Google Git
Sign in
coral / imx-board-wlan-src / 2b2b51c02f9e49eac402a680d475afbf104b33e8 / . / CORE / MAC / src / cfg / cfgUtil / cfg.txt
blob: 9171aac41fd8499ff2f38ba7afd6ff219b6e6ce7 [file] [log] [blame]
* Copyright (c) 2014 The Linux Foundation. All rights reserved.
*
* Previously licensed under the ISC license by Qualcomm Atheros, Inc.
*
*
* Permission to use, copy, modify, and/or distribute this software for
* any purpose with or without fee is hereby granted, provided that the
* above copyright notice and this permission notice appear in all
* copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
* This file was originally distributed by Qualcomm Atheros, Inc.
* under proprietary terms before Copyright ownership was assigned
* to the Linux Foundation.
*
* This is the data definition file for the CFG module.
* Author: Kevin Nguyen
* Date: 03/18/02
* History:-
* 03/18/02 Created.
* 08/10/05 ww: add maoe channels to have a complete channel listing: (see WNI_CFG_VALID_CHANNEL_LIST)
* 08/10/05 ww: WNI_CFG_SCAN_CONTROL_LIST has a new contents
* --------------------------------------------------------------------
**********************************************************************
*
* This file contains the descriptions of all configuration parameters
* for both STA and AP.
*
* OUTPUT:
* -------
* The output files are:
* wniCfgSta.h - C header file for STA mode only
* wniCfgAp.h - C header file for both STA and AP
* wniCfgSta.bin - Control and default values for STA system
* wniCfgAp.bin - Control and default values for AP system
*
* PARAMETER DESCRIPTION:
* ----------------------
* For each parameter, the description must be on separate lines and
* exactly as specified below. [] are comments and should not be included.
*
* [Common info] parameter_name type maxLen semIndx
* [STA flags] valid RW P/NP RESTART/RELOAD
* [STA_NTF] notification_mask
* [STA values] min max value [for integer]
* length byte1 byte2 ... [for string]
* [AP flags] valid RW/RO/WO P/NP RESTART/RELOAD
* [AP_NTF] notification_mask
* [AP values] min max value [for integer]
* length byte1 byte2 ... [for string]
*
* parameter_name:
* This will be used as the base name for C macro definition.
* Therefore, C syntax rule must be observed.
*
* type:
* Specifies parameter type
* S - variable-length string
* I - integer
*
* maxLen:
* Specifies maximum parameter length in bytes.
*
* semIndx:
* Specifies semaphore index to use for locking this parameter.
* More than one parameters (those belonging to the same group)
* can share the same semaphore index.
*
* valid:
* Specifies if this parameter will be valid in current mode.
* V - Valid
* NV - Not valid
*
* RW:
* Specifies Read/Write mode.
* RO - Read only
* RW - Read/Write
* WO - Write only
* XX - Not accessible from host
*
* P:
* Specifies persistent memory option
* P - Save to persistent memory
* NP - No save
*
* RELOAD:
* Specifies whether setting this requires reloading the MAC module
* This attribute can be changed only when SME is in OFFLINE or SUSPEND(OFFLINE) state
*
* RESTART:
* Specifies whether setting this requires (re)assoc at STA and restart at AP
* This attribute can be changed only when SME is in OFFLINE, SUSPEND(OFFLINE),
* IDLE or SUSPEND(IDLE) states
*
* STA_notification:
* Lists modules to be notified in STA mode. Valid modules are:
* HDD, LIM, SCH, ARQ, DPH, NIM, SP, RFP, RHP, TFP. More than one
* modules can be listed on the same line using space or tab as the
* separator. If no notification is required, 'NONE' must be specified.
*
* AP_notification:
* Lists module to be notified in AP mode. Valid modules are:
* HDD, LIM, SCH, ARQ, DPH, NIM, SP, RFP, RHP, TFP. More than one
* modules can be listed on the same line using space or tab as the
* separator. If no notification is required, 'NONE' must be specified.
*
* STA/AP integer values:
* min:
* Specifies minimum value for an integer parameter. This field is
* ignored if the parameter type is string. However, this field must
* not be omitted.
*
* max:
* Specifies maximum value for an integer parameter. This field is
* ignored if the parameter type is string. However, this field must
* not be omitted.
*
* default:
* Specifies default value for an integer parameter. This field is
* ignored if the parameter type is string. However, this field must
* not be omitted.
*
* STA/AP string values:
* len:
* The actual length of the string
*
* bytei:
* byte i of the string where i varies from 1 to len
*
* TABLE GENERATION:
* -----------------
* Table can be generated using keywords '#TABLE' and '#END' as below:
*
* #TABLE table_name number_of_row
* WNI_CFG_xxxx
* .......
* .......
* #END
*
* The CFG utility will generate the following output:
* WNI_CFG_table_xxx_ID xxx
* WNI_CFG_table_xxx_ROW number_of_rows
* WNI_CFG_table_xxx_COL number_of_columns
*
* These will be followed by the parameter definition for each entry in
* the table. Table is organized in column-major order.
*
* #ENTRY_VALUES 1
* 0 4 1
* 0 0 0
* #ENTRY_VALUES 2
* 0 4 2
* 0 0 0
* #ENTRY_VALUES 3
* 0 4 3
* 0 0 0
* #ENTRY_VALUES 4
* 0 4 4
* 0 0 0
*
*
* ENUMERATION
* -----------
* Enumerations can be define using keyword '#ENUM'
*
* #ENUM xxx val
*
* The cfg utility will generate the following output in the header file
* #define paramname_xxx val
*
*
* Station ID (changing requires restart)
*
WNI_CFG_STA_ID S 6 1
V RW NP RELOAD
HAL
6 0x22 0x22 0x44 0x44 0x33 0x33
V RW NP RELOAD
HAL
6 0x22 0x22 0x11 0x11 0x33 0x33
*
* CF Pollable
*
WNI_CFG_CF_POLLABLE I 4 1
NV RO NP RESTART
NONE
0 0 0
V RO NP RESTART
NONE
0 1 0
*
* CFP Period
*
WNI_CFG_CFP_PERIOD I 4 1
V RO NP
NONE
0 255 1
V RW NP
SCH
0 255 1
*
* CFP Max Duration
*
WNI_CFG_CFP_MAX_DURATION I 4 1
V RO NP
NONE
0 65535 30000
V RW NP
HAL
0 65535 30000
*
* SSID (changing requires restart)
*
WNI_CFG_SSID S 32 1
V RW NP RESTART
NONE
10 1 2 3 4 5 6 7 8 9 0
V RW NP RESTART
NONE
10 1 2 3 4 5 6 7 8 9 0
*
* Beacon Period
* Can't be changed on STA in infrastructure, ignore notification at SCH
*
WNI_CFG_BEACON_INTERVAL I 4 2
V RW NP
SCH
0 65535 100
V RW NP
SCH
0 65535 100
*
* DTIM Period
*
WNI_CFG_DTIM_PERIOD I 4 2
V RO NP
NONE
0 65535 1
V RW NP
SCH
0 65535 1
*
* WEP Key Length (5 or 13 bytes)
*
WNI_CFG_WEP_KEY_LENGTH I 4 5
V RW NP RESTART
NONE
5 13 5
V RW NP RESTART
NONE
5 13 5
#ENUM 5 5
#ENUM 13 13
*
* Default Key Table
*
#TABLE WNI_CFG_WEP_DEFAULT_KEY_TABLE 4
WNI_CFG_WEP_DEFAULT_KEY S 13 4
V WO NP RESTART
NONE
0
V WO NP RESTART
NONE
0
#END
*
* WEP Default Key id
*
WNI_CFG_WEP_DEFAULT_KEYID I 4 5
V RW NP
LIM
0 3 0
V RW NP
LIM
0 3 0
#ENUM 0 0
#ENUM 1 1
#ENUM 2 2
#ENUM 3 3
*
* Exclude unencrypted frames (WEP)
*
WNI_CFG_EXCLUDE_UNENCRYPTED I 4 5
V RW NP
LIM
0 1 0
V RW NP
LIM
0 1 0
*
* RTS Threshold
*
WNI_CFG_RTS_THRESHOLD I 4 6
V RW NP
HAL
0 1048576 2347
V RW NP
HAL
0 1048576 2347
*
* Short Retry Limit
*
WNI_CFG_SHORT_RETRY_LIMIT I 4 6
V RW NP
HAL
0 255 6
V RW NP
HAL
0 255 6
*
* Long Retry Limit
*
WNI_CFG_LONG_RETRY_LIMIT I 4 6
V RW NP
HAL
0 255 6
V RW NP
HAL
0 255 6
*
* Fragmentation Threshold
*
WNI_CFG_FRAGMENTATION_THRESHOLD I 4 6
V RW NP
HAL
256 8000 8000
V RW NP
HAL
256 8000 8000
*
* Minimum Channel Time (TU)
*
WNI_CFG_ACTIVE_MINIMUM_CHANNEL_TIME I 4 9
V RW NP
NONE
0 65535 20
V RW NP
NONE
0 65535 20
*
* Maximum Channel Time (TU)
*
WNI_CFG_ACTIVE_MAXIMUM_CHANNEL_TIME I 4 9
V RW NP
NONE
0 65535 40
V RW NP
NONE
0 65535 40
*
* Minimum Channel Time (TU)
*
WNI_CFG_PASSIVE_MINIMUM_CHANNEL_TIME I 4 9
V RW NP
NONE
0 65535 60
V RW NP
NONE
0 65535 60
*
* Maximum Channel Time (TU)
*
WNI_CFG_PASSIVE_MAXIMUM_CHANNEL_TIME I 4 9
V RW NP
NONE
0 65535 110
V RW NP
NONE
0 65535 110
*
* Join Failure Timeout (TU)
*
WNI_CFG_JOIN_FAILURE_TIMEOUT I 4 7
V RW NP
NONE
0 65535 3000
V RW NP
NONE
0 65535 3000
*
* Authenticate Failure Timeout (TU)
*
WNI_CFG_AUTHENTICATE_FAILURE_TIMEOUT I 4 7
V RW NP
NONE
0 65535 1000
V RW NP
NONE
0 65535 1000
*
* Authenticate Response Timeout (TU)
*
WNI_CFG_AUTHENTICATE_RSP_TIMEOUT I 4 7
V RW NP
NONE
0 65535 1000
V RW NP
NONE
0 65535 1000
*
* Assocation Failure Timeout (TU)
*
WNI_CFG_ASSOCIATION_FAILURE_TIMEOUT I 4 8
V RW NP
LIM
0 65535 2000
V RW NP
LIM
0 65535 3000
*
* Reassociation Failure Timeout (TU)
*
WNI_CFG_REASSOCIATION_FAILURE_TIMEOUT I 4 7
V RW NP
NONE
0 65535 1000
V RW NP
NONE
0 65535 3000
*
* RA periodicity Timeout (TU)
*
WNI_CFG_RA_PERIODICITY_TIMEOUT_IN_PS I 4 7
V RW NP
HAL
0 65535 1000
NV RW NP
NONE
0 0 0
*
* Beacon Filter Enable/Disable (TU)
*
WNI_CFG_PS_ENABLE_BCN_FILTER I 4 7
V RW NP
HAL
0 1 1
NV RW NP
NONE
0 1 1
*
* Heart Beat Enable/Disable (TU)
*
WNI_CFG_PS_ENABLE_HEART_BEAT I 4 7
V RW NP
HAL
0 1 1
NV RW NP
NONE
0 1 1
*
* RSSI Monitor Enable/Disable (TU)
*
WNI_CFG_PS_ENABLE_RSSI_MONITOR I 4 7
V RW NP
HAL
0 1 0
NV RW NP
NONE
0 1 0
*
* PS Data InActivity Timeout (TU)
*
WNI_CFG_PS_DATA_INACTIVITY_TIMEOUT I 4 7
V RW NP
HAL
1 255 20
NV RW NP
NONE
1 255 20
*
* RF Settling Time Clk (In US)
*
WNI_CFG_RF_SETTLING_TIME_CLK I 4 7
V RW NP
HAL
0 60000 1500
NV RW NP
NONE
0 60000 1500
*
* Supported Rate Set for 11b
*
WNI_CFG_SUPPORTED_RATES_11B S 4 2
V RO NP
NONE
4 2 4 11 22
V RO NP
NONE
4 2 4 11 22
*
* Supported Rate Set for 11a
*
WNI_CFG_SUPPORTED_RATES_11A S 8 7
V RO NP
NONE
8 12 18 24 36 48 72 96 108
V RO NP
NONE
8 12 18 24 36 48 72 96 108
*
* PHY Mode
*
WNI_CFG_PHY_MODE I 4 9
V RW NP RESTART
NONE
0 3 0
V RW NP RESTART
NONE
0 3 0
#ENUM 11A 0
#ENUM 11B 1
#ENUM 11G 2
#ENUM NONE 3
*
*The Dot11 mode can change dynamically on STA
*
WNI_CFG_DOT11_MODE I 4 9
V RW NP RESTART
LIM
0 11 0
V RW NP RESTART
LIM
0 11 0
#ENUM ALL 0
#ENUM 11A 1
#ENUM 11B 2
#ENUM 11G 3
#ENUM 11N 4
#ENUM 11G_ONLY 5
#ENUM 11N_ONLY 6
#ENUM 11AC 7
#ENUM 11AC_ONLY 8
*
* Operational Rate Set (goes in beacon, probe rsp and assoc req)
*
WNI_CFG_OPERATIONAL_RATE_SET S 12 2
V RW NP RESTART
NONE
0
V RW NP RESTART
NONE
4 0x82 0x84 11 22
* 8 0x8c 18 24 36 48 72 96 108
*
* Extended Operational Rate Set (goes in beacon, assoc req)
* required for 11g
*
WNI_CFG_EXTENDED_OPERATIONAL_RATE_SET S 8 7
V RW NP RESTART
NONE
0
V RW NP RESTART
NONE
0
*
* Proprietary Operational Rate Set
*
WNI_CFG_PROPRIETARY_OPERATIONAL_RATE_SET S 4 7
V RW NP RESTART
NONE
4 1 3 5 7
V RW NP RESTART
NONE
4 1 3 5 7
*
* BSSID
* In IBSS, this can be changed for coalescing, should SME go into IDLE state?
