blob: db4f88a9be2b2669d9222d93bf7a77df6c6ef7fe [file] [log] [blame] [edit]
/*
* Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <debug.h>
#include <mmio.h>
#include <stddef.h>
#include <tzc400.h>
#include "tzc_common_private.h"
/*
* Macros which will be used by common core functions.
*/
#define TZC_400_REGION_BASE_LOW_0_OFFSET 0x100
#define TZC_400_REGION_BASE_HIGH_0_OFFSET 0x104
#define TZC_400_REGION_TOP_LOW_0_OFFSET 0x108
#define TZC_400_REGION_TOP_HIGH_0_OFFSET 0x10c
#define TZC_400_REGION_ATTR_0_OFFSET 0x110
#define TZC_400_REGION_ID_ACCESS_0_OFFSET 0x114
/*
* Implementation defined values used to validate inputs later.
* Filters : max of 4 ; 0 to 3
* Regions : max of 9 ; 0 to 8
* Address width : Values between 32 to 64
*/
typedef struct tzc400_instance {
uintptr_t base;
uint8_t addr_width;
uint8_t num_filters;
uint8_t num_regions;
} tzc400_instance_t;
static tzc400_instance_t tzc400;
static inline unsigned int _tzc400_read_build_config(uintptr_t base)
{
return mmio_read_32(base + BUILD_CONFIG_OFF);
}
static inline unsigned int _tzc400_read_gate_keeper(uintptr_t base)
{
return mmio_read_32(base + GATE_KEEPER_OFF);
}
static inline void _tzc400_write_gate_keeper(uintptr_t base, unsigned int val)
{
mmio_write_32(base + GATE_KEEPER_OFF, val);
}
/*
* Get the open status information for all filter units.
*/
#define get_gate_keeper_os(_base) ((_tzc400_read_gate_keeper(_base) >> \
GATE_KEEPER_OS_SHIFT) & \
GATE_KEEPER_OS_MASK)
/* Define common core functions used across different TZC peripherals. */
DEFINE_TZC_COMMON_WRITE_ACTION(400, 400)
DEFINE_TZC_COMMON_WRITE_REGION_BASE(400, 400)
DEFINE_TZC_COMMON_WRITE_REGION_TOP(400, 400)
DEFINE_TZC_COMMON_WRITE_REGION_ATTRIBUTES(400, 400)
DEFINE_TZC_COMMON_WRITE_REGION_ID_ACCESS(400, 400)
DEFINE_TZC_COMMON_CONFIGURE_REGION0(400)
DEFINE_TZC_COMMON_CONFIGURE_REGION(400)
static unsigned int _tzc400_get_gate_keeper(uintptr_t base,
unsigned int filter)
{
unsigned int open_status;
open_status = get_gate_keeper_os(base);
return (open_status >> filter) & GATE_KEEPER_FILTER_MASK;
}
/* This function is not MP safe. */
static void _tzc400_set_gate_keeper(uintptr_t base,
unsigned int filter,
int val)
{
unsigned int open_status;
/* Upper half is current state. Lower half is requested state. */
open_status = get_gate_keeper_os(base);
if (val)
open_status |= (1 << filter);
else
open_status &= ~(1 << filter);
_tzc400_write_gate_keeper(base, (open_status & GATE_KEEPER_OR_MASK) <<
GATE_KEEPER_OR_SHIFT);
/* Wait here until we see the change reflected in the TZC status. */
while ((get_gate_keeper_os(base)) != open_status)
;
}
void tzc400_set_action(tzc_action_t action)
{
assert(tzc400.base);
assert(action <= TZC_ACTION_ERR_INT);
/*
* - Currently no handler is provided to trap an error via interrupt
* or exception.
* - The interrupt action has not been tested.
