context = vos_get_global_context(VOS_MODULE_ID_WDA, NULL); |
| tp_wma_handle wma = vos_get_context(VOS_MODULE_ID_WDA, vos_context); |
| int32_t cck_mask_val = 0; |
| int ret = 0; |
| |
| if (NULL == wma) { |
| WMA_LOGE("%s: wma context is NULL", __func__); |
| return; |
| } |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGP("%s: wmi_buf_alloc failed", __func__); |
| return; |
| } |
| |
| cmd = (wmi_pdev_set_regdomain_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_pdev_set_regdomain_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_pdev_set_regdomain_cmd_fixed_param)); |
| cmd->reg_domain = reg_dmn; |
| cmd->reg_domain_2G = regdmn2G; |
| cmd->reg_domain_5G = regdmn5G; |
| cmd->conformance_test_limit_2G = ctl2G; |
| cmd->conformance_test_limit_5G = ctl5G; |
| |
| if (wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_PDEV_SET_REGDOMAIN_CMDID)) { |
| WMA_LOGP("%s: Failed to send pdev set regdomain command", |
| __func__); |
| wmi_buf_free(buf); |
| } |
| |
| if ((((reg_dmn & ~COUNTRY_ERD_FLAG) == CTRY_JAPAN) || |
| ((reg_dmn & ~COUNTRY_ERD_FLAG) == CTRY_KOREA_ROC)) && |
| (true == wma->tx_chain_mask_cck)) |
| cck_mask_val = 1; |
| |
| cck_mask_val |= (wma->self_gen_frm_pwr << 16); |
| ret = wmi_unified_pdev_set_param(wma->wmi_handle, |
| WMI_PDEV_PARAM_TX_CHAIN_MASK_CCK, |
| cck_mask_val); |
| if (ret) { |
| WMA_LOGE("failed to set PDEV tx_chain_mask_cck %d", |
| ret); |
| } |
| |
| return; |
| } |
| |
| void wma_get_modeselect(tp_wma_handle wma, u_int32_t *modeSelect) |
| { |
| |
| switch (wma->phy_capability) { |
| case WMI_11G_CAPABILITY: |
| case WMI_11NG_CAPABILITY: |
| *modeSelect &= ~(REGDMN_MODE_11A | REGDMN_MODE_TURBO | |
| REGDMN_MODE_108A | REGDMN_MODE_11A_HALF_RATE | |
| REGDMN_MODE_11A_QUARTER_RATE | REGDMN_MODE_11NA_HT20 | |
| REGDMN_MODE_11NA_HT40PLUS | REGDMN_MODE_11NA_HT40MINUS | |
| REGDMN_MODE_11AC_VHT20 | REGDMN_MODE_11AC_VHT40PLUS | |
| REGDMN_MODE_11AC_VHT40MINUS | REGDMN_MODE_11AC_VHT80); |
| break; |
| case WMI_11A_CAPABILITY: |
| case WMI_11NA_CAPABILITY: |
| case WMI_11AC_CAPABILITY: |
| *modeSelect &= ~(REGDMN_MODE_11B | REGDMN_MODE_11G | |
| REGDMN_MODE_108G | REGDMN_MODE_11NG_HT20 | |
| REGDMN_MODE_11NG_HT40PLUS | REGDMN_MODE_11NG_HT40MINUS | |
| REGDMN_MODE_11AC_VHT20_2G | REGDMN_MODE_11AC_VHT40_2G | |
| REGDMN_MODE_11AC_VHT80_2G); |
| break; |
| } |
| } |
| |
| tANI_U8 wma_map_channel(tANI_U8 mapChannel) |
| { |
| return mapChannel; |
| } |
| |
| static eHalStatus wma_set_mimops(tp_wma_handle wma, tANI_U8 vdev_id, int value) |
| { |
| int ret = eHAL_STATUS_SUCCESS; |
| wmi_sta_smps_force_mode_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| u_int16_t len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| cmd = (wmi_sta_smps_force_mode_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_sta_smps_force_mode_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_sta_smps_force_mode_cmd_fixed_param)); |
| |
| cmd->vdev_id = vdev_id; |
| |
| /* WMI_SMPS_FORCED_MODE values do not directly map |
| * to SM power save values defined in the specification. |
| * Make sure to send the right mapping. |
| */ |
| switch(value) |
| { |
| case 0: |
| cmd->forced_mode = WMI_SMPS_FORCED_MODE_NONE; |
| break; |
| case 1: |
| cmd->forced_mode = WMI_SMPS_FORCED_MODE_DISABLED; |
| break; |
| case 2: |
| cmd->forced_mode = WMI_SMPS_FORCED_MODE_STATIC; |
| break; |
| case 3: |
| cmd->forced_mode = WMI_SMPS_FORCED_MODE_DYNAMIC; |
| break; |
| default: |
| WMA_LOGE("%s:INVALID Mimo PS CONFIG", __func__); |
| return eHAL_STATUS_FAILURE; |
| } |
| |
| WMA_LOGD("Setting vdev %d value = %u", vdev_id, value); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_STA_SMPS_FORCE_MODE_CMDID); |
| if (ret < 0) { |
| WMA_LOGE("Failed to send set Mimo PS ret = %d", ret); |
| wmi_buf_free(buf); |
| } |
| |
| return ret; |
| } |
| |
| static eHalStatus wma_set_ppsconfig(tANI_U8 vdev_id, tANI_U16 pps_param, int val) |
| { |
| void *vos_context = vos_get_global_context(VOS_MODULE_ID_WDA, NULL); |
| tp_wma_handle wma = vos_get_context(VOS_MODULE_ID_WDA, vos_context); |
| int ret = -EIO; |
| u_int32_t pps_val; |
| |
| if (NULL == wma) { |
| WMA_LOGE("%s: Failed to get wma", __func__); |
| return eHAL_STATUS_INVALID_PARAMETER; |
| } |
| |
| switch (pps_param) { |
| case WMA_VHT_PPS_PAID_MATCH: |
| pps_val = ((val << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_PAID_MATCH & 0xffff); |
| goto pkt_pwr_save_config; |
| case WMA_VHT_PPS_GID_MATCH: |
| pps_val = ((val << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_GID_MATCH & 0xffff); |
| goto pkt_pwr_save_config; |
| case WMA_VHT_PPS_DELIM_CRC_FAIL: |
| pps_val = ((val << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_DELIM_CRC_FAIL & 0xffff); |
| goto pkt_pwr_save_config; |
| |
| /* Enable the code below as and when the functionality |
| * is supported/added in host. |
| */ |
| #ifdef NOT_YET |
| case WMA_VHT_PPS_EARLY_TIM_CLEAR: |
| pps_val = ((val << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_EARLY_TIM_CLEAR & 0xffff); |
| goto pkt_pwr_save_config; |
| case WMA_VHT_PPS_EARLY_DTIM_CLEAR: |
| pps_val = ((val << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_EARLY_DTIM_CLEAR & 0xffff); |
| goto pkt_pwr_save_config; |
| case WMA_VHT_PPS_EOF_PAD_DELIM: |
| pps_val = ((val << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_EOF_PAD_DELIM & 0xffff); |
| goto pkt_pwr_save_config; |
| case WMA_VHT_PPS_MACADDR_MISMATCH: |
| pps_val = ((val << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_MACADDR_MISMATCH & 0xffff); |
| goto pkt_pwr_save_config; |
| case WMA_VHT_PPS_GID_NSTS_ZERO: |
| pps_val = ((val << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_GID_NSTS_ZERO & 0xffff); |
| goto pkt_pwr_save_config; |
| case WMA_VHT_PPS_RSSI_CHECK: |
| pps_val = ((val << 31) & 0xffff0000) | |
| (PKT_PWR_SAVE_RSSI_CHECK & 0xffff); |
| goto pkt_pwr_save_config; |
| #endif |
| pkt_pwr_save_config: |
| WMA_LOGD("vdev_id:%d val:0x%x pps_val:0x%x", vdev_id, |
| val, pps_val); |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_PACKET_POWERSAVE, pps_val); |
| break; |
| default: |
| WMA_LOGE("%s:INVALID PPS CONFIG", __func__); |
| } |
| |
| return (ret)? eHAL_STATUS_FAILURE : eHAL_STATUS_SUCCESS; |
| } |
| |
| #ifdef FEATURE_WLAN_TDLS |
| static int wma_set_tdls_offchan_mode(WMA_HANDLE handle, |
| tTdlsChanSwitchParams* pChanSwitchParams) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| wmi_tdls_set_offchan_mode_cmd_fixed_param* cmd; |
| wmi_buf_t wmi_buf; |
| u_int16_t len = sizeof(wmi_tdls_set_offchan_mode_cmd_fixed_param); |
| int ret = 0; |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue tdls off channel cmd", |
| __func__); |
| ret = -EINVAL; |
| goto end; |
| } |
| wmi_buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmai_buf_alloc failed", __func__); |
| ret = -ENOMEM; |
| goto end; |
| } |
| cmd = (wmi_tdls_set_offchan_mode_cmd_fixed_param*)wmi_buf_data(wmi_buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_tdls_set_offchan_mode_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_tdls_set_offchan_mode_cmd_fixed_param)); |
| |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(pChanSwitchParams->peerMacAddr, |
| &cmd->peer_macaddr); |
| cmd->vdev_id = pChanSwitchParams->vdevId; |
| cmd->offchan_mode = pChanSwitchParams->tdlsSwMode; |
| cmd->is_peer_responder = pChanSwitchParams->is_responder; |
| cmd->offchan_num = pChanSwitchParams->tdlsOffCh; |
| cmd->offchan_bw_bitmap = pChanSwitchParams->tdlsOffChBwOffset; |