*
*
* Listen Interval
*
WNI_CFG_LISTEN_INTERVAL I 4 7
V RW NP RESTART
NONE
0 65535 1
V RO NP
NONE
0 65535 1
*
* Valid Channel List
*
WNI_CFG_VALID_CHANNEL_LIST S 100 8
V RW NP RESTART
LIM
55 36 40 44 48 52 56 60 64 1 6 11 34 38 42 46 2 3 4 5 7 8 9 10 12 13 14 100 104 108 112 116 120 124 128 132 136 140 149 151 153 155 157 159 161 50 54 58 62 240 242 244 246 248 250 252
V RW NP RESTART
LIM
55 36 40 44 48 52 56 60 64 1 6 11 34 38 42 46 2 3 4 5 7 8 9 10 12 13 14 100 104 108 112 116 120 124 128 132 136 140 149 151 153 155 157 159 161 50 54 58 62 240 242 244 246 248 250 252
*
* Current Channel
*
WNI_CFG_CURRENT_CHANNEL I 4 9
V RO NP
NONE
0 165 1
V RO NP
NONE
0 165 1
*
* For 11a or pure 11g, use 6Mbps(rateindex 11)
* as the default beaconRateIndex and
* nonBeaconRateIndex.
*
WNI_CFG_DEFAULT_RATE_INDEX_5GHZ I 4 9
V RW NP
NONE
0 11 5
V RW NP
NONE
0 11 5
*
* For 11b/g, use 1Mbps
* as the default beaconRateIndex and
* nonBeaconRateIndex.
*
WNI_CFG_DEFAULT_RATE_INDEX_24GHZ I 4 9
V RW NP
NONE
0 31 1
V RW NP
NONE
0 31 1
* *********************************************************
*
* Rate adaptation type
*
WNI_CFG_RATE_ADAPTATION_TYPE I 4 0
V RW NP
SCH
0 2 1
V RW NP
SCH
0 2 1
#ENUM FIXED 0
#ENUM AUTO 1
#ENUM SNR_BASED 2
*
* Rate adaptation fixed rate
* Used to determine the rate for all peer stations
*
*
WNI_CFG_FIXED_RATE I 4 0
V RW NP
HAL
0 44 0
V RW NP
HAL
0 44 0
#ENUM AUTO 0
#ENUM 1MBPS 1
#ENUM 2MBPS 2
#ENUM 5_5MBPS 3
#ENUM 11MBPS 4
#ENUM 6MBPS 5
#ENUM 9MBPS 6
#ENUM 12MBPS 7
#ENUM 18MBPS 8
#ENUM 24MBPS 9
#ENUM 36MBPS 10
#ENUM 48MBPS 11
#ENUM 54MBPS 12
#ENUM 6_5MBPS_MCS0_20MHZ_SIMO 13
#ENUM 13MBPS_MCS1_20MHZ_SIMO 14
#ENUM 19_5MBPS_MCS2_20MHZ_SIMO 15
#ENUM 26MBPS_MCS3_20MHZ_SIMO 16
#ENUM 39MBPS_MCS4_20MHZ_SIMO 17
#ENUM 52MBPS_MCS5_20MHZ_SIMO 18
#ENUM 58_5MBPS_MCS6_20MHZ_SIMO 19
#ENUM 65MBPS_MCS7_20MHZ_SIMO 20
#ENUM 7_2MBPS_MCS0_20MHZ_SIMO_SGI 21
#ENUM 14_4MBPS_MCS1_20MHZ_SIMO_SGI 22
#ENUM 21_7MBPS_MCS2_20MHZ_SIMO_SGI 23
#ENUM 28_9MBPS_MCS3_20MHZ_SIMO_SGI 24
#ENUM 43_3MBPS_MCS4_20MHZ_SIMO_SGI 25
#ENUM 57_8MBPS_MCS5_20MHZ_SIMO_SGI 26
#ENUM 65MBPS_MCS6_20MHZ_SIMO_SGI 27
#ENUM 72_2MBPS_MCS7_20MHZ_SIMO_SGI 28
#ENUM 0_25MBPS_SLR_20MHZ_SIMO 29
#ENUM 0_5MBPS_SLR_20MHZ_SIMO 30
#ENUM 68_25MBPS_QC_PROP_20MHZ_SIMO 31
#ENUM 54MBPS_MCS3_40MHZ_SIMO 32
#ENUM 81MBPS_MCS4_40MHZ_SIMO 33
#ENUM 108MBPS_MCS5_40MHZ_SIMO 34
#ENUM 121_5MBPS_MCS6_40MHZ_SIMO 35
#ENUM 135MBPS_MCS7_40MHZ_SIMO 36
#ENUM 15MBPS_MCS0_40MHZ_SIMO_SGI 37
#ENUM 30MBPS_MCS1_40MHZ_SIMO_SGI 38
#ENUM 45MBPS_MCS2_40MHZ_SIMO_SGI 39
#ENUM 60MBPS_MCS3_40MHZ_SIMO_SGI 40
#ENUM 90MBPS_MCS4_40MHZ_SIMO_SGI 41
#ENUM 120MBPS_MCS5_40MHZ_SIMO_SGI 42
#ENUM 135MBPS_MCS6_40MHZ_SIMO_SGI 43
#ENUM 150MBPS_MCS7_40MHZ_SIMO_SGI 44
* *********************************************************
*
* Broadcast/mutlicast rates for 2.4GHZ
* uses the same rate indices definition as WNI_CFG_FIXED_RATE
* default value corresponds to 1M
WNI_CFG_FIXED_RATE_MULTICAST_24GHZ I 4 8
V RW NP
HAL
0 31 1
V RW NP
HAL
0 31 1
* *********************************************************
*
* Broadcast/mutlicast rates for 5 GHZ
* uses the same rate indices definition as WNI_CFG_FIXED_RATE
* default value corresponds to 6M
WNI_CFG_FIXED_RATE_MULTICAST_5GHZ I 4 8
V RW NP
HAL
0 31 5
V RW NP
HAL
0 31 5
*
* retry rate selection policy
* 0 => use the minimum supported rate
* 1 => use the same rate as the chosen primary rate
* 2 => use the rate specified in RETRYRATE_SECONDARY
* 3 => use the rate closest to the primary
* 4 => autoselect the retry rate based on RA algorithm
*
WNI_CFG_RETRYRATE_POLICY I 4 0
V RW NP
HAL
0 255 4
V RW NP
HAL
0 255 4
#ENUM MIN_SUPPORTED 0
#ENUM PRIMARY 1
#ENUM RESERVED 2
#ENUM CLOSEST 3
#ENUM AUTOSELECT 4
#ENUM MAX 5
*
* the following two CFG's are
* used only if the retryrate policy == 2
* These should be set to one of the values used
* for configuring fixed rates (see enumerated rates)
*
WNI_CFG_RETRYRATE_SECONDARY I 4 0
V RW NP
HAL
0 255 0
V RW NP
HAL
0 255 0
WNI_CFG_RETRYRATE_TERTIARY I 4 0
V RW NP
HAL
0 255 0
V RW NP
HAL
0 255 0
* *********************************************************
*
* Automatic Power Save Delivery capability
*
WNI_CFG_APSD_ENABLED I 4 0
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
*
* Shared key authentication supported
*
WNI_CFG_SHARED_KEY_AUTH_ENABLE I 4 8
V RW NP
NONE
0 1 1
V RW NP
NONE
0 1 1
*
* Open system authentication supported
*
WNI_CFG_OPEN_SYSTEM_AUTH_ENABLE I 4 8
V RW NP
NONE
0 1 1
V RW NP
NONE
0 1 1
*
* Authentication Type (change requires restart)
*
WNI_CFG_AUTHENTICATION_TYPE I 4 8
V RW NP RESTART
NONE
0 65535 0
V RW NP RESTART
NONE
0 65535 0
*
* CF Poll Request (change requires restart)
*
WNI_CFG_CF_POLL_REQUEST I 4 8
NV RW NP RESTART
NONE
0 1 0
V RW NP RESTART
NONE
0 1 0
*
* Privacy Enabled (change requires restart)
*
WNI_CFG_PRIVACY_ENABLED I 4 8
V RW NP RESTART
NONE
0 1 0
V RW NP RESTART
NONE
0 1 0
*
* Short Preamble (change requires restart)
*
WNI_CFG_SHORT_PREAMBLE I 4 8
V RW NP RESTART
NONE
0 1 1
V RW NP RESTART
NONE
0 1 1
*
* Short Slot time
* This is the operational state of the BSS
WNI_CFG_SHORT_SLOT_TIME I 4 8
V RW NP
NONE
0 1 1
V RW NP
NONE
0 1 0
*
* ACCEPT Short Slot Association only
*
* 1: If AP supports shortSlot, then AP will accept
* association only from stations that supports
* supports short slot
* 0: AP supports shortSlot, but AP will accept association
* from stations regardless of whether station supports
* short slot or long slot
*
WNI_CFG_ACCEPT_SHORT_SLOT_ASSOC_ONLY I 4 9
V RW NP RESTART
NONE
0 1 0
V RW NP RESTART
NONE
0 1 0
*
* QOS Enabled (change requires restart)
*
WNI_CFG_QOS_ENABLED I 4 8
V RW NP RESTART
NONE
0 1 0
V RW NP RESTART
NONE
0 1 0
*
* HCF Enabled (change requires restart)
*
WNI_CFG_HCF_ENABLED I 4 8
V RW NP RESTART
NONE
0 1 0
V RW NP RESTART
NONE
0 1 0
*
* RSN (11i/WPA) Enabled
*
WNI_CFG_RSN_ENABLED I 4 8
V RW NP RESTART
NONE
0 1 0
V RW NP RESTART
NONE
0 1 0
*
* Background scanning periodicity (kilo usec)
*
WNI_CFG_BACKGROUND_SCAN_PERIOD I 4 8
V RW NP
LIM
0 180000 5000
V RW NP
LIM
0 18000 5000
*
* Max number of Preauthentication
*
WNI_CFG_MAX_NUM_PRE_AUTH I 4 8
V RW NP RESTART
NONE
0 256 64
V RW NP RESTART
NONE
0 256 64
*
* Preauthentication Cleanup Timeout (kilo usec)
*
WNI_CFG_PREAUTH_CLNUP_TIMEOUT I 4 8
NV XX NP
NONE
0 0 0
V RW NP
LIM
0 120000 30000
*
* Release AID Timeout
*
WNI_CFG_RELEASE_AID_TIMEOUT I 4 8
NV XX NP
NONE
0 0 0
V RW NP
LIM
0 100000 1000
*
* Heartbeat Threshold
*
WNI_CFG_HEART_BEAT_THRESHOLD I 4 8
V RW NP
LIM
0 65535 40
NV RW NP
NONE
0 65535 40
*
* Probe response wait time out after heartbeat failure
*
WNI_CFG_PROBE_AFTER_HB_FAIL_TIMEOUT I 4 8
V RW NP
NONE
10 10000 40
V RW NP
NONE
10 10000 40
*
* Manufacturer OUI (from eeprom)
*
WNI_CFG_MANUFACTURER_OUI S 3 8
V RO NP
NONE
3 0x0 0xa 0xf5
V RO NP
NONE
3 0x0 0xa 0xf5
*
* Manufacture Name (from eeprom)
*
WNI_CFG_MANUFACTURER_NAME S 64 8
V RO NP
NONE
8 0x51 0x75 0x61 0x6c 0x63 0x6f 0x6D 0x6D
V RO NP
NONE
8 0x51 0x75 0x61 0x6c 0x63 0x6f 0x6D 0x6D
*
* Model Number (from eeprom)
*
WNI_CFG_MODEL_NUMBER S 32 8
V RO NP
NONE
6 0x4d 0x4e 0x31 0x32 0x33 0x34
V RO NP
NONE
6 0x4d 0x4e 0x31 0x32 0x33 0x34
*
* Model Name (from eeprom)
* WFR4031
*
WNI_CFG_MODEL_NAME S 32 8
V RO NP
NONE
7 0x57 0x46 0x52 0x34 0x30 0x33 0x31
V RO NP
NONE
7 0x57 0x46 0x52 0x34 0x30 0x33 0x31
*
* Manufacture Product Name (from eeprom)
*
WNI_CFG_MANUFACTURER_PRODUCT_NAME S 32 8
V RO NP
NONE
6 0x31 0x31 0x6e 0x2D 0x41 0x50
V RO NP
NONE
6 0x31 0x31 0x6e 0x2D 0x41 0x50
*
* Manufacture Product Version (from eeprom)
*
WNI_CFG_MANUFACTURER_PRODUCT_VERSION S 32 8
V RO NP
NONE
6 0x53 0x4e 0x31 0x32 0x33 0x34
V RO NP
NONE
6 0x53 0x4e 0x31 0x32 0x33 0x34
*
* Multi Domain Capability (11d) Enable
*
WNI_CFG_11D_ENABLED I 4 9
V RW NP RESTART
NONE
0 1 1
V RW NP RESTART
NONE
0 1 0
*
* per channel Max power transmit (in dBm)
* this parameter correspond to the MAX_COUNTRY_EID
* table of (Channel Number/num channel/max tx power)
*
* There is one table for 5GHz channels and one table for 2.4GHz channels
*
WNI_CFG_MAX_TX_POWER_2_4 S 128 8
V RW NP
NONE
3 1 14 20
V RW NP
NONE
3 1 14 20
WNI_CFG_MAX_TX_POWER_5 S 128 8
V RW NP
NONE
3 36 126 20
V RW NP
NONE
3 36 126 20
*
* Cell size configurations. These are canned configurations for a specified
* cell size.
