blob: 44ab95365e0303ffa3c4825eaa6045a9f2c0ce99 [file] [log] [blame]
/*
* Copyright (c) 2014-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __PLATFORM_DEF_H__
#define __PLATFORM_DEF_H__
/* Enable the dynamic translation tables library. */
#ifdef AARCH32
# if defined(IMAGE_BL32) && RESET_TO_SP_MIN
# define PLAT_XLAT_TABLES_DYNAMIC 1
# endif
#else
# if defined(IMAGE_BL31) && RESET_TO_BL31
# define PLAT_XLAT_TABLES_DYNAMIC 1
# endif
#endif /* AARCH32 */
#include <arm_def.h>
#include <arm_spm_def.h>
#include <board_arm_def.h>
#include <common_def.h>
#include <tzc400.h>
#include <utils_def.h>
#include <v2m_def.h>
#include "../fvp_def.h"
/* Required platform porting definitions */
#define PLATFORM_CORE_COUNT \
(FVP_CLUSTER_COUNT * FVP_MAX_CPUS_PER_CLUSTER * FVP_MAX_PE_PER_CPU)
#define PLAT_NUM_PWR_DOMAINS (FVP_CLUSTER_COUNT + \
PLATFORM_CORE_COUNT) + 1
#define PLAT_MAX_PWR_LVL ARM_PWR_LVL2
/*
* Other platform porting definitions are provided by included headers
*/
/*
* Required ARM standard platform porting definitions
*/
#define PLAT_ARM_CLUSTER_COUNT FVP_CLUSTER_COUNT
#define PLAT_ARM_TRUSTED_ROM_BASE 0x00000000
#define PLAT_ARM_TRUSTED_ROM_SIZE 0x04000000 /* 64 MB */
#define PLAT_ARM_TRUSTED_DRAM_BASE 0x06000000
#define PLAT_ARM_TRUSTED_DRAM_SIZE 0x02000000 /* 32 MB */
/* virtual address used by dynamic mem_protect for chunk_base */
#define PLAT_ARM_MEM_PROTEC_VA_FRAME 0xc0000000
/* No SCP in FVP */
#define PLAT_ARM_SCP_TZC_DRAM1_SIZE ULL(0x0)
#define PLAT_ARM_DRAM2_SIZE ULL(0x80000000)
/*
* Load address of BL33 for this platform port
*/
#define PLAT_ARM_NS_IMAGE_OFFSET (ARM_DRAM1_BASE + U(0x8000000))
/*
* PL011 related constants
*/
#define PLAT_ARM_BOOT_UART_BASE V2M_IOFPGA_UART0_BASE
#define PLAT_ARM_BOOT_UART_CLK_IN_HZ V2M_IOFPGA_UART0_CLK_IN_HZ
#define PLAT_ARM_BL31_RUN_UART_BASE V2M_IOFPGA_UART1_BASE
#define PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ V2M_IOFPGA_UART1_CLK_IN_HZ
#define PLAT_ARM_SP_MIN_RUN_UART_BASE V2M_IOFPGA_UART1_BASE
#define PLAT_ARM_SP_MIN_RUN_UART_CLK_IN_HZ V2M_IOFPGA_UART1_CLK_IN_HZ
#define PLAT_ARM_CRASH_UART_BASE PLAT_ARM_BL31_RUN_UART_BASE
#define PLAT_ARM_CRASH_UART_CLK_IN_HZ PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ
#define PLAT_ARM_TSP_UART_BASE V2M_IOFPGA_UART2_BASE
#define PLAT_ARM_TSP_UART_CLK_IN_HZ V2M_IOFPGA_UART2_CLK_IN_HZ
#define PLAT_FVP_SMMUV3_BASE 0x2b400000
/* CCI related constants */
#define PLAT_FVP_CCI400_BASE 0x2c090000
#define PLAT_FVP_CCI400_CLUS0_SL_PORT 3
#define PLAT_FVP_CCI400_CLUS1_SL_PORT 4
/* CCI-500/CCI-550 on Base platform */
#define PLAT_FVP_CCI5XX_BASE 0x2a000000
#define PLAT_FVP_CCI5XX_CLUS0_SL_PORT 5
#define PLAT_FVP_CCI5XX_CLUS1_SL_PORT 6
/* CCN related constants. Only CCN 502 is currently supported */
#define PLAT_ARM_CCN_BASE 0x2e000000
#define PLAT_ARM_CLUSTER_TO_CCN_ID_MAP 1, 5, 7, 11
/* System timer related constants */
#define PLAT_ARM_NSTIMER_FRAME_ID 1
/* Mailbox base address */
#define PLAT_ARM_TRUSTED_MAILBOX_BASE ARM_TRUSTED_SRAM_BASE
/* TrustZone controller related constants
*
* Currently only filters 0 and 2 are connected on Base FVP.
* Filter 0 : CPU clusters (no access to DRAM by default)
* Filter 1 : not connected
* Filter 2 : LCDs (access to VRAM allowed by default)
* Filter 3 : not connected
* Programming unconnected filters will have no effect at the
* moment. These filter could, however, be connected in future.
* So care should be taken not to configure the unused filters.
*
* Allow only non-secure access to all DRAM to supported devices.
* Give access to the CPUs and Virtio. Some devices
* would normally use the default ID so allow that too.
*/
#define PLAT_ARM_TZC_BASE 0x2a4a0000
#define PLAT_ARM_TZC_FILTERS TZC_400_REGION_ATTR_FILTER_BIT(0)
#define PLAT_ARM_TZC_NS_DEV_ACCESS ( \
TZC_REGION_ACCESS_RDWR(FVP_NSAID_DEFAULT) | \
TZC_REGION_ACCESS_RDWR(FVP_NSAID_PCI) | \
TZC_REGION_ACCESS_RDWR(FVP_NSAID_AP) | \
TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO) | \
TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO_OLD))
/*
* GIC related constants to cater for both GICv2 and GICv3 instances of an
* FVP. They could be overriden at runtime in case the FVP implements the legacy
* VE memory map.
*/
#define PLAT_ARM_GICD_BASE BASE_GICD_BASE
#define PLAT_ARM_GICR_BASE BASE_GICR_BASE
#define PLAT_ARM_GICC_BASE BASE_GICC_BASE
/*
* Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
* terminology. On a GICv2 system or mode, the lists will be merged and treated
* as Group 0 interrupts.
*/
#define PLAT_ARM_G1S_IRQ_PROPS(grp) \
ARM_G1S_IRQ_PROPS(grp), \
INTR_PROP_DESC(FVP_IRQ_TZ_WDOG, GIC_HIGHEST_SEC_PRIORITY, grp, \
GIC_INTR_CFG_LEVEL), \
INTR_PROP_DESC(FVP_IRQ_SEC_SYS_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
GIC_INTR_CFG_LEVEL)
#define PLAT_ARM_G0_IRQ_PROPS(grp) ARM_G0_IRQ_PROPS(grp)
#define PLAT_ARM_PRIVATE_SDEI_EVENTS ARM_SDEI_PRIVATE_EVENTS
#define PLAT_ARM_SHARED_SDEI_EVENTS ARM_SDEI_SHARED_EVENTS
#define PLAT_ARM_SP_IMAGE_STACK_BASE (ARM_SP_IMAGE_NS_BUF_BASE + \
ARM_SP_IMAGE_NS_BUF_SIZE)
#endif /* __PLATFORM_DEF_H__ */