| cmd->offchan_oper_class = pChanSwitchParams->operClass; |
| |
| WMA_LOGD("%s: Peer MAC Addr mac_addr31to0: 0x%x, " |
| "mac_addr47to32: 0x%x", |
| __func__, cmd->peer_macaddr.mac_addr31to0, |
| cmd->peer_macaddr.mac_addr47to32); |
| |
| WMA_LOGD("%s: vdev_id: %d, " |
| "off channel mode: %d, " |
| "off channel Num: %d, " |
| "off channel offset: 0x%x, " |
| "is_peer_responder: %d, " |
| "operating class: %d, ", |
| __func__, cmd->vdev_id, |
| cmd->offchan_mode, |
| cmd->offchan_num, |
| cmd->offchan_bw_bitmap, |
| cmd->is_peer_responder, |
| cmd->offchan_oper_class); |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, wmi_buf, len, |
| WMI_TDLS_SET_OFFCHAN_MODE_CMDID)) { |
| WMA_LOGP("%s: failed to send tdls off chan command", __func__); |
| wmi_buf_free(wmi_buf); |
| ret = -EIO; |
| } |
| |
| end: |
| if (pChanSwitchParams) |
| vos_mem_free(pChanSwitchParams); |
| return ret; |
| } |
| |
| /* wmi tdls command sent to firmware to enable/disable tdls for a vdev */ |
| static int wma_update_fw_tdls_state(WMA_HANDLE handle, void *pwmaTdlsparams) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| wmi_tdls_set_state_cmd_fixed_param* cmd; |
| wmi_buf_t wmi_buf; |
| t_wma_tdls_mode tdls_mode; |
| t_wma_tdls_params *wma_tdls = (t_wma_tdls_params *)pwmaTdlsparams; |
| u_int16_t len = sizeof(wmi_tdls_set_state_cmd_fixed_param); |
| int ret = 0; |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue fw tdls state cmd", |
| __func__); |
| ret = -EINVAL; |
| goto end_fw_tdls_state; |
| } |
| |
| wmi_buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmai_buf_alloc failed", __func__); |
| ret = ENOMEM; |
| goto end_fw_tdls_state; |
| } |
| tdls_mode = wma_tdls->tdls_state; |
| cmd = (wmi_tdls_set_state_cmd_fixed_param *)wmi_buf_data(wmi_buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_tdls_set_state_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_tdls_set_state_cmd_fixed_param)); |
| cmd->vdev_id = wma_tdls->vdev_id; |
| |
| if (WMA_TDLS_SUPPORT_EXPLICIT_TRIGGER_ONLY == tdls_mode) { |
| cmd->state = WMI_TDLS_ENABLE_PASSIVE; |
| } else if (WMA_TDLS_SUPPORT_ENABLED == tdls_mode) { |
| cmd->state = WMI_TDLS_ENABLE_ACTIVE; |
| } else if (WMA_TDLS_SUPPORT_ACTIVE_EXTERNAL_CONTROL == tdls_mode) { |
| cmd->state = WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL; |
| } else { |
| cmd->state = WMI_TDLS_DISABLE; |
| } |
| |
| cmd->notification_interval_ms = wma_tdls->notification_interval_ms; |
| cmd->tx_discovery_threshold = wma_tdls->tx_discovery_threshold; |
| cmd->tx_teardown_threshold = wma_tdls->tx_teardown_threshold; |
| cmd->rssi_teardown_threshold = wma_tdls->rssi_teardown_threshold; |
| cmd->rssi_delta = wma_tdls->rssi_delta; |
| cmd->tdls_options = wma_tdls->tdls_options; |
| cmd->tdls_peer_traffic_ind_window = |
| wma_tdls->peer_traffic_ind_window; |
| cmd->tdls_peer_traffic_response_timeout_ms = |
| wma_tdls->peer_traffic_response_timeout; |
| cmd->tdls_puapsd_mask = |
| wma_tdls->puapsd_mask; |
| cmd->tdls_puapsd_inactivity_time_ms = |
| wma_tdls->puapsd_inactivity_time; |
| cmd->tdls_puapsd_rx_frame_threshold = |
| wma_tdls->puapsd_rx_frame_threshold; |
| cmd->teardown_notification_ms = |
| wma_tdls->teardown_notification_ms; |
| cmd->tdls_peer_kickout_threshold = |
| wma_tdls->tdls_peer_kickout_threshold; |
| |
| |
| |
| WMA_LOGD("%s: tdls_mode: %d, state: %d, " |
| "notification_interval_ms: %d, " |
| "tx_discovery_threshold: %d, " |
| "tx_teardown_threshold: %d, " |
| "rssi_teardown_threshold: %d, " |
| "rssi_delta: %d, " |
| "tdls_options: 0x%x, " |
| "tdls_peer_traffic_ind_window: %d, " |
| "tdls_peer_traffic_response_timeout: %d, " |
| "tdls_puapsd_mask: 0x%x, " |
| "tdls_puapsd_inactivity_time: %d, " |
| "tdls_puapsd_rx_frame_threshold: %d, " |
| "teardown_notification_ms: %d, " |
| "tdls_peer_kickout_threshold: %d ", |
| __func__, tdls_mode, cmd->state, |
| cmd->notification_interval_ms, |
| cmd->tx_discovery_threshold, |
| cmd->tx_teardown_threshold, |
| cmd->rssi_teardown_threshold, |
| cmd->rssi_delta, |
| cmd->tdls_options, |
| cmd->tdls_peer_traffic_ind_window, |
| cmd->tdls_peer_traffic_response_timeout_ms, |
| cmd->tdls_puapsd_mask, |
| cmd->tdls_puapsd_inactivity_time_ms, |
| cmd->tdls_puapsd_rx_frame_threshold, |
| cmd->teardown_notification_ms, |
| cmd->tdls_peer_kickout_threshold); |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, wmi_buf, len, |
| WMI_TDLS_SET_STATE_CMDID)) { |
| WMA_LOGP("%s: failed to send tdls set state command", __func__); |
| wmi_buf_free(wmi_buf); |
| ret = -EIO; |
| goto end_fw_tdls_state; |
| } |
| WMA_LOGD("%s: vdev_id %d", __func__, wma_tdls->vdev_id); |
| |
| end_fw_tdls_state: |
| if (pwmaTdlsparams) |
| vos_mem_free(pwmaTdlsparams); |
| return ret; |
| } |
| |
| static int wma_update_tdls_peer_state(WMA_HANDLE handle, |
| tTdlsPeerStateParams *peerStateParams) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| wmi_tdls_peer_update_cmd_fixed_param* cmd; |
| wmi_tdls_peer_capabilities *peer_cap; |
| wmi_channel *chan_info; |
| wmi_buf_t wmi_buf; |
| u_int8_t *buf_ptr; |
| u_int32_t i; |
| ol_txrx_pdev_handle pdev; |
| u_int8_t peer_id; |
| struct ol_txrx_peer_t *peer; |
| int32_t len = sizeof(wmi_tdls_peer_update_cmd_fixed_param) + |
| sizeof(wmi_tdls_peer_capabilities); |
| int ret = 0; |
| #if defined(CONFIG_HL_SUPPORT) |
| struct ol_txrx_vdev_t *vdev; |
| bool restore_last_peer = false; |
| #endif |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue cmd", __func__); |
| ret = -EINVAL; |
| goto end_tdls_peer_state; |
| } |
| |
| /* peer capability info is valid only when peer state is connected */ |
| if (WDA_TDLS_PEER_STATE_CONNECTED != peerStateParams->peerState) { |
| vos_mem_zero(&peerStateParams->peerCap, sizeof(tTdlsPeerCapParams)); |
| } |
| |
| len += WMI_TLV_HDR_SIZE + |
| sizeof(wmi_channel) * peerStateParams->peerCap.peerChanLen; |
| |
| wmi_buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| ret = ENOMEM; |
| goto end_tdls_peer_state; |
| } |
| |
| buf_ptr = (u_int8_t *) wmi_buf_data(wmi_buf); |
| cmd = (wmi_tdls_peer_update_cmd_fixed_param *) buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_tdls_peer_update_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_tdls_peer_update_cmd_fixed_param)); |
| |
| cmd->vdev_id = peerStateParams->vdevId; |
| WMI_CHAR_ARRAY_TO_MAC_ADDR(peerStateParams->peerMacAddr, &cmd->peer_macaddr); |
| |
| switch (peerStateParams->peerState) { |
| case WDA_TDLS_PEER_STATE_PEERING: |
| cmd->peer_state = WMI_TDLS_PEER_STATE_PEERING; |
| break; |
| case WDA_TDLS_PEER_STATE_CONNECTED: |
| cmd->peer_state = WMI_TDLS_PEER_STATE_CONNECTED; |
| break; |
| case WDA_TDLS_PEER_STATE_TEARDOWN: |
| cmd->peer_state = WMI_TDLS_PEER_STATE_TEARDOWN; |
| break; |
| case WDA_TDLS_PEER_ADD_MAC_ADDR: |
| cmd->peer_state = WMI_TDLS_PEER_ADD_MAC_ADDR; |
| break; |
| case WDA_TDLS_PEER_REMOVE_MAC_ADDR: |
| cmd->peer_state = WMI_TDLS_PEER_REMOVE_MAC_ADDR; |
| break; |
| |
| } |
| |
| WMA_LOGD("%s: vdev_id: %d, peerStateParams->peerMacAddr: %pM, " |
| "peer_macaddr.mac_addr31to0: 0x%x, " |
| "peer_macaddr.mac_addr47to32: 0x%x, peer_state: %d", |
| __func__, cmd->vdev_id, peerStateParams->peerMacAddr, |
| cmd->peer_macaddr.mac_addr31to0, |
| cmd->peer_macaddr.mac_addr47to32, cmd->peer_state); |
| |
| buf_ptr += sizeof(wmi_tdls_peer_update_cmd_fixed_param); |
| peer_cap = (wmi_tdls_peer_capabilities *) buf_ptr; |
| WMITLV_SET_HDR(&peer_cap->tlv_header, |
