plat/layerscape/board/ls1043/include/platform_def.h - imx-atf - Git at Google

 /*
  * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */

 #ifndef PLATFORM_DEF_H
 #define PLATFORM_DEF_H

 #include <common_def.h>
 #include <tzc400.h>
 #include <utils.h>
 #include "ls_def.h"

 #define FIRMWARE_WELCOME_STR_LS1043	"Welcome to LS1043 BL1 Phase\n"
 #define FIRMWARE_WELCOME_STR_LS1043_BL2	"Welcome to LS1043 BL2 Phase\n"
 #define FIRMWARE_WELCOME_STR_LS1043_BL31 "Welcome to LS1043 BL31 Phase\n"
 #define FIRMWARE_WELCOME_STR_LS1043_BL32 "Welcome to LS1043 BL32 Phase, TSP\n"

 /* Required platform porting definitions */
 #define PLAT_PRIMARY_CPU		0x0
 #define PLAT_MAX_PWR_LVL		LS_PWR_LVL1
 #define PLATFORM_CORE_COUNT		4
 #define COUNTER_FREQUENCY		25000000	/* 25MHz */

 /*
  * Required LS standard platform porting definitions
  */
 #define PLAT_LS_CLUSTER_COUNT			1
 #define PLAT_LS1043_CCI_CLUSTER0_SL_IFACE_IX	4
 #define LS1043_CLUSTER_COUNT			1
 #define LS1043_MAX_CPUS_PER_CLUSTER		4

 #define LS_DRAM1_BASE			0x80000000
 #define LS_DRAM2_BASE			0x880000000
 #define LS_DRAM2_SIZE			0x780000000	/* 30G */
 #define LS_DRAM1_SIZE			0x80000000	/* 2G */
 #define LS_NS_DRAM_BASE			LS_DRAM1_BASE
 /* 64M Secure Memory, in fact there a 2M non-secure hole on top of it */
 #define LS_SECURE_DRAM_SIZE		(64 * 1024 * 1024)
 #define LS_SECURE_DRAM_BASE		(LS_NS_DRAM_BASE + LS_DRAM1_SIZE - \
 						LS_SECURE_DRAM_SIZE)
 #define LS_NS_DRAM_SIZE			(LS_DRAM1_SIZE - LS_SECURE_DRAM_SIZE)

 /*
  * By default, BL2 is in DDR memory.
  * If LS_BL2_IN_OCRAM is defined, BL2 will in OCRAM
  */
 /* #define LS_BL2_IN_OCRAM */

 #ifndef LS_BL2_IN_OCRAM
 /*
  * on top of SECURE memory is 2M non-secure hole for OPTee,
  *  1M secure memory below this hole will be used for BL2.
  */
 #define LS_BL2_DDR_BASE			(LS_SECURE_DRAM_BASE + \
 						LS_SECURE_DRAM_SIZE \
 						- 3 * 1024 * 1024)
 #endif

 #define PLAT_LS_CCSR_BASE		0x1000000
 #define PLAT_LS_CCSR_SIZE		0xF000000

 /* Flash base address, currently ROM is not used for TF-A images on LS platforms */
 #define PLAT_LS_TRUSTED_ROM_BASE	0x60100000
 #define PLAT_LS_TRUSTED_ROM_SIZE	0x20000000	/* Flash size */
 #define PLAT_LS_FLASH_SIZE		0x20000000
 #define PLAT_LS_FLASH_BASE		0x60000000

 #define LS_SRAM_BASE			0x10000000
 #define LS_SRAM_LIMIT			0x10020000	/* 128K */
 #define LS_SRAM_SHARED_SIZE		0x1000		/* 4K */
 #define LS_SRAM_SIZE			(LS_SRAM_LIMIT - LS_SRAM_BASE)
 #define LS_BL_RAM_BASE			(LS_SRAM_BASE + LS_SRAM_SHARED_SIZE)

