blob: 0e26c3df2e8330f69d8a7d18044980c98d57b013 [file] [log] [blame]
/*
* Copyright (c) 2014-2016, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __CSS_SCPI_H__
#define __CSS_SCPI_H__
#include <stddef.h>
#include <stdint.h>
/*
* An SCPI command consists of a header and a payload.
* The following structure describes the header. It is 64-bit long.
*/
typedef struct {
/* Command ID */
uint32_t id : 7;
/* Set ID. Identifies whether this is a standard or extended command. */
uint32_t set : 1;
/* Sender ID to match a reply. The value is sender specific. */
uint32_t sender : 8;
/* Size of the payload in bytes (0 - 511) */
uint32_t size : 9;
uint32_t reserved : 7;
/*
* Status indicating the success of a command.
* See the enum below.
*/
uint32_t status;
} scpi_cmd_t;
typedef enum {
SCPI_SET_NORMAL = 0, /* Normal SCPI commands */
SCPI_SET_EXTENDED /* Extended SCPI commands */
} scpi_set_t;
enum {
SCP_OK = 0, /* Success */
SCP_E_PARAM, /* Invalid parameter(s) */
SCP_E_ALIGN, /* Invalid alignment */
SCP_E_SIZE, /* Invalid size */
SCP_E_HANDLER, /* Invalid handler or callback */
SCP_E_ACCESS, /* Invalid access or permission denied */
SCP_E_RANGE, /* Value out of range */
SCP_E_TIMEOUT, /* Time out has ocurred */
SCP_E_NOMEM, /* Invalid memory area or pointer */
SCP_E_PWRSTATE, /* Invalid power state */
SCP_E_SUPPORT, /* Feature not supported or disabled */
SCPI_E_DEVICE, /* Device error */
SCPI_E_BUSY, /* Device is busy */
};
typedef uint32_t scpi_status_t;
typedef enum {
SCPI_CMD_SCP_READY = 0x01,
SCPI_CMD_SET_CSS_POWER_STATE = 0x03,
SCPI_CMD_GET_CSS_POWER_STATE = 0x04,
SCPI_CMD_SYS_POWER_STATE = 0x05
} scpi_command_t;
/*
* Macros to parse SCP response to GET_CSS_POWER_STATE command
*
* [3:0] : cluster ID
* [7:4] : cluster state: 0 = on; 3 = off; rest are reserved
* [15:8]: on/off state for individual CPUs in the cluster
*
* Payload is in little-endian
*/
#define CLUSTER_ID(_resp) ((_resp) & 0xf)
#define CLUSTER_POWER_STATE(_resp) (((_resp) >> 4) & 0xf)
/* Result is a bit mask of CPU on/off states in the cluster */
#define CPU_POWER_STATE(_resp) (((_resp) >> 8) & 0xff)
/*
* For GET_CSS_POWER_STATE, SCP returns the power states of every cluster. The
* size of response depends on the number of clusters in the system. The
* SCP-to-AP payload contains 2 bytes per cluster. Make sure the response is
* large enough to contain power states of a given cluster
*/
#define CHECK_RESPONSE(_resp, _clus) \
(_resp.size >= (((_clus) + 1) * 2))
typedef enum {
scpi_power_on = 0,
scpi_power_retention = 1,
scpi_power_off = 3,
} scpi_power_state_t;
typedef enum {
scpi_system_shutdown = 0,
scpi_system_reboot = 1,
scpi_system_reset = 2
} scpi_system_state_t;
extern int scpi_wait_ready(void);
extern void scpi_set_css_power_state(unsigned int mpidr,
scpi_power_state_t cpu_state,
scpi_power_state_t cluster_state,
scpi_power_state_t css_state);
int scpi_get_css_power_state(unsigned int mpidr, unsigned int *cpu_state_p,
unsigned int *cluster_state_p);
uint32_t scpi_sys_power_state(scpi_system_state_t system_state);
#endif /* __CSS_SCPI_H__ */