blob: 69b194a53af1daf33568511347258e2fdf1de04d [file] [log] [blame]
/*
* Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch_helpers.h>
#include <assert.h>
#include <bl_common.h>
#include <console.h>
#include <debug.h>
#include <dw_mmc.h>
#include <emmc.h>
#include <errno.h>
#include <hi6220.h>
#include <mmio.h>
#include <platform.h>
#include <platform_def.h>
#include <string.h>
#include <tbbr/tbbr_img_desc.h>
#include "../../bl1/bl1_private.h"
#include "hikey_def.h"
#include "hikey_private.h"
/*
* Declarations of linker defined symbols which will help us find the layout
* of trusted RAM
*/
extern unsigned long __COHERENT_RAM_START__;
extern unsigned long __COHERENT_RAM_END__;
/*
* The next 2 constants identify the extents of the coherent memory region.
* These addresses are used by the MMU setup code and therefore they must be
* page-aligned. It is the responsibility of the linker script to ensure that
* __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
* page-aligned addresses.
*/
#define BL1_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
#define BL1_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
/* Data structure which holds the extents of the trusted RAM for BL1 */
static meminfo_t bl1_tzram_layout;
enum {
BOOT_NORMAL = 0,
BOOT_USB_DOWNLOAD,
BOOT_UART_DOWNLOAD,
};
meminfo_t *bl1_plat_sec_mem_layout(void)
{
return &bl1_tzram_layout;
}
/*******************************************************************************
* Function that takes a memory layout into which BL2 has been loaded and
* populates a new memory layout for BL2 that ensures that BL1's data sections
* resident in secure RAM are not visible to BL2.
******************************************************************************/
void bl1_init_bl2_mem_layout(const meminfo_t *bl1_mem_layout,
meminfo_t *bl2_mem_layout)
{
assert(bl1_mem_layout != NULL);
assert(bl2_mem_layout != NULL);
/*
* Cannot remove BL1 RW data from the scope of memory visible to BL2
* like arm platforms because they overlap in hikey
*/
bl2_mem_layout->total_base = BL2_BASE;
bl2_mem_layout->total_size = BL32_SRAM_LIMIT - BL2_BASE;
flush_dcache_range((unsigned long)bl2_mem_layout, sizeof(meminfo_t));
}
/*
* Perform any BL1 specific platform actions.
*/
void bl1_early_platform_setup(void)
{
/* Initialize the console to provide early debug support */
console_init(CONSOLE_BASE, PL011_UART_CLK_IN_HZ, PL011_BAUDRATE);
/* Allow BL1 to see the whole Trusted RAM */
bl1_tzram_layout.total_base = BL1_RW_BASE;
bl1_tzram_layout.total_size = BL1_RW_SIZE;
INFO("BL1: 0x%lx - 0x%lx [size = %lu]\n", BL1_RAM_BASE, BL1_RAM_LIMIT,
BL1_RAM_LIMIT - BL1_RAM_BASE); /* bl1_size */
}
/*
* Perform the very early platform specific architecture setup here. At the
* moment this only does basic initialization. Later architectural setup
* (bl1_arch_setup()) does not do anything platform specific.
*/
void bl1_plat_arch_setup(void)
{
hikey_init_mmu_el3(bl1_tzram_layout.total_base,
bl1_tzram_layout.total_size,
BL1_RO_BASE,
BL1_RO_LIMIT,
BL1_COHERENT_RAM_BASE,
BL1_COHERENT_RAM_LIMIT);
}
/*
* Function which will perform any remaining platform-specific setup that can
* occur after the MMU and data cache have been enabled.
*/
void bl1_platform_setup(void)
{
dw_mmc_params_t params;
assert((HIKEY_BL1_MMC_DESC_BASE >= SRAM_BASE) &&
((SRAM_BASE + SRAM_SIZE) >=
(HIKEY_BL1_MMC_DATA_BASE + HIKEY_BL1_MMC_DATA_SIZE)));
hikey_sp804_init();
hikey_gpio_init();
hikey_pmussi_init();
hikey_hi6553_init();
hikey_rtc_init();
hikey_mmc_pll_init();
memset(&params, 0, sizeof(dw_mmc_params_t));
params.reg_base = DWMMC0_BASE;
params.desc_base = HIKEY_BL1_MMC_DESC_BASE;
params.desc_size = 1 << 20;
params.clk_rate = 24 * 1000 * 1000;
params.bus_width = EMMC_BUS_WIDTH_8;
params.flags = EMMC_FLAG_CMD23;
dw_mmc_init(&params);
hikey_io_setup();
}
/*
* The following function checks if Firmware update is needed,
* by checking if TOC in FIP image is valid or not.
*/
unsigned int bl1_plat_get_next_image_id(void)
{
int32_t boot_mode;
unsigned int ret;
boot_mode = mmio_read_32(ONCHIPROM_PARAM_BASE);
switch (boot_mode) {
case BOOT_USB_DOWNLOAD:
case BOOT_UART_DOWNLOAD:
ret = NS_BL1U_IMAGE_ID;
break;
default:
WARN("Invalid boot mode is found:%d\n", boot_mode);
panic();
}
return ret;
}
image_desc_t *bl1_plat_get_image_desc(unsigned int image_id)
{
unsigned int index = 0;
while (bl1_tbbr_image_descs[index].image_id != INVALID_IMAGE_ID) {
if (bl1_tbbr_image_descs[index].image_id == image_id)
return &bl1_tbbr_image_descs[index];
index++;
}
return NULL;
}
void bl1_plat_set_ep_info(unsigned int image_id,
entry_point_info_t *ep_info)
{
uint64_t data = 0;
if (image_id == BL2_IMAGE_ID)
panic();
inv_dcache_range(NS_BL1U_BASE, NS_BL1U_SIZE);
__asm__ volatile ("mrs %0, cpacr_el1" : "=r"(data));
do {
data |= 3 << 20;
__asm__ volatile ("msr cpacr_el1, %0" : : "r"(data));
__asm__ volatile ("mrs %0, cpacr_el1" : "=r"(data));
} while ((data & (3 << 20)) != (3 << 20));
INFO("cpacr_el1:0x%lx\n", data);
ep_info->args.arg0 = 0xffff & read_mpidr();
ep_info->spsr = SPSR_64(MODE_EL1, MODE_SP_ELX,
DISABLE_ALL_EXCEPTIONS);
}