| WMITLV_TAG_STRUC_wmi_tdls_peer_capabilities, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_tdls_peer_capabilities)); |
| |
| if ((peerStateParams->peerCap.peerUapsdQueue & 0x08) >> 3) |
| WMI_SET_TDLS_PEER_VO_UAPSD(peer_cap); |
| if ((peerStateParams->peerCap.peerUapsdQueue & 0x04) >> 2) |
| WMI_SET_TDLS_PEER_VI_UAPSD(peer_cap); |
| if ((peerStateParams->peerCap.peerUapsdQueue & 0x02) >> 1) |
| WMI_SET_TDLS_PEER_BK_UAPSD(peer_cap); |
| if (peerStateParams->peerCap.peerUapsdQueue & 0x01) |
| WMI_SET_TDLS_PEER_BE_UAPSD(peer_cap); |
| |
| /* Ack and More Data Ack are sent as 0, so no need to set |
| * but fill SP |
| */ |
| WMI_SET_TDLS_PEER_SP_UAPSD(peer_cap, peerStateParams->peerCap.peerMaxSp); |
| |
| peer_cap->buff_sta_support = |
| peerStateParams->peerCap.peerBuffStaSupport; |
| peer_cap->off_chan_support = |
| peerStateParams->peerCap.peerOffChanSupport; |
| peer_cap->peer_curr_operclass = |
| peerStateParams->peerCap.peerCurrOperClass; |
| /* self curr operclass is not being used and so pass op class for |
| * preferred off chan in it. |
| */ |
| peer_cap->self_curr_operclass = |
| peerStateParams->peerCap.opClassForPrefOffChan; |
| peer_cap->peer_chan_len = |
| peerStateParams->peerCap.peerChanLen; |
| peer_cap->peer_operclass_len = |
| peerStateParams->peerCap.peerOperClassLen; |
| |
| WMA_LOGD("%s: peer_operclass_len: %d", |
| __func__, peer_cap->peer_operclass_len); |
| for (i = 0; i < WMI_TDLS_MAX_SUPP_OPER_CLASSES; i++) { |
| peer_cap->peer_operclass[i] = |
| peerStateParams->peerCap.peerOperClass[i]; |
| WMA_LOGD("%s: peer_operclass[%d]: %d", |
| __func__, i, peer_cap->peer_operclass[i]); |
| } |
| |
| peer_cap->is_peer_responder = |
| peerStateParams->peerCap.isPeerResponder; |
| peer_cap->pref_offchan_num = |
| peerStateParams->peerCap.prefOffChanNum; |
| peer_cap->pref_offchan_bw = |
| peerStateParams->peerCap.prefOffChanBandwidth; |
| |
| WMA_LOGD("%s: peer_qos: 0x%x, buff_sta_support: %d, off_chan_support: %d, peer_curr_operclass: %d, self_curr_operclass: %d, peer_chan_len: %d, peer_operclass_len: %d, is_peer_responder: %d, pref_offchan_num: %d, pref_offchan_bw: %d", |
| __func__, peer_cap->peer_qos, peer_cap->buff_sta_support, |
| peer_cap->off_chan_support, peer_cap->peer_curr_operclass, |
| peer_cap->self_curr_operclass, peer_cap->peer_chan_len, |
| peer_cap->peer_operclass_len, peer_cap->is_peer_responder, |
| peer_cap->pref_offchan_num, peer_cap->pref_offchan_bw); |
| |
| /* next fill variable size array of peer chan info */ |
| buf_ptr += sizeof(wmi_tdls_peer_capabilities); |
| WMITLV_SET_HDR(buf_ptr, |
| WMITLV_TAG_ARRAY_STRUC, |
| sizeof(wmi_channel) * peerStateParams->peerCap.peerChanLen); |
| chan_info = (wmi_channel *) (buf_ptr + WMI_TLV_HDR_SIZE); |
| |
| for (i = 0; i < peerStateParams->peerCap.peerChanLen; ++i) { |
| WMITLV_SET_HDR(&chan_info->tlv_header, |
| WMITLV_TAG_STRUC_wmi_channel, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_channel)); |
| chan_info->mhz = |
| vos_chan_to_freq(peerStateParams->peerCap.peerChan[i].chanId); |
| chan_info->band_center_freq1 = chan_info->mhz; |
| chan_info->band_center_freq2 = 0; |
| |
| if (peerStateParams->peerCap.peerChan[i].dfsSet) { |
| WMI_SET_CHANNEL_FLAG(chan_info, WMI_CHAN_FLAG_PASSIVE); |
| } |
| |
| if (chan_info->mhz < WMA_2_4_GHZ_MAX_FREQ) { |
| WMI_SET_CHANNEL_MODE(chan_info, MODE_11G); |
| } else { |
| WMI_SET_CHANNEL_MODE(chan_info, MODE_11A); |
| } |
| |
| WMI_SET_CHANNEL_MAX_TX_POWER(chan_info, |
| peerStateParams->peerCap.peerChan[i].pwr); |
| |
| WMI_SET_CHANNEL_REG_POWER(chan_info, |
| peerStateParams->peerCap.peerChan[i].pwr); |
| WMA_LOGD(FL("Channel %u[%d] DFS[%d] TX power = %d"), |
| chan_info->mhz, i, |
| peerStateParams->peerCap.peerChan[i].dfsSet, |
| peerStateParams->peerCap.peerChan[i].pwr); |
| |
| chan_info++; |
| } |
| |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, wmi_buf, len, |
| WMI_TDLS_PEER_UPDATE_CMDID)) { |
| WMA_LOGE("%s: failed to send tdls peer update state command", |
| __func__); |
| wmi_buf_free(wmi_buf); |
| ret = -EIO; |
| goto end_tdls_peer_state; |
| } |
| |
| /* in case of teardown, remove peer from fw */ |
| if (WDA_TDLS_PEER_STATE_TEARDOWN == peerStateParams->peerState) { |
| pdev = vos_get_context(VOS_MODULE_ID_TXRX, wma_handle->vos_context); |
| if (!pdev) { |
| WMA_LOGE("%s: Failed to find pdev", __func__); |
| ret = -EIO; |
| goto end_tdls_peer_state; |
| } |
| |
| peer = ol_txrx_find_peer_by_addr(pdev, peerStateParams->peerMacAddr, |
| &peer_id); |
| if (!peer) { |
| WMA_LOGE("%s: Failed to get peer handle using peer mac %pM", |
| __func__, peerStateParams->peerMacAddr); |
| ret = -EIO; |
| goto end_tdls_peer_state; |
| } |
| |
| #if defined(CONFIG_HL_SUPPORT) |
| vdev = peer->vdev; |
| if (vdev->last_real_peer && (vdev->last_real_peer == peer)) |
| restore_last_peer = true; |
| #endif |
| |
| WMA_LOGD("%s: calling wma_remove_peer for peer " MAC_ADDRESS_STR |
| " vdevId: %d", __func__, |
| MAC_ADDR_ARRAY(peer->mac_addr.raw), peerStateParams->vdevId); |
| wma_remove_peer(wma_handle, peer->mac_addr.raw, |
| peerStateParams->vdevId, peer, |
| VOS_FALSE); |
| #if defined(CONFIG_HL_SUPPORT) |
| if (restore_last_peer && (vdev->last_real_peer == NULL)) { |
| peer = NULL; |
| peer = ol_txrx_find_peer_by_addr(pdev, vdev->hl_tdls_ap_mac_addr.raw, &peer_id); |
| if (peer && (peer->peer_ids[0] != HTT_INVALID_PEER_ID)) |
| vdev->last_real_peer = peer; |
| } |
| #endif |
| } |
| |
| end_tdls_peer_state: |
| if (peerStateParams) |
| vos_mem_free(peerStateParams); |
| return ret; |
| } |
| #endif /* FEATURE_WLAN_TDLS */ |
| |
| /* |
| * Attach DFS methods to the umac state. |
| */ |
| struct ieee80211com* wma_dfs_attach(struct ieee80211com *dfs_ic) |
| { |
| /*Allocate memory for dfs_ic before passing it up to dfs_attach()*/ |
| dfs_ic = (struct ieee80211com *) |
| OS_MALLOC(NULL, sizeof(struct ieee80211com), GFP_ATOMIC); |
| if (dfs_ic == NULL) |
| { |
| WMA_LOGE("%s:Allocation of dfs_ic failed %zu", |
| __func__, sizeof(struct ieee80211com)); |
| return NULL; |
| } |
| OS_MEMZERO(dfs_ic, sizeof (struct ieee80211com)); |
| /* DFS pattern matching hooks */ |
| dfs_ic->ic_dfs_attach = ol_if_dfs_attach; |
| dfs_ic->ic_dfs_disable = ol_if_dfs_disable; |
| dfs_ic->ic_find_channel = ieee80211_find_channel; |
| dfs_ic->ic_dfs_enable = ol_if_dfs_enable; |
| dfs_ic->ic_ieee2mhz = ieee80211_ieee2mhz; |
| |
| /* Hardware facing hooks */ |
| dfs_ic->ic_get_ext_busy = ol_if_dfs_get_ext_busy; |
| dfs_ic->ic_get_mib_cycle_counts_pct = |
| ol_if_dfs_get_mib_cycle_counts_pct; |
| dfs_ic->ic_get_TSF64 = ol_if_get_tsf64; |
| |
| /* NOL related hooks */ |
| dfs_ic->ic_dfs_usenol = ol_if_dfs_usenol; |
| /* |
| * Hooks from wma/dfs/ back |
| * into the PE/SME |
| * and shared DFS code |
| */ |
| dfs_ic->ic_dfs_notify_radar = ieee80211_mark_dfs; |
| dfs_ic->ic_update_dfs_cac_block_tx = ieee80211_update_dfs_cac_block_tx; |
| adf_os_spinlock_init(&dfs_ic->chan_lock); |
| /* Initializes DFS Data Structures and queues*/ |
| dfs_attach(dfs_ic); |
| |
| return dfs_ic; |
| } |
| |
| #ifdef ATH_SUPPORT_DFS |
| /* |
| * Configures Radar Filters during |
| * vdev start/channel change/regulatory domain |
| * change.This Configuration enables to program |
| * the DFS pattern matching module. |
| */ |
| void wma_dfs_configure(struct ieee80211com *ic) |
| { |
| struct ath_dfs_radar_tab_info rinfo; |
| int dfsdomain; |
| int radar_enabled_status = 0; |
| if(ic == NULL) { |
| WMA_LOGE("%s: DFS ic is Invalid",__func__); |
| return; |
| } |
| |