 #define PLAT_LS_FIP_MAX_SIZE		0x4000000

 /* Memory Layout */

 #define BL1_RO_BASE			PLAT_LS_TRUSTED_ROM_BASE
 #define BL1_RO_LIMIT			(PLAT_LS_TRUSTED_ROM_BASE	\
 					 + PLAT_LS_TRUSTED_ROM_SIZE)
 #define PLAT_LS_FIP_BASE		0x60120000

 #ifdef LS_BL2_IN_OCRAM
 /* BL2 is in OCRAM */
 #define PLAT_LS_MAX_BL1_RW_SIZE		(52 * 1024)		/* 52K */
 #define PLAT_LS_MAX_BL31_SIZE		(64 * 1024)		/* 64K */
 #define PLAT_LS_MAX_BL2_SIZE		(44 * 1024)		/* 44K */
 /* Reserve memory in OCRAM for BL31 Text and ROData segment */
 #define BL31_TEXT_RODATA_SIZE		(32 * 1024)		/* 32K */
 #else /* LS_BL2_IN_OCRAM */
 /* BL2 in DDR */
 #define PLAT_LS_MAX_BL1_RW_SIZE		(64 * 1024)		/* 64K */
 #define PLAT_LS_MAX_BL31_SIZE		(64 * 1024)		/* 64K */
 #define PLAT_LS_MAX_BL2_SIZE		(1 * 1024 * 1024)	/* 1M */
 #endif /* LS_BL2_IN_OCRAM */
 /*
  * Put BL31 at the start of OCRAM.
  */
 #define BL31_BASE			LS_SRAM_BASE
 #define BL31_LIMIT			(LS_SRAM_BASE + PLAT_LS_MAX_BL31_SIZE)

 #ifdef LS_BL2_IN_OCRAM
 /*
  * BL2 follow BL31 Text and ROData region.
  */
 #define BL2_BASE			(BL31_BASE + BL31_TEXT_RODATA_SIZE)
 #define BL2_LIMIT			(BL2_BASE + PLAT_LS_MAX_BL2_SIZE)

 #else
 /*
  * BL2 in DDR memory.
  */
 #define BL2_BASE			LS_BL2_DDR_BASE
 #define BL2_LIMIT			(BL2_BASE + PLAT_LS_MAX_BL2_SIZE)

 #endif

 /*
  * Put BL1 RW at the top of the Trusted SRAM.
  */
 #ifdef LS_BL2_IN_OCRAM
 #define BL1_RW_BASE			BL2_LIMIT
 #else
 #define BL1_RW_BASE			BL31_LIMIT
 #endif
 #define BL1_RW_LIMIT			LS_SRAM_LIMIT

 /* Put BL32 in secure memory */
 #define BL32_BASE		LS_SECURE_DRAM_BASE
 #define BL32_LIMIT		(LS_SECURE_DRAM_BASE + LS_SECURE_DRAM_SIZE)
 /* BL33 memory region */
 #define BL33_BASE		0x82000000
 #define BL33_LIMIT		(LS_NS_DRAM_BASE + LS_NS_DRAM_SIZE)

 /*******************************************************************************
  * BL32 specific defines.
  ******************************************************************************/
 /*
  * On ARM standard platforms, the TSP can execute from Trusted SRAM,
  * Trusted DRAM (if available) or the DRAM region secured by the TrustZone
  * controller.
  */

 #define TSP_SEC_MEM_BASE		BL32_BASE
 #define TSP_SEC_MEM_SIZE		(BL32_LIMIT - BL32_BASE)

 /*
  * ID of the secure physical generic timer interrupt used by the TSP.
  */
 #define TSP_IRQ_SEC_PHY_TIMER		29


 /*
  * GIC related constants
  */
 #define PLAT_LS1043_CCI_BASE		0x01180000
 #define GICD_BASE			0x01401000
 #define GICC_BASE			0x01402000
 #define GICD_BASE_64K			0x01410000
 #define GICC_BASE_64K			0x01420000

 #define DCFG_CCSR_SVR			0x1ee00a4
 #define REV1_0				0x10
 #define REV1_1				0x11
 #define GIC_ADDR_BIT			31
 #define SCFG_GIC400_ALIGN		0x1570188