*
WNI_CFG_NETWORK_DENSITY I 4 9
V RW NP
HAL
0 3 3
V RW NP
HAL
0 3 0
#ENUM LOW 0
#ENUM MEDIUM 1
#ENUM HIGH 2
#ENUM ADAPTIVE 3
*
* Adaptive Threshold Algorithm
*
WNI_CFG_ADAPTIVE_THRESHOLD_ALGORITHM I 4 9
V RW NP
HAL
1 2 2
V RW NP
HAL
1 2 2
#ENUM CARRIER 1
#ENUM CORRELATION 2
*
* Current TX Antenna
*
WNI_CFG_CURRENT_TX_ANTENNA I 4 9
V RW NP
HAL
1 1 1
V RW NP
HAL
1 2 2
*
* Current RX Antenna
*
WNI_CFG_CURRENT_RX_ANTENNA I 4 9
V RW NP
HAL
1 2 2
V RW NP
HAL
1 3 3
*
* Current TX Power Level
*
WNI_CFG_CURRENT_TX_POWER_LEVEL I 4 9
V RW NP
NONE
0 128 27
V RW NP
NONE
0 128 27
*
* Parameter to indicate or not new BSS found
*
WNI_CFG_NEW_BSS_FOUND_IND I 4 9
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
*
* Qualcomm Prop Rates are disabled by default
*
WNI_CFG_PROPRIETARY_RATES_ENABLED I 4 12
V RW NP RESTART
NONE
0 1 0
V RW NP RESTART
NONE
0 1 0
*
* AP node Name
*
WNI_CFG_AP_NODE_NAME S 32 8
NV RO NP
NONE
0
V RW NP RESTART
NONE
0
*
* Country code (from EEPROM)
*
WNI_CFG_COUNTRY_CODE S 3 8
V RW NP
NONE
0
V RW NP
NONE
3 0x11 0x22 0x33
*
* Spectrum Management (11h) enable/disable
*
WNI_CFG_11H_ENABLED I 4 12
V RW NP RESTART
NONE
0 1 1
V RW NP RESTART
NONE
0 1 1
*
* Wait for CNF Timeout. CNF include (RE)ASSOC, DISASSOC, AUTH, DEAUTH,
* DUMMY packet
*
WNI_CFG_WT_CNF_TIMEOUT I 4 12
V RW NP
NONE
10 3000 1000
V RW NP
NONE
10 3000 1000
*
* Keepalive Timeout. A Null data frame is sent out every timeout.
* Applicable to both AP and STA
*
WNI_CFG_KEEPALIVE_TIMEOUT I 4 12
V RW NP
NONE
0 3600000 0
V RW NP
NONE
0 3600000 3000
*
* Proximity, set it for very short distances
* Proxmity setting is applied via halPhySetNwDensity()
*
* close proximity off = densityOn is true. network density config applies.
* close proximity on = densityOn is false. Don't care about network density config.
*
WNI_CFG_PROXIMITY I 4 12
V RW NP
HAL
0 1 0
V RW NP
HAL
0 1 0
#ENUM OFF 0
#ENUM ON 1
*
* Default LOG level
*
WNI_CFG_LOG_LEVEL I 4 12
V RW NP
NONE
0 7 4
V RW NP
NONE
0 7 4
*
* OLBC detection timeout
*
WNI_CFG_OLBC_DETECT_TIMEOUT I 4 12
V RW NP
NONE
1000 30000 10000
V RW NP
NONE
1000 30000 10000
**********************************
* Protection Enable
*
*LOWER byte for associated stations
*UPPER byte for overlapping stations.
*11g ==> protection from 11g
*11b ==> protection from 11b
*each byte will have the following info
*bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
*reserved reserved RIFS Lsig n-GF ht20 11g 11b
**********************************
WNI_CFG_PROTECTION_ENABLED I 4 9
V RW NP RESTART
LIM
0 0xffff 0xffff
V RW NP RESTART
LIM
0 0xffff 0xffff
#ENUM FROM_llA 0
#ENUM FROM_llB 1
#ENUM FROM_llG 2
#ENUM HT_20 3
#ENUM NON_GF 4
#ENUM LSIG_TXOP 5
#ENUM RIFS 6
#ENUM OBSS 7
#ENUM OLBC_FROM_llA 8
#ENUM OLBC_FROM_llB 9
#ENUM OLBC_FROM_llG 10
#ENUM OLBC_HT20 11
#ENUM OLBC_NON_GF 12
#ENUM OLBC_LSIG_TXOP 13
#ENUM OLBC_RIFS 14
#ENUM OLBC_OBSS 15
* ****************************************
*
* 11G Protection Enable Always
* Valid only if protection is enabled
* forces uses of protection regardless of legacy stations
*
WNI_CFG_11G_PROTECTION_ALWAYS I 4 9
V RW NP RESTART
NONE
0 1 0
V RW NP RESTART
NONE
0 1 0
*********************************************
* Force protection
* 0 : disable protection
* 1 : CTS
* 2 : RTS by threshold (threshold nonzero)
* 3 : dual CTS (not supported right now)
* 4 : RTS (threshold 0)
* 5 : auto
WNI_CFG_FORCE_POLICY_PROTECTION I 4 9
V RW NP RESTART
HAL
0 5 5
V RW NP RESTART
HAL
0 5 5
#ENUM DISABLE 0
#ENUM CTS 1
#ENUM RTS 2
#ENUM DUAL_CTS 3
#ENUM RTS_ALWAYS 4
#ENUM AUTO 5
********************************************
* 11G Short Preamble Enable
*
WNI_CFG_11G_SHORT_PREAMBLE_ENABLED I 4 9
V RW NP RESTART
NONE
0 1 0
V RW NP RESTART
NONE
0 1 0
*
* 11G Short Slot Time Enable (change requires restart)
* This is the admin state of short slot support.
WNI_CFG_11G_SHORT_SLOT_TIME_ENABLED I 4 9
V RW NP RESTART
NONE
0 1 1
V RW NP RESTART
NONE
0 1 1
*
* Parameter to allow 11g only STAs while operating in 11g mode
*
WNI_CFG_11G_ONLY_POLICY I 4 12
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
*
* Packet Classification
* This flag is a bitmask used to indicate which
* frame classifier to be enabled:
* b0: DSCP
* b1: 802.1P
*
WNI_CFG_PACKET_CLASSIFICATION I 4 12
V RW NP
HAL
0 3 0
V RW NP
HAL
0 3 0
#ENUM DISABLED 0
#ENUM DSCP 1
#ENUM 8021P 2
#ENUM ALL 3
*
* WME Enabled (change requires restart)
*
WNI_CFG_WME_ENABLED I 4 8
V RW NP RESTART
NONE
0 1 1
V RW NP RESTART
NONE
0 1 1
*
* ADDTS response timeout (in ms)
*
WNI_CFG_ADDTS_RSP_TIMEOUT I 4 8
V RW NP
NONE
0 65535 1000
V RW NP
NONE
0 65535 1000
* Max SP Length indicates the max number of
* total buffered MSDUs and MMPDUs the WMM AP
* may deliver to WMM STA during any service period
* triggered by WMM STA.
* 1) If AP sends WMM IE with the UAPSD bit 0, max_sp_length=0
* 2) If WMM STA's all 4 UAPSD flag are set to 0, max_sp_length=0
* 3) If AP sends WMM IE with UAPSD=1, and at least one of stations
* UAPSD flag is set to 1, then max_sp_length can be set to:
* [b5:b6]=0x00: WMM AP may deliver all buffered frames
* [b5:b6]=0x10: WMM AP may deliver max 2 buffered frames
* [b5:b6]=0x01: WMM AP may deliver max 4 buffered frames
* [b5:b6]=0x11: WMM AP may deliver max 6 buffered frames
WNI_CFG_MAX_SP_LENGTH I 4 8
V RW NP
NONE
0 3 0
V RW NP
NONE
0 3 0
*
* KEEP ALIVE STA Limit Threshold , used in AP to delete the STA
* from Station Table which didn't respond to Probe Response Messages
*
WNI_CFG_KEEP_ALIVE_STA_LIMIT_THRESHOLD I 4 8
NV RW NP
NONE
0 32 0
V RW NP
NONE
0 32 0
*
* Parameter that specifies whether to send SSID
* in Probe Response when SSID is suppressed
*
WNI_CFG_SEND_SINGLE_SSID_ALWAYS I 4 12
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
*
* WSM Enabled (change requires restart)
* Takes effect only if WME is also enabled
*
WNI_CFG_WSM_ENABLED I 4 8
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
* ****************************************
*
* Background Channel List
* Contains pairs of {channelNumber, scanType}
* where scanType = 0 indicates active scan and
* = 1 indicates passive scan
*
*
*WNI_CFG_BACKGROUND_SCAN_LIST S 128 8
*V RW NP RESTART
*LIM
*60 36 0 40 0 44 0 48 0 52 0 56 0 60 0 64 0 1 0 6 0 11 0 34 0 38 0 42 0 46 0 2 0 3 0 4 0 5 0 7 0 8 0 9 0 10 0 12 0 13 0 14 0 149 0 153 0 157 0 161 0
*V RW NP RESTART
*LIM
*60 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 10 0 11 0 12 0 13 0 14 0 34 0 36 0 38 0 40 0 42 0 44 0 46 0 48 0 52 0 56 0 60 0 64 0 149 0 153 0 157 0 161 0
*
* ****************************************
* EDCA paramters are contained in profiles - each profile contains
* the parameters [ACM, AIFSN, CWmin, CWmax, TxOp] for four
* access categories (i.e., four sets). Two such sets of four parameters
* make a single profile: One set is used locally by the AP, the other set
* is broadcast for use by stations.