| dfsdomain = ic->current_dfs_regdomain; |
| |
| /* Fetch current radar patterns from the lmac */ |
| OS_MEMZERO(&rinfo, sizeof(rinfo)); |
| |
| /* |
| * Look up the current DFS |
| * regulatory domain and decide |
| * which radar pulses to use. |
| */ |
| switch (dfsdomain) |
| { |
| case DFS_FCC_DOMAIN: |
| WMA_LOGI("%s: DFS-FCC domain",__func__); |
| rinfo.dfsdomain = DFS_FCC_DOMAIN; |
| rinfo.dfs_radars = dfs_fcc_radars; |
| rinfo.numradars = ARRAY_LENGTH(dfs_fcc_radars); |
| rinfo.b5pulses = dfs_fcc_bin5pulses; |
| rinfo.numb5radars = ARRAY_LENGTH(dfs_fcc_bin5pulses); |
| break; |
| case DFS_ETSI_DOMAIN: |
| WMA_LOGI("%s: DFS-ETSI domain",__func__); |
| rinfo.dfsdomain = DFS_ETSI_DOMAIN; |
| rinfo.dfs_radars = dfs_etsi_radars; |
| rinfo.numradars = ARRAY_LENGTH(dfs_etsi_radars); |
| rinfo.b5pulses = NULL; |
| rinfo.numb5radars = 0; |
| break; |
| case DFS_MKK4_DOMAIN: |
| WMA_LOGI("%s: DFS-MKK4 domain",__func__); |
| rinfo.dfsdomain = DFS_MKK4_DOMAIN; |
| rinfo.dfs_radars = dfs_mkk4_radars; |
| rinfo.numradars = ARRAY_LENGTH(dfs_mkk4_radars); |
| rinfo.b5pulses = dfs_jpn_bin5pulses; |
| rinfo.numb5radars = ARRAY_LENGTH(dfs_jpn_bin5pulses); |
| break; |
| default: |
| WMA_LOGI("%s: DFS-UNINT domain",__func__); |
| rinfo.dfsdomain = DFS_UNINIT_DOMAIN; |
| rinfo.dfs_radars = NULL; |
| rinfo.numradars = 0; |
| rinfo.b5pulses = NULL; |
| rinfo.numb5radars = 0; |
| break; |
| } |
| |
| rinfo.dfs_pri_multiplier = ic->dfs_pri_multiplier; |
| |
| |
| /* |
| * Set the regulatory domain, |
| * radar pulse table and enable |
| * radar events if required. |
| * dfs_radar_enable() returns |
| * 0 on success and non-zero |
| * failure. |
| */ |
| radar_enabled_status = dfs_radar_enable(ic, &rinfo); |
| if (radar_enabled_status != DFS_STATUS_SUCCESS) { |
| WMA_LOGE("%s[%d]: DFS- Radar Detection Enabling Failed", |
| __func__, __LINE__); |
| } |
| } |
| |
| /* |
| * Set the Channel parameters in to DFS module |
| * Also,configure the DFS radar filters for |
| * matching the DFS phyerrors. |
| */ |
| struct ieee80211_channel * |
| wma_dfs_configure_channel(struct ieee80211com *dfs_ic, |
| wmi_channel *chan, |
| WLAN_PHY_MODE chanmode, |
| struct wma_vdev_start_req *req) |
| { |
| if(dfs_ic == NULL) |
| { |
| WMA_LOGE("%s: DFS ic is Invalid",__func__); |
| return NULL; |
| } |
| |
| |
| if (!dfs_ic->ic_curchan) { |
| dfs_ic->ic_curchan = (struct ieee80211_channel *) OS_MALLOC(NULL, |
| sizeof(struct ieee80211_channel), |
| GFP_ATOMIC); |
| if (dfs_ic->ic_curchan == NULL) { |
| WMA_LOGE("%s: allocation of dfs_ic->ic_curchan failed %zu", |
| __func__, sizeof(struct ieee80211_channel)); |
| return NULL; |
| } |
| } |
| |
| OS_MEMZERO(dfs_ic->ic_curchan, sizeof (struct ieee80211_channel)); |
| |
| dfs_ic->ic_curchan->ic_ieee = req->chan; |
| dfs_ic->ic_curchan->ic_freq = chan->mhz; |
| |
| if (chan->band_center_freq1 != 0) |
| dfs_ic->ic_curchan->ic_vhtop_ch_freq_seg1 = chan->band_center_freq1; |
| else { |
| dfs_ic->ic_curchan->ic_vhtop_ch_freq_seg1 = chan->mhz; |
| if (chanmode == MODE_11AC_VHT80) |
| chan->band_center_freq1 = vos_chan_to_freq( |
| wma_getCenterChannel( |
| chan->mhz, |
| req->chan_offset)); |
| if ((chanmode == MODE_11NG_HT40) || |
| (chanmode == MODE_11AC_VHT40) || |
| (chanmode == MODE_11AC_VHT40_2G)) { |
| if (req->chan_offset == PHY_DOUBLE_CHANNEL_LOW_PRIMARY) |
| chan->band_center_freq1 += 10; |
| else |
| chan->band_center_freq1 -= 10; |
| } |
| if (chanmode == MODE_11NA_HT40) { |
| if (req->chan_offset == PHY_DOUBLE_CHANNEL_LOW_PRIMARY) |
| chan->band_center_freq1 += 10; |
| else |
| chan->band_center_freq1 -= 10; |
| } |
| dfs_ic->ic_curchan->ic_vhtop_ch_freq_seg1 = chan->band_center_freq1; |
| } |
| dfs_ic->ic_curchan->ic_vhtop_ch_freq_seg2 = chan->band_center_freq2; |
| dfs_ic->ic_curchan->ic_pri_freq_center_freq_mhz_separation = |
| dfs_ic->ic_curchan->ic_freq - |
| dfs_ic->ic_curchan->ic_vhtop_ch_freq_seg1; |
| |
| if ( (dfs_ic->ic_curchan->ic_ieee >= WMA_11A_CHANNEL_BEGIN) && |
| (dfs_ic->ic_curchan->ic_ieee <= WMA_11A_CHANNEL_END) ) |
| { |
| dfs_ic->ic_curchan->ic_flags |= IEEE80211_CHAN_5GHZ; |
| } |
| if(chanmode == MODE_11AC_VHT80) |
| { |
| dfs_ic->ic_curchan->ic_flags |= IEEE80211_CHAN_VHT80; |
| } |
| if (req->chan_offset == PHY_DOUBLE_CHANNEL_LOW_PRIMARY) |
| { |
| dfs_ic->ic_curchan->ic_flags |= |
| (req->vht_capable ? |
| IEEE80211_CHAN_VHT40PLUS : IEEE80211_CHAN_HT40PLUS); |
| } |
| else if (req->chan_offset == PHY_DOUBLE_CHANNEL_HIGH_PRIMARY) |
| { |
| dfs_ic->ic_curchan->ic_flags |= |
| (req->vht_capable ? |
| IEEE80211_CHAN_VHT40MINUS : IEEE80211_CHAN_HT40MINUS); |
| } |
| else if (req->chan_offset == PHY_SINGLE_CHANNEL_CENTERED) |
| { |
| dfs_ic->ic_curchan->ic_flags |= |
| (req->vht_capable ? IEEE80211_CHAN_VHT20 : IEEE80211_CHAN_HT20); |
| } |
| dfs_ic->ic_curchan->ic_flagext |= IEEE80211_CHAN_DFS; |
| |
| if (req->oper_mode == BSS_OPERATIONAL_MODE_AP) |
| { |
| dfs_ic->ic_opmode = IEEE80211_M_HOSTAP; |
| dfs_ic->vdev_id = req->vdev_id; |
| } |
| |
| dfs_ic->dfs_pri_multiplier = req->dfs_pri_multiplier; |
| |
| /* |
| * Configuring the DFS with current channel and the radar filters |
| */ |
| wma_dfs_configure(dfs_ic); |
| WMA_LOGI("%s: DFS- CHANNEL CONFIGURED",__func__); |
| return dfs_ic->ic_curchan; |
| } |
| /* |
| * Configure the regulatory domain for DFS radar filter initialization |
| */ |
| void wma_set_dfs_regdomain(tp_wma_handle wma, uint8_t dfs_region) |
| { |
| /* dfs information is passed */ |
| if (dfs_region > DFS_MKK4_DOMAIN || dfs_region == DFS_UNINIT_DOMAIN) |
| /* assign DFS_FCC_DOMAIN as default domain*/ |
| wma->dfs_ic->current_dfs_regdomain = DFS_FCC_DOMAIN; |
| else |
| wma->dfs_ic->current_dfs_regdomain = dfs_region; |
| |
| WMA_LOGI("%s: DFS Region Domain: %d", __func__, |
| wma->dfs_ic->current_dfs_regdomain); |
| } |
| #else |
| void wma_dfs_configure(struct ieee80211com *ic) |
| { |
| } |
| void wma_set_dfs_regdomain(tp_wma_handle wma, uint8_t dfs_region) |
| { |
| } |
| struct ieee80211_channel * |
| wma_dfs_configure_channel(struct ieee80211com *dfs_ic, |
| wmi_channel *chan, |
| WLAN_PHY_MODE chanmode, |
| struct wma_vdev_start_req *req) |
| { |
| return NULL; |
| } |
| #endif |
| |
| int wma_get_channels(struct ieee80211_channel *ichan, |
| struct wma_dfs_radar_channel_list *chan_list) |
| { |
| uint8_t center_chan = vos_freq_to_chan(ichan->ic_vhtop_ch_freq_seg1); |
| |
| chan_list->nchannels = 0; |
| |
| if (IEEE80211_IS_CHAN_11AC_VHT80(ichan)) |
| { |
| chan_list->nchannels= 4; |
| chan_list->channels[0] = center_chan - 6; |
| chan_list->channels[1] = center_chan - 2; |
| chan_list->channels[2] = center_chan + 2; |
| chan_list->channels[3] = center_chan + 6; |
| } |
| else if(IEEE80211_IS_CHAN_11N_HT40(ichan) || |
| IEEE80211_IS_CHAN_11AC_VHT40(ichan)) |
| { |
| chan_list->nchannels = 2; |
| chan_list->channels[0] = center_chan - 2; |
| chan_list->channels[1] = center_chan + 2; |
| } |
| else |
| { |
| chan_list->nchannels = 1; |
| chan_list->channels[0] = center_chan; |
| } |
| |
| return chan_list->nchannels; |
| } |
| |
| void wma_update_dfs_cac_block_tx(bool cac_block_tx) |
| { |
| tp_wma_handle wma; |
| void *hdd_ctx; |
| void *vos_context; |
| |
| vos_context = vos_get_global_context(VOS_MODULE_ID_VOSS, NULL); |
| if (!vos_context) { |
| WMA_LOGE("%s: VOS context is invald!", __func__); |
| return; |
| } |
| |
| wma = (tp_wma_handle) vos_get_context(VOS_MODULE_ID_WDA, vos_context); |
| |
| if (wma == NULL) { |
| WMA_LOGE("%s: DFS- Invalid wma", __func__); |
