blob: 39dfd113820816b090782ac841ba01b1f63afd13 [file] [log] [blame]
/*
* Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <pmu_regs.h>
#include "rk3399_mcu.h"
#define M0_SCR 0xe000ed10 /* System Control Register (SCR) */
#define SCR_SLEEPDEEP_SHIFT (1 << 2)
__attribute__((noreturn)) void main(void)
{
unsigned int status_value;
/*
* PMU sometimes doesn't clear power mode bit as it's supposed to due
* to a hardware bug. Make the M0 clear it manually to be sure,
* otherwise interrupts some cases with concurrent wake interrupts
* we stay asleep forever.
*/
while (1) {
status_value = mmio_read_32(PMU_BASE + PMU_POWER_ST);
if (status_value) {
mmio_clrbits_32(PMU_BASE + PMU_PWRMODE_CON, 0x01);
break;
}
}
/*
* FSM power secquence is .. -> ST_INPUT_CLAMP(step.17) -> .. ->
* ST_WAKEUP_RESET -> ST_EXT_PWRUP-> ST_RELEASE_CLAMP ->
* ST_24M_OSC_EN -> .. -> ST_WAKEUP_RESET_CLR(step.26) -> ..,
* INPUT_CLAMP and WAKEUP_RESET will hold the SOC not affect by
* power or other single glitch, but WAKEUP_RESET need work with 24MHz,
* so between RELEASE_CLAMP and 24M_OSC_EN, there have a chance
* that glitch will affect SOC, and mess up SOC status, so we
* addressmap_shared software clamp between ST_INPUT_CLAMP and
* ST_WAKEUP_RESET_CLR to avoid this happen.
*/
while (1) {
status_value = mmio_read_32(PMU_BASE + PMU_POWER_ST);
if (status_value >= 17) {
mmio_setbits_32(PMU_BASE + PMU_SFT_CON, 0x02);
break;
}
}
while (1) {
status_value = mmio_read_32(PMU_BASE + PMU_POWER_ST);
if (status_value >= 26) {
mmio_clrbits_32(PMU_BASE + PMU_SFT_CON, 0x02);
break;
}
}
for (;;)
__asm__ volatile ("wfi");
}