*
* Cwmin and Cwmax are two bytes each, MSB first. So Cwmin of [3 255] is
* equivalent to 0x3ff, i.e. 3*256+255=1023
*
* The profile to use is selected based on the valus of the profile select param
* See ENUMs below for definitions of profile values
*
WNI_CFG_EDCA_PROFILE I 4 8
V RW NP
SCH
0 255 1
V RW NP
SCH
0 255 1
#ENUM ANI 0
#ENUM WMM 1
#ENUM TIT_DEMO 2
#ENUM MAX 3
#ENUM ACM_IDX 0
#ENUM AIFSN_IDX 1
#ENUM CWMINA_IDX 2
#ENUM CWMAXA_IDX 4
#ENUM TXOPA_IDX 6
#ENUM CWMINB_IDX 7
#ENUM CWMAXB_IDX 9
#ENUM TXOPB_IDX 11
#ENUM CWMING_IDX 12
#ENUM CWMAXG_IDX 14
#ENUM TXOPG_IDX 16
* ****************************************
* Profile 0 (Airgo) parameters - AC_BK Local
* ACM, AIFSN, [CWminH, CWminL, CWmaxH, CWmaxL, TxOp]-11A/11B/11G
*
WNI_CFG_EDCA_ANI_ACBK_LOCAL S 20 8
V RW NP RESTART
NONE
17 0 7 0 15 3 255 0 0 31 3 255 0 0 15 3 255 0
V RW NP RESTART
NONE
17 0 7 0 15 3 255 0 0 31 3 255 0 0 15 3 255 0
*
* Profile 0 (Airgo) parameters AC_BE Local
* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
*
WNI_CFG_EDCA_ANI_ACBE_LOCAL S 20 8
V RW NP RESTART
NONE
17 0 2 0 15 3 255 100 0 31 3 255 100 0 15 3 255 100
V RW NP RESTART
NONE
17 0 2 0 15 3 255 100 0 31 3 255 100 0 15 3 255 100
*
* Profile 0 (Airgo) parameters AC_VI Local
* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
*
WNI_CFG_EDCA_ANI_ACVI_LOCAL S 20 8
V RW NP RESTART
NONE
17 0 2 0 7 0 15 200 0 15 0 31 188 0 7 0 15 200
V RW NP RESTART
NONE
17 0 2 0 7 0 15 200 0 15 0 31 188 0 7 0 15 200
*
* Profile 0 (Airgo) parameters AC_VO Local
* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
*
WNI_CFG_EDCA_ANI_ACVO_LOCAL S 20 8
V RW NP RESTART
NONE
17 0 2 0 3 0 7 100 0 7 0 15 102 0 3 0 7 100
V RW NP RESTART
NONE
17 0 2 0 3 0 7 100 0 7 0 15 102 0 3 0 7 100
*
* Profile 0 (Airgo) parameters - AC_BK Broadcast
* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
*
WNI_CFG_EDCA_ANI_ACBK S 20 8
V RW NP RESTART
NONE
17 0 7 0 15 3 255 0 0 31 3 255 0 0 15 3 255 0
V RW NP RESTART
NONE
17 0 7 0 15 3 255 0 0 31 3 255 0 0 15 3 255 0
*
* Profile 0 (Airgo) parameters AC_BE Broadcast
* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
*
WNI_CFG_EDCA_ANI_ACBE S 20 8
V RW NP RESTART
NONE
17 0 2 0 15 3 255 100 0 31 3 255 100 0 15 3 255 100
V RW NP RESTART
NONE
17 0 2 0 15 3 255 100 0 31 3 255 100 0 15 3 255 100
*
* Profile 0 (Airgo) parameters AC_VI Broadcast
* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
*
WNI_CFG_EDCA_ANI_ACVI S 20 8
V RW NP RESTART
NONE
17 0 2 0 7 0 15 200 0 15 0 31 188 0 7 0 15 200
V RW NP RESTART
NONE
17 0 2 0 7 0 15 200 0 15 0 31 188 0 7 0 15 200
*
* Profile 0 (Airgo) parameters AC_VO Broadcast
* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
*
WNI_CFG_EDCA_ANI_ACVO S 20 8
V RW NP RESTART
NONE
17 0 2 0 3 0 7 100 0 7 0 15 102 0 3 0 7 100
V RW NP RESTART
NONE
17 0 2 0 3 0 7 100 0 7 0 15 102 0 3 0 7 100
* ****************************************
* Profile 1 (WME) parameters - AC_BK Local
* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
*
WNI_CFG_EDCA_WME_ACBK_LOCAL S 20 8
V RW NP RESTART
NONE
17 0 7 0 15 3 255 0 0 31 3 255 0 0 15 3 255 0
V RW NP RESTART
NONE
17 0 7 0 15 3 255 0 0 15 3 255 0 0 15 3 255 0
*
* Profile 1 (WME) parameters AC_BE Local
* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
*
WNI_CFG_EDCA_WME_ACBE_LOCAL S 20 8
V RW NP RESTART
NONE
17 0 3 0 15 0 63 0 0 31 3 255 0 0 15 0 63 0
V RW NP RESTART
NONE
17 0 3 0 15 0 63 0 0 15 0 63 0 0 15 0 63 0
*
* Profile 1 (WME) parameters AC_VI Local
* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
*
WNI_CFG_EDCA_WME_ACVI_LOCAL S 20 8
V RW NP RESTART
NONE
17 0 1 0 7 0 15 94 0 7 0 15 188 0 7 0 15 94
V RW NP RESTART
NONE
17 0 1 0 7 0 15 94 0 7 0 15 188 0 7 0 15 94
*
* Profile 1 (WME) parameters AC_VO Local
* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
*
WNI_CFG_EDCA_WME_ACVO_LOCAL S 20 8
V RW NP RESTART
NONE
17 0 1 0 3 0 7 47 0 3 0 7 102 0 3 0 7 47
V RW NP RESTART
NONE
17 0 1 0 3 0 7 47 0 3 0 7 102 0 3 0 7 47
*
* Profile 1 (WME) parameters - AC_BK Broadcast
* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
*
WNI_CFG_EDCA_WME_ACBK S 20 8
V RW NP RESTART
NONE
17 0 7 0 15 3 255 0 0 15 3 255 0 0 15 3 255 0
V RW NP RESTART
NONE
17 0 7 0 15 3 255 0 0 15 3 255 0 0 15 3 255 0
*
* Profile 1 (WME) parameters AC_BE Broadcast
* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
*
WNI_CFG_EDCA_WME_ACBE S 20 8
V RW NP RESTART
NONE
17 0 3 0 15 3 255 0 0 15 3 255 0 0 15 3 255 0
V RW NP RESTART
NONE
17 0 3 0 15 3 255 0 0 15 3 255 0 0 15 3 255 0
*
* Profile 1 (WME) parameters AC_VI Broadcast
* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
*
WNI_CFG_EDCA_WME_ACVI S 20 8
V RW NP RESTART
NONE
17 0 2 0 7 0 15 94 0 7 0 15 188 0 7 0 15 94
V RW NP RESTART
NONE
17 0 2 0 7 0 15 94 0 7 0 15 188 0 7 0 15 94
*
* Profile 1 (WME) parameters AC_VO Broadcast
* ACM, AIFSN, [CWmin, CWmax, TxOp]-11A/11B/11G
*
WNI_CFG_EDCA_WME_ACVO S 20 8
V RW NP RESTART
NONE
17 0 2 0 3 0 7 47 0 3 0 7 102 0 3 0 7 47
V RW NP RESTART
NONE
17 0 2 0 3 0 7 47 0 3 0 7 102 0 3 0 7 47
*
* Radar detector flag enable/disable
*
WNI_CFG_RDET_FLAG I 4 9
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
#ENUM ENABLE 1
#ENUM DISABLE 0
WNI_CFG_RADAR_CHANNEL_LIST S 20 8
V RW NP RESTART
NONE
15 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
V RW NP RESTART
NONE
15 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
*
* Local Power Constraint (dBm)
*
WNI_CFG_LOCAL_POWER_CONSTRAINT I 4 12
V RW NP RESTART
NONE
0 255 0
V RW NP RESTART
NONE
0 255 0
* *********************************************************
*
* Admission Control Policy
* used for admitting tspec's when either edca or hcca are in use
*
WNI_CFG_ADMIT_POLICY I 4 8
V RW NP RESTART
NONE
0 2 0
V RW NP
SCH
0 2 0
#ENUM ADMIT_ALL 0
#ENUM REJECT_ALL 1
#ENUM BW_FACTOR 2
*
* Oversubscription factor for admission control
* valid only when admit policy is set to BW_FACTOR
* units are in terms of 1/10th of available bandwidth
*
WNI_CFG_ADMIT_BWFACTOR I 4 8
V RW NP RESTART
NONE
0 100 20
V RW NP
SCH
0 100 20
* *********************************************************
*
* Number of "consecutive" Background Scan Failure needed
* before LIM is forced to perform 1 aggressive background scan
*
WNI_CFG_MAX_CONSECUTIVE_BACKGROUND_SCAN_FAILURE I 4 8
V RW NP RESTART
NONE
0 256 60
V RW NP RESTART
NONE
0 256 60
*************************************
* Feature: Channel Bonding
*************************************
*
* Global flag to enable/disable Channel Bonding
* 0 - Disable: Force disable channel bonding for all TC-ids
* 1 - Enable: Force enable channel bonding for all TC-ids
* 2 - no legacy bss: Enable channel bonding if no legacy BSS are present
* 3 - no legacy all: Enable channel bonding if no legacy BSS or devices are present
* 4 - intelligent: Enable channel bonding depending on load level on secondary channel
*
WNI_CFG_CHANNEL_BONDING_MODE I 4 12
V RW NP RESTART
LIM
0 10 0
V RW NP RESTART
LIM
0 10 0
#ENUM DISABLE 0
#ENUM ENABLE 1
#ENUM IF_NO_LEGACY_BSS 2
#ENUM IF_NO_LEGACY_ALL 3
#ENUM INTELLIGENT 4
*
* When the channel is 40MHz wide, this CFG indicates
* if the secondary channel is located above (at
* a higher frequency), or located below (at a
* lower frequency).
*
* 0 - There is no secondary channel. The channel is 20Mhz
* 1 - LOWER: Secondary channel 40MHZ is located below the primary channel
* 2 - CENTERED:Secondary channel and primary located at centered
* 3 - HIGHER: Secondary channel 40 MHZ is located above the primary channel
* 4 - 80MHZ_LOW_CENTERED : 20/40MHZ offset LOW 40/80MHZ offset CENTERED
* 5 - 80MHZ_CENTERED_CENTERED : 20/40MHZ offset CENTERED 40/80MHZ offset CENTERED
* 6 - 80MHZ_HIGH_CENTERED : 20/40MHZ offset HIGH 40/80MHZ offset CENTERED
* 7 - 80MHZ_LOW_LOW: 20/40MHZ offset LOW 40/80MHZ offset LOW
* 8 - 80MHZ_HIGH_LOW: 20/40MHZ offset HIGH 40/80MHZ offset LOW
* 9 - 80MHZ_LOW_HIGH: 20/40MHZ offset LOW 40/80MHZ offset HIGH
* 10 - 80MHZ_HIGH_HIGH: 20/40MHZ offset HIGH 40/80MHZ offset HIGH
*
WNI_CFG_CB_SECONDARY_CHANNEL_STATE I 4 12
V RW NP
NONE
0 10 0
V RW NP
NONE
0 10 0
#ENUM NONE 0
#ENUM LOWER 1
#ENUM HIGHER 2
#ENUM 11AC_20MHZ_LOW_40MHZ_CENTERED 3
#ENUM 11AC_20MHZ_CENTERED_40MHZ_CENTERED 4
#ENUM 11AC_20MHZ_HIGH_40MHZ_CENTERED 5
#ENUM 11AC_20MHZ_LOW_40MHZ_LOW 6
#ENUM 11AC_20MHZ_HIGH_40MHZ_LOW 7
#ENUM 11AC_20MHZ_LOW_40MHZ_HIGH 8
#ENUM 11AC_20MHZ_HIGH_40MHZ_HIGH 9
*************************************
* Feature: Dynamic Retry Rates
*************************************
*
* When the short/long retry count reach the
* adaptive_retry_threshold(0), then the retry0
* template shall be used
*
WNI_CFG_DYNAMIC_THRESHOLD_ZERO I 4 12
V RW NP
HAL
0 255 2
V RW NP
HAL
0 255 2
*
* When the short/long retry count reach the
* adaptive_retry_threshold(1), then the retry1
* template shall be used
*
WNI_CFG_DYNAMIC_THRESHOLD_ONE I 4 12
V RW NP
HAL
0 255 4
V RW NP
HAL
0 255 4
*
* When the short/long retry count reach the
* adaptive_retry_threshold(2), then the retry2
* template shall be used
*
WNI_CFG_DYNAMIC_THRESHOLD_TWO I 4 12
V RW NP
HAL
0 255 6
V RW NP
HAL
0 255 6
*
* Trigger Station Background Scan Flag
*
WNI_CFG_TRIG_STA_BK_SCAN I 4 12
V RW NP
LIM
0 1 0
V RW NP
LIM
0 1 1
* *********************************************************
* control of dynamic EDCA parameter profile switching
*
* OOB, we would like to support WMM standard edca profile
* However, when Airgo STA's join the BSS, we would like
* to switch the profile to Airgo high-performance edca parameters
*
* This cfg supports that behaviour. It is used only if 11e qos
* has been enabled and is ignored otherwise.
*
* When set to any value (other than unused), it determines the
* edca profile to switch to when an Airgo STA joins the BSS.
*
* By default, we choose to switch to Airgo profile.
*
* NOTE: This parameter applies only to an AP
*
WNI_CFG_DYNAMIC_PROFILE_SWITCHING I 4 8
V RW NP RESTART
NONE
0 255 255
V RW NP RESTART
NONE
0 255 1
#ENUM UNUSED 255
* *********************************************************
*
* Scan control list
* Contains pairs of {channelNumber, activeScanAllowedFlag}
* where scanType = 1 indicates active scan is allowed, and
* = 0 indicates passive scan is used
* If a channel is not on this list, active scan is NOT allowed. So it is
* sufficient to inlude only those channels where active scan is allowed
* on this list.
*
* The list determines only whether active scan is allowed or not; it does not
* determine which type of scan is actually performed.