 /* UART related definition */

 #define PLAT_LS1043_DUART1_BASE		0x021c0000
 #define PLAT_LS1043_DUART2_BASE		0x021d0000
 #define PLAT_LS1043_DUART_SIZE		0x10000

 #define PLAT_LS1043_UART_BASE		0x21c0500
 #define PLAT_LS1043_UART2_BASE		0x21c0600
 #define PLAT_LS1043_UART_CLOCK		400000000
 #define PLAT_LS1043_UART_BAUDRATE	115200
 /* Define UART to be used by TF-A log */
 #define LS_TF_UART_BASE		PLAT_LS1043_UART_BASE
 #define LS_TF_UART_CLOCK		PLAT_LS1043_UART_CLOCK
 #define LS_TF_UART_BAUDRATE		PLAT_LS1043_UART_BAUDRATE

 #define LS1043_SYS_CNTCTL_BASE		0x2B00000

 #define CONFIG_SYS_IMMR			0x01000000
 #define CONFIG_SYS_FSL_CSU_ADDR		(CONFIG_SYS_IMMR + 0x00510000)

 /* Size of cacheable stacks */
 #if defined(IMAGE_BL1)
 #define PLATFORM_STACK_SIZE		0x440
 #define MAX_MMAP_REGIONS		6
 #define MAX_XLAT_TABLES			4
 #elif defined(IMAGE_BL2)
 #define PLATFORM_STACK_SIZE		0x400
 #define MAX_MMAP_REGIONS		8
 #define MAX_XLAT_TABLES			6
 #elif defined(IMAGE_BL31)
 #define PLATFORM_STACK_SIZE		0x400
 #define MAX_MMAP_REGIONS		8
 #define MAX_XLAT_TABLES			4
 #elif defined(IMAGE_BL32)
 #define PLATFORM_STACK_SIZE		0x440
 #define MAX_MMAP_REGIONS		8
 #define MAX_XLAT_TABLES			9
 #endif

 #define MAX_IO_DEVICES			3
 #define MAX_IO_HANDLES			4

 #endif /* PLATFORM_DEF_H */
	/*
	* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/

	#ifndef PLATFORM_DEF_H
	#define PLATFORM_DEF_H

	#include <common_def.h>
	#include <tzc400.h>
	#include <utils.h>
	#include "ls_def.h"

	#define FIRMWARE_WELCOME_STR_LS1043 "Welcome to LS1043 BL1 Phase\n"
	#define FIRMWARE_WELCOME_STR_LS1043_BL2 "Welcome to LS1043 BL2 Phase\n"
	#define FIRMWARE_WELCOME_STR_LS1043_BL31 "Welcome to LS1043 BL31 Phase\n"
	#define FIRMWARE_WELCOME_STR_LS1043_BL32 "Welcome to LS1043 BL32 Phase, TSP\n"

	/* Required platform porting definitions */
	#define PLAT_PRIMARY_CPU 0x0
	#define PLAT_MAX_PWR_LVL LS_PWR_LVL1
	#define PLATFORM_CORE_COUNT 4
	#define COUNTER_FREQUENCY 25000000 /* 25MHz */

	/*
	* Required LS standard platform porting definitions
	*/
	#define PLAT_LS_CLUSTER_COUNT 1
	#define PLAT_LS1043_CCI_CLUSTER0_SL_IFACE_IX 4
	#define LS1043_CLUSTER_COUNT 1
	#define LS1043_MAX_CPUS_PER_CLUSTER 4

	#define LS_DRAM1_BASE 0x80000000
	#define LS_DRAM2_BASE 0x880000000
	#define LS_DRAM2_SIZE 0x780000000 /* 30G */
	#define LS_DRAM1_SIZE 0x80000000 /* 2G */
	#define LS_NS_DRAM_BASE LS_DRAM1_BASE
	/* 64M Secure Memory, in fact there a 2M non-secure hole on top of it */
	#define LS_SECURE_DRAM_SIZE (64 * 1024 * 1024)
	#define LS_SECURE_DRAM_BASE (LS_NS_DRAM_BASE + LS_DRAM1_SIZE - \
	LS_SECURE_DRAM_SIZE)
	#define LS_NS_DRAM_SIZE (LS_DRAM1_SIZE - LS_SECURE_DRAM_SIZE)