| return; |
| } |
| hdd_ctx = vos_get_context(VOS_MODULE_ID_HDD, wma->vos_context); |
| wma->dfs_block_tx_cb(hdd_ctx, cac_block_tx); |
| } |
| |
| /* |
| * Indicate Radar to SAP/HDD |
| */ |
| int wma_dfs_indicate_radar(struct ieee80211com *ic, |
| struct ieee80211_channel *ichan) |
| { |
| tp_wma_handle wma; |
| void *hdd_ctx; |
| struct wma_dfs_radar_indication *radar_event; |
| struct hdd_dfs_radar_ind hdd_radar_event; |
| void *vos_context = vos_get_global_context(VOS_MODULE_ID_WDA, NULL); |
| tpAniSirGlobal pmac = NULL; |
| bool indication_status; |
| |
| wma = (tp_wma_handle) vos_get_context(VOS_MODULE_ID_WDA, vos_context); |
| |
| if (wma == NULL) |
| { |
| WMA_LOGE("%s: DFS- Invalid wma", __func__); |
| return -ENOENT; |
| } |
| |
| hdd_ctx = vos_get_context(VOS_MODULE_ID_HDD,wma->vos_context); |
| pmac = (tpAniSirGlobal) |
| vos_get_context(VOS_MODULE_ID_PE, wma->vos_context); |
| if (!pmac) { |
| WMA_LOGE("%s:Invalid MAC handle", __func__); |
| return -ENOENT; |
| } |
| |
| if (wma->dfs_ic != ic) |
| { |
| WMA_LOGE("%s:DFS- Invalid WMA handle", __func__); |
| return -ENOENT; |
| } |
| |
| /* |
| * Do not post multiple Radar events on the same channel. |
| * But, when DFS test mode is enabled, allow multiple dfs |
| * radar events to be posted on the same channel. |
| */ |
| adf_os_spin_lock_bh(&ic->chan_lock); |
| if (!pmac->sap.SapDfsInfo.disable_dfs_ch_switch) |
| wma->dfs_ic->disable_phy_err_processing = true; |
| |
| if ((ichan->ic_ieee != (wma->dfs_ic->last_radar_found_chan)) || |
| ( pmac->sap.SapDfsInfo.disable_dfs_ch_switch == VOS_TRUE) ) |
| { |
| radar_event = (struct wma_dfs_radar_indication *) |
| vos_mem_malloc(sizeof(*radar_event)); |
| if (radar_event == NULL) { |
| WMA_LOGE(FL("Failed to allocate memory for radar_event")); |
| adf_os_spin_unlock_bh(&ic->chan_lock); |
| return -ENOMEM; |
| } |
| |
| /* Indicate the radar event to HDD to stop the netif Tx queues*/ |
| hdd_radar_event.ieee_chan_number = ichan->ic_ieee; |
| hdd_radar_event.chan_freq = ichan->ic_freq; |
| hdd_radar_event.dfs_radar_status = WMA_DFS_RADAR_FOUND; |
| indication_status = |
| wma->dfs_radar_indication_cb(hdd_ctx,&hdd_radar_event); |
| if (indication_status == false) |
| { |
| WMA_LOGE("%s:Application triggered channel switch in progress!.. drop radar event indiaction to SAP", |
| __func__); |
| vos_mem_free(radar_event); |
| adf_os_spin_unlock_bh(&ic->chan_lock); |
| return 0; |
| } |
| else |
| WMA_LOGE("%s:DFS- RADAR INDICATED TO HDD",__func__); |
| |
| wma->dfs_ic->last_radar_found_chan = ichan->ic_ieee; |
| /* |
| * Indicate to the radar event to SAP to |
| * select a new channel and set CSA IE |
| */ |
| radar_event->vdev_id = ic->vdev_id; |
| wma_get_channels(ichan, &radar_event->chan_list); |
| radar_event->dfs_radar_status = WMA_DFS_RADAR_FOUND; |
| radar_event->use_nol = ic->ic_dfs_usenol(ic); |
| wma_send_msg(wma, WDA_DFS_RADAR_IND, (void *)radar_event, 0); |
| WMA_LOGE("%s:DFS- WDA_DFS_RADAR_IND Message Posted",__func__); |
| } |
| |
| adf_os_spin_unlock_bh(&ic->chan_lock); |
| return 0; |
| } |
| |
| static eHalStatus wma_set_smps_params(tp_wma_handle wma, tANI_U8 vdev_id, int value) |
| { |
| int ret = eHAL_STATUS_SUCCESS; |
| wmi_sta_smps_param_cmd_fixed_param *cmd; |
| wmi_buf_t buf; |
| u_int16_t len = sizeof(*cmd); |
| |
| buf = wmi_buf_alloc(wma->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE("%s:wmi_buf_alloc failed", __func__); |
| return -ENOMEM; |
| } |
| cmd = (wmi_sta_smps_param_cmd_fixed_param *) wmi_buf_data(buf); |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_sta_smps_param_cmd_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN( |
| wmi_sta_smps_param_cmd_fixed_param)); |
| |
| cmd->vdev_id = vdev_id; |
| cmd->value = value & WMA_SMPS_MASK_LOWER_16BITS; |
| cmd->param = (value >> WMA_SMPS_PARAM_VALUE_S) & WMA_SMPS_MASK_UPPER_3BITS; |
| |
| WMA_LOGD("Setting vdev %d value = %x param %x", vdev_id, cmd->value, cmd->param); |
| |
| ret = wmi_unified_cmd_send(wma->wmi_handle, buf, len, |
| WMI_STA_SMPS_PARAM_CMDID); |
| if (ret < 0) { |
| WMA_LOGE("Failed to send set Mimo PS ret = %d", ret); |
| wmi_buf_free(buf); |
| } |
| |
| return ret; |
| } |
| |
| VOS_STATUS WMA_GetWcnssSoftwareVersion(v_PVOID_t pvosGCtx, |
| tANI_U8 *pVersion, |
| tANI_U32 versionBufferSize) |
| { |
| |
| tp_wma_handle wma_handle; |
| wma_handle = vos_get_context(VOS_MODULE_ID_WDA, pvosGCtx); |
| |
| if (NULL == wma_handle) { |
| WMA_LOGE("%s: Failed to get wma", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| snprintf(pVersion, versionBufferSize, "%x", (unsigned int)wma_handle->target_fw_version); |
| return VOS_STATUS_SUCCESS; |
| } |
| |
| #ifdef HL_RX_AGGREGATION_HOLE_DETCTION |
| /** |
| * ol_rx_aggregation_hole - ol rx aggregation hole report |
| * @hole_info: hole_info |
| * |
| * Return: void |
| */ |
| void ol_rx_aggregation_hole(uint32_t hole_info) |
| { |
| struct sir_sme_rx_aggr_hole_ind *rx_aggr_hole_event; |
| uint32_t alloc_len; |
| vos_msg_t vos_msg; |
| VOS_STATUS status; |
| |
| alloc_len = sizeof(*rx_aggr_hole_event) + |
| sizeof(rx_aggr_hole_event->hole_info_array[0]); |
| rx_aggr_hole_event = vos_mem_malloc(alloc_len); |
| if (NULL == rx_aggr_hole_event) { |
| WMA_LOGE("%s: Memory allocation failure", __func__); |
| return; |
| } |
| |
| rx_aggr_hole_event->hole_cnt = 1; |
| rx_aggr_hole_event->hole_info_array[0] = hole_info; |
| |
| vos_msg.type = eWNI_SME_RX_AGGR_HOLE_IND; |
| vos_msg.bodyptr = rx_aggr_hole_event; |
| vos_msg.bodyval = 0; |
| |
| status = vos_mq_post_message(VOS_MQ_ID_SME, &vos_msg); |
| if (status != VOS_STATUS_SUCCESS) { |
| WMA_LOGE("%s: Failed to post aggr event to SME", __func__); |
| vos_mem_free(rx_aggr_hole_event); |
| return; |
| } |
| } |
| #endif |
| |
| void ol_rx_err(ol_pdev_handle pdev, u_int8_t vdev_id, |
| u_int8_t *peer_mac_addr, int tid, u_int32_t tsf32, |
| enum ol_rx_err_type err_type, adf_nbuf_t rx_frame, |
| u_int64_t *pn, u_int8_t key_id) |
| { |
| void *g_vos_ctx = vos_get_global_context(VOS_MODULE_ID_WDA, NULL); |
| tp_wma_handle wma = vos_get_context(VOS_MODULE_ID_WDA, g_vos_ctx); |
| tpSirSmeMicFailureInd mic_err_ind; |
| struct ether_header *eth_hdr; |
| |
| if (NULL == wma) { |
| WMA_LOGE("%s: Failed to get wma", __func__); |
| return; |
| } |
| |
| if (err_type != OL_RX_ERR_TKIP_MIC) |
| return; |
| |
| if (adf_nbuf_len(rx_frame) < sizeof(*eth_hdr)) |
| return; |
| eth_hdr = (struct ether_header *) adf_nbuf_data(rx_frame); |
| mic_err_ind = vos_mem_malloc(sizeof(*mic_err_ind)); |
| if (!mic_err_ind) { |
| WMA_LOGE("%s: Failed to allocate memory for MIC indication message", __func__); |
| return; |
| } |
| adf_os_mem_set((void *) mic_err_ind, 0, sizeof(*mic_err_ind)); |
| |
| mic_err_ind->messageType = eWNI_SME_MIC_FAILURE_IND; |
| mic_err_ind->length = sizeof(*mic_err_ind); |
| adf_os_mem_copy(mic_err_ind->bssId, |
| (v_MACADDR_t *) wma->interfaces[vdev_id].bssid, |
| sizeof(tSirMacAddr)); |
| adf_os_mem_copy(mic_err_ind->info.taMacAddr, |
| (v_MACADDR_t *) peer_mac_addr, sizeof(tSirMacAddr)); |
| adf_os_mem_copy(mic_err_ind->info.srcMacAddr, |
| (v_MACADDR_t *) eth_hdr->ether_shost, sizeof(tSirMacAddr)); |
| adf_os_mem_copy(mic_err_ind->info.dstMacAddr, |
| (v_MACADDR_t *) eth_hdr->ether_dhost, sizeof(tSirMacAddr)); |
| mic_err_ind->info.keyId = key_id; |
| mic_err_ind->info.multicast = IEEE80211_IS_MULTICAST(eth_hdr->ether_dhost); |
| adf_os_mem_copy(mic_err_ind->info.TSC, pn, SIR_CIPHER_SEQ_CTR_SIZE); |