*
WNI_CFG_SCAN_CONTROL_LIST S 128 8
V RW NP RESTART
LIM
112 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 1 10 1 11 1 12 1 13 1 14 1 34 1 36 1 38 1 40 1 42 1 44 1 46 1 48 1 50 1 52 0 54 0 56 0 58 0 60 0 62 0 64 0 100 0 104 0 108 0 112 0 116 0 120 0 124 0 128 0 132 0 136 0 140 0 149 1 151 1 153 1 155 1 157 1 159 1 161 1 165 1 240 1 242 1 244 1 246 1 248 1 250 1 252 1
V RW NP RESTART
LIM
112 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 1 10 1 11 1 12 1 13 1 14 1 34 1 36 1 38 1 40 1 42 1 44 1 46 1 48 1 50 1 52 0 54 0 56 0 58 0 60 0 62 0 64 0 100 0 104 0 108 0 112 0 116 0 120 0 124 0 128 0 132 0 136 0 140 0 149 1 151 1 153 1 155 1 157 1 159 1 161 1 165 1 240 1 242 1 244 1 246 1 248 1 250 1 252 1
* ****************************************
*
* MIMO rates enabled (for rate adaptation, to start)
*
WNI_CFG_MIMO_ENABLED I 4 9
V RW NP RELOAD
NONE
0 1 1
V RW NP RELOAD
NIM
0 1 1
#ENUM ENABLE 1
#ENUM DISABLE 0
*
* BLOCK ACK Enabled (change requires restart)
* change default to ON
* bit 0 ==> delayed BA
* bit 1 ==> immediate BA
WNI_CFG_BLOCK_ACK_ENABLED I 4 8
V RW NP RESTART
LIM
0 3 0
V RW NP RESTART
LIM
0 3 0
#ENUM DELAYED 0
#ENUM IMMEDIATE 1
*
*BA Activity check global timer
*
WNI_CFG_BA_ACTIVITY_CHECK_TIMEOUT I 4 7
V RW NP
HAL
0 65535 1000
V RW NP
HAL
0 65535 1000
*
* Rx STBC support
*
WNI_CFG_HT_RX_STBC I 4 7
V RW NP RESTART
LIM
0 3 1
V RW NP RESTART
LIM
0 3 1
*
* 1. HT capabilities Info: 2 bytes size
*
* Supported channel Width is set to 1 (40 Mhz)
* SM Power Save is disabled.
* GreenField support is enabled.
* Short GI for 20 and 40Mhz is enabled.
* Max AMSDU Size is set to 0(3839 Octets)
* DSSS-CCK Mode is enabled.
* LSIG TXOP Protection is disabled
* Rest of the features are not supported at this moment.
*
* fedc ba98 7654 3210
* 0000 0001 0010 0000
*
WNI_CFG_HT_CAP_INFO I 4 10
V RW NP RESTART
LIM
0 0xffff 0x016c
V RW NP RESTART
LIM
0 0xffff 0x106e
#ENUM ADVANCE_CODING 0
#ENUM SUPPORTED_CHAN_WIDTH_SET 1
#ENUM SM_POWER_SAVE 2
#ENUM GREEN_FIELD 4
#ENUM SHORT_GI_20MHZ 5
#ENUM SHORT_GI_40MHZ 6
#ENUM TX_STBC 7
#ENUM RX_STBC 8
#ENUM DELAYED_BA 10
#ENUM MAX_AMSDU_SIZE 11
#ENUM DSSS_CCK_MODE_40MHZ 12
#ENUM PSMP 13
#ENUM STBC_CONTROL_FRAME 14
#ENUM LSIG_TXOP_PROTECTION 15
*
* 2. HT Parameters Info: 1 byte size
*
* Max AMPDU Rx Factor is defined using bit #0 and #1
* MPDU Density is defined using bit #2 thru #4.
* The default values are,
* 7654 3210
* 0000 0010 --> 2 for RX AMPDU Factor, 0 for MPDU density
*
WNI_CFG_HT_AMPDU_PARAMS I 4 7
V RW NP RESTART
LIM
0 0xff 0x00
V RW NP RESTART
LIM
0 0xff 0x02
#ENUM MAX_RX_AMPDU_FACTOR 0
#ENUM MPDU_DENSITY 2
#ENUM RESERVED 5
*
* 3. Supported MCS Set: 16 bytes size
*
* MCS #0-15 and #32 is supported.
*
WNI_CFG_SUPPORTED_MCS_SET S 16 7
V RW P RESTART
LIM
16 255 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
V RW P RESTART
LIM
16 255 255 0 0 1 0 0 0 0 0 0 0 0 0 0 0
*
* 4. Extended HT Capabilities Info: 2 bytes size
*
* Only HTC Support is enabled, rest all features are not
* supported at this moment.
*
* fedc ba98 7654 3210
* 0000 0100 0000 0000
*
WNI_CFG_EXT_HT_CAP_INFO I 4 10
V RW P RESTART
LIM
0 0xffff 0x0400
V RW P RESTART
LIM
0 0xffff 0x0400
#ENUM PCO 0
#ENUM TRANSITION_TIME 1
#ENUM RESERVED1 3
#ENUM MCS_FEEDBACK 8
#ENUM HTC_SUPPORT 10
#ENUM RD_RESPONDER 11
#ENUM RESERVED2 12
*
* 5. Transmit Beam Forming Capabiliries Info: 4 bytes size
*
WNI_CFG_TX_BF_CAP I 4 7
V RO NP RESTART
LIM
0 0xffffffff 0x00000000
V RO NP RESTART
LIM
0 0xffffffff 0x00000000
*
* 6. Antenna Selection Capabilities: 1 byte size
*
WNI_CFG_AS_CAP I 4 7
V RW P RESTART
LIM
0 0xff 0x00
V RW P RESTART
LIM
0 0xff 0x00
#ENUM ANTENNA_SELECTION 0
#ENUM EXPLICIT_CSI_FEEDBACK_TX 1
#ENUM ANTENNA_INDICES_FEEDBACK_TX 2
#ENUM EXPLICIT_CSI_FEEDBACK 3
#ENUM ANTENNA_INDICES_FEEDBACK 4
#ENUM RX_AS 5
#ENUM TX_SOUNDING_PPDUS 6
#ENUM RESERVED 7
**************************************************
* Beacon HT (High Through) Info IE
***************************************************
*
* 3. HT Info Field1: 1 byte size.
*
* Secondary Channel Offset is set to 3 (Down) by default and will
* be updated dynamically by DFS algorithm.
* Channel Width is set to 1 (40 Mhz)
* RIFS Mode is enabled
* Rest of the features are not supported at this moment.
*
* 7654 3210
* 0000 1111
*
WNI_CFG_HT_INFO_FIELD1 I 4 10
V RW NP RESTART
LIM
0 0xff 0x0f
V RW NP RESTART
LIM
0 0xff 0x0f
#ENUM SECONDARY_CHANNEL_OFFSET 0
#ENUM RECOMMENDED_CHANNEL_WIDTH 2
#ENUM RIFS_MODE 3
#ENUM PSMP_ACCESS_ONLY 4
#ENUM SERVICE_INTERVAL_GRANULARITY 5
*
* 4. HT Info Field2: 2 bytes
*
* Operation mode is set to 0(Pure, GF) to begin with and
* will be updated dynamically.
* 'NonGF Devices present is also set to zero and
* will be updated dynamically.
*
* fedc ba98 7654 3210
* 0000 0000 0000 0000
*
WNI_CFG_HT_INFO_FIELD2 I 4 10
V RW P
LIM
0 0xffff 0x00
V RW P
LIM
0 0xffff 0x00
#ENUM OP_MODE 0
#ENUM NON_GF_DEVICES_PRESENT 2
#ENUM RESERVED 3
*
* 5. HT Info Field3: 2 bytes
*
* fedc ba98 7654 3210
* 0000 0000 0000 0000
*
* LSIG TXOP Full Protection will be zero to begin with and
* updated dynamically.
* Everything else is not supported at this moment.
*
WNI_CFG_HT_INFO_FIELD3 I 4 10
V RW P
LIM
0 0xffff 0x0000
V RW P
LIM
0 0xffff 0x0000
#ENUM BASIC_STBC_MCS 0
#ENUM DUAL_STBC_PROTECTION 7
#ENUM SECONDARY_BEACON 8
#ENUM LSIG_TXOP_PROTECTION_FULL_SUPPORT 9
#ENUM PCO_ACTIVE 10
#ENUM PCO_PHASE 11
#ENUM RESERVED 12
*
* 6. Basic MCS Set: 16 bytes size
*
* For now set this to zero and don't put any restrictions.
*
WNI_CFG_BASIC_MCS_SET S 16 7
V RW P RESTART
LIM
16 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
V RW P RESTART
LIM
16 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*
* 7. Current supported MCS Set: 16 bytes size
*
* For now set this to zero and don't put any restrictions.
*
WNI_CFG_CURRENT_MCS_SET S 16 7
V RW P RESTART
LIM
16 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
V RW P RESTART
LIM
16 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*
* Greenfield Capability
* By default Greenfield is enabled
*
WNI_CFG_GREENFIELD_CAPABILITY I 4 7
V RW NP RESTART
LIM
0 1 0
V RW NP RESTART
LIM
0 1 0
#ENUM ENABLE 1
#ENUM DISABLE 0
*
* Maximum AMPDU Length
* By default set to zero for 3895 octets
*
WNI_CFG_VHT_MAX_MPDU_LENGTH I 4 19
V RW NP
LIM
0 2 0
V RW NP
LIM
0 2 0
*
* Supported Channel Width Set
* By default set to zero for
* STAs does not support either 160 or 80+80MHz
*
WNI_CFG_VHT_SUPPORTED_CHAN_WIDTH_SET I 4 19
V RW NP
LIM
0 0 0
V RW NP
LIM
0 0 0
*
* LDPC Coding Capability
* Riva/Pronto supports, default set to 1
*
WNI_CFG_VHT_LDPC_CODING_CAP I 4 19
V RW NP
LIM
0 1 0
V RW NP
LIM
0 1 0
*
* Short GI for 80MHz
* Riva/Pronto supports, default set to 1
*
WNI_CFG_VHT_SHORT_GI_80MHZ I 4 19
V RW NP
LIM
0 1 1
V RW NP
LIM
0 1 1
*
* Short GI for 160MHz and 80+80MHz
* Riva/Pronto does not supports, default set to 0
*
WNI_CFG_VHT_SHORT_GI_160_AND_80_PLUS_80MHZ I 4 19
V RW NP
LIM
0 1 0
V RW NP
LIM
0 1 0
*
* Support for Transmission of 2x1 STBC
* Riva/Pronto does not supports, default set to 0
*
WNI_CFG_VHT_TXSTBC I 4 19
V RW NP
LIM
0 1 0
V RW NP
LIM
0 1 0
*
* Support for Reception of PPDUs using STBC
* Riva/Pronto supports, default set to 1
*
WNI_CFG_VHT_RXSTBC I 4 19
V RW NP
LIM
0 1 1
V RW NP
LIM
0 1 1
*
* Support for Operating as SU Beamformer
* Riva/Pronto does not supports, default set to 0
*
WNI_CFG_VHT_SU_BEAMFORMER_CAP I 4 19
V RW NP
LIM
0 1 0
V RW NP
LIM
0 1 0
*
* Support for Operating as SU Beamformee
* Riva does not support, But Pronto supports, default set to 0
*
WNI_CFG_VHT_SU_BEAMFORMEE_CAP I 4 19
V RW NP
LIM
0 1 1
V RW NP
LIM
0 1 1
*
* Compressed Steering Number of Beamformer Antennas Supported
* Riva does not support,Pronto supports, default set to 0
*
WNI_CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED I 4 19
V RW NP
LIM
0 4 0
V RW NP
LIM
0 4 0
*
* Number of Sounding Dimensions indicates Number
* of antennas used by the beamformer when sending beamformed transmissions
* Riva/Pronto does not support beamformer, default set to 0
*
WNI_CFG_VHT_NUM_SOUNDING_DIMENSIONS I 4 19
V RW NP
LIM
0 3 0
V RW NP
LIM
0 3 0
*
* MU Beamformer Capable
* Riva/Pronto does not support, default set to 0
*
WNI_CFG_VHT_MU_BEAMFORMER_CAP I 4 19
V RW NP
LIM
0 1 0
V RW NP
LIM
0 1 0
*
* MU Beamformee Capable
* Riva does not support but pronto supports, default set to 0
*
WNI_CFG_VHT_MU_BEAMFORMEE_CAP I 4 19
V RW NP
LIM
0 1 0
V RW NP
LIM
0 1 0
*
* VHT TXOP PS
* Riva does not support but pronto supports, default set to 0
*
WNI_CFG_VHT_TXOP_PS I 4 19
V RW NP
LIM
0 1 0
V RW NP
LIM
0 1 0
*
* +HTC-VHT Capable
* Riva does not support but pronto supports, default set to 0
*
WNI_CFG_VHT_HTC_VHTC_CAP I 4 19
V RW NP
LIM
0 1 0
V RW NP
LIM
0 1 0
*
* Maximum AMPDU Length exponent range 0-7
* 2^(13+Max AMPDU Length)-1, default set to 0
*
WNI_CFG_VHT_AMPDU_LEN_EXPONENT I 4 19
V RW NP
LIM
0 7 3
V RW NP
LIM
0 7 3
*
* VHT Link Adaptation Capable
* Riva does not support but pronto supports, default set to 0
*
WNI_CFG_VHT_LINK_ADAPTATION_CAP I 4 19
V RW NP
LIM
0 3 0
V RW NP
LIM
0 3 0
*
* VHT Rx Antenna Pattern Consistency
*
WNI_CFG_VHT_RX_ANT_PATTERN I 4 19
V RW NP
LIM
0 1 1
V RW NP
LIM
0 1 1
*
* VHT Tx Antenna Pattern Consistency
*
WNI_CFG_VHT_TX_ANT_PATTERN I 4 19
V RW NP
LIM
0 1 1
V RW NP
LIM
0 1 1
*
* RxMCS Map is 16 bits, The 2bit Max MCS for n SS field.
