| /* |
| * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| #ifndef __V2M_DEF_H__ |
| #define __V2M_DEF_H__ |
| |
| #include <arm_xlat_tables.h> |
| |
| |
| /* V2M motherboard system registers & offsets */ |
| #define V2M_SYSREGS_BASE 0x1c010000 |
| #define V2M_SYS_ID 0x0 |
| #define V2M_SYS_SWITCH 0x4 |
| #define V2M_SYS_LED 0x8 |
| #define V2M_SYS_NVFLAGS 0x38 |
| #define V2M_SYS_NVFLAGSSET 0x38 |
| #define V2M_SYS_NVFLAGSCLR 0x3c |
| #define V2M_SYS_CFGDATA 0xa0 |
| #define V2M_SYS_CFGCTRL 0xa4 |
| #define V2M_SYS_CFGSTATUS 0xa8 |
| |
| #define V2M_CFGCTRL_START (1 << 31) |
| #define V2M_CFGCTRL_RW (1 << 30) |
| #define V2M_CFGCTRL_FUNC_SHIFT 20 |
| #define V2M_CFGCTRL_FUNC(fn) (fn << V2M_CFGCTRL_FUNC_SHIFT) |
| #define V2M_FUNC_CLK_GEN 0x01 |
| #define V2M_FUNC_TEMP 0x04 |
| #define V2M_FUNC_DB_RESET 0x05 |
| #define V2M_FUNC_SCC_CFG 0x06 |
| #define V2M_FUNC_SHUTDOWN 0x08 |
| #define V2M_FUNC_REBOOT 0x09 |
| |
| /* NVFLAGS in the V2M motherboard which is preserved after a watchdog reset */ |
| #define V2M_SYS_NVFLAGS_ADDR (V2M_SYSREGS_BASE + V2M_SYS_NVFLAGS) |
| |
| /* |
| * V2M sysled bit definitions. The values written to this |
| * register are defined in arch.h & runtime_svc.h. Only |
| * used by the primary cpu to diagnose any cold boot issues. |
| * |
| * SYS_LED[0] - Security state (S=0/NS=1) |
| * SYS_LED[2:1] - Exception Level (EL3-EL0) |
| * SYS_LED[7:3] - Exception Class (Sync/Async & origin) |
| * |
| */ |
| #define V2M_SYS_LED_SS_SHIFT 0x0 |
| #define V2M_SYS_LED_EL_SHIFT 0x1 |
| #define V2M_SYS_LED_EC_SHIFT 0x3 |
| |
| #define V2M_SYS_LED_SS_MASK 0x1 |
| #define V2M_SYS_LED_EL_MASK 0x3 |
| #define V2M_SYS_LED_EC_MASK 0x1f |
| |
| /* V2M sysid register bits */ |
| #define V2M_SYS_ID_REV_SHIFT 28 |
| #define V2M_SYS_ID_HBI_SHIFT 16 |
| #define V2M_SYS_ID_BLD_SHIFT 12 |
| #define V2M_SYS_ID_ARCH_SHIFT 8 |
| #define V2M_SYS_ID_FPGA_SHIFT 0 |
| |
| #define V2M_SYS_ID_REV_MASK 0xf |
| #define V2M_SYS_ID_HBI_MASK 0xfff |
| #define V2M_SYS_ID_BLD_MASK 0xf |
| #define V2M_SYS_ID_ARCH_MASK 0xf |
| #define V2M_SYS_ID_FPGA_MASK 0xff |
| |
| #define V2M_SYS_ID_BLD_LENGTH 4 |
| |
| |
| /* NOR Flash */ |
| #define V2M_FLASH0_BASE 0x08000000 |
| #define V2M_FLASH0_SIZE 0x04000000 |
| #define V2M_FLASH_BLOCK_SIZE 0x00040000 /* 256 KB */ |
| |
| #define V2M_IOFPGA_BASE 0x1c000000 |
| #define V2M_IOFPGA_SIZE 0x03000000 |
| |
| /* PL011 UART related constants */ |
| #define V2M_IOFPGA_UART0_BASE 0x1c090000 |
| #define V2M_IOFPGA_UART1_BASE 0x1c0a0000 |
| #define V2M_IOFPGA_UART2_BASE 0x1c0b0000 |
| #define V2M_IOFPGA_UART3_BASE 0x1c0c0000 |
| |
| #define V2M_IOFPGA_UART0_CLK_IN_HZ 24000000 |
| #define V2M_IOFPGA_UART1_CLK_IN_HZ 24000000 |
| #define V2M_IOFPGA_UART2_CLK_IN_HZ 24000000 |
| #define V2M_IOFPGA_UART3_CLK_IN_HZ 24000000 |
| |
| /* SP804 timer related constants */ |
| #define V2M_SP804_TIMER0_BASE 0x1C110000 |
| #define V2M_SP804_TIMER1_BASE 0x1C120000 |
| |
| /* SP810 controller */ |
| #define V2M_SP810_BASE 0x1c020000 |
| #define V2M_SP810_CTRL_TIM0_SEL (1 << 15) |
| #define V2M_SP810_CTRL_TIM1_SEL (1 << 17) |
| #define V2M_SP810_CTRL_TIM2_SEL (1 << 19) |
| #define V2M_SP810_CTRL_TIM3_SEL (1 << 21) |
| |
| /* |
| * The flash can be mapped either as read-only or read-write. |
| * |
| * If it is read-write then it should also be mapped as device memory because |
| * NOR flash programming involves sending a fixed, ordered sequence of commands. |
| * |
| * If it is read-only then it should also be mapped as: |
| * - Normal memory, because reading from NOR flash is transparent, it is like |
| * reading from RAM. |
| * - Non-executable by default. If some parts of the flash need to be executable |
| * then platform code is responsible for re-mapping the appropriate portion |
| * of it as executable. |
| */ |
| #define V2M_MAP_FLASH0_RW MAP_REGION_FLAT(V2M_FLASH0_BASE,\ |
| V2M_FLASH0_SIZE, \ |
| MT_DEVICE | MT_RW | MT_SECURE) |
| |
| #define V2M_MAP_FLASH0_RO MAP_REGION_FLAT(V2M_FLASH0_BASE,\ |
| V2M_FLASH0_SIZE, \ |
| MT_RO_DATA | MT_SECURE) |
| |
| #define V2M_MAP_IOFPGA MAP_REGION_FLAT(V2M_IOFPGA_BASE,\ |
| V2M_IOFPGA_SIZE, \ |
| MT_DEVICE | MT_RW | MT_SECURE) |
| |
| /* Region equivalent to V2M_MAP_IOFPGA suitable for mapping at EL0 */ |
| #define V2M_MAP_IOFPGA_EL0 MAP_REGION_FLAT( \ |
| V2M_IOFPGA_BASE, \ |
| V2M_IOFPGA_SIZE, \ |
| MT_DEVICE | MT_RW | MT_SECURE | MT_USER) |
| |
| |
| #endif /* __V2M_DEF_H__ */ |