	/*
	* By default, BL2 is in DDR memory.
	* If LS_BL2_IN_OCRAM is defined, BL2 will in OCRAM
	*/
	/* #define LS_BL2_IN_OCRAM */

	#ifndef LS_BL2_IN_OCRAM
	/*
	* on top of SECURE memory is 2M non-secure hole for OPTee,
	* 1M secure memory below this hole will be used for BL2.
	*/
	#define LS_BL2_DDR_BASE (LS_SECURE_DRAM_BASE + \
	LS_SECURE_DRAM_SIZE \
	- 3 * 1024 * 1024)
	#endif

	#define PLAT_LS_CCSR_BASE 0x1000000
	#define PLAT_LS_CCSR_SIZE 0xF000000

	/* Flash base address, currently ROM is not used for TF-A images on LS platforms */
	#define PLAT_LS_TRUSTED_ROM_BASE 0x60100000
	#define PLAT_LS_TRUSTED_ROM_SIZE 0x20000000 /* Flash size */
	#define PLAT_LS_FLASH_SIZE 0x20000000
	#define PLAT_LS_FLASH_BASE 0x60000000

	#define LS_SRAM_BASE 0x10000000
	#define LS_SRAM_LIMIT 0x10020000 /* 128K */
	#define LS_SRAM_SHARED_SIZE 0x1000 /* 4K */
	#define LS_SRAM_SIZE (LS_SRAM_LIMIT - LS_SRAM_BASE)
	#define LS_BL_RAM_BASE (LS_SRAM_BASE + LS_SRAM_SHARED_SIZE)

	#define PLAT_LS_FIP_MAX_SIZE 0x4000000

	/* Memory Layout */

	#define BL1_RO_BASE PLAT_LS_TRUSTED_ROM_BASE
	#define BL1_RO_LIMIT (PLAT_LS_TRUSTED_ROM_BASE \
	+ PLAT_LS_TRUSTED_ROM_SIZE)
	#define PLAT_LS_FIP_BASE 0x60120000

	#ifdef LS_BL2_IN_OCRAM
	/* BL2 is in OCRAM */
	#define PLAT_LS_MAX_BL1_RW_SIZE (52 * 1024) /* 52K */
	#define PLAT_LS_MAX_BL31_SIZE (64 * 1024) /* 64K */
	#define PLAT_LS_MAX_BL2_SIZE (44 * 1024) /* 44K */
	/* Reserve memory in OCRAM for BL31 Text and ROData segment */
	#define BL31_TEXT_RODATA_SIZE (32 * 1024) /* 32K */
	#else /* LS_BL2_IN_OCRAM */
	/* BL2 in DDR */
	#define PLAT_LS_MAX_BL1_RW_SIZE (64 * 1024) /* 64K */
	#define PLAT_LS_MAX_BL31_SIZE (64 * 1024) /* 64K */
	#define PLAT_LS_MAX_BL2_SIZE (1 * 1024 * 1024) /* 1M */
	#endif /* LS_BL2_IN_OCRAM */
	/*
	* Put BL31 at the start of OCRAM.
	*/
	#define BL31_BASE LS_SRAM_BASE
	#define BL31_LIMIT (LS_SRAM_BASE + PLAT_LS_MAX_BL31_SIZE)

	#ifdef LS_BL2_IN_OCRAM
	/*
	* BL2 follow BL31 Text and ROData region.
	*/
	#define BL2_BASE (BL31_BASE + BL31_TEXT_RODATA_SIZE)
	#define BL2_LIMIT (BL2_BASE + PLAT_LS_MAX_BL2_SIZE)

	#else
	/*
	* BL2 in DDR memory.
	*/
	#define BL2_BASE LS_BL2_DDR_BASE
	#define BL2_LIMIT (BL2_BASE + PLAT_LS_MAX_BL2_SIZE)