* Indicates the maximum MCS that can be received for each
* number of spacial streams. Riva supports MCS 0-9
*
WNI_CFG_VHT_RX_MCS_MAP I 4 19
V RW NP
LIM
0 0xFFFF 0xFFFE
V RW NP
LIM
0 0xFFFF 0xFFFE
* TxMCS Map is 16 bits, The 2bit Max MCS for n SS field.
* Indicates the maximum MCS that can be transmitted for each
* number of spacial streams.
*
WNI_CFG_VHT_TX_MCS_MAP I 4 19
V RW NP
LIM
0 0xFFFF 0xFFFE
V RW NP
LIM
0 0xFFFF 0xFFFE
*
* Rx Highest supported data rate.
*
WNI_CFG_VHT_RX_HIGHEST_SUPPORTED_DATA_RATE I 4 19
V RW NP
LIM
0 780 780
V RW NP
LIM
0 780 780
*
* Tx Highest supported data rate.
*
WNI_CFG_VHT_TX_HIGHEST_SUPPORTED_DATA_RATE I 4 19
V RW NP
LIM
0 780 780
V RW NP
LIM
0 780 780
*
* Channel center freq Seg1
*
WNI_CFG_VHT_CHANNEL_CENTER_FREQ_SEGMENT1 I 4 19
V RW NP
LIM
0 256 0
V RW NP
LIM
0 256 0
*
* Channel center freq Seg2 for 80+80 Mhz
*
WNI_CFG_VHT_CHANNEL_CENTER_FREQ_SEGMENT2 I 4 19
V RW NP
LIM
0 0 0
V RW NP
LIM
0 0 0
*
* Basic MCS Set
*
WNI_CFG_VHT_BASIC_MCS_SET I 4 19
V RW NP
LIM
0 0xFFFF 0xFFFE
V RW NP
LIM
0 0xFFFF 0xFFFE
*
* MU-MIMO Capable STA Count
*
WNI_CFG_VHT_MU_MIMO_CAP_STA_COUNT I 4 19
V RW NP
LIM
0 4 0
V RW NP
LIM
0 4 0
*
* Spatial Stream Under-Utilization
*
WNI_CFG_VHT_SS_UNDER_UTIL I 4 19
V RW NP
LIM
0 0 0
V RW NP
LIM
0 0 0
*
* Forty MHZ Utilization
*
WNI_CFG_VHT_40MHZ_UTILIZATION I 4 19
V RW NP
LIM
0 0 0
V RW NP
LIM
0 0 0
*
* Eighty MHz Utilization
*
WNI_CFG_VHT_80MHZ_UTILIZATION I 4 19
V RW NP
LIM
0 0 0
V RW NP
LIM
0 0 0
*
* Hundred Sixty MHz Utilization
*
WNI_CFG_VHT_160MHZ_UTILIZATION I 4 19
V RW NP
LIM
0 0 0
V RW NP
LIM
0 0 0
*
* Maximum AMSDU length
* User can set it to either 3839 or 7935 bytes.
*
WNI_CFG_MAX_AMSDU_LENGTH I 4 7
V RW NP RESTART
LIM
0 1 0
V RW NP RESTART
LIM
0 1 0
#ENUM SHORT_3839_BYTES 0
#ENUM LONG_7935__BYTES 1
*
* Minimum MPDU Start Spacing
* Determines the minimum time between the start of adjacent MPDUs within an AMPDU.
* Set to 0 for no restriction
* Set to 1 for 1/4 s
* Set to 2 for 1/2 s
* Set to 3 for 1 s
* Set to 4 for 2 s
* Set to 5 for 4 s
* Set to 6 for 8 s
* Set to 7 for 16 s
* default is set to 0
WNI_CFG_MPDU_DENSITY I 4 7
V RW NP RESTART
LIM
0 7 0
V RW NP RESTART
LIM
0 7 0
*
* NUM BUFFERS ADVERTISED
* Defines number of buffers advertised in ADDBA
*
WNI_CFG_NUM_BUFF_ADVERT I 4 7
V RW NP
LIM
0 128 64
V RW NP
LIM
0 128 64
*
* Maximum Rx AMPDU Factor
* Indicates the maximum length of A-MPDU
* that the STA can receive.
* The Maximum Rx A-MPDU defined by this field is equal to (2 ^ (13 + MAX RX AMPDU FActor))-1 octets.
* Maximum Rx A-MPDU Factor is an integer in the range 0 to 3.
* default is set to 2 for 32K max RX side.
*
WNI_CFG_MAX_RX_AMPDU_FACTOR I 4 7
V RW NP RESTART
LIM
0 3 3
V RW NP RESTART
LIM
0 3 3
*
* Short GI support for the reception of 20Mhz packets
* By default it is enabled
*
WNI_CFG_SHORT_GI_20MHZ I 4 7
V RW NP RESTART
LIM
0 1 1
V RW NP RESTART
LIM
0 1 1
#ENUM ENABLE 1
#ENUM DISABLE 0
*
* Short GI support for the reception of 40Mhz packets
* By default it is enabled
*
WNI_CFG_SHORT_GI_40MHZ I 4 7
V RW NP RESTART
LIM
0 1 0
V RW NP RESTART
LIM
0 1 1
#ENUM ENABLE 1
#ENUM DISABLE 0
*
* RIFS support on TX Side
* on RX side it is always supported, it is mandatory
*
WNI_CFG_RIFS_ENABLED I 4 7
V RW NP RESTART
NONE
0 1 1
V RW NP RESTART
NONE
0 1 1
#ENUM ENABLE 1
#ENUM DISABLE 0
* *********************************************************
*
* Power Save Configuration
*
WNI_CFG_MAX_PS_POLL I 4 5
V RW NP
LIM
0 255 0
NV RW NP
LIM
0 255 0
WNI_CFG_NUM_BEACON_PER_RSSI_AVERAGE I 4 5
V RW NP
LIM
1 20 20
NV RW NP
LIM
1 20 20
*
* Period for which Firmware will collect the
* RSSI stats. Its in units of beacon interval.
* Rssi Filter period should always be >=
* the num_beacon_per_rssi_average.
*
WNI_CFG_RSSI_FILTER_PERIOD I 4 5
V RW NP
LIM
0 255 5
NV RW NP
LIM
0 255 5
WNI_CFG_MIN_RSSI_THRESHOLD I 4 5
V RW NP
LIM
0 10 10
NV RW NP
LIM
0 10 10
WNI_CFG_NTH_BEACON_FILTER I 4 5
V RW NP
LIM
0 255 10
NV RW NP
LIM
0 255 10
WNI_CFG_BROADCAST_FRAME_FILTER_ENABLE I 4 5
V RW NP
LIM
0 1 0
NV RW NP
LIM
0 1 0
WNI_CFG_SCAN_IN_POWERSAVE I 4 5
V RW NP
LIM
0 1 1
V RW NP
LIM
0 1 1
*
* Ignore DTIM support - If disabled(value=0), HAL will
* try to align the Listen Interval to the DTIM
* period and the following rules will be applied:
* 1) If LI=DTIM, then set LI=DTIM
* 2) If LI<DTIM, then align LI to DTIM
* 3) If LI>DTIM, then set LI=DTIM
*
WNI_CFG_IGNORE_DTIM I 4 5
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
* *********************************************************
*
* WoWLAN Configuration The following configurations
* are valid only when magicPktEnable = 1.
*
WNI_CFG_WOWLAN_UCAST_PATTERN_FILTER_ENABLE I 4 5
V RW NP
NONE
0 1 1
NV RW NP
NONE
0 1 0
WNI_CFG_WOWLAN_CHANNEL_SWITCH_ENABLE I 4 5
V RW NP
NONE
0 1 1
NV RW NP
NONE
0 1 0
WNI_CFG_WOWLAN_DEAUTH_ENABLE I 4 5
V RW NP
NONE
0 1 1
NV RW NP
NONE
0 1 0
WNI_CFG_WOWLAN_DISASSOC_ENABLE I 4 5
V RW NP
NONE
0 1 1
NV RW NP
NONE
0 1 0
WNI_CFG_WOWLAN_MAX_MISSED_BEACON I 4 5
V RW NP
NONE
0 65535 40
NV RW NP
NONE
0 65535 40
*
* Timeout value in units of us. It requests
* hardware to unconditionally wake up after
* it has stayed in WoWLAN mode for some time.
*
WNI_CFG_WOWLAN_MAX_SLEEP_PERIOD I 4 5
V RW NP
NONE
0 65535 65535
NV RW NP
NONE
0 65535 65535
*
* BA timeout in TUs, set to 1 minute = approx 58593 TUs
* 16 bit wide
*
WNI_CFG_BA_TIMEOUT I 4 7
V RW NP RESTART
HAL
0 0xffff 0
V RW NP
HAL
0 0xffff 0
*
* This threshold is registered with a traffic monitoring interface (probably HAL),
* on a per-STA, per-TID basis. Once this threshold has been reached,
* HAL will indicate to PE that the threshold has been reached for that TID.
* PE is then free to negotiate a BA session for that peer
* defaults to 128
* 16 bit wide
*
WNI_CFG_BA_THRESHOLD_HIGH I 4 7
V RW NP RESTART
HAL
0 0xffff 0x80
V RW NP
HAL
0 0xffff 0x80
*
* MAX BA Buffers to be allocated.
* This count is system wide.
* 16 bit wide
*
WNI_CFG_MAX_BA_BUFFERS I 4 7
V RW NP RESTART
HAL
0 2560 2560
V RW NP
HAL
0 2560 2560
*
* MAX BA Sessions.
* This count is system wide.
* 16 bit wide
*
WNI_CFG_MAX_BA_SESSIONS I 4 7
V RW NP RESTART
HAL
0 64 40
V RW NP
HAL
0 64 40
*
* BA setup based on Traffic
*
WNI_CFG_BA_AUTO_SETUP I 4 7
V RW NP RESTART
HAL
0 1 1
V RW NP RESTART
HAL
0 1 1
#ENUM ENABLE 1
#ENUM DISABLE 0
*
* Decline an ADDBA Request
*
WNI_CFG_ADDBA_REQ_DECLINE I 4 7
V RW NP RESTART
LIM
0 0xff 0
V RW NP RESTART
LIM
0 0xff 0
*
* Delete all Rx BA sessions in 2.4 GHz
* when BTC requests to disable agg.
*
WNI_CFG_DEL_ALL_RX_BA_SESSIONS_2_4_G_BTC I 4 7
V RW NP
LIM
0 1 0
V RW NP
LIM
0 1 0
*
* Valid Channel List
*
WNI_CFG_BG_SCAN_CHANNEL_LIST S 100 8
V RW NP
LIM
55 36 40 44 48 52 56 60 64 1 6 11 34 38 42 46 2 3 4 5 7 8 9 10 12 13 14 100 104 108 112 116 120 124 128 132 136 140 149 151 153 155 157 159 161 50 54 58 62 240 242 244 246 248 250 252
V RW NP
LIM
55 36 40 44 48 52 56 60 64 1 6 11 34 38 42 46 2 3 4 5 7 8 9 10 12 13 14 100 104 108 112 116 120 124 128 132 136 140 149 151 153 155 157 159 161 50 54 58 62 240 242 244 246 248 250 252
*
* AMPDU default TX medium Time (in us)
*
WNI_CFG_MAX_MEDIUM_TIME I 4 8
V RW NP
HAL
0 65535 2048
V RW NP
HAL
0 65535 2048
*
* Maximum number of MPDUs in single A-MPDU.
*
WNI_CFG_MAX_MPDUS_IN_AMPDU I 4 8
V RW NP
HAL
0 65535 64
V RW NP
HAL
0 65535 64
*
* Auto BSSID - When set, BSSID is generated automatically in IBSS, else BSSID in cfg will be used.
*
WNI_CFG_IBSS_AUTO_BSSID I 4 0
V RW NP
NONE
0 1 1
NV RW NP
NONE
0 1 1
*
* Include Additional IEs in probe request.
*
WNI_CFG_PROBE_REQ_ADDNIE_FLAG I 4 0
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
*
* Include Additional IE in probe request.