| wma_send_msg(wma, SIR_HAL_MIC_FAILURE_IND, (void *) mic_err_ind, 0); |
| } |
| |
| void |
| ol_indicate_err( |
| enum ol_rx_err_type err_type, |
| struct ol_error_info * err_info) |
| { |
| switch (err_type) { |
| case OL_RX_ERR_TKIP_MIC: |
| { |
| void *g_vos_ctx = vos_get_global_context(VOS_MODULE_ID_WDA, NULL); |
| tp_wma_handle wma = vos_get_context(VOS_MODULE_ID_WDA, g_vos_ctx); |
| tpSirSmeMicFailureInd mic_err_ind; |
| |
| if (!wma) { |
| WMA_LOGE("%s: MIC error: Null wma handle", |
| __func__); |
| return; |
| } |
| |
| mic_err_ind = vos_mem_malloc(sizeof(*mic_err_ind)); |
| if (!mic_err_ind) { |
| WMA_LOGE("%s: Failed to allocate memory for MIC indication message", __func__); |
| return; |
| } |
| adf_os_mem_set((void *) mic_err_ind, 0, sizeof(*mic_err_ind)); |
| mic_err_ind->messageType = eWNI_SME_MIC_FAILURE_IND; |
| mic_err_ind->length = sizeof(*mic_err_ind); |
| adf_os_mem_copy(mic_err_ind->bssId, |
| (v_MACADDR_t *) wma->interfaces[err_info->u.mic_err.vdev_id].bssid, |
| sizeof(tSirMacAddr)); |
| WMA_LOGE("MIC error: BSSID:%02x:%02x:%02x:%02x:%02x:%02x\n", |
| mic_err_ind->bssId[0], mic_err_ind->bssId[1], |
| mic_err_ind->bssId[2], mic_err_ind->bssId[3], |
| mic_err_ind->bssId[4], mic_err_ind->bssId[5]); |
| adf_os_mem_copy(mic_err_ind->info.taMacAddr, |
| (v_MACADDR_t *) err_info->u.mic_err.ta, sizeof(tSirMacAddr)); |
| adf_os_mem_copy(mic_err_ind->info.srcMacAddr, |
| (v_MACADDR_t *) err_info->u.mic_err.sa, sizeof(tSirMacAddr)); |
| adf_os_mem_copy(mic_err_ind->info.dstMacAddr, |
| (v_MACADDR_t *) err_info->u.mic_err.da, sizeof(tSirMacAddr)); |
| mic_err_ind->info.keyId = err_info->u.mic_err.key_id; |
| mic_err_ind->info.multicast = |
| IEEE80211_IS_MULTICAST(err_info->u.mic_err.da); |
| adf_os_mem_copy(mic_err_ind->info.TSC, (void*)&err_info-> |
| u.mic_err.pn, SIR_CIPHER_SEQ_CTR_SIZE); |
| wma_send_msg(wma, SIR_HAL_MIC_FAILURE_IND, (void *) mic_err_ind, 0); |
| break; |
| } |
| default: |
| { |
| WMA_LOGE("%s: unhandled ol error type %d", __func__, err_type); |
| break; |
| } |
| } |
| } |
| |
| void WDA_TxAbort(v_U8_t vdev_id) |
| { |
| #define PEER_ALL_TID_BITMASK 0xffffffff |
| tp_wma_handle wma; |
| u_int32_t peer_tid_bitmap = PEER_ALL_TID_BITMASK; |
| struct wma_txrx_node *iface; |
| |
| wma = vos_get_context(VOS_MODULE_ID_WDA, |
| vos_get_global_context(VOS_MODULE_ID_WDA, NULL)); |
| if (NULL == wma) { |
| WMA_LOGE("%s: wma is NULL", __func__); |
| return; |
| } |
| |
| iface = &wma->interfaces[vdev_id]; |
| if (!iface->handle) { |
| WMA_LOGE("%s: Failed to get iface handle: %pK", |
| __func__, iface->handle); |
| return; |
| } |
| WMA_LOGI("%s: vdevid %d bssid %pM", __func__, vdev_id, iface->bssid); |
| iface->pause_bitmap |= (1 << PAUSE_TYPE_HOST); |
| wdi_in_vdev_pause(iface->handle, OL_TXQ_PAUSE_REASON_TX_ABORT); |
| |
| /* Flush all TIDs except MGMT TID for this peer in Target */ |
| peer_tid_bitmap &= ~(0x1 << WMI_MGMT_TID); |
| wmi_unified_peer_flush_tids_send(wma->wmi_handle, iface->bssid, |
| peer_tid_bitmap, vdev_id); |
| } |
| |
| static void wma_set_vdev_suspend_dtim(tp_wma_handle wma, v_U8_t vdev_id) |
| { |
| struct wma_txrx_node *iface = &wma->interfaces[vdev_id]; |
| enum powersave_qpower_mode qpower_config = wma_get_qpower_config(wma); |
| |
| if ((iface->type == WMI_VDEV_TYPE_STA) && |
| (iface->dtimPeriod != 0)) { |
| int32_t ret; |
| u_int32_t listen_interval; |
| u_int32_t max_mod_dtim; |
| u_int32_t beacon_interval_mod; |
| |
| if (wma->staDynamicDtim) { |
| listen_interval = wma->staDynamicDtim; |
| } else if ((wma->staModDtim) && |
| (wma->staMaxLIModDtim)) { |
| /* |
| * When the system is in suspend |
| * (maximum beacon will be at 1s == 10) |
| * If maxModulatedDTIM ((MAX_LI_VAL = 10) / AP_DTIM) |
| * equal or larger than MDTIM (configured in WCNSS_qcom_cfg.ini) |
| * Set LI to MDTIM * AP_DTIM |
| * If Dtim = 2 and Mdtim = 2 then LI is 4 |
| * Else |
| * Set LI to maxModulatedDTIM * AP_DTIM |
| */ |
| beacon_interval_mod = iface->beaconInterval/100; |
| if (beacon_interval_mod == 0) |
| beacon_interval_mod = 1; |
| |
| max_mod_dtim = wma->staMaxLIModDtim |
| /(iface->dtimPeriod*beacon_interval_mod); |
| |
| if (max_mod_dtim <= 0) |
| max_mod_dtim = 1; |
| |
| if (max_mod_dtim >= wma->staModDtim) { |
| listen_interval = |
| (wma->staModDtim * iface->dtimPeriod); |
| } else { |
| listen_interval = |
| (max_mod_dtim * iface->dtimPeriod); |
| } |
| } else { |
| return; |
| } |
| |
| WMA_LOGD("Set Listen Interval vdevId %d Listen Intv %d", |
| vdev_id, listen_interval); |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_LISTEN_INTERVAL, |
| listen_interval); |
| if (ret) { |
| /* Even it fails continue Fw will take default LI */ |
| WMA_LOGE("Failed to Set Listen Interval vdevId %d", |
| vdev_id); |
| } |
| |
| if (qpower_config) { |
| WMA_LOGD("disable Qpower in suspend mode!"); |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, |
| vdev_id, |
| WMI_STA_PS_ENABLE_QPOWER, |
| 0); |
| if (ret) |
| WMA_LOGE("Failed to disable Qpower in suspend mode!"); |
| |
| } |
| |
| /* |
| * Set inactivity time to 50ms when DUT is in WoW mode. |
| * It will be recovered to the cfg value when DUT resumes. |
| * |
| * The value 50ms inherits from Pronto. Pronto has different |
| * inactivity for broadcast frames (worst case inactivity |
| * is 50ms). 200ms Inactivity timer is applicable only to |
| * unicast data traffic. |
| */ |
| WMA_LOGD("%s: Set inactivity_time to 50.", __func__); |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, vdev_id, |
| WMI_STA_PS_PARAM_INACTIVITY_TIME, 50); |
| if (ret) |
| WMA_LOGE("%s: Setting InActivity time Failed.", |
| __func__); |
| |
| WMA_LOGD("%s: Set the Tx Wake Threshold 0.", __func__); |
| ret = wmi_unified_set_sta_ps_param( |
| wma->wmi_handle, vdev_id, |
| WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD, |
| WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER); |
| if (ret) |
| WMA_LOGE("%s: Setting TxWake Threshold Failed.", |
| __func__); |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_DTIM_POLICY , |
| NORMAL_DTIM); |
| if (ret) { |
| /* Set it to Normal DTIM */ |
| WMA_LOGE("Failed to Set to Normal DTIM vdevId %d", |
| vdev_id); |
| } |
| iface->dtim_policy = NORMAL_DTIM; |
| WMA_LOGD("Set DTIM Policy to Normal Dtim vdevId %d", vdev_id); |
| } |
| } |
| |
| static void wma_set_suspend_dtim(tp_wma_handle wma) |
| { |
| u_int8_t i; |
| |
| if (NULL == wma) { |
| WMA_LOGE("%s: wma is NULL", __func__); |
| return; |
| } |
| |
| for (i = 0; i < wma->max_bssid; i++) { |
| if ((wma->interfaces[i].handle) && |
| (false == wma->interfaces[i].alt_modulated_dtim_enabled)) { |
| wma_set_vdev_suspend_dtim(wma, i); |
| } |
| } |
| } |
| |
| static void wma_set_vdev_resume_dtim(tp_wma_handle wma, v_U8_t vdev_id) |
| { |
| struct wma_txrx_node *iface = &wma->interfaces[vdev_id]; |
| enum powersave_qpower_mode qpower_config = wma_get_qpower_config(wma); |
| u_int32_t inactivity_time; |
| |
| if ((iface->type == WMI_VDEV_TYPE_STA) && |
| (iface->dtim_policy == NORMAL_DTIM)) { |
| int32_t ret; |
| tANI_U32 cfg_data_val = 0; |
| /* get mac to acess CFG data base */ |
| struct sAniSirGlobal *mac = |
| (struct sAniSirGlobal*)vos_get_context(VOS_MODULE_ID_PE, |
| wma->vos_context); |
| if (!mac) { |
| WMA_LOGE(FL("Failed to get mac context")); |
| return; |
| } |
| /* Set Listen Interval */ |
| if (wlan_cfgGetInt(mac, WNI_CFG_LISTEN_INTERVAL, |
| &cfg_data_val) != eSIR_SUCCESS) { |
| VOS_TRACE( VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get value for listen interval"); |