*/
_tzc400_write_action(tzc400.base, action);
}
void tzc400_init(uintptr_t base)
{
#if DEBUG
unsigned int tzc400_id;
#endif
unsigned int tzc400_build;
assert(base);
tzc400.base = base;
#if DEBUG
tzc400_id = _tzc_read_peripheral_id(base);
if (tzc400_id != TZC_400_PERIPHERAL_ID) {
ERROR("TZC-400 : Wrong device ID (0x%x).\n", tzc400_id);
panic();
}
#endif
/* Save values we will use later. */
tzc400_build = _tzc400_read_build_config(tzc400.base);
tzc400.num_filters = ((tzc400_build >> BUILD_CONFIG_NF_SHIFT) &
BUILD_CONFIG_NF_MASK) + 1;
tzc400.addr_width = ((tzc400_build >> BUILD_CONFIG_AW_SHIFT) &
BUILD_CONFIG_AW_MASK) + 1;
tzc400.num_regions = ((tzc400_build >> BUILD_CONFIG_NR_SHIFT) &
BUILD_CONFIG_NR_MASK) + 1;
}
/*
* `tzc400_configure_region0` is used to program region 0 into the TrustZone
* controller. Region 0 covers the whole address space that is not mapped
* to any other region, and is enabled on all filters; this cannot be
* changed. This function only changes the access permissions.
*/
void tzc400_configure_region0(tzc_region_attributes_t sec_attr,
unsigned int ns_device_access)
{
assert(tzc400.base);
assert(sec_attr <= TZC_REGION_S_RDWR);
_tzc400_configure_region0(tzc400.base, sec_attr, ns_device_access);
}
/*
* `tzc400_configure_region` is used to program regions into the TrustZone
* controller. A region can be associated with more than one filter. The
* associated filters are passed in as a bitmap (bit0 = filter0).
* NOTE:
* Region 0 is special; it is preferable to use tzc400_configure_region0
* for this region (see comment for that function).
*/
void tzc400_configure_region(unsigned int filters,
int region,
unsigned long long region_base,
unsigned long long region_top,
tzc_region_attributes_t sec_attr,
unsigned int nsaid_permissions)
{
assert(tzc400.base);
/* Do range checks on filters and regions. */
assert(((filters >> tzc400.num_filters) == 0) &&
(region >= 0) && (region < tzc400.num_regions));
/*
* Do address range check based on TZC configuration. A 64bit address is
* the max and expected case.
*/
assert(((region_top <= _tzc_get_max_top_addr(tzc400.addr_width)) &&
(region_base < region_top)));
/* region_base and (region_top + 1) must be 4KB aligned */
assert(((region_base | (region_top + 1)) & (4096 - 1)) == 0);
assert(sec_attr <= TZC_REGION_S_RDWR);
_tzc400_configure_region(tzc400.base, filters, region, region_base,
region_top,
sec_attr, nsaid_permissions);
}
void tzc400_enable_filters(void)
{
unsigned int state;
unsigned int filter;
assert(tzc400.base);
for (filter = 0; filter < tzc400.num_filters; filter++) {
state = _tzc400_get_gate_keeper(tzc400.base, filter);
if (state) {
/*
* The TZC filter is already configured. Changing the
* programmer's view in an active system can cause
* unpredictable behavior therefore panic for now rather
* than try to determine whether this is safe in this
* instance.
*
* See the 'ARM (R) CoreLink TM TZC-400 TrustZone (R)
* Address Space Controller' Technical Reference Manual.
*/
ERROR("TZC-400 : Filter %d Gatekeeper already"
" enabled.\n", filter);
panic();
}
_tzc400_set_gate_keeper(tzc400.base, filter, 1);
}
}
void tzc400_disable_filters(void)
{
unsigned int filter;
assert(tzc400.base);
/*
* We don't do the same state check as above as the Gatekeepers are
* disabled after reset.
*/
for (filter = 0; filter < tzc400.num_filters; filter++)
_tzc400_set_gate_keeper(tzc400.base, filter, 0);
}