*
WNI_CFG_PROBE_REQ_ADDNIE_DATA S 255 0
V RW NP
NONE
0 0
V RW NP
NONE
0 0
*
* Include Additional IEs in probe response.
*
WNI_CFG_PROBE_RSP_ADDNIE_FLAG I 4 0
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
*
* Include Additional IE in probe response.
*
WNI_CFG_PROBE_RSP_ADDNIE_DATA1 S 255 0
V RW NP
NONE
0 0
V RW NP
NONE
0 0
*
* Include Additional IE in probe response.
*
WNI_CFG_PROBE_RSP_ADDNIE_DATA2 S 255 0
V RW NP
NONE
0 0
V RW NP
NONE
0 0
*
* Include Additional IE in probe response.
*
WNI_CFG_PROBE_RSP_ADDNIE_DATA3 S 255 0
V RW NP
NONE
0 0
V RW NP
NONE
0 0
*
* Include Additional IEs in assoc response.
*
WNI_CFG_ASSOC_RSP_ADDNIE_FLAG I 4 0
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
*
* Include Additional IE in assoc response.
*
WNI_CFG_ASSOC_RSP_ADDNIE_DATA S 255 0
V RW NP
NONE
0 0
V RW NP
NONE
0 0
*
* Include Additional P2P IEs in probe request.
*
WNI_CFG_PROBE_REQ_ADDNP2PIE_FLAG I 4 0
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
*
* Include Additional P2P IE in probe request.
*
WNI_CFG_PROBE_REQ_ADDNP2PIE_DATA S 255 0
V RW NP
NONE
0 0
V RW NP
NONE
0 0
*
* Include Additional IEs in probe response/beacon.
*
WNI_CFG_PROBE_RSP_BCN_ADDNIE_FLAG I 4 0
V RW NP
LIM
0 1 0
V RW NP
LIM
0 1 0
*
* Include Additional IEs in probe response/beacon.
*
WNI_CFG_PROBE_RSP_BCN_ADDNIE_DATA S 255 0
V RW NP
LIM
0 0
V RW NP
LIM
0 0
*
* wpsApEnable and wpsStaEnable is specified in here
* wpsApEnable is bit #0 and wpsStaEnable is bit #1
*
WNI_CFG_WPS_ENABLE I 4 7
V RW NP
LIM
0 0xff 0
V RW NP
LIM
0 0xff 0
#ENUM AP 1
#ENUM STA 2
WNI_CFG_WPS_STATE I 4 7
V RW NP
LIM
0 0xff 1
V RW NP
LIM
0 0xff 1
*
* TRUE => include this information in Probe Requests, FALSE => omit it
*
WNI_CFG_WPS_PROBE_REQ_FLAG I 4 7
V RW NP
LIM
0 1 0
V RW NP
LIM
0 1 0
*
* Wi-Fi Protected Setup Version
*
* This one-byte field is broken into a four-bit major
* part using the top MSBs and four-bit minor part
* using the LSBs. As an example, version 3.2 would be 0x32.
*
WNI_CFG_WPS_VERSION I 4 7
V RW NP
LIM
0 0xff 0x10
V RW NP
LIM
0 0xff 0x10
*
* Wi-Fi Protected Setup Request type
* 0x00: Enrollee, Info only
* 0x01: Enrollee, open 802.1X
* 0x02: Registrar
* 0x03: WLAN Manager Registrar
WNI_CFG_WPS_REQUEST_TYPE I 4 7
V RW NP
LIM
0 0xff 0x00
V RW NP
LIM
0 0xff 0x03
* Configuration Method(s)
*
* The Config Methods Data component lists the configuration methods
* the Enrollee or Registrar supports. The list is a bitwise OR of
* values from the table below. In addition to Config Methods, APs and
* STAs that support the UPnP Management Interface must support the
* Permitted Config Methods attribute, which is used to control the
* Config Methods that are enabled on that AP.
*
* Value Hardware Interface
* 0x0001 USBA (Flash Drive)
* 0x0002 Ethernet
* 0x0004 Label
* 0x0008 Display
* 0x0010 External NFC Token
* 0x0020 Integrated NFC Token
* 0x0040 NFC Interface
* 0x0080 PushButton
* 0x0100 Keypad
*
* The bottom 16 bits contain the configuration method(s) when acting
* as an Enrollee, and the top 16 when acting as a Registrar.
*
* QNE-TODO: Merge this with the inappropriately named
* 'WNI_CFG_WSC_AP_CFG_METHOD'-- this one can serve both puposes.
*
WNI_CFG_WPS_CFG_METHOD I 4 7
V RW NP
LIM
0 0xFFFFFFFF 0x00000008
V RW NP
LIM
0 0xFFFFFFFF 0x018c018e
* UUID
* The universally unique identifier (UUID) element is a unique
* GUID generated by the Enrollee or Registrar. It uniquely identifies
* an operational device and should survive reboots and resets. The
* UUID is provided in binary format. If the device also supports UPnP,
* then the UUID corresponds to the UPnP UUID.
*
* QNE-TODO: Re-name their cfg from 'WNI_CFG_UUID'
WNI_CFG_WPS_UUID S 16 8
V RW NP
LIM
6 0xa 0xb 0xc 0xd 0xe 0xf
V RW NP
LIM
6 0xa 0xb 0xc 0xd 0xe 0xf
************************************************************************
* The following cfgs contains the primary type of the device. Its format
* follows:
*
* 0 1 2 3
* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Attribute ID | Length |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Category ID | OUI (1-2) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | OUI (3-4) | Sub Category ID |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* Vendor-specific sub-categories are designated by setting the OUI to the
* value associated with that vendor. Note that a four-byte subdivided OUI
* is used. For the predefined values, the Wi-Fi Alliance OUI of 00 50 F2 04
* is used. The predefined values for Category ID and Sub Category ID are
* provided in the next table. There is no way to indicate a vendor-specific
* main device category. The OUI applies only to the interpretation of the
* Sub Category. If a vendor does not use sub categories for their OUI, the
* three-byte OUI occupies the first three bytes of the OUI field and the
* fourth byte is set to zero.
*
* Category ID Value Sub Category ID Value
* Computer 1 PC 1
* Server 2
* Media Center 3
* Input Device 2
* Printers, Scanners, Printer 1
* Faxes and Copiers 3 Scanner 2
* Camera 4 Digital Still Camera 1
* Storage 5 NAS 1
* Network AP 1
* Infrastructure 6 Router 2
* Switch 3
* Displays 7 Television 1
* Electronic Picture Frame 2
* Projector 3
* Multimedia Devices 8 DAR 1
* PVR 2
* MCX 3
* Gaming Devices 9 Xbox 1
* Xbox360 2
* Playstation 3
* Telephone 10 Windows Mobile 1
*
************************************************************************
* QNE-TODO: Rename their cfg from 'WNI_CFG_PRIM_DEVICE_CATEGORY'
WNI_CFG_WPS_PRIMARY_DEVICE_CATEGORY I 4 7
V RW NP
LIM
0 0xffff 1
V RW NP
LIM
0 0xffff 6
* QNE-TODO: Rename their cfg from 'WNI_CFG_PRIM_DEVICE_OUI'
WNI_CFG_WPS_PIMARY_DEVICE_OUI I 4 7
V RW NP
LIM
0 0xffffffff 0x0050f204
V RW NP
LIM
0 0xffffffff 0x0050f204
* QNE-TODO: Rename their cfg from 'WNI_CFG_PRIM_DEVICE_SUB_CATEGORY'
WNI_CFG_WPS_DEVICE_SUB_CATEGORY I 4 7
V RW NP
LIM
0 0xffff 1
V RW NP
LIM
0 0xffff 1
* Association State
*
* The Association State component shows the configuration and previous
* association state of the wireless station when sending a Discovery
* request.
*
* Association State Description
* 0 Not Associated
* 1 Connection Success
* 2 Configuration Failure
* 3 Association Failure
* 4 IP Failure
WNI_CFG_WPS_ASSOCIATION_STATE I 4 7
V RW NP
LIM
0 0xffff 0
V RW NP
LIM
0 0xffff 0
* Configuration Error
*
* The Configuration Error component shows the result of the device
* attempting to configure itself and to associate with the WLAN.
*
* Configuration Error Description
* 0 No Error
* 1 OOB Interface Read Error
* 2 Decryption CRC Failure
* 3 2.4 channel not supported
* 4 5.0 channel not supported
* 5 Signal too weak
* 6 Network auth failure
* 7 Network association failure
* 8 No DHCP response
* 9 Failed DHCP config
* 10 IP address conflict
* 11 Couldnt connect to Registrar
* 12 Multiple PBC sessions detected
* 13 Rogue activity suspected
* 14 Device busy
* 15 Setup locked
* 16 Message Timeout
* 17 Registration Session Timeout
* 18 Device Password Auth Failure
*
* The Device busy error is returned if the sending device is unable to
* respond to the request due to some internal conflict or resource
* contention issue. For example, if a device is only capable of
* performing a single instance of the Registration Protocol at a time,
* it may return this error in response to attempts to start another
* instance in the middle of an active session.
WNI_CFG_WPS_CONFIGURATION_ERROR I 4 7
V RW NP
LIM
0 0xffff 0
V RW NP
LIM
0 0xffff 0
* Device Password ID
*
* This attribute is used to identify a device password. There are six
* predefined values and ten reserved values. If the Device Password ID is
* Default, the Enrollee should use its PIN password (from the label or
* display). This password may correspond to the label, display, or a
* user-defined password that has been configured to replace the original
* device password.
*
* User-specified indicates that the user has overridden the password with a
* manually selected value. Machine-specified indicates that the original
* PIN password has been overridden by a strong, machinegenerated device
* password value. The Rekey value indicates that the device's 256-bit
* rekeying password will be used. The PushButton value indicates that the
* PIN is the all-zero value reserved for the PushButton Configuration
* method.
*
* The Registrar-specified value indicates a PIN that has been obtained from
* the Registrar (via a display or other out-of-band method). This value may
* be further augmented with the optional 'Identity' attribute in M1. This
* augmentation is useful when multiple predefined UserID/PIN pairs have been
* established by a Registrar such as an authenticator used for Hotspot
* access. If the Device Password ID in M1 is not one of the predefined or
* reserved values, it corresponds to a password given to the Registrar as an
* OOB Device Password.
*
* Value Description
* 0x0000 Default (PIN)
* 0x0001 User-specified
* 0x0002 Machine-specified
* 0x0003 Rekey
* 0x0004 PushButton
* 0x0005 Registrar-specified
* 0x0006 - 0x000F Reserved'
*
WNI_CFG_WPS_DEVICE_PASSWORD_ID I 4 7
V RW NP
LIM
0 0xffffffff 0
V RW NP
LIM
0 0xffffffff 0
*
* WPS Association
*
* Wi-Fi Protected Setup requires a prospective enrollee to associate to
* an AP in the network in which the STA would like to enroll. Once
* associated, the enrollment takes place over an EAPOL conversation
* (there's actually a new EAP method: EAP-WSC). The STA would
* presumably send an EAPOL-Start over his new link, to which the AP
* would respond with an EAP Identity Request. When the STA sends back
* "WSC-Enrollee-1" as his EAP Identity, the AP knows that he's got a WPS
* supplicant on his hands, and proceeds to talk EAP-WSC.
*
* Toward the end of the specification's development, a problem came up.
* Microsoft's EAP supplicant on XP SP1 & SP2 will send an EAPOL-Start,
* no matter what. Even if the AP is beaconing WPA-PSK, say, the MS
* supplicant will send an EAPOL-Start. If it receives an EAP Identity
* Request in return, it decides that the AP is really using 802.1x
* authentication, and proceeds on that assumption.
*
* Now, imagine an AP that is configured for WPA-PSK, and is WPS-capable.
* It receives an association request from some STA, and then sees an
* EAPOL-Start from the newly joined STA. It naturally sends back an EAP
* Identity Request to see if the new STA wants to talk EAP-WSC. On
* Windows XP SP1 & SP2, the supplicant will take that to mean that this
* AP is using 802.1x authentication, and will never let the user provide
* the PSK. Consequently, WZC will never be able to associate with this
* AP.
*
* Naturally, Microsoft's solution was to have the world change to
* accommodate them. After a lot of back & forth, the WFA decided on the
* following change to the WPS spec: when associating for purposes of WPS
* enrollment, "A client that intends to use the EAP-WSC method with a
* WSC enabled AP may include a WSC IE in its 802.11 (re)association
* request. If a WSC IE is present in the (re)association request, the AP
* shall engage in EAP-WSC with the station and must not attempt other
* security handshake. If the client does not include a WSC IE in its
* 802.11 (re)association request, it must send its 802.11 Authentication
* frame with Authentication set to open and an 802.11 Association
* Request frame without an RSN IE or SSN IE, regardless of the network
* type that is hosted by the AP. On successful association, the client
* will then send an EAPOL-Start to the AP and wait for
* EAP-Request/Identity. When the client receives an EAP Request/
* Identity, it will respond with EAP-Response/Identity and the
* appropriate WSC string to indicate if it is an Enrollee or Registrar.