| cfg_data_val = POWERSAVE_DEFAULT_LISTEN_INTERVAL; |
| } |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_LISTEN_INTERVAL, |
| cfg_data_val); |
| if (ret) { |
| /* Even it fails continue Fw will take default LI */ |
| WMA_LOGE("Failed to Set Listen Interval vdevId %d", |
| vdev_id); |
| } |
| |
| WMA_LOGD("Set Listen Interval vdevId %d Listen Intv %d", |
| vdev_id, cfg_data_val); |
| |
| ret = wmi_unified_vdev_set_param_send(wma->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_DTIM_POLICY , |
| STICK_DTIM); |
| if (ret) { |
| /* Set it back to Stick DTIM */ |
| WMA_LOGE("Failed to Set to Stick DTIM vdevId %d", |
| vdev_id); |
| } |
| iface->dtim_policy = STICK_DTIM; |
| WMA_LOGD("Set DTIM Policy to Stick Dtim vdevId %d", vdev_id); |
| |
| if (qpower_config) { |
| WMA_LOGD("enable Qpower in resume mode!"); |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, |
| vdev_id, |
| WMI_STA_PS_ENABLE_QPOWER, |
| qpower_config); |
| if (ret) |
| WMA_LOGE("Failed to enable Qpower in resume mode!"); |
| } |
| |
| if (wlan_cfgGetInt(mac, WNI_CFG_PS_DATA_INACTIVITY_TIMEOUT, |
| &cfg_data_val ) != eSIR_SUCCESS) { |
| VOS_TRACE(VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get WNI_CFG_PS_DATA_INACTIVITY_TIMEOUT"); |
| cfg_data_val = POWERSAVE_DEFAULT_INACTIVITY_TIME; |
| } |
| |
| inactivity_time = (u_int32_t)cfg_data_val; |
| WMA_LOGD("%s: Setting InActivity time %d.", __func__, |
| inactivity_time); |
| ret = wmi_unified_set_sta_ps_param(wma->wmi_handle, vdev_id, |
| WMI_STA_PS_PARAM_INACTIVITY_TIME, |
| inactivity_time); |
| if (ret) |
| WMA_LOGE("%s: Setting InActivity time Failed.", |
| __func__); |
| |
| if (wlan_cfgGetInt(mac, WNI_CFG_MAX_PS_POLL, |
| &cfg_data_val ) != eSIR_SUCCESS) { |
| VOS_TRACE(VOS_MODULE_ID_WDA, VOS_TRACE_LEVEL_ERROR, |
| "Failed to get value for WNI_CFG_MAX_PS_POLL"); |
| cfg_data_val = 0; |
| } |
| |
| /* |
| * Recover the Tx Wake Threshold |
| * 1, do not recover the value, because driver sets |
| * WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER before suspend, |
| * 2, recover the value, because driver sets |
| * WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS before suspend, |
| * 3, recover the value WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS, |
| * which is defined by fw as default and driver does |
| * not set it when psSetting is eSIR_ADDON_DISABLE_UAPSD. |
| */ |
| if ((eSIR_ADDON_DISABLE_UAPSD == wma->psSetting) |
| || ((eSIR_ADDON_NOTHING == wma->psSetting) |
| && (!cfg_data_val))) { |
| WMA_LOGD("%s: Set the Tx Wake Threshold.", __func__); |
| ret = wmi_unified_set_sta_ps_param( |
| wma->wmi_handle, vdev_id, |
| WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD, |
| WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS); |
| if (ret) |
| WMA_LOGE("Setting TxWake Threshold vdevId %d", |
| vdev_id); |
| } |
| } |
| } |
| |
| static void wma_set_resume_dtim(tp_wma_handle wma) |
| { |
| u_int8_t i; |
| |
| if (NULL == wma) { |
| WMA_LOGE("%s: wma is NULL", __func__); |
| return; |
| } |
| |
| for (i = 0; i < wma->max_bssid; i++) { |
| if ((wma->interfaces[i].handle) && |
| (false == wma->interfaces[i].alt_modulated_dtim_enabled)) { |
| wma_set_vdev_resume_dtim(wma, i); |
| } |
| } |
| } |
| |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| void wma_process_roam_synch_complete(WMA_HANDLE handle, |
| tSirSmeRoamOffloadSynchCnf *synchcnf) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| wmi_roam_synch_complete_fixed_param* cmd; |
| wmi_buf_t wmi_buf; |
| u_int8_t *buf_ptr; |
| u_int16_t len; |
| v_BOOL_t roam_synch_in_progress; |
| len = sizeof(wmi_roam_synch_complete_fixed_param); |
| |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not issue roam synch cnf", |
| __func__); |
| return; |
| } |
| roam_synch_in_progress = |
| wma_handle->interfaces[synchcnf->sessionId].roam_synch_in_progress; |
| if (roam_synch_in_progress == VOS_FALSE) { |
| WMA_LOGE("%s: Dont send the roam synch complete since Roam Synch" |
| "Propagation is not in Progress", __func__); |
| return; |
| } else { |
| adf_os_spin_lock_bh(&wma_handle->roam_synch_lock); |
| wma_handle->interfaces[synchcnf->sessionId].roam_synch_in_progress = |
| VOS_FALSE; |
| adf_os_spin_unlock_bh(&wma_handle->roam_synch_lock); |
| } |
| wmi_buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!wmi_buf) { |
| WMA_LOGE("%s: wmi_buf_alloc failed", __func__); |
| return; |
| } |
| cmd = (wmi_roam_synch_complete_fixed_param *)wmi_buf_data(wmi_buf); |
| buf_ptr = (u_int8_t *) cmd; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_wmi_roam_synch_complete_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(wmi_roam_synch_complete_fixed_param)); |
| cmd->vdev_id = synchcnf->sessionId; |
| if (wmi_unified_cmd_send(wma_handle->wmi_handle, wmi_buf, len, |
| WMI_ROAM_SYNCH_COMPLETE)) { |
| WMA_LOGP("%s: failed to send roam synch confirmation", __func__); |
| wmi_buf_free(wmi_buf); |
| return; |
| } |
| |
| DPTRACE(adf_dp_trace_record_event(ADF_DP_TRACE_EVENT_RECORD, |
| synchcnf->sessionId, ADF_PROTO_TYPE_EVENT, ADF_ROAM_COMPLETE)); |
| |
| return; |
| } |
| void wma_process_roam_synch_fail(WMA_HANDLE handle, |
| tSirRoamOffloadSynchFail *synchfail) |
| { |
| tp_wma_handle wma_handle = (tp_wma_handle) handle; |
| if (!wma_handle || !wma_handle->wmi_handle) { |
| WMA_LOGE("%s: WMA is closed, can not clean-up roam synch", |
| __func__); |
| return; |
| } |
| /* Hand Off Failure could happen as an exception, when a roam synch |
| * indication is posted to Host, but a roam synch complete is not |
| * posted to the firmware.So, clear the roam synch in progress |
| * flag before disconnecting the session through this event.*/ |
| adf_os_spin_lock_bh(&wma_handle->roam_synch_lock); |
| wma_handle->interfaces[synchfail->sessionId].roam_synch_in_progress = |
| VOS_FALSE; |
| adf_os_spin_unlock_bh(&wma_handle->roam_synch_lock); |
| } |
| #endif |
| |
| #ifdef FEATURE_RUNTIME_PM |
| int wma_runtime_suspend_req(WMA_HANDLE handle) |
| { |
| vos_msg_t vosMessage; |
| VOS_STATUS vosStatus = VOS_STATUS_SUCCESS; |
| int ret = 0; |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| |
| vos_event_reset(&wma->runtime_suspend); |
| |
| vosMessage.bodyptr = NULL; |
| vosMessage.type = WDA_RUNTIME_PM_SUSPEND_IND; |
| vosStatus = vos_mq_post_message(VOS_MQ_ID_WDA, &vosMessage ); |
| |
| if (!VOS_IS_STATUS_SUCCESS(vosStatus)) { |
| ret = -EAGAIN; |
| return ret; |
| } |
| |
| if (vos_wait_single_event(&wma->runtime_suspend, |
| WMA_TGT_SUSPEND_COMPLETE_TIMEOUT) != |
| VOS_STATUS_SUCCESS) { |
| WMA_LOGE("Failed to get runtime suspend event"); |
| ret = -EAGAIN; |
| goto out; |
| } |
| |
| /* Check if suspend completed, if not return failure */ |
| if (!wma_get_wow_bus_suspend(wma)) { |
| WMA_LOGE("Runtime Suspend Failed: %d", |
| wma_get_wow_bus_suspend(wma)); |
| ret = -EAGAIN; |
| } |
| out: |
| if (ret) |
| wma_runtime_resume_req(wma); |
| |
| return ret; |
| } |
| |
| int wma_runtime_resume_req(WMA_HANDLE handle) |
| { |
| vos_msg_t vosMessage; |
| VOS_STATUS vosStatus = VOS_STATUS_SUCCESS; |
| int ret = 0; |
| tp_wma_handle wma = (tp_wma_handle) handle; |
| struct wma_runtime_pm_context *runtime_context = &wma->runtime_context; |
| |
| vos_runtime_pm_prevent_suspend(runtime_context->resume); |
| |
| vosMessage.bodyptr = NULL; |
| vosMessage.type = WDA_RUNTIME_PM_RESUME_IND; |
| vosStatus = vos_mq_post_message(VOS_MQ_ID_WDA, &vosMessage ); |
| |
| if (!VOS_IS_STATUS_SUCCESS(vosStatus)) { |
