blob: a8747f181a9cb7f330cbea74c450d50351d5aa08 [file] [log] [blame]
/*
* Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <board_css_def.h>
#include <mmio.h>
#include <nic_400.h>
#include <platform_def.h>
#include <soc_css_def.h>
void soc_css_init_nic400(void)
{
/*
* NIC-400 Access Control Initialization
*
* Define access privileges by setting each corresponding bit to:
* 0 = Secure access only
* 1 = Non-secure access allowed
*/
/*
* Allow non-secure access to some SOC regions, excluding UART1, which
* remains secure.
* Note: This is the NIC-400 device on the SOC
*/
mmio_write_32(SOC_CSS_NIC400_BASE +
NIC400_ADDR_CTRL_SECURITY_REG(SOC_CSS_NIC400_USB_EHCI), ~0);
mmio_write_32(SOC_CSS_NIC400_BASE +
NIC400_ADDR_CTRL_SECURITY_REG(SOC_CSS_NIC400_TLX_MASTER), ~0);
mmio_write_32(SOC_CSS_NIC400_BASE +
NIC400_ADDR_CTRL_SECURITY_REG(SOC_CSS_NIC400_USB_OHCI), ~0);
mmio_write_32(SOC_CSS_NIC400_BASE +
NIC400_ADDR_CTRL_SECURITY_REG(SOC_CSS_NIC400_PL354_SMC), ~0);
mmio_write_32(SOC_CSS_NIC400_BASE +
NIC400_ADDR_CTRL_SECURITY_REG(SOC_CSS_NIC400_APB4_BRIDGE), ~0);
mmio_write_32(SOC_CSS_NIC400_BASE +
NIC400_ADDR_CTRL_SECURITY_REG(SOC_CSS_NIC400_BOOTSEC_BRIDGE),
~SOC_CSS_NIC400_BOOTSEC_BRIDGE_UART1);
}
#define PCIE_SECURE_REG 0x3000
/* Mask uses REG and MEM access bits */
#define PCIE_SEC_ACCESS_MASK ((1 << 0) | (1 << 1))
void soc_css_init_pcie(void)
{
#if !PLAT_juno
/*
* Do not initialize PCIe in emulator environment.
* Platform ID register not supported on Juno
*/
if (BOARD_CSS_GET_PLAT_TYPE(BOARD_CSS_PLAT_ID_REG_ADDR) ==
BOARD_CSS_PLAT_TYPE_EMULATOR)
return;
#endif /* PLAT_juno */
/*
* PCIE Root Complex Security settings to enable non-secure
* access to config registers.
*/
mmio_write_32(SOC_CSS_PCIE_CONTROL_BASE + PCIE_SECURE_REG,
PCIE_SEC_ACCESS_MASK);
}