	#endif

	/*
	* Put BL1 RW at the top of the Trusted SRAM.
	*/
	#ifdef LS_BL2_IN_OCRAM
	#define BL1_RW_BASE BL2_LIMIT
	#else
	#define BL1_RW_BASE BL31_LIMIT
	#endif
	#define BL1_RW_LIMIT LS_SRAM_LIMIT

	/* Put BL32 in secure memory */
	#define BL32_BASE LS_SECURE_DRAM_BASE
	#define BL32_LIMIT (LS_SECURE_DRAM_BASE + LS_SECURE_DRAM_SIZE)
	/* BL33 memory region */
	#define BL33_BASE 0x82000000
	#define BL33_LIMIT (LS_NS_DRAM_BASE + LS_NS_DRAM_SIZE)

	/*******************************************************************************
	* BL32 specific defines.
	******************************************************************************/
	/*
	* On ARM standard platforms, the TSP can execute from Trusted SRAM,
	* Trusted DRAM (if available) or the DRAM region secured by the TrustZone
	* controller.
	*/

	#define TSP_SEC_MEM_BASE BL32_BASE
	#define TSP_SEC_MEM_SIZE (BL32_LIMIT - BL32_BASE)

	/*
	* ID of the secure physical generic timer interrupt used by the TSP.
	*/
	#define TSP_IRQ_SEC_PHY_TIMER 29


	/*
	* GIC related constants
	*/
	#define PLAT_LS1043_CCI_BASE 0x01180000
	#define GICD_BASE 0x01401000
	#define GICC_BASE 0x01402000
	#define GICD_BASE_64K 0x01410000
	#define GICC_BASE_64K 0x01420000

	#define DCFG_CCSR_SVR 0x1ee00a4
	#define REV1_0 0x10
	#define REV1_1 0x11
	#define GIC_ADDR_BIT 31
	#define SCFG_GIC400_ALIGN 0x1570188

	/* UART related definition */

	#define PLAT_LS1043_DUART1_BASE 0x021c0000
	#define PLAT_LS1043_DUART2_BASE 0x021d0000
	#define PLAT_LS1043_DUART_SIZE 0x10000

	#define PLAT_LS1043_UART_BASE 0x21c0500
	#define PLAT_LS1043_UART2_BASE 0x21c0600
	#define PLAT_LS1043_UART_CLOCK 400000000
	#define PLAT_LS1043_UART_BAUDRATE 115200
	/* Define UART to be used by TF-A log */
	#define LS_TF_UART_BASE PLAT_LS1043_UART_BASE
	#define LS_TF_UART_CLOCK PLAT_LS1043_UART_CLOCK
	#define LS_TF_UART_BAUDRATE PLAT_LS1043_UART_BAUDRATE

	#define LS1043_SYS_CNTCTL_BASE 0x2B00000

	#define CONFIG_SYS_IMMR 0x01000000
	#define CONFIG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR + 0x00510000)

	/* Size of cacheable stacks */
	#if defined(IMAGE_BL1)
	#define PLATFORM_STACK_SIZE 0x440
	#define MAX_MMAP_REGIONS 6
	#define MAX_XLAT_TABLES 4
	#elif defined(IMAGE_BL2)
	#define PLATFORM_STACK_SIZE 0x400
	#define MAX_MMAP_REGIONS 8
	#define MAX_XLAT_TABLES 6
	#elif defined(IMAGE_BL31)
	#define PLATFORM_STACK_SIZE 0x400
	#define MAX_MMAP_REGIONS 8
	#define MAX_XLAT_TABLES 4
	#elif defined(IMAGE_BL32)
	#define PLATFORM_STACK_SIZE 0x440
	#define MAX_MMAP_REGIONS 8
	#define MAX_XLAT_TABLES 9
	#endif

	#define MAX_IO_DEVICES 3
	#define MAX_IO_HANDLES 4

	#endif /* PLATFORM_DEF_H */