| WMA_LOGE("Failed to post Runtime PM Resume IND to VOS"); |
| ret = -EAGAIN; |
| vos_runtime_pm_allow_suspend(runtime_context->resume); |
| } |
| |
| return ret; |
| } |
| |
| #endif |
| |
| /** |
| * wma_get_interface_by_vdev_id() - lookup interface entry using vdev ID |
| * @vdev_id: vdev id |
| * |
| * Return: entry from vdev table |
| */ |
| struct wma_txrx_node *wma_get_interface_by_vdev_id(uint8_t vdev_id) |
| { |
| tp_wma_handle wma; |
| void *vos_ctx; |
| |
| vos_ctx = vos_get_global_context(VOS_MODULE_ID_WDA, NULL); |
| wma = vos_get_context(VOS_MODULE_ID_WDA, vos_ctx); |
| if (!wma) { |
| WMA_LOGE("%s: Invalid WMA handle", __func__); |
| return NULL; |
| } |
| |
| if (vdev_id >= wma->max_bssid) { |
| WMA_LOGE("%s: Invalid vdev_id %u", __func__, vdev_id); |
| return NULL; |
| } |
| |
| return &wma->interfaces[vdev_id]; |
| } |
| |
| /** |
| * wma_is_vdev_up() - return whether a vdev is up |
| * @vdev_id: vdev id |
| * |
| * Return: true if the vdev is up, false otherwise |
| */ |
| bool wma_is_vdev_up(uint8_t vdev_id) |
| { |
| struct wma_txrx_node *vdev = wma_get_interface_by_vdev_id(vdev_id); |
| if (vdev) |
| return vdev->vdev_up; |
| else |
| return false; |
| } |
| |
| /** |
| * wma_get_vht_ch_width - return vht channel width |
| * |
| * Return: return vht channel width |
| */ |
| uint32_t wma_get_vht_ch_width(void) |
| { |
| uint32_t fw_ch_wd = WNI_CFG_VHT_CHANNEL_WIDTH_80MHZ; |
| v_CONTEXT_t v_ctx = vos_get_global_context(VOS_MODULE_ID_VOSS, NULL); |
| tp_wma_handle wm_hdl = (tp_wma_handle)vos_get_context(VOS_MODULE_ID_WDA, |
| v_ctx); |
| if (NULL == wm_hdl) { |
| WMA_LOGE("%s: Failed to get wm_hdl", __func__); |
| return -EINVAL; |
| } |
| if (wm_hdl->vht_cap_info & IEEE80211_VHTCAP_SUP_CHAN_WIDTH_160) |
| fw_ch_wd = WNI_CFG_VHT_CHANNEL_WIDTH_160MHZ; |
| else if (wm_hdl->vht_cap_info & IEEE80211_VHTCAP_SUP_CHAN_WIDTH_80_160) |
| fw_ch_wd = WNI_CFG_VHT_CHANNEL_WIDTH_80_PLUS_80MHZ; |
| |
| return fw_ch_wd; |
| } |
| |
| /* |
| * wma_suspend_fw() - API to suspend FW |
| * |
| * The API will be called only for SDIO driver from HDD, for other drivers |
| * by default HIF return failure, FW suspend happens in bus suspend callbacks. |
| * |
| * Return : int |
| */ |
| |
| int wma_suspend_fw(void) |
| { |
| int ret = 0; |
| int is_wow_enabled; |
| |
| tp_wma_handle wma = vos_get_context(VOS_MODULE_ID_WDA, |
| vos_get_global_context(VOS_MODULE_ID_VOSS, NULL)); |
| |
| if (!wma) |
| return -EINVAL; |
| |
| if (wma_check_scan_in_progress(wma)) { |
| WMA_LOGE("%s: Scan in progress, Aborting suspend", __func__); |
| return -EBUSY; |
| } |
| |
| is_wow_enabled = wma_is_wow_mode_selected(wma); |
| if (is_wow_enabled) |
| ret = wma_enable_wow_in_fw(wma, 0); |
| else |
| ret = wma_suspend_target(wma, 0); |
| |
| if (ret) { |
| pr_err("%s: %s suspend failed\n", __func__, |
| is_wow_enabled ? "wow" : "pdev"); |
| return ret; |
| } |
| |
| pr_debug("%s: %s suspend successful\n", __func__, |
| is_wow_enabled ? "wow" : "pdev"); |
| |
| return ret; |
| } |
| |
| /* |
| * wma_resume_fw() - API to resume FW |
| * |
| * The API will be called only for SDIO driver from HDD, for other drivers |
| * by default HIF return failure, FW resume happens in bus resume callbacks. |
| * |
| * Return : int |
| */ |
| |
| |
| int wma_resume_fw(void) |
| { |
| int ret = 0; |
| int is_wow_enabled; |
| |
| tp_wma_handle wma = vos_get_context(VOS_MODULE_ID_WDA, |
| vos_get_global_context(VOS_MODULE_ID_VOSS, NULL)); |
| |
| if (!wma) |
| return -EINVAL; |
| |
| is_wow_enabled = wma_is_wow_mode_selected(wma); |
| if (is_wow_enabled) |
| ret = wma_disable_wow_in_fw(wma, 0); |
| else |
| ret = wma_resume_target(wma, 0); |
| |
| if (ret) { |
| pr_err("%s: %s resume failed\n", __func__, |
| is_wow_enabled ? "wow" : "pdev"); |
| return ret; |
| } |
| |
| pr_debug("%s: %s resume successful\n", __func__, |
| is_wow_enabled ? "wow" : "pdev"); |
| |
| return ret; |
| } |
| |
| |
| /** |
| * wma_btc_set_bt_wlan_interval() - send btc bt/wlan interval page to FW |
| * common function to send btc bt/wlan interval page (p2p/sta/sap) |
| * to the firmware |
| * @wma_handle: pointer to the WMA handle |
| * @interval: pointer to the WMI_COEX_CONFIG_CMD_fixed_param struct |
| * |
| * Return: 0 - success |
| */ |
| int wma_btc_set_bt_wlan_interval(tp_wma_handle wma_handle, |
| WMI_COEX_CONFIG_CMD_fixed_param *interval) |
| { |
| int32_t ret; |
| WMI_COEX_CONFIG_CMD_fixed_param *cmd; |
| uint8_t *buf_ptr; |
| uint32_t len; |
| wmi_buf_t buf; |
| |
| len = sizeof(*cmd); |
| buf = wmi_buf_alloc(wma_handle->wmi_handle, len); |
| if (!buf) { |
| WMA_LOGE(FL("wmi_buf_alloc failed")); |
| return -ENOMEM; |
| } |
| |
| buf_ptr = (uint8_t *)wmi_buf_data(buf); |
| cmd = (WMI_COEX_CONFIG_CMD_fixed_param *)buf_ptr; |
| WMITLV_SET_HDR(&cmd->tlv_header, |
| WMITLV_TAG_STRUC_WMI_COEX_CONFIG_CMD_fixed_param, |
| WMITLV_GET_STRUCT_TLVLEN(WMI_COEX_CONFIG_CMD_fixed_param)); |
| |
| cmd->vdev_id = interval->vdev_id; |
| |
| cmd->config_type= interval->config_type; |
| cmd->config_arg1 = interval->config_arg1; |
| cmd->config_arg2 = interval->config_arg2; |
| |
| ret = wmi_unified_cmd_send(wma_handle->wmi_handle, buf, len, |
| WMI_COEX_CONFIG_CMDID); |
| if (ret != EOK) { |
| WMA_LOGE(FL("Failed to set btc bt/wlan interval")); |
| wmi_buf_free(buf); |
| return -EIO; |
| } |
| WMA_LOGI("[BTC]: config_type = %d, config_arg1 = %d, config_arg2 = %d", |
| interval->config_type, |
| interval->config_arg1, |
| interval->config_arg2); |
| return 0; |
| } |
| |
| /** |
| * wma_set_tx_power_scale() - set tx power scale |
| * @vdev_id: vdev id |
| * @value: value |
| * |
| * Return: VOS_STATUS_SUCCESS for success or error code. |
| */ |
| VOS_STATUS wma_set_tx_power_scale(uint8_t vdev_id, int value) |
| { |
| void *vos_context = vos_get_global_context(VOS_MODULE_ID_WDA, NULL); |
| VOS_STATUS ret; |
| tp_wma_handle wma_handle = (tp_wma_handle) vos_get_context( |
| VOS_MODULE_ID_WDA, vos_context); |
| |
| if (NULL == wma_handle) { |
| WMA_LOGE("%s: wma_handle is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| if (!(wma_handle->interfaces[vdev_id].vdev_up)) { |
| WMA_LOGE("%s: vdev id %d is not up", __func__, vdev_id); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ret = wmi_unified_vdev_set_param_send(wma_handle->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_TXPOWER_SCALE, value); |
| if (ret != VOS_STATUS_SUCCESS) |
| WMA_LOGE("Set tx power value failed"); |
| |
| return ret; |
| } |
| |
| /** |
| * wma_set_tx_power_scale_decr_db() - decrease power by DB value |
| * @vdev_id: vdev id |
| * @value: value |
| * |
| * Return: CDF_STATUS_SUCCESS for success or error code. |
| */ |
| VOS_STATUS wma_set_tx_power_scale_decr_db(uint8_t vdev_id, int value) |
| { |
| void *vos_context = vos_get_global_context(VOS_MODULE_ID_WDA, NULL); |
| VOS_STATUS ret; |
| tp_wma_handle wma_handle = (tp_wma_handle) vos_get_context( |
| VOS_MODULE_ID_WDA, vos_context); |
| |
| if (NULL == wma_handle) { |
| WMA_LOGE("%s: wma_handle is NULL", __func__); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| if (!(wma_handle->interfaces[vdev_id].vdev_up)) { |
| WMA_LOGE("%s: vdev id %d is not up", __func__, vdev_id); |
| return VOS_STATUS_E_FAILURE; |
| } |
| |
| ret = wmi_unified_vdev_set_param_send(wma_handle->wmi_handle, vdev_id, |
| WMI_VDEV_PARAM_TXPOWER_SCALE_DECR_DB, value); |
| if (ret != VOS_STATUS_SUCCESS) |
| WMA_LOGE("Decrease tx power value failed"); |
| |
| return ret; |
| } |