| # |
| # Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved. |
| # |
| # SPDX-License-Identifier: BSD-3-Clause |
| # |
| |
| include lib/xlat_tables_v2/xlat_tables.mk |
| |
| AW_PLAT := plat/allwinner |
| |
| PLAT_INCLUDES := -Iinclude/plat/arm/common/ \ |
| -Iinclude/plat/arm/common/aarch64 \ |
| -I${AW_PLAT}/common/include \ |
| -I${AW_PLAT}/${PLAT}/include |
| |
| PLAT_BL_COMMON_SOURCES := drivers/console/${ARCH}/console.S \ |
| drivers/ti/uart/${ARCH}/16550_console.S \ |
| ${XLAT_TABLES_LIB_SRCS} \ |
| ${AW_PLAT}/common/plat_helpers.S \ |
| ${AW_PLAT}/common/sunxi_common.c |
| |
| BL31_SOURCES += drivers/arm/gic/common/gic_common.c \ |
| drivers/arm/gic/v2/gicv2_helpers.c \ |
| drivers/arm/gic/v2/gicv2_main.c \ |
| drivers/delay_timer/delay_timer.c \ |
| drivers/delay_timer/generic_delay_timer.c \ |
| lib/cpus/${ARCH}/cortex_a53.S \ |
| plat/common/plat_gicv2.c \ |
| plat/common/plat_psci_common.c \ |
| ${AW_PLAT}/common/sunxi_bl31_setup.c \ |
| ${AW_PLAT}/common/sunxi_cpu_ops.c \ |
| ${AW_PLAT}/common/sunxi_pm.c \ |
| ${AW_PLAT}/sun50i_a64/sunxi_power.c \ |
| ${AW_PLAT}/common/sunxi_security.c \ |
| ${AW_PLAT}/common/sunxi_topology.c |
| |
| # The bootloader is guaranteed to only run on CPU 0 by the boot ROM. |
| COLD_BOOT_SINGLE_CPU := 1 |
| |
| # Enable workarounds for Cortex-A53 errata. Allwinner uses at least r0p4. |
| ERRATA_A53_835769 := 1 |
| ERRATA_A53_843419 := 1 |
| ERRATA_A53_855873 := 1 |
| |
| MULTI_CONSOLE_API := 1 |
| |
| # The reset vector can be changed for each CPU. |
| PROGRAMMABLE_RESET_ADDRESS := 1 |
| |
| # Allow mapping read-only data as execute-never. |
| SEPARATE_CODE_AND_RODATA := 1 |
| |
| # BL31 gets loaded alongside BL33 (U-Boot) by U-Boot's SPL |
| RESET_TO_BL31 := 1 |