* '
*
* This configuration variable contains a bitvector:
*
* 0x0001 Incldue the WPS Information Element in Assoc Request frames
* 0x0002 Elide the the WPA and RSN Information Elements from the
* Assoc Request frame
*
WNI_CFG_WPS_ASSOC_METHOD I 4 7
V RW NP
LIM
0 0xffff 0
V RW NP
LIM
0 0xffff 0
*
* Low gain override
*
WNI_CFG_LOW_GAIN_OVERRIDE I 4 9
V RW NP
HAL
0 1 0
V RW NP
HAL
0 1 0
*
* Listen Mode Enable/Disable
*
WNI_CFG_ENABLE_PHY_AGC_LISTEN_MODE I 4 7
V RW NP
HAL
0 128 128
V RW NP
HAL
0 128 128
*
* On chip reodering polling threshold
*
WNI_CFG_RPE_POLLING_THRESHOLD I 4 2
V RW NP
HAL
0 65535 10
V RW NP
HAL
0 65535 10
*
* On chip reodering aging threshold for AC0
*
WNI_CFG_RPE_AGING_THRESHOLD_FOR_AC0_REG I 4 2
V RW NP
HAL
0 65535 30
V RW NP
HAL
0 65535 30
*
* On chip reodering aging threshold for AC1
*
WNI_CFG_RPE_AGING_THRESHOLD_FOR_AC1_REG I 4 2
V RW NP
HAL
0 65535 30
V RW NP
HAL
0 65535 30
*
* On chip reodering aging threshold for AC2
*
WNI_CFG_RPE_AGING_THRESHOLD_FOR_AC2_REG I 4 2
V RW NP
HAL
0 65535 30
V RW NP
HAL
0 65535 30
*
* On chip reodering aging threshold for AC3
*
WNI_CFG_RPE_AGING_THRESHOLD_FOR_AC3_REG I 4 2
V RW NP
HAL
0 65535 30
V RW NP
HAL
0 65535 30
*
* Number of On-Chip reorder sessions
*
WNI_CFG_NO_OF_ONCHIP_REORDER_SESSIONS I 4 2
V RW NP
HAL
0 2 1
V RW NP
HAL
0 2 1
*
* Single RC for all TID
*
WNI_CFG_SINGLE_TID_RC I 4 7
V RW NP
NONE
0 1 1
V RW NP
NONE
0 1 1
*
* TX power control feature
*
WNI_CFG_TX_PWR_CTRL_ENABLE I 4 8
V RW NP
NONE
0 1 1
V RW NP
NONE
0 1 1
*
* MCAST BCAST filter Setting
* 0: No filter, 1: Block Mcast, 2: Block Bcast, 3: Block Mcast and Bcast
*
WNI_CFG_MCAST_BCAST_FILTER_SETTING I 4 7
V RW NP
HAL
0 3 0
V RW NP
HAL
0 3 0
*
* BTC DHCP No of Bt slots to block
*
WNI_CFG_BTC_DHCP_BT_SLOTS_TO_BLOCK I 4 7
V RW NP
HAL
0 0xFF 0
V RW NP
HAL
0 0xFF 0
*
* Config parameter to Enable/Disable Dynamic PS-Poll mechanism
* 0: Disable, x: FW will send x number of NULL frames before switching to PS-Poll mexhanism
*
WNI_CFG_DYNAMIC_PS_POLL_VALUE I 4 7
V RW NP
HAL
0 0xFF 0
V RW NP
HAL
0 0xFF 0
*
* PS Data InActivity Timeout (TU)
*
WNI_CFG_PS_NULLDATA_AP_RESP_TIMEOUT I 4 7
V RW NP
HAL
0 80 0
NV RW NP
NONE
0 80 0
*
* Config parameter to Enable/Disable Telescopic Bcn Wakeups
* 0: Disable, 1: Enable
*
WNI_CFG_TELE_BCN_WAKEUP_EN I 4 7
V RW NP
HAL
0 1 0
V RW NP
HAL
0 1 0
*
* Config parameter for Transient LI
* 0: Disable, x: Transient LI
*
WNI_CFG_TELE_BCN_TRANS_LI I 4 7
V RW NP
HAL
0 7 3
V RW NP
HAL
0 7 3
*
* Config parameter for Idle bcns for Transient LI
* x: Num Idle bcns before switch to trans LI
*
WNI_CFG_TELE_BCN_TRANS_LI_IDLE_BCNS I 4 7
V RW NP
HAL
5 255 10
V RW NP
HAL
5 255 10
*
* Config parameter for Max LI
* 0: Disable, x: Max LI
*
WNI_CFG_TELE_BCN_MAX_LI I 4 7
V RW NP
HAL
0 7 5
V RW NP
HAL
0 7 5
*
* Config parameter for Idle bcns for max LI
* x: Num Idle bcns before switch to max LI
*
WNI_CFG_TELE_BCN_MAX_LI_IDLE_BCNS I 4 7
V RW NP
HAL
5 255 15
V RW NP
HAL
5 255 15
*
* BTC DHCP No of Bt sub interval during DHCP
*
WNI_CFG_BTC_A2DP_DHCP_BT_SUB_INTERVALS I 4 7
V RW NP
HAL
0 0xFF 7
V RW NP
HAL
0 0xFF 7
*
* Infra STA mode Keep alive period (in secs) for
* sending keep alive (Qos)Null frames to the AP.
* 0 = disabled. Recommended values is 30 secs
*
WNI_CFG_INFRA_STA_KEEP_ALIVE_PERIOD I 4 7
V RW NP
HAL
0 1000 0
V RW NP
HAL
0 1000 0
* Limit on number of associated stations
* (applies to peer stations in IBSS, SoftAP, BT-AMP AP, & P2P-GO modes)
*
WNI_CFG_ASSOC_STA_LIMIT I 4 8
V RW NP
LIM
1 32 10
V RW NP
LIM
1 32 10
*
* SAP channel select start channel number
*
WNI_CFG_SAP_CHANNEL_SELECT_START_CHANNEL I 4 7
V RW NP
NONE
1 0xFC 1
V RW NP
NONE
1 0xFC 1
*
* SAP channel select end channel number
*
WNI_CFG_SAP_CHANNEL_SELECT_END_CHANNEL I 4 7
V RW NP
NONE
1 0xFC 11
V RW NP
NONE
1 0xFC 11
*
* SAP channel select operating band
* 0- 2.4GHZ / 1- Low 5GHZ /2-MID /3-HIGH/4-Japan4.9GHZ
*
WNI_CFG_SAP_CHANNEL_SELECT_OPERATING_BAND I 4 7
V RW NP
NONE
0 0x5 0
V RW NP
NONE
0 0x5 0
*
* Softap data available poll period (in milliseconds) for
* queueing (Qos)Null frames to the station if there
* is no data available and PS-Poll/Trigger frame is pending.
* 0 = disabled. Recommended values is 5ms
*
WNI_CFG_AP_DATA_AVAIL_POLL_PERIOD I 4 8
V RW NP
NONE
0 65535 5
V RW NP
NONE
0 65535 5
*
* Close loop power control will be enabled if value is set to 1
*
*
*
WNI_CFG_ENABLE_CLOSE_LOOP I 4 0
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
*
* LTE Coexistence will be enabled if value is set to 1
*
*
*
WNI_CFG_ENABLE_LTE_COEX I 4 0
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
*
* AP Keep Alive Timeout (TU)
*
WNI_CFG_AP_KEEP_ALIVE_TIMEOUT I 4 7
V RW NP
HAL
1 65535 20
V RW NP
HAL
1 65535 20
*
* GO Keep Alive Timeout (TU)
*
WNI_CFG_GO_KEEP_ALIVE_TIMEOUT I 4 7
V RW NP
HAL
1 65535 20
V RW NP
HAL
1 65535 20
*
* MC Addr List power control will be enabled if value is set to 1
*
*
*
WNI_CFG_ENABLE_MC_ADDR_LIST I 4 0
V RW NP
HAL
0 1 0
V RW NP
HAL
0 1 0
*
* UC Filter will be enabled if value is set to 1
*
*
*
WNI_CFG_ENABLE_UC_FILTER I 4 0
V RW NP
HAL
0 1 0
V RW NP
HAL
0 1 0
*
* Low Power Image Transition will be enabled if value is set to 1
*
*
*
WNI_CFG_ENABLE_LPWR_IMG_TRANSITION I 4 0
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
*
* MCC Adaptive Scheduler will be enabled if value is set to 1
*
*
*
WNI_CFG_ENABLE_MCC_ADAPTIVE_SCHED I 4 0
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
*
*Disable LDPC in STA mode when AP is TXBF capable
*
*
*
WNI_CFG_DISABLE_LDPC_WITH_TXBF_AP I 4 0
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
*
* AP Link Monitor Timeout (TU)
*
WNI_CFG_AP_LINK_MONITOR_TIMEOUT I 4 7
V RW NP
HAL
1 255 3
V RW NP
HAL
1 255 3
*
*TDLS Station's UAPSD MASK Configuration
*
*
*
WNI_CFG_TDLS_QOS_WMM_UAPSD_MASK I 4 7
V RW NP
LIM
0 15 0
V RW NP
LIM
0 15 0
*
*TDLS Stations Buffer STA Capability
*
*
*
WNI_CFG_TDLS_BUF_STA_ENABLED I 4 7
V RW NP
LIM
0 1 0
V RW NP
LIM
0 1 0
*TDLS Stations PUAPSD Inactivity Timer
*
*
*
WNI_CFG_TDLS_PUAPSD_INACT_TIME I 4 7
V RW NP
LIM
0 10 0
V RW NP
LIM
0 10 0
*TDLS Stations PUAPSD RX Frame Threshold
*
*
*
WNI_CFG_TDLS_RX_FRAME_THRESHOLD I 4 7
V RW NP
LIM
10 20 10
V RW NP
LIM
10 20 10
*
* PMF SA Query Maximum Retries
*
WNI_CFG_PMF_SA_QUERY_MAX_RETRIES I 4 1
V RW NP RESTART
NONE
0 20 5
V RW NP RESTART
NONE
0 20 5
*
* PMF SA Query Retry Interval (in TUs)
*
WNI_CFG_PMF_SA_QUERY_RETRY_INTERVAL I 4 1
V RW NP RESTART
NONE
10 2000 200
V RW NP RESTART
NONE
10 2000 200
*
*MCC ENABLE/DISABLE ADAPTIVE RX Drain feature
*
*
*
WNI_CFG_ENABLE_ADAPT_RX_DRAIN I 4 7
V RW NP
HAL
0 1 1
NV RW NP
HAL
0 1 1
*
* FlexConnect Power Factor
* Default is set to 0 (disable)
*
*
WNI_CFG_FLEX_CONNECT_POWER_FACTOR I 4 0
V RW NP
NONE
0 9 0
V RW NP
NONE
0 9 0
*
* Antenna Diversity
*
* 0 = disabled
* 1 = Ant 1
* 2 = Ant 2
* 3 = Adaptive
*
WNI_CFG_ANTENNA_DIVESITY I 4 7
V RW NP
HAL
0 3 0
V RW NP
HAL
0 3 0
* GO Link Monitor Timeout (TU)
*
WNI_CFG_GO_LINK_MONITOR_TIMEOUT I 4 7
V RW NP
HAL
3 50 10
V RW NP
HAL
3 50 10
*
*
* RMC action period frequency (milli seconds)
*
WNI_CFG_RMC_ACTION_PERIOD_FREQUENCY I 4 7
V RW NP
HAL
100 1000 300
V RW NP
HAL
100 1000 300
*
*
* Current RSSI value (of connected AP)
*
WNI_CFG_CURRENT_RSSI I 4 7
V RW NP
NONE
0 127 0
V RW NP
NONE
0 127 0
* RTT3 Bit Value
*
WNI_CFG_RTT3_ENABLE I 1 1
V RW NP
NONE
0 1 1
V RW NP
NONE
0 1 1
* Debug p2p remain on channel
*
WNI_CFG_DEBUG_P2P_REMAIN_ON_CHANNEL I 4 7
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
*
* TDLS Off Channel Implementation
*
WNI_CFG_TDLS_OFF_CHANNEL_ENABLED I 4 7
V RW NP
LIM
0 1 0
V RW NP
LIM
0 1 0
WNI_CFG_IBSS_ATIM_WIN_SIZE I 4 7
V RW NP
NONE
0 100 0
V RW NP
NONE
0 100 0
*
* DFS Master capability (11h) enable/disable
*
WNI_CFG_DFS_MASTER_ENABLED I 4 7
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
WNI_CFG_VHT_ENABLE_TXBF_20MHZ I 4 7
V RW NP
NONE
0 1 0
V RW NP
NONE
0 1 0
*
*TDLS WMM Mode
*
*
WNI_CFG_TDLS_WMM_MODE_ENABLED I 4 7
V RW NP
LIM
0 1 0
V RW NP
LIM
0 1 0